summaryrefslogtreecommitdiffstats
path: root/perl-install/printerdrake.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printerdrake.pm')
-rw-r--r--perl-install/printerdrake.pm301
1 files changed, 262 insertions, 39 deletions
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
index 3443ff08b..66037c14c 100644
--- a/perl-install/printerdrake.pm
+++ b/perl-install/printerdrake.pm
@@ -747,7 +747,7 @@ sub choose_model {
}
sub get_printer_info {
- my ($printer) = @_;
+ my ($printer, $in) = @_;
#- Read the printer driver database if necessary
#if ((keys %printer::thedb) == 0) {
# my $w = $in->wait_message('', _("Reading printer database ..."));
@@ -786,7 +786,128 @@ sub get_printer_info {
}
} else {
# The queue was not configured with Foomatic before
+ # Set some special options
+ $printer->{SPECIAL_OPTIONS} = '';
+ # Default page size depending on the country/language
+ # (US/Canada -> Letter, Others -> A4)
+ my $pagesize;
+ if ($printer->{PAPERSIZE}) {
+ $printer->{SPECIAL_OPTIONS} .=
+ " -o PageSize=$printer->{PAPERSIZE}";
+ } elsif (($pagesize = $ENV{'LC_PAPER'}) ||
+ ($pagesize = $ENV{'LANG'}) ||
+ ($pagesize = $ENV{'LC_ALL'})) {
+ if (($pagesize eq 'en') || ($pagesize eq 'en_US')) {
+ $pagesize = "Letter";
+ } else {
+ $pagesize = "A4";
+ }
+ $printer->{SPECIAL_OPTIONS} .=
+ " -o PageSize=$pagesize";
+ }
+ # oki4w driver -> OKI winprinter which needs the
+ # oki4daemon to work
+ if ($printer->{currentqueue}{'driver'} eq 'oki4w') {
+ if ($printer->{currentqueue}{'connect'} ne
+ 'file:/dev/lp0') {
+ $in->ask_warn(_("OKI winprinter configuration"),
+ _("You are configuring an OKI laser winprinter. These printers
+use a very special communication protocol and therefore they
+work only when connected to the first parallel port. When
+your printer is connected to another port or to a print
+server box please connect the printer to the first parallel
+port before you print a test page. Otherwise the printer
+will not work. Your connection type setting will be ignored
+by the driver."));
+ }
+ $printer->{currentqueue}{'connect'} = 'file:/dev/null';
+ # Start the oki4daemon
+ printer::start_service_on_boot('oki4daemon');
+ printer::start_service('oki4daemon');
+ # Set permissions
+ if ($printer->{SPOOLER} eq 'cups') {
+ printer::set_permissions('/dev/oki4drv', '660', 'lp',
+ 'sys');
+ } elsif ($printer->{SPOOLER} eq 'pdq') {
+ printer::set_permissions('/dev/oki4drv', '666');
+ } else {
+ printer::set_permissions('/dev/oki4drv', '660', 'lp',
+ 'lp');
+ }
+ } elsif ($printer->{currentqueue}{'driver'} eq 'lexmarkinkjet') {
+ # Set "Port" option
+ if ($printer->{currentqueue}{'connect'} eq
+ 'file:/dev/lp0') {
+ $printer->{SPECIAL_OPTIONS} .=
+ " -o Port=ParPort1";
+ } elsif ($printer->{currentqueue}{'connect'} eq
+ 'file:/dev/lp1') {
+ $printer->{SPECIAL_OPTIONS} .=
+ " -o Port=ParPort2";
+ } elsif ($printer->{currentqueue}{'connect'} eq
+ 'file:/dev/lp2') {
+ $printer->{SPECIAL_OPTIONS} .=
+ " -o Port=ParPort3";
+ } elsif ($printer->{currentqueue}{'connect'} eq
+ 'file:/dev/usb/lp0') {
+ $printer->{SPECIAL_OPTIONS} .=
+ " -o Port=USB1";
+ } elsif ($printer->{currentqueue}{'connect'} eq
+ 'file:/dev/usb/lp1') {
+ $printer->{SPECIAL_OPTIONS} .=
+ " -o Port=USB2";
+ } elsif ($printer->{currentqueue}{'connect'} eq
+ 'file:/dev/usb/lp2') {
+ $printer->{SPECIAL_OPTIONS} .=
+ " -o Port=USB3";
+ } else {
+ $in->ask_warn(_("Lexmark inkjet configuration"),
+ _("The inkjet printer drivers provided by Lexmark only support
+local printers, no printers on remote machines or print server
+boxes. Please connect your printer to a local port or
+configure it on the machine where it is connected to."));
+ return 0;
+ }
+ # Set device permissions
+ $printer->{currentqueue}{'connect'} =~ /^\s*file:(\S*)\s*$/;
+ if ($printer->{SPOOLER} eq 'cups') {
+ printer::set_permissions($1, '660', 'lp', 'sys');
+ } elsif ($printer->{SPOOLER} eq 'pdq') {
+ printer::set_permissions($1, '666');
+ } else {
+ printer::set_permissions($1, '660', 'lp', 'lp');
+ }
+ # This is needed to have the device not blocked by the
+ # spooler backend.
