From 18034d3517d6babf2f65baf8e1296102ec1cf72d Mon Sep 17 00:00:00 2001
From: Sharuzzaman Ahmat Raslan <sharuzzaman@mandriva.org>
Date: Sat, 29 Oct 2005 03:30:34 +0000
Subject: Updated Malay translation

---
 perl-install/share/po/ms.po | 5034 +++++++++++++++++++++++--------------------
 1 file changed, 2718 insertions(+), 2316 deletions(-)

diff --git a/perl-install/share/po/ms.po b/perl-install/share/po/ms.po
index 3414c97a6..03e0f3c02 100644
--- a/perl-install/share/po/ms.po
+++ b/perl-install/share/po/ms.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
 "POT-Creation-Date: 2005-10-28 23:26+0800\n"
-"PO-Revision-Date: 2005-10-23 20:35+0800\n"
+"PO-Revision-Date: 2005-10-29 09:20+0800\n"
 "Last-Translator: Sharuzzaman Ahmat Raslan <sharuzzaman@myrealbox.com>\n"
 "Language-Team: Malay <translation-team-ms@lists.sourceforge.net>\n"
 "MIME-Version: 1.0\n"
@@ -21,14 +21,13 @@ msgstr "Kekunci USB mana yang anda hendak format?"
 #: ../move/move.pm:296
 #, c-format
 msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
+"You are about to format a USB device \"%s\". This will delete all data on it.\n"
 "Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
+"We advise you to unplug all other USB storage devices while doing this operation."
 msgstr ""
 
-#: ../move/move.pm:448 ../move/move.pm:460
+#: ../move/move.pm:448
+#: ../move/move.pm:460
 #, c-format
 msgid "Key is not writable"
 msgstr "Kekunci tidak boleh ditulis"
@@ -45,7 +44,8 @@ msgstr ""
 msgid "Retry"
 msgstr "Cuba semula"
 
-#: ../move/move.pm:453 ../move/move.pm:497
+#: ../move/move.pm:453
+#: ../move/move.pm:497
 #, c-format
 msgid "Continue without USB key"
 msgstr "Teruskan tanpa kekunci USB"
@@ -61,7 +61,9 @@ msgid ""
 "plug the key again, and launch Mandriva Move again."
 msgstr ""
 
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332
+#: ../move/move.pm:468
+#: help.pm:409
+#: install_steps_interactive.pm:1332
 #, c-format
 msgid "Reboot"
 msgstr "Boot semula"
@@ -120,8 +122,7 @@ msgstr "Sila tunggu, menetapkan fail konfigurasi sistem pada kekunci USB"
 #: ../move/move.pm:546
 #, c-format
 msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-"Masukkan maklumat pengguna anda, kata laluan akan digunakan untuk screensaver"
+msgstr "Masukkan maklumat pengguna anda, kata laluan akan digunakan untuk screensaver"
 
 #: ../move/move.pm:556
 #, c-format
@@ -133,100 +134,196 @@ msgstr "Tetapan auto"
 msgid "Please wait, detecting and configuring devices..."
 msgstr "Sila tunggu, mengesan dan menetapkan peranti..."
 
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
-#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
-#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
-#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
-#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:216 install_any.pm:1777
-#: install_any.pm:1829 install_steps.pm:81 install_steps_interactive.pm:37
-#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
-#: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:833 network/netconnect.pm:862
-#: network/netconnect.pm:962 network/netconnect.pm:966
-#: network/netconnect.pm:970 network/netconnect.pm:975
-#: network/netconnect.pm:1120 network/netconnect.pm:1124
-#: network/netconnect.pm:1243 network/netconnect.pm:1248
-#: network/netconnect.pm:1268 network/netconnect.pm:1427
-#: network/thirdparty.pm:319 network/thirdparty.pm:326
-#: network/thirdparty.pm:370 network/thirdparty.pm:372
-#: network/thirdparty.pm:393 network/thirdparty.pm:417
-#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
-#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
-#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
-#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
-#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
-#: printer/printerdrake.pm:772 printer/printerdrake.pm:1555
-#: printer/printerdrake.pm:1603 printer/printerdrake.pm:1640
-#: printer/printerdrake.pm:1685 printer/printerdrake.pm:1689
-#: printer/printerdrake.pm:1703 printer/printerdrake.pm:1795
-#: printer/printerdrake.pm:1876 printer/printerdrake.pm:1880
-#: printer/printerdrake.pm:1884 printer/printerdrake.pm:1933
-#: printer/printerdrake.pm:1991 printer/printerdrake.pm:1995
-#: printer/printerdrake.pm:2009 printer/printerdrake.pm:2129
-#: printer/printerdrake.pm:2133 printer/printerdrake.pm:2176
-#: printer/printerdrake.pm:2249 printer/printerdrake.pm:2267
-#: printer/printerdrake.pm:2276 printer/printerdrake.pm:2285
-#: printer/printerdrake.pm:2296 printer/printerdrake.pm:2360
-#: printer/printerdrake.pm:2511 printer/printerdrake.pm:2924
-#: printer/printerdrake.pm:3208 printer/printerdrake.pm:3214
-#: printer/printerdrake.pm:3779 printer/printerdrake.pm:3783
-#: printer/printerdrake.pm:3787 printer/printerdrake.pm:4183
-#: printer/printerdrake.pm:4424 printer/printerdrake.pm:4452
-#: printer/printerdrake.pm:4529 printer/printerdrake.pm:4595
-#: printer/printerdrake.pm:4715 standalone/drakTermServ:394
-#: standalone/drakTermServ:464 standalone/drakTermServ:473
-#: standalone/drakTermServ:774 standalone/drakTermServ:781
-#: standalone/drakTermServ:802 standalone/drakTermServ:849
-#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
-#: standalone/drakTermServ:1581 standalone/drakTermServ:1589
-#: standalone/drakTermServ:1594 standalone/drakTermServ:1602
-#: standalone/drakTermServ:1618 standalone/drakTermServ:1638
-#: standalone/drakauth:36 standalone/drakbackup:511 standalone/drakbackup:625
-#: standalone/drakbackup:1105 standalone/drakbackup:1136
-#: standalone/drakbackup:1321 standalone/drakbackup:1653
-#: standalone/drakbackup:1809 standalone/drakbackup:2525
-#: standalone/drakbackup:4435 standalone/drakclock:124
-#: standalone/drakconnect:676 standalone/drakconnect:680
-#: standalone/drakconnect:685 standalone/drakconnect:700
-#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
-#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
-#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
-#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
-#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:385
-#: standalone/draksambashare:389 standalone/draksambashare:392
-#: standalone/draksambashare:395 standalone/draksambashare:455
-#: standalone/draksambashare:479 standalone/draksambashare:553
-#: standalone/draksambashare:635 standalone/draksambashare:702
-#: standalone/draksambashare:802 standalone/draksambashare:809
-#: standalone/draksambashare:944 standalone/draksambashare:1135
-#: standalone/draksambashare:1144 standalone/draksambashare:1153
-#: standalone/draksambashare:1174 standalone/draksambashare:1183
-#: standalone/draksambashare:1192 standalone/draksambashare:1212
-#: standalone/draksambashare:1220 standalone/draksambashare:1232
-#: standalone/draksplash:162 standalone/drakxtv:107
-#: standalone/finish-install:49 standalone/logdrake:171
-#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
+#: ../move/move.pm:604
+#: ../move/move.pm:660
+#: ../move/move.pm:664
+#: diskdrake/dav.pm:75
+#: diskdrake/hd_gtk.pm:113
+#: diskdrake/interactive.pm:230
+#: diskdrake/interactive.pm:243
+#: diskdrake/interactive.pm:404
+#: diskdrake/interactive.pm:422
+#: diskdrake/interactive.pm:558
+#: diskdrake/interactive.pm:563
+#: diskdrake/smbnfs_gtk.pm:41
+#: do_pkgs.pm:19
+#: do_pkgs.pm:39
+#: do_pkgs.pm:52
+#: fsedit.pm:216
+#: install_any.pm:1777
+#: install_any.pm:1829
+#: install_steps.pm:81
+#: install_steps_interactive.pm:37
+#: interactive/http.pm:117
+#: interactive/http.pm:118
+#: modules/interactive.pm:19
+#: network/ndiswrapper.pm:27
+#: network/ndiswrapper.pm:42
+#: network/ndiswrapper.pm:89
+#: network/ndiswrapper.pm:101
+#: network/netconnect.pm:833
+#: network/netconnect.pm:862
+#: network/netconnect.pm:962
+#: network/netconnect.pm:966
+#: network/netconnect.pm:970
+#: network/netconnect.pm:975
+#: network/netconnect.pm:1120
+#: network/netconnect.pm:1124
+#: network/netconnect.pm:1243
+#: network/netconnect.pm:1248
+#: network/netconnect.pm:1268
+#: network/netconnect.pm:1427
+#: network/thirdparty.pm:319
+#: network/thirdparty.pm:326
+#: network/thirdparty.pm:370
+#: network/thirdparty.pm:372
+#: network/thirdparty.pm:393
+#: network/thirdparty.pm:417
+#: printer/printerdrake.pm:244
+#: printer/printerdrake.pm:251
+#: printer/printerdrake.pm:276
+#: printer/printerdrake.pm:422
+#: printer/printerdrake.pm:427
+#: printer/printerdrake.pm:440
+#: printer/printerdrake.pm:450
+#: printer/printerdrake.pm:514
+#: printer/printerdrake.pm:686
+#: printer/printerdrake.pm:690
+#: printer/printerdrake.pm:772
+#: printer/printerdrake.pm:1555
+#: printer/printerdrake.pm:1603
+#: printer/printerdrake.pm:1640
+#: printer/printerdrake.pm:1685
+#: printer/printerdrake.pm:1689
+#: printer/printerdrake.pm:1703
+#: printer/printerdrake.pm:1795
+#: printer/printerdrake.pm:1876
+#: printer/printerdrake.pm:1880
+#: printer/printerdrake.pm:1884
+#: printer/printerdrake.pm:1933
+#: printer/printerdrake.pm:1991
+#: printer/printerdrake.pm:1995
+#: printer/printerdrake.pm:2009
+#: printer/printerdrake.pm:2129
+#: printer/printerdrake.pm:2133
+#: printer/printerdrake.pm:2176
+#: printer/printerdrake.pm:2249
+#: printer/printerdrake.pm:2267
+#: printer/printerdrake.pm:2276
+#: printer/printerdrake.pm:2285
+#: printer/printerdrake.pm:2296
+#: printer/printerdrake.pm:2360
+#: printer/printerdrake.pm:2511
+#: printer/printerdrake.pm:2924
+#: printer/printerdrake.pm:3208
+#: printer/printerdrake.pm:3214
+#: printer/printerdrake.pm:3779
+#: printer/printerdrake.pm:3783
+#: printer/printerdrake.pm:3787
+#: printer/printerdrake.pm:4183
+#: printer/printerdrake.pm:4424
+#: printer/printerdrake.pm:4452
+#: printer/printerdrake.pm:4529
+#: printer/printerdrake.pm:4595
+#: printer/printerdrake.pm:4715
+#: standalone/drakTermServ:394
+#: standalone/drakTermServ:464
+#: standalone/drakTermServ:473
+#: standalone/drakTermServ:774
+#: standalone/drakTermServ:781
+#: standalone/drakTermServ:802
+#: standalone/drakTermServ:849
+#: standalone/drakTermServ:1095
+#: standalone/drakTermServ:1572
+#: standalone/drakTermServ:1581
+#: standalone/drakTermServ:1589
+#: standalone/drakTermServ:1594
+#: standalone/drakTermServ:1602
+#: standalone/drakTermServ:1618
+#: standalone/drakTermServ:1638
+#: standalone/drakauth:36
+#: standalone/drakbackup:511
+#: standalone/drakbackup:625
+#: standalone/drakbackup:1105
+#: standalone/drakbackup:1136
+#: standalone/drakbackup:1321
+#: standalone/drakbackup:1653
+#: standalone/drakbackup:1809
+#: standalone/drakbackup:2525
+#: standalone/drakbackup:4435
+#: standalone/drakclock:124
+#: standalone/drakconnect:676
+#: standalone/drakconnect:680
+#: standalone/drakconnect:685
+#: standalone/drakconnect:700
+#: standalone/drakfont:210
+#: standalone/drakfont:223
+#: standalone/drakfont:261
+#: standalone/drakgw:50
+#: standalone/drakgw:188
+#: standalone/drakhosts:98
+#: standalone/drakhosts:246
+#: standalone/drakhosts:253
+#: standalone/drakhosts:260
+#: standalone/draknfs:306
+#: standalone/draknfs:609
+#: standalone/draknfs:616
+#: standalone/draknfs:623
+#: standalone/drakroam:33
+#: standalone/draksambashare:385
+#: standalone/draksambashare:389
+#: standalone/draksambashare:392
+#: standalone/draksambashare:395
+#: standalone/draksambashare:455
+#: standalone/draksambashare:479
+#: standalone/draksambashare:553
+#: standalone/draksambashare:635
+#: standalone/draksambashare:702
+#: standalone/draksambashare:802
+#: standalone/draksambashare:809
+#: standalone/draksambashare:944
+#: standalone/draksambashare:1135
+#: standalone/draksambashare:1144
+#: standalone/draksambashare:1153
+#: standalone/draksambashare:1174
+#: standalone/draksambashare:1183
+#: standalone/draksambashare:1192
+#: standalone/draksambashare:1212
+#: standalone/draksambashare:1220
+#: standalone/draksambashare:1232
+#: standalone/draksplash:162
+#: standalone/drakxtv:107
+#: standalone/finish-install:49
+#: standalone/logdrake:171
+#: standalone/logdrake:440
+#: standalone/logdrake:445
+#: standalone/scannerdrake:59
+#: standalone/scannerdrake:202
+#: standalone/scannerdrake:261
+#: standalone/scannerdrake:715
+#: standalone/scannerdrake:726
+#: standalone/scannerdrake:865
+#: standalone/scannerdrake:876
+#: standalone/scannerdrake:946
+#: wizards.pm:95
+#: wizards.pm:99
+#: wizards.pm:121
 #, c-format
 msgid "Error"
 msgstr "Ralat"
 
-#: ../move/move.pm:605 install_steps.pm:82
+#: ../move/move.pm:605
+#: install_steps.pm:82
 #, c-format
 msgid ""
 "An error occurred, but I do not know how to handle it nicely.\n"
 "Continue at your own risk."
 msgstr ""
-"Ralat telah berlaku, tetapi saya tidak tahu bagaimana untuk mengawalnya "
-"dengan baik.\n"
+"Ralat telah berlaku, tetapi saya tidak tahu bagaimana untuk mengawalnya dengan baik.\n"
 "Teruskan atas risiko anda."
 
-#: ../move/move.pm:660 install_steps_interactive.pm:37
+#: ../move/move.pm:660
+#: install_steps_interactive.pm:37
 #, c-format
 msgid "An error occurred"
 msgstr "Ralat telah berlaku"
@@ -261,7 +358,8 @@ msgstr "Buang fail tetapan sistem"
 msgid "Simply reboot"
 msgstr "Hanya boot semula"
 
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
+#: ../move/tree/mdk_totem:50
+#: ../move/tree/mdk_totem:96
 #, c-format
 msgid "You can only run with no CDROM support"
 msgstr ""
@@ -276,8 +374,10 @@ msgstr "Matikan program tersebut"
 msgid "No CDROM support"
 msgstr "Tiada sokongan CDROM"
 
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
-#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
+#: ../move/tree/mdk_totem:76
+#: diskdrake/hd_gtk.pm:92
+#: diskdrake/interactive.pm:1052
+#: diskdrake/interactive.pm:1062
 #: diskdrake/interactive.pm:1115
 #, c-format
 msgid "Read carefully!"
@@ -397,12 +497,14 @@ msgstr "Guna sambungan Xinerama"
 msgid "Configure only card \"%s\"%s"
 msgstr "Tetapkan hanya kad \"%s\"%s"
 
-#: Xconfig/card.pm:420 Xconfig/various.pm:23
+#: Xconfig/card.pm:420
+#: Xconfig/various.pm:23
 #, c-format
 msgid "Xorg %s"
 msgstr "Xorg %s"
 
-#: Xconfig/card.pm:427 Xconfig/various.pm:22
+#: Xconfig/card.pm:427
+#: Xconfig/various.pm:22
 #, c-format
 msgid "Xorg %s with 3D hardware acceleration"
 msgstr ""
@@ -424,17 +526,28 @@ msgid ""
 "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
 
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
+#: Xconfig/main.pm:90
+#: Xconfig/main.pm:91
+#: Xconfig/monitor.pm:116
+#: any.pm:973
 #, c-format
 msgid "Custom"
 msgstr "Tersendiri"
 
-#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 install_steps_interactive.pm:1332
-#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
-#: printer/printerdrake.pm:4524 printer/printerdrake.pm:4988
-#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
-#: standalone/logdrake:176 standalone/net_applet:103
+#: Xconfig/main.pm:127
+#: diskdrake/dav.pm:26
+#: help.pm:14
+#: install_steps_interactive.pm:86
+#: install_steps_interactive.pm:1332
+#: printer/printerdrake.pm:882
+#: printer/printerdrake.pm:899
+#: printer/printerdrake.pm:4524
+#: printer/printerdrake.pm:4988
+#: standalone/drakhosts:263
+#: standalone/drakroam:230
+#: standalone/draksplash:93
+#: standalone/logdrake:176
+#: standalone/net_applet:103
 #: standalone/scannerdrake:477
 #, c-format
 msgid "Quit"
@@ -445,12 +558,14 @@ msgstr "Keluar"
 msgid "Graphic Card"
 msgstr "Kad Grafik"
 
-#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
+#: Xconfig/main.pm:132
+#: Xconfig/monitor.pm:110
 #, c-format
 msgid "Monitor"
 msgstr "Monitor"
 
-#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
+#: Xconfig/main.pm:135
+#: Xconfig/resolution_and_depth.pm:287
 #, c-format
 msgid "Resolution"
 msgstr "Resolusi"
@@ -460,9 +575,13 @@ msgstr "Resolusi"
 msgid "Test"
 msgstr "Uji"
 
-#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
-#: printer/printerdrake.pm:1112 standalone/drakfont:494
+#: Xconfig/main.pm:143
+#: diskdrake/dav.pm:65
+#: diskdrake/interactive.pm:448
+#: diskdrake/removable.pm:24
+#: diskdrake/smbnfs_gtk.pm:79
+#: printer/printerdrake.pm:1112
+#: standalone/drakfont:494
 #: standalone/drakfont:556
 #, c-format
 msgid "Options"
@@ -497,12 +616,15 @@ msgstr "Pilih monitor"
 msgid "Plug'n Play"
 msgstr "Plug'n Play"
 
-#: Xconfig/monitor.pm:118 mouse.pm:49
+#: Xconfig/monitor.pm:118
+#: mouse.pm:49
 #, c-format
 msgid "Generic"
 msgstr "Generik"
 
-#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
+#: Xconfig/monitor.pm:119
+#: standalone/drakconnect:591
+#: standalone/harddrake2:54
 #: standalone/harddrake2:88
 #, c-format
 msgid "Vendor"
@@ -516,15 +638,12 @@ msgstr ""
 #: Xconfig/monitor.pm:137
 #, fuzzy, c-format
 msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
+"The two critical parameters are the vertical refresh rate, which is the rate\n"
 "at which the whole screen is refreshed, and most importantly the horizontal\n"
 "sync rate, which is the rate at which scanlines are displayed.\n"
 "\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n"
+"that is beyond the capabilities of your monitor: you may damage your monitor.\n"
 " If in doubt, choose a conservative setting."
 msgstr ""
 "menegak dan mengufuk\n"
@@ -565,9 +684,13 @@ msgstr ""
 msgid "Resolutions"
 msgstr ""
 
-#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
-#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1595 standalone/drakperm:250
+#: Xconfig/resolution_and_depth.pm:309
+#: diskdrake/hd_gtk.pm:336
+#: install_steps_gtk.pm:288
+#: mouse.pm:168
+#: services.pm:162
+#: standalone/drakbackup:1595
+#: standalone/drakperm:250
 #, c-format
 msgid "Other"
 msgstr "Lain-lain"
@@ -582,47 +705,100 @@ msgstr "Pilih resolusi dan kedalaman warna"
 msgid "Graphics card: %s"
 msgstr "Kad grafik: %s"
 
-#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
-#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
-#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
-#: standalone/drakTermServ:195 standalone/drakTermServ:515
-#: standalone/drakbackup:1361 standalone/drakbackup:4095
-#: standalone/drakbackup:4155 standalone/drakbackup:4199
-#: standalone/drakbackup:4453 standalone/drakconnect:158
-#: standalone/drakconnect:852 standalone/drakconnect:939
-#: standalone/drakconnect:1030 standalone/drakfont:577 standalone/drakfont:587
-#: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
-#: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
+#: Xconfig/resolution_and_depth.pm:373
+#: interactive.pm:119
+#: interactive.pm:436
+#: interactive/http.pm:103
+#: interactive/http.pm:156
+#: interactive/newt.pm:321
+#: interactive/stdio.pm:39
+#: interactive/stdio.pm:142
+#: interactive/stdio.pm:143
+#: standalone/drakTermServ:195
+#: standalone/drakTermServ:515
+#: standalone/drakbackup:1361
+#: standalone/drakbackup:4095
+#: standalone/drakbackup:4155
+#: standalone/drakbackup:4199
+#: standalone/drakbackup:4453
+#: standalone/drakconnect:158
+#: standalone/drakconnect:852
+#: standalone/drakconnect:939
+#: standalone/drakconnect:1030
+#: standalone/drakfont:577
+#: standalone/drakfont:587
+#: standalone/draksplash:173
+#: standalone/drakups:212
+#: standalone/net_monitor:339
+#: ugtk2.pm:392
+#: ugtk2.pm:490
+#: ugtk2.pm:899
+#: ugtk2.pm:922
 #, c-format
 msgid "Ok"
 msgstr "Ok"
 
-#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
-#: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/stdio.pm:39 interactive/stdio.pm:142
-#: printer/printerdrake.pm:3859 standalone/drakautoinst:215
-#: standalone/drakbackup:1361 standalone/drakbackup:4024
-#: standalone/drakbackup:4028 standalone/drakbackup:4083
-#: standalone/drakbackup:4453 standalone/drakconnect:157
-#: standalone/drakconnect:937 standalone/drakconnect:1029
-#: standalone/drakfont:587 standalone/drakfont:665 standalone/drakfont:742
-#: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
-#: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
+#: Xconfig/resolution_and_depth.pm:373
+#: diskdrake/smbnfs_gtk.pm:80
+#: help.pm:89
+#: help.pm:444
+#: install_steps_gtk.pm:455
+#: install_steps_interactive.pm:429
+#: install_steps_interactive.pm:840
+#: interactive.pm:120
+#: interactive.pm:437
+#: interactive/http.pm:104
+#: interactive/http.pm:160
+#: interactive/newt.pm:318
+#: interactive/stdio.pm:39
+#: interactive/stdio.pm:142
+#: printer/printerdrake.pm:3859
+#: standalone/drakautoinst:215
+#: standalone/drakbackup:1361
+#: standalone/drakbackup:4024
+#: standalone/drakbackup:4028
+#: standalone/drakbackup:4083
+#: standalone/drakbackup:4453
+#: standalone/drakconnect:157
+#: standalone/drakconnect:937
+#: standalone/drakconnect:1029
+#: standalone/drakfont:587
+#: standalone/drakfont:665
+#: standalone/drakfont:742
+#: standalone/draksplash:173
+#: standalone/drakups:219
+#: standalone/logdrake:176
+#: standalone/net_monitor:338
+#: ugtk2.pm:386
+#: ugtk2.pm:488
+#: ugtk2.pm:497
 #: ugtk2.pm:899
 #, c-format
 msgid "Cancel"
 msgstr "Batal"
 
-#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
-#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
-#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
-#: standalone/drakbackup:4020 standalone/drakbug:105
-#: standalone/drakconnect:153 standalone/drakconnect:236
-#: standalone/drakfont:512 standalone/draknfs:206 standalone/drakperm:133
-#: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
-#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
+#: Xconfig/resolution_and_depth.pm:373
+#: diskdrake/hd_gtk.pm:150
+#: install_steps_gtk.pm:232
+#: install_steps_gtk.pm:617
+#: interactive.pm:567
+#: interactive/gtk.pm:682
+#: interactive/gtk.pm:684
+#: standalone/drakTermServ:284
+#: standalone/drakbackup:4020
+#: standalone/drakbug:105
+#: standalone/drakconnect:153
+#: standalone/drakconnect:236
+#: standalone/drakfont:512
+#: standalone/draknfs:206
+#: standalone/drakperm:133
+#: standalone/draksambashare:320
+#: standalone/draksec:344
+#: standalone/draksec:346
+#: standalone/draksec:364
+#: standalone/draksec:366
+#: ugtk2.pm:1031
+#: ugtk2.pm:1032
 #, c-format
 msgid "Help"
 msgstr "Bantuan"
@@ -726,8 +902,7 @@ msgstr "Antaramuka bergrafik ketika permulaan"
 #: Xconfig/various.pm:74
 #, fuzzy, c-format
 msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
+"I can setup your computer to automatically start the graphical interface (Xorg) upon booting.\n"
 "Would you like Xorg to start when you reboot?"
 msgstr "mula mula?"
 
@@ -737,8 +912,7 @@ msgid ""
 "Your graphic card seems to have a TV-OUT connector.\n"
 "It can be configured to work using frame-buffer.\n"
 "\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
+"For this you have to plug your graphic card to your TV before booting your computer.\n"
 "Then choose the \"TVout\" entry in the bootloader\n"
 "\n"
 "Do you have this feature?"
@@ -756,9 +930,16 @@ msgid ""
 "other"
 msgstr ""
 
-#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473
-#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:376
+#: any.pm:142
+#: harddrake/sound.pm:192
+#: interactive.pm:474
+#: pkgs.pm:473
+#: standalone/drakconnect:160
+#: standalone/drakconnect:635
+#: standalone/draksec:68
+#: standalone/drakups:101
+#: standalone/drakxtv:92
+#: standalone/harddrake2:376
 #: standalone/service_harddrake:208
 #, c-format
 msgid "Please wait"
@@ -773,8 +954,7 @@ msgstr "Pemasangan pemuat boot sedang dijalankan"
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
+"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows error.\n"
 "This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
 "\n"
 "Assign a new Volume ID?"
@@ -805,13 +985,13 @@ msgstr ""
 #, fuzzy, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: System Commander).\n"
 "\n"
 "On which drive are you booting?"
 msgstr "on on Sistem?"
 
-#: any.pm:231 help.pm:739
+#: any.pm:231
+#: help.pm:739
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "Sektor pertama pemacu (MBR)"
@@ -826,7 +1006,9 @@ msgstr "Sektor pertama bagi partisyen root"
 msgid "On Floppy"
 msgstr "Pada Cekara Liut"
 
-#: any.pm:236 help.pm:739 printer/printerdrake.pm:4180
+#: any.pm:236
+#: help.pm:739
+#: printer/printerdrake.pm:4180
 #, c-format
 msgid "Skip"
 msgstr "Langkau"
@@ -841,12 +1023,16 @@ msgstr "Pemasangan LILO/grub"
 msgid "Where do you want to install the bootloader?"
 msgstr "Dimana anda ingin pemuatbut ini dipasang?"
 
-#: any.pm:267 standalone/drakboot:269
+#: any.pm:267
+#: standalone/drakboot:269
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "Tetapan Gaya Boot"
 
-#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
+#: any.pm:269
+#: any.pm:270
+#: any.pm:303
+#: any.pm:304
 #, c-format
 msgid "Bootloader main options"
 msgstr "Pilihan utama pemuatboot"
@@ -858,26 +1044,32 @@ msgstr "Berikan saiz ram dalam MB"
 
 #: any.pm:277
 #, fuzzy, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+msgid "Option ``Restrict command line options'' is of no use without a password"
 msgstr "tidak"
 
-#: any.pm:278 any.pm:615 authentication.pm:192
+#: any.pm:278
+#: any.pm:615
+#: authentication.pm:192
 #, c-format
 msgid "The passwords do not match"
 msgstr "Katalaluan tidak sepadan"
 
-#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1326
+#: any.pm:278
+#: any.pm:615
+#: authentication.pm:192
+#: diskdrake/interactive.pm:1326
 #, c-format
 msgid "Please try again"
 msgstr "Sila cuba lagi"
 
-#: any.pm:283 any.pm:308
+#: any.pm:283
+#: any.pm:308
 #, c-format
 msgid "Bootloader to use"
 msgstr "Pemuatboot untuk digunakan"
 
-#: any.pm:285 any.pm:310
+#: any.pm:285
+#: any.pm:310
 #, c-format
 msgid "Boot device"
 msgstr "Peranti boot"
@@ -902,15 +1094,23 @@ msgstr "Paksa tiada APIC"
 msgid "Force No Local APIC"
 msgstr "Paksa Tiada APIC Tempatan"
 
-#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:585 printer/printerdrake.pm:1867
-#: printer/printerdrake.pm:1988 standalone/drakbackup:1639
-#: standalone/drakbackup:3615 standalone/drakups:299
+#: any.pm:294
+#: any.pm:650
+#: authentication.pm:197
+#: diskdrake/smbnfs_gtk.pm:180
+#: network/netconnect.pm:585
+#: printer/printerdrake.pm:1867
+#: printer/printerdrake.pm:1988
+#: standalone/drakbackup:1639
+#: standalone/drakbackup:3615
+#: standalone/drakups:299
 #, c-format
 msgid "Password"
 msgstr "Katalaluan"
 
-#: any.pm:295 any.pm:651 authentication.pm:198
+#: any.pm:295
+#: any.pm:651
+#: authentication.pm:198
 #, c-format
 msgid "Password (again)"
 msgstr "Katalaluan (sekali lagi)"
@@ -970,17 +1170,21 @@ msgstr "OS Default?"
 msgid "Image"
 msgstr "Imej"
 
-#: any.pm:370 any.pm:380
+#: any.pm:370
+#: any.pm:380
 #, c-format
 msgid "Root"
 msgstr "Root"
 
-#: any.pm:371 any.pm:393
+#: any.pm:371
+#: any.pm:393
 #, c-format
 msgid "Append"
 msgstr "Tambah"
 
-#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
+#: any.pm:373
+#: standalone/drakboot:271
+#: standalone/drakboot:275
 #, c-format
 msgid "Video mode"
 msgstr "Mod video"
@@ -995,12 +1199,17 @@ msgstr "Initrd"
 msgid "Network profile"
 msgstr "Profil rangkaian"
 
-#: any.pm:385 any.pm:390 any.pm:392
+#: any.pm:385
+#: any.pm:390
+#: any.pm:392
 #, c-format
 msgid "Label"
 msgstr "Label"
 
-#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2093
+#: any.pm:387
+#: any.pm:397
+#: harddrake/v4l.pm:368
+#: standalone/drakbackup:2093
 #: standalone/draksec:52
 #, c-format
 msgid "Default"
@@ -1115,10 +1324,8 @@ msgstr "Sila berikan nama pengguna"
 
 #: any.pm:618
 #, fuzzy, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Nama mesti mengandungi hanya aksara latin hufuf kecil, nombor, `-' dan `_'"
+msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Nama mesti mengandungi hanya aksara latin hufuf kecil, nombor, `-' dan `_'"
 
 #: any.pm:619
 #, c-format
@@ -1126,63 +1333,77 @@ msgid "The user name is too long"
 msgstr "Nama pengguna terlalu panjang"
 
 #: any.pm:620
-#, fuzzy, c-format
+#, c-format
 msgid "This user name has already been added"
-msgstr "pengguna"
+msgstr "Nama pengguna ini telahpun ditambah"
 
-#: any.pm:621 any.pm:653
+#: any.pm:621
+#: any.pm:653
 #, c-format
 msgid "User ID"
 msgstr "ID Pengguna"
 
-#: any.pm:622 any.pm:654
+#: any.pm:622
+#: any.pm:654
 #, c-format
 msgid "Group ID"
 msgstr "ID kumpulan"
 
 #: any.pm:625
-#, fuzzy, c-format
+#, c-format
 msgid "%s must be a number"
-msgstr "Nombor siri mesti >= 1."
+msgstr "%s mestilah nombor"
 
 #: any.pm:626
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr ""
 
-#: any.pm:631 standalone/draksambashare:1216
-#, fuzzy, c-format
+#: any.pm:631
+#: standalone/draksambashare:1216
+#, c-format
 msgid "Add user"
-msgstr "Tambah Pengguna"
+msgstr "Tambah pengguna"
 
 #: any.pm:633
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "Enter a user\n"
 "%s"
-msgstr "Masukkan maklumat untuk pengguna"
+msgstr ""
+"Masukkan pengguna\n"
+"%s"
 
-#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4988
-#: standalone/drakbackup:2813 standalone/scannerdrake:668
+#: any.pm:636
+#: diskdrake/dav.pm:66
+#: diskdrake/hd_gtk.pm:154
+#: diskdrake/removable.pm:26
+#: diskdrake/smbnfs_gtk.pm:81
+#: help.pm:530
+#: interactive/http.pm:151
+#: printer/printerdrake.pm:197
+#: printer/printerdrake.pm:382
+#: printer/printerdrake.pm:4988
+#: standalone/drakbackup:2813
+#: standalone/scannerdrake:668
 #: standalone/scannerdrake:818
 #, c-format
 msgid "Done"
 msgstr "Selesai"
 
-#: any.pm:637 help.pm:51
-#, fuzzy, c-format
+#: any.pm:637
+#: help.pm:51
+#, c-format
 msgid "Accept user"
-msgstr "Pengguna Tidak Diketahui"
+msgstr "Terima pengguna"
 
 #: any.pm:648
 #, fuzzy, c-format
 msgid "Real name"
 msgstr "Nama Sebenar:"
 
-#: any.pm:649 standalone/drakbackup:1634
+#: any.pm:649
+#: standalone/drakbackup:1634
 #, fuzzy, c-format
 msgid "Login name"
 msgstr "Nama logmasuk:"
@@ -1197,7 +1418,8 @@ msgstr "Shell"
 msgid "Icon"
 msgstr "Ikon"
 
-#: any.pm:703 security/l10n.pm:14
+#: any.pm:703
+#: security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr ""
@@ -1222,12 +1444,14 @@ msgstr "Kelas objek pengguna default:\n"
 msgid "Choose the window manager to run:"
 msgstr "Pilih cakera dimana fdisk dilaksanakan"
 
-#: any.pm:719 any.pm:787
+#: any.pm:719
+#: any.pm:787
 #, fuzzy, c-format
 msgid "Please choose a language to use."
 msgstr "Pilih jenis giliran yang anda hendak guna"
 
-#: any.pm:720 any.pm:788
+#: any.pm:720
+#: any.pm:788
 #, fuzzy, c-format
 msgid "Language choice"
 msgstr "Pilihan Tidak Sah"
@@ -1245,17 +1469,23 @@ msgstr "dan ulanghidup."
 msgid "Multi languages"
 msgstr "Pembangunan/Bahasa"
 
-#: any.pm:767 any.pm:796 help.pm:647
+#: any.pm:767
+#: any.pm:796
+#: help.pm:647
 #, fuzzy, c-format
 msgid "Use Unicode by default"
 msgstr "hidupkan katalaluan bayang secara default"
 
-#: any.pm:768 help.pm:647
+#: any.pm:768
+#: help.pm:647
 #, fuzzy, c-format
 msgid "All languages"
 msgstr "Pembangunan/Bahasa"
 
-#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961
+#: any.pm:840
+#: help.pm:566
+#: help.pm:855
+#: install_steps_interactive.pm:961
 #, c-format
 msgid "Country / Region"
 msgstr "Negara / Kawasan"
@@ -1275,7 +1505,12 @@ msgstr "penuh"
 msgid "Other Countries"
 msgstr "Port lain"
 
-#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
+#: any.pm:845
+#: help.pm:51
+#: help.pm:409
+#: help.pm:431
+#: help.pm:647
+#: help.pm:722
 #: interactive.pm:397
 #, c-format
 msgid "Advanced"
@@ -1286,8 +1521,12 @@ msgstr "Lanjutan"
 msgid "Input method:"
 msgstr "Penukar Kaedah Masukan"
 
-#: any.pm:856 install_any.pm:423 network/netconnect.pm:318
-#: network/netconnect.pm:323 network/netconnect.pm:1234 network/wireless.pm:7
+#: any.pm:856
+#: install_any.pm:423
+#: network/netconnect.pm:318
+#: network/netconnect.pm:323
+#: network/netconnect.pm:1234
+#: network/wireless.pm:7
 #: printer/printerdrake.pm:105
 #, c-format
 msgid "None"
@@ -1307,30 +1546,24 @@ msgstr "Benarkan pengguna akses tanpa had"
 #, fuzzy, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n"
 "\n"
 "\"Custom\" permit a per-user granularity.\n"
 msgstr "on Kongsi dalam dan Tersendiri pengguna"
 
 #: any.pm:989
 #, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
+msgid "NFS: the traditional Unix file sharing system, with less support on Mac and Windows."
 msgstr ""
 
 #: any.pm:992
 #, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
+msgid "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux systems."
 msgstr ""
 
 #: any.pm:1000
 #, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
+msgid "You can export using NFS or SMB. Please select which you would like to use."
 msgstr ""
 
 #: any.pm:1025
@@ -1338,12 +1571,21 @@ msgstr ""
 msgid "Launch userdrake"
 msgstr "_Laksana up2date..."
 
-#: any.pm:1025 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
-#: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
-#: printer/printerdrake.pm:5306 standalone/drakTermServ:294
-#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:500
-#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
-#: standalone/draknfs:210 standalone/net_monitor:117
+#: any.pm:1025
+#: printer/printerdrake.pm:4062
+#: printer/printerdrake.pm:4065
+#: printer/printerdrake.pm:4066
+#: printer/printerdrake.pm:4067
+#: printer/printerdrake.pm:5306
+#: standalone/drakTermServ:294
+#: standalone/drakbackup:4217
+#: standalone/drakbug:126
+#: standalone/drakfont:500
+#: standalone/drakids:64
+#: standalone/drakids:77
+#: standalone/drakids:85
+#: standalone/draknfs:210
+#: standalone/net_monitor:117
 #: standalone/printerdrake:583
 #, c-format
 msgid "Close"
@@ -1376,7 +1618,8 @@ msgstr "NIS"
 msgid "Smart Card"
 msgstr "Kad Pintar"
 
-#: authentication.pm:27 authentication.pm:163
+#: authentication.pm:27
+#: authentication.pm:163
 #, fuzzy, c-format
 msgid "Windows Domain"
 msgstr "_Domain NIS:"
@@ -1398,8 +1641,7 @@ msgstr "Fail tempatan :"
 
 #: authentication.pm:66
 #, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
+msgid "Use local for all authentication and information user tell in local file"
 msgstr ""
 
 #: authentication.pm:67
@@ -1409,9 +1651,7 @@ msgstr "LDAP:"
 
 #: authentication.pm:67
 #, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
+msgid "Tells your computer to use LDAP for some or all authentication. LDAP consolidates certain types of information within your organization."
 msgstr ""
 
 #: authentication.pm:68
@@ -1421,9 +1661,7 @@ msgstr "NIS:"
 
 #: authentication.pm:68
 #, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
+msgid "Allows you to run a group of computers in the same Network Information Service domain with a common password and group file."
 msgstr ""
 
 #: authentication.pm:69
@@ -1433,9 +1671,7 @@ msgstr "_Domain NIS:"
 
 #: authentication.pm:69
 #, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
+msgid "Winbind allows the system to retrieve information and authenticate users in a Windows domain."
 msgstr ""
 
 #: authentication.pm:70
@@ -1455,9 +1691,7 @@ msgstr "tak boleh menindih bukan-direktori %s dengan direktori %s"
 
 #: authentication.pm:71
 #, c-format
-msgid ""
-"Winbind allows the system to authenticate users in a Windows Active "
-"Directory Server."
+msgid "Winbind allows the system to authenticate users in a Windows Active Directory Server."
 msgstr ""
 
 #: authentication.pm:96
@@ -1470,12 +1704,14 @@ msgstr "Pengesahan LDAP"
 msgid "LDAP Base dn"
 msgstr "DN _Asas LDAP:"
 
-#: authentication.pm:98 share/compssUsers.pl:102
+#: authentication.pm:98
+#: share/compssUsers.pl:102
 #, fuzzy, c-format
 msgid "LDAP Server"
 msgstr "Pelayan _LDAP:"
 
-#: authentication.pm:111 fsedit.pm:23
+#: authentication.pm:111
+#: fsedit.pm:23
 #, fuzzy, c-format
 msgid "simple"
 msgstr "Mudah"
@@ -1495,18 +1731,23 @@ msgstr "SSL"
 msgid "security layout (SASL/Kerberos)"
 msgstr ""
 
-#: authentication.pm:121 authentication.pm:159
+#: authentication.pm:121
+#: authentication.pm:159
 #, fuzzy, c-format
 msgid "Authentication Active Directory"
 msgstr "Pergi Ke Direktori"
 
-#: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181
+#: authentication.pm:122
+#: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Domain"
 msgstr "Domain"
 
-#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:82
+#: authentication.pm:124
+#: diskdrake/dav.pm:63
+#: help.pm:146
+#: printer/printerdrake.pm:141
+#: share/compssUsers.pl:82
 #: standalone/drakTermServ:269
 #, c-format
 msgid "Server"
@@ -1535,7 +1776,7 @@ msgstr "Sila masukkan katalaluan bagi pengguna ini."
 #: authentication.pm:140
 #, fuzzy, c-format
 msgid "Authentication NIS"
-msgstr "_Domain NIS:"
+msgstr "Pengesahan NIS"
 
 #: authentication.pm:141
 #, fuzzy, c-format
@@ -1550,21 +1791,12 @@ msgstr "_Pelayan NIS:"
 #: authentication.pm:147
 #, fuzzy, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"C Tetingkap dan Domain Tetingkap dihidupkan dan Tetingkap Domain dan "
-"Namapengguna Katalaluan."
+"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are good."
+msgstr "C Tetingkap dan Domain Tetingkap dihidupkan dan Tetingkap Domain dan Namapengguna Katalaluan."
 
 #: authentication.pm:159
 #, fuzzy, c-format
@@ -1598,13 +1830,15 @@ msgstr "dan"
 msgid "Set administrator (root) password"
 msgstr "Sila masukkan katalaluan root bagi sistem."
 
