From 7b8b8de3a34d59ef6264a86ce55e95c07c294940 Mon Sep 17 00:00:00 2001 From: Mashrab Kuvatov Date: Sun, 9 Dec 2007 20:55:30 +0000 Subject: Renamed Uzbek translations to follow the libc standard. Aproved by Pixel. For details, see bug #35090. --- perl-install/install/help/po/uz.po | 87 +- perl-install/install/help/po/uz@Latn.po | 1142 --------------------------- perl-install/install/help/po/uz@cyrillic.po | 1141 ++++++++++++++++++++++++++ 3 files changed, 1185 insertions(+), 1185 deletions(-) delete mode 100644 perl-install/install/help/po/uz@Latn.po create mode 100644 perl-install/install/help/po/uz@cyrillic.po (limited to 'perl-install/install/help') diff --git a/perl-install/install/help/po/uz.po b/perl-install/install/help/po/uz.po index f11696d44..6608ada4c 100644 --- a/perl-install/install/help/po/uz.po +++ b/perl-install/install/help/po/uz.po @@ -24,10 +24,10 @@ msgid "" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" -"Давом этишдан олдин лицензиянинг шартларини эътибор билан ўқиб\n" -"чиқинг. Лицензия бутун Mandriva Linux'га тегишли. Агар унинг барча\n" -"шартларига рози бўлсангиз, \"%s\"ни танланг. Агар рози бўлмасангиз,\n" -"компьютерни ўчириб-ёқиш учун \"%s\" тугмасини босинг." +"Davom etishdan oldin litsenziyaning shartlarini e'tibor bilan o'qib\n" +"chiqing. Litsenziya butun Mandriva Linux'ga tegishli. Agar uning barcha\n" +"shartlariga rozi bo'lsangiz, \"%s\"ni tanlang. Agar rozi bo'lmasangiz,\n" +"kompyuterni o'chirib-yoqish uchun \"%s\" tugmasini bosing." #: ../help.pm:20 #, c-format @@ -73,7 +73,7 @@ msgstr "" #: ../help.pm:54 #, c-format msgid "Do you want to use this feature?" -msgstr "Бу қулайликдан фойдаланишни истайсизми?" +msgstr "Bu qulaylikdan foydalanishni istaysizmi?" #: ../help.pm:57 #, c-format @@ -118,11 +118,12 @@ msgid "" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" -"Mandriva Linux бир нечта компакт-дискларда тарқатилади. Агар танланган " -"пакет\n" -"бошқа компакт-дискда жойлашган бўлса, DrakX жорий компакт-дискни\n" -"чиқаради ва тегишлисини қўйишни сўрайди. Агар сўралган компакт-диск сизда\n" -"бўлмаса, \"%s\" тугмасини босинг. Бу ҳолда, тегишли пакетлар ўрнатилмайди." +"Mandriva Linux bir nechta kompakt-disklarda tarqatiladi. Agar tanlangan " +"paket\n" +"boshqa kompakt-diskda joylashgan bo'lsa, DrakX joriy kompakt-diskni\n" +"chiqaradi va tegishlisini qo'yishni so'raydi. Agar so'ralgan kompakt-disk " +"sizda\n" +"bo'lmasa, \"%s\" tugmasini bosing. Bu holda, tegishli paketlar o'rnatilmaydi." #: ../help.pm:95 #, c-format @@ -188,17 +189,17 @@ msgstr "" #: ../help.pm:149 ../help.pm:591 #, c-format msgid "Upgrade" -msgstr "Янгилаш" +msgstr "Yangilash" #: ../help.pm:149 #, c-format msgid "With basic documentation" -msgstr "Асосий қўлланмалар билан" +msgstr "Asosiy qo'llanmalar bilan" #: ../help.pm:149 #, c-format msgid "Truly minimal install" -msgstr "Ҳақиқий минимал ўрнатиш" +msgstr "Haqiqiy minimal o'rnatish" #: ../help.pm:152 #, c-format @@ -308,11 +309,11 @@ msgid "" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" -"Монитор\n" +"Monitor\n" "\n" -" Одатда, ўрнатувчи компьютерингизга уланган мониторни\n" -"автоматик равишда аниқлайди ва мослайди. Агар бу нотўғри\n" -"бўлса, аслида уланган мониторни рўйхатдан танлашингиз мумкин." +" Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n" +"avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n" +"bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin." #: ../help.pm:234 #, c-format @@ -383,11 +384,11 @@ msgid "" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" -"Монитор\n" +"Monitor\n" "\n" -" Одатда, ўрнатувчи компьютерингизга уланган мониторни\n" -"автоматик равишда аниқлайди ва мослайди. Агар бу нотўғри\n" -"бўлса, аслида уланган мониторни рўйхатдан танлашингиз мумкин." +" Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n" +"avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n" +"bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin." #: ../help.pm:298 #, c-format @@ -488,12 +489,12 @@ msgstr "" #: ../help.pm:377 #, c-format msgid "Use existing partition" -msgstr "Дискда бор қисмлардан фойдаланиш" +msgstr "Diskda bor qismlardan foydalanish" #: ../help.pm:377 #, c-format msgid "Erase entire disk" -msgstr "Бутун дискни ўчириш" +msgstr "Butun diskni o'chirish" #: ../help.pm:380 #, c-format @@ -536,7 +537,7 @@ msgstr "" #: ../help.pm:412 #, c-format msgid "Generate auto-install floppy" -msgstr "Авто-ўрнатиш дискетни яратиш" +msgstr "Avto-o'rnatish disketni yaratish" #: ../help.pm:415 #, c-format @@ -600,7 +601,7 @@ msgstr "" #: ../help.pm:461 #, c-format msgid "Security Administrator" -msgstr "Хавфсизлик бошқарувчиси" +msgstr "Xavfsizlik boshqaruvchisi" #: ../help.pm:464 #, c-format @@ -685,7 +686,7 @@ msgstr "" #: ../help.pm:533 #, c-format msgid "Toggle between normal/expert mode" -msgstr "Одий/эксперт усулига ўтиш" +msgstr "Odiy/ekspert usuliga o'tish" #: ../help.pm:536 #, c-format @@ -872,7 +873,7 @@ msgstr "" #: ../help.pm:684 #, c-format msgid "Universal | Any PS/2 & USB mice" -msgstr "Истаган PS/2 ва USB сичқонча" +msgstr "Istagan PS/2 va USB sichqoncha" #: ../help.pm:687 #, c-format @@ -880,8 +881,8 @@ msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" -"Илтимос тўғри портни танланг. Масалан, Windows'даги \"COM1\"\n" -"портининг номи GNU/Linux'да \"ttyS0\"." +"Iltimos to'g'ri portni tanlang. Masalan, Windows'dagi \"COM1\"\n" +"portining nomi GNU/Linux'da \"ttyS0\"." #: ../help.pm:691 #, c-format @@ -927,7 +928,7 @@ msgstr "" #: ../help.pm:725 #, c-format msgid "authentication" -msgstr "тасдиқлаш" +msgstr "tasdiqlash" #: ../help.pm:728 #, c-format @@ -987,7 +988,7 @@ msgstr "" #: ../help.pm:768 #, c-format msgid "Expert" -msgstr "Эксперт" +msgstr "Ekspert" #: ../help.pm:771 #, c-format @@ -1017,9 +1018,9 @@ msgid "" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" -"\"%s\": агар компьютерда товуш картаси аниқланса у шу ерда кўрсатилади.\n" -"Агар кўрсатилган товуш картаси компьютердаги товуш картаси\n" -"билан мос келмаса, тугмани босиб бошқа драйверни танлашингиз мумкин." +"\"%s\": agar kompyuterda tovush kartasi aniqlansa u shu erda ko'rsatiladi.\n" +"Agar ko'rsatilgan tovush kartasi kompyuterdagi tovush kartasi\n" +"bilan mos kelmasa, tugmani bosib boshqa drayverni tanlashingiz mumkin." #: ../help.pm:794 #, c-format @@ -1100,7 +1101,7 @@ msgstr "ISDN karta" #: ../help.pm:858 #, c-format msgid "Graphical Interface" -msgstr "График интерфейс" +msgstr "Grafik interfeys" #: ../help.pm:861 #, c-format @@ -1121,21 +1122,21 @@ msgid "" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" -"Бу дискдаги барча маълумотни ва дискнинг барча қисмларини\n" -"ўчириш учун \"%s\"ни босинг. Эҳтиёт бўлинг, \"%s\"ни босганингиздан\n" -"кейин дискдаги маълумотни ва дискнинг қисмларини, шу жумлада\n" -"Windows маълумотини ҳам, тиклаб бўлмайди.\n" +"Bu diskdagi barcha ma'lumotni va diskning barcha qismlarini\n" +"o'chirish uchun \"%s\"ni bosing. Ehtiyot bo'ling, \"%s\"ni bosganingizdan\n" +"keyin diskdagi ma'lumotni va diskning qismlarini, shu jumlada\n" +"Windows ma'lumotini ham, tiklab bo'lmaydi.\n" "\n" -"Маълумотни ва дискнинг барча қисмларини йўқотмасдан бу\n" -"операцияни тўхтатиш учун \"%s\"ни босинг." +"Ma'lumotni va diskning barcha qismlarini yo'qotmasdan bu\n" +"operatsiyani to'xtatish uchun \"%s\"ni bosing." #: ../help.pm:872 #, c-format msgid "Next ->" -msgstr "Кейинги ->" +msgstr "Keyingi ->" #: ../help.pm:872 #, c-format msgid "<- Previous" -msgstr "<- Олдинги" +msgstr "<- Oldingi" diff --git a/perl-install/install/help/po/uz@Latn.po b/perl-install/install/help/po/uz@Latn.po deleted file mode 100644 index 6608ada4c..000000000 --- a/perl-install/install/help/po/uz@Latn.po +++ /dev/null @@ -1,1142 +0,0 @@ -# translation of DrakX-uz.po to Uzbek -# Copyright (C) 2003, 2004, 2006 Free Software Foundation, Inc. -# Copyright (C) 2003 Mandriva. -# -# Mashrab Kuvatov , 2003, 2004, 2006. -msgid "" -msgstr "" -"Project-Id-Version: DrakX-uz\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2006-05-04 17:25+0200\n" -"PO-Revision-Date: 2006-04-23 12:29+0200\n" -"Last-Translator: Mashrab Kuvatov \n" -"Language-Team: Uzbek \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 1.11.2\n" - -#: ../help.pm:14 -#, c-format -msgid "" -"Before continuing, you should carefully read the terms of the license. It\n" -"covers the entire Mandriva Linux distribution. If you agree with all the\n" -"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" -"button will reboot your computer." -msgstr "" -"Davom etishdan oldin litsenziyaning shartlarini e'tibor bilan o'qib\n" -"chiqing. Litsenziya butun Mandriva Linux'ga tegishli. Agar uning barcha\n" -"shartlariga rozi bo'lsangiz, \"%s\"ni tanlang. Agar rozi bo'lmasangiz,\n" -"kompyuterni o'chirib-yoqish uchun \"%s\" tugmasini bosing." - -#: ../help.pm:20 -#, c-format -msgid "" -"GNU/Linux is a multi-user system which means each user can have his or her\n" -"own preferences, own files and so on. But unlike \"root\", who is the\n" -"system administrator, the users you add at this point will not be " -"authorized\n" -"to change anything except their own files and their own configurations,\n" -"protecting the system from unintentional or malicious changes which could\n" -"impact on the system as a whole. You'll have to create at least one regular\n" -"user for yourself -- this is the account which you should use for routine,\n" -"day-to-day usage. Although it's very easy to log in as \"root\" to do\n" -"anything and everything, it may also be very dangerous! A very simple\n" -"mistake could mean that your system will not work any more. If you make a\n" -"serious mistake as a regular user, the worst that can happen is that you'll\n" -"lose some information, but you will not affect the entire system.\n" -"\n" -"The first field asks you for a real name. Of course, this is not mandatory\n" -"-- you can actually enter whatever you like. DrakX will use the first word\n" -"you type in this field and copy it to the \"%s\" one, which is the name\n" -"this user will enter to log onto the system. If you like, you may override\n" -"the default and change the user name. The next step is to enter a password.\n" -"From a security point of view, a non-privileged (regular) user password is\n" -"not as crucial as the \"root\" password, but that's no reason to neglect it\n" -"by making it blank or too simple: after all, your files could be the ones\n" -"at risk.\n" -"\n" -"Once you click on \"%s\", you can add other users. Add a user for each one\n" -"of your friends, your father, your sister, etc. Click \"%s\" when you're\n" -"finished adding users.\n" -"\n" -"Clicking the \"%s\" button allows you to change the default \"shell\" for\n" -"that user (bash by default).\n" -"\n" -"When you're finished adding users, you'll be asked to choose a user who\n" -"will be automatically logged into the system when the computer boots up. If\n" -"you're interested in that feature (and do not care much about local\n" -"security), choose the desired user and window manager, then click on\n" -"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." -msgstr "" - -#: ../help.pm:54 -#, c-format -msgid "Do you want to use this feature?" -msgstr "Bu qulaylikdan foydalanishni istaysizmi?" - -#: ../help.pm:57 -#, c-format -msgid "" -"Listed here are the existing Linux partitions detected on your hard drive.\n" -"You can keep the choices made by the wizard, since they are good for most\n" -"common installations. If you make any changes, you must at least define a\n" -"root partition (\"/\"). Do not choose too small a partition or you will not\n" -"be able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a \"/home\" partition\n" -"(only possible if you have more than one Linux partition available).\n" -"\n" -"Each partition is listed as follows: \"Name\", \"Capacity\".\n" -"\n" -"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc." -msgstr "" - -#: ../help.pm:88 -#, c-format -msgid "" -"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n" -"selected package is located on another CD-ROM, DrakX will eject the current\n" -"CD and ask you to insert the required one. If you do not have the requested\n" -"CD at hand, just click on \"%s\", the corresponding packages will not be\n" -"installed." -msgstr "" -"Mandriva Linux bir nechta kompakt-disklarda tarqatiladi. Agar tanlangan " -"paket\n" -"boshqa kompakt-diskda joylashgan bo'lsa, DrakX joriy kompakt-diskni\n" -"chiqaradi va tegishlisini qo'yishni so'raydi. Agar so'ralgan kompakt-disk " -"sizda\n" -"bo'lmasa, \"%s\" tugmasini bosing. Bu holda, tegishli paketlar o'rnatilmaydi." - -#: ../help.pm:95 -#, c-format -msgid "" -"It's now time to specify which programs you wish to install on your system.