From a030cfea974447d595cc068ab02657e9536d8ae5 Mon Sep 17 00:00:00 2001
From: Mystery Man <unknown@mandriva.org>
Date: Sun, 16 Mar 2003 15:30:56 +0000
Subject: This commit was manufactured by cvs2svn to create tag 'V9_1_26mdk'.

---
 mdk-stage1/rp-pppoe/scripts/adsl-connect.in        | 278 -----------------
 mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in      |  62 ----
 .../rp-pppoe/scripts/adsl-init-turbolinux.in       |  62 ----
 mdk-stage1/rp-pppoe/scripts/adsl-init.in           |  64 ----
 mdk-stage1/rp-pppoe/scripts/adsl-setup.in          | 346 ---------------------
 mdk-stage1/rp-pppoe/scripts/adsl-start.in          | 186 -----------
 mdk-stage1/rp-pppoe/scripts/adsl-status            |  82 -----
 mdk-stage1/rp-pppoe/scripts/adsl-stop.in           |  84 -----
 8 files changed, 1164 deletions(-)
 delete mode 100755 mdk-stage1/rp-pppoe/scripts/adsl-connect.in
 delete mode 100755 mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
 delete mode 100755 mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
 delete mode 100755 mdk-stage1/rp-pppoe/scripts/adsl-init.in
 delete mode 100755 mdk-stage1/rp-pppoe/scripts/adsl-setup.in
 delete mode 100755 mdk-stage1/rp-pppoe/scripts/adsl-start.in
 delete mode 100755 mdk-stage1/rp-pppoe/scripts/adsl-status
 delete mode 100755 mdk-stage1/rp-pppoe/scripts/adsl-stop.in

(limited to 'mdk-stage1/rp-pppoe/scripts')

diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-connect.in b/mdk-stage1/rp-pppoe/scripts/adsl-connect.in
deleted file mode 100755
index 85dfb3d8d..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-connect.in
+++ /dev/null
@@ -1,278 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-connect
-#
-# Shell script to connect to an ADSL provider using PPPoE
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-connect [config_file]
-#        adsl-connect interface user [config_file]
-# Second form overrides USER and ETH from config file.
-# If config_file is omitted, defaults to /etc//ppp/pppoe.conf
-#
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-localstatedir=/var
-
-# Paths to programs
-IFCONFIG=/sbin/ifconfig
-PPPD=@PPPD@
-SETSID=@SETSID@
-PPPOE=@sbindir@/pppoe
-LOGGER="/usr/bin/logger -t `basename $0`"
-
-# Must be root
-if test "`@ID@ -u`" != 0 ; then
-    echo "$0: You must be root to run this script" >& 2
-    exit 1
-fi
-
-if test "$SETSID" != "" -a ! -x "$SETSID"; then
-    SETSID=""
-fi
-
-CONFIG=/etc//ppp/pppoe.conf
-USER=""
-ETH=""
-
-# Sort out command-line arguments
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-    3)
-	CONFIG="$3"
-	;;
-esac
-
-if test ! -f "$CONFIG" -o ! -r "$CONFIG" ; then
-    echo "$0: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-
-# Check for command-line overriding of ETH and USER
-case "$#" in
-    2|3)
-	ETH="$1"
-	USER="$2"
-	;;
-esac
-
-# Check that config file is sane
-if test "$USER" = "" ; then
-    echo "$0: Check '$CONFIG' -- no setting for USER" >& 2
-    exit 1
-fi
-if test "$ETH" = "" ; then
-    echo "$0: Check '$CONFIG' -- no setting for ETH" >& 2
-    exit 1
-fi
-
-PPPD_PID=0
-
-# Catch common error
-if test "$DEBUG" = "1" ; then
-    echo "*** If you want to use DEBUG, invoke adsl-start, not adsl-connect."
-    exit 1
-fi
-
-if test "$DEBUG" != "" ; then
-    if test "$LINUX_PLUGIN" != "" ; then
-	echo "Cannot use DEBUG mode and LINUX_PLUGIN at the same time."
-	echo "Kernel-mode PPPoE is experimental and unsupported."
-	exit 1
-    fi
-    echo "* The following section identifies your Ethernet interface" >> $DEBUG
-    echo "* and user name.  Some ISP's need 'username'; others" >> $DEBUG
-    echo "* need 'username@isp.com'.  Try both" >> $DEBUG
-    echo "ETH=$ETH; USER=$USER" >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-fi
-
-# MTU of Ethernet card attached to modem MUST be 1500.  This apparently
-# fails on some *BSD's, so we'll only do it under Linux
-
-if test `uname -s` = Linux ; then
-    $IFCONFIG $ETH up mtu 1500
-    # For 2.4 kernels.  Will fail on 2.2.x, but who cares?
