updated pot file

1 files changed, 12134 insertions, 12047 deletions

diff --git a/perl-install/share/po/lv.po b/perl-install/share/po/lv.po
index 60e6845d7..7410b5bdf 100644
--- a/perl-install/share/po/lv.po
+++ b/perl-install/share/po/lv.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: 2002-09-27 17:45+0200\n"
 "Last-Translator: Raivo Saars <spaiks@inbox.lv>\n"
 "Language-Team: Latvian <ll10nt@listes.murds.lv>\n"
@@ -13,997 +13,1516 @@ msgstr ""
 "Content-Type: text/plain; charset=iso-8859-13\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Pārmeklēju sadaļas, lai atrastu montēšanas punktus"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr ", tīkla printeris \"%s\", ports %s"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Lūdzu, ievietojiet disketi:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
 msgstr ""
-"Lietotāju koplietojumi izmanto grupu \"fileshare\". \n"
-"Jūs varat izmantot userdrake, lai šai grupai pievienotu lietotājus."
+"Sadaļu tabulas rezerves kopijai ir atšķirīgs izmērs\n"
+"Tomēr turpināt?"
 
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Cancel"
-msgstr "Atcelt"
+msgid "Which username"
+msgstr "Kurš lietotāja vārds"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Launch userdrake"
-msgstr "Izpildīt userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Kāda veida ierakstu gribat pievienot"
 
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Atjaunot sadaļu tabulu"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Uz CUPS servera \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Pēcinstalēšanas konfigurēšana"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Tā vietā izmantojiet ``%s''"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tips"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
 "\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
-"Vai vēlaties ļaut lietotājies koplietot savus direktorijus?\n"
-"Atļaujot šo, lietotājiem būs atļauts vienkārši noklikšķināt uz \"Koplietot\" "
-"konqueror\n"
-"vai nautilus programmās.\n"
-"\n"
-"\"Custom\" atļauj individuālu tiesību piešķiršanu.\n"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Iztrūkst obligātā pakotne %s."
+msgid "Sri Lanka"
+msgstr "Šrilanka"
 
-#: ../../any.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
 msgstr ""
-"Jūs varat eksportēt, lietojot NFS vai Samba. Lūdzu izvēlieties, kuru "
-"vēlaties lietot."
+"\n"
+"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Nepieciešams instalēt pakotni %s. Vai vēlaties to instalēt?"
+msgid "Central African Republic"
+msgstr "Centrāl Āfrikas republika"
 
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Custom"
-msgstr "Pielāgota"
+msgid "Gateway device"
+msgstr "Vārtejas ierīce"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Allow all users"
-msgstr "Atļaut visus lietotājus"
+msgid "Net Method:"
+msgstr "Tīkla metode:"
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Ethernetcard"
+msgstr "Ethernet karte"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "No sharing"
-msgstr "Bez koplietošanas"
+msgid "Parameters"
+msgstr "Parametri"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "More"
-msgstr "Vairāk"
+msgid "Auto-detect"
+msgstr "Automātiska noteikšana"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Šeit ir pilns pieejamo tastatūru saraksts"
+#
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface:"
+msgstr "Interfeiss:"
 
-#: ../../any.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Instalēšanas klases izvēle"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
+msgstr "uz CDROM"
+
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Lūdzu izvēlieties jūsu peles tipu."
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Šķiet, ja jūsu sistēmu nav pieslēgta Internetam.\n"
+"Mēģiniet pārkonfigurēt savienojumu."
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " / Region"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
 msgstr ""
+"Savienojiet Jūsu printeri ar Linux serveri, un ļaujiet Windows datoriem "
+"pieslēgties tam kā klientiem.\n"
+"\n"
+"Vai tiešām vēlaties turpināt uzstādīt printeri tā, kā darat to tagad?"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country"
-msgstr "Valsts:"
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Baltkrievija"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "Valodas izvēle"
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Kļūda, ierakstot failā %s"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Use Unicode by default"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
 msgstr ""
+"apmd paredzēts baterijas stāvokļa novērošanai un grāmatošanai ar syslog.\n"
+"To var izmantot arī datora izslēgšanai, kad baterija ir izlādēta."
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Jūs varat izvēlēties citas valodas, kas būs pieejamas pēc instalēšanas"
+msgid "Use tape to backup"
+msgstr "Dublēšanai lietot lentu"
 
