first sparc release of DrakX.

19 files changed, 683 insertions, 153 deletions

diff --git a/perl-install/Makefile b/perl-install/Makefile
index 230d61fec..e0eaf3fdc 100644
--- a/perl-install/Makefile
+++ b/perl-install/Makefile
@@ -55,8 +55,9 @@ install_pms: $(DIRS)
 
 get_needed_files: $(DIRS)
 #	export PERL_INSTALL_TEST=1 ; strace -f -e trace=file -o '| grep -v "(No such file or directory)" | sed -e "s/[^\"]*\"//" -e "s/\".*//" | grep "^/" | grep -v -e "^/tmp" -e "^/home" -e "^/proc" -e "^/var" -e "^/dev" -e "^/etc" -e "^/usr/lib/rpm" > /tmp/list ' $(PERL) -d install2 < /dev/null
-	cp -f list /tmp/list
-	perl -pi -e "s/ARCH/$(ARCH)/" /tmp/list
+	cp -f `../tools/specific_arch list` /tmp/list
+#	cp -f list /tmp/list
+#	perl -pi -e "s/ARCH/$(ARCH)/" /tmp/list
 	find auto -follow -name "*.so" >> /tmp/list
 
 	for i in $(LOCALFILES) `cat /tmp/list` ; do \
@@ -75,6 +76,13 @@ get_needed_files: $(DIRS)
 	install -d $(ROOTDEST)/Mandrake/base
 	install -s $(LOCALFILES) $(DEST)/usr/bin
 #	cp -f $(LOCALFILES2) $(DEST)/usr/bin
+ifeq (sparc,$(ARCH))
+	cp -a /usr/X11R6/lib/X11/xkb $(DEST)/usr/X11R6/lib/X11
+	rm -f $(DEST)/usr/X11R6/lib/X11/xkb/compiled
+	ln -s /tmp $(DEST)/usr/X11R6/lib/X11/xkb/compiled
+	ln -s /usr/X11R6/lib/X11 $(DEST)/usr/lib/X11
+	ln -s /usr/X11R6/lib/X11/xkb/xkbcomp $(DEST)/usr/bin/xkbcomp
+endif
 
 	for i in `cat /tmp/list`; do \
 		if (echo $$i | grep -q "lib/[^/]*\.so"); then \
@@ -101,7 +109,7 @@ get_needed_files: $(DIRS)
 
 	perl -ane 'symlink "$$F[1]", "$(DEST)/usr/bin/$$F[0]"' aliases
 
-	tar xfy locales.tar.bz2 -C $(DEST)
+	tar xfy `../tools/specific_arch locales.tar.bz2` -C $(DEST)
 #	DEST=$(DEST) perl -I. -MForMakefile -e 'locale()'
 #	DEST=$(DEST) perl -I. -MForMakefile -e 'xmodmap()'
 
@@ -128,7 +136,7 @@ get_needed_files: $(DIRS)
 	tar xyC $(DEST) -f ../install/install1_pcmcia.tar.bz2 ./etc/pcmcia
 
 full_stage2:
-	sudo rm -rf $(DEST)
+	rm -rf $(DEST)
 	mkdir -p $(DEST)
 	$(MAKE) get_needed_files 
 	$(MAKE) stage2
diff --git a/perl-install/Xconfigurator_consts.pm b/perl-install/Xconfigurator_consts.pm
index 4cb0d8730..11fee769d 100644
--- a/perl-install/Xconfigurator_consts.pm
+++ b/perl-install/Xconfigurator_consts.pm
@@ -540,6 +540,45 @@ $keyboardsection_part2 = '
 #    XkbDisable
 ';
 
+if (arch() =~ /^sparc/) {
+    $keyboardsection_part3 = '
+# To customise the XKB settings to suit your keyboard, modify the
+# lines below (which are the defaults).  For example:
+#    XkbModel    "type6"
+# If you have a SUN keyboard, you may use:
+#    XkbModel    "sun"
+#
+# Then to change the language, change the Layout setting.
+# For example, a german layout can be obtained with:
+#    XkbLayout   "de"
+# or:
+#    XkbLayout   "de"
+#    XkbVariant  "nodeadkeys"
+#
+# If you\'d like to switch the positions of your capslock and
+# control keys, use:
+#    XkbOptions  "ctrl:swapcaps"
+
+# These are the default XKB settings for XFree86 on SUN:
+#    XkbRules    "sun"
+#    XkbModel    "type5_unix"
+#    XkbLayout   "us"
+#    XkbCompat   "compat/complete"
+#    XkbTypes    "types/complete"
+#    XkbKeycodes "sun(type5)"
+#    XkbGeometry "sun(type5)"
+#    XkbSymbols  "sun/us(sun5)"
+
+    XkbRules    "sun"
+    XkbModel    "sun"
+    XkbLayout   "us"
+    XkbCompat   "compat/complete"
+    XkbTypes    "types/complete"
+    XkbKeycodes "sun(type5)"
+    XkbGeometry "sun(type5)"
+    XkbSymbols  "sun/us(sun5)"
+';
+} else {
 $keyboardsection_part3 = '
 # To customise the XKB settings to suit your keyboard, modify the
 # lines below (which are the defaults).  For example, for a non-U.S.
@@ -574,6 +613,7 @@ $keyboardsection_part3 = '
     XkbRules        "xfree86"
     XkbModel        "pc101"
 ';
+}
 
 $keyboardsection_end = '
 EndSection
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
index f2f3a48de..3920de74b 100644
--- a/perl-install/fs.pm
+++ b/perl-install/fs.pm
@@ -144,11 +144,13 @@ sub mount_part($;$$) {
 
     $part->{isMounted} and return;
 
-    if (isSwap($part)) {
-	swap::swapon($part->{device});
-    } else {
-	$part->{mntpoint} or die "missing mount point";
-	mount(devices::make($part->{device}), ($prefix || '') . $part->{mntpoint}, type2fs($part->{type}), $rdonly);
+    unless ($::testing) {
+	if (isSwap($part)) {
+	  swap::swapon($part->{device});
+	} else {
+	    $part->{mntpoint} or die "missing mount point";
+	    mount(devices::make($part->{device}), ($prefix || '') . $part->{mntpoint}, type2fs($part->{type}), $rdonly);
+	}
     }
     $part->{isMounted} = $part->{isFormatted} = 1; #- assume that if mount works, partition is formatted
 }
@@ -158,9 +160,11 @@ sub umount_part($;$) {
 
     $part->{isMounted} or return;
 
-    isSwap($part) ?
-      swap::swapoff($part->{device}) :
-      umount(($prefix || '') . ($part->{mntpoint} || devices::make($part->{device})));
+    unless ($::testing) {
+	isSwap($part) ?
+	  swap::swapoff($part->{device}) :
+	  umount(($prefix || '') . ($part->{mntpoint} || devices::make($part->{device})));
+    }
     $part->{isMounted} = 0;
 }
 
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
index 5bcabddeb..57f29e8cc 100644
--- a/perl-install/fsedit.pm
+++ b/perl-install/fsedit.pm
@@ -84,10 +84,16 @@ sub readProcPartitions {
     @parts;
 }
 
+#- get all normal partition including special ones as found on sparc.
 sub get_fstab(@) {
     map { partition_table::get_normal_parts($_) } @_;
 }
 
+#- get normal partition that should be visible for working on.
+sub get_visible_fstab(@) {
+    grep { $_ && !partition_table::isWholedisk($_) } get_fstab(@_);
+}
+
 sub free_space(@) {
     sum map { $_->{size} } map { partition_table::get_holes($_) } @_;
 }
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index f6ca92a64..80535764a 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -121,7 +121,7 @@ $o = $::o = {
     autoSCSI   => 0,
     mkbootdisk => 1, #- no mkbootdisk if 0 or undef, find a floppy with 1, or fd1
 #-    packages   => [ qw() ],
-    partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0, autoformat => 0 }, #- , readonly => 0
+    partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0, autoformat => 0 }, #-, readonly => 0 },
 #-    security => 2,
   partitions => [
     { mntpoint => "/boot", size =>  10 << 11, type => 0x83, maxsize => 30 << 11 },
@@ -189,9 +189,10 @@ $o = $::o = {
 #-    display => "192.168.1.19:1",
     steps        => \%installSteps,
     orderedSteps => \@orderedInstallSteps,
-    base => [ qw(basesystem sed initscripts console-tools utempter ldconfig chkconfig ntsysv setup filesystem SysVinit bdflush crontabs dev e2fsprogs etcskel fileutils findutils getty_ps grep gzip hdparm info initscripts isapnptools kernel less ldconfig logrotate losetup man mingetty modutils mount net-tools passwd procmail procps psmisc mandrake-release rootfiles rpm sash ash setserial shadow-utils sh-utils stat sysklogd tar termcap textutils time tmpwatch util-linux vim-minimal vixie-cron which perl-base msec) ],
-    base_i386 => [ "lilo", "mkbootdisk" ],
-    base_alpha => [ "aboot" ],
+    base => [ qw(basesystem sed initscripts console-tools utempter ldconfig chkconfig ntsysv setup filesystem SysVinit bdflush crontabs dev e2fsprogs etcskel fileutils findutils getty_ps grep gzip hdparm info initscripts kernel less ldconfig logrotate losetup man mingetty modutils mount net-tools passwd procmail procps psmisc mandrake-release rootfiles rpm sash ash setserial shadow-utils sh-utils stat sysklogd tar termcap textutils time tmpwatch util-linux vim-minimal vixie-cron which perl-base msec) ],
+    base_i386 => [ "lilo", "mkbootdisk", "isapnptools" ],
+    base_alpha => [ "aboot", "isapnptools" ],
+    base_sparc => [ "silo", "mkbootdisk" ],
 