\n" -"There are thousands of packages available for Mandriva Linux, and to make " -"it\n" -"simpler to manage, they have been placed into groups of similar\n" -"applications.\n" -"\n" -"Mandriva Linux sorts package groups in four categories. You can mix and\n" -"match applications from the various categories, so a ``Workstation''\n" -"installation can still have applications from the ``Server'' category\n" -"installed.\n" -"\n" -" * \"%s\": if you plan to use your machine as a workstation, select one or\n" -"more of the groups in the workstation category.\n" -"\n" -" * \"%s\": if you plan on using your machine for programming, select the\n" -"appropriate groups from that category. The special \"LSB\" group will\n" -"configure your system so that it complies as much as possible with the\n" -"Linux Standard Base specifications.\n" -"\n" -" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" -"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" -"of the system. However, if you do not select the \"LSB\" group you will\n" -"still have a system which is nearly 100%% LSB-compliant.\n" -"\n" -" * \"%s\": if your machine is intended to be a server, select which of the\n" -"more common services you wish to install on your machine.\n" -"\n" -" * \"%s\": this is where you will choose your preferred graphical\n" -"environment. At least one must be selected if you want to have a graphical\n" -"interface available.\n" -"\n" -"Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group.\n" -"\n" -"You can check the \"%s\" box, which is useful if you're familiar with the\n" -"packages being offered or if you want to have total control over what will\n" -"be installed.\n" -"\n" -"If you start the installation in \"%s\" mode, you can deselect all groups\n" -"and prevent the installation of any new packages. This is useful for\n" -"repairing or updating an existing system.\n" -"\n" -"If you deselect all groups when performing a regular installation (as\n" -"opposed to an upgrade), a dialog will pop up suggesting different options\n" -"for a minimal installation:\n" -"\n" -" * \"%s\": install the minimum number of packages possible to have a\n" -"working graphical desktop.\n" -"\n" -" * \"%s\": installs the base system plus basic utilities and their\n" -"documentation. This installation is suitable for setting up a server.\n" -"\n" -" * \"%s\": will install the absolute minimum number of packages necessary\n" -"to get a working Linux system. With this installation you will only have a\n" -"command-line interface. The total size of this installation is about 65\n" -"megabytes." -msgstr "" - -#: ../help.pm:149 ../help.pm:591 -#, c-format -msgid "Upgrade" -msgstr "Yangilash" - -#: ../help.pm:149 -#, c-format -msgid "With basic documentation" -msgstr "Asosiy qo'llanmalar bilan" - -#: ../help.pm:149 -#, c-format -msgid "Truly minimal install" -msgstr "Haqiqiy minimal o'rnatish" - -#: ../help.pm:152 -#, c-format -msgid "" -"If you choose to install packages individually, the installer will present\n" -"a tree containing all packages classified by groups and subgroups. While\n" -"browsing the tree, you can select entire groups, subgroups, or individual\n" -"packages.\n" -"\n" -"Whenever you select a package on the tree, a description will appear on the\n" -"right to let you know the purpose of that package.\n" -"\n" -"!! If a server package has been selected, either because you specifically\n" -"chose the individual package or because it was part of a group of packages,\n" -"you'll be asked to confirm that you really want those servers to be\n" -"installed. By default Mandriva Linux will automatically start any installed\n" -"services at boot time. Even if they are safe and have no known issues at\n" -"the time the distribution was shipped, it is entirely possible that\n" -"security holes were discovered after this version of Mandriva Linux was\n" -"finalized. If you do not know what a particular service is supposed to do " -"or\n" -"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" -"the listed services and they will be started automatically at boot time. !!\n" -"\n" -"The \"%s\" option is used to disable the warning dialog which appears\n" -"whenever the installer automatically selects a package to resolve a\n" -"dependency issue. Some packages depend on others and the installation of\n" -"one particular package may require the installation of another package. The\n" -"installer can determine which packages are required to satisfy a dependency\n" -"to successfully complete the installation.\n" -"\n" -"The tiny floppy disk icon at the bottom of the list allows you to load a\n" -"package list created during a previous installation. This is useful if you\n" -"have a number of machines that you wish to configure identically. Clicking\n" -"on this icon will ask you to insert the floppy disk created at the end of\n" -"another installation. See the second tip of the last step on how to create\n" -"such a floppy." -msgstr "" - -#: ../help.pm:183 -#, c-format -msgid "Automatic dependencies" -msgstr "" - -#: ../help.pm:186 -#, c-format -msgid "" -"\"%s\": clicking on the \"%s\" button will open the printer configuration\n" -"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" -"information on how to set up a new printer. The interface presented in our\n" -"manual is similar to the one used during installation." -msgstr "" - -#: ../help.pm:192 -#, c-format -msgid "" -"This dialog is used to select which services you wish to start at boot\n" -"time.\n" -"\n" -"DrakX will list all services available on the current installation. Review\n" -"each one of them carefully and uncheck those which are not needed at boot\n" -"time.\n" -"\n" -"A short explanatory text will be displayed about a service when it is\n" -"selected. However, if you're not sure whether a service is useful or not,\n" -"it is safer to leave the default behavior.\n" -"\n" -"!! At this stage, be very careful if you intend to use your machine as a\n" -"server: you probably do not want to start any services which you do not " -"need.\n" -"Please remember that some services can be dangerous if they're enabled on a\n" -"server. In general, select only those services you really need. !!" -msgstr "" - -#: ../help.pm:209 -#, c-format -msgid "" -"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" -"local time according to the time zone you selected. If the clock on your\n" -"motherboard is set to local time, you may deactivate this by unselecting\n" -"\"%s\", which will let GNU/Linux know that the system clock and the\n" -"hardware clock are in the same time zone. This is useful when the machine\n" -"also hosts another operating system.\n" -"\n" -"The \"%s\" option will automatically regulate the system clock by\n" -"connecting to a remote time server on the Internet. For this feature to\n" -"work, you must have a working Internet connection. We recommend that you\n" -"choose a time server located near you. This option actually installs a time\n" -"server which can be used by other machines on your local network as well." -msgstr "" - -#: ../help.pm:220 -#, c-format -msgid "Automatic time synchronization" -msgstr "" - -#: ../help.pm:223 -#, fuzzy, c-format -msgid "" -"Graphic Card\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"graphic card installed on your machine. If this is not correct, you can\n" -"choose from this list the card you actually have installed.\n" -"\n" -" In the situation where different servers are available for your card,\n" -"with or without 3D acceleration, you're asked to choose the server which\n" -"best suits your needs." -msgstr "" -"Monitor\n" -"\n" -" Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n" -"avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n" -"bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin." - -#: ../help.pm:234 -#, c-format -msgid "" -"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" -"on which all the graphical environments (KDE, GNOME, AfterStep,\n" -"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n" -"\n" -"You'll see a list of different parameters to change to get an optimal\n" -"graphical display.\n" -"\n" -"Graphic Card\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"graphic card installed on your machine. If this is not correct, you can\n" -"choose from this list the card you actually have installed.\n" -"\n" -" In the situation where different servers are available for your card,\n" -"with or without 3D acceleration, you're asked to choose the server which\n" -"best suits your needs.\n" -"\n" -"\n" -"\n" -"Monitor\n" -"\n" -" Normally the installer will automatically detect and configure the\n" -"monitor connected to your machine. If it is not correct, you can choose\n" -"from this list the monitor which is connected to your computer.\n" -"\n" -"\n" -"\n" -"Resolution\n" -"\n" -" Here you can choose the resolutions and color depths available for your\n" -"graphics hardware. Choose the one which best suits your needs (you will be\n" -"able to make changes after the installation). A sample of the chosen\n" -"configuration is shown in the monitor picture.\n" -"\n" -"\n" -"\n" -"Test\n" -"\n" -" Depending on your hardware, this entry might not appear.\n" -"\n" -" The system will try to open a graphical screen at the desired\n" -"resolution. If you see the test message during the test and answer \"%s\",\n" -"then DrakX will proceed to the next step. If you do not see it, then it\n" -"means that some part of the auto-detected configuration was incorrect and\n" -"the test will automatically end after 12 seconds and return you to the\n" -"menu. Change settings until you get a correct graphical display.\n" -"\n" -"\n" -"\n" -"Options\n" -"\n" -" This steps allows you to choose whether you want your machine to\n" -"automatically switch to a graphical interface at boot. Obviously, you may\n" -"want to check \"%s\" if your machine is to act as a server, or if you were\n" -"not successful in getting the display configured." -msgstr "" - -#: ../help.pm:291 -#, c-format -msgid "" -"Monitor\n" -"\n" -" Normally the installer will automatically detect and configure the\n" -"monitor connected to your machine. If it is not correct, you can choose\n" -"from this list the monitor which is connected to your computer." -msgstr "" -"Monitor\n" -"\n" -" Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n" -"avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n" -"bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin." - -#: ../help.pm:298 -#, c-format -msgid "" -"Resolution\n" -"\n" -" Here you can choose the resolutions and color depths available for your\n" -"graphics hardware. Choose the one which best suits your needs (you will be\n" -"able to make changes after the installation). A sample of the chosen\n" -"configuration is shown in the monitor picture." -msgstr "" - -#: ../help.pm:306 -#, c-format -msgid "" -"In the situation where different servers are available for your card, with\n" -"or without 3D acceleration, you're asked to choose the server which best\n" -"suits your needs." -msgstr "" - -#: ../help.pm:311 -#, c-format -msgid "" -"Options\n" -"\n" -" This steps allows you to choose whether you want your machine to\n" -"automatically switch to a graphical interface at boot. Obviously, you may\n" -"want to check \"%s\" if your machine is to act as a server, or if you were\n" -"not successful in getting the display configured." -msgstr "" - -#: ../help.pm:319 -#, c-format -msgid "" -"You now need to decide where you want to install the Mandriva Linux\n" -"operating system on your hard drive. If your hard drive is empty or if an\n" -"existing operating system is using all the available space you will have to\n" -"partition the drive. Basically, partitioning a hard drive means to\n" -"logically divide it to create the space needed to install your new\n" -"Mandriva Linux system.\n" -"\n" -"Because the process of partitioning a hard drive is usually irreversible\n" -"and can lead to data losses, partitioning can be intimidating and stressful\n" -"for the inexperienced user. Fortunately, DrakX includes a wizard which\n" -"simplifies this process. Before continuing with this step, read through the\n" -"rest of this section and above all, take your time.