summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
authorFrancois Pons <fpons@mandriva.com>2000-09-12 17:34:11 +0000
committerFrancois Pons <fpons@mandriva.com>2000-09-12 17:34:11 +0000
commitcfd3a63ff8004529be3ac548290d216cb4fee460 (patch)
tree56a74925d6d95f02bda5f1fb5763c7f4b790d393 /perl-install
parent316bf13b64e331d42583e3e4cd80f96e29f34a0a (diff)
downloaddrakx-backup-do-not-use-cfd3a63ff8004529be3ac548290d216cb4fee460.tar
drakx-backup-do-not-use-cfd3a63ff8004529be3ac548290d216cb4fee460.tar.gz
drakx-backup-do-not-use-cfd3a63ff8004529be3ac548290d216cb4fee460.tar.bz2
drakx-backup-do-not-use-cfd3a63ff8004529be3ac548290d216cb4fee460.tar.xz
drakx-backup-do-not-use-cfd3a63ff8004529be3ac548290d216cb4fee460.zip
*** empty log message ***
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/install_steps.pm2
-rw-r--r--perl-install/install_steps_interactive.pm6
-rw-r--r--perl-install/printer.pm24
-rw-r--r--perl-install/printerdrake.pm22
4 files changed, 28 insertions, 26 deletions
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index 573619048..9de509b72 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -687,7 +687,7 @@ sub setupBootloaderBefore {
require bootloader;
#- propose the default fb mode for kernel fb, if aurora is installed too.
bootloader::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion($o),
- pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'Aurora') || {}) && 785);
+ pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'Aurora') || {}) && ($o->{vga} || 785));
if ($o->{miscellaneous}{profiles}) {
my $e = bootloader::get_label("linux", $o->{bootloader});
push @{$o->{bootloader}{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 995ba0dae..7954d31cf 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -578,10 +578,10 @@ sub configurePrinter {
#- figure out what printing system to use, currently are suported cups and lpr,
#- in case this has not be detected above.
- $::beginner and $o->{printer}{mode} ||= 'cups';
+ $::beginner and $o->{printer}{mode} ||= 'CUPS';
if ($::expert || !$o->{printer}{mode}) {
- $o->{printer}{mode} = $o->ask_from_list_([''], _("What printing system do you want to use?"),
- [ 'cups', 'lpr', __("Cancel") ],
+ $o->{printer}{mode} = $o->ask_from_list_([''], _("Which printing system do you want to use?"),
+ [ 'CUPS', 'lpr', __("Cancel") ],
);
$o->{printer}{want} = $o->{printer}{mode} ne 'Cancel';
$o->{printer}{want} or $o->{printer}{mode} = undef, return;
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
index f524c33cd..f1f937ebe 100644
--- a/perl-install/printer.pm
+++ b/perl-install/printer.pm
@@ -18,7 +18,7 @@ my $PRINTER_FILTER_DIR = "/usr/lib/rhs/rhs-printfilters";
%printer_type = (
__("Local printer") => "LOCAL",
__("Remote printer") => "REMOTE",
- __("Remote cups server") => "CUPS",
+ __("Remote CUPS server") => "CUPS",
__("Remote lpd server") => "LPD",
__("Network printer (socket)") => "SOCKET",
__("SMB/Windows 95/98/NT") => "SMB",
@@ -46,7 +46,7 @@ sub default_spooldir($) { "/var/spool/lpd/" . default_queue($_[0]) }
sub default_printer_type($) { "LOCAL" }
sub printer_type($) {
for ($_[0]{mode}) {
- /cups/ && return @printer_type_inv{qw(LOCAL REMOTE SMB), $::expert ? qw(URI) : ()};
+ /CUPS/ && return @printer_type_inv{qw(LOCAL REMOTE SMB), $::expert ? qw(URI) : ()};
/lpr/ && return @printer_type_inv{qw(LOCAL LPD SMB NCP)};
}
}
@@ -323,7 +323,7 @@ sub read_printers_conf {
foreach (<PRINTERS>) {
chomp;
/^\s*#/ and next;
- if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
+ if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'CUPS', QUEUE => $1, } }
elsif (/\s*<\/Printer>/) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
@@ -331,7 +331,7 @@ sub read_printers_conf {
close PRINTERS;
#- assume this printing system.
