summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
authorPascal Rigaux <pixel@mandriva.com>2005-08-30 11:24:32 +0000
committerPascal Rigaux <pixel@mandriva.com>2005-08-30 11:24:32 +0000
commit40e5751decc76dedf42016e9eb695726a37ccd06 (patch)
treee93f97d2c8ecaf2557c33a4c2ffcc322c88c0baf /perl-install
parent66a3628fe68440fc30f8aafb2ce51001cb8742a1 (diff)
downloaddrakx-backup-do-not-use-40e5751decc76dedf42016e9eb695726a37ccd06.tar
drakx-backup-do-not-use-40e5751decc76dedf42016e9eb695726a37ccd06.tar.gz
drakx-backup-do-not-use-40e5751decc76dedf42016e9eb695726a37ccd06.tar.bz2
drakx-backup-do-not-use-40e5751decc76dedf42016e9eb695726a37ccd06.tar.xz
drakx-backup-do-not-use-40e5751decc76dedf42016e9eb695726a37ccd06.zip
fix "Cancel" in ask_okcancel
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/interactive.pm2
1 files changed, 1 insertions, 1 deletions
diff --git a/perl-install/interactive.pm b/perl-install/interactive.pm
index df5030883..6356d14d3 100644
--- a/perl-install/interactive.pm
+++ b/perl-install/interactive.pm
@@ -165,7 +165,7 @@ sub ask_okcancel_ {
$common->{focus_cancel} = !$b_def;
ask_from_no_check($o, $common, []);
} else {
- ask_from_listf_raw($o, $common, sub { translate($_[0]) }, [ $o->ok, $o->cancel ], $b_def ? $o->ok : "Cancel") eq $o->ok;
+ ask_from_listf_raw($o, $common, sub { translate($_[0]) }, [ $o->ok, $o->cancel ], $b_def ? $o->ok : $o->cancel) eq $o->ok;
}
}
generated by cgit v1.2.1 (git 2.21.0) at 2024-12-21 06:10:22 +0000
160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 
package install_any; # $Id$

use diagnostics;
use strict;

use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $boot_medium @advertising_images);

@ISA = qw(Exporter);
%EXPORT_TAGS = (
    all => [ qw(getNextStep spawnShell addToBeDone) ],
);
@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;

#-######################################################################################
#- misc imports
#-######################################################################################
use MDK::Common::System;
use common;
use run_program;
use partition_table qw(:types);
use partition_table_raw;
use devices;
use fsedit;
use modules;
use detect_devices;
use lang;
use any;
use log;
use fs;

#- boot medium (the first medium to take into account).
$boot_medium = 1;

#-######################################################################################
#- Media change variables&functions
#-######################################################################################
my $postinstall_rpms = '';
my $current_medium = $boot_medium;
my $asked_medium = $boot_medium;
my $cdrom = undef;
sub useMedium($) {
    #- before ejecting the first CD, there are some files to copy!
    #- does nothing if the function has already been called.
    $_[0] > 1 and $::o->{method} eq 'cdrom' and setup_postinstall_rpms($::o->{prefix}, $::o->{packages});

    $asked_medium eq $_[0] or log::l("selecting new medium '$_[0]'");
    $asked_medium = $_[0];
}
sub changeMedium($$) {
    my ($method, $medium) = @_;
    log::l("change to medium $medium for method $method (refused by default)");
    0;
}
sub relGetFile($) {
    local $_ = $_[0];
    m|\.rpm$| ? "$::o->{packages}{mediums}{$asked_medium}{rpmsdir}/$_" : $_;
}
sub askChangeMedium($$) {
    my ($method, $medium) = @_;
    my $allow;
    do {
	eval { $allow = changeMedium($method, $medium) };
    } while ($@); #- really it is not allowed to die in changeMedium!!! or install will cores with rpmlib!!!
    log::l($allow ? "accepting medium $medium" : "refusing medium $medium");
    $allow;
}
sub errorOpeningFile($) {
    my ($file) = @_;
    $file eq 'XXX' and return; #- special case to force closing file after rpmlib transaction.
    $current_medium eq $asked_medium and log::l("errorOpeningFile $file"), return; #- nothing to do in such case.
    $::o->{packages}{mediums}{$asked_medium}{selected} or return; #- not selected means no need for worying about.

    my $max = 32; #- always refuse after $max tries.
    if ($::o->{method} eq "cdrom") {
	cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
	return unless $cdrom;
	ejectCdrom($cdrom);
	while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
	    $current_medium = $asked_medium;
	    eval { fs::mount($cdrom, "/tmp/image", "iso9660", 'readonly') };
	    my $getFile = getFile($file); 
	    $getFile && @advertising_images and copy_advertising($::o);
	    $getFile and return $getFile;
	    $current_medium = 'unknown'; #- don't know what CD is inserted now.
	    ejectCdrom($cdrom);
	    --$max;
	}
    } else {
	while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
	    $current_medium = $asked_medium;
	    my $getFile = getFile($file); $getFile and return $getFile;
	    $current_medium = 'unknown'; #- don't know what CD image has been copied.
	    --$max;
	}
    }

    #- keep in mind the asked medium has been refused on this way.
    #- this means it is no more selected.
    $::o->{packages}{mediums}{$asked_medium}{selected} = undef;

    #- on cancel, we can expect the current medium to be undefined too,
    #- this enable remounting if selecting a package back.
    $current_medium = 'unknown';

    return;
}
sub getFile {
    my ($f, $method) = @_;
    log::l("getFile $f:$method");
    my $rel = relGetFile($f);
    do {
	if ($f =~ m|^http://|) {
	    require http;
	    http::getFile($f);
	} elsif ($method =~ /crypto|update/i) {
	    require crypto;
	    crypto::getFile($f);
	} elsif ($::o->{method} eq "ftp") {
	    require ftp;
	    ftp::getFile($rel);
	} elsif ($::o->{method} eq "http") {
	    require http;
	    http::getFile("$ENV{URLPREFIX}/$rel");
	} else {
	    #- try to open the file, but examine if it is present in the repository, this allow
	    #- handling changing a media when some of the file on the first CD has been copied
	    #- to other to avoid media change...
	    my $f2 = "$postinstall_rpms/$f";
	    $f2 = "/tmp/image/$rel" unless $postinstall_rpms && -e $f2;
	    open GETFILE, $f2 and *GETFILE;
	}
    } || errorOpeningFile($f);
}
sub getAndSaveFile {
    my ($file, $local) = @_ == 1 ? ("Mandrake/mdkinst$_[0]", $_[0]) : @_;
    local *F; open F, ">$local" or return;
    local $/ = \ (16 * 1024);
    my $f = ref($file) ? $file : getFile($file) or return;
    local $_;
    while (<$f>) { syswrite F, $_ }
    1;
}


