diff options
| -rw-r--r-- | perl-install/help.pm | 973 |
1 files changed, 502 insertions, 471 deletions
diff --git a/perl-install/help.pm b/perl-install/help.pm index 0b0e8da44..2a217ffac 100644 --- a/perl-install/help.pm +++ b/perl-install/help.pm @@ -4,51 +4,52 @@ use common; empty => '', addUser => -__("GNU/Linux is a multiuser system, and this means that each user can have his own -preferences, his own files and so on. You can read the ``User Guide'' to learn -more. But unlike root, which is the administrator, the users you will add here -will not be entitled to change anything except their own files and their own -configuration. You will have to create at least one regular user for yourself. -That account is where you should log in for routine use. Although it is very -practical to log in as root everyday, it may also be very dangerous! The -slightest mistake could mean that your system would not work any more. If you -make a serious mistake as a regular user, you may only lose some information, -but not the entire system. - -First, you have to enter your real name. This is not mandatory, of course - as -you can actually enter whatever you want. DrakX will then take the first word -you have entered in the box and will bring it over to the User name. This is the -name this particular user will use to log into the system. You can change it. -You then have to enter a password here. A non-privileged (regular) user's -password is not as crucial as that of root from a security point of view, but -that is no reason to neglect it - after all, your files are at risk. - -If you click on Accept user, you can then add as many as you want. Add a user -for each one of your friends: your father or your sister, for example. When you -finish adding all the users you want, select Done. - -Clicking the Advanced button allows you to change the default shell for that -user (bash by default)."), +__("GNU/Linux is a multiuser system, and this means that each user can have his +own preferences, his own files and so on. You can read the ``User Guide'' +to learn more. But unlike \"root\", which is the administrator, the users +you will add here will not be entitled to change anything except their own +files and their own configuration. You will have to create at least one +regular user for yourself. That account is where you should log in for +routine use. Although it is very practical to log in as \"root\" everyday, +it may also be very dangerous! The slightest mistake could mean that your +system would not work any more. If you make a serious mistake as a regular +user, you may only lose some information, but not the entire system. + +First, you have to enter your real name. This is not mandatory, of course - +as you can actually enter whatever you want. DrakX will then take the first +word you have entered in the box and will bring it over to the \"User +name\". This is the name this particular user will use to log into the +system. You can change it. You then have to enter a password here. A +non-privileged (regular) user's password is not as crucial as that of +\"root\" from a security point of view, but that is no reason to neglect it +- after all, your files are at risk. + +If you click on \"Accept user\", you can then add as many as you want. Add +a user for each one of your friends: your father or your sister, for +example. When you finish adding all the users you want, select \"Done\". + +Clicking the \"Advanced\" button allows you to change the default \"shell\" +for that user (bash by default)."), ask_mntpoint_s => -__("Listed above are the existing Linux partitions detected on your hard drive. You -can keep the choices made by the wizard, they are good for most common installs. -If you make any changes, you must at least define a root partition (\"/\"). Do -not choose too small a partition or you will not be able to install enough -software. If you want to store your data on a separate partition, you will also -need to create a partition for /home (only possible if you have more than one -Linux partition available). +__("Listed above are the existing Linux partitions detected on your hard drive. +You can keep the choices made by the wizard, they are good for most common +installs. If you make any changes, you must at least define a root +partition (\"/\"). Do not choose too small a partition or you will not +be able to install enough software. If you want to store your data on a +separate partition, you will also need to create a partition for \"/home\" +(only possible if you have more than one Linux partition available). Each partition is listed as follows: \"Name\", \"Capacity\". -\"Name\" is structured: \"hard drive type\", \"hard drive number\", \"partition -number\" (for example, \"hda1\"). +\"Name\" is structured: \"hard drive type\", \"hard drive number\", +\"partition number\" (for example, \"hda1\"). -\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and \"sd\" -if it is a SCSI hard drive. +\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and +\"sd\" if it is a SCSI hard drive. -\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE hard -drives: +\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE +hard drives: * \"a\" means \"master hard drive on the primary IDE controller\", @@ -58,273 +59,286 @@ drives: * \"d\" means \"slave hard drive on the secondary IDE controller\". -With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means \"second -lowest SCSI ID\", etc."), +With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means +\"second lowest SCSI ID\", etc."), chooseCd => -__("The Mandrake Linux installation is spread out over several CDROMs. DrakX knows -if a selected package is located on another CDROM and will eject the current CD -and ask you to insert a different one as required."), +__("The Mandrake Linux installation is spread out over several CDROMs. DrakX +knows if a selected package is located on another CDROM and will eject the +current CD and ask you to insert a different one as required."), choosePackages => -__("It is now time to specify which programs you wish to install on your system. -There are thousands of packages available for Mandrake Linux, and you are not -supposed to know them all by heart. +__("It is now time to specify which programs you wish to install on your +system. There are thousands of packages available for Mandrake Linux, and +you are not supposed to know them all by heart. If you are performing a standard installation from CDROM, you will first be -asked to specify the CDs you currently have. Check the CD labels and highlight -the boxes corresponding to the CDs you have available for installation. Click OK -when you are ready to continue. +asked to specify the CDs you currently have. Check the CD labels and +highlight the boxes corresponding to the CDs you have available for +installation. Click \"OK\" when you are ready to continue. -Packages are sorted in groups corresponding to a particular use of your machine. -The groups themselves are sorted into four sections: +Packages are sorted in groups corresponding to a particular use of your +machine. The groups themselves are sorted into four sections: - * Workstation: if you plant to use your machine as a workstation, select one or -more of the corresponding groups. + * \"Workstation\": if you plant to use your machine as a workstation, +select one or more of the corresponding groups. - * Graphical Environment: this is where you will choose your preferred graphical -environment. At least one must be selected if you want to have a graphical -workstation! + * \"Graphical Environment\": this is where you will choose your preferred +graphical environment. At least one must be selected if you want to have a +graphical workstation! - * Development: if the machine is to be used for programming, choose the desired -group(s). + * \"Development\": if the machine is to be used for programming, choose the +desired group(s). - * Server: finally, if the machine is intended to be a server, you will be able -to select which of the most common services you wish to see installed on the -machine. + * \"Server\": finally, if the machine is intended to be a server, you will +be able to select which of the most common services you wish to see +installed on the machine. -Moving the mouse cursor over a group name will display a short explanatory text -about that group. +Moving the mouse cursor over a group name will display a short explanatory +text about that group. -Clicking the Advanced button will allow you to select the Individual package -selection option. This is useful if you are familiar with the packages being -offered or if you want to have total control over what will be installed. +Clicking the \"Advanced\" button will allow you to select the \"Individual +package selection\" option. This is useful if you are familiar with the +packages being offered or if you want to have total control over what will +be installed. -If you started the installation in \"Update\" mode, you can unselect all groups -to avoid installing any new package. This is useful for repairing or updating an -existing system."), +If you started the installation in \"Update\" mode, you can unselect all +groups to avoid installing any new package. This is useful for repairing or +updating an existing system."), choosePackagesTree => __("Finally, depending on your choice of whether or not to select individual -packages, you will be presented a tree containing all packages classified by -groups and subgroups. While browsing the tree, you can select entire groups, -subgroups, or individual packages. - -Whenever you select a package on the tree, a description appears on the right. -When your selection is finished, click the Install button which will then launch -the installation process. Depending on the speed of your hardware and the number -of packages that need to be installed, it may take a while to complete the -process. A time to complete estimate is displayed on the screen to help you -gauge if there is sufficient time to enjoy a cup of coffee. - -!! If a server package has been selected either intentionally or because it was -part of a whole group, you will be asked to confirm that you really want those -servers to be installed. Under Mandrake Linux, any installed servers are started -by default at boot time. Even if they are safe and have no known issues at the -time the distribution was shipped, it may happen that security holes are -discovered after this version of Mandrake Linux was finalized. If you do not -know what a particular service is supposed to do or why it is being installed, -then click No. Clicking Yes will install the listed services and they will be -started automatically by default. !! - -The Automatic dependencies option simply disables the warning dialog which -appears whenever the installer automatically selects a package. This occurs -because it has determined that it needs to satisfy a dependency with another -package in order to successfully complete the installation. - -The tiny floppy disc icon at the bottom of the list allows to load the packages -list chosen during a previous installation. Clicking on this icon will ask you -to insert a floppy disk previously created at the end of another installation. -See the second tip of last step on how to create such a floppy."), +packages, you will be presented a tree containing all packages classified +by groups and subgroups. While browsing the tree, you can select entire +groups, subgroups, or individual packages. + +Whenever you select a package on the tree, a description appears on the +right. When your selection is finished, click the \"Install\" button which +will then launch the installation process. Depending on the speed of your +hardware and the number of packages that need to be installed, it may take +a while to complete the process. A time to complete estimate is displayed +on the screen to help you gauge if there is sufficient time to enjoy a cup +of coffee. + +!! If a server package has been selected either intentionally or because it +was part of a whole group, you will be asked to confirm that you really +want those servers to be installed. Under Mandrake Linux, any installed +servers are started by default at boot time. Even if they are safe and have +no known issues at the time the distribution was shipped, it may happen +that security holes are discovered after this version of Mandrake Linux was +finalized. If you do not know what a particular service is supposed to do +or why it is being installed, then click \"No\". Clicking \"Yes\" will +install the listed services and they will be started automatically by +default. !! + +The \"Automatic dependencies\" option simply disables the warning dialog +which appears whenever the installer automatically selects a package. This +occurs because it has determined that it needs to satisfy a dependency with +another package in order to successfully complete the installation. + +The tiny floppy disc icon at the bottom of the list allows to load the +packages list chosen during a previous installation. Clicking on this icon +will ask you to insert a floppy disk previously created at the end of +another installation. See the second tip of last step on how to create such +a floppy."), configureNetwork => __("If you wish to connect your computer to the Internet or to a local network, -please choose the correct option. Please turn on your device before choosing the -correct option to let DrakX detect it automatically. +please choose the correct option. Please turn on your device before +choosing the correct option to let DrakX detect it automatically. Mandrake Linux proposes the configuration of an Internet connection at -installation time. Available connections are: traditional modem, ISDN modem, -ADSL connection, cable modem, and finally a simple LAN connection (Ethernet). +installation time. Available connections are: traditional modem, ISDN +modem, ADSL connection, cable modem, and finally a simple LAN connection +(Ethernet). -Here, we will not detail each configuration. Simply make sure that you have all -the parameters from your Internet Service Provider or system administrator. +Here, we will not detail each configuration. Simply make sure that you have +all the parameters from your Internet Service Provider or system +administrator. -You can consult the manual chapter about Internet connections for details about -the configuration, or simply wait until your system is installed and use the -program described there to configure your connection. +You can consult the manual chapter about Internet connections for details +about the configuration, or simply wait until your system is installed and +use the program described there to configure your connection. -If you wish to configure the network later after installation or if you have -finished configuring your network connection, click Cancel."), +If you wish to configure the network later after installation or if you +have finished configuring your network connection, click \"Cancel\"."), configureServices => __("You may now choose which services you wish to start at boot time. -Here are presented all the services available with the current installation. -Review them carefully and uncheck those which are not always needed at boot -time. +Here are presented all the services available with the current +installation. Review them carefully and uncheck those which are not always +needed at boot time. -You can get a short explanatory text about a service by selecting a specific -service. However, if you are not sure whether a service is useful or not, it is -safer to leave the default behavior. +You can get a short explanatory text about a service by selecting a +specific service. However, if you are not sure whether a service is useful +or not, it is safer to leave the default behavior. -At this stage, be very careful if you intend to use your machine as a server: -you will probably not want to start any services that you do not need. Please -remember that several services can be dangerous if they are enabled on a server. -In general, select only the services you really need."), +At this stage, be very careful if you intend to use