updated pot file

1 files changed, 375 insertions, 278 deletions

diff --git a/perl-install/share/po/sr@Latn.po b/perl-install/share/po/sr@Latn.po
index 85f8b247a..41122cff6 100644
--- a/perl-install/share/po/sr@Latn.po
+++ b/perl-install/share/po/sr@Latn.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-09-09 17:07+0200\n"
+"POT-Creation-Date: 2003-09-16 13:45+0200\n"
 "PO-Revision-Date: 2003-02-28 18:21+0100\n"
 "Last-Translator: Toma Jankovic_<tomaja@net.yu>\n"
 "Language-Team: Serbian <i18n@mandrake.co.yu>\n"
@@ -189,7 +189,7 @@ msgstr ""
 "ukoliko je podešeno, pošaljite izveštaj na ovu email adresu uli je pošaljite "
 "root-u."
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Parameters"
 msgstr "Parametri"
@@ -508,6 +508,11 @@ msgstr "Bus"
 msgid "Iraq"
 msgstr "Irak"
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "connecting to %s ..."
+msgstr "konektujem se na Bugzilla čarobnjak ..."
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Potential LAN address conflict found in current config of %s!\n"
@@ -554,6 +559,21 @@ msgstr "Traži instalirane fontove"
 msgid "Default desktop"
 msgstr "Podrazumevano"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid ""
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window on %s\n"
+" where you'll find a form to fill in.  The information displayed above will "
+"be \n"
+"transferred to that server."
+msgstr ""
+"Da bi prijavili bag, kliknite na taster prijava.\n"
+"Ovo će otvoriti prozor web pretraživača sa adresom %s\n"
+" gde će te pronaći formular koji treba da popunite.Informacija koja je gore "
+"prokazana će biti \n"
+"prebačena na taj server."
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Venezuela"
@@ -1142,6 +1162,36 @@ msgstr ""
 "Protokol za Ostatak sveta \n"
 " bez D-kanala (zakupljene linije)"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - /etc/xinetd.d/tftp:\n"
+"        \tdrakTermServ will configure this file to work in conjunction with "
+"the images created\n"
+"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to \n"
+"        \teach diskless client.\n"
+"\n"
+"        \tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \tservice tftp\n"
+"\t\t\t{\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t}\n"
+"        \t\t\n"
+"        \tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \tputs its images."
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Option %s must be a number!"
@@ -1825,16 +1875,16 @@ msgstr ""
 msgid "Use the %c and %c keys for selecting which entry is highlighted."
 msgstr "Koristi  %c i %c slova da bi oznacili izbor"
 
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
 #: ../../mouse.pm:1
 #, c-format
 msgid "Generic 2 Button Mouse"
 msgstr "Generički 2 tastera miš"
 
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Enable \"%s\" to execute the file"
+msgstr ""
+
 #: ../../lvm.pm:1
 #, c-format
 msgid "Remove the logical volumes first\n"
@@ -3101,6 +3151,23 @@ msgstr "Ovo je obavezni paket,i ne može biti deselektovan"
 
 #: ../../standalone/drakTermServ:1
 #, c-format
+msgid ""
+"        - Create etherboot floppies/CDs:\n"
+"        \tThe diskless client machines need either ROM images on the NIC, or "
+"a boot floppy\n"
+"        \tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these\n"
+"        \timages, based on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
 msgid "Etherboot ISO image is %s"
 msgstr "Etherboot ISO image je %s"
 
@@ -3509,33 +3576,6 @@ msgstr "Sakrij fajlove"
 msgid "Auto-detect printers connected to this machine"
 msgstr "Auto-detekcija štampača povezanih sa ovom mašinom"
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-"XawTV nije instaliran!\n"
-"\n"
-"\n"
-"Ukoliko imate TV karticu ali je DrakX nije detektovao (bez bttv ili\n"
-"saa7134 modula u \"/etc/modules\") niti je instalirao xawtv, molim vas da "
-"pošaljete\n"
-"rezultate od \"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\"\n"
-"sa subjektom \"undetected TV card\".\n"
-"\n"
-"\n"
-"Nožete ga instalirati ukucavanjem \"urpmi xawtv\" kao root, u konzoli."
-
 #: ../../any.pm:1
 #, c-format
 msgid "Sorry, no floppy drive available"
@@ -4116,6 +4156,20 @@ msgstr "/etc/hosts.allow i /etc/hosts.deny je već podešen - nije izmenjen"
 msgid "Restore From Tape"
 msgstr "Obnovi sa trake"
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid ""
+"To submit a bug report, click the report button, which will open your "
+"default browser\n"
+"to Anthill where you will be able to upload the above information as a bug "
+"report."
+msgstr ""
+"Da bi prijavili bag, kliknite na taster prijava.\n"
+"Ovo će otvoriti prozor web pretraživača sa adresom %s\n"
+" gde će te pronaći formular koji treba da popunite.Informacija koja je gore "
+"prokazana će biti \n"
+"prebačena na taj server."
+
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "Choose the profile to configure"
@@ -4272,7 +4326,7 @@ msgstr ""
 msgid "Need hostname, username and password!"
 msgstr "Potrebno je ime hosta, korisničko ime i lozinka!"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
 msgid "Insert floppy"
 msgstr "Ubacite disketu u uređaj %s"
@@ -4414,10 +4468,17 @@ msgstr "Mrežni interfejs je već podeššen"
 msgid "Couldn't access the floppy!"
 msgstr "Ne mogu da pristupim disketi!"
 
