summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/Xconfig.pm78
-rw-r--r--perl-install/Xconfigurator.pm533
2 files changed, 304 insertions, 307 deletions
diff --git a/perl-install/Xconfig.pm b/perl-install/Xconfig.pm
index b724f3591..975121235 100644
--- a/perl-install/Xconfig.pm
+++ b/perl-install/Xconfig.pm
@@ -24,17 +24,17 @@ sub keyboard_from_kmap {
sub info {
my ($X) = @_;
my $info;
- my $xf_ver = $X->{card}{use_xf4} ? "4.2.0" : "3.3.6";
- my $title = ($X->{card}{DRI_GLX} || $X->{UTAH_GLX} ?
+ my $xf_ver = $X->{card}{driver} && !$X->{card}{prefer_xf3} ? "4.2.0" : "3.3.6";
+ my $title = ($X->{card}{use_DRI_GLX} || $X->{card}{use_UTAH_GLX} ?
_("XFree %s with 3D hardware acceleration", $xf_ver) : _("XFree %s", $xf_ver));
$info .= _("Keyboard layout: %s\n", $X->{keyboard}{XkbLayout});
$info .= _("Mouse type: %s\n", $X->{mouse}{XMOUSETYPE});
$info .= _("Mouse device: %s\n", $X->{mouse}{device}) if $::expert;
- $info .= _("Monitor: %s\n", $X->{monitor}{type});
+ $info .= _("Monitor: %s\n", $X->{monitor}{ModelName});
$info .= _("Monitor HorizSync: %s\n", $X->{monitor}{hsyncrange}) if $::expert;
$info .= _("Monitor VertRefresh: %s\n", $X->{monitor}{vsyncrange}) if $::expert;
- $info .= _("Graphics card: %s\n", $X->{card}{type});
+ $info .= _("Graphics card: %s\n", $X->{card}{VendorName} . ' '. $X->{card}{BoardName});
$info .= _("Graphics card identification: %s\n", $X->{card}{identifier}) if $::expert;
$info .= _("Graphics memory: %s kB\n", $X->{card}{VideoRam}) if $X->{card}{VideoRam};
if ($X->{default_depth} and my $depth = $X->{card}{depth}{$X->{default_depth}}) {
@@ -65,7 +65,7 @@ sub getinfoFromXF86Config {
$X ||= {};
my (%keyboard, %mouse, %wacom, %card, %monitor);
- my (%c, $depth, $driver);
+ my (%c, $depth);
foreach (cat_("$prefix/etc/X11/XF86Config-4")) {
if (my $i = /^Section "InputDevice"/ .. /^EndSection/) {
@@ -92,7 +92,6 @@ sub getinfoFromXF86Config {
if $c{driver} =~ /wacom/i;
}
} elsif (/^Section "Monitor"/ .. /^EndSection/) {
- $monitor{type} ||= $1 if /^\s*Identifier\s+"(.*?)"/;
$monitor{hsyncrange} ||= $1 if /^\s*HorizSync\s+(.*)/;
$monitor{vsyncrange} ||= $1 if /^\s*VertRefresh\s+(.*)/;
$monitor{ModeLines} .= $_ if /^\s*Mode[lL]ine\s+(\S+)\s+(\S+)\s+/;
@@ -109,6 +108,7 @@ sub getinfoFromXF86Config {
}
}
}
+ my $first_screen_section;
foreach (cat_("$prefix/etc/X11/XF86Config")) {
if (/^Section "Keyboard"/ .. /^EndSection/) {
$keyboard{XkbModel} ||= $1 if /^\s*XkbModel\s+"(.*?)"/;
@@ -124,34 +124,35 @@ sub getinfoFromXF86Config {
$wacom{$1} = undef if /^\s*Port\s+"\/dev\/(.*?)"/;
}
} elsif (/^Section "Monitor"/ .. /^EndSection/) {
- $monitor{type} ||= $1 if /^\s*Identifier\s+"(.*?)"/;
$monitor{hsyncrange} ||= $1 if /^\s*HorizSync\s+(.*)/;
$monitor{vsyncrange} ||= $1 if /^\s*VertRefresh\s+(.*)/;
$monitor{ModeLines_xf3} .= $_ if /^\s*Mode[lL]ine\s+(\S+)\s+(\S+)\s+/;
} elsif (my $i = /^Section "Device"/ .. /^EndSection/) {
%c = () if $i == 1;
- $c{type} ||= $1 if /^\s*Identifier\s+"(.*?)"/;
+ $c{indentifier} ||= $1 if /^\s*Identifier\s+"(.*?)"/;
$c{VideoRam} ||= $1 if /VideoRam\s+(\d+)/;
- $c{flags}{needVideoRam} ||= 1 if /^\s*VideoRam\s+/;
+ $c{needVideoRam} ||= 1 if /^\s*VideoRam\s+/;
$c{driver} ||= $1 if /^\s*Driver\s+"(.*?)"/;
+ $c{VendorName} ||= $1 if /^\s*VendorName\s+"(.*?)"/;
+ $c{BoardName} ||= $1 if /^\s*BoardName\s+"(.*?)"/;
+ $c{Chipset} ||= $1 if /^\s*Chipset\s+"(.*?)"/;
$c{options_xf3}{$1} ||= 0 if /^\s*#\s*Option\s+"(.*?)"/;
$c{options_xf3}{$1} ||= 1 if /^\s*Option\s+"(.*?)"/;
- add2hash(\%card, \%c) if ($i =~ /E0/ && $c{type} && $c{type} ne "Generic VGA");
+ add2hash(\%card, \%c) if ($i =~ /E0/ && $c{identifier} && $c{identifier} ne "Generic VGA");
} elsif (my $s = /^Section "Screen"/ .. /^EndSection/) {
- undef $driver if $s == 1;
- $driver = $1 if /^\s*Driver\s+"(.*?)"/;
- if ($driver eq $Xconfigurator_consts::serversdriver{$card{server}}) {
- $card{default_depth} ||= $1 if /^\s*DefaultColorDepth\s+(\d+)/;
- if (my $i = /^\s*Subsection\s+"Display"/ .. /^\s*EndSubsection/) {
- undef $depth if $i == 1;
- $depth = $1 if /^\s*Depth\s+(\d*)/;
- if (/^\s*Modes\s+(.*)/) {
- my $a = 0;
- unshift @{$card{depth}{$depth || 8} ||= []}, #- insert at the beginning for resolution_wanted!
- grep { $_->[0] >= 640 } map { [ /"(\d+)x(\d+)"/ ] } split ' ', $1;
- }
+ $first_screen_section++ if $s =~ /E0/;
+ $first_screen_section or next;
+
+ $card{default_depth} ||= $1 if /^\s*DefaultColorDepth\s+(\d+)/;
+ if (my $i = /^\s*Subsection\s+"Display"/ .. /^\s*EndSubsection/) {
+ undef $depth if $i == 1;
+ $depth = $1 if /^\s*Depth\s+(\d*)/;
+ if (/^\s*Modes\s+(.*)/) {
+ my $a = 0;
+ unshift @{$card{depth}{$depth || 8} ||= []}, #- insert at the beginning for resolution_wanted!