-#: authentication.pm:183 standalone/drakvpn:1111
+#: authentication.pm:183
+#: standalone/drakvpn:1111
 #, fuzzy, c-format
 msgid "Authentication method"
 msgstr "Method &Autentikasi"
 
 #. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:188 help.pm:722
+#: authentication.pm:188
+#: help.pm:722
 #, c-format
 msgid "No password"
 msgstr "Tiada katalaluan"
@@ -1614,8 +1848,12 @@ msgstr "Tiada katalaluan"
 msgid "This password is too short (it must be at least %d characters long)"
 msgstr ""
 
-#: authentication.pm:199 network/netconnect.pm:323 network/netconnect.pm:586
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
+#: authentication.pm:199
+#: network/netconnect.pm:323
+#: network/netconnect.pm:586
+#: standalone/drakauth:24
+#: standalone/drakauth:26
+#: standalone/drakconnect:481
 #, c-format
 msgid "Authentication"
 msgstr "Pengesahan"
@@ -1673,16 +1911,12 @@ msgstr "on"
 
 #: bootloader.pm:1520
 #, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
+msgid "Your bootloader configuration must be updated because partition has been renumbered"
 msgstr ""
 
 #: bootloader.pm:1533
 #, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
+msgid "The bootloader can not be installed correctly. You have to boot rescue and choose \"%s\""
 msgstr ""
 
 #: bootloader.pm:1534
@@ -1735,189 +1969,300 @@ msgstr "`(' hilang dalam `%s'"
 msgid "consolehelper missing"
 msgstr "`(' hilang dalam `%s'"
 
-#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
+#: crypto.pm:13
+#: crypto.pm:48
+#: lang.pm:207
+#: network/adsl_consts.pm:66
+#: network/adsl_consts.pm:75
+#: network/adsl_consts.pm:84
 #, c-format
 msgid "Austria"
 msgstr "Austria"
 
-#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
+#: crypto.pm:14
+#: crypto.pm:47
+#: lang.pm:208
+#: standalone/drakxtv:48
 #, c-format
 msgid "Australia"
 msgstr "Australia"
 
-#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:44
+#: crypto.pm:15
+#: crypto.pm:49
+#: lang.pm:214
+#: network/adsl_consts.pm:93
+#: network/adsl_consts.pm:102
+#: network/adsl_consts.pm:114
+#: network/adsl_consts.pm:123
+#: network/netconnect.pm:44
 #, c-format
 msgid "Belgium"
 msgstr "Belgium"
 
-#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
+#: crypto.pm:16
+#: crypto.pm:50
+#: lang.pm:223
+#: network/adsl_consts.pm:132
+#: network/adsl_consts.pm:143
+#: network/adsl_consts.pm:152
 #: network/adsl_consts.pm:161
 #, c-format
 msgid "Brazil"
 msgstr "Brazil"
 
-#: crypto.pm:17 crypto.pm:51 lang.pm:230
+#: crypto.pm:17
+#: crypto.pm:51
+#: lang.pm:230
 #, c-format
 msgid "Canada"
 msgstr "Kanada"
 
-#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
-#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
+#: crypto.pm:18
+#: crypto.pm:74
+#: lang.pm:235
+#: network/adsl_consts.pm:891
+#: network/adsl_consts.pm:900
+#: network/adsl_consts.pm:911
 #, c-format
 msgid "Switzerland"
 msgstr "Switzerland"
 
-#: crypto.pm:19 lang.pm:242
+#: crypto.pm:19
+#: lang.pm:242
 #, c-format
 msgid "Costa Rica"
 msgstr "Costa Rica"
 
-#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
+#: crypto.pm:20
+#: crypto.pm:52
+#: lang.pm:248
+#: network/adsl_consts.pm:368
 #, c-format
 msgid "Czech Republic"
 msgstr "Republik Czech"
 
-#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
+#: crypto.pm:21
+#: crypto.pm:57
+#: lang.pm:249
+#: network/adsl_consts.pm:499
 #: network/adsl_consts.pm:508
 #, c-format
 msgid "Germany"
 msgstr "Jerman"
 
-#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
+#: crypto.pm:22
+#: crypto.pm:53
+#: lang.pm:251
+#: network/adsl_consts.pm:378
 #, c-format
 msgid "Denmark"
 msgstr "Denmark"
 
-#: crypto.pm:23 crypto.pm:54 lang.pm:256
+#: crypto.pm:23
+#: crypto.pm:54
+#: lang.pm:256
 #, c-format
 msgid "Estonia"
 msgstr "Estonia"
 
-#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
-#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
-#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
-#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
-#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
-#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
-#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
+#: crypto.pm:24
+#: crypto.pm:72
+#: lang.pm:260
+#: network/adsl_consts.pm:759
+#: network/adsl_consts.pm:770
+#: network/adsl_consts.pm:781
+#: network/adsl_consts.pm:792
+#: network/adsl_consts.pm:801
+#: network/adsl_consts.pm:810
+#: network/adsl_consts.pm:819
+#: network/adsl_consts.pm:828
+#: network/adsl_consts.pm:837
+#: network/adsl_consts.pm:846
+#: network/adsl_consts.pm:855
+#: network/adsl_consts.pm:864
+#: network/adsl_consts.pm:873
 #, c-format
 msgid "Spain"
 msgstr "Sepanyol"
 
-#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
+#: crypto.pm:25
+#: crypto.pm:55
+#: lang.pm:262
+#: network/adsl_consts.pm:387
 #, c-format
 msgid "Finland"
 msgstr "Finland"
 
-#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
+#: crypto.pm:26
+#: crypto.pm:56
+#: lang.pm:267
+#: network/adsl_consts.pm:396
+#: network/adsl_consts.pm:408
+#: network/adsl_consts.pm:420
+#: network/adsl_consts.pm:431
+#: network/adsl_consts.pm:442
+#: network/adsl_consts.pm:454
+#: network/adsl_consts.pm:466
+#: network/adsl_consts.pm:477
+#: network/adsl_consts.pm:488
 #: network/netconnect.pm:41
 #, c-format
 msgid "France"
 msgstr "Perancis"
 
-#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
+#: crypto.pm:27
+#: crypto.pm:58
+#: lang.pm:280
+#: network/adsl_consts.pm:519
 #, c-format
 msgid "Greece"
 msgstr "Greek"
 
-#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
+#: crypto.pm:28
+#: crypto.pm:59
+#: lang.pm:291
+#: network/adsl_consts.pm:528
 #, c-format
 msgid "Hungary"
 msgstr "Hungary"
 
-#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
+#: crypto.pm:29
+#: crypto.pm:60
+#: lang.pm:293
+#: network/adsl_consts.pm:537
 #: standalone/drakxtv:47
 #, c-format
 msgid "Ireland"
 msgstr "Ireland"
 
-#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
+#: crypto.pm:30
+#: crypto.pm:61
+#: lang.pm:294
+#: network/adsl_consts.pm:546
 #, c-format
 msgid "Israel"
 msgstr "Israel"
 
-#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
+#: crypto.pm:31
+#: crypto.pm:62
+#: lang.pm:300
+#: network/adsl_consts.pm:557
+#: network/adsl_consts.pm:569
+#: network/adsl_consts.pm:580
+#: network/adsl_consts.pm:589
+#: network/netconnect.pm:43
+#: standalone/drakxtv:47
 #, c-format
 msgid "Italy"
 msgstr "Itali"
 
-#: crypto.pm:32 crypto.pm:63 lang.pm:303
+#: crypto.pm:32
+#: crypto.pm:63
+#: lang.pm:303
 #, c-format
 msgid "Japan"
 msgstr "Jepun"
 
-#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:42
+#: crypto.pm:33
+#: crypto.pm:64
+#: lang.pm:352
+#: network/adsl_consts.pm:620
+#: network/adsl_consts.pm:629
+#: network/adsl_consts.pm:638
+#: network/adsl_consts.pm:647
+#: network/netconnect.pm:42
 #, c-format
 msgid "Netherlands"
 msgstr "Belanda"
 
-#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
+#: crypto.pm:34
+#: crypto.pm:66
+#: lang.pm:353
+#: network/adsl_consts.pm:656
+#: network/adsl_consts.pm:661
+#: network/adsl_consts.pm:666
+#: network/adsl_consts.pm:671
+#: network/adsl_consts.pm:676
+#: network/adsl_consts.pm:681
+#: network/adsl_consts.pm:686
 #, c-format
 msgid "Norway"
 msgstr "Norway"
 
-#: crypto.pm:35 crypto.pm:65 lang.pm:357
+#: crypto.pm:35
+#: crypto.pm:65
+#: lang.pm:357
 #, c-format
 msgid "New Zealand"
 msgstr "New Zealand"
 
-#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
+#: crypto.pm:36
+#: crypto.pm:67
+#: lang.pm:365
+#: network/adsl_consts.pm:693
 #: network/adsl_consts.pm:704
 #, c-format
 msgid "Poland"
 msgstr "Poland"
 
-#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
+#: crypto.pm:37
+#: crypto.pm:68
+#: lang.pm:370
+#: network/adsl_consts.pm:716
 #, c-format
 msgid "Portugal"
 msgstr "Portugal"
 
-#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
+#: crypto.pm:38
+#: crypto.pm:69
+#: lang.pm:376
+#: network/adsl_consts.pm:725
 #, c-format
 msgid "Russia"
 msgstr "Russia"
 
-#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
+#: crypto.pm:39
+#: crypto.pm:73
+#: lang.pm:382
+#: network/adsl_consts.pm:882
 #, c-format
 msgid "Sweden"
 msgstr "Sweden"
 
-#: crypto.pm:40 crypto.pm:70 lang.pm:387
+#: crypto.pm:40
+#: crypto.pm:70
+#: lang.pm:387
 #, c-format
 msgid "Slovakia"
 msgstr "Slovakia"
 
-#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
+#: crypto.pm:41
+#: crypto.pm:76
+#: lang.pm:401
+#: network/adsl_consts.pm:920
 #, c-format
 msgid "Thailand"
 msgstr "Thailand"
 
-#: crypto.pm:42 crypto.pm:75 lang.pm:411
+#: crypto.pm:42
+#: crypto.pm:75
+#: lang.pm:411
 #, c-format
 msgid "Taiwan"
 msgstr "Taiwan"
 
-#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
+#: crypto.pm:43
+#: crypto.pm:71
+#: lang.pm:430
+#: standalone/drakxtv:49
 #, c-format
 msgid "South Africa"
 msgstr "Afrika Selatan"
 
-#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
+#: crypto.pm:77
+#: crypto.pm:112
+#: lang.pm:416
+#: network/netconnect.pm:45
 #, c-format
 msgid "United States"
 msgstr "Amerika Syarikat"
@@ -1936,19 +2281,26 @@ msgstr "direktori dan lokal Baru."
 msgid "New"
 msgstr "Baru"
 
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
+#: diskdrake/dav.pm:61
+#: diskdrake/interactive.pm:454
+#: diskdrake/smbnfs_gtk.pm:74
 #, c-format
 msgid "Unmount"
 msgstr "Nyahlekap"
 
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
+#: diskdrake/dav.pm:62
+#: diskdrake/interactive.pm:451
+#: diskdrake/smbnfs_gtk.pm:75
 #, c-format
 msgid "Mount"
 msgstr "Lekap"
 
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
-#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
+#: diskdrake/dav.pm:64
+#: diskdrake/interactive.pm:446
+#: diskdrake/interactive.pm:670
+#: diskdrake/interactive.pm:689
+#: diskdrake/removable.pm:23
+#: diskdrake/smbnfs_gtk.pm:78
 #, fuzzy, c-format
 msgid "Mount point"
 msgstr "Titik Lekapan"
@@ -1968,13 +2320,16 @@ msgstr "URL"
 msgid "Server: "
 msgstr "Pelayan: "
 
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
-#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
+#: diskdrake/dav.pm:110
+#: diskdrake/interactive.pm:521
+#: diskdrake/interactive.pm:1208
+#: diskdrake/interactive.pm:1286
 #, fuzzy, c-format
 msgid "Mount point: "
 msgstr "Titik Lekapan"
 
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
+#: diskdrake/dav.pm:111
+#: diskdrake/interactive.pm:1293
 #, c-format
 msgid "Options: %s"
 msgstr "Pilihan: %s"
@@ -1987,12 +2342,12 @@ msgstr ""
 #: diskdrake/hd_gtk.pm:95
 #, c-format
 msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
+"If you plan to use aboot, be careful to leave a free space (2048 sectors is enough)\n"
 "at the beginning of the disk"
 msgstr ""
 
-#: diskdrake/hd_gtk.pm:152 help.pm:530
+#: diskdrake/hd_gtk.pm:152
+#: help.pm:530
 #, c-format
 msgid "Wizard"
 msgstr "Wizard"
@@ -2015,8 +2370,11 @@ msgstr "Tetingkap on on"
 msgid "Please click on a partition"
 msgstr "Anda mesti mempunyai partisyen / untuk dipasang."
 
-#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
-#: standalone/drakbackup:3065 standalone/drakbackup:3125
+#: diskdrake/hd_gtk.pm:205
+#: diskdrake/smbnfs_gtk.pm:62
+#: install_steps_gtk.pm:457
+#: standalone/drakbackup:3065
+#: standalone/drakbackup:3125
 #, c-format
 msgid "Details"
 msgstr "Perincian"
@@ -2056,7 +2414,8 @@ msgstr "HFS"
 msgid "Windows"
 msgstr "Tetingkap"
 
-#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
+#: diskdrake/hd_gtk.pm:336
+#: diskdrake/interactive.pm:1223
 #, c-format
 msgid "Empty"
 msgstr "Kosong"
@@ -2066,27 +2425,36 @@ msgstr "Kosong"
 msgid "Filesystem types:"
 msgstr "Jenis Media"
 
-#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
+#: diskdrake/hd_gtk.pm:357
+#: diskdrake/hd_gtk.pm:359
+#: diskdrake/hd_gtk.pm:365
 #, fuzzy, c-format
 msgid "Use ``%s'' instead"
 msgstr "atau digunakan:"
 
-#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
+#: diskdrake/hd_gtk.pm:357
+#: diskdrake/interactive.pm:470
 #, c-format
 msgid "Create"
 msgstr "Cipta"
 
-#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
-#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:108 standalone/harddrake2:117
+#: diskdrake/hd_gtk.pm:357
+#: diskdrake/hd_gtk.pm:365
+#: diskdrake/interactive.pm:447
+#: diskdrake/interactive.pm:623
+#: diskdrake/removable.pm:25
+#: diskdrake/removable.pm:48
+#: standalone/harddrake2:108
+#: standalone/harddrake2:117
 #, c-format
 msgid "Type"
 msgstr "Jenis"
 
 #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
-#: standalone/drakperm:123 standalone/printerdrake:248
+#: diskdrake/hd_gtk.pm:359
+#: diskdrake/interactive.pm:455
+#: standalone/drakperm:123
+#: standalone/printerdrake:248
 #, c-format
 msgid "Delete"
 msgstr "Padam"
@@ -2111,7 +2479,8 @@ msgstr "_Ubahsuai Partisyen"
 msgid "Exit"
 msgstr "Keluar"
 
-#: diskdrake/interactive.pm:256 help.pm:530
+#: diskdrake/interactive.pm:256
+#: help.pm:530
 #, c-format
 msgid "Undo"
 msgstr "Nyahcara"
@@ -2146,7 +2515,8 @@ msgstr "Keluar?"
 msgid "Do you want to save /etc/fstab modifications"
 msgstr ""
 
-#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
+#: diskdrake/interactive.pm:292
+#: install_steps_interactive.pm:340
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr ""
@@ -2159,18 +2529,24 @@ msgid ""
 "Quit anyway?"
 msgstr ""
 
-#: diskdrake/interactive.pm:310 help.pm:530
+#: diskdrake/interactive.pm:310
+#: help.pm:530
 #, fuzzy, c-format
 msgid "Clear all"
 msgstr "Terangkan Semua"
 
-#: diskdrake/interactive.pm:311 help.pm:530
+#: diskdrake/interactive.pm:311
+#: help.pm:530
 #, fuzzy, c-format
 msgid "Auto allocate"
 msgstr "Auto indent"
 
-#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:123
+#: diskdrake/interactive.pm:312
+#: help.pm:530
+#: help.pm:566
+#: help.pm:606
+#: help.pm:855
+#: install_steps_interactive.pm:123
 #, c-format
 msgid "More"
 msgstr "Lagi"
@@ -2192,9 +2568,7 @@ msgstr ""
 
 #: diskdrake/interactive.pm:351
 #, fuzzy, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "To have more partitions, please delete one to be able to create an extended partition"
 msgstr "Kepada"
 
 #: diskdrake/interactive.pm:360
@@ -2212,22 +2586,26 @@ msgstr "Menidakupayakan Supermount"
 msgid "Supermount except for CDROM drives"
 msgstr ""
 
-#: diskdrake/interactive.pm:368 help.pm:530
+#: diskdrake/interactive.pm:368
+#: help.pm:530
 #, fuzzy, c-format
 msgid "Save partition table"
 msgstr "Name=Pelihat Jadual"
 
-#: diskdrake/interactive.pm:369 help.pm:530
+#: diskdrake/interactive.pm:369
+#: help.pm:530
 #, fuzzy, c-format
 msgid "Restore partition table"
 msgstr "Name=Pelihat Jadual"
 
-#: diskdrake/interactive.pm:370 help.pm:530
+#: diskdrake/interactive.pm:370
+#: help.pm:530
 #, fuzzy, c-format
 msgid "Rescue partition table"
 msgstr "Name=Pelihat Jadual"
 
-#: diskdrake/interactive.pm:372 help.pm:530
+#: diskdrake/interactive.pm:372
+#: help.pm:530
 #, fuzzy, c-format
 msgid "Reload partition table"
 msgstr "Name=Pelihat Jadual"
@@ -2237,7 +2615,8 @@ msgstr "Name=Pelihat Jadual"
 msgid "Removable media automounting"
 msgstr "GenericName=Utiliti Media Mudah Alih"
 
-#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
+#: diskdrake/interactive.pm:387
+#: diskdrake/interactive.pm:413
 #, c-format
 msgid "Select file"
 msgstr "Pilih fail"
@@ -2261,7 +2640,8 @@ msgstr ""
 msgid "Detailed information"
 msgstr "Maklumat Pelayan"
 
-#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
+#: diskdrake/interactive.pm:449
+#: diskdrake/interactive.pm:760
 #, c-format
 msgid "Resize"
 msgstr "Ubah saiz"
@@ -2311,12 +2691,14 @@ msgstr "Cipta Queue baru"
 msgid "Start sector: "
 msgstr "Memulakan VNC"
 
-#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
+#: diskdrake/interactive.pm:519
+#: diskdrake/interactive.pm:929
 #, fuzzy, c-format
 msgid "Size in MB: "
 msgstr "Saiz (dalam MB):"
 
-#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
+#: diskdrake/interactive.pm:520
+#: diskdrake/interactive.pm:930
 #, fuzzy, c-format
 msgid "Filesystem type: "
 msgstr "Sistem fail   Jenis"
@@ -2346,8 +2728,7 @@ msgstr "Fail \"%s\" adalah sebuah fail peranti"
 
 #: diskdrake/interactive.pm:607
 #, fuzzy, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+msgid "After changing type of partition %s, all data on this partition will be lost"
 msgstr "on"
 
 #: diskdrake/interactive.pm:619
@@ -2355,7 +2736,8 @@ msgstr "on"
 msgid "Change partition type"
 msgstr "pengisytiharan semula jenis untuk %s"
 
-#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:620
+#: diskdrake/removable.pm:47
 #, fuzzy, c-format
 msgid "Which filesystem do you want?"
 msgstr "Tetapan Xorg mana yang anda hendak?"
@@ -2387,8 +2769,10 @@ msgstr ""
 msgid "Where do you want to mount %s?"
 msgstr "Dimana anda ingin pemuatbut ini dipasang?"
 
-#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
-#: install_interactive.pm:156 install_interactive.pm:188
+#: diskdrake/interactive.pm:712
+#: diskdrake/interactive.pm:791
+#: install_interactive.pm:156
+#: install_interactive.pm:188
 #, fuzzy, c-format
 msgid "Resizing"
 msgstr "Mengulangsaiz Volum Logikal"
@@ -2423,7 +2807,8 @@ msgstr "saiz histogram log\n"
 msgid "New size in MB: "
 msgstr "Berikan saiz ram dalam MB"
 
-#: diskdrake/interactive.pm:802 install_interactive.pm:196
+#: diskdrake/interactive.pm:802
+#: install_interactive.pm:196
 #, fuzzy, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s), \n"
@@ -2435,7 +2820,8 @@ msgstr "Kepada on Tetingkap"
 msgid "Choose an existing RAID to add to"
 msgstr "RAD"
 
-#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862
+#: diskdrake/interactive.pm:845
+#: diskdrake/interactive.pm:862
 #, c-format
 msgid "new"
 msgstr "baru"
@@ -2547,7 +2933,8 @@ msgstr "on"
 msgid "Move files to the new partition"
 msgstr "fail"
 
-#: diskdrake/interactive.pm:1154 standalone/draksambashare:81
+#: diskdrake/interactive.pm:1154
+#: standalone/draksambashare:81
 #: standalone/draksambashare:144
 #, fuzzy, c-format
 msgid "Hide files"
@@ -2585,7 +2972,8 @@ msgstr "-%C10-%C11-%O$t$1 kini dikenali sebagai $2"
 msgid "Partitions have been renumbered: "
 msgstr "Tiada partisyen RAID"
 
-#: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271
+#: diskdrake/interactive.pm:1209
+#: diskdrake/interactive.pm:1271
 #, c-format
 msgid "Device: "
 msgstr "Peranti "
@@ -2605,13 +2993,15 @@ msgstr "Label Bertindan"
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr ""
 
-#: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225
+#: diskdrake/interactive.pm:1216
+#: diskdrake/interactive.pm:1225
 #: diskdrake/interactive.pm:1289
 #, c-format
 msgid "Type: "
 msgstr "Jenis: "
 
-#: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300
+#: diskdrake/interactive.pm:1220
+#: install_steps_gtk.pm:300
 #, c-format
 msgid "Name: "
 msgstr "Nama: "
@@ -2728,7 +3118,8 @@ msgstr "Saiz"
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr ""
 
-#: diskdrake/interactive.pm:1275 network/thirdparty.pm:329
+#: diskdrake/interactive.pm:1275
+#: network/thirdparty.pm:329
 #, c-format
 msgid "Info: "
 msgstr "Maklumat: "
@@ -2768,8 +3159,10 @@ msgstr ""
 msgid "The encryption keys do not match"
 msgstr "Katalaluan root tidak sepadan."
 
-#: diskdrake/interactive.pm:1329 network/netconnect.pm:1070
-#: standalone/drakconnect:419 standalone/drakroam:120
+#: diskdrake/interactive.pm:1329
+#: network/netconnect.pm:1070
+#: standalone/drakconnect:419
+#: standalone/drakroam:120
 #, c-format
 msgid "Encryption key"
 msgstr "Kekunci enkripsi"
@@ -2779,7 +3172,8 @@ msgstr "Kekunci enkripsi"
 msgid "Encryption key (again)"
 msgstr "Kesan kekunci USB sekali lagi"
 
-#: diskdrake/interactive.pm:1332 standalone/drakvpn:1017
+#: diskdrake/interactive.pm:1332
+#: standalone/drakvpn:1017
 #: standalone/drakvpn:1102
 #, fuzzy, c-format
 msgid "Encryption algorithm"
@@ -2795,7 +3189,8 @@ msgstr "Tukar Jenis"
 msgid "Can not login using username %s (bad password?)"
 msgstr ""
 
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
+#: diskdrake/smbnfs_gtk.pm:167
+#: diskdrake/smbnfs_gtk.pm:176
 #, fuzzy, c-format
 msgid "Domain Authentication Required"
 msgstr "Pengesahan Proksi Diperlukan"
@@ -2812,11 +3207,11 @@ msgstr "Satu Bintang"
 
 #: diskdrake/smbnfs_gtk.pm:177
 #, fuzzy, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
+msgid "Please enter your username, password and domain name to access this host."
 msgstr "dan."
 
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614
+#: diskdrake/smbnfs_gtk.pm:179
+#: standalone/drakbackup:3614
 #, c-format
 msgid "Username"
 msgstr "Namapengguna"
@@ -2831,40 +3226,64 @@ msgstr "Pelay_an Pentadbir"
 msgid "Search new servers"
 msgstr "Khidmat Carian Baru"
 
-#: do_pkgs.pm:16 do_pkgs.pm:49
+#: do_pkgs.pm:16
+#: do_pkgs.pm:49
 #, c-format
 msgid "The package %s needs to be installed. Do you want to install it?"
 msgstr ""
 
-#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925
+#: do_pkgs.pm:19
+#: do_pkgs.pm:39
+#: do_pkgs.pm:52
+#: printer/printerdrake.pm:3925
 #, fuzzy, c-format
 msgid "Could not install the %s package!"
 msgstr "Tidak Dapat Membuka Pakej"
 
-#: do_pkgs.pm:24 do_pkgs.pm:57
+#: do_pkgs.pm:24
+#: do_pkgs.pm:57
 #, fuzzy, c-format
 msgid "Mandatory package %s is missing"
 msgstr "Kehilangan Alamat IP"
 
-#: do_pkgs.pm:35 harddrake/sound.pm:274 install_steps_interactive.pm:1317
-#: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
-#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
-#: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
-#: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
-#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4308
-#: printer/printerdrake.pm:5465 standalone/drakTermServ:326
-#: standalone/drakTermServ:1205 standalone/drakTermServ:1266
-#: standalone/drakTermServ:1935 standalone/drakbackup:510
-#: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
-#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
-#: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
-#: standalone/localedrake:43 standalone/scannerdrake:51
+#: do_pkgs.pm:35
+#: harddrake/sound.pm:274
+#: install_steps_interactive.pm:1317
+#: keyboard.pm:388
+#: network/ndiswrapper.pm:95
+#: network/netconnect.pm:472
+#: printer/printerdrake.pm:1416
+#: printer/printerdrake.pm:2494
+#: printer/printerdrake.pm:2609
+#: printer/printerdrake.pm:2930
+#: printer/printerdrake.pm:2937
+#: printer/printerdrake.pm:3924
+#: printer/printerdrake.pm:4188
+#: printer/printerdrake.pm:4308
+#: printer/printerdrake.pm:5465
+#: standalone/drakTermServ:326
+#: standalone/drakTermServ:1205
+#: standalone/drakTermServ:1266
+#: standalone/drakTermServ:1935
+#: standalone/drakbackup:510
+#: standalone/drakbackup:609
+#: standalone/drakboot:133
+#: standalone/drakclock:224
+#: standalone/drakconnect:973
+#: standalone/drakperm:380
+#: standalone/drakperm:390
+#: standalone/drakups:27
+#: standalone/harddrake2:511
+#: standalone/harddrake2:527
+#: standalone/localedrake:43
+#: standalone/scannerdrake:51
 #: standalone/scannerdrake:940
 #, c-format
 msgid "Warning"
 msgstr "Amaran"
 
-#: do_pkgs.pm:35 standalone/harddrake2:527
+#: do_pkgs.pm:35
+#: standalone/harddrake2:527
 #, fuzzy, c-format
 msgid "The following packages need to be installed:\n"
 msgstr "_Personalisasikan pakej perisian untuk dipasang"
@@ -2881,7 +3300,8 @@ msgstr ""
 msgid "Removing packages..."
 msgstr "Membuang Pakej"
 
-#: fs/format.pm:58 fs/format.pm:65
+#: fs/format.pm:58
+#: fs/format.pm:65
 #, fuzzy, c-format
 msgid "Formatting partition %s"
 msgstr "_Ubahsuai Partisyen"
@@ -2896,7 +3316,8 @@ msgstr "%s dan %s adalah fail yang sama"
 msgid "I do not know how to format %s in type %s"
 msgstr "dalam"
 
-#: fs/format.pm:120 fs/format.pm:122
+#: fs/format.pm:120
+#: fs/format.pm:122
 #, fuzzy, c-format
 msgid "%s formatting of %s failed"
 msgstr "[%s (%s): gagal.  Diabaikan]\n"
@@ -2916,12 +3337,14 @@ msgstr "_Ubahsuai Partisyen"
 msgid "mounting partition %s in directory %s failed"
 msgstr "Gagal menyimpan direktori baru dalam %s"
 
-#: fs/mount.pm:80 fs/mount.pm:97
+#: fs/mount.pm:80
+#: fs/mount.pm:97
 #, c-format
 msgid "Checking %s"
 msgstr "Memeriksa %s"
 
-#: fs/mount.pm:113 partition_table.pm:385
+#: fs/mount.pm:113
+#: partition_table.pm:385
 #, fuzzy, c-format
 msgid "error unmounting %s: %s"
 msgstr "Mengnyahlekap initrd: "
@@ -2990,8 +3413,7 @@ msgstr "Semua fail siap."
 #, fuzzy, c-format
 msgid ""
 "Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
+"name of the mounting user is written to mtab so that he can unmount the file\n"
 "system again. This option implies the options noexec, nosuid, and nodev\n"
 "(unless overridden by subsequent options, as in the option line\n"
 "user,exec,dev,suid )."
@@ -3035,8 +3457,7 @@ msgstr "(%d)PELAYAN <<< %s"
 #: fsedit.pm:217
 #, fuzzy, c-format
 msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
+"I can not read the partition table of device %s, it's too corrupted for me :(\n"
 "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
 "The other solution is to not allow DrakX to modify the partition table.\n"
 "(the error is %s)\n"
@@ -3069,30 +3490,27 @@ msgstr "RAD"
 
 #: fsedit.pm:390
 #, c-format
-msgid ""
-"You can not use the LVM Logical Volume for mount point %s since it spans "
-"physical volumes"
+msgid "You can not use the LVM Logical Volume for mount point %s since it spans physical volumes"
 msgstr ""
 
 #: fsedit.pm:392
 #, fuzzy, c-format
 msgid ""
 "You've selected the LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this when the volume spans physical "
-"volumes.\n"
+"The bootloader is not able to handle this when the volume spans physical volumes.\n"
 "You should create a /boot partition first"
 msgstr "RAD"
 
-#: fsedit.pm:396 fsedit.pm:398
+#: fsedit.pm:396
+#: fsedit.pm:398
 #, fuzzy, c-format
 msgid "This directory should remain within the root filesystem"
 msgstr "direktori"
 
-#: fsedit.pm:400 fsedit.pm:402
+#: fsedit.pm:400
+#: fsedit.pm:402
 #, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+msgid "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n"
 msgstr ""
 
 #: fsedit.pm:404
@@ -3110,7 +3528,8 @@ msgstr ""
 msgid "Nothing to do"
 msgstr "-> Hendak buat apa ?"
 
-#: harddrake/data.pm:62 install_any.pm:1712
+#: harddrake/data.pm:62
+#: install_any.pm:1712
 #, c-format
 msgid "Floppy"
 msgstr "Pemacu"
@@ -3120,12 +3539,14 @@ msgstr "Pemacu"
 msgid "Zip"
 msgstr "Zip"
 
-#: harddrake/data.pm:88 install_any.pm:1713
+#: harddrake/data.pm:88
+#: install_any.pm:1713
 #, c-format
 msgid "Hard Disk"
 msgstr "Cakera Keras"
 
-#: harddrake/data.pm:97 install_any.pm:1714
+#: harddrake/data.pm:97
+#: install_any.pm:1714
 #, c-format
 msgid "CDROM"
 msgstr "CDROM"
@@ -3140,7 +3561,8 @@ msgstr "CD/DVD Burner"
 msgid "DVD-ROM"
 msgstr "DVD-ROM"
 
-#: harddrake/data.pm:127 standalone/drakbackup:2055
+#: harddrake/data.pm:127
+#: standalone/drakbackup:2055
 #, fuzzy, c-format
 msgid "Tape"
 msgstr "Pemacu Pita"
@@ -3215,7 +3637,8 @@ msgstr "Peranti Rangkaian"
 msgid "Ethernetcard"
 msgstr ""
 
-#: harddrake/data.pm:282 network/netconnect.pm:493
+#: harddrake/data.pm:282
+#: network/netconnect.pm:493
 #, c-format
 msgid "Modem"
 msgstr "Modem"
@@ -3235,7 +3658,9 @@ msgstr "Memori"
 msgid "AGP controllers"
 msgstr "Pengawal Domain:"
 
-#: harddrake/data.pm:324 help.pm:186 help.pm:855
+#: harddrake/data.pm:324
+#: help.pm:186
+#: help.pm:855
 #: install_steps_interactive.pm:993
 #, c-format
 msgid "Printer"
@@ -3302,8 +3727,11 @@ msgstr "Pengawal Domain:"
 msgid "Bridges and system controllers"
 msgstr "Konfigurasi sistem dan pemonitoran"
 
-#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
-#: install_steps_interactive.pm:953 standalone/keyboarddrake:29
+#: harddrake/data.pm:449
+#: help.pm:855
+#: install_steps_interactive.pm:119
+#: install_steps_interactive.pm:953
+#: standalone/keyboarddrake:29
 #, c-format
 msgid "Keyboard"
 msgstr "Papan Kekunci"
@@ -3313,7 +3741,9 @@ msgstr "Papan Kekunci"
 msgid "Tablet and touchscreen"
 msgstr "Fail %s dan %s berbeza\n"
 
-#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986
+#: harddrake/data.pm:471
+#: help.pm:855
+#: install_steps_interactive.pm:986
 #, c-format
 msgid "Mouse"
 msgstr "Tetikus"
@@ -3328,7 +3758,8 @@ msgstr "UPS"
 msgid "Scanner"
 msgstr "Pengimbas"
 
-#: harddrake/data.pm:504 standalone/harddrake2:476
+#: harddrake/data.pm:504
+#: standalone/harddrake2:476
 #, fuzzy, c-format
 msgid "Unknown/Others"
 msgstr "Pencetak Tidak Diketahui"
@@ -3338,7 +3769,8 @@ msgstr "Pencetak Tidak Diketahui"
 msgid "cpu # "
 msgstr "cpu # "
 
-#: harddrake/sound.pm:192 standalone/drakconnect:162
+#: harddrake/sound.pm:192
+#: standalone/drakconnect:162
 #: standalone/drakconnect:637
 #, fuzzy, c-format
 msgid "Please Wait... Applying the configuration"
@@ -3353,9 +3785,7 @@ msgstr "Tiada jurupacu dijumpai"
 
 #: harddrake/sound.pm:229
 #, fuzzy, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\""
 msgstr "tidak"
 
 #: harddrake/sound.pm:235
@@ -3365,12 +3795,10 @@ msgstr "Tetapan kad bunyi"
 
 #: harddrake/sound.pm:237
 #, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+msgid "Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s)."
 msgstr ""
 
-#. -PO: here the first %s is either "OSS" or "ALSA", 
+#. -PO: here the first %s is either "OSS" or "ALSA",
 #. -PO: the second %s is the name of the current driver
 #. -PO: and the third %s is the name of the default driver
 #: harddrake/sound.pm:242
@@ -3378,31 +3806,28 @@ msgstr ""
 msgid ""
 "\n"
 "\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")"
 msgstr "default"
 
 #: harddrake/sound.pm:244
 #, fuzzy, c-format
 msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
+"OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.\n"
 "What's more, OSS drivers all reinvent the wheel.\n"
 "\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture which\n"
 "supports quite a large range of ISA, USB and PCI cards.\n"
 "\n"
 "It also provides a much higher API than OSS.\n"
 "\n"
 "To use alsa, one can either use:\n"
 "- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"- the new ALSA api that provides many enhanced features but requires using the ALSA library.\n"
 msgstr "Buka Bunyi Sistem on asas dan Lanjutan Bunyi USB dan"
 
-#: harddrake/sound.pm:258 harddrake/sound.pm:346 standalone/drakups:146
+#: harddrake/sound.pm:258
+#: harddrake/sound.pm:346
+#: standalone/drakups:146
 #, c-format
 msgid "Driver:"
 msgstr "Pemacu :"
@@ -3429,9 +3854,7 @@ msgstr "Pustaka kriptografi sumber terbuka."
 
 #: harddrake/sound.pm:283
 #, fuzzy, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"."
 msgstr "tidak."
 
 #: harddrake/sound.pm:286
@@ -3444,7 +3867,9 @@ msgstr "Tiada jurupacu dijumpai"
 msgid "There's no known driver for your sound card (%s)"
 msgstr "tidak"
 
-#: harddrake/sound.pm:291 network/netconnect.pm:98 network/netconnect.pm:833
+#: harddrake/sound.pm:291
+#: network/netconnect.pm:98
+#: network/netconnect.pm:833
 #, fuzzy, c-format
 msgid "Unknown driver"
 msgstr "Cekera jurupacu"
@@ -3498,20 +3923,23 @@ msgstr "Membaca cakera jurupacu..."
 #: harddrake/sound.pm:341
 #, fuzzy, c-format
 msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
+"If you really think that you know which driver is the right one for your card\n"
 "you can pick one in the above list.\n"
 "\n"
 "The current driver for your \"%s\" sound card is \"%s\" "
 msgstr "dalam "
 
-#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
+#: harddrake/v4l.pm:12
+#: standalone/net_applet:64
+#: standalone/net_applet:65
 #: standalone/net_applet:67
 #, fuzzy, c-format
 msgid "Auto-detect"
 msgstr "Kesan a&uto"
 
-#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
+#: harddrake/v4l.pm:85
+#: harddrake/v4l.pm:263
+#: harddrake/v4l.pm:296
 #, fuzzy, c-format
 msgid "Unknown|Generic"
 msgstr "Ralat umum"
@@ -3529,10 +3957,8 @@ msgstr "Entah"
 #: harddrake/v4l.pm:404
 #, fuzzy, c-format
 msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed."
 msgstr "dan."
 
 #: harddrake/v4l.pm:407
@@ -3579,8 +4005,11 @@ msgid ""
 "button will reboot your computer."
 msgstr "dalam off."
 
-#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:738 standalone/drakautoinst:214
+#: help.pm:14
+#: install_steps_gtk.pm:539
+#: install_steps_interactive.pm:92
+#: install_steps_interactive.pm:738
+#: standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
 msgstr "Terima"
@@ -3590,8 +4019,7 @@ msgstr "Terima"
 msgid ""
 "GNU/Linux is a multi-user system which means each user can have his or her\n"
 "own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
+"system administrator, the users you add at this point will not be authorized\n"
 "to change anything except their own files and their own configurations,\n"
 "protecting the system from unintentional or malicious changes which could\n"
 "impact on the system as a whole. You'll have to create at least one regular\n"
@@ -3624,24 +4052,31 @@ msgid ""
 "you're interested in that feature (and do not care much about local\n"
 "security), choose the desired user and window manager, then click on\n"
 "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"pengguna pengguna fail dan on pengguna fail dan on pengguna dalam dan A "
-"pengguna dalam dan pengguna default dan pengguna tidak fail on Tambah "
-"pengguna default pengguna default pengguna dalam dan lokal pengguna dan "
-"dalam."
+msgstr "pengguna pengguna fail dan on pengguna fail dan on pengguna dalam dan A pengguna dalam dan pengguna default dan pengguna tidak fail on Tambah pengguna default pengguna default pengguna dalam dan lokal pengguna dan dalam."
 
-#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
+#: help.pm:51
+#: printer/printerdrake.pm:1866
+#: printer/printerdrake.pm:1987
 #: standalone/draksambashare:60
 #, c-format
 msgid "User name"
 msgstr "Nama user"
 
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
-#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
-#: network/thirdparty.pm:383 printer/printerdrake.pm:3861
-#: standalone/drakTermServ:384 standalone/drakbackup:4074
-#: standalone/drakbackup:4168 standalone/drakbackup:4185
-#: standalone/drakbackup:4203 ugtk2.pm:490
+#: help.pm:51
+#: help.pm:431
+#: help.pm:681
+#: install_steps_gtk.pm:237
+#: install_steps_gtk.pm:682
+#: interactive.pm:436
+#: interactive/newt.pm:321
+#: network/thirdparty.pm:383
+#: printer/printerdrake.pm:3861
+#: standalone/drakTermServ:384
+#: standalone/drakbackup:4074
+#: standalone/drakbackup:4168
+#: standalone/drakbackup:4185
+#: standalone/drakbackup:4203
+#: ugtk2.pm:490
 #, c-format
 msgid "Next"
 msgstr "Berikut"
@@ -3704,8 +4139,7 @@ msgstr "on on dan."
 #, fuzzy, c-format
 msgid ""
 "It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
+"There are thousands of packages available for Mandriva Linux, and to make it\n"
 "simpler to manage, they have been placed into groups of similar\n"
 "applications.\n"
 "\n"
@@ -3769,33 +4203,41 @@ msgstr ""
 " asas dan\n"
 " jumlah jumlah dalam."
 
-#: help.pm:146 share/compssUsers.pl:24
+#: help.pm:146
+#: share/compssUsers.pl:24
 #, c-format
 msgid "Workstation"
 msgstr "StesyenKerja"
 
-#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
+#: help.pm:146
+#: share/compssUsers.pl:65
+#: share/compssUsers.pl:167
 #: share/compssUsers.pl:169
 #, c-format
 msgid "Development"
 msgstr "Pembangunan"
 
-#: help.pm:146 share/compssUsers.pl:145
+#: help.pm:146
+#: share/compssUsers.pl:145
 #, fuzzy, c-format
 msgid "Graphical Environment"
 msgstr "Pembolehubah Persekitaran"
 
-#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646
+#: help.pm:146
+#: install_steps_gtk.pm:235
+#: install_steps_interactive.pm:646
 #, fuzzy, c-format
 msgid "Individual package selection"
 msgstr "Pemilihan Pakej Satu Persatu"
 
-#: help.pm:146 help.pm:588
+#: help.pm:146
+#: help.pm:588
 #, c-format
 msgid "Upgrade"
 msgstr "Naik Taraf"
 
-#: help.pm:146 install_steps_interactive.pm:604
+#: help.pm:146
+#: install_steps_interactive.pm:604
 #, fuzzy, c-format
 msgid "With X"
 msgstr "%s dengan %s"
@@ -3828,8 +4270,7 @@ msgid ""
 "services at boot time. Even if they are safe and have no known issues at\n"
 "the time the distribution was shipped, it is entirely possible that\n"
 "security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
+"finalized. If you do not know what a particular service is supposed to do or\n"
 "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
 "the listed services and they will be started automatically at boot time. !!\n"
 "\n"
@@ -3848,17 +4289,35 @@ msgid ""
 "such a floppy."
 msgstr "dan on on default mula dan tidak dan amaran on."
 
