summaryrefslogtreecommitdiffstats
path: root/perl-install/printer
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printer')
-rw-r--r--perl-install/printer/common.pm6
-rw-r--r--perl-install/printer/cups.pm2
-rw-r--r--perl-install/printer/detect.pm6
-rw-r--r--perl-install/printer/gimp.pm18
-rw-r--r--perl-install/printer/main.pm16
-rw-r--r--perl-install/printer/printerdrake.pm74
6 files changed, 61 insertions, 61 deletions
diff --git a/perl-install/printer/common.pm b/perl-install/printer/common.pm
index 7742bcf71..f78d47b90 100644
--- a/perl-install/printer/common.pm
+++ b/perl-install/printer/common.pm
@@ -24,7 +24,7 @@ sub addentry {
}
}
push(@lines, $entry) if $sectionfound && !$entryinserted;
- return join ("\n", @lines);
+ return join "\n", @lines;
}
sub addsection {
@@ -57,7 +57,7 @@ sub removeentry {
}
}
}
- return join ("", @lines);
+ return join "", @lines;
}
sub removesection {
@@ -81,7 +81,7 @@ sub removesection {
}
}
}
- return join ("", @lines);
+ return join "", @lines;
}
1;
diff --git a/perl-install/printer/cups.pm b/perl-install/printer/cups.pm
index c932f1f81..6999c0063 100644
--- a/perl-install/printer/cups.pm
+++ b/perl-install/printer/cups.pm
@@ -19,7 +19,7 @@ sub get_remote_queues {
if ($2 =~ m!^ipp://([^/:]+)[:/]! &&
!$printer->{configured}{$queuename}) {
my $server = $1;
- push (@printerlist, "$queuename|$server");
+ push @printerlist, "$queuename|$server";
}
}
}
diff --git a/perl-install/printer/detect.pm b/perl-install/printer/detect.pm
index 2c5b42e2e..bd73c51b8 100644
--- a/perl-install/printer/detect.pm
+++ b/perl-install/printer/detect.pm
@@ -32,7 +32,7 @@ sub whatNetPrinter {
push @portstoscan, "4010", "4020", "4030", "5503", "9100-9104" if $network;
return () if $#portstoscan < 0;
- my $portlist = join (",", @portstoscan);
+ my $portlist = join ",", @portstoscan;
# Which hosts should be scanned?
# (Applying nmap to a whole network is very time-consuming, because nmap
@@ -41,7 +41,7 @@ sub whatNetPrinter {
# hosts and then scanning only them, which is much faster)
my @hostips = getIPsInLocalNetworks();
return () if $#hostips < 0;
- my $hostlist = join (" ", @hostips);
+ my $hostlist = join " ", @hostips;
# Scan network for printers, the timeout settings are there to avoid
# delays caused by machines blocking their ports with a firewall
@@ -190,7 +190,7 @@ sub getSMBPrinterShares {
my $name = $1;
my $description = $2;
$description =~ s/^(\s*)//;
- push (@shares, { name => $name, description => $description });
+ push @shares, { name => $name, description => $description };
}
}
close F;
diff --git a/perl-install/printer/gimp.pm b/perl-install/printer/gimp.pm
index 2655c4340..c3a8908a7 100644
--- a/perl-install/printer/gimp.pm
+++ b/perl-install/printer/gimp.pm
@@ -43,7 +43,7 @@ sub configure {
}
}
# Add the printer entry
- if (!isprinterconfigured ($queue, $configfilecontent)) {
+ if (!isprinterconfigured($queue, $configfilecontent)) {
# Remove the old printer entry
$configfilecontent =
removeprinter($queue, $configfilecontent);
@@ -60,7 +60,7 @@ sub configure {
s/\n/\nCurrent-Printer: $printer->{DEFAULT}\n/s;
} else {
$configfilecontent =~ /^\s*Current\-Printer\s*:\s*(\S+)\s*$/m;
- if (!isprinterconfigured ($1, $configfilecontent)) {
+ if (!isprinterconfigured($1, $configfilecontent)) {
$configfilecontent =~
s/(Current\-Printer\s*:\s*)\S+/$1$printer->{DEFAULT}/;
}
@@ -114,7 +114,7 @@ sub addcupsremoteto {
# Load GIMP's printer config file
my $configfilecontent = readconfigfile($configfilename);
