summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
authorOlivier Blin <oblin@mandriva.org>2005-08-30 16:54:21 +0000
committerOlivier Blin <oblin@mandriva.org>2005-08-30 16:54:21 +0000
commit237a287656548315efbbc4e0161cf6edee005c26 (patch)
tree691e3d77c464ffdc086f9cd0924f72ab2732c80f /perl-install
parent9478e0e4744c1fd4cc5e2d5bab82b124191b93fd (diff)
downloaddrakx-backup-do-not-use-237a287656548315efbbc4e0161cf6edee005c26.tar
drakx-backup-do-not-use-237a287656548315efbbc4e0161cf6edee005c26.tar.gz
drakx-backup-do-not-use-237a287656548315efbbc4e0161cf6edee005c26.tar.bz2
drakx-backup-do-not-use-237a287656548315efbbc4e0161cf6edee005c26.tar.xz
drakx-backup-do-not-use-237a287656548315efbbc4e0161cf6edee005c26.zip
- configure wpa_supplicant correctly for shared or passwordless connections
- split write_interface_setttings out of network::network::write_interface_conf - wpa_supplicant may list some networks twice, handle it - rewrite drakroam to use wpa_supplicant
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/network/monitor.pm8
-rw-r--r--perl-install/network/network.pm29
-rw-r--r--perl-install/network/wireless.pm26
-rwxr-xr-xperl-install/standalone/drakroam520
4 files changed, 186 insertions, 397 deletions
diff --git a/perl-install/network/monitor.pm b/perl-install/network/monitor.pm
index eea814bc8..38912af97 100644
--- a/perl-install/network/monitor.pm
+++ b/perl-install/network/monitor.pm
@@ -21,8 +21,12 @@ sub list_wireless {
my %networks;
#- bssid / frequency / signal level / flags / ssid
while ($results =~ /^((?:[0-9a-f]{2}:){5}[0-9a-f]{2})\t(\d+)\t(\d+)\t(.*?)\t(.*)$/mg) {
- $networks{$1} = { frequency => $2, signal_level => $3, flags => $4, ssid => $5 };
- $networks{$1}{approx_level} = 20 + min(80, int($3/20)*20);
+ # wpa_supplicant may list the network two times, use ||=
+ $networks{$1}{frequency} ||= $2;
+ $networks{$1}{signal_level} ||= $3;
+ $networks{$1}{flags} ||= $4;
+ $networks{$1}{ssid} ||= $5 if $5 ne '<hidden>';
+ $networks{$1}{approx_level} ||= 20 + min(80, int($3/20)*20);
}
my $list;
eval { $list = $o->call_method('ListNetworks') };
diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm
index afce07917..75c70975b 100644
--- a/perl-install/network/network.pm
+++ b/perl-install/network/network.pm
@@ -179,6 +179,20 @@ sub update_broadcast_and_network {
$intf->{NETWORK} = join('.', mapn { int($_[0]) & $_[1] } \@ip, \@mask);
}
+sub write_interface_settings {
+ my ($intf, $file) = @_;
+ setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR METRIC MII_NOT_SUPPORTED TYPE USERCTL ATM_ADDR ETHTOOL_OPTS VLAN MTU MS_DNS1 MS_DNS2 DOMAIN),
+ qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV WIRELESS_WPA_DRIVER),
+ qw(DVB_ADAPTER_ID DVB_NETWORK_DEMUX DVB_NETWORK_PID),
+ qw(IPV6INIT IPV6TO4INIT),
+ if_($intf->{BOOTPROTO} eq "dhcp", qw(DHCP_CLIENT DHCP_HOSTNAME NEEDHOSTNAME PEERDNS PEERYP PEERNTPD DHCP_TIMEOUT)),
+ if_($intf->{DEVICE} =~ /^ippp\d+$/, qw(DIAL_ON_IFUP))
+ );
+ substInFile { s/^DEVICE='(`.*`)'/DEVICE=$1/g } $file; #- remove quotes if DEVICE is the result of a command
+ chmod $intf->{WIRELESS_ENC_KEY} ? 0700 : 0755, $file; #- hide WEP key for non-root users
+ log::explanations("written $intf->{DEVICE} interface configuration in $file");
+}
+
sub write_interface_conf {
