summaryrefslogtreecommitdiffstats
path: root/perl-install/detect_devices.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/detect_devices.pm')
-rw-r--r--perl-install/detect_devices.pm1167
1 files changed, 1167 insertions, 0 deletions
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
new file mode 100644
index 000000000..38e96967b
--- /dev/null
+++ b/perl-install/detect_devices.pm
@@ -0,0 +1,1167 @@
+package detect_devices; # $Id: detect_devices.pm 149913 2007-03-29 16:23:50Z blino $
+
+use diagnostics;
+use strict;
+use vars qw($pcitable_addons $usbtable_addons);
+
+#-######################################################################################
+#- misc imports
+#-######################################################################################
+use log;
+use common;
+use devices;
+use run_program;
+use modules;
+use c;
+
+#-#####################################################################################
+#- Globals
+#-#####################################################################################
+my %serialprobe;
+
+#-######################################################################################
+#- Functions
+#-######################################################################################
+
+sub get() {
+ #- Detect the default BIOS boot harddrive is kind of tricky. We may have IDE,
+ #- SCSI and RAID devices on the same machine. From what I see so far, the default
+ #- BIOS boot harddrive will be
+ #- 1. The first IDE device if IDE exists. Or
+ #- 2. The first SCSI device if SCSI exists. Or
+ #- 3. The first RAID device if RAID exists.
+
+ getIDE(), getSCSI(), getDAC960(), getCompaqSmartArray(), getATARAID();
+}
+sub hds() { grep { may_be_a_hd($_) } get() }
+sub tapes() { grep { $_->{media_type} eq 'tape' } get() }
+sub cdroms() { grep { $_->{media_type} eq 'cdrom' } get() }
+sub burners() { grep { isBurner($_) } cdroms() }
+sub dvdroms() { grep { isDvdDrive($_) } cdroms() }
+sub raw_zips() { grep { member($_->{media_type}, 'fd', 'hd') && isZipDrive($_) } get() }
+sub ls120s() { grep { member($_->{media_type}, 'fd', 'hd') && isLS120Drive($_) } get() }
+sub zips() {
+ map {
+ $_->{device} .= 4;
+ $_;
+ } raw_zips();
+}
+
+sub floppies {
+ my ($o_not_detect_legacy_floppies) = @_;
+ require modules;
+ my @fds;
+ if (!$o_not_detect_legacy_floppies) {
+ eval { modules::load("floppy") if $::isInstall };
+ if (!is_xbox()) {
+ @fds = map {
+ my $info = c::floppy_info(devices::make("fd$_"));
+ if_($info && $info ne '(null)', { device => "fd$_", media_type => 'fd', info => $info });
+ } qw(0 1);
+ }
+ }
+
+ my @ide = ls120s() and eval { modules::load("ide-floppy") };
+
+ eval { modules::load("usb-storage") } if $::isInstall && usbStorage();
+ my @scsi = grep { $_->{media_type} eq 'fd' } getSCSI();
+ @ide, @scsi, @fds;
+}
+sub floppies_dev() { map { $_->{device} } floppies() }
+sub floppy() { first(floppies_dev()) }
+#- example ls120, model = "LS-120 SLIM 02 UHD Floppy"
+
+sub removables() {
+ floppies(), cdroms(), zips();
+}
+
+sub get_sys_cdrom_info {
+ my (@drives) = @_;
+
+ my @drives_order;
+ foreach (cat_("/proc/sys/dev/cdrom/info")) {
+ my ($t, $l) = split ':';
+ my @l;
+ @l = split(' ', $l) if $l;
+ if ($t eq 'drive name') {
+ @drives_order = map {
+ my $dev = $_;
+ find { $_->{device} eq $dev } @drives;
+ } @l;
+ } else {
+ my $capacity;
+ if ($t eq 'Can write CD-R') {
+ $capacity = 'burner';
+ } elsif ($t eq 'Can read DVD') {
+ $capacity = 'DVD';
+ }
+ if ($capacity) {
+ each_index {
+ ($drives_order[$::i] || {})->{capacity} .= "$capacity " if $_;
+ } @l;
+ }
+ }
+ }
+}
+
+sub complete_usb_storage_info {
+ my (@l) = @_;
+
+ my @usb = grep { exists $_->{usb_vendor} } @l;
+
+ foreach my $usb (usb_probe()) {
+ if (my $e = find { !$_->{found} && $_->{usb_vendor} == $usb->{vendor} && $_->{usb_id} == $usb->{id} } @usb) {
+ my $host = get_sysfs_usbpath_for_block($e->{device});
+ if ($host) {
+ $e->{info} = chomp_(cat_("/sys/block/$e->{device}/$host/../serial"));
+ $e->{usb_description} = join('|',
+ chomp_(cat_("/sys/block/$e->{device}/$host/../manufacturer")),
+ chomp_(cat_("/sys/block/$e->{device}/$host/../product")));
+ }
+ local $e->{found} = 1;
+ $e->{"usb_$_"} ||= $usb->{$_} foreach keys %$usb;
+ }
+ }
+}
+
+sub isBurner {
+ my ($e) = @_;
+ $e->{capacity} =~ /burner/ and return 1;
+
+ #- do not work for SCSI
+ my $f = tryOpen($e->{device}); #- SCSI burner are not detected this way.
+ $f && c::isBurner(fileno($f));
+}
+sub isDvdDrive {
+ my ($e) = @_;
+ $e->{capacity} =~ /DVD/ || $e->{info} =~ /DVD/ and return 1;
+
+ #- do not work for SCSI
+ my $f = tryOpen($e->{device});
+ $f && c::isDvdDrive(fileno($f));
+}
+sub isZipDrive { $_[0]{info} =~ /ZIP\s+\d+/ } #- accept ZIP 100, untested for bigger ZIP drive.
