updated pot file

1 files changed, 738 insertions, 541 deletions

diff --git a/perl-install/share/po/ro.po b/perl-install/share/po/ro.po
index 2b1149726..83128c8e1 100644
--- a/perl-install/share/po/ro.po
+++ b/perl-install/share/po/ro.po
@@ -25,16 +25,18 @@ msgstr ""
 "Partajarea per-utilizator folosește grupul \"fileshare\".\n"
 "Puteți folosi userdrake pentru adăuga un utilizator la acest grup."
 
-#: ../../any.pm:1 ../../bootlook.pm:1 ../../install_steps_gtk.pm:1
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../any.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
 #: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
 #: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
-#: ../../standalone/drakgw:1 ../../standalone/draksec:1
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
+#: ../../standalone/draksec:1 ../../standalone/logdrake:1
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid "Cancel"
 msgstr "Renunță"
@@ -114,16 +116,15 @@ msgid "Country"
 msgstr "Țara:"
 
 #: ../../any.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "Alegeți limba"
+
+#: ../../any.pm:1
 #, c-format
 msgid "Use Unicode by default"
 msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Toate"
-
 #: ../../any.pm:1
 #, c-format
 msgid ""
@@ -504,6 +505,16 @@ msgstr "Limitează opțiunile liniei de comandă"
 
 #: ../../any.pm:1
 #, c-format
+msgid "Force No APIC"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Demarare de pe CD activă?"
+
+#: ../../any.pm:1
+#, c-format
 msgid "Delay before booting default image"
 msgstr "Timp de așteptare înaintea demarării imaginii standard"
 
@@ -558,6 +569,11 @@ msgid "On Floppy"
 msgstr "Dischetă de demaraj"
 
 #: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Primul sector al partiției de demaraj"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -795,235 +811,6 @@ msgstr ""
 "asteptati %d secunde pentru demararea din oficiu.\n"
 "\n"
 
-#: ../../bootlook.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, vreau autologare cu acest (utilizator, desktop)"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "No, I don't want autologin"
-msgstr "Nu, nu vreau autologare"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Lansează mediul grafic la pornirea sistemului dvs."
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "System mode"
-msgstr "Mod sistem"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Bootsplash"
-msgstr "Imagine la demaraj"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Lilo screen"
-msgstr "Ecran LILO"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Themes"
-msgstr "Teme"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Splash selection"
-msgstr "Selectare imagine de pornire"
-
-#: ../../bootlook.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Configurează"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"În prezent folosiți %s ca manager de pornire.\n"
-"Clic pe Configurează pentru a lansa Asistentul de configurare."
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Instalare cu succes a temelor lilo și Imagine de la demaraj"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Theme installation failed!"
-msgstr "Instalare teme eșuată!"
-
-#: ../../bootlook.pm:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Notice"
-msgstr "Notificare"
-
-#: ../../bootlook.pm:1 ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "Eroare"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Relansează 'lilo'"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr ""
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr ""
-"Nu pot scrie /etc/sysconfig/bootsplash\n"
-"Nu găsesc fișierul."
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Write %s"
-msgstr "Scrie %s"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Nu pot scrie fișierul /etc/sysconfig/bootsplash."
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Lilo message not found"
-msgstr "nu găsesc mesajul LILO"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Copy %s to %s"
-msgstr "Copiez %s în %s"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Create new theme"
-msgstr "Creează o temă nouă "
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Afișează tema\n"
-"sub consolă"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Install themes"
-msgstr "Instalare teme"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Lilo/grub mode"
-msgstr "Mod LILO/Grub"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Yaboot mode"
-msgstr "Mod Yaboot"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Launch Aurora at boot time"
-msgstr "Lansează Aurora la pornire"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor tradițional Gtk+"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Traditional Monitor"
-msgstr "Monitor tradițional"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "NewStyle Monitor"
-msgstr "Monitor stil nou"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "NewStyle Categorizing Monitor"
-msgstr "Categorisire monitor stil nou"
-
-#: ../../bootlook.pm:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Fișier/_Termină"
-
-#: ../../bootlook.pm:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_File"
-msgstr "/_Fișier"
-
-#: ../../bootlook.pm:1
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Configurare stil demarare"
-
 #: ../../common.pm:1
 #, c-format
 msgid "consolehelper missing"
@@ -1181,12 +968,28 @@ msgid "You can't use a LVM Logical Volume for mount point %s"
 msgstr "Nu puteți folosi volumul logic LVM pentru punctul de montare %s"
 