my ($net, $name) = @_;
@@ -198,16 +212,7 @@ sub write_interface_conf {
defined($intf->{METRIC}) or $intf->{METRIC} = network::tools::get_default_metric(network::tools::get_interface_type($intf)),
$intf->{BOOTPROTO} =~ s/dhcp.*/dhcp/;
- setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR METRIC MII_NOT_SUPPORTED TYPE USERCTL ATM_ADDR ETHTOOL_OPTS VLAN MTU MS_DNS1 MS_DNS2 DOMAIN),
- qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV WIRELESS_WPA_DRIVER),
- qw(DVB_ADAPTER_ID DVB_NETWORK_DEMUX DVB_NETWORK_PID),
- qw(IPV6INIT IPV6TO4INIT),
- if_($intf->{BOOTPROTO} eq "dhcp", qw(DHCP_CLIENT DHCP_HOSTNAME NEEDHOSTNAME PEERDNS PEERYP PEERNTPD DHCP_TIMEOUT)),
- if_($intf->{DEVICE} =~ /^ippp\d+$/, qw(DIAL_ON_IFUP))
- );
- substInFile { s/^DEVICE='(`.*`)'/DEVICE=$1/g } $file; #- remove quotes if DEVICE is the result of a command
- chmod $intf->{WIRELESS_ENC_KEY} ? 0700 : 0755, $file; #- hide WEP key for non-root users
- log::explanations("written $intf->{DEVICE} interface configuration in $file");
+ write_interface_settings($intf, $file);
}
sub add2hosts {
@@ -507,6 +512,10 @@ sub read_net_conf {
$intf->{DEVICE} ||= $device;
}
}
+ $net->{wireless} ||= {};
+ foreach (all("$::prefix/etc/sysconfig/network-scripts/wireless.d")) {
+ $net->{wireless}{$_} = { getVarsFromSh("$::prefix/etc/sysconfig/network-scripts/wireless.d/$_") };
+ }
netprofile_read($net);
if (my $default_intf = network::tools::get_default_gateway_interface($net)) {
$net->{net_interface} = $default_intf;
diff --git a/perl-install/network/wireless.pm b/perl-install/network/wireless.pm
index 62971bcaf..79a6ec9a0 100644
--- a/perl-install/network/wireless.pm
+++ b/perl-install/network/wireless.pm
@@ -108,19 +108,21 @@ sub wpa_supplicant_add_network {
my $network = {
ssid => qq("$essid"),
scan_ssid => 1,
- $enc_mode eq 'wpa-psk' ?
- (
- psk => convert_key_for_wpa_supplicant($key),
- ) :
- member($enc_mode, qw(open restricted)) ?
- (
- key_mgmt => 'NONE',
- wep_key0 => convert_key_for_wpa_supplicant($key),
- wep_tx_keyidx => 0,
- auth_alg => 'SHARED',
- ) :
- ()
};
+
+ if ($enc_mode eq 'wpa-psk') {
+ $network->{psk} = convert_key_for_wpa_supplicant($key);
+ } else {
+ $network->{key_mgmt} = 'NONE';
+ if (member($enc_mode, qw(open restricted))) {
+ put_in_hash($network, {
+ wep_key0 => convert_key_for_wpa_supplicant($key),
+ wep_tx_keyidx => 0,
+ auth_alg => $enc_mode eq 'restricted' ? 'SHARED' : 'OPEN',
+ });
+ }
+ }
+
@$conf = difference2($conf, [ wpa_supplicant_find_similar($conf, $network) ]);
push @$conf, $network;
wpa_supplicant_write_conf($conf);
diff --git a/perl-install/standalone/drakroam b/perl-install/standalone/drakroam
index 3a251b48b..437190e07 100755
--- a/perl-install/standalone/drakroam
+++ b/perl-install/standalone/drakroam
@@ -1,28 +1,10 @@
#!/usr/bin/perl
# drakroam: wireless network roaming GUI
-# beta version uses wlandetect as backend
-# Austin Acton, 2005
-# <austin@mandrake.org>
+# Austin Acton, 2004 <austin@mandriva.org>
+# Olivier Blin, 2005 <oblin@mandriva.com>
# Licensed under the GPL
-# problems
-# - deletes comments in config file
-# - expects an ifcfg file for static IP configurations (not uncommon)
-# - roaming status fails (no idea why)
-# maybe same reason bash-completion killall can not see wlandetect?