+ grep { $_->[0] >= 640 } map { [ /"(\d+)x(\d+)"/ ] } split ' ', $1;
}
}
}
@@ -240,7 +241,6 @@ sub add2card {
my ($card, $other_card) = @_;
push @{$card->{lines}}, @{$other_card->{lines} || []};
- add2hash($card->{flags}, $other_card->{flags});
add2hash($card, $other_card);
}
@@ -253,36 +253,26 @@ sub readCardsDB {
my ($lineno, $cmd, $val) = 0;
my $fs = {
NAME => sub {
- $cards{$card->{type}} = $card if $card;
- $card = { type => $val };
+ $cards{$card->{card_name}} = $card if $card;
+ $card = { card_name => $val };
},
SEE => sub {
my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
add2card($card, $c);
},
- CHIPSET => sub {
- $card->{Chipset} = $val;
- $card->{flags}{needVideoRam} = 1 if member($val, qw(mgag10 mgag200 RIVA128 SiS6326));
- },
- LINE => sub {
- push @{$card->{lines}}, $val;
- },
+ LINE => sub { push @{$card->{lines}}, $val },
+ CHIPSET => sub { $card->{Chipset} = $val },
SERVER => sub { $card->{server} = $val },
DRIVER => sub { $card->{driver} = $val },
DRIVER2 => sub { $card->{driver2} = $val },
- NEEDVIDEORAM => sub { $card->{flags}{needVideoRam} = 1 },
- DRI_GLX => sub { $card->{DRI_GLX} = 1 },
- UTAH_GLX => sub { $card->{UTAH_GLX} = 1 },
- DRI_GLX_EXPERIMENTAL => sub { $card->{DRI_GLX_EXPERIMENTAL} = 1 },
- UTAH_GLX_EXPERIMENTAL => sub { $card->{UTAH_GLX_EXPERIMENTAL} = 1 },
- MULTI_HEAD => sub { $card->{MULTI_HEAD} = $val },
+ NEEDVIDEORAM => sub { $card->{needVideoRam} = 1 },
+ DRI_GLX => sub { $card->{DRI_GLX} = 1 if $card->{driver} },
+ UTAH_GLX => sub { $card->{UTAH_GLX} = 1 if $card->{server} },
+ DRI_GLX_EXPERIMENTAL => sub { $card->{DRI_GLX_EXPERIMENTAL} = 1 if $card->{driver} },
+ UTAH_GLX_EXPERIMENTAL => sub { $card->{UTAH_GLX_EXPERIMENTAL} = 1 if $card->{server} },
+ MULTI_HEAD => sub { $card->{MULTI_HEAD} = $val if $card->{driver} },
UNSUPPORTED => sub { delete $card->{driver} },
- #- Obsolete stuff, no existing card still need this
- RAMDAC => sub { $card->{Ramdac} = $val },
- DACSPEED => sub { $card->{Dacspeed} = $val },
- CLOCKCHIP => sub { $card->{Clockchip} = $val },
-
COMMENT => sub {},
};
@@ -291,7 +281,7 @@ sub readCardsDB {
s/\s+$//;
/^#/ and next;
/^$/ and next;
- /^END/ and do { $cards{$card->{type}} = $card if $card; last };
+ /^END/ and do { $cards{$card->{card_name}} = $card if $card; last };
($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next;
diff --git a/perl-install/Xconfigurator.pm b/perl-install/Xconfigurator.pm
index 37c689eff..7c5705afa 100644
--- a/perl-install/Xconfigurator.pm
+++ b/perl-install/Xconfigurator.pm
@@ -14,8 +14,7 @@ use any;
use modules;
my $tmpconfig = "/tmp/Xconfig";
-
-my ($prefix);
+my $force_xf4 = arch() =~ /ppc|ia64/;
sub xtest {
@@ -25,6 +24,11 @@ sub xtest {
c::Xtest($display);
}
+sub using_xf4 {
+ my ($card) = @_;
+ $card->{driver} && !$card->{prefer_xf3};
+}
+
sub readCardsNames {
my $file = "$ENV{SHARE_PATH}/ldetect-lst/CardsNames";
map { (split '=>')[0] } grep { !/^#/ } catMaybeCompressed($file);
@@ -55,6 +59,14 @@ sub updateCardAccordingName {
my ($card, $name) = @_;
my $cards = Xconfig::readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+");
Xconfig::add2card($card, $cards->{$name});
+
+ delete @$card{'server'} if $force_xf4;
+
+ delete @$card{'UTAH_GLX', 'UTAH_GLX_EXPERIMENTAL'}
+ if $force_xf4 || availableRamMB() > 800; #- no Utah GLX if more than 800 Mb (server, or kernel-enterprise, Utha GLX does not work with latest).
+
+ $card->{prefer_xf3} = 1 if $card->{driver} eq 'neomagic' && !$force_xf4;
+
$card;
}
@@ -71,15 +83,15 @@ sub readMonitorsDB {
/^#/ and next;
/^$/ and next;
- my @fields = qw(vendor type eisa hsyncrange vsyncrange dpms);
+ my @fields = qw(VendorName ModelName eisa hsyncrange vsyncrange dpms);
my @l = split /\s*;\s*/;
my %l; @l{@fields} = @l;
- if ($monitors{$l{type}}) {
- my $i; for ($i = 0; $monitors{"$l{type} ($i)"}; $i++) {}
- $l{type} = "$l{type} ($i)";
+ if ($monitors{$l{ModelName}}) {
+ my $i; for ($i = 0; $monitors{"$l{ModelName} ($i)"}; $i++) {}
+ $l{ModelName} = "$l{ModelName} ($i)";
}
- $monitors{"$l{vendor}|$l{type}"} = \%l;
+ $monitors{"$l{VendorName}|$l{ModelName}"} = \%l;
}
\%monitors;
}
@@ -102,9 +114,11 @@ sub keepOnlyLegalModes {
sub cardConfigurationAuto() {
my @c = grep { $_->{driver} =~ /(Card|Server|Driver):/ } detect_devices::probeall();
- my @cards = map_index {
+ my @cards = map {
+ my @l = $_->{description} =~ /(.*?)\|(.*)/;
my $card = {
- identifier => $_->{description} . (@c > 1 && " $::i"),
+ description => $_->{description},
+ VendorName => $l[0], BoardName => $l[1],
busid => "PCI:$_->{pci_bus}:$_->{pci_device}:$_->{pci_function}",
};
if ($_->{driver} =~ /Card:(.*)/) { updateCardAccordingName($card, $1) }
@@ -115,7 +129,7 @@ sub cardConfigurationAuto() {
$card;
} @c;
- if (@cards >= 2 && $cards[0]{type} eq $cards[1]{type} && $cards[0]{type} eq 'Intel 830') {
+ if (@cards >= 2 && $cards[0]{card_name} eq $cards[1]{card_name} && $cards[0]{card_name} eq 'Intel 830') {
shift @cards;
}
#- take a default on sparc if nothing has been found.
@@ -124,27 +138,17 @@ sub cardConfigurationAuto() {
local $_ = cat_("/proc/fb");
@cards = { server => /Mach64/ ? "Mach64" : /Permedia2/ ? "3DLabs" : "Sun24" };
}
- #- special case for multi head card using only one busid.
- @cards = map {
- if ($_->{MULTI_HEAD} && $_->{type} =~ /G[24]00/) {
- if ($ENV{MATROX_HAL}) {
- $_->{flags}{need_MATROX_HAL} = 1;
- } else {
- delete $_->{MULTI_HEAD};
- }
- }
- map { {%$_} } ($_) x ($_->{MULTI_HEAD} || 1);
- } @cards;
- #- make sure no type are already used, duplicate both screen
- #- and rename type (because used as id).
