summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po')
-rw-r--r--perl-install/share/po/DrakX.pot2310
1 files changed, 2310 insertions, 0 deletions
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
new file mode 100644
index 000000000..9ecc97e38
--- /dev/null
+++ b/perl-install/share/po/DrakX.pot
@@ -0,0 +1,2310 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 1999-10-13 00:04+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: ENCODING\n"
+
+#: ../Xconfigurator.pm_.c:164
+msgid "Select a graphic card"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:165
+msgid "Choose a X server"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:184
+msgid "Select the memory size of your graphic card"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:197
+msgid "Choose a monitor"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:200
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:207
+msgid "Horizontal refresh rate"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:207
+msgid "Vertical refresh rate"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:246
+msgid "Monitor not configured"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:249
+msgid "Graphic card not configured yet"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:252
+msgid "Resolutions not chosen yet"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:259
+msgid "Do you want to test the configuration?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:259
+msgid "Test configuration"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:289
+msgid "An error occurred:"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:291
+msgid ""
+"\n"
+"try changing some parameters"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:312
+#, c-format
+msgid "(leaving in %d seconds)"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:316 ../my_gtk.pm_.c:348
+msgid "Is this correct?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:324
+msgid "An error occurred, try changing some parameters"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:332 ../Xconfigurator.pm_.c:481
+msgid "Automatic resolutions"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:333
+msgid ""
+"To find the available resolutions I will try different ones.\n"
+"Your screen will blink...\n"
+"You can switch if off if you want, you'll hear a beep when it's over"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:380 ../install_steps_interactive.pm_.c:450
+#: ../install_steps_interactive.pm_.c:451
+msgid "Resolution"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:414
+msgid "Choose resolution and color depth"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:422
+msgid "Show all"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:482
+msgid ""
+"I can try to find the available resolutions (eg: 800x600).\n"
+"Sometimes, though, it may hang the machine.\n"
+"Do you want to try?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:487
+msgid ""
+"No valid modes found\n"
+"Try with another video card or monitor"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:672
+#, c-format
+msgid "Keyboard layout: %s\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:673
+#, c-format
+msgid "Mouse type: %s\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:674
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:675
+#, c-format
+msgid "Monitor: %s\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:676
+#, c-format
+msgid "Monitor HorizSync: %s\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:677
+#, c-format
+msgid "Monitor VertRefresh: %s\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:678
+#, c-format
+msgid "Graphic card: %s\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:679
+#, c-format
+msgid "Graphic memory: %s kB\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:680
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:705
+msgid "Change Monitor"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:706
+msgid "Change Graphic card"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:707
+msgid "Change Resolution"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:708
+msgid "Automatical resolutions search"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:712
+msgid "Show information"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:713
+msgid "Test again"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:714
+msgid "Quit"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:717
+msgid "What do you want to do?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:722
+msgid "X at startup"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:723
+msgid ""
+"I can set up your computer to automatically start X upon booting.\n"
+"Would you like X to start when you reboot?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:728
+msgid "X successfully configured"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:729
+msgid ""
+"Configuration file has been written. Take a look at it before running "
+"'startx'.\n"
+"Within the server, press Ctrl, Alt and '+' simultaneously to cycle through "
+"video resolutions.\n"
+"Pressing Ctrl, Alt and Backspace simultaneously immediately exits the "
+"server\n"
+"For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config."
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:4
+msgid "256 colors"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:5
+msgid "32 thousand colors"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:6
+msgid "65 thousand colors"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:7
+msgid "16 million colors"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:8
+msgid "4 billion colors"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:57
+msgid "256 kB"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:58
+msgid "512 kB"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:59
+msgid "1 MB"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:60
+msgid "2 MB"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:61
+msgid "4 MB"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:62
+msgid "8 MB"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:63