-#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:946
-#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
-#: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
+#: help.pm:180
+#: help.pm:285
+#: help.pm:313
+#: help.pm:444
+#: install_any.pm:946
+#: interactive.pm:161
+#: modules/interactive.pm:71
+#: standalone/drakbackup:2613
+#: standalone/draksec:54
+#: standalone/harddrake2:332
+#: ugtk2.pm:898
+#: wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "Tidak"
 
-#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:946 interactive.pm:161
-#: modules/interactive.pm:71 printer/printerdrake.pm:883
-#: printer/printerdrake.pm:898 standalone/drakbackup:2613
-#: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
+#: help.pm:180
+#: help.pm:285
+#: help.pm:444
+#: install_any.pm:946
+#: interactive.pm:161
+#: modules/interactive.pm:71
+#: printer/printerdrake.pm:883
+#: printer/printerdrake.pm:898
+#: standalone/drakbackup:2613
+#: standalone/draksec:55
+#: standalone/harddrake2:331
+#: ugtk2.pm:898
+#: wizards.pm:156
 #, c-format
 msgid "Yes"
 msgstr "Ya"
@@ -3877,9 +4336,14 @@ msgid ""
 "manual is similar to the one used during installation."
 msgstr "on on."
 
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
-#: standalone/drakbackup:2437 standalone/drakbackup:2441
-#: standalone/drakbackup:2445 standalone/drakbackup:2449
+#: help.pm:186
+#: help.pm:566
+#: help.pm:855
+#: install_steps_gtk.pm:595
+#: standalone/drakbackup:2437
+#: standalone/drakbackup:2441
+#: standalone/drakbackup:2445
+#: standalone/drakbackup:2449
 #: standalone/drakroam:227
 #, c-format
 msgid "Configure"
@@ -3900,8 +4364,7 @@ msgid ""
 "it is safer to leave the default behavior.\n"
 "\n"
 "!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
+"server: you probably do not want to start any services which you do not need.\n"
 "Please remember that some services can be dangerous if they're enabled on a\n"
 "server. In general, select only those services you really need. !!"
 msgstr "mula on dan default mula on Masuk!"
@@ -3921,11 +4384,10 @@ msgid ""
 "work, you must have a working Internet connection. We recommend that you\n"
 "choose a time server located near you. This option actually installs a time\n"
 "server which can be used by other machines on your local network as well."
-msgstr ""
-"dalam Masa dan on lokal dan dalam hos Tetingkap on Internet Internet on "
-"lokal."
+msgstr "dalam Masa dan on lokal dan dalam hos Tetingkap on Internet Internet on lokal."
 
-#: help.pm:217 install_steps_interactive.pm:888
+#: help.pm:217
+#: install_steps_interactive.pm:888
 #, fuzzy, c-format
 msgid "Hardware clock set to GMT"
 msgstr "Mengsinkronisasikan jam perkakasan ke masa sistem"
@@ -4109,10 +4571,8 @@ msgid ""
 "to store your data or to install new software.\n"
 "\n"
 " * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
+"your hard drive and replace them with your new Mandriva Linux system, choose\n"
+"this option. Be careful, because you will not be able to undo this operation\n"
 "after you confirm.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be deleted. !!\n"
@@ -4141,7 +4601,8 @@ msgstr ""
 " on\n"
 " secara manual dan siap dan on dalam."
 
-#: help.pm:374 install_interactive.pm:95
+#: help.pm:374
+#: install_interactive.pm:95
 #, fuzzy, c-format
 msgid "Use free space"
 msgstr "Tiada ruang bebas"
@@ -4151,7 +4612,8 @@ msgstr "Tiada ruang bebas"
 msgid "Use existing partition"
 msgstr "Guna partisyen sedia ada (onpart)"
 
-#: help.pm:374 install_interactive.pm:137
+#: help.pm:374
+#: install_interactive.pm:137
 #, fuzzy, c-format
 msgid "Use the free space on the Windows partition"
 msgstr "on Tetingkap"
@@ -4166,7 +4628,8 @@ msgstr "Masukkan cakera liut"
 msgid "Remove Windows"
 msgstr "Nama Pengguna _Windows:"
 
-#: help.pm:374 install_interactive.pm:228
+#: help.pm:374
+#: install_interactive.pm:228
 #, fuzzy, c-format
 msgid "Custom disk partitioning"
 msgstr "Tetapan Pempartisyenan Cakera"
@@ -4221,17 +4684,20 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "Janakan cakera liut Auto Pasang"
 
-#: help.pm:409 install_steps_interactive.pm:1343
+#: help.pm:409
+#: install_steps_interactive.pm:1343
 #, fuzzy, c-format
 msgid "Replay"
 msgstr "Main semula Log"
 
-#: help.pm:409 install_steps_interactive.pm:1343
+#: help.pm:409
+#: install_steps_interactive.pm:1343
 #, c-format
 msgid "Automated"
 msgstr ""
 
-#: help.pm:409 install_steps_interactive.pm:1346
+#: help.pm:409
+#: install_steps_interactive.pm:1346
 #, fuzzy, c-format
 msgid "Save packages selection"
 msgstr "Pemilihan Pakej Satu Persatu"
@@ -4245,8 +4711,7 @@ msgid ""
 "\n"
 "Please note that it's not necessary to reformat all pre-existing\n"
 "partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to reformat\n"
 "partitions containing data that you wish to keep (typically \"/home\").\n"
 "\n"
 "Please be careful when selecting partitions. After the formatting is\n"
@@ -4262,11 +4727,17 @@ msgid ""
 "bad blocks on the disk."
 msgstr "fail on dan on on on on."
 
-#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
-#: interactive/newt.pm:318 printer/printerdrake.pm:3859
-#: standalone/drakTermServ:363 standalone/drakbackup:4037
-#: standalone/drakbackup:4073 standalone/drakbackup:4184
-#: standalone/drakbackup:4199 ugtk2.pm:488
+#: help.pm:431
+#: install_steps_gtk.pm:392
+#: interactive.pm:437
+#: interactive/newt.pm:318
+#: printer/printerdrake.pm:3859
+#: standalone/drakTermServ:363
+#: standalone/drakbackup:4037
+#: standalone/drakbackup:4073
+#: standalone/drakbackup:4184
+#: standalone/drakbackup:4199
+#: ugtk2.pm:488
 #, c-format
 msgid "Previous"
 msgstr "Terdahulu"
@@ -4287,7 +4758,9 @@ msgid ""
 "the selected package(s), or \"%s\" to abort."
 msgstr "Kepada Internet Internet A dan dan."
 
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
+#: help.pm:444
+#: help.pm:588
+#: install_steps_gtk.pm:391
 #: install_steps_interactive.pm:157
 #, c-format
 msgid "Install"
@@ -4458,8 +4931,7 @@ msgstr ""
 #, fuzzy, c-format
 msgid ""
 "\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
+"click on the \"%s\" button and choose another. If your country is not in the\n"
 "list shown, click on the \"%s\" button to get the complete country list."
 msgstr "dalam on dan dalam."
 
@@ -4479,8 +4951,7 @@ msgid ""
 "the file system, you should use this option.\n"
 "\n"
 " * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
+"currently installed on your Mandriva Linux system. Your current partitioning\n"
 "scheme and user data will not be altered. Most of the other configuration\n"
 "steps remain available and are similar to a standard installation.\n"
 "\n"
@@ -4530,8 +5001,7 @@ msgid ""
 "\n"
 "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
 "cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
+"still under development. For that reason, Mandriva Linux's use of UTF-8 will\n"
 "depend on the user's choices:\n"
 "\n"
 " * If you choose a language with a strong legacy encoding (latin1\n"
@@ -4556,9 +5026,7 @@ msgid ""
 "launch the \"localedrake\" command as \"root\" to change the language used\n"
 "by the entire system. Running the command as a regular user will only\n"
 "change the language settings for that particular user."
-msgstr ""
-"dan dalam dalam dan on on dan Sepanyol on English default dalam dan dalam "
-"Lanjutan tunggal on pengguna pengguna."
+msgstr "dan dalam dalam dan on on dan Sepanyol on English default dalam dan dalam Lanjutan tunggal on pengguna pengguna."
 
 #: help.pm:647
 #, c-format
@@ -4639,8 +5107,7 @@ msgid ""
 "characters long. Never write down the \"root\" password -- it makes it far\n"
 "too easy to compromise your system.\n"
 "\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
+"One caveat: do not make the password too long or too complicated because you\n"
 "must be able to remember it!\n"
 "\n"
 "The password will not be displayed on screen as you type it. To reduce the\n"
@@ -4658,9 +5125,7 @@ msgid ""
 "If you happen to have problems with remembering passwords, or if your\n"
 "computer will never be connected to the Internet and you absolutely trust\n"
 "everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"dan pengguna dan on Masuk ralat dan on dan Tidak sekali on dalam Kepada "
-"ralat ralat LDAP NIS Tetingkap Domain tiada."
+msgstr "dan pengguna dan on Masuk ralat dan on dan Tidak sekali on dalam Kepada ralat ralat LDAP NIS Tetingkap Domain tiada."
 
 #: help.pm:722
 #, fuzzy, c-format
@@ -4683,8 +5148,7 @@ msgid ""
 "\n"
 "If DrakX can not determine where to place the boot sector, it'll ask you\n"
 "where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
+"Choosing \"%s\" will not install any boot loader. Use this option only if you\n"
 "know what you're doing."
 msgstr ""
 "dan dan\n"
@@ -4728,7 +5192,9 @@ msgstr ""
 msgid "pdq"
 msgstr "pdq"
 
-#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
+#: help.pm:765
+#: printer/cups.pm:117
+#: printer/data.pm:129
 #, c-format
 msgid "CUPS"
 msgstr "CUPS"
@@ -4767,7 +5233,9 @@ msgid ""
 "system, you can click on the button and choose a different driver."
 msgstr "on on on dan."
 
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1020
+#: help.pm:788
+#: help.pm:855
+#: install_steps_interactive.pm:1020
 #: install_steps_interactive.pm:1037
 #, fuzzy, c-format
 msgid "Sound card"
@@ -4819,8 +5287,7 @@ msgid ""
 "\n"
 " * \"%s\": if you wish to configure your Internet or local network access,\n"
 "you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
+"Mandriva Linux Control Center after the installation has finished to benefit\n"
 "from full in-line help.\n"
 "\n"
 " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
@@ -4859,13 +5326,16 @@ msgstr ""
 "\n"
 "."
 
-#: help.pm:855 install_steps_interactive.pm:884
-#: install_steps_interactive.pm:979 standalone/drakclock:100
+#: help.pm:855
+#: install_steps_interactive.pm:884
+#: install_steps_interactive.pm:979
+#: standalone/drakclock:100
 #, c-format
 msgid "Timezone"
 msgstr "Zonmasa"
 
-#: help.pm:855 install_steps_interactive.pm:1053
+#: help.pm:855
+#: install_steps_interactive.pm:1053
 #, fuzzy, c-format
 msgid "TV card"
 msgstr "Kad TV"
@@ -4880,34 +5350,44 @@ msgstr "Kad Video"
 msgid "Graphical Interface"
 msgstr "Konfigurasi (X) Antaramuka Grafikal"
 
-#: help.pm:855 install_any.pm:1735 install_steps_interactive.pm:1071
+#: help.pm:855
+#: install_any.pm:1735
+#: install_steps_interactive.pm:1071
 #: standalone/drakbackup:2040
 #, c-format
 msgid "Network"
 msgstr "Rangkaian"
 
-#: help.pm:855 install_steps_interactive.pm:1083
+#: help.pm:855
+#: install_steps_interactive.pm:1083
 #, fuzzy, c-format
 msgid "Proxies"
 msgstr "Tetapkan proksi"
 
-#: help.pm:855 install_steps_interactive.pm:1094
+#: help.pm:855
+#: install_steps_interactive.pm:1094
 #, c-format
 msgid "Security Level"
 msgstr "Tahap Keselamatan"
 
-#: help.pm:855 install_steps_interactive.pm:1108 network/drakfirewall.pm:189
+#: help.pm:855
+#: install_steps_interactive.pm:1108
+#: network/drakfirewall.pm:189
 #, c-format
 msgid "Firewall"
 msgstr "Firewall"
 
-#: help.pm:855 install_steps_interactive.pm:1124
+#: help.pm:855
+#: install_steps_interactive.pm:1124
 #, fuzzy, c-format
 msgid "Bootloader"
 msgstr "PemuatBoot"
 
-#: help.pm:855 install_steps_interactive.pm:1137 services.pm:114
-#: services.pm:157 services.pm:193
+#: help.pm:855
+#: install_steps_interactive.pm:1137
+#: services.pm:114
+#: services.pm:157
+#: services.pm:193
 #, c-format
 msgid "Services"
 msgstr "Perkhidmatan"
@@ -4944,10 +5424,7 @@ msgstr "Terdahulu"
 
 #: install2.pm:115
 #, fuzzy, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+msgid "Can not access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)"
 msgstr "fail dalam dalam"
 
 #: install2.pm:169
@@ -4970,9 +5447,12 @@ msgid ""
 "Do you have a supplementary installation media to configure?"
 msgstr "Anda pasti mahu keluar?"
 
-#: install_any.pm:423 printer/printerdrake.pm:3188
-#: printer/printerdrake.pm:3195 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
+#: install_any.pm:423
+#: printer/printerdrake.pm:3188
+#: printer/printerdrake.pm:3195
+#: standalone/scannerdrake:182
+#: standalone/scannerdrake:190
+#: standalone/scannerdrake:241
 #: standalone/scannerdrake:248
 #, c-format
 msgid "CD-ROM"
@@ -4998,7 +5478,9 @@ msgstr "Imej NFS"
 msgid "Insert the CD 1 again"
 msgstr "Sila cuba lagi"
 
-#: install_any.pm:479 network/netconnect.pm:862 standalone/drakbackup:114
+#: install_any.pm:479
+#: network/netconnect.pm:862
+#: standalone/drakbackup:114
 #, c-format
 msgid "No device found"
 msgstr "Tiada peranti dijumpai"
@@ -5013,7 +5495,8 @@ msgstr "Eject CD"
 msgid "Unable to mount CD-ROM"
 msgstr "Utiliti untuk mencipta sistemfail CD-ROM termampat"
 
-#: install_any.pm:522 install_any.pm:543
+#: install_any.pm:522
+#: install_any.pm:543
 #, fuzzy, c-format
 msgid "URL of the mirror?"
 msgstr "Pengendali URL..."
@@ -5033,16 +5516,15 @@ msgstr ""
 msgid "Hostname of the NFS mount ?"
 msgstr "Titik lekapan NFS"
 
-#: install_any.pm:528 standalone/draknfs:288
+#: install_any.pm:528
+#: standalone/draknfs:288
 #, c-format
 msgid "Directory"
 msgstr "Direktori"
 
 #: install_any.pm:581
 #, fuzzy, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
+msgid "Can't find a package list file on this mirror. Make sure the location is correct."
 msgstr "Ralat pada baris %d: %s"
 
 #: install_any.pm:658
@@ -5064,8 +5546,7 @@ msgstr "Mencari pakej untuk dinaiktaraf..."
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done."
 msgstr ""
 
 #: install_any.pm:794
@@ -5098,7 +5579,8 @@ msgid ""
 "Do you really want to remove these packages?\n"
 msgstr ""
 
-#: install_any.pm:1396 partition_table.pm:597
+#: install_any.pm:1396
+#: partition_table.pm:597
 #, fuzzy, c-format
 msgid "Error reading file %s"
 msgstr "ralat membaca fail"
@@ -5115,12 +5597,8 @@ msgstr "hakmilik %s kekal sebagai %s\n"
 
 #: install_any.pm:1672
 #, fuzzy, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ralat berlaku - tiada peranti dijumpai yang sah dimana untuk mencipta sistem "
-"fail. Sila periksa perkakasan anda untuk mengenalpasti punca masalah ini."
+msgid "An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem"
+msgstr "Ralat berlaku - tiada peranti dijumpai yang sah dimana untuk mencipta sistem fail. Sila periksa perkakasan anda untuk mengenalpasti punca masalah ini."
 
 #: install_any.pm:1716
 #, c-format
@@ -5205,7 +5683,8 @@ msgid ""
 "Continue anyway?"
 msgstr ""
 
-#: install_interactive.pm:70 install_steps.pm:218
+#: install_interactive.pm:70
+#: install_steps.pm:218
 #, fuzzy, c-format
 msgid "You must have a FAT partition mounted in /boot/efi"
 msgstr "terpasang dalam"
@@ -5274,10 +5753,7 @@ msgstr "Kemasukan Tidak Sah bagi Saiz Partisyen"
 
 #: install_interactive.pm:163
 #, fuzzy, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
+msgid "Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandriva Linux installation."
 msgstr "Tetingkap Tetingkap ulanghidup."
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
@@ -5384,136 +5860,89 @@ msgstr "Mematikan daemon palam rangkaian: "
 msgid ""
 "Introduction\n"
 "\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
+"The operating system and the different components available in the Mandriva Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
 "system and the different components of the Mandriva Linux distribution.\n"
 "\n"
 "\n"
 "1. License Agreement\n"
 "\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
+"Please read this document carefully. This document is a license agreement between you and  \n"
 "Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
+"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this License. \n"
+"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
 "the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
+"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
+"with the terms and conditions of this License is void and will terminate your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all copies of the \n"
 "Software Products.\n"
 "\n"
 "\n"
 "2. Limited Warranty\n"
 "\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
+"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n"
 "extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
+"Mandriva S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or inability to use the Software \n"
+"Products, even if Mandriva S.A. has been advised of the possibility or occurrence of such \n"
 "damages.\n"
 "\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
+"\n"
+"To the extent permitted by law, Mandriva S.A. or its distributors will, in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
+"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
+"of the possession and use of software components or arising out of  downloading software components \n"
+"from one of Mandriva Linux sites  which are prohibited or restricted in some countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
 "included in the Software Products.\n"
 "\n"
 "\n"
 "3. The GPL License and Related Licenses\n"
 "\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
+"The Software Products consist of components created by different persons or entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
+"and conditions of the license agreement for each component before using any component. Any question \n"
+"on a component license should be addressed to the component author and not to Mandriva.\n"
+"The programs developed by Mandriva S.A. are governed by the GPL License. Documentation written \n"
+"by Mandriva S.A. is governed by a specific license. Please refer to the documentation for \n"
 "further details.\n"
 "\n"
 "\n"
 "4. Intellectual Property Rights\n"
 "\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
+"All rights to the components of the Software Products belong to their respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software programs.\n"
+"Mandriva S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
 "parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
+"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of Mandriva S.A.  \n"
 "\n"
 "\n"
 "5. Governing Laws \n"
 "\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
+"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
 "agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
+"The terms and conditions of this License are governed by the Laws of France.\n"
+"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
 "For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Pengenalan dan dalam dan dan dan A dalam dan dan dalam dan dan dan tidak A "
-"dalam tidak dan dan keluar A A dalam tidak keluar dan keluar dalam lokal "
-"dalam dan dan Umum dan A Dokumentasi A Kanan: dan dan A dalam dan dan A dan "
-"Perancis on keluar Perancis on A"
+msgstr "Pengenalan dan dalam dan dan dan A dalam dan dan dalam dan dan dan tidak A dalam tidak dan dan keluar A A dalam tidak keluar dan keluar dalam lokal dalam dan dan Umum dan A Dokumentasi A Kanan: dan dan A dalam dan dan A dan Perancis on keluar Perancis on A"
 
 #: install_messages.pm:90
 #, c-format
 msgid ""
 "Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
+"Software included may be covered by patents in your country. For example, the\n"
 "MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
+"http://www.mp3licensing.com for more details). If you are unsure if a patent\n"
 "may be applicable to you, check your local laws."
 msgstr ""
 
@@ -5559,8 +5988,7 @@ msgid ""
 "Remove the boot media and press return to reboot.\n"
 "\n"
 "\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
+"For information on fixes which are available for this release of Mandriva Linux,\n"
 "consult the Errata available from:\n"
 "\n"
 "\n"
@@ -5581,11 +6009,11 @@ msgstr "Titik lekapan tidak sah"
 msgid ""
 "Some important packages did not get installed properly.\n"
 "Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
+"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm\"\n"
 msgstr "on"
 
-#: install_steps_auto_install.pm:75 install_steps_stdio.pm:27
+#: install_steps_auto_install.pm:75
+#: install_steps_stdio.pm:27
 #, fuzzy, c-format
 msgid "Entering step `%s'\n"
 msgstr "Langkah 1: Pengenalan"
@@ -5594,17 +6022,18 @@ msgstr "Langkah 1: Pengenalan"
 #, c-format
 msgid ""
 "Your system is low on resources. You may have some problem installing\n"
-"Mandriva Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
+"Mandriva Linux. If that occurs, you can try a text install instead. For this,\n"
 "press `F1' when booting on CDROM, then enter `text'."
 msgstr ""
 
-#: install_steps_gtk.pm:211 install_steps_interactive.pm:628
+#: install_steps_gtk.pm:211
+#: install_steps_interactive.pm:628
 #, fuzzy, c-format
 msgid "Package Group Selection"
 msgstr "Pemilihan Kumpulan Pakej"
 
-#: install_steps_gtk.pm:254 install_steps_interactive.pm:571
+#: install_steps_gtk.pm:254
+#: install_steps_interactive.pm:571
 #, fuzzy, c-format
 msgid "Total size: %d / %d MB"
 msgstr "Saiz dicadangkan (MB):"
@@ -5639,7 +6068,8 @@ msgstr ""
 msgid "You can not select/unselect this package"
 msgstr ""
 
-#: install_steps_gtk.pm:340 network/thirdparty.pm:329
+#: install_steps_gtk.pm:340
+#: network/thirdparty.pm:329
 #, fuzzy, c-format
 msgid "due to missing %s"
 msgstr "kerana kehilangan %s"
@@ -5661,9 +6091,7 @@ msgstr "untuk menyimpan %s"
 
 #: install_steps_gtk.pm:348
 #, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
+msgid "You can not select this package as there is not enough space left to install it"
 msgstr ""
 
 #: install_steps_gtk.pm:351
@@ -5722,12 +6150,14 @@ msgstr "Pemilihan Pakej Satu Persatu"
 msgid "Minimal install"
 msgstr "Tetingkap Pemasangan"
 
-#: install_steps_gtk.pm:414 install_steps_interactive.pm:490
+#: install_steps_gtk.pm:414
+#: install_steps_interactive.pm:490
 #, fuzzy, c-format
 msgid "Choose the packages you want to install"
 msgstr "Dimana anda ingin pemuatbut ini dipasang?"
 
-#: install_steps_gtk.pm:431 install_steps_interactive.pm:714
+#: install_steps_gtk.pm:431
+#: install_steps_interactive.pm:714
 #, c-format
 msgid "Installing"
 msgstr "Memasang"
@@ -5752,22 +6182,24 @@ msgstr ""
 msgid "%d packages"
 msgstr "    Pakej"
 
-#: install_steps_gtk.pm:539 install_steps_interactive.pm:92
+#: install_steps_gtk.pm:539
+#: install_steps_interactive.pm:92
 #: install_steps_interactive.pm:738
 #, c-format
 msgid "Refuse"
 msgstr "Tolak"
 
-#: install_steps_gtk.pm:543 install_steps_interactive.pm:742
+#: install_steps_gtk.pm:543
+#: install_steps_interactive.pm:742
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n"
 "If you do not have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
 
-#: install_steps_gtk.pm:556 install_steps_interactive.pm:753
+#: install_steps_gtk.pm:556
+#: install_steps_interactive.pm:753
 #, fuzzy, c-format
 msgid "There was an error ordering packages:"
 msgstr ""
@@ -5775,7 +6207,8 @@ msgstr ""
 "\n"
 "Keluar."
 
-#: install_steps_gtk.pm:558 install_steps_interactive.pm:757
+#: install_steps_gtk.pm:558
+#: install_steps_interactive.pm:757
 #, fuzzy, c-format
 msgid "There was an error installing packages:"
 msgstr ""
@@ -5783,18 +6216,22 @@ msgstr ""
 "\n"
 "Keluar."
 
-#: install_steps_gtk.pm:560 install_steps_interactive.pm:753
+#: install_steps_gtk.pm:560
+#: install_steps_interactive.pm:753
 #: install_steps_interactive.pm:757
 #, fuzzy, c-format
 msgid "Go on anyway?"
 msgstr "[%s (%s): 1 halaman pada 1 helaian]\n"
 
-#: install_steps_gtk.pm:582 install_steps_interactive.pm:939 steps.pm:30
+#: install_steps_gtk.pm:582
+#: install_steps_interactive.pm:939
+#: steps.pm:30
 #, c-format
 msgid "Summary"
 msgstr "Ringkasan"
 
-#: install_steps_gtk.pm:605 install_steps_interactive.pm:935
+#: install_steps_gtk.pm:605
+#: install_steps_interactive.pm:935
 #: install_steps_interactive.pm:1084
 #, fuzzy, c-format
 msgid "not configured"
@@ -5810,10 +6247,8 @@ msgstr ""
 #: install_steps_gtk.pm:677
 #, c-format
 msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
+"You have the option to copy the contents of the CDs onto the hard drive before installation.\n"
+"It will then continue from the hard drive and the packages will remain available once the system is fully installed."
 msgstr ""
 
 #: install_steps_gtk.pm:679
@@ -5871,12 +6306,14 @@ msgstr "Sila pilih jenis logmasuk anda:"
 msgid "Mouse choice"
 msgstr "Pilihan Tidak Sah"
 
-#: install_steps_interactive.pm:205 standalone/mousedrake:46
+#: install_steps_interactive.pm:205
+#: standalone/mousedrake:46
 #, fuzzy, c-format
 msgid "Mouse Port"
 msgstr "nombor port"
 
-#: install_steps_interactive.pm:206 standalone/mousedrake:47
+#: install_steps_interactive.pm:206
+#: standalone/mousedrake:47
 #, fuzzy, c-format
 msgid "Please choose which serial port your mouse is connected to."
 msgstr "bersiri."
@@ -5935,17 +6372,12 @@ msgstr ""
 
 #: install_steps_interactive.pm:323
 #, fuzzy, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr "Tidak Install dalam"
 
 #: install_steps_interactive.pm:328
 #, fuzzy, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
+msgid "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr "Tidak Install dalam"
 
 #: install_steps_interactive.pm:364
@@ -5960,9 +6392,7 @@ msgstr "Periksa blok _teruk?"
 
 #: install_steps_interactive.pm:394
 #, fuzzy, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
+msgid "Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)"
 msgstr "Gagal"
 
 #: install_steps_interactive.pm:397
@@ -5975,21 +6405,21 @@ msgstr ""
 msgid "Looking for available packages and rebuilding rpm database..."
 msgstr "dan."
 
-#: install_steps_interactive.pm:407 install_steps_interactive.pm:459
+#: install_steps_interactive.pm:407
+#: install_steps_interactive.pm:459
 #, fuzzy, c-format
 msgid "Looking for available packages..."
 msgstr "Tiada penyelarasan untuk %1"
 
-#: install_steps_interactive.pm:428 install_steps_interactive.pm:839
+#: install_steps_interactive.pm:428
+#: install_steps_interactive.pm:839
 #, c-format
 msgid "Choose a mirror from which to get the packages"
 msgstr ""
 
 #: install_steps_interactive.pm:468
 #, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "Your system does not have enough space left for installation or upgrade (%d > %d)"
 msgstr ""
 
 #: install_steps_interactive.pm:502
@@ -6004,8 +6434,10 @@ msgstr "on."
 msgid "Load"
 msgstr "Muatan"
 
-#: install_steps_interactive.pm:504 standalone/drakbackup:4055
-#: standalone/drakbackup:4125 standalone/logdrake:175
+#: install_steps_interactive.pm:504
+#: standalone/drakbackup:4055
+#: standalone/drakbackup:4125
+#: standalone/logdrake:175
 #, c-format
 msgid "Save"
 msgstr "Simpan"
@@ -6042,7 +6474,8 @@ msgstr "asas"
 msgid "Truly minimal install (especially no urpmi)"
 msgstr "tidak"
 
-#: install_steps_interactive.pm:645 standalone/drakxtv:52
+#: install_steps_interactive.pm:645
+#: standalone/drakxtv:52
 #, c-format
 msgid "All"
 msgstr "Semua"
@@ -6102,8 +6535,7 @@ msgstr "Internet?"
 
 #: install_steps_interactive.pm:834
 #, c-format
-msgid ""
-"Contacting Mandriva Linux web site to get the list of available mirrors..."
+msgid "Contacting Mandriva Linux web site to get the list of available mirrors..."
 msgstr ""
 
 #: install_steps_interactive.pm:853
@@ -6121,7 +6553,8 @@ msgstr "Gagal hubungi KDED!"
 msgid "Would you like to try again?"
 msgstr "Apa yang anda ingin lakukan?"
 
-#: install_steps_interactive.pm:884 standalone/drakclock:45
+#: install_steps_interactive.pm:884
+#: standalone/drakclock:45
 #, fuzzy, c-format
 msgid "Which is your timezone?"
 msgstr "Persekitaran Desktop adalah:"
@@ -6136,22 +6569,28 @@ msgstr ""
 msgid "NTP Server"
 msgstr "Tambah Pelayan NTP"
 
-#: install_steps_interactive.pm:952 install_steps_interactive.pm:960
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:985
-#: install_steps_interactive.pm:1136 services.pm:133
+#: install_steps_interactive.pm:952
+#: install_steps_interactive.pm:960
+#: install_steps_interactive.pm:978
+#: install_steps_interactive.pm:985
+#: install_steps_interactive.pm:1136
+#: services.pm:133
 #: standalone/drakbackup:1585
 #, c-format
 msgid "System"
 msgstr "Sistem"
 
-#: install_steps_interactive.pm:992 install_steps_interactive.pm:1019
-#: install_steps_interactive.pm:1036 install_steps_interactive.pm:1052
+#: install_steps_interactive.pm:992
+#: install_steps_interactive.pm:1019
+#: install_steps_interactive.pm:1036
+#: install_steps_interactive.pm:1052
 #: install_steps_interactive.pm:1063
 #, c-format
 msgid "Hardware"
 msgstr "Perkakasan"
 
-#: install_steps_interactive.pm:998 install_steps_interactive.pm:1007
+#: install_steps_interactive.pm:998
+#: install_steps_interactive.pm:1007
 #, fuzzy, c-format
 msgid "Remote CUPS server"
 msgstr "Penyelarasan Pelayan CUPS"
@@ -6168,9 +6607,7 @@ msgstr ""
 
 #: install_steps_interactive.pm:1042
 #, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
+msgid "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound card"
 msgstr ""
 
 #: install_steps_interactive.pm:1044
@@ -6183,7 +6620,8 @@ msgstr "Tidak"
 msgid "Graphical interface"
 msgstr "Konfigurasi (X) Antaramuka Grafikal"
 
-#: install_steps_interactive.pm:1070 install_steps_interactive.pm:1082
+#: install_steps_interactive.pm:1070
+#: install_steps_interactive.pm:1082
 #, c-format
 msgid "Network & Internet"
 msgstr "Rangkaian & Internet"
@@ -6193,8 +6631,10 @@ msgstr "Rangkaian & Internet"
 msgid "configured"
 msgstr "ditetapkan"
 
-#: install_steps_interactive.pm:1093 install_steps_interactive.pm:1107
-#: security/level.pm:55 steps.pm:20
+#: install_steps_interactive.pm:1093
+#: install_steps_interactive.pm:1107
+#: security/level.pm:55
+#: steps.pm:20
 #, c-format
 msgid "Security"
 msgstr "Keselamatan"
@@ -6215,12 +6655,14 @@ msgid "Boot"
 msgstr "Boot"
 
 #. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1127 printer/printerdrake.pm:961
+#: install_steps_interactive.pm:1127
+#: printer/printerdrake.pm:961
 #, c-format
 msgid "%s on %s"
 msgstr "%s pada %s"
 
-#: install_steps_interactive.pm:1141 services.pm:175
+#: install_steps_interactive.pm:1141
+#: services.pm:175
 #, fuzzy, c-format
 msgid "Services: %d activated for %d registered"
 msgstr "Perkhidmatan"
@@ -6237,11 +6679,7 @@ msgstr "Memasang PemuatBoot..."
 
 #: install_steps_interactive.pm:1244
 #, fuzzy, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
+msgid "You appear to have an OldWorld or Unknown machine, the yaboot bootloader will not work for you. The install will continue, but you'll need to use BootX or some other means to boot your machine. The kernel argument for the root fs is: root=%s"
 msgstr ""
 "Entah\n"
 "\n"
@@ -6260,12 +6698,11 @@ msgstr "Ralat?"
 
 #: install_steps_interactive.pm:1270
 #, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
+msgid "In this security level, access to the files in the Windows partition is restricted to the administrator."
 msgstr ""
 
-#: install_steps_interactive.pm:1299 standalone/drakautoinst:76
+#: install_steps_interactive.pm:1299
+#: standalone/drakautoinst:76
 #, fuzzy, c-format
 msgid "Insert a blank floppy in drive %s"
 msgstr "masukkan cakera liut kosong ke dalam pemacu cakera liut"
@@ -6288,14 +6725,19 @@ msgid ""
 "Do you really want to quit now?"
 msgstr ""
 
-#: install_steps_interactive.pm:1328 standalone/draksambashare:422
-#: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159
-#: standalone/logdrake:452 standalone/logdrake:458
+#: install_steps_interactive.pm:1328
+#: standalone/draksambashare:422
+#: standalone/draksambashare:529
+#: standalone/drakups:120
+#: standalone/drakups:159
+#: standalone/logdrake:452
+#: standalone/logdrake:458
 #, c-format
 msgid "Congratulations"
 msgstr "Tahniah"
 
-#: install_steps_interactive.pm:1336 install_steps_interactive.pm:1337
+#: install_steps_interactive.pm:1336
+#: install_steps_interactive.pm:1337
 #, fuzzy, c-format
 msgid "Generate auto install floppy"
 msgstr "Janakan cakera liut Auto Pasang"
@@ -6318,38 +6760,53 @@ msgstr "Alatan Mandriva Linux"
 #. -PO: This string must fit in a 80-char wide text screen
 #: install_steps_newt.pm:34
 #, fuzzy, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> Antara unsur   |  <Space> pilih   |  <F12> Skrin "
-"seterusnya "
+msgid "  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgstr "  <Tab>/<Alt-Tab> Antara unsur   |  <Space> pilih   |  <F12> Skrin seterusnya "
 
 #: interactive.pm:196
 #, c-format
 msgid "Choose a file"
 msgstr "Pilih fail"
 
-#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526
-#: standalone/drakfont:657 standalone/drakhosts:242 standalone/draknfs:605
-#: standalone/draksambashare:1129 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
+#: interactive.pm:321
+#: interactive/gtk.pm:508
+#: standalone/drakbackup:1526
+#: standalone/drakfont:657
+#: standalone/drakhosts:242
+#: standalone/draknfs:605
+#: standalone/draksambashare:1129
+#: standalone/drakups:301
+#: standalone/drakups:361
+#: standalone/drakups:381
+#: standalone/drakvpn:319
 #: standalone/drakvpn:680
 #, c-format
 msgid "Add"
 msgstr "Tambah"
 
-#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249
-#: standalone/draknfs:612 standalone/draksambashare:1086
-#: standalone/draksambashare:1139 standalone/draksambashare:1178
+#: interactive.pm:321
+#: interactive/gtk.pm:508
+#: standalone/drakhosts:249
+#: standalone/draknfs:612
+#: standalone/draksambashare:1086
+#: standalone/draksambashare:1139
+#: standalone/draksambashare:1178
 #, c-format
 msgid "Modify"
 msgstr "Ubah"
 
-#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256
-#: standalone/draknfs:619 standalone/draksambashare:1087
-#: standalone/draksambashare:1147 standalone/draksambashare:1186
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:319 standalone/drakvpn:680
+#: interactive.pm:321
+#: interactive/gtk.pm:508
+#: standalone/drakhosts:256
+#: standalone/draknfs:619
+#: standalone/draksambashare:1087
+#: standalone/draksambashare:1147
+#: standalone/draksambashare:1186
+#: standalone/drakups:303
+#: standalone/drakups:363
+#: standalone/drakups:383
+#: standalone/drakvpn:319
+#: standalone/drakvpn:680
 #, c-format
 msgid "Remove"
 msgstr "Buang"
@@ -6359,7 +6816,9 @@ msgstr "Buang"
 msgid "Basic"
 msgstr "Asas"
 
-#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490
+#: interactive.pm:436
+#: interactive/newt.pm:321
+#: ugtk2.pm:490
 #, c-format
 msgid "Finish"
 msgstr "Tamat"
@@ -6369,12 +6828,14 @@ msgstr "Tamat"
 msgid "Do"
 msgstr "Janga_n Simpan"
 
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
+#: interactive/stdio.pm:29
+#: interactive/stdio.pm:148
 #, fuzzy, c-format
 msgid "Bad choice, try again\n"
 msgstr "Salah pilih, cuba lagi\n"
 
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
+#: interactive/stdio.pm:30
+#: interactive/stdio.pm:149
 #, fuzzy, c-format
 msgid "Your choice? (default %s) "
 msgstr "Pilih aplikasi default anda"
@@ -6436,14 +6897,16 @@ msgstr "hakmilik %s telah bertukar ke %s\n"
 msgid "Re-submit"
 msgstr "Ulang_but"
 
-#: keyboard.pm:171 keyboard.pm:203
+#: keyboard.pm:171
+#: keyboard.pm:203
 #, fuzzy, c-format
 msgid ""
 "_: keyboard\n"
 "Czech (QWERTZ)"
 msgstr "keyboard|Czechoslovakia (qwertz)"
 
-#: keyboard.pm:172 keyboard.pm:205
+#: keyboard.pm:172
+#: keyboard.pm:205
 #, c-format
 msgid ""
 "_: keyboard\n"
@@ -6457,28 +6920,32 @@ msgid ""
 "Dvorak"
 msgstr "Dvorak"
 
-#: keyboard.pm:174 keyboard.pm:222
+#: keyboard.pm:174
+#: keyboard.pm:222
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Spanish"
 msgstr "Sepanyol"
 
-#: keyboard.pm:175 keyboard.pm:223
+#: keyboard.pm:175
+#: keyboard.pm:223
 #, fuzzy, c-format
 msgid ""
 "_: keyboard\n"
 "Finnish"
 msgstr "Pilihan Papan Kekunci"
 
-#: keyboard.pm:176 keyboard.pm:225
+#: keyboard.pm:176
+#: keyboard.pm:225
 #, fuzzy, c-format
 msgid ""
 "_: keyboard\n"
 "French"
 msgstr "Pilihan Papan Kekunci"
 
-#: keyboard.pm:177 keyboard.pm:269
+#: keyboard.pm:177
+#: keyboard.pm:269
 #, fuzzy, c-format
 msgid ""
 "_: keyboard\n"
@@ -6492,26 +6959,30 @@ msgid ""
 "Polish"
 msgstr "Pilihan Papan Kekunci"
 
-#: keyboard.pm:179 keyboard.pm:281
+#: keyboard.pm:179
+#: keyboard.pm:281
 #, fuzzy, c-format
 msgid ""
 "_: keyboard\n"
 "Russian"
 msgstr "Pilihan Papan Kekunci"
 
-#: keyboard.pm:181 keyboard.pm:287
+#: keyboard.pm:181
+#: keyboard.pm:287
 #, fuzzy, c-format
 msgid ""
 "_: keyboard\n"
 "Swedish"
 msgstr "Pilihan Papan Kekunci"
 
-#: keyboard.pm:182 keyboard.pm:317
+#: keyboard.pm:182
+#: keyboard.pm:317
 #, fuzzy, c-format
 msgid "UK keyboard"
 msgstr "Pilihan Papan Kekunci"
 
-#: keyboard.pm:183 keyboard.pm:320
+#: keyboard.pm:183
+#: keyboard.pm:320
 #, fuzzy, c-format
 msgid "US keyboard"
 msgstr "Pilihan Papan Kekunci"
@@ -7342,7 +7813,8 @@ msgstr "default:LTR"
 msgid "Andorra"
 msgstr "Andorra"
 
-#: lang.pm:196 network/adsl_consts.pm:943
+#: lang.pm:196
+#: network/adsl_consts.pm:943
 #, c-format
 msgid "United Arab Emirates"
 msgstr "Emiriah Arab Bersatu"
@@ -7387,7 +7859,9 @@ msgstr "Angola"
 msgid "Antarctica"
 msgstr "Antartika"
 
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
+#: lang.pm:205
+#: network/adsl_consts.pm:55
+#: standalone/drakxtv:50
 #, c-format
 msgid "Argentina"
 msgstr "Argentina"
@@ -7427,7 +7901,9 @@ msgstr "Bangladesh"
 msgid "Burkina Faso"
 msgstr "Burkina Faso"
 
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
+#: lang.pm:216
+#: network/adsl_consts.pm:170
+#: network/adsl_consts.pm:179
 #, c-format
 msgid "Bulgaria"
 msgstr "Bulgaria"
@@ -7532,16 +8008,27 @@ msgstr "Chile"
 msgid "Cameroon"
 msgstr "Cameroon"
 
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
+#: lang.pm:240
+#: network/adsl_consts.pm:188
+#: network/adsl_consts.pm:197
+#: network/adsl_consts.pm:206
+#: network/adsl_consts.pm:215
+#: network/adsl_consts.pm:224
+#: network/adsl_consts.pm:233
+#: network/adsl_consts.pm:242
+#: network/adsl_consts.pm:251
+#: network/adsl_consts.pm:260
+#: network/adsl_consts.pm:269
+#: network/adsl_consts.pm:278
+#: network/adsl_consts.pm:287
+#: network/adsl_consts.pm:296
+#: network/adsl_consts.pm:305
+#: network/adsl_consts.pm:314
+#: network/adsl_consts.pm:323
+#: network/adsl_consts.pm:332
+#: network/adsl_consts.pm:341
+#: network/adsl_consts.pm:350
+#: network/adsl_consts.pm:359
 #, c-format
 msgid "China"
 msgstr "China"
@@ -7591,7 +8078,8 @@ msgstr "Dominica"
 msgid "Dominican Republic"
 msgstr "Republik Dominica"
 
-#: lang.pm:254 network/adsl_consts.pm:44
+#: lang.pm:254
+#: network/adsl_consts.pm:44
 #, c-format
 msgid "Algeria"
 msgstr "Algeria"
@@ -7646,7 +8134,9 @@ msgstr "Kepulauan Faroe"
 msgid "Gabon"
 msgstr "Gabon"
 
-#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
+#: lang.pm:269
+#: network/adsl_consts.pm:954
+#: network/adsl_consts.pm:965
 #: network/netconnect.pm:46
 #, c-format
 msgid "United Kingdom"
@@ -7882,7 +8372,8 @@ msgstr "Liberia"
 msgid "Lesotho"
 msgstr "Lesotho"
 
-#: lang.pm:322 network/adsl_consts.pm:600
+#: lang.pm:322
+#: network/adsl_consts.pm:600
 #, c-format
 msgid "Lithuania"
 msgstr "Lithuania"
@@ -7902,7 +8393,8 @@ msgstr "Latvia"
 msgid "Libya"
 msgstr "Libya"
 
-#: lang.pm:326 network/adsl_consts.pm:609
+#: lang.pm:326
+#: network/adsl_consts.pm:609
 #, c-format
 msgid "Morocco"
 msgstr "Morocco"
@@ -8162,7 +8654,8 @@ msgstr "Singapura"
 msgid "Saint Helena"
 msgstr "Santa Helena"
 
-#: lang.pm:385 network/adsl_consts.pm:747
+#: lang.pm:385
+#: network/adsl_consts.pm:747
 #, c-format
 msgid "Slovenia"
 msgstr "Slovenia"
@@ -8182,7 +8675,8 @@ msgstr "Sierra Leone"
 msgid "San Marino"
 msgstr "San Marino"
 
-#: lang.pm:390 network/adsl_consts.pm:737
+#: lang.pm:390
+#: network/adsl_consts.pm:737
 #, c-format
 msgid "Senegal"
 msgstr "Senegal"
@@ -8257,7 +8751,8 @@ msgstr "Timor Larose"
 msgid "Turkmenistan"
 msgstr "Turkmenistan"
 
-#: lang.pm:406 network/adsl_consts.pm:931
+#: lang.pm:406
+#: network/adsl_consts.pm:931
 #, c-format
 msgid "Tunisia"
 msgstr "Tunisia"
@@ -8501,11 +8996,9 @@ msgstr ""
 #, fuzzy, c-format
 msgid ""
 "In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
+"properly, although it normally works fine without them. Would you like to specify\n"
 "extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
+"information it needs? Occasionally, probing will hang a computer, but it should\n"
 "not cause any damage."
 msgstr "Masuk."
 