- if (@cards > 1) {
- my $card = 1;
- foreach (@cards) {
- $_->{type} = "$_->{type} $card";
- $card++;
+ #- disabling MULTI_HEAD when not available
+ foreach (@cards) {
+ $_->{MULTI_HEAD} && $_->{card_name} =~ /G[24]00/ or next;
+ if ($ENV{MATROX_HAL}) {
+ $_->{need_MATROX_HAL} = 1;
+ } else {
+ delete $_->{MULTI_HEAD};
}
}
+
#- in case of only one cards, remove all busid reference, this will avoid
#- need of change of it if the card is moved.
#- on many PPC machines, card is on-board, busid is important, leave?
@@ -159,260 +163,279 @@ sub install_server {
my ($card, $cardOptions) = @_;
my $prog = "/usr/X11R6/bin/" .
- ($card->{use_xf4} ? 'XFree86' :
+ (using_xf4($card) ? 'XFree86' :
$card->{server} =~ /Sun(.*)/ ? "Xsun$1" :
$card->{server} eq 'Xpmac' ? 'Xpmac' :
"XF86_$card->{server}");
my @packages = ();
- -x "$prefix$prog" or push @packages, $card->{use_xf4} ? 'XFree86-server' : "XFree86-$card->{server}";
+ push @packages, using_xf4($card) ? 'XFree86-server' : "XFree86-$card->{server}" if ! -x "$::prefix$prog";
#- additional packages to install according available card.
#- add XFree86-libs-DRI here if using DRI (future split of XFree86 TODO)
- if ($card->{DRI_GLX}) {
- push @packages, 'Glide_V5' if $card->{type} eq 'Voodoo5 (generic)';
- push @packages, 'Glide_V3-DRI' if member($card->{type}, 'Voodoo3 (generic)', 'Voodoo Banshee (generic)');
- push @packages, 'XFree86-glide-module' if $card->{type} =~ /Voodoo/;
+ if ($card->{use_DRI_GLX}) {
+ push @packages, 'Glide_V5' if $card->{card_name} eq 'Voodoo5 (generic)';
+ push @packages, 'Glide_V3-DRI' if member($card->{card_name}, 'Voodoo3 (generic)', 'Voodoo Banshee (generic)');
+ push @packages, 'XFree86-glide-module' if $card->{card_name} =~ /Voodoo/;
}
- if ($card->{UTAH_GLX}) {
+ if ($card->{use_UTAH_GLX}) {
push @packages, 'Mesa';
}
#- 3D acceleration configuration for XFree 4 using NVIDIA driver (TNT, TN2 and GeForce cards only).
push @packages, @{$cardOptions->{allowNVIDIA_rpms}} if $card->{driver2} eq 'nvidia' && $cardOptions->{allowNVIDIA_rpms};
$do_pkgs->install(@packages) if @packages;
- -x "$prefix$prog" or die "server $card->{server} is not available (should be in $prefix$prog)";
+ -x "$::prefix$prog" or die "server $card->{server} is not available (should be in $::prefix$prog)";
#- make sure everything is correct at this point, packages have really been installed
#- and driver and GLX extension is present.
if ($card->{driver2} eq 'nvidia' &&
- -e "$prefix/usr/X11R6/lib/modules/drivers/nvidia_drv.o" &&
- -e "$prefix/usr/X11R6/lib/modules/extensions/libglx.so") {
+ -e "$::prefix/usr/X11R6/lib/modules/drivers/nvidia_drv.o" &&
+ -e "$::prefix/usr/X11R6/lib/modules/extensions/libglx.so") {
log::l("Using specific NVIDIA driver and GLX extensions");
$card->{driver} = 'nvidia';
}
- Xconfig::install_matrox_proprietary_hal($prefix) if $card->{flags}{need_MATROX_HAL};
+ Xconfig::install_matrox_proprietary_hal($::prefix) if $card->{need_MATROX_HAL};
$prog;
}
-sub cardConfiguration {
- my ($card, $noauto, $cardOptions) = @_;
- $card ||= {};
+sub multi_head_config {
+ my ($noauto, @cards) = @_;
+
+ @cards > 1 || $cards[0]{MULTI_HEAD} > 1 or return $cards[0];
+
+ my @choices;
- updateCardAccordingName($card, $card->{type}) if $card->{type}; #- try to get info from given type
- undef $card->{type} unless $card->{server} || $card->{driver}; #- bad type as we can't find the server
- my @cards = cardConfigurationAuto();
- if (@cards > 1 && ($noauto || !$card->{server})) {#} && !$::isEmbedded) {
- my (%single_heads, @choices, $tc);
+ my $disable_multi_head = grep {
+ $_->{driver} or log::l("found card $_->{description} not supported by XF4, disabling multi-head support");
+ !$_->{driver};
+ } @cards;
+ if (!$disable_multi_head) {
my $configure_multi_head = sub {
- add2hash($card, $cards[0]); #- assume good default.
- delete $card->{cards} if $noauto;
- $card->{cards} or $card->{cards} = \@cards;
- $card->{force_xf4} = 1; #- force XF4 in such case.
+
+ #- special case for multi head card using only one busid.
+ @cards = map {
+ map_index { { screen => $::i, %$_ } } ($_) x ($_->{MULTI_HEAD} || 1);
+ } @cards;
+
+ delete $_->{server} foreach @cards; #- XFree 3 doesn't handle multi head (?)
+ my $card = shift @cards; #- assume good default.
+ $card->{cards} = \@cards;
$card->{Xinerama} = $_[0];
+ $card;
};
- foreach (@cards) {
- if (!$_->{driver}) {
- log::l("found card \"$_->{identifier}\" not supported by XF4, disabling mutli-head support");
- $configure_multi_head = undef;
- }
- #- if more than one card use the same BusID, we have to use screen.
- if ($single_heads{$_->{busid}}) {
- $single_heads{$_->{busid}}{screen} ||= 0;
- $_->{screen} = $single_heads{$_->{busid}}{screen} + 1;
- }
- $single_heads{$_->{busid}} = $_;
- }
- if ($configure_multi_head) {
- push @choices, { text => _("Configure all heads independently"), code => sub { $configure_multi_head->('') } };
- push @choices, { text => _("Use Xinerama extension"), code => sub { $configure_multi_head->(1) } };
- }
- foreach my $e (values %single_heads) {
- push @choices, { text => _("Configure only card \"%s\" (%s)", $e->{identifier}, $e->{busid}),
- code => sub { add2hash($card, $e); foreach (qw(cards screen Xinerama)) { delete $card->{$_} } } };
- }
- $tc = $in->ask_from_listf(_("Multi-head configuration"),
-_("Your system support multiple head configuration.
-What do you want to do?"), sub { translate($_[0]{text}) }, \@choices) or return; #- no more die, CHECK with auto that return ''!
- $tc->{code} and $tc->{code}();
- } else {
- #- only one head found, configure it as before.