 #- for the list of fields available for user and superuser, see @etc_pass_fields in install_steps.pm
 #-    intf => [ { DEVICE => "eth0", IPADDR => '1.2.3.4', NETMASK => '255.255.255.128' } ],
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index f39b3fb0b..f868bfeae 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -564,17 +564,29 @@ sub createBootdisk($) {
 
     return if $::testing;
 
-    require lilo;
-    lilo::mkbootdisk($o->{prefix}, install_any::kernelVersion(), $dev, $o->{bootloader}{perImageAppend});
-    $o->{mkbootdisk} = $dev;
+    if (arch() =~ /^sparc/) {
+	require silo;
+        silo::mkbootdisk($o->{prefix}, install_any::kernelVersion(), $dev, $o->{bootloader}{perImageAppend});
+	$o->{mkbootdisk} = $dev;
+    } else {
+	require lilo;
+        lilo::mkbootdisk($o->{prefix}, install_any::kernelVersion(), $dev, $o->{bootloader}{perImageAppend});
+	$o->{mkbootdisk} = $dev;
+    }
 }
 
 #------------------------------------------------------------------------------
 sub readBootloaderConfigBeforeInstall {
     my ($o) = @_;
     my ($image, $v);
-    require lilo;
-    add2hash($o->{bootloader} ||= {}, lilo::read($o->{prefix}, "/etc/lilo.conf"));
+
+    if (arch() =~ /^sparc/) {
+	require silo;
+	add2hash($o->{bootloader} ||= {}, silo::read($o->{prefix}, "/etc/silo.conf"));
+    } else {
+	require lilo;
+	add2hash($o->{bootloader} ||= {}, lilo::read($o->{prefix}, "/etc/lilo.conf"));
+    }
 
     #- since kernel or kernel-smp may not be upgraded, it should be checked
     #- if there is a need to update existing lilo.conf entries by using that
@@ -602,15 +614,25 @@ sub readBootloaderConfigBeforeInstall {
 
 sub setupBootloaderBefore {
     my ($o) = @_;
-    require lilo;
-    lilo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion());
-    $o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
+    if (arch() =~ /^sparc/) {
+	require silo;
+        silo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion());
+    } else {
+	require lilo;
+        lilo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion());
+	$o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
+    }
 }
 
 sub setupBootloader($) {
     my ($o) = @_;
     return if $::g_auto_install;
-    lilo::install($o->{prefix}, $o->{bootloader});
+
+    if (arch() =~ /^sparc/) {
+        silo::install($o->{prefix}, $o->{bootloader});
+    } else {
+        lilo::install($o->{prefix}, $o->{bootloader});
+    }
 }
 
 #------------------------------------------------------------------------------
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
index ce374c433..4ad02d116 100644
--- a/perl-install/install_steps_gtk.pm
+++ b/perl-install/install_steps_gtk.pm
@@ -181,7 +181,7 @@ sub new($$) {
 		my $ok = 1;
 		local $SIG{CHLD} = sub { $ok = 0 };
 		unless (fork) {
-		    exec $_[0], "-kb", "-dpms","-s" ,"240", "-allowMouseOpenFail", "-xf86config", $f or exit 1;
+		    exec $_[0], (arch() =~ /^sparc/ ? () : ("-kb")), "-dpms","-s" ,"240", "-allowMouseOpenFail", "-xf86config", $f or exit 1;
 		}
 		foreach (1..15) {
 		    sleep 1;
@@ -192,6 +192,7 @@ sub new($$) {
 	    };
 	    my @servers = qw(FBDev VGA16);
 	    @servers = qw(FBDev 3DLabs TGA) if arch() eq "alpha";
+	    @servers = qw(Mach64) if arch() =~ /^sparc/;
 
 	    foreach (@servers) {
 		log::l("Trying with server $_");
@@ -221,6 +222,8 @@ sub new($$) {
     install_theme($o);
     create_logo_window($o);
 
+#    eval { sleep 10; run_command::run('xhost+') }; #- for testing
+
     $my_gtk::force_center = [ $width - $windowwidth, $logoheight, $windowwidth, $windowheight ];
 
     (bless {}, ref $type || $type)->SUPER::new($o);
@@ -802,7 +805,7 @@ END
 
     local *F;
     open F, ">$file" or die "can't create X configuration file $file";
-    print F <<END;
+    print F <<END_KEYB;
 Section "Files"
    FontPath   "/usr/X11R6/lib/X11/fonts:unscaled,/usr/X11R6/lib/X11/fonts"
 EndSection
@@ -815,6 +818,22 @@ Section "Keyboard"
    RightAlt        Meta
    ScrollLock      Compose
    RightCtl        Control
+END_KEYB
+
+    if (arch() =~ /^sparc/) {
+	print F <<END_KEYB_SPARC;
+    XkbRules    "sun"
+    XkbModel    "sun"
+    XkbLayout   "us"
+    XkbCompat   "compat/complete"
+    XkbTypes    "types/complete"
+    XkbKeycodes "sun(type5)"
+    XkbGeometry "sun(type5)"
+    XkbSymbols  "sun/us(sun5)"
+END_KEYB_SPARC
+    }
+
+    print F <<END;
 EndSection
 
 Section "Pointer"
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index be0c64839..075fe4252 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -686,14 +686,7 @@ failures. Would you like to create a bootdisk for your system?"),
 }
 
 #------------------------------------------------------------------------------
-sub setupBootloaderBefore {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Preparing bootloader"));
-    $o->SUPER::setupBootloaderBefore($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
+sub setupLILO {
     my ($o, $more) = @_;
     my $b = $o->{bootloader};
 
