diff options
Diffstat (limited to 'perl-install/help.pm')
| -rw-r--r-- | perl-install/help.pm | 1087 |
1 files changed, 0 insertions, 1087 deletions
diff --git a/perl-install/help.pm b/perl-install/help.pm deleted file mode 100644 index b1ad37b26..000000000 --- a/perl-install/help.pm +++ /dev/null @@ -1,1087 +0,0 @@ -package help; # $Id$ - -use common qw(:common); - -%steps = ( -empty => '', - -selectLanguage => - __("Please choose your preferred language for installation and system usage."), - -license => - __("You need to accept the terms of the above license to continue installation. - - -Please click on \"Accept\" if you agree with its terms. - - -Please click on \"Refuse\" if you disagree with its terms. Installation will end without modifying your current -configuration."), - -selectKeyboard => - __("Choose the layout corresponding to your keyboard from the list above"), - -selectLangs => - __("If you wish other languages (than the one you choose at -beginning of installation) will be available after installation, please chose -them in list above. If you want select all, you just need to select \"All\"."), - -selectInstallClass => - __("Please choose \"Install\" if there are no previous version of Linux-Mandrake -installed or if you wish to use several operating systems. - - -Please choose \"Update\" if you wish to update an already installed version of Linux-Mandrake. - - -Depend of your knowledge in GNU/Linux, you can choose one of the following levels to install or update your -Linux-Mandrake operating system: - - * Recommended: if you have never installed a GNU/Linux operating system choose this. Installation will be - be very easy and you will be asked only on few questions. - - - * Customized: if you are familiar enough with GNU/Linux, you may choose the primary usage (workstation, server, - development) of your system. You will need to answer to more questions than in \"Recommended\" installation - class, so you need to know how GNU/Linux works to choose this installation class. - - - * Expert: if you have a good knowledge in GNU/Linux, you can choose this installation class. As in \"Customized\" - installation class, you will be able to choose the primary usage (workstation, server, development). Be very - careful before choose this installation class. You will be able to perform a higly customized installation. - Answer to some questions can be very difficult if you haven't a good knowledge in GNU/Linux. So, don't choose - this installation class unless you know what you are doing."), - -selectInstallClassCorpo => - __("Select: - - - Customized: If you are familiar enough with GNU/Linux, you may then choose - the primary usage for your machine. See below for details. - - - - Expert: This supposes that you are fluent with GNU/Linux and want to - perform a highly customized installation. As for a \"Customized\" - installation class, you will be able to select the usage for your system. - But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE DOING!"), - -selectInstallClass2 => - __("You must now define your machine usage. Choices are: - - * Workstation: this the ideal choice if you intend to use your machine primarily for everyday use, at office or - at home. - - - * Development: if you intend to use your machine primarily for software development, it is the good choice. You - will then have a complete collection of software installed in order to compile, debug and format source code, - or create software packages. - - - * Server: if you intend to use this machine as a server, it is the good choice. Either a file server (NFS or - SMB), a print server (Unix style or Microsoft Windows style), an authentication server (NIS), a database - server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) to be installed."), - -setupSCSI => - __("DrakX will attempt to look for PCI SCSI adapter(s). If DrakX -finds an SCSI adapter and knows which driver to use, it will be automatically -installed. - - -If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that -DrakX doesn't recognize, you will be asked if a SCSI adapter is present in your -system. If there is no adapter present, you can click on \"No\". If you click on -\"Yes\", a list of drivers will be presented from which you can select your -specific adapter. - - -If you have to manually specify your adapter, DrakX will ask if you want to -specify options for it. You should allow DrakX to probe the hardware for the -options. This usually works well. - - -If not, you will need to provide options to the driver. Please review the User -Guide (chapter 3, section \"Collective informations on your hardware) for hints -on retrieving this information from hardware documentation, from the -manufacturer's Web site (if you have Internet access) or from Microsoft Windows -(if you have it on your system)."), - -doPartitionDisks => - __("At this point, you need to choose where to install your -Linux-Mandrake operating system on your hard drive. If it is empty or if an -existing operating system uses all the space available on it, you need to -partition it. Basically, partitioning a hard drive consists of logically -dividing it to create space to install your new Linux-Mandrake system. - - -Because the effects of the partitioning process are usually irreversible, -partitioning can be intimidating and stressful if you are an inexperienced user. -This wizard simplifies this process. Before beginning, please consult