\n" -"\n" -"Depending on the configuration of your hard drive, several options are\n" -"available:\n" -"\n" -" * \"%s\". This option will perform an automatic partitioning of your blank\n" -"drive(s). If you use this option there will be no further prompts.\n" -"\n" -" * \"%s\". The wizard has detected one or more existing Linux partitions on\n" -"your hard drive. If you want to use them, choose this option. You will then\n" -"be asked to choose the mount points associated with each of the partitions.\n" -"The legacy mount points are selected by default, and for the most part it's\n" -"a good idea to keep them.\n" -"\n" -" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" -"all the space available on it, you will have to create free space for\n" -"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" -"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" -"FAT or NTFS partition. Resizing can be performed without the loss of any\n" -"data, provided you've previously defragmented the Windows partition.\n" -"Backing up your data is strongly recommended. Using this option is\n" -"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n" -"the same computer.\n" -"\n" -" Before choosing this option, please understand that after this\n" -"procedure, the size of your Microsoft Windows partition will be smaller\n" -"than when you started. You'll have less free space under Microsoft Windows\n" -"to store your data or to install new software.\n" -"\n" -" * \"%s\". If you want to delete all data and all partitions present on\n" -"your hard drive and replace them with your new Mandriva Linux system, " -"choose\n" -"this option. Be careful, because you will not be able to undo this " -"operation\n" -"after you confirm.\n" -"\n" -" !! If you choose this option, all data on your disk will be deleted. !!\n" -"\n" -" * \"%s\". This option appears when the hard drive is entirely taken by\n" -"Microsoft Windows. Choosing this option will simply erase everything on the\n" -"drive and begin fresh, partitioning everything from scratch.\n" -"\n" -" !! If you choose this option, all data on your disk will be lost. !!\n" -"\n" -" * \"%s\". Choose this option if you want to manually partition your hard\n" -"drive. Be careful -- it is a powerful but dangerous choice and you can very\n" -"easily lose all your data. That's why this option is really only\n" -"recommended if you have done something like this before and have some\n" -"experience. For more instructions on how to use the DiskDrake utility,\n" -"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." -msgstr "" - -#: ../help.pm:377 -#, c-format -msgid "Use existing partition" -msgstr "Diskda bor qismlardan foydalanish" - -#: ../help.pm:377 -#, c-format -msgid "Erase entire disk" -msgstr "Butun diskni o'chirish" - -#: ../help.pm:380 -#, c-format -msgid "" -"There you are. Installation is now complete and your GNU/Linux system is\n" -"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" -"to remove the installation media (CD-ROM or floppy). The first thing you\n" -"should see after your computer has finished doing its hardware tests is the\n" -"boot-loader menu, giving you the choice of which operating system to start.\n" -"\n" -"The \"%s\" button shows two more buttons to:\n" -"\n" -" * \"%s\": enables you to create an installation floppy disk which will\n" -"automatically perform a whole installation without the help of an operator,\n" -"similar to the installation you've just configured.\n" -"\n" -" Note that two different options are available after clicking on that\n" -"button:\n" -"\n" -" * \"%s\". This is a partially automated installation. The partitioning\n" -"step is the only interactive procedure.\n" -"\n" -" * \"%s\". Fully automated installation: the hard disk is completely\n" -"rewritten, all data is lost.\n" -"\n" -" This feature is very handy when installing on a number of similar\n" -"machines. See the Auto install section on our web site for more\n" -"information.\n" -"\n" -" * \"%s\"(*): saves a list of the packages selected in this installation.\n" -"To use this selection with another installation, insert the floppy and\n" -"start the installation. At the prompt, press the [F1] key, type >>linux\n" -"defcfg=\"floppy\"<< and press the [Enter] key.\n" -"\n" -"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" -"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" -"/dev/fd0\"." -msgstr "" - -#: ../help.pm:412 -#, c-format -msgid "Generate auto-install floppy" -msgstr "Avto-o'rnatish disketni yaratish" - -#: ../help.pm:415 -#, c-format -msgid "" -"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" -"reformat some of them and erase any data they contain. To do so, please\n" -"select those partitions as well.\n" -"\n" -"Please note that it's not necessary to reformat all pre-existing\n" -"partitions. You must reformat the partitions containing the operating\n" -"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " -"reformat\n" -"partitions containing data that you wish to keep (typically \"/home\").\n" -"\n" -"Please be careful when selecting partitions. After the formatting is\n" -"completed, all data on the selected partitions will be deleted and you\n" -"will not be able to recover it.\n" -"\n" -"Click on \"%s\" when you're ready to format the partitions.\n" -"\n" -"Click on \"%s\" if you want to choose another partition for your new\n" -"Mandriva Linux operating system installation.\n" -"\n" -"Click on \"%s\" if you wish to select partitions which will be checked for\n" -"bad blocks on the disk." -msgstr "" - -#: ../help.pm:437 -#, c-format -msgid "" -"By the time you install Mandriva Linux, it's likely that some packages will\n" -"have been updated since the initial release. Bugs may have been fixed,\n" -"security issues resolved. To allow you to benefit from these updates,\n" -"you're now able to download them from the Internet. Check \"%s\" if you\n" -"have a working Internet connection, or \"%s\" if you prefer to install\n" -"updated packages later.\n" -"\n" -"Choosing \"%s\" will display a list of web locations from which updates can\n" -"be retrieved. You should choose one near to you. A package-selection tree\n" -"will appear: review the selection, and press \"%s\" to retrieve and install\n" -"the selected package(s), or \"%s\" to abort." -msgstr "" - -#: ../help.pm:450 -#, c-format -msgid "" -"At this point, DrakX will allow you to choose the security level you desire\n" -"for your machine. As a rule of thumb, the security level should be set\n" -"higher if the machine is to contain crucial data, or if it's to be directly\n" -"exposed to the Internet. The trade-off that a higher security level is\n" -"generally obtained at the expense of ease of use.\n" -"\n" -"If you do not know what to choose, keep the default option. You'll be able\n" -"to change it later with the draksec tool, which is part of Mandriva Linux\n" -"Control Center.\n" -"\n" -"Fill the \"%s\" field with the e-mail address of the person responsible for\n" -"security. Security messages will be sent to that address." -msgstr "" - -#: ../help.pm:461 -#, c-format -msgid "Security Administrator" -msgstr "Xavfsizlik boshqaruvchisi" - -#: ../help.pm:464 -#, c-format -msgid "" -"At this point, you need to choose which partition(s) will be used for the\n" -"installation of your Mandriva Linux system. If partitions have already been\n" -"defined, either from a previous installation of GNU/Linux or by another\n" -"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" -"partitions must be defined.\n" -"\n" -"To create partitions, you must first select a hard drive. You can select\n" -"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" -"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" -"\n" -"To partition the selected hard drive, you can use these options:\n" -"\n" -" * \"%s\": this option deletes all partitions on the selected hard drive\n" -"\n" -" * \"%s\": this option enables you to automatically create ext3 and swap\n" -"partitions in the free space of your hard drive\n" -"\n" -"\"%s\": gives access to additional features:\n" -"\n" -" * \"%s\": saves the partition table to a floppy. Useful for later\n" -"partition-table recovery if necessary. It is strongly recommended that you\n" -"perform this step.\n" -"\n" -" * \"%s\": allows you to restore a previously saved partition table from a\n" -"floppy disk.\n" -"\n" -" * \"%s\": if your partition table is damaged, you can try to recover it\n" -"using this option. Please be careful and remember that it does not always\n" -"work.\n" -"\n" -" * \"%s\": discards all changes and reloads the partition table that was\n" -"originally on the hard drive.\n" -"\n" -" * \"%s\": un-checking this option will force users to manually mount and\n" -"unmount removable media such as floppies and CD-ROMs.\n" -"\n" -" * \"%s\": use this option if you wish to use a wizard to partition your\n" -"hard drive. This is recommended if you do not have a good understanding of\n" -"partitioning.\n" -"\n" -" * \"%s\": use this option to cancel your changes.\n" -"\n" -" * \"%s\": allows additional actions on partitions (type, options, format)\n" -"and gives more information about the hard drive.\n" -"\n" -" * \"%s\": when you are finished partitioning your hard drive, this will\n" -"save your changes back to disk.\n" -"\n" -"When defining the size of a partition, you can finely set the partition\n" -"size by using the Arrow keys of your keyboard.\n" -"\n" -"Note: you can reach any option using the keyboard. Navigate through the\n" -"partitions using [Tab] and the [Up/Down] arrows.\n" -"\n" -"When a partition is selected, you can use:\n" -"\n" -" * Ctrl-c to create a new partition (when an empty partition is selected)\n" -"\n" -" * Ctrl-d to delete a partition\n" -"\n" -" * Ctrl-m to set the mount point\n" -"\n" -"To get information about the different file system types available, please\n" -"read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." -msgstr "" - -#: ../help.pm:533 -#, c-format -msgid "Removable media auto-mounting" -msgstr "" - -#: ../help.pm:533 -#, c-format -msgid "Toggle between normal/expert mode" -msgstr "Odiy/ekspert usuliga o'tish" - -#: ../help.pm:536 -#, c-format -msgid "" -"More than one Microsoft partition has been detected on your hard drive.\n" -"Please choose the one which you want to resize in order to install your new\n" -"Mandriva Linux operating system.\n" -"\n" -"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" -"\"Capacity\".\n" -"\n" -"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc.\n" -"\n" -"\"Windows name\" is the letter of your hard drive under Windows (the first\n" -"disk or partition is called \"C:\")." -msgstr "" - -#: ../help.pm:567 -#, c-format -msgid "" -"\"%s\": check the current country selection. If you're not in this country,\n" -"click on the \"%s\" button and choose another. If your country is not in " -"the\n" -"list shown, click on the \"%s\" button to get the complete country list." -msgstr "" - -#: ../help.pm:572 -#, c-format -msgid "" -"This step is activated only if an existing GNU/Linux partition has been\n" -"found on your machine.\n" -"\n" -"DrakX now needs to know if you want to perform a new installation or an\n" -"upgrade of an existing Mandriva Linux system:\n" -"\n" -" * \"%s\". For the most part, this completely wipes out the old system.\n" -"However, depending on your partitioning scheme, you can prevent some of\n" -"your existing data (notably \"home\" directories) from being over-written.\n" -"If you wish to change how your hard drives are partitioned, or to change\n" -"the file system, you should use this option.\n" -"\n" -" * \"%s\". This installation class allows you to update the packages\n" -"currently installed on your Mandriva Linux system. Your current " -"partitioning\n" -"scheme and user data will not be altered. Most of the other configuration\n" -"steps remain available and are similar to a standard installation.\n" -"\n" -"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n" -"running version \"8.1\" or later. Performing an upgrade on versions prior\n" -"to Mandriva Linux version \"8.1\" is not recommended." -msgstr "" - -#: ../help.pm:594 -#, c-format -msgid "" -"Depending on the language you chose (), DrakX will automatically select a\n" -"particular type of keyboard configuration. Check that the selection suits\n" -"you or choose another keyboard layout.