-#: ../../standalone/drakbug:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "konektujem se na Bugzilla čarobnjak ..."
+msgid ""
+"Warning: Free Software may not necessarily be patent free, and some Free\n"
+"Software included may be covered by patents in your country. For example, "
+"the\n"
+"MP3 decoders included may require a licence for further usage (see\n"
+"http://www.mp3licensing.com for more details). If you are unsure if a "
+"patent\n"
+"may be applicable to you, check your local laws."
+msgstr ""
 
 #: ../../network/drakfirewall.pm:1
 #, c-format
@@ -4601,6 +4662,11 @@ msgstr "Prihvati"
 msgid "Description"
 msgstr "Opis"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Please enter summary text."
+msgstr ""
+
 #: ../../fsedit.pm:1
 #, c-format
 msgid "Error opening %s for writing: %s"
@@ -5565,7 +5631,7 @@ msgstr ""
 msgid "Right Control key"
 msgstr "Desni Alt taster"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
 msgid ""
 "Insert a FAT formatted floppy in drive %s with %s in root directory and "
@@ -6699,6 +6765,22 @@ msgstr ""
 msgid "busmouse"
 msgstr "bus miš"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
+"be created.\n"
+"        \tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical \n"
+"        \tinterface to help manage/customize these images. To create the "
+"file \n"
+"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
+msgstr ""
+
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Account Login (user name)"
@@ -7083,24 +7165,6 @@ msgstr ""
 msgid "Floppy"
 msgstr "Flopi"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Ghostscript referencing"
@@ -7705,6 +7769,11 @@ msgstr "Deljenje internet konekcije"
 msgid "Choose file"
 msgstr "Izaberi datoteku"
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Summary: "
+msgstr "Sažetak"
+
 #: ../../network/shorewall.pm:1
 #, c-format
 msgid ""
@@ -7781,6 +7850,17 @@ msgstr "Francuske Južne Teritorije"
 msgid "the vendor name of the processor"
 msgstr "imee prizvođača procesora"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain %s:\n"
+"        \tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
+"        \thelps in this respect by adding or removing system users from this "
+"file."
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "All data on this partition should be backed-up"
@@ -8104,6 +8184,11 @@ msgstr "Obnovi korisnike"
 msgid "Encryption key for %s"
 msgstr "Ključ za enkripciju"
 
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you want to recover your system?"
+msgstr "Da li želite da koristite aboot ?"
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -8542,6 +8627,11 @@ msgstr "Konfigurisanje X-a"
 msgid ", "
 msgstr ", "
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit lspci"
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Remove selected host/network"
@@ -8785,6 +8875,11 @@ msgstr ""
 "\n"
 "Sada podeavam vašu lokalnu mrežu sa ovim adapterom."
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit cpuinfo"
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1
 #, c-format
 msgid "Minimal install"
@@ -8795,6 +8890,11 @@ msgstr "Minimalno instaliraj"
 msgid "Ethiopia"
 msgstr "Etiopija"
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "YES"
+msgstr ""
+
 #: ../../security/l10n.pm:1
 #, c-format
 msgid "Enable \"crontab\" and \"at\" for users"
@@ -9143,15 +9243,6 @@ msgstr "Tip instalacije"
 msgid "Printer \"%s\" on SMB/Windows server \"%s\""
 msgstr "Štampač \"%s\" na SMB/Windows serveru \"%s\""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Demonn (%s) uključuje :\n"
-
 #: ../../modules/parameters.pm:1
 #, c-format
 msgid "%d comma separated numbers"
@@ -9476,6 +9567,11 @@ msgstr "Monitor - horizontalna frekvencija: %s\n"
 msgid "Path"
 msgstr "Putanja"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "NOT FOUND"
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -10078,18 +10174,6 @@ msgstr "važno"
 msgid "Total Progress"
 msgstr "Ukupni napredak"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
 #: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
@@ -10237,6 +10321,26 @@ msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr ""
 "Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP \n"
+"        \taddress and net boot images to the machine. drakTermServ helps "
+"create/remove \n"
+"        \tthese entries.\n"
+"\t\t\t\n"
+"        \t(PCI cards may omit the image - etherboot will request the correct "
+"image. \n"
+"\t\t\tYou should also consider that when etherboot looks for the images, it "
+"expects \n"
+"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
+msgstr ""
+
 #: ../../harddrake/sound.pm:1
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
@@ -10356,6 +10460,13 @@ msgstr ""
 "x koordinata tekst boksa\n"
 "u broju karaktera"
 