-
-# todo (wlandetect version)
-# - make known and available lists have more rows by default (why so small?)
-# - refresh status every x seconds
-# - find a good way to drop the access point and resume roaming
-# - make 'key' column wider by default
-# todo (waproamd version)
-# - listen to dbus for pings from waproamd; update all on receiving a dbus ping
-# - setup static network configurations
-# - handle keys (can key file be named after ESSID?)
-# - should files be named as MAC or as essid:ESSID ?
-
use strict;
use lib qw(/usr/lib/libDrakX);
@@ -30,369 +12,161 @@ use standalone;
use common;
use run_program;
use detect_devices;
-use Glib qw(TRUE FALSE);
+use interactive;
+use mygtk2;
use ugtk2 qw(:create :helpers :wrappers);
use Gtk2::SimpleList;
-use Socket;
+use network::monitor;
+use network::wireless;
+use network::network;
+use network::ethernet;
+
+my $in = 'interactive'->vnew('su');
-require_root_capability();
+my $wireless_device = find { detect_devices::is_wireless_interface($_) } detect_devices::getNet();
-unless (detect_devices::has_wireless()) {
+unless ($wireless_device) {
ugtk2::err_dialog(N("Error"), N("You do not have any wireless interface.
Run the \"%s\" assistant from the Mandriva Linux Control Center", N("Set up a new network interface (LAN, ISDN, ADSL, ...)")));
ugtk2::exit(0) if !$::testing;
}
+my $modules_conf = modules::any_conf->read;
+my $dev = find { $_->[0] eq $wireless_device } network::ethernet::get_eth_cards($modules_conf);
+my $wireless_module = $dev->[1];
+my $net = {};
+network::network::read_net_conf($net);
-
-# global settings
-my $route = '/sbin/route -n';
-my $IWList = '/sbin/iwlist';
-my $IWConfig = '/sbin/iwconfig';
-my $IFConfig = '/sbin/ifconfig';
-my $IFUp = '/sbin/ifup';
-my $IFDown = '/sbin/ifdown';
-my $DHClient = '/sbin/dhclient';
-my $enable_roaming = member('--roaming', @ARGV); #- not tested yet ...