+msgid "16 MB or more"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:67 ../Xconfigurator_consts.pm_.c:68
+msgid "Standard VGA, 640x480 at 60 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:69
+msgid "Super VGA, 800x600 at 56 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:70
+msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:71
+msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:72
+msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:73
+msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:74
+msgid "High Frequency SVGA, 1024x768 at 70 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:75
+msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:76
+msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:77
+msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:78
+msgid "Monitor that can do 1600x1200 at 70 Hz"
+msgstr ""
+
+#: ../Xconfigurator_consts.pm_.c:79
+msgid "Monitor that can do 1600x1200 at 76 Hz"
+msgstr ""
+
+#: ../diskdrake.pm_.c:15
+msgid "Create"
+msgstr ""
+
+#: ../diskdrake.pm_.c:16
+msgid "Unmount"
+msgstr ""
+
+#: ../diskdrake.pm_.c:17
+msgid "Delete"
+msgstr ""
+
+#: ../diskdrake.pm_.c:17
+msgid "Format"
+msgstr ""
+
+#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:376
+msgid "Move"
+msgstr ""
+
+#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:434
+msgid "Resize"
+msgstr ""
+
+#: ../diskdrake.pm_.c:17
+msgid "Type"
+msgstr ""
+
+#: ../diskdrake.pm_.c:18
+msgid "Mount_point"
+msgstr ""
+
+#: ../diskdrake.pm_.c:32
+msgid "Write /etc/fstab"
+msgstr ""
+
+#: ../diskdrake.pm_.c:33
+msgid "Normal > Expert"
+msgstr ""
+
+#: ../diskdrake.pm_.c:34
+msgid "Expert > Normal"
+msgstr ""
+
+#: ../diskdrake.pm_.c:35
+msgid "Restore from file"
+msgstr ""
+
+#: ../diskdrake.pm_.c:36
+msgid "Save in file"
+msgstr ""
+
+#: ../diskdrake.pm_.c:37
+msgid "Restore from floppy"
+msgstr ""
+
+#: ../diskdrake.pm_.c:38
+msgid "Save on floppy"
+msgstr ""
+
+#: ../diskdrake.pm_.c:39 ../install_steps_interactive.pm_.c:533
+#: ../install_steps_interactive.pm_.c:642
+msgid "Done"
+msgstr ""
+
+#: ../diskdrake.pm_.c:42
+msgid "Clear all"
+msgstr ""
+
+#: ../diskdrake.pm_.c:43
+msgid "Format all"
+msgstr ""
+
+#: ../diskdrake.pm_.c:44
+msgid "Auto allocate"
+msgstr ""
+
+#: ../diskdrake.pm_.c:47
+msgid "All primary partitions are used"
+msgstr ""
+
+#: ../diskdrake.pm_.c:47
+msgid "I can't add any more partition"
+msgstr ""
+
+#: ../diskdrake.pm_.c:47
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+
+#: ../diskdrake.pm_.c:50
+msgid "Rescue partition table"
+msgstr ""
+
+#: ../diskdrake.pm_.c:51
+msgid "Undo"
+msgstr ""
+
+#: ../diskdrake.pm_.c:52
+msgid "Write partition table"
+msgstr ""
+
+#: ../diskdrake.pm_.c:94
+msgid "Details"
+msgstr ""
+
+#: ../diskdrake.pm_.c:98
+msgid "Legend"
+msgstr ""
+
+#: ../diskdrake.pm_.c:100
+msgid "Empty"
+msgstr ""
+
+#: ../diskdrake.pm_.c:100
+msgid "Ext2"
+msgstr ""
+
+#: ../diskdrake.pm_.c:100
+msgid "FAT"
+msgstr ""
+
+#: ../diskdrake.pm_.c:100
+msgid "Other"
+msgstr ""
+
+#: ../diskdrake.pm_.c:100
+msgid "Swap"
+msgstr ""
+
+#: ../diskdrake.pm_.c:120
+#, c-format
+msgid "After %s partition %s,"
+msgstr ""
+
+#: ../diskdrake.pm_.c:120 ../diskdrake.pm_.c:367 ../diskdrake.pm_.c:394
+msgid "Read carefully!"
+msgstr ""
+
+#: ../diskdrake.pm_.c:120
+msgid "all data on this partition will be lost"
+msgstr ""
+
+#: ../diskdrake.pm_.c:138 ../install_any.pm_.c:177 ../install_steps.pm_.c:67
+#: ../install_steps_interactive.pm_.c:37
+msgid "Error"
+msgstr ""
+
+#: ../diskdrake.pm_.c:159 ../diskdrake.pm_.c:511
+msgid "Mount point: "
+msgstr ""
+
+#: ../diskdrake.pm_.c:160 ../diskdrake.pm_.c:182
+msgid "Device: "
+msgstr ""
+
+#: ../diskdrake.pm_.c:161
+#, c-format
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:162 ../diskdrake.pm_.c:185
+msgid "Type: "
+msgstr ""
+
+#: ../diskdrake.pm_.c:163
+#, c-format
+msgid "Start: sector /*%s\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:164
+msgid "Size: %s MB (%s%%)"
+msgstr ""
+
+#: ../diskdrake.pm_.c:165
+#, c-format
+msgid ", %s sectors"
+msgstr ""
+
+#: ../diskdrake.pm_.c:167
+#, c-format
+msgid "Cylinder %d to cylinder %d\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:168
+msgid "Formatted\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:169
+msgid "Not formatted\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:170
+msgid "Mounted\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:171
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:183
+#, c-format
+msgid "Size: %d MB\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:184
+#, c-format
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:186
+#, c-format
+msgid "on bus %d id %d\n"
+msgstr ""
+
+#: ../diskdrake.pm_.c:198
+msgid "Mount"
+msgstr ""
+
+#: ../diskdrake.pm_.c:200
+msgid "Active"
+msgstr ""
+
+#: ../diskdrake.pm_.c:289
+msgid ""
+"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
+"1024).\n"
+"Either you use LILO and it won't work, or you don't use LILO and you don't "
+"need /boot"
+msgstr ""
+
+#: ../diskdrake.pm_.c:293
+msgid ""
+"The partition you've selected to add as root (/) is physically located "
+"beyond\n"
+"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
+"If you plan to use the LILO boot manager, be careful to add a /boot partition"
+msgstr ""
+
+#: ../diskdrake.pm_.c:307
+msgid "Quit without saving"
+msgstr ""
+
+#: ../diskdrake.pm_.c:307
+msgid "Quit without writing the partition table?"
+msgstr ""
+
+#: ../diskdrake.pm_.c:322
+msgid "changing type of"
+msgstr ""
+
+#: ../diskdrake.pm_.c:324
+msgid "Change partition type"
+msgstr ""
+
+#: ../diskdrake.pm_.c:325
+msgid "Which partition type do you want?"
+msgstr ""
+
+#: ../diskdrake.pm_.c:339
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr ""
+
+#: ../diskdrake.pm_.c:340
+msgid "Mount point"
+msgstr ""
+
+#: ../diskdrake.pm_.c:361
+msgid "formatting"
+msgstr ""
+
+#: ../diskdrake.pm_.c:367
+msgid "After formatting all partitions,"
+msgstr ""
+
+#: ../diskdrake.pm_.c:367
+msgid "all data on these partitions will be lost"
+msgstr ""
+
+#: ../diskdrake.pm_.c:377
+msgid "Which disk do you want to move to?"
+msgstr ""
+
+#: ../diskdrake.pm_.c:381
+msgid "Sector"
+msgstr ""
+
+#: ../diskdrake.pm_.c:382
+msgid "Which sector do you want to move to?"
