summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/Xconfig/various.pm2
-rw-r--r--perl-install/bootlook.pm6
-rw-r--r--perl-install/devices.pm2
-rw-r--r--perl-install/harddrake/sound.pm2
-rw-r--r--perl-install/harddrake/v4l.pm2
-rw-r--r--perl-install/http.pm2
-rw-r--r--perl-install/install2.pm4
-rw-r--r--perl-install/install_any.pm2
-rw-r--r--perl-install/install_steps.pm4
-rw-r--r--perl-install/install_steps_interactive.pm2
-rw-r--r--perl-install/interactive.pm2
-rw-r--r--perl-install/network/adsl.pm2
-rw-r--r--perl-install/network/ethernet.pm12
-rw-r--r--perl-install/network/isdn.pm18
-rw-r--r--perl-install/network/modem.pm10
-rw-r--r--perl-install/network/netconnect.pm56
-rw-r--r--perl-install/network/network.pm4
-rw-r--r--perl-install/network/tools.pm14
-rw-r--r--perl-install/partition_table/mac.pm2
-rw-r--r--perl-install/pkgs.pm10
-rw-r--r--perl-install/printer/main.pm123
-rw-r--r--perl-install/printer/office.pm32
-rw-r--r--perl-install/printer/printerdrake.pm9
-rw-r--r--perl-install/resize_fat/main.pm4
-rwxr-xr-xperl-install/scanner.pm4
-rw-r--r--perl-install/steps.pm2
-rw-r--r--perl-install/ugtk.pm2
27 files changed, 166 insertions, 168 deletions
diff --git a/perl-install/Xconfig/various.pm b/perl-install/Xconfig/various.pm
index 85b90bba0..f02c56c21 100644
--- a/perl-install/Xconfig/various.pm
+++ b/perl-install/Xconfig/various.pm
@@ -32,7 +32,7 @@ sub info {
$info .= N("Monitor: %s\n", $monitor->{ModelName});
$info .= N("Monitor HorizSync: %s\n", $monitor->{HorizSync}) if $::expert;
$info .= N("Monitor VertRefresh: %s\n", $monitor->{VertRefresh}) if $::expert;
- $info .= N("Graphics card: %s\n", $device->{VendorName} . ' '. $device->{BoardName});
+ $info .= N("Graphics card: %s\n", $device->{VendorName} . ' ' . $device->{BoardName});
$info .= N("Graphics memory: %s kB\n", $device->{VideoRam}) if $device->{VideoRam};
if (my $resolution = eval { $raw_X->get_resolution }) {
$info .= N("Color depth: %s\n", translate($Xconfig::resolution_and_depth::depth2text{$resolution->{Depth}}));
diff --git a/perl-install/bootlook.pm b/perl-install/bootlook.pm
index 5a73684bb..2eba6b460 100644
--- a/perl-install/bootlook.pm
+++ b/perl-install/bootlook.pm
@@ -85,7 +85,7 @@ my $menubar = ugtk::create_factory_menu($window, @menu_items);
my $user_combo = new Gtk::Combo;
$user_combo->set_popdown_strings(@usernames);
$user_combo->entry->set_text($auto_mode{autologin}) if $auto_mode{autologin};
-my $desktop_combo =new Gtk::Combo;
+my $desktop_combo = new Gtk::Combo;
$desktop_combo->set_popdown_strings(get_wm());
$desktop_combo->entry->set_text($auto_mode{desktop}) if $auto_mode{desktop};
my $a_c_button = new Gtk::RadioButton (N("NewStyle Categorizing Monitor"));
@@ -362,7 +362,7 @@ $window->show_all();
$no_bootsplash and $thm_frame->hide();
Gtk->main_iteration while Gtk->events_pending;
$::isEmbedded and kill 'USR2', $::CCPID;
-$inmain=1;
+$inmain = 1;
Gtk->main;
Gtk->exit(0);
@@ -472,7 +472,7 @@ sub get_autologin {
}
sub updateAutologin {
- my ($usern,$deskt)=($user_combo->entry->get_text(), $desktop_combo->entry->get_text());
+ my ($usern,$deskt) = ($user_combo->entry->get_text(), $desktop_combo->entry->get_text());
if ($x_yes_button->get_active()) {
$in->do_pkgs->install('autologin') if $x_mode;
set_autologin('',$usern,$deskt);
diff --git a/perl-install/devices.pm b/perl-install/devices.pm
index 6ce3a7e86..32c52904c 100644
--- a/perl-install/devices.pm
+++ b/perl-install/devices.pm
@@ -123,7 +123,7 @@ sub entry {
"scd" => [ c::S_IFBLK(), 11, 0 ],
"ttyS" => [ c::S_IFCHR(), 4, 64 ],
"ubd/" => [ c::S_IFBLK(), 98, 0 ],
- }}{$1}};
+ }}{$1} };
$minor += $2;
}
unless ($type) {
diff --git a/perl-install/harddrake/sound.pm b/perl-install/harddrake/sound.pm
index 5b85116c8..267edd1de 100644
--- a/perl-install/harddrake/sound.pm
+++ b/perl-install/harddrake/sound.pm
@@ -175,7 +175,7 @@ sub switch {
[
{ label => N("Driver:"), val => \$new_driver, list => $alternative, default => $new_driver, sort =>1, format => sub {
my %des = modules::category2modules_and_description('multimedia/sound');
- "$_[0] (". $des{$_[0]} . ')'
+ "$_[0] (" . $des{$_[0]} . ')'
}, allow_empty_list => 1 },
{
val => N("Help"), disabled => sub {},
diff --git a/perl-install/harddrake/v4l.pm b/perl-install/harddrake/v4l.pm
index ce944adcb..ee6b488ae 100644
--- a/perl-install/harddrake/v4l.pm
+++ b/perl-install/harddrake/v4l.pm
@@ -221,7 +221,7 @@ If your card is misdetected, you can force the right tuner and card types here.
$conf{card} = $cards_lst->{$driver}{$conf{card}};
my $options =
- 'radio=' . ($conf{radio} ? 1 : 0) . ' '.