-
-# initialize variables
-my $ScanInterval = 30; # tell deamon to search for new nets every x seconds
-
-my ($KnownList, $AvailableList);
-my $device;
-
-my %available_roaming_daemons = (
- wlandetect => {
- config_location => '/etc/wlandetect.conf',
- binary => '/usr/sbin/wlandetect',
- start_options => sub {
- my ($interval, undef) = @_;
- "-d -t $interval";
- },
- read_config => sub {
- my ($config) = @_;
- each_index {
- /^#/ || /^\n/ and next; #ignore comments and blank lines
- if (/^(\S+)\s+(.*)$/) {
- my ($essid, $mode, $channel, $dhcp, $key);
- my $command = $2;
- # setup new network entry
- $essid = $1;
- ($mode) = $command =~ /mode\s([^\s;]+)/;
- ($channel) = $command =~ /channel\s([^\s;]+)/;
- ($key) = $command =~ /key\s([^\s;]+)/;
- $dhcp = $command =~ /dhclient/;
- &AddNet($essid, $mode, $channel, $dhcp, $key);
- }
- else { die "Line $::i of configuration file is not parseable.\n" }
- } cat_($config);
- },
- write_config => sub {
- my ($config) = @_;
- my @contents = (
- "#wlandetect configuration file\n",
- "#format: essid<tab><tab>commands\n",
- "#use \@DEV\@ for device name\n"
- );
- foreach my $row (@{$KnownList->{data}}) { # again, lame
- my $essid = $row->[0];
- my $iwc = join(' ', $IWConfig, "essid $essid",
- if_($row->[1], "mode $row->[1]"),
- if_($row->[2], "channel $row->[2]"),
- if_($row->[4], "key $row->[4]"));
- my $ifc = $row->[3] ? "$IFConfig \@DEV\@ up; $DHClient \@DEV\@" : "$IFUp \@DEV\@";
- push @contents, "$essid\t\t$iwc; $ifc\n";
- }
- output_with_perm($config, 0600, @contents);
- },
- },
- waproamd => {
- config_location => '/etc/waproamd/keys',
- binary => '/usr/sbin/waproamd',
- start_options => sub {
- my ($interval, $device) = @_;
- "-i $device -t $interval";
- },
- read_config => sub {
- my ($config) = @_;
- foreach my $file (all($config)) {
- my ($essid) = $file =~ /^(.*)\.wep$/ or next;
- &AddNet($essid, '', '', 1, cat_("$config/$file"));
- }
- },
- write_config => sub {
- my ($config) = @_;
- foreach my $row (@{$KnownList->{data}}) { # again, lame
- my $essid = $row->[0];
- output_with_perm("$config/$essid.wep", 0600, $row->[4]);
- }
- },
- },
+my $wireless_list = Gtk2::SimpleList->new(
+ "AP" => "hidden",
+ '' => "pixbuf",
+ N("SSID") => "text",
+ '' => "pixbuf",
+ N("Encryption") => "text",
+ N("Signal strength") => "pixbuf"
);
-
-my $roaming_daemon = $available_roaming_daemons{wlandetect};
-
-my $ScanEntry = Gtk2::Entry->new;
-$ScanEntry->set_width_chars(4);
-$ScanEntry->set_text($ScanInterval);
-
-$KnownList = Gtk2::SimpleList->new(
- N("ESSID") => "text",
- N("Mode") => "text",
- N("Channel") => "text",
- N("DHCP") => "bool",
- N("Key") => "text"
- );
-$KnownList->get_selection->set_mode('single');
-$KnownList->set_reorderable(1);
-$KnownList->set_column_editable(1, TRUE); # allow to change mode
-$KnownList->set_column_editable(2, TRUE); # allow to change channel
-$KnownList->set_column_editable(4, TRUE); # allow to change key
-
-$AvailableList = Gtk2::SimpleList->new(
- "ESSID" => "text",
- "Type" => "text",
- "Encryption" => "text",