# Add the printer entry
- if (!isprinterconfigured ($queue, $configfilecontent)) {
+ if (!isprinterconfigured($queue, $configfilecontent)) {
# Remove the old printer entry
$configfilecontent = removeprinter($queue, $configfilecontent);
# Add the new printer entry
@@ -213,8 +213,8 @@ sub makeprinterentry {
sub findconfigfiles {
my @configfilenames;
- push (@configfilenames, ".gimp-1.2/printrc") if -d "$::prefix/usr/lib/gimp/1.2";
- push (@configfilenames, ".gimp-1.3/printrc") if -d "$::prefix/usr/lib/gimp/1.3";
+ push @configfilenames, ".gimp-1.2/printrc" if -d "$::prefix/usr/lib/gimp/1.2";
+ push @configfilenames, ".gimp-1.3/printrc" if -d "$::prefix/usr/lib/gimp/1.3";
my @filestotreat;
local *PASSWD;
open PASSWD, "< $::prefix/etc/passwd" or die "Cannot read /etc/passwd!\n";
@@ -239,7 +239,7 @@ sub findconfigfiles {
close F;
set_permissions("$::prefix$homedir/$file", "$uid.$gid") or next;
}
- push (@filestotreat, "$homedir/$file");
+ push @filestotreat, "$homedir/$file";
}
}
}
@@ -282,7 +282,7 @@ sub addentry {
}
}
push(@lines, $entry) if $sectionfound && !$entryinserted;
- return join ("\n", @lines);
+ return join("\n", @lines);
}
sub addprinter {
@@ -317,7 +317,7 @@ sub removeentry {
}
}
}
- return join ("", @lines);
+ return join "", @lines;
}
sub removeprinter {
@@ -341,7 +341,7 @@ sub removeprinter {
}
}
}
- return join ("", @lines);
+ return join "", @lines;
}
sub isprinterconfigured {
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
index 6eaa34561..d66b41385 100644
--- a/perl-install/printer/main.pm
+++ b/perl-install/printer/main.pm
@@ -403,7 +403,7 @@ sub read_printer_db(;$) {
# End of drivers block
$indrivers = 0;
} elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
- push (@{$entry->{drivers}}, $1);
+ push @{$entry->{drivers}}, $1;
}
} elsif ($inautodetect) {
# We are inside the autodetect block of a printers entry
@@ -654,7 +654,7 @@ sub read_cups_printer_list {
} else {
$comment = N("(on this machine)");
}
- push (@printerlist, "$queuename $comment");
+ push @printerlist, "$queuename $comment";
}
}
close F;
@@ -679,11 +679,11 @@ sub get_cups_remote_queues {
!$printer->{configured}{$queuename}) {
$comment = N("On CUPS server \"%s\"", $1);
my $sep = "!";
- push (@printerlist,
+ push @printerlist,
($::expert ? N("CUPS") . $sep : "") .
N("Remote Printers") . "$sep$queuename: $comment"
. ($queuename eq $printer->{DEFAULT} ?
- N(" (Default)") : ""));
+ N(" (Default)") : "");
}
}
}
@@ -1237,7 +1237,7 @@ sub configure_hpoj {
s!varLock=\"/var/lock\"!varLock=\"$::prefix/var/lock\"!g;
s!varRunPrefix=\"/var/run\"!varRunPrefix=\"$::prefix/var/run\"!g;
}
- push (@ptalinitfunctions, $_);
+ push @ptalinitfunctions, $_;
}
}
close PTALINIT;
@@ -1357,7 +1357,7 @@ sub configure_hpoj {
my $line = <F>;
if ($line =~ /^\s*\S+\s+(\d+)\s+/) {
my $pid = $1;
- kill (15, $pid);
+ kill 15, $pid;
}
close F;
}
@@ -1371,7 +1371,7 @@ sub configure_hpoj {
# Determine the ptal device name from already existing config files
my $ptalprefix =
($bus eq "hpjd" ? "hpjd:" : "mlc:$bus:");
- my $ptaldevice = printer::hpoj::lookupDevname ($ptalprefix, $model_long,
+ my $ptaldevice = printer::hpoj::lookupDevname($ptalprefix, $model_long,
$serialnumber_long, $base_address);
# It's all done for us, the device is already configured
@@ -1390,7 +1390,7 @@ sub configure_hpoj {
printer::hpoj::deleteDevice($ptaldevice);
if ($bus eq "par") {
while (1) {
- my $oldDevname = printer::hpoj::lookupDevname ("mlc:par:",undef,undef,$base_address);
+ my $oldDevname = printer::hpoj::lookupDevname("mlc:par:",undef,undef,$base_address);
