Updated POT file

1 files changed, 325 insertions, 320 deletions

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index 6794e5d5c..f9f9589c7 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -18,7 +18,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2005-10-28 23:26+0800\n"
+"POT-Creation-Date: 2005-11-18 16:24+0100\n"
 "PO-Revision-Date: 2005-10-25 12:01+0800\n"
 "Last-Translator: Shiva Huang <shivahuang@gmail.com>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -176,10 +176,10 @@ msgstr "請稍候，正在偵測與設定裝置中..."
 #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
-#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
-#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
-#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:216 install_any.pm:1777
-#: install_any.pm:1829 install_steps.pm:81 install_steps_interactive.pm:37
+#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:559
+#: diskdrake/interactive.pm:564 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
+#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1776
+#: install_any.pm:1828 install_steps.pm:81 install_steps_interactive.pm:37
 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
 #: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
@@ -213,9 +213,9 @@ msgstr "請稍候，正在偵測與設定裝置中..."
 #: printer/printerdrake.pm:3208 printer/printerdrake.pm:3214
 #: printer/printerdrake.pm:3779 printer/printerdrake.pm:3783
 #: printer/printerdrake.pm:3787 printer/printerdrake.pm:4183
-#: printer/printerdrake.pm:4424 printer/printerdrake.pm:4452
-#: printer/printerdrake.pm:4529 printer/printerdrake.pm:4595
-#: printer/printerdrake.pm:4715 standalone/drakTermServ:394
+#: printer/printerdrake.pm:4423 printer/printerdrake.pm:4451
+#: printer/printerdrake.pm:4528 printer/printerdrake.pm:4594
+#: printer/printerdrake.pm:4714 standalone/drakTermServ:394
 #: standalone/drakTermServ:464 standalone/drakTermServ:473
 #: standalone/drakTermServ:774 standalone/drakTermServ:781
 #: standalone/drakTermServ:802 standalone/drakTermServ:849
@@ -329,8 +329,8 @@ msgid "No CDROM support"
 msgstr "沒有光碟機支援"
 
 #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
-#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
-#: diskdrake/interactive.pm:1115
+#: diskdrake/interactive.pm:1061 diskdrake/interactive.pm:1071
+#: diskdrake/interactive.pm:1124
 #, c-format
 msgid "Read carefully!"
 msgstr "仔細閱讀！"
@@ -428,52 +428,52 @@ msgstr "無法安裝 Xorg 套件：%s"
 msgid "Select the memory size of your graphics card"
 msgstr "選擇顯示卡上的記憶體大小"
 
-#: Xconfig/card.pm:367
+#: Xconfig/card.pm:372
 #, c-format
 msgid "Xorg configuration"
 msgstr "Xorg 設定"
 
-#: Xconfig/card.pm:369
+#: Xconfig/card.pm:374
 #, c-format
 msgid "Which configuration of Xorg do you want to have?"
 msgstr "您想要用哪一個 Xorg 設定？"
 
-#: Xconfig/card.pm:402
+#: Xconfig/card.pm:407
 #, c-format
 msgid "Configure all heads independently"
 msgstr "獨立設定所有顯示器輸出端"
 
-#: Xconfig/card.pm:403
+#: Xconfig/card.pm:408
 #, c-format
 msgid "Use Xinerama extension"
 msgstr "使用 Xinerama 全景延伸顯示"
 
-#: Xconfig/card.pm:408
+#: Xconfig/card.pm:413
 #, c-format
 msgid "Configure only card \"%s\"%s"
 msgstr "僅設定 \"%s\"%s 顯示卡"
 
-#: Xconfig/card.pm:420 Xconfig/various.pm:23
+#: Xconfig/card.pm:425 Xconfig/various.pm:23
 #, c-format
 msgid "Xorg %s"
 msgstr "Xorg %s"
 
-#: Xconfig/card.pm:427 Xconfig/various.pm:22
+#: Xconfig/card.pm:432 Xconfig/various.pm:22
 #, c-format
 msgid "Xorg %s with 3D hardware acceleration"
 msgstr "Xorg %s 包含 3D 硬體加速功能"
 
-#: Xconfig/card.pm:429
+#: Xconfig/card.pm:434
 #, c-format
 msgid "Your card can have 3D hardware acceleration support with Xorg %s."
 msgstr "您的顯示卡搭配 Xorg %s 可以有 3D 硬體加速功能。"
 
-#: Xconfig/card.pm:435
+#: Xconfig/card.pm:440
 #, c-format
 msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
 msgstr "Xorg %s 搭配實驗性質的 3D 硬體加速"
 
-#: Xconfig/card.pm:437
+#: Xconfig/card.pm:442
 #, c-format
 msgid ""
 "Your card can have 3D hardware acceleration support with Xorg %s,\n"
@@ -490,7 +490,7 @@ msgstr "自訂"
 #: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
 #: install_steps_interactive.pm:86 install_steps_interactive.pm:1332
 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899
-#: printer/printerdrake.pm:4524 printer/printerdrake.pm:4988
+#: printer/printerdrake.pm:4523 printer/printerdrake.pm:4987
 #: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
 #: standalone/logdrake:176 standalone/net_applet:103
 #: standalone/scannerdrake:477
@@ -954,7 +954,7 @@ msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1326
+#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1335
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
@@ -1082,7 +1082,7 @@ msgstr "Initrd"
 msgid "Network profile"
 msgstr "網路 profile"
 
-#: any.pm:385 any.pm:390 any.pm:392
+#: any.pm:385 any.pm:390 any.pm:392 diskdrake/interactive.pm:449
 #, c-format
 msgid "Label"
 msgstr "標籤"
@@ -1255,7 +1255,7 @@ msgstr ""
 #: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
 #: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4988
+#: printer/printerdrake.pm:382 printer/printerdrake.pm:4987
 #: standalone/drakbackup:2813 standalone/scannerdrake:668
 #: standalone/scannerdrake:818
 #, c-format
@@ -1378,7 +1378,7 @@ msgstr "進階"
 msgid "Input method:"
 msgstr "輸入法："
 
-#: any.pm:856 install_any.pm:423 network/netconnect.pm:318
+#: any.pm:856 install_any.pm:422 network/netconnect.pm:318
 #: network/netconnect.pm:323 network/netconnect.pm:1234 network/wireless.pm:7
 #: printer/printerdrake.pm:105
 #, c-format
@@ -1437,7 +1437,7 @@ msgstr "啟動 userdrake"
 
 #: any.pm:1025 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
 #: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
-#: printer/printerdrake.pm:5306 standalone/drakTermServ:294
+#: printer/printerdrake.pm:5305 standalone/drakTermServ:294
 #: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:500
 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
 #: standalone/draknfs:210 standalone/net_monitor:117
@@ -2048,18 +2048,18 @@ msgstr ""
 msgid "New"
 msgstr "新增"
 
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
+#: diskdrake/dav.pm:61 diskdrake/interactive.pm:455 diskdrake/smbnfs_gtk.pm:74
 #, c-format
 msgid "Unmount"
 msgstr "卸載"
 
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
+#: diskdrake/dav.pm:62 diskdrake/interactive.pm:452 diskdrake/smbnfs_gtk.pm:75
 #, c-format
 msgid "Mount"
 msgstr "掛載"
 
 #: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
-#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
+#: diskdrake/interactive.pm:678 diskdrake/interactive.pm:697
 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
 #, c-format
 msgid "Mount point"
@@ -2080,13 +2080,13 @@ msgstr "URL 格式必須為 http:// 或是 https://"
 msgid "Server: "
 msgstr "伺服器："
 
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
-#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
+#: diskdrake/dav.pm:110 diskdrake/interactive.pm:522
+#: diskdrake/interactive.pm:1217 diskdrake/interactive.pm:1295
 #, c-format
 msgid "Mount point: "
 msgstr "掛載點："
 
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
+#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1302
 #, c-format
 msgid "Options: %s"
 msgstr "選項： %s"
@@ -2173,7 +2173,7 @@ msgstr "HFS"
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
+#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1232
 #, c-format
 msgid "Empty"
 msgstr "空白"
@@ -2188,13 +2188,13 @@ msgstr "檔案系統格式："
 msgid "Use ``%s'' instead"
 msgstr "用 ``%s'' 代替"
 
-#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
+#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:471
 #, c-format
 msgid "Create"
 msgstr "建立"
 
 #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
-#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
+#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:624
 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48
 #: standalone/harddrake2:108 standalone/harddrake2:117
 #, c-format
@@ -2202,7 +2202,7 @@ msgid "Type"
 msgstr "格式"
 
 #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
+#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:456
 #: standalone/drakperm:123 standalone/printerdrake:248
 #, c-format
 msgid "Delete"
@@ -2381,77 +2381,77 @@ msgstr "正在試圖救回硬碟分割表"
 msgid "Detailed information"
 msgstr "詳細資訊"
 