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Please choose a language to use."
-msgstr "Lūdzu izvēlieties izmantojamo valodu."
+msgid "The following packages are going to be installed"
+msgstr "Tiks instalētas sekojošas pakotnes"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the window manager to run:"
-msgstr "Norādiet izmantojamo logu menedžeri:"
+msgid "CUPS configuration"
+msgstr "CUPS konfigurācija"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose the default user:"
-msgstr "Norādiet noklusēto lietotāju:"
+msgid "Hong Kong"
+msgstr "Honkonga"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Vai vēlaties izmantot aboot?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nepietiek brīvas vietas, lai izvietotu jaunas sadaļas"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr "Pārvietoju"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Drakbackup aktivitātes caur %s:\n"
+"\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "("
+msgstr ""
+
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
 msgstr ""
-"Sistēmu var konfigurēt tā, lai pēc startēšanas automātiski tiktu\n"
-"atvērta viena noteikta lietotāja sesija. \n"
-"Vai vēlaties lietot šo iespēju?"
+"Laipni lūdzam tīkla konfigurēšanas vednī.\n"
+"\n"
+"Tūlīt mēs konfigurēsim Jūsu internet/tīkla savienojumu.\n"
+"Ja nevēlaties lietot automātisko noteikšanu, noņemiet atzīmi no izvēles "
+"rūtiņas.\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "Autologin"
-msgstr "Autopieslēgšanās"
+msgid ")"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Icon"
-msgstr "Ikona"
+msgid "Lebanon"
+msgstr "Lībija"
 
-#: ../../any.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Shell"
-msgstr "Čaula"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Password (again)"
-msgstr "Parole (atkārtoti)"
+msgid "Stop"
+msgstr "Apturēt"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "atklāts %s"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Password"
-msgstr "Parole"
+msgid "No CD device defined!"
+msgstr "Nav nodefinēta CD iekārta!"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "User name"
-msgstr "Lietotāja vārds"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgāru (fonētiskā)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP start ip"
+msgstr "DHCP sākuma diapazons"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Real name"
-msgstr "Vārds un uzvārds"
+msgid "256 kB"
+msgstr "256 kB"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Accept user"
-msgstr "Apstiprināt lietotāju"
+msgid "Bootloader main options"
+msgstr "Sāknētāja galvenās opcijas"
 
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Done"
-msgstr "Izdarīts"
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Tape"
+msgstr "Lenta"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning network..."
+msgstr "Meklēju tīklā..."
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Enter a user\n"
-"%s"
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
 msgstr ""
-"Ievadiet lietotāju\n"
-"%s"
+"Ar šo opciju Jums būs iespēja atjaunot jebkuru /etc\n"
+"direktorijas versiju."
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Add user"
-msgstr "Pievienot lietotāju"
+msgid "Malaysia"
+msgstr "Malaizija"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "This user name has already been added"
-msgstr "Šāds lietotāja vārds jau ir pievienots"
+msgid "Swiss (French layout)"
+msgstr "Šveices (franču izvietojums)"
 
-#: ../../any.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "The user name is too long"
-msgstr "Lietotāja vārds ir pārāk garš"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid neizdevās (varbūt nav uzstādīti raidtools?)"
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Lietotāja vārdā var būt tikai mazie angļu burti, cipari, `-' un `_'"
+msgid "Webcam"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Please give a user name"
-msgstr "Lūdzu ievadiet lietotāja vārdu"
+msgid "size of the (second level) cpu cache"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Skaņas karte"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This password is too simple"
-msgstr "Šī parole ir pārāk vienkārša"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Lai izdrukātu failu no komandrindas (termināļa loga), izmantojiet komandu \"%"
+"s <fails>\".\n"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please try again"
-msgstr "Lūdzu mēģiniet vēlreiz"
+msgid "Level %s\n"
+msgstr "Līmenis %s\n"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The passwords do not match"
-msgstr "Paroles nesakrīt"
+msgid "Luxembourg"
+msgstr "Luksemburga"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "(already added %s)"
-msgstr "(jau pievienots %s)"
+msgid ""
+"\n"
+"                      DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+"                      DrakBackup dēmona ziņojums\n"
+"\n"
+"\n"
 