- "Signal (%)" => "int"
- );
-$AvailableList->get_selection->set_mode('single');
-
-my $NetLabel = Gtk2::WrappedLabel->new(N("Network:"));
-my $IpLabel = Gtk2::WrappedLabel->new(N("IP:"));
-my $GwLabel = Gtk2::WrappedLabel->new(N("Gateway:"));
-my $ModeLabel = Gtk2::WrappedLabel->new(N("Mode:"));
-my $WepLabel = Gtk2::WrappedLabel->new(N("Encryption:"));
-my $SignalLabel = Gtk2::WrappedLabel->new(N("Signal:"));
-
-my $net_field = Gtk2::WrappedLabel->new;
-my $mode_field = Gtk2::WrappedLabel->new;
-my $ip_field = Gtk2::WrappedLabel->new;
-my $wep_field = Gtk2::WrappedLabel->new;
-my $gw_field = Gtk2::WrappedLabel->new;
-my $sig_field = Gtk2::WrappedLabel->new;
-
-
-my $w = ugtk2->new('Drakroam');
-gtkadd(gtkset_border_width($w->{window}, 2),
- gtkpack_(Gtk2::VBox->new,
- if_($enable_roaming,
- 0, gtkadd(gtkset_border_width(Gtk2::Frame->new(N("Roaming")), 2),
- gtkpack(create_hbox(),
- gtkpack(Gtk2::VBox->new,
- my $RoamStatus = Gtk2::Label->new(N("Roaming: %s", N("off"))),
- gtkpack(create_hbox(),
- gtksignal_connect(Gtk2::Button->new(N("Start")), clicked => sub { &StartRoam }),
- gtksignal_connect(Gtk2::Button->new(N("Stop")), clicked => sub { &StopRoam })
- )
- ),
- gtkpack(Gtk2::VBox->new,
- Gtk2::Label->new(N("Scan interval (sec): ")),
- gtkpack(Gtk2::HBox->new,
- $ScanEntry,
- gtksignal_connect(Gtk2::Button->new(N("Set")), clicked => sub { &SetInterval })
- )
- )
- )
- )),
- 1, gtkadd(gtkset_border_width(Gtk2::Frame->new(N("Known Networks (Drag up/down or edit)")), 2),
- gtkpack_(Gtk2::VBox->new,
- 1, create_scrolled_window($KnownList),
- 0, gtkpack(create_hbox(),
- gtksignal_connect(Gtk2::Button->new(N("Remove")), clicked => sub {
- my ($selected) = $KnownList->get_selected_indices;
- &RemoveNet($selected);
- }),
- gtksignal_connect(Gtk2::Button->new(N("Connect")), clicked => sub {
- my ($selected) = $KnownList->get_selected_indices;
- &ConnectNow($selected);
- }),
- gtksignal_connect(Gtk2::Button->new(N("Save")), clicked => sub { &WriteConfig })
- )
- )
- ),
- 1, gtkadd(gtkset_border_width(Gtk2::Frame->new(N("Available Networks")), 2),
- gtkpack_(Gtk2::VBox->new,
- 1, create_scrolled_window($AvailableList),
- 0, gtkpack(create_hbox(),
- gtksignal_connect(Gtk2::Button->new(N("Add")), clicked => sub {
- my @selected = $AvailableList->get_selected_indices;
- my ($mode, $channel, $key);
- my $essid = $AvailableList->{data}["@selected"][0];
- my $dhcp = 1; # assume dhcp for new networks
- if ($essid) {
- &AddNet($essid, $mode, $channel, $dhcp, $key);
- } else {
- print "ESSID is empty, skipping network\n";
- }
- }),
- gtksignal_connect(Gtk2::Button->new(N("Rescan")), clicked => sub { &UpdateAvailable })
- )
- )
- ),
- 0, gtkadd(gtkset_border_width(Gtk2::Frame->new(N("Status")), 2),
- gtkpack(Gtk2::VBox->new,
- create_packtable({ col_spacings => 5, row_spacings => 5, homogenous => 1 },
- [ $NetLabel, $net_field, $IpLabel, $ip_field, $GwLabel, $gw_field ],
- [ $ModeLabel, $mode_field, $WepLabel, $wep_field, $SignalLabel, $sig_field ],
- ),
- gtkpack(create_hbox(),