-    modprobe ppp_generic > /dev/null 2>&1
-    modprobe ppp_async > /dev/null 2>&1
-    modprobe ppp_synctty > /dev/null 2>&1
-    if test -n "$LINUX_PLUGIN" ; then
-	modprobe pppox > /dev/null 2>&1
-	modprobe pppoe > /dev/null 2>&1
-    fi
-fi
-
-if test "$SYNCHRONOUS" = "yes" ; then
-	PPPOE_SYNC=-s
-	PPPD_SYNC=sync
-	# Increase the chances of it working on Linux...
-	if test `uname -s` = Linux ; then
-	    modprobe n_hdlc > /dev/null 2>&1
-	fi
-else
-	PPPOE_SYNC=""
-	PPPD_SYNC=""
-fi
-
-if test -n "$ACNAME" ; then
-    ACNAME="-C $ACNAME"
-fi
-
-if test -n "$SERVICENAME" ; then
-    SERVICENAME="-S $SERVICENAME"
-fi
-
-if test "$CLAMPMSS" = "no" ; then
-	CLAMPMSS=""
-else
-	CLAMPMSS="-m $CLAMPMSS"
-fi
-
-# If DNSTYPE is SERVER, we must use "usepeerdns" option to pppd.
-if test "$DNSTYPE" = "SERVER" ; then
-	USEPEERDNS=yes
-fi
-
-if test "$USEPEERDNS" = "yes" ; then
-	USEPEERDNS="usepeerdns"
-else
-	USEPEERDNS=""
-fi
-
-# Backward config file compatibility
-if test "$DEMAND" = "" ; then
-	DEMAND=no
-fi
-
-if test "$DEMAND" = "no" ; then
-	DEMAND=""
-else
-	DEMAND="demand persist idle $DEMAND 10.112.112.112:10.112.112.113 ipcp-accept-remote ipcp-accept-local connect true noipdefault ktune"
-fi
-
-case "$FIREWALL" in
-    STANDALONE)
-	. /etc/ppp/firewall-standalone
-	;;
-    MASQUERADE)
-	. /etc/ppp/firewall-masq
-	;;
-esac
-
-# If we're using kernel-mode PPPoE on Linux...
-if test "$LINUX_PLUGIN" != "" ; then
-    PLUGIN_OPTS="plugin $LINUX_PLUGIN $ETH"
-    modprobe pppoe > /dev/null 2>&1
-fi
-
-# Standard PPP options we always use
-PPP_STD_OPTIONS="$PLUGIN_OPTS noipdefault noauth default-asyncmap defaultroute hide-password nodetach $USEPEERDNS local mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp user $USER lcp-echo-interval $LCP_INTERVAL lcp-echo-failure $LCP_FAILURE $PPPD_EXTRA"
-
-# Jigger DNS if required...
-if test "$DNSTYPE" = "SERVER" ; then
-    # Sorry, dude...
-    rm -f /etc/resolv.conf
-    ln -s /etc/ppp/resolv.conf /etc/resolv.conf
-elif test "$DNSTYPE" = "SPECIFY" ; then
-    # Sorry, dude...
-    rm -f /etc/resolv.conf
-    echo "nameserver $DNS1" > /etc/resolv.conf
-    if test -n "$DNS2" ; then
-	echo "nameserver $DNS2" >> /etc/resolv.conf
-    fi
-fi
-
-# PPPoE invocation
-PPPOE_CMD="$PPPOE -p $PPPOE_PIDFILE -I $ETH -T $PPPOE_TIMEOUT -U $PPPOE_SYNC $CLAMPMSS $ACNAME $SERVICENAME $PPPOE_EXTRA"
-if test "$DEBUG" != "" ; then
-    if test "$DEMAND" != "" ; then
-	echo "(Turning off DEMAND for debugging purposes)"
-	DEMAND=""
-    fi
-    echo "* The following section shows the pppd command we will invoke" >> $DEBUG
-    echo "pppd invocation" >> $DEBUG
-    echo "$SETSID $PPPD pty '$PPPOE_CMD' $PPP_STD_OPTIONS $PPPD_SYNC debug" >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-    $SETSID $PPPD pty "$PPPOE_CMD -D $DEBUG-0" \
-	$PPP_STD_OPTIONS \
-	$PPPD_SYNC \
-	debug >> $DEBUG 2>&1
-    echo "---------------------------------------------" >> $DEBUG
-    echo "* The following section is an extract from your log." >> $DEBUG
-    echo "* Look for error messages from pppd, such as" >> $DEBUG
-    echo "* a lack of kernel support for PPP, authentication failure" >> $DEBUG
-    echo "* etc." >> $DEBUG
-    echo "Extract from /var/log/messages" >> $DEBUG
-    grep 'ppp' /var/log/messages | tail -150 >> $DEBUG
-    date >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-    echo "* The following section is a dump of the packets" >> $DEBUG
-    echo "* sent and received by rp-pppoe.  If you don't see" >> $DEBUG
-    echo "* any output, it's an Ethernet driver problem.  If you only" >> $DEBUG
-    echo "* see three PADI packets and nothing else, check your cables" >> $DEBUG
-    echo "* and modem.  Make sure the modem lights flash when you try" >> $DEBUG
-    echo "* to connect.  Check that your Ethernet card is in" >> $DEBUG
-    echo "* half-duplex, 10Mb/s mode.  If all else fails," >> $DEBUG
-    echo "* try using pppoe-sniff." >> $DEBUG
-    echo "rp-pppoe debugging dump" >> $DEBUG
-    cat $DEBUG-0 >> $DEBUG
-    rm -f $DEBUG-0
-    for i in 1 2 3 4 5 6 7 8 9 10 ; do
-    echo ""
-    echo ""
-    echo ""
-    done
-    echo "*** Finished debugging run.  Please review the file"
-    echo "*** '$DEBUG' and try to"
-    echo "*** figure out what is going on."