+ 'radio=' . ($conf{radio} ? 1 : 0) . ' ' .
join(' ', map { if_($conf{$_} ne -1, "$_=$conf{$_}") } qw(card pll tuner gbuffers));
if ($options) {
log::l("[harddrake::bttv] $options");
diff --git a/perl-install/http.pm b/perl-install/http.pm
index ad05b761e..34158f7bd 100644
--- a/perl-install/http.pm
+++ b/perl-install/http.pm
@@ -7,7 +7,7 @@ use network;
my $sock;
sub getFile {
- local($^W) = 0;
+ local ($^W) = 0;
my ($url) = @_;
$sock->close if $sock;
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index 92112f8b8..e8084e8ae 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -466,7 +466,7 @@ sub main {
$o->{intf} ||= { $l->{DEVICE} => $l };
}
if (-e '/etc/resolv.conf') {
- my $file ='/etc/resolv.conf';
+ my $file = '/etc/resolv.conf';
log::l("found network config file $file");
add2hash($o->{netc}, network::read_resolv_conf($file));
}
@@ -618,7 +618,7 @@ sub main {
#- to ensure linuxconf doesn't cry against those files being in the future
foreach ('/etc/modules.conf', '/etc/crontab', '/etc/sysconfig/mouse', '/etc/sysconfig/network', '/etc/X11/fs/config') {
- my $now = time - 24 * 60 * 60;
+ my $now = time() - 24 * 60 * 60;
utime $now, $now, "$o->{prefix}/$_";
}
$::live or install_any::killCardServices();
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index a0431067b..8e94b6bbe 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -689,7 +689,7 @@ sub kdeicons_postinstall {
template2userfile($prefix,
"$ENV{SHARE_PATH}/$name.kdelnk.in",
- "Desktop/$text" . ($nb && " $nb"). ".kdelnk",
+ "Desktop/$text" . ($nb && " $nb") . ".kdelnk",
1, %$_) if $name;
}
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index 20921da72..738cb5290 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -362,12 +362,12 @@ sub installPackages($$) { #- complete REWORK, TODO and TOCHECK!
#- small transaction will be built based on this selection and depslist.
my @toInstall = pkgs::packagesToInstall($packages);
- my $time = time;
+ my $time = time();
$ENV{DURING_INSTALL} = 1;
pkgs::install($o->{prefix}, $o->{isUpgrade}, \@toInstall, $packages);
delete $ENV{DURING_INSTALL};
run_program::rooted_or_die($o->{prefix}, 'ldconfig') unless $::g_auto_install;
- log::l("Install took: ", formatTimeRaw(time - $time));
+ log::l("Install took: ", formatTimeRaw(time() - $time));
install_any::log_sizes($o);
scalar(@toInstall); #- return number of packages installed.
}
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 299b81ec3..8490e72f3 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -218,7 +218,7 @@ sub selectKeyboard {
messages => N("Please choose your keyboard layout."),
advanced_messages => N("Here is the full list of keyboards available"),
advanced_label => N("More"),
- callbacks => { changed => sub { $other = $_[0]==1 } },
+ callbacks => { changed => sub { $other = $_[0] == 1 } },
},
[ if_(@best > 1, { val => \$KEYBOARD, type => 'list', format => $format, sort => 1,
list => [ @best ] }),
diff --git a/perl-install/interactive.pm b/perl-install/interactive.pm
index b18b3223d..076b11f7d 100644
--- a/perl-install/interactive.pm
+++ b/perl-install/interactive.pm
@@ -123,7 +123,7 @@ sub exit { exit($_[0]) }
#-######################################################################################
sub ask_warn {
my ($o, $title, $message) = @_;
- local $::isWizard=0;
+ local $::isWizard = 0;
ask_from_listf_no_check($o, $title, $message, undef, [ N("Ok") ]);
}
diff --git a/perl-install/network/adsl.pm b/perl-install/network/adsl.pm
index b5eea7742..a8f51e2e3 100644
--- a/perl-install/network/adsl.pm
+++ b/perl-install/network/adsl.pm
@@ -212,7 +212,7 @@ LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C /usr/sbin/adsl-start $netc->{NET_DEVICE
echo 'not yet implemented, still beta software'
", $netc->{adsltype}) }
- $netc->{NET_INTERFACE}='ppp0';
+ $netc->{NET_INTERFACE} = 'ppp0';
}
1;
diff --git a/perl-install/network/ethernet.pm b/perl-install/network/ethernet.pm
index 3754cfd4a..bda415549 100644
--- a/perl-install/network/ethernet.pm
+++ b/perl-install/network/ethernet.pm
@@ -16,7 +16,7 @@ use MDK::Common::Globals "network", qw($in $prefix);
sub configure_cable {
my ($netcnx, $netc, $intf, $first_time) = @_;
$::isInstall and $in->set_help('configureNetworkCable');
- $netcnx->{type}='cable';
+ $netcnx->{type} = 'cable';
