From 0a121a8ecd6de894c14d60daf9da2022ec47405c Mon Sep 17 00:00:00 2001 From: Guillaume Cottenceau Date: Mon, 11 Jun 2001 13:49:39 +0000 Subject: Initial revision --- mdk-stage1/rp-pppoe/configs/pppoe.conf | 126 +++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) create mode 100644 mdk-stage1/rp-pppoe/configs/pppoe.conf (limited to 'mdk-stage1/rp-pppoe/configs/pppoe.conf') diff --git a/mdk-stage1/rp-pppoe/configs/pppoe.conf b/mdk-stage1/rp-pppoe/configs/pppoe.conf new file mode 100644 index 000000000..9f77b913c --- /dev/null +++ b/mdk-stage1/rp-pppoe/configs/pppoe.conf @@ -0,0 +1,126 @@ +#*********************************************************************** +# +# pppoe.conf +# +# Configuration file for rp-pppoe. Edit as appropriate and install in +# /etc/ppp/pppoe.conf +# +# NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and +# adsl-status shell scripts. It is *not* used in any way by the +# "pppoe" executable. +# +# Copyright (C) 2000 Roaring Penguin Software Inc. +# +# This file may be distributed under the terms of the GNU General +# Public License. +# +# $Id$ +#*********************************************************************** + +# When you configure a variable, DO NOT leave spaces around the "=" sign. + +# Ethernet card connected to ADSL modem +ETH=eth1 + +# ADSL user name. You may have to supply "@provider.com" Sympatico +# users in Canada do need to include "@sympatico.ca" +# Sympatico uses PAP authentication. Make sure /etc/ppp/pap-secrets +# contains the right username/password combination. +# For Magma, use xxyyzz@magma.ca +USER=bxxxnxnx@sympatico.ca + +# Bring link up on demand? Default is to leave link up all the time. +# If you want the link to come up on demand, set DEMAND to a number indicating +# the idle time after which the link is brought down. +DEMAND=no +#DEMAND=300 + +# DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2; +# NOCHANGE=do not adjust. +DNSTYPE=SERVER + +# Obtain DNS server addresses from the peer (recent versions of pppd only) +USEPEERDNS=yes + +DNS1= +DNS2= + +### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT + +# How long adsl-start waits for a new PPP interface to appear before +# concluding something went wrong. If you use 0, then adsl-start +# exits immediately with a successful status and does not wait for the +# link to come up. Time is in seconds. +# +# WARNING WARNING WARNING: +# +# If you are using rp-pppoe on a physically-inaccessible host, set +# CONNECT_TIMEOUT to 0. This makes SURE that the machine keeps trying +# to connect forever after adsl-start is called. Otherwise, it will +# give out after CONNECT_TIMEOUT seconds and will not attempt to +# connect again, making it impossible to reach. +CONNECT_TIMEOUT=30 + +# How often in seconds adsl-start polls to check if link is up +CONNECT_POLL=2 + +# Specific desired AC Name +ACNAME= + +# Specific desired service name +SERVICENAME= + +# Character to echo at each poll. Use PING="" if you don't want +# anything echoed +PING="." + +# File where the adsl-connect script writes its process-ID. +# Three files are actually used: +# $PIDFILE contains PID of adsl-connect script +# $PIDFILE.pppoe contains PID of pppoe process +# $PIDFILE.pppd contains PID of pppd process +CF_BASE=`basename $CONFIG` +PIDFILE="/var/run/$CF_BASE-adsl.pid" + +# Do you want to use synchronous PPP? "yes" or "no". "yes" is much +# easier on CPU usage, but may not work for you. It is safer to use +# "no", but you may want to experiment with "yes". "yes" is generally +# safe on Linux machines with the n_hdlc line discipline; unsafe on others. +SYNCHRONOUS=no + +# Do you want to clamp the MSS? Here's how to decide: +# - If you have only a SINGLE computer connected to the ADSL modem, choose +# "no". +# - If you have a computer acting as a gateway for a LAN, choose "1412". +# The setting of 1412 is safe for either setup, but uses slightly more +# CPU power. +CLAMPMSS=1412 +#CLAMPMSS=no + +# LCP echo interval and failure count. +LCP_INTERVAL=20 +LCP_FAILURE=3 + +# PPPOE_TIMEOUT should be about 4*LCP_INTERVAL +PPPOE_TIMEOUT=80 + +# Firewalling: One of NONE, STANDALONE or MASQUERADE +FIREWALL=NONE + +# Linux kernel-mode plugin for pppd. If you want to try the kernel-mode +# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so +LINUX_PLUGIN= + +# Any extra arguments to pass to pppoe. Normally, use a blank string +# like this: +PPPOE_EXTRA="" + +# Rumour has it that "Citizen's Communications" with a 3Com +# HomeConnect ADSL Modem DualLink requires these extra options: +# PPPOE_EXTRA="-f 3c12:3c13 -S ISP" + +# Any extra arguments to pass to pppd. Normally, use a blank string +# like this: +PPPD_EXTRA="" + + -- cgit v1.2.1