+sub isLS120Drive { $_[0]{info} =~ /LS-?120|144MB/ }
+sub isKeyUsb { begins_with($_[0]{usb_media_type} || '', 'Mass Storage') && $_[0]{media_type} eq 'hd' }
+sub isFloppyUsb { $_[0]{usb_driver} && $_[0]{usb_driver} eq 'Removable:floppy' }
+sub may_be_a_hd {
+ my ($e) = @_;
+ $e->{media_type} eq 'hd' && !(
+ isZipDrive($e)
+ || isLS120Drive($e)
+ || begins_with($e->{usb_media_type} || '', 'Mass Storage|Floppy (UFI)')
+ );
+}
+
+sub get_sysfs_field_from_link {
+ my ($device, $field) = @_;
+ my $l = readlink("$device/$field");
+ $l =~ s!.*/!!;
+ $l;
+}
+
+sub get_sysfs_usbpath_for_block {
+ my ($device) = @_;
+ my $host = readlink("/sys/block/$device/device");
+ $host =~ s!/host.*!!;
+ $host;
+}
+
+sub get_scsi_driver {
+ my (@l) = @_;
+ # find driver of host controller from sysfs:
+ foreach (@l) {
+ next if $_->{driver};
+ my $host = get_sysfs_usbpath_for_block($_->{device});
+ $_->{driver} = get_sysfs_field_from_link("/sys/block/$_->{device}/$host", 'driver');
+ }
+}
+
+sub getSCSI() {
+ my $dev_dir = '/sys/bus/scsi/devices';
+
+ my @scsi_types = (
+ "Direct-Access",
+ "Sequential-Access",
+ "Printer",
+ "Processor",
+ "WORM",
+ "CD-ROM",
+ "Scanner",
+ "Optical Device",
+ "Medium Changer",
+ "Communications",
+ );
+
+ my @l;
+ foreach (all($dev_dir)) {
+ my ($host, $channel, $id, $lun) = split ':' or log::l("bad entry in $dev_dir: $_"), next;
+ my $dir = "$dev_dir/$_";
+
+ # handle both old and new kernels:
+ my $node = -e "$dir/block" ? "$dir/block" : top(glob_("$dir/block*"));
+ my ($device) = readlink($node) =~ m!/block/(.*)!;
+ warn("cannot get info for device ($_)"), next if !$device;
+
+ my $usb_dir = readlink("$node/device") =~ m!/usb! && "$node/device/../../../..";
+ my $get_usb = sub { chomp_(cat_("$usb_dir/$_[0]")) };
+
+ my $get = sub {
+ my $s = cat_("$dir/$_[0]");
+ $s =~ s/\s+$//;
+ $s;
+ };
+
+ # Old hp scanners report themselves as "Processor"s
+ # (see linux/include/scsi/scsi.h and sans-find-scanner.1)
+ my $raw_type = $scsi_types[$get->('type')];
+
+ my $media_type = ${{ st => 'tape', sr => 'cdrom', sd => 'hd' }}{substr($device, 0, 2)} ||
+ $raw_type =~ /Scanner|Processor/ && 'scanner';
+
+ push @l, { info => $get->('vendor') . ' ' . $get->('model'), host => $host, channel => $channel, id => $id, lun => $lun,
+ bus => 'SCSI', media_type => $media_type, device => $device,
+ $usb_dir ? (
+ usb_vendor => hex($get_usb->('idVendor')), usb_id => hex($get_usb->('idProduct')),
+ ) : (),
+ };
+ }
+
+ @l = sort { $a->{host} <=> $b->{host} || $a->{channel} <=> $b->{channel} || $a->{id} <=> $b->{id} || $a->{lun} <=> $b->{lun} } @l;
+
+ complete_usb_storage_info(@l);
+
+ foreach (@l) {
+ $_->{media_type} = 'fd' if $_->{media_type} eq 'hd' && isFloppyUsb($_);
+ }
+
+ get_sys_cdrom_info(@l);
+ get_scsi_driver(@l);
+ @l;
+}
+
+
+my %eide_hds = (
+ "ASUS" => "Asus",
+ "CD-ROM CDU" => "Sony",
+ "CD-ROM Drive/F5D" => "ASUSTeK",
+ "Compaq" => "Compaq",
+ "CONNER" => "Conner Peripherals",
+ "IBM" => "IBM",
+ "FUJITSU" => "Fujitsu",
+ "HITACHI" => "Hitachi",
+ "Lite-On" => "Lite-On Technology Corp.",
+ "LITE-ON" => "Lite-On Technology Corp.",
+ "LTN" => "Lite-On Technology Corp.",
+ "IOMEGA" => "Iomega",
+ "MAXTOR" => "Maxtor",
+ "Maxtor" => "Maxtor",
+ "Micropolis" => "Micropolis",
+ "Pioneer" => "Pioneer",
+ "PLEXTOR" => "Plextor",
+ "QUANTUM" => "Quantum",
+ "SAMSUNG" => "Samsung",
+ "Seagate " => "Seagate Technology",
+ "ST3" => "Seagate Technology",
+ "TEAC" => "Teac",
+ "TOSHIBA" => "Toshiba",
+ "WDC" => "Western Digital Corp.",
+);
+
+
+sub getIDE() {
+ my @idi;
+
+ #- what about a system with absolutely no IDE on it, like some sparc machine.
+ -e "/proc/ide" or return ();
+
+ #- Great. 2.2 kernel, things are much easier and less error prone.