# $netcnx->{cable}={};
# $in->ask_from_entries_ref(N("Cable connection"),
# N("Please enter your host name if you know it.
@@ -38,9 +38,9 @@ sub configure_cable {
Default is dhcpcd"),
sub { $_[0]{description} },
\@m)) {
- $f->{c}==1 and $netcnx->{dhcp_client}="dhcpcd" and $in->do_pkgs->install(qw(dhcpcd));
- $f->{c}==3 and $netcnx->{dhcp_client}="dhcpxd" and $in->do_pkgs->install(qw(dhcpxd));
- $f->{c}==4 and $netcnx->{dhcp_client}="dhcp-client" and $in->do_pkgs->install(qw(dhcp-client));
+ $f->{c} == 1 and $netcnx->{dhcp_client} = "dhcpcd" and $in->do_pkgs->install(qw(dhcpcd));
+ $f->{c} == 3 and $netcnx->{dhcp_client} = "dhcpxd" and $in->do_pkgs->install(qw(dhcpxd));
+ $f->{c} == 4 and $netcnx->{dhcp_client} = "dhcp-client" and $in->do_pkgs->install(qw(dhcp-client));
}
} else {
$in->do_pkgs->install(qw(dhcpcd));
@@ -63,7 +63,7 @@ sub configure_lan {
configureNetwork2($in, $prefix, $netc, $intf);
$netc->{NETWORKING} = "yes";
if ($netc->{GATEWAY} || grep { $_->{BOOTPROTO} eq 'dhcp' } values %$intf) {
- $netcnx->{type}='lan';
+ $netcnx->{type} = 'lan';
$netcnx->{NET_DEVICE} = $netc->{NET_DEVICE} = '';
$netcnx->{NET_INTERFACE} = 'lan'; #$netc->{NET_INTERFACE};
write_cnx_script($netc, "local network",
@@ -162,7 +162,7 @@ sub conf_network_card_backend {
sub go_ethernet {
my ($netc, $intf, $type, $ipadr, $netadr, $first_time) = @_;
conf_network_card($netc, $intf, $type, $ipadr, $netadr) or return;
- $netc->{NET_INTERFACE}=$netc->{NET_DEVICE};
+ $netc->{NET_INTERFACE} = $netc->{NET_DEVICE};
configureNetwork($netc, $intf, $first_time) or return;
# if ( $::isStandalone and $netc->{NET_DEVICE}) {
# $in->ask_yesorno(N("Network interface"),
diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm
index 8e1c00261..e6997351e 100644
--- a/perl-install/network/isdn.pm
+++ b/perl-install/network/isdn.pm
@@ -23,15 +23,15 @@ sub configure {
) or return;
if ($e =~ /card/) {
intern_pci:
- $netc->{isdntype}='isdn_internal';
- $netcnx->{isdn_internal}={};
+ $netc->{isdntype} = 'isdn_internal';
+ $netcnx->{isdn_internal} = {};
$netcnx->{isdn_internal}{$_} = $netc->{autodetect}{isdn}{$_} foreach 'description', 'vendor', 'id', 'driver', 'card_type', 'type';
isdn_detect($netcnx->{isdn_internal}, $netc) or return;
} else {
- $netc->{isdntype}='isdn_external';
- $netcnx->{isdn_external}={};
- $netcnx->{isdn_external}{device}=$netc->{autodetect}{modem};
- $netcnx->{isdn_external}{special_command}='AT&F&O2B40';
+ $netc->{isdntype} = 'isdn_external';
+ $netcnx->{isdn_external} = {};
+ $netcnx->{isdn_external}{device} = $netc->{autodetect}{modem};
+ $netcnx->{isdn_external}{special_command} = 'AT&F&O2B40';
require network::modem;
network::modem::pppConfig($netcnx->{isdn_external}, $mouse, $netc) or goto isdn_step_1;
}
@@ -76,7 +76,7 @@ sub isdn_write_config_backend {
} else {
my $a = "";
defined $isdn->{$_} and $a .= "$_=" . $isdn->{$_} . " " foreach qw(type protocol mem io io0 io1 irq);
- $isdn->{driver} eq "hisax" and $a.="id=HiSax";
+ $isdn->{driver} eq "hisax" and $a .= "id=HiSax";
modules::set_options($isdn->{driver}, $a);
}
modules::add_alias("ippp0", $isdn->{driver});
@@ -243,7 +243,7 @@ sub isdn_detect {
isdn_ask($isdn, $netc, N("I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.")) or return;
} else {
isdn_detect_step_1:
- $isdn->{protocol}=isdn_ask_protocol() or return;
+ $isdn->{protocol} = isdn_ask_protocol() or return;
isdn_detect_step_2:
isdn_ask_info($isdn, $netc) or goto isdn_detect_step_1;
isdn_write_config($isdn, $netc) or goto isdn_detect_step_2;
@@ -251,7 +251,7 @@ sub isdn_detect {
} else {
isdn_ask($isdn, $netc, N("No ISDN PCI card found. Please select one on the next screen.")) or return;
}
- $netc->{$_}='ippp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
+ $netc->{$_} = 'ippp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
1;
}
diff --git a/perl-install/network/modem.pm b/perl-install/network/modem.pm
index 1003cc637..a6eabf170 100644
--- a/perl-install/network/modem.pm
+++ b/perl-install/network/modem.pm
@@ -14,9 +14,9 @@ use MDK::Common::Globals "network", qw($in $prefix);
sub configure {
my ($netcnx, $mouse, $netc) = @_;
- $netcnx->{type}='modem';
- $netcnx->{$netcnx->{type}}={};
- $netcnx->{modem}{device}=$netc->{autodetect}{modem};
+ $netcnx->{type} = 'modem';
+ $netcnx->{$netcnx->{type}} = {};
+ $netcnx->{modem}{device} = $netc->{autodetect}{modem};
modem_step_1:
pppConfig($netcnx->{$netcnx->{type}}, $mouse, $netc) or return;
write_cnx_script($netc, "modem",
@@ -33,7 +33,7 @@ killall pppd
sub pppConfig {
my ($modem, $mouse, $netc) = @_;
- $mouse ||={};
+ $mouse ||= {};
$mouse->{device} ||= readlink "$prefix/dev/mouse";
$::isInstall and $in->set_help('selectSerialPort');
$modem->{device} ||= $in->ask_from_listf('', N("Please choose which serial port your modem is connected to."),
@@ -53,7 +53,7 @@ sub pppConfig {
]) or return;
$netc->{DOMAINNAME2} = $modem->{domain};
any::pppConfig($in, $modem, $prefix);
- $netc->{$_}='ppp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
+ $netc->{$_} = 'ppp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
1;
}
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
index c91e39672..007dfbe30 100644
--- a/perl-install/network/netconnect.pm
+++ b/perl-install/network/netconnect.pm
@@ -46,10 +46,10 @@ sub intro {
translate($text),
sub { $_[0]{description} },
\@l);
- run_program::rooted($prefix, $connect_prog) if $e->{c}==1;
- run_program::rooted($prefix, $disconnect_file) if $e->{c}==2;
- main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0) if $e->{c}==3;
- $in->exit(0) if $e->{c}==4;
+ run_program::rooted($prefix, $connect_prog) if $e->{c} == 1;
+ run_program::rooted($prefix, $disconnect_file) if $e->{c} == 2;
+ main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0) if $e->{c} == 3;
+ $in->exit(0) if $e->{c} == 4;
} else {
main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0);
}
@@ -123,11 +123,11 @@ sub init_globals {
sub main {
my ($prefix, $netcnx, $netc, $mouse, $in, $intf, $first_time, $direct_fr, $noauto) = @_;
init_globals ($in, $prefix);
- $netc->{minus_one}=0; #When one configure an eth in dhcp without gateway
+ $netc->{minus_one} = 0; #When one configure an eth in dhcp without gateway
$::isInstall and $in->set_help('configureNetwork');
$::isStandalone and read_net_conf($prefix, $netcnx, $netc); # REDONDANCE with intro. FIXME
- $netc->{NET_DEVICE}=$netcnx->{NET_DEVICE} if $netcnx->{NET_DEVICE}; # REDONDANCE with read_conf. FIXME
- $netc->{NET_INTERFACE}=$netcnx->{NET_INTERFACE} if $netcnx->{NET_INTERFACE}; # REDONDANCE with read_conf. FIXME
+ $netc->{NET_DEVICE} = $netcnx->{NET_DEVICE} if $netcnx->{NET_DEVICE}; # REDONDANCE with read_conf. FIXME
+ $netc->{NET_INTERFACE} = $netcnx->{NET_INTERFACE} if $netcnx->{NET_INTERFACE}; # REDONDANCE with read_conf. FIXME
network::read_all_conf($prefix, $netc ||= {}, $intf ||= {});
modules::mergein_conf("$prefix/etc/modules.conf");
@@ -138,7 +138,7 @@ sub main {
N("Because you are doing a network installation, your network is already configured.
Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
"), 1)) and do {
- $netcnx->{type}='lan';
+ $netcnx->{type} = 'lan';
output "$prefix$connect_file",
qq(
ifup eth0
@@ -154,11 +154,11 @@ ifdown eth0
};
}
- $netc->{autodetection}=1;
- $netc->{autodetect}={};
+ $netc->{autodetection} = 1;
+ $netc->{autodetect} = {};
step_1:
- $::Wizard_no_previous=1;
+ $::Wizard_no_previous = 1;
my @profiles = get_profiles();
$in->ask_from(N("Network Configuration Wizard"),
N("Welcome to The Network Configuration Wizard.
@@ -272,8 +272,8 @@ N("After this is done, we recommend that you restart your X environment to avoid
N("Problems occured during configuration.
Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.");
if ($::isWizard) {
- $::Wizard_no_previous=1;
- $::Wizard_finished=1;
+ $::Wizard_no_previous = 1;
+ $::Wizard_finished = 1;
$in->ask_okcancel(N("Network Configuration"), $m, 1);
undef $::Wizard_no_previous;
undef $::Wizard_finished;
@@ -327,7 +327,7 @@ fi
);
}
chmod 0755, "$prefix$connect_prog";
- $netcnx->{$_}=$netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
+ $netcnx->{$_} = $netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
$netcnx->{NET_INTERFACE} and set_net_conf($netcnx, $netc);
$netcnx->{type} =~ /adsl/ or system("/sbin/chkconfig --del adsl 2> /dev/null");
@@ -354,7 +354,7 @@ fi
}
sub save_conf {
- my ($netcnx, $netc, $intf)=@_;
+ my ($netcnx, $netc, $intf) = @_;
my $adsl;
my $modem;
my $isdn;
@@ -471,7 +471,7 @@ sub set_profile {
$profile or return;
my $f = "$prefix/etc/sysconfig/network-scripts/drakconnect_conf";
-e ($f . "." . $profile) or return;
- $netcnx->{PROFILE}=$profile;
+ $netcnx->{PROFILE} = $profile;
cp_af($f . "." . $profile, $f);
foreach (["$prefix$connect_file", "up"],
["$prefix$disconnect_file", "down"],
@@ -511,7 +511,7 @@ sub get_profiles {
}
sub load_conf {
- my ($netcnx, $netc, $intf)=@_;
+ my ($netcnx, $netc, $intf) = @_;
my $adsl_pptp = {};
my $adsl_pppoe = {};
my $modem = {};
@@ -574,14 +574,14 @@ sub load_conf {
/^DOMAINNAME2=(.*)$/ and $netc->{DOMAINNAME2} = $1;
}
}
- $system_name && $domain_name and $netc->{HOSTNAME}=join ('.', $system_name, $domain_name);
- $adsl_pptp->{$_}=$adsl_pppoe->{$_} foreach 'login', 'passwd', 'passwd2';
- $isdn_external->{$_}=$modem->{$_} foreach 'device', 'connection', 'phone', 'domain', 'dns1', 'dns2', 'login', 'passwd', 'auth';
- $netcnx->{adsl_pptp}=$adsl_pptp;
- $netcnx->{adsl_pppoe}=$adsl_pppoe;
- $netcnx->{modem}=$modem;
- $netcnx->{modem}=$isdn_external;
- $netcnx->{isdn_internal}=$isdn;
+ $system_name && $domain_name and $netc->{HOSTNAME} = join ('.', $system_name, $domain_name);
+ $adsl_pptp->{$_} = $adsl_pppoe->{$_} foreach 'login', 'passwd', 'passwd2';
+ $isdn_external->{$_} = $modem->{$_} foreach 'device', 'connection', 'phone', 'domain', 'dns1', 'dns2', 'login', 'passwd', 'auth';
+ $netcnx->{adsl_pptp} = $adsl_pptp;
+ $netcnx->{adsl_pppoe} = $adsl_pppoe;
+ $netcnx->{modem} = $modem;
+ $netcnx->{modem} = $isdn_external;
+ $netcnx->{isdn_internal} = $isdn;
-e "$prefix/etc/sysconfig/network" and put_in_hash($netc, network::read_conf("$prefix/etc/sysconfig/network"));
foreach (glob_("$prefix/etc/sysconfig/ifcfg-*")) {
my $l = network::read_interface_conf($_);
@@ -607,15 +607,15 @@ sub get_net_device {
}
sub read_net_conf {
- my ($prefix, $netcnx, $netc)=@_;
+ my ($prefix, $netcnx, $netc) = @_;
add2hash($netcnx, { read_raw_net_conf('_conf') });
$netc->{$_} = $netcnx->{$_} foreach 'NET_DEVICE', 'NET_INTERFACE';
- $netcnx->{$netcnx->{type}}||={};
+ $netcnx->{$netcnx->{type}} ||= {};
add2hash($netcnx->{$netcnx->{type}}, { read_raw_net_conf($netcnx->{type}) });
}
sub set_net_conf {
- my ($netcnx, $netc)=@_;
+ my ($netcnx, $netc) = @_;
setVarsInShMode("$prefix/etc/sysconfig/drakconnect", 0600, $netcnx, "NET_DEVICE", "NET_INTERFACE", "type", "PROFILE");
setVarsInShMode("$prefix/etc/sysconfig/drakconnect." . $netcnx->{type}, 0600, $netcnx->{$netcnx->{type}}); #- doesn't work, don't know why
setVarsInShMode("$prefix/etc/sysconfig/drakconnect.netc", 0600, $netc); #- doesn't work, don't know why
diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm
index 3c4a75895..79884887a 100644
--- a/perl-install/network/network.pm
+++ b/perl-install/network/network.pm
@@ -269,7 +269,7 @@ sub configureNetworkIntf {
my @wireless_modules = qw(aironet_cs aironet4500_cs hermes airo orinoco_cs orinoco airo_cs netwave_cs ray_cs wavelan_cs wvlan_cs airport);
my $flag = 0;
foreach (@wireless_modules) {
- $module =~ /$_/ and $flag =1;
+ $module =~ /$_/ and $flag = 1;
}
if ($flag) {
$intf->{wireless_eth} = 1;
@@ -305,7 +305,7 @@ notation (for example, 1.2.3.4).");
my @fields = qw(IPADDR NETMASK);
$::isStandalone or $in->set_help('configureNetworkIP');
$in->ask_from(N("Configuring network device %s", $intf->{DEVICE}),
- (N("Configuring network device %s", $intf->{DEVICE}) . ($module ? N(" (driver %s)", $module) : '') ."\n\n") .