the manual -and take your time. - - -You need at least two partitions. One is for the operating system itself and the -other is for the virtual memory (also called Swap). - - -If partitions have been already defined (from a previous installation or from -another partitioning tool), you just need choose those to use to install your -Linux system. - - -If partitions haven't been already defined, you need to create them. -To do that, use the wizard available above. Depending of your hard drive -configuration, several solutions can be available: - - * Use existing partition: the wizard has detected one or more existing Linux partitions on your hard drive. If - you want to keep them, choose this option. - - - * Erase entire disk: if you want delete all data and all partitions present on your hard drive and replace them by - your new Linux-Mandrake system, you can choose this option. Be careful with this solution, you will not be - able to revert your choice after confirmation. - - - * Use the free space on the Windows partition: if Microsoft Windows is installed on your hard drive and takes - all space available on it, you have to create free space for Linux data. To do that you can delete your - Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert mode\" solutions) or resize your - Microsoft Windows partition. Resizing can be performed without loss of any data. This solution is - recommended if you want use both Linux-Mandrake and Microsoft Windows on same computer. - - - Before choosing this solution, please understand that the size of your Microsoft - Windows partition will be smaller than at present time. It means that you will have less free space under - Microsoft Windows to store your data or install new software. - - - * Expert mode: if you want to partition manually your hard drive, you can choose this option. Be careful before - choosing this solution. It is powerful but it is very dangerous. You can lose all your data very easily. So, - don't choose this solution unless you know what you are doing."), - -partition_with_diskdrake => - __("At this point, you need to choose what -partition(s) to use to install your new Linux-Mandrake system. If partitions -have been already defined (from a previous installation of GNU/Linux or from -another partitioning tool), you can use existing partitions. In other cases, -hard drive partitions must be defined. - - -To create partitions, you must first select a hard drive. You can select the -disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb\" for -the second or \"sda\" for the first SCSI drive and so on. - - -To partition the selected hard drive, you can use these options: - - * Clear all: this option deletes all partitions available on the selected hard drive. - - - * Auto allocate: this option allows you to automatically create Ext2 and swap partitions in free space of your - hard drive. - - - * Rescue partition table: if your partition table is damaged, you can try to recover it using this option. Please - be careful and remember that it can fail. - - - * Undo: you can use this option to cancel your changes. - - - * Reload: you can use this option if you wish to undo all changes and load your initial partitions table - - - * Wizard: If you wish to use a wizard to partition your hard drive, you can use this option. It is recommended if - you do not have a good knowledge in partitioning. - - - * Restore from floppy: if you have saved your partition table on a floppy during a previous installation, you can - recover it using this option. - - - * Save on floppy: if you wish to save your partition table on a floppy to be able to recover it, you can use this - option. It is strongly recommended to use this option - - - * Done: when you have finished partitioning your hard drive, use this option to save your changes. - - -For information, you can reach any option using the keyboard: navigate trough the partitions using Tab and Up/Down arrows. - - -When a partition is selected, you can use: - - * Ctrl-c to create a new partition (when a empty partition is selected) - - * Ctrl-d to delete a partition - - * Ctrl-m to set the mount point - - - -If you are installing on a PPC Machine, you will want to create a small HFS 'bootstrap' partition of at least 1MB for use -by the yaboot bootloader. If you opt to make the partition a bit larger, say 50MB, you may find it a useful place to store -a spare kernel and ramdisk image for emergency boot situations."), - -ask_mntpoint_s => - __("Above are listed the existing Linux partitions detected on -your hard drive. You can keep choices make by the wizard, they are good for a -common usage. If you change these choices, you must at least define a root -partition (\"/\"). Don't choose a too little partition or you will not be able -to install enough software. If you want store your data on a separate partition, -you need also to choose a \"/home\" (only possible if you have more than one -Linux partition available). - - -For information, each partition is listed as follows: \"Name\", \"Capacity\". - - -\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\", -\"partition number\" (for example, \"hda1\"). - - -\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and \"sd\" -if it is an SCSI hard drive. - - -\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE hard drives: - - * \"a\" means \"master hard drive on the primary IDE controller\", - - * \"b\" means \"slave hard