+msgstr ""
+
+#: ../diskdrake.pm_.c:385
+msgid "Moving"
+msgstr ""
+
+#: ../diskdrake.pm_.c:385
+msgid "Moving partition..."
+msgstr ""
+
+#: ../diskdrake.pm_.c:394
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr ""
+
+#: ../diskdrake.pm_.c:396
+msgid "You'll need to reboot before the modification can take place"
+msgstr ""
+
+#: ../diskdrake.pm_.c:417
+msgid "Computing fat filesystem bounds"
+msgstr ""
+
+#: ../diskdrake.pm_.c:417 ../diskdrake.pm_.c:462
+msgid "Resizing"
+msgstr ""
+
+#: ../diskdrake.pm_.c:431
+msgid "resizing"
+msgstr ""
+
+#: ../diskdrake.pm_.c:441
+msgid "Choose the new size"
+msgstr ""
+
+#: ../diskdrake.pm_.c:441 ../install_steps_graphical.pm_.c:303
+msgid "MB"
+msgstr ""
+
+#: ../diskdrake.pm_.c:488
+msgid "Create a new partition"
+msgstr ""
+
+#: ../diskdrake.pm_.c:504
+msgid "Start sector: "
+msgstr ""
+
+#: ../diskdrake.pm_.c:507
+msgid "Size in MB: "
+msgstr ""
+
+#: ../diskdrake.pm_.c:510
+msgid "Filesystem type: "
+msgstr ""
+
+#: ../diskdrake.pm_.c:512
+msgid "Preference: "
+msgstr ""
+
+#: ../diskdrake.pm_.c:554 ../diskdrake.pm_.c:570
+msgid "Select file"
+msgstr ""
+
+#: ../diskdrake.pm_.c:563
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+
+#: ../diskdrake.pm_.c:571
+msgid "Warning"
+msgstr ""
+
+#: ../diskdrake.pm_.c:572
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+
+#: ../diskdrake.pm_.c:586
+msgid "Trying to rescue partition table"
+msgstr ""
+
+#: ../fs.pm_.c:67 ../fs.pm_.c:73
+#, c-format
+msgid "%s formatting of %s failed"
+msgstr ""
+
+#: ../fs.pm_.c:92
+#, c-format
+msgid "don't know how to format %s in type %s"
+msgstr ""
+
+#: ../fs.pm_.c:105
+msgid "nfs mount failed"
+msgstr ""
+
+#: ../fs.pm_.c:122
+msgid "mount failed: "
+msgstr ""
+
+#: ../fs.pm_.c:133
+#, c-format
+msgid "error unmounting %s: %s"
+msgstr ""
+
+#: ../fsedit.pm_.c:162
+msgid "Mount points must begin with a leading /"
+msgstr ""
+
+#: ../fsedit.pm_.c:165
+#, c-format
+msgid "There is already a partition with mount point %s"
+msgstr ""
+
+#: ../fsedit.pm_.c:294
+#, c-format
+msgid "Error opening %s for writing: %s"
+msgstr ""
+
+#: ../fsedit.pm_.c:363
+msgid ""
+"An error has occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+
+#: ../fsedit.pm_.c:378
+msgid "You don't have any partitions!"
+msgstr ""
+
+#: ../help.pm_.c:7 ../help.pm_.c:238
+msgid "Choose preferred language for install and system usage."
+msgstr ""
+
+#: ../help.pm_.c:10 ../help.pm_.c:241
+msgid "Choose the layout corresponding to your keyboard from the list above"
+msgstr ""
+
+#: ../help.pm_.c:13 ../help.pm_.c:244
+msgid ""
+"Choose \"Installation\" if there are no previous versions of Linux\n"
+"installed, or if you wish use to multiple distributions or versions.\n"
+"\n"
+"\n"
+"Choose \"Update\" if you wish to update a previous version of Mandrake\n"
+"Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."
+msgstr ""
+
+#: ../help.pm_.c:21 ../help.pm_.c:252
+msgid ""
+"Select:\n"
+"\n"
+" - Beginner: If you have never installed Linux before, and wish to\n"
+"install the distribution elected \"Product of the year\" for 1999,\n"
+"click here.\n"
+"\n"
+" - Developer: If you are familiar with Linux and will be using the\n"
+"computer primarily for software development, you will find happiness\n"
+"here.\n"
+"\n"
+" - Server: If you wish to install a general purpose server, or the\n"
+"Linux distribution elected \"Distribution/Server\" for 1999, select\n"
+"this.\n"
+"\n"
+" - Expert: If you are fluent with GNU/Linux and want to perform\n"
+"a highly customized installation, this Install Class is for you."
+msgstr ""
+
+#: ../help.pm_.c:39 ../help.pm_.c:270
+msgid ""
+"DrakX will attempt at first to look for one or more PCI\n"
+"SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
+"to use, it will insert it (them) automatically.\n"
+"\n"
+"If your SCSI adapter is ISA, or is PCI but DrakX doesn't know\n"
+"which driver to use for this card, or if you have no SCSI adapters\n"
+"at all, you will then be prompted on whether you have one or not.\n"
+"If you have none, answer \"No\". If you have one or more, answer\n"
+"\"Yes\". A list of drivers will then pop up, from which you will\n"
+"have to select one.\n"
+"\n"
+"After you have selected the driver, DrakX will ask if you\n"
+"want to specify options for it. First, try and let the driver\n"
+"probe for the hardware: it usually works fine.\n"
+"\n"
+"If not, do not forget the information on your hardware that you\n"
+"could get from Windows (if you have it on your system), as\n"
+"suggested by the installation guide. These are the options\n"
+"you will need to provide to the driver."
