From e3000d1c3652d63caebb334ab96251875e875b5c Mon Sep 17 00:00:00 2001 From: Mystery Man Date: Thu, 29 Aug 2002 08:27:03 +0000 Subject: This commit was manufactured by cvs2svn to create tag 'V1_1_9_25mdk'. --- mdk-stage1/ppp/FAQ | 634 ----------------------------------------------------- 1 file changed, 634 deletions(-) delete mode 100644 mdk-stage1/ppp/FAQ (limited to 'mdk-stage1/ppp/FAQ') diff --git a/mdk-stage1/ppp/FAQ b/mdk-stage1/ppp/FAQ deleted file mode 100644 index 96bc5c708..000000000 --- a/mdk-stage1/ppp/FAQ +++ /dev/null @@ -1,634 +0,0 @@ -This is a list of Frequently Asked Questions about using ppp-2.x and -their answers. - - ------------------------------------------------------------------------- - -Q: Can you give me an example of how I might set up my machine to dial -out to an ISP? - -A: Here's an example for dialling out to an ISP via a modem on -/dev/tty02. The modem uses hardware (CTS/RTS) flow control, and the -serial port is run at 38400 baud. The ISP assigns our IP address. - -To configure pppd for this connection, create a file under -/etc/ppp/peers called (say) my-isp containing the following: - -tty02 crtscts 38400 -connect 'chat -v -f /etc/ppp/chat/my-isp' -defaultroute - -The ppp connection is then initiated using the following command: - -pppd call my-isp - -Of course, if the directory containing pppd is not in your path, you -will need to give the full pathname for pppd, for example, -/usr/sbin/pppd. - -When you run this, pppd will use the chat program to dial the ISP and -invoke its ppp service. Chat will read the file specified with -f, -namely /etc/ppp/chat/my-isp, to find a list of strings to expect to -receive, and strings to send. This file would contain something like -this: - -ABORT "NO CARRIER" -ABORT "NO DIALTONE" -ABORT "ERROR" -ABORT "NO ANSWER" -ABORT "BUSY" -ABORT "Username/Password Incorrect" -"" "at" -OK "at&d2&c1" -OK "atdt2479381" -"name:" "^Uusername" -"word:" "\qpassword" -"annex" "\q^Uppp" -"Switching to PPP-ppp-Switching to PPP" - -You will need to change the details here. The first string on each -line is a string to expect to receive; the second is the string to -send. You can add or delete lines according to the dialog required to -access your ISP's system. This example is for a modem with a standard -AT command set, dialling out to an Annex terminal server. The \q -toggles "quiet" mode; when quiet mode is on, the strings to be sent -are replaced by ?????? in the log. You may need to go through the -dialog manually using kermit or tip first to determine what should go -in the script. - -To terminate the link, run the following script, called (say) -kill-ppp: - -#!/bin/sh -unit=ppp${1-0} -piddir=/var/run -if [ -f $piddir/$unit.pid ]; then - kill -1 `cat $piddir/$unit.pid` -fi - -On some systems (SunOS, Solaris, Ultrix), you will need to change -/var/run to /etc/ppp. - - ------------------------------------------------------------------------- - -Q: Can you give me an example of how I could set up my office machine -so I can dial in to it from home? - -A: Let's assume that the office machine is called "office" and is on a -local ethernet subnet. Call the home machine "home" and give it an IP -address on the same subnet as "office". We'll require both machines -to authenticate themselves to each other. - -Set up the files on "office" as follows: - -/etc/ppp/options contains: - -auth # require the peer to authenticate itself -lock -# other options can go here if desired - -/etc/ppp/chap-secrets contains: - -home office "beware the frub-jub" home -office home "bird, my son!%&*" - - -Set up a modem on a serial port so that users can dial in to the -modem and get a login prompt. - -On "home", set up the files as follows: - -/etc/ppp/options contains the same as on "office". - -/etc/ppp/chap-secrets contains: - -home office "beware the frub-jub" - -office home "bird, my son!%&*" office - -Create a file called /etc/ppp/peers/office containing the following: - -tty02 crtscts 38400 -connect 'chat -v -f /etc/ppp/chat/office' -defaultroute - -(You may need to change some of the details here.) - -Create the /etc/ppp/chat/office file containing the following: - -ABORT "NO CARRIER" -ABORT "NO DIALTONE" -ABORT "ERROR" -ABORT "NO ANSWER" -ABORT "BUSY" -ABORT "ogin incorrect" -"" "at" -OK "at&d2&c1" -OK "atdt2479381" -"name:" "^Uusername" -"word:" "\qpassword" -"$" "\q^U/usr/sbin/pppd proxyarp" -"~" - -You will need to change the details. Note that the "$" in the -second-last line is expecting the shell prompt after a successful -login - you may need to change it to "%" or something else. - -You then initiate the connection (from home) with the command: - -pppd call office - ------------------------------------------------------------------------- - -Q: When I try to establish a connection, the modem successfully dials -the remote system, but then hangs up a few seconds later. How do I -find out what's going wrong? - -A: There are a number of possible problems here. The first thing to -do is to ensure that pppd's messages are visible. Pppd uses the -syslog facility to log messages which help to identify specific -problems. Messages from pppd have facility "daemon" and levels -ranging from "debug" to "error". - -Usually it is useful to see messages of level "notice" or higher on -the console. To see these, find the line in /etc/syslog.conf which -has /dev/console on the right-hand side, and add "daemon.notice" in -the list on the left. The line will end up looking something like -this: - -*.err;kern.debug;auth.notice;mail.crit;daemon.notice /dev/console - -Note that the whitespace is tabs, *not* spaces. - -If you are having problems, it may be useful to see messages of level -"info" as well, in which case you would change "daemon.notice" to -"daemon.info". - -In addition, it is useful to collect pppd's debugging output in a -file - the debug option to pppd causes it to log the contents of all -control packets sent and received in human-readable form. To do this, -add a line like this to /etc/syslog.conf: - -daemon,local2.debug /etc/ppp/log - -and create an empty /etc/ppp/log file. - -When you change syslog.conf, you will need to send a HUP signal to -syslogd to causes it to re-read syslog.conf. You can do this with a -command like this (as root): - - kill -HUP `cat /etc/syslogd.pid` - -(On some systems, you need to use /var/run/syslog.pid instead of -/etc/syslogd.pid.) - -After setting up syslog like this, you can use the -v flag to chat and -the `debug' option to pppd to get more information. Try initiating -the connection again; when it fails, inspect /etc/ppp/log to see what -happened and where the connection failed. - - ------------------------------------------------------------------------- - -Q: When I try to establish a connection, I get an error message saying -"Serial link is not 8-bit clean". Why? - -A: The most common cause is that your connection script hasn't -successfully dialled out to the remote system and invoked ppp service -there. Instead, pppd is talking to something (a shell or login -process on the remote machine, or maybe just the modem) which is only -outputting 7-bit characters. - -This can also arise with a modem which uses an AT command set if the -dial command is issued before pppd is invoked, rather than within a -connect script started by pppd. If the serial port is set to 7 -bits/character plus parity when the last AT command is issued, the -modem serial port will be set to the same setting. - -Note that pppd *always* sets the local serial port to 8 bits per -character, with no parity and 1 stop bit. So you shouldn't need to -issue an stty command before invoking pppd. - - ------------------------------------------------------------------------- - -Q: When I try to establish a connection, I get an error message saying -"Serial line is looped back". Why? - -A: Probably your connection script hasn't successfully dialled out to -the remote system and invoked ppp service there. Instead, pppd is -talking to something which is just echoing back the characters it -receives. The -v option to chat can help you find out what's going -on. It can be useful to include "~" as the last expect string to -chat, so chat won't return until it's seen the start of the first PPP -frame from the remote system. - -Another possibility is that your phone connection has dropped for some -obscure reason and the modem is echoing the characters it receives -from your system. - - ------------------------------------------------------------------------- - -Q: I installed pppd successfully, but when I try to run it, I get a -message saying something like "peer authentication required but no -authentication files accessible". - -A: When pppd is used on a machine which already has a connection to -the Internet (or to be more precise, one which has a default route in -its routing table), it will require all peers to authenticate -themselves. The reason for this is that if you don't require -authentication, you have a security hole, because the peer can -basically choose any IP address it wants, even the IP address of some -trusted host (for example, a host mentioned in some .rhosts file). - -On machines which don't have a default route, pppd does not require -the peer to authenticate itself. The reason is that such machines -would mostly be using pppd to dial out to an ISP which will refuse to -authenticate itself. In that case the peer can use any IP address as -long as the system does not already have a route to that address. -For example, if you have a local ethernet network, the peer can't use -an address on that network. (In fact it could if it authenticated -itself and it was permitted to use that address by the pap-secrets or -chap-secrets file.) - -There are 3 ways around the problem: - -1. If possible, arrange for the peer to authenticate itself, and -create the necessary secrets files (/etc/ppp/pap-secrets and/or -/etc/ppp/chap-secrets). - -2. If the peer refuses to authenticate itself, and will always be -using the same IP address, or one of a small set of IP addresses, you -can create an entry in the /etc/ppp/pap-secrets file like this: - - "" * "" his-ip.his-domain his-other-ip.other-domain - -(that is, using the empty string for the client name and password -fields). Of couse, you replace the 4th and following fields in the -example above with the IP address(es) that the peer may use. You can -use either hostnames or numeric IP addresses. - -3. You can add the `noauth' option to the /etc/ppp/options file. -Pppd will then not ask the peer to authenticate itself. If you do -this, I *strongly* recommend that you remove the set-uid bit from the -permissions on the pppd executable, with