drive on the primary IDE controller\", - - * \"c\" means \"master hard drive on the secondary IDE controller\", - - * \"d\" means \"slave hard drive on the secondary IDE controller\". - - -With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means \"secondary hard drive\", etc..."), - -takeOverHdChoose => - __("Choose the hard drive you want to erase to install your -new Linux-Mandrake partition. Be careful, all data present on it will be lost -and will not be recoverable."), - -takeOverHdConfirm => - __("Click on \"OK\" if you want to delete all data and -partitions present on this hard drive. Be careful, after clicking on \"OK\", you -will not be able to recover any data and partitions present on this hard drive, -including any Windows data. - - -Click on \"Cancel\" to cancel this operation without losing any data and -partitions present on this hard drive."), - -resizeFATChoose => - __("More than one Microsoft Windows partition have been -detected on your hard drive. Please choose the one you want resize to install -your new Linux-Mandrake operating system. - - -For information, each partition is listed as follow; \"Linux name\", \"Windows -name\" \"Capacity\". - -\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number\", -\"partition number\" (for example, \"hda1\"). - - -\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd\" -if it is an SCSI hard drive. - - -\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With IDE hard drives: - - * \"a\" means \"master hard drive on the primary IDE controller\", - - * \"b\" means \"slave hard drive on the primary IDE controller\", - - * \"c\" means \"master hard drive on the secondary IDE controller\", - - * \"d\" means \"slave hard drive on the secondary IDE controller\". - -With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means \"secondary hard drive\", etc. - - -\"Windows name\" is the letter of your hard drive under Windows (the first disk -or partition is called \"C:\")."), - -resizeFATWait => - __("Please be patient. This operation can take several minutes."), - -formatPartitions => - __("Any partitions that have been newly defined must be -formatted for use (formatting meaning creating a filesystem). - - -At this time, you may wish to reformat some already existing partitions to erase -the data they contain. If you wish do that, please also select the partitions -you want to format. - - -Please note that it is not necessary to reformat all pre-existing partitions. -You must reformat the partitions containing the operating system (such as \"/\", -\"/usr\" or \"/var\") but do you no have to reformat partitions containing data -that you wish to keep (typically /home). - - -Please be careful selecting partitions, after formatting, all data will be -deleted and you will not be able to recover any of them. - - -Click on \"OK\" when you are ready to format partitions. - - -Click on \"Cancel\" if you want to choose other partitions to install your new -Linux-Mandrake operating system."), - -choosePackages => - __("You may now select the group of packages you wish to -install or upgrade. - - -DrakX will then check whether you have enough room to install them all. If not, -it will warn you about it. If you want to go on anyway, it will proceed onto the -installation of all selected groups but will drop some packages of lesser -interest. At the bottom of the list you can select the option -\"Individual package selection\"; in this case you will have to browse through -more than 1000 packages..."), - -choosePackagesTree => - __("You can now choose individually all the packages you -wish to install. - - -You can expand or collapse the tree by clicking on options in the left corner of -the packages window. - - -If you prefer to see packages sorted in alphabetic order, click on the icon -\"Toggle flat and group sorted\". - - -If you want not to be warned on dependencies, click on \"Automatic -dependencies\". If you do this, note that unselecting one package may silently -unselect several other packages which depend on it."), - -chooseCD => - __("If you have all the CDs in the list above, click Ok. If you have -none of those CDs, click Cancel. If only some CDs are missing, unselect them, -then click Ok."), - -installPackages => - __("Your new Linux-Mandrake operating system is currently being -installed. This operation should take a few minutes (it depends on size you -choose to install and the speed of your computer). - - -Please be patient."), - -selectMouse => - __( "You can now test your mouse. Use buttons and wheel to verify -if settings are good. If not, you can click on \"Cancel\" to choose another -driver."), - -selectSerialPort => - __("Please select the correct port. For example, the COM1 -port under MS Windows is named ttyS0 under GNU/Linux."), - -configureNetwork => - __("If you wish to connect your computer to the Internet or -to a local network please choose the correct option. Please turn on your device -before choosing the correct option to let DrakX detect it automatically. - - -If you do not have any connection to the Internet or a local network, choose -\"Disable networking\". - - -If you wish to configure the network later after installation or if you have -finished to configure your network connection, choose \"Done\"."), - -configureNetworkNoModemFound => - __("No modem has been detected. Please select the serial port on which it is plugged. - - -For information, the first serial