summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Makefile2
-rw-r--r--docs/TODO7
-rw-r--r--perl-install/Xconfigurator_consts.pm3
-rw-r--r--perl-install/devices.pm2
-rw-r--r--perl-install/fs.pm2
-rw-r--r--perl-install/install2.pm116
-rw-r--r--perl-install/install_any.pm2
-rw-r--r--perl-install/install_steps.pm11
-rw-r--r--perl-install/install_steps_interactive.pm10
-rw-r--r--perl-install/modules.pm4
-rw-r--r--perl-install/pkgs.pm2
-rwxr-xr-xupdate_kernel4
12 files changed, 110 insertions, 55 deletions
diff --git a/Makefile b/Makefile
index 352969cf9..0dda119f0 100644
--- a/Makefile
+++ b/Makefile
@@ -27,4 +27,4 @@ $(BOOT_IMG:%=%f): %f: %
dd if=$< of=/dev/fd0
xmessage "Floppy done"
-# mkisofs -R -b images/gi_cdrom.img -c images/b /tmp/r /mnt/disk/ | cdrecord -v -eject speed=6 dev=1,0 - \ No newline at end of file
+# mkisofs -R -b images/gi_cdrom.img -c images/.catalog /tmp/r /mnt/disk/ | cdrecord -v -eject speed=6 dev=1,0 - \ No newline at end of file
diff --git a/docs/TODO b/docs/TODO
index dd72e6770..8024c59b1 100644
--- a/docs/TODO
+++ b/docs/TODO
@@ -1,6 +1,5 @@
-ddcprobe for pnp monitors
-
kickstart like
+tolook qw(fstab )
upgrade
@@ -77,3 +76,7 @@ try detect_devices::floppies (and how are scsi floppies handled?)
maybe: do a iotcl FDGETPRM to detect fd1, fd0.
test smp (is it enough to scan /proc/cpuinfo for multiple /^processor/ lines?)
+
+use ddcprobe monitor's size info for pnp monitors
+use ddcprobe video card memory size info
+use ddcprobe modelines to reduce the available resolutions
diff --git a/perl-install/Xconfigurator_consts.pm b/perl-install/Xconfigurator_consts.pm
index 1f7529164..b279bbde9 100644
--- a/perl-install/Xconfigurator_consts.pm
+++ b/perl-install/Xconfigurator_consts.pm
@@ -12,8 +12,7 @@ use common qw(:common);
$resolution_wanted = "1024x768";
@resolutions = qw(640x480 800x600 1024x768 1152x864 1280x1024 1600x1200);
-
-@accelservers = qw(S3 Mach32 Mach8 8514 P9000 AGX W32 Mach64 I128 S3V 3DLabs);
+@accelservers = qw(S3 Mach32 Mach8 8514 P9000 AGX W32 Mach64 Rage128 I128 S3V 3DLabs);
@allservers = (qw(Mono VGA16 SVGA), @accelservers);
%videomemory = (
diff --git a/perl-install/devices.pm b/perl-install/devices.pm
index f29ac194b..877e22680 100644
--- a/perl-install/devices.pm
+++ b/perl-install/devices.pm
@@ -103,7 +103,7 @@ sub make($) {
#- make a directory for this inode if needed.