@@ -822,6 +815,131 @@ _("Default") => { val => \$default, type => 'bool' },
 }
 
 #------------------------------------------------------------------------------
+sub setupSILO {
+    my ($o, $more) = @_;
+    my $b = $o->{bootloader};
+
+    #- assume this default parameters.
+    $b->{root} = "/dev/" . fsedit::get_root($o->{fstab})->{device};
+    $b->{partition} = ($b->{root} =~ /\D*(\d*)/)[0] || '1';
+
+    if ($::beginner && $more == 1) {
+	#- nothing more to do here.
+    } elsif ($more || !$::beginner) {
+	$o->set_help("setupBootloaderGeneral");
+
+	$::expert and $o->ask_yesorno('', _("Do you want to use SILO?"), 1) || return;
+
+	my @l = (
+_("Delay before booting default image") => \$b->{timeout},
+$o->{security} < 4 ? () : (
+_("Password") => { val => \$b->{password}, hidden => 1 },
+_("Password (again)") => { val => \$b->{password2}, hidden => 1 },
+_("Restrict command line options") => { val => \$b->{restricted}, type => "bool", text => _("restrict") },
+)
+	);
+
+	$o->ask_from_entries_refH('', _("SILO main options"), \@l,
+				 complete => sub {
+#-				     $o->{security} > 4 && length($b->{password}) < 6 and $o->ask_warn('', _("At this level of security, a password (and a good one) in silo is requested")), return 1;
+				     $b->{restricted} && !$b->{password} and $o->ask_warn('', _("Option ``Restrict command line options'' is of no use without a password")), return 1;
+				     $b->{password} eq $b->{password2} or !$b->{restricted} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return 1;
+				     0;
+				 }
+				) or return;
+    }
+
+    until ($::beginner && $more <= 1) {
+	$o->set_help('setupBootloaderAddEntry');
+	my $c = $o->ask_from_list_([''], 
+_("Here are the following entries in SILO.
+You can add some more or change the existing ones."),
+		[ (sort @{[map_each { "$::b->{label} ($::a)" . ($b->{default} eq $::b->{label} && "  *") } %{$b->{entries}}]}), __("Add"), __("Done") ],
+	);
+	$c eq "Done" and last;
+
+	my ($e, $name);
+
+	if ($c eq "Add") {
+	    my @labels = map { $_->{label} } values %{$b->{entries}};
+	    my $prefix;
+
+	    $e = { type => 'image' };
+	    $prefix = "linux";
+
+	    $e->{label} = $prefix;
+	    for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
+	} else {
+	    ($name) = $c =~ /\((.*?)\)/;
+	    $e = $b->{entries}{$name};
+	}
+	my $old_name = $name;
+	my %old_e = %$e;
+	my $default = my $old_default = $e->{label} eq $b->{default};
+	    
+	my @l;
+	if ($e->{type} eq "image") { 
+	    @l = (
+_("Image") => { val => \$name, list => [ eval { glob_("/boot/vmlinuz*") } ] },
+_("Partition") => { val => \$e->{partition}, list => [ map { ("/dev/$_->{device}" =~ /\D*(\d*)/)[0] || 1} @{$o->{fstab}} ], not_edit => !$::expert },
+_("Root") => { val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @{$o->{fstab}} ], not_edit => !$::expert },
+_("Append") => \$e->{append},
+_("Initrd") => { val => \$e->{initrd}, list => [ eval { glob_("/boot/initrd*") } ] },
+_("Read-write") => { val => \$e->{'read-write'}, type => 'bool' }
+	    );
+	    @l = @l[0..7] unless $::expert;
+	} else {
+	    die "Other SILO entries not supported at the moment";
+	}
+	@l = (
+_("Label") => \$e->{label},
+@l,
+_("Default") => { val => \$default, type => 'bool' },
+	);
+
+	if ($o->ask_from_entries_refH($c eq "Add" ? '' : ['', _("Ok"), _("Remove entry")], 
+	    '', \@l,
+	    complete => sub {
+		$e->{label} or $o->ask_warn('', _("Empty label not allowed")), return 1;
+		member($e->{label}, map { $_->{label} } grep { $_ != $e } values %{$b->{entries}}) and $o->ask_warn('', _("This label is already in use")), return 1;
+			    $name ne $old_name && $b->{entries}{$name} and $o->ask_warn('', _("A entry %s already exists", $name)), return 1;
+			   }
+		)) {
+	    $b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
+	    
+	    delete $b->{entries}{$old_name};
+	    $b->{entries}{$name} = $e;
+	} else {
+	    delete $b->{entries}{$old_name};	    
+	}
+    }
+    eval { $o->SUPER::setupBootloader };
+    if ($@) {
+	$o->ask_warn('', 
+		     [ _("Installation of SILO failed. The following error occured:"),
+		       grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
+	unlink "$o->{prefix}/tmp/.error";
+	die "already displayed";
+    }
+}
+
+#------------------------------------------------------------------------------
+sub setupBootloaderBefore {
+    my ($o) = @_;
+    my $w = $o->wait_message('', _("Preparing bootloader"));
+    $o->SUPER::setupBootloaderBefore($o);
+}
+
+#------------------------------------------------------------------------------
+sub setupBootloader {
+    if (arch() =~ /^sparc/) {
+	&setupSILO;
+    } else {
+	&setupLILO;
+    }
+}
+
+#------------------------------------------------------------------------------
 sub miscellaneousNetwork {
     my ($o, $clicked) = @_;
     my $u = $o->{miscellaneous} ||= {};
diff --git a/perl-install/keyboard.pm b/perl-install/keyboard.pm
index 16fe92369..cb963c4d4 100644
--- a/perl-install/keyboard.pm
+++ b/perl-install/keyboard.pm
@@ -85,6 +85,19 @@ my %lang2keyboard =
 #- key = extension for Xmodmap file, [0] = description of the keyboard,
 #- [1] = name for loadkeys, [2] = name for XKB
 my %keyboards = (
+arch() =~ /^sparc/ ? (
+ "cs" => [ __("Czech"),          "sunt5-us-cz", "cs" ],
+ "de" => [ __("German"),         "sunt5-de-latin1", "de" ],
+ "dvorak" => [ __("Dvorak"),     "sundvorak",   "dvorak" ],
+ "es" => [ __("Spanish"),        "sunt5-es",    "es" ],
+ "fi" => [ __("Finnish"),        "sunt5-fi-latin1", "fi" ],
+ "fr" => [ __("French"),         "sunt5-fr-latin1", "fr" ],
+ "no" => [ __("Norwegian"),      "sunt4-no-latin1", "no" ],
+ "pl" => [ __("Polish"),         "sun-pl-altgraph", "pl" ],
+ "ru" => [ __("Russian"),        "sunt5-ru",    "ru" ],
+ "uk" => [ __("UK keyboard"),    "sunt5-uk",    "us" ],
+ "us" => [ __("US keyboard"),    "sunkeymap",   "us" ],
+) : (
  "am" => [ __("Armenian"),       "am-armscii8", "am" ],
  "be" => [ __("Belgian"),        "be-latin1",   "be" ],
  "bg" => [ __("Bulgarian"),      "bg",          "bg" ],
@@ -130,6 +143,7 @@ my %keyboards = (
  "us" => [ __("US keyboard"),    "us",           "us" ],
  "us_intl" => [ __("US keyboard (international)"), "us-latin1", "us_intl" ],
  "yu" => [ __("Yugoslavian (latin layout)"), "sr", "yu" ],
+),
 );
 
 #-######################################################################################
@@ -151,10 +165,12 @@ sub text2keyboard {
 
 sub lang2keyboard($) {
     local ($_) = @_;
-    $lang2keyboard{$_} || $keyboards{$_} && $_ || "us"; #-substr($_, 0, 2);
+    my $kb = $lang2keyboard{$_} || $keyboards{$_} && $_ || "us";
+    $keyboards{$kb} ? $kb : "us"; #- handle incorrect keyboad mapping to us.
 }
 
 sub load($) {
+    return if arch() =~ /^sparc/;
     my ($keymap) = @_;
 
     my ($magic, @keymaps) = unpack "I i" . c::MAX_NR_KEYMAPS() . "a*", $keymap;
@@ -207,7 +223,7 @@ sub setup($) {
 	eval { load(<F>) };
     }
     my $f = xmodmap_file($keyboard);
-    eval { run_program::run('xmodmap', $f) } unless $::testing || !$f;
+    #eval { run_program::run('xmodmap', $f) } unless $::testing || !$f;
 }
 
 sub write($$;$) {
diff --git a/perl-install/list.sparc b/perl-install/list.sparc
new file mode 100644
index 000000000..d35feefa2
--- /dev/null
+++ b/perl-install/list.sparc
@@ -0,0 +1,73 @@
+/bin/ash
+/bin/cpio
+/lib/libnss_nis.so.2
+/lib/libnss_files.so.2
+/lib/libnss_dns.so.2
+/lib/libresolv.so.2
+/etc/protocols
+/sbin/fdisk
+/sbin/ifport
+/sbin/insmod
+/sbin/mkraid
+/sbin/rmmod
+/sbin/mkdosfs
+/sbin/mke2fs
+/sbin/raidstart
+/usr/bin/bzip2
+/usr/bin/perl
+/usr/lib/libimlib-png.so
+/usr/lib/gtk/themes/engines/libpixmap.so
+/usr/lib/gtk/themes/engines/libpixmap.la
+/usr/lib/libimlib-png.so
+/usr/lib/perl5/5.00503/AutoLoader.pm
+/usr/lib/perl5/5.00503/Carp.pm
+/usr/lib/perl5/5.00503/Data/Dumper.pm
+/usr/lib/perl5/5.00503/Exporter.pm
+/usr/lib/perl5/5.00503/FileHandle.pm
+/usr/lib/perl5/5.00503/SelectSaver.pm
+/usr/lib/perl5/5.00503/SelfLoader.pm
+/usr/lib/perl5/5.00503/Symbol.pm
+/usr/lib/perl5/5.00503/Time/Local.pm
+/usr/lib/perl5/5.00503/dumpvar.pl
+/usr/lib/perl5/5.00503/sparc-linux/Config.pm
+/usr/lib/perl5/5.00503/sparc-linux/DynaLoader.pm
+/usr/lib/perl5/5.00503/sparc-linux/Fcntl.pm
+/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.bs
+/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.so
+/usr/lib/perl5/5.00503/sparc-linux/IO/File.pm
+/usr/lib/perl5/5.00503/sparc-linux/IO/Handle.pm
+/usr/lib/perl5/5.00503/sparc-linux/IO/Seekable.pm
+/usr/lib/perl5/5.00503/sparc-linux/IO/Socket.pm
+/usr/lib/perl5/5.00503/sparc-linux/Socket.pm
+/usr/lib/perl5/5.00503/sparc-linux/_h2ph_pre.ph
+/usr/lib/perl5/5.00503/sparc-linux/asm/unistd.ph
+/usr/lib/perl5/5.00503/sparc-linux/asm-sparc/unistd.ph
+/usr/lib/perl5/5.00503/sparc-linux/asm-sparc64/unistd.ph
+/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.bs
+/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.so
+/usr/lib/perl5/5.00503/sparc-linux/auto/IO/IO.so
+/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.bs
+/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.so
+/usr/lib/perl5/5.00503/sparc-linux/bits/syscall.ph
+/usr/lib/perl5/5.00503/sparc-linux/sys/syscall.ph
+/usr/lib/perl5/5.00503/sparc-linux/syscall.ph
+/usr/lib/perl5/5.00503/lib.pm
+/usr/lib/perl5/5.00503/overload.pm
+/usr/lib/perl5/5.00503/strict.pm
+/usr/lib/perl5/5.00503/vars.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk/Types.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Cmd.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Config.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/A.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/I.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/dataconn.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Netrc.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.bs
+/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.so
+/usr/lib/rpm/rpmrc
+/usr/X11R6/bin/XF86_FBDev
+/usr/X11R6/bin/XF86_Mach64
+/usr/X11R6/bin/xmodmap
+/usr/X11R6/lib/modules/xf86Wacom.so
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
index 4aa8a0693..4af311cc8 100644
--- a/perl-install/modules.pm
+++ b/perl-install/modules.pm
@@ -15,39 +15,43 @@ my %deps = ();
 
