summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/any.pm6
-rw-r--r--perl-install/bootloader.pm39
-rw-r--r--perl-install/bootlook.pm3
-rwxr-xr-xperl-install/standalone/drakboot8
4 files changed, 36 insertions, 20 deletions
diff --git a/perl-install/any.pm b/perl-install/any.pm
index 591363911..bb7777aa0 100644
--- a/perl-install/any.pm
+++ b/perl-install/any.pm
@@ -162,7 +162,7 @@ sub setupBootloader {
my $prev_clean_tmp = my $clean_tmp = grep { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special} ||= []};
$b->{vga} ||= 'normal';
- if (arch !~ /ppc/) {
+ if (arch() !~ /ppc/) {
$in->ask_from('', _("Bootloader main options"), [
{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },
arch() =~ /sparc/ ? (
@@ -197,7 +197,7 @@ sub setupBootloader {
$b->{boot} = $partition_table_mac::bootstrap_part;
$in->ask_from('', _("Bootloader main options"), [
{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },
- { label => _("Init Message"), val => \$b->{initmsg} },
+ { label => _("Init Message"), val => \$b->{init-message} },
{ label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (grep { isAppleBootstrap($_) } @$fstab))], not_edit => !$::expert },
{ label => _("Open Firmware Delay"), val => \$b->{delay} },
{ label => _("Kernel Boot Timeout"), val => \$b->{timeout} },
@@ -236,7 +236,7 @@ sub setupBootloader {
# $b->{boot} !~ /$hds->[0]{device}/ && #- not the first disk
$b->{boot} =~ /\d$/ && #- on a partition
is_empty_hash_ref($b->{bios}) #- some bios mapping already there
- ) {
+ ) && (arch() !~ /ppc/)){
my $hd = $in->ask_from_listf('', _("You decided to install the bootloader on a partition.
This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
index 60e048e7e..6975267be 100644
--- a/perl-install/bootloader.pm
+++ b/perl-install/bootloader.pm
@@ -85,6 +85,9 @@ sub read($$) {
($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
if (/^(image|other)$/) {
+ if (arch() =~ /ppc/) {
+ $v =~ s/hd:\d+,//g;
+ }
push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
$global = 0;
} elsif ($global) {
@@ -92,6 +95,10 @@ sub read($$) {
$b{bios}{$1} = $2;
} elsif ($_ eq 'bios') {
$b{bios}{$b{disk}} = $v;
+ } elsif ($_ eq 'init-message') {
+ $v =~ s/\\n//g;
+ $v =~ s/"//g;
+ $b{init-message} = $v;
} else {
$b{$_} = $v || 1;
}
@@ -99,14 +106,20 @@ sub read($$) {
if ((/map-drive/ .. /to/) && /to/) {
$e->{mapdrive}{$e->{'map-drive'}} = $v;
} else {
+ if (arch() =~ /ppc/) {
+ $v =~ s/hd:\d+,//g;
+ $v =~ s/"//g;
+ }
$e->{$_} = $v || 1;
}
}
}
- delete $b{timeout} unless $b{prompt};
- $_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
- $b{timeout} = $b{timeout} / 10 if $b{timeout};
- $b{message} = cat_("$prefix$b{message}") if $b{message};
+ if (arch() != /ppc/) {
+ delete $b{timeout} unless $b{prompt};
+ $_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
+ $b{timeout} = $b{timeout} / 10 if $b{timeout};
+ $b{message} = cat_("$prefix$b{message}") if $b{message};
+ }
\%b;
}
@@ -309,11 +322,11 @@ sub suggest {
root => "/dev/$root",
partition => $partition || 1,
boot => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
- } : arch =~ /ppc/ ?
+ } : arch() =~ /ppc/ ?
{
defaultos => "linux",
entries => [],
- initmsg => "Welcome to Mandrake Linux!",
+ init-message => "Welcome to Mandrake Linux!",
delay => 30, #- OpenFirmware delay
timeout => 50,
enableofboot => 1,
@@ -394,11 +407,11 @@ wait %d seconds for default boot.
