summaryrefslogtreecommitdiffstats
path: root/perl-install/partition_table
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/partition_table')
-rw-r--r--perl-install/partition_table/bsd.pm147
-rw-r--r--perl-install/partition_table/dos.pm99
-rw-r--r--perl-install/partition_table/empty.pm36
-rw-r--r--perl-install/partition_table/gpt.pm266
-rw-r--r--perl-install/partition_table/lvm_PV.pm43
-rw-r--r--perl-install/partition_table/mac.pm398
-rw-r--r--perl-install/partition_table/raw.pm192
-rw-r--r--perl-install/partition_table/sun.pm201
8 files changed, 1382 insertions, 0 deletions
diff --git a/perl-install/partition_table/bsd.pm b/perl-install/partition_table/bsd.pm
new file mode 100644
index 000000000..431d17f1f
--- /dev/null
+++ b/perl-install/partition_table/bsd.pm
@@ -0,0 +1,147 @@
+package partition_table::bsd; # $Id$
+
+use diagnostics;
+use strict;
+use vars qw(@ISA);
+
+@ISA = qw(partition_table::raw);
+
+use common;
+use partition_table::raw;
+use partition_table;
+use c;
+
+#- very bad and rough handling :(
+my %typeToDos = (
+ 8 => 0x83,
+ 1 => 0x82,
+);
+my %typeFromDos = reverse %typeToDos;
+
+my ($main_format, $main_fields) = list2kv(
+ I => 'magic',
+ S => 'type',
+ S => 'subtype',
+ a16 => 'typename',
+ a16 => 'packname',
+ I => 'secsize',
+ I => 'nsectors',
+ I => 'ntracks',
+ I => 'ncylinders',
+ I => 'secpercyl',
+ I => 'secprtunit',
+ S => 'sparespertrack',
+ S => 'sparespercyl',
+ I => 'acylinders',
+ S => 'rpm',
+ S => 'interleave',
+ S => 'trackskew',
+ S => 'cylskew',
+ I => 'headswitch',
+ I => 'trkseek',
+ I => 'flags',
+ a20 => 'drivedata',
+ a20 => 'spare',
+ I => 'magic2',
+ S => 'checksum',
+ S => 'npartitions',
+ I => 'bbsize',
+ I => 'sbsize',
+ a128=> 'partitions',
+ a236=> 'blank',
+);
+$main_format = join '', @$main_format;
+
+my @fields = qw(size start fsize type frag cpg);
+my $format = "I I I C C S";
+my $magic = 0x82564557;
+my $nb_primary = 8;
+my $offset = 0x40;
+
+sub read($$) {
+ my ($hd, $sector) = @_;
+ my $tmp;
+
+ local *F; partition_table::raw::openit($hd, *F) or die "failed to open device";
+ c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed";
+
+ sysread F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
+ my %info; @info{@$main_fields} = unpack $main_format, $tmp;
+
+ #- TODO verify checksum
+
+ my $size = psizeof($format);
+ my @pt = map {
+ my %h; @h{@fields} = unpack $format, $_;
+ $h{type} = $typeToDos{$h{type}} || $h{type};
+ \%h;
+ } $info{partitions} =~ /(.{$size})/g;
+
+ #- check magic number
+ $info{magic} == $magic or die "bad magic number on disk $hd->{device}";
+ $info{magic2} == $magic or die "bad magic number on disk $hd->{device}";
+
+ [ @pt ], \%info;
+}
+
+# write the partition table (and extended ones)
+# for each entry, it uses fields: start, size, type, active
+sub write($$$;$) {
+ my ($hd, $sector, $pt, $info) = @_;
+
+ #- handle testing for writing partition table on file only!
+ local *F;
+ if ($::testing) {
+ my $file = "/tmp/partition_table_$hd->{device}";
+ open F, ">$file" or die "error opening test file $file";
+ } else {
+ partition_table::raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+ c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+ }
+
+ #- TODO compute checksum
+
+ $info->{npartitions} = $nb_primary; #- is it ok?
+
+ @$pt == $nb_primary or die "partition table does not have $nb_primary entries";
+ $info->{partitions} = join '', map {
+ local $_->{type} = $typeFromDos{$_->{type}} || $_->{type};
+ pack $format, @$_{@fields};
+ } @$pt;
+
+ syswrite F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
+ 1;
+}
+
+sub info {
+ my ($hd) = @_;
+ my $dtype_scsi = 4; #- taken from fdisk, removed unused one,
+ my $dtype_ST506 = 6; #- see fdisk for more
+
+ {
+ magic => $magic,
+ magic2 => $magic,
+ dtype => $hd->{device} =~ /^sd/ ? $dtype_scsi : $dtype_ST506,
+ secsize => $common::SECTORSIZE,
+ ncylinders => $hd->{geom}{cylinders},
+ secpercyl => $hd->cylinder_size(),
+ secprtunit => $hd->{geom}{totalsectors},
+ rpm => 3600,
+ interleave => 1,
+ trackskew => 0,
+ cylskew => 0,
+ headswitch => 0,
+ trkseek => 0,
+ bbsize => 8192, #- size of boot area, with label
+ sbsize => 8192, #- max size of fs superblock
+ };
+}
+
+sub clear_raw {
+ my ($hd) = @_;
+ { raw => [ ({}) x $nb_primary ], info => info($hd) };
+}
+
+sub first_usable_sector { 2048 }
+
+1;
diff --git a/perl-install/partition_table/dos.pm b/perl-install/partition_table/dos.pm
new file mode 100644
index 000000000..a6ad4be76
--- /dev/null
+++ b/perl-install/partition_table/dos.pm
@@ -0,0 +1,99 @@
+package partition_table::dos; # $Id$
+
+use diagnostics;
+use strict;
+use vars qw(@ISA);
+
+@ISA = qw(partition_table::raw);
+
+use common;
+use partition_table::raw;
+use partition_table;
+use c;
+
+my @fields = qw(active start_head start_sec start_cyl type end_head end_sec end_cyl start size);
+my $format = "C8 V2";
+my $magic = "\x55\xAA";
+my $nb_primary = 4;
+
+my $offset = $common::SECTORSIZE - length($magic) - $nb_primary * common::psizeof($format);
+
+sub hasExtended { 1 }
+
+sub compute_CHS($$) {
+ my ($hd, $e) = @_;
+ my @l = qw(cyl head sec);
+ @$e{map { "start_$_" } @l} = $e->{start} || $e->{type} ? CHS2rawCHS($hd, sector2CHS($hd, $e->{start})) : (0,0,0);
+ @$e{map { "end_$_" } @l} = $e->{start} || $e->{type} ? CHS2rawCHS($hd, sector2CHS($hd, $e->{start} + $e->{size} - 1)) : (0,0,0);
+ 1;
+}
+
+sub CHS2rawCHS {
+ my ($hd, $c, $h, $s) = @_;
+ if ($c > 1023) {
+ #- no way to have a #cylinder >= 1024
+ $c = 1023;
+ $h = $hd->{geom}{heads} - 1;
+ $s = $hd->{geom}{sectors};
+ }
+ ($c & 0xff, $h, $s | ($c >> 2 & 0xc0));
+}
+
+# returns (cylinder, head, sector)
+sub sector2CHS {
+ my ($hd, $start) = @_;
+ my ($s, $h);
+ ($start, $s) = divide($start, $hd->{geom}{sectors});
+ ($start, $h) = divide($start, $hd->{geom}{heads});
+ ($start, $h, $s + 1);
+}
+
+sub read {
+ my ($hd, $sector) = @_;
+ my $tmp;
+
+ local *F; partition_table::raw::openit($hd, *F) or die "failed to open device";
+ c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed";
+
+ my @pt = map {
+ sysread F, $tmp, psizeof($format) or die "error while reading partition table in sector $sector";
+ my %h; @h{@fields} = unpack $format, $tmp;
+ \%h;
+ } (1..$nb_primary);
+
+ #- check magic number
+ sysread F, $tmp, length $magic or die "error reading magic number on disk $hd->{device}";
+ $tmp eq $magic or die "bad magic number on disk $hd->{device}";
+
+ [ @pt ];
+}
+
+# write the partition table (and extended ones)
+# for each entry, it uses fields: start, size, type, active
+sub write($$$;$) {
+ my ($hd, $sector, $pt) = @_;
+
+ #- handle testing for writing partition table on file only!