 my @drivers_by_category = (
 [ 'net', {
+arch() =~ /^sparc/ ? (
+  "myri_sbus" => "MyriCOM Gigabit Ethernet",
+  "sunbmac" => "Sun BigMac Ethernet",
+  "sunhme" => "Sun Happy Meal Ethernet",
+  "sunqe" => "Sun Quad Ethernet",
+) : (
   "3c509" => "3com 3c509",
   "3c501" => "3com 3c501",
   "3c503" => "3com 3c503",
   "3c505" => "3com 3c505",
   "3c507" => "3com 3c507",
   "3c515" => "3com 3c515",
-  "3c59x" => "3com 3c59x (Vortex)",
-  "3c59x" => "3com 3c90x (Boomerang)",
-  "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)",
+  "3c90x" => "3com 3c90x and 3c980",
   "at1700" => "Allied Telesis AT1700",
   "ac3200" => "Ansel Communication AC3200",
   "acenic" => "AceNIC Gigabit Ethernet",
   "pcnet32" => "AMD PC/Net 32",
   "82596" => "Apricot 82596",
 #  "atp" => "ATP", # builtin the kernel
+  "e2100" => "Cabletron E2100",
+  "tlan" => "Compaq Netelligent",
   "cs89x0" => "CS89x0",
-  "de4x5" => "Digital 425,434,435,450,500",
+  "de600" => "D-Link DE-600 pocket adapter",
+  "de620" => "D-Link DE-620 pocket adapter",
+  "dgrs" => "Digi International RightSwitch",
   "depca" => "Digital DEPCA and EtherWORKS",
-  "e2100" => "Cabletron E2100",
   "ewrk3" => "Digital EtherWORKS 3",
   "old_tulip" => "Digital 21040/21041/21140 (old Tulip driver)",
   "tulip" => "Digital 21040/21041/21140 (Tulip)",
-  "de600" => "D-Link DE-600 pocket adapter",
-  "de620" => "D-Link DE-620 pocket adapter",
-  "dgrs" => "Digi International RightSwitch",
+  "eth16i" => "ICL EtherTeam 16i",
   "epic100" => "EPIC 100",
+  "eexpress" => "Intel EtherExpress",
+  "eepro" => "Intel EtherExpress Pro",
+  "eepro100" => "Intel EtherExpress Pro 100", #- should run on sparc but no memory on floppy
   "hp100" => "HP10/100VG any LAN ",
   "hp" => "HP LAN/AnyLan",
   "hp-plus" => "HP PCLAN/plus",
-  "eth16i" => "ICL EtherTeam 16i",
-  "eexpress" => "Intel EtherExpress",
-  "eepro" => "Intel EtherExpress Pro",
-  "eepro100" => "Intel EtherExpress Pro 100",
   "lance" => "Lance",
   "lne390" => "Mylex LNE390",
   "ne" => "NE2000 and compatible",
@@ -56,24 +60,19 @@ my @drivers_by_category = (
   "ni5010" => "NI 5010",
   "ni52" => "NI 5210",
   "ni65" => "NI 6510",
-  "rtl8139" => "RealTek RTL8129/8139",
   "es3210" => "Racal-Interlan ES3210",
-#  "rcpci" => "RedCreek Virtual Private Network", # TODO
+  "rcpci45" => "RedCreek PCI45 LAN",
   "epic100" => "SMC 83c170 EPIC/100",
   "sktr" => "Syskonnect Token ring adaptor",
   "smc9194" => "SMC 9000 series",
   "smc-ultra" => "SMC Ultra",
   "smc-ultra32" => "SMC Ultra 32",
-#  "sunhme" => "Sun Happy Meal", # not there anymore?
-  "tlan" => "Compaq Netelligent",
+  "yellowfin" => "Symbios Yellowfin G-NIC",
   "via-rhine" => "VIA Rhine",
-#  "wavelan" => "AT&T WaveLAN & DEC RoamAbout DS", # TODO
+#  "wavelan" => "AT&T WaveLAN & DEC RoamAbout DS", # TODO is a "AT&T GIS WaveLAN ISA" ?
   "wd" => "WD8003, WD8013 and compatible",
-  "yellowfin" => "Symbios Yellowfin G-NIC",
 
-  "8390" => "8390",
   "dmfe" => "dmfe",
-  "dummy" => "dummy",
   "fmv18x" => "fmv18x",
   "ibmtr" => "Token Ring Tropic",
   "olympic" => "olympic",
@@ -82,15 +81,24 @@ my @drivers_by_category = (
   "sb1000" => "sb1000",
   "sbni" => "sbni",
   "sis900" => "sis900",
+),
+  "3c59x" => "3com 3c59x (Vortex)",
+  "de4x5" => "Digital 425,434,435,450,500",
+  "rtl8139" => "RealTek RTL8129/8139",
+
+  "8390" => "8390",
+  "dummy" => "dummy",
   "nfs" => "Network File System (nfs)",
   "lockd" => "lockd",
   "sunrpc" => "sunrpc",
 }],
 [ 'scsi', {
+arch() =~ /^sparc/ ? (
+  "qlogicpti" => "Performance Technologies ISP",
+) : (
   "aha152x" => "Adaptec 152x",
   "aha1542" => "Adaptec 1542",
   "aha1740" => "Adaptec 1740",
-  "aic7xxx" => "Adaptec 2740, 2840, 2940",
   "advansys" => "AdvanSys Adapters",
   "in2000" => "Always IN2000",
   "AM53C974" => "AMD SCSI",
@@ -102,12 +110,8 @@ my @drivers_by_category = (
   "g_NCR5380" => "NCR 5380",
   "NCR53c406a" => "NCR 53c406a",
   "53c7,8xx" => "NCR 53c7xx",
-  "ncr53c8xx" => "NCR 53C8xx PCI",
-#  "pci2000" => "Perceptive Solutions PCI-2000", # TODO
   "qlogicfas" => "Qlogic FAS",
-  "qlogicisp" => "Qlogic ISP",
   "seagate" => "Seagate ST01/02",
-  "sym53c8xx" => "Symbios 53c8xx",
   "t128" => "Trantor T128/T128F/T228",
   "u14-34f" => "UltraStor 14F/34F",
   "ultrastor" => "UltraStor 14F/24F/34F",
@@ -121,8 +125,17 @@ my @drivers_by_category = (
   "sim710" => "sim710",
   "sym53c416" => "sym53c416",
   "tmscsim" => "tmscsim",
+),
+  "aic7xxx" => "Adaptec 2740, 2840, 2940",
+  "ncr53c8xx" => "NCR 53C8xx PCI",
+#  "pci2000" => "Perceptive Solutions PCI-2000", # TODO
+  "qlogicisp" => "Qlogic ISP",
+  "sym53c8xx" => "Symbios 53c8xx",
 }],
 [ 'disk', {
+arch() =~ /^sparc/ ? (
+  "pluto" => "Sun SparcSTORAGE Array SCSI", #- name it "fc4:soc:pluto" ?
+) : (
   "DAC960" => "Mylex DAC960",
 #  "dpt" => "Distributed Tech SmartCache/Raid I-IV Controller", # not there anymore?
   "megaraid" => "AMI MegaRAID",
@@ -134,8 +147,10 @@ my @drivers_by_category = (
   "eata_dma" => "EATA DMA Adapters",
   "ppa" => "Iomega PPA3 (parallel port Zip)",
   "imm" => "Iomega Zip (new driver)",
+),
 }],
 [ 'cdrom', {
+arch() !~ /^sparc/ ? (
   "sbpcd" => "SoundBlaster/Panasonic",
   "aztcd" => "Aztech CD",
   "gscd" => "Goldstar R420",
@@ -147,10 +162,12 @@ my @drivers_by_category = (
   "sjcd" => "Sanyo",
   "cdu31a" => "Sony CDU-31A",
   "sonycd535" => "Sony CDU-5xx",
+) : (),
   "isofs" => "iso9660",
   "ide-cd" => "ide-cd",
 }],
 [ 'sound', {
+arch() !~ /^sparc/ ? (
   "alsa" => "ALSA sound module, many sound cards",
   "cmpci" => "C-Media Electronics CMI8338A CMI8338B CMI8738",
   "es1370" => "Ensoniq ES1370 [AudioPCI]",
@@ -161,8 +178,10 @@ my @drivers_by_category = (
   "pas16" => "Pro Audio Spectrum/Studio 16",
   "via82cxxx" => "VIA VT82C686_5",
   "sonicvibes" => "S3 SonicVibes",
+) : (),
 }],
 [ 'pcmcia', {
+arch() !~ /^sparc/ ? (
   "ide_cs" => "ide_cs",
   "fmvj18x_cs" => "fmvj18x_cs",
   "fdomain_cs" => "fdomain_cs",
@@ -193,14 +212,18 @@ my @drivers_by_category = (
   "sram_mtd" => "sram_mtd",
   "tulip_cb" => "tulip_cb",
 