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
-msgstr "piekļuve kompilēšanas rīkiem"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "Irāka"
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "access to network tools"
-msgstr "piekļuve tīkla rīkiem"
+msgid "Bus"
+msgstr "Kopne"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "access to administrative files"
-msgstr "piekļuve administrēšanas failiem"
+msgid "Iraq"
+msgstr "Irāka"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "allow \"su\""
-msgstr "atļaut \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Potenciāls LAN adrešu konflikts atklāts šajā %s! konfigurācijā!\n"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "access to rpm tools"
-msgstr "piekļuve rpm rīkiem"
+msgid "Configuring..."
+msgstr "Konfigurēju..."
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "access to X programs"
-msgstr "piekļuve X programmām"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Uzstādīšana ir notikusi, un patreiz tā ir atļauts."
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
 msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
 msgstr ""
-"Šeit ir dažādi sāknēšanas ieraksti.\n"
-"Jūs varat pievienot jaunus vai izmainīt esošos."
+"Priekš vairuma mūsdienu TV kartēm GNU/Linux bttv modulis automātiski nosaka "
+"parametrus.\n"
+"Ja Jūsu karte tiek noteikta nepareizi, Jūs varat norādīt pareizos uztvērēja "
+"un kartes tipus šeit. Vienkārši izvēlieties kartes parametrus, ja "
+"nepieciešams"
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Other OS (windows...)"
-msgstr "Cita OS (windows...)"
+msgid "Password (again)"
+msgstr "Parole (atkārtoti)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Cita OS (MacOS...)"
+msgid "Search installed fonts"
+msgstr "Meklēt instalētos fontus"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Cita OS (SunOS...)"
+msgid "Venezuela"
+msgstr "Venecuēla"
 
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP adrese"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Kāda veida ierakstu gribat pievienot"
+msgid "Choose the sizes"
+msgstr "Izvēlieties izmērus"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This label is already used"
-msgstr "Šis nosaukums jau ir izmantots"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Bojāto datu saraksts:\n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "You must specify a root partition"
-msgstr "Jums ir nepieciešama root sadaļa"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You must specify a kernel image"
-msgstr "Jums jānorāda kodola attēls"
+msgid "Choose another partition"
+msgstr "Izvēlieties citu sadaļu"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Empty label not allowed"
-msgstr "Tukšs nosaukums nav atļauts"
+msgid "Current user"
+msgstr "Pašreizējais lietotājs"
 
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Default"
-msgstr "Noklusēts"
+msgid "Username"
+msgstr "Lietotāja vārds"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "NoVideo"
-msgstr "BezVideo"
+msgid "Left \"Windows\" key"
+msgstr "Kreisais \"Windows\" taustiņš"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Initrd-size"
-msgstr "Initrd-izmērs"
+msgid "dhcpd Server Configuration"
+msgstr "dhcpd servera konfigurācija"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Append"
-msgstr "Papildināt"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Label"
-msgstr "Nosaukums"
+msgid "Guyana"
+msgstr "Gajana"
 
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Unsafe"
-msgstr "Nedrošs"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " uz Novell servers \"%s\", printeris \"%s\""
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Table"
-msgstr "Tabula"
+msgid "Remove a module"
+msgstr "Noņemt moduli"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Password"
+msgstr "Parole"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Advanced Configuration"
+msgstr "Izvērsta konfigurācija"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr ", daudzfunkcionāla ierīce"
 
 #: ../../any.pm:1
 #, c-format
 msgid "Root"
 msgstr "Sakne"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Read-write"
-msgstr "Lasīt-rakstīt"
+msgid "Choose an existing RAID to add to"
+msgstr "Norādiet eksistējošu RAID, kam pievienot"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turcijas (modernais \"Q\" modelis)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Video mode"
-msgstr "Video režīms"
+msgid "Lilo message not found"
+msgstr "Lilo paziņojums nav atrasts"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Image"
-msgstr "Attēls"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Default OS?"
-msgstr "Noklusētā OS?"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Enable OF Boot?"
-msgstr "Atļaut OF ielādi?"
+msgid "if needed"
+msgstr "ja nepieciešams"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Enable CD Boot?"
-msgstr "Atļaut CD ielādi?"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Failed..."
+msgstr "Atjaunošana neizdevās..."
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Kerneļa ielādes taimauts"
+msgid "/Autodetect _jazz drives"
+msgstr "Automātiska noteikšana"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Open Firmware Delay"
+msgid ""
+"Description:\n"
+"\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
+"\n"
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
+"\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
+"\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
+"\n"
+"\n"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "Boot device"
-msgstr "Sāknējamā ierīce"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Init Message"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "Kuru OS ielādētāju lietot"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Parādīt pašreizējo interfeisa konfigurāciju"
 