+ local *F;
+ if ($::testing) {
+ my $file = "/tmp/partition_table_$hd->{device}";
+ open F, ">$file" or die "error opening test file $file";
+ } else {
+ partition_table::raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+ c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+ }
+
+ @$pt == $nb_primary or die "partition table does not have $nb_primary entries";
+ foreach (@$pt) {
+ compute_CHS($hd, $_);
+ local $_->{start} = $_->{local_start} || 0;
+ $_->{active} ||= 0; $_->{type} ||= 0; $_->{size} ||= 0; #- for no warning
+ syswrite F, pack($format, @$_{@fields}), psizeof($format) or return 0;
+ }
+ syswrite F, $magic, length $magic or return 0;
+ 1;
+}
+
+sub clear_raw { { raw => [ ({}) x $nb_primary ] } }
+
+1;
diff --git a/perl-install/partition_table/empty.pm b/perl-install/partition_table/empty.pm
new file mode 100644
index 000000000..e90991684
--- /dev/null
+++ b/perl-install/partition_table/empty.pm
@@ -0,0 +1,36 @@
+package partition_table::empty; # $Id$
+
+#- this is a mainly dummy partition table. If we find it's empty, we just call -
+#- zero_MBR which will take care of bless'ing us to the partition table type best
+#- suited
+
+
+use diagnostics;
+use strict;
+use vars qw(@ISA);
+
+@ISA = qw(partition_table::raw);
+
+use common;
+use partition_table::raw;
+use partition_table;
+use c;
+
+
+sub read($$) {
+ my ($hd, $sector) = @_;
+ my $tmp;
+
+ local *F; partition_table::raw::openit($hd, *F) or die "failed to open device";
+ c::lseek_sector(fileno(F), $sector, 0) or die "reading of partition in sector $sector failed";
+
+ #- check magic number
+ sysread F, $tmp, 512 or die "error reading magic number on disk $hd->{device}";
+ $tmp eq substr($tmp, 0, 1) x 512 or die "bad magic number on disk $hd->{device}";
+
+ partition_table::raw::zero_MBR($hd);
+
+ $hd->{primary}{raw};
+}
+
+1;
diff --git a/perl-install/partition_table/gpt.pm b/perl-install/partition_table/gpt.pm
new file mode 100644
index 000000000..01de8f8a7
--- /dev/null
+++ b/perl-install/partition_table/gpt.pm
@@ -0,0 +1,266 @@
+package partition_table::gpt; # $Id$
+
+use diagnostics;
+use strict;
+use vars qw(@ISA);
+
+@ISA = qw(partition_table::raw);
+
+use common;
+use partition_table::raw;
+use partition_table::dos;
+use partition_table;
+use c;
+
+my %gpt_types = (
+ 0x00 => "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+ 0x82 => "\x6d\xfd\x57\x06\xab\xa4\xc4\x43\x84\xe5\x09\x33\xc8\x4b\x4f\x4f",
+ 0x83 => "\xA2\xA0\xD0\xEB\xE5\xB9\x33\x44\x87\xC0\x68\xB6\xB7\x26\x99\xC7",
+ 0x8e => "\x79\xd3\xd6\xe6\x07\xf5\xc2\x44\xa2\x3c\x23\x8f\x2a\x3d\xf9\x28",
+ 0xfd => "\x0f\x88\x9d\xa1\xfc\x05\x3b\x4d\xa0\x06\x74\x3f\x0f\x84\x91\x1e",
+ 0xef => "\x28\x73\x2A\xC1\x1F\xF8\xd2\x11\xBA\x4B\x00\xA0\xC9\x3E\xC9\x3B",
+ # legacy_partition_table => "\x41\xEE\x4D\x02\xE7\x33\xd3\x11\x9D\x69\x00\x08\xC7\x81\xF3\x9F"
+ # PARTITION_MSFT_RESERVED_GUID "\x16\xE3\xC9\xE3\x5C\x0B\xB8\x4D\x81\x7D\xF9\x2D\xF0\x02\x15\xAE"
+ #PARTITION_RESERVED_GUID "\x39\x33\xa6\x8d\x07\x00\xc0\x60\xc4\x36\x08\x3a\xc8\x23\x09\x08"
+);
+
+my $current_revision = 0x00010200;
+my ($main_format, $main_fields) = list2kv(
+ a8 => 'magic',
+ V => 'revision',
+ V => 'headerSize',
+ V => 'headerCRC32',
+ a4 => 'blank1',
+ Q => 'myLBA',
+ Q => 'alternateLBA',
+ Q => 'firstUsableLBA',
+ Q => 'lastUsableLBA',
+ a16 => 'guid',
+ Q => 'partitionEntriesLBA',
+ V => 'nbPartitions',
+ V => 'partitionEntrySize',
+ V => 'partitionEntriesCRC32',
+);
+
+my ($partitionEntry_format, $partitionEntry_fields) = list2kv(
+ a16 => 'gpt_type',
+ a16 => 'guid',
+ Q => 'start',
+ Q => 'ending',
+ a8 => 'efi_attributes',
+ a72 => 'name',
+);
+
+my ($guid_format, $guid_fields) = list2kv(
+ N => 'time_low',
+ n => 'time_mid',
+ n => 'time_hi_and_version',
+ n => 'clock_seq',
+ a6 => 'node',
+);
+
+$_ = join('', @$_) foreach $main_format, $partitionEntry_format, $guid_format;
+
+my $magic = "EFI PART";
+
+sub generate_guid {
+ my $tmp;
+ local *F;
+ open F, devices::make("random") or die "Could not open /dev/random for GUID generation";
+ read F, $tmp, psizeof($guid_format);
+
+ my %guid; @guid{@$guid_fields} = unpack $guid_format, $tmp;
+ $guid{clock_seq} = ($guid{clock_seq} & 0x3fff) | 0x8000;
+ $guid{time_hi_and_version} = ($guid{time_hi_and_version} & 0x0fff) | 0x4000;
+ pack($guid_format, @guid{@$guid_fields});
+}
+
+sub crc32 {
+ my ($buffer) = @_;
+
+ my $crc = 0xFFFFFFFF;
+ foreach (unpack "C*", $buffer) {
+ my $subcrc = ($crc ^ $_) & 0xFF;
+ for (my $j = 8; $j > 0; $j--){
+ my $b = $subcrc & 1;
+ $subcrc = ($subcrc >> 1) & 0x7FFFFFFF;
+ $subcrc = $subcrc ^ 0xEDB88320 if $b;
+ }
+ $crc = ($crc >> 8) ^ $subcrc;
+ }
+ $crc ^ 0xFFFFFFFF;
+}
+
+sub compute_headerCRC32 {
+ my ($info) = @_;
+ local $info->{headerCRC32} = 0;
+ crc32(pack($main_format, @$info{@$main_fields}));
+}
+
+sub read_header {
+ my ($sector, $F) = @_;
+ my $tmp;
+
+ c::lseek_sector(fileno($F), $sector, 0) or die "reading of partition in sector $sector failed";
+
+ sysread $F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
+ my %info; @info{@$main_fields} = unpack $main_format, $tmp;
