summaryrefslogtreecommitdiffstats
path: root/perl-install/network/adsl.pm
Commit message (Expand)AuthorAgeFilesLines
* (adsl_probe_info) fix old typo, do not reset vpi and vci if vpi isOlivier Blin2004-09-231-1/+1
* (adsl_conf_backend) do not let speedtouch-start launch connectionOlivier Blin2004-09-201-1/+2
* (adsl_conf_backend) use avmadsl option for capi cards to use settingsOlivier Blin2004-09-201-1/+1
* (adsl_conf_backend) make sure the speedtch kernel module won't be hiddenOlivier Blin2004-09-171-1/+3
* stop capi service before new config is written so that capiinit can unload th...Olivier Blin2004-09-161-1/+1
* do not add prefix in path given to ensure_is_installed ! (i.e. replace untest...Olivier Blin2004-09-151-1/+1
* add commentOlivier Blin2004-09-151-0/+2
* (adsl_conf_backend) don't create empty pppoe.conf if the package isn'tOlivier Blin2004-09-151-7/+11
* load modules and run start programs in standalone too, so that it willOlivier Blin2004-09-151-7/+5
* fix PPPoA caseThierry Vignaud2004-09-151-1/+1
* (adsl_conf_backend) move isdn4k-utils installation hereOlivier Blin2004-09-141-0/+1
* (adsl_conf_backend) remove ifcfg-sagemOlivier Blin2004-09-141-1/+3
* (adsl_conf_backend) support dsl over capiOlivier Blin2004-09-141-2/+39
* load modules for pppoe connections during install (partial fix for #11189)Olivier Blin2004-09-071-0/+1
* (adsl_conf_backend) explode sagem specific stuff to sagem_set_parameters()Olivier Blin2004-09-061-13/+15
* adapt to new fctStartAdslOlivier Blin2004-09-031-1/+1
* write ifcfg files for NET_DEVICE if it's ethernet (pptp, pppoe)Olivier Blin2004-08-301-2/+14
* write metric in ifcfg files according to connection typeOlivier Blin2004-08-271-0/+2
* protocol names, trademark and acronyms should be upcaseThierry Vignaud2004-08-231-5/+5
* typo fixesThierry Vignaud2004-08-191-1/+1
* fix sagem pty quotingOlivier Blin2004-08-171-1/+1
* sagem: don't run pppoa if the ethernet interface isn't created and useOlivier Blin2004-08-171-1/+1
* do not write noipdefault in /etc/ppp/peers/ppp0 for pptp connectionsOlivier Blin2004-08-161-1/+2
* (adsl_probe_info) net_cnx_up is obsolete, pptp info is available inOlivier Blin2004-08-161-2/+0
* (adsl_conf_backend) don't write net cnx scripts, internet serviceOlivier Blin2004-08-161-2/+0
* remove useless assignment (already done in adsl_protocol step)Olivier Blin2004-08-161-1/+0
* fix pppoe with sagem (write ETH=`/usr/sbin/eaglectrl -i` instead of ETH=sagem)Olivier Blin2004-08-161-1/+2
* mount /proc, /sys and /proc/usb/usb in $prefix ASAP instead of doing it at va...Pascal Rigaux2004-08-101-6/+0
* mounting device "none" is cleanerPascal Rigaux2004-08-101-1/+1
* (network::adsl::adsl_conf_backend) add ppp_async alias for sagemOlivier Blin2004-08-061-2/+3
* (adsl_conf_backend) let's have a better looking mesageThierry Vignaud2004-08-061-1/+1
* fix titypoOlivier Blin2004-08-061-1/+1
* try to load all modules that may be needed to establish connexionOlivier Blin2004-08-061-2/+4
* (adsl_conf_backend) only try to mount /proc if it wasn't (eg if weThierry Vignaud2004-08-061-1/+1
* try to mount proc fs too, in case it wasn't done earlierOlivier Blin2004-08-061-0/+1
* try to mount usbdevfs in $::prefix before attempting to run adsl startOlivier Blin2004-08-051-1/+5
* quiet perl_checkerThierry Vignaud2004-08-051-2/+2
* (adsl_conf_backend) fix error messageThierry Vignaud2004-08-051-1/+1
* log module loading faillureThierry Vignaud2004-08-041-1/+2
* catch die from modules::loadOlivier Blin2004-08-041-1/+1
* add modules arrays and use modules::load to be able to load modulesOlivier Blin2004-08-041-9/+8
* in sagem start section, modprobe eagle-usb and do not wait for syncOlivier Blin2004-08-021-1/+4
* in speedtouch start section, modprobe speedtch module and useOlivier Blin2004-08-021-1/+4
* in install, run modem start scripts once config is writtenOlivier Blin2004-08-021-0/+2
* sagem: use fctStartAdsl to wait for sync, up the interface and get interface ...Olivier Blin2004-07-301-1/+1
* split server and plugin options, in order to support again bewanOlivier Blin2004-07-291-4/+9
* do not write a blank "pty" option in ppp config file is there is noOlivier Blin2004-07-281-1/+2
* '-e 1' option is unneeded with speedtouch >= 1.3Olivier Blin2004-07-271-1/+1
* pptp connections are now handled by pppd (#6515)Olivier Blin2004-07-231-5/+0
* - %modules::conf is no more a global, so many functions need passing $modules...Pascal Rigaux2004-07-211-3/+3