-#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
+#: diskdrake/interactive.pm:450 diskdrake/interactive.pm:768
 #, c-format
 msgid "Resize"
 msgstr "重新變更大小"
 
-#: diskdrake/interactive.pm:450
+#: diskdrake/interactive.pm:451
 #, c-format
 msgid "Format"
 msgstr "格式化"
 
-#: diskdrake/interactive.pm:452
+#: diskdrake/interactive.pm:453
 #, c-format
 msgid "Add to RAID"
 msgstr "加入到磁碟陣列"
 
-#: diskdrake/interactive.pm:453
+#: diskdrake/interactive.pm:454
 #, c-format
 msgid "Add to LVM"
 msgstr "加入到 LVM"
 
-#: diskdrake/interactive.pm:456
+#: diskdrake/interactive.pm:457
 #, c-format
 msgid "Remove from RAID"
 msgstr "由磁碟陣列中移除"
 
-#: diskdrake/interactive.pm:457
+#: diskdrake/interactive.pm:458
 #, c-format
 msgid "Remove from LVM"
 msgstr "由 LVM 中移除"
 
-#: diskdrake/interactive.pm:458
+#: diskdrake/interactive.pm:459
 #, c-format
 msgid "Modify RAID"
 msgstr "變更磁碟陣列"
 
-#: diskdrake/interactive.pm:459
+#: diskdrake/interactive.pm:460
 #, c-format
 msgid "Use for loopback"
 msgstr "作為 loopback"
 
-#: diskdrake/interactive.pm:514
+#: diskdrake/interactive.pm:515
 #, c-format
 msgid "Create a new partition"
 msgstr "建立新的分割區"
 
-#: diskdrake/interactive.pm:517
+#: diskdrake/interactive.pm:518
 #, c-format
 msgid "Start sector: "
 msgstr "開始的磁區："
 
-#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
+#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:937
 #, c-format
 msgid "Size in MB: "
 msgstr "大小 (MB)："
 
-#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
+#: diskdrake/interactive.pm:521 diskdrake/interactive.pm:938
 #, c-format
 msgid "Filesystem type: "
 msgstr "檔案系統格式："
 
-#: diskdrake/interactive.pm:525
+#: diskdrake/interactive.pm:526
 #, c-format
 msgid "Preference: "
 msgstr "偏好設定："
 
-#: diskdrake/interactive.pm:528
+#: diskdrake/interactive.pm:529
 #, c-format
 msgid "Logical volume name "
 msgstr "邏輯磁區名稱"
 
-#: diskdrake/interactive.pm:558
+#: diskdrake/interactive.pm:559
 #, c-format
 msgid ""
 "You can not create a new partition\n"
@@ -2462,43 +2462,48 @@ msgstr ""
 "(因為您已經達到主分割區的最大值)。\n"
 "您需要先移除一個主分割區然後建立一個延伸分割區。"
 
-#: diskdrake/interactive.pm:588
+#: diskdrake/interactive.pm:589
 #, c-format
 msgid "Remove the loopback file?"
 msgstr "移除 loopback 檔案？"
 
-#: diskdrake/interactive.pm:607
+#: diskdrake/interactive.pm:608
 #, c-format
 msgid ""
 "After changing type of partition %s, all data on this partition will be lost"
 msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:619
+#: diskdrake/interactive.pm:620
 #, c-format
 msgid "Change partition type"
 msgstr "改變分割區格式"
 
-#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:621 diskdrake/removable.pm:47
 #, c-format
 msgid "Which filesystem do you want?"
 msgstr "您要用那一種檔案系統？"
 
-#: diskdrake/interactive.pm:628
+#: diskdrake/interactive.pm:629
 #, c-format
 msgid "Switching from ext2 to ext3"
 msgstr "由 ext2 正在切換到 ext3"
 
-#: diskdrake/interactive.pm:657
+#: diskdrake/interactive.pm:649
+#, c-format
+msgid "Which volume label?"
+msgstr ""
+
+#: diskdrake/interactive.pm:665
 #, c-format
 msgid "Where do you want to mount the loopback file %s?"
 msgstr "您要把 loopback 檔案 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:658
+#: diskdrake/interactive.pm:666
 #, c-format
 msgid "Where do you want to mount device %s?"
 msgstr "您要把這個裝置 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:663
+#: diskdrake/interactive.pm:671
 #, c-format
 msgid ""
 "Can not unset mount point as this partition is used for loop back.\n"
@@ -2507,48 +2512,48 @@ msgstr ""
 "因為這個分割區被用作 loop back 使用，所以無法解除\n"
 "這個掛載點。請先取消 loopback 的設定"
 
-#: diskdrake/interactive.pm:688
+#: diskdrake/interactive.pm:696
 #, c-format
 msgid "Where do you want to mount %s?"
 msgstr "您要將 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
+#: diskdrake/interactive.pm:720 diskdrake/interactive.pm:799
 #: install_interactive.pm:156 install_interactive.pm:188
 #, c-format
 msgid "Resizing"
 msgstr "正在重設大小"
 
-#: diskdrake/interactive.pm:712
+#: diskdrake/interactive.pm:720
 #, c-format
 msgid "Computing FAT filesystem bounds"
 msgstr "正在計算 FAT 分割區的邊界"
 
-#: diskdrake/interactive.pm:748
+#: diskdrake/interactive.pm:756
 #, c-format
 msgid "This partition is not resizeable"
 msgstr "這個分割區無法重新調整大小"
 
-#: diskdrake/interactive.pm:753
+#: diskdrake/interactive.pm:761
 #, c-format
 msgid "All data on this partition should be backed-up"
 msgstr "所有在這個分割區上的資料都應該先經過備份"
 
-#: diskdrake/interactive.pm:755
+#: diskdrake/interactive.pm:763
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:760
+#: diskdrake/interactive.pm:768
 #, c-format
 msgid "Choose the new size"
 msgstr "選取新的大小"
 
-#: diskdrake/interactive.pm:761
+#: diskdrake/interactive.pm:769
 #, c-format
 msgid "New size in MB: "
 msgstr "新大小 (MB)："
 
-#: diskdrake/interactive.pm:802 install_interactive.pm:196
+#: diskdrake/interactive.pm:810 install_interactive.pm:196
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s), \n"
@@ -2557,130 +2562,130 @@ msgstr ""
 "為確保重新調整分割區大小後的資料正確性，當您下次從 Windows(TM)\n"
 "開機時便會執行檔案系統檢查。"
 
-#: diskdrake/interactive.pm:843
+#: diskdrake/interactive.pm:851
 #, c-format
 msgid "Choose an existing RAID to add to"
 msgstr "選取一存在的磁碟陣列加入到"
 
-#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862
+#: diskdrake/interactive.pm:853 diskdrake/interactive.pm:870
 #, c-format
 msgid "new"
 msgstr "新增"
 
-#: diskdrake/interactive.pm:860
+#: diskdrake/interactive.pm:868
 #, c-format
 msgid "Choose an existing LVM to add to"
 msgstr "選取一個已經存在的 LVM 以加入"
 
-#: diskdrake/interactive.pm:866
+#: diskdrake/interactive.pm:874
 #, c-format
 msgid "LVM name?"
 msgstr "LVM 名稱？"
 
-#: diskdrake/interactive.pm:894
+#: diskdrake/interactive.pm:902
 #, c-format
 msgid ""
 "Physical volume %s is still in use.\n"
 "Do you want to move used physical extents on this volume to other volumes?"
 msgstr ""
 
-#: diskdrake/interactive.pm:896
+#: diskdrake/interactive.pm:904
 #, c-format
 msgid "Moving physical extents"
 msgstr ""
 
-#: diskdrake/interactive.pm:914
+#: diskdrake/interactive.pm:922
 #, c-format
 msgid "This partition can not be used for loopback"
 msgstr "這個分割區不能用來作為 loopback"
 
-#: diskdrake/interactive.pm:927
+#: diskdrake/interactive.pm:935
 #, c-format
 msgid "Loopback"
 msgstr "Loopback"
 
-#: diskdrake/interactive.pm:928
+#: diskdrake/interactive.pm:936
 #, c-format
 msgid "Loopback file name: "
 msgstr "Loopback 檔案名稱："
 
-#: diskdrake/interactive.pm:933
+#: diskdrake/interactive.pm:941
 #, c-format
 msgid "Give a file name"
 msgstr "輸入一個檔案名稱"
 
-#: diskdrake/interactive.pm:936
+#: diskdrake/interactive.pm:944
 #, c-format
 msgid "File is already used by another loopback, choose another one"
 msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案"
 
-#: diskdrake/interactive.pm:937
+#: diskdrake/interactive.pm:945
 #, c-format
 msgid "File already exists. Use it?"
 msgstr "檔案已經存在了。要使用它嗎？"
 
-#: diskdrake/interactive.pm:960
+#: diskdrake/interactive.pm:968
 #, c-format
 msgid "Mount options"
 msgstr "掛載參數"
 