+msgstr ""
+
+#: ../help.pm_.c:60 ../help.pm_.c:291
+msgid ""
+"At this point, hard drive partitions must be defined. (Unless you\n"
+"are overwriting a previous install of Linux and have already defined\n"
+"your hard drive partitions as desired.) This operation consists of\n"
+"logically dividing the computer's hard drive capacity into separate\n"
+"areas for use.\n"
+"\n"
+"\n"
+"Two common partition are: the root partition (/), which is the starting\n"
+"point of the filesystem's directory hierarchy, and /boot, which contains\n"
+"all files necessary to start the operating system when the\n"
+"computer is first turned on.\n"
+"\n"
+"\n"
+"Because the effects of this process are usually irreversible, partitioning\n"
+"can be intimidating and stressful to the unexperienced. DiskDrake\n"
+"simplifies the process so that it need not be. Consult the documentation\n"
+"and take your time before proceeding."
+msgstr ""
+
+#: ../help.pm_.c:79 ../help.pm_.c:310
+msgid ""
+"Any partitions that have been newly defined must be formatted for\n"
+"use (formatting meaning creating a filesystem). At this time, you may\n"
+"wish to re-format some already existing partitions to erase the data\n"
+"they contain. Note: it is not necessary to re-format pre-existing\n"
+"partitions, particularly if they contain files or data you wish to keep.\n"
+"Typically retained are /home and /usr/local."
+msgstr ""
+
+#: ../help.pm_.c:87 ../help.pm_.c:318
+msgid ""
+"You may now select the packages you wish to install.\n"
+"\n"
+"\n"
+"Please note that some packages require the installation of others.\n"
+"These are referred to as package dependencies. The packages you select,\n"
+"and the packages they require will be automatically selected for\n"
+"install. It is impossible to install a package without installing all\n"
+"of its dependencies.\n"
+"\n"
+"\n"
+"Information on each category and specific package is available in the\n"
+"area titled \"Info\", located between list of packages and the five\n"
+"buttons \"Go\", \"Select more/less\" and \"Show more/less\"."
+msgstr ""
+
+#: ../help.pm_.c:102 ../help.pm_.c:333
+msgid ""
+"The packages selected are now being installed. This operation\n"
+"should only take a few minutes."
+msgstr ""
+
+#: ../help.pm_.c:106 ../help.pm_.c:337
+msgid ""
+"If DrakX failed to find your mouse, or if you want to\n"
+"check what it has done, you will be presented the list of mice\n"
+"above.\n"
+"\n"
+"\n"
+"If you agree with DrakX' settings, just jump to the section\n"
+"you want by clicking on it in the menu on the left. Otherwise,\n"
+"choose a mouse type in the menu which you think is the closest\n"
+"match for your mouse.\n"
+"\n"
+"In case of a serial mouse, you will also have to tell DrakX\n"
+"which serial port it is connected to."
+msgstr ""
+
+#: ../help.pm_.c:120 ../help.pm_.c:351
+msgid ""
+"This section is dedicated to configuring a local area network,\n"
+"or LAN. If you answer \"Yes\" here, DrakX will try to find an\n"
+"Ethernet adapter on your machine. PCI adapters should be found and\n"
+"initialized automatically. However, if your peripheral is ISA,\n"
+"autodetection will not work, and you will have to choose a driver\n"
+"from the list that will appear then.\n"
+"\n"
+"\n"
+"As for SCSI adapters, you can let the driver probe for the adapter\n"
+"in the first time, otherwise you will have to specify the options\n"
+"to the driver that you will have fetched from Windows' control\n"
+"panel.\n"
+"\n"
+"\n"
+"If you install a Linux-Mandrake system on a machine which is part\n"
+"of an already existing network, the network administrator will\n"
+"have given you all necessary information (IP address, network\n"
+"submask or netmask for short, and hostname). If you're setting\n"
+"up a private network at home for example, you should choose\n"
+"addresses "
+msgstr ""
+
+#: ../help.pm_.c:142 ../help.pm_.c:145 ../help.pm_.c:232 ../help.pm_.c:373
+#: ../help.pm_.c:376 ../help.pm_.c:463 ../install2.pm_.c:65
+msgid "Help"
+msgstr ""
+
+#: ../help.pm_.c:148
+msgid ""
+"Linux can deal with many types of printer. Each of these\n"
+"types require a different setup.\n"
+"\n"
+"\n"
+"If your printer is directly connected to your computer, select\n"
+"\"Local printer\". You will then have to tell which port your\n"
+"printer is connected to, and select the appropriate filter.\n"
+"\n"
+"\n"
+"If you want to access a printer located on a remote Unix machine,\n"
+"you will have to select \"Remote lpd queue\". In order to make\n"
+"it work, no username or password is required, but you will need\n"
+"to know the name of the printing queue on this server.\n"
+"\n"
+"\n"
+"If you want to access a SMB printer (which means, a printer located\n"
+"on a remote Windows 9x/NT machine), you will have to specify its\n"
+"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
+"plus the username, workgroup and password required in order to\n"
+"access the printer, and of course the name of the printer. The same goes\n"
+"for a NetWare printer, except that you need no workgroup information."
+msgstr ""
+
+#: ../help.pm_.c:171 ../help.pm_.c:402
+msgid ""
+"You must now enter the root password for your Linux-Mandrake\n"
+"system. The password must be entered twice to verify that both\n"
+"password entries are identical.\n"
+"\n"
+"\n"
+"Root is the administrator of the system, and is the only user\n"
+"allowed to modify the system configuration. Therefore, choose\n"
+"this password carefully! Unauthorized use of the root account can\n"
+"be extremely dangerous to the integrity of the system and its data,\n"
+"and other systems connected to it. The password should be a\n"
+"mixture of alphanumeric characters and a least 8 characters long. It\n"
+"should *never* be written down. Do not make the password too long or\n"
+"complicated, though: you must be able to remember without too much\n"
+"effort."