+ (N("Configuring network device %s", $intf->{DEVICE}) . ($module ? N(" (driver %s)", $module) : '') . "\n\n") .
$text,
[ { label => N("IP address"), val => \$intf->{IPADDR}, disabled => sub { $pump } },
{ label => N("Netmask"), val => \$intf->{NETMASK}, disabled => sub { $pump } },
diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm
index c7f337da4..88cacba9d 100644
--- a/perl-install/network/tools.pm
+++ b/perl-install/network/tools.pm
@@ -14,7 +14,7 @@ use MDK::Common::System qw(getVarsFromSh);
sub write_cnx_script {
my ($netc, $type, $up, $down, $type2) = @_;
if ($type) {
- $netc->{internet_cnx}{$type}{$_->[0]}=$_->[1] foreach [$connect_file, $up], [$disconnect_file, $down];
+ $netc->{internet_cnx}{$type}{$_->[0]} = $_->[1] foreach [$connect_file, $up], [$disconnect_file, $down];
$netc->{internet_cnx}{$type}{type} = $type2;
} else {
foreach ($connect_file, $disconnect_file) {
@@ -36,7 +36,7 @@ sub write_secret_backend {
sub ask_connect_now {
my ($type) = @_;
- $::Wizard_no_previous=1;
+ $::Wizard_no_previous = 1;
#- FIXME : code the exception to be generated by ask_yesorno, to be able to remove the $::Wizard_no_previous=1;
if ($in->ask_yesorno(N("Internet configuration"),
N("Do you want to try to connect to the Internet now?")
@@ -58,8 +58,8 @@ sub ask_connect_now {
N("The system doesn't seem to be connected to internet.
Try to reconfigure your connection.");
if ($::isWizard) {
- $::Wizard_no_previous=1;
- $::Wizard_finished=1;
+ $::Wizard_no_previous = 1;
+ $::Wizard_finished = 1;
$in->ask_okcancel(N("Network Configuration"), $m, 1);
undef $::Wizard_no_previous;
undef $::Wizard_finished;
@@ -128,7 +128,7 @@ sub detect_timezone {
sub type2interface {
my ($i) = @_;
- $i=~/$_->[0]/ and return $_->[1] foreach [ modem => 'ppp'],
+ $i =~ /$_->[0]/ and return $_->[1] foreach [ modem => 'ppp'],
[ isdn_internal => 'ippp'],
[ isdn_external => 'ppp'],
[ adsl => 'ppp'],
@@ -140,7 +140,7 @@ sub connected { gethostbyname("mandrakesoft.com") ? 1 : 0 }
my $kid_pipe;
sub connected_bg {
- local $|=1;
+ local $| = 1;
my ($ref) = @_;
if (defined $kid_pipe) {
local *F;
@@ -169,7 +169,7 @@ my $kid_pid;
my $current_connection_status;
sub test_connected {
- local $|=1;
+ local $| = 1;
my ($cmd) = @_;
if (!defined $current_connection_status) { $current_connection_status = -1 }
diff --git a/perl-install/partition_table/mac.pm b/perl-install/partition_table/mac.pm
index 131dcb72f..7fd442d8f 100644
--- a/perl-install/partition_table/mac.pm
+++ b/perl-install/partition_table/mac.pm
@@ -128,7 +128,7 @@ sub read($$) {
c::lseek_sector(fileno(F), $sector, 512) or die "reading of partition in sector $sector failed";
my @pt;
- for (my $i=0;$i<$partmapsize;$i++) {
+ for (my $i = 0;$i < $partmapsize;$i++) {
my $part;
sysread F, $part, psizeof($p_format) or die "error while reading partition info in sector $sector";
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
index aae42dfbd..21d03a920 100644
--- a/perl-install/pkgs.pm
+++ b/perl-install/pkgs.pm
@@ -81,7 +81,7 @@ sub extractHeaders {
}
foreach (@$pkgs) {
- my $f = "$prefix/tmp/headers/". $_->header_filename;
+ my $f = "$prefix/tmp/headers/" . $_->header_filename;
$_->update_header($f) or log::l("unable to open header file $f"), next;
log::l("read header file $f");
}
@@ -190,7 +190,7 @@ sub packagesToInstall {
log::l("examining packagesToInstall of medium $_->{descr}");
push @packages, grep { $_->flag_selected } packagesOfMedium($packages, $_);
}
- log::l("found " .scalar(@packages). " packages to install");
+ log::l("found " . scalar(@packages) . " packages to install");
@packages;
}
@@ -749,7 +749,7 @@ sub rpmDbOpen {
my $rebuilddb_dir = "$prefix/var/lib/rpmrebuilddb.$$";
-d $rebuilddb_dir and log::l("removing stale directory $rebuilddb_dir"), rm_rf($rebuilddb_dir);
- URPM::DB::rebuild($prefix) or log::l("rebuilding of rpm database failed: ". c::rpmErrorString()), c::_exit(2);
+ URPM::DB::rebuild($prefix) or log::l("rebuilding of rpm database failed: " . c::rpmErrorString()), c::_exit(2);
c::_exit(0);
}
@@ -988,7 +988,7 @@ sub install($$$;$$) {
log::l("opened rpm database for retry transaction of 1 package only");
$trans->add($retry_pkg, $isUpgrade && allowedToUpgrade($retry_pkg->name));
} else {
- log::l("opened rpm database for transaction of ". scalar @transToInstall .
+ log::l("opened rpm database for transaction of " . scalar @transToInstall .