#-######################################################################################
#- Post installation RPMS from cdrom only, functions
#-######################################################################################
sub setup_postinstall_rpms($$) {
    my ($prefix, $packages) = @_;

    $postinstall_rpms and return;
    $postinstall_rpms = "$prefix/usr/postinstall-rpm";

    require pkgs;

    log::l("postinstall rpms directory set to $postinstall_rpms");
    clean_postinstall_rpms(); #- make sure in case of previous upgrade problem.
    mkdir_p($postinstall_rpms);

    my %toCopy;
    #- compute closure of package that may be copied, use INSTALL category
    #- in rpmsrate.
    foreach (@{$packages->{needToCopy} || []}) {
	my $p = pkgs::packageByName($packages, $_);
	pkgs::selectPackage($packages, $p, 0, \%toCopy);
    }

    my @toCopy = grep { $_ && pkgs::packageFlagSelected($_) == 0 } map { pkgs::packageByName($packages, $_) } keys %toCopy;

    #- extract headers of package, this is necessary for getting
    #- the complete filename of each package.
    #- copy the package files in the postinstall RPMS directory.
    #- last arg is default medium '' known as the CD#1.
    #- cp_af doesn't handle correctly a missing file.
    eval { cp_af((grep { -r $_ } map { "/tmp/image/" . relGetFile(pkgs::packageFile($_)) } @toCopy), $postinstall_rpms) };

    log::l("copying Auto Install Floppy");
    getAndSaveInstallFloppy($::o, "$postinstall_rpms/auto_install.img");
}

sub clean_postinstall_rpms() {
    $postinstall_rpms and -d $postinstall_rpms and rm_rf($postinstall_rpms);
}


#-######################################################################################
#- Specific Hardware to take into account and associated rpms to install
#-######################################################################################
sub allowNVIDIA_rpms {
    my ($packages) = @_;
    require pkgs;
    if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
	#- at this point, we can allow using NVIDIA 3D acceleration packages.
	my @rpms;
	foreach (qw(kernel kernel-smp kernel-entreprise kernel22 kernel22-smp kernel22-secure)) {
	    my $p = pkgs::packageByName($packages, $_);
	    pkgs::packageSelectedOrInstalled($p) or next;
	    my $name = "NVIDIA_kernel-" . pkgs::packageVersion($p) . "-" . pkgs::packageRelease($p) . (/(-.*)/ && $1);
	    pkgs::packageByName($packages, $name) or return;
	    push @rpms, $name;
	}
	@rpms > 0 or return;
	return [ @rpms, "NVIDIA_GLX" ];
    }
}

#-######################################################################################
#- Functions
#-######################################################################################
sub kernelVersion {
    my ($o) = @_;
    my $kernel = readlink "$o->{prefix}/boot/vmlinuz" || first(all("$o->{prefix}/boot"));
    first($kernel =~ /vmlinuz-(.*)/);
}


sub getNextStep {
    my ($s) = $::o->{steps}{first};
    $s = $::o->{steps}{$s}{next} while $::o->{steps}{$s}{done} || !$::o->{steps}{$s}{reachable};
    $s;
}

sub spawnShell {
    return if $::o->{localInstall} || $::testing;

    -x "/bin/sh" or die "cannot open shell - /bin/sh doesn't exist";

    fork and return;

    $ENV{DISPLAY} ||= ":0"; #- why not :pp

    local *F;
    sysopen F, "/dev/tty2", 2 or die "cannot open /dev/tty2 -- no shell will be provided";

    open STDIN, "<&F" or die '';
    open STDOUT, ">&F" or die '';
    open STDERR, ">&F" or die '';
    close F;

    print any::drakx_version(), "\n";

    c::setsid();

    ioctl(STDIN, c::TIOCSCTTY(), 0) or warn "could not set new controlling tty: $!";

    my $busybox = "/usr/bin/busybox";
    exec {-e $busybox ? $busybox : "/bin/sh"} "/bin/sh" or log::l("exec of /bin/sh failed: $!");
}

sub getAvailableSpace {
    my ($o) = @_;

    #- make sure of this place to be available for installation, this could help a lot.
    #- currently doing a very small install use 36Mb of postinstall-rpm, but installing
    #- these packages may eat up to 90Mb (of course not all the server may be installed!).
    #- 65mb may be a good choice to avoid almost all problem of insuficient space left...
    my $minAvailableSize = 65 * sqr(1024);

    my $n = !$::testing && getAvailableSpace_mounted($o->{prefix}) || 
            getAvailableSpace_raw($o->{fstab}) * 512 / 1.07;
    $n - max(0.1 * $n, $minAvailableSize);
}

sub getAvailableSpace_mounted {
    my ($prefix) = @_;
    my $dir = -d "$prefix/usr" ? "$prefix/usr" : "$prefix";
    my (undef, $free) = MDK::Common::System::df($dir) or return;
    log::l("getAvailableSpace_mounted $free KB");
    $free * 1024 || 1;
}
sub getAvailableSpace_raw {
    my ($fstab) = @_;

    do { $_->{mntpoint} eq '/usr' and return $_->{size} } foreach @$fstab;
    do { $_->{mntpoint} eq '/'    and return $_->{size} } foreach @$fstab;

    if ($::testing) {
	my $nb = 450;
	log::l("taking ${nb}MB for testing");
	return $nb << 11;
    }
    die "missing root partition";
}

sub preConfigureTimezone {
    my ($o) = @_;
    require timezone;
   