+msgstr ""
+
+#: ../help.pm_.c:187 ../help.pm_.c:418
+msgid ""
+"You may now create one or more \"regular\" user account(s), as\n"
+"opposed to the \"priviledged\" user account, root. You can create\n"
+"one or more account(s) for each person you want to allow to use\n"
+"the computer. Note that each user account will have its own\n"
+"preferences (graphical environment, program settings, etc.)\n"
+"and its own \"home directory\", in which these preferences are\n"
+"stored.\n"
+"\n"
+"\n"
+"First of all, create an account for yourself! Even if you will be the only "
+"user\n"
+"of the machine, you may NOT connect as root for daily use of the system: "
+"it's a\n"
+"very high security risk. Making the system unusable is very often a typo "
+"away.\n"
+"\n"
+"\n"
+"Therefore, you should connect to the system using the user account\n"
+"you will have created here, and login as root only for administration\n"
+"and maintenance purposes."
+msgstr ""
+
+#: ../help.pm_.c:206 ../help.pm_.c:437
+msgid ""
+"Please, please, answer \"Yes\" here! Just for example, when you\n"
+"reinstall Windows, it will overwrite the boot sector. Unless you have\n"
+"made the bootdisk as suggested, you won't be able to boot into Linux\n"
+"any more!"
+msgstr ""
+
+#: ../help.pm_.c:212 ../help.pm_.c:443
+msgid ""
+"You need to indicate where you wish\n"
+"to place the information required to boot to Linux.\n"
+"\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of\n"
+"drive (MBR)\"."
+msgstr ""
+
+#: ../help.pm_.c:220 ../help.pm_.c:451
+msgid ""
+"Now it's time to configure the X Window System, which is the\n"
+"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
+"you must configure your video card and monitor. Most of these\n"
+"steps are automated, though, therefore your work may only consist\n"
+"of verifying what has been done and accept the settings :)\n"
+"\n"
+"When the configuration is over, X will be started (unless you\n"
+"ask DrakX not to) so that you can check and see if the\n"
+"settings suit you. If they don't, you can come back and\n"
+"change them, as many times as necessary."
+msgstr ""
+
+#: ../help.pm_.c:379
+msgid ""
+"Linux can deal with many types of printer. Each of these\n"
+"types require a different setup.\n"
+"\n"
+"\n"
+"If your printer is directly connected to your computer, select\n"
+"\"Local printer\". You will then have to tell which port your\n"
+"printer is connected to, and select the appropriate filter.\n"
+"\n"
+"\n"
+"If you want to access a printer located on a remote Unix machine,\n"
+"you will have to select \"Remote lpd queue\". In order to make\n"
+"it work, no username or password is required, but you will need\n"
+"to know the name of the printing queue on this server.\n"
+"\n"
+"\n"
+"If you want to access a SMB printer (which means, a printer located\n"
+"on a remote Windows 9x/NT machine), you will have to specify its\n"
+"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
+"plus the username, workgroup and password required in order to\n"
+"access the printer, and of course the name of the printer.The same goes\n"
+"for a NetWare printer, except that you need no workgroup information."
+msgstr ""
+
+#: ../install2.pm_.c:39
+msgid "Choose your language"
+msgstr ""
+
+#: ../install2.pm_.c:40
+msgid "Select installation class"
+msgstr ""
+
+#: ../install2.pm_.c:41
+msgid "Setup SCSI"
+msgstr ""
+
+#: ../install2.pm_.c:42
+msgid "Choose install or upgrade"
+msgstr ""
+
+#: ../install2.pm_.c:43
+msgid "Configure mouse"
+msgstr ""
+
+#: ../install2.pm_.c:44
+msgid "Choose your keyboard"
+msgstr ""
+
+#: ../install2.pm_.c:45
+msgid "Setup filesystems"
+msgstr ""
+
+#: ../install2.pm_.c:46
+msgid "Format partitions"
+msgstr ""
+
+#: ../install2.pm_.c:47
+msgid "Choose packages to install"
+msgstr ""
+
+#: ../install2.pm_.c:48
+msgid "Install system"
+msgstr ""
+
+#: ../install2.pm_.c:49
+msgid "Configure networking"
+msgstr ""
+
+#: ../install2.pm_.c:50
+msgid "Configure timezone"
+msgstr ""
+
+#: ../install2.pm_.c:52
+msgid "Configure printer"
+msgstr ""
+
+#: ../install2.pm_.c:53 ../install_steps_interactive.pm_.c:508
+#: ../install_steps_interactive.pm_.c:509
+msgid "Set root password"
+msgstr ""
+
+#: ../install2.pm_.c:54
+msgid "Add a user"
+msgstr ""
+
+#: ../install2.pm_.c:55
+msgid "Create a bootdisk"
+msgstr ""
+
+#: ../install2.pm_.c:56
+msgid "Install bootloader"
+msgstr ""
+
+#: ../install2.pm_.c:57
+msgid "Configure X"
+msgstr ""
+
+#: ../install2.pm_.c:58
+msgid "Exit install"
+msgstr ""
+
+#: ../install2.pm_.c:80
+msgid "beginner"
+msgstr ""
+
+#: ../install2.pm_.c:80
+msgid "developer"
+msgstr ""
+
+#: ../install2.pm_.c:80
+msgid "expert"
+msgstr ""
+
+#: ../install2.pm_.c:80
+msgid "server"
+msgstr ""
+
+#: ../install2.pm_.c:292
+msgid "Partitioning failed: no root filesystem"
+msgstr ""
+
+#: ../install2.pm_.c:457
+msgid "Error reading file $f"
+msgstr ""
+
+#: ../install2.pm_.c:462
+#, c-format
+msgid "Bad kickstart file %s (failed %s)"
+msgstr ""
+
+#: ../install_any.pm_.c:178
+msgid ""
+"I can't read your partition table, it's too corrupted for me :(\n"
+"I'll try to go on blanking bad partitions"
+msgstr ""
+
+#: ../install_any.pm_.c:193
+msgid ""
+"DiskDrake failed to read correctly the partition table.\n"
+"Continue at your own risk!"
