From 4093b2d83713aa2c17ae96ed65950aedb3081057 Mon Sep 17 00:00:00 2001 From: Mystery Man Date: Fri, 23 Aug 2002 15:52:19 +0000 Subject: This commit was manufactured by cvs2svn to create branch 'gdk-pixbuf-0-branch'. --- mdk-stage1/ppp/chat/Makefile.linux | 27 - mdk-stage1/ppp/chat/Makefile.linux.makeopt | 27 - mdk-stage1/ppp/chat/Makefile.sol2 | 19 - mdk-stage1/ppp/chat/Makefile.sunos4 | 19 - mdk-stage1/ppp/chat/chat.8 | 515 -------- mdk-stage1/ppp/chat/chat.c | 1756 ---------------------------- 6 files changed, 2363 deletions(-) delete mode 100644 mdk-stage1/ppp/chat/Makefile.linux delete mode 100644 mdk-stage1/ppp/chat/Makefile.linux.makeopt delete mode 100644 mdk-stage1/ppp/chat/Makefile.sol2 delete mode 100644 mdk-stage1/ppp/chat/Makefile.sunos4 delete mode 100644 mdk-stage1/ppp/chat/chat.8 delete mode 100644 mdk-stage1/ppp/chat/chat.c (limited to 'mdk-stage1/ppp/chat') diff --git a/mdk-stage1/ppp/chat/Makefile.linux b/mdk-stage1/ppp/chat/Makefile.linux deleted file mode 100644 index 586cbd876..000000000 --- a/mdk-stage1/ppp/chat/Makefile.linux +++ /dev/null @@ -1,27 +0,0 @@ -# $Id$ - -CDEF1= -DTERMIOS # Use the termios structure -CDEF2= -DSIGTYPE=void # Standard definition -CDEF3= -UNO_SLEEP # Use the usleep function -CDEF4= -DFNDELAY=O_NDELAY # Old name value -CDEFS= $(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4) - -CFLAGS= $(RPM_OPT_FLAGS) $(CDEFS) - -INSTALL= install - -all: chat - -chat: chat.o - $(CC) -o chat chat.o - -chat.o: chat.c - $(CC) -c $(CFLAGS) -o chat.o chat.c - -install: chat - mkdir -p $(BINDIR) - $(INSTALL) -s -c chat $(BINDIR) - $(INSTALL) -c -m 644 chat.8 $(MANDIR)/man8 - -clean: - rm -f chat.o chat *~ diff --git a/mdk-stage1/ppp/chat/Makefile.linux.makeopt b/mdk-stage1/ppp/chat/Makefile.linux.makeopt deleted file mode 100644 index 974680a93..000000000 --- a/mdk-stage1/ppp/chat/Makefile.linux.makeopt +++ /dev/null @@ -1,27 +0,0 @@ -# $Id$ - -CDEF1= -DTERMIOS # Use the termios structure -CDEF2= -DSIGTYPE=void # Standard definition -CDEF3= -UNO_SLEEP # Use the usleep function -CDEF4= -DFNDELAY=O_NDELAY # Old name value -CDEFS= $(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4) - -CFLAGS= -O2 -g -pipe $(CDEFS) - -INSTALL= install - -all: chat - -chat: chat.o - $(CC) -o chat chat.o - -chat.o: chat.c - $(CC) -c $(CFLAGS) -o chat.o chat.c - -install: chat - mkdir -p $(BINDIR) - $(INSTALL) -s -c chat $(BINDIR) - $(INSTALL) -c -m 644 chat.8 $(MANDIR)/man8 - -clean: - rm -f chat.o chat *~ diff --git a/mdk-stage1/ppp/chat/Makefile.sol2 b/mdk-stage1/ppp/chat/Makefile.sol2 deleted file mode 100644 index f566cc68b..000000000 --- a/mdk-stage1/ppp/chat/Makefile.sol2 +++ /dev/null @@ -1,19 +0,0 @@ -# -# Makefile for chat on Solaris 2 -# - -include ../solaris/Makedefs - -CFLAGS = $(COPTS) -DNO_USLEEP -DSOL2 - -all: chat - -chat: chat.o - $(CC) -o chat chat.o - -install: chat - $(INSTALL) -f $(BINDIR) chat - $(INSTALL) -m 444 -f $(MANDIR)/man8 chat.8 - -clean: - rm -f *~ *.o chat diff --git a/mdk-stage1/ppp/chat/Makefile.sunos4 b/mdk-stage1/ppp/chat/Makefile.sunos4 deleted file mode 100644 index b3507360e..000000000 --- a/mdk-stage1/ppp/chat/Makefile.sunos4 +++ /dev/null @@ -1,19 +0,0 @@ -# -# Makefile for chat on suns -# - -include ../sunos4/Makedefs - -CFLAGS = -DSUNOS $(COPTS) - -all: chat - -chat: chat.o - $(CC) -o chat chat.o - -install: chat - $(INSTALL) -c chat $(BINDIR)/chat - $(INSTALL) -c -m 444 chat.8 $(MANDIR)/man8/chat.8 - -clean: - rm -f *~ *.o chat diff --git a/mdk-stage1/ppp/chat/chat.8 b/mdk-stage1/ppp/chat/chat.8 deleted file mode 100644 index 8d2029609..000000000 --- a/mdk-stage1/ppp/chat/chat.8 +++ /dev/null @@ -1,515 +0,0 @@ -.\" -*- nroff -*- -.\" manual page [] for chat 1.8 -.\" $Id$ -.\" SH section heading -.\" SS subsection heading -.\" LP paragraph -.\" IP indented paragraph -.\" TP hanging label -.TH CHAT 8 "22 May 1999" "Chat Version 1.22" -.SH NAME -chat \- Automated conversational script with a modem -.SH SYNOPSIS -.B chat -[ -.I options -] -.I script -.SH DESCRIPTION -.LP -The \fIchat\fR program defines a conversational exchange between the -computer and the modem. Its primary purpose is to establish the -connection between the Point-to-Point Protocol Daemon (\fIpppd\fR) and -the remote's \fIpppd\fR process. -.SH OPTIONS -.TP -.B -f \fI -Read the chat script from the chat \fIfile\fR. The use of this option -is mutually exclusive with the chat script parameters. The user must -have read access to the file. Multiple lines are permitted in the -file. Space or horizontal tab characters should be used to separate -the strings. -.TP -.B -t \fI -Set the timeout for the expected string to be received. If the string -is not received within the time limit then the reply string is not -sent. An alternate reply may be sent or the script will fail if there -is no alternate reply string. A failed script will cause the -\fIchat\fR program to terminate with a non-zero error code. -.TP -.B -r \fI -Set the file for output of the report strings. If you use the keyword -\fIREPORT\fR, the resulting strings are written to this file. If this -option is not used and you still use \fIREPORT\fR keywords, the -\fIstderr\fR file is used for the report strings. -.TP -.B -e -Start with the echo option turned on. Echoing may also be turned on -or off at specific points in the chat script by using the \fIECHO\fR -keyword. When echoing is enabled, all output from the modem is echoed -to \fIstderr\fR. -.TP -.B -E -Enables environment variable substituion within chat scripts using the -standard \fI$xxx\fR syntax. -.TP -.B -v -Request that the \fIchat\fR script be executed in a verbose mode. The -\fIchat\fR program will then log the execution state of the chat -script as well as all text received from the modem and the output -strings sent to the modem. The default is to log through the SYSLOG; -the logging method may be altered with the -S and -s flags. -.TP -.B -V -Request that the \fIchat\fR script be executed in a stderr verbose -mode. The \fIchat\fR program will then log all text received from the -modem and the output strings sent to the modem to the stderr device. This -device is usually the local console at the station running the chat or -pppd program. -.TP -.B -s -Use stderr. All log messages from '-v' and all error messages will be -sent to stderr. -.TP -.B -S -Do not use the SYSLOG. By default, error messages are sent to the -SYSLOG. The use of -S will prevent both log messages from '-v' and -error messages from being sent to the SYSLOG. -.TP -.B -T \fI -Pass in an arbitary string, usually a phone number, that will be -substituted for the \\T substitution metacharacter in a send string. -.TP -.B -U \fI -Pass in a second string, usually a phone number, that will be -substituted for the \\U substitution metacharacter in a send string. -This is useful when dialing an ISDN terminal adapter that requires two -numbers. -.TP -.B script -If the script is not specified