- add2hash($card, $cards[0]) if !$noauto;
- delete $card->{cards}; delete $card->{Xinerama};
+ push @choices, { text => _("Configure all heads independently"), code => sub { $configure_multi_head->('') } };
+ push @choices, { text => _("Use Xinerama extension"), code => sub { $configure_multi_head->(1) } };
}
- $card->{server} = 'FBDev' unless !$cardOptions->{allowFB} || $card->{server} || $card->{driver} || $card->{type} || $noauto;
-
- my $currentRealName = realName2CardName($card->{type} || $cards[0]{type}) || 'Other|Unlisted';
- $card->{type} = cardName2RealName($in->ask_from_treelist(_("Graphics card"),
- _("Select a graphics card"), '|', ['Other|Unlisted', readCardsNames()],
- $currentRealName))
- or return unless $card->{type} || $card->{server} || $card->{driver};
-
- updateCardAccordingName($card, $card->{type}) if $card->{type};
- #- check to use XFree 4 or XFree 3.3.
- $card->{use_xf4} = $card->{driver};
- $card->{force_xf4} ||= arch() =~ /ppc|ia64/; #- try to figure out ugly hack for PPC (recommend XF4 always so...)
- $card->{prefer_xf3} = !$card->{force_xf4} && $card->{type} =~ /NeoMagic /;
- #- take into account current environment in standalone to keep
- #- the XFree86 version.
- if ($::isStandalone) {
- readlink("$prefix/etc/X11/X") =~ /XFree86/ and $card->{prefer_xf3} = 0;
- readlink("$prefix/etc/X11/X") =~ /XF86_/ and $card->{prefer_xf3} = !$card->{force_xf4};
+ foreach my $c (@cards) {
+ push @choices, { text => _("Configure only card \"%s\"%s", $c->{description}, $c->{busid} && " ($c->{busid})"),
+ code => sub { $c } };
}
+ my $tc = $in->ask_from_listf(_("Multi-head configuration"),
+ _("Your system support multiple head configuration.
+What do you want to do?"), sub { $_[0]{text} }, \@choices) or return; #- no more die, CHECK with auto that return ''!
- #- manage X 3.3.6 or above 4.2.0 specific server or driver.
- if ($card->{type} eq 'Other|Unlisted') {
- undef $card->{type};
+ $tc->{code} or die internal_error();
+ return $tc->{code}();
+}
- my @list = ('server', $cardOptions->{allowFB} ? @Xconfigurator_consts::allservers : @Xconfigurator_consts::allbutfbservers);
- my $default_server = if_(!$card->{use_xf4} || $card->{prefer_xf3}, $card->{server} || $cards[0]{server}) || 'server';
- $card->{server} = $in->ask_from_list(_("X server"), _("Choose a X server"), \@list, $default_server) or return;
+sub xfree_and_glx_choices {
+ my ($card) = @_;
- if ($card->{server} eq 'server') {
- my $fake_card = {};
- updateCardAccordingName($fake_card, $cards[0]{type}) if $cards[0]{type};
- $card->{server} = $card->{prefer_xf3} = undef;
- $card->{use_xf4} = $card->{force_xf4} = 1;
- $card->{driver} = $in->ask_from_list(_("X driver"), _("Choose a X driver"),
- ($cardOptions->{allowFB} ? \@Xconfigurator_consts::alldrivers : \@Xconfigurator_consts::allbutfbdrivers),
- $card->{driver} || $fake_card->{driver} || $cards[0]{driver}) or return;
- } else {
- $card->{driver} = $card->{use_xf4} = $card->{force_xf4} = undef;
- $card->{prefer_xf3} = 1;
- }
- }
+ $card->{use_UTAH_GLX} = $card->{use_DRI_GLX} = 0;
- foreach ($card, @{$card->{cards} || []}) {
- $_->{VideoRam} = 4096, delete $_->{depth} if $_->{driver} eq 'i810';
- $_->{VideoRam} = 16384, delete $_->{depth} if $_->{Chipset} =~ /PERMEDIA/ && $_->{VideoRam} <= 1024;
- }
- if (availableRamMB() > 800 || arch() =~ /ppc/) {
- #- No 3D XFree 3.3 for PPC
- #- and no Utah GLX if more than 800 Mb (server, or kernel-enterprise, Utha GLX does not work with latest).
- $card->{UTAH_GLX} = $card->{UTAH_GLX_EXPERIMENTAL} = '';
- }
#- XFree version available, better to parse available package and get version from it.
- my ($xf4_ver, $xf3_ver) = ("4.2.0", "3.3.6");
- #- basic installation, use of XFree 4.2 or XFree 3.3.
- my $xf3_tc = { text => _("XFree %s", $xf3_ver),
- code => sub { $card->{UTAH_GLX} = $card->{DRI_GLX} = ''; $card->{use_xf4} = '';
- log::l("Using XFree $xf3_ver") } };
- my $msg = _("Which configuration of XFree do you want to have?");
- my @choices = $card->{use_xf4} ? (if_($card->{prefer_xf3}, $xf3_tc),
- if_(!$card->{prefer_xf3} || $::expert || $noauto,
- { text => _("XFree %s", $xf4_ver),
- code => sub { $card->{UTAH_GLX} = $card->{DRI_GLX} = '';
- log::l("Using XFree $xf4_ver") } }),
- if_(!$card->{prefer_xf3} && !$card->{force_xf4} && ($::expert || $noauto), $xf3_tc)) : $xf3_tc;
+ my ($xf4_ver, $xf3_ver) = ('4.2.0', '3.3.6');
+
+ my @choices = do {
+ #- basic installation, use of XFree 4.2 or XFree 3.3.
+ my $xf3 = { text => _("XFree %s", $xf4_ver), code => sub { $card->{prefer_xf3} = 0 } };
+ my $xf4 = { text => _("XFree %s", $xf3_ver), code => sub { $card->{prefer_xf3} = 1 } };
+ $card->{prefer_xf3} ? ($xf3, $xf4) : ($xf4, $xf3);
+ };
+
#- try to figure if 3D acceleration is supported
#- by XFree 3.3 but not XFree 4 then ask user to keep XFree 3.3 ?
- if ($card->{UTAH_GLX} && !$card->{force_xf4}) {
- $msg = ($card->{use_xf4} && !$card->{DRI_GLX} && !$card->{prefer_xf3} ?
+ if ($card->{UTAH_GLX}) {
+ unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf3_ver),
+ code => sub { $card->{prefer_xf3} = 1; $card->{use_UTAH_GLX} = 1 },
+ more_messages => ($card->{driver} && !$card->{DRI_GLX} ?
_("Your card can have 3D hardware acceleration support but only with XFree %s.
Your card is supported by XFree %s which may have a better support in 2D.", $xf3_ver, $xf4_ver) :
-_("Your card can have 3D hardware acceleration support with XFree %s.", $xf3_ver)) . "\n\n\n" . $msg;
- $::expert || $noauto or @choices = (); #- keep it by default here as it is the only choice available.
- unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf3_ver),
- code => sub { $card->{use_xf4} = '';
- log::l("Using XFree $xf3_ver with 3D hardware acceleration") } };
- }
-
- #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration.
- if ($::expert && $card->{use_xf4} && $card->{DRI_GLX_EXPERIMENTAL} && !$card->{Xinerama}) {
- $msg =
-_("Your card can have 3D hardware acceleration support with XFree %s,
-NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf4_ver) . "\n\n\n" . $msg;
- push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf4_ver),
- code => sub { $card->{DRI_GLX} = 'EXPERIMENTAL';
- log::l("Using XFree $xf4_ver with EXPERIMENTAL 3D hardware acceleration") } };
+_("Your card can have 3D hardware acceleration support with XFree %s.", $xf3_ver)),
+ };
}
#- an expert user may want to try to use an EXPERIMENTAL 3D acceleration, currenlty
#- this is with Utah GLX and so, it can provide a way of testing.