- gtksignal_connect(Gtk2::Button->new(N("Disconnect")), clicked => sub { &Disconnect }),
- gtksignal_connect(Gtk2::Button->new(N("Refresh")), clicked => sub { &UpdateStatus }),
- gtksignal_connect(Gtk2::Button->new(N("Close")), clicked => sub { Gtk2->main_quit })
- )
- )
- ),
- )
- );
-
-# fill the GUI
-&ReadConfig;
-&UpdateAll;
-
-sub UpdateAll {
- &UpdateAvailable; #must go first as it defines the device name
- &UpdateStatus;
- &UpdateRoaming;
-}
-
-sub isRoamingRunning() {
- my $name = basename($roaming_daemon->{binary});
- any { /\Q$name\E$/ } run_program::get_stdout("ps", "-A");
-}
-
-sub UpdateRoaming() {
- my $status = isRoamingRunning() ? N("on") : N("off");
- $RoamStatus->set_text(N("Roaming: %s", $status));
- return FALSE; #- do not update again if launched on timeout
-}
-
-sub UpdateStatus() {
- my $CurrentNet = "-";
- my $CurrentIP = "---.---.---.---";
- my $CurrentGW = "---.---.---.---";
- my $CurrentMode = "";
- my $CurrentWEP = "";
- my $CurrentSignal = "-";
- print "Updating\n" if $::testing;
- foreach (run_program::get_stdout($IWConfig, $device)) {
- /ESSID:"(.*?)"/ and $CurrentNet = $1;
- /Mode:(\S*)\s/ and $CurrentMode = $1;
- /key:(\S*)\s/ and $CurrentWEP = $1;
- m!Quality[:=](\S*)/! and $CurrentSignal = $1;
- }
- foreach (run_program::get_stdout($IFConfig, $device)) {
- if (/inet addr:(\S*)\s/) { $CurrentIP = $1 }
- }
- foreach (run_program::get_stdout($route)) {
- #- FIXME: use timeout for DNS resolution, factorize with activefw.pm
- if (/^0.0.0.0\s*(\S*)\s/) { $CurrentGW = gethostbyaddr(inet_aton($1), AF_INET) }
- else { $CurrentGW = "---.---.---.---" }
- }
- $net_field->set_text($CurrentNet);
- $mode_field->set_text($CurrentMode);
- $ip_field->set_text($CurrentIP);
- $wep_field->set_text($CurrentWEP);
- $gw_field->set_text($CurrentGW);
- $sig_field->set_text($CurrentSignal);
-}
-
-sub UpdateAvailable() {
- my ($essid, $mode, $wep, $signal);
- print "Running iwlist\n" if $::testing;
- @{$AvailableList->{data}} = ();
- foreach (`$IWList scan 2>/dev/null`) {
- /([^ ]+)([ \t]+)Scan completed :/ and $device = $1;
- /([^ ]+)([ \t]+)No scan results/ and $device = $1;
- /ESSID:"(.*?)"/ and $essid = $1;
- /Mode:(\S*)/ and $mode = $1;
- m!Quality[:=](\S*)/! and $signal = $1;
- if (/key:(\S*)\s/) {
- $wep = $1;
- print "ESSID: $essid, Mode: $mode, WEP: $wep, Signal: $signal\n" if $::testing;
- push @{$AvailableList->{data}}, [$essid, $mode, $wep, $signal];
- }
- }
-}
-
-sub AddNet {
- my ($essid, $mode, $channel, $dhcp, $key) = @_;
- member($essid, map { $_->[0] } @{$KnownList->{data}}) and return;
- print "Adding net $essid\n" if $::testing;
- push @{$KnownList->{data}}, [ $essid, $mode, $channel, $dhcp, $key ];
-}
-
-sub RemoveNet {
- my ($selected) = @_;
- my $essid = $KnownList->{data}[$selected][0];
- print "Removing net $essid\n" if $::testing;
- splice @{$KnownList->{data}}, $selected, 1;
-}
-
-sub ReadConfig() {
- $_->{read_config}($_->{config_location}) foreach values %available_roaming_daemons;
-}
-
-sub WriteConfig() {
- $_->{write_config}($_->{config_location}) foreach values %available_roaming_daemons;