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Bootloader main options"
-msgstr "Sāknētāja galvenās opcijas"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcijai ``Ierobežot komandrindas opcijas'' nav jēgas bez paroles"
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Ja jums ir ISA karte, vērtībām nākamajā ekrānā jābūt pareizām.\n"
+"\n"
+"Ja jums ir PCMCIA karte, jums ir jāzina kartes irq un io.\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Give the ram size in MB"
-msgstr "Norādiet atmiņas apjomu Mb"
+msgid "Do not print any test page"
+msgstr "Nedrukāt nevienu izmēģinājuma lapu"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Enable multiple profiles"
-msgstr "Atļaut multi profilus"
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ja nepieciešams, precizējiet RAM apjomu (atrasti %d MB)"
+msgid "Force No APIC"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Iztīrīt /tmp katras sāknēšanas laikā"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Šī parole ir pārāk vienkārša (jābūt vismaz %d simbolus garai)"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "Sistēmdisketes radīšana"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Tastatūra"
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "restrict"
-msgstr "ierobežot"
+msgid "FTP proxy"
+msgstr "FTP proxy"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Restrict command line options"
-msgstr "Ierobežot komandrindas opcijas"
+msgid "Install List"
+msgstr "Instalēšanas saraksts"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Force No APIC"
+msgid ""
+"Change\n"
+"Restore Path"
 msgstr ""
+"Izmainīt\n"
+"atjaunošanas ceļu"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Atļaut CD ielādi?"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Show only for the selected day"
+msgstr "Rādīt tikai izvēlētajai dienai"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Delay before booting default image"
-msgstr "Pauze pirms noklusētās sistēmas ielādes"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "compact"
-msgstr "kompakts"
+msgid "512 kB"
+msgstr "512 kB"
 
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Compact"
-msgstr "Kompakts"
+msgid "Logs"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Bootloader installation"
-msgstr "Sāknētāja instalēšana"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "First sector of boot partition"
-msgstr "Sāknējamās sadaļas pirmais sektors"
+msgid "<control>N"
+msgstr "<control>N"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Diska pirmais sektors (MBR)"
+msgid "What kind of card do you have?"
+msgstr "Kāds ir jūsu kartes tips?"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Kur jūs vēlaties instalēt sāknētāju?"
+msgid "<control>O"
+msgstr "<control>O"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalēšana"
+msgid "Security"
+msgstr "Drošība"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SILO Installation"
-msgstr "SILO instalēšana"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Skip"
-msgstr "Izlaist"
+msgid "<control>Q"
+msgstr "<control>Q"
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Saglabāt disketē"
+msgid "Unknown"
+msgstr "Nezināms modelis"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Sāknējamās sadaļas pirmais sektors"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Tīkla konfigurācija"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
 msgstr ""
-"Jūs nolēmāt sāknētāju instalēt uz diska sadaļas.\n"
-"Tas paredz, ka jums jau ir sāknētājs uz tā sāknējamā cietā diska (piem.: "
-"System Commander).\n"
-"\n"
-"Kurš ir jūsu sāknējamais disks?"
+"Citur pasaulē \n"
+" nav D-Channel (izdalītas līnijas)"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Creating bootdisk..."
-msgstr "Gatavoju sāknēšanas disketi"
+msgid "Option %s must be a number!"
+msgstr "Opcijai %s ir jābūt skaitlim!"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
 #, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ielieciet disketi iekārtā %s"
+msgid "Notice"
+msgstr "Brīdinājums"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Norādiet diskešu iekārtu, ko izmanto distetes veidošanai"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Second floppy drive"
-msgstr "Otrā diskešu iekārta"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "First floppy drive"
-msgstr "Pirmā diskešu iekārta"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Sekojošais printeris tika automātiski noteikts. Printera konfigurēšana "
+"darbosies pilnībā automātiski. Ja printeris netika noteikts pareizi, vai ja "
+"vēlaties piemērotu printera konfigurāciju, ieslēdziet \"Manuāla konfigurēšana"
+"\"."
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Diemžēl nav pieejama neviena diskešu iekārta"
+msgid "What type of partitioning?"
+msgstr "Kāds ir sadalījuma tips?"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
 msgstr ""
-"Pielāgotā sāknēšanas diskete piedāvā veidu, kā sāknēt jūsu Linux sistēmu\n"
-"neatkarīgi no parastā sāknētāja. Tas ir noderīgi, ja jūs nevēlaties savā\n"
-"sistēmā uzstādīt LILO (vai grub), vai kāda cita operētājsistēma izdzēš\n"
-"LILO, vai arī LILO nedarbojas ar jūsu dzelžu konfigurāciju. Pielāgoto\n"
-"sāknēšanas disketi var izmantot arī kopā ar Mandrake glabšanas attēlu,\n"
-"atvieglojot atjaunošanu pēc smagiem sistēmas bojājumiem. Vai vēlaties\n"
-"izveidot jūsu sistēmai pielāgotu sāknēšanas disketi?\n"
-"%s"
+"Pa FTP aizsūtīto failu saraksts: %s\n"
+" "
 