    #- can't be done in install cuz' timeconfig %post creates funny things
    add2hash($o->{timezone}, { timezone::read($o->{prefix}) }) if $o->{isUpgrade};

    $o->{timezone}{timezone} ||= timezone::bestTimezone(lang::lang2text($o->{lang}));

    my $utc = $::expert && !grep { isFat($_) || isNT($_) } @{$o->{fstab}};
    my $ntp = timezone::ntp_server($o->{prefix});
    add2hash_($o->{timezone}, { UTC => $utc, ntp => $ntp });
}

sub setPackages {
    my ($o) = @_;

    require pkgs;
    if (!$o->{packages} || is_empty_hash_ref($o->{packages}{names})) {
	$o->{packages} = pkgs::psUsingHdlists($o->{prefix}, $o->{method});

	pkgs::getDeps($o->{prefix}, $o->{packages});
	pkgs::selectPackage($o->{packages},
			    pkgs::packageByName($o->{packages}, 'basesystem') || die("missing basesystem package"), 1);

	#- must be done after selecting base packages (to save memory)
	pkgs::getProvides($o->{packages});

	#- must be done after getProvides
	pkgs::read_rpmsrate($o->{packages}, getFile("Mandrake/base/rpmsrate"));
	($o->{compssUsers}, $o->{compssUsersSorted}) = pkgs::readCompssUsers($o->{meta_class});

	#- preselect default_packages and compssUsersChoices.
	setDefaultPackages($o);
    } else {
	#- this has to be done to make sure necessary files for urpmi are
	#- present.
	pkgs::psUpdateHdlistsDeps($o->{prefix}, $o->{method});
    }
}

sub setDefaultPackages {
    my ($o, $clean) = @_;

    if ($clean) {
	delete $o->{$_} foreach qw(default_packages compssUsersChoice); #- clean modified variables.
    }

    push @{$o->{default_packages}}, "nfs-utils-clients" if $o->{method} eq "nfs";
    push @{$o->{default_packages}}, "numlock" if $o->{miscellaneous}{numlock};
    push @{$o->{default_packages}}, "kernel22" if !$::oem && c::kernel_version() =~ /^\Q2.2/;
    push @{$o->{default_packages}}, "raidtools" if !is_empty_array_ref($o->{all_hds}{raids});
    push @{$o->{default_packages}}, "lvm" if !is_empty_array_ref($o->{all_hds}{lvms});
    push @{$o->{default_packages}}, "reiserfsprogs" if grep { isThisFs("reiserfs", $_) } @{$o->{fstab}};
    push @{$o->{default_packages}}, "xfsprogs" if grep { isThisFs("xfs", $_) } @{$o->{fstab}};
    push @{$o->{default_packages}}, "jfsprogs" if grep { isThisFs("jfs", $_) } @{$o->{fstab}};
    push @{$o->{default_packages}}, "alsa", "alsa-utils" if modules::get_alias("sound-slot-0") =~ /^snd-card-/;

    #- if no cleaning needed, populate by default, clean is used for second or more call to this function.
    unless ($clean) {
	if ($::auto_install && $o->{compssUsersChoice}{ALL}) {
	    $o->{compssUsersChoice}{$_} = 1 foreach map { @{$o->{compssUsers}{$_}{flags}} } @{$o->{compssUsersSorted}};
	}
	if (!$o->{compssUsersChoice} && !$o->{isUpgrade}) {
	    #- by default, choose:
	    $o->{compssUsersChoice}{$_} = 1 foreach 'GNOME', 'KDE', 'CONFIG', 'X';
	    $o->{lang} eq 'eu_ES' and $o->{compssUsersChoice}{KDE} = 0;
	    $o->{compssUsersChoice}{$_} = 1 
	      foreach map { @{$o->{compssUsers}{$_}{flags}} } 'Workstation|Office Workstation', 'Workstation|Internet station';
	}
    }
    $o->{compssUsersChoice}{uc($_)} = 1 foreach grep { modules::get_that_type($_) } ('tv', 'scanner', 'photo', 'sound');
    $o->{compssUsersChoice}{uc($_)} = 1 foreach map { $_->{driver} =~ /Flag:(.*)/ } detect_devices::probeall();
    $o->{compssUsersChoice}{SYSTEM} = 1;
    $o->{compssUsersChoice}{DOCS} = !$o->{excludedocs};
    $o->{compssUsersChoice}{BURNER} = 1 if detect_devices::burners();
    $o->{compssUsersChoice}{DVD} = 1 if detect_devices::dvdroms();
    $o->{compssUsersChoice}{USB} = 1 if modules::get_alias("usb-interface");
    $o->{compssUsersChoice}{PCMCIA} = 1 if detect_devices::hasPCMCIA();
    $o->{compssUsersChoice}{HIGH_SECURITY} = 1 if $o->{security} > 3;
    $o->{compssUsersChoice}{BIGMEM} = 1 if !$::oem && (availableRamMB() > 800) && (arch() !~ /ia64/);
    $o->{compssUsersChoice}{SMP} = 1 if detect_devices::hasSMP();
    $o->{compssUsersChoice}{'3D'} = 1 if 
      detect_devices::matching_desc('Matrox.* G[245][05]0') ||
      detect_devices::matching_desc('Rage X[CL]') ||
      detect_devices::matching_desc('3D Rage (?:LT|Pro)') ||
      detect_devices::matching_desc('Voodoo [35]') ||
      detect_devices::matching_desc('Voodoo Banshee') ||
      detect_devices::matching_desc('8281[05].* CGC') ||
      detect_devices::matching_desc('Rage 128') ||
      detect_devices::matching_desc('Radeon ') && !detect_devices::matching_desc('Radeon 8500') ||
      detect_devices::matching_desc('[nN]Vidia.*T[nN]T2') || #- TNT2 cards
      detect_devices::matching_desc('[nN]Vidia.*NV[56]') ||
      detect_devices::matching_desc('[nN]Vidia.*Vanta') ||
      detect_devices::matching_desc('[nN]Vidia.*GeForce') || #- GeForce cards
      detect_devices::matching_desc('[nN]Vidia.*NV1[15]') ||
      detect_devices::matching_desc('[nN]Vidia.*Quadro');


