updated pot file

2 files changed, 148 insertions, 146 deletions

diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
index 77d168c4a..67174fb60 100644
--- a/perl-install/share/po/DrakX.pot
+++ b/perl-install/share/po/DrakX.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2003-08-18 17:35+0200\n"
+"POT-Creation-Date: 2003-08-19 09:41+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -4996,11 +4996,6 @@ msgstr ""
 msgid "Not the correct tape label. Tape is labelled %s."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "For a mulitsession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup."
-msgstr ""
-
 #: ../../standalone/drakgw:1
 #, c-format
 msgid ""
@@ -12198,62 +12193,6 @@ msgstr ""
 msgid "Empty"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented with a list of different parameters to change to get\n"
-"an optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then asked to choose the server that best\n"
-"suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is correct, you can choose from\n"
-"this list the monitor you actually have connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"hardware. Choose the one that best suits your needs (you will be able to\n"
-"change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"%s\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-
 #: ../../standalone/draksplash:1
 #, c-format
 msgid "text width"
@@ -12932,6 +12871,11 @@ msgstr ""
 msgid "The encryption keys do not match"
 msgstr ""
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup."
+msgstr ""
+
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Right \"Windows\" key"
@@ -14054,6 +13998,62 @@ msgstr ""
 msgid "Authentication NIS"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is not correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+
 #: ../../any.pm:1
 #, c-format
 msgid "Option ``Restrict command line options'' is of no use without a password"
@@ -15939,6 +15939,16 @@ msgstr ""
 msgid "Check permissions of files in the users' home"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is not correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Run \"sndconfig\" after installation to configure your sound card"
@@ -16381,16 +16391,6 @@ msgid ""
 "Have a look at /etc/services for information."
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is correct, you can choose from\n"
-"this list the monitor you actually have connected to your computer."
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
diff --git a/perl-install/share/po/uz@Cyrl.po b/perl-install/share/po/uz@Cyrl.po
index cd23a7258..71f921fc6 100644
--- a/perl-install/share/po/uz@Cyrl.po
+++ b/perl-install/share/po/uz@Cyrl.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-uz@Cyrl\n"
-"POT-Creation-Date: 2003-08-18 17:35+0200\n"
+"POT-Creation-Date: 2003-08-19 09:41+0200\n"
 "PO-Revision-Date: 2003-08-18 01:08+0200\n"
 "Last-Translator: Mashrab Kuvatov <kmashrab@uni-bremen.de>\n"
 "Language-Team: Uzbek <uz-li@yahoogroups.com>\n"
@@ -5430,13 +5430,6 @@ msgstr "Пайшанба"
 msgid "Not the correct tape label. Tape is labelled %s."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"For a mulitsession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-
 #: ../../standalone/drakgw:1
 #, c-format
 msgid ""
@@ -13076,62 +13069,6 @@ msgstr "Мавжуд бўлган принтерлар"
 msgid "Empty"
 msgstr "Бўш"
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented with a list of different parameters to change to get\n"
-"an optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then asked to choose the server that best\n"
-"suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is correct, you can choose from\n"
-"this list the monitor you actually have connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"hardware. Choose the one that best suits your needs (you will be able to\n"
-"change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"%s\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-
 #: ../../standalone/draksplash:1
 #, c-format
 msgid "text width"
@@ -13865,6 +13802,13 @@ msgstr "ГИД-ни ўрнатиш"
 msgid "The encryption keys do not match"
 msgstr "Кодлаш калитлари мос келмайди"
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"For a multisession CD, only the first session will erase the cdrw. Otherwise "
+"the cdrw is erased before each backup."
+msgstr ""
+
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Right \"Windows\" key"
@@ -15056,6 +15000,63 @@ msgstr ""
 msgid "Authentication NIS"
 msgstr "Тасдиқловчи NIS"
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is not correct, you can choose "
+"from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+
 #: ../../any.pm:1
 #, c-format
 msgid ""
@@ -17061,6 +17062,17 @@ msgstr "Илтимос CD/DVD'нинг ҳажмини танланг (Мб)"
 msgid "Check permissions of files in the users' home"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is not correct, you can choose "
+"from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Run \"sndconfig\" after installation to configure your sound card"
@@ -17516,16 +17528,6 @@ msgstr ""
 "Масалан: 139/tcp 139/udp.\n"
 "Маълумот учун /etc/services файлига қаранг."
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is correct, you can choose from\n"
-"this list the monitor you actually have connected to your computer."
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "\t-Tape \n"