 #: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Ați selectat o partiție RAID software pentru /root.\n"
+"Nici un gestionar de demaraj nu e capabil să folosească aceasta fără\n"
+"o partiție /boot. Adăugați deci o partiție /boot"
+
+#: ../../fsedit.pm:1
 #, c-format
 msgid "There is already a partition with mount point %s\n"
 msgstr "Există deja o partiție cu punctul de montare %s!\n"
 
 #: ../../fsedit.pm:1
 #, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, c-format
 msgid "Mount points must begin with a leading /"
 msgstr "Punctele de montare trebuie sa înceapă cu un /"
 
@@ -1219,6 +1022,15 @@ msgstr ""
 "\n"
 "Sunteți de acord să pierdeți toate partițiile?\n"
 
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Error"
+msgstr "Eroare"
+
 #: ../../fsedit.pm:1
 #, c-format
 msgid "server"
@@ -1317,8 +1129,8 @@ msgid ""
 "\n"
 " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
 "primary language you have chosen. But here, just as in your choice of a\n"
-"keyboard, you may not be in the country for which the chosen language\n"
-"should correspond. You may need to click on the \"Timezone\" button to\n"
+"keyboard, you may not be in a country to which the chosen language\n"
+"corresponds. You may need to click on the \"Timezone\" button to\n"
 "configure the clock for the correct timezone.\n"
 "\n"
 " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
@@ -1331,7 +1143,7 @@ msgid ""
 "\n"
 " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
 "interface in \"800x600\" resolution. If that does not suits you, click on\n"
-"the button to reconfigure your grapical interface.\n"
+"the button to reconfigure your graphical interface.\n"
 "\n"
 " * \"Network\": If you want to configure your Internet or local network\n"
 "access now, you can by clicking on this button.\n"
@@ -1521,7 +1333,7 @@ msgid ""
 "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
 "(\"On Floppy\").\n"
 "\n"
-"Checking \"Create a boot disk\" allows you to have a rescue bot media\n"
+"Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
 "handy.\n"
 "\n"
 "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
@@ -1636,7 +1448,7 @@ msgid ""
 "``incorrect'' password will have to be used the first time you connect.\n"
 "\n"
 "If you wish access to this computer to be controlled by an authentication\n"
-"server, clisk the \"Advanced\" button.\n"
+"server, click the \"Advanced\" button.\n"
 "\n"
 "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
 "services, select the appropriate one as \"authentication\". If you do not\n"
@@ -2036,7 +1848,7 @@ msgstr ""
 #: ../../help.pm:1
 #, c-format
 msgid ""
-"Checking \"Create a boot disk\" allows you to have a rescue bot media\n"
+"Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
 "handy.\n"
 "\n"
 "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
@@ -2087,7 +1899,7 @@ msgid ""
 "\n"
 "   You can choose here resolutions and color depth between those available\n"
 "for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). Asample of the chosen\n"
+"able to change that after installation though). A sample of the chosen\n"
 "configuration is shown in the monitor."
 msgstr ""
 
@@ -2133,7 +1945,7 @@ msgid ""
 "\n"
 "   You can choose here resolutions and color depth between those available\n"
 "for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). Asample of the chosen\n"
+"able to change that after installation though). A sample of the chosen\n"
 "configuration is shown in the monitor.\n"
 "\n"
 "\n"
@@ -2496,12 +2308,14 @@ msgstr ""
 
 #: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid "No"
 msgstr "Nu"
 
 #: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid "Yes"
 msgstr "Da"
@@ -2600,6 +2414,13 @@ msgstr "Șterge Windows(TM)"
 msgid "There is no FAT partition to resize (or not enough space left)"
 msgstr ""
 
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
+msgstr ""
+
 #: ../../install_interactive.pm:1
 #, c-format
 msgid "FAT resizing failed: %s"
@@ -2957,6 +2778,26 @@ msgstr ""
 msgid "Entering step `%s'\n"
 msgstr "Începe etapa `%s'\n"
 
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Help"
+msgstr "Ajutor"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "Reconfigurează"
+
+#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, c-format
+msgid "Configure"
+msgstr "Configurează"
+
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Go on anyway?"
@@ -3170,14 +3011,6 @@ msgstr "Următorul ->"
 msgid "Individual package selection"
 msgstr "Selectare individuală a pachetelor"
 
-#: ../../install_steps_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#, c-format
-msgid "Help"
-msgstr "Ajutor"
-
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Package Group Selection"
@@ -3392,12 +3225,13 @@ msgid "This password is too short (it must be at least %d characters long)"
 msgstr ""
 "Această parolă e prea simplă (ar trebui să fie de cel puțin %d caractere)"
 
+#. -PO: keep this short or else the buttons will not fit in the window
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "No password"
 msgstr "Nici o parolă"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Set root password"
 msgstr "Alegeți parola pentru root"
@@ -3458,11 +3292,6 @@ msgstr "Securitate"
 msgid "Security Level"
 msgstr "Nivel de securitate:"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "not configured"
-msgstr "Reconfigurează"
-
 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
 #, c-format
 msgid "Network"
@@ -3566,6 +3395,16 @@ msgid "Which is your timezone?"
 msgstr "Care este zona dvs. de timp?"
 
