summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/bootloader.pm113
1 files changed, 6 insertions, 107 deletions
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
index cd549685a..c484b121b 100644
--- a/perl-install/bootloader.pm
+++ b/perl-install/bootloader.pm
@@ -131,7 +131,7 @@ sub read_grub() {
#- sanitize
foreach (@{$b{entries}}) {
my ($vga, $other) = partition { /^vga=/ } split(' ', $_->{append});
- if ($vga) {
+ if (@$vga) {
$_->{vga} = $vga->[0] =~ /vga=(.*)/ && $1;
$_->{append} = join(' ', @$other);
}
@@ -337,7 +337,7 @@ sub pack_append {
#- normalize
$simple = [ reverse(uniq(reverse @$simple)) ];
- $dict = [ reverse(uniq_ { my ($k, $v) = @{$_[0]}; $k eq 'mem' ? "$k=$v" : $k } reverse @$dict) ];
+ $dict = [ reverse(uniq_ { my ($k, $v) = @$_; $k eq 'mem' ? "$k=$v" : $k } reverse @$dict) ];
join(' ', @$simple, map { "$_->[0]=$_->[1]" } @$dict);
}
@@ -492,18 +492,8 @@ sub suggest {
#- PPC xfs module requires enlarged initrd
my $xfsroot = isThisFs("xfs", $root_part);
- require c; c::initSilo() if arch() =~ /sparc/;
-
my ($onmbr, $unsafe) = $bootloader->{crushMbr} ? (1, 0) : suggest_onmbr($hds->[0]);
- add2hash_($bootloader, arch() =~ /sparc/ ?
- {
- entries => [],
- timeout => 10,
- use_partition => 0, #- we should almost always have a whole disk partition.
- root => "/dev/$root",
- partition => $partition || 1,
- boot => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
- } : arch() =~ /ppc/ ?
+ add2hash_($bootloader, arch() =~ /ppc/ ?
{
defaultos => "linux",
entries => [],
@@ -596,22 +586,7 @@ wait for default boot.
add_kernel($bootloader, $labels{''}, '', $root,
{ label => 'failsafe', append => 'devfs=nomount failsafe' });
- if (arch() =~ /sparc/) {
- #- search for SunOS, it could be a really better approach to take into account
- #- partition type for mounting point.
- my $sunos = 0;
- foreach (@$hds) {
- foreach (@{$_->{primary}{normal}}) {
- my $path = $_->{device} =~ m|^/| && $_->{device} !~ m|^/dev/| ? $_->{device} : dev2prompath($_->{device});
- add_entry($bootloader,
- {
- type => 'other',
- kernel_or_dev => $path,
- label => "sunos" . ($sunos++ ? $sunos : ''),
- }) if $path && isSunOS($_) && type2name($_->{type}) =~ /root/i;
- }
- }
- } elsif (arch() =~ /ppc/) {
+ if (arch() =~ /ppc/) {
#- if we identified a MacOS partition earlier - add it
if (defined $partition_table::mac::macos_part) {
add_entry($bootloader,
@@ -659,12 +634,10 @@ sub detect_bootloader() {
sub method_choices {
my ($fstab, $bootloader) = @_;
my %choices = (
- if_(arch() =~ /sparc/,
- 'silo' => N("SILO"),
- ), if_(arch() !~ /sparc|ppc/ && !isLoopback(fsedit::get_root($fstab)) && whereis_binary('lilo'),
+ if_(arch() !~ /ppc/ && !isLoopback(fsedit::get_root($fstab)) && whereis_binary('lilo'),
if_(!detect_devices::matching_desc('ProSavageDDR'), 'lilo-graphic' => N("LILO with graphical menu")),
'lilo-menu' => N("LILO with text menu"),
- ), if_(arch() !~ /sparc|ppc/ && !isRAID(fsedit::get_root($fstab)) && whereis_binary('grub'),
+ ), if_(arch() !~ /ppc/ && !isRAID(fsedit::get_root($fstab)) && whereis_binary('grub'),
'grub' => N("Grub"),
), if_(arch() =~ /ppc/,
'yaboot' => N("Yaboot"),
@@ -808,80 +781,6 @@ sub install_yaboot {
run_program::rooted($::prefix, "/usr/sbin/ybin", "2>", \$error) or die "ybin failed: $error";
}
-sub install_silo {
- my ($silo, $fstab) = @_;
- my $boot = fsedit::get_root($fstab, 'boot')->{device};
- my ($wd, $_num) = $boot =~ /^(.*\D)(\d*)$/;
-
- #- setup boot promvars for.
- require c;
- if ($boot =~ /^md/) {
- #- get all mbr devices according to /boot are listed,
- #- then join all zero based partition translated to prom with ';'.
- #- keep bootdev with the first of above.
- log::l("/boot is present on raid partition which is not currently supported for promvars");
- } else {
- if (!$silo->{use_partition}) {
- foreach (@$fstab) {
- if (!$_->{start} && $_->{device} =~ /$wd/) {
- $boot = $_->{device};
- log::l("found a zero based partition in $wd as $boot");
- last;
- }
- }
- }
- $silo->{bootalias} = c::disk2PromPath($boot);
- $silo->{bootdev} = $silo->{bootalias};
- log::l("preparing promvars for device=$boot");
- }
- c::hasAliases() or log::l("clearing promvars alias as non supported"), $silo->{bootalias} = '';
-
- if ($silo->{message}) {
- eval { output("$::prefix/boot/message", $silo->{message}) } or $silo->{message} = 0;
- }
- {
- local $\ = "\n";
- my $f = "$::prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
- symlinkf "../boot/silo.conf", "$::prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
- local *F;
- open F, ">$f" or die "cannot create silo config file: $f";
- log::l("writing silo config to $f");
-
- $silo->{$_} and print F "$_=$silo->{$_}" foreach qw(partition root default append);
- $silo->{$_} and print F $_ foreach qw(restricted);
- print F "password=", $silo->{password} if $silo->{restricted} && $silo->{password}; #- also done by msec
- print F "timeout=", round(10 * $silo->{timeout}) if $silo->{timeout};
- print F "message=$silo->{boot}/message" if $silo->{message};
-
- foreach (@{$silo->{entries}}) { #-my ($v, $e) = each %{$silo->{entries}}) {
- my $type = "$_->{type}=$_->{kernel_or_dev}"; $type =~ s|/boot|$silo->{boot}|;
- print F $type;
- print F "\tlabel=$_->{label}";
-
- if ($_->{type} eq "image") {
- my $initrd = $_->{initrd}; $initrd =~ s|/boot|$silo->{boot}|;
- print F "\tpartition=$_->{partition}" if $_->{partition};
- print F "\troot=$_->{root}" if $_->{root};
- print F "\tinitrd=$initrd" if $_->{initrd};
- print F qq(\tappend="$1") if $_->{append} =~ /^\s*"?(.*?)"?\s*$/;
- print F "\tread-write" if $_->{'read-write'};
- print F "\tread-only" if !$_->{'read-write'};
- }
- }
- }
- log::l("Installing boot loader...");
- if (!$::testing) {
- my $error;
- run_program::rooted($::prefix, "silo", \$error, if_($silo->{use_partition}, "-t")) or
- run_program::rooted($::prefix, "silo", "-p", "2", if_($silo->{use_partition}, "-t")) or
- die "silo failed: $error";
-
- #- try writing in the prom.
- log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
- require c;
- c::setPromVars($silo->{bootalias}, $silo->{bootdev});
- }
-}
sub make_label_lilo_compatible {
my ($label) = @_;