- if ($::expert && $card->{UTAH_GLX_EXPERIMENTAL} && !$card->{force_xf4}) {
- $msg = ($card->{use_xf4} && !$card->{DRI_GLX} && !$card->{prefer_xf3} ?
+ if ($card->{UTAH_GLX_EXPERIMENTAL} && $::expert) {
+ push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf3_ver),
+ code => sub { $card->{prefer_xf3} = 1; $card->{use_UTAH_GLX} = 1 },
+ more_messages => (using_xf4($card) && !$card->{DRI_GLX} ?
_("Your card can have 3D hardware acceleration support but only with XFree %s,
NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
Your card is supported by XFree %s which may have a better support in 2D.", $xf3_ver, $xf4_ver) :
_("Your card can have 3D hardware acceleration support with XFree %s,
-NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf3_ver)) . "\n\n\n" . $msg;
- push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf3_ver),
- code => sub { $card->{use_xf4} = ''; $card->{UTAH_GLX} = 'EXPERIMENTAL';
- log::l("Using XFree $xf3_ver with EXPERIMENTAL 3D hardware acceleration") } };
+NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf3_ver)),
+ };
}
#- ask the expert or any user on second pass user to enable or not hardware acceleration support.
- if ($card->{use_xf4} && $card->{DRI_GLX} && !$card->{Xinerama}) {
- $msg = _("Your card can have 3D hardware acceleration support with XFree %s.", $xf4_ver) . "\n\n\n" . $msg;
- $::expert || $noauto or @choices = (); #- keep all user by default with XFree 4 including 3D acceleration.
+ if ($card->{DRI_GLX} && !$card->{Xinerama}) {
unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf4_ver),
- code => sub { log::l("Using XFree $xf4_ver with 3D hardware acceleration") } };
+ code => sub { $card->{prefer_xf3} = 0; $card->{use_DRI_GLX} = 1 },
+ more_messages => _("Your card can have 3D hardware acceleration support with XFree %s.", $xf4_ver),
+ };
}
- if (arch() =~ /ppc/) {
- #- not much choice for PPC - we only have XF4, and Xpmac from the installer
- @choices = { text => _("XFree %s", $xf4_ver), code => sub { $card->{use_xf4} = 1; log::l("Using XFree $xf4_ver") } };
+
+ #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration.
+ if ($card->{DRI_GLX_EXPERIMENTAL} && !$card->{Xinerama} && $::expert) {
+ push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf4_ver),
+ code => sub { $card->{prefer_xf3} = 0; $card->{use_DRI_GLX} = 1 },
+ more_messages => _("Your card can have 3D hardware acceleration support with XFree %s,
+NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf4_ver),
+ };
+ }
+
+ if (arch() =~ /ppc/ && $ENV{DISPLAY}) {
push @choices, { text => _("Xpmac (installation display driver)"), code => sub {
+ #- HACK: re-allowing XFree 3
+ $::force_xf4 = 0;
$card->{server} = "Xpmac";
- $card->{use_xf4} = '';
- }} if $ENV{DISPLAY};
+ $card->{prefer_xf3} = 1;
+ }};
}
+ @choices;
+}
+sub xfree_and_glx_choose {
+ my ($card, $noauto) = @_;
+
+ my @choices = xfree_and_glx_choices($card);
+
+ @choices = $choices[0] if !$::expert && !$noauto;
+
+ my $msg = join("\n\n\n",
+ (grep {$_} map { $_->{more_messages} } @choices),
+ _("Which configuration of XFree do you want to have?"));
#- examine choice of user, beware the list MUST NOT BE REORDERED AS the first item should be the
#- proposed one by DrakX.
- my $tc = $in->ask_from_listf(_("XFree configuration"), formatAlaTeX($msg), sub { translate($_[0]{text}) }, \@choices) or return;
+ my $tc = $in->ask_from_listf(_("XFree configuration"), formatAlaTeX($msg), sub { $_[0]{text} }, \@choices) or return;
#- in case of class discarding, this can help ...
$tc or $tc = $choices[0];
+ log::l("Using $tc->{text}");
$tc->{code} and $tc->{code}();
+}
+
+sub cardConfiguration {
+ my ($card, $noauto, $cardOptions) = @_;
+ $card ||= {};
+
+ #- using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
+ #- error if $force_xf4 && !{driver} || !{driver} && !{server}
+ #- internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} && !{server}
+
+ if ($card->{card_name}) {
+ #- try to get info from given card_name
+ updateCardAccordingName($card, $card->{card_name});
+ undef $card->{card_name} if !$card->{server} && !$card->{driver}; #- bad card_name as we can't find the server
+ }
+
+ if (!$card->{server} && !$card->{driver} && !$noauto) {
+ my @cards = cardConfigurationAuto();
+
+ $card = multi_head_config($noauto, @cards);
+
+ $card->{server} = 'FBDev' if $cardOptions->{allowFB} && !$card->{server} && !$card->{driver};
+ }
+
+ #- take into account current environment in standalone to keep
+ #- the XFree86 version.
+ if ($::isStandalone) {
+ readlink("$::prefix/etc/X11/X") =~ /XFree86/ and $card->{prefer_xf3} = 0;
+ readlink("$::prefix/etc/X11/X") =~ /XF86_/ and $card->{prefer_xf3} = !$force_xf4;
+ }
+
+ #- manage X 3.3.6 or above 4.2.0 specific server or driver.
+ if (!$card->{server} && !$card->{driver}) {
+ undef $card->{card_name};
+
+ my @list = ('server', $cardOptions->{allowFB} ? @Xconfigurator_consts::allservers : @Xconfigurator_consts::allbutfbservers);
+ my $default_server = $card->{prefer_xf3} && $card->{server} || 'server';
+ $card->{server} = $in->ask_from_list(_("X server"), _("Choose a X server"), \@list, $default_server) or return;
+
+ if ($card->{server} eq 'server') {
+ my $fake_card = {};
+ updateCardAccordingName($fake_card, $card->{card_name}) if $card->{card_name};
+ delete $card->{server};
+ $card->{prefer_xf3} = 0;
+ $card->{driver} = $in->ask_from_list(_("X driver"), _("Choose a X driver"),
+ ($cardOptions->{allowFB} ? \@Xconfigurator_consts::alldrivers : \@Xconfigurator_consts::allbutfbdrivers),
+ $card->{driver} || $fake_card->{driver} || $card->{driver}) or return;
+ } else {
+ delete $card->{driver};
+ $card->{prefer_xf3} = 1;
+ }
+ }
+
+ foreach ($card, @{$card->{cards} || []}) {
+ $_->{VideoRam} = 4096, delete $_->{depth} if $_->{driver} eq 'i810';
+ $_->{VideoRam} = 16384, delete $_->{depth} if $_->{Chipset} =~ /PERMEDIA/ && $_->{VideoRam} <= 1024;
+ }
+
+ xfree_and_glx_choose($card, $noauto);
$card->{prog} = install_server($card);
#- check for Matrox G200 PCI cards, disable AGP in such cases, causes black screen else.