in a file with the \fI-f\fR option then -the script is included as parameters to the \fIchat\fR program. -.SH CHAT SCRIPT -.LP -The \fIchat\fR script defines the communications. -.LP -A script consists of one or more "expect-send" pairs of strings, -separated by spaces, with an optional "subexpect-subsend" string pair, -separated by a dash as in the following example: -.IP -ogin:-BREAK-ogin: ppp ssword: hello2u2 -.LP -This line indicates that the \fIchat\fR program should expect the string -"ogin:". If it fails to receive a login prompt within the time interval -allotted, it is to send a break sequence to the remote and then expect the -string "ogin:". If the first "ogin:" is received then the break sequence is -not generated. -.LP -Once it received the login prompt the \fIchat\fR program will send the -string ppp and then expect the prompt "ssword:". When it receives the -prompt for the password, it will send the password hello2u2. -.LP -A carriage return is normally sent following the reply string. It is not -expected in the "expect" string unless it is specifically requested by using -the \\r character sequence. -.LP -The expect sequence should contain only what is needed to identify the -string. Since it is normally stored on a disk file, it should not contain -variable information. It is generally not acceptable to look for time -strings, network identification strings, or other variable pieces of data as -an expect string. -.LP -To help correct for characters which may be corrupted during the initial -sequence, look for the string "ogin:" rather than "login:". It is possible -that the leading "l" character may be received in error and you may never -find the string even though it was sent by the system. For this reason, -scripts look for "ogin:" rather than "login:" and "ssword:" rather than -"password:". -.LP -A very simple script might look like this: -.IP -ogin: ppp ssword: hello2u2 -.LP -In other words, expect ....ogin:, send ppp, expect ...ssword:, send hello2u2. -.LP -In actual practice, simple scripts are rare. At the vary least, you -should include sub-expect sequences should the original string not be -received. For example, consider the following script: -.IP -ogin:--ogin: ppp ssword: hello2u2 -.LP -This would be a better script than the simple one used earlier. This would look -for the same login: prompt, however, if one was not received, a single -return sequence is sent and then it will look for login: again. Should line -noise obscure the first login prompt then sending the empty line will -usually generate a login prompt again. -.SH COMMENTS -Comments can be embedded in the chat script. A comment is a line which -starts with the \fB#\fR (hash) character in column 1. Such comment -lines are just ignored by the chat program. If a '#' character is to -be expected as the first character of the expect sequence, you should -quote the expect string. -If you want to wait for a prompt that starts with a # (hash) -character, you would have to write something like this: -.IP -# Now wait for the prompt and send logout string -.br -\'# ' logout -.LP - -.SH SENDING DATA FROM A FILE -If the string to send starts with an at sign (@), the rest of the -string is taken to be the name of a file to read to get the string to -send. If the last character of the data read is a newline, it is -removed. The file can be a named pipe (or fifo) instead of a regular -file. This provides a way for \fBchat\fR to communicate with another -program, for example, a program to prompt the user and receive a -password typed in. -.LP - -.SH ABORT STRINGS -Many modems will report the status of the call as a string. These -strings may be \fBCONNECTED\fR or \fBNO CARRIER\fR or \fBBUSY\fR. It -is often desirable to terminate the script should the modem fail to -connect to the remote. The difficulty is that a script would not know -exactly which modem string it may receive. On one attempt, it may -receive \fBBUSY\fR while the next time it may receive \fBNO CARRIER\fR. -.LP -These "abort" strings may be specified in the script using the \fIABORT\fR -sequence. It is written in the script as in the following example: -.IP -ABORT BUSY ABORT 'NO CARRIER' '' ATZ OK ATDT5551212 CONNECT -.LP -This sequence will expect nothing; and then send the string ATZ. The -expected response to this is the string \fIOK\fR. When it receives \fIOK\fR, -the string ATDT5551212 to dial the telephone. The expected string is -\fICONNECT\fR. If the string \fICONNECT\fR is received the remainder of the -script is executed. However, should the modem find a busy telephone, it will -send the string \fIBUSY\fR. This will cause the string to match the abort -character sequence. The script will then fail because it found a match to -the abort string. If it received the string \fINO CARRIER\fR, it will abort -for the same reason. Either string may be received. Either string will -terminate the \fIchat\fR script. -.SH CLR_ABORT STRINGS -This sequence allows for clearing previously set \fBABORT\fR strings. -\fBABORT\fR strings are kept in an array of a pre-determined size (at -compilation time); \fBCLR_ABORT\fR will reclaim the space for cleared -entries so that new strings can use that space. -.SH SAY STRINGS -The \fBSAY\fR directive allows the script to send strings to the user -at the terminal via standard error. If \fBchat\fR is being run by -pppd, and pppd is running as a daemon (detached from its controlling -terminal), standard error will normally be redirected to the file -/etc/ppp/connect-errors. -.LP -\fBSAY\fR strings must be enclosed in single or double quotes. If -carriage return and line feed are needed in the string to be output, -you must explicitely add them to your string. -.LP -The SAY strings could be used to give progress messages in sections of -the script where you want to have 'ECHO OFF' but still let the user -know what is happening. An example is: -.IP -ABORT BUSY -.br -ECHO OFF -.br -SAY "Dialling your ISP...\\n" -.br -\'' ATDT5551212 -.br -TIMEOUT 120 -.br -SAY "Waiting up to 2 minutes for connection ... " -.br -CONNECT '' -.br -SAY "Connected, now logging in ...\n" -.br -ogin: account -.br -ssword: pass -.br -$ \c -SAY "Logged in OK ...\n" -\fIetc ...