+ foreach my $d (sort @{[glob_('/proc/ide/hd*')]}) {
+ cat_("$d/driver") =~ /ide-scsi/ and next; #- already appears in /proc/scsi/scsi
+ my $t = chomp_(cat_("$d/media"));
+ my $type = ${{ disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd' }}{$t} or next;
+ my $info = chomp_(cat_("$d/model")) || "(none)";
+
+ my $num = ord(($d =~ /(.)$/)[0]) - ord 'a';
+ my ($vendor, $model) = map {
+ if_($info =~ /^$_(-|\s)*(.*)/, $eide_hds{$_}, $2);
+ } keys %eide_hds;
+
+ my $host = $num;
+ ($host, my $id) = divide($host, 2);
+ ($host, my $channel) = divide($host, 2);
+
+ push @idi, { media_type => $type, device => basename($d),
+ info => $info, host => $host, channel => $channel, id => $id, bus => 'ide',
+ if_($vendor, Vendor => $vendor), if_($model, Model => $model) };
+ }
+ get_sys_cdrom_info(@idi);
+ @idi;
+}
+
+sub block_devices() {
+ -d '/sys/block'
+ ? map { s|!|/|; $_ } all('/sys/block')
+ : map { $_->{dev} } do { require fs::proc_partitions; fs::proc_partitions::read_raw() };
+}
+
+sub getCompaqSmartArray() {
+ my (@idi, $f);
+
+ foreach ('array/ida', 'cpqarray/ida', 'cciss/cciss') {
+ my $prefix = "/proc/driver/$_"; #- kernel 2.4 places it here
+ $prefix = "/proc/$_" if !-e "${prefix}0"; #- kernel 2.2
+
+ my ($name) = m|/(.*)|;
+ for (my $i = 0; -r ($f = "${prefix}$i"); $i++) {
+ my @raw_devices = cat_($f) =~ m|^\s*($name/.*?):|gm;
+
+ #- this is ugly and buggy. keeping it for 2007.0
+ #- on a cciss, cciss/cciss0 didn't contain c0d0, but cciss/cciss1 did contain c0d1
+ #- the line below adds both c0d0 and c0d1 for cciss0, and so some duplicates
+ @raw_devices or @raw_devices = grep { m!^$name/! } block_devices();
+
+ foreach my $raw_device (@raw_devices) {
+ my $device = -d "/dev/$raw_device" ? "$raw_device/disc" : $raw_device;
+ push @idi, { device => $device, prefix => $raw_device . 'p',
+ info => "Compaq RAID logical disk",
+ media_type => 'hd', bus => $name };
+ }
+ }
+ }
+ #- workaround the buggy code above. this should be safe though
+ uniq_ { $_->{device} } @idi;
+}
+
+sub getDAC960() {
+ my %idi;
+
+ #- We are looking for lines of this format:DAC960#0:
+ #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
+ foreach (syslog()) {
+ my ($device, $info) = m|/dev/(rd/.*?): (.*?),| or next;
+ $idi{$device} = { info => $info, media_type => 'hd', device => $device, prefix => $device . 'p', bus => 'dac960' };
+ }
+ values %idi;
+}
+
+sub getATARAID() {
+ my %l;
+ foreach (syslog()) {
+ my ($device) = m|^\s*(ataraid/d\d+):| or next;
+ $l{$device} = { info => 'ATARAID block device', media_type => 'hd', device => $device, prefix => $device . 'p', bus => 'ataraid' };
+ log::l("ATARAID: $device");
+ }
+ values %l;
+}
+
+
+# cpu_name : arch() =~ /^alpha/ ? "cpu " :
+# arch() =~ /^ppc/ ? "processor" : "vendor_id"
+
+# cpu_model : arch() =~ /^alpha/ ? "cpu model" :
+# arch() =~ /^ppc/ ? "cpu " : "model name"
+
+# cpu_freq = arch() =~ /^alpha/ ? "cycle frequency [Hz]" :
+# arch() =~ /^ppc/ ? "clock" : "cpu MHz"
+
+sub getCPUs() {
+ my (@cpus, $cpu);
+ foreach (cat_("/proc/cpuinfo")) {
+ if (/^processor/) { # ix86 specific
+ push @cpus, $cpu if $cpu;
+ $cpu = {};
+ }
+ $cpu->{$1} = $2 if /^([^\t]+).*:\s(.*)$/;
+ $cpu->{processor}++ if $1 eq "processor";
+ }
+ push @cpus, $cpu;
+ @cpus;
+}
+
+sub ix86_cpu_frequency() {
+ cat_('/proc/cpuinfo') =~ /cpu MHz\s*:\s*(\d+)/ && $1;
+}
+
+sub probe_category {
+ my ($category) = @_;
+
+ require list_modules;
+ my @modules = list_modules::category2modules($category);
+
+ if_($category =~ /sound/ && arch() =~ /ppc/ && get_mac_model() !~ /IBM/,
+ { driver => 'snd-powermac', description => 'Macintosh built-in' },
+ ),
+ grep {
+ if ($category eq 'network/isdn') {
+ my $b = $_->{driver} =~ /ISDN:([^,]*),?([^,]*)(?:,firmware=(.*))?/;
+ if ($b) {
+ $_->{driver} = $1;
+ $_->{type} = $2;
+ $_->{type} =~ s/type=//;
+ $_->{firmware} = $3;
+ $_->{driver} eq "hisax" and $_->{options} .= " id=HiSax";
+ }
+ $b;
+ } else {
+ member($_->{driver}, @modules);
+ }
+ } probeall();
+}
+
+sub getSoundDevices() {
+ probe_category('multimedia/sound');
+}
+
+sub isTVcardConfigurable { member($_[0]{driver}, qw(bttv cx88 saa7134)) }
+
+sub getTVcards() { probe_category('multimedia/tv') }
+
+sub getInputDevices() {
+ my (@devices, $device);
+ foreach (cat_('/proc/bus/input/devices')) {
+ if (/^I:/) {
+ $device = {};
+ $device->{vendor} = /Vendor=(\w+)/ && $1;
+ $device->{id} = /Product=(\w+)/ && $1;
+ } elsif (/N: Name="(.*)"/) {
+ my $descr = $1;
+ $device->{description} = "|$descr";
+
+ #- I: Bus=0011 Vendor=0002 Product=0008 Version=7321
+ #- N: Name="AlpsPS/2 ALPS GlidePoint"
+ #- P: Phys=isa0060/serio1/input0
+ #- H: Handlers=mouse1 event2 ts1
+ #- B: EV=f
+ #- B: KEY=420 0 70000 0 0 0 0 0 0 0 0 #=> BTN_LEFT BTN_RIGHT BTN_MIDDLE BTN_TOOL_FINGER BTN_TOUCH
+ #- or B: KEY=420 0 670000 0 0 0 0 0 0 0 0 #=> same with BTN_BACK
+ #- B: REL=3 #=> X Y
+ #- B: ABS=1000003 #=> X Y PRESSURE
+
+ #- I: Bus=0011 Vendor=0002 Product=0008 Version=2222
+ #- N: Name="AlpsPS/2 ALPS DualPoint TouchPad"
+ #- P: Phys=isa0060/serio1/input0
+ #- S: Sysfs=/class/input/input2
+ #- H: Handlers=mouse1 ts1 event2
+ #- B: EV=f
+ #- B: KEY=420 0 70000 0 0 0 0 0 0 0 0
+ #- B: REL=3
+ #- B: ABS=1000003
+
+ #- I: Bus=0011 Vendor=0002 Product=0007 Version=0000
+ #- N: Name="SynPS/2 Synaptics TouchPad"
+ #- P: Phys=isa0060/serio1/input0
+ #- S: Sysfs=/class/input/input1
+ #- H: Handlers=mouse0 event1 ts0
+ #- B: EV=b
+ #- B: KEY=6420 0 70000 0 0 0 0 0 0 0 0 #=> BTN_LEFT BTN_RIGHT BTN_MIDDLE BTN_TOOL_FINGER BTN_TOUCH BTN_TOOL_TRIPLETAP
+ #- or B: KEY=6420 0 670000 0 0 0 0 0 0 0 0 #=> same with BTN_BACK
+ #- or B: KEY=420 30000 670000 0 0 0 0 0 0 0 0 #=> same without BTN_TOOL_TRIPLETAP but with BTN_B
+ #- B: ABS=11000003 #=> X Y PRESSURE TOOL_WIDTH
+
+ $device->{Synaptics} = $descr eq 'SynPS/2 Synaptics TouchPad';
+ $device->{ALPS} = $descr =~ m!^AlpsPS/2 ALPS!;
+
+ } elsif (/H: Handlers=(\w+)/) {
+ $device->{driver} = $1;
+ } elsif (/P: Phys=(.*)/) {
+ $device->{location} = $1;
+ $device->{bus} = 'isa' if $device->{location} =~ /^isa/;
+ $device->{bus} = 'usb' if $device->{location} =~ /^usb/i;
+ } elsif (/B: REL=(.* )?(.*)/) {
+ #- REL=3 #=> X Y
+ #- REL=103 #=> X Y WHEEL
+ #- REL=143 #=> X Y HWHEEL WHEEL
+ #- REL=1c3 #=> X Y HWHEEL DIAL WHEEL
+ my $REL = hex($2);
+ $device->{HWHEEL} = 1 if $REL & (1 << 6);
+ $device->{WHEEL} = 1 if $REL & (1 << 8); #- not reliable ("Mitsumi Apple USB Mouse" says REL=103 and KEY=1f0000 ...)