- if (member($card->{type}, 'Matrox Millennium 200', 'Matrox Millennium 200', 'Matrox Mystique') && $card->{identifier} !~ /AGP/) {
+ if (member($card->{card_name}, 'Matrox Millennium 200', 'Matrox Millennium 200', 'Matrox Mystique') && $card->{description} !~ /AGP/) {
log::l("disabling AGP mode for Matrox card, as it seems to be a PCI card");
log::l("this is only used for XFree 3.3.6, see /etc/X11/glx.conf");
- substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$prefix/etc/X11/glx.conf";
+ substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$::prefix/etc/X11/glx.conf";
}
- delete $card->{depth}{32} if $card->{type} =~ /S3 Trio3D|SiS/;
- $card->{options}{sw_cursor} = 1 if $card->{type} =~ /S3 Trio3D|SiS 6326/;
+ delete $card->{depth}{32} if $card->{card_name} =~ /S3 Trio3D|SiS/;
+ $card->{options}{sw_cursor} = 1 if $card->{card_name} =~ /S3 Trio3D|SiS 6326/;
$card->{options_xf3}{power_saver} = 1;
$card->{options_xf4}{DPMS} = 'on';
-
- $card->{VideoRam} ||= $in->ask_from_listf_('', _("Select the memory size of your graphics card"),
- sub { $Xconfigurator_consts::VideoRams{$_[0]} },
- [ sort keys %Xconfigurator_consts::VideoRams ]) || return
- if $card->{flags}{needVideoRam};
-
#- hack for ATI Mach64 cards where two options should be used if using Utah-GLX.
- if (member($card->{type}, 'ATI Mach64 Utah', 'ATI Rage Mobility')) {
- $card->{options_xf3}{no_font_cache} = $card->{UTAH_GLX};
- $card->{options_xf3}{no_pixmap_cache} = $card->{UTAH_GLX};
+ if (member($card->{card_name}, 'ATI Mach64 Utah', 'ATI Rage Mobility')) {
+ $card->{options_xf3}{no_font_cache} = $card->{use_UTAH_GLX};
+ $card->{options_xf3}{no_pixmap_cache} = $card->{use_UTAH_GLX};
}
#- hack for SiS cards where an option should be used if using Utah-GLX.
- if (member($card->{type}, 'SiS 6326', 'SiS 630')) {
- $card->{options_xf3}{no_pixmap_cache} = $card->{UTAH_GLX};
+ if (member($card->{card_name}, 'SiS 6326', 'SiS 630')) {
+ $card->{options_xf3}{no_pixmap_cache} = $card->{use_UTAH_GLX};
}
#- 3D acceleration configuration for XFree 4 using DRI, this is enabled by default
#- but for some there is a need to specify VideoRam (else it won't run).
- if ($card->{DRI_GLX}) {
- $card->{flags}{needVideoRam} = 1 if $card->{identifier} =~ /Matrox.* G[245][05]0/;
- ($card->{flags}{needVideoRam}, $card->{VideoRam}) = (1, 16384)
- if member($card->{type}, 'Intel 810', 'Intel 815');
+ if ($card->{use_DRI_GLX}) {
+ $card->{needVideoRam} = 1 if $card->{description} =~ /Matrox.* G[245][05]0/;
+ ($card->{needVideoRam}, $card->{VideoRam}) = (1, 16384)
+ if member($card->{card_name}, 'Intel 810', 'Intel 815');
#- always enable (as a reminder for people using a better AGP mode to change it at their own risk).
$card->{options_xf4}{AGPMode} = '1';
#- hack for ATI Rage 128 card using a bttv or peripheral with PCI bus mastering exchange
#- AND using DRI at the same time.
- if (member($card->{type}, 'ATI Rage 128', 'ATI Rage 128 Mobility')) {
+ if (member($card->{card_name}, 'ATI Rage 128', 'ATI Rage 128 Mobility')) {
$card->{options_xf4}{UseCCEFor2D} = (detect_devices::matching_desc('Bt8[47][89]') ||
detect_devices::matching_desc('TV') ||
detect_devices::matching_desc('AG GMV1')) ? 'true' : 'false';
}
}
+
+ $in->ask_from('', _("Select the memory size of your graphics card"),
+ [ { list => [ sort keys %Xconfigurator_consts::VideoRams ],
+ format => sub { translate($Xconfigurator_consts::VideoRams{$_[0]}) },
+ not_edit => !$::expert } ]) || return
+ if $card->{needVideoRam} && !$card->{VideoRam};
+
+
$card;
}
@@ -422,7 +445,7 @@ sub optionsConfiguration($) {
my %l;
foreach (@Xconfigurator_consts::options) {
- if ($X->{card}{server} eq $_->[1] && $X->{card}{identifier} =~ /$_->[2]/) {
+ if ($X->{card}{server} eq $_->[1] && $X->{card}{description} =~ /$_->[2]/) {
my $options = 'options_' . ($X->{card}{server} eq 'XFree86' ? 'xf4' : 'xf3');
$X->{card}{$options}{$_->[0]} ||= 0;
if (!$l{$_->[0]}) {
@@ -446,11 +469,10 @@ sub monitorConfiguration(;$$) {
log::l("EISA_ID: $monitor->{EISA_ID}");
if (my ($mon) = grep { lc($_->{eisa}) eq $monitor->{EISA_ID} } values %$monitors) {
add2hash($monitor, $mon);
- log::l("EISA_ID corresponds to: $monitor->{type}");
+ log::l("EISA_ID corresponds to: $monitor->{ModelName}");
}
}
if ($monitor->{hsyncrange} && $monitor->{vsyncrange}) {
- add2hash($monitor, { type => "monitor1" });
return $monitor;
}
@@ -472,7 +494,7 @@ that is beyond the capabilities of your monitor: you may damage your monitor.
} else {
add2hash($monitor, $monitors->{$monitor->{type}});
}
- add2hash($monitor, { type => "monitor1", manual => 1 });
+ add2hash($monitor, { manual => 1 });
}
sub finalize_config {
@@ -513,9 +535,9 @@ sub check_config {
#- needed for bad cards not restoring cleanly framebuffer, according to which version of XFree are used.
sub check_bad_card {
my ($card) = @_;
- my $bad_card = $card->{use_xf4} ? $card->{BAD_FB_RESTORE} : $card->{BAD_FB_RESTORE_XF3};
+ my $bad_card = using_xf4($card) ? $card->{BAD_FB_RESTORE} : $card->{BAD_FB_RESTORE_XF3};
$bad_card ||= $card->{driver} eq 'i810' || $card->{driver} eq 'fbdev';
- $bad_card ||= $card->{identifier} =~ /S3.*ViRGE/ if $::live;
+ $bad_card ||= $card->{description} =~ /S3.*ViRGE/ if $::live;
$bad_card ||= $card->{driver} eq 'nvidia' if !$::isStandalone; #- avoid testing during install at any price.