mkdir dirname($file), 0755;
- syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or die "mknod failed (dev:$_): $!";
+ syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or die "mknod failed (dev $_): $!";
$file;
}
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
index 45045e508..d597140a9 100644
--- a/perl-install/fs.pm
+++ b/perl-install/fs.pm
@@ -208,6 +208,8 @@ sub write($$) {
}
write_fstab($fstab, $prefix, $cddev);
+ return if $::g_auto_install;
+
devices::make "$prefix/dev/$_->{device}" foreach grep { $_->{device} && !isNfs($_) } @$fstab;
}
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index e43b47ded..e28c8a9a2 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -2,6 +2,7 @@ package install2;
use diagnostics;
use strict;
+use Data::Dumper;
use vars qw($o);
@@ -16,6 +17,7 @@ use lang;
use keyboard;
use fs;
use fsedit;
+use devices;
use partition_table qw(:types);
use pkgs;
use printer;
@@ -23,8 +25,6 @@ use modules;
use detect_devices;
use modparm;
use run_program;
-use install_steps_graphical;
-
#-######################################################################################
#- Steps table
@@ -260,12 +260,12 @@ my %suggestedPartitions = (
#-if you want to do a kickstart file, you just have to add all the required fields (see for example
#-the variable $default)
#-#######################################################################################
-$o = $::o = {
+$o = {
bootloader => { onmbr => 1, linear => 0 },
autoSCSI => 0,
mkbootdisk => 1, #- no mkbootdisk if 0 or undef, find a floppy with 1
#- packages => [ qw() ],
- partitioning => { clearall => $::testing, eraseBadPartitions => 0, auto_allocate => 0, autoformat => 0 },
+ partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0, autoformat => 0 },
#- partitions => [
#- { mntpoint => "/boot", size => 16 << 11, type => 0x83 },
#- { mntpoint => "/", size => 256 << 11, type => 0x83 },
@@ -349,11 +349,9 @@ sub selectLanguage {
$o->selectLanguage;
addToBeDone {
- unless ($o->{isUpgrade}) {
- lang::write($o->{prefix});
- keyboard::write($o->{prefix}, $o->{keyboard});
- }
- } 'doInstallStep';
+ lang::write($o->{prefix});
+ keyboard::write($o->{prefix}, $o->{keyboard});
+ } 'doInstallStep' unless $o->{isUpgrade} || $::g_auto_install;
}
#------------------------------------------------------------------------------
@@ -364,8 +362,8 @@ sub selectKeyboard {
$o->selectKeyboard;
#- if we go back to the selectKeyboard, you must rewrite
addToBeDone {
- keyboard::write($o->{prefix}, $o->{keyboard}) unless $o->{isUpgrade};
- } 'doInstallStep';
+ keyboard::write($o->{prefix}, $o->{keyboard});
+ } 'doInstallStep' unless $o->{isUpgrade} || $::g_auto_install;
}
#------------------------------------------------------------------------------
@@ -382,7 +380,7 @@ sub selectInstallClass {
$::expert = $o->{installClass} eq "expert";
$::beginner = $o->{installClass} eq "beginner";
- $o->{partitions} = $suggestedPartitions{$o->{installClass}};
+ $o->{partitions} ||= $suggestedPartitions{$o->{installClass}};
install_any::setPackages($o, \@install_classes) if $o->{steps}{choosePackages}{entered} > 1;
}
@@ -396,7 +394,6 @@ sub setupSCSI {
}
#------------------------------------------------------------------------------
-#-PADTODO
sub partitionDisks {
$o->{drives} = [ detect_devices::hds() ];
$o->{hds} = catch_cdie { fsedit::hds($o->{drives}, $o->{partitioning}) }
@@ -492,7 +489,7 @@ sub addUser {
#------------------------------------------------------------------------------
#-PADTODO
sub createBootdisk {
- fs::write($o->{prefix}, $o->{fstab}) unless $o->{isUpgrade};
+ fs::write($o->{prefix}, $o->{fstab});
modules::write_conf("$o->{prefix}/etc/conf.modules", 'append');
$o->createBootdisk($_[1] == 1);
}
@@ -516,6 +513,25 @@ sub exitInstall { $o->exitInstall }
sub main {
$SIG{__DIE__} = sub { chomp $_[0]; log::l("ERROR: $_[0]") };
+ $::beginner = $::expert = $::g_auto_install = 0;
+ while (@_) {
+ local $_ = shift;
+ if (/--method/) {
+ $o->{method} = shift;
+ } elsif (/--step/) {
+ $o->{steps}{first} = shift;
+ } elsif (/--expert/) {
+ $::expert = 1;
+ } elsif (/--beginner/) {
+ $::beginner = 1;
+ #} elsif (/--ks/ || /--kickstart/) {
+ # $::auto_install = 1;
+ } elsif (/--g_auto_install/) {
+ $::testing = $::g_auto_install = 1;
+ $o->{partitioning}{auto_allocate} = 1;
+ }
+ }
+
#- if this fails, it's okay -- it might help with free space though
unlink "/sbin/install" unless $::testing;
unlink "/sbin/insmod" unless $::testing;
@@ -525,6 +541,10 @@ sub main {
log::l("second stage install running");
log::ld("extra log messages are enabled");
+ #-really needed ??
