summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--perl-install/Makefile2
-rw-r--r--perl-install/Xconfig.pm3
-rw-r--r--perl-install/install2.pm13
-rw-r--r--perl-install/install_any.pm10
-rw-r--r--perl-install/install_steps.pm28
-rw-r--r--perl-install/install_steps_interactive.pm7
-rw-r--r--perl-install/modules.pm28
-rw-r--r--perl-install/pkgs.pm50
-rw-r--r--perl-install/share/list1
9 files changed, 106 insertions, 36 deletions
diff --git a/perl-install/Makefile b/perl-install/Makefile
index f764a05be..1f1db5421 100644
--- a/perl-install/Makefile
+++ b/perl-install/Makefile
@@ -160,6 +160,8 @@ get_needed_files: $(SO_FILES)
# echo -e "#!/bin/sh\n\nexec '/usr/bin/sh'" > $(DEST)/usr/bin/runinstall2
# chmod a+x $(DEST)/usr/bin/runinstall2
+ cp -a ../install/install1_pcmcia/etc/pcmcia $(DEST)/etc
+
as_root:
/bin/dd if=/dev/zero of=/tmp/initrd bs=1k count=4000
echo y | /sbin/mke2fs /tmp/initrd
diff --git a/perl-install/Xconfig.pm b/perl-install/Xconfig.pm
index 6158873df..f44a9ad21 100644
--- a/perl-install/Xconfig.pm
+++ b/perl-install/Xconfig.pm
@@ -71,10 +71,11 @@ sub getinfoFromXF86Config {
$o->{monitor}{vsyncrange} ||= $1 if /^\s*VertRefresh\s+(.*)/;
$o->{monitor}{vendor} ||= $1 if /^\s*VendorName\s+"(.*?)"/;
$o->{monitor}{model} ||= $1 if /^\s*ModelName\s+"(.*?)"/;
+ $o->{monitor}{modelines} .= $_ if /^\s*Mode[lL]ine\s+/;
} elsif (my $s = /^Section "Screen"/ .. /^EndSection/) {
$driver = undef if $s == 1;
$driver = $1 if /^\s*Driver\s+"(.*?)"/;
- print "($driver eq $Xconfigurator::serversdriver{$o->{card}{server}})";
+ #- print "($driver eq $Xconfigurator::serversdriver{$o->{card}{server}})";
if ($driver eq $Xconfigurator::serversdriver{$o->{card}{server}}) { #- take into account the right screen section for the server.
$o->{card}{default_depth} ||= $1 if /^\s*DefaultColorDepth\s+(\d+)/;
if (my $i = /^\s*Subsection\s+"Display"/ .. /^\s*EndSubsection/) {
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index d19240f9c..f50f289a5 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -75,6 +75,7 @@ $installSteps{first} = $installSteps[0];
#-#####################################################################################
#-INTERN CONSTANT
#-#####################################################################################
+
#- these strings are used in quite a lot of places and must not be changed!!!!!
my @install_classes = (__("beginner"), __("developer"), __("server"), __("expert"));
@@ -412,6 +413,8 @@ sub choosePackages {
#------------------------------------------------------------------------------
sub doInstallStep {
+ $o->readBootloaderConfigBeforeInstall if $_[1] == 1;
+
$o->beforeInstallPackages;
$o->installPackages($o->{packages});
$o->afterInstallPackages;
@@ -423,8 +426,8 @@ sub configureNetwork {
if ($o->{isUpgrade} && !$clicked) {
$o->{netc} or $o->{netc} = {};
- add2hash($o->{netc}, { network::read_conf("$o->{prefix}/etc/sysconfig/network") });
- add2hash($o->{netc}, { network::read_resolv_conf("$o->{prefix}/etc/resolv.conf") });
+ add2hash($o->{netc}, { network::read_conf("$o->{prefix}/etc/sysconfig/network") }) if -r "$o->{prefix}/etc/sysconfig/network";;
+ add2hash($o->{netc}, { network::read_resolv_conf("$o->{prefix}/etc/resolv.conf") }) if -r "$o->{prefix}/etc/resolv.conf";
foreach (all("$o->{prefix}/etc/sysconfig/network-scripts")) {
if (/ifcfg-(\w*)/) {
push @{$o->{intf}}, { network::read_conf("$o->{prefix}/etc/sysconfig/network-scripts/$_") };
@@ -518,7 +521,13 @@ sub main {
#- if this fails, it's okay -- it might help with free space though
unlink "/sbin/install" unless $::testing;
+ unlink "/sbin/cardmgr" unless $::testing;
unlink "/sbin/insmod" unless $::testing;
+ unlink "/sbin/rmmod" unless $::testing;
+ unlink "/modules/pcmcia_core.o" unless $::testing;
+ unlink "/modules/i82365.o" unless $::testing;
+ unlink "/modules/tcic.o" unless $::testing;
+ unlink "/modules/ds.o" unless $::testing;
print STDERR "in second stage install\n";
log::openLog(($::testing || $o->{localInstall}) && 'debug.log');
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index 56e5be526..c77448218 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -99,8 +99,8 @@ sub getAvailableSpace {
do { $_->{mntpoint} eq '/' and return $_->{size} * 512 } foreach @{$o->{fstab}};
if ($::testing) {
- log::l("taking 2000MB for testing");
- return 2000 << 20;
+ log::l("taking 200MB for testing");
+ return 200 << 20;
}
die "missing root partition";
}
@@ -124,6 +124,8 @@ sub setPackages($$) {
push @{$o->{base}}, "kernel-pcmcia-cs" if $o->{pcmcia};
}
+ #- this will be done if necessary in the selectPackagesToUpgrade,
+ #- move the selection here ? this will remove the little window.