    foreach (map { substr($_, 0, 2) } lang::langs($o->{langs})) {
	pkgs::packageByName($o->{packages}, "locales-$_") or next;
	push @{$o->{default_packages}}, "locales-$_";
	$o->{compssUsersChoice}{qq(LOCALES"$_")} = 1; #- mainly for zh in case of zh_TW.Big5
    }
    foreach (lang::langsLANGUAGE($o->{langs})) {
	$o->{compssUsersChoice}{qq(LOCALES"$_")} = 1;
    }
    $o->{compssUsersChoice}{'CHARSET"' . lang::lang2charset($o->{lang}) . '"'} = 1;
}

sub unselectMostPackages {
    my ($o) = @_;
    pkgs::unselectAllPackages($o->{packages});
    pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || next) foreach @{$o->{default_packages}};
}

sub warnAboutNaughtyServers {
    my ($o) = @_;
    my @naughtyServers = pkgs::naughtyServers($o->{packages}) or return 1;
    if (!$o->ask_yesorno('', 
formatAlaTeX(_("You have selected the following server(s): %s


These servers are activated by default. They don't have any known security
issues, but some new could be found. In that case, you must make sure to upgrade
as soon as possible.


Do you really want to install these servers?
", join(", ", @naughtyServers))), 1)) {
	pkgs::unselectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_)) foreach @naughtyServers;
    }
}

sub addToBeDone(&$) {
    my ($f, $step) = @_;

    return &$f() if $::o->{steps}{$step}{done};

    push @{$::o->{steps}{$step}{toBeDone}}, $f;
}

sub setAuthentication {
    my ($o) = @_;
    my ($shadow, $md5, $ldap, $nis) = @{$o->{authentication} || {}}{qw(shadow md5 LDAP NIS)};
    my $p = $o->{prefix};
    #- obsoleted always enabled (in /etc/pam.d/system-auth furthermore) #any::enableMD5Shadow($p, $shadow, $md5);
    any::enableShadow($p) if $shadow;
    if ($ldap) {
	$o->pkg_install(qw(chkauth openldap-clients nss_ldap pam_ldap));
	run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "ldap", "-D", $o->{netc}{LDAPDOMAIN}, "-s", $ldap);
    } elsif ($nis) {
	#$o->pkg_install(qw(chkauth ypbind yp-tools net-tools));
	#run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "yp", $domain, "-s", $nis);
	$o->pkg_install("ypbind");
	my $domain = $o->{netc}{NISDOMAIN};
	$domain || $nis ne "broadcast" or die _("Can't use broadcast with no NIS domain");
	my $t = $domain ? "domain $domain" . ($nis ne "broadcast" && " server")
	                : "ypserver";
	substInFile {
	    $_ = "#~$_" unless /^#/;
	    $_ .= "$t $nis\n" if eof;
	} "$p/etc/yp.conf";
	require network;
	network::write_conf("$p/etc/sysconfig/network", $o->{netc});
    }
}

sub killCardServices {
    my $pid = chomp_(cat_("/tmp/cardmgr.pid"));
    $pid and kill(15, $pid); #- send SIGTERM
}

sub unlockCdrom(;$) {
    my ($cdrom) = @_;
    $cdrom or cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
    eval { $cdrom and ioctl detect_devices::tryOpen($1), c::CDROM_LOCKDOOR(), 0 };
}
sub ejectCdrom(;$) {
    my ($cdrom) = @_;
    getFile("XXX"); #- close still opened filehandle
    $cdrom ||= $1 if cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image),;
    if ($cdrom) {
	#- umount BEFORE opening the cdrom device otherwise the umount will
	#- D state if the cdrom is already removed
	eval { fs::umount("/tmp/image") };
	if ($@) { log::l("files still open: ", readlink($_)) foreach map { glob_("$_/fd/*") } glob_("/proc/*") }
	eval { ioctl detect_devices::tryOpen($cdrom), c::CDROMEJECT(), 1 };	
    }
}

sub setupFB {
    my ($o, $vga) = @_;

    $vga ||= 785; #- assume at least 640x480x16.

    require bootloader;
    #- update bootloader entries with vga, all kernel are now framebuffer.
    foreach (qw(vmlinuz vmlinuz-secure vmlinuz-smp vmlinuz-hack)) {
	if (my $e = bootloader::get("/boot/$_", $o->{bootloader})) {
	    $e->{vga} = $vga;
	}
    }
    bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
    1;
}

sub hdInstallPath() {
    my $tail = first(readlink("/tmp/image") =~ m|^/tmp/hdimage/(.*)|);
    my $head = first(readlink("/tmp/hdimage") =~ m|$::o->{prefix}(.*)|);
    $tail && ($head ? "$head/$tail" : "/mnt/hd/$tail");
}

sub install_urpmi {
    my ($prefix, $method, $mediums) = @_;

    #- rare case where urpmi cannot be installed (no hd install path).
    $method eq 'disk' && !hdInstallPath() and return;

    my @cfg = map {
	my $name = $_->{fakemedium};

	local *LIST;
	my $mask = umask 077;
	open LIST, ">$prefix/var/lib/urpmi/list.$name" or log::l("failed to write list.$name");
	umask $mask;

	my $dir = ($_->{prefix} || ${{ nfs => "file://mnt/nfs", 
				       disk => "file:/" . hdInstallPath(),
				       ftp => $ENV{URLPREFIX},
				       http => $ENV{URLPREFIX},
				       cdrom => "removable://mnt/cdrom" }}{$method}) . "/$_->{rpmsdir}";

	local *FILES; open FILES, "$ENV{LD_LOADER} parsehdlist /tmp/$_->{hdlist} |";
	print LIST "$dir/$_\n" foreach chomp_(<FILES>);
	close FILES or log::l("parsehdlist failed"), return;
	close LIST;

	#- build synthesis file if there are still not existing (ie not copied from mirror).
	if (-s "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz" <= 32) {
	    run_program::rooted($prefix, "parsehdlist", ">", "/var/lib/urpmi/synthesis.hdlist.$name",
				"--synthesis", "/var/lib/urpmi/hdlist.$name.cz");
	    run_program::rooted($prefix, "gzip", "-S", ".cz", "/var/lib/urpmi/synthesis.hdlist.$name");
	}

	my ($qname, $qdir) = ($name, $dir);
	$qname =~ s/(\s)/\\$1/g; $qdir =~ s/(\s)/\\$1/g;