+#: ../../fsedit.pm:1
+#, c-format
+msgid ""
+"You may not be able to install lilo (since lilo doesn't handle a LV on "
+"multiple PVs)"
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1
 #, c-format
 msgid "Updating package selection"
@@ -10655,6 +10766,16 @@ msgstr "Potrebno je ime hosta"
 msgid "Unselect fonts installed"
 msgstr "Deselektovani fontovi instalirani"
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Točkić"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Submit kernel version"
+msgstr "Verzija kernela"
+
 #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1
@@ -10676,11 +10797,6 @@ msgstr "Poništi"
 msgid "Searching for configured scanners ..."
 msgstr "Tražim podešene skenere ..."
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Wheel"
-msgstr "Točkić"
-
 #: ../../harddrake/data.pm:1
 #, c-format
 msgid "Videocard"
@@ -10749,6 +10865,11 @@ msgstr "Podrazumevano"
 msgid "Button 2 Emulation"
 msgstr "Emulacija 2 tastera"
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Please enter a package name."
+msgstr "Odredite korisničko ime"
+
 #: ../../security/l10n.pm:1
 #, fuzzy, c-format
 msgid "Run chkrootkit checks"
@@ -10832,6 +10953,11 @@ msgstr ""
 "\tStew Benedict sbenedict\\@mandrakesoft.com\n"
 "\n"
 
+#: ../../install_messages.pm:1
+#, c-format
+msgid "http://www.mandrakelinux.com/en/92errata.php3"
+msgstr "http://www.mandrakelinux.com/en/92errata.php3"
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Honduras"
@@ -11001,6 +11127,45 @@ msgstr "Ključ za enkripciju fajl sistema"
 msgid "Gujarati"
 msgstr "Gujarati"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        While you can use a pool of IP addresses, rather than setup a "
+"specific entry for\n"
+"        a client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"        of client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
+"either be 'thin'\n"
+"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+"        most software on the client machine. A special inittab, %s is\n"
+"        written for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"        modified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+"        subnet.\n"
+"\t\t\t\n"
+"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
+"Clients can either \n"
+"        be 'true' or 'false'.  'true' enables root login at the client "
+"machine and allows local \n"
+"        hardware configuration of sound, mouse, and X, using the 'drak' "
+"tools. This is enabled \n"
+"        by creating separate config files associated with the client's IP "
+"address and creating \n"
+"        read/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+"        with the configuration, you can remove root login privileges from "
+"the client.\n"
+"\t\t\t\n"
+"        Note: You must stop/start the server after adding or changing "
+"clients."
+msgstr ""
+
 #: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
@@ -11335,45 +11500,6 @@ msgstr ""
 "\n"
 "http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run \n"
-"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
-"\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
-"security issues in \n"
-"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"\t\t\tsubnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine "
-"and allows local \n"
-"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
-"This is enabled \n"
-"\t\t\tby creating separate config files associated with the client's IP "
-"address and creating \n"
-"\t\t\tread/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"\t\t\twith the configuration, you can remove root login privileges from the "
-"client.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients."
-msgstr ""
-
 #: ../../standalone/drakconnect:1
 #, c-format
 msgid "Configure Local Area Network..."
@@ -11790,23 +11916,11 @@ msgstr "/dev/hda"
 msgid "/dev/hdb"
 msgstr "/dev/hdb"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
+"Application Name\n"
+"or Full Path:"
 msgstr ""
 