last unless defined($oldDevname);
printer::hpoj::deleteDevice($oldDevname);
}
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 4673992f9..e52e6fd34 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -141,13 +141,13 @@ sub setup_printer_connection {
# Choose the appropriate connection config dialog
my $done = 1;
for ($printer->{TYPE}) {
- /LOCAL/ and setup_local_autoscan ($printer, $in, $upNetwork) and last;
- /LPD/ and setup_lpd ($printer, $in, $upNetwork) and last;
- /SOCKET/ and setup_socket ($printer, $in, $upNetwork) and last;
- /SMB/ and setup_smb ($printer, $in, $upNetwork) and last;
- /NCP/ and setup_ncp ($printer, $in, $upNetwork) and last;
- /URI/ and setup_uri ($printer, $in, $upNetwork) and last;
- /POSTPIPE/ and setup_postpipe ($printer, $in) and last;
+ /LOCAL/ and setup_local_autoscan($printer, $in, $upNetwork) and last;
+ /LPD/ and setup_lpd( $printer, $in, $upNetwork) and last;
+ /SOCKET/ and setup_socket( $printer, $in, $upNetwork) and last;
+ /SMB/ and setup_smb( $printer, $in, $upNetwork) and last;
+ /NCP/ and setup_ncp( $printer, $in, $upNetwork) and last;
+ /URI/ and setup_uri( $printer, $in, $upNetwork) and last;
+ /POSTPIPE/ and setup_postpipe( $printer, $in) and last;
$done = 0; last;
}
return $done;
@@ -166,40 +166,40 @@ sub first_time_dialog {
my $localprinterspresent;
if (@autodetected == ()) {
$localprinterspresent = 0;
- push (@printerlist, N("There are no printers found which are directly connected to your machine"));
+ push @printerlist, N("There are no printers found which are directly connected to your machine");
} else {
$localprinterspresent = 1;
foreach my $printer (@autodetected) {
my $entry = $printer->{val}{DESCRIPTION};
- if ($entry) { push (@printerlist, " - $entry\n") }
+ if ($entry) { push @printerlist, " - $entry\n" }
}
my $morethanoneprinters = $#printerlist > 0;
my $unknown_printers = $#autodetected - $#printerlist;
if (@printerlist != ()) {
- unshift (@printerlist,
+ unshift @printerlist,
($morethanoneprinters ?
N("The following printers\n\n") :
- N("The following printer\n\n")));
+ N("The following printer\n\n"));
if ($unknown_printers == 1) {
- push (@printerlist, N("\nand one unknown printer are "));
+ push @printerlist, N("\nand one unknown printer are ");
} elsif ($unknown_printers > 1) {
- push (@printerlist, N("\nand %d unknown printers are ",
- $unknown_printers));
+ push @printerlist, N("\nand %d unknown printers are ",
+ $unknown_printers);
} else {
- push (@printerlist, ($morethanoneprinters ? N("\nare ") : N("\nis ")));
+ push @printerlist, ($morethanoneprinters ? N("\nare ") : N("\nis "));
}
- push (@printerlist, N("directly connected to your system"));
+ push @printerlist, N("directly connected to your system");
} else {
if ($unknown_printers == 1) {
- push (@printerlist, N("\nThere is one unknown printer directly connected to your system"));
+ push @printerlist, N("\nThere is one unknown printer directly connected to your system");
} elsif ($unknown_printers > 1) {
- push (@printerlist, N("\nThere are %d unknown printers directly connected to your system",
- $unknown_printers));
+ push @printerlist, N("\nThere are %d unknown printers directly connected to your system",
+ $unknown_printers);
}
}
}
- push (@printerlist,
- N(" (Make sure that all your printers are connected and turned on).\n"));
+ push @printerlist,
+ N(" (Make sure that all your printers are connected and turned on).\n");
my $localprinters = join('', @printerlist);
