diff options
-rw-r--r-- | perl-install/modules.pm | 5 | ||||
-rw-r--r-- | perl-install/network/isdn.pm | 44 | ||||
-rw-r--r-- | perl-install/network/isdn_consts.pm | 44 | ||||
-rw-r--r-- | perl-install/network/netconnect.pm | 1 | ||||
-rw-r--r-- | perl-install/network/tools.pm | 4 |
5 files changed, 62 insertions, 36 deletions
diff --git a/perl-install/modules.pm b/perl-install/modules.pm index b11d87aa3..5892fca1b 100644 --- a/perl-install/modules.pm +++ b/perl-install/modules.pm @@ -471,6 +471,11 @@ sub get_options { $conf{$name}{options}; } +sub set_options { + my ($name, $new_option) = @_; + $conf{$name}{options} = $new_option; +} + sub add_alias { my ($alias, $name) = @_; $name =~ /ignore/ and return; diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm index f412e4d30..e8992b4ce 100644 --- a/perl-install/network/isdn.pm +++ b/perl-install/network/isdn.pm @@ -1,5 +1,6 @@ package network::isdn; +use network::isdn_consts; use common qw(:common :file :system); use any; use modules; @@ -58,28 +59,20 @@ We recommand the light configuration. 1; } -#- isdn_write_config_backend : write isdn info, only for ippp0 -> ask_connect_now -#- input : -#- $isdn -#- $light : boolean : if yes : uses the isdn-light package, if not, isdn4net -#- $isdn input: -#- $isdn->{login} $isdn->{passwd} $isdn->{phone_in} $isdn->{phone_out} $isdn->{dialing_mode} -#- $isdn->{driver} $isdn->{type} $isdn->{irq} $isdn->{mem} $isdn->{io} $isdn->{io0} $isdn->{io1} sub isdn_write_config_backend { my ($isdn, $light) = @_; if ($light) { modules::mergein_conf("$prefix/etc/modules.conf"); - if ($netc->{autodetect}{isdn}{id}) { + if ($isdn->{id}) { @c = any::setup_thiskind($in, 'isdn', !$::expert, 1); modules::add_alias("ippp0", $c[0]{driver}); isdn_detect_backend($isdn); } else { my $a=""; defined $isdn->{$_} and $a .= "$_=" . $isdn->{$_} . " " foreach qw(type protocol mem io io0 io1 irq); + modules::add_alias("ippp0", $isdn->{driver}); modules::set_options($isdn->{driver}, $a); } - - $::isStandalone and modules::write_conf($prefix); foreach my $f ('ioptions1B', 'ioptions2B') { substInFile { s/^name .*\n//; $_ .= "name $isdn->{login}\n" if eof } "$prefix/etc/ppp/$f"; @@ -87,8 +80,8 @@ sub isdn_write_config_backend { } foreach my $f ('isdn1B.conf', 'isdn2B.conf') { substInFile { - s/EAZ = .*\n/EAZ = $isdn->{phone_in}/; - s/PHONE_OUT = .*\n/PHONE_OUT = $isdn->{phone_out}/; + s/EAZ =.*/EAZ = $isdn->{phone_in}/; + s/PHONE_OUT =.*/PHONE_OUT = $isdn->{phone_out}/; } "$prefix/etc/isdn/$f"; chmod 0600, $f; } @@ -204,11 +197,10 @@ If you have a PCMCIA card, you have to know the irq and io of your card. isdn_ask_step_2: $e = $in->ask_from_listf(_("ISDN Configuration"), - _("Which is your ISDN card ?"), - sub { $_[0]{description} }, - [ grep {$_->{card} eq $isdn->{card_type}; } @network::netconnect::isdndata ] ) or goto isdn_ask_step_1; - $isdn->{driver}='hisax'; - $e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(type mem io io0 io1 irq); + _("Which is your ISDN card ?"), + sub { $_[0]{description} }, + [ grep {$_->{card} eq $isdn->{card_type}; } @isdndata ] ) or goto isdn_ask_step_1; + $e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(driver type mem io io0 io1 irq); isdn_ask_step_3: $isdn->{protocol} = isdn_ask_protocol() or goto isdn_ask_step_2; @@ -239,12 +231,6 @@ sub isdn_detect { 1; } -#- isdn_detect_backend : detects isdn pci card and fills the infos in $isdn : only detects one card -#- input -#- $isdn -#- $isdn output: -#- $isdn->{description} $isdn->{vendor} $isdn->{id} $isdn->{driver} $isdn->{card_type} $isdn->{type} - sub isdn_detect_backend { my ($isdn) = @_; if (my ($c) = (modules::get_that_type('isdn'))) { @@ -256,24 +242,16 @@ sub isdn_detect_backend { modules::set_options($c->{driver}, $c->{options} . " protocol=" . $isdn->{protocol}); } $c->{options} =~ /protocol=(\d)/ and $isdn->{protocol} = $1; - print "plop " . $c->{options} . "\n"; } } -#- isdn_get_list : return isdn cards descriptions list. This function is not use internally. -#- output : descriptions : list of strings - sub isdn_get_list { - map { $_->{description} } @network::netconnect::isdndata; + map { $_->{description} } @isdndata; } -#- isdn_get_info : return isdn card infos. This function is not use internally. -#- input : the description of the card (see isdn_get_list) -#- output : a reference on the decription of the card. : ref on a hash(description,type,irq,mem,io,io0,io1card,) - sub isdn_get_info { my ($desc) = @_; - foreach (@network::netconnect::isdndata) { + foreach (@isdndata) { return $_ if ($_->{description} eq $desc); } } diff --git a/perl-install/network/isdn_consts.pm b/perl-install/network/isdn_consts.pm index ceb241c50..09c52139f 100644 --- a/perl-install/network/isdn_consts.pm +++ b/perl-install/network/isdn_consts.pm @@ -3,6 +3,7 @@ package network::isdn; # $Id$ @isdndata = ( {description => "Teles 16.0 (ISA)", #1 irq, mem, io + driver => 'hisax', type => '1', irq => '5', mem => '0xd000', @@ -10,24 +11,28 @@ package network::isdn; # $Id$ card => 'isa', }, {description => "Teles 8.0 (ISA)", #2 irq, mem + driver => 'hisax', type => '2', irq => '9', mem => '0xd800', card => 'isa', }, {description => "Teles 16.3 (ISA non PnP)", #3 irq, io + driver => 'hisax', type => '3', irq => '9', io => '0xd80', card => 'isa', }, {description => "Teles 16.3c (ISA PnP)", #14 irq, io + driver => 'hisax', type => '14', irq => '9', io => '0xd80', card => 'isa', }, {description => "Creatix/Teles (ISA PnP)", #4 irq, io0 (ISAC), io1 (HSCX) + driver => 'hisax', type => '4', irq => '5', io0 => '0x0000', @@ -35,127 +40,151 @@ package network::isdn; # $Id$ card => 'isa', }, {description => "Teles generic (PCI)", #21 no parameter + driver => 'hisax', type => '21', card => 'pci', }, {description => "Teles 16.3 (PCMCIA)", #8 irq, io + driver => 'hisax', type => '8', irq => '', io => '0x', card => 'isa', }, {description => "Teles S0Box", #25 irq, io (of the used lpt port) + driver => 'hisax', type => '25', irq => '7', io => '0x378', card => 'isa', }, {description => "ELSA PCC/PCF cards (ISA)", #6 io or nothing for autodetect (the io is required only if you have n>1 ELSA card ) + driver => 'hisax', type => '6', io => "", card => 'isa', }, {description => "ELSA Quickstep 1000 (ISA)", #7 irq, io (from isapnp setup) + driver => 'hisax', type => '7', irq => '5', io => '0x300', card => 'isa', }, {description => "ELSA Quickstep 1000 (PCI)", #18 no parameter + driver => 'hisax', type => '18', card => 'pci', }, {description => "ELSA generic (PCMCIA)", #10 irq, io (set with card manager) + driver => 'hisax', type => '10', irq => '', io => '0x', card => 'isa', }, {description => "ITK ix1-micro Rev.2 (ISA)", #9 irq, io + driver => 'hisax', type => '9', irq => '9', io => '0xd80', card => 'isa', }, {description => "Eicon.Diehl Diva (ISA PnP)", #11 irq, io + driver => 'hisax', type => '11', irq => '9', io => '0x180', card => 'isa', }, {description => "Eicon.Diehl Diva (PCI)", #11 no parameter + driver => 'hisax', type => '11', card => 'pci', }, {description => "ASUS COM ISDNLink (ISA)", #12 irq, io (from isapnp setup) + driver => 'hisax', type => '12', irq => '5', io => '0x200', card => 'isa', }, {description => "ASUS COM ISDNLink (PCI)", #12 + driver => 'hisax', type => '35', card => 'pci', }, {description => "DynaLink (PCI)", #12 + driver => 'hisax', type => '12', card => 'pci', }, {description => "HFC-2BS0 based cards (ISA)", #13 irq, io + driver => 'hisax', type => '13', irq => '9', io => '0xd80', card => 'isa', }, {description => "HFC 2BDS0 (PCI)", #35 none + driver => 'hisax', type => '35', card => 'pci', }, {description => "HFC 2BDS0 S+, SP (PCMCIA)", #37 irq,io (pcmcia must be set with cardmgr) + driver => 'hisax', type => '37', card => 'isa', }, {description => "Sedlbauer Speed Card (ISA)", #15 irq, io + driver => 'hisax', type => '15', irq => '9', io=> '0xd80', card => 'isa', }, {description => "Sedlbauer PC/104 (ISA)", #15 irq, io + driver => 'hisax', type => '15', irq => '9', io => '0xd80', card => 'isa', }, {description => "Sedlbauer Speed Card (PCI)", #15 no parameter + driver => 'hisax', type => '15', card => 'pci', }, {description => "Sedlbauer Speed Star (PCMCIA)", #22 irq, io (set with card manager) + driver => 'hisax', type => '22', irq => '', io => '0x', card => 'isa', }, {description => "Sedlbauer Speed Fax+ (ISA Pnp)", #28 irq, io (from isapnp setup) + driver => 'hisax', type => '28', irq => '9', io => '0xd80', card => 'isa', }, {description => "USR Sportster internal (ISA)", #16 irq, io + driver => 'hisax', type => '16', irq => '9', io=> '0xd80', card => 'isa', }, {description => "MIC card (ISA)", #17 irq, io + driver => 'hisax', type => '17', irq => '9', io => '0xd80', card => 'isa', }, {description => "Compaq ISDN S0 card (ISA)", #19 irq, io0, io1, io (from isapnp setup io=IO2) + driver => 'hisax', type => '19', irq => '5', io => '0x0000', @@ -164,10 +193,12 @@ package network::isdn; # $Id$ card => 'isa', }, {description => "NETjet card (PCI)", #20 no parameter + driver => 'hisax', type => '20', card => 'pci', }, {description => "Dr. Neuhaus Niccy (ISA PnP)", #24 irq, io0, io1 (from isapnp setup) + driver => 'hisax', type => '24', irq => '5', io0 => '0x0000', @@ -175,31 +206,37 @@ package network::isdn; # $Id$ card => 'isa', }, {description => "Dr. Neuhaus Niccy (PCI)", ##24 no parameter + driver => 'hisax', type => '24', card => 'pci', }, {description => "AVM A1 (Fritz!) (ISA non PnP)", #5 irq, io + driver => 'hisax', type => '5', irq => '10', io => '0x300', card => 'isa', }, {description => "AVM (Fritz!) (ISA Pnp)", #27 irq, io (from isapnp setup) + driver => 'hisax', type => '27', irq => '5', io => '0x300', card => 'isa', }, {description => "AVM A1 (Fritz!) (PCMCIA)", #26 irq, io (set with card manager) + driver => 'hisax', type => '26', irq => '', card => 'isa', }, {description => "AVM PCI (Fritz!) (PCI)", #27 no parameter + driver => 'hisax', type => '27', card => 'pci', }, {description => "Siemens I-Surf 1.0 (ISA Pnp)", #29 irq, io, memory (from isapnp setup) + driver => 'hisax', type => '29', irq => '9', io => '0xd80', @@ -207,36 +244,43 @@ package network::isdn; # $Id$ card => 'isa', }, {description => "ACER P10 (ISA Pnp)", #30 irq, io (from isapnp setup) + driver => 'hisax', type => '30', irq => '5', io => '0x300', card => 'isa', }, {description => "HST Saphir (ISA Pnp)", #31 irq, io + driver => 'hisax', type => '31', irq => '5', io => '0x300', card => 'isa', }, {description => "Telekom A4T (PCI)", #32 none + driver => 'hisax', type => '32', card => 'pci', }, {description => "Scitel Quadro (PCI)", #33 subcontroller (4*S0, subctrl 1...4) + driver => 'hisax', type => '33', card => 'pci', }, {description => "Gazel ISDN cards (ISA)", #34 irq,io + driver => 'hisax', type => '34', irq => '5', io => '0x300', card => 'isa', }, {description => "Gazel ISDN cards (PCI)", #34 none + driver => 'hisax', type => '34', card => 'pci', }, {description => "W6692 and Winbond based cards (PCI)", #36 none + driver => 'hisax', type => '36', card => 'pci', } diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm index 47f4029ab..5d39df4c1 100644 --- a/perl-install/network/netconnect.pm +++ b/perl-install/network/netconnect.pm @@ -9,7 +9,6 @@ use common qw(:common :file :functional :system); use log; use detect_devices; use run_program; -use network::netconnect_consts; use modules; use any; use mouse; diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm index aff57e9b1..60dc94104 100644 --- a/perl-install/network/tools.pm +++ b/perl-install/network/tools.pm @@ -65,8 +65,8 @@ sub ask_info2 { if__ ($cnx->{phone_in}, { label => _("Your personal phone number"), val => \$cnx->{phone_in} }), if__ ($netc->{DOMAINNAME2}, { label => _("Provider name (ex provider.net)"), val => \$netc->{DOMAINNAME2} }), if__ ($cnx->{phone_out}, { label => _("Provider phone number"), val => \$cnx->{phone_out} }), - if__ ($netc->{dnsServer2}, { label => _("Provider dns 1"), val => \$netc->{dnsServer2} }), - if__ ($netc->{dnsServer3}, { label => _("Provider dns 2"), val => \$netc->{dnsServer3} }), + if__ ($netc->{dnsServer2}, { label => _("Provider dns 1 (optional)"), val => \$netc->{dnsServer2} }), + if__ ($netc->{dnsServer3}, { label => _("Provider dns 2 (optional)"), val => \$netc->{dnsServer3} }), if__ ($cnx->{dialing_mode}, { label => _("Dialing mode"), val => \$cnx->{dialing_mode}, list => [ "auto", "manual"] }), if__ ($cnx->{login}, { label => _("Account Login (user name)"), val => \$cnx->{login} }), if__ ($cnx->{passwd}, { label => _("Account Password"), val => \$cnx->{passwd} }), |