unless ($o->{isUpgrade}) {
do {
my $p = $o->{packages}{$_} or log::l("missing base package $_"), next;
@@ -138,7 +140,7 @@ sub setPackages($$) {
sub selectPackagesToUpgrade($) {
my ($o) = @_;
- pkgs::selectPackagesToUpgrade($o->{packages}, $o->{prefix});
+ pkgs::selectPackagesToUpgrade($o->{packages}, $o->{prefix}, $o->{base});
}
sub addToBeDone(&$) {
@@ -149,7 +151,7 @@ sub addToBeDone(&$) {
push @{$::o->{steps}{$step}{toBeDone}}, $f;
}
-sub install_cpio {
+sub install_cpio($$) {
my ($dir, $name) = @_;
return "$dir/$name" if -e "$dir/$name";
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index 26bb636af..37667a202 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -285,9 +285,35 @@ sub createBootdisk($) {
}
#------------------------------------------------------------------------------
-sub setupBootloaderBefore {
+sub readBootloaderConfigBeforeInstall {
my ($o) = @_;
+ my ($image, $v);
add2hash($o->{bootloader} ||= {}, lilo::read($o->{prefix}, "/etc/lilo.conf"));
+
+ #- since kernel or kernel-smp may not be upgraded, it should be checked
+ #- if there is a need to update existing lilo.conf entries by using that
+ #- hash.
+ my %ofpkgs = (
+ 'vmlinuz' => 'kernel',
+ 'vmlinuz-smp' => 'kernel-smp',
+ );
+
+ #- change the /boot/vmlinuz or /boot/vmlinuz-smp entries to follow symlink.
+ foreach $image (keys %ofpkgs) {
+ if ($o->{bootloader}{entries}{"/boot/$image"} && $o->{packages}{$ofpkgs{$image}}{selected}) {
+ $v = readlink "$o->{prefix}/boot/$image";
+ if ($v) {
+ $v = "/boot/$v" if $v !~ m@/@;
+ $o->{bootloader}{entries}{$v} = $o->{bootloader}{entries}{"/boot/$image"};
+ delete $o->{bootloader}{entries}{"/boot/$image"};
+ log::l("renaming /boot/$image entry by $v");
+ }
+ }
+ }
+}
+
+sub setupBootloaderBefore {
+ my ($o) = @_;
lilo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion());
$o->{bootloader}{keytable} ||= keyboard::kmap($o->{keyboard});
}
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 41052c851..03899cb83 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -82,7 +82,7 @@ sub selectRootPartition($@) {
$o->{upgradeRootPartition} =
$o->ask_from_list_(_("Root Partition"),
_("What is the root partition (/) of your system?"),
- [ @partitions ], $o->{upgradeRootPartitions});
+ [ @partitions ]);
#- TODO check choice, then mount partition in $o->{prefix} and autodetect.
