summaryrefslogtreecommitdiffstats
path: root/perl-install/diskdrake/interactive.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/diskdrake/interactive.pm')
-rw-r--r--perl-install/diskdrake/interactive.pm70
1 files changed, 35 insertions, 35 deletions
diff --git a/perl-install/diskdrake/interactive.pm b/perl-install/diskdrake/interactive.pm
index 8a029c26b..a5e4a6f7d 100644
--- a/perl-install/diskdrake/interactive.pm
+++ b/perl-install/diskdrake/interactive.pm
@@ -25,7 +25,7 @@ struct part {
int active # one of { 0 | 0x80 } x86 only, primary only
int start # in sectors
int size # in sectors
- int type # 0x82, 0x83, 0x6 ...
+ int pt_type # 0x82, 0x83, 0x6 ...
string device # 'hda5', 'sdc1' ...
string devfs_device # 'ide/host0/bus0/target0/lun0/part5', ...
string prefer_devfs_name # should the {devfs_device} or the {device} be used in fstab
@@ -144,7 +144,7 @@ struct hd_lvm inherits hd {
}
struct raw_hd inherits hd {
- string type # 0x82, 0x83, 'nfs', ...
+ string pt_type # 0x82, 0x83, 'nfs', ...
string mntpoint # '/', '/usr' ...
string options # 'defaults', 'noauto'
@@ -411,7 +411,7 @@ sub part_possible_actions {
my %actions = my @l = (
N_("Mount point") => '($part->{real_mntpoint} && common::usingRamdisk()) || (!isBusy && !isSwap && !isNonMountable)',
- N_("Type") => '!isBusy && $::expert && (!readonly || ($part->{type} & 0xff) == 0x83)',
+ N_("Type") => '!isBusy && $::expert && (!readonly || ($part->{pt_type} & 0xff) == 0x83)',
N_("Options") => '$::expert',
N_("Resize") => '!isBusy && !readonly && !isSpecial || isLVM($hd) && isMounted && isThisFs("xfs", $part)',
N_("Move") => '!isBusy && !readonly && !isSpecial && $::expert && 0', # disable for the moment
@@ -432,7 +432,7 @@ sub part_possible_actions {
hasMntpoint => '$part->{mntpoint}',
isPrimary => 'isPrimary($part, $hd)',
);
- if ($part->{type} eq '0') {
+ if ($part->{pt_type} eq '0') {
if_(!$hd->{readonly}, N_("Create"));
} else {
grep {
@@ -453,14 +453,14 @@ sub Create {
$part->{maxsize} = $part->{size}; $part->{size} = 0;
if (!fsedit::suggest_part($part, $all_hds)) {
$part->{size} = $part->{maxsize};
- $part->{type} ||= 0x483;
+ $part->{pt_type} ||= 0x483;
}
#- update adjustment for start and size, take into account the minimum partition size
#- including one less sector for start due to a capacity to increase the adjustement by
#- one.
my ($primaryOrExtended, $migrate_files);
- my $type = type2name($part->{type});
+ my $type_name = pt_type2name($part->{pt_type});
my $mb_size = $part->{size} >> 11;
my $has_startsector = ($::expert || arch() !~ /i.86/) && !isLVM($hd);
@@ -470,9 +470,9 @@ sub Create {
{ label => N("Start sector: "), val => \$part->{start}, min => $def_start, max => ($max - min_partition_size($hd)), type => 'range' },
),
{ label => N("Size in MB: "), val => \$mb_size, min => min_partition_size($hd) >> 11, max => $def_size >> 11, type => 'range' },
- { label => N("Filesystem type: "), val => \$type, list => [ partition_table::important_types() ], sort => 0 },
+ { label => N("Filesystem type: "), val => \$type_name, list => [ partition_table::important_types() ], sort => 0 },
{ label => N("Mount point: "), val => \$part->{mntpoint}, list => [ fsedit::suggestions_mntpoint($all_hds), '' ],
- disabled => sub { my $p = { type => name2type($type) }; isSwap($p) || isNonMountable($p) }, type => 'combo', not_edit => 0,
+ disabled => sub { my $p = { pt_type => name2pt_type($type_name) }; isSwap($p) || isNonMountable($p) }, type => 'combo', not_edit => 0,
},
if_($::expert && $hd->hasExtended,