your machine as a +server: you will probably not want to start any services that you do not +need. Please remember that several services can be dangerous if they are +enabled on a server. In general, select only the services you really need."), configureTimezoneGMT => -__("GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in local -time according to the time zone you selected. +__("GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in +local time according to the time zone you selected. -If you use Microsoft Windows on this computer, choose No."), +If you use Microsoft Windows on this computer, choose \"No\"."), configureX => -__("X (for X Window System) is the heart of the GNU/Linux graphical interface on -which all the graphics environments (KDE, Gnome, AfterStep, WindowMaker...) -bundled with Mandrake Linux rely. In this section, DrakX will try to configure X -automatically. +__("X (for X Window System) is the heart of the GNU/Linux graphical interface +on which all the graphics environments (KDE, Gnome, AfterStep, +WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX +will try to configure X automatically. -It is extremely rare for it to fail, unless the hardware is very old (or very -new). If it succeeds, it will start X automatically with the best resolution -possible depending on the size of the monitor. A window will then appear and ask -you if you can see it. +It is extremely rare for it to fail, unless the hardware is very old (or +very new). If it succeeds, it will start X automatically with the best +resolution possible depending on the size of the monitor. A window will +then appear and ask you if you can see it. -If you are doing an Expert install, you will enter the X configuration wizard. -See the corresponding section of the manual for more information about this -wizard. +If you are doing an \"Expert\" install, you will enter the X configuration +wizard. See the corresponding section of the manual for more information +about this wizard. -If you can see the message and answer Yes, then DrakX will proceed to the next -step. If you cannot see the message, it simply means that the configuration was -wrong and the test will automatically end after 10 seconds, restoring the -screen."), +If you can see the message and answer \"Yes\", then DrakX will proceed to +the next step. If you cannot see the message, it simply means that the +configuration was wrong and the test will automatically end after 10 +seconds, restoring the screen."), configureXmain => -__("The first time you try the X configuration, you may not be very satisfied with -its display (screen is too small, shifted left or right...). Hence, even if X -starts up correctly, DrakX then asks you if the configuration suits you. It will -also propose to change it by displaying a list of valid modes it could find, -asking you to select one. +__("The first time you try the X configuration, you may not be very satisfied +with its display (screen is too small, shifted left or right...). Hence, +even if X starts up correctly, DrakX then asks you if the configuration +suits you. It will also propose to change it by displaying a list of valid +modes it could find, asking you to select one. -As a last resort, if you still cannot get X to work, choose Change graphics -card, select Unlisted card, and when prompted on which server you want, choose -FBDev. This is a failsafe option which works with any modern graphics card. Then -choose Test again to be sure."), +As a last resort, if you still cannot get X to work, choose \"Change +graphics card\", select \"Unlisted card\", and when prompted on which +server you want, choose \"FBDev\". This is a failsafe option which works +with any modern graphics card. Then choose \"Test again\" to be sure."), configureXxdm => -__("Finally, you will be asked whether you want to see the graphical interface at -boot. Note this question will be asked even if you chose not to test the -configuration. Obviously, you want to answer No if your machine is to act as a -server, or if you were not successful in getting the display configured."), +__("Finally, you will be asked whether you want to see the graphical interface +at boot. Note this question will be asked even if you chose not to test the +configuration. Obviously, you want to answer \"No\" if your machine is to +act as a server, or if you were not successful in getting the display +configured."), createBootdisk => __("The Mandrake Linux CDROM has a built-in rescue mode. You can access it by -booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at the -prompt. But in case your computer cannot boot from the CDROM, you should come -back to this step for help in at least two situations: - - * when installing the boot loader, DrakX will rewrite the boot sector (MBR) of -your main disk (unless you are using another boot manager) so that you can start -up with either Windows or GNU/Linux (assuming you have Windows in your system). -If you need to reinstall Windows, the Microsoft install process will rewrite the -boot sector, and then you will not be able to start GNU/Linux! - - * if a problem arises and you cannot start up GNU/Linux from the hard disk, this -floppy disk will be the only means of starting up GNU/Linux. It contains a fair -number of system tools for restoring a system, which has crashed due to a power -failure, an unfortunate typing error, a typo in a password, or any other reason. - -When you click on this step, you will be asked to enter a disk inside the drive. -The floppy disk you will insert must be empty or contain data which you do not -need. You will not have to format it since DrakX will rewrite the whole disk."), +booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at +the prompt. But in case your computer cannot boot from the CDROM, you +should come back to this step for help in at least two situations: + + * when installing the boot loader, DrakX will rewrite the boot sector (MBR) +of your main disk (unless you are using another boot manager) so that you +can start up with either Windows or GNU/Linux (assuming you have Windows in +your system). If you need to reinstall Windows, the Microsoft install +process will rewrite the boot sector, and then you will not be able to +start GNU/Linux! + + * if a problem arises and you cannot start up GNU/Linux from the hard disk, +this floppy disk will be the only means of starting up GNU/Linux. It +contains a fair number of system tools for restoring a system, which has +crashed due to a power failure, an unfortunate typing error, a typo in a +password, or any other reason. + +When you click on this step, you will be asked to enter a disk inside the +drive. The floppy disk you will insert must be empty or contain data which +you do not need. You will not have to format it since DrakX will rewrite +the whole disk."), doPartitionDisks => __("At this point you need to choose where on your hard drive to install your -Mandrake Linux operating system. If your hard drive is empty or if an existing -operating system is using all the space available, you will need to partition -it. Basically, partitioning a hard drive consists of logically dividing it to -create space to install your new Mandrake Linux system. +Mandrake Linux operating system. If your hard drive is empty or if an +existing operating system is using all the space available, you will need +to partition it. Basically, partitioning a hard drive consists of logically +dividing it to create space to install your new Mandrake Linux system. Because the effects of the partitioning process are usually irreversible, -partitioning can be intimidating and stressful if you are an inexperienced user. -Fortunately, there is a wizard which simplifies this process. Before beginning, -please consult the manual and take your time. - -If you are running the install in Expert mode, you will enter DiskDrake, the -Mandrake Linux partitioning tool, which allows you to fine-tune your partitions. -See the DiskDrake chapter of the manual. From the installation interface, you -can use the wizards as described here by clicking the Wizard button