-    echo "***"
-    echo "*** Unfortunately, we can NO LONGER accept debugging"
-    echo "*** output for analysis.  Please do not send this to"
-    echo "*** Roaring Penguin; it is too time-consuming for"
-    echo "*** us to deal with all the analyses we have been sent."
-    exit 0
-fi
-
-echo $$ > $PIDFILE
-
-while [ true ] ; do
-    if test "$LINUX_PLUGIN" != "" ; then
-	$SETSID $PPPD $PPP_STD_OPTIONS $DEMAND &
-	echo "$!" > $PPPD_PIDFILE
-    else
-	$SETSID $PPPD pty "$PPPOE_CMD" \
-	    $PPP_STD_OPTIONS \
-	    $DEMAND \
-	    $PPPD_SYNC &
-	echo "$!" > $PPPD_PIDFILE
-    fi
-    wait
-
-    # Run /etc/ppp/adsl-lost if it exists
-    test -x /etc/ppp/adsl-lost && /etc/ppp/adsl-lost
-
-    # Re-establish the connection
-    $LOGGER -p daemon.notice \
-        "ADSL connection lost; attempting re-connection."
-
-    # Wait a bit in case a problem causes tons of log messages :-)
-    sleep 5
-done
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in b/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
deleted file mode 100755
index 936f5fba7..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-# Modifed to work with SuSE 6.4 linux by Gary Cameron.
-#
-# Source function library.
-#. /etc/rc.d/init.d/functions  # For red hat?
-. /etc/rc.config               # For SuSE, enables setting from /etc/rc.config
-
-#Tweak this
-restart_time=120
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-
-test "$ADSL_START" = "yes" || exit 0
-
-# The echo return value for success (defined in /etc/rc.config).
-return=$rc_done
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link"
-        $START  > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link"
-        $STOP > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
-        ;;
-
-    restart)
-        $0 stop
-        echo "Waiting" $restart_time "seconds for the host to reset itself"
-        sleep $restart_time  #Note: Need time for host to reset itself
-        $0 start
-        ;;
-
-    status)
-        $STATUS
-        ;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in b/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
deleted file mode 100755
index 3b22f1345..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Source function library if it exists
-test -r /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link: "
-
-	$START
-	if [ $? = 0 ] ; then
-		echo success
-		touch /var/lock/subsys/adsl
-	else
-		echo failure
-	fi
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link: "
-
-	$STOP > /dev/null 2>&1
-	if [ $? = 0 ] ; then
-		echo success
-		rm -f /var/lock/subsys/adsl
-	else
-		echo failure
-	fi
-        ;;
-
-    restart)
-	$0 stop
-	$0 start
-	;;
-
-    status)
-	$STATUS
-	;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init.in b/mdk-stage1/rp-pppoe/scripts/adsl-init.in
deleted file mode 100755
index ab9146fd3..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init.in
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Source function library if it exists
-test -r /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link"
-
-	$START
-	if [ $? = 0 ] ; then
-		touch /var/lock/subsys/adsl
-	        echo_success
-	else
-		echo_failure
-	fi
-        echo ""
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link"
-
-	$STOP > /dev/null 2>&1
-	if [ $? = 0 ] ; then
-		rm -f /var/lock/subsys/adsl
-	        echo_success
-	else
-		echo_failure
-	fi
-        echo ""
-        ;;
-
-    restart)
-	$0 stop
-	$0 start
-	;;
-
-    status)
-	$STATUS
-	;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-setup.in b/mdk-stage1/rp-pppoe/scripts/adsl-setup.in
deleted file mode 100755
index a8c7fa039..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-setup.in
+++ /dev/null
@@ -1,346 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# adsl-setup
-#
-# All-purpose slicing/dicing shell script to configure rp-pppoe.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-IFCONFIG=/sbin/ifconfig
-PPPD=@PPPD@
-PPPOE=@sbindir@/pppoe
-ECHO=@ECHO@
-LOGGER="/usr/bin/logger -t `basename $0`"
-
-CONFIG=/etc/ppp/pppoe.conf
-
-# Protect created files
-umask 077
-
-copy() {
-    cp $1 $2
-    if [ "$?" != 0 ] ; then
-	$ECHO "*** Error copying $1 to $2"
-	$ECHO "*** Quitting."