{ label => N("Preference: "), val => \$primaryOrExtended, list => [ '', "Extended", "Primary", if_($::expert, "Extended_0x85") ] },
@@ -492,7 +492,7 @@ sub Create {
}
}, complete => sub {
$part->{size} = from_Mb($mb_size, min_partition_size($hd), $max - $part->{start}); #- need this to be able to get back the approximation of using MB
- $part->{type} = name2type($type);
+ $part->{pt_type} = name2pt_type($type_name);
$part->{mntpoint} = '' if isNonMountable($part);
$part->{mntpoint} = 'swap' if isSwap($part);
fs::set_default_options($part);
@@ -564,21 +564,21 @@ sub Type {
my @types = partition_table::important_types();
#- when readonly, Type() is allowed only when changing between various { 0x83, 0x183, ... }
- @types = grep { (name2type($_) & 0xff) == 0x83 } @types if $hd->{readonly};
+ @types = grep { (name2pt_type($_) & 0xff) == 0x83 } @types if $hd->{readonly};
- my $type_name = type2name($part->{type});
+ my $type_name = pt_type2name($part->{pt_type});
$in->ask_from_({ title => N("Change partition type"),
messages => N("Which filesystem do you want?"),
focus_first => 1,
},
[ { label => N("Type"), val => \$type_name, list => \@types, sort => 0, not_edit => !$::expert } ]) or return;
- my $type = $type_name && name2type($type_name);
+ my $pt_type = $type_name && name2pt_type($type_name);
- if (isExt2($part) && isThisFs('ext3', { type => $type })) {
+ if (isExt2($part) && isThisFs('ext3', { pt_type => $pt_type })) {
my $_w = $in->wait_message('', N("Switching from ext2 to ext3"));
if (run_program::run("tune2fs", "-j", devices::make($part->{device}))) {
- $part->{type} = $type;
+ $part->{pt_type} = $pt_type;
$part->{isFormatted} = 1; #- assume that if tune2fs works, partition is formatted
#- disable the fsck (don't do it together with -j in case -j fails?)
@@ -589,8 +589,8 @@ sub Type {
#- either we switch to non-ext3 or switching losslessly to ext3 failed
!isExt2($part) or $warn->() or return;
- if (defined $type) {
- check_type($in, $type, $hd, $part) and fsedit::change_type($type, $hd, $part);
+ if (defined $pt_type) {
+ check_pt_type($in, $pt_type, $hd, $part) and fsedit::change_pt_type($pt_type, $hd, $part);
}
}
@@ -870,16 +870,16 @@ sub Loopback {
my $part = { maxsize => $max, size => 0, loopback_device => $real_part, notFormatted => 1 };
if (!fsedit::suggest_part($part, $all_hds)) {
$part->{size} = $part->{maxsize};
- $part->{type} ||= 0x483;
+ $part->{pt_type} ||= 0x483;
}
delete $part->{mntpoint}; # we don't want the suggested mntpoint
- my $type = type2name($part->{type});
+ my $type_name = pt_type2name($part->{pt_type});
my $mb_size = $part->{size} >> 11;
$in->ask_from(N("Loopback"), '', [
{ label => N("Loopback file name: "), val => \$part->{loopback_file} },
{ label => N("Size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
- { label => N("Filesystem type: "), val => \$type, list => [ partition_table::important_types() ], not_edit => !$::expert, sort => 0 },
+ { label => N("Filesystem type: "), val => \$type_name, list => [ partition_table::important_types() ], not_edit => !$::expert, sort => 0 },
],
complete => sub {
$part->{loopback_file} or $in->ask_warn('', N("Give a file name")), return 1, 0;
@@ -894,7 +894,7 @@ sub Loopback {
}
0;
}) or return;
- $part->{type} = name2type($type);
+ $part->{pt_type} = name2pt_type($type_name);
push @{$real_part->{loopback}}, $part;
fsedit::recompute_loopbacks($all_hds);
}
@@ -1018,16 +1018,16 @@ sub partitions_suggestions {
$fsedit::suggestions{$t};
}
-sub check_type {
- my ($in, $type, $hd, $part) = @_;