+msgstr ""
+
+#: ../install_any.pm_.c:232
+msgid "Information"
+msgstr ""
+
+#: ../install_any.pm_.c:233
+#, c-format
+msgid "%s: This is not a root partition, please select another one."
+msgstr ""
+
+#: ../install_any.pm_.c:235
+msgid "No root partition found"
+msgstr ""
+
+#: ../install_steps.pm_.c:68
+msgid ""
+"An error occurred, but I don't know how to handle it nicely,\n"
+"so continue at your own risk :("
+msgstr ""
+
+#: ../install_steps.pm_.c:123
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr ""
+
+#: ../install_steps.pm_.c:316
+msgid "No floppy drive available"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:256
+msgid "You must have a swap partition"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:259
+msgid ""
+"You don't have a swap partition\n"
+"Continue anyway?"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:303
+msgid "Total size: "
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:313
+#, c-format
+msgid "Version: %s\n"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:314
+#, c-format
+msgid "Size: %d KB\n"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:315
+#, c-format
+msgid ""
+"Summary: %s\n"
+"\n"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:404
+msgid "Choose the packages you want to install"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:407
+msgid "Info"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:415
+msgid "Go"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:416
+msgid "Select less"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:417
+msgid "Select more"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:418
+msgid "Show less"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:419
+msgid "Show more"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:437
+msgid "Installing"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:443
+msgid "Please wait, "
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:445
+msgid "Time remaining "
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:446
+msgid "Total time "
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:451
+msgid "Preparing installation"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:472
+#, c-format
+msgid "Installing package %s"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:497
+msgid "Go on anyway?"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:497
+msgid "There was an error ordering packages:"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:521
+msgid "Use existing configuration for X11?"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:594 ../interactive.pm_.c:47
+#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:194 ../my_gtk.pm_.c:348
+#: ../my_gtk.pm_.c:438
+msgid "Ok"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:37
+msgid "An error occurred"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:53
+msgid "Which language do you want?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:60
+msgid "Wanring no wrranty, be carfull it's gonna explose ytou romcpature"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:61
+msgid "Accept"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:61
+msgid "Refuse"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:69
+msgid "What is your keyboard layout?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:79
+msgid "Install/Upgrade"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:80
+msgid "Is this an install or an upgrade?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:81
+msgid "Install"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:81
+msgid "Upgrade"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:89
+msgid "Root Partition"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:90
+msgid "What is the root partition (/) of your system?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:99
+msgid "Install Class"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:100
+msgid "What installation class do you want?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:112
+msgid "What is the type of your mouse?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:116
+msgid "Emulate third button?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:119
+msgid "Mouse Port"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:120
+msgid "Which serial port is your mouse connected to?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:133
+msgid "no available partitions"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:135
+#, c-format
+msgid "(%dMb)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:142
+msgid "Which partition do you want to use as your root partition"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:149
+msgid "Choose the mount points"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:161
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:177
+msgid "Choose the partitions you want to format"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:187
+#, c-format
+msgid "Formatting partition %s"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:195
+msgid "Looking for available packages"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:201
+msgid "Finding packages to upgrade"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:211
+msgid "Keep the current IP configuration"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:212
+msgid "Reconfigure network now"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:213
+msgid "Do not set up networking"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:215
+#: ../install_steps_interactive.pm_.c:221
+msgid "Network Configuration"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:216
+msgid "Local networking has already been configured. Do you want to:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:222
+msgid "Do you want to configure LAN (not dialup) networking for your system?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:229
+msgid "no network card found"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:256
+#, c-format
+msgid "Configuring network device %s"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:257
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:260
+msgid "IP address:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:260
+msgid "Netmask:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:265
+#: ../install_steps_interactive.pm_.c:404
+msgid "IP address should be in format 1.2.3.4"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:283
+msgid "Configuring network"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:284
+msgid ""
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:288
+msgid "DNS server:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:288
+msgid "Gateway device:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:288
+msgid "Gateway:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:288
+msgid "Host name:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:298
+msgid "Is your hardware clock set to GMT?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:300
+msgid "Which is your timezone?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:310
+msgid "Printer"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:311
+msgid "Would you like to configure a printer?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:327
+msgid "Local Printer Options"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:328
+msgid ""
+"Every print queue (which print jobs are directed to) needs a\n"
+"name (often lp) and a spool directory associated with it. What\n"
+"name and directory should be used for this queue?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:331
+msgid "Name of queue:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:331
+msgid "Spool directory:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:342
+msgid "Select Printer Connection"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:343