of the -dialog. - -If partitions have already been defined, either from a previous installation or -from another partitioning tool, simply select those to install your Linux -system. - -If partitions are not defined, you will need to create them using the wizard. -Depending on your hard drive configuration, several options are available: - - * Use free space: this option will simply lead to an automatic partitioning of -your blank drive(s). You will not be prompted further. - - * Use existing partition: the wizard has detected one or more existing Linux -partitions on your hard drive. If you want to use them, choose this option. - - * Use the free space on the Windows partition: if Microsoft Windows is installed -on your hard drive and takes all the space available on it, you have to create -free space for Linux data. To do that, you can delete your Microsoft Windows -partition and data (see \"Erase entire disk\" or \"Expert mode\" solutions) or -resize your Microsoft Windows partition. Resizing can be performed without the -loss of any data. This solution is recommended if you want to use both Mandrake -Linux and Microsoft Windows on same computer. - - Before choosing this option, please understand that after this procedure, the -size of your Microsoft Windows partition will be smaller than at the present -time. You will have less free space under Microsoft Windows to store your data -or to install new software. - - * Erase entire disk: if you want to delete all data and all partitions present -on your hard drive and replace them with your new Mandrake Linux system, choose -this option. Be careful with this solution because you will not be able to -revert your choice after confirmation. +partitioning can be intimidating and stressful if you are an inexperienced +user. Fortunately, there is a wizard which simplifies this process. Before +beginning, please consult the manual and take your time. + +If you are running the install in Expert mode, you will enter DiskDrake, +the Mandrake Linux partitioning tool, which allows you to fine-tune your +partitions. See the DiskDrake chapter of the manual. From the installation +interface, you can use the wizards as described here by clicking the +\"Wizard\" button of the dialog. + +If partitions have already been defined, either from a previous +installation or from another partitioning tool, simply select those to +install your Linux system. + +If partitions are not defined, you will need to create them using the +wizard. Depending on your hard drive configuration, several options are +available: + + * \"Use free space\": this option will simply lead to an automatic +partitioning of your blank drive(s). You will not be prompted further. + + * \"Use existing partition\": the wizard has detected one or more existing +Linux partitions on your hard drive. If you want to use them, choose this +option. + + * \"Use the free space on the Windows partition\": if Microsoft Windows is +installed on your hard drive and takes all the space available on it, you +have to create free space for Linux data. To do that, you can delete your +Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert +mode\" solutions) or resize your Microsoft Windows partition. Resizing can +be performed without the loss of any data. This solution is recommended if +you want to use both Mandrake Linux and Microsoft Windows on same computer. + + Before choosing this option, please understand that after this procedure, +the size of your Microsoft Windows partition will be smaller than at the +present time. You will have less free space under Microsoft Windows to +store your data or to install new software. + + * \"Erase entire disk\": if you want to delete all data and all partitions +present on your hard drive and replace them with your new Mandrake Linux +system, choose this option. Be careful with this solution because you will +not be able to revert your choice after confirmation. !! If you choose this option, all data on your disk will be lost. !! - * Remove Windows: this will simply erase everything on the drive and begin -fresh, partitioning everything from scratch. All data on your disk will be lost. + * \"Remove Windows\": this will simply erase everything on the drive and +begin fresh, partitioning everything from scratch. All data on your disk +will be lost. !! If you choose this option, all data on your disk will be lost. !! - * Expert mode: choose this option if you want to manually partition your hard -drive. Be careful - it is a powerful but dangerous choice. You can very easily -lose all your data. Hence, do not choose this unless you know what you are -doing."), + * \"Expert mode\": choose this option if you want to manually partition +your hard drive. Be careful - it is a powerful but dangerous choice. You +can very easily lose all your data. Hence, do not choose this unless you +know what you are doing."), exitInstall => -__("There you are. Installation is now complete and your GNU/Linux system is ready -to use. Just click OK to reboot the system. You can start GNU/Linux or Windows, -whichever you prefer (if you are dual-booting), as soon as the computer has -booted up again. +__("There you are. Installation is now complete and your GNU/Linux system is +ready to use. Just click \"OK\" to reboot the system. You can start +GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as +soon as the computer has booted up again. -The Advanced button shows two more buttons to: +The \"Advanced\" button shows two more buttons to: - * generate auto-install floppy: to create an installation floppy disk which will -automatically perform a whole installation without the help of an operator, -similar to the installation you just configured. + * \"generate auto-install floppy\": to create an installation floppy disk +which will automatically perform a whole installation without the help of +an operator, similar to the installation you just configured. Note that two different options are available after clicking the button: - * Replay. This is a partially automated install as the partitioning step (and -only this one) remains interactive. + * \"Replay\". This is a partially automated install as the partitioning +step (and only this one) remains interactive. - * Automated. Fully automated install: the hard disk is completely rewritten, all -data is lost. + * \"Automated\". Fully automated install: the hard disk is completely +rewritten, all data is lost. - This feature is very handy when installing a great number of similar machines. -See the Auto install section at our web site. + This feature is very handy when installing a great number of similar +machines. See the Auto install section at our web site. - * Save packages selection(*): saves the packages selection as made previously. -Then, when doing another installation, insert the floppy inside the driver and -run the installation going to the help screen by pressing on the F1 key, and by -issuing >>linux defcfg=\"floppy\"<<. + * \"Save packages selection\"(*): saves the packages selection as made +previously. Then, when doing another installation, insert the floppy inside +the driver and run the installation going to the help screen by pressing on +the F1 key, and by issuing >>linux defcfg=\"floppy\"<<. (*) You need a FAT-formatted floppy (to create one under GNU/Linux, type \"mformat a:\")"), @@ -333,47 +347,50 @@ formatPartitions => __("Any partitions that have been newly defined must be formatted for use (formatting means creating a file system). -At this time, you may wish to reformat some already existing partitions to erase -any data they contain. If you wish to do that, please select those partitions as -well. +At this time, you may wish to reformat some already existing partitions to +erase any data they contain. If you wish to do that, please select those +partitions as well. -Please note that it is not necessary to reformat all pre-existing partitions. -You must reformat the partitions containing the operating system (such as /, -/usr or /var) but you do not have to reformat partitions containing data that -you wish to keep (typically /home). +Please note that it is not necessary to reformat all pre-existing +partitions. You must reformat the partitions containing the operating +system (such as \"/\", \"/usr\" or \"/var\") but you do not have to +reformat partitions containing data that you wish to keep (typically +\"/home\"). -Please be careful when selecting partitions. After formatting, all data on the -selected partitions will be deleted and you will not be able to recover any of -them. +Please be careful when selecting partitions. After formatting, all data on +the selected partitions will be deleted and you will not be able to recover +any of them. -Click on OK when you are ready to format partitions. +Click on \"OK\" when you are ready to format partitions. -Click on Cancel if you want to choose another partition for your new Mandrake -Linux operating system installation. +Click on \"Cancel\" if you want to choose another partition for your new +Mandrake Linux operating system installation. -Click on Advanced if you wish to select partitions that will be checked for bad -blocks on the disc."), +Click on \"Advanced\" if you wish to select partitions that will be checked +for bad blocks on the disc."), installPackages => -__("Your new Mandrake Linux operating system is currently being installed. Depending -on the number of packages you will be installing and the speed of your computer, -this operation could take from a few minutes to a significant amount of time. +__("Your new Mandrake Linux operating system is currently being installed. +Depending on the number of packages you will be installing and the speed of +your computer, this operation could take from a few minutes to a +significant amount of time. Please be patient."), license => -__("Before continuing you should read carefully the terms of the license. It covers -the whole Mandrake Linux distribution, and if you do not agree with all the -terms in it, click on the Refuse button which will immediately terminate the -installation. To continue with the installation, click the Accept button."), +__("Before continuing you should read carefully the terms of the license. It +covers the whole Mandrake Linux distribution, and if you do not agree with +all the terms in it, click on the \"Refuse\" button which will immediately +terminate the installation. To continue with the installation, click the +\"Accept\" button."), miscellaneous => -__("At this point, it is time to choose the security level desired for the machine. -As a rule of thumb, the more exposed the machine is, and the more the data -stored in it is crucial, the higher the security level should be. However, a -higher security level is generally obtained at the expenses of easiness of use. -Refer to the MSEC chapter of the ``Reference Manual'' to get more information -about the meaning of these levels. +__("At this point, it is time to choose the security level desired for the +machine. As a rule of thumb, the more exposed the machine is, and the more +the data stored in it is crucial, the higher the security level should be. +However, a higher security level is generally obtained at the expenses of +easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to +get more information about the meaning of these levels. If you do not know what to choose, keep the default option."), @@ -384,59 +401,62 @@ defined, either from a previous installation of GNU/Linux or from another partitioning tool, you can use existing partitions. Otherwise hard drive partitions must be defined. -To create partitions, you must first select a hard drive. You can select the -disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb\" -for the second, \"sda\" for the first SCSI drive and so on. +To create partitions, you must first select a hard drive. You can select +the disk for partitioning by clicking on \"hda\" for the first IDE drive, +\"hdb\" for the second, \"sda\" for the first SCSI drive and so on. To partition the selected hard drive, you can use these options: - * Clear all: this option deletes all partitions on the selected hard drive. + * \"Clear all\": this option deletes all partitions on the selected hard +drive. - * Auto allocate: this option allows you to automatically create Ext2 and swap -partitions in free space of your hard drive. + * \"Auto allocate\": this option allows you to automatically create Ext2 +and swap partitions in free space of your hard drive. - * Rescue partition table: if your partition table is damaged, you can try to -recover it using this option. Please be careful and remember that it can fail. + * \"Rescue partition table\": if your partition table is damaged, you can +try to recover it using this option. Please be careful and remember that it +can fail. - * Undo: use this option to cancel your changes. + * \"Undo\": use this option to cancel your changes. - * Reload: you can use this option if you wish to undo all changes and load your -initial partitions table. + * \"Reload\": you can use this option if you wish to undo all changes and +load your initial partitions table. - * Wizard: use this option if you wish to use a wizard to partition your hard -drive. This is recommended if you do not have a good knowledge of partitioning. + * \"Wizard\": use this option if you wish to use a wizard to partition your +hard drive. This is recommended if you do not have a good knowledge of +partitioning. - * Restore from floppy: this option will allow you to restore a previously saved -partition table from floppy disk. + * \"Restore from floppy\": this option will allow you to restore a +previously saved partition table from floppy disk. - * Save to floppy: saves the partition table to a floppy. Useful for later -partition-table recovery if necessary. It is strongly recommended to perform -this step. + * \"Save to floppy\": saves the partition table to a floppy. Useful for +later partition-table recovery if necessary. It is strongly recommended to +perform this step. - * Done: when you have finished partitioning your hard drive, this will save your -changes back to disc. + * \"Done\": when you have finished partitioning your hard drive, this will +save your changes back to disc. Note: you can reach any option using the keyboard. Navigate through the partitions using Tab and Up/Down arrows. When a partition is selected, you can use: - * (*)(*) to create a new partition (when an empty partition is selected); + * Ctrl-c to create a new partition (when an empty partition is selected); - * (*)(*) to delete a partition; + * Ctrl-d to delete a partition; - * (*)(*) to set the mount point. + * Ctrl-m to set the mount point. If you are installing on a PPC machine, you will want to create a small HFS -\"bootstrap\" partition of at least 1MB which will be used by the yaboot boot -loader. If you opt to make the partition a bit larger, say 50MB, you may find it -a useful place to store a spare kernel and ramdisk images for emergency boot -situations."), +\"bootstrap\" partition of at least 1MB which will be used by the yaboot +boot loader. If you opt to make the partition a bit larger, say 50MB, you +may find it a useful place to store a spare kernel and ramdisk images for +emergency boot situations."), resizeFATChoose => -__("More than one Microsoft Windows partition has been detected on your hard drive. -Please choose the one you want resize in order to install your new Mandrake -Linux operating system. +__("More than one Microsoft Windows partition has been detected on your hard +drive. Please choose the one you want resize in order to install your new +Mandrake Linux operating system. Each partition is listed as follows: \"Linux name\", \"Windows name\" \"Capacity\". @@ -444,11 +464,11 @@ Each partition is listed as follows: \"Linux name\", \"Windows name\" \"Linux name\" is structured: \"hard drive type\", \"hard drive number\", \"partition number\" (for example, \"hda1\"). -\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd\" -if it is a SCSI hard drive. +\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and +\"sd\" if it is a SCSI hard drive. -\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE hard -drives: +\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE +hard drives: * \"a\" means \"master hard drive on the primary IDE controller\", @@ -458,232 +478,241 @@ drives: * \"d\" means \"slave hard drive on the secondary IDE controller\". -With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means \"second -lowest SCSI ID\", etc. +With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means +\"second lowest SCSI ID\", etc. -\"Windows name\" is the letter of your hard drive under Windows (the first disk -or partition is called \"C:\")."), +\"Windows name\" is the letter of your hard drive under Windows (the first +disk or partition is called \"C:\")."), resizeFATWait => __("Please be patient. This operation can take several minutes."), selectInstallClass => -__("DrakX now needs to know if you want to perform a default (Recommended) -installation or if you want to have greater control (Expert). You also have the -choice of performing a new install or an upgrade of an existing Mandrake Linux -system. Clicking Install will completely wipe out the old system. Select Upgrade -if you are upgrading or repairing an existing system. +__("DrakX now needs to know if you want to perform a default (\"Recommended\") +installation or if you want to have greater control (\"Expert\"). You also +have the choice of performing a new install or an upgrade of an existing +Mandrake Linux system. Clicking \"Install\" will completely wipe out the +old system. Select \"Upgrade\" if you are upgrading or repairing an +existing system. -Please choose Install if there are no previous version of Mandrake Linux -installed or if you wish to boot between various operating systems. +Please choose \"Install\" if there are no previous version of Mandrake +Linux installed or if you wish to boot between various operating systems. -Please choose Update if you wish to update or repair an already installed -version of Mandrake Linux. +Please choose \"Update\" if you wish to update or repair an already +installed version of Mandrake Linux. -Depending on your knowledge of GNU/Linux, please choose one of the following to -install or update your Mandrake Linux operating system: +Depending on your knowledge of GNU/Linux, please choose one of the +following to install or update your Mandrake Linux operating system: - * Recommended: choose this if you have never installed a GNU/Linux operating -system. The installation will be very easy and you will only be asked a few -questions. + * Recommended: choose this if you have never installed a GNU/Linux +operating system. The installation will be very easy and you will only be +asked a few questions. * Expert: if you have a good knowledge of GNU/Linux, you can choose this -installation class. The expert installation will allow you to perform a highly -customized installation. Answering some of the questions can be difficult if you -do not have a good knowledge of GNU/Linux so do not choose this unless you know -what you are doing."), +installation class. The expert installation will allow you to perform a +highly customized installation. Answering some of the questions can be +difficult if you do not have a good knowledge of GNU/Linux so do not choose +this unless you know what you are doing."), selectKeyboard => -__("Normally, DrakX selects the right keyboard for you (depending on the language -you have chosen) and you will not even see this step. However, you might not -have a keyboard that corresponds exactly to your language: for example, if you -are an English speaking Swiss person, you may still want your keyboard to be a -Swiss keyboard. Or if you speak English but are located in Quebec, you may find -yourself in the same situation. In both cases, you will have to go back to this -installation step and select an appropriate keyboard from the list. - -Click on the More button to be presented with the complete list of supported -keyboards."), +__("Normally, DrakX selects the right keyboard for you (depending on the +language you have chosen) and you will not even see this step. However, you +might not have a keyboard that corresponds exactly to your language: for +example, if you are an English speaking Swiss person, you may still want +your keyboard to be a Swiss keyboard. Or if you speak English but are +located in Quebec, you may find yourself in the same situation. In both +cases, you will have to go back to this installation step and select an +appropriate keyboard from the list. + +Click on the \"More\" button to be presented with the complete list of +supported keyboards."), selectLanguage => __("Please choose your preferred language for installation and system usage. -Clicking on the Advanced button will allow you to select other languages to be -installed on your workstation. Selecting other languages will install the -language-specific files for system documentation and applications. For example, -if you will host users from Spain on your machine, select English as the main -language in the tree view and in the Advanced section click on the grey star -corresponding to Spanish|Spain. +Clicking on the \"Advanced\" button will allow you to select other +languages to be installed on your workstation. Selecting other languages +will install the language-specific files for system documentation and +applications. For example, if you will host users from Spain on your +machine, select English as the main language in the tree view and in the +Advanced section click on the grey star corresponding to \"Spanish|Spain\". Note that multiple languages may be installed. Once you have selected any -additional locales click the OK button to continue."), +additional locales click the \"OK\" button to continue."), selectMouse => -__("By default, DrakX assumes you have a two-button mouse and will set it up for -third-button emulation. DrakX will automatically know whether it is a PS/2, -serial or USB mouse. +__("By default, DrakX assumes you have a two-button mouse and will set it up +for third-button emulation. DrakX will automatically know whether it is a +PS/2, serial or USB mouse. -If you wish to specify a different type of mouse select the appropriate type -from the list provided. +If you wish to specify a different type of mouse select the appropriate +type from the list provided. -If you choose a mouse other than the default you will be presented with a mouse -test screen. Use the buttons and wheel to verify that the settings are good. If -the mouse is not working correctly press the space bar or RETURN to \"Cancel\" -and choose again."), +If you choose a mouse other than the default you will be presented with a +mouse test screen. Use the buttons and wheel to verify that the settings +are good. If the mouse is not working correctly press the space bar or +RETURN to \"Cancel\" and choose again."), selectSerialPort => -__("Please select the correct port. For example, the COM1 port under MS Windows is -named ttyS0 under GNU/Linux."), +__("Please select the correct port. For example, the COM1 port under MS Windows +is named ttyS0 under GNU/Linux."), setRootPassword => __("This is the most crucial decision point for the security of your GNU/Linux -system: you have to enter the root password. root is the system administrator -and is the only one authorized to make updates, add users, change the overall -system configuration, and so on. In short, root can do everything! That is why -you must choose a password that is difficult to guess - DrakX will tell you if -it is too easy. As you can see, you can choose not to enter a password, but we -strongly advise you against this if only for one reason: do not think that -because you booted GNU/Linux that your other operating systems are safe from -mistakes. Since root can overcome all limitations and unintentionally erase all -data on partitions by carelessly accessing the partitions themselves, it is -important for it to be difficult to become root. +system: you have to enter the \"root\" password. \"root\" is the system +administrator and is the only one authorized to make updates, add users, +change the overall system