\n" -"\n" -"Also, you may not have a keyboard which corresponds exactly to your\n" -"language: for example, if you are an English-speaking Swiss native, you may\n" -"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" -"you may find yourself in the same situation where your native language and\n" -"country-set keyboard do not match. In either case, this installation step\n" -"will allow you to select an appropriate keyboard from a list.\n" -"\n" -"Click on the \"%s\" button to be shown a list of supported keyboards.\n" -"\n" -"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" -"dialog will allow you to choose the key binding which will switch the\n" -"keyboard between the Latin and non-Latin layouts." -msgstr "" - -#: ../help.pm:612 -#, c-format -msgid "" -"The first step is to choose your preferred language.\n" -"\n" -"Your choice of preferred language will affect the installer, the\n" -"documentation, and the system in general. First select the region you're\n" -"located in, then the language you speak.\n" -"\n" -"Clicking on the \"%s\" button will allow you to select other languages to\n" -"be installed on your workstation, thereby installing the language-specific\n" -"files for system documentation and applications. For example, if Spanish\n" -"users are to use your machine, select English as the default language in\n" -"the tree view and \"%s\" in the Advanced section.\n" -"\n" -"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" -"cover all existing languages. However full support for it in GNU/Linux is\n" -"still under development. For that reason, Mandriva Linux's use of UTF-8 " -"will\n" -"depend on the user's choices:\n" -"\n" -" * If you choose a language with a strong legacy encoding (latin1\n" -"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" -"iso-8859-2 languages), the legacy encoding will be used by default;\n" -"\n" -" * Other languages will use unicode by default;\n" -"\n" -" * If two or more languages are required, and those languages are not using\n" -"the same encoding, then unicode will be used for the whole system;\n" -"\n" -" * Finally, unicode can also be forced for use throughout the system at a\n" -"user's request by selecting the \"%s\" option independently of which\n" -"languages were been chosen.\n" -"\n" -"Note that you're not limited to choosing a single additional language. You\n" -"may choose several, or even install them all by selecting the \"%s\" box.\n" -"Selecting support for a language means translations, fonts, spell checkers,\n" -"etc. will also be installed for that language.\n" -"\n" -"To switch between the various languages installed on your system, you can\n" -"launch the \"localedrake\" command as \"root\" to change the language used\n" -"by the entire system. Running the command as a regular user will only\n" -"change the language settings for that particular user." -msgstr "" - -#: ../help.pm:650 -#, c-format -msgid "Espanol" -msgstr "" - -#: ../help.pm:653 -#, c-format -msgid "" -"Usually, DrakX has no problems detecting the number of buttons on your\n" -"mouse. If it does, it assumes you have a two-button mouse and will\n" -"configure it for third-button emulation. The third-button mouse button of a\n" -"two-button mouse can be obtained by simultaneously clicking the left and\n" -"right mouse buttons. DrakX will automatically know whether your mouse uses\n" -"a PS/2, serial or USB interface.\n" -"\n" -"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" -"mouse. DrakX will then configure your mouse so that you can simulate the\n" -"wheel with it: to do so, press the middle button and move your mouse\n" -"pointer up and down.\n" -"\n" -"If for some reason you wish to specify a different type of mouse, select it\n" -"from the list provided.\n" -"\n" -"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" -"will work with nearly all mice.\n" -"\n" -"If you choose a mouse other than the default one, a test screen will be\n" -"displayed. Use the buttons and wheel to verify that the settings are\n" -"correct and that the mouse is working correctly. If the mouse is not\n" -"working well, press the space bar or [Return] key to cancel the test and\n" -"you will be returned to the mouse list.\n" -"\n" -"Occasionally wheel mice are not detected automatically, so you will need to\n" -"select your mouse from a list. Be sure to select the one corresponding to\n" -"the port that your mouse is attached to. After selecting a mouse and\n" -"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" -"Scroll the mouse wheel to ensure that it is activating correctly. As you\n" -"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" -"Test the buttons and check that the mouse pointer moves on-screen as you\n" -"move your mouse about." -msgstr "" - -#: ../help.pm:684 -#, c-format -msgid "with Wheel emulation" -msgstr "" - -#: ../help.pm:684 -#, c-format -msgid "Universal | Any PS/2 & USB mice" -msgstr "Istagan PS/2 va USB sichqoncha" - -#: ../help.pm:687 -#, c-format -msgid "" -"Please select the correct port. For example, the \"COM1\" port under\n" -"Windows is named \"ttyS0\" under GNU/Linux." -msgstr "" -"Iltimos to'g'ri portni tanlang. Masalan, Windows'dagi \"COM1\"\n" -"portining nomi GNU/Linux'da \"ttyS0\"." - -#: ../help.pm:691 -#, c-format -msgid "" -"This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you must enter the \"root\" password. \"Root\" is the system\n" -"administrator and is the only user authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, \"root\" can\n" -"do everything! That's why you must choose a password which is difficult to\n" -"guess: DrakX will tell you if the password you chose is too simple. As you\n" -"can see, you're not forced to enter a password, but we strongly advise\n" -"against this. GNU/Linux is just as prone to operator error as any other\n" -"operating system. Since \"root\" can overcome all limitations and\n" -"unintentionally erase all data on partitions by carelessly accessing the\n" -"partitions themselves, it is important that it be difficult to become\n" -"\"root\".\n" -"\n" -"The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the \"root\" password -- it makes it far\n" -"too easy to compromise your system.\n" -"\n" -"One caveat: do not make the password too long or too complicated because " -"you\n" -"must be able to remember it!\n" -"\n" -"The password will not be displayed on screen as you type it. To reduce the\n" -"chance of a blind typing error you'll need to enter the password twice. If\n" -"you do happen to make the same typing error twice, you'll have to use this\n" -"``incorrect'' password the first time you'll try to connect as \"root\".\n" -"\n" -"If you want an authentication server to control access to your computer,\n" -"click on the \"%s\" button.\n" -"\n" -"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" -"services, select the appropriate one for \"%s\". If you do not know which\n" -"one to use, you should ask your network administrator.\n" -"\n" -"If you happen to have problems with remembering passwords, or if your\n" -"computer will never be connected to the Internet and you absolutely trust\n" -"everybody who uses your computer, you can choose to have \"%s\"." -msgstr "" - -#: ../help.pm:725 -#, c-format -msgid "authentication" -msgstr "tasdiqlash" - -#: ../help.pm:728 -#, c-format -msgid "" -"A boot loader is a little program which is started by the computer at boot\n" -"time. It's responsible for starting up the whole system. Normally, the boot\n" -"loader installation is totally automated. DrakX will analyze the disk boot\n" -"sector and act according to what it finds there:\n" -"\n" -" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" -"boot sector. This way you'll be able to load either GNU/Linux or any other\n" -"OS installed on your machine.\n" -"\n" -" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" -"\n" -"If DrakX can not determine where to place the boot sector, it'll ask you\n" -"where it should place it. Generally, the \"%s\" is the safest place.\n" -"Choosing \"%s\" will not install any boot loader. Use this option only if " -"you\n" -"know what you're doing." -msgstr "" - -#: ../help.pm:745 -#, c-format -msgid "" -"Now, it's time to select a printing system for your computer. Other\n" -"operating systems may offer you one, but Mandriva Linux offers two. Each of\n" -"the printing systems is best suited to particular types of configuration.\n" -"\n" -" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" -"if you have a direct connection to your printer, you want to be able to\n" -"panic out of printer jams, and you do not have networked printers. (\"%s\"\n" -"will handle only very simple network cases and is somewhat slow when used\n" -"within networks.) It's recommended that you use \"pdq\" if this is your\n" -"first experience with GNU/Linux.\n" -"\n" -" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" -"choice for printing to your local printer or to one halfway around the\n" -"planet. It's simple to configure and can act as a server or a client for\n" -"the ancient \"lpd\" printing system, so it's compatible with older\n" -"operating systems which may still need print services. While quite\n" -"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" -"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" -"\"%s\" includes graphical front-ends for printing or choosing printer\n" -"options and for managing the printer.\n" -"\n" -"If you make a choice now, and later find that you do not like your printing\n" -"system you may change it by running PrinterDrake from the Mandriva Linux\n" -"Control Center and clicking on the \"%s\" button." -msgstr "" - -#: ../help.pm:768 -#, c-format -msgid "pdq" -msgstr "" - -#: ../help.pm:768 -#, c-format -msgid "Expert" -msgstr "Ekspert" - -#: ../help.pm:771 -#, c-format -msgid "" -"DrakX will first detect any IDE devices present in your computer. It will\n" -"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" -"found, DrakX will automatically install the appropriate driver.\n" -"\n" -"Because hardware detection is not foolproof, DrakX may fail in detecting\n" -"your hard drives. If so, you'll have to specify your hardware by hand.\n" -"\n" -"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" -"want to configure options for it. You should allow DrakX to probe the\n" -"hardware for the card-specific options which are needed to initialize the\n" -"adapter. Most of the time, DrakX will get through this step without any\n" -"issues.\n" -"\n" -"If DrakX is not able to probe for the options to automatically determine\n" -"which parameters need to be passed to the hardware, you'll need to manually\n" -"configure the driver." -msgstr "" - -#: ../help.pm:789 -#, c-format -msgid "" -"\"%s\": if a sound card is detected on your system, it'll be displayed\n" -"here. If you notice the sound card is not the one actually present on your\n" -"system, you can click on the button and choose a different driver." -msgstr "" -"\"%s\": agar kompyuterda tovush kartasi aniqlansa u shu erda ko'rsatiladi.\n" -"Agar ko'rsatilgan tovush kartasi kompyuterdagi tovush kartasi\n" -"bilan mos kelmasa, tugmani bosib boshqa drayverni tanlashingiz mumkin." - -#: ../help.pm:794 -#, c-format -msgid "" -"As a review, DrakX will present a summary of information it has gathered\n" -"about your system. Depending on the hardware installed on your machine, you\n" -"may have some or all of the following entries. Each entry is made up of the\n" -"hardware item to be configured, followed by a quick summary of the current\n" -"configuration. Click on the corresponding \"%s\" button to make the change.\n" -"\n" -" * \"%s\": check the current keyboard map configuration and change it if\n" -"necessary.\n" -"\n" -" * \"%s\": check the current country selection. If you're not in this\n" -"country, click on the \"%s\" button and choose another. If your country\n" -"is not in the list shown, click on the \"%s\" button to get the complete\n" -"country list.\n" -"\n" -" * \"%s\": by default, DrakX deduces your time zone based on the country\n" -"you have chosen. You can click on the \"%s\" button here if this is not\n" -"correct.\n" -"\n" -" * \"%s\": verify the current mouse configuration and click on the button\n" -"to change it if necessary.