\fR -.LP -This sequence will only present the SAY strings to the user and all -the details of the script will remain hidden. For example, if the -above script works, the user will see: -.IP -Dialling your ISP... -.br -Waiting up to 2 minutes for connection ... Connected, now logging in ... -.br -Logged in OK ... -.LP - -.SH REPORT STRINGS -A \fBreport\fR string is similar to the ABORT string. The difference -is that the strings, and all characters to the next control character -such as a carriage return, are written to the report file. -.LP -The report strings may be used to isolate the transmission rate of the -modem's connect string and return the value to the chat user. The -analysis of the report string logic occurs in conjunction with the -other string processing such as looking for the expect string. The use -of the same string for a report and abort sequence is probably not -very useful, however, it is possible. -.LP -The report strings to no change the completion code of the program. -.LP -These "report" strings may be specified in the script using the \fIREPORT\fR -sequence. It is written in the script as in the following example: -.IP -REPORT CONNECT ABORT BUSY '' ATDT5551212 CONNECT '' ogin: account -.LP -This sequence will expect nothing; and then send the string -ATDT5551212 to dial the telephone. The expected string is -\fICONNECT\fR. If the string \fICONNECT\fR is received the remainder -of the script is executed. In addition the program will write to the -expect-file the string "CONNECT" plus any characters which follow it -such as the connection rate. -.SH CLR_REPORT STRINGS -This sequence allows for clearing previously set \fBREPORT\fR strings. -\fBREPORT\fR strings are kept in an array of a pre-determined size (at -compilation time); \fBCLR_REPORT\fR will reclaim the space for cleared -entries so that new strings can use that space. -.SH ECHO -The echo options controls whether the output from the modem is echoed -to \fIstderr\fR. This option may be set with the \fI-e\fR option, but -it can also be controlled by the \fIECHO\fR keyword. The "expect-send" -pair \fIECHO\fR \fION\fR enables echoing, and \fIECHO\fR \fIOFF\fR -disables it. With this keyword you can select which parts of the -conversation should be visible. For instance, with the following -script: -.IP -ABORT 'BUSY' -.br -ABORT 'NO CARRIER' -.br -'' ATZ -.br -OK\\r\\n ATD1234567 -.br -\\r\\n \\c -.br -ECHO ON -.br -CONNECT \\c -.br -ogin: account -.LP -all output resulting from modem configuration and dialing is not visible, -but starting with the \fICONNECT\fR (or \fIBUSY\fR) message, everything -will be echoed. -.SH HANGUP -The HANGUP options control whether a modem hangup should be considered -as an error or not. This option is useful in scripts for dialling -systems which will hang up and call your system back. The HANGUP -options can be \fBON\fR or \fBOFF\fR. -.br -When HANGUP is set OFF and the modem hangs up (e.g., after the first -stage of logging in to a callback system), \fBchat\fR will continue -running the script (e.g., waiting for the incoming call and second -stage login prompt). As soon as the incoming call is connected, you -should use the \fBHANGUP ON\fR directive to reinstall normal hang up -signal behavior. Here is an (simple) example script: -.IP -ABORT 'BUSY' -.br -'' ATZ -.br -OK\\r\\n ATD1234567 -.br -\\r\\n \\c -.br -CONNECT \\c -.br -\'Callback login:' call_back_ID -.br -HANGUP OFF -.br -ABORT "Bad Login" -.br -\'Callback Password:' Call_back_password -.br -TIMEOUT 120 -.br -CONNECT \\c -.br -HANGUP ON -.br -ABORT "NO CARRIER" -.br -ogin:--BREAK--ogin: real_account -.br -\fIetc ...\fR -.LP -.SH TIMEOUT -The initial timeout value is 45 seconds. This may be changed using the \fB-t\fR -parameter. -.LP -To change the timeout value for the next expect string, the following -example may be used: -.IP -ATZ OK ATDT5551212 CONNECT TIMEOUT 10 ogin:--ogin: TIMEOUT 5 assword: hello2u2 -.LP -This will change the timeout to 10 seconds when it expects the login: -prompt. The timeout is then changed to 5 seconds when it looks for the -password prompt. -.LP -The timeout, once changed, remains in effect until it is changed again. -.SH SENDING EOT -The special reply string of \fIEOT\fR indicates that the chat program -should send an EOT character to the remote. This is normally the -End-of-file character sequence. A return character is not sent -following the EOT. -.PR -The EOT sequence may be embedded into the send string using the -sequence \fI^D\fR. -.SH GENERATING BREAK -The special reply string of \fIBREAK\fR will cause a break condition -to be sent. The break is a special signal on the transmitter. The -normal processing on the receiver is to change the transmission rate. -It may be used to cycle through the available transmission rates on -the remote until you are able to receive a valid login prompt. -.PR -The break sequence may be embedded into the send string using the -\fI\\K\fR sequence. -.SH ESCAPE SEQUENCES -The expect and reply strings may contain escape sequences. All of the -sequences are legal in the reply string. Many are legal in the expect. -Those which are not valid in the expect sequence are so indicated. -.TP -.B '' -Expects or sends a null string. If you send a null string then it will still -send the return character. This sequence may either be a pair of apostrophe -or quote characters. -.TP -.B \\\\b -represents a backspace character. -.TP -.B \\\\c -Suppresses the newline at the end of the reply string. This is the only -method to send a string without a trailing return character. It must -be at the end of the send string. For example, -the sequence hello\\c will simply send the characters h, e, l, l, o. -.I (not valid in expect.) -.TP -.B \\\\d -Delay for one second. The program uses sleep(1) which will delay to a -maximum of one second. -.I (not valid in expect.) -.TP -.B \\\\K -Insert a BREAK -.I (not valid in expect.) -.TP -.B \\\\n -Send a newline or linefeed character. -.TP -.B \\\\N -Send a null character. The same sequence may be represented by \\0. -.I (not valid in expect.) -.TP -.B \\\\p -Pause for a fraction of a second. The delay is 1/10th of a second. -.I (not valid in expect.) -.TP -.B \\\\q -Suppress writing the string to the SYSLOG file. The string ?????? is -written to the log in its place. -.I (not valid in expect.) -.TP -.B \\\\r -Send or expect a carriage return. -.TP -.B \\\\s -Represents a space character in the string. This may be used when it -is not desirable to quote the strings which contains spaces. The -sequence 'HI TIM' and HI\\sTIM are the same. -.TP -.B \\\\t -Send or expect a tab character. -.TP -.B \\\\T -Send the phone number string as specified with the \fI-T\fR option -.I (not valid in expect.) -.TP -.B \\\\U -Send the phone number 2 string as specified with the \fI-U\fR option -.I (not valid in expect.) -.TP -.B \\\\\\\\ -Send or expect a backslash character. -.TP -.B \\\\ddd -Collapse the octal digits (ddd) into a single ASCII character and send that -character. -.I (some characters are not valid in expect.) -.TP -.B \^^C -Substitute the sequence with the control character represented by C. -For example, the character DC1 (17) is shown as \^^Q. -.I (some characters are not valid in expect.) -.SH ENVIRONMENT VARIABLES -Environment variables are available within chat scripts, if the \fI-E\fR -option was specified in the command line. The metacharacter \fI$\fR is used -to introduce the name of the environment variable to substitute. If the -substition fails, because the requested environment variable is not set, -\fInothing\fR