-#: ../../any.pm:1
+#
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Interfeiss"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"Options Description:\n"
 "\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
 "\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
+" - Backup User Files: \n"
 "\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
 "\n"
-"(BRĪDINĀJUMS! Jūs lietojat XFS priekš saknes diska sadaļas,\n"
-"ielādes diska izveide uz 1.44 Mb disketes visdrīzāk neizdosies,\n"
-"jo XFS nepieciešams ļoti apjomīgs draiveris)."
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
 "\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 msgstr ""
-"Pielāgotā sāknēšanas diskete piedāvā veidu, kā sāknēt jūsu Linux sistēmu\n"
-"neatkarīgi no parastā sāknētāja. Tas ir noderīgi, ja jūs nevēlaties savā\n"
-"sistēmā uzstādīt SILO, vai kāda cita operētājsistēma izdzēš SILO,\n"
-"vai arī SILO nedarbojas ar jūsu dzelžu konfigurāciju. Pielāgoto\n"
-"sāknēšanas disketi var izmantot arī kopā ar Mandrake glābšanas attēlu,\n"
-"atvieglojot atjaunošanu pēc smagiem sistēmas bojājumiem.\n"
-"\n"
-"Ja vēlaties izveidot jūsu sistēmai pielāgotu sāknēšanas disketi,\n"
-"ielieciet sisketi pirmajā iekārtā un nospiediet \"Labi\"."
 
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Jūs nevarat instalēt sāknētāju %s sadaļā\n"
+msgid "comma separated strings"
+msgstr "ar komatu atdalīta virkne"
 
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "not enough room in /boot"
-msgstr "nepietiek vietas /boot sadaļā"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Izdaliitais ieraksts tiks saakneets peec %d sekundeem."
+msgid "Messages"
+msgstr "Ziņojumi"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandas pirms saakneesanas, vai 'c', lai izsauktu komandrindu."
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Nezināms|CPH06X (bt878) [daudz pārdevēju]"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Nospiediet ievadu, lai saakneetu izveeleeto OS, 'e', lai redigeetu"
+msgid "POP and IMAP Server"
+msgstr "POP un IMAP serveris"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Izmantojiet taustinus %c un %c, lai izveeleetos vajadziigo ierakstu."
+msgid "Mexico"
+msgstr "Meksika"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Juus sveic GRUB, opereetaajsisteemu izveeles programma!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "ielādēt uzstādījumu"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Ruanda"
 
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Vai datorā ir kāds %s interfeiss?"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with text menu"
-msgstr "LILO ar teksta izvēlni"
+msgid "Switzerland"
+msgstr "Šveice"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO ar grafisko izvēlni"
+msgid "Brunei Darussalam"
+msgstr "Bruneja"
 
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Attāla lpd printera opcijas"
 
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
 "\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
-"Juus sveic %s, opereetaajsisteemu paarsleedzeejs!\n"
-"\n"
-"Sarakstaa izveelieties vajadziigo sisteemu vai gaidiet %d sekundes, liidz "
-"tiks ielaadeeta nokluseetaa sisteema.\n"
-"\n"
 
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "consolehelper missing"
-msgstr "konsoles palīgs nav pieejams"
+msgid "Configure Internet Access..."
+msgstr "Konfigurēt Interneta pieeju..."
 
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "kdesu missing"
-msgstr "trūkstošs kdesu"
+msgid "Norway"
+msgstr "Norvēģija"
 
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ekrāna attēli būs pieejami pēc instalēšanas %s."
+msgid "Danish"
+msgstr "Dānijas"
 
-#: ../../common.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Nevar izveidot ekrāna attēlus pirms sadaļu izveides"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
 
-#: ../../common.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "%d seconds"
-msgstr "%d sekundes"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Lūdzu ievadiet šī datora IP konfigurāciju.\n"
+"Visi dati jāievada kā IP adreses ar punktiem atdalītu decimālu\n"
+"skaitļu veidā (piemēram, 1.2.3.4)."
 
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 minūte"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linux instalācija ir sadalīta pa dažiem CD-ROM diskiem. DrakX\n"
+"zin, vai izvēlētā pakotne atrodas uz cita CD-ROM diska, izvirzīs pašreizējo\n"
+"kompaktdisku un palūgs ievietot citu pēc nepieciešamības."
 
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "%d minutes"
-msgstr "%d minūtes"
+msgid "Processors"
+msgstr ""
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bulgārija"
 
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Nav izvēlēta tīkla karte!"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "GB"
-msgstr "GB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbāra un Jana Mejena salas"
 
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "MB"
-msgstr "MB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Konfigurēšanas laikā uzradās problēmas.\n"
+"Pārbaudiet savienojumu ar net_monitor vai mcc. Ja savienojums nestrādā, Jūs, "
+"iespējams, vēlaties atkārtot konfigurēšanu."
 