+) : (),
 }],
 [ 'pcmcia_everywhere', {
+arch() !~ /^sparc/ ? (
   "pcmcia_core" => "PCMCIA core support",
   "tcic" => "PCMCIA tcic controller",
   "ds" => "PCMCIA card support",
   "i82365" => "PCMCIA i82365 controller",
+) : (),
 }],
 [ 'paride', {
+arch() !~ /^sparc/ ? (
   "aten" => "ATEN EH-100",
   "bpck" => "Microsolutions backpack",
   "comm" => "DataStor (older type) commuter adapter",
@@ -219,6 +242,7 @@ my @drivers_by_category = (
   "pcd"  => "Parallel port CD-ROM",
   "pf"   => "Parallel port ATAPI disk",
   "paride" => "Main parallel port module",
+) : (),
 }],
 [ 'raid', {
   "linear" => "linear",
@@ -227,6 +251,7 @@ my @drivers_by_category = (
   "raid5" => "raid5",
 }],
 [ 'mouse', {
+arch() !~ /^sparc/ ? (
   "busmouse" => "busmouse",
   "msbusmouse" => "msbusmouse",
   "serial" => "serial",
@@ -236,6 +261,7 @@ my @drivers_by_category = (
   "usb-uhci", "USB (uhci)",
   "usb-ohci", "USB (ohci)",
   "usb-ohci-hcd", "USB (ohci-hcd)",
+) : (),
 }],
 [ 'fs', {
   "smbfs" => "Windows SMB",
diff --git a/perl-install/mouse.pm b/perl-install/mouse.pm
index d884f8db5..cf21d68fb 100644
--- a/perl-install/mouse.pm
+++ b/perl-install/mouse.pm
@@ -17,21 +17,9 @@ use log;
 
 my @mouses_fields = qw(nbuttons device MOUSETYPE XMOUSETYPE FULLNAME);
 my @mouses = (
-  [ 0, "none",  "none",         "Microsoft",      __("No Mouse") ],
-  [ 2, "ttyS",  "pnp",          "Auto",           __("Microsoft Rev 2.1A or higher (serial)") ],
-  [ 3, "ttyS",  "logim",        "MouseMan",       __("Logitech CC Series (serial)") ],
-  [ 5, "ttyS",  "pnp",          "IntelliMouse",   __("Logitech MouseMan+/FirstMouse+ (serial)") ],
-  [ 5, "ttyS",  "ms3",          "IntelliMouse",   __("ASCII MieMouse (serial)") ],
-  [ 5, "ttyS",  "ms3",          "IntelliMouse",   __("Genius NetMouse (serial)") ],
-  [ 5, "ttyS",  "ms3",          "IntelliMouse",   __("Microsoft IntelliMouse (serial)") ],
-  [ 2, "ttyS",  "MMSeries",     "MMSeries",       __("MM Series (serial)") ],
-  [ 2, "ttyS",  "MMHitTab",     "MMHittab",       __("MM HitTablet (serial)") ],
-  [ 3, "ttyS",  "Logitech",     "Logitech",       __("Logitech Mouse (serial, old C7 type)") ],
-  [ 3, "ttyS",  "MouseMan",     "MouseMan",       __("Logitech MouseMan/FirstMouse (serial)") ],
-  [ 2, "ttyS",  "Microsoft",    "Microsoft",  	  __("Generic Mouse (serial)") ],
-  [ 2, "ttyS",  "Microsoft",    "Microsoft",      __("Microsoft compatible (serial)") ],
-  [ 3, "ttyS",  "Microsoft",    "Microsoft",  	  __("Generic 3 Button Mouse (serial)") ],
-  [ 2, "ttyS",  "MouseSystems", "MouseSystems",   __("Mouse Systems (serial)") ],
+arch() =~ /^sparc/ ? (
+  [ 3, "sunmouse", "sun",       "sun",            __("Sun - Mouse") ],
+) : (
   [ 2, "psaux", "ps/2",         "PS/2",           __("Generic Mouse (PS/2)") ],
   [ 3, "psaux", "ps/2",         "PS/2",           __("Logitech MouseMan/FirstMouse (ps/2)") ],
   [ 3, "psaux", "ps/2",         "PS/2",           __("Generic 3 Button Mouse (PS/2)") ],
@@ -48,6 +36,22 @@ my @mouses = (
   [ 3, "logibm",   "Busmouse",  "BusMouse",       __("Logitech Bus Mouse") ],
   [ 2, "usbmouse", "ps/2",      "PS/2",           __("USB Mouse") ],
   [ 3, "usbmouse", "ps/2",      "PS/2",           __("USB Mouse (3 buttons or more)") ],
+),
+  [ 0, "none",  "none",         "Microsoft",      __("No Mouse") ],
+  [ 2, "ttyS",  "pnp",          "Auto",           __("Microsoft Rev 2.1A or higher (serial)") ],
+  [ 3, "ttyS",  "logim",        "MouseMan",       __("Logitech CC Series (serial)") ],
+  [ 5, "ttyS",  "pnp",          "IntelliMouse",   __("Logitech MouseMan+/FirstMouse+ (serial)") ],
+  [ 5, "ttyS",  "ms3",          "IntelliMouse",   __("ASCII MieMouse (serial)") ],
+  [ 5, "ttyS",  "ms3",          "IntelliMouse",   __("Genius NetMouse (serial)") ],
+  [ 5, "ttyS",  "ms3",          "IntelliMouse",   __("Microsoft IntelliMouse (serial)") ],
+  [ 2, "ttyS",  "MMSeries",     "MMSeries",       __("MM Series (serial)") ],
+  [ 2, "ttyS",  "MMHitTab",     "MMHittab",       __("MM HitTablet (serial)") ],
+  [ 3, "ttyS",  "Logitech",     "Logitech",       __("Logitech Mouse (serial, old C7 type)") ],
+  [ 3, "ttyS",  "MouseMan",     "MouseMan",       __("Logitech MouseMan/FirstMouse (serial)") ],
+  [ 2, "ttyS",  "Microsoft",    "Microsoft",  	  __("Generic Mouse (serial)") ],
+  [ 2, "ttyS",  "Microsoft",    "Microsoft",      __("Microsoft compatible (serial)") ],
+  [ 3, "ttyS",  "Microsoft",    "Microsoft",  	  __("Generic 3 Button Mouse (serial)") ],
+  [ 2, "ttyS",  "MouseSystems", "MouseSystems",   __("Mouse Systems (serial)") ],
 );
 map_index {
     my %l; @l{@mouses_fields} = @$_;
@@ -109,6 +113,8 @@ sub mouseconfig {
 }
 