+
+ } elsif (/B: KEY=(\S+)/) {
+ #- some KEY explained:
+ #- (but note that BTN_MIDDLE can be reported even if missing)
+ #- (and "Mitsumi Apple USB Mouse" reports 1f0000)
+ #- KEY=30000 0 0 0 0 0 0 0 0 #=> BTN_LEFT BTN_RIGHT
+ #- KEY=70000 0 0 0 0 0 0 0 0 #=> BTN_LEFT BTN_RIGHT BTN_MIDDLE
+ #- KEY=1f0000 0 0 0 0 0 0 0 0 #=> BTN_LEFT BTN_RIGHT BTN_MIDDLE BTN_SIDE BTN_EXTRA
+ my $KEY = hex($1);
+ $device->{SIDE} = 1 if $KEY & (1 << 0x13);
+
+ } elsif (/^\s*$/) {
+ push @devices, $device if $device;
+ undef $device;
+ }
+ }
+ @devices;
+}
+
+sub getInputDevices_and_usb() {
+ my @l = getInputDevices();
+
+ foreach my $usb (usb_probe()) {
+ if (my $e = find { hex($_->{vendor}) == $usb->{vendor} && hex($_->{id}) == $usb->{id} } @l) {
+ $e->{usb} = $usb;
+ }
+ }
+
+ @l;
+}
+
+sub getSerialModem {
+ my ($modules_conf, $o_mouse) = @_;
+ my $mouse = $o_mouse || {};
+ $mouse->{device} = readlink "/dev/mouse";
+ my $serdev = arch() =~ /ppc/ ? "macserial" : "serial";
+ eval { modules::load($serdev) };
+
+ my @modems;
+
+ probeSerialDevices();
+ foreach my $port (map { "ttyS$_" } (0..7)) {
+ next if $mouse->{device} =~ /$port/;
+ my $device = "/dev/$port";
+ next if !-e $device || !hasModem($device);
+ $serialprobe{$device}{device} = $device;
+ push @modems, $serialprobe{$device};
+ }
+ my @devs = pcmcia_probe();
+ foreach my $modem (@modems) {
+ #- add an alias for macserial on PPC
+ $modules_conf->set_alias('serial', $serdev) if arch() =~ /ppc/ && $modem->{device};
+ foreach (@devs) { $_->{device} and $modem->{device} = $_->{device} }
+ }
+ @modems;
+}
+
+sub getModem {
+ my ($modules_conf) = @_;
+ getSerialModem($modules_conf, {}), get_winmodems();
+}
+
+sub get_winmodems() {
+ matching_driver__regexp('www\.linmodems\.org'),
+ matching_driver(list_modules::category2modules('network/modem'),
+ list_modules::category2modules('network/slmodem'));
+}
+
+sub getBewan() {
+ matching_desc__regexp('Bewan Systems\|.*ADSL|BEWAN ADSL USB|\[Unicorn\]');
+}
+
+# generate from the following from eci driver sources:
+# perl -e 'while (<>) { print qq("$1$2",\n"$3$4",\n) if /\b([a-z\d]*)\s*([a-z\d]*)\s*([a-z\d]*)\s*([a-z\d]*)$/ }' <modems.db|sort|uniq
+sub getECI() {
+ my @ids = (
+ "05090801",
+ "05472131",
+ "06590915",
+ "071dac81",
+ "08ea00c9",
+ "09150001",
+ "09150002",
+ "091500ca",
+ "091500e7",
+ "09150101",
+ "09150102",
+ "09150204",
+ "09150206",
+ "09150802",
+ "09150916",
+ "09158000",
+ "09158001",
+ "0915ac82",
+ "0baf00e6",
+ "0e600100",
+ "0e600101",
+ "0fe88000",
+ "16900203",
+ "16900205",
+ );
+ grep { member(sprintf("%04x%04x%04x%04x", $_->{vendor}, $_->{id}, $_->{subvendor}, $_->{subid}), @ids) } usb_probe();
+}
+
+sub get_xdsl_usb_devices() {
+ my @bewan = detect_devices::getBewan();
+ $_->{driver} = $_->{bus} eq 'USB' ? 'unicorn_usb_atm' : 'unicorn_pci_atm' foreach @bewan;
+ my @eci = detect_devices::getECI();
+ $_->{driver} = 'eciusb' foreach @eci;
+ my @usb = detect_devices::probe_category('network/usb_dsl');
+ $_->{description} = "USB ADSL modem (eagle chipset)" foreach
+ grep { $_->{driver} eq 'ueagle-atm' && $_->{description} eq '(null)' } @usb;
+ @usb, @bewan, @eci;
+}
+
+sub is_lan_interface {
+ # we want LAN like interfaces here (eg: ath|br|eth|fddi|plip|ra|tr|usb|wlan).
+ # there's also bnep%d for bluetooth, bcp%d...