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "KB"
-msgstr "KB"
+msgid "partition %s is now known as %s"
+msgstr "sadaļa %s tagad ir zināma kā %s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "United States"
-msgstr "A.S.V."
+msgid "Backup Other files..."
+msgstr "Dublēt citus failus..."
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Austria"
-msgstr "Austrija"
+msgid "SMB server IP"
+msgstr "SMB servera IP"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Italy"
-msgstr "Itālija"
+msgid "Congo (Kinshasa)"
+msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Netherlands"
-msgstr "Holande"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Iekārtas %s sadaļu tabula tiks ierakstīta uz diska!"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "Instalēju pakotnes..."
+
+#: ../../any.pm:1
 #, c-format
-msgid "Sweden"
-msgstr "Zviedrija"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Pielāgotā sāknēšanas diskete piedāvā veidu, kā sāknēt jūsu Linux sistēmu\n"
+"neatkarīgi no parastā sāknētāja. Tas ir noderīgi, ja jūs nevēlaties savā\n"
+"sistēmā uzstādīt LILO (vai grub), vai kāda cita operētājsistēma izdzēš\n"
+"LILO, vai arī LILO nedarbojas ar jūsu dzelžu konfigurāciju. Pielāgoto\n"
+"sāknēšanas disketi var izmantot arī kopā ar Mandrake glabšanas attēlu,\n"
+"atvieglojot atjaunošanu pēc smagiem sistēmas bojājumiem. Vai vēlaties\n"
+"izveidot jūsu sistēmai pielāgotu sāknēšanas disketi?\n"
+"%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", USB printer \\#%s"
+msgstr ", USB printeris \\/*%s"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Norway"
-msgstr "Norvēģija"
+msgid "Latvian"
+msgstr "Latviešu"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Greece"
-msgstr "Grieķija"
+msgid "monthly"
+msgstr "ik mēnesi"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Germany"
-msgstr "Vācija"
+msgid "Module name"
+msgstr "Moduļa nosaukums"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Czech Republic"
-msgstr "Čehijas Republika"
+msgid "Start at boot"
+msgstr "Sākt pie ielādes"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Lietot Pieaugošas Dublēšanas (neaizvietot iepriekšējās dublēšanas)"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Belgium"
-msgstr "Beļģija"
+msgid "First sector of drive (MBR)"
+msgstr "Diska pirmais sektors (MBR)"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "France"
-msgstr "Francija"
+msgid "Joystick"
+msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Costa Rica"
-msgstr "Kostarika"
+msgid "El Salvador"
+msgstr "Salvadora"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Kļūda, atverot %s ierakstīšanai: %s"
+msgid "Use Unicode by default"
+msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Nothing to do"
-msgstr "Nav ko darīt"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "GNU/Linux kodola modulis, kas regulē to ierīci"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nepietiek brīvas vietas, lai izvietotu automātiski"
+msgid "Trying to rescue partition table"
+msgstr "Mēģinu saglābt sadaļu tabulu"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Jūs nevarat lietot šifrēto failsistēmu montēšanas punktā %s"
+msgid "Option %s must be an integer number!"
+msgstr "Opcijai %s ir jābūt veselam skaitlim!"
 
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
 msgstr ""
-"Šim montēšanas punktam ir nepieciešama reāla failsistēma (ext2/ext3, "
-"reiserfs, xfs vai jfs)\n"
+"Ieraksti, kas Jums būs jāaizpilda:\n"
+"%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Šim katalogam ir jāpaliek saknes failsistēmā"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Neizdodas uzsākt uzlabošanu no tīkla !!!\n"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
+msgid "Name: "
+msgstr "Vārds: "
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Jūs izvēlējies programmatūras uzturētu RAID sadaļu kā saknes sadaļu (/).\n"
-"Neviens sāknētājs nespēj to izmantot bez /boot sadaļas.\n"
-"Tāpēc neaizmirstiet izveidot /boot sadaļu."
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 miljoni krāsu (24 biti)"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jau eksistē sadaļa ar montēšanas punktu %s\n"
+msgid "Allow all users"
+msgstr "Atļaut visus lietotājus"
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Printera vārdam jāsatur tikai burtus, ciparus un pasvītrojumu"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "Oficiālais MandrakeSoft veikals"
 
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Montēšanas punktiem jāsākas ar /"
+msgid "Resizing"
+msgstr "Mainu izmēru"
 
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS nevar izmantot sadaļām, kas mazākas par 32MB"
+msgid "Cable connection"
+msgstr "Kabeļa savienojums"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS nevar izmantot sadaļām, kas mazākas par 16MB"
+msgid "User"
+msgstr "Lietotājs"
 
 #: ../../fsedit.pm:1
 #, c-format
@@ -1023,922 +1542,267 @@ msgstr ""
 "\n"
 "Vai Jūs piekrītat zaudēt visas sadaļas?\n"
 