 sub detect() {
+    return name2mouse("Sun - Mouse") if arch() =~ /^sparc/;
+
     detect_devices::hasMousePS2 and return name2mouse("Generic Mouse (PS/2)");
 
     eval { commands::modprobe("serial") };
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
index c3e0da79e..f7e1d55ad 100644
--- a/perl-install/partition_table.pm
+++ b/perl-install/partition_table.pm
@@ -25,6 +25,16 @@ use Data::Dumper;
 
 my %types = (
   0x0 => 'Empty',
+arch() =~ /^sparc/ ? (
+  0x1 => 'SunOS boot',
+  0x2 => 'SunOS root',
+  0x3 => 'SunOS swap',
+  0x4 => 'SunOS usr',
+  0x5 => 'Whole disk',
+  0x6 => 'SunOS stand',
+  0x7 => 'SunOS var',
+  0x8 => 'SunOS home',
+) : (
   0x1 => 'DOS 12-bit FAT',
   0x2 => 'XENIX root',
   0x3 => 'XENIX /usr',
@@ -33,6 +43,7 @@ my %types = (
   0x6 => 'DOS FAT16',
   0x7 => 'OS/2 IFS (e.g., HPFS) / Windows NT NTFS / Advanced Unix / QNX2.x pre-1988 (see below under IDs 4d-4f)',
   0x8 => 'OS/2 (v1.0-1.3 only) / AIX boot partition / SplitDrive / Commodore DOS / DELL partition spanning multiple drives / QNX 1.x and 2.x ("qny")',
+),
   0x9 => 'AIX data partition / Coherent filesystem / QNX 1.x and 2.x ("qnz")',
   0xa => 'OS/2 Boot Manager / Coherent swap partition / OPUS',
   0xb => 'Win98 FAT32',
@@ -140,11 +151,13 @@ my %types = (
 );
 
 my %type2fs = (
+arch() !~ /^sparc/ ? (
   0x01 => 'vfat',
   0x04 => 'vfat',
   0x05 => 'ignore',
   0x06 => 'vfat',
   0x07 => 'hpfs',
+) : (),
   0x0b => 'vfat',
   0x0c => 'vfat',
   0x0e => 'vfat',
@@ -171,7 +184,8 @@ sub name2type($) {
     /0x(.*)/ ? hex $1 : $types_rev{$_} || $_;
 }
 
-sub isExtended($) { $_[0]{type} == 5 || $_[0]{type} == 0xf || $_[0]{type} == 0x85 }
+sub isWholedisk($) { arch() =~ /^sparc/ && $_[0]{type} == 5 }
+sub isExtended($) { (arch() !~ /^sparc/ && $_[0]{type} == 5) || $_[0]{type} == 0xf || $_[0]{type} == 0x85 }
 sub isRAID($) { $_[0]{type} == 0xfd }
 sub isSwap($) { $type2fs{$_[0]{type}} eq 'swap' }
 sub isExt2($) { $type2fs{$_[0]{type}} eq 'ext2' }
@@ -211,8 +225,10 @@ sub adjustEnd($$) {
     $part->{size} = $end2 - $part->{start};
 }
 sub adjustStartAndEnd($$) {
-    &adjustStart;
-    &adjustEnd;
+    my ($hd, $part) = @_;
+
+    $hd->adjustStart($part);
+    $hd->adjustEnd($part);
 }
 
 sub verifyNotOverlap($$) {
@@ -225,9 +241,14 @@ sub verifyInside($$) {
 }
 
 sub verifyParts_ {
-    foreach my $i (@_) { foreach (@_) {
-	$i != $_ and verifyNotOverlap($i, $_) || cdie sprintf "partitions sector #$i->{start} (%dMB) and sector #$_->{start} (%dMB) are overlapping!", $i->{size} >> 9, $_->{size} >> 9;
-    }}
+    foreach my $i (@_) {
+	foreach (@_) {
+	    next if !$i || !$_ || $i == $_ || isWholedisk($i); #- avoid testing twice on whole disk for simplicity :-)
+	    isWholedisk($_) ?
+		verifyInside($i, $_) || cdie sprintf "partitions sector #$i->{start} (%dMB) is not inside whole disk (%dMB)!", $i->{size} >> 9, $_->{size} >> 9:
+		verifyNotOverlap($i, $_) || cdie sprintf "partitions sector #$i->{start} (%dMB) and sector #$_->{start} (%dMB) are overlapping!", $i->{size} >> 9, $_->{size} >> 9;
+	}
+    }
 }
 sub verifyParts($) {
     my ($hd) = @_;
@@ -235,7 +256,7 @@ sub verifyParts($) {
 }
 sub verifyPrimary($) {
     my ($pt) = @_;
-    $_->{start} > 0 || arch() eq "sparc" || die "partition must NOT start at sector 0" foreach @{$pt->{normal}};
+    $_->{start} > 0 || arch() =~ /^sparc/ || die "partition must NOT start at sector 0" foreach @{$pt->{normal}};
     verifyParts_(@{$pt->{normal}}, $pt->{extended});
 }
 
@@ -338,7 +359,6 @@ sub read_one($$) {
 	    bless $hd, "partition_table_$_";
 	    ($pt, $info) = $hd->read($sector);
 	};
-	print ">>> $@\n";
 	$@ or last;
     }
 
@@ -416,7 +436,8 @@ sub write($) {
 	$_->{normal}{local_start} = $_->{normal}{start} - $_->{start};
 	$_->{extended} and $_->{extended}{local_start} = $_->{extended}{start} - $hd->{primary}{extended}{start};
 
-	$hd->write($_->{start}, $_->{raw}) or die "writing of partition table failed";
+	print "Trying to write an extended partition table, bad !!!\n";
+	#$hd->write($_->{start}, $_->{raw}) or die "writing of partition table failed";
     }
     $hd->{isDirty} = 0;
 
@@ -535,7 +556,7 @@ sub add($$;$$) {
     $part->{isFormatted} = 0;
     $part->{rootDevice} = $hd->{device};
     $hd->{isDirty} = $hd->{needKernelReread} = 1;
-    $part->{start} ||= 1; #- starting at sector 0 is not allowed
+    $part->{start} ||= 1 if arch() !~ /^sparc/; #- starting at sector 0 is not allowed
     adjustStartAndEnd($hd, $part) unless $forceNoAdjust;
 
     my $e = $hd->{primary}{extended};
diff --git a/perl-install/partition_table_bsd.pm b/perl-install/partition_table_bsd.pm
index f3134f4fb..c0af9cf48 100644
--- a/perl-install/partition_table_bsd.pm
+++ b/perl-install/partition_table_bsd.pm
@@ -56,6 +56,14 @@ my $magic = 0x82564557;
 my $nb_primary = 8;
 my $offset = 0x40;
 
+#- use default partition table adust functions.
+sub adjustStart($$) {
+    &partition_table::adjustStart;
+}
+sub adjustEnd($$) {
+    &partition_table::adjustEnd;
+}
+
 sub read($$) {
     my ($hd, $sector) = @_;
     my $tmp;
@@ -89,8 +97,15 @@ sub read($$) {
 sub write($$$;$) {
     my ($hd, $sector, $pt, $info) = @_;
 
-    local *F; partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-    c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+    #- handle testing for writing partition table on file only!
+    local *F;
+    if ($::testing) {
+	my $file = "/tmp/partition_table_$hd->{device}";
+	open F, ">$file" or die "error opening test file $file";
+    } else {
+	partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+        c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+    }
 
     #- TODO compute checksum
 
diff --git a/perl-install/partition_table_dos.pm b/perl-install/partition_table_dos.pm
index 1b25a8f0b..624f13ecf 100644
--- a/perl-install/partition_table_dos.pm
+++ b/perl-install/partition_table_dos.pm
@@ -8,6 +8,7 @@ use vars qw(@ISA);
 
 use common qw(:common :system :file);
 use partition_table_raw;
+use partition_table;
 use c;
 
 my @fields = qw(active start_head start_sec start_cyl type end_head end_sec end_cyl start size);
@@ -42,6 +43,14 @@ sub sector2CHS($$) {
     ($start, $h, $s + 1);
 }
 
+#- use default partition table adust functions.
+sub adjustStart($$) {
+    &partition_table::adjustStart;
+}
+sub adjustEnd($$) {
+    &partition_table::adjustEnd;
+}
+
 sub read($$) {
     my ($hd, $sector) = @_;
     my $tmp;
@@ -67,8 +76,15 @@ sub read($$) {
 sub write($$$;$) {
     my ($hd, $sector, $pt) = @_;
 