 #: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Doriți să configurați tipărirea?"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Nu pot executa fork: %s"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Contacting the mirror to get the list of available packages..."
 msgstr ""
@@ -3643,6 +3482,11 @@ msgstr ""
 "Dacă nu vă lispsesc decît cîteva CD-uri, deselectați-le și faceți click pe "
 "Ok."
 
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#, c-format
+msgid "All"
+msgstr "Toate"
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Truly minimal install (especially no urpmi)"
@@ -3718,6 +3562,11 @@ msgstr ""
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
+msgid "Looking for available packages..."
+msgstr "Căutarea pachetelor disponibile"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
 msgid "Finding packages to upgrade..."
 msgstr "Cautarea pachetelor de actualizat"
 
@@ -3728,11 +3577,6 @@ msgstr "Căutare pachetele instalate deja ..."
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Looking for available packages..."
-msgstr "Căutarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
 msgid "Looking for available packages and rebuilding rpm database..."
 msgstr "Căutare pachete disponibile și reconstrucție bază de date RPM..."
 
@@ -3837,11 +3681,6 @@ msgid "Please choose your type of mouse."
 msgstr "Vă rog să alegeți tipul de mouse folosit."
 
 #: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Upgrade"
-msgstr "Actualizare"
-
-#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
 msgid "Upgrade %s"
 msgstr "Actualizare"
@@ -3866,17 +3705,21 @@ msgstr ""
 msgid "Please choose your keyboard layout."
 msgstr "Vă rog să alegeți dispunerea tastaturii."
 
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Quit"
+msgstr "Terminare"
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "License agreement"
 msgstr "Termeni de licențiere"
 
 #: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "default:LTR"
-msgstr "Implicit"
-
-#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "An error occurred"
 msgstr "A apărut o eroare"
@@ -4431,6 +4274,11 @@ msgstr ""
 
 #: ../../keyboard.pm:1
 #, c-format
+msgid "Arabic"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
 msgid "Armenian (phonetic)"
 msgstr "Armeană (fonetic)"
 
@@ -5589,6 +5437,11 @@ msgstr "Andorra"
 msgid "Afghanistan"
 msgstr "Afganistan"
 
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "default:LTR"
+msgstr "Implicit"
+
 #: ../../loopback.pm:1
 #, c-format
 msgid "Circular mounts %s\n"
@@ -6007,7 +5860,7 @@ msgstr ""
 #, c-format
 msgid ""
 "Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
 
 #: ../../services.pm:1
@@ -6276,8 +6129,8 @@ msgstr ""
 #: ../../standalone.pm:1
 #, c-format
 msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] "
-"[--dynamic=dev]"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 msgstr ""
 
 #: ../../standalone.pm:1
@@ -6407,8 +6260,8 @@ msgid "Exit install"
 msgstr "Ieșire din instalare"
 
 #: ../../steps.pm:1
-#, c-format
-msgid "Install system updates"
+#, fuzzy, c-format
+msgid "Install updates"
 msgstr "Instalare actualizări pt. sistem"
 
 #: ../../steps.pm:1
@@ -6437,6 +6290,11 @@ msgid "Add a user"
 msgstr "Adaugă un utilizator"
 
 #: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "Nici o parolă"
+
+#: ../../steps.pm:1
 #, c-format
 msgid "Install system"
 msgstr "Instalare sistem"
@@ -6483,7 +6341,7 @@ msgstr ""
 
 #: ../../steps.pm:1
 #, c-format
-msgid "Choose your language"
+msgid "Language"
 msgstr "Alegeți limba"
 
 #: ../../ugtk2.pm:1
@@ -6491,6 +6349,14 @@ msgstr "Alegeți limba"
 msgid "utopia 25"
 msgstr ""
 
+#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "OK"
+
 #: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
 msgid "logdrake"
@@ -6670,7 +6536,7 @@ msgstr ""
 
 #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
 #, c-format
 msgid "Options"
 msgstr "Opțiuni"
@@ -6695,14 +6561,6 @@ msgstr "Monitor"
 msgid "Graphic Card"
 msgstr "Placă grafică"
 
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakperm:1
-#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1
-#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "Quit"
-msgstr "Terminare"
-
 #: ../../Xconfig/monitor.pm:1
 #, c-format
 msgid "Vertical refresh rate"
@@ -7358,44 +7216,6 @@ msgid "Partition table of drive %s is going to be written to disk!"
 msgstr "Tabelul de partiții al perifericului %s va fi scris pe disc!"
 