@@ -8558,7 +9051,8 @@ msgstr "Rentetan dibandingkan adalah %s dan %s."
 msgid "Sun - Mouse"
 msgstr "Sokongan tetikus"
 
-#: mouse.pm:31 security/level.pm:12
+#: mouse.pm:31
+#: security/level.pm:12
 #, c-format
 msgid "Standard"
 msgstr "Piawai"
@@ -8578,21 +9072,32 @@ msgstr "Bola tetikus skrol dengan:"
 msgid "GlidePoint"
 msgstr "GlidePoint"
 
-#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
-#: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86
-#: network/modem.pm:115 network/netconnect.pm:597 network/netconnect.pm:602
-#: network/netconnect.pm:614 network/netconnect.pm:619
-#: network/netconnect.pm:635 network/netconnect.pm:637
+#: mouse.pm:36
+#: network/modem.pm:47
+#: network/modem.pm:48
+#: network/modem.pm:49
+#: network/modem.pm:68
+#: network/modem.pm:81
+#: network/modem.pm:86
+#: network/modem.pm:115
+#: network/netconnect.pm:597
+#: network/netconnect.pm:602
+#: network/netconnect.pm:614
+#: network/netconnect.pm:619
+#: network/netconnect.pm:635
+#: network/netconnect.pm:637
 #, c-format
 msgid "Automatic"
 msgstr "Automatik"
 
-#: mouse.pm:39 mouse.pm:73
+#: mouse.pm:39
+#: mouse.pm:73
 #, c-format
 msgid "Kensington Thinking Mouse"
 msgstr "Kensington Thinking Mouse"
 
-#: mouse.pm:40 mouse.pm:68
+#: mouse.pm:40
+#: mouse.pm:68
 #, c-format
 msgid "Genius NetMouse"
 msgstr "Genius NetMouse"
@@ -8602,22 +9107,26 @@ msgstr "Genius NetMouse"
 msgid "Genius NetScroll"
 msgstr "Genius NetScroll"
 
-#: mouse.pm:42 mouse.pm:52
+#: mouse.pm:42
+#: mouse.pm:52
 #, c-format
 msgid "Microsoft Explorer"
 msgstr "Microsoft Explorer"
 
-#: mouse.pm:47 mouse.pm:79
+#: mouse.pm:47
+#: mouse.pm:79
 #, fuzzy, c-format
 msgid "1 button"
 msgstr "Butang %d:"
 
-#: mouse.pm:48 mouse.pm:57
+#: mouse.pm:48
+#: mouse.pm:57
 #, fuzzy, c-format
 msgid "Generic 2 Button Mouse"
 msgstr "Tetikus 2 Butang (bersiri)"
 
-#: mouse.pm:50 mouse.pm:59
+#: mouse.pm:50
+#: mouse.pm:59
 #, fuzzy, c-format
 msgid "Generic 3 Button Mouse with Wheel emulation"
 msgstr "Generik"
@@ -8732,7 +9241,9 @@ msgstr ""
 msgid "Microsoft Xbox Controller S"
 msgstr "Pengawal PCMCIA/Cardbus"
 
-#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
+#: mouse.pm:93
+#: standalone/drakconnect:351
+#: standalone/drakvpn:1126
 #, c-format
 msgid "none"
 msgstr "tiada"
@@ -8742,7 +9253,10 @@ msgstr "tiada"
 msgid "No mouse"
 msgstr "(tiada tetikus dikonfigurasikan)"
 
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
+#: mouse.pm:304
+#: mouse.pm:367
+#: mouse.pm:376
+#: mouse.pm:435
 #, c-format
 msgid "Synaptics Touchpad"
 msgstr "Synaptics Touchpad"
@@ -8762,7 +9276,8 @@ msgstr "Klik untuk mengaktifkan profil yang dipilih"
 msgid "MOVE YOUR WHEEL!"
 msgstr "Sila buat gerakan anda..."
 
-#: network/drakfirewall.pm:12 share/compssUsers.pl:85
+#: network/drakfirewall.pm:12
+#: share/compssUsers.pl:85
 #, c-format
 msgid "Web Server"
 msgstr "Pelayan Web"
@@ -8874,11 +9389,19 @@ msgstr "Amaran - Tiada Firewall"
 msgid "Other ports"
 msgstr "Port lain"
 
-#: network/drakfirewall.pm:251 network/drakfirewall.pm:254
-#: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
-#: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
-#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202
-#: standalone/net_applet:385 standalone/net_applet:422
+#: network/drakfirewall.pm:251
+#: network/drakfirewall.pm:254
+#: standalone/drakids:33
+#: standalone/drakids:136
+#: standalone/drakids:145
+#: standalone/drakids:170
+#: standalone/drakids:179
+#: standalone/drakids:189
+#: standalone/drakids:265
+#: standalone/net_applet:59
+#: standalone/net_applet:202
+#: standalone/net_applet:385
+#: standalone/net_applet:422
 #, fuzzy, c-format
 msgid "Interactive Firewall"
 msgstr "_Konfigurasikan Firewall"
@@ -8886,8 +9409,7 @@ msgstr "_Konfigurasikan Firewall"
 #: network/drakfirewall.pm:252
 #, c-format
 msgid ""
-"You can be warned when someone accesses to a service or tries to intrude "
-"into your computer.\n"
+"You can be warned when someone accesses to a service or tries to intrude into your computer.\n"
 "Please select which network activity should be watched."
 msgstr ""
 
@@ -8936,35 +9458,45 @@ msgstr ""
 msgid "A \"%s\" attack has been attempted by %s"
 msgstr "Peristiwa ini telah diubah."
 
-#: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558
-#: network/netconnect.pm:561 network/netconnect.pm:704
+#: network/isdn.pm:117
+#: network/netconnect.pm:464
+#: network/netconnect.pm:558
+#: network/netconnect.pm:561
+#: network/netconnect.pm:704
 #: network/netconnect.pm:708
 #, fuzzy, c-format
 msgid "Unlisted - edit manually"
 msgstr "Edit Menu Ini..."
 
-#: network/isdn.pm:160 network/netconnect.pm:396
+#: network/isdn.pm:160
+#: network/netconnect.pm:396
 #, c-format
 msgid "ISA / PCMCIA"
 msgstr "ISA / PCMCIA"
 
-#: network/isdn.pm:160 network/netconnect.pm:396
+#: network/isdn.pm:160
+#: network/netconnect.pm:396
 #, fuzzy, c-format
 msgid "I do not know"
 msgstr "_Jangan Format"
 
-#: network/isdn.pm:161 network/netconnect.pm:396
+#: network/isdn.pm:161
+#: network/netconnect.pm:396
 #, c-format
 msgid "PCI"
 msgstr "PCI"
 
-#: network/isdn.pm:162 network/netconnect.pm:396
+#: network/isdn.pm:162
+#: network/netconnect.pm:396
 #, c-format
 msgid "USB"
 msgstr "USB"
 
-#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
-#: network/netconnect.pm:602 network/netconnect.pm:619
+#: network/modem.pm:47
+#: network/modem.pm:48
+#: network/modem.pm:49
+#: network/netconnect.pm:602
+#: network/netconnect.pm:619
 #: network/netconnect.pm:635
 #, c-format
 msgid "Manual"
@@ -9002,7 +9534,8 @@ msgstr ""
 msgid "Unable to find the ndiswrapper interface!"
 msgstr "Tidak dapat menjumpai imej pemasangan %s"
 
-#: network/netconnect.pm:69 network/netconnect.pm:494
+#: network/netconnect.pm:69
+#: network/netconnect.pm:494
 #: network/netconnect.pm:506
 #, fuzzy, c-format
 msgid "Manual choice"
@@ -9013,12 +9546,15 @@ msgstr "Pilihan Tidak Sah"
 msgid "Internal ISDN card"
 msgstr "Kad video tidak dikenali"
 
-#: network/netconnect.pm:80 printer/printerdrake.pm:1622 standalone/drakups:75
+#: network/netconnect.pm:80
+#: printer/printerdrake.pm:1622
+#: standalone/drakups:75
 #, fuzzy, c-format
 msgid "Manual configuration"
 msgstr "<b>Konfigurasi proksi _manual</b>"
 
-#: network/netconnect.pm:81 standalone/drakroam:121
+#: network/netconnect.pm:81
+#: standalone/drakroam:121
 #, fuzzy, c-format
 msgid "Automatic IP (BOOTP/DHCP)"
 msgstr "Guna konfigurasi IP dinamik (BOOTP/DHCP)"
@@ -9033,26 +9569,31 @@ msgstr "Guna konfigurasi IP dinamik (BOOTP/DHCP)"
 msgid "Protocol for the rest of the world"
 msgstr "Pilih protokol untuk pemasangan:"
 
-#: network/netconnect.pm:88 standalone/drakconnect:563
+#: network/netconnect.pm:88
+#: standalone/drakconnect:563
 #, fuzzy, c-format
 msgid "European protocol (EDSS1)"
 msgstr "<tr><td><i>Protokol</i></td>%1</tr>"
 
-#: network/netconnect.pm:89 standalone/drakconnect:564
+#: network/netconnect.pm:89
+#: standalone/drakconnect:564
 #, fuzzy, c-format
 msgid ""
 "Protocol for the rest of the world\n"
 "No D-Channel (leased lines)"
 msgstr "Protokol Saluran"
 
-#: network/netconnect.pm:103 standalone/harddrake2:329
-#: standalone/net_monitor:102 standalone/net_monitor:103
+#: network/netconnect.pm:103
+#: standalone/harddrake2:329
+#: standalone/net_monitor:102
+#: standalone/net_monitor:103
 #: standalone/net_monitor:108
 #, c-format
 msgid "unknown"
 msgstr "tidak diketahui"
 
-#: network/netconnect.pm:120 network/thirdparty.pm:219
+#: network/netconnect.pm:120
+#: network/thirdparty.pm:219
 #, c-format
 msgid "Alcatel speedtouch USB modem"
 msgstr ""
@@ -9132,32 +9673,38 @@ msgstr "PPPoA LLC"
 msgid "PPPoA VC"
 msgstr "PPPoA VC"
 
-#: network/netconnect.pm:145 standalone/drakconnect:498
+#: network/netconnect.pm:145
+#: standalone/drakconnect:498
 #, fuzzy, c-format
 msgid "Script-based"
 msgstr "Berasaskan FVWM"
 
-#: network/netconnect.pm:146 standalone/drakconnect:498
+#: network/netconnect.pm:146
+#: standalone/drakconnect:498
 #, c-format
 msgid "PAP"
 msgstr "PAP"
 
-#: network/netconnect.pm:147 standalone/drakconnect:498
+#: network/netconnect.pm:147
+#: standalone/drakconnect:498
 #, fuzzy, c-format
 msgid "Terminal-based"
 msgstr "Berasaskan FVWM"
 
-#: network/netconnect.pm:148 standalone/drakconnect:498
+#: network/netconnect.pm:148
+#: standalone/drakconnect:498
 #, c-format
 msgid "CHAP"
 msgstr "CHAP"
 
-#: network/netconnect.pm:149 standalone/drakconnect:498
+#: network/netconnect.pm:149
+#: standalone/drakconnect:498
 #, c-format
 msgid "PAP/CHAP"
 msgstr "PAP/CHAP"
 
-#: network/netconnect.pm:251 standalone/drakconnect:56
+#: network/netconnect.pm:251
+#: standalone/drakconnect:56
 #, fuzzy, c-format
 msgid "Network & Internet Configuration"
 msgstr "Jurucipta Konfigurasi Internet"
@@ -9167,8 +9714,11 @@ msgstr "Jurucipta Konfigurasi Internet"
 msgid "LAN connection"
 msgstr "Sambungan daripada %s:%u"
 
-#: network/netconnect.pm:258 network/netconnect.pm:277 standalone/drakroam:182
-#: standalone/drakroam:220 standalone/drakroam:223
+#: network/netconnect.pm:258
+#: network/netconnect.pm:277
+#: standalone/drakroam:182
+#: standalone/drakroam:220
+#: standalone/drakroam:223
 #, fuzzy, c-format
 msgid "Wireless connection"
 msgstr "Konfigurasikan Sambungan Tanpawayar"
@@ -9203,12 +9753,14 @@ msgstr "Sambungan daripada %s:%u"
 msgid "Choose the connection you want to configure"
 msgstr "Apa yang anda ingin konfigurasikan?"
 
-#: network/netconnect.pm:288 network/netconnect.pm:782
+#: network/netconnect.pm:288
+#: network/netconnect.pm:782
 #, fuzzy, c-format
 msgid "Connection Configuration"
 msgstr "Status konfigurasi bagi %s %s\n"
 
-#: network/netconnect.pm:288 network/netconnect.pm:783
+#: network/netconnect.pm:288
+#: network/netconnect.pm:783
 #, c-format
 msgid "Please fill or check the field below"
 msgstr ""
@@ -9218,12 +9770,14 @@ msgstr ""
 msgid "Your personal phone number"
 msgstr "Nombor panggilan untuk difakskan"
 
-#: network/netconnect.pm:292 network/netconnect.pm:786
-#, c-format
+#: network/netconnect.pm:292
+#: network/netconnect.pm:786
+#, fuzzy, c-format
 msgid "Provider name (ex provider.net)"
-msgstr ""
+msgstr "Masukkan nama penyedia untuk akaun ini."
 
-#: network/netconnect.pm:293 standalone/drakconnect:493
+#: network/netconnect.pm:293
+#: standalone/drakconnect:493
 #, fuzzy, c-format
 msgid "Provider phone number"
 msgstr "Nombor Telefon Pejabat:"
@@ -9238,52 +9792,61 @@ msgstr "Alamat _IP (tidak wajib):"
 msgid "Provider DNS 2 (optional)"
 msgstr "Alamat _IP (tidak wajib):"
 
-#: network/netconnect.pm:296 standalone/drakconnect:444
+#: network/netconnect.pm:296
+#: standalone/drakconnect:444
 #, fuzzy, c-format
 msgid "Dialing mode"
 msgstr "Mod bantuan"
 
-#: network/netconnect.pm:297 standalone/drakconnect:449
+#: network/netconnect.pm:297
+#: standalone/drakconnect:449
 #: standalone/drakconnect:517
 #, fuzzy, c-format
 msgid "Connection speed"
 msgstr "Kelajuan Failover"
 
-#: network/netconnect.pm:298 standalone/drakconnect:454
+#: network/netconnect.pm:298
+#: standalone/drakconnect:454
 #, fuzzy, c-format
 msgid "Connection timeout (in sec)"
 msgstr "tetap masatamat dalam saat"
 
-#: network/netconnect.pm:299 network/netconnect.pm:324
-#: network/netconnect.pm:789 standalone/drakconnect:491
+#: network/netconnect.pm:299
+#: network/netconnect.pm:324
+#: network/netconnect.pm:789
+#: standalone/drakconnect:491
 #, fuzzy, c-format
 msgid "Account Login (user name)"
-msgstr ""
-"Cetak nama bagi pengguna semasa.\n"
-"\n"
+msgstr "Masukkan nama logmasuk untuk akaun ini."
 
-#: network/netconnect.pm:300 network/netconnect.pm:325
-#: network/netconnect.pm:790 standalone/drakconnect:492
+#: network/netconnect.pm:300
+#: network/netconnect.pm:325
+#: network/netconnect.pm:790
+#: standalone/drakconnect:492
 #, fuzzy, c-format
 msgid "Account Password"
 msgstr "katalaluan salah"
 
-#: network/netconnect.pm:301 standalone/drakconnect:554
+#: network/netconnect.pm:301
+#: standalone/drakconnect:554
 #, fuzzy, c-format
 msgid "Card IRQ"
 msgstr "Kad Video"
 
-#: network/netconnect.pm:302 standalone/drakconnect:555
+#: network/netconnect.pm:302
+#: standalone/drakconnect:555
 #, fuzzy, c-format
 msgid "Card mem (DMA)"
 msgstr "Kad video tidak dikenali"
 
-#: network/netconnect.pm:303 standalone/drakconnect:556
+#: network/netconnect.pm:303
+#: standalone/drakconnect:556
 #, fuzzy, c-format
 msgid "Card IO"
 msgstr "Kad Video"
 
-#: network/netconnect.pm:304 standalone/drakconnect:557
+#: network/netconnect.pm:304
+#: standalone/drakconnect:557
 #, fuzzy, c-format
 msgid "Card IO_0"
 msgstr "Kad Video"
@@ -9303,31 +9866,40 @@ msgstr "Pilihan Pengguna Diketahui"
 msgid "Use BPALogin (needed for Telstra)"
 msgstr ""
 
-#: network/netconnect.pm:349 network/netconnect.pm:671
-#: network/netconnect.pm:822 network/netconnect.pm:1167
+#: network/netconnect.pm:349
+#: network/netconnect.pm:671
+#: network/netconnect.pm:822
+#: network/netconnect.pm:1167
 #, fuzzy, c-format
 msgid "Select the network interface to configure:"
 msgstr "Pilih kad yang anda ingin konfigurasikan:"
 
-#: network/netconnect.pm:351 network/netconnect.pm:386
-#: network/netconnect.pm:672 network/netconnect.pm:824 network/shorewall.pm:70
+#: network/netconnect.pm:351
+#: network/netconnect.pm:386
+#: network/netconnect.pm:672
+#: network/netconnect.pm:824
+#: network/shorewall.pm:70
 #: standalone/drakconnect:713
 #, fuzzy, c-format
 msgid "Net Device"
 msgstr "penggunaan: $0 <net-device>"
 
-#: network/netconnect.pm:352 network/netconnect.pm:357
+#: network/netconnect.pm:352
+#: network/netconnect.pm:357
 #, fuzzy, c-format
 msgid "External ISDN modem"
 msgstr "Sagem USB modem"
 
-#: network/netconnect.pm:385 standalone/harddrake2:216
+#: network/netconnect.pm:385
+#: standalone/harddrake2:216
 #, fuzzy, c-format
 msgid "Select a device!"
 msgstr "Pilih Peranti"
 
-#: network/netconnect.pm:394 network/netconnect.pm:404
-#: network/netconnect.pm:414 network/netconnect.pm:447
+#: network/netconnect.pm:394
+#: network/netconnect.pm:404
+#: network/netconnect.pm:414
+#: network/netconnect.pm:447
 #: network/netconnect.pm:461
 #, fuzzy, c-format
 msgid "ISDN Configuration"
@@ -9344,8 +9916,7 @@ msgid ""
 "\n"
 "If you have an ISA card, the values on the next screen should be right.\n"
 "\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n"
 msgstr "on dan"
 
 #: network/netconnect.pm:409
@@ -9365,13 +9936,12 @@ msgstr ""
 
 #: network/netconnect.pm:433
 #, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
+msgid "A CAPI driver is available for this modem. This CAPI driver can offer more capabilities than the free driver (like sending faxes). Which driver do you want to use?"
 msgstr ""
 
-#: network/netconnect.pm:435 standalone/drakconnect:109 standalone/drakups:251
+#: network/netconnect.pm:435
+#: standalone/drakconnect:109
+#: standalone/drakups:251
 #: standalone/harddrake2:133
 #, c-format
 msgid "Driver"
@@ -9382,9 +9952,12 @@ msgstr "Pemacu"
 msgid "Which protocol do you want to use?"
 msgstr "Tetapan Xorg mana yang anda hendak?"
 
-#: network/netconnect.pm:449 standalone/drakconnect:109
-#: standalone/drakconnect:300 standalone/drakconnect:562
-#: standalone/drakids:207 standalone/drakvpn:1128
+#: network/netconnect.pm:449
+#: standalone/drakconnect:109
+#: standalone/drakconnect:300
+#: standalone/drakconnect:562
+#: standalone/drakids:207
+#: standalone/drakvpn:1128
 #, c-format
 msgid "Protocol"
 msgstr "Protokol"
@@ -9396,7 +9969,8 @@ msgid ""
 "If it is not listed, choose Unlisted."
 msgstr ""
 
-#: network/netconnect.pm:463 network/netconnect.pm:557
+#: network/netconnect.pm:463
+#: network/netconnect.pm:557
 #: network/netconnect.pm:703
 #, fuzzy, c-format
 msgid "Provider:"
@@ -9444,7 +10018,8 @@ msgstr "Nombor telefon:"
 msgid "Login ID"
 msgstr "ID SCSI"
 
-#: network/netconnect.pm:599 network/netconnect.pm:632
+#: network/netconnect.pm:599
+#: network/netconnect.pm:632
 #, fuzzy, c-format
 msgid "Dialup: IP parameters"
 msgstr "_Parameter kernel umum"
@@ -9454,10 +10029,15 @@ msgstr "_Parameter kernel umum"
 msgid "IP parameters"
 msgstr "Parameter kernel"
 
-#: network/netconnect.pm:603 network/netconnect.pm:938
-#: printer/printerdrake.pm:460 standalone/drakconnect:109
-#: standalone/drakconnect:316 standalone/drakconnect:882
-#: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
+#: network/netconnect.pm:603
+#: network/netconnect.pm:938
+#: printer/printerdrake.pm:460
+#: standalone/drakconnect:109
+#: standalone/drakconnect:316
+#: standalone/drakconnect:882
+#: standalone/drakhosts:197
+#: standalone/drakroam:122
+#: standalone/drakups:286
 #, c-format
 msgid "IP address"
 msgstr "Alamat IP"
@@ -9482,29 +10062,33 @@ msgstr "DNS"
 msgid "Domain name"
 msgstr "Nama _Domain:"
 
-#: network/netconnect.pm:621 network/netconnect.pm:787
+#: network/netconnect.pm:621
+#: network/netconnect.pm:787
 #: standalone/drakconnect:992
 #, fuzzy, c-format
 msgid "First DNS Server (optional)"
-msgstr "Alamat IP pelayan DNS induk:"
+msgstr "Masukkan Nama Pelayan DNS"
 
-#: network/netconnect.pm:622 network/netconnect.pm:788
+#: network/netconnect.pm:622
+#: network/netconnect.pm:788
 #: standalone/drakconnect:993
 #, fuzzy, c-format
 msgid "Second DNS Server (optional)"
-msgstr "Alamat IP pelayan DNS induk:"
+msgstr "Masukkan Nama Pelayan DNS"
 
 #: network/netconnect.pm:623
 #, fuzzy, c-format
 msgid "Set hostname from IP"
 msgstr "Tak dapat tetapkan namahos ke `%s'"
 
-#: network/netconnect.pm:635 standalone/drakconnect:327
+#: network/netconnect.pm:635
+#: standalone/drakconnect:327
 #, c-format
 msgid "Gateway"
 msgstr "Gateway"
 
-#: network/netconnect.pm:636 standalone/drakroam:124
+#: network/netconnect.pm:636
+#: standalone/drakroam:124
 #, fuzzy, c-format
 msgid "Gateway IP address"
 msgstr "Alamat IP gateway:"
@@ -9561,16 +10145,15 @@ msgstr "Pilih Jurupacu untuk digunakan untuk Girilan ini."
 msgid "Zeroconf hostname resolution"
 msgstr "hidupkan wins untuk resolusi namahos"
 
-#: network/netconnect.pm:894 network/netconnect.pm:925
+#: network/netconnect.pm:894
+#: network/netconnect.pm:925
 #, fuzzy, c-format
 msgid "Configuring network device %s (driver %s)"
 msgstr "Tidak dapat mengkonfigurasikan peranti rangkaian %s"
 
 #: network/netconnect.pm:895
 #, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
+msgid "The following protocols can be used to configure a LAN connection. Please choose the one you want to use"
 msgstr ""
 
 #: network/netconnect.pm:926
@@ -9579,42 +10162,48 @@ msgid ""
 "Please enter the IP configuration for this machine.\n"
 "Each item should be entered as an IP address in dotted-decimal\n"
 "notation (for example, 1.2.3.4)."
-msgstr ""
-"Sila masukkan konfigurasi IP bagi mesin ini. Setiap item patut dimasukkan "
-"sebagai alamat IP pada notasi desimal-berdot (sebagai contoh, 1.2.3.4)."
+msgstr "Sila masukkan konfigurasi IP bagi mesin ini. Setiap item patut dimasukkan sebagai alamat IP pada notasi desimal-berdot (sebagai contoh, 1.2.3.4)."
 
-#: network/netconnect.pm:933 standalone/drakconnect:373
+#: network/netconnect.pm:933
+#: standalone/drakconnect:373
 #, fuzzy, c-format
 msgid "Assign host name from DHCP address"
 msgstr "DHCP"
 
-#: network/netconnect.pm:934 standalone/drakconnect:375
+#: network/netconnect.pm:934
+#: standalone/drakconnect:375
 #, fuzzy, c-format
 msgid "DHCP host name"
 msgstr "Nama _Hos Pelayan:"
 
-#: network/netconnect.pm:939 standalone/drakconnect:321
-#: standalone/drakconnect:883 standalone/drakgw:181
+#: network/netconnect.pm:939
+#: standalone/drakconnect:321
+#: standalone/drakconnect:883
+#: standalone/drakgw:181
 #, c-format
 msgid "Netmask"
 msgstr "Netmask"
 
-#: network/netconnect.pm:941 standalone/drakconnect:437
+#: network/netconnect.pm:941
+#: standalone/drakconnect:437
 #, c-format
 msgid "Track network card id (useful for laptops)"
 msgstr ""
 
-#: network/netconnect.pm:942 standalone/drakconnect:438
+#: network/netconnect.pm:942
+#: standalone/drakconnect:438
 #, fuzzy, c-format
 msgid "Network Hotplugging"
 msgstr "Rangkaian tidak dapat dicapai."
 
-#: network/netconnect.pm:944 standalone/drakconnect:432
+#: network/netconnect.pm:944
+#: standalone/drakconnect:432
 #, fuzzy, c-format
 msgid "Start at boot"
 msgstr "Mula ketika But"
 
-#: network/netconnect.pm:946 standalone/drakconnect:460
+#: network/netconnect.pm:946
+#: standalone/drakconnect:460
 #, c-format
 msgid "Metric"
 msgstr "Metrik"
@@ -9624,39 +10213,46 @@ msgstr "Metrik"
 msgid "Enable IPv6 to IPv4 tunnel"
 msgstr ""
 
-#: network/netconnect.pm:949 standalone/drakconnect:369
+#: network/netconnect.pm:949
+#: standalone/drakconnect:369
 #: standalone/drakconnect:886
 #, fuzzy, c-format
 msgid "DHCP client"
 msgstr "(%ld)PELANGGAN >>> %s"
 
-#: network/netconnect.pm:951 standalone/drakconnect:379
+#: network/netconnect.pm:951
+#: standalone/drakconnect:379
 #, fuzzy, c-format
 msgid "DHCP timeout (in seconds)"
 msgstr "tetap masatamat dalam saat"
 
-#: network/netconnect.pm:952 standalone/drakconnect:382
+#: network/netconnect.pm:952
+#: standalone/drakconnect:382
 #, fuzzy, c-format
 msgid "Get DNS servers from DHCP"
 msgstr "Alamat IP DCC:"
 
-#: network/netconnect.pm:953 standalone/drakconnect:383
+#: network/netconnect.pm:953
+#: standalone/drakconnect:383
 #, c-format
 msgid "Get YP servers from DHCP"
 msgstr ""
 
-#: network/netconnect.pm:954 standalone/drakconnect:384
+#: network/netconnect.pm:954
+#: standalone/drakconnect:384
 #, c-format
 msgid "Get NTPD servers from DHCP"
 msgstr ""
 
-#: network/netconnect.pm:962 printer/printerdrake.pm:1876
+#: network/netconnect.pm:962
+#: printer/printerdrake.pm:1876
 #: standalone/drakconnect:676
 #, fuzzy, c-format
 msgid "IP address should be in format 1.2.3.4"
 msgstr "IP dalam"
 
-#: network/netconnect.pm:966 standalone/drakconnect:680
+#: network/netconnect.pm:966
+#: standalone/drakconnect:680
 #, fuzzy, c-format
 msgid "Netmask should be in format 255.255.224.0"
 msgstr "Gateway dalam"
@@ -9666,8 +10262,10 @@ msgstr "Gateway dalam"
 msgid "Warning: IP address %s is usually reserved!"
 msgstr "Amaran IP!"
 
-#: network/netconnect.pm:975 standalone/drakTermServ:1856
-#: standalone/drakTermServ:1857 standalone/drakTermServ:1858
+#: network/netconnect.pm:975
+#: standalone/drakTermServ:1856
+#: standalone/drakTermServ:1857
+#: standalone/drakTermServ:1858
 #, fuzzy, c-format
 msgid "%s already in use\n"
 msgstr "gid %s telah digunakan."
@@ -9697,7 +10295,8 @@ msgstr "Pilih Peranti"
 msgid "Please enter the wireless parameters for this card:"
 msgstr ""
 
-#: network/netconnect.pm:1061 standalone/drakconnect:404
+#: network/netconnect.pm:1061
+#: standalone/drakconnect:404
 #: standalone/drakroam:52
 #, fuzzy, c-format
 msgid "Operating Mode"
@@ -9733,13 +10332,15 @@ msgstr "Sekunder"
 msgid "Auto"
 msgstr "Auto"
 
-#: network/netconnect.pm:1065 standalone/drakconnect:405
+#: network/netconnect.pm:1065
+#: standalone/drakconnect:405
 #: standalone/drakroam:115
 #, fuzzy, c-format
 msgid "Network name (ESSID)"
 msgstr "ESSID (ID rangkaian):"
 
-#: network/netconnect.pm:1066 standalone/drakroam:116
+#: network/netconnect.pm:1066
+#: standalone/drakroam:116
 #, fuzzy, c-format
 msgid "Encryption mode"
 msgstr "Mod bantuan"
@@ -9749,27 +10350,32 @@ msgstr "Mod bantuan"
 msgid "Allow access point roaming"
 msgstr "Benarkan capaian dari semua hos"
 
-#: network/netconnect.pm:1073 standalone/drakconnect:406
+#: network/netconnect.pm:1073
+#: standalone/drakconnect:406
 #, fuzzy, c-format
 msgid "Network ID"
 msgstr "ESSID (ID rangkaian):"
 
-#: network/netconnect.pm:1074 standalone/drakconnect:407
+#: network/netconnect.pm:1074
+#: standalone/drakconnect:407
 #, fuzzy, c-format
 msgid "Operating frequency"
 msgstr "Sistem Pengoperasian"
 
-#: network/netconnect.pm:1075 standalone/drakconnect:408
+#: network/netconnect.pm:1075
+#: standalone/drakconnect:408
 #, fuzzy, c-format
 msgid "Sensitivity threshold"
 msgstr "Permu&laan muatan CPU:"
 
-#: network/netconnect.pm:1076 standalone/drakconnect:409
+#: network/netconnect.pm:1076
+#: standalone/drakconnect:409
 #, fuzzy, c-format
 msgid "Bitrate (in b/s)"
 msgstr "`(' hilang dalam `%s'"
 
-#: network/netconnect.pm:1077 standalone/drakconnect:420
+#: network/netconnect.pm:1077
+#: standalone/drakconnect:420
 #, c-format
 msgid "RTS/CTS"
 msgstr "RTS/CTS"
@@ -9777,23 +10383,22 @@ msgstr "RTS/CTS"
 #: network/netconnect.pm:1078
 #, c-format
 msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
+"RTS/CTS adds a handshake before each packet transmission to make sure that the\n"
+"channel is clear. This adds overhead, but increase performance in case of hidden\n"
 "nodes or large number of active nodes. This parameter sets the size of the\n"
 "smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
+"packet size disable the scheme. You may also set this parameter to auto, fixed\n"
 "or off."
 msgstr ""
 
-#: network/netconnect.pm:1085 standalone/drakconnect:421
+#: network/netconnect.pm:1085
+#: standalone/drakconnect:421
 #, fuzzy, c-format
 msgid "Fragmentation"
 msgstr "Dokumentasi"
 
-#: network/netconnect.pm:1086 standalone/drakconnect:422
+#: network/netconnect.pm:1086
+#: standalone/drakconnect:422
 #, fuzzy, c-format
 msgid "iwconfig command extra arguments"
 msgstr "Hujah teruk ke arahan pengguna\n"
@@ -9802,14 +10407,14 @@ msgstr "Hujah teruk ke arahan pengguna\n"
 #, c-format
 msgid ""
 "Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
+"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).\n"
 "\n"
 "See iwconfig(8) man page for further information."
 msgstr ""
 
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1094 standalone/drakconnect:423
+#: network/netconnect.pm:1094
+#: standalone/drakconnect:423
 #, fuzzy, c-format
 msgid "iwspy command extra arguments"
 msgstr "Hujah teruk ke arahan pengguna\n"
@@ -9826,7 +10431,8 @@ msgid ""
 "See iwpspy(8) man page for further information."
 msgstr ""
 
-#: network/netconnect.pm:1104 standalone/drakconnect:424
+#: network/netconnect.pm:1104
+#: standalone/drakconnect:424
 #, fuzzy, c-format
 msgid "iwpriv command extra arguments"
 msgstr "Hujah teruk ke arahan pengguna\n"
@@ -9834,16 +10440,13 @@ msgstr "Hujah teruk ke arahan pengguna\n"
 #: network/netconnect.pm:1105
 #, c-format
 msgid ""
-"iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
+"iwpriv enable to set up optionals (private) parameters of a wireless network\n"
 "interface.\n"
 "\n"
-"iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
+"iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
+"In theory, the documentation of each device driver should indicate how to use\n"
 "those interface specific commands and their effect.\n"
 "\n"
 "See iwpriv(8) man page for further information."
@@ -9851,16 +10454,12 @@ msgstr ""
 
 #: network/netconnect.pm:1120
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)."
 msgstr ""
 
 #: network/netconnect.pm:1124
 #, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)."
 msgstr ""
 
 #: network/netconnect.pm:1167
@@ -9907,12 +10506,14 @@ msgstr "IP."
 msgid "Last but not least you can also type in your DNS server IP addresses."
 msgstr ""
 
-#: network/netconnect.pm:1225 standalone/drakconnect:991
+#: network/netconnect.pm:1225
+#: standalone/drakconnect:991
 #, fuzzy, c-format
 msgid "Host name (optional)"
 msgstr "Nama _Hos Pelayan:"
 
-#: network/netconnect.pm:1225 standalone/drakhosts:197
+#: network/netconnect.pm:1225
+#: standalone/drakhosts:197
 #, c-format
 msgid "Host name"
 msgstr "Nama hos"
@@ -9957,7 +10558,8 @@ msgstr "Peranti gateway"
 msgid "DNS server address should be in format 1.2.3.4"
 msgstr "dalam"
 
-#: network/netconnect.pm:1248 standalone/drakconnect:685
+#: network/netconnect.pm:1248
+#: standalone/drakconnect:685
 #, fuzzy, c-format
 msgid "Gateway address should be in format 1.2.3.4"
 msgstr "Gateway dalam"
@@ -10016,7 +10618,8 @@ msgstr "mula?"
 msgid "Do you want to try to connect to the Internet now?"
 msgstr "Internet?"
 
-#: network/netconnect.pm:1341 standalone/drakconnect:1023
+#: network/netconnect.pm:1341
+#: standalone/drakconnect:1023
 #, fuzzy, c-format
 msgid "Testing your connection..."
 msgstr "Konfigurasi sambungan  ke Internet"
@@ -10047,17 +10650,14 @@ msgstr "Tahniah dan Internet"
 
 #: network/netconnect.pm:1386
 #, fuzzy, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+msgid "After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."
 msgstr "siap ulanghidup."
 
 #: network/netconnect.pm:1387
 #, c-format
 msgid ""
 "Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
+"Test your connection via net_monitor or mcc. If your connection does not work, you might want to relaunch the configuration."
 msgstr ""
 
 #: network/netconnect.pm:1398
@@ -10084,10 +10684,8 @@ msgstr "Konfigurasi Rangkaian"
 #: network/netconnect.pm:1402
 #, fuzzy, c-format
 msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"Because you are doing a network installation, your network is already configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.\n"
 msgstr "on Ok Internet Rangkaian"
 
 #: network/netconnect.pm:1405
@@ -10144,9 +10742,7 @@ msgstr "Status konfigurasi bagi %s %s\n"
 
 #: network/network.pm:409
 #, c-format
-msgid ""
-"Here you can set up your proxies configuration (eg: http://"
-"my_caching_server:8080"
+msgid "Here you can set up your proxies configuration (eg: http://my_caching_server:8080"
 msgstr ""
 
 #: network/network.pm:410
@@ -10190,8 +10786,7 @@ msgstr ""
 #: network/thirdparty.pm:240
 #, c-format
 msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
+"The ECI Hi-Focus modem cannot be supported due to binary driver distribution problem.\n"
 "\n"
 "You can find a driver on http://eciadsl.flashtux.org/"
 msgstr ""
@@ -10208,9 +10803,7 @@ msgstr ""
 
 #: network/thirdparty.pm:328
 #, c-format
-msgid ""
-"These packages can be found in Mandriva Club or in Mandriva commercial "
-"releases."
+msgid "These packages can be found in Mandriva Club or in Mandriva commercial releases."
 msgstr ""
 
 #: network/thirdparty.pm:330
@@ -10237,9 +10830,7 @@ msgstr "Masukkan cakera liut"
 
 #: network/thirdparty.pm:383
 #, fuzzy, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
+msgid "Insert a FAT formatted floppy in drive %s with %s in root directory and press %s"
 msgstr "dalam"
 
 #: network/thirdparty.pm:393
@@ -10255,7 +10846,8 @@ msgid ""
 "or skip and do it later."
 msgstr ""
 
-#: network/thirdparty.pm:407 network/thirdparty.pm:409
+#: network/thirdparty.pm:407
+#: network/thirdparty.pm:409
 #, fuzzy, c-format
 msgid "Use a floppy"
 msgstr "Cekara Liut"
@@ -10270,8 +10862,10 @@ msgstr "Guna partisyen sedia ada (onpart)"
 msgid "Firmware copy failed, file %s not found"
 msgstr ""
 
-#: network/thirdparty.pm:422 standalone/drakautoinst:250
-#: standalone/drakvpn:888 standalone/scannerdrake:405
+#: network/thirdparty.pm:422
+#: standalone/drakautoinst:250
+#: standalone/drakvpn:888
+#: standalone/scannerdrake:405
 #, c-format
 msgid "Congratulations!"
 msgstr "Tahniah !"
@@ -10320,8 +10914,7 @@ msgstr "LVM TIDAK disokong pada platform ini."
 #, fuzzy, c-format
 msgid ""
 "You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The only solution is to move your primary partitions to have the hole next to the extended partitions."
 msgstr "dalam."
 
 #: partition_table.pm:605
@@ -10344,8 +10937,7 @@ msgstr "Ralat menulis kepada fail %s"
 msgid ""
 "Something bad is happening on your drive. \n"
 "A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"It means writing anything on the disk will end up with random, corrupted data."
 msgstr "on on."
 