+ spawnSync();
+ eval { spawnShell() };
+
$o->{prefix} = $::testing ? "/tmp/test-perl-install" : "/mnt";
mkdir $o->{prefix}, 0755;
@@ -532,14 +552,39 @@ sub main {
$ENV{PATH} = "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin:$o->{prefix}/sbin:$o->{prefix}/bin:$o->{prefix}/usr/sbin:$o->{prefix}/usr/bin:$o->{prefix}/usr/X11R6/bin";
$ENV{LD_LIBRARY_PATH} = "";
- #-really needed ??
- spawnSync();
- eval { spawnShell() };
+ if ($::auto_install) {
+ require 'install_steps.pm';
+ fs::mount(devices::make("fd0"), "/mnt", "vfat", 0);
+
+ my $O = $o;
+ my $f = "/mnt/auto_inst.cfg";
+ {
+ local *F;
+ open F, $f or die _("Error reading file $f");
+
+ local $/ = "\0";
+ eval <F>;
+ }
+ $@ and die _("Bad kickstart file %s (failed %s)", $f, $@);
+ fs::umount("/mnt");
+ add2hash($o, $O);
+ } else {
+ require 'install_steps_graphical.pm';
+ }
+
+ $o->{prefix} = $::testing ? "/tmp/test-perl-install" : "/mnt";
+ mkdir $o->{prefix}, 0755;
+
+ #- make sure we don't pick up any gunk from the outside world
+ $ENV{PATH} = "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin:$o->{prefix}/sbin:$o->{prefix}/bin:$o->{prefix}/usr/sbin:$o->{prefix}/usr/bin:$o->{prefix}/usr/X11R6/bin";
+ $ENV{LD_LIBRARY_PATH} = "";
#- needed very early for install_steps_graphical
$o->{mouse} = install_any::mouse_detect() unless $::testing || $o->{mouse};
- $o = install_steps_graphical->new($o);
+ $::o = $o = $::auto_install ?