+ # we do this by blacklisting the following interfaces:
+ # - ippp|isdn|plip|ppp (initscripts suggest that isdn%d can be created but kernel sources claim not)
+ # ippp%d are created by drivers/isdn/i4l/isdn_ppp.c
+ # plip%d are created by drivers/net/plip.c
+ # ppp%d are created by drivers/net/ppp_generic.c
+ is_useful_interface($_[0]) &&
+ $_[0] !~ /^(?:ippp|isdn|plip|ppp)/;
+}
+
+sub is_useful_interface {
+ # - sit0 which is *always* created by net/ipv6/sit.c, thus is always created since net.agent loads ipv6 module
+ # - wifi%d are created by 3rdparty/hostap/hostap_hw.c (pseudo statistics devices, #14523)
+ # ax*, rose*, nr*, bce* and scc* are Hamradio devices (#28776)
+ $_[0] !~ /^(?:lo|sit0|wifi|ax|rose|nr|bce|scc)/;
+}
+
+sub is_wireless_interface {
+ my ($interface) = @_;
+ #- some wireless drivers don't always support the SIOCGIWNAME ioctl
+ #- ralink devices need to be up to support it
+ #- wlan-ng (prism2_*) need some special tweaks to support it
+ #- use sysfs as fallback to detect wireless interfaces,
+ #- i.e interfaces for which get_wireless_stats() is available
+ c::isNetDeviceWirelessAware($interface) || -e "/sys/class/net/$interface/wireless";
+}
+
+sub get_all_net_devices() {
+ # we need both detection schemes since:
+ # - get_netdevices() use the SIOCGIFCONF ioctl that does not list interfaces that are down
+ # - /proc/net/dev does not list VLAN and IP aliased interfaces
+ uniq(
+ (map { if_(/^\s*([A-Za-z0-9:\.]*):/, $1) } cat_("/proc/net/dev")),
+ c::get_netdevices(),
+ );
+}
+
+sub get_lan_interfaces() { grep { is_lan_interface($_) } get_all_net_devices() }
+sub get_net_interfaces() { grep { is_useful_interface($_) } get_all_net_devices() }
+sub get_wireless_interface() { find { is_wireless_interface($_) } get_lan_interfaces() }
+
+sub is_bridge_interface {
+ my ($interface) = @_;
+ -f "/sys/class/net/$interface/bridge/bridge_id";
+}
+
+sub get_ids_from_sysfs_device {
+ my ($dev_path) = @_;
+ my $dev_cat = sub { chomp_(cat_("$dev_path/$_[0]")) };
+ my $usb_root = -f "$dev_path/bInterfaceNumber" && "../" || -f "$dev_path/idVendor" && "";
+ my $is_pcmcia = -f "$dev_path/card_id";
+ my $sysfs_ids;
+ my $bus = get_sysfs_field_from_link($dev_path, "bus");
+ #- FIXME: use $bus
+ if ($is_pcmcia) {
+ $sysfs_ids = { modalias => $dev_cat->('modalias') };
+ } else {
+ $sysfs_ids = $bus eq 'ieee1394' ?
+ {
+ version => "../vendor_id",
+ specifier_id => "specifier_id",
+ specifier_version => "version",
+ } :
+ defined $usb_root ?
+ { id => $usb_root . 'idProduct', vendor => $usb_root . 'idVendor' } :
+ { id => "device", subid => "subsystem_device", vendor => "vendor", subvendor => "subsystem_vendor" };
+ $_ = hex($dev_cat->($_)) foreach values %$sysfs_ids;
+ if ($bus eq 'pci') {
+ my $device = basename(readlink $dev_path);
+ my @ids = $device =~ /^(.{4}):(.{2}):(.{2})\.(.+)$/;
+ @{%$sysfs_ids}{qw(pci_domain pci_bus pci_device pci_function)} = map { hex($_) } @ids if @ids;
+ }
+ }
+ $sysfs_ids;
+}
+
+sub device_matches_sysfs_ids {
+ my ($device, $sysfs_ids) = @_;
+ every { defined $device->{$_} && member($device->{$_}, $sysfs_ids->{$_}, 0xffff) } keys %$sysfs_ids;
+}
+
+sub device_matches_sysfs_device {
+ my ($device, $dev_path) = @_;
+ device_matches_sysfs_ids($device, get_ids_from_sysfs_device($dev_path));
+}
+
+#sub getISDN() {
+# mapgrep(sub {member (($_[0] =~ /\s*(\w*):/), @netdevices), $1 }, split(/\n/, cat_("/proc/net/dev")));
+#}
+
+sub getUPS() {
+ my @usb_devices = map { ($_->{name} = $_->{description}) =~ s/.*\|//; $_ } grep { $_->{description} !~ /GamePad|IR Combo Device|Joystick|SideWinder/ } usb_probe();
+
+ # MGE serial PnP devices:
+ (map {
+ $_->{port} = $_->{DEVICE};
+ $_->{bus} = "Serial";
+ $_->{driver} = "mge-utalk" if $_->{MODEL} =~ /0001/;
+ $_->{driver} = "mge-shut" if $_->{MODEL} =~ /0002/;
+ $_->{media_type} = 'UPS';
+ $_->{description} = "MGE UPS SYSTEMS|UPS - Uninterruptible Power Supply" if $_->{MODEL} =~ /000[12]/;
+ $_;
+ } grep { $_->{DESCRIPTION} =~ /MGE UPS/ } values %serialprobe),
+ # USB UPSs;
+ (grep { $_->{driver} = 'hidups' if $_->{driver} eq 'usbhid'; $_->{description} =~ /American Power Conversion\|Back-UPS/ } @usb_devices),
+ (map {
+ $_->{port} = "auto";
+ $_->{media_type} = 'UPS';
+ $_->{driver} = 'newhidups';
+ $_;
+ } grep { $_->{driver} =~ /ups$/ && $_->{description} !~ /American Power Conversion\|Back-UPS|Chicony|Keyboard|Logitech|SAITEK|WingMan/ } @usb_devices);
+}
+
+$pcitable_addons = <<'EOF';
+# add here lines conforming the pcitable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
+EOF
+
+$usbtable_addons = <<'EOF';
+# add here lines conforming the usbtable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
+EOF
+
+sub install_addons {
+ my ($prefix) = @_;
+
+ #- this test means install_addons can only be called after ldetect-lst has been installed.