 #: pkgs.pm:21
@@ -10388,7 +10980,8 @@ msgstr "on"
 msgid "(on this machine)"
 msgstr "(dijumpai pada sistem ini)"
 
-#: printer/cups.pm:117 standalone/printerdrake:200
+#: printer/cups.pm:117
+#: standalone/printerdrake:200
 #, fuzzy, c-format
 msgid "Configured on other machines"
 msgstr "Tidak"
@@ -10398,9 +10991,12 @@ msgstr "Tidak"
 msgid "On CUPS server \"%s\""
 msgstr "Penyelarasan Pelayan CUPS"
 
-#: printer/cups.pm:119 printer/printerdrake.pm:4887
-#: printer/printerdrake.pm:4897 printer/printerdrake.pm:5056
-#: printer/printerdrake.pm:5067 printer/printerdrake.pm:5281
+#: printer/cups.pm:119
+#: printer/printerdrake.pm:4887
+#: printer/printerdrake.pm:4897
+#: printer/printerdrake.pm:5056
+#: printer/printerdrake.pm:5067
+#: printer/printerdrake.pm:5281
 #, c-format
 msgid " (Default)"
 msgstr " (Default)"
@@ -10450,10 +11046,16 @@ msgstr "Cetakan"
 msgid "Remote CUPS"
 msgstr "/_Konfigurasikan CUPS"
 
-#: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
-#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:690
-#: printer/main.pm:1808 printer/printerdrake.pm:960
-#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447
+#: printer/detect.pm:168
+#: printer/detect.pm:263
+#: printer/detect.pm:498
+#: printer/detect.pm:571
+#: printer/main.pm:330
+#: printer/main.pm:690
+#: printer/main.pm:1808
+#: printer/printerdrake.pm:960
+#: printer/printerdrake.pm:1120
+#: printer/printerdrake.pm:2447
 #: printer/printerdrake.pm:3981
 #, fuzzy, c-format
 msgid "Unknown model"
@@ -10474,7 +11076,8 @@ msgstr "Pencetak Tidak Diketahui"
 msgid "Printer on remote CUPS server"
 msgstr "on"
 
-#: printer/main.pm:27 printer/printerdrake.pm:1360
+#: printer/main.pm:27
+#: printer/printerdrake.pm:1360
 #: printer/printerdrake.pm:1899
 #, fuzzy, c-format
 msgid "Printer on remote lpd server"
@@ -10495,7 +11098,8 @@ msgstr "on SMB Tetingkap"
 msgid "Printer on NetWare server"
 msgstr "Tiada senarai pelayan pada permulaan"
 
-#: printer/main.pm:31 printer/printerdrake.pm:1903
+#: printer/main.pm:31
+#: printer/printerdrake.pm:1903
 #, fuzzy, c-format
 msgid "Enter a printer device URI"
 msgstr "Enter"
@@ -10510,17 +11114,20 @@ msgstr ""
 msgid "recommended"
 msgstr "dicadangkan"
 
-#: printer/main.pm:355 standalone/printerdrake:199
+#: printer/main.pm:355
+#: standalone/printerdrake:199
 #, fuzzy, c-format
 msgid "Configured on this machine"
 msgstr "(dijumpai pada sistem ini)"
 
-#: printer/main.pm:361 printer/printerdrake.pm:1445
+#: printer/main.pm:361
+#: printer/printerdrake.pm:1445
 #, fuzzy, c-format
 msgid " on parallel port #%s"
 msgstr "Semua permintaan pada port:"
 
-#: printer/main.pm:364 printer/printerdrake.pm:1448
+#: printer/main.pm:364
+#: printer/printerdrake.pm:1448
 #, fuzzy, c-format
 msgid ", USB printer #%s"
 msgstr "Pencetak Tidak Diketahui"
@@ -10610,8 +11217,10 @@ msgstr "Laksanakan Arahan"
 msgid "Parallel port #%s"
 msgstr "nombor port"
 
-#: printer/main.pm:432 printer/printerdrake.pm:1466
-#: printer/printerdrake.pm:1493 printer/printerdrake.pm:1508
+#: printer/main.pm:432
+#: printer/printerdrake.pm:1466
+#: printer/printerdrake.pm:1493
+#: printer/printerdrake.pm:1508
 #, fuzzy, c-format
 msgid "USB printer #%s"
 msgstr "Pencetak Tidak Diketahui"
@@ -10701,19 +11310,22 @@ msgstr "Laksanakan Arahan"
 msgid "URI: %s"
 msgstr "URI: %s"
 
-#: printer/main.pm:687 printer/printerdrake.pm:1047
+#: printer/main.pm:687
+#: printer/printerdrake.pm:1047
 #: printer/printerdrake.pm:3119
 #, fuzzy, c-format
 msgid "Raw printer (No driver)"
 msgstr "Tiada pemacu ditemui (pencetak baru)"
 
-#: printer/main.pm:1307 printer/printerdrake.pm:211
+#: printer/main.pm:1307
+#: printer/printerdrake.pm:211
 #: printer/printerdrake.pm:223
 #, fuzzy, c-format
 msgid "Local network(s)"
 msgstr "Rangkaian tempatan"
 
-#: printer/main.pm:1309 printer/printerdrake.pm:227
+#: printer/main.pm:1309
+#: printer/printerdrake.pm:227
 #, fuzzy, c-format
 msgid "Interface \"%s\""
 msgstr "Antaramuka"
@@ -10735,14 +11347,7 @@ msgstr "Port"
 
 #: printer/printerdrake.pm:24
 #, fuzzy, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by decompressing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.\n"
 msgstr "on Tetingkap on dan fail fail dan fail Salin fail direktori dan dan on"
 
 #: printer/printerdrake.pm:67
@@ -10752,16 +11357,12 @@ msgstr "Alatan konfigurasi CUPS"
 
 #: printer/printerdrake.pm:68
 #, fuzzy, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
+msgid "Here you can choose whether the printers connected to this machine should be accessible by remote machines and by which remote machines."
 msgstr "dan."
 
 #: printer/printerdrake.pm:69
 #, fuzzy, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+msgid "You can also decide here whether printers on remote machines should be automatically made available on this machine."
 msgstr "on on."
 
 #: printer/printerdrake.pm:72
@@ -10784,7 +11385,8 @@ msgstr "on hos "
 msgid "Custom configuration"
 msgstr "Status konfigurasi bagi %s %s\n"
 
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
+#: printer/printerdrake.pm:89
+#: standalone/scannerdrake:593
 #: standalone/scannerdrake:610
 #, fuzzy, c-format
 msgid "No remote machines"
@@ -10797,17 +11399,8 @@ msgstr "Mengimport giliran CUPS ..."
 
 #: printer/printerdrake.pm:107
 #, fuzzy, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Kepada on dalam lokal on on Semua dalam dalam utama dalam lokal IP dan."
+msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
+msgstr "Kepada on dalam lokal on on Semua dalam dalam utama dalam lokal IP dan."
 
 #: printer/printerdrake.pm:115
 #, fuzzy, c-format
@@ -10816,14 +11409,7 @@ msgstr "Menu alat mod teks"
 
 #: printer/printerdrake.pm:116
 #, fuzzy, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Turning on this allows to print plain text files in Japanese language. Only use this function if you really want to print text in Japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print Japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine."
 msgstr "on biasa fail dalam dalam dalam dan on on on on."
 
 #: printer/printerdrake.pm:123
@@ -10834,21 +11420,19 @@ msgstr "Comment=Penyelarasan Proksi Automatik"
 #: printer/printerdrake.pm:125
 #, fuzzy, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
+"When this option is turned on, on every startup of CUPS it is automatically made sure that\n"
 "\n"
 "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
 "\n"
 "- if /etc/cups/cupsd.conf is missing, it will be created\n"
 "\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."
 msgstr "on on off."
 
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
+#: printer/printerdrake.pm:138
+#: printer/printerdrake.pm:506
 #: printer/printerdrake.pm:4520
 #, c-format
 msgid "Remote CUPS server and no local CUPS daemon"
@@ -10859,31 +11443,28 @@ msgstr ""
 msgid "On"
 msgstr "On"
 
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
+#: printer/printerdrake.pm:143
+#: printer/printerdrake.pm:498
 #: printer/printerdrake.pm:525
 #, c-format
 msgid "Off"
 msgstr "Off"
 
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
+#: printer/printerdrake.pm:144
+#: printer/printerdrake.pm:507
 #, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
+msgid "In this mode the local CUPS daemon will be stopped and all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."
 msgstr ""
 
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
+#: printer/printerdrake.pm:161
+#: printer/printerdrake.pm:236
 #, fuzzy, c-format
 msgid "Sharing of local printers"
 msgstr "Perkongsian fail tempatan"
 
 #: printer/printerdrake.pm:162
 #, fuzzy, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
+msgid "These are the machines and networks on which the locally connected printer(s) should be available:"
 msgstr "dan on:"
 
 #: printer/printerdrake.pm:173
@@ -10901,18 +11482,19 @@ msgstr "Sunting ciri-ciri direktori yang dipilih"
 msgid "Remove selected host/network"
 msgstr "Buang hos dalam DNS"
 
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
+#: printer/printerdrake.pm:219
+#: printer/printerdrake.pm:229
+#: printer/printerdrake.pm:241
+#: printer/printerdrake.pm:248
+#: printer/printerdrake.pm:279
+#: printer/printerdrake.pm:297
 #, fuzzy, c-format
 msgid "IP address of host/network:"
 msgstr "Pemutus Seri Rangkaian - Alamat IP"
 
 #: printer/printerdrake.pm:237
 #, fuzzy, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Choose the network or host on which the local printers should be made available:"
 msgstr "on lokal:"
 
 #: printer/printerdrake.pm:244
@@ -10925,7 +11507,8 @@ msgstr "Rangkaian: DHCP atau alamat IP"
 msgid "The entered host/network IP is not correct.\n"
 msgstr "IP"
 
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
+#: printer/printerdrake.pm:253
+#: printer/printerdrake.pm:429
 #, fuzzy, c-format
 msgid "Examples for correct IPs:\n"
 msgstr "Pilih peranti bersiri yang betul bagi tetikus."
@@ -10935,17 +11518,15 @@ msgstr "Pilih peranti bersiri yang betul bagi tetikus."
 msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr "dalam"
 
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
+#: printer/printerdrake.pm:346
+#: printer/printerdrake.pm:416
 #, fuzzy, c-format
 msgid "Accessing printers on remote CUPS servers"
 msgstr "on"
 
 #: printer/printerdrake.pm:347
 #, fuzzy, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network."
 msgstr "Tambah lokal."
 
 #: printer/printerdrake.pm:358
@@ -10983,7 +11564,8 @@ msgstr "IP jauh pelayan X"
 msgid "The entered IP is not correct.\n"
 msgstr "IP '%s' yang anda masukkan bukan IP yang sah."
 
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:2133
+#: printer/printerdrake.pm:440
+#: printer/printerdrake.pm:2133
 #, fuzzy, c-format
 msgid "The port number should be an integer!"
 msgstr "Port FTP mestilah nombor."
@@ -10993,52 +11575,80 @@ msgstr "Port FTP mestilah nombor."
 msgid "This server is already in the list, it cannot be added again.\n"
 msgstr "dalam"
 
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:2160
-#: standalone/drakups:251 standalone/harddrake2:52
+#: printer/printerdrake.pm:462
+#: printer/printerdrake.pm:2160
+#: standalone/drakups:251
+#: standalone/harddrake2:52
 #, c-format
 msgid "Port"
 msgstr "Port"
 
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
+#: printer/printerdrake.pm:495
+#: printer/printerdrake.pm:511
+#: printer/printerdrake.pm:526
+#: printer/printerdrake.pm:530
 #: printer/printerdrake.pm:536
 #, fuzzy, c-format
 msgid "On, Name or IP of remote server:"
 msgstr "on lpd"
 
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4529
+#: printer/printerdrake.pm:514
+#: printer/printerdrake.pm:4529
 #: printer/printerdrake.pm:4595
 #, fuzzy, c-format
 msgid "CUPS server name or IP address missing."
 msgstr "Hos IP."
 
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:811 printer/printerdrake.pm:880
-#: printer/printerdrake.pm:901 printer/printerdrake.pm:927
-#: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065
-#: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110
-#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2489
-#: printer/printerdrake.pm:2523 printer/printerdrake.pm:2598
-#: printer/printerdrake.pm:2640 printer/printerdrake.pm:2677
-#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2961
-#: printer/printerdrake.pm:2966 printer/printerdrake.pm:3114
-#: printer/printerdrake.pm:3225 printer/printerdrake.pm:3839
-#: printer/printerdrake.pm:3906 printer/printerdrake.pm:3955
-#: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068
-#: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198
-#: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229
-#: printer/printerdrake.pm:4320 printer/printerdrake.pm:4415
-#: printer/printerdrake.pm:4421 printer/printerdrake.pm:4449
-#: printer/printerdrake.pm:4556 printer/printerdrake.pm:4665
-#: printer/printerdrake.pm:4685 printer/printerdrake.pm:4694
-#: printer/printerdrake.pm:4709 printer/printerdrake.pm:4910
-#: printer/printerdrake.pm:5385 printer/printerdrake.pm:5468
-#: standalone/printerdrake:75 standalone/printerdrake:590
+#: printer/printerdrake.pm:566
+#: printer/printerdrake.pm:586
+#: printer/printerdrake.pm:811
+#: printer/printerdrake.pm:880
+#: printer/printerdrake.pm:901
+#: printer/printerdrake.pm:927
+#: printer/printerdrake.pm:1023
+#: printer/printerdrake.pm:1065
+#: printer/printerdrake.pm:1075
+#: printer/printerdrake.pm:1110
+#: printer/printerdrake.pm:2220
+#: printer/printerdrake.pm:2489
+#: printer/printerdrake.pm:2523
+#: printer/printerdrake.pm:2598
+#: printer/printerdrake.pm:2640
+#: printer/printerdrake.pm:2677
+#: printer/printerdrake.pm:2688
+#: printer/printerdrake.pm:2961
+#: printer/printerdrake.pm:2966
+#: printer/printerdrake.pm:3114
+#: printer/printerdrake.pm:3225
+#: printer/printerdrake.pm:3839
+#: printer/printerdrake.pm:3906
+#: printer/printerdrake.pm:3955
+#: printer/printerdrake.pm:3958
+#: printer/printerdrake.pm:4068
+#: printer/printerdrake.pm:4126
+#: printer/printerdrake.pm:4198
+#: printer/printerdrake.pm:4219
+#: printer/printerdrake.pm:4229
+#: printer/printerdrake.pm:4320
+#: printer/printerdrake.pm:4415
+#: printer/printerdrake.pm:4421
+#: printer/printerdrake.pm:4449
+#: printer/printerdrake.pm:4556
+#: printer/printerdrake.pm:4665
+#: printer/printerdrake.pm:4685
+#: printer/printerdrake.pm:4694
+#: printer/printerdrake.pm:4709
+#: printer/printerdrake.pm:4910
+#: printer/printerdrake.pm:5385
+#: printer/printerdrake.pm:5468
+#: standalone/printerdrake:75
+#: standalone/printerdrake:590
 #, c-format
 msgid "Printerdrake"
 msgstr "Printerdrake"
 
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4127
+#: printer/printerdrake.pm:567
+#: printer/printerdrake.pm:4127
 #: printer/printerdrake.pm:4666
 #, fuzzy, c-format
 msgid "Reading printer data..."
@@ -11051,14 +11661,12 @@ msgstr "/_Konfigurasikan CUPS"
 
 #: printer/printerdrake.pm:614
 #, c-format
-msgid ""
-"Allow pop-up windows, printer setup and package installation may be canceled"
+msgid "Allow pop-up windows, printer setup and package installation may be canceled"
 msgstr ""
 
 #: printer/printerdrake.pm:616
 #, c-format
-msgid ""
-"No pop-up windows, printer setup and package installation cannot be canceled"
+msgid "No pop-up windows, printer setup and package installation cannot be canceled"
 msgstr ""
 
 #: printer/printerdrake.pm:622
@@ -11068,9 +11676,7 @@ msgstr "Name= Pengurusan Sistem"
 
 #: printer/printerdrake.pm:623
 #, c-format
-msgid ""
-"Here you can configure printer administration tasks which should be done "
-"automatically."
+msgid "Here you can configure printer administration tasks which should be done automatically."
 msgstr ""
 
 #: printer/printerdrake.pm:626
@@ -11078,7 +11684,8 @@ msgstr ""
 msgid "Do automatic configuration of new printers"
 msgstr "Guna konfigurasi IP dinamik (BOOTP/DHCP)"
 
-#: printer/printerdrake.pm:627 printer/printerdrake.pm:641
+#: printer/printerdrake.pm:627
+#: printer/printerdrake.pm:641
 #, fuzzy, c-format
 msgid "when a USB printer is connected and turned on"
 msgstr "dan on"
@@ -11096,8 +11703,7 @@ msgstr ""
 #: printer/printerdrake.pm:640
 #, fuzzy, c-format
 msgid "Re-enable disabled printers"
-msgstr ""
-"JavaScript dimatikan (global). Hidupkan JavaScript<A HREF=\"%1\">di sini</A>."
+msgstr "JavaScript dimatikan (global). Hidupkan JavaScript<A HREF=\"%1\">di sini</A>."
 
 #: printer/printerdrake.pm:644
 #, fuzzy, c-format
@@ -11111,10 +11717,7 @@ msgstr "dihantar kepada pencetak `%s'"
 
 #: printer/printerdrake.pm:682
 #, c-format
-msgid ""
-"Here you can configure how errors during the communication between your "
-"computer and the printer \"%s\" should be handled (for example if the "
-"printer is not turned on)."
+msgid "Here you can configure how errors during the communication between your computer and the printer \"%s\" should be handled (for example if the printer is not turned on)."
 msgstr ""
 
 #: printer/printerdrake.pm:686
@@ -11147,7 +11750,8 @@ msgstr "nombor kumpulan"
 msgid "Delay between retries (in sec)"
 msgstr ""
 
-#: printer/printerdrake.pm:745 printer/printerdrake.pm:765
+#: printer/printerdrake.pm:745
+#: printer/printerdrake.pm:765
 #, fuzzy, c-format
 msgid "Select Printer Connection"
 msgstr "Anda mesti pilih model pencetak."
@@ -11161,22 +11765,20 @@ msgstr "Hidup"
 #, fuzzy, c-format
 msgid ""
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected."
 msgstr "on."
 
-#: printer/printerdrake.pm:751 printer/printerdrake.pm:4912
+#: printer/printerdrake.pm:751
+#: printer/printerdrake.pm:4912
 #, c-format
 msgid ""
 "\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
+"WARNING: No local network connection active, remote printers can neither be detected nor tested!"
 msgstr ""
 
 #: printer/printerdrake.pm:758
 #, fuzzy, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
+msgid "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
 msgstr "dan SMB"
 
 #: printer/printerdrake.pm:760
@@ -11191,10 +11793,7 @@ msgstr ""
 
 #: printer/printerdrake.pm:768
 #, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
+msgid "The longer you choose the timeout, the more reliable the detections of network printers will be, but the scan can take longer then, especially if there are many machines with local firewalls in the network. "
 msgstr ""
 
 #: printer/printerdrake.pm:772
@@ -11260,8 +11859,7 @@ msgstr "tidak diketahui"
 
 #: printer/printerdrake.pm:846
 #, fuzzy, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
+msgid "There are no printers found which are directly connected to your machine"
 msgstr "tidak"
 
 #: printer/printerdrake.pm:849
@@ -11271,9 +11869,7 @@ msgstr "dan on"
 
 #: printer/printerdrake.pm:862
 #, fuzzy, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+msgid "Do you want to enable printing on the printers mentioned above or on printers in the local network?\n"
 msgstr "on on dalam lokal"
 
 #: printer/printerdrake.pm:863
@@ -11293,9 +11889,7 @@ msgstr "on"
 
 #: printer/printerdrake.pm:867
 #, fuzzy, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid "NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed."
 msgstr "on dan."
 
 #: printer/printerdrake.pm:884
@@ -11325,28 +11919,21 @@ msgstr "Tiada pemacu ditemui (pencetak baru)"
 
 #: printer/printerdrake.pm:986
 #, c-format
-msgid ""
-"The following new printers were found and Printerdrake can automatically set "
-"them up for you. If you do not want to have all of them set up, unselect the "
-"ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
+msgid "The following new printers were found and Printerdrake can automatically set them up for you. If you do not want to have all of them set up, unselect the ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
 msgstr ""
 
 #: printer/printerdrake.pm:987
 #, c-format
-msgid ""
-"The following new printer was found and printerdrake can automatically set "
-"it up for you. If you do not want to have it set up, unselect it, or click "
-"\"Cancel\".\n"
+msgid "The following new printer was found and printerdrake can automatically set it up for you. If you do not want to have it set up, unselect it, or click \"Cancel\".\n"
 msgstr ""
 
 #: printer/printerdrake.pm:988
 #, c-format
-msgid ""
-"Note that for certain printer models additional packages need to be "
-"installed. So keep your installation media handy.\n"
+msgid "Note that for certain printer models additional packages need to be installed. So keep your installation media handy.\n"
 msgstr ""
 
-#: printer/printerdrake.pm:1024 printer/printerdrake.pm:1066
+#: printer/printerdrake.pm:1024
+#: printer/printerdrake.pm:1066
 #, fuzzy, c-format
 msgid "Configuring printer on %s..."
 msgstr "Pencetak setempat pada %1"
@@ -11361,17 +11948,20 @@ msgstr "("
 msgid " on "
 msgstr " on "
 
-#: printer/printerdrake.pm:1051 standalone/scannerdrake:137
+#: printer/printerdrake.pm:1051
+#: standalone/scannerdrake:137
 #, c-format
 msgid ")"
 msgstr ")"
 
-#: printer/printerdrake.pm:1056 printer/printerdrake.pm:3126
+#: printer/printerdrake.pm:1056
+#: printer/printerdrake.pm:3126
 #, fuzzy, c-format
 msgid "Printer model selection"
 msgstr "Anda mesti pilih model pencetak."
 
-#: printer/printerdrake.pm:1057 printer/printerdrake.pm:3127
+#: printer/printerdrake.pm:1057
+#: printer/printerdrake.pm:3127
 #, fuzzy, c-format
 msgid "Which printer model do you have?"
 msgstr "Anda mesti pilih model pencetak."
@@ -11381,18 +11971,17 @@ msgstr "Anda mesti pilih model pencetak."
 msgid ""
 "\n"
 "\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list."
 msgstr ""
 
-#: printer/printerdrake.pm:1061 printer/printerdrake.pm:3132
+#: printer/printerdrake.pm:1061
+#: printer/printerdrake.pm:3132
 #, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "If your printer is not listed, choose a compatible (see printer manual) or a similar one."
 msgstr ""
 
-#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4686
+#: printer/printerdrake.pm:1076
+#: printer/printerdrake.pm:4686
 #, fuzzy, c-format
 msgid "Configuring printer \"%s\"..."
 msgstr "Pencetak Tidak Diketahui"
@@ -11406,28 +11995,28 @@ msgstr ""
 
 #: printer/printerdrake.pm:1112
 #, c-format
-msgid ""
-"You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's "
-"main menu. "
+msgid "You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's main menu. "
 msgstr ""
 
-#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4962
+#: printer/printerdrake.pm:1112
+#: printer/printerdrake.pm:4962
 #, fuzzy, c-format
 msgid "Configure Auto Administration"
 msgstr "Auto-kesan dan konfigurasi kad bunyi"
 
 #: printer/printerdrake.pm:1113
 #, c-format
-msgid ""
-"There you can also choose in which situation automatic printer setup is done "
-"(On Printerdrake startup, on printing system startup, when connecting a new "
-"USB printer)."
+msgid "There you can also choose in which situation automatic printer setup is done (On Printerdrake startup, on printing system startup, when connecting a new USB printer)."
 msgstr ""
 
-#: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273
-#: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401
-#: printer/printerdrake.pm:2459 printer/printerdrake.pm:2543
-#: printer/printerdrake.pm:4929 printer/printerdrake.pm:5116
+#: printer/printerdrake.pm:1261
+#: printer/printerdrake.pm:1273
+#: printer/printerdrake.pm:1380
+#: printer/printerdrake.pm:2401
+#: printer/printerdrake.pm:2459
+#: printer/printerdrake.pm:2543
+#: printer/printerdrake.pm:4929
+#: printer/printerdrake.pm:5116
 #, fuzzy, c-format
 msgid "Add a new printer"
 msgstr "_Tambah pelayan baru"
@@ -11438,12 +12027,9 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+"This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.\n"
 "\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types."
 msgstr "lokal dan dalam dan dan."
 
 #: printer/printerdrake.pm:1275
@@ -11452,20 +12038,13 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
+"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n"
 "\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
+"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n"
 "\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
+"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you do not need it.\n"
 "\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
 msgstr ""
 "Tetingkap dalam dan on dan Tetingkap dan on on off dan Tetingkap\n"
 " on Berikutnya dan on Batal."
@@ -11476,14 +12055,11 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
+"This wizard will help you to install your printer(s) connected to this computer.\n"
 "\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
+"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.\n"
 "\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
 msgstr ""
 "dalam dan on\n"
 " on Berikutnya dan on Batal."
@@ -11494,19 +12070,13 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
+"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n"
 "\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n"
 "\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
+"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you do not need it.\n"
 "\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
 msgstr ""
 "dalam on dan on dan on on off\n"
 " on Berikutnya dan on Batal."
@@ -11517,14 +12087,11 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
+"This wizard will help you to install your printer(s) connected to this computer.\n"
 "\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
 "\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
 msgstr ""
 "dalam on dan on\n"
 " on Berikutnya dan on Batal."
@@ -11555,20 +12122,23 @@ msgid ""
 "\n"
 "Congratulations, your printer is now installed and configured!\n"
 "\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
+"You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n"
 "\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
+"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the %s Control Center."
 msgstr "dan dalam Fail default dalam Perkakasan."
 
-#: printer/printerdrake.pm:1417 printer/printerdrake.pm:1641
-#: printer/printerdrake.pm:1704 printer/printerdrake.pm:1796
-#: printer/printerdrake.pm:1934 printer/printerdrake.pm:2010
-#: printer/printerdrake.pm:2177 printer/printerdrake.pm:2268
-#: printer/printerdrake.pm:2277 printer/printerdrake.pm:2286
-#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2495
+#: printer/printerdrake.pm:1417
+#: printer/printerdrake.pm:1641
+#: printer/printerdrake.pm:1704
+#: printer/printerdrake.pm:1796
+#: printer/printerdrake.pm:1934
+#: printer/printerdrake.pm:2010
+#: printer/printerdrake.pm:2177
+#: printer/printerdrake.pm:2268
+#: printer/printerdrake.pm:2277
+#: printer/printerdrake.pm:2286
+#: printer/printerdrake.pm:2297
+#: printer/printerdrake.pm:2495
 #: printer/printerdrake.pm:2610
 #, fuzzy, c-format
 msgid "Could not install the %s packages!"
@@ -11579,8 +12149,10 @@ msgstr "Tidak dapat buang pakej"
 msgid "Skipping Windows/SMB server auto-detection"
 msgstr ""
 
-#: printer/printerdrake.pm:1425 printer/printerdrake.pm:1564
-#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
+#: printer/printerdrake.pm:1425
+#: printer/printerdrake.pm:1564
+#: printer/printerdrake.pm:1802
+#: printer/printerdrake.pm:2064
 #, fuzzy, c-format
 msgid "Printer auto-detection"
 msgstr "Auto lilit baris"
@@ -11605,7 +12177,8 @@ msgstr "on SMB Tetingkap"
 msgid "Detected %s"
 msgstr "Media Dikesan"
 
-#: printer/printerdrake.pm:1463 printer/printerdrake.pm:1490
+#: printer/printerdrake.pm:1463
+#: printer/printerdrake.pm:1490
 #: printer/printerdrake.pm:1505
 #, fuzzy, c-format
 msgid "Printer on parallel port #%s"
@@ -11628,11 +12201,7 @@ msgstr "Edit Pencetak Lokal"
 
 #: printer/printerdrake.pm:1551
 #, fuzzy, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+msgid "No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr "Tidak lokal Kepada secara manual fail dalam USB USB."
 
 #: printer/printerdrake.pm:1555
@@ -11655,49 +12224,41 @@ msgstr "Tetapkan pencetak"
 msgid "Available printers"
 msgstr "Tetapkan pencetak"
 
-#: printer/printerdrake.pm:1578 printer/printerdrake.pm:1587
+#: printer/printerdrake.pm:1578
+#: printer/printerdrake.pm:1587
 #, fuzzy, c-format
 msgid "The following printer was auto-detected. "
 msgstr "Peranti audio berikut telah dikesan."
 
 #: printer/printerdrake.pm:1580
 #, fuzzy, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+msgid "If it is not the one you want to configure, enter a device name/file name in the input line"
 msgstr "fail dalam"
 
 #: printer/printerdrake.pm:1581
 #, fuzzy, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+msgid "Alternatively, you can specify a device name/file name in the input line"
 msgstr "fail dalam"
 
-#: printer/printerdrake.pm:1582 printer/printerdrake.pm:1591
+#: printer/printerdrake.pm:1582
+#: printer/printerdrake.pm:1591
 #, c-format
 msgid "Here is a list of all auto-detected printers. "
 msgstr ""
 
 #: printer/printerdrake.pm:1584
 #, fuzzy, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+msgid "Please choose the printer you want to set up or enter a device name/file name in the input line"
 msgstr "fail dalam"
 
 #: printer/printerdrake.pm:1585
 #, fuzzy, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+msgid "Please choose the printer to which the print jobs should go or enter a device name/file name in the input line"
 msgstr "fail dalam"
 
 #: printer/printerdrake.pm:1589
 #, fuzzy, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
 msgstr "on."
 
 #: printer/printerdrake.pm:1590
@@ -11707,11 +12268,7 @@ msgstr "tidak"
 
 #: printer/printerdrake.pm:1593
 #, fuzzy, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
 msgstr "on."
 
 #: printer/printerdrake.pm:1594
@@ -11721,9 +12278,7 @@ msgstr ""
 
 #: printer/printerdrake.pm:1596
 #, fuzzy, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+msgid "Please choose the port that your printer is connected to or enter a device name/file name in the input line"
 msgstr "fail dalam"
 
 #: printer/printerdrake.pm:1597
@@ -11733,9 +12288,7 @@ msgstr ""
 
 #: printer/printerdrake.pm:1599
 #, fuzzy, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr "USB USB."
 
 #: printer/printerdrake.pm:1603
@@ -11743,11 +12296,16 @@ msgstr "USB USB."
 msgid "You must choose/enter a printer/device!"
 msgstr ""
 
-#: printer/printerdrake.pm:1643 printer/printerdrake.pm:1706
-#: printer/printerdrake.pm:1798 printer/printerdrake.pm:1936
-#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2179
-#: printer/printerdrake.pm:2270 printer/printerdrake.pm:2279
-#: printer/printerdrake.pm:2288 printer/printerdrake.pm:2299
+#: printer/printerdrake.pm:1643
+#: printer/printerdrake.pm:1706
+#: printer/printerdrake.pm:1798
+#: printer/printerdrake.pm:1936
+#: printer/printerdrake.pm:2012
+#: printer/printerdrake.pm:2179
+#: printer/printerdrake.pm:2270
+#: printer/printerdrake.pm:2279
+#: printer/printerdrake.pm:2288
+#: printer/printerdrake.pm:2299
 #, fuzzy, c-format
 msgid "Aborting"
 msgstr "ralat memuatkan %1, berhenti\n"
@@ -11759,9 +12317,7 @@ msgstr "LPD - Line Printer Daemon"
 
 #: printer/printerdrake.pm:1680
 #, fuzzy, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+msgid "To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."
 msgstr "Kepada lpd dan on."
 
 #: printer/printerdrake.pm:1681
@@ -11784,38 +12340,50 @@ msgstr "Kehilangan nama fail selepas -C"
 msgid "Remote printer name missing!"
 msgstr "Kehilangan nama fail selepas -C"
 
-#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
-#: printer/printerdrake.pm:2318 standalone/drakTermServ:447
-#: standalone/drakTermServ:769 standalone/drakTermServ:785
-#: standalone/drakTermServ:1591 standalone/drakTermServ:1600
-#: standalone/drakTermServ:1614 standalone/drakbackup:512
-#: standalone/drakbackup:618 standalone/drakbackup:653
-#: standalone/drakbackup:754 standalone/draknfs:203
-#: standalone/draksambashare:629 standalone/draksambashare:796
+#: printer/printerdrake.pm:1719
+#: printer/printerdrake.pm:2195
+#: printer/printerdrake.pm:2318
+#: standalone/drakTermServ:447
+#: standalone/drakTermServ:769
+#: standalone/drakTermServ:785
+#: standalone/drakTermServ:1591
+#: standalone/drakTermServ:1600
+#: standalone/drakTermServ:1614
+#: standalone/drakbackup:512
+#: standalone/drakbackup:618
+#: standalone/drakbackup:653
+#: standalone/drakbackup:754
+#: standalone/draknfs:203
+#: standalone/draksambashare:629
+#: standalone/draksambashare:796
 #: standalone/harddrake2:276
 #, c-format
 msgid "Information"
 msgstr "Maklumat"
 
-#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
+#: printer/printerdrake.pm:1719
+#: printer/printerdrake.pm:2195
 #: printer/printerdrake.pm:2318
 #, fuzzy, c-format
 msgid "Detected model: %s %s"
 msgstr "Model Keselamatan:"
 
-#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
+#: printer/printerdrake.pm:1802
+#: printer/printerdrake.pm:2064
 #, fuzzy, c-format
 msgid "Scanning network..."
 msgstr "Rangkaian tidak dapat dicapai."
 
-#: printer/printerdrake.pm:1814 printer/printerdrake.pm:1835
+#: printer/printerdrake.pm:1814
+#: printer/printerdrake.pm:1835
 #, fuzzy, c-format
 msgid ", printer \"%s\" on server \"%s\""
 msgstr ""
 "Keluar Had Masa pada pelayan\n"
 "%1"
 
-#: printer/printerdrake.pm:1817 printer/printerdrake.pm:1838
+#: printer/printerdrake.pm:1817
+#: printer/printerdrake.pm:1838
 #, fuzzy, c-format
 msgid "Printer \"%s\" on server \"%s\""
 msgstr ""
@@ -11829,18 +12397,12 @@ msgstr "SMB Tetingkap"
 
 #: printer/printerdrake.pm:1860
 #, fuzzy, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+msgid "To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information."
 msgstr "Kepada SMB SMB IP dan IP dan pengguna dan."
 
 #: printer/printerdrake.pm:1861
 #, fuzzy, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid " If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed."
 msgstr "dan pengguna dan."
 
 #: printer/printerdrake.pm:1863
@@ -11853,7 +12415,8 @@ msgstr "Nama _Hos Pelayan:"
 msgid "SMB server IP"
 msgstr "IP jauh pelayan X"
 
-#: printer/printerdrake.pm:1865 standalone/draksambashare:67
+#: printer/printerdrake.pm:1865
+#: standalone/draksambashare:67
 #, c-format
 msgid "Share name"
 msgstr "Nama perkongsian"
@@ -11886,43 +12449,27 @@ msgstr "Amaran Keselamatan"
 #: printer/printerdrake.pm:1891
 #, fuzzy, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
 "\n"
-msgstr ""
-"Tetingkap dalam dalam Tetingkap pengguna on on dalam lokal Tetingkap on "
-"Tetingkap Tetingkap dalam"
+msgstr "Tetingkap dalam dalam Tetingkap pengguna on on dalam lokal Tetingkap on Tetingkap Tetingkap dalam"
 
 #: printer/printerdrake.pm:1901
 #, fuzzy, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
 "\n"
 msgstr "Tetingkap dan dalam"
 
 #: printer/printerdrake.pm:1904
 #, fuzzy, c-format
 msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
+"Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.\n"
 "\n"
 "Do you really want to continue setting up this printer as you are doing now?"
 msgstr "Sambung dan Tetingkap?"
@@ -11934,11 +12481,7 @@ msgstr "Data Pencetak Novell Netware (NCP)"
 
 #: printer/printerdrake.pm:1984
 #, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+msgid "To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."
 msgstr "Kepada on IP dan pengguna dan."
 
 #: printer/printerdrake.pm:1985
@@ -11961,12 +12504,14 @@ msgstr "Kehilangan nama fail selepas -C"
 msgid "NCP queue name missing!"
 msgstr "Kehilangan nama fail selepas -C"
 
-#: printer/printerdrake.pm:2076 printer/printerdrake.pm:2097
+#: printer/printerdrake.pm:2076
+#: printer/printerdrake.pm:2097
 #, fuzzy, c-format
 msgid ", host \"%s\", port %s"
 msgstr "nombor port"
 
-#: printer/printerdrake.pm:2079 printer/printerdrake.pm:2100
+#: printer/printerdrake.pm:2079
+#: printer/printerdrake.pm:2100
 #, fuzzy, c-format
 msgid "Host \"%s\", port %s"
 msgstr "nombor port"
@@ -11978,18 +12523,12 @@ msgstr ""
 
 #: printer/printerdrake.pm:2124
 #, fuzzy, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+msgid "Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields."
 msgstr "IP dan default dalam."
 
 #: printer/printerdrake.pm:2125
 #, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+msgid "To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware."
 msgstr "Kepada soket IP dan default on."
 
 #: printer/printerdrake.pm:2129
@@ -12007,17 +12546,15 @@ msgstr ""
 msgid "Refreshing Device URI list..."
 msgstr "export / import senarai peranti (default)"
 
-#: printer/printerdrake.pm:2224 printer/printerdrake.pm:2226
+#: printer/printerdrake.pm:2224
+#: printer/printerdrake.pm:2226
 #, fuzzy, c-format
 msgid "Printer Device URI"
 msgstr "Peranti Pencetak Lokal"
 
 #: printer/printerdrake.pm:2225
 #, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."
 msgstr ""
 
 #: printer/printerdrake.pm:2249
@@ -12032,9 +12569,7 @@ msgstr "Laksanakan arahan luaran"
 
 #: printer/printerdrake.pm:2355
 #, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid "Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."
 msgstr ""
 
 #: printer/printerdrake.pm:2356
@@ -12052,17 +12587,20 @@ msgstr "arahan mesti diberi dengan satu penyesuaian"
 msgid "Your printer %s is currently connected %s."
 msgstr ""
 
-#: printer/printerdrake.pm:2404 printer/printerdrake.pm:2411
+#: printer/printerdrake.pm:2404
+#: printer/printerdrake.pm:2411
 #, fuzzy, c-format
 msgid "to a parallel port"
 msgstr "gagal membuka liang `%s' (%s)\n"
 
-#: printer/printerdrake.pm:2405 printer/printerdrake.pm:2412
+#: printer/printerdrake.pm:2405
+#: printer/printerdrake.pm:2412
 #, fuzzy, c-format
 msgid "to the USB"
 msgstr "Peranti USB"
 
-#: printer/printerdrake.pm:2406 printer/printerdrake.pm:2413
+#: printer/printerdrake.pm:2406
+#: printer/printerdrake.pm:2413
 #, fuzzy, c-format
 msgid "via the network"
 msgstr "Rangkaian tidak dapat dicapai."
@@ -12079,8 +12617,7 @@ msgstr ""
 
 #: printer/printerdrake.pm:2415
 #, c-format
-msgid ""
-"You can now set up your device with HPLIP anyway (works in many cases), "
+msgid "You can now set up your device with HPLIP anyway (works in many cases), "
 msgstr ""
 
 #: printer/printerdrake.pm:2416
@@ -12100,9 +12637,7 @@ msgstr ""
 
 #: printer/printerdrake.pm:2419
 #, c-format
-msgid ""
-"You can always revise your choice by clicking your printer's entry in the "
-"main window, "
+msgid "You can always revise your choice by clicking your printer's entry in the main window, "
 msgstr ""
 
 #: printer/printerdrake.pm:2420
@@ -12111,9 +12646,14 @@ msgid "clicking the \"%s\" button, "
 msgstr "tombol pertolongan"
 
 #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: printer/printerdrake.pm:2420 standalone/drakperm:124 standalone/drakups:302
-#: standalone/drakups:362 standalone/drakups:382 standalone/drakvpn:319
-#: standalone/drakvpn:680 standalone/printerdrake:245
+#: printer/printerdrake.pm:2420
+#: standalone/drakperm:124
+#: standalone/drakups:302
+#: standalone/drakups:362
+#: standalone/drakups:382
+#: standalone/drakvpn:319
+#: standalone/drakvpn:680
+#: standalone/printerdrake:245
 #, c-format
 msgid "Edit"
 msgstr "Edit"
@@ -12123,23 +12663,27 @@ msgstr "Edit"
 msgid "and choosing \"%s\"."
 msgstr "Segerakkan %s dan %s@%s:%s"
 
-#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5312
+#: printer/printerdrake.pm:2421
+#: printer/printerdrake.pm:5312
 #: printer/printerdrake.pm:5372
 #, fuzzy, c-format
 msgid "Printer connection type"
 msgstr "Jenis perhubungan tidak diketahui"
 
-#: printer/printerdrake.pm:2423 standalone/logdrake:409
+#: printer/printerdrake.pm:2423
+#: standalone/logdrake:409
 #, fuzzy, c-format
 msgid "What do you want to do?"
 msgstr "Apa yang anda ingin lakukan sekarang?"
 
-#: printer/printerdrake.pm:2424 printer/printerdrake.pm:2427
+#: printer/printerdrake.pm:2424
+#: printer/printerdrake.pm:2427
 #, fuzzy, c-format
 msgid "Set up with HPLIP"
 msgstr "Utama: menetapkan tetingkap\n"
 
-#: printer/printerdrake.pm:2425 printer/printerdrake.pm:2429
+#: printer/printerdrake.pm:2425
+#: printer/printerdrake.pm:2429
 #, fuzzy, c-format
 msgid "Set up without HPLIP"
 msgstr "Utama: menetapkan tetingkap\n"
@@ -12151,18 +12695,12 @@ msgstr "Tetapan rangkaian"
 
 #: printer/printerdrake.pm:2460
 #, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
+msgid "On many HP printers there are special functions available, maintenance (ink level checking, nozzle cleaning. head alignment, ...) on all not too old inkjets, scanning on multi-function devices, and memory card access on printers with card readers. "
 msgstr ""
 
 #: printer/printerdrake.pm:2462
 #, c-format
-msgid ""
-"To access these extra functions on HP printers they must be set up with "
-"HPLIP (HP Linux Imaging and Printing). "
+msgid "To access these extra functions on HP printers they must be set up with HPLIP (HP Linux Imaging and Printing). "
 msgstr ""
 
 #: printer/printerdrake.pm:2464
@@ -12175,7 +12713,8 @@ msgstr ""
 msgid "Installing %s package..."
 msgstr "Install pakej `%s' (%s/%s)..."
 