\n" -"\n" -" * \"%s\": clicking on the \"%s\" button will open the printer\n" -"configuration wizard. Consult the corresponding chapter of the ``Starter\n" -"Guide'' for more information on how to set up a new printer. The interface\n" -"presented in our manual is similar to the one used during installation.\n" -"\n" -" * \"%s\": if a sound card is detected on your system, it'll be displayed\n" -"here. If you notice the sound card is not the one actually present on your\n" -"system, you can click on the button and choose a different driver.\n" -"\n" -" * \"%s\": if you have a TV card, this is where information about its\n" -"configuration will be displayed. If you have a TV card and it is not\n" -"detected, click on \"%s\" to try to configure it manually.\n" -"\n" -" * \"%s\": you can click on \"%s\" to change the parameters associated with\n" -"the card if you feel the configuration is wrong.\n" -"\n" -" * \"%s\": by default, DrakX configures your graphical interface in\n" -"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" -"\"%s\" to reconfigure your graphical interface.\n" -"\n" -" * \"%s\": if you wish to configure your Internet or local network access,\n" -"you can do so now. Refer to the printed documentation or use the\n" -"Mandriva Linux Control Center after the installation has finished to " -"benefit\n" -"from full in-line help.\n" -"\n" -" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" -"you're installing on is to be located behind a proxy server.\n" -"\n" -" * \"%s\": this entry allows you to redefine the security level as set in a\n" -"previous step ().\n" -"\n" -" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" -"idea to protect yourself from intrusions by setting up a firewall. Consult\n" -"the corresponding section of the ``Starter Guide'' for details about\n" -"firewall settings.\n" -"\n" -" * \"%s\": if you wish to change your bootloader configuration, click this\n" -"button. This should be reserved to advanced users. Refer to the printed\n" -"documentation or the in-line help about bootloader configuration in the\n" -"Mandriva Linux Control Center.\n" -"\n" -" * \"%s\": through this entry you can fine tune which services will be run\n" -"on your machine. If you plan to use this machine as a server it's a good\n" -"idea to review this setup." -msgstr "" - -#: ../help.pm:858 -#, c-format -msgid "ISDN card" -msgstr "ISDN karta" - -#: ../help.pm:858 -#, c-format -msgid "Graphical Interface" -msgstr "Grafik interfeys" - -#: ../help.pm:861 -#, c-format -msgid "" -"Choose the hard drive you want to erase in order to install your new\n" -"Mandriva Linux partition. Be careful, all data on this drive will be lost\n" -"and will not be recoverable!" -msgstr "" - -#: ../help.pm:866 -#, c-format -msgid "" -"Click on \"%s\" if you want to delete all data and partitions present on\n" -"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" -"to recover any data and partitions present on this hard drive, including\n" -"any Windows data.\n" -"\n" -"Click on \"%s\" to quit this operation without losing data and partitions\n" -"present on this hard drive." -msgstr "" -"Bu diskdagi barcha ma'lumotni va diskning barcha qismlarini\n" -"o'chirish uchun \"%s\"ni bosing. Ehtiyot bo'ling, \"%s\"ni bosganingizdan\n" -"keyin diskdagi ma'lumotni va diskning qismlarini, shu jumlada\n" -"Windows ma'lumotini ham, tiklab bo'lmaydi.\n" -"\n" -"Ma'lumotni va diskning barcha qismlarini yo'qotmasdan bu\n" -"operatsiyani to'xtatish uchun \"%s\"ni bosing." - -#: ../help.pm:872 -#, c-format -msgid "Next ->" -msgstr "Keyingi ->" - -#: ../help.pm:872 -#, c-format -msgid "<- Previous" -msgstr "<- Oldingi" - diff --git a/perl-install/install/help/po/uz@cyrillic.po b/perl-install/install/help/po/uz@cyrillic.po new file mode 100644 index 000000000..f11696d44 --- /dev/null +++ b/perl-install/install/help/po/uz@cyrillic.po @@ -0,0 +1,1141 @@ +# translation of DrakX-uz.po to Uzbek +# Copyright (C) 2003, 2004, 2006 Free Software Foundation, Inc. +# Copyright (C) 2003 Mandriva. +# +# Mashrab Kuvatov , 2003, 2004, 2006. +msgid "" +msgstr "" +"Project-Id-Version: DrakX-uz\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2006-05-04 17:25+0200\n" +"PO-Revision-Date: 2006-04-23 12:29+0200\n" +"Last-Translator: Mashrab Kuvatov \n" +"Language-Team: Uzbek \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.2\n" + +#: ../help.pm:14 +#, c-format +msgid "" +"Before continuing, you should carefully read the terms of the license. It\n" +"covers the entire Mandriva Linux distribution. If you agree with all the\n" +"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" +"button will reboot your computer." +msgstr "" +"Давом этишдан олдин лицензиянинг шартларини эътибор билан ўқиб\n" +"чиқинг. Лицензия бутун Mandriva Linux'га тегишли. Агар унинг барча\n" +"шартларига рози бўлсангиз, \"%s\"ни танланг. Агар рози бўлмасангиз,\n" +"компьютерни ўчириб-ёқиш учун \"%s\" тугмасини босинг." + +#: ../help.pm:20 +#, c-format +msgid "" +"GNU/Linux is a multi-user system which means each user can have his or her\n" +"own preferences, own files and so on. But unlike \"root\", who is the\n" +"system administrator, the users you add at this point will not be " +"authorized\n" +"to change anything except their own files and their own configurations,\n" +"protecting the system from unintentional or malicious changes which could\n" +"impact on the system as a whole. You'll have to create at least one regular\n" +"user for yourself -- this is the account which you should use for routine,\n" +"day-to-day usage. Although it's very easy to log in as \"root\" to do\n" +"anything and everything, it may also be very dangerous! A very simple\n" +"mistake could mean that your system will not work any more. If you make a\n" +"serious mistake as a regular user, the worst that can happen is that you'll\n" +"lose some information, but you will not affect the entire system.\n" +"\n" +"The first field asks you for a real name. Of course, this is not mandatory\n" +"-- you can actually enter whatever you like. DrakX will use the first word\n" +"you type in this field and copy it to the \"%s\" one, which is the name\n" +"this user will enter to log onto the system. If you like, you may override\n" +"the default and change the user name. The next step is to enter a password.\n" +"From a security point of view, a non-privileged (regular) user password is\n" +"not as crucial as the \"root\" password, but that's no reason to neglect it\n" +"by making it blank or too simple: after all, your files could be the ones\n" +"at risk.\n" +"\n" +"Once you click on \"%s\", you can add other users. Add a user for each one\n" +"of your friends, your father, your sister, etc. Click \"%s\" when you're\n" +"finished adding users.\n" +"\n" +"Clicking the \"%s\" button allows you to change the default \"shell\" for\n" +"that user (bash by default).\n" +"\n" +"When you're finished adding users, you'll be asked to choose a user who\n" +"will be automatically logged into the system when the computer boots up. If\n" +"you're interested in that feature (and do not care much about local\n" +"security), choose the desired user and window manager, then click on\n" +"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." +msgstr "" + +#: ../help.pm:54 +#, c-format +msgid "Do you want to use this feature?" +msgstr "Бу қулайликдан фойдаланишни истайсизми?" + +#: ../help.pm:57 +#, c-format +msgid "" +"Listed here are the existing Linux partitions detected on your hard drive.\n" +"You can keep the choices made by the wizard, since they are good for most\n" +"common installations. If you make any changes, you must at least define a\n" +"root partition (\"/\"). Do not choose too small a partition or you will not\n" +"be able to install enough software. If you want to store your data on a\n" +"separate partition, you will also need to create a \"/home\" partition\n" +"(only possible if you have more than one Linux partition available).\n" +"\n" +"Each partition is listed as follows: \"Name\", \"Capacity\".\n" +"\n" +"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc." +msgstr "" + +#: ../help.pm:88 +#, c-format +msgid "" +"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n" +"selected package is located on another CD-ROM, DrakX will eject the current\n" +"CD and ask you to insert the required one. If you do not have the requested\n" +"CD at hand, just click on \"%s\", the corresponding packages will not be\n" +"installed." +msgstr "" +"Mandriva Linux бир нечта компакт-дискларда тарқатилади. Агар танланган " +"пакет\n" +"бошқа компакт-дискда жойлашган бўлса, DrakX жорий компакт-дискни\n" +"чиқаради ва тегишлисини қўйишни сўрайди. Агар сўралган компакт-диск сизда\n" +"бўлмаса, \"%s\" тугмасини босинг. Бу ҳолда, тегишли пакетлар ўрнатилмайди." + +#: ../help.pm:95 +#, c-format +msgid "" +"It's now time to specify which programs you wish to install on your system.\n" +"There are thousands of packages available for Mandriva Linux, and to make " +"it\n" +"simpler to manage, they have been placed into groups of similar\n" +"applications.\n" +"\n" +"Mandriva Linux sorts package groups in four categories. You can mix and\n" +"match applications from the various categories, so a ``Workstation''\n" +"installation can still have applications from the ``Server'' category\n" +"installed.\n" +"\n" +" * \"%s\": if you plan to use your machine as a workstation, select one or\n" +"more of the groups in the workstation category.\n" +"\n" +" * \"%s\": if you plan on using your machine for programming, select the\n" +"appropriate groups from that category. The special \"LSB\" group will\n" +"configure your system so that it complies as much as possible with the\n" +"Linux Standard Base specifications.\n" +"\n" +" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" +"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" +"of the system. However, if you do not select the \"LSB\" group you will\n" +"still have a system which is nearly 100%% LSB-compliant.\n" +"\n" +" * \"%s\": if your machine is intended to be a server, select which of the\n" +"more common services you wish to install on your machine.\n" +"\n" +" * \"%s\": this is where you will choose your preferred graphical\n" +"environment. At least one must be selected if you want to have a graphical\n" +"interface available.\n" +"\n" +"Moving the mouse cursor over a group name will display a short explanatory\n" +"text about that group.\n" +"\n" +"You can check the \"%s\" box, which is useful if you're familiar with the\n" +"packages being offered or if you want to have total control over what will\n" +"be installed.\n" +"\n" +"If you start the installation in \"%s\" mode, you can deselect all groups\n" +"and prevent the installation of any new packages. This is useful for\n" +"repairing or updating an existing system.\n" +"\n" +"If you deselect all groups when performing a regular installation (as\n" +"opposed to an upgrade), a dialog will pop up suggesting different options\n" +"for a minimal installation:\n" +"\n" +" * \"%s\": install the minimum number of packages possible to have a\n" +"working graphical desktop.\n" +"\n" +" * \"%s\": installs the base system plus basic utilities and their\n" +"documentation. This installation is suitable for setting up a server.\n" +"\n" +" * \"%s\": will install the absolute minimum number of packages necessary\n" +"to get a working Linux system. With this installation you will only have a\n" +"command-line interface. The total size of this installation is about 65\n" +"megabytes." +msgstr "" + +#: ../help.pm:149 ../help.pm:591 +#, c-format +msgid "Upgrade" +msgstr "Янгилаш" + +#: ../help.pm:149 +#, c-format +msgid "With basic documentation" +msgstr "Асосий қўлланмалар билан" + +#: ../help.pm:149 +#, c-format +msgid "Truly minimal install" +msgstr "Ҳақиқий минимал ўрнатиш" + +#: ../help.pm:152 +#, c-format +msgid "" +"If you choose to install packages individually, the installer will present\n" +"a tree containing all packages classified by groups and subgroups. While\n" +"browsing the tree, you can select entire groups, subgroups, or individual\n" +"packages.\n" +"\n" +"Whenever you select a package on the tree, a description will appear on the\n" +"right to let you know the purpose of that package.