+ $printer->{currentqueue}{'connect'} = 'file:/dev/null';
+ #install packages
+ my $drivertype = $printer->{currentqueue}{'model'};
+ if ($drivertype eq 'Z22') {$drivertype = 'Z32';}
+ if ($drivertype eq 'Z23') {$drivertype = 'Z33';}
+ $drivertype = lc($drivertype);
+ if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
+ $in->do_pkgs->install("lexmark-drivers-$drivertype");
+ }
+ if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
+ # Driver installation failed, probably we do not have
+ # the commercial CDs
+ $in->ask_warn(_("Lexmark inkjet configuration"),
+ _("To be able to print with your Lexmark inkjet and this
+configuration, you need the inkjet printer drivers
+provided by Lexmark (http://www.lexmark.com/). Go to
+the US site and click on the \"Drivers\" button. Then
+choose your model and afterwards \"Linux\" as
+operating system. The drivers come as RPM packages
+or shell scripts with interactive graphical installation.
+You do not need to do this configuration by the
+graphical frontends. Cancel directly after the license
+agreement. Then print printhead alignment pages with
+\"lexmarkmaintain\" and adjust the head alignment
+settings with this program."));
+ }
+ }
$printer->{ARGS} = printer::read_foomatic_options($printer);
+ delete($printer->{SPECIAL_OPTIONS});
}
} elsif ($printer->{currentqueue}{'ppd'}) { # CUPS+PPD queue?
# If we had a Foomatic queue before, unmark the flag and initialize
@@ -811,6 +932,7 @@ sub get_printer_info {
}
}
}
+ 1;
}
sub setup_options {
@@ -1162,34 +1284,90 @@ new printing system %s?", $oldqueue, $newspoolerstr), 1))) {
}
}
-sub setup_default_spooler {
+sub check_network {
+ # CUPS, LPD, and LPRng need at least basic network functionality to
+ # work. Here we check the state of the network to assure that the
+ # chosen spooler will work.
