summaryrefslogtreecommitdiffstats
path: root/perl-install/standalone/drakroam
diff options
context:
space:
mode:
authorOlivier Blin <oblin@mandriva.org>2004-08-11 14:45:14 +0000
committerOlivier Blin <oblin@mandriva.org>2004-08-11 14:45:14 +0000
commit7a1c2b1e9514f9cd6113a6083315dd7ad2674424 (patch)
treea910b5a9a065b7c600fe3c37ec33ad1380a538e1 /perl-install/standalone/drakroam
parent607740569bdb2326d3490a5b1cf9268815ca66d9 (diff)
downloaddrakx-backup-do-not-use-7a1c2b1e9514f9cd6113a6083315dd7ad2674424.tar
drakx-backup-do-not-use-7a1c2b1e9514f9cd6113a6083315dd7ad2674424.tar.gz
drakx-backup-do-not-use-7a1c2b1e9514f9cd6113a6083315dd7ad2674424.tar.bz2
drakx-backup-do-not-use-7a1c2b1e9514f9cd6113a6083315dd7ad2674424.tar.xz
drakx-backup-do-not-use-7a1c2b1e9514f9cd6113a6083315dd7ad2674424.zip
prepare for multiple roaming daemons support
Diffstat (limited to 'perl-install/standalone/drakroam')
-rwxr-xr-xperl-install/standalone/drakroam140
1 files changed, 82 insertions, 58 deletions
diff --git a/perl-install/standalone/drakroam b/perl-install/standalone/drakroam
index f3882afb3..cfad91c3a 100755
--- a/perl-install/standalone/drakroam
+++ b/perl-install/standalone/drakroam
@@ -31,28 +31,94 @@ use Gtk2::SimpleList;
require_root_capability();
# global settings
-my $config = '/etc/wlandetect.conf';
my $route = '/sbin/route';
my $AboutFile = 'ABOUT';
my $HelpFile = 'README';
-my $WLanDetect = '/usr/sbin/wlandetect';
my $IWList = '/sbin/iwlist';
my $IWConfig = '/sbin/iwconfig';
my $IFConfig = '/sbin/ifconfig';
my $IFUp = '/sbin/ifup';
my $IFDown = '/sbin/ifdown';
my $DHClient = '/sbin/dhclient';
-my $device;
# initialize variables
my $ScanInterval = 30; # tell deamon to search for new nets every x seconds
+my ($KnownList, $AvailableList);
+my $device;
+
+my %available_roaming_daemons = (
+ wlandetect => {
+ config_file => '/etc/wlandetect.conf',
+ binary => '/usr/sbin/wlandetect',
+ start_options => sub {
+ my ($interval) = @_;
+ "-d -t $interval";
+ },
+ read_config => sub {
+ my ($config) = @_;
+ my $line = 0;
+ foreach (cat_($config)) {
+ $line++;
+ if (/^#/) {} #ignore comments
+ elsif (/^\n/) {} #ignore blank lines
+ elsif (/([^ \t]+)([ \t]+)(.*)/) {
+ my $essid = $1;
+ my $command = $3;
+ # setup new network entry
+ my $mode;
+ my $channel;
+ my $key;
+ my $dhcp;
+ if ($command =~ /mode\s(\S*);/) { $mode = $1 }
+ elsif ($command =~ /mode\s(\S*)\s/) { $mode = $1 }
+ if ($command =~ /channel\s(\S*);/) { $channel = $1 }
+ elsif ($command =~ /channel\s(\S*)\s/) { $channel = $1 }
+ if ($command =~ /key\s(\S*);/) { $key = $1 }
+ elsif ($command =~ /key\s(\S*)\s/) { $key = $1 }
+ if ($command =~ /dhclient/) { $dhcp = 1 }
+ else { $dhcp = 0 }
+ &AddNet($essid, $mode, $channel, $key, $dhcp);
+ }
+ else { die "Line $line of configuration file is not parseable.\n" }
+ }
+ },
+ write_config => sub {
+ my ($config) = @_;
+ open(my $CONFIG, "> $config") or die("Can't open configuration file\n");
+ print $CONFIG "#wlandetect configuration file\n#format: essid<tab><tab>commands\n#use \@DEV\@ for device name\n";
+ foreach my $row (@{$KnownList->{data}}) { # again, lame
+ print $CONFIG "$row->[0]\t\t$IWConfig essid $row->[0]";
+ if ($row->[1]) {
+ print $CONFIG "mode $row->[1] ";
+ }
+ if ($row->[2]) {
+ print $CONFIG "channel $row->[2] ";
+ }
+ if ($row->[3]) {
+ print $CONFIG "key $row->[3] ";
+ }
+ print $CONFIG "; ";
+ if ($row->[4]) {
+ print $CONFIG "$IFConfig \@DEV\@ up; $DHClient \@DEV\@";
+ }
+ else {
+ print $CONFIG "$IFUp \@DEV\@"
+ }
+ print $CONFIG "\n";