 #: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Ați selectat o partiție RAID software pentru /root.\n"
-"Nici un gestionar de demaraj nu e capabil să folosească aceasta fără\n"
-"o partiție /boot. Adăugați deci o partiție /boot"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partiția pe care ați selecționat-o pentru adăugare ca root (/) e fizic "
-"localizată dincolo\n"
-"de cilindru 1024 pe discul fix și nu aveți nici o partiție /boot.\n"
-"Dacă planificați să folosiți LILO ca gestionar de demaraj, asigurați-vă că "
-"ați adăugat o partiție /boot."
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Îmi pare rău dar nu voi accepta să creez /boot atît de departe pe disc (pe "
-"un cilindru > 1024).\n"
-"Sau folosiți LILO și nu va funcționa, sau nu folosiți LILO și atunci nu\n"
-"aveți nevoie de /boot"
-
-#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "The package %s is needed. Install it?"
 msgstr "Pachetul %s este necesar. Doriți instalarea lui?"
@@ -7894,6 +7714,11 @@ msgstr ""
 
 #: ../../harddrake/data.pm:1
 #, c-format
+msgid "Firewire controllers"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, c-format
 msgid "(E)IDE/ATA controllers"
 msgstr ""
 
@@ -8026,7 +7851,7 @@ msgid ""
 "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
 "by default\n"
 "\n"
-"- \"grep snd-slot /etc/modules.conf\" will tell you what driver it\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
 "currently uses\n"
 "\n"
 "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
@@ -8440,7 +8265,7 @@ msgstr "Conectare la Internet"
 
 #: ../../network/adsl.pm:1
 #, c-format
-msgid "Sagem (using pppoe) usb"
+msgid "Sagem (using pppoa) usb"
 msgstr ""
 
 #: ../../network/adsl.pm:1
@@ -8544,13 +8369,13 @@ msgid "Zeroconf host name must not contain a ."
 msgstr ""
 
 #: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
+#, c-format
+msgid "Host name"
 msgstr "Nume gazdă"
 
 #: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Host name"
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
 msgstr "Nume gazdă"
 
 #: ../../network/ethernet.pm:1 ../../network/network.pm:1
@@ -8562,15 +8387,6 @@ msgid ""
 "want to use the default host name."
 msgstr ""
 
-#: ../../network/ethernet.pm:1
-#, c-format
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
 #: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
 msgid "Configuring network"
@@ -9165,6 +8981,11 @@ msgid "Start at boot"
 msgstr "Pornire la demaraj"
 
 #: ../../network/network.pm:1
+#, c-format
+msgid "Assign host name from DHCP address"
+msgstr ""
+
+#: ../../network/network.pm:1
 #, fuzzy, c-format
 msgid "Network Hotplugging"
 msgstr "Configurația rețelei"
@@ -9176,13 +8997,8 @@ msgstr "Urmărește id-ul plăcii de rețea (util pt. laptopuri)"
 
 #: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Automatic IP"
-msgstr "IP automat"
+msgid "DHCP host name"
+msgstr "Nume gazdă"
 
 #: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
@@ -9190,12 +9006,23 @@ msgstr "IP automat"
 msgid "Netmask"
 msgstr "Mască de rețea:"
 
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid "IP address"
 msgstr "Adresă IP"
 
 #: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Automatic IP"
+msgstr "IP automat"
+
+#: ../../network/network.pm:1
 #, c-format
 msgid " (driver %s)"
 msgstr " (driver %s)"
@@ -9437,7 +9264,7 @@ msgstr "PDQ"
 msgid "PDQ - Print, Don't Queue"
 msgstr "PDQ - Print, Don't Queue"
 
-#: ../../printer/detect.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Unknown Model"
 msgstr "Model necunoscut"
@@ -9449,6 +9276,11 @@ msgstr "Model necunoscut"
 
 #: ../../printer/main.pm:1
 #, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Port"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
 msgid "Host %s"
 msgstr "Nume gazdă"
 
@@ -9599,11 +9431,6 @@ msgstr "Printerdrake"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do you want to configure another printer?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid "Removing printer \"%s\"..."
 msgstr "Șterg imprimanta \"%s\"..."
 