-#: diskdrake/interactive.pm:967
+#: diskdrake/interactive.pm:975
 #, c-format
 msgid "Various"
 msgstr "各種的"
 
-#: diskdrake/interactive.pm:1034
+#: diskdrake/interactive.pm:1043
 #, c-format
 msgid "device"
 msgstr "裝置"
 
-#: diskdrake/interactive.pm:1035
+#: diskdrake/interactive.pm:1044
 #, c-format
 msgid "level"
 msgstr "階層"
 
-#: diskdrake/interactive.pm:1036
+#: diskdrake/interactive.pm:1045
 #, c-format
 msgid "chunk size in KiB"
 msgstr "組塊大小以 KiB 計量"
 
-#: diskdrake/interactive.pm:1053
+#: diskdrake/interactive.pm:1062
 #, c-format
 msgid "Be careful: this operation is dangerous."
 msgstr "請小心：這個動作很危險。"
 
-#: diskdrake/interactive.pm:1068
+#: diskdrake/interactive.pm:1077
 #, c-format
 msgid "What type of partitioning?"
 msgstr "以那種形式分割？"
 
-#: diskdrake/interactive.pm:1106
+#: diskdrake/interactive.pm:1115
 #, c-format
 msgid "You'll need to reboot before the modification can take place"
 msgstr "您需要重新開機以便於讓異動的設定生效"
 
-#: diskdrake/interactive.pm:1115
+#: diskdrake/interactive.pm:1124
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk!"
 msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！"
 
-#: diskdrake/interactive.pm:1138
+#: diskdrake/interactive.pm:1147
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:1154
+#: diskdrake/interactive.pm:1163
 #, c-format
 msgid "Move files to the new partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1154 standalone/draksambashare:81
+#: diskdrake/interactive.pm:1163 standalone/draksambashare:81
 #: standalone/draksambashare:144
 #, c-format
 msgid "Hide files"
 msgstr "隱藏檔案"
 
-#: diskdrake/interactive.pm:1155
+#: diskdrake/interactive.pm:1164
 #, c-format
 msgid ""
 "Directory %s already contains data\n"
@@ -2689,108 +2694,108 @@ msgstr ""
 "%s 目錄已經包含資料了\n"
 "(%s)"
 
-#: diskdrake/interactive.pm:1166
+#: diskdrake/interactive.pm:1175
 #, c-format
 msgid "Moving files to the new partition"
 msgstr "正在將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1170
+#: diskdrake/interactive.pm:1179
 #, c-format
 msgid "Copying %s"
 msgstr "正在複製 %s"
 
-#: diskdrake/interactive.pm:1174
+#: diskdrake/interactive.pm:1183
 #, c-format
 msgid "Removing %s"
 msgstr "正在移除 %s"
 
-#: diskdrake/interactive.pm:1188
+#: diskdrake/interactive.pm:1197
 #, c-format
 msgid "partition %s is now known as %s"
 msgstr "分割區 %s 現在被命名為 %s 了"
 
-#: diskdrake/interactive.pm:1189
+#: diskdrake/interactive.pm:1198
 #, c-format
 msgid "Partitions have been renumbered: "
 msgstr "分割區已經重新編號："
 
-#: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271
+#: diskdrake/interactive.pm:1218 diskdrake/interactive.pm:1280
 #, c-format
 msgid "Device: "
 msgstr "裝置："
 
-#: diskdrake/interactive.pm:1210
+#: diskdrake/interactive.pm:1219
 #, c-format
 msgid "Devfs name: "
 msgstr "Devfs 名稱："
 
-#: diskdrake/interactive.pm:1211
+#: diskdrake/interactive.pm:1220
 #, c-format
 msgid "Volume label: "
 msgstr "磁區標籤："
 
-#: diskdrake/interactive.pm:1212
+#: diskdrake/interactive.pm:1221
 #, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 磁碟代號：%s (猜測值)\n"
 
-#: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225
-#: diskdrake/interactive.pm:1289
+#: diskdrake/interactive.pm:1225 diskdrake/interactive.pm:1234
+#: diskdrake/interactive.pm:1298
 #, c-format
 msgid "Type: "
 msgstr "格式："
 
-#: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300
+#: diskdrake/interactive.pm:1229 install_steps_gtk.pm:300
 #, c-format
 msgid "Name: "
 msgstr "名稱："
 
-#: diskdrake/interactive.pm:1227
+#: diskdrake/interactive.pm:1236
 #, c-format
 msgid "Start: sector %s\n"
 msgstr "始於：第 %s 扇區\n"
 
-#: diskdrake/interactive.pm:1228
+#: diskdrake/interactive.pm:1237
 #, c-format
 msgid "Size: %s"
 msgstr "大小：%s"
 
-#: diskdrake/interactive.pm:1230
+#: diskdrake/interactive.pm:1239
 #, c-format
 msgid ", %s sectors"
 msgstr "，%s 扇區"
 
-#: diskdrake/interactive.pm:1232
+#: diskdrake/interactive.pm:1241
 #, c-format
 msgid "Cylinder %d to %d\n"
 msgstr "%d 磁柱到第 %d 磁柱\n"
 
-#: diskdrake/interactive.pm:1233
+#: diskdrake/interactive.pm:1242
 #, c-format
 msgid "Number of logical extents: %d\n"
 msgstr ""
 
-#: diskdrake/interactive.pm:1234
+#: diskdrake/interactive.pm:1243
 #, c-format
 msgid "Formatted\n"
 msgstr "已格式化\n"
 
-#: diskdrake/interactive.pm:1235
+#: diskdrake/interactive.pm:1244
 #, c-format
 msgid "Not formatted\n"
 msgstr "未格式化\n"
 
-#: diskdrake/interactive.pm:1236
+#: diskdrake/interactive.pm:1245
 #, c-format
 msgid "Mounted\n"
 msgstr "已掛載\n"
 
-#: diskdrake/interactive.pm:1237
+#: diskdrake/interactive.pm:1246
 #, c-format
 msgid "RAID %s\n"
 msgstr "磁碟陣列 %s\n"
 
-#: diskdrake/interactive.pm:1242
+#: diskdrake/interactive.pm:1251
 #, c-format
 msgid ""
 "Loopback file(s):\n"
@@ -2799,7 +2804,7 @@ msgstr ""
 "loopback 檔案：\n"
 "   %s\n"
 
-#: diskdrake/interactive.pm:1243
+#: diskdrake/interactive.pm:1252
 #, c-format
 msgid ""
 "Partition booted by default\n"
@@ -2808,27 +2813,27 @@ msgstr ""
 "預設開機的分割區\n"
 "    (給 MS-DOS 開機程式用的，跟 lilo 無關)\n"
 
-#: diskdrake/interactive.pm:1245
+#: diskdrake/interactive.pm:1254
 #, c-format
 msgid "Level %s\n"
 msgstr "階層 %s\n"
 
-#: diskdrake/interactive.pm:1246
+#: diskdrake/interactive.pm:1255
 #, c-format
 msgid "Chunk size %d KiB\n"
 msgstr "組塊大小 %d KiB\n"
 
-#: diskdrake/interactive.pm:1247
+#: diskdrake/interactive.pm:1256
 #, c-format
 msgid "RAID-disks %s\n"
 msgstr "磁碟陣列-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1249
+#: diskdrake/interactive.pm:1258
 #, c-format
 msgid "Loopback file name: %s"
 msgstr "Loopback 檔案名稱： %s"
 
-#: diskdrake/interactive.pm:1252
+#: diskdrake/interactive.pm:1261
 #, c-format
 msgid ""
 "\n"
@@ -2841,7 +2846,7 @@ msgstr ""
 "是透過驅動程式產生出來的\n"
 "您應該不要去異動這個分割區資料。\n"
 
-#: diskdrake/interactive.pm:1255
+#: diskdrake/interactive.pm:1264
 #, c-format
 msgid ""
 "\n"
@@ -2853,73 +2858,73 @@ msgstr ""
 "這個特殊分割區是用來作為\n"
 "雙重開機使用的。\n"
 
-#: diskdrake/interactive.pm:1272
+#: diskdrake/interactive.pm:1281
 #, c-format
 msgid "Read-only"
 msgstr "唯讀"
 
-#: diskdrake/interactive.pm:1273
+#: diskdrake/interactive.pm:1282
 #, c-format
 msgid "Size: %s\n"
 msgstr "大小：%s\n"
 
-#: diskdrake/interactive.pm:1274
+#: diskdrake/interactive.pm:1283
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n"
 
-#: diskdrake/interactive.pm:1275 network/thirdparty.pm:329
+#: diskdrake/interactive.pm:1284 network/thirdparty.pm:329
 #, c-format
 msgid "Info: "
 msgstr "資訊："
 