-}
-
-sub StartRoam() {
- my $options = $roaming_daemon->{start_options}($ScanInterval, $device);
- my $name = basename($roaming_daemon->{binary});
- system("killall $name; $roaming_daemon->{binary} $options &");
- Glib::Timeout->add(1000, \&UpdateRoaming);
-}
-
-sub StopRoam() {
- my $name = basename($roaming_daemon->{binary});
- system("killall $name");
- Glib::Timeout->add(1000, \&UpdateRoaming);
-}
-
-sub SetInterval() {
- $ScanInterval = $ScanEntry->get_text;
- if (isRoamingRunning()) {
- StopRoam();
- StartRoam();
- }
-}
-
-sub ConnectNow {
- my ($row) = @_;
- my @command = "";
- push @command, "$IWConfig $device essid $KnownList->{data}[$row][0] ";
- my %commands = (1 => 'mode', 2 => 'channel', 4 => 'key');
- push @command, map { "$commands{$_} $KnownList->{data}[$row][$_] " } grep { $KnownList->{data}[$row][$_] } keys %commands;
- push @command, "; ";
- if ($KnownList->{data}[$row][3]) {
- push @command, "$IFConfig $device up; $DHClient $device";
- }
- else {
- push @command, "$IFUp $device";
- }
- my $ToBash = join("", @command);
- print "Sending $ToBash\n" if $::testing;
- system($ToBash);
- &UpdateStatus;
-}
-
-sub Disconnect {
- print "Dropping $device\n" if $::testing;
- system("$IFDown $device");
- &UpdateStatus;
-}
-
-sub Dialog {
- my ($FilePointer) = @_;
- my $content = join('', cat_($FilePointer));
- # dump into a dialog
- my $AboutWindow = Gtk2::Dialog->new(N("Information"), $w->{real_window},
- 'destroy-with-parent',
- N("Ok") => 'none');
- $AboutWindow->vbox->add(create_scrolled_window(Gtk2::Label->new($content)));
- $AboutWindow->signal_connect(response => sub { $_[0]->destroy });
- $AboutWindow->show_all;
-}
-
+$wireless_list->get_selection->set_mode('single');
+
+my $dbus = dbus_object::system_bus();
+my $monitor = network::monitor->new($dbus);
+my $wireless_networks = {};
+
+my %pixbufs =
+ (
+ state => { map { $_ => gtkcreate_pixbuf($_) } qw(connected disconnected) },
+ link_level => { map {
+ $_ => gtkcreate_pixbuf('wifi-' . sprintf('%03d', $_) . '.png')->scale_simple(24, 24, 'hyper');
+ } qw(20 40 60 80 100) },
+ keyring => gtkcreate_pixbuf("/usr/share/pixmaps/keyring-small.png")->scale_simple(24, 24, 'hyper'), #- provided by usermode, required by drakxtools
+ );
+
+sub update_networks() {
+ $wireless_networks = $monitor->list_wireless;
+ @{$wireless_list->{data}} = ();
+
+ while (my ($ap, $network) = each(%$wireless_networks)) {
+ push @{$wireless_list->{data}}, [
+ $ap,
+ $network->{current} ? $pixbufs{state}{connected} : undef,
+ $network->{ssid} || $ap,
+ $network->{flags} ? $pixbufs{keyring} : undef,
+ $network->{flags},
+ $pixbufs{link_level}{$network->{approx_level}}
+ ];
+ }
+ 1;
+}
+
+sub configure_selected() {
+ my ($selected) = $wireless_list->get_selected_indices or return;
+ my $ap = $wireless_list->{data}[$selected][0];
+ my $network = $wireless_networks->{$ap};
+ my $ssid = $network->{ssid};
+
+ my $wireless_net =
+ $ssid && exists $net->{wireless}{$ssid} ?
+ $net->{wireless}{$ssid} :
+ exists $net->{wireless}{$ap} ?