is replaced for the variable. -.SH TERMINATION CODES -The \fIchat\fR program will terminate with the following completion -codes. -.TP -.B 0 -The normal termination of the program. This indicates that the script -was executed without error to the normal conclusion. -.TP -.B 1 -One or more of the parameters are invalid or an expect string was too -large for the internal buffers. This indicates that the program as not -properly executed. -.TP -.B 2 -An error occurred during the execution of the program. This may be due -to a read or write operation failing for some reason or chat receiving -a signal such as SIGINT. -.TP -.B 3 -A timeout event occurred when there was an \fIexpect\fR string without -having a "-subsend" string. This may mean that you did not program the -script correctly for the condition or that some unexpected event has -occurred and the expected string could not be found. -.TP -.B 4 -The first string marked as an \fIABORT\fR condition occurred. -.TP -.B 5 -The second string marked as an \fIABORT\fR condition occurred. -.TP -.B 6 -The third string marked as an \fIABORT\fR condition occurred. -.TP -.B 7 -The fourth string marked as an \fIABORT\fR condition occurred. -.TP -.B ... -The other termination codes are also strings marked as an \fIABORT\fR -condition. -.LP -Using the termination code, it is possible to determine which event -terminated the script. It is possible to decide if the string "BUSY" -was received from the modem as opposed to "NO DIAL TONE". While the -first event may be retried, the second will probably have little -chance of succeeding during a retry. -.SH SEE ALSO -Additional information about \fIchat\fR scripts may be found with UUCP -documentation. The \fIchat\fR script was taken from the ideas proposed -by the scripts used by the \fIuucico\fR program. -.LP -uucico(1), uucp(1) -.SH COPYRIGHT -The \fIchat\fR program is in public domain. This is not the GNU public -license. If it breaks then you get to keep both pieces. diff --git a/mdk-stage1/ppp/chat/chat.c b/mdk-stage1/ppp/chat/chat.c deleted file mode 100644 index 1b22907a8..000000000 --- a/mdk-stage1/ppp/chat/chat.c +++ /dev/null @@ -1,1756 +0,0 @@ -/* - * Chat -- a program for automatic session establishment (i.e. dial - * the phone and log in). - * - * Standard termination codes: - * 0 - successful completion of the script - * 1 - invalid argument, expect string too large, etc. - * 2 - error on an I/O operation or fatal error condition. - * 3 - timeout waiting for a simple string. - * 4 - the first string declared as "ABORT" - * 5 - the second string declared as "ABORT" - * 6 - ... and so on for successive ABORT strings. - * - * This software is in the public domain. - * - * ----------------- - * 22-May-99 added environment substitutuion, enabled with -E switch. - * Andreas Arens . - * - * 12-May-99 added a feature to read data to be sent from a file, - * if the send string starts with @. Idea from gpk . - * - * added -T and -U option and \T and \U substitution to pass a phone - * number into chat script. Two are needed for some ISDN TA applications. - * Keith Dart - * - * - * Added SAY keyword to send output to stderr. - * This allows to turn ECHO OFF and to output specific, user selected, - * text to give progress messages. This best works when stderr - * exists (i.e.: pppd in nodetach mode). - * - * Added HANGUP directives to allow for us to be called - * back. When HANGUP is set to NO, chat will not hangup at HUP signal. - * We rely on timeouts in that case. - * - * Added CLR_ABORT to clear previously set ABORT string. This has been - * dictated by the HANGUP above as "NO CARRIER" (for example) must be - * an ABORT condition until we know the other host is going to close - * the connection for call back. As soon as we have completed the - * first stage of the call back sequence, "NO CARRIER" is a valid, non - * fatal string. As soon as we got called back (probably get "CONNECT"), - * we should re-arm the ABORT "NO CARRIER". Hence the CLR_ABORT command. - * Note that CLR_ABORT packs the abort_strings[] array so that we do not - * have unused entries not being reclaimed. - * - * In the same vein as above, added CLR_REPORT keyword. - * - * Allow for comments. Line starting with '#' are comments and are - * ignored. If a '#' is to be expected as the first character, the - * expect string must be quoted. - * - * - * Francis Demierre - * Thu May 15 17:15:40 MET DST 1997 - * - * - * Added -r "report file" switch & REPORT keyword. - * Robert Geer - * - * Added -s "use stderr" and -S "don't use syslog" switches. - * June 18, 1997 - * Karl O. Pinc - * - * - * Added -e "echo" switch & ECHO keyword - * Dick Streefland - * - * - * Considerable updates and modifications by - * Al Longyear - * Paul Mackerras - * - * - * The original author is: - * - * Karl Fox - * Morning Star Technologies, Inc. - * 1760 Zollinger Road - * Columbus, OH 43221 - * (614)451-1883 - * - */ - -#ifndef __STDC__ -#define const -#endif - -#ifndef lint -static const char rcsid[] = "$Id$"; -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifndef TERMIO -#undef TERMIOS -#define TERMIOS -#endif - -#ifdef TERMIO -#include -#endif -#ifdef TERMIOS -#include -#endif - -#define STR_LEN 1024 - -#ifndef SIGTYPE -#define SIGTYPE void -#endif - -#undef __P -#undef __V - -#ifdef __STDC__ -#include -#define __V(x) x -#define __P(x) x -#else -#include -#define __V(x) (va_alist) va_dcl -#define __P(x) () -#define const -#endif - -#ifndef O_NONBLOCK -#define O_NONBLOCK O_NDELAY -#endif - -#ifdef SUNOS -extern int sys_nerr; -extern char *sys_errlist[]; -#define memmove(to, from, n) bcopy(from, to, n) -#define strerror(n) ((unsigned)(n) < sys_nerr? sys_errlist[(n)] :\ - "unknown error") -#endif - -/*************** Micro getopt() *********************************************/ -#define OPTION(c,v) (_O&2&&**v?*(*v)++:!c||_O&4?0:(!(_O&1)&& \ - (--c,++v),_O=4,c&&**v=='-'&&v[0][1]?*++*v=='-'\ - &&!v[0][1]?(--c,++v,0):(_O=2,*(*v)++):0)) -#define OPTARG(c,v) (_O&2?**v||(++v,--c)?(_O=1,--c,*v++): \ - (_O=4,(char*)0):(char*)0) -#define OPTONLYARG(c,v) (_O&2&&**v?(_O=1,--c,*v++):(char*)0) -#define ARG(c,v) (c?