a command like this: - - chmod u-s /usr/sbin/pppd - -Then, an intruder could only use pppd maliciously if they had already -become root, in which case they couldn't do any more damage using pppd -than they could anyway. - - ------------------------------------------------------------------------- - -Q: What do I need to put in the secrets files? - -A: Three things: - - secrets (i.e. passwords) to use for authenticating this host to - other hosts (i.e., for proving our identity to others); - - secrets which other hosts can use for authenticating themselves - to us (i.e., so that they can prove their identity to us); and - - information about which IP addresses other hosts may use, once - they have authenticated themselves. - -There are two authentication files: /etc/ppp/pap-secrets, which -contains secrets for use with PAP (the Password Authentication -Protocol), and /etc/ppp/chap-secrets, which contains secrets for use -with CHAP (the Challenge Handshake Authentication Protocol). Both -files have the same simple format, which is as follows: - -- The file contains a series of entries, each of which contains a -secret for authenticating one machine to another. - -- Each entry is contained on a single logical line. A logical line -may be continued across several lines by placing a backslash (\) at -the end of each line except the last. - -- Each entry has 3 or more fields, separated by whitespace (spaces -and/or tabs). These fields are, in order: - * The name of the machine that is authenticating itself - (the "client"). - * The name of the machine that is authenticating the client - (the "server"). - * The secret to be used for authenticating that client to that - server. If this field begins with the at-sign `@', the rest - of the field is taken as the name of a file containing the - actual secret. - * The 4th and any following fields list the IP address(es) - that the client may use. - -- The file may contain comments, which begin with a `#' and continue -to the end of the line. - -- Double quotes `"' should be used around a field if it contains -characters with special significance, such as space, tab, `#', etc. - -- The backslash `\' may be used before characters with special -significance (space, tab, `#', `\', etc.) to remove that significance. - -Some important points to note: - -* A machine can be *both* a "client" and a "server" for the purposes -of authentication - this happens when both peers require the other to -authenticate itself. So A would authenticate itself to B, and B would -also authenticate itself to A (possibly using a different -authentication protocol). - -* If both the "client" and the "server" are running ppp-2.x, they need -to have a similar entry in the appropriate secrets file; the first two -fields are *not* swapped on the client, compared to the server. So -the client might have an entry like this: - - ay bee "our little secret" - - -and the corresponding entry on the server could look like this: - - ay bee "our little secret" 123.45.67.89 - - ------------------------------------------------------------------------- - -Q: Explain about PAP and CHAP? - -PAP stands for the Password Authentication Protocol. With this -protocol, the "client" (the machine that needs to authenticate itself) -sends its name and a password, in clear text, to the "server". The -server returns a message indicating whether the name and password are -valid. - -CHAP stands for the Challenge Handshake Authentication Protocol. It -is designed to address some of the deficiencies and vulnerabilities of -PAP. Like PAP, it is based on the client and server having a shared -secret, but the secret is never passed in clear text over the link. -Instead, the server sends a "challenge" - an arbitrary string of -bytes, and the client must prove it knows the shared secret by -generating a hash value from the challenge combined with the shared -secret, and sending the hash value back to the server. The server -also generates the hash value and compares it with the value received -from the client. - -At a practical level, CHAP can be slightly easier to configure than -PAP because the server sends its name with the challenge. Thus, when -finding the appropriate secret in the secrets file, the client knows -the server's name. In contrast, with PAP, the client has to find its -password (i.e. the shared secret) before it has received anything from -the server. Thus, it may be necessary to use the `remotename' option -to pppd when using PAP authentication so that it can select the -appropriate secret from /etc/ppp/pap-secrets. - -Microsoft also has a variant of CHAP which uses a different hashing -arrangement from normal CHAP. There is a client-side implementation -of Microsoft's CHAP in ppp-2.3; see README.MSCHAP80. - - ------------------------------------------------------------------------- - -Q: When the modem hangs up, without the remote system having -terminated the connection properly, pppd does not notice the hangup, -but just keeps running. How do I get pppd to notice the hangup and -exit? - -A: Pppd detects modem hangup by looking for an end-of-file indication -from the serial driver, which should be generated when the CD (carrier -detect) signal on the serial port is deasserted. For this to work: - -- The modem has to be set to assert CD when the connection is made