log::l("the graphics card does not like X in framebuffer") if $bad_card;
@@ -528,7 +550,7 @@ sub testFinalConfig {
my $f = "/etc/X11/XF86Config.test";
- eval { write_XF86Config($X, $::testing ? $tmpconfig : "$prefix/$f") };
+ eval { write_XF86Config($X, $::testing ? $tmpconfig : "$::prefix/$f") };
if (my $err = $@) {
$in->ask_warn('', $err);
return;
@@ -540,26 +562,26 @@ sub testFinalConfig {
$in->ask_yesorno(_("Test of the configuration"), _("Do you want to test the configuration?"), 1) or return 1 if !$auto;
- unlink "$prefix/tmp/.X9-lock";
+ unlink "$::prefix/tmp/.X9-lock";
#- create a link from the non-prefixed /tmp/.X11-unix/X9 to the prefixed one
#- that way, you can talk to :9 without doing a chroot
#- but take care of non X11 install :-)
if (-d "/tmp/.X11-unix") {
- symlinkf "$prefix/tmp/.X11-unix/X9", "/tmp/.X11-unix/X9" if $prefix;
+ symlinkf "$::prefix/tmp/.X11-unix/X9", "/tmp/.X11-unix/X9" if $::prefix;
} else {
- symlinkf "$prefix/tmp/.X11-unix", "/tmp/.X11-unix" if $prefix;
+ symlinkf "$::prefix/tmp/.X11-unix", "/tmp/.X11-unix" if $::prefix;
}
#- restart_xfs;
- my $f_err = "$prefix/tmp/Xoutput";
+ my $f_err = "$::prefix/tmp/Xoutput";
my $pid;
unless ($pid = fork) {
system("xauth add :9 . `mcookie`");
open STDERR, ">$f_err";
- chroot $prefix if $prefix;
+ chroot $::prefix if $::prefix;
exec $X->{card}{prog},
- if_($X->{card}{prog} !~ /Xsun/, "-xf86config", ($::testing ? $tmpconfig : $f) . ($X->{card}{use_xf4} && "-4")),
+ if_($X->{card}{prog} !~ /Xsun/, "-xf86config", ($::testing ? $tmpconfig : $f) . (using_xf4($X->{card}) && "-4")),
":9" or c::_exit(0);
}
@@ -571,7 +593,7 @@ sub testFinalConfig {
local $_;
local *F; open F, $f_err;
i: while (<F>) {
- if ($X->{card}{use_xf4}) {
+ if (using_xf4($X->{card})) {
if (/^\(EE\)/ && !/Disabling/ || /^Fatal\b/) {
my @msg = !/error/ && $_ ;
while (<F>) {
@@ -625,8 +647,8 @@ sub testFinalConfig {
my $background = "/usr/share/pixmaps/backgrounds/linux-mandrake/XFdrake-image-test.jpg";
my $qiv = "/usr/bin/qiv";
- -r "} . $prefix . q{/$background" && -x "} . $prefix . q{/$qiv" and
- system(($::testing ? "} . $prefix . q{" : "chroot } . $prefix . q{/ ") . "$qiv -y $background");
+ -r "} . $::prefix . q{/$background" && -x "} . $::prefix . q{/$qiv" and
+ system(($::testing ? "} . $::prefix . q{" : "chroot } . $::prefix . q{/ ") . "$qiv -y $background");
my $in = interactive_gtk->new;
$in->exit($in->ask_yesorno('', [ _("Is this the correct setting?"), $text ], 0) ? 0 : 222);
@@ -634,7 +656,7 @@ sub testFinalConfig {
my $rc = close F;
my $err = $?;
- unlink "/tmp/.X11-unix/X9" if $prefix;
+ unlink "/tmp/.X11-unix/X9" if $::prefix;
kill 2, $pid;
$::noShadow = 0;
@@ -646,12 +668,12 @@ sub allowedDepth($) {
my ($card) = @_;
my %allowed_depth;
- if ($card->{UTAH_GLX} || $card->{DRI_GLX}) {
+ if ($card->{use_UTAH_GLX} || $card->{use_DRI_GLX}) {
$allowed_depth{16} = 1; #- this is the default.
- $card->{identifier} =~ /Voodoo 5/ and $allowed_depth{24} = undef;
- $card->{identifier} =~ /Matrox.* G[245][05]0/ and $allowed_depth{24} = undef;
- $card->{identifier} =~ /Rage 128/ and $allowed_depth{24} = undef;
- $card->{identifier} =~ /Radeon/ and $allowed_depth{24} = undef;
+ $card->{description} =~ /Voodoo 5/ and $allowed_depth{24} = undef;
+ $card->{description} =~ /Matrox.* G[245][05]0/ and $allowed_depth{24} = undef;
+ $card->{description} =~ /Rage 128/ and $allowed_depth{24} = undef;
+ $card->{description} =~ /Radeon/ and $allowed_depth{24} = undef;
}
for ($card->{server}) {
@@ -763,8 +785,8 @@ sub chooseResolutionsGtk($$;$) {
}
gtkadd($W->{window},
gtkpack_($W->create_box_with_title(_("Choose the resolution and the color depth"),
- "(" . ($card->{type} ?
- _("Graphics card: %s", $card->{type}) :
+ "(" . ($card->{card_name} ?
+ _("Graphics card: %s", $card->{card_name}) :
_("XFree86 server: %s", $card->{server})) . ")"
),
1, gtkpack2(new Gtk::VBox(0,0),
@@ -974,10 +996,10 @@ Section "InputDevice"
$pointer->($X->{mouse}{auxmouse}, 2) if $X->{mouse}{auxmouse};
#- write module section for version 3.
- if (@{$X->{wacom}} || $X->{card}{UTAH_GLX}) {
+ if (@{$X->{wacom}} || $X->{card}{use_UTAH_GLX}) {
print F qq(Section "Module"\n);
print F qq( Load "xf86Wacom.so"\n) if @{$X->{wacom}};
- print F qq( Load "glx-3.so"\n) if $X->{card}{UTAH_GLX}; #- glx.so may clash with server version 4.
+ print F qq( Load "glx-3.so"\n) if $X->{card}{use_UTAH_GLX}; #- glx.so may clash with server version 4.
print F qq(EndSection\n\n);
}
@@ -1093,7 +1115,7 @@ Section "Module"
# This loads the DBE extension module.
Load "dbe"
);
- if (!($X->{card}{DRI_GLX} && $X->{card}{driver} eq 'r128')) {
+ if (!($X->{card}{use_DRI_GLX} && $X->{card}{driver} eq 'r128')) {
print G qq(
# This loads the Video for Linux module.
Load "v4l"
@@ -1101,10 +1123,10 @@ Section "Module"
}
#- For example, this loads the NVIDIA GLX extension module.
- #- When DRI_GLX_SPECIAL is set, DRI_GLX is also set
+ #- When DRI_GLX_SPECIAL is set, use_DRI_GLX is also set
if ($X->{card}{DRI_GLX_SPECIAL}) {
print G $X->{card}{DRI_GLX_SPECIAL};
- } elsif ($X->{card}{DRI_GLX}) {
+ } elsif ($X->{card}{use_DRI_GLX}) {
print G qq(
Load "glx"
Load "dri"
@@ -1121,14 +1143,14 @@ Section "DRI"
Mode 0666
EndSection
-) if $X->{card}{DRI_GLX};
+) if $X->{card}{use_DRI_GLX};
#- Write monitor section.