+ if (-d "$prefix/usr/share/ldetect-lst") {
+ my $update = 0;
+ foreach ([ 'pcitable.d', $pcitable_addons ], [ 'usbtable.d', $usbtable_addons ]) {
+ my ($dir, $str) = @$_;
+ -d "$prefix/usr/share/ldetect-lst/$dir" && $str =~ /^[^#]/m and $update = 1 and
+ output "$prefix/usr/share/ldetect-lst/$dir/95drakx.lst", $str;
+ }
+ $update and run_program::rooted($prefix, "/usr/sbin/update-ldetect-lst");
+ }
+}
+
+sub add_addons {
+ my ($addons, @l) = @_;
+
+ foreach (split "\n", $addons) {
+ /^\s/ and die qq(bad detect_devices::probeall_addons line "$_");
+ s/^#.*//;
+ s/"(.*?)"/$1/g;
+ next if /^$/;
+ my ($vendor, $id, $driver, $description) = split("\t", $_, 4) or die qq(bad detect_devices::probeall_addons line "$_");
+ foreach (@l) {
+ $_->{vendor} == hex $vendor && $_->{id} == hex $id or next;
+ put_in_hash($_, { driver => $driver, description => $description });
+ }
+ }
+ @l;
+}
+
+my (@pci, @usb);
+sub pci_probe__real() {
+ add_addons($pcitable_addons, map {
+ my %l;
+ @l{qw(vendor id subvendor subid pci_domain pci_bus pci_device pci_function media_type nice_media_type driver description)} = split "\t";
+ $l{$_} = hex $l{$_} foreach qw(vendor id subvendor subid);
+ $l{bus} = 'PCI';
+ $l{sysfs_device} = sprintf('/sys/bus/pci/devices/%04x:%02x:%02x.%d', $l{pci_domain}, $l{pci_bus}, $l{pci_device}, $l{pci_function});
+ \%l;
+ } c::pci_probe());
+}
+sub pci_probe() {
+ if ($::isStandalone && @pci) {
+ @pci;
+ } else {
+ @pci = pci_probe__real();
+ }
+}
+
+sub usb_probe__real() {
+ -e "/proc/bus/usb/devices" or return;
+
+ add_addons($usbtable_addons, map {
+ my %l;
+ @l{qw(vendor id media_type driver description pci_bus pci_device)} = split "\t";
+ $l{media_type} = join('|', grep { $_ ne '(null)' } split('\|', $l{media_type}));
+ $l{$_} = hex $l{$_} foreach qw(vendor id);
+ $l{sysfs_device} = "/sys/class/usb_device/usbdev$l{pci_bus}.$l{pci_device}/device";
+ $l{bus} = 'USB';
+ \%l;
+ } c::usb_probe());
+}
+sub usb_probe() {
+ if ($::isStandalone && @usb) {
+ @usb;
+ } else {
+ @usb = usb_probe__real();
+ }
+}
+
+sub firewire_probe() {
+ my $dev_dir = '/sys/bus/ieee1394/devices';
+ my @l = map {
+ my $dir = "$dev_dir/$_";
+ my $get = sub { chomp_(cat_($_[0])) };
+ {
+ version => hex($get->("$dir/../vendor_id")),
+ specifier_id => hex($get->("$dir/specifier_id")),
+ specifier_version => hex($get->("$dir/version")),
+ bus => 'Firewire',
+ };
+ } grep { -f "$dev_dir/$_/specifier_id" } all($dev_dir);
+
+ my $e;
+ foreach (cat_('/proc/bus/ieee1394/devices')) {
+ if (m!Vendor/Model ID: (.*) \[(\w+)\] / (.*) \[(\w+)\]!) {
+ push @l, $e = {
+ vendor => hex($2), id => hex($4),
+ description => join('|', $1, $3),
+ bus => 'Firewire',
+ };
+ } elsif (/Software Specifier ID: (\w+)/) {
+ $e->{specifier_id} = hex $1;
+ } elsif (/Software Version: (\w+)/) {
+ $e->{specifier_version} = hex $1;
+ }
+ }
+
+ foreach (@l) {
+ if ($_->{specifier_id} == 0x00609e && $_->{specifier_version} == 0x010483) {
+ add2hash($_, { driver => 'sbp2', description => "Generic Firewire Storage Controller" });
+ } elsif ($_->{specifier_id} == 0x00005e && $_->{specifier_version} == 0x000001) {
+ add2hash($_, { driver => 'eth1394', description => "IEEE 1394 IPv4 Driver (IPv4-over-1394 as per RFC 2734)" });
+ }
+ }
+ @l;
+}
+
+sub pcmcia_controller_probe() {
+ my ($controller) = probe_category('bus/pcmcia');
+ if (!$controller && !$::testing && !$::noauto && arch() =~ /i.86/) {
+ my $driver = c::pcmcia_probe();
+ $controller = { driver => $driver, description => "PCMCIA controller ($driver)" } if $driver;
+ }
+ $controller;
+}
+
+sub pcmcia_probe() {
+ require modalias;
+ require modules;
+ my $dev_dir = '/sys/bus/pcmcia/devices';
+ map {
+ my $dir = "$dev_dir/$_";
+ my $get = sub { chomp_(cat_("$dir/$_[0]")) };
+ my $class_dev = first(glob_("$dir/tty*"));
+ my $device = $class_dev && get_sysfs_field_from_link($dir, basename($class_dev));
+ my $modalias = $get->('modalias');
+ my $driver = get_sysfs_field_from_link($dir, 'driver');
+ #- fallback on modalias result
+ #- but only if the module isn't loaded yet (else, it would already be binded)
+ #- this prevents from guessing the wrong driver for multi-function devices
+ my $module = $modalias && first(modalias::get_modules($modalias));
+ $driver ||= !member($module, modules::loaded_modules()) && $module;
+ {
+ description => join(' ', grep { $_ } map { $get->("prod_id$_") } 1 .. 4),
+ driver => $driver,
+ if_($modalias, modalias => $modalias),
+ if_($device, device => $device),
+ bus => 'PCMCIA',
+ };