+
+ $info{magic} eq $magic or die "bad magic number on disk $hd->{device}";
+ $info{myLBA} == $sector or die "myLBA is not the same";
+ $info{headerSize} == psizeof($main_format) or die "bad partition table header size";
+ $info{partitionEntrySize} == psizeof($partitionEntry_format) or die "bad partitionEntrySize";
+ $info{revision} <= $current_revision or log::l("oops, this is a new GPT revision ($info{revision} > $current_revision)");
+
+ $info{headerCRC32} == compute_headerCRC32(\%info) or die "bad partition table checksum";
+ \%info
+}
+
+sub read_partitionEntries {
+ my ($info, $F) = @_;
+ my $tmp;
+
+ c::lseek_sector(fileno($F), $info->{partitionEntriesLBA}, 0) or die "can't seek to sector partitionEntriesLBA";
+ sysread $F, $tmp, psizeof($partitionEntry_format) * $info->{nbPartitions} or die "error while reading partition table in sector $info->{partitionEntriesLBA}";
+ $info->{partitionEntriesCRC32} == crc32($tmp) or die "bad partition entries checksum";
+
+ c::lseek_sector(fileno($F), $info->{partitionEntriesLBA}, 0) or die "can't seek to sector partitionEntriesLBA";
+ my %gpt_types_rev = reverse %gpt_types;
+ my @pt =
+ map {
+ sysread $F, $tmp, psizeof($partitionEntry_format) or die "error while reading partition table in sector $info->{partitionEntriesLBA}";
+ my %h; @h{@$partitionEntry_fields} = unpack $partitionEntry_format, $tmp;
+ $h{size} = $h{ending} - $h{start} + 1;
+ $h{type} = $gpt_types_rev{$h{gpt_type}};
+ $h{type} = 0x100 if !defined $h{type};
+ \%h;
+ } (1 .. $info->{nbPartitions});
+ \@pt;
+}
+
+sub read {
+ my ($hd, $sector) = @_;
+ my $tmp;
+
+ my $l = partition_table::dos::read($hd, $sector);
+ my @l = grep { $_->{size} && $_->{type} && !partition_table::isExtended($_) } @$l;
+ @l == 1 or die "bad PMBR";
+ $l[0]{type} == 0xee or die "bad PMBR";
+ my $myLBA = $l[0]{start};
+
+ local *F; partition_table::raw::openit($hd, *F) or die "failed to open device";
+ my $info1 = eval { read_header($myLBA, *F) };
+ my $info2 = eval { read_header($info1->{alternateLBA} || $l[0]{start} + $l[0]{size} - 1, *F) }; #- what about using $hd->{totalsectors} ???
+ my $info = $info1 || { %$info2, myLBA => $info2->{alternateLBA}, alternateLBA => $info2->{myLBA}, partitionEntriesLBA => $info2->{alternateLBA} + 1 } or die;
+ my $pt = $info1 && $info2 ?
+ eval { $info1 && read_partitionEntries($info1, *F) } || read_partitionEntries($info2, *F) :
+ read_partitionEntries($info, *F);
+ $hd->raw_removed($pt);
+
+ $pt, $info;
+}
+
+# write the partition table (and extended ones)
+# for each entry, it uses fields: start, size, type, active
+sub write {
+ my ($hd, $sector, $pt, $info) = @_;
+
+ foreach (@$pt) {
+ $_->{ending} = $_->{start} + $_->{size} - 1;
+ $_->{guid} ||= generate_guid;
+ $_->{gpt_type} = $gpt_types{$_->{type}} || $_->{gpt_type} || $gpt_types{0x83};
+ }
+ my $partitionEntries = join('', map {
+ pack($partitionEntry_format, @$_{@$partitionEntry_fields})
+ } (@$pt, ({}) x ($info->{nbPartitions} - @$pt)));
+
+ $info->{partitionEntriesCRC32} = crc32($partitionEntries);
+ $info->{headerCRC32} = compute_headerCRC32($info);
+
+ my $info2 = { %$info,
+ myLBA => $info->{alternateLBA}, alternateLBA => $info->{myLBA},
+ partitionEntriesLBA => $info->{alternateLBA} - psizeof($partitionEntry_format) * $info->{nbPartitions} / 512,
+ };
+ $info2->{headerCRC32} = compute_headerCRC32($info2);
+
+ {
+ # write the PMBR
+ my $pmbr = partition_table::dos::clear_raw();
+ $pmbr->{raw}[0] = { type => 0xee, local_start => $info->{myLBA}, size => $info->{alternateLBA} - $info->{myLBA} + 1 };
+ partition_table::dos::write($hd, $sector, $pmbr->{raw});
+ }
+
+ local *F;
+ partition_table::raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+
+ c::lseek_sector(fileno(F), $info->{myLBA}, 0) or return 0;
+ #- pad with 0's
+ syswrite F, pack($main_format, @$info{@$main_fields}) . "\0" x 512, 512 or return 0;
+
+ c::lseek_sector(fileno(F), $info->{alternateLBA}, 0) or return 0;
+ #- pad with 0's
+ syswrite F, pack($main_format, @$info2{@$main_fields}) . "\0" x 512, 512 or return 0;
+
+ c::lseek_sector(fileno(F), $info->{partitionEntriesLBA}, 0) or return 0;
+ syswrite F, $partitionEntries or return 0;
+
+ c::lseek_sector(fileno(F), $info2->{partitionEntriesLBA}, 0) or return 0;
+ syswrite F, $partitionEntries or return 0;
+
+ common::sync();
+ 1;
+}
+
+sub raw_removed {
+ my ($hd, $raw) = @_;
+ @$raw = grep { $_->{size} && $_->{type} } @$raw;
+}
+sub can_raw_add {
+ my ($hd) = @_;
+ @{$hd->{primary}{raw}} < $hd->{primary}{info}{nbPartitions};
+}
+sub raw_add {
+ my ($hd, $raw, $part) = @_;
+ $hd->can_raw_add or die "raw_add: partition table already full";
+ push @$raw, $part;
+}
+
+sub adjustStart {}
+sub adjustEnd {}
+
+sub first_usable_sector {
+ my ($hd) = @_;
+ $hd->{primary}{info}{firstUsableLBA};
+}
+sub last_usable_sector {
+ my ($hd) = @_;
+ $hd->{primary}{info}{lastUsableLBA} + 1;
+}
+
+sub info {
+ my ($hd) = @_;
+ my $nb_sect = 32;
+
+ #- build a default suitable partition table,
+ #- checksum will be built when writing on disk.