port (called \"COM1\" under Microsoft -Windows) is called \"ttyS0\" under Linux."), - -configureNetworkDNS => - __("You may now enter dialup options. If you don't know -or are not sure what to enter, the correct informations can be obtained from -your Internet Service Provider. If you do not enter the DNS (name server) -information here, this information will be obtained from your Internet Service -Provider at connection time."), - -configureNetworkISDN => - __("If your modem is an external modem, please turn on it now to let DrakX detect it automatically."), - -configureNetworkADSL => - __("Please turn on your modem and choose the correct one."), - -configureNetworkADSL2 => - __("If you are not sure if informations above are -correct or if you don't know or are not sure what to enter, the correct -informations can be obtained from your Internet Service Provider. If you do not -enter the DNS (name server) information here, this information will be obtained -from your Internet Service Provider at connection time."), - -configureNetworkCable => - __("You may now enter your host name if needed. If you -don't know or are not sure what to enter, the correct informations can be -obtained from your Internet Service Provider."), - -configureNetworkIP => - __("You may now configure your network device. - - * IP address: if you don't know or are not sure what to enter, ask your network administrator. - You should not enter an IP address if you select the option \"Automatic IP\" below. - - * Netmask: \"255.255.255.0\" is generally a good choice. If you don't know or are not sure what to enter, - ask your network administrator. - - * Automatic IP: if your network uses BOOTP or DHCP protocol, select this option. If selected, no value is needed in - \"IP address\". If you don't know or are not sure if you need to select this option, ask your network administrator."), - -configureNetworkHost => - __("You may now enter your host name if needed. If you -don't know or are not sure what to enter, ask your network administrator."), - -configureNetworkHostDHCP => - __("You may now enter your host name if needed. If you -don't know or are not sure what to enter, leave blank."), - -configureNetworkISP => - __("You may now enter dialup options. If you're not sure what to enter, the -correct information can be obtained from your ISP."), - -configureNetworkProxy => - __("If you will use proxies, please configure them now. If you don't know if -you should use proxies, ask your network administrator or your ISP."), - -installCrypto => - __("You can install cryptographic package if your internet connection has been -set up correctly. First choose a mirror where you wish to download packages and -after that select the packages to install. - - -Note you have to select mirror and cryptographic packages according -to your legislation."), - -configureTimezone => - __("You can now select your timezone according to where you live."), - -configureTimezoneGMT => - __("GNU/Linux manages time in GMT (Greenwich Manage -Time) and translates it in local time according to the time zone you have -selected. - - -If you use Microsoft Windows on this computer, choose \"No\"."), - -configureServices => - __("You may now choose which services you want to start at boot time. - - -When your mouse comes over an item, a small balloon help will popup which -describes the role of the service. - - -Be very careful in this step if you intend to use your machine as a server: you -will probably want not to start any services that you don't need. Please -remember that several services can be dangerous if they are enable on a server. -In general, select only the services that you really need."), - -configurePrinter => - __("You can configure a local printer (connected to your computer) or remote -printer (accessible via a Unix, Netware or Microsoft Windows network)."), - -configurePrinterSystem => - __("If you wish to be able to print, please choose one printing system between -CUPS and LPR. - - -CUPS is a new, powerful and flexible printing system for Unix systems (CUPS -means \"Common Unix Printing System\"). It is the default printing system in -Linux-Mandrake. - - -LPR is the old printing system used in previous Linux-Mandrake distributions. - - -If you don't have printer, click on \"None\"."), - -configurePrinterConnected => - __("GNU/Linux can deal with many types of printer. Each of these types requires -a different setup. - - -If your printer is physically connected to your computer, select \"Local -printer\". - - -If you want to access a printer located on a remote Unix machine, select -\"Remote printer\". - - -If you want to access a printer located on a remote Microsoft Windows machine -(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."), - -configurePrinterLocal => - __("Please turn on your printer before continuing to let DrakX detect it. - -You have to enter some informations here. - - - * Name of printer: the print spooler uses \"lp\" as default printer name. So, you must have a printer named \"lp\". - If you have only one printer, you can use several names for it. You just need to separate them by a pipe - character (a \"|\"). So, if you prefer a more meaningful name, you have to put it first, eg: \"My printer|lp\". - The printer having \"lp\" in its name(s) will be the default printer. - - - * Description: this is optional but can be useful if several printers are connected to your computer or if