summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/Makefile.drakxtools7
-rw-r--r--perl-install/drakxtools.spec21
-rw-r--r--perl-install/harddrake/TODO1
-rwxr-xr-xperl-install/standalone/service_harddrake14
-rw-r--r--perl-install/standalone/service_harddrake.sh57
5 files changed, 74 insertions, 26 deletions
diff --git a/perl-install/Makefile.drakxtools b/perl-install/Makefile.drakxtools
index e5e7f4ae8..bae306025 100644
--- a/perl-install/Makefile.drakxtools
+++ b/perl-install/Makefile.drakxtools
@@ -26,7 +26,7 @@ $(DIRS):
[ ! -e $@/Makefile ] || $(MAKE) -C $@
install:
- mkdir -p $(BINDEST) $(ETCDEST) $(SBINDEST) $(DATADIR)/pixmaps $(LIBDEST)/{network,security,harddrake} $(BINX11DEST) $(LIBX11DEST) $(PIXDIR) $(INITDIR)
+ mkdir -p $(BINDEST) $(ETCDEST) $(SBINDEST) $(DATADIR)/{harddrake,pixmaps} $(LIBDEST)/{network,security,harddrake} $(BINX11DEST) $(LIBX11DEST) $(PIXDIR) $(INITDIR)
install -d $(INLIBDEST_DIRS:%=$(LIBDEST)/%)
install $(STANDALONEPMS) $(SBINDEST)
install -s rpcinfo-flushed ddcprobe/ddcxinfos serial_probe/serial_probe $(SBINDEST)
@@ -50,7 +50,7 @@ install:
install -d $(LIBDEST)/diskdrake
install -m 644 diskdrake/*.pm $(LIBDEST)/diskdrake
- find $(LIBDEST) -name "*.pm" | xargs perl -pi -e '$$_ = "\n" if /\s*use\s+(diagnostics|vars|strict)/'
+ find $(LIBDEST) -name "*.pm" | xargs perl -pi -e 's/\s*use\s+(diagnostics|vars|strict)//g'
for i in $(HAVEINST_DIRS); do \
$(MAKE) -C $$i install PREFIX=$(PREFIX) DATADIR=$(DATADIR) NAME=$(NAME) ; \
@@ -59,4 +59,5 @@ install:
find auto -follow -name .exists -o -name "*.bs" | xargs rm -f
cp -rfL auto standalone/icons $(LIBDEST)
mv $(LIBDEST)/icons/harddrake2/ $(DATADIR)/pixmaps/
- mv $(SBINDEST)/service_harddrake $(INITDIR)/harddrake
+ mv $(SBINDEST)/service_harddrake.sh $(INITDIR)/harddrake
+ mv $(SBINDEST)/service_harddrake $(DATADIR)/harddrake/
diff --git a/perl-install/drakxtools.spec b/perl-install/drakxtools.spec
index d59cc4514..9c24a9f51 100644
--- a/perl-install/drakxtools.spec
+++ b/perl-install/drakxtools.spec
@@ -85,10 +85,10 @@ It autodetects both monitor and video card if possible.
%description newt
This add the capability to be runned behind a web server to the drakx tools.
-See package %{name}
+See package %name
%description http
-See package %{name}
+See package %name
%description -n harddrake
The harddrake service is a hardware probing tool run at system boot
@@ -118,12 +118,12 @@ rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/{%_initrddir,etc/sysconfig/harddrake2}
touch $RPM_BUILD_ROOT/etc/sysconfig/harddrake2/previous_hw
-mv ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor \
- ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor.real
-ln -sf %{_bindir}/consolehelper ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor
-mkdir -p ${RPM_BUILD_ROOT}%{_sysconfdir}/{pam.d,security/console.apps}
-cp pam.net_monitor $RPM_BUILD_ROOT%{_sysconfdir}/pam.d/net_monitor
-cp apps.net_monitor $RPM_BUILD_ROOT%{_sysconfdir}/security/console.apps/net_monitor
+mv $RPM_BUILD_ROOT%_sbindir/net_monitor \
+ $RPM_BUILD_ROOT%_sbindir/net_monitor.real
+ln -sf %_bindir/consolehelper $RPM_BUILD_ROOT%_sbindir/net_monitor
+mkdir -p $RPM_BUILD_ROOT%_sysconfdir/{pam.d,security/console.apps}
+cp pam.net_monitor $RPM_BUILD_ROOT%_sysconfdir/pam.d/net_monitor
+cp apps.net_monitor $RPM_BUILD_ROOT%_sysconfdir/security/console.apps/net_monitor
dirs1="usr/lib/libDrakX usr/share/libDrakX"
(cd $RPM_BUILD_ROOT ; find $dirs1 usr/bin usr/sbin ! -type d -printf "/%%p\n")|egrep -v 'bin/.*harddrake' > %{name}.list