-#: diskdrake/interactive.pm:1276
+#: diskdrake/interactive.pm:1285
 #, c-format
 msgid "LVM-disks %s\n"
 msgstr "LVM-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1277
+#: diskdrake/interactive.pm:1286
 #, c-format
 msgid "Partition table type: %s\n"
 msgstr "硬碟分割表形式：%s\n"
 
-#: diskdrake/interactive.pm:1278
+#: diskdrake/interactive.pm:1287
 #, c-format
 msgid "on channel %d id %d\n"
 msgstr "位在通道 %d id %d\n"
 
-#: diskdrake/interactive.pm:1321
+#: diskdrake/interactive.pm:1330
 #, c-format
 msgid "Filesystem encryption key"
 msgstr "檔案系統加密金鑰"
 
-#: diskdrake/interactive.pm:1322
+#: diskdrake/interactive.pm:1331
 #, c-format
 msgid "Choose your filesystem encryption key"
 msgstr "選擇您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:1325
+#: diskdrake/interactive.pm:1334
 #, c-format
 msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"
 
-#: diskdrake/interactive.pm:1326
+#: diskdrake/interactive.pm:1335
 #, c-format
 msgid "The encryption keys do not match"
 msgstr "輸入的加密金鑰不符合"
 
-#: diskdrake/interactive.pm:1329 network/netconnect.pm:1070
+#: diskdrake/interactive.pm:1338 network/netconnect.pm:1070
 #: standalone/drakconnect:419 standalone/drakroam:120
 #, c-format
 msgid "Encryption key"
 msgstr "加密金鑰"
 
-#: diskdrake/interactive.pm:1330
+#: diskdrake/interactive.pm:1339
 #, c-format
 msgid "Encryption key (again)"
 msgstr "再次輸入加密金鑰"
 
-#: diskdrake/interactive.pm:1332 standalone/drakvpn:1017
+#: diskdrake/interactive.pm:1341 standalone/drakvpn:1017
 #: standalone/drakvpn:1102
 #, c-format
 msgid "Encryption algorithm"
@@ -2991,8 +2996,8 @@ msgstr "必要的 %s 套件遺失"
 #: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
 #: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
 #: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
-#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4308
-#: printer/printerdrake.pm:5465 standalone/drakTermServ:326
+#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4307
+#: printer/printerdrake.pm:5464 standalone/drakTermServ:326
 #: standalone/drakTermServ:1205 standalone/drakTermServ:1266
 #: standalone/drakTermServ:1935 standalone/drakbackup:510
 #: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
@@ -3069,36 +3074,36 @@ msgstr "卸下 %s 的掛載時發生錯誤：%s"
 msgid "Enabling swap partition %s"
 msgstr "正在啟用 swap 分割區 %s"
 
-#: fs/mount_options.pm:111
+#: fs/mount_options.pm:112
 #, c-format
 msgid "Use an encrypted file system"
 msgstr "使用加密的檔案系統"
 
-#: fs/mount_options.pm:113
+#: fs/mount_options.pm:114
 #, c-format
 msgid "Enable group disk quota accounting and optionally enforce limits"
 msgstr ""
 
-#: fs/mount_options.pm:115
+#: fs/mount_options.pm:116
 #, c-format
 msgid ""
 "Do not update inode access times on this file system\n"
 "(e.g, for faster access on the news spool to speed up news servers)."
 msgstr ""
 
-#: fs/mount_options.pm:118
+#: fs/mount_options.pm:119
 #, c-format
 msgid ""
 "Can only be mounted explicitly (i.e.,\n"
 "the -a option will not cause the file system to be mounted)."
 msgstr ""
 
-#: fs/mount_options.pm:121
+#: fs/mount_options.pm:122
 #, c-format
 msgid "Do not interpret character or block special devices on the file system."
 msgstr ""
 
-#: fs/mount_options.pm:123
+#: fs/mount_options.pm:124
 #, c-format
 msgid ""
 "Do not allow execution of any binaries on the mounted\n"
@@ -3106,7 +3111,7 @@ msgid ""
 "containing binaries for architectures other than its own."
 msgstr ""
 
-#: fs/mount_options.pm:127
+#: fs/mount_options.pm:128
 #, c-format
 msgid ""
 "Do not allow set-user-identifier or set-group-identifier\n"
@@ -3116,17 +3121,17 @@ msgstr ""
 "不允許 set-user-identifier 或 set-group-identifier 作用。\n"
 "(這樣似乎是安全的，但當您有安裝 suidperl(1) 時則不然。)"
 
-#: fs/mount_options.pm:131
+#: fs/mount_options.pm:132
 #, c-format
 msgid "Mount the file system read-only."
 msgstr "以唯讀方式掛載檔案系統。"
 
-#: fs/mount_options.pm:133
+#: fs/mount_options.pm:134
 #, c-format
 msgid "All I/O to the file system should be done synchronously."
 msgstr "所有對於此檔案系統的存取 (I/O) 動作必須同步。"
 
-#: fs/mount_options.pm:137
+#: fs/mount_options.pm:138
 #, c-format
 msgid ""
 "Allow an ordinary user to mount the file system. The\n"
@@ -3141,17 +3146,17 @@ msgstr ""
 "這個選項套用了 noexec、nosuid 以及 nodev 的參數\n"
 "(除非被以下參數複寫，例如選項行 user、exec、dev、suid 參數)。"
 
-#: fs/mount_options.pm:143
+#: fs/mount_options.pm:144
 #, c-format
 msgid "Enable user disk quota accounting, and optionally enforce limits"
 msgstr ""
 
-#: fs/mount_options.pm:145
+#: fs/mount_options.pm:146
 #, c-format
 msgid "Give write access to ordinary users"
 msgstr "授予寫入權限給一般使用者"
 
-#: fs/mount_options.pm:147
+#: fs/mount_options.pm:148
 #, c-format
 msgid "Give read-only access to ordinary users"
 msgstr "授予唯讀權限給一般使用者"
@@ -3176,7 +3181,7 @@ msgstr "將 /usr 分別掛載"
 msgid "server"
 msgstr "伺服器"
 
-#: fsedit.pm:217
+#: fsedit.pm:218
 #, c-format
 msgid ""
 "I can not read the partition table of device %s, it's too corrupted for me :"
@@ -3194,22 +3199,22 @@ msgstr ""
 "\n"
 "您同意要清除所有的分割區嗎？\n"
 
-#: fsedit.pm:381
+#: fsedit.pm:382
 #, c-format
 msgid "Mount points must begin with a leading /"
 msgstr "掛載點必需以 / 開頭"
 
-#: fsedit.pm:382
+#: fsedit.pm:383
 #, c-format
 msgid "Mount points should contain only alphanumerical characters"
 msgstr "掛載點應該只有包含英文字母與數字與底線這類字元"
 
-#: fsedit.pm:383
+#: fsedit.pm:384
 #, c-format
 msgid "There is already a partition with mount point %s\n"
 msgstr "已經有分割區分配到掛載點 %s 了\n"
 
-#: fsedit.pm:385
+#: fsedit.pm:386
 #, c-format
 msgid ""
 "You've selected a software RAID partition as root (/).\n"
@@ -3220,14 +3225,14 @@ msgstr ""
 "沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n"
 "請確定會增加一個 /boot 分割區"
 
-#: fsedit.pm:390
+#: fsedit.pm:391
 #, fuzzy, c-format
 msgid ""
 "You can not use the LVM Logical Volume for mount point %s since it spans "
 "physical volumes"
 msgstr "您不能使用 LVM Logical Volume 來作為 %s 的掛載點"
 
-#: fsedit.pm:392
+#: fsedit.pm:393
 #, fuzzy, c-format
 msgid ""
 "You've selected the LVM Logical Volume as root (/).\n"
@@ -3239,12 +3244,12 @@ msgstr ""
 "沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n"
 "請確定會增加一個 /boot 分割區"
 
-#: fsedit.pm:396 fsedit.pm:398
+#: fsedit.pm:397 fsedit.pm:399
 #, c-format
 msgid "This directory should remain within the root filesystem"
 msgstr "這個目錄應該放在根檔案系統 (/) 才對"
 
-#: fsedit.pm:400 fsedit.pm:402
+#: fsedit.pm:401 fsedit.pm:403
 #, c-format
 msgid ""
 "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
@@ -3252,22 +3257,22 @@ msgid ""
 msgstr ""
 "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n"
 
-#: fsedit.pm:404
+#: fsedit.pm:405
 #, c-format
 msgid "You can not use an encrypted file system for mount point %s"
 msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點"
 
-#: fsedit.pm:465
+#: fsedit.pm:466
 #, c-format
 msgid "Not enough free space for auto-allocating"
 msgstr "沒有足夠的空間來進行自動配置"
 
-#: fsedit.pm:467
+#: fsedit.pm:468
 #, c-format
 msgid "Nothing to do"
 msgstr "沒有做任何動作"
 