+ install_steps->new($o) :
+ install_steps_graphical->new($o);
$o->{netc} = network::read_conf("/tmp/network");
if (my ($file) = glob_('/tmp/ifcfg-*')) {
@@ -549,29 +594,15 @@ sub main {
}
modules::load_deps("/modules/modules.dep");
- modules::get_stage1_conf("/tmp/conf.modules");
+ $o->{modules} = modules::get_stage1_conf($o->{modules}, "/tmp/conf.modules");
modules::read_already_loaded();
modparm::read_modparm_file("/usr/share/modparm.lst");
- while (@_) {
- local $_ = shift;
- if (/--method/) {
- $o->{method} = $_ = shift;
- if (/ftp/) {
- require 'ftp.pm';
- local $^W = 0;
- *install_any::getFile = \&ftp::getFile;
- }
- } elsif (/--step/) {
- $o->{steps}{first} = shift;
- } elsif (/--expert/) {
- $::expert = 1;
- } else {
- $::expert = 0;
- }
-
+ if ($o->{method} && $o->{method} eq "ftp") {
+ require 'ftp.pm';
+ local $^W = 0;
+ *install_any::getFile = \&ftp::getFile;
}
-
#-the main cycle
my $clicked = 0;
@@ -581,6 +612,7 @@ sub main {
eval {
&{$install2::{$o->{step}}}($clicked, $o->{steps}{$o->{step}}{entered});
};
+ $o->kill_action;
$clicked = 0;
while ($@) {
local $_ = $@;
@@ -599,6 +631,16 @@ sub main {
killCardServices();
log::l("installation complete, leaving");
+
+ if ($::g_auto_install) {
+ my $h = $o; $o = {};
+ $h->{$_} and $o->{$_} = $h->{$_} foreach qw(lang autoSCSI printer mouse netc timezone bootloader superuser intf keyboard mkbootdisk base user modules installClass partitions);
+
+ delete $o->{user}{password2};
+ delete $o->{superuser}{password2};
+
+ print Data::Dumper->Dump([$o], ['$o']), "\0";
+ }
}
sub killCardServices {
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index 0820eb24e..f9b604bc6 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -98,7 +98,7 @@ sub getAvailableSpace {
sub setPackages($$) {
my ($o, $install_classes) = @_;
- unless ($o->{package}) {
+ unless ($o->{packages}) {
my $useHdlist = $o->{method} !~ /nfs|hd/;
eval { $o->{packages} = pkgs::psUsingHdlist() } if $useHdlist;
$o->{packages} = pkgs::psUsingDirectory() if !$useHdlist || $@;
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index 584bf1fb3..4736a98c9 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -40,7 +40,6 @@ sub new($$) {
sub enteringStep($$) {
my ($o, $step) = @_;
log::l("starting step `$step'");
- $o->kill;
for (my $s = $o->{steps}{first}; $s; $s = $o->{steps}{$s}{next}) {
@@ -69,7 +68,8 @@ so continue at your own risk :("), $@ ]) if $@;
}
}
-sub errorInStep($$) {}
+sub errorInStep($$) { print "error :(\n"; exit 1 }
+sub kill_action {}
#-######################################################################################
@@ -99,7 +99,8 @@ sub setupSCSI { modules::load_thiskind('scsi') }
#------------------------------------------------------------------------------
sub doPartitionDisks($$) {
my ($o, $hds) = @_;
- fsedit::auto_allocate($hds, $o->{partitions});
+ return if $::testing;
+ partition_table::write($_) foreach $hds;
}
#------------------------------------------------------------------------------
@@ -210,8 +211,7 @@ sub setRootPassword($) {
$u{password} = crypt_($u{password}) if $u{password};
- my $f = "$p/etc/passwd";
- my @lines = cat_($f, "failed to open file $f");
+ my @lines = cat_(my $f = "$p/etc/passwd") or log::l("missing passwd file"), return;
local *F;
open F, "> $f" or die "failed to write file $f: $!\n";
@@ -273,6 +273,7 @@ sub createBootdisk($) {
#------------------------------------------------------------------------------
sub setupBootloader($) {
my ($o) = @_;
+ return if $::g_auto_install;
my $versionString = versionString();
lilo::install($o->{prefix}, $o->{hds}, $o->{fstab}, $versionString, $o->{bootloader});
}
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 4bb7e6aab..6bff4e7ff 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -35,6 +35,10 @@ sub errorInStep($$) {
$o->ask_warn(_("Error"), [ _("An error occurred"), $err ]);
}
+sub kill_action {
+ my ($o) = @_;
+ $o->kill;
+}
#-######################################################################################
#- Steps Functions
@@ -175,7 +179,7 @@ _("Please enter the IP configuration for this machine.
Each item should be entered as an IP address in dotted-decimal
notation (for example, 1.2.3.4)."),
[ _("IP address:"), _("Netmask:")],
- [ \$intf->{IPADDR}, \$intf->{NETMASK}],
+ [ \$intf->{IPADDR}, \$intf->{NETMASK} ],
complete => sub {
for (my $i = 0; $i < @fields; $i++) {
unless (network::is_ip($intf->{$fields[$i]})) {
@@ -202,7 +206,7 @@ _("Please enter your host name.