-	exit 1
-    fi
-}
-
-$ECHO "Welcome to the Roaring Penguin ADSL client setup.  First, I will run"
-$ECHO "some checks on your system to make sure the PPPoE client is installed"
-$ECHO "properly..."
-$ECHO ""
-
-# Must be root
-if [ "`@ID@ -u`" != 0 ] ; then
-    $ECHO "$0: Sorry, you must be root to run this script"
-    exit 1
-fi
-
-# Prototype config file must exist
-if [ ! -r "$CONFIG" ] ; then
-    $ECHO "Oh, dear, I don't see the file '$CONFIG' anywhere.  Please"
-    $ECHO "re-install the PPPoE client."
-    exit 1
-fi
-
-# Must have pppd
-if [ ! -x $PPPD ] ; then
-    $ECHO "Oops, I can't execute the program '$PPPD'.  You"
-    $ECHO "must install the PPP software suite, version 2.3.10 or later."
-    exit 1
-fi
-
-. $CONFIG
-
-if [ "$DEMAND" = "" ] ; then
-    DEMAND=no
-fi
-
-# pppoe must exist
-if [ ! -x "$PPPOE" ] ; then
-    $ECHO "Oh, dear, I can't execute the program '$PPPOE'.  Please"
-    $ECHO "re-install the rp-pppoe client."
-    exit 1
-fi
-
-$ECHO "Looks good!  Now, please enter some information:"
-
-while [ true ] ; do
-    $ECHO ""
-    $ECHO "USER NAME"
-    $ECHO ""
-    $ECHO -n ">>> Enter your PPPoE user name (default $USER): "
-    read U
-
-    if [ "$U" = "" ] ; then
-	U="$USER"
-    fi
-
-    # Under Linux, "fix" the default interface if eth1 is not available
-    if test `uname -s` = "Linux" ; then
-	$IFCONFIG $ETH > /dev/null 2>&1 || ETH=eth0
-    fi
-    $ECHO ""
-    $ECHO "INTERFACE"
-    $ECHO ""
-    $ECHO ">>> Enter the Ethernet interface connected to the ADSL modem"
-    $ECHO "For Solaris, this is likely to be something like /dev/hme0."
-    $ECHO "For Linux, it will be ethn, where 'n' is a number."
-    $ECHO -n "(default $ETH): "
-    read E
-
-    if [ "$E" = "" ] ; then
-	E="$ETH"
-    fi
-
-    $ECHO ""
-    $ECHO "Do you want the link to come up on demand, or stay up continuously?"
-    $ECHO "If you want it to come up on demand, enter the idle time in seconds"
-    $ECHO "after which the link should be dropped.  If you want the link to"
-    $ECHO "stay up permanently, enter 'no' (two letters, lower-case.)"
-    $ECHO "NOTE: Demand-activated links do not interact well with dynamic IP"
-    $ECHO "addresses.  You may have some problems with demand-activated links."
-    $ECHO -n ">>> Enter the demand value (default $DEMAND): "
-    read D
-    if [ "$D" = "" ] ; then
-	D=$DEMAND
-    fi
-
-    $ECHO ""
-    $ECHO "DNS"
-    $ECHO ""
-    $ECHO "Please enter the IP address of your ISP's primary DNS server."
-    $ECHO "If your ISP claims that 'the server will provide DNS addresses',"
-    $ECHO "enter 'server' (all lower-case) here."
-    $ECHO "If you just press enter, I will assume you know what you are"
-    $ECHO "doing and not modify your DNS setup."
-    $ECHO -n ">>> Enter the DNS information here: "
-
-    read DNS1
-
-
-    if [ "$DNS1" != "" ] ; then
-        if [ "$DNS1" != "server" ] ; then
-	    $ECHO "Please enter the IP address of your ISP's secondary DNS server."
-	    $ECHO "If you just press enter, I will assume there is only one DNS server."
