From e1729dfdb9c341fe0b9fed7d7b0a80691a547d82 Mon Sep 17 00:00:00 2001
From: Chmouel Boudjnah <chmouel@mandriva.org>
Date: Thu, 1 Jul 1999 12:29:54 +0000
Subject: "See_The_Changelog"

---
 perl-install/detect_devices.pm | 151 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 151 insertions(+)
 create mode 100644 perl-install/detect_devices.pm

(limited to 'perl-install/detect_devices.pm')

diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
new file mode 100644
index 000000000..8f1fac97d
--- /dev/null
+++ b/perl-install/detect_devices.pm
@@ -0,0 +1,151 @@
+package detect_devices;
+
+use diagnostics;
+use strict;
+
+use log;
+use common qw(:common :file);
+use c;
+
+
+my $scsiDeviceAvailable;
+my $CSADeviceAvailable;
+
+1;
+
+sub get {
+    # Detect the default BIOS boot harddrive is kind of tricky. We may have IDE,
+    # SCSI and RAID devices on the same machine. From what I see so far, the default
+    # BIOS boot harddrive will be
+    # 1. The first IDE device if IDE exists. Or 
+    # 2. The first SCSI device if SCSI exists. Or
+    # 3. The first RAID device if RAID exists.
+
+    map { &{$_->[0]}() ? &{$_->[1]}() : () }
+    [ \&hasIDE, \&getIDE ],
+    [ \&hasSCSI, \&getSCSI ],
+    [ \&hasDAC960, \&getDAC960 ],
+    [ \&hasCompaqSmartArray, \&getCompaqSmartArray ];
+}
+sub hds() { grep { $_->{type} eq 'hd' } get(); }
+sub cdroms() { grep { $_->{type} eq 'cdrom' } get(); }
+
+sub hasSCSI() {
+    defined $scsiDeviceAvailable and return $scsiDeviceAvailable;
+    local *F;
+    open F, "/proc/scsi/scsi" or log::l("failed to open /proc/scsi/scsi: $!"), return 0;
+    foreach (<F>) {
+	/devices: none/ and log::l("no scsi devices are available"), return $scsiDeviceAvailable = 0;
+    }
+    log::l("scsi devices are available");
+    $scsiDeviceAvailable = 1;
+}
+sub hasIDE() { 1 }
+sub hasDAC960() { 1 }
+
+sub hasCompaqSmartArray() {
+    defined $CSADeviceAvailable and return $CSADeviceAvailable;
+    -r "/proc/array/ida0" or log::l("failed to open /proc/array/ida0: $!"), return $CSADeviceAvailable = 0;
+    log::l("Compaq Smart Array controllers available");
+    $CSADeviceAvailable = 1;
+}
+
+sub getSCSI() {
+    my @drives;
+    my ($driveNum, $cdromNum, $tapeNum) = qw(0 0 0);
+    my $err = sub { chop; log::l("unexpected line in /proc/scsi/scsi: $_"); error() };
+    local $_;
+
+    local *F;
+    open F, "/proc/scsi/scsi" or return &$err();
+    $_ = <F>; /^Attached devices:/ or return &$err();
+    while ($_ = <F>) {
+	my ($id) = /^Host:.*?Id: (\d+)/ or return &$err();
+	$_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or return &$err();
+	$_ = <F>; my ($type) = /^\s*Type:\s*(.*)/ or &$err();
+	my $device;
+	if ($type =~ /Direct-Access/) {
+	    $type = 'hd';
+	    $device = "sd" . chr($driveNum++ + ord('a'));
+	} elsif ($type =~ /Sequential-Access/) {
+	    $type = 'tape';
+	    $device = "st" . $tapeNum++;
+	} elsif ($type =~ /CD-ROM/) {
+	    $type = 'cdrom';
+	    $device = "scd" . $cdromNum++;
+	}
+	$device and push @drives, { device => $device, type => $type, info => "$vendor $model", id => $id, bus => 0 };
+    }
+    @drives;
+}
+
+sub getIDE() {
+    my @idi;
+
+    -r "/proc/ide" or die "sorry, /proc/ide not available, seems like you have a pre-2.2 kernel\n => not handled yet :(";
+
+    # Great. 2.2 kernel, things are much easier and less error prone. 
+    foreach my $d (glob_('/proc/ide/hd*')) {
+	my ($t) = chop_(cat_("$d/media"));
+	my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
+	my ($info) = chop_(cat_("$d/model")); $info ||= "(none)";
+
+	my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
+	push @idi, { type => $type, device => basename($d), info => $info, bus => $num/2, id => $num%2 };
+    }
+    @idi;
+}
+
+
+sub getCompaqSmartArray() {
+    my @idi;
+    my $f;
+
+    for (my $i = 0; -r ($f = "/proc/array/ida$i"); $i++) {
+	local *F;
+	open F, $f or die;
+	local $_ = <F>;
+	my ($name) = m|ida/(.*?):| or next;
+	push @idi, { device => $name, info => "Compaq RAID logical disk", type => 'hd' };
+    }
+    @idi;
+}
+
+sub getDAC960() {
+    my @idi;
+    my $file = "/var/log/dmesg";
+    -r $file or $file = "/tmp/syslog";
+
+    local *F;
+    open F, $file or die "Failed to open $file: $!";
+
+    # We are looking for lines of this format:DAC960#0:
+    # /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012    
+    foreach (<F>) {
+	my ($devicename, $info) = m|/dev/rd/(.*?): (.*?),| or next;
+	push @idi, { info => $info, type => 'hd', devicename => $devicename }; 
+	log::l("DAC960: $devicename: $info");
+    }
+    @idi;
+}
+
+
+sub getNet() {
+    # I should probably ask which device to use if multiple ones are available -- oh well :-( 
+    foreach (qw(eth0 tr0 plip0 plip1 plip2 fddi0)) {
+	hasNetDevice($_) and log::l("$_ is available -- using it for networking"), return $_;
+    }
+    undef;
+}
+sub getPlip() {
+    foreach (0..2) {
+	hasNetDevice("plip$_") and log::l("plip$_ will be used for PLIP"), return "plip$_";
+    }
+    undef;
+}
+
+sub hasNet() { goto &getNet }
+sub hasPlip() { goto &getPlip }
+sub hasEthernet() { hasNetDevice("eth0"); }
+sub hasTokenRing() { hasNetDevice("tr0"); }
+sub hasNetDevice($) { c::hasNetDevice($_[0]) }
-- 
cgit v1.2.1