+ {
+ magic => $magic,
+ revision => $current_revision,
+ headerSize => psizeof($main_format),
+ myLBA => 1,
+ alternateLBA => $hd->{totalsectors} - 1,
+ firstUsableLBA => $nb_sect + 2,
+ lastUsableLBA => $hd->{totalsectors} - $nb_sect - 2,
+ guid => generate_guid,
+ partitionEntriesLBA => 2,
+ nbPartitions => $nb_sect * 512 / psizeof($partitionEntry_format),
+ partitionEntrySize => psizeof($partitionEntry_format),
+ };
+}
+
+sub clear_raw {
+ my ($hd) = @_;
+ { raw => [], info => info($hd) };
+}
+
+1;
diff --git a/perl-install/partition_table/lvm_PV.pm b/perl-install/partition_table/lvm_PV.pm
new file mode 100644
index 000000000..4a55d3810
--- /dev/null
+++ b/perl-install/partition_table/lvm_PV.pm
@@ -0,0 +1,43 @@
+package partition_table::lvm; # $Id$
+
+use diagnostics;
+use strict;
+
+our @ISA = qw(partition_table::raw);
+
+use partition_table::raw;
+use c;
+
+my $magic = "HM\1\0";
+my $offset = 0;
+
+
+#- Allows people having PVs on unpartitioned disks to install
+#- (but no way to create such beasts)
+#-
+#- another way to handle them would be to ignore those disks,
+#- but this would make those hds unshown in diskdrake,
+#- disallowing to zero_MBR, clearing this PV
+
+
+sub read {
+ my ($hd, $sector) = @_;
+
+ local *F; partition_table::raw::openit($hd, *F) or die "failed to open device";
+ c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed";
+
+ sysread F, my $tmp, length $magic or die "error reading magic number on disk $hd->{file}";
+ $tmp eq $magic or die "bad magic number on disk $hd->{file}";
+
+ [ ];
+}
+
+sub write {
+ die "ERROR: should not be writing raw disk lvm PV!!";
+}
+
+sub clear_raw {
+ die "ERROR: should not be creating new raw disk lvm PV!!";
+}
+
+1;
diff --git a/perl-install/partition_table/mac.pm b/perl-install/partition_table/mac.pm
new file mode 100644
index 000000000..89fb9ceaf
--- /dev/null
+++ b/perl-install/partition_table/mac.pm
@@ -0,0 +1,398 @@
+package partition_table::mac; # $Id$
+
+use diagnostics;
+#use strict; - fixed other PPC code to comply, but program bails on empty partition table - sbenedict
+use vars qw(@ISA $freepart_device $bootstrap_part $freepart_start $freepart_size $freepart_part $macos_part);
+
+@ISA = qw(partition_table::raw);
+
+use common;
+use partition_table::raw;
+use partition_table;
+use c;
+
+my %typeToDos = (
+ "Apple_partition_map" => 0x401,
+ "Apple_Bootstrap" => 0x401,
+ "Apple_Driver43" => 0x401,
+ "Apple_Driver_IOKit" => 0x401,
+ "Apple_Patches" => 0x401,
+ "Apple_HFS" => 0x402,
+ "Apple_UNIX_SVR2" => 0x83,
+ "Apple_UNIX_SVR2" => 0x183,
+ "Apple_UNIX_SVR2" => 0x283,
+ "Apple_UNIX_SVR2" => 0x383,
+ "Apple_UNIX_SVR2" => 0x483,
+ "Apple_Free" => 0x0,
+);
+my %typeFromDos = reverse %typeToDos;
+
+
+my ($bz_format, $bz_fields) = list2kv(
+ n => 'bzSig',
+ n => 'bzBlkSize',
+ N => 'bzBlkCnt',
+ n => 'bzDevType',
+ n => 'bzDevID',
+ N => 'bzReserved',
+ n => 'bzDrvrCnt',
+);
+$bz_format = join '', @$bz_format;
+
+
+my ($dd_format, $dd_fields) = list2kv(
+ N => 'ddBlock',
+ n => 'ddSize',
+ n => 'ddType',
+);
+$dd_format = join '', @$dd_format;
+
+
+my ($p_format, $p_fields) = list2kv(
+ n => 'pSig',
+ n => 'pSigPad',
+ N => 'pMapEntry',
+ N => 'pPBlockStart',
+ N => 'pPBlocks',
+
+ a32 => 'pName',
+ a32 => 'pType',
+
+ N => 'pLBlockStart',
+ N => 'pLBlocks',
+ N => 'pFlags',
+ N => 'pBootBlock',
+ N => 'pBootBytes',
+
+ N => 'pAddrs1',
+ N => 'pAddrs2',
+ N => 'pAddrs3',
+ N => 'pAddrs4',
+ N => 'pChecksum',
+
+ a16 => 'pProcID',
+ a128 => 'pBootArgs',
+ a248 => 'pReserved',
+);
+$p_format = join '', @$p_format;
+
+my $magic = 0x4552;
+my $pmagic = 0x504D;
+
+sub first_usable_sector { 1 }
+
+sub adjustStart($$) {
+ my ($hd, $part) = @_;
+ my $end = $part->{start} + $part->{size};
+ my $partmap_end = $hd->{primary}{raw}[0]{size};
+
+ if ($part->{start} <= $partmap_end) {
+ $part->{start} = $partmap_end + 1;
+ $part->{size} = $end - $part->{start};
+ }
+}
+
+sub adjustEnd($$) {
+ my ($hd, $part) = @_;
+}
+
+sub read($$) {
+ my ($hd, $sector) = @_;
+ my $tmp;
+
+ local *F; partition_table::raw::openit($hd, *F) or die "failed to open device";
+ c::lseek_sector(fileno(F), $sector, 0) or die "reading of partition in sector $sector failed";
+
+ sysread F, $tmp, psizeof($bz_format) or die "error while reading bz \(Block Zero\) in sector $sector";
+ my %info; @info{@$bz_fields} = unpack $bz_format, $tmp;
+ my $i;
+
+ foreach $i (0 .. $info{bzDrvrCnt}-1) {
+ sysread F, $tmp, psizeof($dd_format) or die "error while reading driver data in sector $sector";
+ my %dd; @dd{@$dd_fields} = unpack $dd_format, $tmp;
+ push @{$info{ddMap}}, \%dd;
+ }
+
+ #- check magic number
+ $info{bzSig} == $magic or die "bad magic number on disk $hd->{device}";
+
+ my $numparts;
+ c::lseek_sector(fileno(F), $sector, 516) or die "reading of partition in sector $sector failed";