@@ -204,7 +204,7 @@ done
%files http -f %{name}-http.list
%defattr(-,root,root)
-%dir %{_sysconfdir}/drakxtools_http
+%dir %_sysconfdir/drakxtools_http
%config(noreplace) %_sysconfdir/pam.d/miniserv
%config(noreplace) %_sysconfdir/init.d/drakxtools_http
%config(noreplace) %_sysconfdir/drakxtools_http/conf
@@ -215,6 +215,9 @@ done
* Mon Jul 8 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-3mdk
- harddrake2:
o no need to 'use strict' in "binary" => remove warnings
+ o fix boot freeze on hw change: initscript was running us with
+ stdout redirected to /dev/null; just use a small sh wrapper to
+ fix it
- spec:
o reorder entries in description
diff --git a/perl-install/harddrake/TODO b/perl-install/harddrake/TODO
index fb923790d..324b4b2d1 100644
--- a/perl-install/harddrake/TODO
+++ b/perl-install/harddrake/TODO
@@ -5,7 +5,6 @@
*** IDE, SCSI: bus => bus_id, bus="IDE/SCSI" => move into DrakX
*** SCSI: get vendor string
*** timeout on dialogs in service
-*** initscript run harddrake service redirected to /dev/null :-(
*** mouse.pm: only probe serial if :
**** serial mouse previously detected
**** no non-serial mouse found
diff --git a/perl-install/standalone/service_harddrake b/perl-install/standalone/service_harddrake
index 56fbfdbb5..09f86ad7c 100755
--- a/perl-install/standalone/service_harddrake
+++ b/perl-install/standalone/service_harddrake
@@ -1,23 +1,11 @@
#!/usr/bin/perl -w
# harddrake2 This service runs the HardDrake hardware probe.
-#
-# chkconfig: 345 05 95
-# description: This runs the hardware probe, and optionally configures \
-# changed hardware.
-
-
-# TODO: start/stop/status/
use lib qw(/usr/lib/libDrakX);
-use strict;
+#use strict;
use standalone; #- warning, standalone must be loaded very first, for 'explanations'
-if ($ARGV[0] !~ /^start$/) {
- print "service harddrake [start|stop]\n";
- exit 0;
-}
-
use MDK::Common;
use POSIX;
diff --git a/perl-install/standalone/service_harddrake.sh b/perl-install/standalone/service_harddrake.sh
new file mode 100644
index 000000000..1f5541954
--- /dev/null
+++ b/perl-install/standalone/service_harddrake.sh
@@ -0,0 +1,57 @@
+#!/bin/bash
+#
+# harddrake This scripts runs the harddrake hardware probe.
+#
+# chkconfig: 345 05 95
+# description: This runs the hardware probe, and optionally configures \
+# changed hardware.
+
+# This is an interactive program, we need the current locale
+
+[[ -f /etc/profile.d/lang.sh ]] && . /etc/profile.d/lang.sh
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+
+SUBSYS=/var/lock/subsys/harddrake
+
+case "$1" in
+ start)
+# We (mdk) don't support updfstab (yet)
+# action "Updating /etc/fstab" /usr/sbin/updfstab
+
+ gprintf "Checking for new hardware"
+ rm -f /var/run/Xconfig
+ rm -f /var/run/Xconfig-failed
+
+ # Have a 30 second timeout.
+ /usr/share/harddrake/service_harddrake
+ RETVAL=$?
+ if [ "$RETVAL" -eq 0 ]; then
+ action "" /bin/true
+ else
+ action "" /bin/false
+ fi
+ # We don't want to run this on random runlevel changes.
+ touch $SUBSYS
+# [ /etc/modules.conf -nt /lib/modules/$(uname -r)/modules.dep ] && touch /lib/modules/$(uname -r)/modules.dep 2>/dev/null >/dev/null || : &
+ exit $RETVAL
+ ;;
+ status)
+ if [ -f $SUBSYS ]; then
+ gprintf "Harddrake service was runned at boot time"
+ else gprintf "Harddrake service was not runned at boot time"
+ fi
+ ;;
+ reload)
+ ;;
+ stop)
+ # dummy
+ rm -f $SUBSYS
+ ;;
+ *)
+ gprintf "Usage: %s {start|stop}\n" "$0"
+ exit 1
+ ;;
+esac