	#- output new urpmi.cfg format here.
	"$qname " . ($dir !~ /^(ftp|http)/ && $qdir) . " {
  hdlist: hdlist.$name.cz
  with_hdlist: ../base/$_->{hdlist}
  list: list.$name" . ($dir =~ /removable:/ && "
  removable: /dev/cdrom") . ($_->{update} && "
  update") . "
}

";
    } sort { $a->{medium} <=> $b->{medium} } values %$mediums;
    eval { output "$prefix/etc/urpmi/urpmi.cfg", @cfg };
}


#-###############################################################################
#- kde stuff
#-###############################################################################
sub kderc_largedisplay {
    my ($prefix) = @_;

    update_gnomekderc($_, 'KDE', 
		     Contrast => 7,
		     kfmIconStyle => "Large",
		     kpanelIconStyle => "Normal", #- to change to Large when icons looks better
		     KDEIconStyle => "Large") foreach list_skels($prefix, '.kderc');

    substInFile {
	s/^(GridWidth)=85/$1=100/;
	s/^(GridHeight)=70/$1=75/;
    } $_ foreach list_skels($prefix, '.kde/share/config/kfmrc');
}

sub kdeicons_postinstall {
    my ($prefix) = @_;

    #- parse etc/fstab file to search for dos/win, floppy, zip, cdroms icons.
    #- handle both supermount and fsdev usage.
    my %l = (
	     'cdrom' => [ 'cdrom', 'Cd-Rom' ],
	     'zip' => [ 'zip', 'Zip' ],
	     'floppy-ls' => [ 'floppy', 'LS-120' ],
	     'floppy' => [ 'floppy', 'Floppy' ],
    );
    foreach (fs::read_fstab($prefix, "/etc/fstab")) {

	my ($name_, $nb) = $_->{mntpoint} =~ m|.*/(\S+?)(\d*)$/|;
	my ($name, $text) = @{$l{$name_} || []};

	my $f = ${{
	    supermount => sub { $name .= '.fsdev' if $name },
	    vfat => sub { $name = 'Dos_'; $text = $name_ },
	}}{$_->{type}};
	&$f if $f;

	template2userfile($prefix, 
			  "$ENV{SHARE_PATH}/$name.kdelnk.in",
			  "Desktop/$text" .  ($nb && " $nb"). ".kdelnk",
			  1, %$_) if $name;
    }

    # rename the .kdelnk to the name found in the .kdelnk as kde doesn't use it
    # for displaying
    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
	foreach (grep { /\.kdelnk$/ } all($dir)) {
	    cat_("$dir/$_") =~ /^Name\[\Q$ENV{LANG}\E\]=(.{2,14})$/m
	      and rename "$dir/$_", "$dir/$1.kdelnk";
	}
    }
}

sub kdemove_desktop_file {
    my ($prefix) = @_;
    my @toMove = qw(doc.kdelnk news.kdelnk updates.kdelnk home.kdelnk printer.kdelnk floppy.kdelnk cdrom.kdelnk FLOPPY.kdelnk CDROM.kdelnk);

    #- remove any existing save in Trash of each user and
    #- move appropriate file there after an upgrade.
    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
	renamef("$dir/$_", "$dir/Trash/$_") 
	  foreach grep { -e "$dir/$_" } @toMove, grep { /\.rpmorig$/ } all($dir)
    }
}


#-###############################################################################
#- auto_install stuff
#-###############################################################################
sub auto_inst_file() { ($::g_auto_install ? "/tmp" : "$::o->{prefix}/root/drakx") . "/auto_inst.cfg.pl" }

sub report_bug {
    my ($prefix) = @_;
    any::report_bug($prefix, 'auto_inst' => g_auto_install('', 1));
}

sub g_auto_install {
    my ($replay, $respect_privacy) = @_;
    my $o = {};

    require pkgs;
    $o->{default_packages} = pkgs::selected_leaves($::o->{packages});

    my @fields = qw(mntpoint type size);
    $o->{partitions} = [ map { my %l; @l{@fields} = @$_{@fields}; \%l } grep { $_->{mntpoint} } @{$::o->{fstab}} ];
    
    exists $::o->{$_} and $o->{$_} = $::o->{$_} foreach qw(lang authentication mouse wacom netc timezone superuser intf keyboard users partitioning isUpgrade manualFstab nomouseprobe crypto security netcnx useSupermount autoExitInstall mkbootdisk); #- TODO modules bootloader 

    if (my $printer = $::o->{printer}) {
	$o->{printer}{$_} = $::o->{printer}{$_} foreach qw(SPOOLER DEFAULT BROWSEPOLLADDR BROWSEPOLLPORT MANUALCUPSCONFIG);
	$o->{printer}{configured} = {};
	foreach my $queue (keys %{$::o->{printer}{configured}}) {
	    my $val = $::o->{printer}{configured}{$queue}{queuedata};
	    exists $val->{$_} and $o->{printer}{configured}{$queue}{queuedata}{$_} = $val->{$_} foreach keys %{$val || {}};
	}
    }

    if (my $card = $::o->{X}{card}) {
	$o->{X}{$_} = $::o->{X}{$_} foreach qw(default_depth resolution_wanted);
	if ($o->{X}{default_depth} and my $depth = $card->{depth}{$o->{X}{default_depth}}) {
	    $depth ||= [];
	    $o->{X}{resolution_wanted} ||= join "x", @{$depth->[0]} unless is_empty_array_ref($depth->[0]);
	    $o->{X}{monitor} = $::o->{X}{monitor} if $::o->{X}{monitor}{manual};
	}
    }

    local $o->{partitioning}{auto_allocate} = !$replay;
    $o->{autoExitInstall} = !$replay;
    $o->{interactiveSteps} = [ 'doPartitionDisks', 'formatPartitions'] if $replay;