-#: printer/printerdrake.pm:2490 printer/printerdrake.pm:2496
+#: printer/printerdrake.pm:2490
+#: printer/printerdrake.pm:2496
 #: printer/printerdrake.pm:2524
 #, c-format
 msgid "HPLIP"
@@ -12231,7 +12770,8 @@ msgstr "peranti tidak sah %s %s"
 msgid "Making printer port available for CUPS..."
 msgstr ""
 
-#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2962
+#: printer/printerdrake.pm:2688
+#: printer/printerdrake.pm:2962
 #: printer/printerdrake.pm:3115
 #, fuzzy, c-format
 msgid "Reading printer database..."
@@ -12242,12 +12782,14 @@ msgstr "Membaca stat pengkalan data pakej..."
 msgid "Enter Printer Name and Comments"
 msgstr "Anda mesti masukkan nama projek dan fail"
 
-#: printer/printerdrake.pm:2924 printer/printerdrake.pm:4183
+#: printer/printerdrake.pm:2924
+#: printer/printerdrake.pm:4183
 #, fuzzy, c-format
 msgid "Name of printer should contain only letters, numbers and the underscore"
 msgstr "Nama dan"
 
-#: printer/printerdrake.pm:2930 printer/printerdrake.pm:4188
+#: printer/printerdrake.pm:2930
+#: printer/printerdrake.pm:4188
 #, c-format
 msgid ""
 "The printer \"%s\" already exists,\n"
@@ -12256,17 +12798,12 @@ msgstr ""
 
 #: printer/printerdrake.pm:2937
 #, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
+msgid "The printer name \"%s\" has more than 12 characters which can make the printer unaccessible from Windows clients. Do you really want to use this name?"
 msgstr ""
 
 #: printer/printerdrake.pm:2946
 #, fuzzy, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users."
 msgstr "Huraian dan Lokasi dalam."
 
 #: printer/printerdrake.pm:2947
@@ -12274,14 +12811,17 @@ msgstr "Huraian dan Lokasi dalam."
 msgid "Name of printer"
 msgstr "Nama Pencetak"
 
-#: printer/printerdrake.pm:2948 standalone/drakconnect:592
-#: standalone/harddrake2:39 standalone/printerdrake:224
+#: printer/printerdrake.pm:2948
+#: standalone/drakconnect:592
+#: standalone/harddrake2:39
+#: standalone/printerdrake:224
 #: standalone/printerdrake:231
 #, c-format
 msgid "Description"
 msgstr "Huraian"
 
-#: printer/printerdrake.pm:2949 standalone/printerdrake:224
+#: printer/printerdrake.pm:2949
+#: standalone/printerdrake:224
 #: standalone/printerdrake:231
 #, c-format
 msgid "Location"
@@ -12300,24 +12840,21 @@ msgstr "Anda mesti pilih model pencetak."
 #: printer/printerdrake.pm:3094
 #, fuzzy, c-format
 msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n"
 "\n"
 "For your printer Printerdrake has found:\n"
 "\n"
 "%s"
 msgstr "dalam dalam dan dan secara manual secara manual on"
 
-#: printer/printerdrake.pm:3099 printer/printerdrake.pm:3102
+#: printer/printerdrake.pm:3099
+#: printer/printerdrake.pm:3102
 #, fuzzy, c-format
 msgid "The model is correct"
 msgstr "Adakah tetapan ini betul?"
 
-#: printer/printerdrake.pm:3100 printer/printerdrake.pm:3101
+#: printer/printerdrake.pm:3100
+#: printer/printerdrake.pm:3101
 #: printer/printerdrake.pm:3104
 #, fuzzy, c-format
 msgid "Select model manually"
@@ -12328,9 +12865,7 @@ msgstr "Anda mesti pilih model pencetak."
 msgid ""
 "\n"
 "\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted."
 msgstr "Cari dalam."
 
 #: printer/printerdrake.pm:3147
@@ -12340,16 +12875,12 @@ msgstr ""
 
 #: printer/printerdrake.pm:3179
 #, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
+msgid "Every PostScript printer is delivered with a PPD file which describes the printer's options and features."
 msgstr ""
 
 #: printer/printerdrake.pm:3180
 #, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
+msgid "This file is usually somewhere on the CD with the Windows and Mac drivers delivered with the printer."
 msgstr ""
 
 #: printer/printerdrake.pm:3181
@@ -12359,24 +12890,17 @@ msgstr ""
 
 #: printer/printerdrake.pm:3182
 #, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
+msgid "If you have Windows installed on your machine, you can find the PPD file on your Windows partition, too."
 msgstr ""
 
 #: printer/printerdrake.pm:3183
 #, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
+msgid "Installing the printer's PPD file and using it when setting up the printer makes all options of the printer available which are provided by the printer's hardware"
 msgstr ""
 
 #: printer/printerdrake.pm:3184
 #, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
+msgid "Here you can choose the PPD file to be installed on your machine, it will then be used for the setup of your printer."
 msgstr ""
 
 #: printer/printerdrake.pm:3186
@@ -12384,16 +12908,22 @@ msgstr ""
 msgid "Install PPD file from"
 msgstr "Fail untuk dimasukkan [daripada %s] "
 
-#: printer/printerdrake.pm:3189 printer/printerdrake.pm:3197
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
+#: printer/printerdrake.pm:3189
+#: printer/printerdrake.pm:3197
+#: standalone/scannerdrake:183
+#: standalone/scannerdrake:192
+#: standalone/scannerdrake:242
+#: standalone/scannerdrake:250
 #, fuzzy, c-format
 msgid "Floppy Disk"
 msgstr "Masukkan cakera liut"
 
-#: printer/printerdrake.pm:3190 printer/printerdrake.pm:3199
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
+#: printer/printerdrake.pm:3190
+#: printer/printerdrake.pm:3199
+#: standalone/scannerdrake:184
+#: standalone/scannerdrake:194
+#: standalone/scannerdrake:243
+#: standalone/scannerdrake:252
 #, fuzzy, c-format
 msgid "Other place"
 msgstr "Port lain"
@@ -12406,8 +12936,7 @@ msgstr "Pilih Fail Log"
 #: printer/printerdrake.pm:3209
 #, fuzzy, c-format
 msgid "The PPD file %s does not exist or is unreadable!"
-msgstr ""
-"Menamatkan, <p>Fail <strong>%1</strong> tidak wujud atau tidak boleh dibaca."
+msgstr "Menamatkan, <p>Fail <strong>%1</strong> tidak wujud atau tidak boleh dibaca."
 
 #: printer/printerdrake.pm:3215
 #, c-format
@@ -12428,38 +12957,23 @@ msgstr "Konfigurasi Pemuat But"
 #, fuzzy, c-format
 msgid ""
 "You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."
 msgstr "dan."
 
-#: printer/printerdrake.pm:3371 printer/printerdrake.pm:3401
+#: printer/printerdrake.pm:3371
+#: printer/printerdrake.pm:3401
 #, fuzzy, c-format
 msgid "Lexmark inkjet configuration"
 msgstr "Konfigurasi Pemuat But"
 
 #: printer/printerdrake.pm:3372
 #, fuzzy, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."
 msgstr "lokal tidak on lokal on."
 
 #: printer/printerdrake.pm:3402
 #, fuzzy, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."
 msgstr "Kepada danhttp://www.lexmark.com/ on dan Batal dan."
 
 #: printer/printerdrake.pm:3412
@@ -12469,11 +12983,7 @@ msgstr "Konfigurasi Pemuat But"
 
 #: printer/printerdrake.pm:3413
 #, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
+msgid "The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes. Please connect your printer to a local USB port or configure it on the machine where it is connected to."
 msgstr "lokal tidak on lokal on."
 
 #: printer/printerdrake.pm:3435
@@ -12481,13 +12991,10 @@ msgstr "lokal tidak on lokal on."
 msgid "Samsung ML/QL-85G configuration"
 msgstr "Status konfigurasi bagi %s %s\n"
 
-#: printer/printerdrake.pm:3436 printer/printerdrake.pm:3463
+#: printer/printerdrake.pm:3436
+#: printer/printerdrake.pm:3463
 #, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
+msgid "The driver for this printer only supports printers locally connected on the first parallel port, no printers on remote machines or print server boxes or on other parallel ports. Please connect your printer to the first parallel port or configure it on the machine where it is connected to."
 msgstr "lokal tidak on lokal on."
 
 #: printer/printerdrake.pm:3462
@@ -12502,11 +13009,7 @@ msgstr "Bunyi"
 
 #: printer/printerdrake.pm:3490
 #, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes or on the parallel "
-"port. Please connect your printer to the USB or configure it on the machine "
-"where it is directly connected to."
+msgid "The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes or on the parallel port. Please connect your printer to the USB or configure it on the machine where it is directly connected to."
 msgstr "lokal tidak on lokal on."
 
 #: printer/printerdrake.pm:3497
@@ -12519,10 +13022,7 @@ msgstr ""
 msgid ""
 "Printer default settings\n"
 "\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."
 msgstr "default dan dan."
 
 #: printer/printerdrake.pm:3772
@@ -12561,9 +13061,7 @@ msgstr "Laman maya:\n"
 #, fuzzy, c-format
 msgid ""
 "Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."
 msgstr "dan on keluar Masuk."
 
 #: printer/printerdrake.pm:3860
@@ -12635,36 +13133,28 @@ msgstr "Pencetak Tidak Diketahui"
 
 #: printer/printerdrake.pm:4004
 #, fuzzy, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+msgid "To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
 msgstr "Kepada fail<file><file><file> dan"
 
 #: printer/printerdrake.pm:4006
 #, fuzzy, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
 msgstr "dalam Cetakan fail fail"
 
-#: printer/printerdrake.pm:4009 printer/printerdrake.pm:4026
+#: printer/printerdrake.pm:4009
+#: printer/printerdrake.pm:4026
 #: printer/printerdrake.pm:4036
 #, c-format
 msgid ""
 "\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". "
 msgstr ""
 
-#: printer/printerdrake.pm:4012 printer/printerdrake.pm:4052
+#: printer/printerdrake.pm:4012
+#: printer/printerdrake.pm:4052
 #, fuzzy, c-format
 msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n"
 "\n"
 msgstr "Kepada on"
 
@@ -12675,54 +13165,42 @@ msgid ""
 "\n"
 msgstr ""
 
-#: printer/printerdrake.pm:4021 printer/printerdrake.pm:4031
+#: printer/printerdrake.pm:4021
+#: printer/printerdrake.pm:4031
 #, fuzzy, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+msgid "To print a file from the command line (terminal window) use the command \"%s <file>\".\n"
 msgstr "Kepada fail<file>"
 
-#: printer/printerdrake.pm:4023 printer/printerdrake.pm:4033
+#: printer/printerdrake.pm:4023
+#: printer/printerdrake.pm:4033
 #: printer/printerdrake.pm:4043
 #, fuzzy, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
 msgstr "dalam Cetakan fail fail"
 
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4038
+#: printer/printerdrake.pm:4028
+#: printer/printerdrake.pm:4038
 #, fuzzy, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "To get a list of the options available for the current printer click on the \"Print option list\" button."
 msgstr "Kepada on."
 
 #: printer/printerdrake.pm:4041
 #, fuzzy, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+msgid "To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".\n"
 msgstr "Kepada fail<file><file>"
 
 #: printer/printerdrake.pm:4045
 #, fuzzy, c-format
 msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+"You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
 msgstr "dan KDE on"
 
 #: printer/printerdrake.pm:4049
 #, fuzzy, c-format
 msgid ""
 "\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".\n"
 msgstr "dan<file>"
 
 #: printer/printerdrake.pm:4058
@@ -12748,62 +13226,50 @@ msgstr "kehilangan senarai posisi"
 #: printer/printerdrake.pm:4087
 #, c-format
 msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
+"Your %s is set up with HP's HPLIP driver software. This way many special features of your printer are supported.\n"
 "\n"
 msgstr ""
 
 #: printer/printerdrake.pm:4090
 #, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
+msgid "The scanner in your printer can be used with the usual SANE software, for example Kooka or XSane (Both in the Multimedia/Graphics menu). "
 msgstr ""
 
 #: printer/printerdrake.pm:4091
 #, c-format
 msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
+"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to share your scanner on the network.\n"
 "\n"
 msgstr ""
 
 #: printer/printerdrake.pm:4095
 #, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
+msgid "The memory card readers in your printer can be accessed like a usual USB mass storage device. "
 msgstr ""
 
 #: printer/printerdrake.pm:4096
 #, c-format
 msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
+"After inserting a card a hard disk icon to access the card should appear on your desktop.\n"
 "\n"
 msgstr ""
 
 #: printer/printerdrake.pm:4098
 #, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
+msgid "The memory card readers in your printer can be accessed using HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access Photo Cards...\" button on the \"Functions\" tab. "
 msgstr ""
 
 #: printer/printerdrake.pm:4099
 #, c-format
 msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
+"Note that this is very slow, reading the pictures from the camera or a USB card reader is usually faster.\n"
 "\n"
 msgstr ""
 
 #: printer/printerdrake.pm:4102
 #, c-format
 msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
+"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a lot of status monitoring and maintenance functions for your %s:\n"
 "\n"
 msgstr ""
 
@@ -12827,7 +13293,8 @@ msgstr "_Guna dua kelapa"
 msgid " - Color calibration\n"
 msgstr "Tentukuran Berjaya"
 
-#: printer/printerdrake.pm:4147 printer/printerdrake.pm:4174
+#: printer/printerdrake.pm:4147
+#: printer/printerdrake.pm:4174
 #: printer/printerdrake.pm:4209
 #, fuzzy, c-format
 msgid "Transfer printer configuration"
@@ -12836,25 +13303,18 @@ msgstr "Konfigurasi Pemuat But"
 #: printer/printerdrake.pm:4148
 #, fuzzy, c-format
 msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
+"You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.\n"
 "Not all queues can be transferred due to the following reasons:\n"
 msgstr "siap Semua dan default"
 
 #: printer/printerdrake.pm:4151
 #, fuzzy, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+msgid "CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.\n"
 msgstr "on"
 
 #: printer/printerdrake.pm:4153
 #, fuzzy, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+msgid "PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.\n"
 msgstr "lokal dan"
 
 #: printer/printerdrake.pm:4155
@@ -12864,17 +13324,14 @@ msgstr "dan"
 
 #: printer/printerdrake.pm:4157
 #, fuzzy, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred."
 msgstr "Masuk."
 
 #: printer/printerdrake.pm:4158
 #, fuzzy, c-format
 msgid ""
 "\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred."
 msgstr "fail."
 
 #: printer/printerdrake.pm:4159
@@ -12890,7 +13347,8 @@ msgstr "dan."
 msgid "Do not transfer printers"
 msgstr "Katalaluan itu tidak sepadan"
 
-#: printer/printerdrake.pm:4163 printer/printerdrake.pm:4179
+#: printer/printerdrake.pm:4163
+#: printer/printerdrake.pm:4179
 #, c-format
 msgid "Transfer"
 msgstr "Pemindahan"
@@ -12915,9 +13373,7 @@ msgstr "Memindahkan mesej..."
 
 #: printer/printerdrake.pm:4210
 #, fuzzy, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?"
 msgstr "default default?"
 
 #: printer/printerdrake.pm:4220
@@ -12930,7 +13386,8 @@ msgstr "Data Pencetak Windows (SMB)"
 msgid "Starting network..."
 msgstr "Memulakan daemon palam rangkaian: "
 
-#: printer/printerdrake.pm:4274 printer/printerdrake.pm:4278
+#: printer/printerdrake.pm:4274
+#: printer/printerdrake.pm:4278
 #: printer/printerdrake.pm:4280
 #, fuzzy, c-format
 msgid "Configure the network now"
@@ -12943,11 +13400,7 @@ msgstr "Firewall tidak dikonfigurasikan."
 
 #: printer/printerdrake.pm:4276
 #, fuzzy, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+msgid "You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"
 msgstr "on?"
 
 #: printer/printerdrake.pm:4279
@@ -12957,20 +13410,12 @@ msgstr "Pergi ke on"
 
 #: printer/printerdrake.pm:4310
 #, fuzzy, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
+msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessible after booting your system and correct the configuration using the %s Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the %s Control Center, section \"Hardware\"/\"Printer\""
 msgstr "siap dan Rangkaian Internet dan Perkakasan"
 
 #: printer/printerdrake.pm:4311
 #, fuzzy, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again."
 msgstr "dan dan."
 
 #: printer/printerdrake.pm:4321
@@ -12996,14 +13441,9 @@ msgstr "dalam"
 #: printer/printerdrake.pm:4355
 #, fuzzy, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"You are about to install the printing system %s on a system running in the %s security level.\n"
 "\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessible by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.\n"
 "\n"
 "Do you really want to configure printing on this machine?"
 msgstr "on dalam dan dan default dalam on?"
@@ -13016,15 +13456,11 @@ msgstr ""
 #: printer/printerdrake.pm:4392
 #, fuzzy, c-format
 msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"The printing system (%s) will not be started automatically when the machine is booted.\n"
 "\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.\n"
 "\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to have the automatic starting of the printing system turned on again?"
 msgstr "off on?"
 
 #: printer/printerdrake.pm:4415
@@ -13054,18 +13490,12 @@ msgstr "Ralat sistem yang tidak diketahui"
 
 #: printer/printerdrake.pm:4521
 #, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
+msgid "In this mode there is no local printing system, all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."
 msgstr ""
 
 #: printer/printerdrake.pm:4523
 #, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
+msgid "Enter the host name or IP of your CUPS server and click OK if you want to use this mode, click \"Quit\" otherwise."
 msgstr ""
 
 #: printer/printerdrake.pm:4537
@@ -13095,18 +13525,12 @@ msgstr ""
 
 #: printer/printerdrake.pm:4581
 #, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
+msgid "Then locally connected printers can be used and remote printers on other CUPS servers in the same network are automatically discovered. "
 msgstr ""
 
 #: printer/printerdrake.pm:4582
 #, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
+msgid "Disadvantage of this approach is, that more resources on the local machine are needed: Additional software packages need to be installed, the CUPS daemon has to run in the background and needs some memory, and the IPP port (port 631) is opened. "
 msgstr ""
 
 #: printer/printerdrake.pm:4584
@@ -13116,17 +13540,12 @@ msgstr ""
 
 #: printer/printerdrake.pm:4585
 #, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
+msgid "Here local resource occupation is reduced to a minimum. No CUPS daemon is started or port opened, no software infrastructure for setting up local print queues is installed, so less memory and disk space is used. "
 msgstr ""
 
 #: printer/printerdrake.pm:4586
 #, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
+msgid "Disadvantage is that it is not possible to define local printers then and if the specified server is down it cannot be printed at all from this machine. "
 msgstr ""
 
 #: printer/printerdrake.pm:4588
@@ -13134,8 +13553,10 @@ msgstr ""
 msgid "How should CUPS be set up on your machine?"
 msgstr ""
 
-#: printer/printerdrake.pm:4592 printer/printerdrake.pm:4607
-#: printer/printerdrake.pm:4611 printer/printerdrake.pm:4617
+#: printer/printerdrake.pm:4592
+#: printer/printerdrake.pm:4607
+#: printer/printerdrake.pm:4611
+#: printer/printerdrake.pm:4617
 #, c-format
 msgid "Remote server, specify Name or IP here:"
 msgstr ""
@@ -13172,10 +13593,7 @@ msgstr ""
 
 #: printer/printerdrake.pm:4911
 #, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
+msgid "The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it. "
 msgstr "on default."
 
 #: printer/printerdrake.pm:4941
@@ -13208,8 +13626,10 @@ msgstr "Mod bantuan"
 msgid "Expert Mode"
 msgstr "Mod bantuan"
 
-#: printer/printerdrake.pm:5262 printer/printerdrake.pm:5318
-#: printer/printerdrake.pm:5404 printer/printerdrake.pm:5413
+#: printer/printerdrake.pm:5262
+#: printer/printerdrake.pm:5318
+#: printer/printerdrake.pm:5404
+#: printer/printerdrake.pm:5413
 #, fuzzy, c-format
 msgid "Printer options"
 msgstr ""
@@ -13238,54 +13658,66 @@ msgstr "Proses perakaunan dimatikan."
 msgid "Do it!"
 msgstr "Sunt_ing..."
 
-#: printer/printerdrake.pm:5313 printer/printerdrake.pm:5378
+#: printer/printerdrake.pm:5313
+#: printer/printerdrake.pm:5378
 #, c-format
 msgid "Printer name, description, location"
 msgstr ""
 
-#: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397
+#: printer/printerdrake.pm:5315
+#: printer/printerdrake.pm:5397
 #, fuzzy, c-format
 msgid "Printer manufacturer, model, driver"
 msgstr "Menghentikan daemon driver printer oki4daemon: "
 
-#: printer/printerdrake.pm:5316 printer/printerdrake.pm:5398
+#: printer/printerdrake.pm:5316
+#: printer/printerdrake.pm:5398
 #, fuzzy, c-format
 msgid "Printer manufacturer, model"
 msgstr "Anda mesti pilih model pencetak."
 
-#: printer/printerdrake.pm:5320 printer/printerdrake.pm:5408
+#: printer/printerdrake.pm:5320
+#: printer/printerdrake.pm:5408
 #, fuzzy, c-format
 msgid "Set this printer as the default"
 msgstr "Tetap Baris ini sebagai Heading"
 
-#: printer/printerdrake.pm:5325 printer/printerdrake.pm:5414
-#: printer/printerdrake.pm:5416 printer/printerdrake.pm:5425
+#: printer/printerdrake.pm:5325
+#: printer/printerdrake.pm:5414
+#: printer/printerdrake.pm:5416
+#: printer/printerdrake.pm:5425
 #, fuzzy, c-format
 msgid "Enable Printer"
 msgstr "Pencetak Tidak Diketahui"
 
-#: printer/printerdrake.pm:5328 printer/printerdrake.pm:5419
-#: printer/printerdrake.pm:5420 printer/printerdrake.pm:5422
+#: printer/printerdrake.pm:5328
+#: printer/printerdrake.pm:5419
+#: printer/printerdrake.pm:5420
+#: printer/printerdrake.pm:5422
 #, fuzzy, c-format
 msgid "Disable Printer"
 msgstr "Pencetak Tidak Diketahui"
 
-#: printer/printerdrake.pm:5332 printer/printerdrake.pm:5426
+#: printer/printerdrake.pm:5332
+#: printer/printerdrake.pm:5426
 #, fuzzy, c-format
 msgid "Printer communication error handling"
 msgstr "Terdapat ralat komunikasi dengan pelayan: %s"
 
-#: printer/printerdrake.pm:5333 printer/printerdrake.pm:5430
+#: printer/printerdrake.pm:5333
+#: printer/printerdrake.pm:5430
 #, fuzzy, c-format
 msgid "Print test pages"
 msgstr "[%s (%s): %d halaman pada 1 helaian]\n"
 
-#: printer/printerdrake.pm:5334 printer/printerdrake.pm:5432
+#: printer/printerdrake.pm:5334
+#: printer/printerdrake.pm:5432
 #, c-format
 msgid "Learn how to use this printer"
 msgstr ""
 
-#: printer/printerdrake.pm:5335 printer/printerdrake.pm:5434
+#: printer/printerdrake.pm:5335
+#: printer/printerdrake.pm:5434
 #, fuzzy, c-format
 msgid "Remove printer"
 msgstr "Pencetak Tidak Diketahui"
@@ -13355,16 +13787,23 @@ msgstr ""
 msgid "Could not set permissions of firmware file %s!"
 msgstr "Tidak dapat menetapkan keizinan %o pada salinan %s: %s"
 
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
+#: scanner.pm:200
+#: standalone/scannerdrake:66
+#: standalone/scannerdrake:70
+#: standalone/scannerdrake:78
+#: standalone/scannerdrake:346
+#: standalone/scannerdrake:382
+#: standalone/scannerdrake:446
+#: standalone/scannerdrake:490
+#: standalone/scannerdrake:494
+#: standalone/scannerdrake:516
+#: standalone/scannerdrake:581
 #, c-format
 msgid "Scannerdrake"
 msgstr "Scannerdrake"
 
-#: scanner.pm:201 standalone/scannerdrake:947
+#: scanner.pm:201
+#: standalone/scannerdrake:947
 #, c-format
 msgid "Could not install the packages needed to share your scanner(s)."
 msgstr ""
@@ -13422,9 +13861,7 @@ msgstr ""
 
 #: security/help.pm:33
 #, fuzzy, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+msgid "Allow/Forbid the list of users on the system on display managers (kdm and gdm)."
 msgstr "on on dan."
 
 #: security/help.pm:35
@@ -13461,15 +13898,13 @@ msgstr "on."
 msgid ""
 "Authorize:\n"
 "\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
+"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to \"ALL\",\n"
 "\n"
 "- only local ones if set to \"LOCAL\"\n"
 "\n"
 "- none if set to \"NONE\".\n"
 "\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
+"To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5))."
 msgstr "hos lokal tiada hos hos."
 
 #: security/help.pm:63
@@ -13506,7 +13941,8 @@ msgid ""
 "\"%s\" is true, also reports to syslog."
 msgstr ""
 
-#: security/help.pm:80 standalone/draksec:215
+#: security/help.pm:80
+#: standalone/draksec:215
 #, fuzzy, c-format
 msgid "Security Alerts:"
 msgstr "Model Keselamatan:"
@@ -13533,8 +13969,7 @@ msgstr ""
 
 #: security/help.pm:90
 #, fuzzy, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid " Enabling su only from members of the wheel group or allow su from any user."
 msgstr "pengguna."
 
 #: security/help.pm:92
@@ -13574,9 +14009,7 @@ msgstr ""
 
 #: security/help.pm:106
 #, fuzzy, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters."
 msgstr "dan dan."
 
 #: security/help.pm:108
@@ -13653,8 +14086,7 @@ msgstr "ya."
 
 #: security/help.pm:127
 #, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "if set, send the mail report to this email address else send it to root."
 msgstr ""
 
 #: security/help.pm:128
@@ -13992,41 +14424,30 @@ msgstr "Internet tidak."
 
 #: security/level.pm:44
 #, fuzzy, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Passwords are now enabled, but use as a networked computer is still not recommended."
 msgstr "Katalaluan dihidupkan."
 
 #: security/level.pm:45
 #, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "This is the standard security recommended for a computer that will be used to connect to the Internet as a client."
 msgstr "Internet."
 
 #: security/level.pm:46
 #, fuzzy, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+msgid "There are already some restrictions, and more automatic checks are run every night."
 msgstr "dan."
 
 #: security/level.pm:47
 #, fuzzy, c-format
 msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+"With this security level, the use of this system as a server becomes possible.\n"
+"The security is now high enough to use the system as a server which can accept\n"
+"connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level."
 msgstr "terima on Internet."
 
 #: security/level.pm:50
 #, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+msgid "This is similar to the previous level, but the system is entirely closed and security features are at their maximum."
 msgstr "dan."
 
 #: security/level.pm:55
@@ -14051,8 +14472,7 @@ msgstr "Untuk Kegunaan Dalaman Sahaja"
 
 #: security/level.pm:64
 #, fuzzy, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "A library which defends against buffer overflow and format string attacks."
 msgstr "A dan."
 
 #: security/level.pm:65
@@ -14088,16 +14508,14 @@ msgstr "dan."
 #, fuzzy, c-format
 msgid ""
 "cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
+"at periodic scheduled times. vixie cron adds a number of features to the basic\n"
 "UNIX cron, including better security and more powerful configuration options."
 msgstr "pengguna asas dan."
 
 #: services.pm:28
 #, c-format
 msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
+"FAM is a file monitoring daemon. It is used to get reports when files change.\n"
 "It is used by GNOME and KDE"
 msgstr ""
 
@@ -14105,8 +14523,7 @@ msgstr ""
 #, fuzzy, c-format
 msgid ""
 "GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste operations,\n"
 "and includes support for pop-up menus on the console."
 msgstr "dan on."
 
@@ -14119,18 +14536,15 @@ msgstr "dan."
 
 #: services.pm:35
 #, fuzzy, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgid "Apache is a World Wide Web server. It is used to serve HTML files and CGI."
 msgstr "fail dan."
 
 #: services.pm:36
 #, fuzzy, c-format
 msgid ""
 "The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
+"variety of other internet services as needed. It is responsible for starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables\n"
 "all of the services it is responsible for."
 msgstr "dan."
 
@@ -14184,9 +14598,7 @@ msgstr "Pelayan dan."
 
 #: services.pm:54
 #, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+msgid "named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."
 msgstr "Domain Nama Pelayan IP."
 
 #: services.pm:55
@@ -14234,8 +14646,7 @@ msgstr "dan."
 #, fuzzy, c-format
 msgid ""
 "PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
+"modems in laptops.  It will not get started unless configured so it is safe to have\n"
 "it installed on machines that do not need it."
 msgstr "dan dalam on."
 
@@ -14243,16 +14654,13 @@ msgstr "dan dalam on."
 #, fuzzy, c-format
 msgid ""
 "The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
+"protocols such as NFS and NIS. The portmap server must be running on machines\n"
 "which act as servers for protocols which make use of the RPC mechanism."
 msgstr "dan NIS on protokol."
 
 #: services.pm:73
 #, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."
 msgstr "Mel."
 
 #: services.pm:74
@@ -14320,12 +14728,14 @@ msgstr ""
 msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
 msgstr "Font Pelayan."
 
-#: services.pm:115 services.pm:157
+#: services.pm:115
+#: services.pm:157
 #, c-format
 msgid "Choose which services should be automatically started at boot time"
 msgstr ""
 
-#: services.pm:127 standalone/draksambashare:111
+#: services.pm:127
+#: standalone/draksambashare:111
 #, c-format
 msgid "Printing"
 msgstr "Cetakan"
@@ -14372,7 +14782,8 @@ msgid ""
 "about this service, sorry."
 msgstr "Tidak."
 
-#: services.pm:224 ugtk2.pm:1009
+#: services.pm:224
+#: ugtk2.pm:1009
 #, c-format
 msgid "Info"
 msgstr "Maklumat"
@@ -14544,16 +14955,12 @@ msgstr "StesyenKerja Default"
 
 #: share/compssUsers.pl:28
 #, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
+msgid "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets (OpenOffice.org Calc, Kspread), PDF viewers, etc"
 msgstr ""
 
 #: share/compssUsers.pl:29
 #, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
+msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
 msgstr ""
 
 #: share/compssUsers.pl:34
@@ -14583,9 +14990,7 @@ msgstr "Internet Bergrafik"
 
 #: share/compssUsers.pl:45
 #, fuzzy, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
+msgid "Set of tools to read and send mail and news (mutt, tin..) and to browse the Web"
 msgstr "dan dan dan"
 
 #: share/compssUsers.pl:50
@@ -14618,27 +15023,32 @@ msgstr "Alatan Pentadbiran"
 msgid "Editors, shells, file tools, terminals"
 msgstr "Penyunting fail"
 
-#: share/compssUsers.pl:66 share/compssUsers.pl:170
+#: share/compssUsers.pl:66
+#: share/compssUsers.pl:170
 #, fuzzy, c-format
 msgid "C and C++ development libraries, programs and include files"
 msgstr "Pustaka dan fail selitan untuk Oaf."
 
-#: share/compssUsers.pl:70 share/compssUsers.pl:174
+#: share/compssUsers.pl:70
+#: share/compssUsers.pl:174
 #, c-format
 msgid "Documentation"
 msgstr "Dokumentasi"
 
-#: share/compssUsers.pl:71 share/compssUsers.pl:175
+#: share/compssUsers.pl:71
+#: share/compssUsers.pl:175
 #, fuzzy, c-format
 msgid "Books and Howto's on Linux and Free Software"
 msgstr "dan on dan Bebas"
 
-#: share/compssUsers.pl:75 share/compssUsers.pl:178
+#: share/compssUsers.pl:75
+#: share/compssUsers.pl:178
 #, c-format
 msgid "LSB"
 msgstr "LSB"
 
-#: share/compssUsers.pl:76 share/compssUsers.pl:179
+#: share/compssUsers.pl:76
+#: share/compssUsers.pl:179
 #, fuzzy, c-format
 msgid "Linux Standard Base. Third party applications support"
 msgstr "Asas"
@@ -14658,12 +15068,14 @@ msgstr "Groupware"
 msgid "Kolab Server"
 msgstr "Pelayan Kolab"
 
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
+#: share/compssUsers.pl:93
+#: share/compssUsers.pl:134
 #, fuzzy, c-format
 msgid "Firewall/Router"
 msgstr "_Konfigurasikan Firewall"
 
-#: share/compssUsers.pl:94 share/compssUsers.pl:135
+#: share/compssUsers.pl:94
+#: share/compssUsers.pl:135
 #, fuzzy, c-format
 msgid "Internet gateway"
 msgstr "Gateway Tidak Sah"
@@ -14713,7 +15125,8 @@ msgstr "(%ld)PELAYAN >>> %s"
 msgid "NFS Server, Samba server"
 msgstr "Konfigurasi Pelayan Samba"
 
-#: share/compssUsers.pl:117 share/compssUsers.pl:130
+#: share/compssUsers.pl:117
+#: share/compssUsers.pl:130
 #, c-format
 msgid "Database"
 msgstr "Pangkalan Data"
@@ -14765,9 +15178,7 @@ msgstr "StesyenKerja Default"
 
 #: share/compssUsers.pl:148
 #, fuzzy, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
+msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
 msgstr "Desktop Persekitaran asas"
 
 #: share/compssUsers.pl:152
@@ -14777,9 +15188,7 @@ msgstr "StesyenKerja Default"
 
 #: share/compssUsers.pl:153
 #, fuzzy, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
+msgid "A graphical environment with user-friendly set of applications and desktop tools"
 msgstr "A pengguna dan"
 
 #: share/compssUsers.pl:156
@@ -14802,7 +15211,9 @@ msgstr ""
 msgid "Utilities"
 msgstr "Utiliti"
 
-#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384
+#: share/compssUsers.pl:186
+#: share/compssUsers.pl:187
+#: standalone/logdrake:384
 #, fuzzy, c-format
 msgid "SSH Server"
 msgstr "(%ld)PELAYAN >>> %s"
@@ -14864,8 +15275,7 @@ msgid ""
 "--default             : save default directories.\n"
 "--debug               : show all debug messages.\n"
 "--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
+"--config-info         : explain configuration file options (for non-X users).\n"
 "--daemon              : use daemon configuration. \n"
 "--help                : show this message.\n"
 "--version             : show version number.\n"
@@ -14938,12 +15348,9 @@ msgid ""
 "--start          : start MTS\n"
 "--stop           : stop MTS\n"
 "--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"--deluser        : delete an existing system user from MTS (requires username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)"
 msgstr "Pelayan mula mula pengguna pengguna IP IP"
 
 #: standalone.pm:96
@@ -14979,11 +15386,9 @@ msgstr "Comment=Foomatic (CUPS, LPRng, PDQ)"
 #, fuzzy, c-format
 msgid ""
 "[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
+"  --no-confirmation      do not ask first confirmation question in Mandriva Update mode\n"
 "  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
+"  --changelog-first      display changelog before filelist in the description window\n"
 "  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
 msgstr ""
 "\n"
@@ -14994,9 +15399,7 @@ msgstr ""
 
 #: standalone.pm:113
 #, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-usbtable] [--dynamic=dev]"
 msgstr ""
 
 #: standalone.pm:114
@@ -15011,8 +15414,7 @@ msgstr ""
 #, c-format
 msgid ""
 "\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version] "
 msgstr ""
 
 #: standalone/XFdrake:59
@@ -15030,26 +15432,24 @@ msgstr "keluar dan Ctrl Alt"
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "keluar dan dalam"
 
-#: standalone/drakTermServ:102 standalone/drakTermServ:108
+#: standalone/drakTermServ:102
+#: standalone/drakTermServ:108
 #, fuzzy, c-format
 msgid "%s: %s requires a username...\n"
 msgstr "Nama Pengguna _Unix:"
 
 #: standalone/drakTermServ:119
 #, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s memerlukan namahos, alamat MAC, IP, imej-nbi, 0/1 untuk THIN_CLIENT, "
-"0/1 untuk Local Config...\n"
+msgid "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...\n"
+msgstr "%s: %s memerlukan namahos, alamat MAC, IP, imej-nbi, 0/1 untuk THIN_CLIENT, 0/1 untuk Local Config...\n"
 
 #: standalone/drakTermServ:125
 #, fuzzy, c-format
 msgid "%s: %s requires hostname...\n"
 msgstr "Tetapkan namahos:"
 
-#: standalone/drakTermServ:207 standalone/drakTermServ:210
+#: standalone/drakTermServ:207
+#: standalone/drakTermServ:210
 #, fuzzy, c-format
 msgid "Terminal Server Configuration"
 msgstr "Alatan Konfigurasi Pelayan"
@@ -15109,12 +15509,14 @@ msgstr "Imej"
 msgid "Clients/Users"
 msgstr "Pengg_una Samba..."
 
-#: standalone/drakTermServ:289 standalone/drakbug:47
+#: standalone/drakTermServ:289
+#: standalone/drakbug:47
 #, c-format
 msgid "First Time Wizard"
 msgstr " Wizard Kali Pertama"
 
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
+#: standalone/drakTermServ:326
+#: standalone/drakTermServ:327
 #, c-format
 msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
 msgstr ""
@@ -15129,15 +15531,11 @@ msgid ""
 "\t\n"
 "After doing these steps, the wizard will:\n"
 "\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
+"    a) Make all nbis.                                                                \n"
+"    b) Activate the server.                                                          \n"
+"    c) Start the server.                                                     \n"
 "    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
+"       are added to the shadow$$CLIENT$$ file.                                              \n"
 "    e) Ask you to make a boot floppy.\n"
 "    f) If it's thin clients, ask if you want to restart KDM.\n"
 msgstr ""
@@ -15165,10 +15563,8 @@ msgstr ""
 #: standalone/drakTermServ:426
 #, c-format
 msgid ""
-"Please select default client type (Fat is the default type if 'Use thin' is "
-"unchecked).\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
+"Please select default client type (Fat is the default type if 'Use thin' is unchecked).\n"
+"    'Thin' clients run everything off the server's CPU/RAM, using the client display.\n"
 "    'Fat' clients use their own CPU/RAM but the server's filesystem."
 msgstr ""
 
@@ -15177,18 +15573,21 @@ msgstr ""
 msgid "Creating net boot images for all kernels"
 msgstr ""
 
-#: standalone/drakTermServ:447 standalone/drakTermServ:769
+#: standalone/drakTermServ:447
+#: standalone/drakTermServ:769
 #: standalone/drakTermServ:785
 #, fuzzy, c-format
 msgid "This will take a few minutes."
 msgstr "Mengulangmuat Polisi. Ini mungkin mengambil masa seminit."
 
-#: standalone/drakTermServ:453 standalone/drakTermServ:493
+#: standalone/drakTermServ:453
+#: standalone/drakTermServ:493
 #, c-format
 msgid "Done!"
 msgstr "Selesai !"
 
-#: standalone/drakTermServ:464 standalone/drakTermServ:849
+#: standalone/drakTermServ:464
+#: standalone/drakTermServ:849
 #, fuzzy, c-format
 msgid "%s failed"
 msgstr "GAGAL"
@@ -15208,9 +15607,7 @@ msgstr ""
 
 #: standalone/drakTermServ:499
 #, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
+msgid "In order to enable changes made for thin clients, the display manager must be restarted. Restart now?"
 msgstr ""
 
 #: standalone/drakTermServ:534
@@ -15222,85 +15619,59 @@ msgstr "Klien Pelayan Terminal"
 #, c-format
 msgid ""
 "        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
+"        \tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
+"        \tmkinitrd-net does much of this work and drakTermServ is just a graphical \n"
+"        \tinterface to help manage/customize these images. To create the file \n"
+"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n"
+"        \tdhcpd.conf, you should create the etherboot images for at least one full kernel."
 msgstr ""
 
 #: standalone/drakTermServ:541
 #, c-format
 msgid ""
 "        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
+"        \tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP \n"
+"        \taddress and net boot images to the machine. drakTermServ helps create/remove \n"
 "        \tthese entries.\n"
 "\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
+"        \t(PCI cards may omit the image - etherboot will request the correct image. \n"
+"\t\t\tYou should also consider that when etherboot looks for the images, it expects \n"
 "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
 "\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
+"        \tA typical dhcpd.conf stanza to support a diskless client looks like:"
 msgstr ""
 
 #: standalone/drakTermServ:559
 #, c-format
 msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
+"        While you can use a pool of IP addresses, rather than setup a specific entry for\n"
+"        a client machine, using a fixed address scheme facilitates using the functionality\n"
 "        of client-specific configuration files that ClusterNFS provides.\n"
 "\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
+"        Note: The '#type' entry is only used by drakTermServ.  Clients can either be 'thin'\n"
+"        or 'fat'.  Thin clients run most software on the server via XDMCP, while fat clients run \n"
 "        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
+"        written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n"
+"        modified if thin clients are used, to enable XDMCP. Since there are security issues in \n"
+"        using XDMCP, hosts.deny and hosts.allow are modified to limit access to the local\n"
 "        subnet.\n"
 "\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
+"        Note: The '#hdw_config' entry is also only used by drakTermServ.  Clients can either \n"
+"        be 'true' or 'false'.  'true' enables root login at the client machine and allows local \n"
+"        hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n"
+"        by creating separate config files associated with the client's IP address and creating \n"
+"        read/write mount points to allow the client to alter the file. Once you are satisfied \n"
+"        with the configuration, you can remove root login privileges from the client.\n"
 "\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
+"        Note: You must stop/start the server after adding or changing clients."
 msgstr ""
 
 #: standalone/drakTermServ:579
 #, c-format
 msgid ""
 "        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
+"        \tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
+"        \tsets up the correct entry to allow anonymous access to the root filesystem from\n"
 "        \tdiskless clients.\n"
 "\n"
 "        \tA typical exports entry for clusternfs is:\n"
@@ -15315,21 +15686,17 @@ msgstr ""
 #, c-format
 msgid ""
 "        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
+"        \tFor users to be able to log into the system from a diskless client, their entry in\n"
 "        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
+"        \thelps in this respect by adding or removing system users from this file."
 msgstr ""
 
 #: standalone/drakTermServ:595
 #, c-format
 msgid ""
 "        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
+"        \tThrough clusternfs, each diskless client can have its own unique configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client hardware configuration, \n"
 "        \tdrakTermServ will help create these files."
 msgstr ""
 
@@ -15337,30 +15704,22 @@ msgstr ""
 #, c-format
 msgid ""
 "        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
+"        \tThrough clusternfs, each diskless client can have its own unique configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client hardware configuration, \n"
+"        \tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n"
 "        \t/etc/sysconfig/keyboard on a per-client basis.\n"
 "\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
+"        Note: Enabling local client hardware configuration does enable root login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local configuration can be\n"
+"        turned back off, retaining the configuration files, once the client machine is configured."
 msgstr ""
 
 #: standalone/drakTermServ:609
 #, c-format
 msgid ""
 "        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
+"        \tdrakTermServ will configure this file to work in conjunction with the images created\n"
+"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to \n"
 "        \teach diskless client.\n"
 "\n"
 "        \tA typical TFTP configuration file looks like:\n"
@@ -15376,10 +15735,8 @@ msgid ""
 "                        server_args  = -s /var/lib/tftpboot\n"
 "        \t}\n"
 "        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
+"        \tThe changes here from the default installation are changing the disable flag to\n"
+"        \t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
 "        \tputs its images."
 msgstr ""
 
@@ -15387,14 +15744,11 @@ msgstr ""
 #, c-format
 msgid ""
 "        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
+"        \tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
+"        \tor CD to initiate the boot sequence.  drakTermServ will help generate these\n"
 "        \timages, based on the NIC in the client machine.\n"
 "        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
+"        \tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
 "        \t\t\n"
 "        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
 msgstr ""
@@ -15444,7 +15798,8 @@ msgstr "Tiada monitor dipilih"
 msgid "Build Single NIC -->"
 msgstr "Bina Indeks Carian"
 
-#: standalone/drakTermServ:781 standalone/drakTermServ:1581
+#: standalone/drakTermServ:781
+#: standalone/drakTermServ:1581
 #, fuzzy, c-format
 msgid "No NIC selected!"
 msgstr "Tiada monitor dipilih"
@@ -15745,7 +16100,8 @@ msgstr "Auto Sambung semula ke Pelayan"
 msgid "Deleted %s...\n"
 msgstr "  %d %d%% dipadam"
 
-#: standalone/drakTermServ:1834 standalone/drakTermServ:1907
+#: standalone/drakTermServ:1834
+#: standalone/drakTermServ:1907
 #, fuzzy, c-format
 msgid "%s not found...\n"
 msgstr "\"%s\" tidak dijumpai"
@@ -15760,11 +16116,18 @@ msgstr "hos dan hos"
 msgid "Configuration changed - restart clusternfs/dhcpd?"
 msgstr "Konfigurasi berubah - mulakan semula clusternfs/dhcpd?"
 