+ sysread F, $tmp, 4 or die "error while reading partition info in sector $sector";
+ $numparts = unpack "N", $tmp;
+
+ my $partmapsize;
+ c::lseek_sector(fileno(F), $sector, 524) or die "reading of partition in sector $sector failed";
+ sysread F, $tmp, 4 or die "error while reading partition info in sector $sector";
+ $partmapsize = ((unpack "N", $tmp) * $info{bzBlkSize}) / psizeof($p_format);
+
+ c::lseek_sector(fileno(F), $sector, 512) or die "reading of partition in sector $sector failed";
+
+ my @pt;
+ for ($i=0;$i<$partmapsize;$i++) {
+ my $part;
+ sysread F, $part, psizeof($p_format) or die "error while reading partition info in sector $sector";
+
+ push @pt, map {
+ my %h; @h{@$p_fields} = unpack $p_format, $part;
+ if ($i < $numparts && $h{pSig} eq $pmagic) {
+
+ $h{size} = ($h{pPBlocks} * $info{bzBlkSize}) / 512;
+ $h{start} = ($h{pPBlockStart} * $info{bzBlkSize}) / 512;
+
+ if ($h{pType} =~ /^Apple_UNIX_SVR2/i) {
+ $h{pName} =~ /swap/i ? ($h{type} = 0x82) : ($h{type} = 0x83);
+ } elsif ($h{pType} =~ /^Apple_Free/i) {
+ #- need to locate a 1MB partition to setup a bootstrap on
+ if (defined $freepart_start && $freepart_size >= 1) {
+ #- already found a suitable partition
+ } else {
+ $freepart_start = $h{start};
+ $freepart_size = $h{size}/2048;
+ $freepart_device = $hd;
+ $freepart_part = "/dev/" . $hd->{device} . ($i+1);
+ log::l("free apple partition found on drive /dev/$freepart_device->{device}, block $freepart_start, size $freepart_size");
+ }
+ $h{type} = 0x0;
+ $h{pName} = 'Extra';
+ } elsif ($h{pType} =~ /^Apple_HFS/i) {
+ $h{type} = 0x402;
+ if (defined $macos_part) {
+ #- swag at identifying MacOS - 1st HFS partition
+ } else {
+ $macos_part = "/dev/" . $hd->{device} . ($i+1);
+ log::l("found MacOS at partition $macos_part");
+ }
+ } elsif ($h{pType} =~ /^Apple_Partition_Map/i) {
+ $h{type} = 0x401;
+ $h{isMap} = 1;
+ } elsif ($h{pType} =~ /^Apple_Bootstrap/i) {
+ $h{type} = 0x401;
+ $h{isBoot} = 1;
+ if (defined $bootstrap_part) {
+ #found a bootstrap already - use it, but log the find
+ log::l("found another apple bootstrap at partition /dev/$hd->{device}" . ($i+1));
+ } else {
+ $bootstrap_part = "/dev/" . $hd->{device} . ($i+1);
+ log::l("found apple bootstrap at partition $bootstrap_part");
+ }
+ } else {
+ $h{type} = 0x401;
+ $h{isDriver} = 1;
+ };
+
+ # Let's see if this partition is a driver.
+ foreach (@{$info{ddMap}}) {
+ $_->{ddBlock} == $h{pPBlockStart} and $h{isDriver} = 1;
+ }
+
+ }
+ \%h;
+ } [ $part ];
+ };
+
+ [ @pt ], \%info;
+}
+
+sub write($$$;$) {
+ my ($hd, $sector, $pt, $info) = @_;
+
+ #- handle testing for writing partition table on file only!
+ local *F;
+ if ($::testing) {
+ my $file = "/tmp/partition_table_$hd->{device}";
+ open F, ">$file" or die "error opening test file $file";
+ } else {
+ partition_table::raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+ c::lseek_sector(fileno(F), $sector, 0) or return 0;
+ }
+
+ # Find the partition map.
+ my @partstowrite;
+ my $part = $pt->[0];
+ (defined $part->{isMap}) or die "the first partition is not the partition map";
+ push @partstowrite, $part;
+
+ # Now go thru the partitions, sort and fill gaps.
+ my $last;
+ while ($part) {
+ $last = $part;
+ $part = &partition_table::next($hd, $part);
+ $part or last;
+
+ if ($last->{start} + $last->{size} < $part->{start}) {
+ #There is a gap between partitions. Fill it and move on.
+ push @partstowrite, {
+ type => 0x0,
+ start => $last->{start} + $last->{size},
+ size => $part->{start} - ($last->{start} + $last->{size}),
+ };
+ }
+ push @partstowrite, $part;
+ };
+
+ # now, fill a gap at the end if there is one.
+ if ($last->{start} + $last->{size} < $hd->{totalsectors}) {
+ push @partstowrite, {
+ type => 0x0,
+ start => $last->{start} + $last->{size},
+ size => $hd->{totalsectors} - ($last->{start} + $last->{size}),
+ };
+ }
+
+ # Since we didn't create any new drivers, let's try and match up our driver records with out partitons and see if any are missing.
+ $info->{bzDrvrCnt} = 0;
+ my @ddstowrite;
+ my $dd;
+ foreach $dd (@{$info->{ddMap}}) {
+ foreach (@partstowrite) {
+ if ($dd->{ddBlock} == $_->{pPBlockStart}) {
+ push @ddstowrite, $dd;
+ $info->{bzDrvrCnt}++;
+ last;
+ }
+ }
+ }
+
+ # Now let's write our first block.
+ syswrite F, pack($bz_format, @$info{@$bz_fields}), psizeof($bz_format) or return 0;
+
+ # ...and now the driver information.
+ foreach (@ddstowrite) {
+ syswrite F, pack($dd_format, @$_{@$dd_fields}), psizeof($dd_format) or return 0;
+ }
+ # zero the rest of the data in the first block.
+ foreach ( 1 .. (494 - ((@ddstowrite) * 8))) {
+ syswrite F, "\0", 1 or return 0;
+ }
+ #c::lseek_sector(fileno(F), $sector, 512) or return 0;
+ # Now, we iterate thru the partstowrite and write them.
+ foreach (@partstowrite) {
+ if (!defined $_->{pSig}) {
+ # The values we need to write to disk are not defined. Let's make them up.