#- install_steps::selectRootPartition($o);
}
@@ -552,6 +552,7 @@ sub setupBootloaderBefore {
$o->SUPER::setupBootloaderBefore($o);
}
+#------------------------------------------------------------------------------
sub setupBootloader {
my ($o, $more) = @_;
my $b = $o->{bootloader};
@@ -725,13 +726,13 @@ Do you want to try again with other parameters?", $l), 1) or return;
#------------------------------------------------------------------------------
sub load_thiskind {
my ($o, $type) = @_;
- my $w;
+ my ($pcmcia, $w) = $o->{pcmcia} unless $::expert && modules::pcmcia_need_config($o->{pcmcia}) && $o->ask_yesorno('', _("Skip PCMCIA probing", 1));
modules::load_thiskind($type, sub {
$w = $o->wait_message('',
[ _("Installing driver for %s card %s", $type, $_->[0]),
$::beginner ? () : _("(module %s)", $_->[1])
]);
- });
+ }, $pcmcia);
}
#------------------------------------------------------------------------------
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
index 0b53dfa7a..60ca503b2 100644
--- a/perl-install/modules.pm
+++ b/perl-install/modules.pm
@@ -268,13 +268,13 @@ sub get_stage1_conf {
\%conf;
}
-sub load_thiskind($;&) {
- my ($type, $f) = @_;
+sub load_thiskind($;&$) {
+ my ($type, $f, $pcic) = @_;
my @pcidevs = pci_probing::main::probe($type);
log::l("pci probe found " . scalar @pcidevs . " $type devices");
- my @pcmciadevs = get_pcmcia_devices($type);
+ my @pcmciadevs = get_pcmcia_devices($type, $pcic);
log::l("pcmcia probe found " . scalar @pcmciadevs . " $type devices");
my @devs = (@pcidevs, @pcmciadevs);
@@ -290,10 +290,28 @@ sub load_thiskind($;&) {
@devs;
}
-sub get_pcmcia_devices($) {
- my ($type) = @_;
+sub pcmcia_need_config($) {
+ return $_[0] && ! -s "/var/run/stab";
+}
+
+sub get_pcmcia_devices($$) {
+ my ($type, $pcic) = @_;
my (@devs, $module, $desc);
+ #- try to setup pcmcia if cardmgr is not running.
+ if (pcmcia_need_config($pcic)) {
+ log::l("i try to configure pcmcia services");
+
+ symlink("/tmp/rhimage/etc/pcmcia", "/etc/pcmcia") unless -e "/etc/pcmcia";
+
+ load("pcmcia_core");
+ load($pcic);
+ load("ds");
+
+ #- run cardmgr in foreground while it is configuring the card.
+ run_program::run("cardmgr", "-f", "-m" ,"/modules");
+ }
+
foreach (cat_("/var/run/stab")) {
$desc = $1 if /^Socket\s+\d+:\s+(.*)/;
$module = $1 if /^\d+\s+$type[^\s]*\s+([^\s]+)/;
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
index bc873e86c..8570e2e07 100644
--- a/perl-install/pkgs.pm
+++ b/perl-install/pkgs.pm
@@ -292,8 +292,8 @@ sub getHeader($) {
$p->{header};
}
-sub selectPackagesToUpgrade($$) {
- my ($packages, $prefix) = @_;
+sub selectPackagesToUpgrade($$$) {
+ my ($packages, $prefix, $base) = @_;
log::l("reading /usr/lib/rpm/rpmrc");
c::rpmReadConfigFiles() or die "can't read rpm config files";
@@ -304,11 +304,13 @@ sub selectPackagesToUpgrade($$) {
#- mark all files which are not in /etc/rc.d/ for packages which are already installed but which
#- are not in the packages list to upgrade.
+ #- the 'installed' property will make a package unable to be selected, look at select.
c::rpmdbTraverse($db, sub {
my ($header) = @_;
my $p = $packages->{c::headerGetEntry($header, 'name')};
if ($p) {
- $p->{installed} = 1 if c::headerGetEntry($header, 'version') ge $p->{version};
+ eval { getHeader($p) }; $@ && log::l("cannot get the header for package $p->{name}"); #- not having a header will cause using a bad test for version, should change but a header should always be available.
+ $p->{installed} = 1 if $p->{header} ? c::rpmVersionCompare($header, $p->{header}) >= 0 : c::headerGetEntry($header, 'version') ge $p->{version};
} else {
my @installedFiles = c::headerGetEntry($header, 'filenames');
@installedFilesForUpgrade{grep { $_ !~ m@^/etc/rc.d/@ } @installedFiles} = ();
@@ -319,13 +321,18 @@ sub selectPackagesToUpgrade($$) {
foreach (values %$packages) {
my $p = $_;
my $skipThis = 0;
- $skipThis ||= 1 if c::rpmdbNameTraverse($db, $p->{name}, sub {
- my ($header) = @_;
- $skipThis ||= (c::headerGetEntry($header, 'version') ge $p->{version});
- }) == 0; #- skip if not installed (package not found in current install).