-#: harddrake/data.pm:62 install_any.pm:1712
+#: harddrake/data.pm:62 install_any.pm:1711
 #, c-format
 msgid "Floppy"
 msgstr "軟碟機"
@@ -3277,12 +3282,12 @@ msgstr "軟碟機"
 msgid "Zip"
 msgstr "Zip"
 
-#: harddrake/data.pm:88 install_any.pm:1713
+#: harddrake/data.pm:88 install_any.pm:1712
 #, c-format
 msgid "Hard Disk"
 msgstr "硬碟"
 
-#: harddrake/data.pm:97 install_any.pm:1714
+#: harddrake/data.pm:97 install_any.pm:1713
 #, c-format
 msgid "CDROM"
 msgstr "光碟機"
@@ -4130,14 +4135,14 @@ msgid ""
 "such a floppy."
 msgstr ""
 
-#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:946
+#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:945
 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
 #: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
 
-#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:946 interactive.pm:161
+#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:945 interactive.pm:161
 #: modules/interactive.pm:71 printer/printerdrake.pm:883
 #: printer/printerdrake.pm:898 standalone/drakbackup:2613
 #: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
@@ -5465,7 +5470,7 @@ msgstr "ISDN 卡"
 msgid "Graphical Interface"
 msgstr "圖形介面"
 
-#: help.pm:855 install_any.pm:1735 install_steps_interactive.pm:1071
+#: help.pm:855 install_any.pm:1734 install_steps_interactive.pm:1071
 #: standalone/drakbackup:2040
 #, c-format
 msgid "Network"
@@ -5550,13 +5555,13 @@ msgstr ""
 msgid "You must also format %s"
 msgstr "您也必須要格式化 %s"
 
-#: install_any.pm:407
+#: install_any.pm:406
 #, c-format
 msgid "Do you have further supplementary media?"
 msgstr "您還有其他的補充媒介嗎?"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:410
+#: install_any.pm:409
 #, c-format
 msgid ""
 "The following media have been found and will be used during install: %s.\n"
@@ -5569,7 +5574,7 @@ msgstr ""
 "\n"
 "您有補充安裝媒介要設定嗎?"
 
-#: install_any.pm:423 printer/printerdrake.pm:3188
+#: install_any.pm:422 printer/printerdrake.pm:3188
 #: printer/printerdrake.pm:3195 standalone/scannerdrake:182
 #: standalone/scannerdrake:190 standalone/scannerdrake:241
 #: standalone/scannerdrake:248
@@ -5577,89 +5582,89 @@ msgstr ""
 msgid "CD-ROM"
 msgstr "CD-ROM"
 
-#: install_any.pm:423
+#: install_any.pm:422
 #, c-format
 msgid "Network (HTTP)"
 msgstr "網路 (HTTP)"
 
-#: install_any.pm:423
+#: install_any.pm:422
 #, c-format
 msgid "Network (FTP)"
 msgstr "網路 (FTP)"
 
-#: install_any.pm:423
+#: install_any.pm:422
 #, c-format
 msgid "Network (NFS)"
 msgstr "網路 (NFS)"
 
-#: install_any.pm:453
+#: install_any.pm:452
 #, c-format
 msgid "Insert the CD 1 again"
 msgstr "請再次插入光碟 1"
 
-#: install_any.pm:479 network/netconnect.pm:862 standalone/drakbackup:114
+#: install_any.pm:478 network/netconnect.pm:862 standalone/drakbackup:114
 #, c-format
 msgid "No device found"
 msgstr "沒有找到任何裝置"
 
-#: install_any.pm:484
+#: install_any.pm:483
 #, c-format
 msgid "Insert the CD"
 msgstr "請插入光碟"
 
-#: install_any.pm:489
+#: install_any.pm:488
 #, c-format
 msgid "Unable to mount CD-ROM"
 msgstr "無法掛載光碟機"
 
-#: install_any.pm:522 install_any.pm:543
+#: install_any.pm:521 install_any.pm:542
 #, c-format
 msgid "URL of the mirror?"
 msgstr "映像站的 URL？"
 
-#: install_any.pm:527
+#: install_any.pm:526
 #, c-format
 msgid "NFS setup"
 msgstr "設定 NFS"
 
-#: install_any.pm:527
+#: install_any.pm:526
 #, c-format
 msgid "Please enter the hostname and directory of your NFS media"
 msgstr "請輸入您的 NFS 媒介的主機和目錄名稱"
 
-#: install_any.pm:528
+#: install_any.pm:527
 #, c-format
 msgid "Hostname of the NFS mount ?"
 msgstr "NFS 掛載點的主機名稱？"
 
-#: install_any.pm:528 standalone/draknfs:288
+#: install_any.pm:527 standalone/draknfs:288
 #, c-format
 msgid "Directory"
 msgstr "目錄"
 
-#: install_any.pm:581
+#: install_any.pm:580
 #, c-format
 msgid ""
 "Can't find a package list file on this mirror. Make sure the location is "
 "correct."
 msgstr "無法在這個映像站上找到套件列表檔。請確定位址是正確的。"
 
-#: install_any.pm:658
+#: install_any.pm:657
 #, c-format
 msgid "Removing packages prior to upgrade..."
 msgstr ""
 
-#: install_any.pm:700
+#: install_any.pm:699
 #, c-format
 msgid "Looking at packages already installed..."
 msgstr "正在查看已經安裝過的套件..."
 
-#: install_any.pm:704
+#: install_any.pm:703
 #, c-format
 msgid "Finding packages to upgrade..."
 msgstr "正在搜尋要升級的套件..."
 
-#: install_any.pm:782
+#: install_any.pm:781
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -5669,13 +5674,13 @@ msgstr ""
 "更換光碟片！\n"
 "請插入標籤為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。"
 
-#: install_any.pm:794
+#: install_any.pm:793
 #, c-format
 msgid "Copying in progress"
 msgstr "複製進行中"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:937
+#: install_any.pm:936
 #, c-format
 msgid ""
 "You have selected the following server(s): %s\n"
@@ -5698,7 +5703,7 @@ msgstr ""
 "您確定真的要安裝這些伺服器嗎？\n"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:960
+#: install_any.pm:959
 #, c-format
 msgid ""
 "The following packages will be removed to allow upgrading your system: %s\n"
@@ -5711,22 +5716,22 @@ msgstr ""
 "\n"
 "您確定要移除這些套件嗎？\n"
 
-#: install_any.pm:1396 partition_table.pm:597
+#: install_any.pm:1395 partition_table.pm:597
 #, c-format
 msgid "Error reading file %s"
 msgstr "讀取檔案 %s 時發生錯誤"
 
-#: install_any.pm:1630
+#: install_any.pm:1629
 #, c-format
 msgid "The following disk(s) were renamed:"
 msgstr "下列磁碟已經改名："
 
-#: install_any.pm:1632
+#: install_any.pm:1631
 #, c-format
 msgid "%s (previously named as %s)"
 msgstr "%s (原本為 %s)"
 
-#: install_any.pm:1672
+#: install_any.pm:1671
 #, c-format
 msgid ""
 "An error occurred - no valid devices were found on which to create new "
@@ -5735,52 +5740,52 @@ msgstr ""
 "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體"
 "以找出問題的原因所在"
 
-#: install_any.pm:1716
+#: install_any.pm:1715
 #, c-format
 msgid "HTTP"
 msgstr "HTTP"
 
-#: install_any.pm:1716
+#: install_any.pm:1715
 #, c-format
 msgid "FTP"
 msgstr "FTP"
 
-#: install_any.pm:1716
+#: install_any.pm:1715
 #, c-format
 msgid "NFS"
 msgstr "NFS"
 
-#: install_any.pm:1739
+#: install_any.pm:1738
 #, c-format
 msgid "Please choose a media"
 msgstr "請選擇一個媒介"
 
-#: install_any.pm:1755
+#: install_any.pm:1754
 #, c-format
 msgid "File already exists. Overwrite it?"
 msgstr "檔案已經存在了。要覆蓋它嗎？"
 
-#: install_any.pm:1759
+#: install_any.pm:1758
 #, c-format
 msgid "Permission denied"
 msgstr "權限不足"
 
-#: install_any.pm:1808
+#: install_any.pm:1807
 #, c-format
 msgid "Bad NFS name"
 msgstr "錯誤的 NFS 名稱"
 
-#: install_any.pm:1829
+#: install_any.pm:1828
 #, c-format
 msgid "Bad media %s"
 msgstr "損壞的媒介 %s"
 
-#: install_any.pm:1879
+#: install_any.pm:1878
 #, c-format
 msgid "Can not make screenshots before partitioning"
 msgstr "在尚未進行分割前無法提供畫面捕捉功能"
 
-#: install_any.pm:1886
+#: install_any.pm:1885
 #, c-format
 msgid "Screenshots will be available after install in %s"
 msgstr "在安裝於 %s 後就能夠提供畫面捕捉功能"
@@ -9625,42 +9630,42 @@ msgstr ""
 msgid "Use Interactive Firewall"
 msgstr ""
 