+ $_->{pSig} = $pmagic;
+ $_->{pSigPad} = 0;
+ $_->{pPBlockStart} = ($_->{start} * 512) / $info->{bzBlkSize};
+ $_->{pPBlocks} = ($_->{size} * 512) / $info->{bzBlkSize};
+ $_->{pLBlockStart} = 0;
+ $_->{pLBlocks} = $_->{pPBlocks};
+ $_->{pBootBlock} = 0;
+ $_->{pBootBytes} = 0;
+ $_->{pAddrs1} = 0;
+ $_->{pAddrs2} = 0;
+ $_->{pAddrs3} = 0;
+ $_->{pAddrs4} = 0;
+ $_->{pChecksum} = 0;
+ $_->{pProcID} = "\0";
+ $_->{pBootArgs} = "\0";
+ $_->{pReserved} = "\0";
+
+ if ($_->{type} == 0x402) {
+ $_->{pType} = "Apple_HFS";
+ $_->{pName} = "MacOS";
+ $_->{pFlags} = 0x4000037F;
+ } elsif ($_->{type} == 0x401 && $_->{start} == 1) {
+ $_->{pType} = "Apple_Partition_Map";
+ $_->{pName} = "Apple";
+ $_->{pFlags} = 0x33;
+ } elsif ($_->{type} == 0x401) {
+ $_->{pType} = "Apple_Bootstrap";
+ $_->{pName} = "bootstrap";
+ $_->{pFlags} = 0x33;
+ $_->{isBoot} = 1;
+ log::l("writing a bootstrap at /dev/$_->{device}");
+ $install_steps_interactive::new_bootstrap = 1 if !(defined $partition_table::mac::bootstrap_part);
+ $bootstrap_part = "/dev/" . $_->{device};
+ } elsif ($_->{type} == 0x82) {
+ $_->{pType} = "Apple_UNIX_SVR2";
+ $_->{pName} = "swap";
+ $_->{pFlags} = 0x33;
+ } elsif ($_->{type} == 0x83) {
+ $_->{pType} = "Apple_UNIX_SVR2";
+ $_->{pName} = "Linux Native";
+ $_->{pFlags} = 0x33;
+ } elsif ($_->{type} == 0x183) {
+ $_->{pType} = "Apple_UNIX_SVR2";
+ $_->{pName} = "Linux ReiserFS";
+ $_->{pFlags} = 0x33;
+ } elsif ($_->{type} == 0x283) {
+ $_->{pType} = "Apple_UNIX_SVR2";
+ $_->{pName} = "Linux XFS";
+ $_->{pFlags} = 0x33;
+ } elsif ($_->{type} == 0x383) {
+ $_->{pType} = "Apple_UNIX_SVR2";
+ $_->{pName} = "Linux JFS";
+ $_->{pFlags} = 0x33;
+ } elsif ($_->{type} == 0x483) {
+ $_->{pType} = "Apple_UNIX_SVR2";
+ $_->{pName} = "Linux ext3";
+ $_->{pFlags} = 0x33;
+ } elsif ($_->{type} == 0x0) {
+ $_->{pType} = "Apple_Free";
+ $_->{pName} = "Extra";
+ $_->{pFlags} = 0x31;
+ }
+ };
+ $_->{pMapEntry} = @partstowrite;
+ syswrite F, pack($p_format, @$_{@$p_fields}), psizeof($p_format) or return 0;
+ }
+
+ common::sync();
+
+ 1;
+}
+
+sub info {
+ my ($hd) = @_;
+
+ # - Build the first block of the drive.
+
+ my $info = {
+ bzSig => $magic,
+ bzBlkSize => 512,
+ bzBlkCnt => $hd->{totalsectors},
+ bzDevType => 0,
+ bzDevID => 0,
+ bzReserved => 0,
+ bzDrvrCnt => 0,
+ };
+
+ $info;
+}
+
+sub clear_raw {
+ my ($hd) = @_;
+ my @oldraw = @{$hd->{primary}{raw}};
+ my $pt = { raw => [ ({}) x 63 ], info => info($hd) };
+
+ #- handle special case for partition 1 which is the partition map.
+ $pt->{raw}[0] = {
+ type => 0x401,
+ start => 1,
+ size => 63,
+ isMap => 1,
+ };
+# $pt->{raw}[1] = {
+# type => 0x0,
+# start => 64,
+# size => $hd->{totalsectors} - 64,
+# isMap => 0,
+# };
+ push @{$pt->{normal}}, $pt->{raw}[0];
+# push @{$pt->{normal}}, $pt->{raw}[1];
+
+ #- Recover any Apple Drivers, if any.
+ my $i = 1;
+ foreach (@oldraw) {
+ if (defined $_->{isDriver}) {
+ $pt->{raw}[$i] = $_;
+ push @{$pt->{normal}}, $pt->{raw}[$i];
+ $i++;
+ }
+ };
+ @{$pt->{info}{ddMap}} = @{$hd->{primary}{info}{ddMap}};
+
+ $pt;
+}
+
+1;
diff --git a/perl-install/partition_table/raw.pm b/perl-install/partition_table/raw.pm
new file mode 100644
index 000000000..3be68fe56
--- /dev/null
+++ b/perl-install/partition_table/raw.pm
@@ -0,0 +1,192 @@
+package partition_table::raw; # $Id$
+
+use diagnostics;
+use strict;
+
+use common;
+use devices;
+use detect_devices;
+use log;
+use c;
+
+my @MBR_signatures = (
+if_(arch() =~ /ppc/,
+ map { [ 'yaboot', 0, "PM", 0x200 * $_ + 0x10, "bootstrap\0" ] } 0 .. 61
+),
+ [ 'empty', 0, "\0\0\0\0" ],
+ [ 'grub', 0, "\xEBG", 0x17d, "stage1 \0" ],
+ [ 'grub', 0, "\xEBH", 0x17e, "stage1 \0" ],
+ [ 'grub', 0, "\xEBH", 0x18a, "stage1 \0" ],
+ [ 'grub', 0, "\xEBH", 0x181, "GRUB \0" ],
+ [ 'lilo', 0x2, "LILO" ],
+ [ 'lilo', 0x6, "LILO" ],
+ [ 'grub', 0x6, "GRUB" ],
+ [ 'osbs', 0x2, "OSBS" ], #- http://www.prz.tu-berlin.de/~wolf/os-bs.html
+ [ 'pqmagic', 0xef, "PQV" ],
+ [ 'BootStar', 0x130, "BootStar:" ],
+ [ 'DocsBoot', 0x148, 'DocsBoot' ],
+ [ 'system_commander', 0x1ad, "SYSCMNDRSYS" ],
+ [ 'Be Os', 0x24, 'Boot Manager' ],
+ [ 'TimO', 0, 'IBM Thinkpad hibernation partition' ],
+ [ 'dos', 0xa0, "\x25\x03\x4E\x02\xCD\x13" ],
+ [ 'dos', 0xa0, "\x00\xB4\x08\xCD\x13\x72" ], #- nt2k's
+ [ 'dos', 0x60, "\xBB\x00\x7C\xB8\x01\x02\x57\xCD\x13\x5F\x73\x0C\x33\xC0\xCD\x13" ], #- nt's
+ [ 'dos', 0x70, "\x0C\x33\xC0\xCD\x13\x4F\x75\xED\xBE\xA3" ],
+ [ 'freebsd', 0xC0, "\x00\x30\xE4\xCD\x16\xCD\x19\xBB\x07\x00\xB4" ],
+ [ 'freebsd', 0x160, "\x6A\x10\x89\xE6\x48\x80\xCC\x40\xCD\x13" ],
+ [ 'dummy', 0xAC, "\x0E\xB3\x07\x56\xCD\x10\x5E\xEB" ], #- caldera?
+ [ 'ranish', 0x100, "\x6A\x10\xB4\x42\x8B\xF4\xCD\x13\x8B\xE5\x73" ],
+ [ 'os2', 0x1c2, "\xA" ],
+);
+
+sub typeOfMBR($) { typeFromMagic(devices::make($_[0]), @MBR_signatures) }
+sub typeOfMBR_($) { typeFromMagic($_[0], @MBR_signatures) }
+
+sub hasExtended { 0 }
+
+sub cylinder_size($) {
+ my ($hd) = @_;
+ $hd->{geom}{sectors} * $hd->{geom}{heads};
+}
+sub first_usable_sector { 1 }
+sub last_usable_sector {
+ my ($hd) = @_;
+ $hd->{totalsectors};
+}
+
+#- default method for starting a partition, only head size or twice
+#- is allowed for starting a partition after a cylinder boundarie.