" new packages, still $nb after that to do");
$trans->add($_, $isUpgrade && allowedToUpgrade($_->name))
foreach @transToInstall;
@@ -1073,7 +1073,7 @@ sub install($$$;$$) {
log::l("retrying installing package ".$retry_pkg->fullname." alone in a transaction");
--$retry_count;
} else {
- log::l("bad package ". $retry_pkg->fullname ." unable to be installed");
+ log::l("bad package " . $retry_pkg->fullname . " unable to be installed");
$retry_pkg->set_flag_requested(0);
$retry_pkg->set_flag_required(0);
#- keep name to display (problem of displaying ?).
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
index b9e536d61..06329bdfc 100644
--- a/perl-install/printer/main.pm
+++ b/perl-install/printer/main.pm
@@ -191,7 +191,7 @@ sub getinfo($) {
my $printer = {};
my @QUEUES;
- $::prefix=$prefix;
+ $::prefix = $prefix;
# Initialize $printer data structure
resetinfo($printer);
@@ -1007,8 +1007,7 @@ sub configure_queue($) {
$useUSB ||= $_->{queuedata}{connect} =~ /usb/ ||
$_->{DeviceURI} =~ /usb/;
}
- $useUSB ||= ($printer->{currentqueue}{queue}{queuedata}{connect}
- =~ /usb/);
+ $useUSB ||= ($printer->{currentqueue}{queue}{queuedata}{connect} =~ /usb/);
if ($useUSB) {
my $f = "$prefix/etc/sysconfig/usb";
my %usb = getVarsFromSh($f);
@@ -1462,38 +1461,38 @@ sub configure_hpoj {
$_ = `date`;
chomp;
print CONFIG
- "# Added $_ by \"printerdrake\".\n".
- "\n".
- "# The basic format for this file is \"key[+]=value\".\n".
- "# If you say \"+=\" instead of \"=\", then the value is appended to any\n".
- "# value already defined for this key, rather than replacing it.\n".
- "\n".
- "# Comments must start at the beginning of the line. Otherwise, they may\n".
- "# be interpreted as being part of the value.\n".
- "\n".
- "# If you have multiple devices and want to define options that apply to\n".
- "# all of them, then put them in the file /etc/ptal/defaults, which is read\n".
- "# in before this file.\n".
- "\n".
- "# The format version of this file:\n".
- "# ptal-init ignores devices with incorrect/missing versions.\n".
+ "# Added $_ by \"printerdrake\".\n" .
+ "\n" .
+ "# The basic format for this file is \"key[+]=value\".\n" .
+ "# If you say \"+=\" instead of \"=\", then the value is appended to any\n" .
+ "# value already defined for this key, rather than replacing it.\n" .
+ "\n" .
+ "# Comments must start at the beginning of the line. Otherwise, they may\n" .
+ "# be interpreted as being part of the value.\n" .
+ "\n" .
+ "# If you have multiple devices and want to define options that apply to\n" .
+ "# all of them, then put them in the file /etc/ptal/defaults, which is read\n" .
+ "# in before this file.\n" .
+ "\n" .
+ "# The format version of this file:\n" .
+ "# ptal-init ignores devices with incorrect/missing versions.\n" .
"init.version=1\n";
# Write model string.
if ($model_long !~ /\S/) {
print CONFIG
- "\n".
- "# \"printerdrake\" couldn't read the model but added this device anyway:\n".
+ "\n" .
+ "# \"printerdrake\" couldn't read the model but added this device anyway:\n" .
"# ";
} else {
print CONFIG
- "\n".
- "# The device model that was originally detected on this port:\n".
- "# If this ever changes, then you should re-run \"printerdrake\"\n".
+ "\n" .
+ "# The device model that was originally detected on this port:\n" .
+ "# If this ever changes, then you should re-run \"printerdrake\"\n" .
"# to delete and re-configure this device.\n";
if ($bus eq "par") {
print CONFIG
- "# Comment out if you don't care what model is really connected to this\n".
+ "# Comment out if you don't care what model is really connected to this\n" .
"# parallel port.\n";
}
}
@@ -1501,16 +1500,16 @@ sub configure_hpoj {
"init.mlcd.append+=-devidmatch \"$model_long\"\n";
# Write serial-number string.
- if ($serialnumber_long!~/\S/) {
+ if ($serialnumber_long !~ /\S/) {
print CONFIG
- "\n".
- "# The device's serial number is unknown.\n".
+ "\n" .
+ "# The device's serial number is unknown.\n" .
"# ";
} else {
print CONFIG
- "\n".
+ "\n" .
"# The serial number of the device that was originally detected on this port:\n";
- if ($bus=~/^[pu]/) {
+ if ($bus =~ /^[pu]/) {
print CONFIG
"# Comment out if you want to disable serial-number matching.\n";
}
@@ -1518,10 +1517,10 @@ sub configure_hpoj {
print CONFIG
"init.mlcd.append+=-devidmatch \"$serialnumber_long\"\n";
- if ($bus=~/^[pu]/) {
+ if ($bus =~ /^[pu]/) {
print CONFIG
- "\n".
- "# Standard options passed to ptal-mlcd:\n".
+ "\n" .
+ "# Standard options passed to ptal-mlcd:\n" .
"init.mlcd.append+=";
if ($bus eq "usb") {
# Important: don't put more quotes around /dev/usb/lp[0-9]*,
@@ -1530,46 +1529,46 @@ sub configure_hpoj {
} elsif ($bus eq "par") {
print CONFIG "$address_arg -device $device";
}
- print CONFIG "\n".
- "\n".
- "# ptal-mlcd's remote console can be useful for debugging, but may be a\n".
- "# security/DoS risk otherwise. In any case, it's accessible with the\n".
- "# command \"ptal-connect mlc:<XXX>:<YYY> -service PTAL-MLCD-CONSOLE\".\n".
- "# Uncomment the following line if you want to enable this feature for\n".
- "# this device:\n".
- "# init.mlcd.append+=-remconsole\n".
- "\n".
- "# If you need to pass any other command-line options to ptal-mlcd, then\n".
- "# add them to the following line and uncomment the line:\n".
- "# init.mlcd.append+=\n".
- "\n".
- "# By default ptal-printd is started for mlc: devices. If you use CUPS,\n".
- "# then you may not be able to use ptal-printd, and you can uncomment the\n".
- "# following line to disable ptal-printd for this device:\n".