-	    $ECHO -n ">>> Enter the secondary DNS server address here: "
-	    read DNS2
-	fi
-    fi
-
-    while [ true ] ; do
-	$ECHO ""
-	$ECHO "PASSWORD"
-	$ECHO ""
-	stty -echo
-	$ECHO -n ">>> Please enter your PPPoE password:    "
-	read PWD1
-	$ECHO ""
-	$ECHO -n ">>> Please re-enter your PPPoE password: "
-	read PWD2
-	$ECHO ""
-	stty echo
-	if [ "$PWD1" = "$PWD2" ] ; then
-	    break
-	fi
-
-	$ECHO -n ">>> Sorry, the passwords do not match.  Try again? (y/n)"
-	read ANS
-	case "$ANS" in
-	    N|No|NO|Non|n|no|non)
-		$ECHO "OK, quitting.  Bye."
-		exit 1
-	esac
-    done
-
-    # Firewalling
-    $ECHO ""
-    $ECHO "FIREWALLING"
-    $ECHO ""
-    if test `uname -s` != "Linux" ; then
-	$ECHO "Sorry, firewalling is only supported under Linux.  Consult"
-	$ECHO "your operating system manuals for details on setting up"
-	$ECHO "packet filters for your system."
-	FIREWALL=NONE
-    else
-	$ECHO "Please choose the firewall rules to use.  Note that these rules are"
-	$ECHO "very basic.  You are strongly encouraged to use a more sophisticated"
-	$ECHO "firewall setup; however, these will provide basic security.  If you"
-	$ECHO "are running any servers on your machine, you must choose 'NONE' and"
-	$ECHO "set up firewalling yourself.  Otherwise, the firewall rules will deny"
-	$ECHO "access to all standard servers like Web, e-mail, ftp, etc.  If you"
-	$ECHO "are using SSH, the rules will block outgoing SSH connections which"
-	$ECHO "allocate a privileged source port."
-	$ECHO ""
-	while [ true ] ; do
-	    $ECHO "The firewall choices are:"
-	    $ECHO "0 - NONE: This script will not set any firewall rules.  You are responsible"
-	    $ECHO "          for ensuring the security of your machine.  You are STRONGLY"
-	    $ECHO "          recommended to use some kind of firewall rules."
-	    $ECHO "1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation"
-	    $ECHO "2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway"
-	    $ECHO "                for a LAN"
-	    $ECHO -n ">>> Choose a type of firewall (0-2): "
-	    read a
-	    if [ "$a" = 0 -o "$a" = 1 -o "$a" = 2 ] ; then
-		break
-	    fi
-	    $ECHO "Please enter a number from 0 to 2"
-	done
-
-	case "$a" in
-	    0)
-		FIREWALL=NONE
-		;;
-	    1)
-		FIREWALL=STANDALONE
-		;;
-	    2)
-		FIREWALL=MASQUERADE
-		;;
-	esac
-    fi
-
-    $ECHO ""
-    $ECHO "** Summary of what you entered **"
-    $ECHO ""
-    $ECHO "Ethernet Interface: $E"
-    $ECHO "User name:          $U"
-    if [ "$D" = "no" ] ; then
-	$ECHO "Activate-on-demand: No"
-    else
-	$ECHO "Activate-on-demand: Yes; idle timeout = $D seconds"
-    fi
-
-    if [ "$DNS1" != "" ] ; then
-        if [ "$DNS1" = "server" ] ; then
-	    $ECHO "DNS addresses:      Supplied by ISP's server"
-        else
-	    $ECHO "Primary DNS:        $DNS1"
-	    if [ "$DNS2" != "" ] ; then
-		$ECHO "Secondary DNS:      $DNS2"
-	    fi
-        fi
-    else
-	$ECHO "DNS:                Do not adjust"
-    fi
-    $ECHO "Firewalling:        $FIREWALL"
-    $ECHO ""
-    while [ true ] ; do
-        $ECHO -n '>>> Accept these settings and adjust configuration files (y/n)? '
-        read ANS
-	case "ANS" in
-	    Y|y|yes|Yes|oui|Oui)
-		ANS=y
-		;;
-            N|n|no|No|non|Non)
-		ANS=n
-		;;
-	esac
-	if [ "$ANS" = "y" -o "$ANS" = "n" ] ; then
-	    break
-        fi
-    done
-    if [ "$ANS" = "y" ] ; then
-	break
-    fi
-done
-
-# Adjust configuration files.  First to $CONFIG
-
-$ECHO "Adjusting $CONFIG"
-
-copy $CONFIG $CONFIG-bak
-if [ "$DNS1" = "server" ] ; then
-    DNSTYPE=SERVER
-    DNS1=""
-    USEPEERDNS=yes
-else
-    USEPEERDNS=no
-    if [ "$DNS1" = "" ] ; then
-	DNSTYPE=NOCHANGE
-    else
-	DNSTYPE=SPECIFY
-    fi
-fi
-
-# Where is pppd likely to put its pid?