+sub adjustStart($$) {
+ my ($hd, $part) = @_;
+ my $end = $part->{start} + $part->{size};
+
+ $part->{start} = round_up($part->{start},
+ $part->{start} % cylinder_size($hd) < 2 * $hd->{geom}{sectors} ?
+ $hd->{geom}{sectors} : cylinder_size($hd));
+ $part->{size} = $end - $part->{start};
+ $part->{size} > 0 or die "adjustStart get a too small partition to handle correctly";
+}
+#- adjusting end to match a cylinder boundary, two methods are used and must
+#- match at the end, else something is wrong and nothing will be done on
+#- partition table.
+#- $end2 is computed by removing 2 (or only 1 if only 2 heads on drive) groups
+#- of sectors, this is necessary to handle extended partition where logical
+#- partition start after 1 (or 2 accepted) groups of sectors (typically 63).
+#- $end is floating (is not on cylinder boudary) so we have to choice a good
+#- candidate, $end1 or $end2 should always be good except $end1 for small
+#- partition size.
+sub adjustEnd($$) {
+ my ($hd, $part) = @_;
+ my $end = $part->{start} + $part->{size};
+ $end > $hd->{geom}{cylinders} * cylinder_size($hd) && $end <= $hd->{totalsectors} and return;
+ my $end1 = round_down($end, cylinder_size($hd));
+ my $end2 = round_up($end - ($hd->{geom}{heads} > 2 ? 2 : 1) * $hd->{geom}{sectors}, cylinder_size($hd));
+ $end2 <= $hd->{geom}{cylinders} * cylinder_size($hd) or die "adjustEnd go beyond end of device geometry ($end2 > $hd->{totalsectors})";
+ $part->{size} = ($end1 - $part->{start} > cylinder_size($hd) ? $end1 : $end2) - $part->{start};
+ $part->{size} > 0 or die "adjustEnd get a too small partition to handle correctly";
+}
+
+sub get_geometry($) {
+ my ($dev) = @_;
+ my $g = "";
+
+ local *F; sysopen F, $dev, 0 or return;
+ ioctl(F, c::HDIO_GETGEO(), $g) or return;
+ my %geom; @geom{qw(heads sectors cylinders start)} = unpack "CCSL", $g;
+ $geom{totalcylinders} = $geom{cylinders};
+
+ my $total;
+ #- $geom{cylinders} is no good (only a ushort, that means less than 2^16 => at best 512MB)
+ if ($total = c::total_sectors(fileno F)) {
+ $geom{cylinders} = int $total / $geom{heads} / $geom{sectors};
+ } else {
+ $total = $geom{heads} * $geom{sectors} * $geom{cylinders}
+ }
+
+ { geom => \%geom, totalsectors => $total };
+}
+
+sub openit($$;$) { sysopen $_[1], $_[0]{file}, $_[2] || 0; }
+
+# cause kernel to re-read partition table
+sub kernel_read($) {
+ my ($hd) = @_;
+ common::sync();
+ local *F; openit($hd, *F) or return 0;
+ common::sync(); sleep(1);
+ $hd->{rebootNeeded} = !ioctl(F, c::BLKRRPART(), 0);
+ common::sync();
+ close F;
+ common::sync(); sleep(1);
+}
+
+sub raw_removed {
+ my ($hd, $raw) = @_;
+}
+sub can_raw_add {
+ my ($hd) = @_;
+ $_->{size} || $_->{type} or return 1 foreach @{$hd->{primary}{raw}};
+ 0;
+}
+sub raw_add {
+ my ($hd, $raw, $part) = @_;
+
+ foreach (@$raw) {
+ $_->{size} || $_->{type} and next;
+ $_ = $part;
+ return;
+ }
+ die "raw_add: partition table already full";
+}
+
+sub zero_MBR {
+ my ($hd) = @_;
+ #- force the standard partition type for the architecture
+ my $type = arch() =~ /ia64/ ? 'gpt' : arch() eq "alpha" ? "bsd" : arch() =~ /^sparc/ ? "sun" : arch() eq "ppc" ? "mac" : "dos";
+ #- override standard mac type on PPC for IBM machines to dos
+ $type = "dos" if (arch() =~ /ppc/ && detect_devices::get_mac_model() =~ /^IBM/);
+ require("partition_table/$type.pm");
+ bless $hd, "partition_table::$type";
+ $hd->{primary} = $hd->clear_raw();
+ delete $hd->{extended};
+}
+
+sub zero_MBR_and_dirty {
+ my ($hd) = @_;
+ zero_MBR($hd);
+ $hd->{isDirty} = $hd->{needKernelReread} = 1;
+
+}
+
+#- ugly stuff needed mainly for Western Digital IDE drives
+#- try writing what we've just read, yells if it fails
+#- testing on last sector of head #0 (unused in 99% cases)
+#-
+#- return false if the device can't be written to (especially for Smartmedia)
+sub test_for_bad_drives {
+ my ($hd) = @_;
+
+ log::l("test_for_bad_drives($hd->{file})");
+ my $sector = $hd->{geom}{sectors} - 1;
+
+
+ local *F; openit($hd, *F, 2) or die "can't open device";
+
+ my $seek = sub {
+ c::lseek_sector(fileno(F), $sector, 0) or die "seeking to sector $sector failed";
+ };
+ my $tmp;
+
+ &$seek; sysread F, $tmp, $SECTORSIZE or die "test_for_bad_drives: can't even read ($!)";
+ &$seek; syswrite F, $tmp or die "test_for_bad_drives: can't even write ($!)";
+
+ my $tmp2;
+ &$seek; sysread F, $tmp2, $SECTORSIZE or die "test_for_bad_drives: can't even read again ($!)";
+ $tmp eq $tmp2 or die
+_("Something bad is happening on your drive.
+A test to check the integrity of data has failed.
+It means writing anything on the disk will end up with random trash");
+ 1;
+}
+
+1;
diff --git a/perl-install/partition_table/sun.pm b/perl-install/partition_table/sun.pm
new file mode 100644
index 000000000..6944130dc
--- /dev/null
+++ b/perl-install/partition_table/sun.pm
@@ -0,0 +1,201 @@
+package partition_table::sun; # $Id$
+
+use diagnostics;
+use strict;
+use vars qw(@ISA);
+
+@ISA = qw(partition_table::raw);
+
+use common;
+use partition_table::raw;
+use partition_table;
+use c;
+
+my ($main_format, $main_fields) = list2kv(
+ a128 => 'info',
+ a14 => 'spare0',
+ a32 => 'infos',
+ a246 => 'spare1',
+ n => 'rspeed',
+ n => 'pcylcount',
+ n => 'sparecyl',
+ a4 => 'spare2',
+ n => 'ilfact',
+ n => 'ncyl',
+ n => 'nacyl',
+ n => 'ntrks',
+ n => 'nsect',
+ a4 => 'spare3',
+ a64 => 'partitions',
+ n => 'magic',
+ n => 'csum',
+);
+$main_format = join '', @$main_format;
+
+my ($fields1, $fields2) = ([ qw(type flags) ], [ qw(start_cylinder size) ]);
+my ($format1, $format2) = ("xCxC", "N2");
+my ($size1, $size2) = map { psizeof($_) } ($format1, $format2);
+my $magic = 0xDABE;
+my $nb_primary = 8;
+my $offset = 0;
+
+sub adjustStart($$) {
+ my ($hd, $part) = @_;
+ my $end = $part->{start} + $part->{size};
+
+ #- since partition must always start on cylinders boundaries on sparc,
+ #- note that if start sector is on the first cylinder, it is adjusted
+ #- to 0 and it is valid, cylinder 0 bug is from bad define for sparc
+ #- compilation of mke2fs combined with a blind kernel...