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error"
-msgstr "Kļūda"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Veiciet jaunu dublēšanu pirms atjaunošanas (tikai papildinošām rezerves "
+"kopijām.)"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Printeris uz paralēlā porta \\/*%s"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Vārds: "
+
+#: ../../raid.pm:1
 #, c-format
-msgid "server"
-msgstr "serveris"
+msgid "mkraid failed"
+msgstr "mkraid neizdevās"
 
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "with /usr"
-msgstr "ar /usr"
+msgid "Button 3 Emulation"
+msgstr "3. pogas emulācija"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "simple"
-msgstr "vienkāršs"
+msgid "Sending files..."
+msgstr "Nosūtu failus..."
 
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Formatēju sadaļu %s"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli (Phonetic)"
+msgstr "Izraēlas (fonētiskā)"
 
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "error unmounting %s: %s"
-msgstr "kļūda nomontējot %s: %s"
+msgid "access to rpm tools"
+msgstr "piekļuve rpm rīkiem"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "sadaļas %s montēšana direktorijā %s neizdevās"
+msgid "edit"
+msgstr "labot"
 
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Formatēju sadaļu %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Jums ir jānorāda/jāievada printeris/ierīce!"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Checking %s"
-msgstr "Kopēju %s"
+msgid "Permission problem accessing CD."
+msgstr "Atļaujas problēma, piekļūstot CD."
 
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Formatting partition %s"
-msgstr "Formatēju sadaļu %s"
+msgid "Phone number"
+msgstr "Telefona numurs"
 
-#: ../../fs.pm:1
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Veidoju un formatēju failu %s"
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Nav zināmu draiveru jūsu skaņu kartei (%s)"
 
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nezinu, kā formatēt %s, izmantojot tipu %s"
+msgid "Printer name, description, location"
+msgstr "Printera nosaukums, apraksts, atrašanās vieta"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatēšana %s neizdevās"
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Nospiediet \"Labi\", ja vēlaties izdzēst visus datus un\n"
-"sadaļas, kas atrodas uz šī cietā diska. Esiet uzmanīgi, pēc \"Labi\" "
-"nospiešanas jūs nevarēsit atjaunot nekādus datus vai sadaļas, kas atradās\n"
-"uz diska, tajā skaitā arī Windows datus.\n"
-"\n"
-"Nospiediet \"Atcelt\", lai atceltu šo operāciju bez jebkādu uz šī diska "
-"esošu datu vai sadaļu pazaudēšanas."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Norādiet cieto disku, ko vēlaties izdzēst, lai izveidotu jaunu\n"
-"Mandrake Linux sadaļu. Esiet uzmanīgi, jo visi diskā esošie dati\n"
-"pazudīs un nebūs atjaunojami."
+msgid "USA (broadcast)"
+msgstr "USA (broadcast)"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
 msgstr ""
+"Lūdzu, izvēlieties\n"
+"mēdiju dublēšanai."
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+msgid "Use Xinerama extension"
+msgstr "Lietot Xinerama piebūvi"
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+msgid "Loopback"
+msgstr "Loopback"
 
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
 msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
 msgstr ""
+"Nevar pareizi aizvērt mkbootdisk: \n"
+" %s \n"
+" %s"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX mēģinās sameklēt PCI SCSI adapteri(us).\n"
-"Ja DrakX atradīs kādu SCSI adapteri un zinās, kuru draiveri izmantot,\n"
-"tas tiks instalēts automātiski.\n"
-"\n"
-"Ja jums nav SCSI adapteru, ir ISA SCSI adapteris vai PCI SCSI adapteris,\n"
-"ko DrakX neatpazīst, jums tiks pajautāts, vai jūsu sistēmā ir SCSI\n"
-"adapteris. Ja nav SCSI adapteru, jūs varat vienkārši izvēlēties 'Nē'.\n"
-"Ja jūs izvēlaties 'Jā', jums tiks parādīts draiveru saraksts, kurā\n"
-"varat izvēlēties vajadzīgo adapteri.\n"
-"\n"
-"\n"
-"Ja jums nepieciešams patstāvīgi norādīt adapteri, DrakX pajautās, vai\n"
-"vēlaties norādīt adaptera opcijas. Jums būtu jāļauj DrakX aptaujāt\n"
-"dzelžus un noskaidrot opcijas. Parasti tas izdodas bez problēmām.\n"
-"\n"
-"Ja neizdodas, jums patstāvīgi jānorāda draivera opcijas.\n"
-"Izlasiet Instalēšanas rokasgrāmatu (3. nodaļu, apakšnodaļu \"Informācijas "
-"savākšana par jūsu dzelžiem\"), lai uzzinātu, kā iegūt šo\n"
-"informāciju no dzelžu dokumentācijas, ražotāja tīkla lapas\n"
-"(ja jums ir pieejams Internets) vai Windows (ja tas ir uzstādīts jūsu "
-"datorā)."
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "West Europe"
+msgstr "Rietumeiropa"
 