+ print CONFIG "\n" .
+ "\n" .
+ "# ptal-mlcd's remote console can be useful for debugging, but may be a\n" .
+ "# security/DoS risk otherwise. In any case, it's accessible with the\n" .
+ "# command \"ptal-connect mlc:<XXX>:<YYY> -service PTAL-MLCD-CONSOLE\".\n" .
+ "# Uncomment the following line if you want to enable this feature for\n" .
+ "# this device:\n" .
+ "# init.mlcd.append+=-remconsole\n" .
+ "\n" .
+ "# If you need to pass any other command-line options to ptal-mlcd, then\n" .
+ "# add them to the following line and uncomment the line:\n" .
+ "# init.mlcd.append+=\n" .
+ "\n" .
+ "# By default ptal-printd is started for mlc: devices. If you use CUPS,\n" .
+ "# then you may not be able to use ptal-printd, and you can uncomment the\n" .
+ "# following line to disable ptal-printd for this device:\n" .
"# init.printd.start=0\n";
} else {
print CONFIG
- "\n".
- "# By default ptal-printd isn't started for hpjd: devices.\n".
- "# If for some reason you want to start it for this device, then\n".
- "# uncomment the following line:\n".
+ "\n" .
+ "# By default ptal-printd isn't started for hpjd: devices.\n" .
+ "# If for some reason you want to start it for this device, then\n" .
+ "# uncomment the following line:\n" .
"init.printd.start=1\n";
}
print CONFIG
- "\n".
- "# If you need to pass any additional command-line options to ptal-printd,\n".
- "# then add them to the following line and uncomment the line:\n".
+ "\n" .
+ "# If you need to pass any additional command-line options to ptal-printd,\n" .
+ "# then add them to the following line and uncomment the line:\n" .
"# init.printd.append+=\n";
if ($cardreader) {
print CONFIG
- "\n".
- "# Uncomment the following line to enable ptal-photod for this device:\n".
- "init.photod.start=1\n".
- "\n".
- "# If you have more than one photo-card-capable peripheral and you want to\n".
- "# assign particular TCP port numbers and mtools drive letters to each one,\n".
- "# then change the line below to use the \"-portoffset <n>\" option.\n".
+ "\n" .
+ "# Uncomment the following line to enable ptal-photod for this device:\n" .
+ "init.photod.start=1\n" .
+ "\n" .
+ "# If you have more than one photo-card-capable peripheral and you want to\n" .
+ "# assign particular TCP port numbers and mtools drive letters to each one,\n" .
+ "# then change the line below to use the \"-portoffset <n>\" option.\n" .
"init.photod.append+=-maxaltports 26\n";
}
close(CONFIG);
diff --git a/perl-install/printer/office.pm b/perl-install/printer/office.pm
index 01f1476da..ce00489a5 100644
--- a/perl-install/printer/office.pm
+++ b/perl-install/printer/office.pm
@@ -97,7 +97,7 @@ sub configureoffice {
# the "Generic Printer"
my @parameters = $suites{$suite}{param};
$configfilecontent = removeentry(@parameters, $configfilecontent);
- $configfilecontent =addentry($parameters[0], $parameters[1] . $suites{$suite}{perl} . $printer::data::lprcommand{$printer->{SPOOLER}{print_command}}, $configfilecontent);
+ $configfilecontent = addentry($parameters[0], $parameters[1] . $suites{$suite}{perl} . $printer::data::lprcommand{$printer->{SPOOLER}{print_command}}, $configfilecontent);
# Write back Star Office configuration file
return writesofficeconfigfile($configfilename, $configfilecontent);
}
@@ -192,21 +192,21 @@ sub makestarofficeprinterentry {
my ($printer, $queue, $configprefix, $configfile) = @_;
# Set default printer
if ($queue eq $printer->{DEFAULT}) {
- $configfile =removeentry("windows", "device=", $configfile);
- $configfile =addentry("windows",
+ $configfile = removeentry("windows", "device=", $configfile);
+ $configfile = addentry("windows",
"device=$queue,$queue PostScript,$queue",
$configfile);
}
# Make an entry in the "[devices]" section
- $configfile =removeentry("devices", "$queue=", $configfile);
- $configfile =addentry("devices",
+ $configfile = removeentry("devices", "$queue=", $configfile);
+ $configfile = addentry("devices",
"$queue=$queue PostScript,$queue",
$configfile);
# Make an entry in the "[ports]" section
# The "perl" command patches the PostScript output to print the Euro
# symbol correctly.
- $configfile =removeentry("ports", "$queue=", $configfile);
- $configfile =addentry("ports",
+ $configfile = removeentry("ports", "$queue=", $configfile);
+ $configfile = addentry("ports",
"$queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$printer::data::lprcommand{$printer->{SPOOLER}{print_command}} -P $queue",
$configfile);
# Make printer's section
@@ -219,21 +219,21 @@ sub makestarofficeprinterentry {
$pslevel = $1;
$pslevel = "2" if $pslevel eq "3";
} else { $pslevel = "2" }
- $configfile =removeentry("$queue.PostScript.$queue",
+ $configfile = removeentry("$queue.PostScript.$queue",
"Level=", $configfile);
- $configfile =addentry("$queue.PostScript.$queue",
+ $configfile = addentry("$queue.PostScript.$queue",
"Level=$pslevel", $configfile);
# Set Color/BW
my $color = ($ppd =~ /^\s*\*ColorDevice:\s*\"?([Tt]rue)\"?\s*$/m) ? "1" : "0";
- $configfile =removeentry("$queue.PostScript.$queue", "BitmapColor=", $configfile);
- $configfile =addentry("$queue.PostScript.$queue", "BitmapColor=$color", $configfile);
+ $configfile = removeentry("$queue.PostScript.$queue", "BitmapColor=", $configfile);
+ $configfile = addentry("$queue.PostScript.$queue", "BitmapColor=$color", $configfile);
# Set the default paper size
if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
my $papersize = $1;
- $configfile =removeentry("$queue.PostScript.$queue", "PageSize=", $configfile);
- $configfile =removeentry("$queue.PostScript.$queue", "PPD_PageSize=", $configfile);
- $configfile =addentry("$queue.PostScript.$queue", "PageSize=$papersize", $configfile);
- $configfile =addentry("$queue.PostScript.$queue", "PPD_PageSize=$papersize", $configfile);
+ $configfile = removeentry("$queue.PostScript.$queue", "PageSize=", $configfile);
+ $configfile = removeentry("$queue.PostScript.$queue", "PPD_PageSize=", $configfile);
+ $configfile = addentry("$queue.PostScript.$queue", "PageSize=$papersize", $configfile);
+ $configfile = addentry("$queue.PostScript.$queue", "PPD_PageSize=$papersize", $configfile);
}
# Link the PPD file
run_program::rooted($::prefix,
@@ -267,7 +267,7 @@ sub makeopenofficeprinterentry {
$configfile = removeentry($queue, "Comment=", $configfile);
if (($printer->{configured}{$queue}) &&
($printer->{configured}{$queue}{queuedata}{desc})) {
- $configfile =addentry
+ $configfile = addentry
($queue,
"Comment=$printer->{configured}{$queue}{queuedata}{desc}",
$configfile);
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 6c2fb76fc..c4ef448c1 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -1109,7 +1109,7 @@ sub setup_socket {
join '', ("socket://$remotehost", $remoteport ? (":$remoteport") : ());
#- LPD and LPRng need netcat ('nc') to access to socket printers
- if ((($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng'))&&
+ if ((($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng')) &&
(!$::testing) &&
(!files_exist((qw(/usr/bin/nc))))) {
$in->do_pkgs->install('nc');
@@ -2068,12 +2068,12 @@ You should make sure that the page size and the ink type/printing mode (if avail
my $j;
for ($j = 0; $j <= $#{$choicelists[$i]}; $j++) {
if ($choicelists[$i][$j] eq $userinputs[$i]) {
- push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{name} . "=". $shortchoicelists[$i][$j]);
+ push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{name} . "=" . $shortchoicelists[$i][$j]);
}
}
} elsif ($printer->{ARGS}[$i]{type} eq 'bool') {
# boolean option
- push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{name} . "=".