+ }
+ close $CONFIG;
+ },
+ },
+);
+
+my $roaming_daemon = $available_roaming_daemons{wlandetect};
my $ScanEntry = Gtk2::Entry->new;
$ScanEntry->set_width_chars(4);
$ScanEntry->set_text($ScanInterval);
-my $KnownList = Gtk2::SimpleList->new(
+$KnownList = Gtk2::SimpleList->new(
"ESSID" => "text",
"Mode" => "text",
"Channel" => "int",
@@ -65,7 +131,7 @@ $KnownList->set_column_editable(1, TRUE); # allow to change mode
$KnownList->set_column_editable(2, TRUE); # allow to change channel
$KnownList->set_column_editable(3, TRUE); # allow to change key
-my $AvailableList = Gtk2::SimpleList->new(
+$AvailableList = Gtk2::SimpleList->new(
"ESSID" => "text",
"Type" => "text",
"Encryption" => "text",
@@ -166,7 +232,8 @@ sub UpdateAll {
}
sub UpdateRoaming() {
- my $status = (any { /wlandetect$/ } run_program::get_stdout("ps", "-A")) ? "on" : "off";
+ my $name = basename($roaming_daemon->{binary});
+ my $status = (any { /\Q$name\E$/ } run_program::get_stdout("ps", "-A")) ? "on" : "off";
$RoamStatus->set_text("Roaming: $status");
return FALSE; #- do not update again if launched on timeout
}
@@ -225,73 +292,30 @@ sub AddNet {
}
sub ReadConfig() {
- print "Reading config file.\n\n";
- my $line = 0;
- foreach (cat_($config)) {
- $line++;
- if (/^#/) {} #ignore comments
- elsif (/^\n/) {} #ignore blank lines
- elsif (/([^ \t]+)([ \t]+)(.*)/) {
- my $essid = $1;
- my $command = $3;
- # setup new network entry
- my $mode;
- my $channel;
- my $key;
- my $dhcp;
- if ($command =~ /mode\s(\S*);/) { $mode = $1 }
- elsif ($command =~ /mode\s(\S*)\s/) { $mode = $1 }
- if ($command =~ /channel\s(\S*);/) { $channel = $1 }
- elsif ($command =~ /channel\s(\S*)\s/) { $channel = $1 }
- if ($command =~ /key\s(\S*);/) { $key = $1 }
- elsif ($command =~ /key\s(\S*)\s/) { $key = $1 }
- if ($command =~ /dhclient/) { $dhcp = 1 }
- else { $dhcp = 0 }
- &AddNet($essid, $mode, $channel, $key, $dhcp);
- }
- else { die "Line $line of configuration file is not parseable.\n" }
- }
+ $_->{read_config}($_->{config_file}) foreach values %available_roaming_daemons;
}
sub WriteConfig() {
- open(my $CONFIG, "> $config") or die("Can't open configuration file\n");
- print $CONFIG "#wlandetect configuration file\n#format: essid<tab><tab>commands\n#use \@DEV\@ for device name\n";
- foreach my $row (@{$KnownList->{data}}) { # again, lame
- print $CONFIG "$row->[0]\t\t$IWConfig essid $row->[0]";
- if ($row->[1]) {
- print $CONFIG "mode $row->[1] ";
- }
- if ($row->[2]) {
- print $CONFIG "channel $row->[2] ";
- }
- if ($row->[3]) {
- print $CONFIG "key $row->[3] ";
- }
- print $CONFIG "; ";
- if ($row->[4]) {
- print $CONFIG "$IFConfig \@DEV\@ up; $DHClient \@DEV\@";
- }
- else {
- print $CONFIG "$IFUp \@DEV\@"
- }
- print $CONFIG "\n";
- }
- close $CONFIG;
+ $_->{write_config}($_->{config_file}) foreach values %available_roaming_daemons;
}
sub StartRoam() {
- system("killall wlandetect; $WLanDetect -d -t $ScanInterval &");
+ my $options = $roaming_daemon->{start_options}($ScanInterval, $device);
+ my $name = basename($roaming_daemon->{binary});
+ system("killall $name; $roaming_daemon->{binary} $options &");
Glib::Timeout->add(1000, \&UpdateRoaming);
}
sub StopRoam() {
- system("killall wlandetect");
+ my $name = basename($roaming_daemon->{binary});
+ system("killall $name");
Glib::Timeout->add(1000, \&UpdateRoaming);
}
sub SetInterval() {
$ScanInterval = $ScanEntry->get_text;
- system("killall wlandetect; $WLanDetect -d -t $ScanInterval &");
+ StopRoam();
+ StartRoam();
}
sub ConnectNow {