-#: standalone/drakautoinst:38 standalone/drakhosts:123
-#: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
-#: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539
-#: standalone/draknfs:546 standalone/draksambashare:187
-#: standalone/draksambashare:208 standalone/draksambashare:631
+#: standalone/drakautoinst:38
+#: standalone/drakhosts:123
+#: standalone/drakhosts:129
+#: standalone/draknfs:84
+#: standalone/draknfs:105
+#: standalone/draknfs:444
+#: standalone/draknfs:447
+#: standalone/draknfs:539
+#: standalone/draknfs:546
+#: standalone/draksambashare:187
+#: standalone/draksambashare:208
+#: standalone/draksambashare:631
 #: standalone/draksambashare:798
 #, c-format
 msgid "Error!"
@@ -15783,15 +16146,11 @@ msgstr "Cakera liut Auto Pasang"
 #: standalone/drakautoinst:42
 #, fuzzy, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.\n"
 "\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+"With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.\n"
 "\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.\n"
 "\n"
 "Press ok to continue."
 msgstr "Install dan on dalam dan?"
@@ -15801,7 +16160,8 @@ msgstr "Install dan on dalam dan?"
 msgid "replay"
 msgstr "Main semula Log"
 
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
+#: standalone/drakautoinst:60
+#: standalone/drakautoinst:69
 #, c-format
 msgid "manual"
 msgstr "manual"
@@ -15813,12 +16173,11 @@ msgstr "<b>Konfigurasi proksi _automatik</b>"
 
 #: standalone/drakautoinst:65
 #, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "Please choose for each step whether it will replay like your install, or it will be manual"
 msgstr ""
 
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
+#: standalone/drakautoinst:77
+#: standalone/drakautoinst:78
 #: standalone/drakautoinst:92
 #, fuzzy, c-format
 msgid "Creating auto install floppy"
@@ -15867,9 +16226,7 @@ msgstr "%n item"
 
 #: standalone/drakbackup:156
 #, fuzzy, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
+msgid "Expect is an extension to the TCL scripting language that allows interactive sessions without user intervention."
 msgstr "pengguna."
 
 #: standalone/drakbackup:157
@@ -15879,93 +16236,62 @@ msgstr "dalam."
 
 #: standalone/drakbackup:158
 #, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
+msgid "For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup."
 msgstr ""
 
 #: standalone/drakbackup:159
 #, fuzzy, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
+msgid "This option will save files that have changed.  Exact behavior depends on whether incremental or differential mode is used."
 msgstr "fail on."
 
 #: standalone/drakbackup:160
 #, fuzzy, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"Backup berkala hanya menyimpan fail yang telah berubah atau baru semenjak "
-"backup 'induk' asal"
+msgid "Incremental backups only save files that have changed or are new since the last backup."
+msgstr "Backup berkala hanya menyimpan fail yang telah berubah atau baru semenjak backup 'induk' asal"
 
 #: standalone/drakbackup:161
 #, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Backup berkala hanya menyimpan fail yang telah berubah atau baru semenjak "
-"backup 'induk' asal"
+msgid "Differential backups only save files that have changed or are new since the original 'base' backup."
+msgstr "Backup berkala hanya menyimpan fail yang telah berubah atau baru semenjak backup 'induk' asal"
 
 #: standalone/drakbackup:162
 #, c-format
-msgid ""
-"Star should be selected if you want to backup EA or ACLs, otherwise choose "
-"tar"
+msgid "Star should be selected if you want to backup EA or ACLs, otherwise choose tar"
 msgstr ""
 
 #: standalone/drakbackup:163
 #, fuzzy, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server. Multiple "
-"users can be in a comma seperated list"
+msgid "This should be a local user or email address that you want the backup results sent to. You will need to define a functioning mail server. Multiple users can be in a comma seperated list"
 msgstr "lokal on."
 
 #: standalone/drakbackup:164
 #, fuzzy, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbackup."
+msgid "This should be the return address that you want the backup results sent from. Default is drakbackup."
 msgstr "lokal on."
 
 #: standalone/drakbackup:165
 #, fuzzy, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
+msgid "Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up."
 msgstr "dalam fail direktori."
 
 #: standalone/drakbackup:166
 #, fuzzy, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
+msgid "For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup."
 msgstr "fail on fail."
 
 #: standalone/drakbackup:167
 #, c-format
-msgid ""
-"Selecting this option allows you to view the raw output from the restore "
-"process, after a file restore."
+msgid "Selecting this option allows you to view the raw output from the restore process, after a file restore."
 msgstr ""
 
 #: standalone/drakbackup:168
 #, fuzzy, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
+msgid "Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path."
 msgstr "protokol direktori."
 
 #: standalone/drakbackup:169
 #, fuzzy, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
+msgid "Custom allows you to specify your own day and time.  The other options use run-parts in /etc/crontab."
 msgstr "Tersendiri dan dalam."
 
 #: standalone/drakbackup:343
@@ -15983,16 +16309,16 @@ msgstr ""
 msgid "Interval cron not available as non-root"
 msgstr ""
 
-#: standalone/drakbackup:477 standalone/logdrake:440
+#: standalone/drakbackup:477
+#: standalone/logdrake:440
 #, c-format
 msgid "\"%s\" neither is a valid email nor is an existing local user!"
 msgstr ""
 
-#: standalone/drakbackup:481 standalone/logdrake:445
+#: standalone/drakbackup:481
+#: standalone/logdrake:445
 #, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
+msgid "\"%s\" is a local user, but you did not select a local smtp, so you must use a complete email address!"
 msgstr ""
 
 #: standalone/drakbackup:491
@@ -16033,7 +16359,8 @@ msgid ""
 "\n"
 msgstr "Perincian Kumpulan Pakej"
 
-#: standalone/drakbackup:556 standalone/drakbackup:627
+#: standalone/drakbackup:556
+#: standalone/drakbackup:627
 #: standalone/drakbackup:683
 #, fuzzy, c-format
 msgid "Total progress"
@@ -16133,12 +16460,14 @@ msgid ""
 "%d MB used vs %d MB allocated."
 msgstr ""
 
-#: standalone/drakbackup:968 standalone/drakbackup:1000
+#: standalone/drakbackup:968
+#: standalone/drakbackup:1000
 #, fuzzy, c-format
 msgid "Backup system files..."
 msgstr "Memeriksa fail log sistem"
 
-#: standalone/drakbackup:1001 standalone/drakbackup:1040
+#: standalone/drakbackup:1001
+#: standalone/drakbackup:1040
 #, fuzzy, c-format
 msgid "Hard Disk Backup files..."
 msgstr "Salin fail sediawujud ketika menyimpan"
@@ -16163,7 +16492,8 @@ msgstr ""
 msgid "No changes to backup!"
 msgstr "Tiada route ke hos"
 
-#: standalone/drakbackup:1095 standalone/drakbackup:1117
+#: standalone/drakbackup:1095
+#: standalone/drakbackup:1117
 #, fuzzy, c-format
 msgid ""
 "\n"
@@ -16175,16 +16505,14 @@ msgstr "_automatik dengan DHCP"
 #, fuzzy, c-format
 msgid ""
 "\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+" FTP connection problem: It was not possible to send your backup files by FTP.\n"
 msgstr ""
 "\n"
 " FTP fail FTP"
 
 #: standalone/drakbackup:1105
 #, fuzzy, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
+msgid "Error during sending file via FTP. Please correct your FTP configuration."
 msgstr ""
 "Ralat fail FTP\n"
 " FTP."
@@ -16237,19 +16565,22 @@ msgstr "Memasang PemuatBoot..."
 msgid "Backup your System files. (/etc directory)"
 msgstr "Sistem fail direktori"
 
-#: standalone/drakbackup:1410 standalone/drakbackup:1473
+#: standalone/drakbackup:1410
+#: standalone/drakbackup:1473
 #: standalone/drakbackup:1539
 #, c-format
 msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr ""
 
-#: standalone/drakbackup:1412 standalone/drakbackup:1475
+#: standalone/drakbackup:1412
+#: standalone/drakbackup:1475
 #: standalone/drakbackup:1541
 #, fuzzy, c-format
 msgid "Use Incremental Backups"
 msgstr "jangan buat salinan"
 
-#: standalone/drakbackup:1412 standalone/drakbackup:1475
+#: standalone/drakbackup:1412
+#: standalone/drakbackup:1475
 #: standalone/drakbackup:1541
 #, fuzzy, c-format
 msgid "Use Differential Backups"
@@ -16275,7 +16606,8 @@ msgstr "Jangan guna cache luartalian"
 msgid "Select the files or directories and click on 'OK'"
 msgstr "fail dan on OK"
 
-#: standalone/drakbackup:1527 standalone/drakfont:658
+#: standalone/drakbackup:1527
+#: standalone/drakfont:658
 #, fuzzy, c-format
 msgid "Remove Selected"
 msgstr "Padam direktori dipilih"
@@ -16460,31 +16792,36 @@ msgstr "CD-R / DVD-R"
 msgid "HardDrive / NFS"
 msgstr "Imej NFS"
 
-#: standalone/drakbackup:2065 standalone/drakbackup:2066
+#: standalone/drakbackup:2065
+#: standalone/drakbackup:2066
 #: standalone/drakbackup:2071
 #, c-format
 msgid "hourly"
 msgstr ""
 
-#: standalone/drakbackup:2065 standalone/drakbackup:2067
+#: standalone/drakbackup:2065
+#: standalone/drakbackup:2067
 #: standalone/drakbackup:2072
 #, c-format
 msgid "daily"
 msgstr ""
 
-#: standalone/drakbackup:2065 standalone/drakbackup:2068
+#: standalone/drakbackup:2065
+#: standalone/drakbackup:2068
 #: standalone/drakbackup:2073
 #, c-format
 msgid "weekly"
 msgstr ""
 
-#: standalone/drakbackup:2065 standalone/drakbackup:2069
+#: standalone/drakbackup:2065
+#: standalone/drakbackup:2069
 #: standalone/drakbackup:2074
 #, c-format
 msgid "monthly"
 msgstr ""
 
-#: standalone/drakbackup:2065 standalone/drakbackup:2070
+#: standalone/drakbackup:2065
+#: standalone/drakbackup:2070
 #: standalone/drakbackup:2075
 #, c-format
 msgid "custom"
@@ -16658,8 +16995,7 @@ msgstr "dalam."
 
 #: standalone/drakbackup:2229
 #, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
+msgid "If your machine is not on all the time, you might want to install anacron."
 msgstr ""
 
 #: standalone/drakbackup:2293
@@ -16727,7 +17063,8 @@ msgstr "Pilihan Lain"
 msgid "Backup destination not configured..."
 msgstr "Firewall tidak dikonfigurasikan."
 
-#: standalone/drakbackup:2414 standalone/drakbackup:4339
+#: standalone/drakbackup:2414
+#: standalone/drakbackup:4339
 #, fuzzy, c-format
 msgid "Drakbackup Configuration"
 msgstr "Status konfigurasi bagi %s %s\n"
@@ -16993,7 +17330,8 @@ msgstr "tak dapat memulihkan keizinan %s"
 msgid "- Restore System Files.\n"
 msgstr "Memeriksa fail log sistem"
 
-#: standalone/drakbackup:2654 standalone/drakbackup:2664
+#: standalone/drakbackup:2654
+#: standalone/drakbackup:2664
 #, fuzzy, c-format
 msgid "   - from date: %s %s\n"
 msgstr "tarikh tak sah `%s'"
@@ -17105,7 +17443,8 @@ msgstr "Port lain"
 msgid "Select path to restore (instead of /)"
 msgstr ""
 
-#: standalone/drakbackup:3233 standalone/drakbackup:3514
+#: standalone/drakbackup:3233
+#: standalone/drakbackup:3514
 #, fuzzy, c-format
 msgid "Path To Restore To"
 msgstr "Laluan ke EGD:"
@@ -17259,7 +17598,8 @@ msgstr "[%s (%s): gagal.  Diabaikan]\n"
 msgid "%s not retrieved..."
 msgstr "\"%s\" tidak dijumpai"
 
-#: standalone/drakbackup:3901 standalone/drakbackup:3970
+#: standalone/drakbackup:3901
+#: standalone/drakbackup:3970
 #, fuzzy, c-format
 msgid "Search for files to restore"
 msgstr "Nama halaman untuk dicari:"
@@ -17274,7 +17614,8 @@ msgstr "jangan buat salinan"
 msgid "Custom Restore"
 msgstr "Pili&h Semua"
 
-#: standalone/drakbackup:3917 standalone/drakbackup:3966
+#: standalone/drakbackup:3917
+#: standalone/drakbackup:3966
 #, fuzzy, c-format
 msgid "Restore From Catalog"
 msgstr "KBabel - Pengurus Katalog"
@@ -17324,7 +17665,8 @@ msgstr "Sedang dilaksanakan...   "
 msgid "Build Backup"
 msgstr "Fail Salinan"
 
-#: standalone/drakbackup:4141 standalone/drakbackup:4438
+#: standalone/drakbackup:4141
+#: standalone/drakbackup:4438
 #, c-format
 msgid "Restore"
 msgstr "Pulih"
@@ -17349,7 +17691,8 @@ msgstr "Fail dimiliki oleh pengg&una:"
 msgid "Backup other files"
 msgstr "Fail Prebiu Lain-lain"
 
-#: standalone/drakbackup:4282 standalone/drakbackup:4316
+#: standalone/drakbackup:4282
+#: standalone/drakbackup:4316
 #, c-format
 msgid "Total Progress"
 msgstr "Jumlah Kemajuan"
@@ -17416,7 +17759,8 @@ msgstr "Muatkan Lihat P&rofil"
 msgid "Save profile as..."
 msgstr "/Fail/Simpan Seb_agai..."
 
-#: standalone/drakbackup:4504 standalone/drakbackup:4507
+#: standalone/drakbackup:4504
+#: standalone/drakbackup:4507
 #, c-format
 msgid "Drakbackup"
 msgstr "Drakbackup"
@@ -17426,20 +17770,27 @@ msgstr "Drakbackup"
 msgid "No bootloader found, creating a new configuration"
 msgstr ""
 
-#: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191
-#: standalone/harddrake2:192 standalone/logdrake:69
-#: standalone/printerdrake:150 standalone/printerdrake:151
+#: standalone/drakboot:84
+#: standalone/harddrake2:190
+#: standalone/harddrake2:191
+#: standalone/harddrake2:192
+#: standalone/logdrake:69
+#: standalone/printerdrake:150
+#: standalone/printerdrake:151
 #: standalone/printerdrake:152
 #, c-format
 msgid "/_File"
 msgstr "/_Fail"
 
-#: standalone/drakboot:85 standalone/logdrake:75
+#: standalone/drakboot:85
+#: standalone/logdrake:75
 #, c-format
 msgid "/File/_Quit"
 msgstr "/Fail/_Keluar"
 
-#: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75
+#: standalone/drakboot:85
+#: standalone/harddrake2:192
+#: standalone/logdrake:75
 #: standalone/printerdrake:152
 #, c-format
 msgid "<control>Q"
@@ -17462,9 +17813,7 @@ msgstr " -s, --silent     Berkerja dengan senyap."
 
 #: standalone/drakboot:134
 #, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
+msgid "Your system bootloader is not in framebuffer mode. To activate graphical boot, select a graphic video mode from the bootloader configuration tool."
 msgstr ""
 
 #: standalone/drakboot:135
@@ -17537,8 +17886,7 @@ msgstr ""
 #: standalone/drakboot:272
 #, c-format
 msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
+"Please choose a video mode, it will be applied to each of the boot entries selected below.\n"
 "Be sure your video card supports the mode you choose."
 msgstr ""
 
@@ -17557,7 +17905,8 @@ msgstr "Pusat Kawalan Mandriva Linux"
 msgid "Synchronization tool"
 msgstr "Laksana Alat"
 
-#: standalone/drakbug:49 standalone/drakbug:152
+#: standalone/drakbug:49
+#: standalone/drakbug:152
 #, fuzzy, c-format
 msgid "Standalone Tools"
 msgstr "Alatan Pentadbiran"
@@ -17602,7 +17951,8 @@ msgstr "Urpmi"
 msgid "Windows Migration tool"
 msgstr "Alatan Penukar Desktop"
 
-#: standalone/drakbug:58 standalone/draksambashare:1236
+#: standalone/drakbug:58
+#: standalone/draksambashare:1236
 #, c-format
 msgid "Userdrake"
 msgstr "Userdrake"
@@ -17643,10 +17993,8 @@ msgstr "Kernel:"
 #, c-format
 msgid ""
 "To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
+"This will open a web browser window on %s where you'll find a form to fill in.  The information displayed above will be transferred to that server.  \n"
+"Things useful to include in your report are the output of lspci, kernel version, and /proc/cpuinfo."
 msgstr ""
 
 #: standalone/drakbug:107
@@ -17704,9 +18052,7 @@ msgstr "_HIdupkan Protokol Masa Rangkaian"
 msgid ""
 "Your computer can synchronize its clock\n"
 " with a remote time server using NTP"
-msgstr ""
-"Komputer anda boleh mensegerak jamnya dengan pelayan masa jauh menggunakan "
-"Protokol Masa Rangkaian"
+msgstr "Komputer anda boleh mensegerak jamnya dengan pelayan masa jauh menggunakan Protokol Masa Rangkaian"
 
 #: standalone/drakclock:78
 #, fuzzy, c-format
@@ -17723,7 +18069,8 @@ msgstr "Pelayan:"
 msgid "Could not synchronize with %s."
 msgstr "Tidak dapat didaftar dengan DCOP.\n"
 
-#: standalone/drakclock:146 standalone/drakclock:156
+#: standalone/drakclock:146
+#: standalone/drakclock:156
 #, c-format
 msgid "Reset"
 msgstr "Ulangtetap"
@@ -17742,17 +18089,20 @@ msgstr ""
 msgid "Network configuration (%d adapters)"
 msgstr "Konfigurasi Rangkaian bagi %s"
 
-#: standalone/drakconnect:89 standalone/drakconnect:807
+#: standalone/drakconnect:89
+#: standalone/drakconnect:807
 #, c-format
 msgid "Gateway:"
 msgstr "Gateway :"
 
-#: standalone/drakconnect:89 standalone/drakconnect:807
+#: standalone/drakconnect:89
+#: standalone/drakconnect:807
 #, c-format
 msgid "Interface:"
 msgstr "Antaramuka:"
 
-#: standalone/drakconnect:93 standalone/net_monitor:116
+#: standalone/drakconnect:93
+#: standalone/net_monitor:116
 #, fuzzy, c-format
 msgid "Wait please"
 msgstr "Sila Tunggu"
@@ -17762,7 +18112,8 @@ msgstr "Sila Tunggu"
 msgid "Interface"
 msgstr "Antaramuka"
 
-#: standalone/drakconnect:109 standalone/printerdrake:224
+#: standalone/drakconnect:109
+#: standalone/printerdrake:224
 #: standalone/printerdrake:231
 #, c-format
 msgid "State"
@@ -17778,7 +18129,8 @@ msgstr "Nama hos: "
 msgid "Configure hostname..."
 msgstr "Tetapkan namahos:"
 
-#: standalone/drakconnect:142 standalone/drakconnect:845
+#: standalone/drakconnect:142
+#: standalone/drakconnect:845
 #, fuzzy, c-format
 msgid "LAN configuration"
 msgstr "Status konfigurasi bagi %s %s\n"
@@ -17788,7 +18140,8 @@ msgstr "Status konfigurasi bagi %s %s\n"
 msgid "Configure Local Area Network..."
 msgstr "Name=Borak Jaringan Setempat"
 
-#: standalone/drakconnect:155 standalone/drakconnect:237
+#: standalone/drakconnect:155
+#: standalone/drakconnect:237
 #: standalone/drakconnect:241
 #, c-format
 msgid "Apply"
@@ -17864,17 +18217,20 @@ msgstr "Sila Tunggu"
 msgid "Modem sound"
 msgstr "Fail bunyi: "
 
-#: standalone/drakconnect:542 standalone/drakgw:105
+#: standalone/drakconnect:542
+#: standalone/drakgw:105
 #, c-format
 msgid "Enable"
 msgstr "Hidupkan"
 
-#: standalone/drakconnect:542 standalone/drakgw:105
+#: standalone/drakconnect:542
+#: standalone/drakgw:105
 #, c-format
 msgid "Disable"
 msgstr "Lumpuh"
 
-#: standalone/drakconnect:593 standalone/harddrake2:50
+#: standalone/drakconnect:593
+#: standalone/harddrake2:50
 #, fuzzy, c-format
 msgid "Media class"
 msgstr "Kelas Keselamatan"
@@ -17889,22 +18245,23 @@ msgstr "Name=Modul Kawalan KDE"
 msgid "Mac Address"
 msgstr "Alamat MAC"
 
-#: standalone/drakconnect:596 standalone/harddrake2:28
+#: standalone/drakconnect:596
+#: standalone/harddrake2:28
 #: standalone/harddrake2:120
 #, fuzzy, c-format
 msgid "Bus"
 msgstr "Kursor S&ibuk"
 
-#: standalone/drakconnect:597 standalone/harddrake2:34
+#: standalone/drakconnect:597
+#: standalone/harddrake2:34
 #, fuzzy, c-format
 msgid "Location on the bus"
 msgstr "[%s (%s): 1 halaman pada 1 helaian]\n"
 
-#: standalone/drakconnect:700 standalone/drakgw:311
+#: standalone/drakconnect:700
+#: standalone/drakgw:311
 #, fuzzy, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+msgid "No ethernet network adapter has been detected on your system. Please run the hardware configuration tool."
 msgstr "Tidak on."
 
 #: standalone/drakconnect:708
@@ -17927,8 +18284,7 @@ msgstr "A"
 
 #: standalone/drakconnect:745
 #, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
+msgid "Congratulations, the \"%s\" network interface has been successfully deleted"
 msgstr ""
 
 #: standalone/drakconnect:761
@@ -17941,22 +18297,26 @@ msgstr "Alamat IP"
 msgid "No Mask"
 msgstr "Net_mask"
 
-#: standalone/drakconnect:763 standalone/drakconnect:916
+#: standalone/drakconnect:763
+#: standalone/drakconnect:916
 #, fuzzy, c-format
 msgid "up"
 msgstr "Naik"
 
-#: standalone/drakconnect:763 standalone/drakconnect:916
+#: standalone/drakconnect:763
+#: standalone/drakconnect:916
 #, fuzzy, c-format
 msgid "down"
 msgstr "Turun"
 
-#: standalone/drakconnect:798 standalone/net_monitor:465
+#: standalone/drakconnect:798
+#: standalone/net_monitor:465
 #, c-format
 msgid "Connected"
 msgstr "Tersambung"
 
-#: standalone/drakconnect:798 standalone/net_monitor:465
+#: standalone/drakconnect:798
+#: standalone/net_monitor:465
 #, c-format
 msgid "Not connected"
 msgstr "Tidak disambung"
@@ -18015,7 +18375,8 @@ msgid ""
 "Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
 msgstr "dalam utama"
 
-#: standalone/drakconnect:975 standalone/net_applet:51
+#: standalone/drakconnect:975
+#: standalone/net_applet:51
 #, fuzzy, c-format
 msgid ""
 "You do not have any configured Internet connection.\n"
@@ -18023,7 +18384,9 @@ msgid ""
 msgstr "dalam utama"
 
 #. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52
+#: standalone/drakconnect:976
+#: standalone/drakroam:34
+#: standalone/net_applet:52
 #, fuzzy, c-format
 msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
 msgstr "Name=Network Interface"
@@ -18036,7 +18399,7 @@ msgstr "Jurucipta Konfigurasi Internet"
 #: standalone/drakconnect:994
 #, fuzzy, c-format
 msgid "Third DNS server (optional)"
-msgstr "Alamat IP pelayan DNS induk:"
+msgstr "Masukkan Nama Pelayan DNS"
 
 #: standalone/drakconnect:1016
 #, fuzzy, c-format
@@ -18048,7 +18411,8 @@ msgstr "Jurucipta Konfigurasi Internet"
 msgid "Internet access"
 msgstr "Akses Internet"
 
-#: standalone/drakconnect:1019 standalone/net_monitor:95
+#: standalone/drakconnect:1019
+#: standalone/net_monitor:95
 #, fuzzy, c-format
 msgid "Connection type: "
 msgstr "Jenis perhubungan tidak diketahui"
@@ -18098,9 +18462,7 @@ msgstr "siap ulanghidup?"
 
 #: standalone/drakedm:73
 #, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
+msgid "You are going to close all running programs and lose your current session. Are you really sure that you want to restart the dm service?"
 msgstr ""
 
 #: standalone/drakfont:183
@@ -18123,9 +18485,14 @@ msgstr "Selaraskan Se&mua Font..."
 msgid "No fonts found"
 msgstr "Tiada Pemacu Dijumpai"
 
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
+#: standalone/drakfont:218
+#: standalone/drakfont:260
+#: standalone/drakfont:327
+#: standalone/drakfont:360
+#: standalone/drakfont:368
+#: standalone/drakfont:394
+#: standalone/drakfont:412
+#: standalone/drakfont:426
 #, fuzzy, c-format
 msgid "done"
 msgstr ", selesai\n"
@@ -18175,7 +18542,8 @@ msgstr "Memuatkan Tetapan... Sila tunggu"
 msgid "True Type install done"
 msgstr "Jenis"
 
-#: standalone/drakfont:342 standalone/drakfont:357
+#: standalone/drakfont:342
+#: standalone/drakfont:357
 #, fuzzy, c-format
 msgid "type1inst building"
 msgstr "bangun hdlist [%s]"
@@ -18195,7 +18563,8 @@ msgstr "Fail %s dan %s berbeza\n"
 msgid "Restart XFS"
 msgstr "_Ulanghidup Servis"
 
-#: standalone/drakfont:410 standalone/drakfont:420
+#: standalone/drakfont:410
+#: standalone/drakfont:420
 #, fuzzy, c-format
 msgid "Suppress Fonts Files"
 msgstr "Fail %s dan %s berbeza\n"
@@ -18208,14 +18577,13 @@ msgstr "_Ulanghidup Servis"
 #: standalone/drakfont:430
 #, fuzzy, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Before installing any fonts, be sure that you have the right to use and install them on your system.\n"
 "\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server."
 msgstr "dan on normal Masuk Pelayan."
 
-#: standalone/drakfont:474 standalone/drakfont:483
+#: standalone/drakfont:474
+#: standalone/drakfont:483
 #, c-format
 msgid "DrakFont"
 msgstr "DrakFont"
@@ -18235,7 +18603,9 @@ msgstr "Font Bitstream Vera"
 msgid "About"
 msgstr "Perihal"
 
-#: standalone/drakfont:495 standalone/drakfont:689 standalone/drakfont:727
+#: standalone/drakfont:495
+#: standalone/drakfont:689
+#: standalone/drakfont:727
 #, c-format
 msgid "Uninstall"
 msgstr "Nyah pasang"
@@ -18372,12 +18742,14 @@ msgstr "Nyah-pilih semua item"
 msgid "Remove List"
 msgstr "Buang Senarai"
 
-#: standalone/drakfont:752 standalone/drakfont:771
+#: standalone/drakfont:752
+#: standalone/drakfont:771
 #, fuzzy, c-format
 msgid "Importing fonts"
 msgstr "Font Diketahui"
 
-#: standalone/drakfont:756 standalone/drakfont:776
+#: standalone/drakfont:756
+#: standalone/drakfont:776
 #, fuzzy, c-format
 msgid "Initial tests"
 msgstr "Pengarang awalan"
@@ -18407,7 +18779,8 @@ msgstr "Menetapkan pelayan PXE pada sistem anda..."
 msgid "Post Uninstall"
 msgstr "Nyah-pasan&g yang Ditanda"
 
-#: standalone/drakgw:50 standalone/drakvpn:51
+#: standalone/drakgw:50
+#: standalone/drakvpn:51
 #, c-format
 msgid "Sorry, we support only 2.4 and above kernels."
 msgstr ""
@@ -18421,14 +18794,11 @@ msgstr "Perkongsian sambungan Internet"
 #, fuzzy, c-format
 msgid ""
 "You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
+"With that feature, other computers on your local network will be able to use this computer's Internet connection.\n"
 "\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Make sure you have configured your Network/Internet access using drakconnect before going any further.\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."
 msgstr "Internet on lokal Internet Rangkaian Internet Rangkaian Rangkaian."
 
 #: standalone/drakgw:95
@@ -18466,9 +18836,7 @@ msgstr "on am Rangkaian."
 
 #: standalone/drakgw:156
 #, fuzzy, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+msgid "Please choose what network adapter will be connected to your Local Area Network."
 msgstr "Rangkaian."
 
 #: standalone/drakgw:177
@@ -18591,8 +18959,7 @@ msgstr "Internet dimatikan."
 #, fuzzy, c-format
 msgid ""
 "Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
+"You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP) and\n"
 " a Transparent Proxy Cache server (SQUID)."
 msgstr "Semuanya Internet on Rangkaian DHCP."
 
@@ -18608,9 +18975,7 @@ msgstr "Jenis tetikus dikesan: %s"
 
 #: standalone/drakgw:379
 #, fuzzy, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation."
 msgstr "Amaran."
 
 #: standalone/drakgw:384
@@ -18628,8 +18993,7 @@ msgstr "_Konfigurasikan Firewall"
 msgid ""
 " drakhelp 0.1\n"
 "Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
+"This is free software and may be redistributed under the terms of the GNU GPL.\n"
 "\n"
 "Usage: \n"
 msgstr ""
@@ -18646,15 +19010,12 @@ msgstr " --help                - paparkan bantuan ini\n"
 
 #: standalone/drakhelp:23
 #, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
+msgid " --id <id_label>       - load the html help page which refers to id_label\n"
 msgstr ""
 
 #: standalone/drakhelp:24
 #, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
+msgid " --doc <link>          - link to another web page ( for WM welcome frontend)\n"
 msgstr ""
 
 #: standalone/drakhelp:51
@@ -18752,12 +19113,16 @@ msgstr "Log"
 msgid "Clear logs"
 msgstr "Log Sistem"
 
-#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:470
+#: standalone/drakids:62
+#: standalone/drakids:67
+#: standalone/net_applet:470
 #, c-format
 msgid "Blacklist"
 msgstr ""
 
-#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:475
+#: standalone/drakids:63
+#: standalone/drakids:80
+#: standalone/net_applet:475
 #, c-format
 msgid "Whitelist"
 msgstr ""
@@ -18777,9 +19142,15 @@ msgstr "tak dapat pindahkan %s ke %s"
 msgid "Remove from whitelist"
 msgstr "Buang Daripada Panel"
 
-#: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170
-#: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265
-#: standalone/drakroam:182 standalone/net_applet:202 standalone/net_applet:385
+#: standalone/drakids:136
+#: standalone/drakids:145
+#: standalone/drakids:170
+#: standalone/drakids:179
+#: standalone/drakids:189
+#: standalone/drakids:265
+#: standalone/drakroam:182
+#: standalone/net_applet:202
+#: standalone/net_applet:385
 #, fuzzy, c-format
 msgid "Unable to contact daemon"
 msgstr "Gagal hubungi KDED!"
@@ -18804,7 +19175,8 @@ msgstr "apa-apa jenis"
 msgid "Service"
 msgstr "Servis"
 
-#: standalone/drakids:206 standalone/net_applet:72
+#: standalone/drakids:206
+#: standalone/net_applet:72
 #, fuzzy, c-format
 msgid "Network interface"
 msgstr "Antaramuka rangkaian"
@@ -18844,12 +19216,14 @@ msgstr "Sila masukkan pelayan NFS."
 msgid "Error Restarting/Reloading NFS server"
 msgstr ""
 
-#: standalone/draknfs:100 standalone/draksambashare:203
+#: standalone/draknfs:100
+#: standalone/draksambashare:203
 #, fuzzy, c-format
 msgid "Directory Selection"
 msgstr "Pilihan Bahasa"
 
-#: standalone/draknfs:105 standalone/draksambashare:208
+#: standalone/draknfs:105
+#: standalone/draksambashare:208
 #, fuzzy, c-format
 msgid "Should be a directory."
 msgstr "Sepatutnya adalah direktori."
@@ -18857,28 +19231,19 @@ msgstr "Sepatutnya adalah direktori."
 #: standalone/draknfs:136
 #, c-format
 msgid ""
-"<span weight=\"bold\">NFS clients</span> may be specified in a number of "
-"ways:\n"
+"<span weight=\"bold\">NFS clients</span> may be specified in a number of ways:\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">single host:</span> a host either by an "
-"abbreviated name recognized be the resolver, fully qualified domain name, or "
-"an IP address\n"
+"<span foreground=\"royalblue3\">single host:</span> a host either by an abbreviated name recognized be the resolver, fully qualified domain name, or an IP address\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given "
-"as @group.\n"
+"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given as @group.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain "
-"the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  "
-"hosts  in the domain cs.foo.edu.\n"
+"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  hosts  in the domain cs.foo.edu.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">IP networks:</span> you can also export "
-"directories to all hosts on an IP (sub-)network simultaneously. for example, "
-"either `/255.255.252.0' or  `/22'  appended to the network base address "
-"result.\n"
+"<span foreground=\"royalblue3\">IP networks:</span> you can also export directories to all hosts on an IP (sub-)network simultaneously. for example, either `/255.255.252.0' or  `/22'  appended to the network base address result.\n"
 msgstr ""
 
 #: standalone/draknfs:151
@@ -18887,24 +19252,16 @@ msgid ""
 "<span weight=\"bold\">User ID options</span>\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">map root user as anonymous:</span> map "
-"requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
+"<span foreground=\"royalblue3\">map root user as anonymous:</span> map requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">allow real remote root access:</span> turn "
-"off root squashing. This option is mainly useful for diskless clients "
-"(no_root_squash).\n"
+"<span foreground=\"royalblue3\">allow real remote root access:</span> turn off root squashing. This option is mainly useful for diskless clients (no_root_squash).\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map "
-"all uids and gids to the anonymous  user (all_squash). Useful for NFS-"
-"exported public FTP directories, news spool directories, etc. The opposite "
-"option is no user UID mapping (no_all_squash), which is the default "
-"setting.\n"
+"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map all uids and gids to the anonymous  user (all_squash). Useful for NFS-exported public FTP directories, news spool directories, etc. The opposite option is no user UID mapping (no_all_squash), which is the default setting.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set "
-"the uid and gid of the anonymous account.\n"
+"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set the uid and gid of the anonymous account.\n"
 msgstr ""
 
 #: standalone/draknfs:167
@@ -18929,27 +19286,17 @@ msgstr ""
 
 #: standalone/draknfs:172
 #, c-format
-msgid ""
-"<span foreground=\"royalblue3\">%s:</span> this option requires that "
-"requests originate on an internet port less than IPPORT_RESERVED (1024). "
-"This option is on by default."
+msgid "<span foreground=\"royalblue3\">%s:</span> this option requires that requests originate on an internet port less than IPPORT_RESERVED (1024). This option is on by default."
 msgstr ""
 
 #: standalone/draknfs:173
 #, c-format
-msgid ""
-"<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
-"read and write requests on this NFS volume. The default is to disallow any "
-"request which changes the filesystem. This can also be made explicit by "
-"using this option."
+msgid "<span foreground=\"royalblue3\">%s:</span> allow either only read or both read and write requests on this NFS volume. The default is to disallow any request which changes the filesystem. This can also be made explicit by using this option."
 msgstr ""
 
 #: standalone/draknfs:174
 #, c-format
-msgid ""
-"<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
-"violate the NFS protocol and to reply to requests before any changes made by "
-"these requests have been committed to stable storage (e.g. disc drive)."
+msgid "<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to violate the NFS protocol and to reply to requests before any changes made by these requests have been committed to stable storage (e.g. disc drive)."
 msgstr ""
 
 #: standalone/draknfs:306
@@ -18967,7 +19314,8 @@ msgstr "_Papar pilihan lanjut"
 msgid "NFS directory"
 msgstr "Direktori NFS:"
 
-#: standalone/draknfs:391 standalone/draksambashare:594
+#: standalone/draknfs:391
+#: standalone/draksambashare:594
 #: standalone/draksambashare:773
 #, c-format
 msgid "Directory:"
@@ -19043,7 +19391,8 @@ msgstr "Pilihan Umum"
 msgid "Custom Options"
 msgstr "Pilihan custom"
 
-#: standalone/draknfs:539 standalone/draksambashare:631
+#: standalone/draknfs:539
+#: standalone/draksambashare:631
 #: standalone/draksambashare:798
 #, fuzzy, c-format
 msgid "Please enter a directory to share."
@@ -19094,23 +19443,27 @@ msgstr "Lebih Tetapan Sistem"
 msgid "Editable"
 msgstr "Bolehedit"
 
-#: standalone/drakperm:48 standalone/drakperm:323
+#: standalone/drakperm:48
+#: standalone/drakperm:323
 #: standalone/draksambashare:101
 #, c-format
 msgid "Path"
 msgstr "Laluan"
 
-#: standalone/drakperm:48 standalone/drakperm:250
+#: standalone/drakperm:48
+#: standalone/drakperm:250
 #, c-format
 msgid "User"
 msgstr "Pengguna"
 
-#: standalone/drakperm:48 standalone/drakperm:250
+#: standalone/drakperm:48
+#: standalone/drakperm:250
 #, c-format
 msgid "Group"
 msgstr "Kumpulan"
 
-#: standalone/drakperm:48 standalone/drakperm:335
+#: standalone/drakperm:48
+#: standalone/drakperm:335
 #, c-format
 msgid "Permissions"
 msgstr "Keizinan"
@@ -19120,7 +19473,9 @@ msgstr "Keizinan"
 msgid "Add a new rule"
 msgstr "_Tambah pelayan baru"
 
-#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
+#: standalone/drakperm:64
+#: standalone/drakperm:99
+#: standalone/drakperm:124
 #, fuzzy, c-format
 msgid "Edit current rule"
 msgstr "Ubah hubungan semasa"
@@ -19128,8 +19483,7 @@ msgstr "Ubah hubungan semasa"
 #: standalone/drakperm:106
 #, fuzzy, c-format
 msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
+"Here you can see files to use in order to fix permissions, owners, and groups via msec.\n"
 "You can also edit your own rules which will owerwrite the default rules."
 msgstr "fail dalam dan default."
 
@@ -19262,7 +19616,8 @@ msgstr "Gid berbeza"
 msgid "Use group id for execution"
 msgstr "id pengguna/kumpulan sedang digunakan"
 
-#: standalone/drakperm:292 standalone/drakxtv:89
+#: standalone/drakperm:292
+#: standalone/drakxtv:89
 #, c-format
 msgid "User:"
 msgstr "Pengguna:"
@@ -19354,7 +19709,8 @@ msgid "Connect"
 msgstr "Sambung"
 
 #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:229 standalone/printerdrake:251
+#: standalone/drakroam:229
+#: standalone/printerdrake:251
 #, c-format
 msgid "Refresh"
 msgstr "Segarkan"
@@ -19364,12 +19720,14 @@ msgstr "Segarkan"
 msgid "Share directory"
 msgstr "\"%s\" adalah sebuah direktori"
 
-#: standalone/draksambashare:69 standalone/draksambashare:102
+#: standalone/draksambashare:69
+#: standalone/draksambashare:102
 #, c-format
 msgid "Comment"
 msgstr "Komen"
 
-#: standalone/draksambashare:70 standalone/draksambashare:103
+#: standalone/draksambashare:70
+#: standalone/draksambashare:103
 #, fuzzy, c-format
 msgid "Browseable"
 msgstr "Lungsur"
@@ -19379,17 +19737,20 @@ msgstr "Lungsur"
 msgid "Public"
 msgstr "Awam"
 
-#: standalone/draksambashare:72 standalone/draksambashare:108
+#: standalone/draksambashare:72
+#: standalone/draksambashare:108
 #, fuzzy, c-format
 msgid "Writable"
 msgstr "_Boleh Tulis"
 
-#: standalone/draksambashare:73 standalone/draksambashare:149
+#: standalone/draksambashare:73
+#: standalone/draksambashare:149
 #, fuzzy, c-format
 msgid "Create mask"
 msgstr "Net_mask"
 
-#: standalone/draksambashare:74 standalone/draksambashare:150
+#: standalone/draksambashare:74
+#: standalone/draksambashare:150
 #, fuzzy, c-format
 msgid "Directory mask"
 msgstr "Net_mask"
@@ -19399,18 +19760,21 @@ msgstr "Net_mask"
 msgid "Read list"
 msgstr "Segarkan senarai"
 
-#: standalone/draksambashare:76 standalone/draksambashare:109
+#: standalone/draksambashare:76
+#: standalone/draksambashare:109
 #: standalone/draksambashare:608
 #, fuzzy, c-format
 msgid "Write list"
 msgstr "Segarkan senarai"
 
-#: standalone/draksambashare:77 standalone/draksambashare:141
+#: standalone/draksambashare:77
+#: standalone/draksambashare:141
 #, fuzzy, c-format
 msgid "Admin users"
 msgstr "Pengg_una Samba..."
 