-if [ -d /var/run ] ; then
-    VARRUN=/var/run
-else
-    VARRUN=/etc/ppp
-fi
-
-# Some #$(*& ISP's use a slash in the user name...
-sed -e "s&^USER=.*&USER='$U'&" \
-    -e "s&^ETH=.*&ETH='$E'&" \
-    -e "s&^PIDFILE=.*&PIDFILE=\"$VARRUN/\$CF_BASE-adsl.pid\"&" \
-    -e "s/^FIREWALL=.*/FIREWALL=$FIREWALL/" \
-    -e "s/^DEMAND=.*/DEMAND=$D/" \
-    -e "s/^DNSTYPE=.*/DNSTYPE=$DNSTYPE/" \
-    -e "s/^DNS1=.*/DNS1=$DNS1/" \
-    -e "s/^DNS2=.*/DNS2=$DNS2/" \
-    -e "s/^USEPEERDNS=.*/USEPEERDNS=$USEPEERDNS/" \
-    < $CONFIG-bak > $CONFIG
-
-if [ $? != 0 ] ; then
-    $ECHO "** Error modifying $CONFIG"
-    $ECHO "** Quitting"
-    exit 1
-fi
-
-if [ "$DNS1" != "" ] ; then
-    if [ "$DNS1" != "server" ] ; then
-	$ECHO "Adjusting /etc/resolv.conf"
-	if [ -r /etc/resolv.conf ] ; then
-	    grep -s "MADE-BY-RP-PPPOE" /etc/resolv.conf > /dev/null 2>&1
-	    if [ "$?" != 0 ] ; then
-		$ECHO "  (But first backing it up to /etc/resolv.conf-bak)"
-		copy /etc/resolv.conf /etc/resolv.conf-bak
-	    fi
-	fi
-	$ECHO "# MADE-BY-RP-PPPOE" > /etc/resolv.conf
-	$ECHO "nameserver $DNS1" >> /etc/resolv.conf
-	if [ "$DNS2" != "" ] ; then
-	    $ECHO "nameserver $DNS2" >> /etc/resolv.conf
-	fi
-    fi
-fi
-
-$ECHO "Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets"
-if [ -r /etc/ppp/pap-secrets ] ; then
-    $ECHO "  (But first backing it up to /etc/ppp/pap-secrets-bak)"
-    copy /etc/ppp/pap-secrets /etc/ppp/pap-secrets-bak
-else
-    cp /dev/null /etc/ppp/pap-secrets-bak
-fi
-if [ -r /etc/ppp/chap-secrets ] ; then
-    $ECHO "  (But first backing it up to /etc/ppp/chap-secrets-bak)"
-    copy /etc/ppp/chap-secrets /etc/ppp/chap-secrets-bak
-else
-    cp /dev/null /etc/ppp/chap-secrets-bak
-fi
-
-egrep -v "^$U|^\"$U\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets
-$ECHO "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/pap-secrets
-egrep -v "^$U|^\"$U\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets
-$ECHO "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/chap-secrets
-
-$ECHO ""
-$ECHO ""
-$ECHO ""
-$ECHO "Congratulations, it should be all set up!"
-$ECHO ""
-$ECHO "Type 'adsl-start' to bring up your ADSL link and 'adsl-stop' to bring"
-$ECHO "it down.  Type 'adsl-status' to see the link status."
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-start.in b/mdk-stage1/rp-pppoe/scripts/adsl-start.in
deleted file mode 100755
index 33251a851..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-start.in
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-start
-#
-# Shell script to bring up an ADSL connection
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-start [config_file]
-#        adsl-start interface user [config_file]
-# Second form overrides USER and ETH from config file.
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-CONNECT=@sbindir@/adsl-connect
-ECHO=@ECHO@
-IFCONFIG=/sbin/ifconfig
-
-# Defaults
-CONFIG=/etc/ppp/pppoe.conf
-USER=""
-ETH=""
-ME=`basename $0`
-# Must be root
-if [ "`@ID@ -u`" != 0 ] ; then
-    $ECHO "$ME: You must be root to run this script" >& 2
-    exit 1
-fi
-
-# Debugging
-if [ "$DEBUG" = "1" ] ; then
-    $ECHO "*** Running in debug mode... please be patient..."