@@ -9619,7 +9446,7 @@ msgstr "Șterge imprimanta"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Know how to use this printer"
+msgid "Learn how to use this printer"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -9718,11 +9545,6 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Learn how to use this printer"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid "Raw printer"
 msgstr ""
 
@@ -9756,6 +9578,7 @@ msgid "Add a new printer"
 msgstr "Adaugă o imprimantă nouă"
 
 #: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
 #, c-format
 msgid "Normal Mode"
 msgstr "Mod normal"
@@ -9782,6 +9605,11 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
+msgid "Display all available remote CUPS printers"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
 "its settings; to make it the default printer; or to view information about "
@@ -9804,16 +9632,6 @@ msgstr "Sistem de tipărire:"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Would you like to configure printing?"
-msgstr "Doriți să configurați tipărirea?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Preparing Printerdrake..."
-msgstr "Pregătesc PrinterDrake..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid "Checking installed software..."
 msgstr ""
 
@@ -9849,6 +9667,11 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
+msgid "Setting Default Printer..."
+msgstr "Imprimanta implicită"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid "Installing %s ..."
 msgstr "Instalare pachete..."
 
@@ -11113,6 +10936,35 @@ msgstr ""
 "imprimare și tipurile de conexiune."
 
 #: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, c-format
+msgid ")"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "("
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "Configurez imprimanta \"%s\"..."
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid "Searching for new printers..."
 msgstr "Imprimante disponibile"
@@ -11214,48 +11066,81 @@ msgid "Checking your system..."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+#, fuzzy, c-format
+msgid "Restarting CUPS..."
+msgstr "Repornește XFS"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
+msgid "This server is already in the list, it cannot be added again.\n"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "192.168.100.0/255.255.255.0\n"
+msgid "Examples for correct IPs:\n"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Modelul este corect"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Lipsește numele obiectului partajat Samba"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "192.168.100.0/24\n"
+msgid "Enter IP address and port of the host whose printers you want to use."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Imprimantă conectată la server CUPS"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Șterge cele selectate"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "Am detectat %s"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Adăugați un utilizator"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "10.1.*\n"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "10.0.0.*\n"
+msgid "IP address of host/network:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "192.168.100.194\n"
+msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Examples for correct IPs:\n"
+msgid "The entered host/network IP is not correct.\n"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
+msgid "Host/network IP address missing."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -11314,6 +11199,29 @@ msgstr ""
 msgid "Automatic correction of CUPS configuration"
 msgstr "Configurare automată CUPS"
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Gata"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "Coadă imprimare CUPS la distanță:"
+
 #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, fuzzy, c-format
 msgid "No remote machines"
@@ -11469,8 +11377,8 @@ msgstr ""
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
-"if set to yes, check for empty password, or a password while it should be "
-"in /etc/shadow or other users with id 0."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
 msgstr ""
 
 #: ../../security/help.pm:1
@@ -12963,6 +12871,11 @@ msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
+msgid "%s"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
 msgid "Please select data to backup..."
 msgstr ""
 
@@ -13213,16 +13126,6 @@ msgstr "Restaurează de pe Hard Disk"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Secure Connection"
-msgstr "Conexiune securizată"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "FTP Connection"
-msgstr "Conexiune FTP"
-
-#: ../../standalone/drakbackup:1
-#, c-format
 msgid "Use quota for backup files."
 msgstr ""
 
@@ -14056,6 +13959,188 @@ msgstr ""
 msgid "Installation of %s failed. The following error occured:"
 msgstr "Instalarea lui %s a eșuat. Următoarea eroare a apărut:"
 
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "No, I don't want autologin"
+msgstr "Nu, nu vreau autologare"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Da, vreau autologare cu acest (utilizator, desktop)"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Launch the graphical environment when your system starts"
+msgstr "Lansează mediul grafic la pornirea sistemului dvs."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "System mode"
+msgstr "Mod sistem"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Imagine la demaraj"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo screen"
+msgstr "Ecran LILO"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Themes"
+msgstr "Teme"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Splash selection"
+msgstr "Selectare imagine de pornire"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
+msgstr ""
+"În prezent folosiți %s ca manager de pornire.\n"
+"Clic pe Configurează pentru a lansa Asistentul de configurare."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Instalare cu succes a temelor lilo și Imagine de la demaraj"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Theme installation failed!"
+msgstr "Instalare teme eșuată!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Notificare"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Relaunch 'lilo'"
+msgstr "Relansează 'lilo'"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
+msgstr ""
+"Nu pot scrie /etc/sysconfig/bootsplash\n"
+"Nu găsesc fișierul."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Write %s"
+msgstr "Scrie %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Nu pot scrie fișierul /etc/sysconfig/bootsplash."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo message not found"
+msgstr "nu găsesc mesajul LILO"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Copy %s to %s"
+msgstr "Copiez %s în %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Backup %s to %s.old"
+msgstr ""
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Create new theme"
+msgstr "Creează o temă nouă "
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Afișează tema\n"
+"sub consolă"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Install themes"
+msgstr "Instalare teme"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo/grub mode"
+msgstr "Mod LILO/Grub"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Mod Yaboot"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Fișier/_Termină"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_File"
+msgstr "/_Fișier"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Boot Style Configuration"
+msgstr "Configurare stil demarare"
+
 #: ../../standalone/drakbug:1
 #, c-format
 msgid "No browser available! Please install one"
@@ -14186,6 +14271,16 @@ msgstr ""
 