+ $net->{wireless}{$ap} :
+ {};
+ $wireless_net->{WIRELESS_ESSID} = $ssid if $ssid;
+
+ my ($wireless_enc_mode, $wireless_enc_key, $wireless_restricted);
+ ($wireless_enc_key, $wireless_restricted) = network::wireless::get_wep_key_from_iwconfig($wireless_net->{WIRELESS_ENC_KEY});
+ #- FIXME: handle restricted
+ $wireless_enc_mode = $network->{flags} =~ /wpa/i ? 'wpa-psk' : $network->{flags} =~ /wep/i ? 'open' : 'none';
+
+ my $dhcp = to_bool(!exists($wireless_net->{BOOTPROTO}) || $wireless_net->{BOOTPROTO} eq "dhcp");
+
+ $in->ask_from_({
+ title => "Wireless settings",
+ messages => N("Please enter settings for wireless network \"%s\"", $ssid || $ap)
+ },
+ [
+ { label => N("Network name (ESSID)"), val => \$wireless_net->{WIRELESS_ESSID}, disabled => sub { $ssid } },
+ { label => N("Encryption mode"), val => \$wireless_enc_mode,
+ list => [ keys %network::wireless::wireless_enc_modes ],
+ sort => 1,
+ format => sub { translate($network::wireless::wireless_enc_modes{$_[0]}) } },
+ { label => N("Encryption key"), val => \$wireless_enc_key, disabled => sub { $wireless_enc_mode eq 'none' } },
+ { text => N("Automatic IP (BOOTP/DHCP)"), val => \$dhcp, type => 'bool' },
+ { label => N("IP address"), val => \$wireless_net->{IPADDR}, disabled => sub { $dhcp } },
+ { label => N("DNS server"), val => \$wireless_net->{MS_DNS1}, disabled => sub { $dhcp } },
+ { label => N("Gateway IP address"), val => \$wireless_net->{GATEWAY}, disabled => sub { $dhcp } },
+ ],
+ ) or return;
+
+ $wireless_net->{BOOTPROTO} = $dhcp ? 'dhcp' : 'static';
+ $wireless_net->{WIRELESS_ENC_KEY} = network::wireless::convert_wep_key_for_iwconfig($wireless_enc_key, $wireless_enc_mode eq 'restricted');
+ $wireless_net->{WIRELESS_WPA_DRIVER} = network::wireless::wpa_supplicant_get_driver($wireless_module);
+
+ my $wireless_file = "/etc/sysconfig/network-scripts/wireless.d/" . ($ssid || $ap);
+ network::network::write_interface_settings($wireless_net, $wireless_file);
+ network::wireless::wpa_supplicant_add_network($wireless_net->{WIRELESS_ESSID}, $wireless_enc_mode, $wireless_enc_key);
+
+ system('/usr/sbin/wpa_cli reconfigure'); #- this should be handled by the monitoring daemon instead
+
+ 1;
+}
+
+sub connect_to_selected() {
+ my ($selected) = $wireless_list->get_selected_indices or return;
+ my $id = $wireless_list->{data}[$selected][0];
+
+ if (defined $id) {
+ eval { $monitor->select_network($id) };
+ $@ and err_dialog(N("Wireless connection"), N("Unable to contact daemon"));
+ } else {
+ configure_selected();
+ #- apply config in wpa_supplicant and retry
+ }
+
+ gtkset_mousecursor_wait();
+
+ Glib::Timeout->add(5000, sub {
+ update_networks();
+ gtkset_mousecursor_normal();
+ 0;
+ });
+}
+
+update_networks();
+Glib::Timeout->add(30000, \&update_networks);
+
+my $w = ugtk2->new(N("Wireless connection"));
+gtkadd($w->{window},
+ gtknew('VBox', spacing => 5, children => [
+ 0, if_(!$::isEmbedded, Gtk2::Banner->new('/usr/share/mcc/themes/default/drakroam-mdk.png', N("Wireless connection"))),
+ 1, gtknew('HBox', spacing => 5, children => [
+ 1, gtknew('ScrolledWindow', width => 420, height => 300, child => $wireless_list),
+ 0, gtknew('VButtonBox', layout => 'edge', children_loose => [
+ gtknew('Button', text => N("Configure"), clicked => \&configure_selected),
+ gtknew('Button', text => N("Connect"), clicked => \&connect_to_selected),
+ gtknew('Button', text => N("Refresh"), clicked => \&update_networks),
+ gtknew('Button', text => N("Quit"), clicked => sub { Gtk2->main_quit })
+ ]),
+ ]),
+ ]),
+ );
$w->main;