- $printer->{mode} ||= 'cups';
+ $printer->{mode} ||= 'CUPS';
}
sub get_direct_uri {
@@ -349,7 +349,8 @@ sub get_descr_from_ppd {
my ($printer) = @_;
my %ppd;
- local *F; open F, "$prefix/etc/cups/ppd/$printer->{QUEUE}.ppd" or return;
+ #- if there is no ppd, this means this is the PostScript generic filter.
+ local *F; open F, "$prefix/etc/cups/ppd/$printer->{QUEUE}.ppd" or return "PostScript";
foreach (<F>) {
/^\*([^\s:]*)\s*:\s*\"([^\"]*)\"/ and do { $ppd{$1} = $2; next };
/^\*([^\s:]*)\s*:\s*([^\s\"]*)/ and do { $ppd{$1} = $2; next };
@@ -381,6 +382,9 @@ sub poll_ppd_base {
}
scalar(keys %descr_to_ppd) > 5 or die "unable to connect to cups server";
+
+ #- assume a default printer not using any ppd at all.
+ $descr_to_ppd{"PostScript"} = '';
}
#-******************************************************************************
@@ -449,7 +453,7 @@ sub configure_queue($) {
my ($entry) = @_;
for ($entry->{mode}) {
- /cups/ && do {
+ /CUPS/ && do {
#- at this level, we are using lpadmin to create a local printer (only local
#- printer are supported with printerdrake).
require run_program;
@@ -457,7 +461,7 @@ sub configure_queue($) {
"-p", $entry->{QUEUE},
$entry->{State} eq 'Idle' && $entry->{Accepting} eq 'Yes' ? ("-E") : (),
"-v", $entry->{DeviceURI},
- "-m", $entry->{cupsPPD},
+ $entry->{cupsPPD} ? ("-m", $entry->{cupsPPD}) : (),
$entry->{Info} ? ("-D", $entry->{Info}) : (),
$entry->{Location} ? ("-L", $entry->{Location}) : (),
);
@@ -596,7 +600,7 @@ sub remove_queue($) {
my ($printer) = @_;
$printer->{configured}{$printer->{QUEUE}} or return; #- something strange at this point.
- if ($printer->{mode} eq 'cups') {
+ if ($printer->{mode} eq 'CUPS') {
require run_program;
run_program::rooted($prefix, "lpadmin", "-x", $printer->{QUEUE});
}
@@ -608,7 +612,7 @@ sub restart_queue($) {
my $queue = default_queue($printer);
for ($printer->{mode}) {
- /cups/ && do {
+ /CUPS/ && do {
#- restart cups before cleaning the queue.
require run_program;
run_program::rooted($prefix, "/etc/rc.d/init.d/cups start"); sleep 1;
@@ -634,7 +638,7 @@ sub print_pages($@) {
my ($lpr, $lpq);
for ($printer->{mode}) {
- /cups/ and ($lpr, $lpq) = ("/usr/bin/lpr-cups", "/usr/bin/lpq-cups");
+ /CUPS/ and ($lpr, $lpq) = ("/usr/bin/lpr-cups", "/usr/bin/lpq-cups");
/lpr/ and ($lpr, $lpq) = ("/usr/bin/lpq-lpd", "/usr/bin/lpq-lpd");
}
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
index b53285957..c5eafacd6 100644
--- a/perl-install/printerdrake.pm
+++ b/perl-install/printerdrake.pm
@@ -37,7 +37,6 @@ sub setup_local($$$) {
}
if (@str) {
@port = map { $_->{port} } grep { $_->{val}{DESCRIPTION} } @parport;
- #- in such case for a beginner, do not ask the port, get the first one.