-#: network/ifw.pm:136
+#: network/ifw.pm:138
 #, c-format
 msgid "Port scanning"
 msgstr "通訊埠掃描"
 
-#: network/ifw.pm:137
+#: network/ifw.pm:139
 #, c-format
 msgid "Service attack"
 msgstr "攻擊服務"
 
-#: network/ifw.pm:138
+#: network/ifw.pm:140
 #, c-format
 msgid "Password cracking"
 msgstr "密碼破解"
 
-#: network/ifw.pm:139
+#: network/ifw.pm:141
 #, c-format
 msgid "\"%s\" attack"
 msgstr "\"%s\" 攻擊"
 
-#: network/ifw.pm:141
+#: network/ifw.pm:143
 #, c-format
 msgid "A port scanning attack has been attempted by %s."
 msgstr "%s 試圖發動通訊埠掃描攻擊。"
 
-#: network/ifw.pm:142
+#: network/ifw.pm:144
 #, c-format
 msgid "The %s service has been attacked by %s."
 msgstr "%2$s 試圖對 %1$s 服務發動攻擊。"
 
-#: network/ifw.pm:143
+#: network/ifw.pm:145
 #, c-format
 msgid "A password cracking attack has been attempted by %s."
 msgstr "%s 試圖發動密碼破解攻擊。"
 
-#: network/ifw.pm:144
+#: network/ifw.pm:146
 #, c-format
 msgid "A \"%s\" attack has been attempted by %s"
 msgstr "%2$s 試圖發動 \"%1$s\" 攻擊"
@@ -10903,34 +10908,34 @@ msgstr ""
 "發生了一個沒有預料到的錯誤：\n"
 "%s"
 
-#: network/network.pm:408
+#: network/network.pm:410
 #, c-format
 msgid "Proxies configuration"
 msgstr "代理伺服器設定"
 
-#: network/network.pm:409
+#: network/network.pm:411
 #, c-format
 msgid ""
 "Here you can set up your proxies configuration (eg: http://"
-"my_caching_server:8080"
+"my_caching_server:8080)"
 msgstr ""
 
-#: network/network.pm:410
+#: network/network.pm:412
 #, c-format
 msgid "HTTP proxy"
 msgstr "HTTP 代理伺服器"
 
-#: network/network.pm:411
+#: network/network.pm:413
 #, c-format
 msgid "FTP proxy"
 msgstr "FTP 代理伺服器"
 
-#: network/network.pm:414
+#: network/network.pm:416
 #, c-format
 msgid "Proxy should be http://..."
 msgstr "代理伺服器的設定格式必須為 http://..."
 
-#: network/network.pm:415
+#: network/network.pm:417
 #, c-format
 msgid "URL should begin with 'ftp:' or 'http:'"
 msgstr "URL 應該是以 'ftp:' 或 'http:' 開頭"
@@ -11169,9 +11174,9 @@ msgstr "於其他機器上被設定"
 msgid "On CUPS server \"%s\""
 msgstr "位於 CUPS 伺服器 \"%s\""
 
-#: printer/cups.pm:119 printer/printerdrake.pm:4887
-#: printer/printerdrake.pm:4897 printer/printerdrake.pm:5056
-#: printer/printerdrake.pm:5067 printer/printerdrake.pm:5281
+#: printer/cups.pm:119 printer/printerdrake.pm:4886
+#: printer/printerdrake.pm:4896 printer/printerdrake.pm:5055
+#: printer/printerdrake.pm:5066 printer/printerdrake.pm:5280
 #, c-format
 msgid " (Default)"
 msgstr " (預設開機)"
@@ -11222,8 +11227,8 @@ msgid "Remote CUPS"
 msgstr "遠端 CUPS"
 
 #: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
-#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:690
-#: printer/main.pm:1808 printer/printerdrake.pm:960
+#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:692
+#: printer/main.pm:1810 printer/printerdrake.pm:960
 #: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447
 #: printer/printerdrake.pm:3981
 #, c-format
@@ -11472,34 +11477,34 @@ msgstr "使用指令 %s"
 msgid "URI: %s"
 msgstr "URI：%s"
 
-#: printer/main.pm:687 printer/printerdrake.pm:1047
+#: printer/main.pm:689 printer/printerdrake.pm:1047
 #: printer/printerdrake.pm:3119
 #, c-format
 msgid "Raw printer (No driver)"
 msgstr "Raw 印表機 (沒有驅動程式)"
 
-#: printer/main.pm:1307 printer/printerdrake.pm:211
+#: printer/main.pm:1309 printer/printerdrake.pm:211
 #: printer/printerdrake.pm:223
 #, c-format
 msgid "Local network(s)"
 msgstr "本地端網路"
 
-#: printer/main.pm:1309 printer/printerdrake.pm:227
+#: printer/main.pm:1311 printer/printerdrake.pm:227
 #, c-format
 msgid "Interface \"%s\""
 msgstr "介面 \"%s\""
 
-#: printer/main.pm:1311
+#: printer/main.pm:1313
 #, c-format
 msgid "Network %s"
 msgstr "網路 %s"
 
-#: printer/main.pm:1313
+#: printer/main.pm:1315
 #, c-format
 msgid "Host %s"
 msgstr "主機 %s"
 
-#: printer/main.pm:1342
+#: printer/main.pm:1344
 #, c-format
 msgid "%s (Port %s)"
 msgstr "%s (連接埠 %s)"
@@ -11624,7 +11629,7 @@ msgid ""
 msgstr ""
 
 #: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4520
+#: printer/printerdrake.pm:4519
 #, c-format
 msgid "Remote CUPS server and no local CUPS daemon"
 msgstr ""
@@ -11783,8 +11788,8 @@ msgstr "通訊埠"
 msgid "On, Name or IP of remote server:"
 msgstr "開，遠端伺服器的名稱或 IP 位址："
 
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4529
-#: printer/printerdrake.pm:4595
+#: printer/printerdrake.pm:514 printer/printerdrake.pm:4528
+#: printer/printerdrake.pm:4594
 #, c-format
 msgid "CUPS server name or IP address missing."
 msgstr "CUPS 伺服器的名稱或 IP 位址遺失。"
@@ -11804,19 +11809,19 @@ msgstr "CUPS 伺服器的名稱或 IP 位址遺失。"
 #: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068
 #: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198
 #: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229
-#: printer/printerdrake.pm:4320 printer/printerdrake.pm:4415
-#: printer/printerdrake.pm:4421 printer/printerdrake.pm:4449
-#: printer/printerdrake.pm:4556 printer/printerdrake.pm:4665
-#: printer/printerdrake.pm:4685 printer/printerdrake.pm:4694
-#: printer/printerdrake.pm:4709 printer/printerdrake.pm:4910
-#: printer/printerdrake.pm:5385 printer/printerdrake.pm:5468
+#: printer/printerdrake.pm:4319 printer/printerdrake.pm:4414
+#: printer/printerdrake.pm:4420 printer/printerdrake.pm:4448
+#: printer/printerdrake.pm:4555 printer/printerdrake.pm:4664
+#: printer/printerdrake.pm:4684 printer/printerdrake.pm:4693
+#: printer/printerdrake.pm:4708 printer/printerdrake.pm:4909
+#: printer/printerdrake.pm:5384 printer/printerdrake.pm:5467
 #: standalone/printerdrake:75 standalone/printerdrake:590
 #, c-format
 msgid "Printerdrake"
 msgstr "PrinterDrake"
 
 #: printer/printerdrake.pm:567 printer/printerdrake.pm:4127
-#: printer/printerdrake.pm:4666
+#: printer/printerdrake.pm:4665
 #, c-format
 msgid "Reading printer data..."
 msgstr "正在讀取印表機資料..."
@@ -11946,7 +11951,7 @@ msgstr ""
 "位於遠端 CUPS 伺服器的印表機上並不需要在這裡設定；\n"
 "這些印表機將自動偵測到。"
 
-#: printer/printerdrake.pm:751 printer/printerdrake.pm:4912
+#: printer/printerdrake.pm:751 printer/printerdrake.pm:4911
 #, c-format
 msgid ""
 "\n"
@@ -12196,7 +12201,7 @@ msgid ""
 "similar one."
 msgstr "如果您的印表機並未列出，請選取一個相容 (見印表機說明書) 或者是相似的。"
 
-#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4686
+#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4685
 #, c-format
 msgid "Configuring printer \"%s\"..."
 msgstr "正在設定印表機 \"%s\" ..."
@@ -12217,7 +12222,7 @@ msgid ""
 "main menu. "
 msgstr "您可以在 Printerdrake 主選單中的 \"%s\" -> \"%s\" 再次啟動它。"
 
-#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4962
+#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4961
 #, c-format
 msgid "Configure Auto Administration"
 msgstr "設定自動管理"
@@ -12233,7 +12238,7 @@ msgstr ""
 #: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273
 #: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401
 #: printer/printerdrake.pm:2459 printer/printerdrake.pm:2543
-#: printer/printerdrake.pm:4929 printer/printerdrake.pm:5116
+#: printer/printerdrake.pm:4928 printer/printerdrake.pm:5115
 #, c-format
 msgid "Add a new printer"
 msgstr "新增一個印表機"
@@ -13026,8 +13031,8 @@ msgstr "編輯"
 msgid "and choosing \"%s\"."
 msgstr ""
 
-#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5312
-#: printer/printerdrake.pm:5372
+#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5311
+#: printer/printerdrake.pm:5371
 #, c-format
 msgid "Printer connection type"
 msgstr "印表機連線方式"
@@ -13948,18 +13953,18 @@ msgstr "正在更新印表機資料 ..."
 msgid "Starting network..."
 msgstr "啟動網路中 ..."
 