(--c,*v++):(char*)0) - -static int _O = 0; /* Internal state */ -/*************** Micro getopt() *********************************************/ - -char *program_name; - -#define MAX_ABORTS 50 -#define MAX_REPORTS 50 -#define DEFAULT_CHAT_TIMEOUT 45 - -int echo = 0; -int verbose = 0; -int to_log = 1; -int to_stderr = 0; -int Verbose = 0; -int quiet = 0; -int report = 0; -int use_env = 0; -int exit_code = 0; -FILE* report_fp = (FILE *) 0; -char *report_file = (char *) 0; -char *chat_file = (char *) 0; -char *phone_num = (char *) 0; -char *phone_num2 = (char *) 0; -int timeout = DEFAULT_CHAT_TIMEOUT; - -int have_tty_parameters = 0; - -#ifdef TERMIO -#define term_parms struct termio -#define get_term_param(param) ioctl(0, TCGETA, param) -#define set_term_param(param) ioctl(0, TCSETA, param) -struct termio saved_tty_parameters; -#endif - -#ifdef TERMIOS -#define term_parms struct termios -#define get_term_param(param) tcgetattr(0, param) -#define set_term_param(param) tcsetattr(0, TCSANOW, param) -struct termios saved_tty_parameters; -#endif - -char *abort_string[MAX_ABORTS], *fail_reason = (char *)0, - fail_buffer[50]; -int n_aborts = 0, abort_next = 0, timeout_next = 0, echo_next = 0; -int clear_abort_next = 0; - -char *report_string[MAX_REPORTS] ; -char report_buffer[50] ; -int n_reports = 0, report_next = 0, report_gathering = 0 ; -int clear_report_next = 0; - -int say_next = 0, hup_next = 0; - -void *dup_mem __P((void *b, size_t c)); -void *copy_of __P((char *s)); -void usage __P((void)); -void logf __P((const char *fmt, ...)); -void fatal __P((int code, const char *fmt, ...)); -SIGTYPE sigalrm __P((int signo)); -SIGTYPE sigint __P((int signo)); -SIGTYPE sigterm __P((int signo)); -SIGTYPE sighup __P((int signo)); -void unalarm __P((void)); -void init __P((void)); -void set_tty_parameters __P((void)); -void echo_stderr __P((int)); -void break_sequence __P((void)); -void terminate __P((int status)); -void do_file __P((char *chat_file)); -int get_string __P((register char *string)); -int put_string __P((register char *s)); -int write_char __P((int c)); -int put_char __P((int c)); -int get_char __P((void)); -void chat_send __P((register char *s)); -char *character __P((int c)); -void chat_expect __P((register char *s)); -char *clean __P((register char *s, int sending)); -void break_sequence __P((void)); -void terminate __P((int status)); -void pack_array __P((char **array, int end)); -char *expect_strtok __P((char *, char *)); -int vfmtmsg __P((char *, int, const char *, va_list)); /* vsprintf++ */ - -int main __P((int, char *[])); - -void *dup_mem(b, c) -void *b; -size_t c; -{ - void *ans = malloc (c); - if (!ans) - fatal(2, "memory error!"); - - memcpy (ans, b, c); - return ans; -} - -void *copy_of (s) -char *s; -{ - return dup_mem (s, strlen (s) + 1); -} - -/* - * chat [ -v ] [ -E ] [ -T number ] [ -U number ] [ -t timeout ] [ -f chat-file ] \ - * [ -r report-file ] \ - * [...[[expect[-say[-expect...]] say expect[-say[-expect]] ...]]] - * - * Perform a UUCP-dialer-like chat script on stdin and stdout. - */ -int -main(argc, argv) - int argc; - char **argv; -{ - int option; - char *arg; - - program_name = *argv; - tzset(); - - while ((option = OPTION(argc, argv)) != 0) { - switch (option) { - case 'e': - ++echo; - break; - - case 'E': - ++use_env; - break; - - case 'v': - ++verbose; - break; - - case 'V': - ++Verbose; - break; - - case 's': - ++to_stderr; - break; - - case 'S': - to_log = 0; - break; - - case 'f': - if ((arg = OPTARG(argc, argv)) != NULL) - chat_file = copy_of(arg); - else - usage(); - break; - - case 't': - if ((arg = OPTARG(argc, argv)) != NULL) - timeout = atoi(arg); - else - usage(); - break; - - case 'r': - arg = OPTARG (argc, argv); - if (arg) { - if (report_fp != NULL) - fclose (report_fp); - report_file = copy_of (arg); - report_fp = fopen (report_file, "a"); - if (report_fp != NULL) { - if (verbose) - fprintf (report_fp, "Opening \"%s\"...\n", - report_file); - report = 1; - } - } - break; - - case 'T': - if ((arg = OPTARG(argc, argv)) != NULL) - phone_num = copy_of(arg); - else - usage(); - break; - - case 'U': - if ((arg = OPTARG(argc, argv)) != NULL) - phone_num2 = copy_of(arg); - else - usage(); - break; - - default: - usage(); - break; - } - } -/* - * Default the report file to the stderr location - */ - if (report_fp == NULL) - report_fp = stderr; - - if (to_log) { -#ifdef ultrix - openlog("chat", LOG_PID); -#else - openlog("chat", LOG_PID | LOG_NDELAY, LOG_LOCAL2); - - if (verbose) - setlogmask(LOG_UPTO(LOG_INFO)); - else - setlogmask(LOG_UPTO(LOG_WARNING)); -#endif - } - - init(); - - if (chat_file != NULL) { - arg = ARG(argc, argv); - if (arg != NULL) - usage(); - else - do_file (chat_file); - } else { - while ((arg = ARG(argc, argv)) != NULL) { - chat_expect(arg); - - if ((arg = ARG(argc, argv)) != NULL) - chat_send(arg); - } - } - - terminate(0); - return 0; -} - -/* - * Process a chat script when read from a file. - */ - -void do_file (chat_file) -char *chat_file; -{ - int linect, sendflg; - char *sp, *arg, quote; - char buf [STR_LEN]; - FILE *cfp; - - cfp = fopen (chat_file, "r"); - if (cfp == NULL) - fatal(1, "%s -- open failed: %m", chat_file); - - linect = 0; - sendflg = 0; - - while (fgets(buf, STR_LEN, cfp) != NULL) { - sp = strchr (buf, '\n'); - if (sp) - *sp = '\0'; - - linect++; - sp = buf; - - /* lines starting with '#' are comments. If a real '#' - is to be expected, it should be quoted .... */ - if ( *sp == '#' ) - continue; - - while (*sp != '\0') { - if (*sp == ' ' || *sp == '\t') { - ++sp; - continue; - } - - if (*sp == '"' || *sp == '\'') { - quote = *sp++; - arg = sp; - while (*sp != quote) { - if (*sp == '\0') - fatal(1, "unterminated quote (line %d)", linect); - - if (*sp++ == '\\') { - if (*sp != '\0') - ++sp; - } - } - } - else { - arg = sp; - while (*sp != '\0' && *sp != ' ' && *sp != '\t') - ++sp; - } - - if (*sp != '\0') - *sp++ = '\0'; - - if (sendflg) - chat_send (arg); - else - chat_expect (arg); - sendflg = !sendflg; - } - } - fclose (cfp); -} - -/* - * We got an error parsing the command line. - */ -void usage() -{ - fprintf(stderr, "\ -Usage: %s [-e] [-E] [-v] [-V] [-t timeout] [-r report-file]\n\ - [-T phone-number] [-U phone-number2] {-f chat-file | chat-script}\n", program_name); - exit(1); -} - -char line[1024]; - -/* - * Send a message to syslog and/or stderr. - */ -void logf __V((const char *fmt, ...)) -{ - va_list args; - -#ifdef __STDC__ - va_start(args, fmt); -#else - char *fmt; - va_start(args); - fmt = va_arg(args, char *); -#endif - - vfmtmsg(line, sizeof(line), fmt, args); - if (to_log) - syslog(LOG_INFO, "%s", line); - if (to_stderr) - fprintf(stderr, "%s\n", line); -} - -/* - * Print an error message and terminate. - */ - -void fatal __V((int code, const char *fmt, ...)) -{ - va_list args; - -#ifdef __STDC__ - va_start(args, fmt); -#else - int code; - char *fmt; - va_start(args); - code = va_arg(args, int); - fmt = va_arg(args, char *); -#endif - - vfmtmsg(line, sizeof(line), fmt, args); - if (to_log) - syslog(LOG_ERR, "%s", line); - if (to_stderr) - fprintf(stderr, "%s\n", line); - terminate(code); -} - -int alarmed = 0; - -SIGTYPE sigalrm(signo) -int signo; -{ - int flags; - - alarm(1); - alarmed = 1; /* Reset alarm to avoid race window */ - signal(SIGALRM, sigalrm); /* that can cause hanging in read() */ - - if ((flags = fcntl(0, F_GETFL, 0)) == -1) - fatal(2, "Can't get file mode flags on stdin: %m"); - - if (fcntl(0, F_SETFL, flags | O_NONBLOCK) == -1) - fatal(2, "Can't set file mode flags on stdin: %m"); - - if (verbose) - logf("alarm"); -} - -void unalarm() -{ - int flags; - - if ((flags = fcntl(0, F_GETFL, 0)) == -1) - fatal(2, "Can't get file mode flags on stdin: %m"); - - if (fcntl(0, F_SETFL, flags & ~O_NONBLOCK) == -1) - fatal(2, "Can't set file mode flags on stdin: %m"); -} - -SIGTYPE sigint(signo) -int signo; -{ - fatal(2, "SIGINT"); -} - -SIGTYPE sigterm(signo) -int signo; -{ - fatal(2, "SIGTERM"); -} - -SIGTYPE sighup(signo) -int signo; -{ - fatal(2, "SIGHUP"); -} - -void init() -{ - signal(SIGINT, sigint); - signal(SIGTERM, sigterm); - signal(SIGHUP, sighup); - - set_tty_parameters(); - signal(SIGALRM, sigalrm); - alarm(0); - alarmed = 0; -} - -void set_tty_parameters() -{ -#if defined(get_term_param) - term_parms t; - - if (get_term_param (&t) < 0) - fatal(2, "Can't get terminal parameters: %m"); - - saved_tty_parameters = t; - have_tty_parameters = 1; - - t.c_iflag |= IGNBRK | ISTRIP | IGNPAR; - t.c_oflag = 0; - t.c_lflag = 0; - t.c_cc[VERASE] = - t.c_cc[VKILL] = 0; - t.c_cc[VMIN] = 1; - t.c_cc[VTIME] = 0; - - if (set_term_param (&t) < 0) - fatal(2, "Can't set terminal parameters: %m"); -#endif -} - -void break_sequence() -{ -#ifdef TERMIOS - tcsendbreak (0, 0); -#endif -} - -void terminate(status) -int status; -{ - static int terminating = 0; - - if (terminating) - exit(status); - terminating = 1; - echo_stderr(-1); -/* - * Allow the last of the report string to be gathered before we terminate. - */ - if (report_gathering) { - int c, rep_len; - - rep_len = strlen(report_buffer); - while (rep_len + 1 <= sizeof(report_buffer)) { - alarm(1); - c = get_char(); - alarm(0); - if (c < 0 || iscntrl(c)) - break; - report_buffer[rep_len] = c; - ++rep_len; - } - report_buffer[rep_len] = 0; - fprintf (report_fp, "chat: %s\n", report_buffer); - } - if (report_file != (char *) 0 && report_fp != (FILE *) NULL) { - if (verbose) - fprintf (report_fp, "Closing \"%s\".\n", report_file); - fclose (report_fp); - report_fp = (FILE *) NULL; - } - -#if defined(get_term_param) - if (have_tty_parameters) { - if (set_term_param (&saved_tty_parameters) < 0) - fatal(2, "Can't restore terminal parameters: %m"); - } -#endif - - exit(status); -} - -/* - * 'Clean up' this string. - */ -char *clean(s, sending) -register char *s; -int sending; /* set to 1 when sending (putting) this string. */ -{ - char temp[STR_LEN], env_str[STR_LEN], cur_chr; - register char *s1, *phchar; - int add_return = sending; -#define isoctal(chr) (((chr) >= '0') && ((chr) <= '7')) -#define isalnumx(chr) ((((chr) >= '0') && ((chr) <= '9')) \ - || (((chr) >= 'a') && ((chr) <= 'z')) \ - || (((chr) >= 'A') && ((chr) <= 'Z')) \ - || (chr) == '_') - - s1 = temp; - while (*s) { - cur_chr = *s++; - if (cur_chr == '^') { - cur_chr = *s++; - if (cur_chr == '\0') { - *s1++ = '^'; - break; - } - cur_chr &= 0x1F; - if (cur_chr != 0) { - *s1++ = cur_chr; - } - continue; - } - - if (use_env && cur_chr == '$') { /* ARI */ - phchar = env_str; - while (isalnumx(*s)) - *phchar++ = *s++; - *phchar = '\0'; - phchar = getenv(env_str); - if (phchar) - while (*phchar) - *s1++ = *phchar++; - continue; - } - - if (cur_chr != '\\') { - *s1++ = cur_chr; - continue; - } - - cur_chr = *s++; - if (cur_chr == '\0') { - if (sending) { - *s1++ = '\\'; - *s1++ = '\\'; - } - break; - } - - switch (cur_chr) { - case 'b': - *s1++ = '\b'; - break; - - case 'c': - if (sending && *s == '\0') - add_return = 0; - else - *s1++ = cur_chr; - break; - - case '\\': - case 'K': - case 'p': - case 'd': - if (sending) - *s1++ = '\\'; - *s1++ = cur_chr; - break; - - case 'T': - if (sending && phone_num) { - for (phchar = phone_num; *phchar != '\0'; phchar++) - *s1++ = *phchar; - } - else { - *s1++ = '\\'; - *s1++ = 'T'; - } - break; - - case 'U': - if (sending && phone_num2) { - for (phchar = phone_num2; *phchar != '\0'; phchar++) - *s1++ = *phchar; - } - else { - *s1++ = '\\'; - *s1++ = 'U'; - } - break; - - case 'q': - quiet = 1; - break; - - case 'r': - *s1++ = '\r'; - break; - - case 'n': - *s1++ = '\n'; - break; - - case 's': - *s1++ = ' '; - break; - - case 't': - *s1++ = '\t'; - break; - - case 'N': - if (sending) { - *s1++ = '\\'; - *s1++ = '\0'; - } - else - *s1++ = 'N'; - break; - - case '$': /* ARI */ - if (use_env) { - *s1++ = cur_chr; - break; - } - /* FALL THROUGH */ - - default: - if (isoctal (cur_chr)) { - cur_chr &= 0x07; - if (isoctal (*s)) { - cur_chr <<= 3; - cur_chr |= *s++ - '0'; - if (isoctal (*s)) { - cur_chr <<= 3; - cur_chr |= *s++ - '0'; - } - } - - if (cur_chr != 0 || sending) { - if (sending && (cur_chr == '\\' || cur_chr == 0)) - *s1++ = '\\'; - *s1++ = cur_chr; - } - break; - } - - if (sending) - *s1++ = '\\'; - *s1++ = cur_chr; - break; - } - } - - if (add_return) - *s1++ = '\r'; - - *s1++ = '\0'; /* guarantee closure */ - *s1++ = '\0'; /* terminate the string */ - return dup_mem (temp, (size_t) (s1 - temp)); /* may have embedded nuls */ -} - -/* - * A modified version of 'strtok'. This version skips \ sequences. - */ - -char *expect_strtok (s, term) - char *s, *term; -{ - static char *str = ""; - int escape_flag = 0; - char *result; - -/* - * If a string was specified then do initial processing. - */ - if (s) - str = s; - -/* - * If this is the escape flag then reset it and ignore the character. - */ - if (*str) - result = str; - else - result = (char *) 0; - - while (*str) { - if (escape_flag) { - escape_flag = 0; - ++str; - continue; - } - - if (*str == '\\') { - ++str; - escape_flag = 1; - continue; - } - -/* - * If this is not in the termination string, continue. - */ - if (strchr (term, *str) == (char *) 0) { - ++str; - continue; - } - -/* - * This is the terminator. Mark the end of the string and stop. - */ - *str++ = '\0'; - break; - } - return (result); -} - -/* - * Process the expect string - */ - -void chat_expect (s) -char *s; -{ - char *expect; - char *reply; - - if (strcmp(s, "HANGUP") == 0) { - ++hup_next; - return; - } - - if (strcmp(s, "ABORT") == 0) { - ++abort_next; - return; - } - - if (strcmp(s, "CLR_ABORT") == 0) { - ++clear_abort_next; - return; - } - - if (strcmp(s, "REPORT") == 0) { - ++report_next; - return; - } - - if (strcmp(s, "CLR_REPORT") == 0) { - ++clear_report_next; - return; - } - - if (strcmp(s, "TIMEOUT") == 0) { - ++timeout_next; - return; - } - - if (strcmp(s, "ECHO") == 0) { - ++echo_next; - return; - } - - if (strcmp(s, "SAY") == 0) { - ++say_next; - return; - } - -/* - * Fetch the expect and reply string. - */ - for (;;) { - expect = expect_strtok (s, "-"); - s = (char *) 0; - - if (expect == (char *) 0) - return; - - reply = expect_strtok (s, "-"); - -/* - * Handle the expect string. If successful then exit. - */ - if (get_string (expect)) - return; - -/* - * If there is a sub-reply string then send it. Otherwise any condition - * is terminal. - */ - if (reply == (char *) 0 || exit_code != 3) - break; - - chat_send (reply); - } - -/* - * The expectation did not occur. This is terminal. - */ - if (fail_reason) - logf("Failed (%s)", fail_reason); - else - logf("Failed"); - terminate(exit_code); -} - -/* - * Translate the input character to the appropriate string for printing - * the data. - */ - -char *character(c) -int c; -{ - static char string[10]; - char *meta; - - meta = (c & 0x80) ? "M-" : ""; - c &= 0x7F; - - if (c < 32) - sprintf(string, "%s^%c", meta, (int)c + '@'); - else if (c == 127) - sprintf(string, "%s^?", meta); - else - sprintf(string, "%s%c", meta, c); - - return (string); -} - -/* - * process the reply string - */ -void chat_send (s) -register char *s; -{ - char file_data[STR_LEN]; - - if (say_next) { - say_next = 0; - s = clean(s, 1); - write(2, s, strlen(s)); - free(s); - return; - } - - if (hup_next) { - hup_next = 0; - if (strcmp(s, "OFF") == 0) - signal(SIGHUP, SIG_IGN); - else - signal(SIGHUP, sighup); - return; - } - - if (echo_next) { - echo_next = 0; - echo = (strcmp(s, "ON") == 0); - return; - } - - if (abort_next) { - char *s1; - - abort_next = 0; - - if (n_aborts >= MAX_ABORTS) - fatal(2, "Too many ABORT strings"); - - s1 = clean(s, 0); - - if (strlen(s1) > strlen(s) - || strlen(s1) + 1 > sizeof(fail_buffer)) - fatal(1, "Illegal or too-long ABORT string ('%v')", s); - - abort_string[n_aborts++] = s1; - - if (verbose) - logf("abort on (%v)", s); - return; - } - - if (clear_abort_next) { - char *s1; - int i; - int old_max; - int pack = 0; - - clear_abort_next = 0; - - s1 = clean(s, 0); - - if (strlen(s1) > strlen(s) - || strlen(s1) + 1 > sizeof(fail_buffer)) - fatal(1, "Illegal or too-long CLR_ABORT string ('%v')", s); - - old_max = n_aborts; - for (i=0; i < n_aborts; i++) { - if ( strcmp(s1,abort_string[i]) == 0 ) { - free(abort_string[i]); - abort_string[i] = NULL; - pack++; - n_aborts--; - if (verbose) - logf("clear abort on (%v)", s); - } - } - free(s1); - if (pack) - pack_array(abort_string,old_max); - return; - } - - if (report_next) { - char *s1; - - report_next = 0; - if (n_reports >= MAX_REPORTS) - fatal(2, "Too many REPORT strings"); - - s1 = clean(s, 0); - - if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1) - fatal(1, "Illegal or too-long REPORT string ('%v')", s); - - report_string[n_reports++] = s1; - - if (verbose) - logf("report (%v)", s); - return; - } - - if (clear_report_next) { - char *s1; - int i; - int old_max; - int pack = 0; - - clear_report_next = 0; - - s1 = clean(s, 0); - - if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1) - fatal(1, "Illegal or too-long REPORT string ('%v')", s); - - old_max = n_reports; - for (i=0; i < n_reports; i++) { - if ( strcmp(s1,report_string[i]) == 0 ) { - free(report_string[i]); - report_string[i] = NULL; - pack++; - n_reports--; - if (verbose) - logf("clear report (%v)", s); - } - } - free(s1); - if (pack) - pack_array(report_string,old_max); - - return; - } - - if (timeout_next) { - timeout_next = 0; - timeout = atoi(s); - - if (timeout <= 0) - timeout = DEFAULT_CHAT_TIMEOUT; - - if (verbose) - logf("timeout set to %d seconds", timeout); - - return; - } - - /* - * The syntax @filename means read the string to send from the - * file `filename'. - */ - if (s[0] == '@') { - /* skip the @ and any following white-space */ - char *fn = s; - while (*++fn == ' ' || *fn == '\t') - ; - - if (*fn != 0) { - FILE *f; - int n = 0; - - /* open the file and read until STR_LEN-1 bytes or end-of-file */ - f = fopen(fn, "r"); - if (f == NULL) - fatal(1, "%s -- open failed: %m", fn); - while (n < STR_LEN - 1) { - int nr = fread(&file_data[n], 1, STR_LEN - 1 - n, f); - if (nr < 0) - fatal(1, "%s -- read error", fn); - if (nr == 0) - break; - n += nr; - } - fclose(f); - - /* use the string we got as the string to send, - but trim off the final newline if any. */ - if (n > 0 && file_data[n-1] == '\n') - --n; - file_data[n] = 0; - s = file_data; - } - } - - if (strcmp(s, "EOT") == 0) - s = "^D\\c"; - else if (strcmp(s, "BREAK") == 0) - s = "\\K\\c"; - - if (!put_string(s)) - fatal(1, "Failed"); -} - -int get_char() -{ - int status; - char c; - - status = read(0, &c, 1); - - switch (status) { - case 1: - return ((int)c & 0x7F); - - default: - logf("warning: read() on stdin returned %d", status); - - case -1: - if ((status = fcntl(0, F_GETFL, 0)) == -1) - fatal(2, "Can't get file mode flags on stdin: %m"); - - if (fcntl(0, F_SETFL, status & ~O_NONBLOCK) == -1) - fatal(2, "Can't set file mode flags on stdin: %m"); - - return (-1); - } -} - -int put_char(c) -int c; -{ - int status; - char ch = c; - - usleep(10000); /* inter-character typing delay (?) */ - - status = write(1, &ch, 1); - - switch (status) { - case 1: - return (0); - - default: - logf("warning: write() on stdout returned %d", status); - - case -1: - if ((status = fcntl(0, F_GETFL, 0)) == -1) - fatal(2, "Can't get file mode flags on stdin, %m"); - - if (fcntl(0, F_SETFL, status & ~O_NONBLOCK) == -1) - fatal(2, "Can't set file mode flags on stdin: %m"); - - return (-1); - } -} - -int write_char (c) -int c; -{ - if (alarmed || put_char(c) < 0) { - alarm(0); - alarmed = 0; - - if (verbose) { - if (errno == EINTR || errno == EWOULDBLOCK) - logf(" -- write timed out"); - else - logf(" -- write failed: %m"); - } - return (0); - } - return (1); -} - -int put_string (s) -register char *s; -{ - quiet = 0; - s = clean(s, 1); - - if (verbose) { - if (quiet) - logf("send (??????)"); - else - logf("send (%v)", s); - } - - alarm(timeout); alarmed = 0; - - while (*s) { - register char c = *s++; - - if (c != '\\') { - if (!write_char (c)) - return 0; - continue; - } - - c = *s++; - switch (c) { - case 'd': - sleep(1); - break; - - case 'K': - break_sequence(); - break; - - case 'p': - usleep(10000); /* 1/100th of a second (arg is microseconds) */ - break; - - default: - if (!write_char (c)) - return 0; - break; - } - } - - alarm(0); - alarmed = 0; - return (1); -} - -/* - * Echo a character to stderr. - * When called with -1, a '\n' character is generated when - * the cursor is not at the beginning of a line. - */ -void echo_stderr(n) -int n; -{ - static int need_lf; - char *s; - - switch (n) { - case '\r': /* ignore '\r' */ - break; - case -1: - if (need_lf == 0) - break; - /* fall through */ - case '\n': - write(2, "\n", 1); - need_lf = 0; - break; - default: - s = character(n); - write(2, s, strlen(s)); - need_lf = 1; - break; - } -} - -/* - * 'Wait for' this string to appear on this file descriptor. - */ -int get_string(string) -register char *string; -{ - char temp[STR_LEN]; - int c, printed = 0, len, minlen; - register char *s = temp, *end = s + STR_LEN; - char *logged = temp; - - fail_reason = (char *)0; - string = clean(string, 0); - len = strlen(string); - minlen = (len > sizeof(fail_buffer)? len: sizeof(fail_buffer)) - 1; - - if (verbose) - logf("expect (%v)", string); - - if (len > STR_LEN) { - logf("expect string is too long"); - exit_code = 1; - return 0; - } - - if (len == 0) { - if (verbose) - logf("got it"); - return (1); - } - - alarm(timeout); - alarmed = 0; - - while ( ! alarmed && (c = get_char()) >= 0) { - int n, abort_len, report_len; - - if (echo) - echo_stderr(c); - if (verbose && c == '\n') { - if (s == logged) - logf(""); /* blank line */ - else - logf("%0.