and -deassert it when the phone line hangs up. Usually the AT&C1 modem -command sets this mode. - -- The cable from the modem to the serial port must connect the CD -signal (on pin 8). - -- Some serial drivers have a "software carrier detect" mode, which -must be *disabled*. The method of doing this varies between systems. -Under SunOS, use the ttysoftcar command. Under NetBSD, edit /etc/ttys -to remove the "softcar" flag from the line for the serial port, and -run ttyflags. - - ------------------------------------------------------------------------- - -Q: Why should I use PPP compression (BSD-Compress or Deflate) when my -modem already does V.42 compression? Won't it slow the CPU down a -lot? - -A: Using PPP compression is preferable, especially when using modems -over phone lines, for the following reasons: - -- The V.42 compression in the modem isn't very strong - it's an LZW -technique (same as BSD-Compress) with a 10, 11 or 12 bit code size. -With BSD-Compress you can use a code size of up to 15 bits and get -much better compression, or you can use Deflate and get even better -compression ratios. - -- I have found that enabling V.42 compression in my 14.4k modem -increases the round-trip time for a character to be sent, echoed and -returned by around 40ms, from 160ms to 200ms (with error correction -enabled). This is enough to make it feel less responsive on rlogin or -telnet sessions. Using PPP compression adds less than 5ms (small -enough that I couldn't measure it reliably). I admit my modem is a -cheapie and other modems may well perform better. - -- While compression and decompression do require some CPU time, they -reduce the amount of time spent in the serial driver to transmit a -given amount of data. Many machines require an interrupt for each -character sent or received, and the interrupt handler can take a -significant amount of CPU time. So the increase in CPU load isn't as -great as you might think. My measurements indicate that a system with -a 33MHz 486 CPU should be able to do Deflate compression for serial -link speeds of up to 100kb/s or more. It depends somewhat on the type -of data, of course; for example, when compressing a string of nulls -with Deflate, it's hard to get a high output data rate from the -compressor, simply because it compresses strings of nulls so well that -it has to eat a very large amount of input data to get each byte of -output. - - ------------------------------------------------------------------------- - -Q: I get messages saying "Unsupported protocol (...) received". What do -these mean? - -A: If you only get one or two when pppd starts negotiating with the -peer, they mean that the peer wanted to negotiate some PPP protocol -that pppd doesn't understand. This doesn't represent a problem, it -simply means that there is some functionality that the peer supports -that pppd doesn't, so that functionality can't be used. - -If you get them sporadically while the link is operating, or if the -protocol numbers (in parentheses) don't correspond to any valid PPP -protocol that the peer might be using, then the problem is probably -that characters are getting corrupted on the receive side, or that -extra characters are being inserted into the receive stream somehow. -If this is happening, most packets that get corrupted should get -discarded by the FCS (Frame Check Sequence, a 16-bit CRC) check, but a -small number may get through. - -One possibility may be that you are receiving broadcast messages on -the remote system which are being sent over your serial link. Another -possibility is that your modem is set for XON/XOFF (software) flow -control and is inserting ^Q and ^S characters into the receive data -stream. - - ------------------------------------------------------------------------- - -Q: I get messages saying "Protocol-Reject for unsupported protocol ...". -What do these mean? - -A: This is the other side of the previous question. If characters are -getting corrupted on the way to the peer, or if your system is -inserting extra bogus characters into the transmit data stream, the -peer may send protocol-reject messages to you, resulting in the above -message (since your pppd doesn't recognize the protocol number -either.) - - ------------------------------------------------------------------------- - -Q: I get a message saying something like "ioctl(TIOCSETD): Operation -not permitted". How do I fix this? - -A: This is because pppd is not running as root. If you have not -installed pppd setuid-root, you will have to be root to run it. If -you have installed pppd setuid-root and you still get this message, it -is probably because your shell is using some other copy of pppd than -the installed one - for example, if you are in the pppd directory -where you've just built pppd and your $PATH has . before /usr/sbin (or -wherever pppd gets installed). - - ------------------------------------------------------------------------- - -Q: Has your package been ported to HP/UX or IRIX or AIX? - -A: No. I don't have access to systems running HP/UX or AIX. No-one -has volunteered to port it to HP/UX. I had someone who did a port for -AIX 4.x, but who is no longer able to maintain it. And apparently AIX -3.x is quite different, so it would need a separate port. - -IRIX includes a good PPP implementation in the standard distribution, -as