-#: printer/printerdrake.pm:4274 printer/printerdrake.pm:4278
-#: printer/printerdrake.pm:4280
+#: printer/printerdrake.pm:4273 printer/printerdrake.pm:4277
+#: printer/printerdrake.pm:4279
 #, c-format
 msgid "Configure the network now"
 msgstr "立即設定網路"
 
-#: printer/printerdrake.pm:4275
+#: printer/printerdrake.pm:4274
 #, c-format
 msgid "Network functionality not configured"
 msgstr "目前網路功能尚未設定"
 
-#: printer/printerdrake.pm:4276
+#: printer/printerdrake.pm:4275
 #, c-format
 msgid ""
 "You are going to configure a remote printer. This needs working network "
@@ -13972,12 +13977,12 @@ msgstr ""
 "目繼續進行下面的步驟的話, 關於設定使用遠端印表機功能的項目將無法設定。您打算"
 "要怎麼作呢？"
 
-#: printer/printerdrake.pm:4279
+#: printer/printerdrake.pm:4278
 #, c-format
 msgid "Go on without configuring the network"
 msgstr "略過網路設定項目繼續進行下面的步驟"
 
-#: printer/printerdrake.pm:4310
+#: printer/printerdrake.pm:4309
 #, c-format
 msgid ""
 "The network configuration done during the installation cannot be started "
@@ -13990,7 +13995,7 @@ msgstr ""
 "可用，並使用 %s 控制中心選擇『網路』『連線』項目修正設定。後續印表機的\n"
 "設定, 也可以用 %s 控制中心，在『硬體』內的『印表機』項目來進行設定"
 
-#: printer/printerdrake.pm:4311
+#: printer/printerdrake.pm:4310
 #, c-format
 msgid ""
 "The network access was not running and could not be started. Please check "
@@ -14001,27 +14006,27 @@ msgstr ""
 "請檢查一下您的設定, 甚至包含您的硬體是否設定正確無誤。\n"
 "當檢查完畢後, 再重新設定遠端列印的相關項目。"
 
-#: printer/printerdrake.pm:4321
+#: printer/printerdrake.pm:4320
 #, c-format
 msgid "Restarting printing system..."
 msgstr "正在重新啟動列印系統服務 ..."
 
-#: printer/printerdrake.pm:4352
+#: printer/printerdrake.pm:4351
 #, c-format
 msgid "high"
 msgstr "高"
 
-#: printer/printerdrake.pm:4352
+#: printer/printerdrake.pm:4351
 #, c-format
 msgid "paranoid"
 msgstr "瘋狂狀態"
 
-#: printer/printerdrake.pm:4354
+#: printer/printerdrake.pm:4353
 #, c-format
 msgid "Installing a printing system in the %s security level"
 msgstr "在 %s 安全等級環境下正在安裝列印服務系統項目"
 
-#: printer/printerdrake.pm:4355
+#: printer/printerdrake.pm:4354
 #, c-format
 msgid ""
 "You are about to install the printing system %s on a system running in the %"
@@ -14046,12 +14051,12 @@ msgstr ""
 "\n"
 "您確定要開始設定這台機器上的列印項目設定嗎？"
 
-#: printer/printerdrake.pm:4391
+#: printer/printerdrake.pm:4390
 #, c-format
 msgid "Starting the printing system at boot time"
 msgstr "於開機時啟動列印服務系統"
 
-#: printer/printerdrake.pm:4392
+#: printer/printerdrake.pm:4391
 #, c-format
 msgid ""
 "The printing system (%s) will not be started automatically when the machine "
@@ -14072,32 +14077,32 @@ msgstr ""
 "您希望這邊能夠設定在開機時能夠預設啟動列印\n"
 "服務的項目嗎？"
 
-#: printer/printerdrake.pm:4415
+#: printer/printerdrake.pm:4414
 #, c-format
 msgid "Checking installed software..."
 msgstr "正在檢查已經安裝的軟體"
 
-#: printer/printerdrake.pm:4421
+#: printer/printerdrake.pm:4420
 #, c-format
 msgid "Removing %s..."
 msgstr "正在移除 %s"
 
-#: printer/printerdrake.pm:4425
+#: printer/printerdrake.pm:4424
 #, c-format
 msgid "Could not remove the %s printing system!"
 msgstr "無法移除 %s 列印系統！"
 
-#: printer/printerdrake.pm:4449
+#: printer/printerdrake.pm:4448
 #, c-format
 msgid "Installing %s..."
 msgstr "正在安裝套件 %s..."
 
-#: printer/printerdrake.pm:4453
+#: printer/printerdrake.pm:4452
 #, c-format
 msgid "Could not install the %s printing system!"
 msgstr "無法安裝 %s 列印系統！"
 
-#: printer/printerdrake.pm:4521
+#: printer/printerdrake.pm:4520
 #, c-format
 msgid ""
 "In this mode there is no local printing system, all printing requests go "
@@ -14106,46 +14111,46 @@ msgid ""
 "be printed at all from this machine."
 msgstr ""
 
-#: printer/printerdrake.pm:4523
+#: printer/printerdrake.pm:4522
 #, c-format
 msgid ""
 "Enter the host name or IP of your CUPS server and click OK if you want to "
 "use this mode, click \"Quit\" otherwise."
 msgstr ""
 
-#: printer/printerdrake.pm:4537
+#: printer/printerdrake.pm:4536
 #, c-format
 msgid "Name or IP of remote server:"
 msgstr "遠端伺服器的名稱或 IP:"
 
-#: printer/printerdrake.pm:4557
+#: printer/printerdrake.pm:4556
 #, c-format
 msgid "Setting Default Printer..."
 msgstr "設定預設印表機..."
 
-#: printer/printerdrake.pm:4577
+#: printer/printerdrake.pm:4576
 #, c-format
 msgid "Local CUPS printing system or remote CUPS server?"
 msgstr "本機的 CUPS 列印系統或遠端的 CUPS 伺服器？"
 
-#: printer/printerdrake.pm:4578
+#: printer/printerdrake.pm:4577
 #, c-format
 msgid "The CUPS printing system can be used in two ways: "
 msgstr "CUPS 列印系統可以下列兩種方式使用："
 
-#: printer/printerdrake.pm:4580
+#: printer/printerdrake.pm:4579
 #, c-format
 msgid "1. The CUPS printing system can run locally. "
 msgstr "1. CUPS 列印系統可以在本地端執行。"
 
-#: printer/printerdrake.pm:4581
+#: printer/printerdrake.pm:4580
 #, c-format
 msgid ""
 "Then locally connected printers can be used and remote printers on other "
 "CUPS servers in the same network are automatically discovered. "
 msgstr ""
 
-#: printer/printerdrake.pm:4582
+#: printer/printerdrake.pm:4581
 #, c-format
 msgid ""
 "Disadvantage of this approach is, that more resources on the local machine "
@@ -14154,12 +14159,12 @@ msgid ""
 "(port 631) is opened. "
 msgstr ""
 
-#: printer/printerdrake.pm:4584
+#: printer/printerdrake.pm:4583
 #, c-format
 msgid "2. All printing requests are immediately sent to a remote CUPS server. "
 msgstr ""
 
-#: printer/printerdrake.pm:4585
+#: printer/printerdrake.pm:4584
 #, c-format
 msgid ""
 "Here local resource occupation is reduced to a minimum. No CUPS daemon is "
@@ -14167,55 +14172,55 @@ msgid ""
 "print queues is installed, so less memory and disk space is used. "
 msgstr ""
 
-#: printer/printerdrake.pm:4586
+#: printer/printerdrake.pm:4585
 #, c-format
 msgid ""
 "Disadvantage is that it is not possible to define local printers then and if "
 "the specified server is down it cannot be printed at all from this machine. "
 msgstr ""
 
-#: printer/printerdrake.pm:4588
+#: printer/printerdrake.pm:4587
 #, c-format
 msgid "How should CUPS be set up on your machine?"
 msgstr "您的 CUPS 系統應該如何設定？"
 