-#: standalone/draksambashare:78 standalone/draksambashare:142
+#: standalone/draksambashare:78
+#: standalone/draksambashare:142
 #, fuzzy, c-format
 msgid "Valid users"
 msgstr "Pengg_una Samba..."
@@ -19420,12 +19784,14 @@ msgstr "Pengg_una Samba..."
 msgid "Inherit Permissions"
 msgstr "menukar keizinan %s"
 
-#: standalone/draksambashare:80 standalone/draksambashare:143
+#: standalone/draksambashare:80
+#: standalone/draksambashare:143
 #, fuzzy, c-format
 msgid "Hide dot files"
 msgstr "Togol pemaparan fail tersorok dot"
 
-#: standalone/draksambashare:82 standalone/draksambashare:148
+#: standalone/draksambashare:82
+#: standalone/draksambashare:148
 #, fuzzy, c-format
 msgid "Preserve case"
 msgstr "Case Sens"
@@ -19440,7 +19806,8 @@ msgstr "rentetan mod tidak sah: %s"
 msgid "Force group"
 msgstr "kumpulan tidak sah"
 
-#: standalone/draksambashare:85 standalone/draksambashare:147
+#: standalone/draksambashare:85
+#: standalone/draksambashare:147
 #, fuzzy, c-format
 msgid "Default case"
 msgstr "Case Sens"
@@ -19450,7 +19817,8 @@ msgstr "Case Sens"
 msgid "Printer name"
 msgstr "Nama Pencetak"
 
-#: standalone/draksambashare:104 standalone/draksambashare:600
+#: standalone/draksambashare:104
+#: standalone/draksambashare:600
 #, c-format
 msgid "Printable"
 msgstr ""
@@ -19470,7 +19838,8 @@ msgstr "Laksanakan Arahan"
 msgid "Guest ok"
 msgstr "OK"
 
-#: standalone/draksambashare:110 standalone/draksambashare:151
+#: standalone/draksambashare:110
+#: standalone/draksambashare:151
 #: standalone/draksambashare:609
 #, fuzzy, c-format
 msgid "Inherit permissions"
@@ -19551,7 +19920,8 @@ msgstr ""
 msgid "Name of the share:"
 msgstr "Nama perkongsian"
 
-#: standalone/draksambashare:379 standalone/draksambashare:593
+#: standalone/draksambashare:379
+#: standalone/draksambashare:593
 #: standalone/draksambashare:774
 #, c-format
 msgid "Comment:"
@@ -19564,17 +19934,17 @@ msgstr "Laluan:"
 
 #: standalone/draksambashare:385
 #, c-format
-msgid ""
-"Share with the same name already exist or share name empty, please choose "
-"another name."
+msgid "Share with the same name already exist or share name empty, please choose another name."
 msgstr ""
 
-#: standalone/draksambashare:389 standalone/draksambashare:395
+#: standalone/draksambashare:389
+#: standalone/draksambashare:395
 #, c-format
 msgid "Can't create the directory, please enter a correct path."
 msgstr ""
 
-#: standalone/draksambashare:392 standalone/draksambashare:629
+#: standalone/draksambashare:392
+#: standalone/draksambashare:629
 #: standalone/draksambashare:796
 #, fuzzy, c-format
 msgid "Please enter a Comment for this share."
@@ -19582,9 +19952,7 @@ msgstr "Masukkan Perkongsian SMB untuk digunakan."
 
 #: standalone/draksambashare:423
 #, c-format
-msgid ""
-"The wizard successfully added the Samba share. Now just double click on it "
-"in treeview to modify it"
+msgid "The wizard successfully added the Samba share. Now just double click on it in treeview to modify it"
 msgstr ""
 
 #: standalone/draksambashare:439
@@ -19604,8 +19972,7 @@ msgstr ""
 
 #: standalone/draksambashare:447
 #, c-format
-msgid ""
-"Goal of this wizard is to easily create a new special printer Samba share."
+msgid "Goal of this wizard is to easily create a new special printer Samba share."
 msgstr ""
 
 #: standalone/draksambashare:455
@@ -19638,12 +20005,14 @@ msgstr "Nama perkongsian"
 msgid "Printer name:"
 msgstr "Nama Pencetak"
 
-#: standalone/draksambashare:598 standalone/draksambashare:779
+#: standalone/draksambashare:598
+#: standalone/draksambashare:779
 #, fuzzy, c-format
 msgid "Writable:"
 msgstr "_Boleh Tulis"
 
-#: standalone/draksambashare:599 standalone/draksambashare:780
+#: standalone/draksambashare:599
+#: standalone/draksambashare:780
 #, c-format
 msgid "Browseable:"
 msgstr ""
@@ -19737,8 +20106,7 @@ msgstr "Awam"
 
 #: standalone/draksambashare:802
 #, c-format
-msgid ""
-"Create mask, create mode and directory mask should be numeric. ie: 0755."
+msgid "Create mask, create mode and directory mask should be numeric. ie: 0755."
 msgstr ""
 
 #: standalone/draksambashare:809
@@ -19756,7 +20124,8 @@ msgstr "Maklumat Pengguna"
 msgid "User name:"
 msgstr "Nama pengguna:"
 
-#: standalone/draksambashare:935 standalone/harddrake2:601
+#: standalone/draksambashare:935
+#: standalone/harddrake2:601
 #, c-format
 msgid "Password:"
 msgstr "Kata laluan:"
@@ -19856,7 +20225,8 @@ msgstr "lokal"
 msgid "NONE"
 msgstr "tiada"
 
-#: standalone/draksec:53 standalone/net_applet:480
+#: standalone/draksec:53
+#: standalone/net_applet:480
 #, c-format
 msgid "Ignore"
 msgstr "Abai"
@@ -19870,31 +20240,22 @@ msgid ""
 "Here, you can setup the security level and administrator of your machine.\n"
 "\n"
 "\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
+"The '<span weight=\"bold\">Security Administrator</span>' is the one who will receive security alerts if the\n"
+"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a username or an email.\n"
 "\n"
 "\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
+"The '<span weight=\"bold\">Security Level</span>' menu allows you to select one of the six preconfigured security levels\n"
+"provided with msec. These levels range from '<span weight=\"bold\">poor</span>' security and ease of use, to\n"
+"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive server applications:\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
+"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but very\n"
+"easy to use security level. It should only be used for machines not connected to\n"
 "any network and that are not accessible to everybody.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
+"<span foreground=\"royalblue3\">Standard</span>: This is the standard security\n"
+"recommended for a computer that will be used to connect to the Internet as a\n"
 "client.\n"
 "\n"
 "\n"
@@ -19902,16 +20263,12 @@ msgid ""
 "restrictions, and more automatic checks are run every night.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
+"<span foreground=\"royalblue3\">Higher</span>: The security is now high enough\n"
+"to use the system as a server which can accept connections from many clients. If\n"
+"your machine is only a client on the Internet, you should choose a lower level.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
+"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the previous\n"
 "level, but the system is entirely closed and security features are at their\n"
 "maximum"
 msgstr ""
@@ -19922,7 +20279,8 @@ msgstr ""
 "<span foreground=\"royalblue3\"></span> terima on Internet\n"
 "<span foreground=\"royalblue3\"></span> dan"
 
-#: standalone/draksec:156 standalone/harddrake2:208
+#: standalone/draksec:156
+#: standalone/harddrake2:208
 #, fuzzy, c-format
 msgid ""
 "Description of the fields:\n"
@@ -19987,8 +20345,7 @@ msgstr "Tiada pemacu liut dikesan"
 #: standalone/draksound:50
 #, fuzzy, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.\n"
 "\n"
 "\n"
 "You can visit our hardware database at:\n"
@@ -20005,8 +20362,7 @@ msgid ""
 "\n"
 "\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
+"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
 msgstr "dalam."
 
 #: standalone/draksplash:30
@@ -20103,7 +20459,8 @@ msgstr "apa-apa jenis"
 msgid "Choose text color"
 msgstr "Warna teks untuk butang."
 
-#: standalone/draksplash:65 standalone/draksplash:72
+#: standalone/draksplash:65
+#: standalone/draksplash:72
 #, fuzzy, c-format
 msgid "Choose picture"
 msgstr "Pilih secara manual"
@@ -20201,8 +20558,7 @@ msgstr "Selamat Datang"
 msgid ""
 "We're going to add an UPS device.\n"
 "\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
+"Do you want to autodetect UPS devices connected to this machine or to manually select them?"
 msgstr ""
 
 #: standalone/drakups:93
@@ -20210,7 +20566,8 @@ msgstr ""
 msgid "Autodetection"
 msgstr "Auto indent"
 
-#: standalone/drakups:101 standalone/harddrake2:376
+#: standalone/drakups:101
+#: standalone/harddrake2:376
 #, fuzzy, c-format
 msgid "Detection in progress"
 msgstr "Segerak sedang berjalan"
@@ -20225,7 +20582,8 @@ msgstr ""
 msgid "No new UPS devices was found"
 msgstr "Tiada peranti input"
 
-#: standalone/drakups:128 standalone/drakups:140
+#: standalone/drakups:128
+#: standalone/drakups:140
 #, fuzzy, c-format
 msgid "UPS driver configuration"
 msgstr "Konfigurasi Pemuat But"
@@ -20282,8 +20640,11 @@ msgstr ""
 msgid "UPS devices"
 msgstr "Peranti Rangkaian"
 
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:85 standalone/harddrake2:111
+#: standalone/drakups:251
+#: standalone/drakups:270
+#: standalone/drakups:286
+#: standalone/harddrake2:85
+#: standalone/harddrake2:111
 #: standalone/harddrake2:118
 #, c-format
 msgid "Name"
@@ -20314,7 +20675,9 @@ msgstr "Peraturan"
 msgid "Action"
 msgstr "Aksi"
 
-#: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82
+#: standalone/drakups:299
+#: standalone/drakvpn:1132
+#: standalone/harddrake2:82
 #, c-format
 msgid "Level"
 msgstr "Aras"
@@ -20324,7 +20687,9 @@ msgstr "Aras"
 msgid "ACL name"
 msgstr "Nama penuh"
 
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
+#: standalone/drakups:329
+#: standalone/drakups:333
+#: standalone/drakups:342
 #, c-format
 msgid "DrakUPS"
 msgstr "DrakUPS"
@@ -20359,12 +20724,15 @@ msgstr "Internet siap dihidupkan?"
 msgid "disable"
 msgstr "Matikan"
 
-#: standalone/drakvpn:101 standalone/drakvpn:127
+#: standalone/drakvpn:101
+#: standalone/drakvpn:127
 #, fuzzy, c-format
 msgid "reconfigure"
 msgstr "Ulangtetap"
 
-#: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362
+#: standalone/drakvpn:101
+#: standalone/drakvpn:127
+#: standalone/drakvpn:362
 #: standalone/drakvpn:721
 #, c-format
 msgid "dismiss"
@@ -20410,7 +20778,8 @@ msgstr "Sambungan CIPE (VPN)"
 msgid "The VPN connection is now enabled."
 msgstr "Internet dihidupkan."
 
-#: standalone/drakvpn:155 standalone/drakvpn:183
+#: standalone/drakvpn:155
+#: standalone/drakvpn:183
 #, fuzzy, c-format
 msgid "Simple VPN setup."
 msgstr "Tetapan Pempartisyenan Cakera"
@@ -20477,7 +20846,8 @@ msgstr "Model Keselamatan:"
 msgid "IKE daemon racoon"
 msgstr "memulakan daemon %s berjaya."
 
-#: standalone/drakvpn:281 standalone/drakvpn:292
+#: standalone/drakvpn:281
+#: standalone/drakvpn:292
 #, fuzzy, c-format
 msgid "Configuration file"
 msgstr "Fail tetapan:"
@@ -20503,7 +20873,8 @@ msgid ""
 "Simply click on Next.\n"
 msgstr ""
 
-#: standalone/drakvpn:311 standalone/drakvpn:671
+#: standalone/drakvpn:311
+#: standalone/drakvpn:671
 #, fuzzy, c-format
 msgid "%s entries"
 msgstr "Input:"
@@ -20522,19 +20893,23 @@ msgid ""
 "What would you like to do?\n"
 msgstr ""
 
-#: standalone/drakvpn:319 standalone/drakvpn:680
+#: standalone/drakvpn:319
+#: standalone/drakvpn:680
 #, fuzzy, c-format
 msgid ""
 "_:display here is a verb\n"
 "Display"
 msgstr "Paparan Default"
 
-#: standalone/drakvpn:319 standalone/drakvpn:680
+#: standalone/drakvpn:319
+#: standalone/drakvpn:680
 #, c-format
 msgid "Commit"
 msgstr "Laksana"
 
-#: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695
+#: standalone/drakvpn:333
+#: standalone/drakvpn:337
+#: standalone/drakvpn:695
 #: standalone/drakvpn:699
 #, fuzzy, c-format
 msgid ""
@@ -20587,12 +20962,15 @@ msgstr "Pencetak Default"
 msgid "normal conn"
 msgstr "Pengguna Biasa"
 
-#: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496
+#: standalone/drakvpn:368
+#: standalone/drakvpn:409
+#: standalone/drakvpn:496
 #, fuzzy, c-format
 msgid "Exists!"
 msgstr "%s: Fail wujud"
 
-#: standalone/drakvpn:369 standalone/drakvpn:410
+#: standalone/drakvpn:369
+#: standalone/drakvpn:410
 #, c-format
 msgid ""
 "A section with this name already exists.\n"
@@ -20677,27 +21055,32 @@ msgstr "Mampat ke MP3"
 msgid "disablearrivalcheck"
 msgstr ""
 
-#: standalone/drakvpn:441 standalone/drakvpn:480
+#: standalone/drakvpn:441
+#: standalone/drakvpn:480
 #, c-format
 msgid "left"
 msgstr "kiri"
 
-#: standalone/drakvpn:442 standalone/drakvpn:481
+#: standalone/drakvpn:442
+#: standalone/drakvpn:481
 #, c-format
 msgid "leftcert"
 msgstr ""
 
-#: standalone/drakvpn:443 standalone/drakvpn:482
+#: standalone/drakvpn:443
+#: standalone/drakvpn:482
 #, c-format
 msgid "leftrsasigkey"
 msgstr ""
 
-#: standalone/drakvpn:444 standalone/drakvpn:483
+#: standalone/drakvpn:444
+#: standalone/drakvpn:483
 #, c-format
 msgid "leftsubnet"
 msgstr ""
 
-#: standalone/drakvpn:445 standalone/drakvpn:484
+#: standalone/drakvpn:445
+#: standalone/drakvpn:484
 #, c-format
 msgid "leftnexthop"
 msgstr ""
@@ -20771,7 +21154,8 @@ msgid ""
 "Choose continue when you are done to write the data.\n"
 msgstr ""
 
-#: standalone/drakvpn:562 standalone/drakvpn:812
+#: standalone/drakvpn:562
+#: standalone/drakvpn:812
 #, fuzzy, c-format
 msgid "Edit section"
 msgstr "Ubah penggantian"
@@ -20785,7 +21169,9 @@ msgid ""
 "and then click on next.\n"
 msgstr ""
 
-#: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817
+#: standalone/drakvpn:566
+#: standalone/drakvpn:646
+#: standalone/drakvpn:817
 #: standalone/drakvpn:863
 #, fuzzy, c-format
 msgid "Section names"
@@ -20845,12 +21231,14 @@ msgid ""
 "Choose continue when you are done to write the data.\n"
 msgstr ""
 
-#: standalone/drakvpn:642 standalone/drakvpn:859
+#: standalone/drakvpn:642
+#: standalone/drakvpn:859
 #, fuzzy, c-format
 msgid "Remove section"
 msgstr "tak dapat membuang %s"
 
-#: standalone/drakvpn:643 standalone/drakvpn:860
+#: standalone/drakvpn:643
+#: standalone/drakvpn:860
 #, c-format
 msgid ""
 "Your %s file has several sections or connections.\n"
@@ -20955,7 +21343,8 @@ msgid ""
 "Pre-shared key authentication method in phase 1."
 msgstr ""
 
-#: standalone/drakvpn:756 standalone/drakvpn:849
+#: standalone/drakvpn:756
+#: standalone/drakvpn:849
 #, fuzzy, c-format
 msgid "real file"
 msgstr "Fail Baru"
@@ -21211,8 +21600,7 @@ msgid ""
 "        lifetime time 60 sec;\n"
 "\tlifetime time 12 hour;\n"
 "\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
+"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and 'hour'.\n"
 msgstr ""
 
 #: standalone/drakvpn:1019
@@ -21271,12 +21659,16 @@ msgstr ""
 msgid "Generate policy"
 msgstr "Jenis Polisi:"
 
-#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
+#: standalone/drakvpn:1047
+#: standalone/drakvpn:1063
+#: standalone/drakvpn:1076
 #, c-format
 msgid "off"
 msgstr "off"
 
-#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
+#: standalone/drakvpn:1047
+#: standalone/drakvpn:1063
+#: standalone/drakvpn:1076
 #, c-format
 msgid "on"
 msgstr "on"
@@ -21444,7 +21836,8 @@ msgstr "integer diluar julat: %s"
 msgid "Upper-layer protocol"
 msgstr "<tr><td><i>Protokol</i></td>%1</tr>"
 
-#: standalone/drakvpn:1122 standalone/drakvpn:1129
+#: standalone/drakvpn:1122
+#: standalone/drakvpn:1129
 #, fuzzy, c-format
 msgid "any"
 msgstr "Sebarang"
@@ -21625,8 +22018,7 @@ msgstr "Tetapkan kad TV"
 #: standalone/drakxtv:151
 #, fuzzy, c-format
 msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
+"No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
 "You can visit our hardware database at:\n"
@@ -21649,20 +22041,18 @@ msgstr ""
 
 #: standalone/harddrake2:29
 #, fuzzy, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr "on USB"
 
-#: standalone/harddrake2:31 standalone/harddrake2:146
+#: standalone/harddrake2:31
+#: standalone/harddrake2:146
 #, fuzzy, c-format
 msgid "Bus identification"
 msgstr "Pengenalan klien:"
 
 #: standalone/harddrake2:32
 #, fuzzy, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "- PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids"
 msgstr "dan USB dan USB"
 
 #: standalone/harddrake2:35
@@ -21754,7 +22144,8 @@ msgstr ""
 msgid "class of hardware device"
 msgstr "Guna hanya peranti perkakasan"
 
-#: standalone/harddrake2:51 standalone/harddrake2:83
+#: standalone/harddrake2:51
+#: standalone/harddrake2:83
 #: standalone/printerdrake:224
 #, c-format
 msgid "Model"
@@ -21872,10 +22263,7 @@ msgstr "Bogomips"
 
 #: standalone/harddrake2:66
 #, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to \"benchmark\" the cpu."
 msgstr ""
 
 #: standalone/harddrake2:67
@@ -21926,10 +22314,7 @@ msgstr "CPU %1: %2, %3 MHz"
 
 #: standalone/harddrake2:73
 #, fuzzy, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)"
 msgstr "dalam dalam"
 
 #: standalone/harddrake2:74
@@ -21949,10 +22334,7 @@ msgstr "/_Lapor Pepijat"
 
 #: standalone/harddrake2:76
 #, fuzzy, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+msgid "Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)"
 msgstr "dalam"
 
 #: standalone/harddrake2:77
@@ -21992,9 +22374,7 @@ msgstr "/_Lapor Pepijat"
 
 #: standalone/harddrake2:81
 #, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used"
 msgstr ""
 
 #: standalone/harddrake2:82
@@ -22054,10 +22434,7 @@ msgstr "Perlindungan Topik"
 
 #: standalone/harddrake2:89
 #, fuzzy, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
+msgid "the WP flag in the CR0 register of the cpu enforce write protection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)"
 msgstr "dalam pengguna"
 
 #: standalone/harddrake2:93
@@ -22098,8 +22475,7 @@ msgstr "Jumlah Volum Logikal:"
 #: standalone/harddrake2:99
 #, c-format
 msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
+"the SCSI target number (LUN). SCSI devices connected to a host are uniquely identified by a\n"
 "channel number, a target id and a logical unit number"
 msgstr ""
 
@@ -22156,8 +22532,7 @@ msgstr "Fail Peranti"
 
 #: standalone/harddrake2:115
 #, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
+msgid "the device file used to communicate with the kernel driver for the mouse"
 msgstr ""
 
 #: standalone/harddrake2:116
@@ -22205,14 +22580,17 @@ msgstr ""
 msgid "the protocol that the graphical desktop use with the mouse"
 msgstr ""
 
-#: standalone/harddrake2:128 standalone/harddrake2:137
-#: standalone/harddrake2:144 standalone/harddrake2:152
+#: standalone/harddrake2:128
+#: standalone/harddrake2:137
+#: standalone/harddrake2:144
+#: standalone/harddrake2:152
 #: standalone/harddrake2:342
 #, fuzzy, c-format
 msgid "Identification"
 msgstr "Pengenalan klien:"
 
-#: standalone/harddrake2:129 standalone/harddrake2:145
+#: standalone/harddrake2:129
+#: standalone/harddrake2:145
 #, c-format
 msgid "Connection"
 msgstr "Perhubungan"
@@ -22250,16 +22628,22 @@ msgid "Features"
 msgstr "Sifat"
 
 #. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:176 standalone/logdrake:76
-#: standalone/printerdrake:146 standalone/printerdrake:159
+#: standalone/harddrake2:176
+#: standalone/logdrake:76
+#: standalone/printerdrake:146
+#: standalone/printerdrake:159
 #: standalone/printerdrake:171
 #, c-format
 msgid "/_Options"
 msgstr "/_Pilihan"
 
-#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
-#: standalone/printerdrake:172 standalone/printerdrake:174
-#: standalone/printerdrake:177 standalone/printerdrake:179
+#: standalone/harddrake2:177
+#: standalone/harddrake2:203
+#: standalone/logdrake:78
+#: standalone/printerdrake:172
+#: standalone/printerdrake:174
+#: standalone/printerdrake:177
+#: standalone/printerdrake:179
 #, c-format
 msgid "/_Help"
 msgstr "/_Bantuan"
@@ -22289,7 +22673,8 @@ msgstr ""
 msgid "/_Upload the hardware list"
 msgstr "eksport / import senarai perkakasan"
 
-#: standalone/harddrake2:192 standalone/printerdrake:152
+#: standalone/harddrake2:192
+#: standalone/printerdrake:152
 #, c-format
 msgid "/_Quit"
 msgstr "/_Keluar"
@@ -22306,17 +22691,17 @@ msgstr "Bantuan"
 
 #: standalone/harddrake2:216
 #, fuzzy, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")"
 msgstr "dalam on Maklumat"
 
-#: standalone/harddrake2:222 standalone/printerdrake:177
+#: standalone/harddrake2:222
+#: standalone/printerdrake:177
 #, c-format
 msgid "/_Report Bug"
 msgstr "/_Lapor Pepijat"
 
-#: standalone/harddrake2:224 standalone/printerdrake:179
+#: standalone/harddrake2:224
+#: standalone/printerdrake:179
 #, c-format
 msgid "/_About..."
 msgstr "/_Perihal..."
@@ -22332,8 +22717,7 @@ msgstr "Perihal X-Chat"
 msgid ""
 "This is HardDrake, a %s hardware configuration tool.\n"
 "<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
+"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;tvignaud@mandriva.com&gt;\n"
 "\n"
 msgstr ""
 
@@ -22359,11 +22743,11 @@ msgstr "Alatan Penukar Desktop"
 
 #: standalone/harddrake2:309
 #, fuzzy, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "Click on a device in the left tree in order to display its information here."
 msgstr "on dalam dalam."
 
-#: standalone/harddrake2:330 standalone/printerdrake:306
+#: standalone/harddrake2:330
+#: standalone/printerdrake:306
 #: standalone/printerdrake:320
 #, c-format
 msgid "Unknown"
@@ -22396,13 +22780,11 @@ msgstr "DVD"
 
 #: standalone/harddrake2:512
 #, c-format
-msgid ""
-"The following devices needs proprietary drivers or firmwares in order to "
-"operate smoothly. The appropriate packages can be retrieved from the "
-"Mandriva Club. Do you want to subscribe to the Mandriva Club?"
+msgid "The following devices needs proprietary drivers or firmwares in order to operate smoothly. The appropriate packages can be retrieved from the Mandriva Club. Do you want to subscribe to the Mandriva Club?"
 msgstr ""
 
-#: standalone/harddrake2:595 standalone/harddrake2:598
+#: standalone/harddrake2:595
+#: standalone/harddrake2:598
 #, fuzzy, c-format
 msgid "Upload the hardware list"
 msgstr "eksport / import senarai perkakasan"
@@ -22438,7 +22820,8 @@ msgid "You should install the following packages: %s"
 msgstr ""
 
 #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: standalone/localedrake:47 standalone/scannerdrake:135
+#: standalone/localedrake:47
+#: standalone/scannerdrake:135
 #, c-format
 msgid ", "
 msgstr ", "
@@ -22551,7 +22934,9 @@ msgstr "cari"
 msgid "A tool to monitor your logs"
 msgstr "Pilih monitor yang disambung pada sistem anda."
 
-#: standalone/logdrake:128 standalone/net_applet:347 standalone/net_monitor:93
+#: standalone/logdrake:128
+#: standalone/net_applet:347
+#: standalone/net_monitor:93
 #, c-format
 msgid "Settings"
 msgstr "Setting"
@@ -22581,7 +22966,8 @@ msgstr "Kalendar"
 msgid "Content of the file"
 msgstr "Fail Baru"
 
-#: standalone/logdrake:164 standalone/logdrake:402
+#: standalone/logdrake:164
+#: standalone/logdrake:402
 #, fuzzy, c-format
 msgid "Mail alert"
 msgstr "GenericName=Amaran Mel"
@@ -22661,9 +23047,7 @@ msgstr "Tetapan disimpan."
 
 #: standalone/logdrake:417
 #, fuzzy, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "You will receive an alert if one of the selected services is no longer running"
 msgstr "tidak"
 
 #: standalone/logdrake:424
@@ -22744,13 +23128,15 @@ msgstr "Rangkaian tidak dapat dicapai."
 msgid "Network is down on interface %s. Click on \"Configure Network\""
 msgstr "Rangkaian"
 
-#: standalone/net_applet:56 standalone/net_applet:76
+#: standalone/net_applet:56
+#: standalone/net_applet:76
 #: standalone/net_monitor:468
 #, fuzzy, c-format
 msgid "Connect %s"
 msgstr "Sambung"
 
-#: standalone/net_applet:57 standalone/net_applet:76
+#: standalone/net_applet:57
+#: standalone/net_applet:76
 #: standalone/net_monitor:468
 #, fuzzy, c-format
 msgid "Disconnect %s"
@@ -22866,7 +23252,8 @@ msgstr "pengisytiharan semula jenis untuk %s"
 msgid "Always blacklist (do not ask again)"
 msgstr ""
 
-#: standalone/net_monitor:57 standalone/net_monitor:62
+#: standalone/net_monitor:57
+#: standalone/net_monitor:62
 #, fuzzy, c-format
 msgid "Network Monitoring"
 msgstr "Rangkaian tidak dapat dicapai."
@@ -22919,12 +23306,14 @@ msgstr ""
 msgid "Wait please, testing your connection..."
 msgstr "Menyahaktifkan sambungan IPsec %s, sila tunggu..."
 
-#: standalone/net_monitor:182 standalone/net_monitor:195
+#: standalone/net_monitor:182
+#: standalone/net_monitor:195
 #, fuzzy, c-format
 msgid "Disconnecting from Internet "
 msgstr "Internet Asas-teks"
 
-#: standalone/net_monitor:182 standalone/net_monitor:195
+#: standalone/net_monitor:182
+#: standalone/net_monitor:195
 #, c-format
 msgid "Connecting to Internet "
 msgstr "Menyambung ke Internet"
@@ -22956,12 +23345,14 @@ msgstr "dalam."
 msgid "Color configuration"
 msgstr "Status konfigurasi bagi %s %s\n"
 
-#: standalone/net_monitor:383 standalone/net_monitor:403
+#: standalone/net_monitor:383
+#: standalone/net_monitor:403
 #, c-format
 msgid "sent: "
 msgstr "dihantar:"
 
-#: standalone/net_monitor:390 standalone/net_monitor:407
+#: standalone/net_monitor:390
+#: standalone/net_monitor:407
 #, fuzzy, c-format
 msgid "received: "
 msgstr "isyarat %d diterima: %s"
@@ -22978,9 +23369,7 @@ msgstr "Sistem ukuran:"
 
 #: standalone/net_monitor:461
 #, fuzzy, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Warning, another internet connection has been detected, maybe using your network"
 msgstr "Amaran"
 
 #: standalone/net_monitor:472
@@ -22998,15 +23387,19 @@ msgstr "Membaca."
 msgid "%s Printer Management Tool"
 msgstr "Alatan Mengurus Folder Terenkrip"
 
-#: standalone/printerdrake:142 standalone/printerdrake:143
-#: standalone/printerdrake:144 standalone/printerdrake:145
-#: standalone/printerdrake:153 standalone/printerdrake:154
+#: standalone/printerdrake:142
+#: standalone/printerdrake:143
+#: standalone/printerdrake:144
+#: standalone/printerdrake:145
+#: standalone/printerdrake:153
+#: standalone/printerdrake:154
 #: standalone/printerdrake:158
 #, c-format
 msgid "/_Actions"
 msgstr "/_Aksi"
 
-#: standalone/printerdrake:142 standalone/printerdrake:154
+#: standalone/printerdrake:142
+#: standalone/printerdrake:154
 #, c-format
 msgid "/_Add Printer"
 msgstr "/_Tambah Pencetak"
@@ -23056,12 +23449,14 @@ msgstr "Cari:"
 msgid "Apply filter"
 msgstr "Terap tapisan"
 
-#: standalone/printerdrake:224 standalone/printerdrake:231
+#: standalone/printerdrake:224
+#: standalone/printerdrake:231
 #, c-format
 msgid "Def."
 msgstr ""
 
-#: standalone/printerdrake:224 standalone/printerdrake:231
+#: standalone/printerdrake:224
+#: standalone/printerdrake:231
 #, c-format
 msgid "Printer Name"
 msgstr "Nama Pencetak"
@@ -23125,14 +23520,18 @@ msgstr "/_Konfigurasikan CUPS"
 msgid "Configure CUPS printing system"
 msgstr "CUPS - Common Unix Printing System"
 
-#: standalone/printerdrake:310 standalone/printerdrake:324
-#: standalone/printerdrake:348 standalone/printerdrake:360
+#: standalone/printerdrake:310
+#: standalone/printerdrake:324
+#: standalone/printerdrake:348
+#: standalone/printerdrake:360
 #, c-format
 msgid "Enabled"
 msgstr "Hidupkan"
 
-#: standalone/printerdrake:310 standalone/printerdrake:324
-#: standalone/printerdrake:348 standalone/printerdrake:360
+#: standalone/printerdrake:310
+#: standalone/printerdrake:324
+#: standalone/printerdrake:348
+#: standalone/printerdrake:360
 #, c-format
 msgid "Disabled"
 msgstr "Matikan"
@@ -23163,8 +23562,7 @@ msgstr "ralat memuatkan %1, berhenti\n"
 
 #: standalone/scannerdrake:60
 #, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
+msgid "Could not install the packages needed to set up a scanner with Scannerdrake."
 msgstr ""
 
 #: standalone/scannerdrake:61
@@ -23172,17 +23570,20 @@ msgstr ""
 msgid "Scannerdrake will not be started now."
 msgstr "Papan dock aplet tidak dapat dimulakan: %1"
 
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
+#: standalone/scannerdrake:67
+#: standalone/scannerdrake:491
 #, fuzzy, c-format
 msgid "Searching for configured scanners..."
 msgstr "Aplikasi telah dikonfigurasikan untuk pemindahan"
 
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
+#: standalone/scannerdrake:71
+#: standalone/scannerdrake:495
 #, fuzzy, c-format
 msgid "Searching for new scanners..."
 msgstr "Memeriksa perkakasan baru"
 
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
+#: standalone/scannerdrake:79
+#: standalone/scannerdrake:517
 #, c-format
 msgid "Re-generating list of configured scanners..."
 msgstr ""
@@ -23222,7 +23623,8 @@ msgstr "Model Keselamatan:"
 msgid "Port: %s"
 msgstr "Liang: %s"
 
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
+#: standalone/scannerdrake:138
+#: standalone/scannerdrake:141
 #, fuzzy, c-format
 msgid " (UNSUPPORTED)"
 msgstr "Protokol tidak tersokong"
@@ -23232,38 +23634,38 @@ msgstr "Protokol tidak tersokong"
 msgid "The %s is not supported under Linux."
 msgstr "Protokol terpilih tidak disokong."
 
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
+#: standalone/scannerdrake:171
+#: standalone/scannerdrake:185
 #, fuzzy, c-format
 msgid "Do not install firmware file"
 msgstr "_Jangan pasang pemuat but"
 
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
+#: standalone/scannerdrake:175
+#: standalone/scannerdrake:227
 #, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
+msgid "It is possible that your %s needs its firmware to be uploaded everytime when it is turned on."
 msgstr ""
 
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
+#: standalone/scannerdrake:176
+#: standalone/scannerdrake:228
 #, c-format
 msgid "If this is the case, you can make this be done automatically."
 msgstr ""
 
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
+#: standalone/scannerdrake:177
+#: standalone/scannerdrake:231
 #, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
+msgid "To do so, you need to supply the firmware file for your scanner so that it can be installed."
 msgstr ""
 
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
+#: standalone/scannerdrake:178
+#: standalone/scannerdrake:232
 #, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
+msgid "You find the file on the CD or floppy coming with the scanner, on the manufacturer's home page, or on your Windows partition."
 msgstr ""
 
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
+#: standalone/scannerdrake:180
+#: standalone/scannerdrake:239
 #, fuzzy, c-format
 msgid "Install firmware file from"
 msgstr "Fail untuk dimasukkan [daripada %s] "
@@ -23273,31 +23675,25 @@ msgstr "Fail untuk dimasukkan [daripada %s] "
 msgid "Select firmware file"
 msgstr "Pilih Fail Log"
 
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
+#: standalone/scannerdrake:203
+#: standalone/scannerdrake:262
 #, fuzzy, c-format
 msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-"Menamatkan, <p>Fail <strong>%1</strong> tidak wujud atau tidak boleh dibaca."
+msgstr "Menamatkan, <p>Fail <strong>%1</strong> tidak wujud atau tidak boleh dibaca."
 
 #: standalone/scannerdrake:226
 #, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
+msgid "It is possible that your scanners need their firmware to be uploaded everytime when they are turned on."
 msgstr ""
 
 #: standalone/scannerdrake:230
 #, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
+msgid "To do so, you need to supply the firmware files for your scanners so that it can be installed."
 msgstr ""
 
 #: standalone/scannerdrake:233
 #, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
+msgid "If you have already installed your scanner's firmware you can update the firmware here by supplying the new firmware file."
 msgstr ""
 
 #: standalone/scannerdrake:235
@@ -23332,13 +23728,15 @@ msgid ""
 "You can launch printerdrake from the %s Control Center in Hardware section."
 msgstr "dalam Perkakasan."
 
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
+#: standalone/scannerdrake:308
+#: standalone/scannerdrake:315
 #: standalone/scannerdrake:345
 #, fuzzy, c-format
 msgid "Auto-detect available ports"
 msgstr "Auto-kesan dan konfigurasi kad bunyi"
 
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
+#: standalone/scannerdrake:310
+#: standalone/scannerdrake:356
 #, c-format
 msgid "Please select the device where your %s is attached"
 msgstr ""
@@ -23348,7 +23746,8 @@ msgstr ""
 msgid "(Note: Parallel ports cannot be auto-detected)"
 msgstr "port"
 
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
+#: standalone/scannerdrake:313
+#: standalone/scannerdrake:358
 #, fuzzy, c-format
 msgid "choose device"
 msgstr "peranti tidak sah %s %s"
@@ -23363,7 +23762,8 @@ msgstr "Mencari  pemasang %s ..."
 msgid "Setting up kernel modules..."
 msgstr "Menetapkan jam sistem"
 
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
+#: standalone/scannerdrake:390
+#: standalone/scannerdrake:397
 #, fuzzy, c-format
 msgid "Attention!"
 msgstr "W&arna perhatian:"
@@ -23373,36 +23773,29 @@ msgstr "W&arna perhatian:"
 msgid ""
 "Your %s cannot be configured fully automatically.\n"
 "\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
+"Manual adjustments are required. Please edit the configuration file /etc/sane.d/%s.conf. "
 msgstr ""
 
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
+#: standalone/scannerdrake:392
+#: standalone/scannerdrake:401
 #, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
+msgid "More info in the driver's manual page. Run the command \"man sane-%s\" to read it."
 msgstr ""
 
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
+#: standalone/scannerdrake:394
+#: standalone/scannerdrake:403
 #, fuzzy, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
+msgid "After that you may scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu."
 msgstr "Multimedia Grafik dalam."
 
 #: standalone/scannerdrake:398
 #, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
+msgid "Your %s has been configured, but it is possible that additional manual adjustments are needed to get it to work. "
 msgstr ""
 
 #: standalone/scannerdrake:399
 #, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
+msgid "If it does not appear in the list of configured scanners in the main window of Scannerdrake or if it does not work correctly, "
 msgstr ""
 
 #: standalone/scannerdrake:400
@@ -23414,8 +23807,7 @@ msgstr "Ralat dalam fail tetapan /etc/named.conf : $named_err"
 #, fuzzy, c-format
 msgid ""
 "Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
+"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu."
 msgstr "Multimedia Grafik dalam."
 
 #: standalone/scannerdrake:431
@@ -23436,7 +23828,8 @@ msgid ""
 "is available on your system.\n"
 msgstr "on"
 
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
+#: standalone/scannerdrake:435
+#: standalone/scannerdrake:438
 #, fuzzy, c-format
 msgid "There are no scanners found which are available on your system.\n"
 msgstr "tidak on"
@@ -23461,28 +23854,26 @@ msgstr "fail sumber, pepohon pemasangan"
 msgid "Scanner sharing"
 msgstr "Perkongsian Ruang Kerja"
 
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
+#: standalone/scannerdrake:530
+#: standalone/scannerdrake:695
 #, fuzzy, c-format
 msgid "All remote machines"
 msgstr "Logmasuk Jauh (SSH)"
 
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
+#: standalone/scannerdrake:542
+#: standalone/scannerdrake:845
 #, fuzzy, c-format
 msgid "This machine"
 msgstr "Nama mesin:"
 
 #: standalone/scannerdrake:582
 #, fuzzy, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
+msgid "Here you can choose whether the scanners connected to this machine should be accessible by remote machines and by which remote machines."
 msgstr "dan."
 
 #: standalone/scannerdrake:583
 #, fuzzy, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "You can also decide here whether scanners on remote machines should be made available on this machine."
 msgstr "on on."
 
 #: standalone/scannerdrake:586
@@ -23505,7 +23896,8 @@ msgstr "on"
 msgid "Use the scanners on hosts: "
 msgstr "Guna DNS untuk resolve hos kepada realm"
 
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
+#: standalone/scannerdrake:632
+#: standalone/scannerdrake:704
 #: standalone/scannerdrake:854
 #, fuzzy, c-format
 msgid "Sharing of local scanners"
@@ -23513,45 +23905,53 @@ msgstr "Perkongsian fail tempatan"
 
 #: standalone/scannerdrake:633
 #, fuzzy, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+msgid "These are the machines on which the locally connected scanner(s) should be available:"
 msgstr "on:"
 
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
+#: standalone/scannerdrake:644
+#: standalone/scannerdrake:794
 #, c-format
 msgid "Add host"
 msgstr "Tambah hos"
 
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
+#: standalone/scannerdrake:650
+#: standalone/scannerdrake:800
 #, c-format
 msgid "Edit selected host"
 msgstr "Edit hos dipilih"
 
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
+#: standalone/scannerdrake:659
+#: standalone/scannerdrake:809
 #, fuzzy, c-format
 msgid "Remove selected host"
 msgstr "Edit hos dipilih"
 
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
+#: standalone/scannerdrake:683
+#: standalone/scannerdrake:691
+#: standalone/scannerdrake:696
+#: standalone/scannerdrake:742
+#: standalone/scannerdrake:833
+#: standalone/scannerdrake:841
+#: standalone/scannerdrake:846
+#: standalone/scannerdrake:892
 #, fuzzy, c-format
 msgid "Name/IP address of host:"
 msgstr "Hos Maya asas IP"
 
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
+#: standalone/scannerdrake:705
+#: standalone/scannerdrake:855
 #, fuzzy, c-format
 msgid "Choose the host on which the local scanners should be made available:"
 msgstr "on lokal:"
 
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
+#: standalone/scannerdrake:716
+#: standalone/scannerdrake:866
 #, fuzzy, c-format
 msgid "You must enter a host name or an IP address.\n"
 msgstr "IP"
 
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
+#: standalone/scannerdrake:727
+#: standalone/scannerdrake:877
 #, fuzzy, c-format
 msgid "This host is already in the list, it cannot be added again.\n"
 msgstr "dalam"
@@ -23574,7 +23974,8 @@ msgid ""
 "Do you want to install the saned package?"
 msgstr ""
 
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
+#: standalone/scannerdrake:944
+#: standalone/scannerdrake:948
 #, c-format
 msgid "Your scanner(s) will not be available on the network."
 msgstr ""
@@ -23760,3 +24161,4 @@ msgstr ""
 #, c-format
 msgid "Installation failed"
 msgstr "Instalasi gagal"
+
-- 
cgit v1.2.1