*v", s - logged, logged); - logged = s + 1; - } - - *s++ = c; - - if (verbose && s >= logged + 80) { - logf("%0.*v", s - logged, logged); - logged = s; - } - - if (Verbose) { - if (c == '\n') - fputc( '\n', stderr ); - else if (c != '\r') - fprintf( stderr, "%s", character(c) ); - } - - if (!report_gathering) { - for (n = 0; n < n_reports; ++n) { - if ((report_string[n] != (char*) NULL) && - s - temp >= (report_len = strlen(report_string[n])) && - strncmp(s - report_len, report_string[n], report_len) == 0) { - time_t time_now = time ((time_t*) NULL); - struct tm* tm_now = localtime (&time_now); - - strftime (report_buffer, 20, "%b %d %H:%M:%S ", tm_now); - strcat (report_buffer, report_string[n]); - - report_string[n] = (char *) NULL; - report_gathering = 1; - break; - } - } - } - else { - if (!iscntrl (c)) { - int rep_len = strlen (report_buffer); - report_buffer[rep_len] = c; - report_buffer[rep_len + 1] = '\0'; - } - else { - report_gathering = 0; - fprintf (report_fp, "chat: %s\n", report_buffer); - } - } - - if (s - temp >= len && - c == string[len - 1] && - strncmp(s - len, string, len) == 0) { - if (verbose) { - if (s > logged) - logf("%0.*v", s - logged, logged); - logf(" -- got it\n"); - } - - alarm(0); - alarmed = 0; - return (1); - } - - for (n = 0; n < n_aborts; ++n) { - if (s - temp >= (abort_len = strlen(abort_string[n])) && - strncmp(s - abort_len, abort_string[n], abort_len) == 0) { - if (verbose) { - if (s > logged) - logf("%0.*v", s - logged, logged); - logf(" -- failed"); - } - - alarm(0); - alarmed = 0; - exit_code = n + 4; - strcpy(fail_reason = fail_buffer, abort_string[n]); - return (0); - } - } - - if (s >= end) { - if (logged < s - minlen) { - if (verbose) - logf("%0.*v", s - logged, logged); - logged = s; - } - s -= minlen; - memmove(temp, s, minlen); - logged = temp + (logged - s); - s = temp + minlen; - } - - if (alarmed && verbose) - logf("warning: alarm synchronization problem"); - } - - alarm(0); - - if (verbose && printed) { - if (alarmed) - logf(" -- read timed out"); - else - logf(" -- read failed: %m"); - } - - exit_code = 3; - alarmed = 0; - return (0); -} - -/* - * Gross kludge to handle Solaris versions >= 2.6 having usleep. - */ -#ifdef SOL2 -#include -#if MAXUID > 65536 /* then this is Solaris 2.6 or later */ -#undef NO_USLEEP -#endif -#endif /* SOL2 */ - -#ifdef NO_USLEEP -#include -#include - -/* - usleep -- support routine for 4.2BSD system call emulations - last edit: 29-Oct-1984 D A Gwyn - */ - -extern int select(); - -int -usleep( usec ) /* returns 0 if ok, else -1 */ - long usec; /* delay in microseconds */ -{ - static struct { /* `timeval' */ - long tv_sec; /* seconds */ - long tv_usec; /* microsecs */ - } delay; /* _select() timeout */ - - delay.tv_sec = usec / 1000000L; - delay.tv_usec = usec % 1000000L; - - return select(0, (long *)0, (long *)0, (long *)0, &delay); -} -#endif - -void -pack_array (array, end) - char **array; /* The address of the array of string pointers */ - int end; /* The index of the next free entry before CLR_ */ -{ - int i, j; - - for (i = 0; i < end; i++) { - if (array[i] == NULL) { - for (j = i+1; j < end; ++j) - if (array[j] != NULL) - array[i++] = array[j]; - for (; i < end; ++i) - array[i] = NULL; - break; - } - } -} - -/* - * vfmtmsg - format a message into a buffer. Like vsprintf except we - * also specify the length of the output buffer, and we handle the - * %m (error message) format. - * Doesn't do floating-point formats. - * Returns the number of chars put into buf. - */ -#define OUTCHAR(c) (buflen > 0? (--buflen, *buf++ = (c)): 0) - -int -vfmtmsg(buf, buflen, fmt, args) - char *buf; - int buflen; - const char *fmt; - va_list args; -{ - int c, i, n; - int width, prec, fillch; - int base, len, neg, quoted; - unsigned long val = 0; - char *str, *buf0; - const char *f; - unsigned char *p; - char num[32]; - static char hexchars[] = "0123456789abcdef"; - - buf0 = buf; - --buflen; - while (buflen > 0) { - for (f = fmt; *f != '%' && *f != 0; ++f) - ; - if (f > fmt) { - len = f - fmt; - if (len > buflen) - len = buflen; - memcpy(buf, fmt, len); - buf += len; - buflen -= len; - fmt = f; - } - if (*fmt == 0) - break; - c = *++fmt; - width = prec = 0; - fillch = ' '; - if (c == '0') { - fillch = '0'; - c = *++fmt; - } - if (c == '*') { - width = va_arg(args, int); - c = *++fmt; - } else { - while (isdigit(c)) { - width = width * 10 + c - '0'; - c = *++fmt; - } - } - if (c == '.') { - c = *++fmt; - if (c == '*') { - prec = va_arg(args, int); - c = *++fmt; - } else { - while (isdigit(c)) { - prec = prec * 10 + c - '0'; - c = *++fmt; - } - } - } - str = 0; - base = 0; - neg = 0; - ++fmt; - switch (c) { - case 'd': - i = va_arg(args, int); - if (i < 0) { - neg = 1; - val = -i; - } else - val = i; - base = 10; - break; - case 'o': - val = va_arg(args, unsigned int); - base = 8; - break; - case 'x': - val = va_arg(args, unsigned int); - base = 16; - break; - case 'p': - val = (unsigned long) va_arg(args, void *); - base = 16; - neg = 2; - break; - case 's': - str = va_arg(args, char *); - break; - case 'c': - num[0] = va_arg(args, int); - num[1] = 0; - str = num; - break; - case 'm': - str = strerror(errno); - break; - case 'v': /* "visible" string */ - case 'q': /* quoted string */ - quoted = c == 'q'; - p = va_arg(args, unsigned char *); - if (fillch == '0' && prec > 0) { - n = prec; - } else { - n = strlen((char *)p); - if (prec > 0 && prec < n) - n = prec; - } - while (n > 0 && buflen > 0) { - c = *p++; - --n; - if (!quoted && c >= 0x80) { - OUTCHAR('M'); - OUTCHAR('-'); - c -= 0x80; - } - if (quoted && (c == '"' || c == '\\')) - OUTCHAR('\\'); - if (c < 0x20 || (0x7f <= c && c < 0xa0)) { - if (quoted) { - OUTCHAR('\\'); - switch (c) { - case '\t': OUTCHAR('t'); break; - case '\n': OUTCHAR('n'); break; - case '\b': OUTCHAR('b'); break; - case '\f': OUTCHAR('f'); break; - default: - OUTCHAR('x'); - OUTCHAR(hexchars[c >> 4]); - OUTCHAR(hexchars[c & 0xf]); - } - } else { - if (c == '\t') - OUTCHAR(c); - else { - OUTCHAR('^'); - OUTCHAR(c ^ 0x40); - } - } - } else - OUTCHAR(c); - } - continue; - default: - *buf++ = '%'; - if (c != '%') - --fmt; /* so %z outputs %z etc. */ - --buflen; - continue; - } - if (base != 0) { - str = num + sizeof(num); - *--str = 0; - while (str > num + neg) { - *--str = hexchars[val % base]; - val = val / base; - if (--prec <= 0 && val == 0) - break; - } - switch (neg) { - case 1: - *--str = '-'; - break; - case 2: - *--str = 'x'; - *--str = '0'; - break; - } - len = num + sizeof(num) - 1 - str; - } else { - len = strlen(str); - if (prec > 0 && len > prec) - len = prec; - } - if (width > 0) { - if (width > buflen) - width = buflen; - if ((n = width - len) > 0) { - buflen -= n; - for (; n > 0; --n) - *buf++ = fillch; - } - } - if (len > buflen) - len = buflen; - memcpy(buf, str, len); - buf += len; - buflen -= len; - } - *buf = 0; - return buf - buf0; -} -- cgit v1.2.1