}
} elsif (arch() =~ /ppc/) {
#- if we identified a MacOS partition earlier - add it
- if (defined $partition_table_mac'macos_part) {
+ if (defined $partition_table_mac::macos_part) {
add_entry($lilo->{entries},
{
label => "macos",
- kernel_or_dev => $partition_table_mac'macos_part
+ kernel_or_dev => $partition_table_mac::macos_part
});
}
} elsif (arch() !~ /ia64/) {
@@ -525,7 +538,7 @@ sub install_yaboot($$$) {
log::l("writing yaboot config to $f");
print F "#yaboot.conf - generated by DrakX";
- print F "init-message=\"\\n$lilo->{initmsg}\\n\"" if $lilo->{initmsg};
+ print F "init-message=\"\\n$lilo->{init-message}\\n\"" if $lilo->{init-message};
if ($lilo->{boot}) {
print F "boot=$lilo->{boot}";
@@ -540,14 +553,14 @@ sub install_yaboot($$$) {
print F "magicboot=/usr/local/lib/yaboot/ofboot";
$lilo->{$_} and print F $_ foreach qw(enablecdboot enableofboot);
$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(defaultos default);
- print F "nonvram";
+ #- print F "nonvram";
my $boot = "/dev/" . $lilo->{useboot} if $lilo->{useboot};
foreach (@{$lilo->{entries}}) {
if ($_->{type} eq "image") {
my $of_dev = '';
- if ($boot !~ /$_->{root}/) {
+ if (($boot !~ /$_->{root}/) && $boot) {
$of_dev = get_of_dev($prefix, $boot);
print F "$_->{type}=$of_dev," . substr($_->{kernel_or_dev}, 5);
} else {
@@ -556,14 +569,14 @@ sub install_yaboot($$$) {
}
print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
print F "\troot=$_->{root}";
- if ($boot !~ /$_->{root}/) {
+ if (($boot !~ /$_->{root}/) && $boot) {
print F "\tinitrd=$of_dev," . substr($_->{initrd}, 5) if $_->{initrd};
} else {
print F "\tinitrd=$of_dev,$_->{initrd}" if $_->{initrd};
}
#- xfs module on PPC requires larger initrd - say 6MB?
print F "\tinitrd-size=6144" if $lilo->{xfsroot};
- print F "\tappend=\"$_->{append}\"" if $_->{append};
+ print F "\tappend=\" $_->{append}\"" if $_->{append};
print F "\tread-write" if $_->{'read-write'};
print F "\tread-only" if !$_->{'read-write'};
} else {
diff --git a/perl-install/bootlook.pm b/perl-install/bootlook.pm
index ba4986f10..133ce3c9c 100644
--- a/perl-install/bootlook.pm
+++ b/perl-install/bootlook.pm
@@ -95,9 +95,10 @@ my $a_g_button = new Gtk::RadioButton _("Traditional Gtk+ Monitor"),$a_c_button
my $a_button = new Gtk::CheckButton(_("Launch Aurora at boot time"));
my $a_box = new Gtk::VBox(0, 0);
my $x_box = new Gtk::VBox(0, 0);
+my $disp_mode = arch() =~ /ppc/ ? "Yaboot mode" : "Lilo/grub mode";
gtkadd($window,
gtkpack__ (my $global_vbox = new Gtk::VBox(0,0),
- gtkadd (new Gtk::Frame (_("Lilo/grub mode")),
+ gtkadd (new Gtk::Frame (_("$disp_mode")),
# gtkpack__(new Gtk::VBox(0,0),
(gtkpack_(gtkset_border_width(new Gtk::HBox(0, 0),5),
1,_("You are currently using %s as Boot Manager.
diff --git a/perl-install/standalone/drakboot b/perl-install/standalone/drakboot
index 693307552..0d35c4498 100755
--- a/perl-install/standalone/drakboot
+++ b/perl-install/standalone/drakboot
@@ -37,9 +37,9 @@ goto ask;
sub lilo_choice
{
- my $bootloader = bootloader::read('', '/etc/lilo.conf');
+ my $bootloader = arch() =~ /ppc/ ? bootloader::read('', '/etc/yaboot.conf') : bootloader::read('', '/etc/lilo.conf');
local ($_) = `detectloader`;
- $bootloader->{methods} = { lilo => 1, grub => !!/grub/i };
+ $bootloader->{methods} = { lilo => 1, grub => !!/grub/i, yaboot => 1 };
my ($all_hds) = catch_cdie { fsedit::hds([ detect_devices::hds() ], {}) } sub { 1 };
my $fstab = [ fsedit::get_all_fstab($all_hds) ];
@@ -52,9 +52,11 @@ sub lilo_choice
any::setupBootloader($in, $bootloader, $all_hds, $fstab, $ENV{SECURE_LEVEL}) or return;
eval { bootloader::install('', $bootloader, $fstab, $all_hds->{hds}) };
+ my $loader = arch() =~ /ppc/ ? "Yaboot" : "LILO";
if ($@) {
$in->ask_warn('',
- [ _("Installation of LILO failed. The following error occured:"),
+ [ _("Installation of $loader failed. The following error
+occured:"),
grep { !/^Warning:/ } cat_("/tmp/.error") ]);
unlink "/tmp/.error";
goto ask;