$O = $X->{monitor};
print F qq(\nSection "Monitor"\n);
print G qq(\nSection "Monitor"\n);
- print F qq( Identifier "$O->{type}"\n);
- print G qq( Identifier "$O->{type}"\n);
+ print F qq( Identifier "monitor1"\n);
+ print G qq( Identifier "monitor1"\n);
print F qq( HorizSync $O->{hsyncrange}\n\n);
print G qq( HorizSync $O->{hsyncrange}\n\n);
print F qq( VertRefresh $O->{vsyncrange}\n\n);
@@ -1137,9 +1159,9 @@ EndSection
print G $O->{ModeLines} if $O->{ModeLines};
print F "\nEndSection\n\n\n";
print G "\nEndSection\n\n\n";
- foreach (2..@{$X->{card}{cards} || []}) {
+ foreach (1..@{$X->{card}{cards} || []}) {
print G qq(Section "Monitor"\n);
- print G qq( Identifier "monitor$_"\n);
+ print G qq( Identifier "monitor), $_+1, qq("\n);
print G qq( HorizSync $O->{hsyncrange}\n);
print G qq( VertRefresh $O->{vsyncrange}\n);
print G qq(EndSection\n\n\n);
@@ -1149,19 +1171,16 @@ EndSection
$O = $X->{card};
print F $Xconfigurator_consts::devicesection_text;
print F qq(Section "Device"\n);
- print F qq( Identifier "$O->{type}"\n);
+ print F qq( Identifier "device1"\n);
+ print F qq( VendorName "$O->{VendorName}"\n) if $O->{VendorName};
+ print F qq( BoardName "$O->{BoardName}"\n) if $O->{BoardName};
print F qq( Chipset "$O->{Chipset}"\n) if $O->{Chipset};
- print F "#" if $O->{VideoRam} && !$O->{flags}{needVideoRam};
+ print F "#" if $O->{VideoRam} && !$O->{needVideoRam};
print F " VideoRam $O->{VideoRam}\n" if $O->{VideoRam};
print F map { " $_\n" } @{$O->{lines} || []};
- #- Obsolete stuff, no existing card still need this
- print F qq( Ramdac "$O->{Ramdac}"\n) if $O->{Ramdac};
- print F qq( Dacspeed "$O->{Dacspeed}"\n) if $O->{Dacspeed};
- print F qq( Clockchip "$O->{Clockchip}"\n) if $O->{Clockchip};
-
print F qq(
# Uncomment following option if you see a big white block
@@ -1182,19 +1201,16 @@ EndSection
print F "EndSection\n\n\n";
#- configure all drivers here!
- foreach (@{$O->{cards} || [ $O ]}) {
+ each_index {
print G qq(Section "Device"\n);
- print G qq( Identifier "$_->{type}"\n);
+ print G qq( Identifier "device), $::i+1, qq("\n);
+ print G qq( VendorName "$_->{VendorName}"\n) if $_->{VendorName};
+ print G qq( BoardName "$_->{BoardName}"\n) if $_->{BoardName};
print G qq( Driver "$_->{driver}"\n);
- print G "#" if $_->{VideoRam} && !$_->{flags}{needVideoRam};
+ print G "#" if $_->{VideoRam} && !$_->{needVideoRam};
print G " VideoRam $_->{VideoRam}\n" if $_->{VideoRam};
print G map { " $_\n" } @{$_->{lines} || []};
- #- Obsolete stuff, no existing card still need this
- print G qq( Ramdac "$_->{Ramdac}"\n) if $_->{Ramdac};
- print G qq( Dacspeed "$_->{Dacspeed}"\n) if $_->{Dacspeed};
- print G qq( Clockchip "$_->{clockchip}"\n) if $_->{clockchip};
-
print G qq(
# Uncomment following option if you see a big white block
@@ -1210,7 +1226,7 @@ EndSection
print G qq( Option "UseFBDev"\n);
}
print G "EndSection\n\n\n";
- }
+ } $O, @{$O->{cards} || []};
my $subscreen = sub {
my ($f, $server, $defdepth, $depths) = @_;
@@ -1233,35 +1249,26 @@ EndSection
Section "Screen"
Driver "$server"
Device "$device"
- Monitor "$X->{monitor}{type}"
+ Monitor "monitor1"
); #-"
$subscreen->(*F, $server, $defdepth, $depths);
};
- &$screen("svga", $X->{default_depth}, $O->{type}, $O->{depth})
+ &$screen("svga", $X->{default_depth}, 'device0', $O->{depth})
if $O->{server} eq 'SVGA';
- &$screen("accel", $X->{default_depth}, $O->{type}, $O->{depth})
+ &$screen("accel", $X->{default_depth}, 'device0', $O->{depth})
if $Xconfigurator_consts::serversdriver{$O->{server}} eq 'accel';
- &$screen("fbdev", $X->{default_depth}, $O->{type}, $O->{depth});
+ &$screen("fbdev", $X->{default_depth}, 'device0', $O->{depth});
&$screen("vga16", '', "Generic VGA", { '' => [[ 640, 480 ], [ 800, 600 ]]});
- print G qq(
-Section "Screen"
- Identifier "screen1"
- Device "$O->{type}"
- Monitor "$X->{monitor}{type}"
-);
- #- bpp 32 not handled by XF4
- $subscreen->(*G, "svga", min($X->{default_depth}, 24), $O->{depth});
- foreach (2..@{$O->{cards} || []}) {
- my $device = $O->{cards}[$_ - 1]{type};
+ foreach (1 .. 1 + @{$O->{cards} || []}) {
print G qq(
Section "Screen"
Identifier "screen$_"
- Device "$device"
+ Device "device$_"
Monitor "monitor$_"
);
#- bpp 32 not handled by XF4
@@ -1274,8 +1281,8 @@ Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
);
- foreach (2..@{$O->{cards} || []}) {
- my ($curr, $prev) = ($_, $_ - 1);
+ foreach (1..@{$O->{cards} || []}) {
+ my ($curr, $prev) = ($_ + 1, $_);
print G qq( Screen "screen$curr" RightOf "screen$prev"\n);
}
print G '#' if defined $O->{Xinerama} && !$O->{Xinerama};
@@ -1305,11 +1312,11 @@ sub show_info {
#- Program entry point.
sub main {
- ($prefix, my $X, $in, $do_pkgs, my $cardOptions) = @_;
+ (my $X, $in, $do_pkgs, my $cardOptions) = @_;
$X ||= {};
- Xconfig::XF86check_link($prefix, '');
- Xconfig::XF86check_link($prefix, '-4');
+ Xconfig::XF86check_link($::prefix, '');
+ Xconfig::XF86check_link($::prefix, '-4');
{
my $w = $in->wait_message('', _("Preparing X-Window configuration"), 1);
@@ -1360,13 +1367,13 @@ The current configuration is:
}
if ($ok) {
if (!$::testing) {
- my $f = "$prefix/etc/X11/XF86Config";
+ my $f = "$::prefix/etc/X11/XF86Config";
if (-e "$f.test") {
rename $f, "$f.old" or die "unable to make a backup of XF86Config";
rename "$f-4", "$f-4.old";
rename "$f.test", $f;
rename "$f.test-4", "$f-4";
- symlinkf "../..$X->{card}{prog}", "$prefix/etc/X11/X" if $X->{card}{server} !~ /Xpmac/;
+ symlinkf "../..$X->{card}{prog}", "$::prefix/etc/X11/X" if $X->{card}{server} !~ /Xpmac/;
}
}
@@ -1375,7 +1382,7 @@ The current configuration is:
my $run = exists $X->{xdm} ? $X->{xdm} : $::auto || $in->ask_yesorno(_("Graphical interface at startup"),
_("I can setup your computer to automatically start the graphical interface (XFree) upon booting.
Would you like XFree to start when you reboot?"), 1);
- any::runlevel($prefix, $run ? 5 : 3) if !$::testing;
+ any::runlevel($::prefix, $run ? 5 : 3) if !$::testing;
}
if ($::isStandalone && $in->isa('interactive_gtk')) {
if (my $wm = any::running_window_manager()) {