\n" +"\n" +"!! If a server package has been selected, either because you specifically\n" +"chose the individual package or because it was part of a group of packages,\n" +"you'll be asked to confirm that you really want those servers to be\n" +"installed. By default Mandriva Linux will automatically start any installed\n" +"services at boot time. Even if they are safe and have no known issues at\n" +"the time the distribution was shipped, it is entirely possible that\n" +"security holes were discovered after this version of Mandriva Linux was\n" +"finalized. If you do not know what a particular service is supposed to do " +"or\n" +"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" +"the listed services and they will be started automatically at boot time. !!\n" +"\n" +"The \"%s\" option is used to disable the warning dialog which appears\n" +"whenever the installer automatically selects a package to resolve a\n" +"dependency issue. Some packages depend on others and the installation of\n" +"one particular package may require the installation of another package. The\n" +"installer can determine which packages are required to satisfy a dependency\n" +"to successfully complete the installation.\n" +"\n" +"The tiny floppy disk icon at the bottom of the list allows you to load a\n" +"package list created during a previous installation. This is useful if you\n" +"have a number of machines that you wish to configure identically. Clicking\n" +"on this icon will ask you to insert the floppy disk created at the end of\n" +"another installation. See the second tip of the last step on how to create\n" +"such a floppy." +msgstr "" + +#: ../help.pm:183 +#, c-format +msgid "Automatic dependencies" +msgstr "" + +#: ../help.pm:186 +#, c-format +msgid "" +"\"%s\": clicking on the \"%s\" button will open the printer configuration\n" +"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" +"information on how to set up a new printer. The interface presented in our\n" +"manual is similar to the one used during installation." +msgstr "" + +#: ../help.pm:192 +#, c-format +msgid "" +"This dialog is used to select which services you wish to start at boot\n" +"time.\n" +"\n" +"DrakX will list all services available on the current installation. Review\n" +"each one of them carefully and uncheck those which are not needed at boot\n" +"time.\n" +"\n" +"A short explanatory text will be displayed about a service when it is\n" +"selected. However, if you're not sure whether a service is useful or not,\n" +"it is safer to leave the default behavior.\n" +"\n" +"!! At this stage, be very careful if you intend to use your machine as a\n" +"server: you probably do not want to start any services which you do not " +"need.\n" +"Please remember that some services can be dangerous if they're enabled on a\n" +"server. In general, select only those services you really need. !!" +msgstr "" + +#: ../help.pm:209 +#, c-format +msgid "" +"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" +"local time according to the time zone you selected. If the clock on your\n" +"motherboard is set to local time, you may deactivate this by unselecting\n" +"\"%s\", which will let GNU/Linux know that the system clock and the\n" +"hardware clock are in the same time zone. This is useful when the machine\n" +"also hosts another operating system.\n" +"\n" +"The \"%s\" option will automatically regulate the system clock by\n" +"connecting to a remote time server on the Internet. For this feature to\n" +"work, you must have a working Internet connection. We recommend that you\n" +"choose a time server located near you. This option actually installs a time\n" +"server which can be used by other machines on your local network as well." +msgstr "" + +#: ../help.pm:220 +#, c-format +msgid "Automatic time synchronization" +msgstr "" + +#: ../help.pm:223 +#, fuzzy, c-format +msgid "" +"Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If this is not correct, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the situation where different servers are available for your card,\n" +"with or without 3D acceleration, you're asked to choose the server which\n" +"best suits your needs." +msgstr "" +"Монитор\n" +"\n" +" Одатда, ўрнатувчи компьютерингизга уланган мониторни\n" +"автоматик равишда аниқлайди ва мослайди. Агар бу нотўғри\n" +"бўлса, аслида уланган мониторни рўйхатдан танлашингиз мумкин." + +#: ../help.pm:234 +#, c-format +msgid "" +"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" +"on which all the graphical environments (KDE, GNOME, AfterStep,\n" +"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n" +"\n" +"You'll see a list of different parameters to change to get an optimal\n" +"graphical display.\n" +"\n" +"Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If this is not correct, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the situation where different servers are available for your card,\n" +"with or without 3D acceleration, you're asked to choose the server which\n" +"best suits your needs.\n" +"\n" +"\n" +"\n" +"Monitor\n" +"\n" +" Normally the installer will automatically detect and configure the\n" +"monitor connected to your machine. If it is not correct, you can choose\n" +"from this list the monitor which is connected to your computer.\n" +"\n" +"\n" +"\n" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"graphics hardware. Choose the one which best suits your needs (you will be\n" +"able to make changes after the installation). A sample of the chosen\n" +"configuration is shown in the monitor picture.\n" +"\n" +"\n" +"\n" +"Test\n" +"\n" +" Depending on your hardware, this entry might not appear.\n" +"\n" +" The system will try to open a graphical screen at the desired\n" +"resolution. If you see the test message during the test and answer \"%s\",\n" +"then DrakX will proceed to the next step. If you do not see it, then it\n" +"means that some part of the auto-detected configuration was incorrect and\n" +"the test will automatically end after 12 seconds and return you to the\n" +"menu. Change settings until you get a correct graphical display.\n" +"\n" +"\n" +"\n" +"Options\n" +"\n" +" This steps allows you to choose whether you want your machine to\n" +"automatically switch to a graphical interface at boot. Obviously, you may\n" +"want to check \"%s\" if your machine is to act as a server, or if you were\n" +"not successful in getting the display configured." +msgstr "" + +#: ../help.pm:291 +#, c-format +msgid "" +"Monitor\n" +"\n" +" Normally the installer will automatically detect and configure the\n" +"monitor connected to your machine. If it is not correct, you can choose\n" +"from this list the monitor which is connected to your computer." +msgstr "" +"Монитор\n" +"\n" +" Одатда, ўрнатувчи компьютерингизга уланган мониторни\n" +"автоматик равишда аниқлайди ва мослайди. Агар бу нотўғри\n" +"бўлса, аслида уланган мониторни рўйхатдан танлашингиз мумкин." + +#: ../help.pm:298 +#, c-format +msgid "" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"graphics hardware. Choose the one which best suits your needs (you will be\n" +"able to make changes after the installation). A sample of the chosen\n" +"configuration is shown in the monitor picture." +msgstr "" + +#: ../help.pm:306 +#, c-format +msgid "" +"In the situation where different servers are available for your card, with\n" +"or without 3D acceleration, you're asked to choose the server which best\n" +"suits your needs." +msgstr "" + +#: ../help.pm:311 +#, c-format +msgid "" +"Options\n" +"\n" +" This steps allows you to choose whether you want your machine to\n" +"automatically switch to a graphical interface at boot. Obviously, you may\n" +"want to check \"%s\" if your machine is to act as a server, or if you were\n" +"not successful in getting the display configured." +msgstr "" + +#: ../help.pm:319 +#, c-format +msgid "" +"You now need to decide where you want to install the Mandriva Linux\n" +"operating system on your hard drive. If your hard drive is empty or if an\n" +"existing operating system is using all the available space you will have to\n" +"partition the drive. Basically, partitioning a hard drive means to\n" +"logically divide it to create the space needed to install your new\n" +"Mandriva Linux system.\n" +"\n" +"Because the process of partitioning a hard drive is usually irreversible\n" +"and can lead to data losses, partitioning can be intimidating and stressful\n" +"for the inexperienced user. Fortunately, DrakX includes a wizard which\n" +"simplifies this process. Before continuing with this step, read through the\n" +"rest of this section and above all, take your time.\n" +"\n" +"Depending on the configuration of your hard drive, several options are\n" +"available:\n" +"\n" +" * \"%s\". This option will perform an automatic partitioning of your blank\n" +"drive(s). If you use this option there will be no further prompts.\n" +"\n" +" * \"%s\". The wizard has detected one or more existing Linux partitions on\n" +"your hard drive. If you want to use them, choose this option. You will then\n" +"be asked to choose the mount points associated with each of the partitions.\n" +"The legacy mount points are selected by default, and for the most part it's\n" +"a good idea to keep them.\n" +"\n" +" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" +"all the space available on it, you will have to create free space for\n" +"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" +"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" +"FAT or NTFS partition. Resizing can be performed without the loss of any\n" +"data, provided you've previously defragmented the Windows partition.\n" +"Backing up your data is strongly recommended. Using this option is\n" +"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n" +"the same computer.\n" +"\n" +" Before choosing this option, please understand that after this\n" +"procedure, the size of your Microsoft Windows partition will be smaller\n" +"than when you started. You'll have less free space under Microsoft Windows\n" +"to store your data or to install new software.\n" +"\n" +" * \"%s\". If you want to delete all data and all partitions present on\n" +"your hard drive and replace them with your new Mandriva Linux system, " +"choose\n" +"this option. Be careful, because you will not be able to undo this " +"operation\n" +"after you confirm.\n" +"\n" +" !! If you choose this option, all data on your disk will be deleted. !!\n" +"\n" +" * \"%s\". This option appears when the hard drive is entirely taken by\n" +"Microsoft Windows. Choosing this option will simply erase everything on the\n" +"drive and begin fresh, partitioning everything from scratch.\n" +"\n" +" !! If you choose this option, all data on your disk will be lost. !!\n" +"\n" +" * \"%s\". Choose this option if you want to manually partition your hard\n" +"drive. Be careful -- it is a powerful but dangerous choice and you can very\n" +"easily lose all your data. That's why this option is really only\n" +"recommended if you have done something like this before and have some\n" +"experience. For more instructions on how to use the DiskDrake utility,\n" +"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." +msgstr "" + +#: ../help.pm:377 +#, c-format +msgid "Use existing partition" +msgstr "Дискда бор қисмлардан фойдаланиш" + +#: ../help.pm:377 +#, c-format +msgid "Erase entire disk" +msgstr "Бутун дискни ўчириш" + +#: ../help.pm:380 +#, c-format +msgid "" +"There you are. Installation is now complete and your GNU/Linux system is\n" +"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" +"to remove the installation media (CD-ROM or floppy). The first thing you\n" +"should see after your computer has finished doing its hardware tests is the\n" +"boot-loader menu, giving you the choice of which operating system to start.\n" +"\n" +"The \"%s\" button shows two more buttons to:\n" +"\n" +" * \"%s\": enables you to create an installation floppy disk which will\n" +"automatically perform a whole installation without the help of an operator,\n" +"similar to the installation you've just configured.\n" +"\n" +" Note that two different options are available after clicking on that\n" +"button:\n" +"\n" +" * \"%s\". This is a partially automated installation. The partitioning\n" +"step is the only interactive procedure.\n" +"\n" +" * \"%s\". Fully automated installation: the hard disk is completely\n" +"rewritten, all data is lost.\n" +"\n" +" This feature is very handy when installing on a number of similar\n" +"machines. See the Auto install section on our web site for more\n" +"information.