-    DEBUG=/tmp/pppoe-debug-$$
-    export DEBUG
-    mkdir $DEBUG
-    if [ "$?" != 0 ] ; then
-	$ECHO "Could not create directory $DEBUG... exiting"
-	exit 1
-    fi
-    DEBUG=$DEBUG/pppoe-debug.txt
-
-    # Initial debug output
-    $ECHO "---------------------------------------------" > $DEBUG
-    $ECHO "* The following section contains information about your system" >> $DEBUG
-    date >> $DEBUG
-    $ECHO "Output of uname -a" >> $DEBUG
-    uname -a >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "* The following section contains information about your network" >> $DEBUG
-    $ECHO "* interfaces.  The one you chose for PPPoE should contain the words:" >> $DEBUG
-    $ECHO "* 'UP' and 'RUNNING'.  If it does not, you probably have an Ethernet" >> $DEBUG
-    $ECHO "* driver problem." >> $DEBUG
-    $ECHO "Output of ifconfig -a" >> $DEBUG
-    $IFCONFIG -a >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    if [ "`uname -s`" = "Linux" ] ; then
-        $ECHO "* The following section contains information about kernel modules" >> $DEBUG
-	$ECHO "* If the module for your Ethernet card is 'tulip', you might" >> $DEBUG
-	$ECHO "* want to look for an updated version at http://www.scyld.com" >> $DEBUG
-	$ECHO "Output of lsmod" >> $DEBUG
-	lsmod >> $DEBUG
-	$ECHO "---------------------------------------------" >> $DEBUG
-    fi
-    $ECHO "* The following section lists your routing table." >> $DEBUG
-    $ECHO "* If you have an entry which starts with '0.0.0.0', you probably" >> $DEBUG
-    $ECHO "* have defined a default route and gateway, and pppd will" >> $DEBUG
-    $ECHO "* not create a default route using your ISP.  Try getting" >> $DEBUG
-    $ECHO "* rid of this route." >> $DEBUG
-    $ECHO "Output of netstat -n -r" >> $DEBUG
-    netstat -n -r >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "Contents of /etc/resolv.conf" >> $DEBUG
-    $ECHO "* The following section lists DNS setup." >> $DEBUG
-    $ECHO "* If you can browse by IP address, but not name, suspect" >> $DEBUG
-    $ECHO "* a DNS problem." >> $DEBUG
-    cat /etc/resolv.conf >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "* The following section lists /etc/ppp/options." >> $DEBUG
-    $ECHO "* You should have NOTHING in that file." >> $DEBUG
-    $ECHO "Contents of /etc/ppp/options" >> $DEBUG
-    cat /etc/ppp/options >> $DEBUG 2>/dev/null
-    $ECHO "---------------------------------------------" >> $DEBUG
-else
-    DEBUG=""
-fi
-
-# Sort out command-line arguments
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-    3)
-	CONFIG="$3"
-	;;
-esac
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    $ECHO "$ME: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-# Check for command-line overriding of ETH and USER
-case "$#" in
-    2|3)
-	ETH="$1"
-	USER="$2"
-	;;
-esac
-
-# Check for pidfile
-if [ -r "$PIDFILE" ] ; then
-    PID=`cat "$PIDFILE"`
-    # Check if still running
-    kill -0 $PID > /dev/null 2>&1
-    if [ $? = 0 ] ; then
-	$ECHO "$ME: There already seems to be an ADSL connection up (PID $PID)" >& 2
-	exit 1
-    fi
-    # Delete bogus PIDFILE
-    rm -f "$PIDFILE" "$PIDFILE.pppd" "$PIDFILE.pppoe" "$PIDFILE.start"
-fi
-
-echo $$ > $PIDFILE.start
-
-# Start the connection in the background unless we're debugging
-if [ "$DEBUG" != "" ] ; then
-    $CONNECT "$@"
-    exit 0
-fi
-
-$CONNECT "$@" > /dev/null 2>&1 &
-CONNECT_PID=$!
-
-if [ "$CONNECT_TIMEOUT" = "" -o "$CONNECT_TIMEOUT" = 0 ] ; then
-    exit 0
-fi
-
-# Don't monitor connection if dial-on-demand
-if [ "$DEMAND" != "" -a "$DEMAND" != "no" ] ; then
-    exit 0
-fi
-
-# Monitor connection
-TIME=0
-while [ true ] ; do
-    @sbindir@/adsl-status $CONFIG > /dev/null 2>&1
-
-    # Looks like the interface came up
-    if [ $? = 0 ] ; then
-	# Print newline if standard input is a TTY
-	tty -s && $ECHO " Connected!"