- eval { fsedit::check_type($type, $hd, $part) };
+sub check_pt_type {
+ my ($in, $pt_type, $hd, $part) = @_;
+ eval { fsedit::check_pt_type($pt_type, $hd, $part) };
if (my $err = $@) {
$in->ask_warn('', formatError($err));
return;
}
if ($::isStandalone) {
- if (my $pkg = fsedit::package_needed_for_partition_type({ type => $type })) {
- my $fs = type2fs({ type => $type });
+ if (my $pkg = fsedit::package_needed_for_partition_type({ pt_type => $pt_type })) {
+ my $fs = type2fs({ pt_type => $pt_type });
if (!-x "/sbin/mkfs.$fs") {
$in->ask_yesorno('', N("The package %s is needed. Install it?", $pkg), 1) or return;
$in->do_pkgs->install($pkg);
@@ -1052,7 +1052,7 @@ sub check_mntpoint {
}
sub check {
my ($in, $hd, $part, $all_hds) = @_;
- check_type($in, $part->{type}, $hd, $part) &&
+ check_pt_type($in, $part->{pt_type}, $hd, $part) &&
check_mntpoint($in, $part->{mntpoint}, $hd, $part, $all_hds);
}
@@ -1159,15 +1159,15 @@ sub format_part_info {
if (arch() eq "ppc") {
my $new_value = $part->{pType};
$new_value =~ s/[^A-Za-z0-9_]//g;
- $info .= N("Type: ") . $new_value . ($::expert ? sprintf " (0x%x)", $part->{type} : '') . "\n";
+ $info .= N("Type: ") . $new_value . ($::expert ? sprintf " (0x%x)", $part->{pt_type} : '') . "\n";
if (defined $part->{pName}) {
$new_value = $part->{pName};
$new_value =~ s/[^A-Za-z0-9_]//g;
$info .= N("Name: ") . $new_value . "\n";
}
- } elsif ($part->{type}) {
- my $type = substr(type2name($part->{type}), 0, 40); # limit the length
- $info .= N("Type: ") . $type . ($::expert ? sprintf " (0x%x)", $part->{type} : '') . "\n";
+ } elsif ($part->{pt_type}) {
+ my $type_name = substr(pt_type2name($part->{pt_type}), 0, 40); # limit the length
+ $info .= N("Type: ") . $type_name . ($::expert ? sprintf " (0x%x)", $part->{pt_type} : '') . "\n";
} else {
$info .= N("Empty") . "\n";
}
@@ -1176,7 +1176,7 @@ sub format_part_info {
$info .= sprintf " (%s%%)", int 100 * $part->{size} / $hd->{totalsectors} if $hd->{totalsectors};
$info .= N(", %s sectors", $part->{size}) if $::expert;
$info .= "\n";
- $info .= N("Cylinder %d to %d\n", $part->{start} / $hd->cylinder_size, ($part->{start} + $part->{size} - 1) / $hd->cylinder_size) if ($::expert || !$part->{type}) && !isSpecial($part) && !isLVM($hd);
+ $info .= N("Cylinder %d to %d\n", $part->{start} / $hd->cylinder_size, ($part->{start} + $part->{size} - 1) / $hd->cylinder_size) if ($::expert || !$part->{pt_type}) && !isSpecial($part) && !isLVM($hd);
$info .= N("Number of logical extents: %d", $part->{size} / $hd->cylinder_size) if $::expert && isLVM($hd);
$info .= N("Formatted\n") if $part->{isFormatted};
$info .= N("Not formatted\n") if !$part->{isFormatted} && $part->{notFormatted};
@@ -1205,7 +1205,7 @@ sub format_part_info {
sub format_part_info_short {
my ($hd, $part) = @_;
- $part->{type} ?
+ $part->{pt_type} ?
partition_table::description($part) :
format_part_info($hd, $part);
}
@@ -1231,9 +1231,9 @@ sub format_raw_hd_info {
my $info = '';
$info .= N("Mount point: ") . "$raw_hd->{mntpoint}\n" if $raw_hd->{mntpoint};
$info .= format_hd_info($raw_hd);
- if ($raw_hd->{type}) {
- my $type = substr(type2name($raw_hd->{type}), 0, 40); # limit the length
- $info .= N("Type: ") . $type . "\n";
+ if ($raw_hd->{pt_type}) {
+ my $type_name = substr(pt_type2name($raw_hd->{pt_type}), 0, 40); # limit the length
+ $info .= N("Type: ") . $type_name . "\n";
}
if (my $s = $raw_hd->{options}) {
$s =~ s/password=([^\s,]*)/'password=' . ('x' x length($1))/e;
generated by cgit v1.2.1 (git 2.21.0) at 2024-06-30 17:39:03 +0000