+msgid "How is the printer connected?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:351
+msgid "Detecting devices..."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:351
+msgid "Test ports"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:364
+#, c-format
+msgid "A printer, model \"%s\", has been detected on "
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:371
+msgid "Local Printer Device"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:372
+msgid ""
+"What device is your printer connected to \n"
+"(note that /dev/lp0 is equivalent to LPT1:)?\n"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:373
+msgid "Printer Device:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:379
+msgid "Remote lpd Printer Options"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:380
+msgid ""
+"To use a remote lpd print queue, you need to supply\n"
+"the hostname of the printer server and the queue name\n"
+"on that server which jobs should be placed in."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:383
+msgid "Remote hostname:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:383
+msgid "Remote queue:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:389
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:390
+msgid ""
+"To print to a SMB printer, you need to provide the\n"
+"SMB host name (Note! It may be different from its\n"
+"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
+"well as the share name for the printer you wish to access and any\n"
+"applicable user name, password, and workgroup information."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:395
+msgid "SMB server IP:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:395
+msgid "SMB server host:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:396
+#: ../install_steps_interactive.pm_.c:418
+#: ../install_steps_interactive.pm_.c:510
+msgid "Password:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:396
+msgid "Share name:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:396
+#: ../install_steps_interactive.pm_.c:418
+msgid "User name:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:397
+msgid "Workgroup:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:412
+msgid "NetWare Printer Options"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:413
+msgid ""
+"To print to a NetWare printer, you need to provide the\n"
+"NetWare print server name (Note! it may be different from its\n"
+"TCP/IP hostname!) as well as the print queue name for the printer you\n"
+"wish to access and any applicable user name and password."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:417
+msgid "Print Queue Name:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:417
+msgid "Printer Server:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:428
+msgid "Configure Printer"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:429
+msgid "What type of printer do you have?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:440
+#: ../install_steps_interactive.pm_.c:441
+msgid "Paper Size"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:460
+msgid "CRLF"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:461
+msgid "Fix stair-stepping text?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:477
+msgid "Configure Uniprint Driver"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:478
+msgid "You may now set the Uniprint driver options for this printer."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:486
+msgid "Configure Color Depth"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:487
+msgid "You may now configure the color options for this printer."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:510
+msgid "Password (again):"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:514
+#: ../install_steps_interactive.pm_.c:546
+msgid "Please try again"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:514
+#: ../install_steps_interactive.pm_.c:546
+msgid "The passwords do not match"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:515
+msgid "This password is too simple"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:533
+msgid "Add user"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:534
+#, c-format
+msgid "(already added %s)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:534
+#, c-format
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:535
+#: ../install_steps_interactive.pm_.c:620
+msgid "Password"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:535
+msgid "Password (again)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:535
+msgid "Real name"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:535
+msgid "Shell"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:535
+msgid "User name"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:548
+msgid "Please give a user name"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:549
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:569
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO on your system, or another operating system removes LILO, or LILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:577
+msgid "Sorry, no floppy drive available"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:580
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:585
+#, c-format
+msgid "Insert a floppy in drive %s"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:586
+msgid "Creating bootdisk"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:593
+msgid "Preparing bootloader"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:603
+msgid "First sector of boot partition"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:603
+msgid "First sector of drive (MBR)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:608
+msgid "LILO Installation"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:609
+msgid "Where do you want to install the bootloader?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:612
+msgid "Do you want to use LILO?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:615
+msgid "Boot device"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:616
+msgid "Linear (needed for some SCSI drives)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:616
+msgid "linear"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:617
+msgid "Compact"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:617
+msgid "compact"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:618
+msgid "Delay before booting default image"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:619
+msgid "Video mode"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:621
+msgid "Restrict command line options"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:621
+msgid "restrict"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:627
+msgid "LILO main options"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:631
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:640
+msgid ""
+"Here are the following entries in LILO.\n"
+"You can add some more or change the existent ones."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:642
+msgid "Add"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:660
+msgid "Image"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:661
+#: ../install_steps_interactive.pm_.c:669
+msgid "Root"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:662
+msgid "Append"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:663
+msgid "Initrd"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:664
+msgid "Read-write"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:670
+msgid "Table"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:671
+msgid "Unsafe"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:676
+msgid "Label"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:678
+msgid "Default"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:697
+msgid "Installation of LILO failed. The following error occured:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:708