-	exit 0
-    fi
-
-    if test -n "$FORCEPING" ; then
-	$ECHO -n "$FORCEPING"
-    else
-	tty -s && $ECHO -n "$PING"
-    fi
-    sleep $CONNECT_POLL
-    TIME=`expr $TIME + $CONNECT_POLL`
-    if [ $TIME -gt $CONNECT_TIMEOUT ] ; then
-	break
-    fi
-done
-
-$ECHO "TIMED OUT" >& 2
-# Timed out!  Kill the adsl-connect process and quit
-kill $CONNECT_PID > /dev/null 2>&1
-exit 1
-
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-status b/mdk-stage1/rp-pppoe/scripts/adsl-status
deleted file mode 100755
index 18b100ab2..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-status
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# adsl-status
-#
-# Shell script to report on status of ADSL connection
-#
-# Copyright (C) 2000-2001 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-status [config_file]
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-# Defaults
-CONFIG=/etc/ppp/pppoe.conf
-
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-esac
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    echo "$0: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-
-if [ "$DEMAND" != "no" ] ; then
-    echo "Note: You have enabled demand-connection; adsl-status may be inaccurate."
-fi
-
-# If no PPPOE_PIDFILE, connection is down, unless we're using the Linux plugin
-if [ "$LINUX_PLUGIN" = "" ] ; then
-    if [ ! -r "$PPPOE_PIDFILE" ] ; then
-	echo "adsl-status: Link is down (can't read pppoe PID file $PPPOE_PIDFILE)"
-	exit 1
-    fi
-fi
-
-# If no PPPD_PIDFILE, something fishy!
-if [ ! -r "$PPPD_PIDFILE" ] ; then
-    echo "adsl-status: Link is down (can't read pppd PID file $PPPD_PIDFILE)"
-    exit 1
-fi
-
-PPPD_PID=`cat "$PPPD_PIDFILE"`
-
-# Sigh.  Some versions of pppd put PID files in /var/run; others put them
-# in /etc/ppp.  Since it's too messy to figure out what pppd does, we
-# try both locations.
-for i in /etc/ppp/ppp*.pid /var/run/ppp*.pid ; do
-    if [ -r $i ] ; then
-	PID=`cat $i`
-	if [ "$PID" = "$PPPD_PID" ] ; then
-	    IF=`basename $i .pid`
-	    netstat -rn | grep " ${IF}\$" > /dev/null
-	    # /sbin/ifconfig $IF | grep "UP.*POINTOPOINT" > /dev/null
-	    if [ "$?" != "0" ] ; then
-		echo "adsl-status: Link is attached to $IF, but $IF is down"
-		exit 1
-	    fi
-	    echo "adsl-status: Link is up and running on interface $IF"
-	    /sbin/ifconfig $IF
-	    exit 0
-	fi
-    fi
-done
-
-echo "adsl-status: Link is down -- could not find interface corresponding to"
-echo "pppd pid $PPPD_PID"
-exit 1
\ No newline at end of file
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-stop.in b/mdk-stage1/rp-pppoe/scripts/adsl-stop.in
deleted file mode 100755
index af0867573..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-stop.in
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-stop
-#
-# Shell script to bring down an ADSL connection
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-stop [config_file]
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-ME="`basename $0`"
-LOGGER="/usr/bin/logger -t $ME"
-CONFIG="$1"
-if [ "$CONFIG" = "" ] ; then
-    CONFIG=/etc/ppp/pppoe.conf
-fi
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    echo "$ME: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-STARTPID="$PIDFILE.start"
-
-# Backward config file compatibility
-if test "$DEMAND" = "" ; then
-	DEMAND=no
-fi
-
-# Ignore SIGTERM
-trap "" 15
-
-# Check for pidfile
-if [ -r "$PIDFILE" ] ; then
-    PID=`cat $PIDFILE`
-
-    # Check if still running
-    kill -0 $PID > /dev/null 2>&1
-    if [ $? != 0 ] ; then
-	echo "$ME: The adsl-connect script (PID $PID) appears to have died" >& 2
-    fi
-
-    # Kill pppd, which should in turn kill pppoe
-    if [ -r "$PPPD_PIDFILE" ] ; then
-	PPPD_PID=`cat "$PPPD_PIDFILE"`
-	$LOGGER -p daemon.notice "Killing pppd"
-	echo "Killing pppd ($PPPD_PID)"
-	kill $PPPD_PID > /dev/null 2>&1 || exit 1
-    fi
-
-    # Kill adsl-start
-    PIDS=`cat $STARTPID`
-    kill -0 $PIDS > /dev/null 2>&1
-    if [ $? = 0 ] ; then
-	$LOGGER -p daemon.notice "Killing adsl-connect"
-	kill $PIDS > /dev/null 2>&1
-    fi
-
-    # Kill adsl-connect
-    $LOGGER -p daemon.notice "Killing adsl-connect"
-    echo "Killing adsl-connect ($PID)"
-    kill $PID > /dev/null 2>&1
-
-    rm -f "$PIDFILE" "$PPPD_PIDFILE" "$PPPOE_PIDFILE" "$STARTPID"
-else
-    echo "$ME: No ADSL connection appears to be running" >&2
-    exit 1
-fi
-
-exit 0
-- 
cgit v1.2.1