configuration, and so on. In short, \"root\" can +do everything! That is why you must choose a password that is difficult to +guess - DrakX will tell you if it is too easy. As you can see, you can +choose not to enter a password, but we strongly advise you against this if +only for one reason: do not think that because you booted GNU/Linux that +your other operating systems are safe from mistakes. Since \"root\" can +overcome all limitations and unintentionally erase all data on partitions +by carelessly accessing the partitions themselves, it is important for it +to be difficult to become \"root\". The password should be a mixture of alphanumeric characters and at least 8 -characters long. Never write down the root password - it makes it too easy to -compromise a system. +characters long. Never write down the \"root\" password - it makes it too +easy to compromise a system. -However, please do not make the password too long or complicated because you -must be able to remember it without too much effort. +However, please do not make the password too long or complicated because +you must be able to remember it without too much effort. -The password will not be displayed on screen as you type it in. Hence, you will -have to type the password twice to reduce the chance of a typing error. If you -do happen to make the same typing error twice, this \"incorrect\" password will -have to be used the first time you connect. +The password will not be displayed on screen as you type it in. Hence, you +will have to type the password twice to reduce the chance of a typing +error. If you do happen to make the same typing error twice, this +\"incorrect\" password will have to be used the first time you connect. -In expert mode, you will be asked if you will be connecting to an authentication -server, like NIS or LDAP. +In expert mode, you will be asked if you will be connecting to an +authentication server, like NIS or LDAP. -If your network uses LDAP (or NIS) protocol for authentication, select LDAP (or -NIS) as authentication. If you do not know, ask your network administrator. +If your network uses LDAP (or NIS) protocol for authentication, select +\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your +network administrator. -If your computer is not connected to any administrated network, you will want to -choose Local files for authentication."), +If your computer is not connected to any administrated network, you will +want to choose \"Local files\" for authentication."), setupBootloader => -__("Unless you know specifically otherwise, the usual choice is /dev/hda (primary -master IDE disk) or /dev/sda (first SCSI disk)."), +__("Unless you know specifically otherwise, the usual choice is \"/dev/hda\" +(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."), setupBootloaderAddEntry => -__("LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot either -GNU/Linux or any other operating system present on your computer. Normally, -these other operating systems are correctly detected and installed. If this is -not the case, you can add an entry by hand in this screen. Be careful to choose -the correct parameters. +__("LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot +either GNU/Linux or any other operating system present on your computer. +Normally, these other operating systems are correctly detected and +installed. If this is not the case, you can add an entry by hand in this +screen. Be careful to choose the correct parameters. -You may also not want to give access to these other operating systems to anyone. -In which case, you can delete the corresponding entries. But then, you will need -a boot disk in order to boot those other operating systems!"), +You may also not want to give access to these other operating systems to +anyone. In which case, you can delete the corresponding entries. But then, +you will need a boot disk in order to boot those other operating systems!"), setupBootloaderBeginner => -__("You must indicate where you wish to place the information required to boot to -GNU/Linux. +__("You must indicate where you wish to place the information required to boot +to GNU/Linux. -Unless you know exactly what you are doing, choose First sector of drive (MBR)."), +Unless you know exactly what you are doing, choose \"First sector of drive +(MBR)\"."), setupSCSI => -__("DrakX is now detecting any IDE devices present in your computer. It will also -scan for one or more PCI SCSI card(s) on your system. If a SCSI card is found -DrakX will automatically install the appropriate driver. - -Because hardware detection will sometimes not detect a piece of hardware DrakX -will ask you to confirm if a PCI SCSI card is present. Click Yes if you know -that there is a SCSI card installed in your machine. You will be presented a -list of SCSI cards to choose from. Click No if you have no SCSI hardware. If you -are unsure you can check the list of hardware detected in your machine by -selecting See hardware info and clicking OK. Examine the list of hardware and -then click on the OK button to return to the SCSI interface question. +__("DrakX is now detecting any IDE devices present in your computer. It will +also scan for one or more PCI SCSI card(s) on your system. If a SCSI card +is found DrakX will automatically install the appropriate driver. + +Because hardware detection will sometimes not detect a piece of hardware +DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\" +if you know that there is a SCSI card installed in your machine. You will +be presented a list of SCSI cards to choose from. Click \"No\" if you have +no SCSI hardware. If you are unsure you can check the list of hardware +detected in your machine by selecting \"See hardware info\" and clicking +\"OK\". Examine the list of hardware and then click on the \"OK\" button to +return to the SCSI interface question. If you have to manually specify your adapter, DrakX will ask if you want to -specify options for it. You should allow DrakX to probe the hardware for the -card-specific options that the hardware needs to initialize. This usually works -well. - -If DrakX is not able to probe for the options that need to be passed, you will -need to manually provide options to the driver. Please review the ``User Guide'' -(chapter 3, section \"Collecting information on your hardware\") for hints on -retrieving the parameters required from hardware documentation, from the -manufacturer's web site (if you have Internet access) or from Microsoft Windows -(if you used this hardware with Windows on your system)."), +specify options for it. You should allow DrakX to probe the hardware for +the card-specific options that the hardware needs to initialize. This +usually works well. + +If DrakX is not able to probe for the options that need to be passed, you +will need to manually provide options to the driver. Please review the +``User Guide'' (chapter 3, section \"Collecting information on your +hardware\") for hints on retrieving the parameters required from hardware +documentation, from the manufacturer's web site (if you have Internet +access) or from Microsoft Windows (if you used this hardware with Windows +on your system)."), setupYabootAddEntry => -__("You can add additional entries for yaboot, either for other operating systems, -alternate kernels, or for an emergency boot image. +__("You can add additional entries for yaboot, either for other operating +systems, alternate kernels, or for an emergency boot image. For other OS's, the entry consists only of a label and the root partition. For Linux, there are a few possible options: - * Label: this is simply the name you will have to type at the yaboot prompt to -select this boot option. + * Label: this is simply the name you will have to type at the yaboot prompt +to select this boot option. - * Image: this would be the name of the kernel to boot. Typically, vmlinux or a -variation of vmlinux with an extension. + * Image: this would be the name of the kernel to boot. Typically, vmlinux +or a variation of vmlinux with an extension. - * Root: the root device or \"/\" for your Linux