    #- deep copy because we're modifying it below
    $o->{users} = [ @{$o->{users} || []} ];

    my @user_info_to_remove = (
	if_($respect_privacy, qw(name realname home pw)), 
	qw(oldu oldg password password2),
    );
    $_ = { %{$_ || {}} }, delete @$_{@user_info_to_remove} foreach $o->{superuser}, @{$o->{users} || []};
    
    require Data::Dumper;
    my $str = join('', 
"#!/usr/bin/perl -cw
#
# You should check the syntax of this file before using it in an auto-install.
# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
# (note the '#!/usr/bin/perl -cw' on the first line).
", Data::Dumper->Dump([$o], ['$o']), "\0");
    $str =~ s/ {8}/\t/g; #- replace all 8 space char by only one tabulation, this reduces file size so much :-)
    $str;
}

sub getAndSaveInstallFloppy {
    my ($o, $where) = @_;
    if ($postinstall_rpms && -d $postinstall_rpms && -r "$postinstall_rpms/auto_install.img") {
	log::l("getAndSaveInstallFloppy: using file saved as $postinstall_rpms/auto_install.img");
	cp_af("$postinstall_rpms/auto_install.img", $where);
    } else {
	my $image = cat_("/proc/cmdline") =~ /pcmcia/ ? "pcmcia" :
	  ${{ disk => 'hd', cdrom => 'cdrom', ftp => 'network', nfs => 'network', http => 'network' }}{$o->{method}};
	$image .= arch() =~ /sparc64/ && "64"; #- for sparc64 there are a specific set of image.
	getAndSaveFile("images/$image.img", $where) or log::l("failed to write Install Floppy ($image.img) to $where"), return;
    }
    1;
}

sub getAndSaveAutoInstallFloppy {
    my ($o, $replay, $where) = @_;

    eval { modules::load('loop') };

    if (arch() =~ /sparc/) {
	my $imagefile = "$o->{prefix}/tmp/autoinst.img";
	my $mountdir = "$o->{prefix}/tmp/mount"; -d $mountdir or mkdir $mountdir, 0755;
	my $workdir = "$o->{prefix}/tmp/work"; -d $workdir or rmdir $workdir;

	getAndSaveInstallFloppy($o, $imagefile) or return;
        devices::make($_) foreach qw(/dev/loop6 /dev/ram);

        run_program::run("losetup", "/dev/loop6", $imagefile);
        fs::mount("/dev/loop6", $mountdir, "romfs", 'readonly');
        cp_af($mountdir, $workdir);
        fs::umount($mountdir);
        run_program::run("losetup", "-d", "/dev/loop6");

	substInFile { s/timeout.*//; s/^(\s*append\s*=\s*\".*)\"/$1 kickstart=floppy\"/ } "$workdir/silo.conf"; #" for po
#-TODO	output "$workdir/ks.cfg", generate_ks_cfg($o);
	output "$workdir/boot.msg", "\n7m",
"!! If you press enter, an auto-install is going to start.
    ALL data on this computer is going to be lost,
    including any Windows partitions !!
", "7m\n";

	local $o->{partitioning}{clearall} = 1;
	output("$workdir/auto_inst.cfg", g_auto_install());

        run_program::run("genromfs", "-d", $workdir, "-f", "/dev/ram", "-A", "2048,/..", "-a", "512", "-V", "DrakX autoinst");
        fs::mount("/dev/ram", $mountdir, 'romfs', 0);
        run_program::run("silo", "-r", $mountdir, "-F", "-i", "/fd.b", "-b", "/second.b", "-C", "/silo.conf");
        fs::umount($mountdir);
	require commands;
        commands::dd("if=/dev/ram", "of=$where", "bs=1440", "count=1024");

        rm_rf($workdir, $mountdir, $imagefile);
    } elsif (arch() =~ /ia64/) {
	#- nothing yet
    } else {
	my $imagefile = "$o->{prefix}/tmp/autoinst.img";
	my $mountdir = "$o->{prefix}/tmp/aif-mount"; -d $mountdir or mkdir $mountdir, 0755;

	my $param = 'kickstart=floppy ' . generate_automatic_stage1_params($o);

	getAndSaveInstallFloppy($o, $imagefile) or return;

	my $dev = devices::set_loop($imagefile) or log::l("couldn't set loopback device"), return;
        fs::mount($dev, $mountdir, 'vfat', 0);

	substInFile { 
	    s/timeout.*/$replay ? 'timeout 1' : ''/e;
	    s/^(\s*append)/$1 $param/ 
	} "$mountdir/syslinux.cfg";

	unlink "$mountdir/help.msg";
	output "$mountdir/boot.msg", "\n0c",
"!! If you press enter, an auto-install is going to start.
   All data on this computer is going to be lost,
   including any Windows partitions !!
", "07\n" if !$replay;

	local $o->{partitioning}{clearall} = !$replay;
	eval { output("$mountdir/auto_inst.cfg", g_auto_install($replay)); };
	$@ and log::l("Warning: <$@>");

	fs::umount($mountdir);
	rmdir $mountdir;
	devices::del_loop($dev);
	require commands;
	commands::dd("if=$imagefile", "of=$where", "bs=1440", "count=1024");
	unlink $imagefile;
    }
    1;
}


sub g_default_packages {
    my ($o, $quiet) = @_;

    my $floppy = detect_devices::floppy();

    while (1) {
	$o->ask_okcancel('', _("Insert a FAT formatted floppy in drive %s", $floppy), 1) or return;

	eval { fs::mount(devices::make($floppy), "/floppy", "vfat", 0) };
	last if !$@;
	$o->ask_warn('', _("This floppy is not FAT formatted"));
    }

    require Data::Dumper;
    my $str = Data::Dumper->Dump([ { default_packages => pkgs::selected_leaves($o->{packages}) } ], ['$o']);
    $str =~ s/ {8}/\t/g;
    output('/floppy/auto_inst.cfg', 
	   "# You should always check the syntax with 'perl -cw auto_inst.cfg.pl'\n",
	   "# before testing.  To use it, boot with ``linux defcfg=floppy''\n",
	   $str, "\0");
    fs::umount("/floppy");