\n" +"\n" +" * \"%s\"(*): saves a list of the packages selected in this installation.\n" +"To use this selection with another installation, insert the floppy and\n" +"start the installation. At the prompt, press the [F1] key, type >>linux\n" +"defcfg=\"floppy\"<< and press the [Enter] key.\n" +"\n" +"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" +"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" +"/dev/fd0\"." +msgstr "" + +#: ../help.pm:412 +#, c-format +msgid "Generate auto-install floppy" +msgstr "Авто-ўрнатиш дискетни яратиш" + +#: ../help.pm:415 +#, c-format +msgid "" +"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" +"reformat some of them and erase any data they contain. To do so, please\n" +"select those partitions as well.\n" +"\n" +"Please note that it's not necessary to reformat all pre-existing\n" +"partitions. You must reformat the partitions containing the operating\n" +"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " +"reformat\n" +"partitions containing data that you wish to keep (typically \"/home\").\n" +"\n" +"Please be careful when selecting partitions. After the formatting is\n" +"completed, all data on the selected partitions will be deleted and you\n" +"will not be able to recover it.\n" +"\n" +"Click on \"%s\" when you're ready to format the partitions.\n" +"\n" +"Click on \"%s\" if you want to choose another partition for your new\n" +"Mandriva Linux operating system installation.\n" +"\n" +"Click on \"%s\" if you wish to select partitions which will be checked for\n" +"bad blocks on the disk." +msgstr "" + +#: ../help.pm:437 +#, c-format +msgid "" +"By the time you install Mandriva Linux, it's likely that some packages will\n" +"have been updated since the initial release. Bugs may have been fixed,\n" +"security issues resolved. To allow you to benefit from these updates,\n" +"you're now able to download them from the Internet. Check \"%s\" if you\n" +"have a working Internet connection, or \"%s\" if you prefer to install\n" +"updated packages later.\n" +"\n" +"Choosing \"%s\" will display a list of web locations from which updates can\n" +"be retrieved. You should choose one near to you. A package-selection tree\n" +"will appear: review the selection, and press \"%s\" to retrieve and install\n" +"the selected package(s), or \"%s\" to abort." +msgstr "" + +#: ../help.pm:450 +#, c-format +msgid "" +"At this point, DrakX will allow you to choose the security level you desire\n" +"for your machine. As a rule of thumb, the security level should be set\n" +"higher if the machine is to contain crucial data, or if it's to be directly\n" +"exposed to the Internet. The trade-off that a higher security level is\n" +"generally obtained at the expense of ease of use.\n" +"\n" +"If you do not know what to choose, keep the default option. You'll be able\n" +"to change it later with the draksec tool, which is part of Mandriva Linux\n" +"Control Center.\n" +"\n" +"Fill the \"%s\" field with the e-mail address of the person responsible for\n" +"security. Security messages will be sent to that address." +msgstr "" + +#: ../help.pm:461 +#, c-format +msgid "Security Administrator" +msgstr "Хавфсизлик бошқарувчиси" + +#: ../help.pm:464 +#, c-format +msgid "" +"At this point, you need to choose which partition(s) will be used for the\n" +"installation of your Mandriva Linux system. If partitions have already been\n" +"defined, either from a previous installation of GNU/Linux or by another\n" +"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" +"partitions must be defined.\n" +"\n" +"To create partitions, you must first select a hard drive. You can select\n" +"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" +"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" +"\n" +"To partition the selected hard drive, you can use these options:\n" +"\n" +" * \"%s\": this option deletes all partitions on the selected hard drive\n" +"\n" +" * \"%s\": this option enables you to automatically create ext3 and swap\n" +"partitions in the free space of your hard drive\n" +"\n" +"\"%s\": gives access to additional features:\n" +"\n" +" * \"%s\": saves the partition table to a floppy. Useful for later\n" +"partition-table recovery if necessary. It is strongly recommended that you\n" +"perform this step.\n" +"\n" +" * \"%s\": allows you to restore a previously saved partition table from a\n" +"floppy disk.\n" +"\n" +" * \"%s\": if your partition table is damaged, you can try to recover it\n" +"using this option. Please be careful and remember that it does not always\n" +"work.\n" +"\n" +" * \"%s\": discards all changes and reloads the partition table that was\n" +"originally on the hard drive.\n" +"\n" +" * \"%s\": un-checking this option will force users to manually mount and\n" +"unmount removable media such as floppies and CD-ROMs.\n" +"\n" +" * \"%s\": use this option if you wish to use a wizard to partition your\n" +"hard drive. This is recommended if you do not have a good understanding of\n" +"partitioning.\n" +"\n" +" * \"%s\": use this option to cancel your changes.\n" +"\n" +" * \"%s\": allows additional actions on partitions (type, options, format)\n" +"and gives more information about the hard drive.\n" +"\n" +" * \"%s\": when you are finished partitioning your hard drive, this will\n" +"save your changes back to disk.\n" +"\n" +"When defining the size of a partition, you can finely set the partition\n" +"size by using the Arrow keys of your keyboard.\n" +"\n" +"Note: you can reach any option using the keyboard. Navigate through the\n" +"partitions using [Tab] and the [Up/Down] arrows.\n" +"\n" +"When a partition is selected, you can use:\n" +"\n" +" * Ctrl-c to create a new partition (when an empty partition is selected)\n" +"\n" +" * Ctrl-d to delete a partition\n" +"\n" +" * Ctrl-m to set the mount point\n" +"\n" +"To get information about the different file system types available, please\n" +"read the ext2FS chapter from the ``Reference Manual''.\n" +"\n" +"If you are installing on a PPC machine, you will want to create a small HFS\n" +"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" +"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" +"may find it a useful place to store a spare kernel and ramdisk images for\n" +"emergency boot situations." +msgstr "" + +#: ../help.pm:533 +#, c-format +msgid "Removable media auto-mounting" +msgstr "" + +#: ../help.pm:533 +#, c-format +msgid "Toggle between normal/expert mode" +msgstr "Одий/эксперт усулига ўтиш" + +#: ../help.pm:536 +#, c-format +msgid "" +"More than one Microsoft partition has been detected on your hard drive.\n" +"Please choose the one which you want to resize in order to install your new\n" +"Mandriva Linux operating system.\n" +"\n" +"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" +"\"Capacity\".\n" +"\n" +"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc.\n" +"\n" +"\"Windows name\" is the letter of your hard drive under Windows (the first\n" +"disk or partition is called \"C:\")." +msgstr "" + +#: ../help.pm:567 +#, c-format +msgid "" +"\"%s\": check the current country selection. If you're not in this country,\n" +"click on the \"%s\" button and choose another. If your country is not in " +"the\n" +"list shown, click on the \"%s\" button to get the complete country list." +msgstr "" + +#: ../help.pm:572 +#, c-format +msgid "" +"This step is activated only if an existing GNU/Linux partition has been\n" +"found on your machine.\n" +"\n" +"DrakX now needs to know if you want to perform a new installation or an\n" +"upgrade of an existing Mandriva Linux system:\n" +"\n" +" * \"%s\". For the most part, this completely wipes out the old system.\n" +"However, depending on your partitioning scheme, you can prevent some of\n" +"your existing data (notably \"home\" directories) from being over-written.\n" +"If you wish to change how your hard drives are partitioned, or to change\n" +"the file system, you should use this option.\n" +"\n" +" * \"%s\". This installation class allows you to update the packages\n" +"currently installed on your Mandriva Linux system. Your current " +"partitioning\n" +"scheme and user data will not be altered. Most of the other configuration\n" +"steps remain available and are similar to a standard installation.\n" +"\n" +"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n" +"running version \"8.1\" or later. Performing an upgrade on versions prior\n" +"to Mandriva Linux version \"8.1\" is not recommended." +msgstr "" + +#: ../help.pm:594 +#, c-format +msgid "" +"Depending on the language you chose (), DrakX will automatically select a\n" +"particular type of keyboard configuration. Check that the selection suits\n" +"you or choose another keyboard layout.\n" +"\n" +"Also, you may not have a keyboard which corresponds exactly to your\n" +"language: for example, if you are an English-speaking Swiss native, you may\n" +"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" +"you may find yourself in the same situation where your native language and\n" +"country-set keyboard do not match. In either case, this installation step\n" +"will allow you to select an appropriate keyboard from a list.\n" +"\n" +"Click on the \"%s\" button to be shown a list of supported keyboards.\n" +"\n" +"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" +"dialog will allow you to choose the key binding which will switch the\n" +"keyboard between the Latin and non-Latin layouts." +msgstr "" + +#: ../help.pm:612 +#, c-format +msgid "" +"The first step is to choose your preferred language.\n" +"\n" +"Your choice of preferred language will affect the installer, the\n" +"documentation, and the system in general. First select the region you're\n" +"located in, then the language you speak.\n" +"\n" +"Clicking on the \"%s\" button will allow you to select other languages to\n" +"be installed on your workstation, thereby installing the language-specific\n" +"files for system documentation and applications. For example, if Spanish\n" +"users are to use your machine, select English as the default language in\n" +"the tree view and \"%s\" in the Advanced section.\n" +"\n" +"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" +"cover all existing languages. However full support for it in GNU/Linux is\n" +"still under development. For that reason, Mandriva Linux's use of UTF-8 " +"will\n" +"depend on the user's choices:\n" +"\n" +" * If you choose a language with a strong legacy encoding (latin1\n" +"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" +"iso-8859-2 languages), the legacy encoding will be used by default;\n" +"\n" +" * Other languages will use unicode by default;\n" +"\n" +" * If two or more languages are required, and those languages are not using\n" +"the same encoding, then unicode will be used for the whole system;\n" +"\n" +" * Finally, unicode can also be forced for use throughout the system at a\n" +"user's request by selecting the \"%s\" option independently of which\n" +"languages were been chosen.\n" +"\n" +"Note that you're not limited to choosing a single additional language. You\n" +"may choose several, or even install them all by selecting the \"%s\" box.\n" +"Selecting support for a language means translations, fonts, spell checkers,\n" +"etc. will also be installed for that language.\n" +"\n" +"To switch between the various languages installed on your system, you can\n" +"launch the \"localedrake\" command as \"root\" to change the language used\n" +"by the entire system. Running the command as a regular user will only\n" +"change the language settings for that particular user." +msgstr "" + +#: ../help.pm:650 +#, c-format +msgid "Espanol" +msgstr "" + +#: ../help.pm:653 +#, c-format +msgid "" +"Usually, DrakX has no problems detecting the number of buttons on your\n" +"mouse. If it does, it assumes you have a two-button mouse and will\n" +"configure it for third-button emulation. The third-button mouse button of a\n" +"two-button mouse can be obtained by simultaneously clicking the left and\n" +"right mouse buttons. DrakX will automatically know whether your mouse uses\n" +"a PS/2, serial or USB interface.\n" +"\n" +"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" +"mouse. DrakX will then configure your mouse so that you can simulate the\n" +"wheel with it: to do so, press the middle button and move your mouse\n" +"pointer up and down.