you allow - other computers to access to this printer. - - - * Location: if you want to put some information on your - printer location, put it here (you are free to write what - you want, for example \"2nd floor\"). -"), - -configurePrinterLPR => -__("You need to enter some informations here. - - - * Name of queue: the print spooler uses \"lp\" as default printer name. So, you need have a printer named \"lp\". - If you have only one printer, you can use several names for it. You just need to separate them by a pipe - character (a \"|\"). So, if you prefer to have a more meaningful name, you have to put it first, eg: \"My printer|lp\". - The printer having \"lp\" in its name(s) will be the default printer. - - - * Spool directory: it is in this directory that printing jobs are stored. Keep the default choice - if you don't know what to use - - - * Printer Connection: If your printer is physically connected to your computer, select \"Local printer\". - If you want to access a printer located on a remote Unix machine, select \"Remote lpd printer\". - - - If you want to access a printer located on a remote Microsoft Windows machine (or on Unix machine using SMB - protocol), select \"SMB/Windows 95/98/NT\". - - - If you want to acces a printer located on NetWare network, select \"NetWare\". -"), - -configurePrinterDev => - __("Your printer has not been detected. Please enter the name of the device on -which it is connected. - - -For information, most printers are connected on the first parallel port. This -one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft Windows."), - -configurePrinterType => - __("You must now select your printer in the above list."), - -configurePrinterOptions => -__("Please select the right options according to your printer. -Please see its documentation if you don't know what choose here. - - -You will be able to test your configuration in next step and you will be able to modify it if it doesn't work as you want."), - -setRootPassword => - __("You can now enter the root password for your Linux-Mandrake system. -The password must be entered twice to verify that both password entries are identical. - - -Root is the system's administrator and is the only user allowed to modify the -system configuration. Therefore, choose this password carefully. -Unauthorized use of the root account can be extemely dangerous to the integrity -of the system, its data and other system connected to it. - - -The password should be a mixture of alphanumeric characters and at least 8 -characters long. It should never be written down. - - -Do not make the password too long or complicated, though: you must be able to -remember it without too much effort."), - -setRootPasswordMd5 => - __("To enable a more secure system, you should select \"Use shadow file\" and -\"Use MD5 passwords\"."), - -setRootPasswordNIS => - __("If your network uses NIS, select \"Use NIS\". If you don't know, ask your -network administrator."), - -addUser => - __("You may now create one or more \"regular\" user account(s), as -opposed to the \"privileged\" user account, root. You can create -one or more account(s) for each person you want to allow to use -the computer. Note that each user account will have its own -preferences (graphical environment, program settings, etc.) -and its own \"home directory\", in which these preferences are -stored. - - -First of all, create an account for yourself! Even if you will be the only user -of the machine, you may NOT connect as root for daily use of the system: it's a -very high security risk. Making the system unusable is very often a typo away. - - -Therefore, you should connect to the system using the user account -you will have created here, and login as root only for administration -and maintenance purposes."), - -createBootdisk => - __("Creating a boot disk is strongly recommended. If you can't -boot your computer, it's the only way to rescue your system without -reinstalling it."), - -setupBootloaderBeginner => - __("You need to indicate where you wish -to place the information required to boot to GNU/Linux. - - -Unless you know exactly what you are doing, choose \"First sector of -drive (MBR)\"."), - -setupBootloader => - __("Unless you know specifically otherwise, the usual choice is \"/dev/hda\" - (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."), - -setupBootloaderAddEntry => - __("LILO (the LInux LOader) and Grub are bootloaders: they are able to boot -either GNU/Linux or any other operating system present on your computer. -Normally, these other operating systems are correctly detected and -installed. If this is not the case, you can add an entry by hand in this -screen. Be careful as to choose the correct parameters. - - -You may also want not to give access to these other operating systems to -anyone, in which case you can delete the corresponding entries. But -in this case, you will need a boot disk in order to boot them!"), - -setupBootloaderGeneral => - __("LILO and grub main options are: - - Boot device: Sets the name of the device (e.g. a hard disk -partition) that contains the boot sector. Unless you know specifically -otherwise, choose \"/dev/hda\". - - - - Delay before booting default image: Specifies the number in tenths -of a second the boot loader should wait before booting the first image. -This is useful on systems that immediately boot from the hard disk after -enabling the keyboard. The boot loader doesn't wait