# Do we have a local network?
@@ -607,7 +607,7 @@ sub setup_local_autoscan {
# Do configuration of multi-function devices and look up model name
# in the printer database
- setup_common ($printer, $in, $menuchoice, $device, $do_auto_detect,
+ setup_common($printer, $in, $menuchoice, $device, $do_auto_detect,
@autodetected);
1;
@@ -675,7 +675,7 @@ complete => sub {
# Do configuration of multi-function devices and look up model name
# in the printer database
- setup_common ($printer, $in,
+ setup_common($printer, $in,
"$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}",
$printer->{currentqueue}{connect}, $auto_hpoj,
({port => $printer->{currentqueue}{connect},
@@ -1098,7 +1098,7 @@ sub setup_socket {
# Do configuration of multi-function devices and look up model name
# in the printer database
- setup_common ($printer, $in,
+ setup_common($printer, $in,
"$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}",
$printer->{currentqueue}{connect}, $auto_hpoj,
({port => $printer->{currentqueue}{connect},
@@ -1183,7 +1183,7 @@ complete => sub {
# Do configuration of multi-function devices and look up model name
# in the printer database
- setup_common ($printer, $in,
+ setup_common($printer, $in,
"$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}",
$printer->{currentqueue}{connect}, $auto_hpoj,
({port => $printer->{currentqueue}{connect},
@@ -1417,7 +1417,7 @@ sub setup_common {
$printer->{DBENTRY} = $entry;
}
}
- $printer->{DBENTRY} ||= bestMatchSentence ($descr, keys %printer::main::thedb);
+ $printer->{DBENTRY} ||= bestMatchSentence($descr, keys %printer::main::thedb);
# If the manufacturer was not guessed correctly, discard the
# guess.
$printer->{DBENTRY} =~ /^([^\|]+)\|/;
@@ -2153,11 +2153,11 @@ Note: the photo test page can take a rather long time to get printed and on lase
$in->do_pkgs->install('ImageMagick');
}
# set up list of pages to print
- $standard && push (@testpages, $stdtestpage);
- $altletter && push (@testpages, $altlttestpage);
- $alta4 && push (@testpages, $alta4testpage);
- $photo && push (@testpages, $phototestpage);
- $ascii && push (@testpages, $asciitestpage);
+ $standard && push @testpages, $stdtestpage;
+ $altletter && push @testpages, $altlttestpage;
+ $alta4 && push @testpages, $alta4testpage;
+ $photo && push @testpages, $phototestpage;
+ $ascii && push @testpages, $asciitestpage;
# print the stuff
@lpq_output = printer::main::print_pages($printer, @testpages);
}
@@ -2354,9 +2354,9 @@ sub copy_queues_from {
$newspoolerstr = $printer::shortspooler_inv{$newspooler};
$oldspoolerstr = $printer::shortspooler_inv{$oldspooler};
foreach (@oldqueues) {
- push (@queuesselected, 1);
- push (@queueentries, { text => $_, type => 'bool',
- val => \$queuesselected[$#queuesselected] });
+ push @queuesselected, 1;
+ push @queueentries, { text => $_, type => 'bool',
+ val => \$queuesselected[$#queuesselected] };
}
# LPRng and LPD use the same config files, therefore one sees the
# queues of LPD when one uses LPRng and vice versa, but these queues
@@ -2854,12 +2854,12 @@ sub main {
0) ? "\@addprinter" : "\@quit";
if ($menuchoice ne "\@quit") {
$printer->{SPOOLER} ||=
- setup_default_spooler ($printer, $in, $upNetwork) ||
+ setup_default_spooler($printer, $in, $upNetwork) ||
return;
}
} else {
# Ask for a spooler when none is defined
- $printer->{SPOOLER} ||= setup_default_spooler ($printer, $in, $upNetwork) || return;
+ $printer->{SPOOLER} ||= setup_default_spooler($printer, $in, $upNetwork) || return;
# This entry and the check for this entry have to use
# the same translation to work properly
my $spoolerentry = N("Printing system: ");
@@ -3022,7 +3022,7 @@ sub main {
}
# Function to switch to another spooler
if ($menuchoice eq "\@spooler") {
- $printer->{SPOOLER} = setup_default_spooler ($printer, $in, $upNetwork) || $printer->{SPOOLER};
+ $printer->{SPOOLER} = setup_default_spooler($printer, $in, $upNetwork) || $printer->{SPOOLER};
next;
}
# Rip the queue name out of the chosen menu entry