-    local *F; partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-    c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+    #- handle testing for writing partition table on file only!
+    local *F;
+    if ($::testing) {
+	my $file = "/tmp/partition_table_$hd->{device}";
+	open F, ">$file" or die "error opening test file $file";
+    } else {
+	partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+        c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+    }
 
     @$pt == $nb_primary or die "partition table does not have $nb_primary entries";
     foreach (@$pt) {
diff --git a/perl-install/partition_table_raw.pm b/perl-install/partition_table_raw.pm
index 39277bf39..cafb439f9 100644
--- a/perl-install/partition_table_raw.pm
+++ b/perl-install/partition_table_raw.pm
@@ -40,6 +40,9 @@ sub get_geometry($) {
 
     my %geom; @geom{qw(heads sectors cylinders start)} = unpack "CCSL", $g;
 
+    #- handle this strange but necessary reduction of visible cylinders on sparc, assume 2 for instance.
+    $geom{total_cylinders} = $geom{cylinders}; $geom{cylinders} -= 2 if arch() =~ /^sparc/;
+
     { geom => \%geom, totalsectors => $geom{heads} * $geom{sectors} * $geom{cylinders} };
 }
 
@@ -55,7 +58,7 @@ sub kernel_read($) {
 sub zero_MBR($) {
     my ($hd) = @_;
 #    unless (ref($hd) =~ /partition_table/) {
-	my $type = arch() eq "alpha" ? "bsd" : arch() eq "sparc" ? "sun" : "dos";
+	my $type = arch() eq "alpha" ? "bsd" : arch() =~ /^sparc/ ? "sun" : "dos";
 	bless $hd, "partition_table_$type";
 #    }
     $hd->{isDirty} = $hd->{needKernelReread} = 1;
diff --git a/perl-install/partition_table_sun.pm b/perl-install/partition_table_sun.pm
index 5c8fc749f..808944b8c 100644
--- a/perl-install/partition_table_sun.pm
+++ b/perl-install/partition_table_sun.pm
@@ -45,6 +45,32 @@ my $magic = 0xDABE;
 my $nb_primary = 8;
 my $offset = 0;
 
+sub adjustStart($$) {
+    my ($hd, $part) = @_;
+    my $end = $part->{start} + $part->{size};
+
+    #- since partition must always start on cylinders boundaries on sparc,
+    #- note that if start sector is on the first cylinder, it is adjusted
+    #- to 0 and it is valid.
+    $part->{start} = $part->{start} >= partition_table::cylinder_size() ? round_up($part->{start}, partition_table::cylinder_size($hd)) : 0;
+    $part->{size} = $end - $part->{start};
+}
+sub adjustEnd($$) {
+    &partition_table::adjustEnd;
+}
+
+#- compute crc checksum used for Sun Label partition, expect
+#- $tmp to be the 512 bytes buffer to be read/written to MBR.
+sub compute_crc($) {
+    my ($tmp) = @_;
+    my @l2b = unpack "n256", $tmp;
+    my $crc = 0;
+
+    map { $crc ^= $_ } @l2b;
+
+    $crc;
+}
+
 sub read($$) {
     my ($hd, $sector) = @_;
     my $tmp;
@@ -58,15 +84,17 @@ sub read($$) {
     #- check magic number
     $info{magic}  == $magic or die "bad magic number";
 
+    #- check crc, csum contains the crc so result should be 0.
+    compute_crc($tmp) == 0 or die "bad checksum";
+
     @{$hd->{geom}}{qw(cylinders heads sectors)} = @info{qw(ncyl nsect ntrks)};
 
-    #- TODO verify checksum
     my @pt = mapn {
 	my %h; 
 	@h{@$fields1} = unpack $format1, $_[0];
 	@h{@$fields2} = unpack $format2, $_[1];
 	$h{start} = $sector + $h{start_cylinder} * partition_table::cylinder_size($hd);
-	$h{type} = $typeToDos{$h{type}} || $h{type};
+#	$h{type} = $typeToDos{$h{type}} || $h{type}; #- for rewrite it ?
 	$h{size} or $h{$_} = 0 foreach keys %h;
 	\%h;
     } [ $info{infos} =~ /(.{$size1})/g ], [ $info{partitions} =~ /(.{$size2})/g ];
@@ -79,18 +107,28 @@ sub read($$) {
 sub write($$$;$) {
     my ($hd, $sector, $pt, $info) = @_;
 
-    local *F; partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-    c::lseek_sector(fileno(F), $sector, $offset) or return 0;
-
-    #- TODO compute checksum
+    #- handle testing for writing partition table on file only!
+    local *F;
+    if ($::testing) {
+	my $file = "/tmp/partition_table_$hd->{device}";
+	open F, ">$file" or die "error opening test file $file";
+    } else {
+	partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+        c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+    }
 
     ($info->{infos}, $info->{partitions}) = map { join '', @$_ } list2kv map {
 	$_->{start} % partition_table::cylinder_size($hd) == 0 or die "partition not at beginning of cylinder";
-	local $_->{type} = $typeFromDos{$_->{type}} || $_->{type};
+#	local $_->{type} = $typeFromDos{$_->{type}} || $_->{type};
 	local $_->{start_cylinder} = $_->{start} / partition_table::cylinder_size($hd) - $sector;
 	pack($format1, @$_{@$fields1}), pack($format2, @$_{@$fields2});
     } @$pt;
 
+    #- compute the checksum by building the buffer to write and call compute_crc.
+    #- set csum to 0 so compute_crc will give the right csum value.
+    $info->{csum} = 0;
+    $info->{csum} = compute_crc(pack($main_format, @$info{@$main_fields}));
+
     syswrite F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
 
     1;
@@ -98,31 +136,58 @@ sub write($$$;$) {
 
 sub info {
     my ($hd) = @_;
-    my $dtype_scsi  = 4; #- taken from fdisk, removed unused one,
-    my $dtype_ST506 = 6; #- see fdisk for more
-
-    {
-      magic => $magic,
-      magic2 => $magic,
-      dtype => $hd->{device} =~ /^sd/ ? $dtype_scsi : $dtype_ST506,
-      secsize => $common::SECTORSIZE,
-      ncylinders => $hd->{geom}{cylinders},
-      secpercyl => partition_table::cylinder_size($hd),
-      secprtunit => $hd->{geom}{totalsectors},
-      rpm => 3600,
-      interleave => 1,
-      trackskew => 0,
-      cylskew => 0,
-      headswitch => 0,
-      trkseek => 0,
-      bbsize => 8192, #- size of boot area, with label
-      sbsize => 8192, #- max size of fs superblock
+
+    #- build a default suitable partition table,
+    #- checksum will be built when writing on disk.
+    #- note third partition is ALWAYS of type Whole disk.
+    my $info = {
+	info => "DiskDrake partition table",
+	rspeed => 5400,
+	pcylcount => $hd->{geom}{total_cylinders},
+	sparecyl => 0,
+	ilfact => 1,
+	ncyl => $hd->{geom}{cylinders},
+	nacyl => $hd->{geom}{total_cylinders} - $hd->{geom}{cylinders},
+	ntrks => $hd->{geom}{heads},
+	nsect => $hd->{geom}{sectors},
+	magic => $magic,
     };
+
+    $info;
+#    my $dtype_scsi  = 4; #- taken from fdisk, removed unused one,
+#    my $dtype_ST506 = 6; #- see fdisk for more
+#    {
+#      magic => $magic,
+#      magic2 => $magic,
+#      dtype => $hd->{device} =~ /^sd/ ? $dtype_scsi : $dtype_ST506,
+#      secsize => $common::SECTORSIZE,
+#      ncylinders => $hd->{geom}{cylinders},
+#      secpercyl => partition_table::cylinder_size($hd),
+#      secprtunit => $hd->{geom}{totalsectors},
+#      rpm => 3600,
+#      interleave => 1,
+#      trackskew => 0,
+#      cylskew => 0,
+#      headswitch => 0,
+#      trkseek => 0,
+#      bbsize => 8192, #- size of boot area, with label
+#      sbsize => 8192, #- max size of fs superblock
+#    };
 }
 
 sub clear_raw {
     my ($hd) = @_;
-    { raw => [ ({}) x $nb_primary ], info => info($hd) };
+    my $pt = { raw => [ ({}) x $nb_primary ], info => info($hd) };
+
+    #- handle special case for partition 2 which is whole disk.
+    $pt->{raw}[2] = {
+	type => 5, #- the whole disk type.
+	flags => 0,
+	start_cylinder => 0,
+	size => $hd->{geom}{cylinders} * partition_table::cylinder_size($hd),
+    };
+
+    $pt;
 }
 