+ $part->{start} = round_down($part->{start}, $hd->cylinder_size());
+ $part->{size} = $end - $part->{start};
+ $part->{size} = $hd->cylinder_size() if $part->{size} <= 0;
+}
+sub adjustEnd($$) {
+ my ($hd, $part) = @_;
+ my $end = $part->{start} + $part->{size};
+ my $end2 = round_up($end, $hd->cylinder_size());
+ $end2 = $hd->{geom}{cylinders} * $hd->cylinder_size() if $end2 > $hd->{geom}{cylinders} * $hd->cylinder_size();
+ $part->{size} = $end2 - $part->{start};
+}
+
+#- compute crc checksum used for Sun Label partition, expect
+#- $tmp to be the 512 bytes buffer to be read/written to MBR.
+sub compute_crc($) {
+ my ($tmp) = @_;
+ my @l2b = unpack "n256", $tmp;
+ my $crc = 0;
+
+ map { $crc ^= $_ } @l2b;
+
+ $crc;
+}
+
+sub read($$) {
+ my ($hd, $sector) = @_;
+ my $tmp;
+
+ local *F; partition_table::raw::openit($hd, *F) or die "failed to open device";
+ c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed";
+
+ sysread F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
+ my %info; @info{@$main_fields} = unpack $main_format, $tmp;
+
+ #- check magic number
+ $info{magic} == $magic or die "bad magic number on disk $hd->{device}";
+
+ #- check crc, csum contains the crc so result should be 0.
+ compute_crc($tmp) == 0 or die "bad checksum";
+
+ @{$hd->{geom}}{qw(cylinders heads sectors)} = @info{qw(ncyl ntrks nsect)};
+
+ my @pt;
+ my @infos_up = unpack $format1 x $nb_primary, $info{infos};
+ my @partitions_up = unpack $format2 x $nb_primary, $info{partitions};
+ for (0..$nb_primary-1) {
+ my $h = { type => $infos_up[2 * $_], flag => $infos_up[1 + 2 * $_],
+ start_cylinder => $partitions_up[2 * $_], size => $partitions_up[1 + 2 * $_] };
+ $h->{start} = $sector + $h->{start_cylinder} * $hd->cylinder_size();
+ $h->{type} && $h->{size} or $h->{$_} = 0 foreach keys %$h;
+ push @pt, $h;
+ }
+
+#- this code is completely broken by null char inside strings, it gets completely crazy :-)
+# my @pt = mapn {
+# my %h;
+# @h{@$fields1} = unpack $format1, $_[0];
+# @h{@$fields2} = unpack $format2, $_[1];
+# $h{start} = $sector + $h{start_cylinder} * $hd->cylinder_size();
+# $h{type} && $h{size} or $h{$_} = 0 foreach keys %h;
+# \%h;
+# } [ grep { $_ } split /(.{$size1})/o, $info{infos} ], [ grep { $_ } split /(.{$size2})/o, $info{partitions} ];
+
+ [ @pt ], \%info;
+}
+
+# write the partition table (and extended ones)
+# for each entry, it uses fields: start, size, type, active
+sub write($$$;$) {
+ my ($hd, $sector, $pt, $info) = @_;
+# my ($csize, $wdsize) = (0, 0);
+
+ #- handle testing for writing partition table on file only!
+ local *F;
+ if ($::testing) {
+ my $file = "/tmp/partition_table_$hd->{device}";
+ open F, ">$file" or die "error opening test file $file";
+ } else {
+ partition_table::raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+ c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+ }
+
+ ($info->{infos}, $info->{partitions}) = map { join '', @$_ } list2kv map {
+ $_->{start} % $hd->cylinder_size() == 0 or die "partition not at beginning of cylinder";
+# $csize += $_->{size} if $_->{type} != 5;
+# $wdsize += $_->{size} if $_->{type} == 5;
+ $_->{flags} |= 0x10 if $_->{mntpoint} eq '/';
+ $_->{flags} |= 0x01 if partition_table::isSwap($_);
+ local $_->{start_cylinder} = $_->{start} / $hd->cylinder_size() - $sector;
+ pack($format1, @$_{@$fields1}), pack($format2, @$_{@$fields2});
+ } @$pt;
+# $csize == $wdsize or die "partitions are not using whole disk space";
+
+ #- compute the checksum by building the buffer to write and call compute_crc.
+ #- set csum to 0 so compute_crc will give the right csum value.
+ $info->{csum} = 0;
+ $info->{csum} = compute_crc(pack($main_format, @$info{@$main_fields}));
+
+ syswrite F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
+
+ common::sync();
+
+ 1;
+}
+
+sub info {
+ my ($hd) = @_;
+
+ #- take care of reduction of the number of cylinders, avoid loop of reduction!
+ unless ($hd->{geom}{totalcylinders} > $hd->{geom}{cylinders}) {
+ $hd->{geom}{totalcylinders} = $hd->{geom}{cylinders};
+ $hd->{geom}{cylinders} -= 2;
+
+ #- rebuild some constants according to number of cylinders.
+ $hd->{totalsectors} = $hd->{geom}{heads} * $hd->{geom}{sectors} * $hd->{geom}{cylinders};
+ }
+
+ #- build a default suitable partition table,
+ #- checksum will be built when writing on disk.
+ #- note third partition is ALWAYS of type Whole disk.
+ my $info = {
+ info => "DiskDrake partition table",
+ rspeed => 5400,
+ pcylcount => $hd->{geom}{totalcylinders},
+ sparecyl => 0,
+ ilfact => 1,
+ ncyl => $hd->{geom}{cylinders},
+ nacyl => $hd->{geom}{totalcylinders} - $hd->{geom}{cylinders},
+ ntrks => $hd->{geom}{heads},
+ nsect => $hd->{geom}{sectors},
+ magic => $magic,
+ };
+
+ $info;
+}
+
+sub clear_raw {
+ my ($hd) = @_;
+ my $pt = { raw => [ ({}) x $nb_primary ], info => info($hd) };
+
+ #- handle special case for partition 2 which is whole disk.
+ $pt->{raw}[2] = {
+ type => 5, #- the whole disk type.
+ flags => 0,
+ start_cylinder => 0,
+ size => $hd->{geom}{cylinders} * $hd->cylinder_size(),
+ };
+
+ $pt;
+}
+
+1;