if \"delay\" is -omitted or is set to zero. - - - - Video mode: This specifies the VGA text mode that should be selected -when booting. The following values are available: - - * normal: select normal 80x25 text mode. - - * <number>: use the corresponding text mode. - - - - Clean \"/tmp\" at each boot: if you want delete all files and directories -stored in \"/tmp\" when you boot your system, select this option. - - - - Precise RAM if needed: unfortunately, there is no standard method to ask the -BIOS about the amount of RAM present in your computer. As consequence, Linux may -fail to detect your amount of RAM correctly. If this is the case, you can -specify the correct amount or RAM here. Please note that a difference of 2 or 4 -MB between detected memory and memory present in your system is normal."), - -setupYabootGeneral => - __("Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able -to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer. -Normally, these other operating systems are correctly detected and -installed. If this is not the case, you can add an entry by hand in this -screen. Be careful as to choose the correct parameters. - - -Yaboot main options are: - - - - Init Message: A simple text message that is displayed before the boot -prompt. - - - - Boot Device: Indicate where you want to place the information required to -boot to GNU/Linux. Generally, you will have setup a bootstrap partition earlier -to hold this information. - - - - Open Firmware Delay: Unlike LILO, there are two delays available with -yaboot. The first delay is measured in seconds and at this point you can -choose between CD, OF boot, MacOS, or Linux. - - - - Kernel Boot Timeout: This timeout is similar to the LILO boot delay. After -selecting Linux, you will have this delay in 0.1 seconds before your default -kernel description is selected. - - - - Enable CD Boot?: Checking this option will allow you to choose 'C' for CD at -the first boot prompt. - - - - Enable OF Boot?: Checking this option will allow you to choose 'N' for Open -Firmware at the first boot prompt. - - - - Default OS: You can select which OS will boot by default when the Open Firmware -Delay expires."), - -setupYabootAddEntry => -__("You can add additional entries for yaboot, either for other operating systems, -alternate kernels, or for an emergency boot image. - - -For other OS's - the entry consists only of a label and the root partition. - - -For Linux, there are a few possible options: - - - - Label: This is simply the name will type at the yaboot prompt to select this -boot option. - - - - Image: This would be the name of the kernel to boot. Typically vmlinux or -a variation of vmlinux with an extension. - - - - Root: The root device or '/' for your Linux installation. - - - - - Append: On Apple hardware, the kernel append option is used quite often to -assist in initializing video hardware, or to enable keyboard mouse button emulation -for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse. The following -are some examples: - - - video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune - - video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 - - - - - Initrd: This option can be used either to load initial modules, before the boot -device is available, or to load a ramdisk image for an emergency boot situation. - - - - Initrd-size: The default ramdisk size is generally 4096 bytes. If you should need -to allocate a large ramdisk, this option can be used. - - - - Read-write: Normally the 'root' partition is initially brought up read-only, to allow -a filesystem check before the system becomes 'live'. You can override this option here. - - - - NoVideo: Should the Apple video hardware prove to be exceptionally problematic, you can -select this option to boot in 'novideo' mode, with native framebuffer support. - - - - Default: Selects this entry as being the default Linux selection, selectable by just -pressing ENTER at the yaboot prompt. This entry will also be highlighted with a '*', if you -press TAB to see the boot selections."), - -setupSILOAddEntry => - __("SILO is a bootloader for SPARC: it is able to boot -either GNU/Linux or any other operating system present on your computer. -Normally, these other operating systems are correctly detected and -installed. If this is not the case, you can add an entry by hand in this -screen. Be careful as to choose the correct parameters. - - -You may also want not to give access to these other operating systems to -anyone, in which case you can delete the corresponding entries. But -in this case, you will need a boot disk in order to boot them!"), - -setupSILOGeneral => - __("SILO main options are: - - Bootloader installation: Indicate where you want to place the -information required to boot to GNU/Linux. Unless you know exactly -what you are doing, choose \"First sector of drive (MBR)\". - - - - Delay before booting default image: Specifies the number in tenths -of a second the boot loader should wait before booting the first image. -This is useful on systems that immediately boot from the hard disk after -enabling the keyboard. The boot loader doesn't wait if \"delay\" is -omitted or is set to zero."), - -configureX => - __("Now it's time to configure the X Window System, which is the -core of the GNU/Linux GUI (Graphical User Interface). For this purpose, -you must configure your video card and monitor. Most of these -steps are