!$::expert && @port > 0 and $in = undef;
} else {
@port = detect_devices::whatPrinterPort();
@@ -45,7 +44,7 @@ sub setup_local($$$) {
$printer->{DEVICE} = $port[0] if $port[0];
$in and return if !$in->ask_from_entries_refH(_("Local Printer Device"),
- _("What device is your printer connected to
+_("What device is your printer connected to
(note that /dev/lp0 is equivalent to LPT1:)?\n") . (join "\n", @str), [
_("Printer Device") => {val => \$printer->{DEVICE}, list => \@port } ],
);
@@ -65,7 +64,7 @@ _("Printer Device") => {val => \$printer->{DEVICE}, list => \@port } ],
sub setup_remote($$$) {
my ($printer, $in, $install) = @_;
- $in->ask_from_entries_refH(_("Remote lpd Printer Options"),
+ return if !$in->ask_from_entries_refH(_("Remote lpd Printer Options"),
_("To use a remote lpd print queue, you need to supply
the hostname of the printer server and the queue name
on that server which jobs should be placed in."), [
@@ -79,8 +78,7 @@ _("Remote queue") => \$printer->{REMOTEQUEUE}, ],
sub setup_smb($$$) {
my ($printer, $in, $install) = @_;
- return if !$in->ask_from_entries_refH(
- _("SMB (Windows 9x/NT) Printer Options"),
+ return if !$in->ask_from_entries_refH(_("SMB (Windows 9x/NT) Printer Options"),
_("To print to a SMB printer, you need to provide the
SMB host name (Note! It may be different from its
TCP/IP hostname!) and possibly the IP address of the print server, as
@@ -109,7 +107,7 @@ _("Workgroup") => \$printer->{SMBWORKGROUP} ],
"/$printer->{SMBSHARE}");
&$install('samba');
- $printer->{mode} eq 'cups' and printer::restart_queue($printer);
+ $printer->{mode} eq 'CUPS' and printer::restart_queue($printer);
1;
}
@@ -171,7 +169,7 @@ _("Printer Device URI") => { val => \$printer->{DeviceURI}, list => [ printer::g
sub setup_gsdriver($$$;$) {
my ($printer, $in, $install, $upNetwork) = @_;
for ($printer->{mode}) {
- /cups/ && return setup_gsdriver_cups($printer, $in, $install, $upNetwork);
+ /CUPS/ && return setup_gsdriver_cups($printer, $in, $install, $upNetwork);
/lpr/ && return setup_gsdriver_lpr($printer, $in, $install, $upNetwork);
die "mode not chosen to configure a printer";
}
@@ -183,7 +181,6 @@ sub setup_gsdriver_cups($$$;$) {
while (1) {
$printer->{cupsDescr} ||= printer::get_descr_from_ppd($printer);
- print ">> $printer->{cupsDescr}\n";
$printer->{cupsDescr} = $in->ask_from_treelist('', _("What type of printer do you have?"), '|',
[ keys %printer::descr_to_ppd ], $printer->{cupsDescr}) or return;
$printer->{cupsPPD} = $printer::descr_to_ppd{$printer->{cupsDescr}};
@@ -361,7 +358,7 @@ You can add some more or change the existing ones."),
#- switch according to what is being installed: cups, lpr or other.
for ($printer->{mode}) {
- /cups/ && do { &$install('cups-drivers') unless $::testing;
+ /CUPS/ && do { &$install('cups-drivers') unless $::testing;
printer::poll_ppd_base(); last };
/lpr/ && do { &$install('rhs-printfilters') unless $::testing;
printer::read_printer_db(); last };
@@ -373,7 +370,7 @@ You can add some more or change the existing ones."),
while ($continue) {
$printer::printer_type_inv{$printer->{TYPE}} or $printer->{TYPE} = printer::default_printer_type($printer);
$printer->{str_type} = $printer::printer_type_inv{$printer->{TYPE}};
- if ($printer->{mode} eq 'cups') {
+ if ($printer->{mode} eq 'CUPS') {
$printer->{str_type} = $in->ask_from_list_(_("Select Printer Connection"),
_("How is the printer connected?"),
[ printer::printer_type($printer) ],
@@ -385,14 +382,15 @@ You can add some more or change the existing ones."),
$printer->{str_type} = $in->ask_from_list_(_("Select Remote Printer Connection"),
_("With a remote CUPS server, you do not have to configure
any printer here; printers will be automatically detected.
-In case of doubt, select \"Remote cups server\"."),
+In case of doubt, select \"Remote CUPS server\"."),
[ @printer::printer_type_inv{qw(CUPS LPD SOCKET)} ],
$printer->{str_type},
);
$printer->{TYPE} = $printer::printer_type{$printer->{str_type}};
}
$printer->{TYPE} eq 'CUPS' and return; #- exit printer configuration.
- $in->ask_from_entries_refH([_("Select Printer Connection"), _("Ok"), $::beginner ? () : _("Remove queue")],
+ $in->ask_from_entries_refH([_("Select Printer Connection"), _("Ok"),
+ $::beginner || !$printer->{configured}{$printer->{QUEUE}} ? () : _("Remove queue")],
_("Every printer need a name (for example lp).
Other parameters such as the description of the printer or its location
can be defined. What name should be used for this printer and