 #: ../../services.pm:1
@@ -12203,28 +12317,6 @@ msgstr "Problemi pri instalaciji %s paketa"
 msgid "You will receive an alert if the load is higher than this value"
 msgstr "Oglasiće se alarm ukoliko je učitano veće od ove vrednosti"
 
-#: ../../standalone/drakbug:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"Da bi prijavili bag, kliknite na taster prijava.\n"
-"Ovo će otvoriti prozor web pretraživača sa adresom https://drakbug."
-"mandrakesoft.com\n"
-" gde će te pronaći formular koji treba da popunite.Informacija koja je gore "
-"prokazana će biti \n"
-"prebačena na taj server\n"
-"\n"
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Add a scanner manually"
@@ -12368,7 +12460,7 @@ msgstr ""
 "\n"
 "Podesite shell pauzu. Vrednost zero - nula znači da nema pauze."
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid "Firmware copy succeeded"
 msgstr ""
@@ -12740,11 +12832,6 @@ msgstr ""
 "Štampač \"%s\" već postoji,\n"
 "da li stvarno želite da ponovo upišete njegove opcije?"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No partition available"
-msgstr "nema dostupnih particija"
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Use the scanners on hosts: "
@@ -12755,6 +12842,11 @@ msgstr "Koristi skenere na hostovima: "
 msgid "Unselected All"
 msgstr "Deselektuj Sve"
 
+#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "nema dostupnih particija"
+
 #: ../../standalone/printerdrake:1
 #, fuzzy, c-format
 msgid "Printer Management \n"
@@ -12795,7 +12887,7 @@ msgstr "Kompajliraj celi Kernel -->"
 msgid "modem"
 msgstr "Modem"
 
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
 #, c-format
 msgid "Welcome to %s"
 msgstr "Dobrošli u  %s"
@@ -12872,6 +12964,15 @@ msgstr ""
 msgid "Not the correct CD label. Disk is labelled %s."
 msgstr "NIje ipstavna oznaka CDa. Disk je označen sa %s."
 
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Daemon, %s via:\n"
+msgstr ""
+"\n"
+"- Demonn (%s) uključuje :\n"
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid ""
@@ -13011,26 +13112,6 @@ msgstr ""
 "\n"
 "- Sistemski fajlovi:\n"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be turned\n"
-"        back off, retaining the configuration files, once the client machine "
-"is configured."
-msgstr ""
-
 #: ../../standalone/drakbug:1
 #, c-format
 msgid "Standalone Tools"
@@ -13897,7 +13978,7 @@ msgstr ""
 msgid "Local Printer"
 msgstr "Lokalni štampač"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
 msgid "Floppy access error, unable to mount device %s"
 msgstr "Gde biste da montirate %s uređaj ?"
@@ -14002,36 +14083,6 @@ msgstr "Miš je postavljen na uređaj: %s\n"
 msgid "Reselect correct fonts"
 msgstr "Ponovo selektuj ispravne fontove"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs its images."
-msgstr ""
-
 #: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
@@ -14298,6 +14349,11 @@ msgstr "Maj"
 msgid "Yaboot mode"
 msgstr "Yaboot mod"
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generički 3 tastera miš"
+
 #: ../../standalone/drakxtv:1
 #, c-format
 msgid "USA (cable)"
@@ -14313,11 +14369,6 @@ msgstr ""
 "Pokrenite \"lilo\" kao root iz komandne linije da bi završili instalciju "
 "teme za LiLo starter."
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generički 3 tastera miš"
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Select another media to restore from"
@@ -14657,23 +14708,6 @@ msgid ""
 " --id <id_label>       - load the html help page which refers to id_label\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
-msgstr ""
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Select a scanner model"
@@ -15083,11 +15117,6 @@ msgstr "Ime domena"
 msgid "Sharing of local printers"
 msgstr "Deljenje lokalnih štampača"
 
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/92errata.php3"
-msgstr "http://www.mandrakelinux.com/en/92errata.php3"
-
 #: ../../security/help.pm:1
 #, fuzzy, c-format
 msgid "Enable/Disable libsafe if libsafe is found on the system."
@@ -15101,6 +15130,11 @@ msgstr ""
 msgid "Available printers"
 msgstr "Dostupni štampači"
 
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "NO"
+msgstr "INFO"
+
 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Empty"
@@ -15137,21 +15171,6 @@ msgstr ""
 "\n"
 "Pritisnite \"U redu\" za nastavak."
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images. To create the file \n"
-"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \t\tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
 #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Interface \"%s\""
@@ -15994,6 +16013,17 @@ msgstr "FATALNA"
 msgid "Refresh the list"
 msgstr "Osveži listu"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client %s:\n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tdrakTermServ will help create these files."
+msgstr ""
+
 #: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
@@ -16565,12 +16595,17 @@ msgstr "Generic"
 msgid "Cylinder %d to %d\n"
 msgstr "Cilindar %d do %d\n"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "YOUR TEXT HERE"
+msgstr ""
+
 #: ../../standalone/drakconnect:1
 #, c-format
 msgid "New profile..."
 msgstr "Novi profil..."
 