automated, though, therefore your work may only consist -of verifying what has been done and accept the settings :) - - -When the configuration is over, X will be started (unless you -ask DrakX not to) so that you can check and see if the -settings suit you. If they don't, you can come back and -change them, as many times as necessary."), - -configureXmain => - __("If something is wrong in X configuration, use these options to correctly -configure the X Window System."), - -configureXxdm => - __("If you prefer to use a graphical login, select \"Yes\". Otherwise, select -\"No\"."), - -miscellaneous => - __("You can choose a security level for your system. Please refer to the manual for complete - information. Basically, if you don't know what to choose, keep the default option. -"), - -exitInstall => - __("Your system is going to reboot. - -After rebooting, your new Linux Mandrake system will load automatically. -If you want to boot into another existing operating system, please read -the additional instructions."), -); - -#-#- ################################################################################ -#-#- NO LONGER UP-TO-DATE... -#-%steps_long = ( -#-selectLanguage => -#- __("Choose preferred language for install and system usage."), -#- -#-selectKeyboard => -#- __("Choose the layout corresponding to your keyboard from the list above"), -#- -#-selectPath => -#- __("Choose \"Installation\" if there are no previous versions of GNU/Linux -#-installed, or if you wish to use multiple distributions or versions. -#- -#- -#-Choose \"Update\" if you wish to update a previous version of Mandrake -#-Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."), -#- -#-selectInstallClass => -#- __("Select: -#- -#- - Beginner: If you have never installed GNU/Linux before, and wish to -#-install the distribution elected \"Product of the year\" for 1999, -#-click here. -#- -#- - Developer: If you are familiar with GNU/Linux and will be using the -#-computer primarily for software development, you will find happiness -#-here. -#- -#- - Server: If you wish to install a general purpose server, or the -#-GNU/Linux distribution elected \"Distribution/Server\" for 1999, select -#-this. -#- -#- - Expert: If you are fluent with GNU/Linux and want to perform -#-a highly customized installation, this Install Class is for you."), -#- -#-setupSCSI => -#- __("DrakX will attempt at first to look for one or more PCI -#-SCSI adapter(s). If it finds it (or them) and knows which driver(s) -#-to use, it will insert it (them) automatically. -#- -#-If your SCSI adapter is ISA, or is PCI but DrakX doesn't know -#-which driver to use for this card, or if you have no SCSI adapters -#-at all, you will then be prompted on whether you have one or not. -#-If you have none, answer \"No\". If you have one or more, answer -#-\"Yes\". A list of drivers will then pop up, from which you will -#-have to select one. -#- -#-After you have selected the driver, DrakX will ask if you -#-want to specify options for it. First, try and let the driver -#-probe for the hardware: it usually works fine. -#- -#-If not, do not forget the information on your hardware that you -#-could get from you documentation or from Windows (if you have -#-it on your system), as suggested by the installation guide. -#-These are the options you will need to provide to the driver."), -#- -#-partitionDisks => -#- __("In this stage, you may choose what partition(s) use to install your -#-Linux-Mandrake system."), -#- -#-#At this point, hard drive partitions must be defined. (Unless you -#-#are overwriting a previous install of GNU/Linux and have already defined -#-#your hard drive partitions as desired.) This operation consists of -#-#logically dividing the computer's hard drive capacity into separate -#-#areas for use. -#-# -#-# -#-#Two common partition are: the root partition (/), which is the starting -#-#point of the filesystem's directory hierarchy, and /boot, which contains -#-#all files necessary to start the operating system when the -#-#computer is first turned on. -#-# -#-# -#-#Because the effects of this process are usually irreversible, partitioning -#-#can be intimidating and stressful to the unexperienced. DiskDrake -#-#simplifies the process so that it need not be. Consult the documentation -#-#and take your time before proceeding."), -#- -#-formatPartitions => -#- __("Any partitions that have been newly defined must be formatted for -#-use (formatting meaning creating a filesystem). At this time, you may -#-wish to re-format some already existing partitions to erase the data -#-they contain. Note: it is not necessary to re-format pre-existing -#-partitions, particularly if they contain files or data you wish to keep. -#-Typically retained are /home and /usr/local."), -#- -#-choosePackages => -#- __("You may now select the packages you wish to install. -#- -#- -#-Please note that some packages require the installation of others. -#-These are referred to as package dependencies. The packages you select, -#-and the packages they require will be automatically selected for -#-install. It is impossible to install a package without installing all -#-of its dependencies. -#- -#- -#-Information on each category and specific package is available in the -#-area titled \"Info\", located between list of packages and the five -#-buttons \"Install\", \"Select more/less\" and \"Show more/less\"."), -#- -#-doInstallStep => -#- __("The packages selected