installation. + * Root: the \"root\" device or \"/\" for your Linux installation. - * Append: on Apple hardware, the kernel append option is used quite often to -assist in initializing video hardware, or to enable keyboard mouse button -emulation for the often lacking 2nd and 3rd mouse buttons on a stock Apple -mouse. The following are some examples: + * Append: on Apple hardware, the kernel append option is used quite often +to assist in initializing video hardware, or to enable keyboard mouse +button emulation for the often lacking 2nd and 3rd mouse buttons on a stock +Apple mouse. The following are some examples: video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 - * Initrd: this option can be used either to load initial modules, before the -boot device is available, or to load a ramdisk image for an emergency boot -situation. + * Initrd: this option can be used either to load initial modules, before +the boot device is available, or to load a ramdisk image for an emergency +boot situation. - * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you need to -allocate a large ramdisk, this option can be used. + * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you +need to allocate a large ramdisk, this option can be used. - * Read-write: normally the root partition is initially brought up in read-only, -to allow a file system check before the system becomes \"live\". Here, you can -override this option. + * Read-write: normally the \"root\" partition is initially brought up in +read-only, to allow a file system check before the system becomes \"live\". +Here, you can override this option. * NoVideo: should the Apple video hardware prove to be exceptionally -problematic, you can select this option to boot in \"novideo\" mode, with native -frame buffer support. +problematic, you can select this option to boot in \"novideo\" mode, with +native frame buffer support. - * Default: selects this entry as being the default Linux selection, selectable -by just pressing ENTER at the yaboot prompt. This entry will also be highlighted -with a \"*\", if you press Tab to see the boot selections."), + * Default: selects this entry as being the default Linux selection, +selectable by just pressing ENTER at the yaboot prompt. This entry will +also be highlighted with a \"*\", if you press Tab to see the boot +selections."), setupYabootGeneral => __("Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot -either GNU/Linux, MacOS or MacOSX if present on your computer. Normally, these -other operating systems are correctly detected and installed. If this is not the -case, you can add an entry by hand in this screen. Be careful as to choose the -correct parameters. +either GNU/Linux, MacOS or MacOSX if present on your computer. Normally, +these other operating systems are correctly detected and installed. If this +is not the case, you can add an entry by hand in this screen. Be careful as +to choose the correct parameters. Yaboot's main options are: - * Init Message: a simple text message that is displayed before the boot prompt. + * Init Message: a simple text message that is displayed before the boot +prompt. - * Boot Device: indicate where you want to place the information required to boot -to GNU/Linux. Generally, you setup a bootstrap partition earlier to hold this -information. + * Boot Device: indicate where you want to place the information required to +boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to +hold this information. - * Open Firmware Delay: unlike LILO, there are two delays available with yaboot. -The first delay is measured in seconds and at this point, you can choose between -CD, OF boot, MacOS or Linux. + * Open Firmware Delay: unlike LILO, there are two delays available with +yaboot. The first delay is measured in seconds and at this point, you can +choose between CD, OF boot, MacOS or Linux. - * Kernel Boot Timeout: this timeout is similar to the LILO boot delay. After -selecting Linux, you will have this delay in 0.1 second before your default -kernel description is selected. + * Kernel Boot Timeout: this timeout is similar to the LILO boot delay. +After selecting Linux, you will have this delay in 0.1 second before your +default kernel description is selected. - * Enable CD Boot?: checking this option allows you to choose \"C\" for CD at the -first boot prompt. + * Enable CD Boot?: checking this option allows you to choose \"C\" for CD +at the first boot prompt. * Enable OF Boot?: checking this option allows you to choose \"N\" for Open Firmware at the first boot prompt. @@ -692,32 +721,33 @@ Firmware at the first boot prompt. Firmware Delay expires."), summary => -__("Here are presented various parameters concerning your machine. Depending on your -installed hardware, you may - or not, see the following entries: +__("Here are presented various parameters concerning your machine. Depending on +your installed hardware, you may - or not, see the following entries: - * Mouse: mouse check the current mouse configuration and click on the button to -change it if necessary. + * \"Mouse\": mouse check the current mouse configuration and click on the +button to change it if necessary. - * Keyboard: keyboard check the current keyboard map configuration and click on -the button to change that if necessary. + * \"Keyboard\": keyboard check the current keyboard map configuration and +click on the button to change that if necessary. - * Timezone: time zoneDrakX, by default, guesses your time zone from the language -you have chosen. But here again, as for the choice of a keyboard, you may not be -in the country for which the chosen language should correspond. Hence, you may -need to click on the Timezone button in order to configure the clock according -to the time zone you are in. + * \"Timezone\": time zoneDrakX, by default, guesses your time zone from the +language you have chosen. But here again, as for the choice of a keyboard, +you may not be in the country for which the chosen language should +correspond. Hence, you may need to click on the \"Timezone\" button in +order to configure the clock according to the time zone you are in. - * Printer: clicking on the No Printer button will open the printer configuration -wizard. + * \"Printer\": clicking on the \"No Printer\" button will open the printer +configuration wizard. - * Sound card: if a sound card is detected on your system, it is displayed here. -No modification possible at installation time. + * \"Sound card\": if a sound card is detected on your system, it is +displayed here. No modification possible at installation time. - * TV card: if a TV card is detected on your system, it is displayed here. No -modification possible at installation time. + * \"TV card\": if a TV card is detected on your system, it is displayed +here. No modification possible at installation time. - * ISDN card: if an ISDN card is detected on your system, it is displayed here. -You can click on the button to change the parameters associated to it."), + * \"ISDN card\": if an ISDN card is detected on your system, it is +displayed here. You can click on the button to change the parameters +associated to it."), takeOverHdChoose => __("Choose the hard drive you want to erase to install your new Mandrake Linux @@ -725,10 +755,11 @@ partition. Be careful, all data present on it will be lost and will not be recoverable!"), takeOverHdConfirm => -__("Click on OK if you want to delete all data and partitions present on this hard -drive. Be careful, after clicking on OK, you will not be able to recover any -data and partitions present on this hard drive, including any Windows data. +__("Click on \"OK\" if you want to delete all data and partitions present on +this hard drive. Be careful, after clicking on \"OK\", you will not be able +to recover any data and partitions present on this hard drive, including +any Windows data. -Click on Cancel to cancel this operation without losing any data and partitions -present on this hard drive."), +Click on \"Cancel\" to cancel this operation without losing any data and +partitions present on this hard drive."), ); |