+
my ($printer, $in) = @_;
- $printer->{SPOOLER} ||= 'cups';
- my $oldspooler = $printer->{SPOOLER};
- my $str_spooler =
- $in->ask_from_list_(_("Select Printer Spooler"),
- _("Which printing system (spooler) do you want to use?"),
- [ printer::spooler() ],
- $printer::spooler_inv{$printer->{SPOOLER}},
- ) or return;
- $printer->{SPOOLER} = $printer::spooler{$str_spooler};
- # Install the spooler if not done yet
- install_spooler($printer, $in);
- if ($printer->{SPOOLER} ne $oldspooler) {
- # Get the queues of this spooler
- {
- my $w = $in->wait_message('', _("Reading printer data ..."));
- printer::read_configured_queues($printer);
+ if ((!$printer->{SPOOLER}) || ($printer->{SPOOLER} eq "pdq")) {
+ return 1;
+ }
+
+ # First Check: Does /etc/sysconfig/network-scripts/draknet_conf exist
+ # (otherwise the network is not configured yet and draknet has to be
+ # started)
+
+ if (!printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
+ my $go_on = 0;
+ while (!$go_on) {
+ my $choice = _("Configure the network now");
+ if ($in->ask_from(_("Network functionality not configured"),
+ _("The printing system which you are going to use (%s) needs basic
+network functionality, but your network functionality is not
+configured yet. If you go on without network configuration, your
+printing system will set up a network only consisting of the
+local machine which does not allow the usage of remote printers
+or the sharing of a local printer with remote clients, but you
+can set up local printers usable from your local machine. How do
+ you want to proceed?",
+ $printer::shortspooler_inv{$printer->{SPOOLER}}),
+ [ { val => \$choice, type => 'list',
+ list => [ _("Configure the network now"),
+ _("Go on without configuring the network") ]} ] )) {
+ if ($choice eq _("Configure the network now")){
+ if ($::isInstall) {
+ require network::netconnect;
+ network::netconnect::main
+ ($in->{prefix}, $in->{netcnx} ||= {},
+ $in->{netc}, $in->{mouse}, $in,
+ $in->{intf}, 0,
+ $in->{lang} eq "fr_FR" &&
+ $in->{keyboard} eq "fr", 0);
+ } else {
+ system("/usr/sbin/draknet");
+ }
+ if (printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
+ $go_on = 1;
+ }
+ } else {
+ return 1;
+ }
+ } else {
+ return 0;
+ }
}
- # Copy queues from former spooler
- copy_queues_from($printer, $in, $oldspooler);
- # Re-read the printer database (CUPS has additional drivers, PDQ
- # has no raw queue)
- %printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database ..."));
- #printer::read_printer_db($printer->{SPOOLER});
}
- return $printer->{SPOOLER};
+ # Second check: The network is configured now, check whether it is up
+ # and running and if not, start it.
+
+ if (!printer::network_status()) {
+ printer::restart_service("network");
+ }
+
+ 1;
+}
+
+sub start_spooler_on_boot {
+ # Checks whether the spooler will be started at boot time and if not,
+ # ask the user whether he wants to start the spooler at boot time.
+ my ($printer, $in, $service) = @_;
+ if (!printer::service_starts_on_boot($service)) {
+ if ($in->ask_yesorno(_("Starting the printing system at boot time"),
+ _("The printing system (%s) will not be started automatically
+when the machine is booted.
+
+It is possible that the automatic starting was turned off
+by changing to a higher security level, because the printing
+system is a potential point for attacks.
+
+Do you want to have the automatic starting of the printing
+system turned on again?",
+ $printer::shortspooler_inv{$printer->{SPOOLER}})), 1) {
+ printer::start_service_on_boot($service);
+ }
+ }
+ 1;
}
sub install_spooler {
@@ -1211,9 +1389,13 @@ sub install_spooler {
if_($in->do_pkgs->is_installed('kdebase'), 'kups'),
($::expert ? 'cups-drivers' : ())));
}
+ # Check whether the network functionality is configured and
+ # running
+ if (!check_network($printer, $in)) {return 0};
# Start daemon
printer::start_service("cups");
- #sleep 1;
+ # Should it be started at boot time?
+ start_spooler_on_boot($printer, $in, "cups");
} elsif ($printer->{SPOOLER} eq "lpd") {
# "lpr" conflicts with "LPRng", remove "LPRng"
if ((!$::testing) &&
@@ -1227,9 +1409,13 @@ sub install_spooler {
/sbin/ifconfig))))) {
$in->do_pkgs->install(('lpr', 'net-tools'));
}
+ # Check whether the network functionality is configured and
+ # running
+ if (!check_network($printer, $in)) {return 0};
# Start daemon
printer::restart_service("lpd");
- #sleep 1;
+ # Should it be started at boot time?