Your host name should be a fully-qualified host name,
such as ``mybox.mylab.myco.com''.
Also give the gateway if you have one"),
- [_("Host name:"), _("DNS server:"), _("Gateway:"), _("Gateway device:")],
+ [_("Host name:"), _("DNS server:"), _("Gateway:"), !$::beginner ? _("Gateway device:") : ()],
[(map { \$netc->{$_}} qw(HOSTNAME dnsServer GATEWAY)),
{val => \$netc->{GATEWAYDEV}, list => \@devices}]
);
@@ -214,7 +218,7 @@ sub timeConfig {
$o->{timezone}{GMT} = $o->ask_yesorno('', _("Is your hardware clock set to GMT?"), $o->{timezone}{GMT});
$o->{timezone}{timezone} ||= timezone::bestTimezone(lang::lang2text($o->{lang}));
- $o->{timezone}{timezone} = $o->ask_from_list('', _("In which timezone are you"), [ timezone::getTimeZones($o->{prefix}) ], $o->{timezone}{timezone});
+ $o->{timezone}{timezone} = $o->ask_from_list('', _("In which timezone are you"), [ timezone::getTimeZones($::g_auto_install ? '' : $o->{prefix}) ], $o->{timezone}{timezone});
install_steps::timeConfig($o,$f);
}
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
index d0c38d49c..22584aa1b 100644
--- a/perl-install/modules.pm
+++ b/perl-install/modules.pm
@@ -285,10 +285,12 @@ sub write_conf {
}
sub get_stage1_conf {
- %conf = read_conf($_[0], \$scsi);
+ %conf = read_conf($_[1], \$scsi);
+ add2hash(\%conf, $_[0]);
$conf{parport_lowlevel}{alias} ||= "parport_pc";
$conf{pcmcia_core}{"pre-install"} ||= "/etc/rc.d/init.d/pcmcia start";
$conf{plip}{"pre-install"} ||= "modprobe parport_pc ; echo 7 > /proc/parport/0/irq";
+ \%conf;
}
sub load_thiskind($;&) {
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
index 6a6bf002d..c14b8ebc1 100644
--- a/perl-install/pkgs.pm
+++ b/perl-install/pkgs.pm
@@ -263,6 +263,8 @@ sub getHeader($) {
sub install {
my ($prefix, $toInstall, $isUpgrade, $force) = @_;
+ return if $::g_auto_install;
+
c::rpmReadConfigFiles() or die "can't read rpm config files";
my $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
diff --git a/update_kernel b/update_kernel
index 2c09b7cbd..7bf747e64 100755
--- a/update_kernel
+++ b/update_kernel
@@ -1,7 +1,7 @@
#!/bin/bash
KERNEL_VERSION="*BOOT"
-KERNEL_VERSION="2.2.11-BOOT"
+KERNEL_VERSION="2.2.12chmouBOOT"
SCSI_DRIVERS="
53c7,8xx.o AM53C974.o BusLogic.o NCR53c406a.o advansys.o aha152x.o
@@ -33,7 +33,7 @@ MISCMODULES="lp.o parport_pc.o parport.o loop.o"
FSMODULES="vfat.o fat.o"
NETWORK_MODULES="$MISCMODULES $FSMODULES $NETWORK_DRIVERS"
-CDROM_MODULES=" $MISCMODULES $FSMODULES $SCSI_DRIVERS $CD_DRIVERS"
+CDROM_MODULES=" $MISCMODULES $FSMODULES $SCSI_DRIVERS $CD_DRIVERS isofs.o"
HD_MODULES=" $MISCMODULES $FSMODULES $SCSI_DRIVERS $BLOCK_DRIVERS"