+msgid ""
+"Some steps are not completed.\n"
+"Do you really want to quit now?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:712
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"For information on fixes which are available for this release of "
+"Linux-Mandrake,\n"
+"consult the Errata available from http://www.linux-mandrake.com/.\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Linux-Mandrake User's Guide."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:729
+#, c-format
+msgid "Installing driver for %s card %s"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:730
+#, c-format
+msgid "(module %s)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:740
+#, c-format
+msgid "What %s card do you have?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:747
+#, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:752
+msgid "Autoprobe"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:752
+msgid "Specify options"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:756
+#, c-format
+msgid "You may now provide its options to module %s."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:762
+#, c-format
+msgid ""
+"You may now provide its options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:765
+msgid "Module options:"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:775
+#, c-format
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:788
+msgid "Skip PCMCIA probing"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:789
+msgid "Configuring PCMCIA cards..."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:789
+msgid "PCMCIA"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:796
+#, c-format
+msgid "Skip %s PCI probing"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:800
+#, c-format
+msgid "Found %s %s interfaces"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:801
+msgid "Do you have another one?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:802
+#, c-format
+msgid "Do you have an %s interface?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:804 ../interactive.pm_.c:52
+#: ../my_gtk.pm_.c:347
+msgid "No"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:804 ../interactive.pm_.c:52
+#: ../my_gtk.pm_.c:347
+msgid "Yes"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:805
+msgid "See hardware info"
+msgstr ""
+
+#: ../install_steps_stdio.pm_.c:21
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr ""
+
+#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:195 ../my_gtk.pm_.c:348
+msgid "Cancel"
+msgstr ""
+
+#: ../interactive.pm_.c:149
+msgid "Please wait"
+msgstr ""
+
+#: ../interactive_stdio.pm_.c:34
+#, c-format
+msgid "Ambiguity (%s), be more precise\n"
+msgstr ""
+
+#: ../interactive_stdio.pm_.c:35 ../interactive_stdio.pm_.c:50
+#: ../interactive_stdio.pm_.c:69
+msgid "Bad choice, try again\n"
+msgstr ""
+
+#: ../interactive_stdio.pm_.c:38
+#, c-format
+msgid " ? (default %s) "
+msgstr ""
+
+#: ../interactive_stdio.pm_.c:51
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr ""
+
+#: ../interactive_stdio.pm_.c:70
+#, c-format
+msgid "Your choice? (default %s enter `none' for none) "
+msgstr ""
+
+#: ../keyboard.pm_.c:32
+msgid "Belgian"
+msgstr ""
+
+#: ../keyboard.pm_.c:33
+msgid "Bulgarian"
+msgstr ""
+
+#: ../keyboard.pm_.c:35
+msgid "Czech"
+msgstr ""
+
+#: ../keyboard.pm_.c:36
+msgid "German"
+msgstr ""
+
+#: ../keyboard.pm_.c:37
+msgid "Danish"
+msgstr ""
+
+#: ../keyboard.pm_.c:38
+msgid "Dvorak"
+msgstr ""
+
+#: ../keyboard.pm_.c:41
+msgid "Spanish"
+msgstr ""
+
+#: ../keyboard.pm_.c:42
+msgid "Finnish"
+msgstr ""
+
+#: ../keyboard.pm_.c:43
+msgid "French"
+msgstr ""
+
+#: ../keyboard.pm_.c:48
+msgid "Greek"
+msgstr ""
+
+#: ../keyboard.pm_.c:50
+msgid "Hungarian"
+msgstr ""
+
+#: ../keyboard.pm_.c:52
+msgid "Israeli"
+msgstr ""
+
+#: ../keyboard.pm_.c:53
+msgid "Icelandic"
+msgstr ""
+
+#: ../keyboard.pm_.c:55
+msgid "Italian"
+msgstr ""
+
+#: ../keyboard.pm_.c:56
+msgid "Latin American"
+msgstr ""
+
+#: ../keyboard.pm_.c:58
+msgid "Dutch"
+msgstr ""
+
+#: ../keyboard.pm_.c:62
+msgid "Norwegian"
+msgstr ""
+
+#: ../keyboard.pm_.c:64
+msgid "Polish"
+msgstr ""
+
+#: ../keyboard.pm_.c:65
+msgid "Portuguese"
+msgstr ""
+
+#: ../keyboard.pm_.c:68
+msgid "Russian"
+msgstr ""
+
+#: ../keyboard.pm_.c:69
+msgid "Swedish"
+msgstr ""
+
+#: ../keyboard.pm_.c:71
+msgid "Swiss (French layout)"
+msgstr ""
+
+#: ../keyboard.pm_.c:72
+msgid "Swiss (German layout)"
+msgstr ""
+
+#: ../keyboard.pm_.c:77
+msgid "Turkish (traditional \"F\" model)"
+msgstr ""
+
+#: ../keyboard.pm_.c:78
+msgid "Turkish (modern \"Q\" model)"
+msgstr ""
+
+#: ../keyboard.pm_.c:80
+msgid "UK keyboard"
+msgstr ""
+
+#: ../keyboard.pm_.c:82
+msgid "US keyboard"
+msgstr ""
+
+#: ../lilo.pm_.c:111
+msgid ""
+"Welcome to LILO the operating system chooser!\n"
+"To list the possible choices, press <TAB>\n"
+msgstr ""
+
+#: ../mouse.pm_.c:15
+msgid "No Mouse"
+msgstr ""
+
+#: ../mouse.pm_.c:16
+msgid "Microsoft Rev 2.1A or higher (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:17
+msgid "Logitech CC Series (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:18
+msgid "Logitech MouseMan+/FirstMouse+ (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:19
+msgid "ASCII MieMouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:20
+msgid "Genius NetMouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:21
+msgid "Microsoft IntelliMouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:22
+msgid "MM Series (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:23
+msgid "MM HitTablet (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:24
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr ""
+
+#: ../mouse.pm_.c:25
+msgid "Logitech MouseMan/FirstMouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:26
+msgid "Generic Mouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:27
+msgid "Microsoft compatible (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:28
+msgid "Generic 3 Button Mouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:29
+msgid "Mouse Systems (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:30
+msgid "Generic Mouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:31
+msgid "Logitech MouseMan/FirstMouse (ps/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:32
+msgid "Generic 3 Button Mouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:33
+msgid "ALPS GlidePoint (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:34
+msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:35
+msgid "Kensington Thinking Mouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:36
+msgid "ASCII MieMouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:37
+msgid "Genius NetMouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:38
+msgid "Genius NetMouse Pro (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:39
+msgid "Genius NetScroll (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:40
+msgid "Microsoft IntelliMouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:41
+msgid "ATI Bus Mouse"
+msgstr ""
+
+#: ../mouse.pm_.c:42
+msgid "Microsoft Bus Mouse"
+msgstr ""
+
+#: ../mouse.pm_.c:43
+msgid "Logitech Bus Mouse"
+msgstr ""
+
+#: ../partition_table.pm_.c:373
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions"
+msgstr ""
+
+#: ../partition_table.pm_.c:459
+#, c-format
+msgid "Error reading file %s"
+msgstr ""
+
+#: ../partition_table.pm_.c:466
+#, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr ""
+
+#: ../partition_table.pm_.c:468
+msgid "Bad backup file"
+msgstr ""
+
+#: ../partition_table.pm_.c:488
+#, c-format
+msgid "Error writing to file %s"
+msgstr ""
+
+#: ../printer.pm_.c:244
+msgid "Local printer"
+msgstr ""
+
+#: ../printer.pm_.c:245
+msgid "Remote lpd"
+msgstr ""
+
+#: ../printer.pm_.c:246
+msgid "SMB/Windows 95/NT"
+msgstr ""
+
+#: ../printer.pm_.c:247
+msgid "NetWare"
+msgstr ""