+ } all($dev_dir);
+}
+
+my $dmi_probe;
+sub dmi_probe() {
+ $dmi_probe ||= [ map {
+ /(.*?)\t(.*)/ && { bus => 'DMI', driver => $1, description => $2 };
+ } $> ? () : c::dmi_probe() ];
+ @$dmi_probe;
+}
+
+# pcmcia_probe provides field "device", used in network.pm
+# => probeall with $probe_type is unsafe
+sub probeall() {
+ return if $::noauto;
+
+ pci_probe(), usb_probe(), firewire_probe(), pcmcia_probe(), dmi_probe();
+}
+sub probeall__real() {
+ return if $::noauto;
+ pci_probe__real(), usb_probe__real(), firewire_probe(), pcmcia_probe(), dmi_probe();
+}
+sub matching_desc__regexp {
+ my ($regexp) = @_;
+ grep { $_->{description} =~ /$regexp/i } probeall();
+}
+sub matching_driver__regexp {
+ my ($regexp) = @_;
+ grep { $_->{driver} =~ /$regexp/i } probeall();
+}
+
+sub matching_driver {
+ my (@list) = @_;
+ grep { member($_->{driver}, @list) } probeall();
+}
+sub probe_name {
+ my ($name) = @_;
+ map { $_->{driver} =~ /^$name:(.*)/ } probeall();
+}
+sub probe_unique_name {
+ my ($name) = @_;
+ my @l = uniq(probe_name($name));
+ if (@l > 1) {
+ log::l("oops, more than one $name from probe: ", join(' ', @l));
+ }
+ $l[0];
+}
+
+sub stringlist {
+ my ($b_verbose) = @_;
+ map {
+ my $ids = $b_verbose || $_->{description} eq '(null)' ? sprintf("vendor:%04x device:%04x", $_->{vendor}, $_->{id}) : '';
+ my $subids = $_->{subid} && $_->{subid} != 0xffff ? sprintf("subv:%04x subd:%04x", $_->{subvendor}, $_->{subid}) : '';
+ sprintf("%-16s: %s%s%s",
+ $_->{driver} || 'unknown',
+ $_->{description},
+ $_->{media_type} ? sprintf(" [%s]", $_->{media_type}) : '',
+ $ids || $subids ? " ($ids" . ($ids && $subids && " ") . "$subids)" : '',
+ );
+ } probeall();
+}
+
+sub tryOpen($) {
+ my $F;
+ sysopen($F, devices::make($_[0]), c::O_NONBLOCK()) && $F;
+}
+
+sub tryWrite($) {
+ my $F;
+ sysopen($F, devices::make($_[0]), 1 | c::O_NONBLOCK()) && $F;
+}
+
+my @dmesg;
+sub syslog() {
+ if (-r "/tmp/syslog") {
+ map { /<\d+>(.*)/ } cat_("/tmp/syslog");
+ } else {
+ @dmesg = `/bin/dmesg` if !@dmesg;
+ @dmesg;
+ }
+}
+
+sub get_mac_model() {
+ my $mac_model = cat_("/proc/device-tree/model") || die "Can not open /proc/device-tree/model";
+ log::l("Mac model: $mac_model");
+ $mac_model;
+}
+
+sub get_mac_generation() {
+ cat_('/proc/cpuinfo') =~ /^pmac-generation\s*:\s*(.*)/m ? $1 : "Unknown Generation";
+}
+
+sub hasSMP() {
+ return if $::testing;
+ (any { /NR_CPUS limit of 1 reached/ } syslog()) ||
+ any { /\bProcessor #(\d+)\s+(\S*)/ && $1 > 0 && $2 ne 'invalid' } syslog();
+}
+sub hasPCMCIA() { $::o->{pcmcia} } #- because /proc/pcmcia seems not to be present on 2.4 at least (or use /var/run/stab)
+
+my (@dmis, $dmidecode_already_runned);
+
+# we return a list b/c several DMIs have the same name:
+sub dmidecode() {
+ return @dmis if $dmidecode_already_runned;
+
+ return if $>;
+ my ($ver, @l) = run_program::get_stdout('dmidecode');
+
+ my $tab = "\t";
+ if ($ver =~ /(\d+\.\d+)/ && $1 >= 2.7) {
+ #- new dmidecode output is less indented
+ $tab = '';
+ #- drop header
+ shift @l while @l && $l[0] ne "\n";
+ }
+
+ foreach (@l) {
+ if (/^$tab\t(.*)/) {
+ $dmis[-1]{string} .= "$1\n";
+ $dmis[-1]{$1} = $2 if /^$tab\t(.*): (.*)$/;
+ } elsif (my ($s) = /^$tab(.*)/) {
+ next if $s =~ /^$/ || $s =~ /\bDMI type \d+/;
+ $s =~ s/ Information$//;
+ push @dmis, { name => $s };
+ }
+ }
+ $dmidecode_already_runned = 1;
+ @dmis;
+}
+sub dmidecode_category {
+ my ($cat) = @_;
+ my @l = grep { $_->{name} eq $cat } dmidecode();
+ wantarray() ? @l : $l[0] || {};
+}
+
+#- size in MB
+sub dmi_detect_memory() {
+ my @l1 = map { $_->{'Enabled Size'} =~ /(\d+) MB/ && $1 } dmidecode_category('Memory Module');
+ my @l2 = map { $_->{'Form Factor'} =~ /^(SIMM|SIP|DIP|DIMM|RIMM|SODIMM|SRIMM)$/ &&
+ ($_->{Size} =~ /(\d+) MB/ && $1 || $_->{Size} =~ /(\d+) kB/ && $1 * 1024);
+ } dmidecode_category('Memory Device');
+ max(sum(@l1), sum(@l2));
+}
+
+sub computer_info() {
+ my $Chassis = dmidecode_category('Chassis')->{Type} =~ /(\S+)/ && $1;
+
+ my $date = dmidecode_category('BIOS')->{'Release Date'} || '';
+ my $BIOS_Year = $date =~ m!(\d{4})! && $1 ||
+ $date =~ m!\d\d/\d\d/(\d\d)! && "20$1";
+
+ +{
+ isLaptop => member($Chassis, 'Portable', 'Laptop', 'Notebook', 'Hand Held', 'Sub Notebook', 'Docking Station'),
+ if_($BIOS_Year, BIOS_Year => $BIOS_Year),
+ };
+}
+
+#- try to detect a laptop, we assume pcmcia service is an indication of a laptop or
+#- the following regexp to match graphics card apparently only used for such systems.
+sub isLaptop() {
+ arch() =~ /ppc/ ?