 #: ../../standalone/drakconnect:1
 #, c-format
+msgid "Parameters"
+msgstr "Parametri"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet Connection Configuration"
+msgstr "Configurare conexiune la Internet"
+
+#: ../../standalone/drakconnect:1
+#, c-format
 msgid "DHCP Client"
 msgstr "Client DHCP"
 
@@ -14199,11 +14294,6 @@ msgstr "Placă Ethernet"
 msgid "Gateway"
 msgstr "Pasarelă"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parametri"
-
 #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
 msgid "Connection type: "
@@ -14216,11 +14306,6 @@ msgstr "Profil:"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "Configurare conexiune la Internet"
-
-#: ../../standalone/drakconnect:1
-#, c-format
 msgid "Internet connection configuration"
 msgstr "Configurare conexiune la Internet"
 
@@ -14485,8 +14570,8 @@ msgstr "Elimină un modul"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "omit raid modules"
-msgstr "Omite modulele raid"
+msgid "Add a module"
+msgstr "Adaugă un modul"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
@@ -14500,13 +14585,13 @@ msgstr "Dacă este necesar"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "force"
-msgstr "Forțează"
+msgid "omit raid modules"
+msgstr "Omite modulele raid"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Add a module"
-msgstr "Adaugă un modul"
+msgid "force"
+msgstr "Forțează"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
@@ -14520,23 +14605,18 @@ msgstr "Zonă expert"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "General"
-msgstr "General"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
 msgid "kernel version"
 msgstr "Versiune nucleu"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "DrakFloppy Error: %s"
-msgstr "Eroare DrakFloppy: %s"
+msgid "default"
+msgstr "Implicit"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "default"
-msgstr "Implicit"
+msgid "General"
+msgstr "General"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
@@ -14558,11 +14638,6 @@ msgstr "Dimensiune"
 msgid "Module name"
 msgstr "Nume modul"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Post Uninstall"
@@ -15177,6 +15252,11 @@ msgstr ""
 
 #: ../../standalone/drakperm:1
 #, c-format
+msgid "Path"
+msgstr "Cale"
+
+#: ../../standalone/drakperm:1
+#, c-format
 msgid "group :"
 msgstr "Grup :"
 
@@ -15234,11 +15314,6 @@ msgstr "Proprietate"
 
 #: ../../standalone/drakperm:1
 #, c-format
-msgid "Path"
-msgstr "Cale"
-
-#: ../../standalone/drakperm:1
-#, c-format
 msgid "Permissions"
 msgstr "Drepturi"
 
@@ -15254,19 +15329,6 @@ msgstr "navighează"
 
 #: ../../standalone/drakperm:1
 #, c-format
-msgid "select perm file to see/edit"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, c-format
 msgid "Edit current rule"
 msgstr ""
 
@@ -15317,6 +15379,19 @@ msgstr ""
 
 #: ../../standalone/drakperm:1
 #, c-format
+msgid "select perm file to see/edit"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid ""
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
 msgid "permissions"
 msgstr "drepturi"
 
@@ -15476,16 +15551,16 @@ msgid "Security Alerts:"
 msgstr "Alertări de securitate:"
 
 #: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Implicit: %s)"
-
-#: ../../standalone/draksec:1
 #, c-format
 msgid "Security Level:"
 msgstr "Nivel de securitate:"
 
 #: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (Implicit: %s)"
+
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
 "Standard: This is the standard security recommended for a computer that will "
@@ -15499,7 +15574,7 @@ msgid ""
 "which can accept\n"
 "              connections from many clients. If your machine is only a "
 "client on the Internet, you\n"
-"\t      should choose a lower level.\n"
+"           should choose a lower level.\n"
 "\n"
 "Paranoid:  This is similar to the previous level, but the system is entirely "
 "closed and security\n"
@@ -15508,7 +15583,7 @@ msgid ""
 "Security Administrator:\n"
 "               If the 'Security Alerts' option is set, security alerts will "
 "be sent to this user (username or\n"
-"\t       email)"
+"            email)"
 msgstr ""
 