+ start_spooler_on_boot($printer, $in, "lpd");
} elsif ($printer->{SPOOLER} eq "lprng") {
# "LPRng" conflicts with "lpr", remove "lpr"
if ((!$::testing) &&
@@ -1243,9 +1429,13 @@ sub install_spooler {
/sbin/ifconfig))))) {
$in->do_pkgs->install('LPRng', 'net-tools');
}
+ # Check whether the network functionality is configured and
+ # running
+ if (!check_network($printer, $in)) {return 0};
# Start daemon
printer::restart_service("lpd");
- #sleep 1;
+ # Should it be started at boot time?
+ start_spooler_on_boot($printer, $in, "lpd");
} elsif ($printer->{SPOOLER} eq "pdq") {
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/bin/pdq
@@ -1255,6 +1445,40 @@ sub install_spooler {
# PDQ has no daemon, so nothing needs to be started
}
}
+ 1;
+}
+
+sub setup_default_spooler {
+ my ($printer, $in) = @_;
+ $printer->{SPOOLER} ||= 'cups';
+ my $oldspooler = $printer->{SPOOLER};
+ my $str_spooler =
+ $in->ask_from_list_(_("Select Printer Spooler"),
+ _("Which printing system (spooler) do you want to use?"),
+ [ printer::spooler() ],
+ $printer::spooler_inv{$printer->{SPOOLER}},
+ ) or return;
+ $printer->{SPOOLER} = $printer::spooler{$str_spooler};
+ # Install the spooler if not done yet
+ if (!install_spooler($printer, $in)) {
+ $printer->{SPOOLER} = $oldspooler;
+ return;
+ }
+ if ($printer->{SPOOLER} ne $oldspooler) {
+ # Get the queues of this spooler
+ {
+ my $w = $in->wait_message('', _("Reading printer data ..."));
+ printer::read_configured_queues($printer);
+ }
+ # Copy queues from former spooler
+ copy_queues_from($printer, $in, $oldspooler);
+ # Re-read the printer database (CUPS has additional drivers, PDQ
+ # has no raw queue)
+ %printer::thedb = ();
+ #my $w = $in->wait_message('', _("Reading printer database ..."));
+ #printer::read_printer_db($printer->{SPOOLER});
+ }
+ return $printer->{SPOOLER};
}
sub configure_queue {
@@ -1266,7 +1490,7 @@ sub configure_queue {
$printer->{complete} = 0;
}
-#- Program entry point for configuration with of the printing system.
+#- Program entry point for configuration of the printing system.
sub main {
my ($printer, $in, $ask_multiple_printer, $upNetwork) = @_;
@@ -1297,7 +1521,7 @@ sub main {
# If we have chosen a spooler, install it.
if (($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '')) {
- install_spooler($printer, $in);
+ if (!install_spooler($printer, $in)) {return;}
}
}
@@ -1468,7 +1692,7 @@ sub main {
choose_printer_name($printer, $in) or next;
get_db_entry($printer, $in);
choose_model($printer, $in) or next;
- get_printer_info($printer);
+ get_printer_info($printer, $in) or next;
setup_options($printer, $in) or next;
configure_queue($printer, $in);
setasdefault($printer, $in);
@@ -1559,15 +1783,14 @@ What do you want to modify on this printer?",
} elsif (($modify eq _("Printer manufacturer, model, driver")) ||
($modify eq _("Printer manufacturer, model"))) {
get_db_entry($printer, $in);
- choose_model($printer, $in) && do {
- get_printer_info($printer);
+ choose_model($printer, $in) &&
+ get_printer_info($printer, $in) &&
+ setup_options($printer, $in) &&
+ configure_queue($printer, $in);
+ } elsif ($modify eq _("Printer options")) {
+ get_printer_info($printer, $in) &&
setup_options($printer, $in) &&
configure_queue($printer, $in);
- }
- } elsif ($modify eq _("Printer options")) {
- get_printer_info($printer);
- setup_options($printer, $in) &&
- configure_queue($printer, $in);
} elsif ($modify eq _("Set this printer as the default")) {
$printer->{DEFAULT} = $queue;
printer::set_default_printer($printer);