-#: printer/printerdrake.pm:4592 printer/printerdrake.pm:4607
-#: printer/printerdrake.pm:4611 printer/printerdrake.pm:4617
+#: printer/printerdrake.pm:4591 printer/printerdrake.pm:4606
+#: printer/printerdrake.pm:4610 printer/printerdrake.pm:4616
 #, c-format
 msgid "Remote server, specify Name or IP here:"
 msgstr ""
 
-#: printer/printerdrake.pm:4606
+#: printer/printerdrake.pm:4605
 #, c-format
 msgid "Local CUPS printing system"
 msgstr "本機的 CUPS 列印系統"
 
-#: printer/printerdrake.pm:4645
+#: printer/printerdrake.pm:4644
 #, c-format
 msgid "Select Printer Spooler"
 msgstr "選擇印表列印系統"
 
-#: printer/printerdrake.pm:4646
+#: printer/printerdrake.pm:4645
 #, c-format
 msgid "Which printing system (spooler) do you want to use?"
 msgstr "您打算用那一套列印系統？"
 
-#: printer/printerdrake.pm:4695
+#: printer/printerdrake.pm:4694
 #, c-format
 msgid "Failed to configure printer \"%s\"!"
 msgstr "無法設定「%s」印表機！"
 
-#: printer/printerdrake.pm:4710
+#: printer/printerdrake.pm:4709
 #, c-format
 msgid "Installing Foomatic..."
 msgstr "正在安裝 Foomatic 套件..."
 
-#: printer/printerdrake.pm:4716
+#: printer/printerdrake.pm:4715
 #, c-format
 msgid "Could not install %s packages, %s cannot be started!"
 msgstr "無法安裝套件 %s，%s 啟動失敗！"
 
-#: printer/printerdrake.pm:4911
+#: printer/printerdrake.pm:4910
 #, c-format
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
@@ -14225,48 +14230,48 @@ msgstr ""
 "下列的印表機都已經設定好了, 您可以點選其中一個印表機來修改其設定；設定為預設"
 "印表機；或查看其資訊。"
 
-#: printer/printerdrake.pm:4941
+#: printer/printerdrake.pm:4940
 #, c-format
 msgid "Display all available remote CUPS printers"
 msgstr "顯示所有可用的遠端 CUPS 印表機"
 
-#: printer/printerdrake.pm:4942
+#: printer/printerdrake.pm:4941
 #, c-format
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr "更新印表機清單 (重新尋找遠端可用的所有 CUPS 印表機)"
 
-#: printer/printerdrake.pm:4953
+#: printer/printerdrake.pm:4952
 #, c-format
 msgid "CUPS configuration"
 msgstr "CUPS 設定組態"
 
-#: printer/printerdrake.pm:4974
+#: printer/printerdrake.pm:4973
 #, c-format
 msgid "Change the printing system"
 msgstr "變更列印系統"
 
-#: printer/printerdrake.pm:4983
+#: printer/printerdrake.pm:4982
 #, c-format
 msgid "Normal Mode"
 msgstr "一般模式"
 
-#: printer/printerdrake.pm:4984
+#: printer/printerdrake.pm:4983
 #, c-format
 msgid "Expert Mode"
 msgstr "專家模式"
 
-#: printer/printerdrake.pm:5262 printer/printerdrake.pm:5318
-#: printer/printerdrake.pm:5404 printer/printerdrake.pm:5413
+#: printer/printerdrake.pm:5261 printer/printerdrake.pm:5317
+#: printer/printerdrake.pm:5403 printer/printerdrake.pm:5412
 #, c-format
 msgid "Printer options"
 msgstr "印表機選項"
 
-#: printer/printerdrake.pm:5298
+#: printer/printerdrake.pm:5297
 #, c-format
 msgid "Modify printer configuration"
 msgstr "修改印表機設定"
 
-#: printer/printerdrake.pm:5300
+#: printer/printerdrake.pm:5299
 #, c-format
 msgid ""
 "Printer %s%s\n"
@@ -14275,99 +14280,99 @@ msgstr ""
 "印表機 %s%s\n"
 "您要修改這個印表機的那個項目？"
 
-#: printer/printerdrake.pm:5305
+#: printer/printerdrake.pm:5304
 #, c-format
 msgid "This printer is disabled"
 msgstr "這個印表機已經停用了"
 
-#: printer/printerdrake.pm:5307
+#: printer/printerdrake.pm:5306
 #, c-format
 msgid "Do it!"
 msgstr "做吧 !"
 
-#: printer/printerdrake.pm:5313 printer/printerdrake.pm:5378
+#: printer/printerdrake.pm:5312 printer/printerdrake.pm:5377
 #, c-format
 msgid "Printer name, description, location"
 msgstr "印表機名稱, 描述, 位置"
 
-#: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397
+#: printer/printerdrake.pm:5314 printer/printerdrake.pm:5396
 #, c-format
 msgid "Printer manufacturer, model, driver"
 msgstr "印表機廠商,型號,驅動程式"
 
-#: printer/printerdrake.pm:5316 printer/printerdrake.pm:5398
+#: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397
 #, c-format
 msgid "Printer manufacturer, model"
 msgstr "印表機廠商,型號"
 
-#: printer/printerdrake.pm:5320 printer/printerdrake.pm:5408
+#: printer/printerdrake.pm:5319 printer/printerdrake.pm:5407
 #, c-format
 msgid "Set this printer as the default"
 msgstr "使用這台印表機為預設印表機"
 
-#: printer/printerdrake.pm:5325 printer/printerdrake.pm:5414
-#: printer/printerdrake.pm:5416 printer/printerdrake.pm:5425
+#: printer/printerdrake.pm:5324 printer/printerdrake.pm:5413
+#: printer/printerdrake.pm:5415 printer/printerdrake.pm:5424
 #, c-format
 msgid "Enable Printer"
 msgstr "啟用印表機"
 
-#: printer/printerdrake.pm:5328 printer/printerdrake.pm:5419
-#: printer/printerdrake.pm:5420 printer/printerdrake.pm:5422
+#: printer/printerdrake.pm:5327 printer/printerdrake.pm:5418
+#: printer/printerdrake.pm:5419 printer/printerdrake.pm:5421
 #, c-format
 msgid "Disable Printer"
 msgstr "停用印表機"
 
-#: printer/printerdrake.pm:5332 printer/printerdrake.pm:5426
+#: printer/printerdrake.pm:5331 printer/printerdrake.pm:5425
 #, fuzzy, c-format
 msgid "Printer communication error handling"
 msgstr "印表機連線方式"
 
-#: printer/printerdrake.pm:5333 printer/printerdrake.pm:5430
+#: printer/printerdrake.pm:5332 printer/printerdrake.pm:5429
 #, c-format
 msgid "Print test pages"
 msgstr "列印測試頁"
 
-#: printer/printerdrake.pm:5334 printer/printerdrake.pm:5432
+#: printer/printerdrake.pm:5333 printer/printerdrake.pm:5431
 #, c-format
 msgid "Learn how to use this printer"
 msgstr "瞭解如何使用這台印表機"
 
-#: printer/printerdrake.pm:5335 printer/printerdrake.pm:5434
+#: printer/printerdrake.pm:5334 printer/printerdrake.pm:5433
 #, c-format
 msgid "Remove printer"
 msgstr "移除印表機"
 
-#: printer/printerdrake.pm:5386
+#: printer/printerdrake.pm:5385
 #, c-format
 msgid "Removing old printer \"%s\"..."
 msgstr "正在刪除舊的印表機 \"%s\" ..."
 
-#: printer/printerdrake.pm:5417
+#: printer/printerdrake.pm:5416
 #, c-format
 msgid "Printer \"%s\" is now enabled."
 msgstr "\"%s\" 印表機現在啟用了。"
 
-#: printer/printerdrake.pm:5423
+#: printer/printerdrake.pm:5422
 #, c-format
 msgid "Printer \"%s\" is now disabled."
 msgstr "\"%s\" 印表機現在停用了。"
 
-#: printer/printerdrake.pm:5465
+#: printer/printerdrake.pm:5464
 #, c-format
 msgid "Do you really want to remove the printer \"%s\"?"
 msgstr "您確定要刪除印表機 \"%s\" 嗎？"
 
-#: printer/printerdrake.pm:5469
+#: printer/printerdrake.pm:5468
 #, c-format
 msgid "Removing printer \"%s\"..."
 msgstr "正在移除印表機 \"%s\"..."
 
-#: printer/printerdrake.pm:5493
+#: printer/printerdrake.pm:5492
 #, c-format
 msgid "Default printer"
 msgstr "預設印表機"
 
-#: printer/printerdrake.pm:5494
+#: printer/printerdrake.pm:5493
 #, c-format
 msgid "The printer \"%s\" is set as the default printer now."
 msgstr "這台印表機 \"%s\" 將會被設定成為預設印表機。"