+ my $count = c::rpmdbNameTraverse($db, $p->{name}, sub {
+ my ($header) = @_;
+ $skipThis ||= $p->{installed};
+ });
+
+ #- skip if not installed (package not found in current install).
+ $skipThis ||= ($count == 0);
#- select the package if it is already installed with a lower version or simply not installed.
unless ($skipThis) {
+ my $cumulSize;
+
pkgs::select($packages, $p) unless $p->{selected};
#- keep in mind installed files which are not being updated. doing this costs in
@@ -333,11 +340,17 @@ sub selectPackagesToUpgrade($$) {
#- all file for package marked for upgrade.
c::rpmdbNameTraverse($db, $p->{name}, sub {
my ($header) = @_;
+ $cumulSize += c::headerGetEntry($header, 'size'); #- all these will be deleted on upgrade.
my @installedFiles = c::headerGetEntry($header, 'filenames');
@installedFilesForUpgrade{ grep { $_ !~ m@^/etc/rc.d/@ } @installedFiles} = ();
});
+ eval { getHeader($p) };
my @availFiles = $p->{header} ? c::headerGetEntry($p->{header}, 'filenames') : ();
map { delete $installedFilesForUpgrade{$_} } grep { $_ !~ m@^/etc/rc.d/@ } @availFiles;
+
+ #- keep in mind the cumul size of installed package since they will be deleted
+ #- on upgrade.
+ $p->{installedCumulSize} = $cumulSize;
}
}
@@ -347,6 +360,7 @@ sub selectPackagesToUpgrade($$) {
my $p = $_;
if ($p->{selected}) {
+ eval { getHeader($p) };
my @availFiles = $p->{header} ? c::headerGetEntry($p->{header}, 'filenames') : ();
map { delete $installedFilesForUpgrade{$_} } grep { $_ !~ m@^/etc/rc.d/@ } @availFiles;
}
@@ -357,6 +371,7 @@ sub selectPackagesToUpgrade($$) {
my $p = $_;
unless ($p->{selected}) {
+ eval { getHeader($p) };
my @availFiles = $p->{header} ? c::headerGetEntry($p->{header}, 'filenames') : ();
my $toSelect = 0;
map { if (exists $installedFilesForUpgrade{$_}) {
@@ -370,22 +385,16 @@ sub selectPackagesToUpgrade($$) {
foreach (values %$packages) {
my $p = $_;
- my @obsoletes = $p->{header} ? c::headerGetEntry($p->{header}, 'obsoletes') : ();
+ eval { getHeader($p) };
+ my @obsoletes = $p->{header} ? c::headerGetEntry(getHeader($p), 'obsoletes'): ();
map { pkgs::select($packages, $p) if c::rpmdbNameTraverse($db, $_) > 0 } @obsoletes;
}
- #- consistency check: deselect all packages with a version lower to already existing.
- foreach (values %$packages) {
- my $p = $_;
- my $skipThis = 0;
- if ($p->{selected}) {
- c::rpmdbNameTraverse($db, $p->{name}, sub {
- my ($header) = @_;
- $skipThis ||= (c::headerGetEntry($header, 'version') ge $p->{version});
- });
- #- unselect the package if it is already installed with a greater or equal version.
- pkgs::unselect($packages, $p) if ($skipThis);
- }
+ #- select all base packages which are not installed and not selected.
+ foreach (@$base) {
+ my $p = $packages->{$_} or log::l("missing base package $_"), next;
+ log::l("base package $_ is not installed") unless $p->{installed} || $p->{selected}; #- installed not set on upgrade.
+ pkgs::select($packages, $p, 1) unless $p->{selected}; #- if installed it cannot be selected.
}
#- close db, job finished !
@@ -412,6 +421,7 @@ sub install($$) {
$p->{name}, $p->{version}, $p->{release},
c::headerGetEntry(getHeader($p), 'arch');
c::rpmtransAddPackage($trans, getHeader($p), $p->{file}, $p->{name} !~ /kernel/); #- TODO: replace `named kernel' by `provides kernel'
+# c::rpmtransAddPackage($trans, getHeader($p), $p->{file}, 1); #- TODO: replace `named kernel' by `provides kernel'
$nb++;
$total += $p->{size};
}
diff --git a/perl-install/share/list b/perl-install/share/list
index d8e3d7d58..57bf1526d 100644
--- a/perl-install/share/list
+++ b/perl-install/share/list
@@ -6,6 +6,7 @@
/lib/libresolv.so.2
/etc/protocols
/sbin/insmod
+/sbin/rmmod
/sbin/mkdosfs
/sbin/mke2fs
/usr/bin/bzip2
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-03 03:43:20 +0000