+ push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{name} . "=" .
(($choicelists[$i][0] eq $userinputs[$i]) ? "1" : "0"));
} else {
# numerical option
@@ -3447,8 +3447,7 @@ What do you want to modify on this printer?",
#- URI)
if ($printer->{configured}{$queue}) {
foreach my $type (qw(file lpd socket smb ncp postpipe)) {
- if ($printer->{currentqueue}{connect}
- =~ /^$type:/) {
+ if ($printer->{currentqueue}{connect} =~ /^$type:/) {
$printer->{TYPE} =
($type eq 'file' ? 'LOCAL' : uc($type));
last;
diff --git a/perl-install/resize_fat/main.pm b/perl-install/resize_fat/main.pm
index ba6ac1bc7..216739faf 100644
--- a/perl-install/resize_fat/main.pm
+++ b/perl-install/resize_fat/main.pm
@@ -121,13 +121,13 @@ sub resize {
$size >= $min or die "Minimum filesystem size is $min sectors";
$size <= $max or die "Maximum filesystem size is $max sectors";
- log::l("resize_fat: Partition size will be ". ($size * $SECTORSIZE >> 20) ."Mb (well exactly ${size} sectors)");
+ log::l("resize_fat: Partition size will be " . ($size * $SECTORSIZE >> 20) . "Mb (well exactly ${size} sectors)");
my $new_data_size = $size * $SECTORSIZE - $fs->{cluster_offset};
my $new_nb_clusters = divide($new_data_size, $fs->{cluster_size});
my $used_size = used_size($fs);
- log::l("resize_fat: Break point for moving files is ". ($used_size * $SECTORSIZE >> 20) ." Mb ($used_size sectors)");
+ log::l("resize_fat: Break point for moving files is " . ($used_size * $SECTORSIZE >> 20) . " Mb ($used_size sectors)");
if ($size < $used_size) {
log::l("resize_fat: Allocating new clusters");
resize_fat::fat::allocate_remap($fs, $new_nb_clusters);
diff --git a/perl-install/scanner.pm b/perl-install/scanner.pm
index 6e8ecfa7d..565a7d460 100755
--- a/perl-install/scanner.pm
+++ b/perl-install/scanner.pm
@@ -182,7 +182,7 @@ sub updateScannerDBfromSane {
model => sub {
unless ($name) { $name = $val; next }
$name = (member($mfg, keys %$sane2DB)) ?
- (ref $sane2DB->{ $mfg}) ? $sane2DB->{ $mfg}($name) : "$sane2DB->{ $mfg }|$name" : "$mfg|$name";
+ (ref $sane2DB->{$mfg}) ? $sane2DB->{$mfg}($name) : "$sane2DB->{ $mfg }|$name" : "$mfg|$name";
if (member($name, keys %$scanner::scannerDB)) {
print "#[$name] already in ScannerDB!\n";
} else {
@@ -200,7 +200,7 @@ sub updateScannerDBfromSane {
s/\s+$//;
/^\;/ and next;
($cmd, $val) = /:(\S+)\s*\"([^\;]*)\"/ or next; #log::l("bad line $lineno ($_)"), next;
- my $f = $fs->{ $cmd};
+ my $f = $fs->{$cmd};
$f ? $f->() : log::l("unknown line $lineno ($_)");
}
$fs->{model}(); # the last one
diff --git a/perl-install/steps.pm b/perl-install/steps.pm
index 1f74e282b..ee6530ee0 100644
--- a/perl-install/steps.pm
+++ b/perl-install/steps.pm
@@ -40,7 +40,7 @@ if_((arch() !~ /alpha/) && (arch() !~ /ppc/),
$h{entered} = 0;
$h{onError} = $installSteps[$i + 2 * $h{onError}];
$h{reachable} = !$h{needs};
- $installSteps{ $installSteps[$i]} = \%h;
+ $installSteps{$installSteps[$i]} = \%h;
push @orderedInstallSteps, $installSteps[$i];
}
$installSteps{first} = $installSteps[0];
diff --git a/perl-install/ugtk.pm b/perl-install/ugtk.pm
index 782002c8b..d615421b7 100644
--- a/perl-install/ugtk.pm
+++ b/perl-install/ugtk.pm
@@ -623,7 +623,7 @@ sub n_line_size {
}
sub write_on_pixmap {
- my ($pixmap, $x_pos, $y_pos, @text)=@_;
+ my ($pixmap, $x_pos, $y_pos, @text) = @_;
my ($gdkpixmap, undef) = $pixmap->get();
my ($width, $height) = (440, 250);
my $gc = Gtk::Gdk::GC->new(gtkroot());