    $quiet or $o->ask_warn('', _("To use this saved packages selection, boot installation with ``linux defcfg=floppy''"));
}

sub loadO {
    my ($O, $f) = @_; $f ||= auto_inst_file;
    my $o;
    if ($f =~ /^(floppy|patch)$/) {
	my $f = $f eq "floppy" ? 'auto_inst.cfg' : "patch";
	unless ($::testing) {
	    fs::mount(devices::make(detect_devices::floppy()), "/mnt", (arch() =~ /sparc/ ? "romfs" : "vfat"), 'readonly');
	    $f = "/mnt/$f";
	}
	-e $f or $f .= '.pl';

	my $b = before_leaving {
	    fs::umount("/mnt") unless $::testing;
	    modules::unload($_) foreach qw(vfat fat);
	};
	$o = loadO($O, $f);
    } else {
	-e "$f.pl" and $f .= ".pl" unless -e $f;

	my $fh = -e $f ? do { local *F; open F, $f; *F } : getFile($f) or die _("Error reading file %s", $f);
	{
	    local $/ = "\0";
	    no strict;
	    eval <$fh>;
	    close $fh;
	    $@ and die;
	}
	add2hash_($o ||= {}, $O);
    }
    bless $o, ref $O;
}

sub generate_automatic_stage1_params {
    my ($o) = @_;

    my @ks = "method:$o->{method}";

    if ($o->{method} =~ /http/) {
	"$ENV{URLPREFIX}" =~ m|http://([^/:]+)/(.*)| or die;
	push @ks, "server:$1", "directory:$2";
    } elsif ($o->{method} =~ /ftp/) {
	push @ks,  "server:$ENV{HOST}", "directory:$ENV{PREFIX}", "user:$ENV{LOGIN}", "pass:$ENV{PASSWORD}";
    } elsif ($o->{method} =~ /nfs/) {
	cat_("/proc/mounts") =~ m|(\S+):(\S+)\s+/tmp/image nfs| or die;
	push @ks, "server:$1", "directory:$2";
    }

    my ($intf) = values %{$o->{intf}};
    if ($intf->{BOOTPROTO} =~ /dhcp/) {
	push @ks, "network:dhcp";
    } else {
	require network;
	push @ks, "network:static", "ip:$intf->{IPADDR}", "netmask:$intf->{NETMASK}", "gateway:$o->{netc}{GATEWAY}";
	my @dnss = network::dnsServers($o->{netc});
	push @ks, "dns:$dnss[0]" if @dnss;
    }
    "automatic=".join(',', @ks);
}

sub guess_mount_point {
    my ($part, $prefix, $user) = @_;

    my %l = (
	     '/'     => 'etc/fstab',
	     '/boot' => 'vmlinuz',
	     '/tmp'  => '.X11-unix',
	     '/usr'  => 'X11R6',
	     '/var'  => 'catman',
	    );

    my $handle = any::inspect($part, $prefix) or return;
    my $d = $handle->{dir};
    my ($mnt) = grep { -e "$d/$l{$_}" } keys %l;
    $mnt ||= (stat("$d/.bashrc"))[4] ? '/root' : '/home/user' . ++$$user if -e "$d/.bashrc";
    $mnt ||= (grep { -d $_ && (stat($_))[4] >= 500 && -e "$_/.bashrc" } glob_("$d")) ? '/home' : '';
    ($mnt, $handle);
}

sub suggest_mount_points {
    my ($fstab, $prefix, $uniq) = @_;

    my $user;
    foreach my $part (grep { isTrueFS($_) } @$fstab) {
	$part->{mntpoint} && !$part->{unsafeMntpoint} and next; #- if already found via an fstab

	my ($mnt, $handle) = guess_mount_point($part, $prefix, \$user) or next;

	next if $uniq && fsedit::mntpoint2part($mnt, $fstab);
	$part->{mntpoint} = $mnt; delete $part->{unsafeMntpoint};

	#- try to find other mount points via fstab
	fs::merge_info_from_fstab($fstab, $handle->{dir}, $uniq) if $mnt eq '/';
    }
    $_->{mntpoint} and log::l("suggest_mount_points: $_->{device} -> $_->{mntpoint}") foreach @$fstab;
}

#- mainly for finding the root partitions for upgrade
sub find_root_parts {
    my ($fstab, $prefix) = @_;
    log::l("find_root_parts");
    my $user;
    grep { 
	my ($mnt) = guess_mount_point($_, $prefix, \$user);
	$mnt eq '/';
    } @$fstab;
}
sub use_root_part {
    my ($fstab, $part, $prefix) = @_;
    {
	my $handle = any::inspect($part, $prefix) or die;
	fs::merge_info_from_fstab($fstab, $handle->{dir}, 'uniq');
    }
    map { $_->{mntpoint} = 'swap' } grep { isSwap($_) } @$fstab; #- use all available swap.
}

sub getHds {
    my ($o, $f_err) = @_;
    my $ok = 1;
    my $try_scsi = !$::expert;
    my $flags = $o->{partitioning};

    my @drives = detect_devices::hds();
#    add2hash_($o->{partitioning}, { readonly => 1 }) if partition_table_raw::typeOfMBR($drives[0]{device}) eq 'system_commander';

  getHds: 
    my $all_hds = catch_cdie { fsedit::hds(\@drives, $flags) }
      sub {
	  $ok = 0;
	  my $err = formatError($@);
	  log::l("error reading partition table: $err");
	  !$flags->{readonly} && $f_err and $f_err->($err);
      };
    my $hds = $all_hds->{hds};

    if (is_empty_array_ref($hds) && $try_scsi) {
	$try_scsi = 0;
	$o->setupSCSI; #- ask for an unautodetected scsi card
	goto getHds;
    }
    if (!$::testing) {
	@$hds = grep { eval { partition_table_raw::test_for_bad_drives($_) }; !$@ } @$hds;
    }

    $ok = fsedit::verifyHds($hds, $flags->{readonly}, $ok)
        if !($flags->{clearall} || $flags->{clear});

    #- try to figure out if the same number of hds is available, use them if ok.
    $ok && $hds && @$hds > 0 && @{$o->{all_hds}{hds} || []} == @$hds and return $ok;

    fs::get_raw_hds('', $all_hds);
    fs::add2all_hds($all_hds, @{$o->{manualFstab}});