\n" +"\n" +"If for some reason you wish to specify a different type of mouse, select it\n" +"from the list provided.\n" +"\n" +"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" +"will work with nearly all mice.\n" +"\n" +"If you choose a mouse other than the default one, a test screen will be\n" +"displayed. Use the buttons and wheel to verify that the settings are\n" +"correct and that the mouse is working correctly. If the mouse is not\n" +"working well, press the space bar or [Return] key to cancel the test and\n" +"you will be returned to the mouse list.\n" +"\n" +"Occasionally wheel mice are not detected automatically, so you will need to\n" +"select your mouse from a list. Be sure to select the one corresponding to\n" +"the port that your mouse is attached to. After selecting a mouse and\n" +"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" +"Scroll the mouse wheel to ensure that it is activating correctly. As you\n" +"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" +"Test the buttons and check that the mouse pointer moves on-screen as you\n" +"move your mouse about." +msgstr "" + +#: ../help.pm:684 +#, c-format +msgid "with Wheel emulation" +msgstr "" + +#: ../help.pm:684 +#, c-format +msgid "Universal | Any PS/2 & USB mice" +msgstr "Истаган PS/2 ва USB сичқонча" + +#: ../help.pm:687 +#, c-format +msgid "" +"Please select the correct port. For example, the \"COM1\" port under\n" +"Windows is named \"ttyS0\" under GNU/Linux." +msgstr "" +"Илтимос тўғри портни танланг. Масалан, Windows'даги \"COM1\"\n" +"портининг номи GNU/Linux'да \"ttyS0\"." + +#: ../help.pm:691 +#, c-format +msgid "" +"This is the most crucial decision point for the security of your GNU/Linux\n" +"system: you must enter the \"root\" password. \"Root\" is the system\n" +"administrator and is the only user authorized to make updates, add users,\n" +"change the overall system configuration, and so on. In short, \"root\" can\n" +"do everything! That's why you must choose a password which is difficult to\n" +"guess: DrakX will tell you if the password you chose is too simple. As you\n" +"can see, you're not forced to enter a password, but we strongly advise\n" +"against this. GNU/Linux is just as prone to operator error as any other\n" +"operating system. Since \"root\" can overcome all limitations and\n" +"unintentionally erase all data on partitions by carelessly accessing the\n" +"partitions themselves, it is important that it be difficult to become\n" +"\"root\".\n" +"\n" +"The password should be a mixture of alphanumeric characters and at least 8\n" +"characters long. Never write down the \"root\" password -- it makes it far\n" +"too easy to compromise your system.\n" +"\n" +"One caveat: do not make the password too long or too complicated because " +"you\n" +"must be able to remember it!\n" +"\n" +"The password will not be displayed on screen as you type it. To reduce the\n" +"chance of a blind typing error you'll need to enter the password twice. If\n" +"you do happen to make the same typing error twice, you'll have to use this\n" +"``incorrect'' password the first time you'll try to connect as \"root\".\n" +"\n" +"If you want an authentication server to control access to your computer,\n" +"click on the \"%s\" button.\n" +"\n" +"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" +"services, select the appropriate one for \"%s\". If you do not know which\n" +"one to use, you should ask your network administrator.\n" +"\n" +"If you happen to have problems with remembering passwords, or if your\n" +"computer will never be connected to the Internet and you absolutely trust\n" +"everybody who uses your computer, you can choose to have \"%s\"." +msgstr "" + +#: ../help.pm:725 +#, c-format +msgid "authentication" +msgstr "тасдиқлаш" + +#: ../help.pm:728 +#, c-format +msgid "" +"A boot loader is a little program which is started by the computer at boot\n" +"time. It's responsible for starting up the whole system. Normally, the boot\n" +"loader installation is totally automated. DrakX will analyze the disk boot\n" +"sector and act according to what it finds there:\n" +"\n" +" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" +"boot sector. This way you'll be able to load either GNU/Linux or any other\n" +"OS installed on your machine.\n" +"\n" +" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" +"\n" +"If DrakX can not determine where to place the boot sector, it'll ask you\n" +"where it should place it. Generally, the \"%s\" is the safest place.\n" +"Choosing \"%s\" will not install any boot loader. Use this option only if " +"you\n" +"know what you're doing." +msgstr "" + +#: ../help.pm:745 +#, c-format +msgid "" +"Now, it's time to select a printing system for your computer. Other\n" +"operating systems may offer you one, but Mandriva Linux offers two. Each of\n" +"the printing systems is best suited to particular types of configuration.\n" +"\n" +" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" +"if you have a direct connection to your printer, you want to be able to\n" +"panic out of printer jams, and you do not have networked printers. (\"%s\"\n" +"will handle only very simple network cases and is somewhat slow when used\n" +"within networks.) It's recommended that you use \"pdq\" if this is your\n" +"first experience with GNU/Linux.\n" +"\n" +" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" +"choice for printing to your local printer or to one halfway around the\n" +"planet. It's simple to configure and can act as a server or a client for\n" +"the ancient \"lpd\" printing system, so it's compatible with older\n" +"operating systems which may still need print services. While quite\n" +"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" +"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" +"\"%s\" includes graphical front-ends for printing or choosing printer\n" +"options and for managing the printer.\n" +"\n" +"If you make a choice now, and later find that you do not like your printing\n" +"system you may change it by running PrinterDrake from the Mandriva Linux\n" +"Control Center and clicking on the \"%s\" button." +msgstr "" + +#: ../help.pm:768 +#, c-format +msgid "pdq" +msgstr "" + +#: ../help.pm:768 +#, c-format +msgid "Expert" +msgstr "Эксперт" + +#: ../help.pm:771 +#, c-format +msgid "" +"DrakX will first detect any IDE devices present in your computer. It will\n" +"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" +"found, DrakX will automatically install the appropriate driver.\n" +"\n" +"Because hardware detection is not foolproof, DrakX may fail in detecting\n" +"your hard drives. If so, you'll have to specify your hardware by hand.\n" +"\n" +"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" +"want to configure options for it. You should allow DrakX to probe the\n" +"hardware for the card-specific options which are needed to initialize the\n" +"adapter. Most of the time, DrakX will get through this step without any\n" +"issues.\n" +"\n" +"If DrakX is not able to probe for the options to automatically determine\n" +"which parameters need to be passed to the hardware, you'll need to manually\n" +"configure the driver." +msgstr "" + +#: ../help.pm:789 +#, c-format +msgid "" +"\"%s\": if a sound card is detected on your system, it'll be displayed\n" +"here. If you notice the sound card is not the one actually present on your\n" +"system, you can click on the button and choose a different driver." +msgstr "" +"\"%s\": агар компьютерда товуш картаси аниқланса у шу ерда кўрсатилади.\n" +"Агар кўрсатилган товуш картаси компьютердаги товуш картаси\n" +"билан мос келмаса, тугмани босиб бошқа драйверни танлашингиз мумкин." + +#: ../help.pm:794 +#, c-format +msgid "" +"As a review, DrakX will present a summary of information it has gathered\n" +"about your system. Depending on the hardware installed on your machine, you\n" +"may have some or all of the following entries. Each entry is made up of the\n" +"hardware item to be configured, followed by a quick summary of the current\n" +"configuration. Click on the corresponding \"%s\" button to make the change.\n" +"\n" +" * \"%s\": check the current keyboard map configuration and change it if\n" +"necessary.\n" +"\n" +" * \"%s\": check the current country selection. If you're not in this\n" +"country, click on the \"%s\" button and choose another. If your country\n" +"is not in the list shown, click on the \"%s\" button to get the complete\n" +"country list.\n" +"\n" +" * \"%s\": by default, DrakX deduces your time zone based on the country\n" +"you have chosen. You can click on the \"%s\" button here if this is not\n" +"correct.\n" +"\n" +" * \"%s\": verify the current mouse configuration and click on the button\n" +"to change it if necessary.\n" +"\n" +" * \"%s\": clicking on the \"%s\" button will open the printer\n" +"configuration wizard. Consult the corresponding chapter of the ``Starter\n" +"Guide'' for more information on how to set up a new printer. The interface\n" +"presented in our manual is similar to the one used during installation.\n" +"\n" +" * \"%s\": if a sound card is detected on your system, it'll be displayed\n" +"here. If you notice the sound card is not the one actually present on your\n" +"system, you can click on the button and choose a different driver.\n" +"\n" +" * \"%s\": if you have a TV card, this is where information about its\n" +"configuration will be displayed. If you have a TV card and it is not\n" +"detected, click on \"%s\" to try to configure it manually.\n" +"\n" +" * \"%s\": you can click on \"%s\" to change the parameters associated with\n" +"the card if you feel the configuration is wrong.\n" +"\n" +" * \"%s\": by default, DrakX configures your graphical interface in\n" +"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" +"\"%s\" to reconfigure your graphical interface.\n" +"\n" +" * \"%s\": if you wish to configure your Internet or local network access,\n" +"you can do so now. Refer to the printed documentation or use the\n" +"Mandriva Linux Control Center after the installation has finished to " +"benefit\n" +"from full in-line help.\n" +"\n" +" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" +"you're installing on is to be located behind a proxy server.\n" +"\n" +" * \"%s\": this entry allows you to redefine the security level as set in a\n" +"previous step ().\n" +"\n" +" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" +"idea to protect yourself from intrusions by setting up a firewall. Consult\n" +"the corresponding section of the ``Starter Guide'' for details about\n" +"firewall settings.\n" +"\n" +" * \"%s\": if you wish to change your bootloader configuration, click this\n" +"button. This should be reserved to advanced users. Refer to the printed\n" +"documentation or the in-line help about bootloader configuration in the\n" +"Mandriva Linux Control Center.\n" +"\n" +" * \"%s\": through this entry you can fine tune which services will be run\n" +"on your machine. If you plan to use this machine as a server it's a good\n" +"idea to review this setup." +msgstr "" + +#: ../help.pm:858 +#, c-format +msgid "ISDN card" +msgstr "ISDN karta" + +#: ../help.pm:858 +#, c-format +msgid "Graphical Interface" +msgstr "График интерфейс" + +#: ../help.pm:861 +#, c-format +msgid "" +"Choose the hard drive you want to erase in order to install your new\n" +"Mandriva Linux partition. Be careful, all data on this drive will be lost\n" +"and will not be recoverable!" +msgstr "" + +#: ../help.pm:866 +#, c-format +msgid "" +"Click on \"%s\" if you want to delete all data and partitions present on\n" +"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" +"to recover any data and partitions present on this hard drive, including\n" +"any Windows data.\n" +"\n" +"Click on \"%s\" to quit this operation without losing data and partitions\n" +"present on this hard drive." +msgstr "" +"Бу дискдаги барча маълумотни ва дискнинг барча қисмларини\n" +"ўчириш учун \"%s\"ни босинг. Эҳтиёт бўлинг, \"%s\"ни босганингиздан\n" +"кейин дискдаги маълумотни ва дискнинг қисмларини, шу жумлада\n" +"Windows маълумотини ҳам, тиклаб бўлмайди.\n" +"\n" +"Маълумотни ва дискнинг барча қисмларини йўқотмасдан бу\n" +"операцияни тўхтатиш учун \"%s\"ни босинг." + +#: ../help.pm:872 +#, c-format +msgid "Next ->" +msgstr "Кейинги ->" + +#: ../help.pm:872 +#, c-format +msgid "<- Previous" +msgstr "<- Олдинги" + -- cgit v1.2.1