far as I know. - - ------------------------------------------------------------------------- - -Q: Under SunOS 4, when I try to modload the ppp modules, I get the -message "can't open /dev/vd: No such device". - -A: First check in /dev that there is an entry like this: - -crw-r--r-- 1 root 57, 0 Oct 2 1991 vd - -If not, make one (mknod /dev/vd c 57 0). If the problem still exists, -probably your kernel has been configured without the vd driver -included. The vd driver is needed for loadable module support. - -First, identify the config file that was used. When you boot your -machine, or if you run /etc/dmesg, you'll see a line that looks -something like this: - -SunOS Release 4.1.3_U1 (CAP_XBOX) #7: Thu Mar 21 15:31:56 EST 1996 - ^^^^^^^^ - this is the config file name - -The config file will be in the /sys/`arch -k`/conf directory (arch -k -should return sun4m for a SparcStation 10, sun3x for a Sun 3/80, -etc.). Look in there for a line saying "options VDDRV". If that line -isn't present (or is commented out), add it (or uncomment it). - -You then need to rebuild the kernel as described in the SunOS -manuals. Basically you need to run config and make like this: - - /usr/etc/config CAP_XBOX - cd ../CAP_XBOX - make - -(replacing the string CAP_XBOX by the name of the config file for your -kernel, of course). - -Then copy the new kernel to /: - - mv /vmunix /vmunix.working - cp vmunix / - -and reboot. Modload should then work. - - ------------------------------------------------------------------------- - -Q: I'm running Linux (or NetBSD or FreeBSD), and my system comes with -PPP already. Should I consider installing this package? Why? - -A: The PPP that is already installed in your system is (or is derived -from) some version of this PPP package. You can find out what version -of this package is already installed with the command "pppd --help". -If this is older than the latest version, you may wish to install the -latest version so that you can take advantage of the new features or -bug fixes. - - ------------------------------------------------------------------------- - -Q: I'm running pppd in demand mode, and I find that pppd often dials -out unnecessarily when I try to make a connection within my local -machine or with a machine on my local LAN. What can I do about this? - -A: Very often the cause of this is that a program is trying to contact -a nameserver to resolve a hostname, and the nameserver (specified in -/etc/resolv.conf, usually) is on the far side of the ppp link. You -can try executing a command such as `ping myhost' (where myhost is the -name of the local machine, or some other machine on a local LAN), to -see whether that starts the ppp link. If it does, check the setup of -your /etc/hosts file to make sure you have the local machine and any -hosts on your local LAN listed, and /etc/resolv.conf and/or -/etc/nsswitch.conf files to make sure you resolve hostnames from -/etc/hosts if possible before trying to contact a nameserver. - - ------------------------------------------------------------------------- - -Q: Since I installed ppp-2.3.6, dialin users to my server have been -getting this message when they run pppd: - -peer authentication required but no suitable secret(s) found for -authenticating any peer to us (ispserver) - -A: In 2.3.6, the default is to let an unauthenticated peer only use IP -addresses to which the machine doesn't already have a route. So on a -machine with a default route, everyone has to authenticate. If you -really don't want that, you can put `noauth' in the /etc/ppp/options -file. Note that there is then no check on who is using which IP -address. IMHO, this is undesirably insecure, but I guess it may be -tolerable as long as you don't use any .rhosts files or anything like -that. I recommend that you require dialin users to authenticate, even -if just with PAP using their login password (using the `login' option -to pppd). If you do use `noauth', you should at least have a pppusers -group and set the permissions on pppd to allow only user and group to -execute it. - ------------------------------------------------------------------------- - -Q: When running pppd as a dial-in server, I often get the message -"LCP: timeout sending Config-Requests" from pppd. It seems to be -random, but dial-out always works fine. What is wrong? - -A: Most modern modems auto-detects the speed of the serial line -between the modem and the computer. This auto-detection occurs when -the computer sends characters to the modem, when the modem is in -command mode. It does not occur when the modem is in data mode. -Thus, if you send commands to the modem at 2400 bps, and then change -the serial port speed to 115200 bps, the modem will not detect this -change until something is transmitted from the computer to the modem. -When running pppd in dial-in mode (i.e. without a connect script), -pppd sets the speed of the serial port, but does not transmit -anything. If the modem was already running at the specified speed, -everything is fine, but if not, you will just receive garbage from the -modem. To cure this, use an init script such as the following: - - pppd ttyS0 115200 modem crtscts init "chat '' AT OK" - -To reset the modem and enable auto-answer, use: - - pppd ttyS0 115200 modem crtscts init "chat '' ATZ OK ATS0=1 OK" -- cgit v1.2.1