    $o->{all_hds} = $all_hds;
    $o->{fstab} = [ fsedit::get_all_fstab($all_hds) ];
    fs::merge_info_from_mtab($o->{fstab});

    my @win = grep { isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) }) } @{$o->{fstab}};
    log::l("win parts: ", join ",", map { $_->{device} } @win) if @win;
    if (@win == 1) {
	#- Suggest /boot/efi on ia64.
	$win[0]{mntpoint} = arch() =~ /ia64/ ? "/boot/efi" : "/mnt/windows";
    } else {
	my %w; foreach (@win) {
	    my $v = $w{$_->{device_windobe}}++;
	    $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/win_" . lc($_->{device_windobe}) . ($v ? $v+1 : ''); #- lc cuz of StartOffice(!) cf dadou
	}
    }

    my @sunos = grep { isSunOS($_) && type2name($_->{type}) =~ /root/i } @{$o->{fstab}}; #- take only into account root partitions.
    if (@sunos) {
	my $v = '';
	map { $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/sunos" . ($v && ++$v) } @sunos;
    }
    #- a good job is to mount SunOS root partition, and to use mount point described here in /etc/vfstab.

    $ok;
}

sub log_sizes {
    my ($o) = @_;
    my @df = MDK::Common::System::df($o->{prefix});
    log::l(sprintf "Installed: %s(df), %s(rpm)",
	   formatXiB($df[0] - $df[1], 1024),
	   formatXiB(sum(`$ENV{LD_LOADER} rpm --root $o->{prefix}/ -qa --queryformat "%{size}\n"`))) if -x "$o->{prefix}/bin/rpm";
}

sub copy_advertising {
    my ($o) = @_;

    return if $::rootwidth < 800;

    my $f;
    my $source_dir = "Mandrake/share/advertising";
    foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
	$f = getFile("$source_dir$_/list") or next;
	$source_dir = "$source_dir$_";
    }
    if (my @files = <$f>) {
	my $dir = "$o->{prefix}/tmp/drakx-images";
	mkdir $dir;
	unlink glob_("$dir/*");
	foreach (@files) {
	    chomp;
	    getAndSaveFile("$source_dir/$_", "$dir/$_");
	    s/\.png/\.pl/;
	    getAndSaveFile("$source_dir/$_", "$dir/$_");
	    s/\.pl/_icon\.png/;
	    getAndSaveFile("$source_dir/$_", "$dir/$_");
	    s/_icon\.png/\.png/;
	}
	@advertising_images = map { "$dir/$_" } @files;
    }
}

sub remove_advertising {
    my ($o) = @_;
    eval { rm_rf("$o->{prefix}/tmp/drakx-images") };
    @advertising_images = ();
}

sub disable_user_view {
    my ($prefix) = @_;
    substInFile { s/^UserView=.*/UserView=true/ } "$prefix/usr/share/config/kdm/kdmrc";
    substInFile { s/^Browser=.*/Browser=0/ } "$prefix/etc/X11/gdm/gdm.conf";
}

sub write_fstab {
    my ($o) = @_;
    fs::write_fstab($o->{all_hds}, $o->{prefix}) if !$::live;
}

my @bigseldom_used_groups = (
);

sub check_prog {
    my ($f) = @_;

    my @l = $f !~ m|^/| ?
        map { "$_/$f" } split(":", $ENV{PATH}) :
	$f;
    return if grep { -x $_ } @l;

    common::usingRamdisk() or log::l("ERROR: check_prog can't find the program $f and we're not using ramdisk"), return;

    my ($f_) = map { m|^/| ? $_ : "/usr/bin/$_" } $f;
    remove_bigseldom_used();
    foreach (@bigseldom_used_groups) {
	my (@l) = map { m|^/| ? $_ : "/usr/bin/$_" } @$_;
	if (member($f_, @l)) {
	    foreach (@l) {
		getAndSaveFile($_);
		chmod 0755, $_;
	    }
	    return;
	}
    }
    getAndSaveFile($f_);
    chmod 0755, $f_;
}

sub remove_unused {
    $::testing and return;
    if ($::o->isa('interactive_gtk')) {
	unlink glob_("/lib/lib$_*") foreach qw(slang newt);
	unlink "/usr/bin/perl-install/auto/Newt/Newt.so";
    } else {
	unlink glob_("/usr/X11R6/bin/XF*");
    }
}

sub remove_bigseldom_used {
    log::l("remove_bigseldom_used");
    $::testing and return;
    remove_unused();
    unlink "/usr/X11R6/lib/modules/xf86Wacom.so";
    unlink glob_("/usr/share/gtk/themes/$_*") foreach qw(marble3d);
    unlink(m|^/| ? $_ : "/usr/bin/$_") foreach 
      ((map { @$_ } @bigseldom_used_groups),
       qw(pvcreate pvdisplay vgchange vgcreate vgdisplay vgextend vgremove vgscan lvcreate lvdisplay lvremove /lib/liblvm.so),
       qw(mkreiserfs resize_reiserfs mkfs.xfs),
      );
}

################################################################################
package pkgs_interactive;
use run_program;
use common;
use pkgs;

sub install_steps::do_pkgs {
    my ($o) = @_;
    bless { o => $o }, 'pkgs_interactive';
}

sub install {
    my ($do, @l) = @_;
    $do->{o}->pkg_install(@l);
}

sub is_installed {
    my ($do, @l) = @_;
    foreach (@l) {
	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
	$p && pkgs::packageFlagSelected($p) or return;
    }
    1;
}

sub remove {
    my ($do, @l) = @_;

    @l = grep {
	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
	pkgs::unselectPackage($do->{o}->{packages}, $p) if $p;
	$p;
    } @l;
    run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', @l);
}

sub remove_nodeps {
    my ($do, @l) = @_;

    @l = grep {
	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
	pkgs::packageSetFlagSelected($p, 0) if $p;
	$p;
    } @l;
    run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', '--nodeps', @l);
}
################################################################################

package install_any;

1;
generated by cgit v1.2.1 (git 2.21.0) at 2024-12-21 06:10:22 +0000