 1;
diff --git a/perl-install/share/list b/perl-install/share/list
index 65524be90..60952d68d 100644
--- a/perl-install/share/list
+++ b/perl-install/share/list
@@ -29,47 +29,45 @@
 /usr/lib/perl5/5.00503/Symbol.pm
 /usr/lib/perl5/5.00503/Time/Local.pm
 /usr/lib/perl5/5.00503/dumpvar.pl
-/usr/lib/perl5/5.00503/ARCH-linux/Config.pm
-/usr/lib/perl5/5.00503/ARCH-linux/DynaLoader.pm
-/usr/lib/perl5/5.00503/ARCH-linux/Fcntl.pm
-/usr/lib/perl5/5.00503/ARCH-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/5.00503/ARCH-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/5.00503/ARCH-linux/IO/File.pm
-/usr/lib/perl5/5.00503/ARCH-linux/IO/Handle.pm
-/usr/lib/perl5/5.00503/ARCH-linux/IO/Seekable.pm
-/usr/lib/perl5/5.00503/ARCH-linux/IO/Socket.pm
-/usr/lib/perl5/5.00503/ARCH-linux/Socket.pm
-/usr/lib/perl5/5.00503/ARCH-linux/_h2ph_pre.ph
-/usr/lib/perl5/5.00503/ARCH-linux/asm/unistd.ph
-/usr/lib/perl5/5.00503/ARCH-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/5.00503/ARCH-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/5.00503/ARCH-linux/auto/IO/IO.so
-/usr/lib/perl5/5.00503/ARCH-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/5.00503/ARCH-linux/auto/Socket/Socket.so
-/usr/lib/perl5/5.00503/ARCH-linux/bits/syscall.ph
-/usr/lib/perl5/5.00503/ARCH-linux/sys/syscall.ph
-/usr/lib/perl5/5.00503/ARCH-linux/syscall.ph
+/usr/lib/perl5/5.00503/i386-linux/Config.pm
+/usr/lib/perl5/5.00503/i386-linux/DynaLoader.pm
+/usr/lib/perl5/5.00503/i386-linux/Fcntl.pm
+/usr/lib/perl5/5.00503/i386-linux/auto/Fcntl/Fcntl.bs
+/usr/lib/perl5/5.00503/i386-linux/auto/Fcntl/Fcntl.so
+/usr/lib/perl5/5.00503/i386-linux/IO/File.pm
+/usr/lib/perl5/5.00503/i386-linux/IO/Handle.pm
+/usr/lib/perl5/5.00503/i386-linux/IO/Seekable.pm
+/usr/lib/perl5/5.00503/i386-linux/IO/Socket.pm
+/usr/lib/perl5/5.00503/i386-linux/Socket.pm
+/usr/lib/perl5/5.00503/i386-linux/_h2ph_pre.ph
+/usr/lib/perl5/5.00503/i386-linux/asm/unistd.ph
+/usr/lib/perl5/5.00503/i386-linux/auto/Data/Dumper/Dumper.bs
+/usr/lib/perl5/5.00503/i386-linux/auto/Data/Dumper/Dumper.so
+/usr/lib/perl5/5.00503/i386-linux/auto/IO/IO.so
+/usr/lib/perl5/5.00503/i386-linux/auto/Socket/Socket.bs
+/usr/lib/perl5/5.00503/i386-linux/auto/Socket/Socket.so
+/usr/lib/perl5/5.00503/i386-linux/bits/syscall.ph
+/usr/lib/perl5/5.00503/i386-linux/sys/syscall.ph
+/usr/lib/perl5/5.00503/i386-linux/syscall.ph
 /usr/lib/perl5/5.00503/lib.pm
 /usr/lib/perl5/5.00503/overload.pm
 /usr/lib/perl5/5.00503/strict.pm
 /usr/lib/perl5/5.00503/vars.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Gtk.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/5.005/ARCH-linux/auto/Gtk/Gtk.so
+/usr/lib/perl5/site_perl/5.005/i386-linux/Gtk.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/Gtk/Types.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/Net/Cmd.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/Net/Config.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/Net/FTP.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/Net/FTP/A.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/Net/FTP/I.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/Net/FTP/dataconn.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/Net/Netrc.pm
+/usr/lib/perl5/site_perl/5.005/i386-linux/auto/Gtk/Gtk.bs
+/usr/lib/perl5/site_perl/5.005/i386-linux/auto/Gtk/Gtk.so
 /usr/lib/rpm/rpmrc
 /usr/X11R6/bin/XF86_FBDev
 /usr/X11R6/bin/XF86_VGA16
 /usr/X11R6/bin/XF86_3DLabs
 /usr/X11R6/bin/XF86_TGA
+/usr/X11R6/bin/XF86_Mach64
 /usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/xf86Wacom.so
-/usr/sbin/ext2resize
-/usr/sbin/rescuept
diff --git a/perl-install/share/list.sparc b/perl-install/share/list.sparc
new file mode 100644
index 000000000..d35feefa2
--- /dev/null
+++ b/perl-install/share/list.sparc
@@ -0,0 +1,73 @@
+/bin/ash
+/bin/cpio
+/lib/libnss_nis.so.2
+/lib/libnss_files.so.2
+/lib/libnss_dns.so.2
+/lib/libresolv.so.2
+/etc/protocols
+/sbin/fdisk
+/sbin/ifport
+/sbin/insmod
+/sbin/mkraid
+/sbin/rmmod
+/sbin/mkdosfs
+/sbin/mke2fs
+/sbin/raidstart
+/usr/bin/bzip2
+/usr/bin/perl
+/usr/lib/libimlib-png.so
+/usr/lib/gtk/themes/engines/libpixmap.so
+/usr/lib/gtk/themes/engines/libpixmap.la
+/usr/lib/libimlib-png.so
+/usr/lib/perl5/5.00503/AutoLoader.pm
+/usr/lib/perl5/5.00503/Carp.pm
+/usr/lib/perl5/5.00503/Data/Dumper.pm
+/usr/lib/perl5/5.00503/Exporter.pm
+/usr/lib/perl5/5.00503/FileHandle.pm
+/usr/lib/perl5/5.00503/SelectSaver.pm
+/usr/lib/perl5/5.00503/SelfLoader.pm
+/usr/lib/perl5/5.00503/Symbol.pm
+/usr/lib/perl5/5.00503/Time/Local.pm
+/usr/lib/perl5/5.00503/dumpvar.pl
+/usr/lib/perl5/5.00503/sparc-linux/Config.pm
+/usr/lib/perl5/5.00503/sparc-linux/DynaLoader.pm
+/usr/lib/perl5/5.00503/sparc-linux/Fcntl.pm
+/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.bs
+/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.so
+/usr/lib/perl5/5.00503/sparc-linux/IO/File.pm
+/usr/lib/perl5/5.00503/sparc-linux/IO/Handle.pm
+/usr/lib/perl5/5.00503/sparc-linux/IO/Seekable.pm
+/usr/lib/perl5/5.00503/sparc-linux/IO/Socket.pm
+/usr/lib/perl5/5.00503/sparc-linux/Socket.pm
+/usr/lib/perl5/5.00503/sparc-linux/_h2ph_pre.ph
+/usr/lib/perl5/5.00503/sparc-linux/asm/unistd.ph
+/usr/lib/perl5/5.00503/sparc-linux/asm-sparc/unistd.ph
+/usr/lib/perl5/5.00503/sparc-linux/asm-sparc64/unistd.ph
+/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.bs
+/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.so
+/usr/lib/perl5/5.00503/sparc-linux/auto/IO/IO.so
+/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.bs
+/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.so
+/usr/lib/perl5/5.00503/sparc-linux/bits/syscall.ph
+/usr/lib/perl5/5.00503/sparc-linux/sys/syscall.ph
+/usr/lib/perl5/5.00503/sparc-linux/syscall.ph
+/usr/lib/perl5/5.00503/lib.pm
+/usr/lib/perl5/5.00503/overload.pm
+/usr/lib/perl5/5.00503/strict.pm
+/usr/lib/perl5/5.00503/vars.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk/Types.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Cmd.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Config.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/A.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/I.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/dataconn.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Netrc.pm
+/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.bs
+/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.so
+/usr/lib/rpm/rpmrc
+/usr/X11R6/bin/XF86_FBDev
+/usr/X11R6/bin/XF86_Mach64
+/usr/X11R6/bin/xmodmap
+/usr/X11R6/lib/modules/xf86Wacom.so