+ get_mac_model() =~ /Book/ :
+ computer_info()->{isLaptop}
+ || (matching_desc__regexp('C&T.*655[45]\d') || matching_desc__regexp('C&T.*68554') ||
+ matching_desc__regexp('Neomagic.*Magic(Media|Graph)') ||
+ matching_desc__regexp('ViRGE.MX') || matching_desc__regexp('S3.*Savage.*[IM]X') ||
+ matching_desc__regexp('ATI.*(Mobility|LT)'))
+ || cat_('/proc/cpuinfo') =~ /\bmobile\b/i
+ || probe_unique_name("Type") eq 'laptop'
+ #- ipw2100/2200/3945 are Mini-PCI (Express) adapters
+ || (any { member($_->{driver}, qw(ipw2100 ipw2200 ipw3945)) } pci_probe());
+}
+
+sub BIGMEM() {
+ arch() !~ /x86_64|ia64/ && $> == 0 && dmi_detect_memory() > 4 * 1024;
+}
+
+sub is_i586() {
+ my $cpuinfo = cat_('/proc/cpuinfo');
+ $cpuinfo =~ /^cpu family\s*:\s*(\d+)/m && $1 < 6 ||
+ !has_cpu_flag('cmov');
+}
+
+sub is_xbox() {
+ any { $_->{vendor} == 0x10de && $_->{id} == 0x02a5 } pci_probe();
+}
+
+sub has_cpu_flag {
+ my ($flag) = @_;
+ cat_('/proc/cpuinfo') =~ /^flags.*\b$flag\b/m;
+}
+
+sub matching_types() {
+ +{
+ laptop => isLaptop(),
+ '64bit' => to_bool(arch() =~ /64/),
+ wireless => to_bool(get_wireless_interface() || probe_category('network/wireless')),
+ };
+}
+
+sub usbWacom() { grep { $_->{driver} =~ /wacom/ } usb_probe() }
+sub usbKeyboards() { grep { $_->{media_type} =~ /\|Keyboard/ } usb_probe() }
+sub usbStorage() { grep { $_->{media_type} =~ /Mass Storage\|/ } usb_probe() }
+sub has_mesh() { find { /mesh/ } all_files_rec("/proc/device-tree") }
+sub has_53c94() { find { /53c94/ } all_files_rec("/proc/device-tree") }
+
+sub usbKeyboard2country_code {
+ my ($usb_kbd) = @_;
+ my ($F, $tmp);
+ sysopen($F, sprintf("/proc/bus/usb/%03d/%03d", $usb_kbd->{pci_bus}, $usb_kbd->{pci_device}), 0) and
+ sysseek $F, 0x28, 0 and
+ sysread $F, $tmp, 1 and
+ unpack("C", $tmp);
+}
+
+sub probeSerialDevices() {
+ require list_modules;
+ require modules;
+ modules::append_to_modules_loaded_at_startup_for_all_kernels(modules::load_category($::o->{modules_conf}, 'various/serial'));
+ foreach (0..3) {
+ #- make sure the device are created before probing,
+ devices::make("/dev/ttyS$_");
+ #- and make sure the device is a real terminal (major is 4).
+ int((stat "/dev/ttyS$_")[6]/256) == 4 or $serialprobe{"/dev/ttyS$_"} = undef;
+ }
+
+ #- for device already probed, we can safely (assuming device are
+ #- not moved during install :-)
+ #- include /dev/mouse device if using an X server.
+ mkdir_p("/var/lock");
+ -l "/dev/mouse" and $serialprobe{"/dev/" . readlink "/dev/mouse"} = undef;
+ foreach (keys %serialprobe) { m|^/dev/(.*)| and touch "/var/lock/LCK..$1" }
+
+ print STDERR "Please wait while probing serial ports...\n";
+ #- start probing all serial ports... really faster than before ...
+ #- ... but still take some time :-)
+ my %current;
+ foreach (run_program::get_stdout('serial_probe')) {
+ if (/^\s*$/) {
+ $serialprobe{$current{DEVICE}} = { %current } if $current{DEVICE};
+ %current = ();
+ } elsif (/^([^=]+)=(.*?)\s*$/) {
+ $current{$1} = $2;
+ }
+ }
+
+ foreach (values %serialprobe) {
+ $_->{DESCRIPTION} =~ /modem/i and $_->{CLASS} = 'MODEM'; #- hack to make sure a modem is detected.
+ $_->{DESCRIPTION} =~ /olitec/i and $_->{CLASS} = 'MODEM'; #- hack to make sure such modem gets detected.
+ log::l("probed $_->{DESCRIPTION} of class $_->{CLASS} on device $_->{DEVICE}");
+ }
+}
+
+sub probeSerial($) { $serialprobe{$_[0]} }
+
+sub hasModem($) {
+ $serialprobe{$_[0]} && $serialprobe{$_[0]}{CLASS} eq 'MODEM' && $serialprobe{$_[0]}{DESCRIPTION};
+}
+
+sub hasMousePS2 {
+ my $t; sysread(tryOpen($_[0]) || return, $t, 256) != 1 || $t ne "\xFE";
+}
+
+sub usb_description2removable {
+ local ($_) = @_;
+ return 'camera' if /\bcamera\b/i;
+ return 'memory_card' if /\bmemory\s?stick\b/i || /\bcompact\s?flash\b/i || /\bsmart\s?media\b/i;
+ return 'memory_card' if /DiskOnKey/i || /IBM-DMDM/i;
+ return 'zip' if /\bzip\s?(100|250|750)/i;
+ return 'floppy' if /\bLS-?120\b/i;
+ return;
+}
+
+sub usb2removable {
+ my ($e) = @_;
+ $e->{usb_driver} or return;
+
+ if ($e->{usb_driver} =~ /Removable:(.*)/) {
+ return $1;
+ } elsif (my $name = usb_description2removable($e->{usb_description})) {
+ return $name;
+ }
+ undef;
+}
+
+sub suggest_mount_point {
+ my ($e) = @_;
+
+ my $name = $e->{media_type};
+ if (member($e->{media_type}, 'hd', 'fd')) {
+ if (exists $e->{usb_driver}) {
+ $name = usb2removable($e) || 'removable';
+ } elsif (isZipDrive($e)) {
+ $name = 'zip';
+ } elsif ($e->{media_type} eq 'fd') {
+ $name = 'floppy';
+ } else {
+ log::l("suggest_mount_point: do not know what to with hd $e->{device}");
+ }
+ }
+ $name;
+}
+
+1;
+
+#- Local Variables:
+#- mode:cperl
+#- tab-width:8
+#- End:
generated by cgit v1.2.1 (git 2.21.0) at 2025-01-06 06:06:46 +0000