-#: ../../standalone/draksec:1
+#: ../../modules/interactive.pm:1 ../../standalone/draksec:1
 #, c-format
 msgid "NONE"
 msgstr ""
@@ -17154,6 +17189,11 @@ msgstr "Drugi multimedijalni uređaji"
 msgid "burner"
 msgstr "Štampač"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Bug Description/System Information"
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid " (Default is all users)"
@@ -17288,6 +17328,26 @@ msgstr "Dialup opcije"
 msgid "If no port is given, 631 will be taken as default."
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client system configuration files:\n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+"        Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local "
+"configuration can be\n"
+"        turned back off, retaining the configuration files, once the client "
+"machine is configured."
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
@@ -17519,7 +17579,7 @@ msgstr ""
 "LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/"
 "lp1, ...)."
 
-#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
 msgid "Next"
 msgstr "Sledeći"
@@ -18863,7 +18923,7 @@ msgstr ""
 msgid "format of floppies supported by the drive"
 msgstr "Format disketa koje uređaj prihvata"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid "Firmware copy failed, file %s not found"
 msgstr ""
@@ -19588,6 +19648,11 @@ msgstr ""
 "\n"
 "Da li se pristajete da izgubite sve particije?\n"
 
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Find Package"
+msgstr "%d paketa"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Are you sure that you want to set up printing on this machine?\n"
@@ -19703,6 +19768,24 @@ msgstr "LAN konfiguracija"
 msgid "hard disk model"
 msgstr "model hard diska"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/exports:\n"
+"        \tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \tdiskless clients.\n"
+"\n"
+"        \tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t/\t\t\t\t\t(ro,all_squash)\n"
+"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"        \tWith SUBNET/MASK being defined for your network."
+msgstr ""
+
 #: ../../fsedit.pm:1
 #, c-format
 msgid "You can't use a LVM Logical Volume for mount point %s"
@@ -19887,16 +19970,16 @@ msgstr "UK tastatura"
 msgid "Unmount"
 msgstr "Demontiraj"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Uninstall Fonts"
-msgstr "Deinstaliraj fontove"
-
 #: ../../mouse.pm:1
 #, c-format
 msgid "Microsoft Explorer"
 msgstr "Microsoft Explorer"
 
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Uninstall Fonts"
+msgstr "Deinstaliraj fontove"
+
 #: ../../keyboard.pm:1
 #, c-format
 msgid "German (no dead keys)"
@@ -20264,17 +20347,6 @@ msgstr "Pokrećem \"%s\" ..."
 msgid "enable radio support"
 msgstr "omogući podršku za radio"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \t\tdrakTermServ will help create these files."
-msgstr ""
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Scanner sharing to hosts: "
@@ -20708,6 +20780,31 @@ msgstr ""
 "Skup alata za čitanje i slanje el.pošte i vesti (pine, mutt, tin..) i za "
 "pretraživanje Interneta"
 
+#~ msgid ""
+#~ "XawTV isn't installed!\n"
+#~ "\n"
+#~ "\n"
+#~ "If you do have a TV card but DrakX has neither detected it (no bttv nor "
+#~ "saa7134\n"
+#~ "module in \"/etc/modules\") nor installed xawtv, please send the\n"
+#~ "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+#~ "with subject \"undetected TV card\".\n"
+#~ "\n"
+#~ "\n"
+#~ "You can install it by typing \"urpmi xawtv\" as root, in a console."
+#~ msgstr ""
+#~ "XawTV nije instaliran!\n"
+#~ "\n"
+#~ "\n"
+#~ "Ukoliko imate TV karticu ali je DrakX nije detektovao (bez bttv ili\n"
+#~ "saa7134 modula u \"/etc/modules\") niti je instalirao xawtv, molim vas da "
+#~ "pošaljete\n"
+#~ "rezultate od \"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\"\n"
+#~ "sa subjektom \"undetected TV card\".\n"
+#~ "\n"
+#~ "\n"
+#~ "Nožete ga instalirati ukucavanjem \"urpmi xawtv\" kao root, u konzoli."
+
 #~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
 #~ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"