 #: ../../standalone/draksound:1
@@ -15837,26 +15912,6 @@ msgstr ""
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "/Options"
-msgstr "/Opțiuni"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect jazz drives"
-msgstr "Auto-detectat"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect modems"
-msgstr "Auto-detectat"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect printers"
-msgstr "Auto-detectat"
-
-#: ../../standalone/harddrake2:1
-#, c-format
 msgid "primary"
 msgstr "principal"
 
@@ -15872,6 +15927,16 @@ msgid ""
 msgstr ""
 
 #: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Model necunoscut"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "unknown"
+msgstr "Model necunoscut"
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid "Running \"%s\" ..."
 msgstr "Rulează \"%s\" ..."
@@ -15930,11 +15995,6 @@ msgstr "Despre HardDrake"
 msgid "/_About..."
 msgstr "/Despre..."
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Help"
-msgstr "/_Ajutor"
-
 #: ../../standalone/harddrake2:1
 #, c-format
 msgid "/_Report Bug"
@@ -15971,16 +16031,21 @@ msgstr "Ajutor HardDrake"
 msgid "/_Fields description"
 msgstr "Descriere"
 
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Help"
+msgstr "/_Ajutor"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/_Quit"
+msgstr "/_Termină"
+
 #: ../../standalone/harddrake2:1
 #, fuzzy, c-format
 msgid "/Autodetect _jazz drives"
 msgstr "Auto-detectat"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Options"
-msgstr "/_Opțiuni"
-
 #: ../../standalone/harddrake2:1
 #, fuzzy, c-format
 msgid "/Autodetect _modems"
@@ -15991,10 +16056,10 @@ msgstr "Auto-detectat"
 msgid "/Autodetect _printers"
 msgstr "Auto-detectat"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "/_Quit"
-msgstr "/_Termină"
+msgid "/_Options"
+msgstr "/_Opțiuni"
 
 #: ../../standalone/harddrake2:1
 #, c-format
@@ -16093,7 +16158,7 @@ msgstr "nivel"
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "Format of floppies the drive accept"
+msgid "Format of floppies supported by the drive"
 msgstr ""
 
 #: ../../standalone/harddrake2:1
@@ -16246,6 +16311,16 @@ msgstr ""
 
 #: ../../standalone/harddrake2:1
 #, c-format
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Drive capacity"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
 msgid "Size of the (second level) cpu cache"
 msgstr ""
 
@@ -16715,9 +16790,9 @@ msgid "Network Monitoring"
 msgstr "Configurația rețelei"
 
 #: ../../standalone/printerdrake:1
-#, c-format
-msgid "Reading printer data ..."
-msgstr "Citesc datele despre imprimante..."
+#, fuzzy, c-format
+msgid "Reading data of installed printers..."
+msgstr "Imprimante disponibile"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
@@ -16826,6 +16901,59 @@ msgid ""
 msgstr ""
 
 #: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "Imprimante disponibile"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for configured scanners ..."
+msgstr "Imprimante disponibile"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Partajare fișiere"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Add a scanner manually"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Imprimante disponibile"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "conectată direct la sistemul dvs."
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "conectată direct la sistemul dvs."
+
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
 msgid ""
 "Your %s has been configured.\n"
@@ -16837,16 +16965,6 @@ msgstr ""
 "Multimedia/Grafică."
 
 #: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Scanner-ul %s trebuie configurat de către PrinterDrake.\n"
-"Puteți lansa PrinterDrake în secțiunea Centrului de control Mandrake."
-
-#: ../../standalone/scannerdrake:1
 #, c-format
 msgid "choose device"
 msgstr "Alegeți dispozitivul"
@@ -16860,75 +16978,67 @@ msgstr ""
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "The %s is unsupported"
-msgstr "Scanner-ul %s nu este susținut"
+msgid "Searching for scanners ..."
+msgstr "Imprimante disponibile"
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "%s nu are susținere în această versiune a Mandrake Linux."
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "%s nu are susținere în această versiune a Mandrake Linux."
+msgid "Auto-detect available ports"
+msgstr "Auto-detectat"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "(Note: Parallel ports cannot be auto-detected)"
 msgstr ""
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Imprimante disponibile"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
+"Scanner-ul %s trebuie configurat de către PrinterDrake.\n"
+"Puteți lansa PrinterDrake în secțiunea Centrului de control Mandrake."
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Imprimante disponibile"
+msgid "The %s is unsupported"
+msgstr "Scanner-ul %s nu este susținut"
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Partajare fișiere"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "%s nu are susținere în această versiune a Mandrake Linux."
 