are now being installed. -#- -#- -#-This operation should take a few minutes."), -#- -#-selectMouse => -#- __("If DrakX failed to find your mouse, or if you want to -#-check what it has done, you will be presented the list of mice -#-above. -#- -#- -#-If you agree with DrakX' settings, just jump to the section -#-you want by clicking on it in the menu on the left. Otherwise, -#-choose a mouse type in the menu which you think is the closest -#-match for your mouse. -#- -#-In case of a serial mouse, you will also have to tell DrakX -#-which serial port it is connected to."), -#- -#-configureNetwork => -#- __("This section is dedicated to configuring a local area network, -#-or LAN. If you answer \"Yes\" here, DrakX will try to find an -#-Ethernet adapter on your machine. PCI adapters should be found and -#-initialized automatically. However, if your peripheral is ISA, -#-autodetection will not work, and you will have to choose a driver -#-from the list that will appear then. -#- -#- -#-As for SCSI adapters, you can let the driver probe for the adapter -#-in the first time, otherwise you will have to specify the options -#-to the driver that you will have fetched from Windows' control -#-panel. -#- -#- -#-If you install a Linux-Mandrake system on a machine which is part -#-of an already existing network, the network administrator will -#-have given you all necessary information (IP address, network -#-submask or netmask for short, and hostname). If you're setting -#-up a private network at home for example, you should choose -#-addresses "), -#- -#-configureTimezone => -#- __("Help"), -#- -#-configureServices => -#- __("Help"), -#- -#-configurePrinter => -#- __("GNU/Linux can deal with many types of printer. Each of these -#-types require a different setup. -#- -#- -#-If your printer is directly connected to your computer, select -#-\"Local printer\". You will then have to tell which port your -#-printer is connected to, and select the appropriate filter. -#- -#- -#-If you want to access a printer located on a remote Unix machine, -#-you will have to select \"Remote lpd queue\". In order to make -#-it work, no username or password is required, but you will need -#-to know the name of the printing queue on this server. -#- -#- -#-If you want to access a SMB printer (which means, a printer located -#-on a remote Windows 9x/NT machine), you will have to specify its -#-SMB name (which is not its TCP/IP name), and possibly its IP address, -#-plus the username, workgroup and password required in order to -#-access the printer, and of course the name of the printer.The same goes -#-for a NetWare printer, except that you need no workgroup information."), -#- -#-setRootPassword => -#- __("You must now enter the root password for your Linux-Mandrake -#-system. The password must be entered twice to verify that both -#-password entries are identical. -#- -#- -#-Root is the administrator of the system, and is the only user -#-allowed to modify the system configuration. Therefore, choose -#-this password carefully! Unauthorized use of the root account can -#-be extremely dangerous to the integrity of the system and its data, -#-and other systems connected to it. The password should be a -#-mixture of alphanumeric characters and a least 8 characters long. It -#-should *never* be written down. Do not make the password too long or -#-complicated, though: you must be able to remember without too much -#-effort."), -#- -#-addUser => -#- __("You may now create one or more \"regular\" user account(s), as -#-opposed to the \"privileged\" user account, root. You can create -#-one or more account(s) for each person you want to allow to use -#-the computer. Note that each user account will have its own -#-preferences (graphical environment, program settings, etc.) -#-and its own \"home directory\", in which these preferences are -#-stored. -#- -#- -#-First of all, create an account for yourself! Even if you will be the only user -#-of the machine, you may NOT connect as root for daily use of the system: it's a -#-very high security risk. Making the system unusable is very often a typo away. -#- -#- -#-Therefore, you should connect to the system using the user account -#-you will have created here, and login as root only for administration -#-and maintenance purposes."), -#- -#-createBootdisk => -#- __("Please, please, answer \"Yes\" here! Just for example, when you -#-reinstall Windows, it will overwrite the boot sector. Unless you have -#-made the bootdisk as suggested, you won't be able to boot into GNU/Linux -#-any more!"), -#- -#-setupBootloader => -#- __("You need to indicate where you wish -#-to place the information required to boot to GNU/Linux. -#- -#- -#-Unless you know exactly what you are doing, choose \"First sector of -#-drive (MBR)\"."), -#- -#-configureX => -#- __("Now it's time to configure the X Window System, which is the -#-core of the GNU/Linux GUI (Graphical User Interface). For this purpose, -#-you must configure your video card and monitor. Most of these -#-steps are automated, though, therefore your work may only consist -#-of verifying what has been done and accept the settings :) -#- -#- -#-When the configuration is over, X will be started (unless you -#-ask DrakX not to) so that you can check and see if the -#-settings suit you. If they don't, you can come back and -#-change them, as many times as necessary."), -#- -#-exitInstall => -#- __("Help"), -#-); |