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Add a scanner manually"
-msgstr ""
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "%s nu are susținere în această versiune a Mandrake Linux."
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Imprimante disponibile"
+msgid "Port: %s"
+msgstr "Port"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid ", "
 msgstr ""
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "conectată direct la sistemul dvs."
+msgid "Detected model: %s"
+msgstr "Model detectat: %s %s"
 
 #: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "conectată direct la sistemul dvs."
+#, c-format
+msgid " ("
+msgstr ""
 
 #: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Select a scanner"
+#, fuzzy, c-format
+msgid "Select a scanner model"
 msgstr "Alegeți un scanner"
 
 #: ../../standalone/scannerdrake:1
@@ -17021,6 +17131,10 @@ msgid "Scientific Workstation"
 msgstr "Stație de lucru științifică"
 
 #: ../../share/compssUsers:999
+msgid "Scientific applications such as gnuplot"
+msgstr ""
+
+#: ../../share/compssUsers:999
 msgid "Console Tools"
 msgstr "Unelte consolă"
 
@@ -17094,12 +17208,14 @@ msgid "Apache, Pro-ftpd"
 msgstr "Apache, Pro-ftpd"
 
 #: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Poștă/Programe de lucru în grup/Știri"
+#, fuzzy
+msgid "Mail"
+msgstr "Mali"
 
 #: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server de mail Postfix, server de știri Inn"
+#, fuzzy
+msgid "Postfix mail server"
+msgstr "Server de mail Postfix"
 
 #: ../../share/compssUsers:999
 msgid "Database"
@@ -17197,6 +17313,87 @@ msgstr "Finanțe personale"
 msgid "Programs to manage your finances, such as gnucash"
 msgstr "Programe pentru administrarea banilor, ca gnucash"
 
+#~ msgid "DrakFloppy Error: %s"
+#~ msgstr "Eroare DrakFloppy: %s"
+
+#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
+#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
+
+#~ msgid "Launch Aurora at boot time"
+#~ msgstr "Lansează Aurora la pornire"
+
+#~ msgid "Traditional Gtk+ Monitor"
+#~ msgstr "Monitor tradițional Gtk+"
+
+#~ msgid "Traditional Monitor"
+#~ msgstr "Monitor tradițional"
+
+#~ msgid "NewStyle Monitor"
+#~ msgstr "Monitor stil nou"
+
+#~ msgid "NewStyle Categorizing Monitor"
+#~ msgstr "Categorisire monitor stil nou"
+
+#~ msgid "Secure Connection"
+#~ msgstr "Conexiune securizată"
+
+#~ msgid "FTP Connection"
+#~ msgstr "Conexiune FTP"
+
+#~ msgid "Mail/Groupware/News"
+#~ msgstr "Poștă/Programe de lucru în grup/Știri"
+
+#~ msgid "Postfix mail server, Inn news server"
+#~ msgstr "Server de mail Postfix, server de știri Inn"
+
+#~ msgid "/Options"
+#~ msgstr "/Opțiuni"
+
+#, fuzzy
+#~ msgid "/Autodetect jazz drives"
+#~ msgstr "Auto-detectat"
+
+#, fuzzy
+#~ msgid "/Autodetect modems"
+#~ msgstr "Auto-detectat"
+
+#, fuzzy
+#~ msgid "/Autodetect printers"
+#~ msgstr "Auto-detectat"
+
+#~ msgid ""
+#~ "The partition you've selected to add as root (/) is physically located "
+#~ "beyond\n"
+#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
+#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
+#~ "partition"
+#~ msgstr ""
+#~ "Partiția pe care ați selecționat-o pentru adăugare ca root (/) e fizic "
+#~ "localizată dincolo\n"
+#~ "de cilindru 1024 pe discul fix și nu aveți nici o partiție /boot.\n"
+#~ "Dacă planificați să folosiți LILO ca gestionar de demaraj, asigurați-vă "
+#~ "că ați adăugat o partiție /boot."
+
+#~ msgid ""
+#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
+#~ "> 1024).\n"
+#~ "Either you use LILO and it won't work, or you don't use LILO and you "
+#~ "don't need /boot"
+#~ msgstr ""
+#~ "Îmi pare rău dar nu voi accepta să creez /boot atît de departe pe disc "
+#~ "(pe un cilindru > 1024).\n"
+#~ "Sau folosiți LILO și nu va funcționa, sau nu folosiți LILO și atunci nu\n"
+#~ "aveți nevoie de /boot"
+
+#~ msgid "Upgrade"
+#~ msgstr "Actualizare"
+
+#~ msgid "Preparing Printerdrake..."
+#~ msgstr "Pregătesc PrinterDrake..."
+
+#~ msgid "Reading printer data ..."
+#~ msgstr "Citesc datele despre imprimante..."
+
 #~ msgid ""
 #~ "You must indicate where you wish to place the information required to "
 #~ "boot\n"