-#: ../../help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
 "\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "HardDrake2 versija %s"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (the LInux LOader) un Grub ir sāknētāji: tie spēj sāknēt GNU/Linux\n"
-"vai jebkuru citu operētājsistēmu, kas ir uzstādīta jūsu datorā.\n"
-"Parasti citas operētājsistēmas tiek korekti noteiktas un instalētas.\n"
-"Ja tā nenotiek, jūs šajā ekrānā varat patstāvīgi pievienot ierakstu. Esiet\n"
-"uzmanīgs, izvēloties pareizus parametrus.\n"
-"\n"
-"\n"
-"Jūs varbūt arī vēlaties neļaut nevienam piekļūt pārējām operētājsistēmām,\n"
-"un šajā gadījumā jūs varat izdzēst attiecīgos ierakstus. Bet šajā\n"
-"gadījumā jums būs nepieciešama sāknēšanas diskete, lai tās sāknētu!"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
+msgstr "Kopēju %s"
 
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "Izvēlieties krāsu"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "Dominican Republic"
+msgstr "Dominikas Republika"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Lūdzu izvēlieties pareizu portu. Piemēram, MS Windows\n"
-"ports COM1 GNU/Linux vidē saucas ttyS0."
+msgid "Swaziland"
+msgstr "Svazilenda"
 
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+msgid "Set-UID"
+msgstr "Set-UID"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
+msgid "Please check if you are using CDRW media"
+msgstr "Lūdzu atzīmējiet, ja lietojat CDRW mēdiju"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
 msgstr ""
-"Parasti DrakX izvēlas tastatūras izkārtojumu priekš Jums (atkarībā no\n"
-"valodas, kuru Jūs izvēlējāties), tomēr Jums var nebūt tastatūra, kas "
-"atbilst\n"
-"tieši Jūsu valodai.\n"
-"ŠEIT DERĒTU KĀDS PIEMĒRS SAISTĪBĀ \n"
-"AR LATVIEŠIEM :)\n"
-"Klikšķiniet uz pogas \"Vairāk\" lai saņemtu pilnu sarakstu ar atbalstītiem\n"
-"tastatūras izkārtojumiem.\n"
-"\n"
-"Ja Jūs izvēlēsieties tastatūras izkārtojumu, kas balstās uz savādāku, kā\n"
-"latīņu alfabētu, nākamajā dialogā jums tiks pieprasīts izvēlēties taustiņa\n"
-"piesaisti, kas pārslēgs tastatūras izkārtojumu starp latīņu un ne-latīņu\n"
-"izkārtojumiem."
+"Norādiet cieto disku, ko vēlaties izdzēst, lai izveidotu jaunu\n"
+"Mandrake Linux sadaļu. Esiet uzmanīgi, jo visi diskā esošie dati\n"
+"pazudīs un nebūs atjaunojami."
 
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " on parallel port \\#%s"
+msgstr " uz paralelā porta \\/*%s"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Izmantojiet taustinus %c un %c, lai izveeleetos vajadziigo ierakstu."
 
-#: ../../help.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Parasta 2 pogu pele"
 
-#: ../../help.pm:1
+#: ../../lvm.pm:1
 #, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Uz jūsu cietā diska ir atrasta vairāk nekā viena Microsoft Windows sadaļa.\n"
-"Lūdzu izvēlieties to sadaļu, kuras izmēru jūs vēlaties izmainīt, lai\n"
-"instalētu jauno Mandrake Linux operētājsistēmu.\n"
-"\n"
-"\n"
-"Jūsu zināšanai, katra sadaļa ir uzskaitīta šādā veidā: \"Linux nosaukums\",\n"
-"\"Windows nosaukums\" \"Izmērs\".\n"
-"\n"
-"\"Linux nosaukums\" ir kodēts šādi: \"cietā diska tips\", \"cietā diska\n"
-"numurs\", \"sadaļas numurs\" (piemēram, \"hda1\").\n"
-"\n"
-"\n"
-"\"Cietā diska tips\" ir \"hd\", ja jūsu cietais disks ir IDE disks, \"sd\",\n"
-"ja tas ir SCSI cietais disks.\n"
-"\n"
-"\n"
-"\"Cietā diska numurs\" vienmēr ir burts pēc \"hd\" vai \"sd\". IDE diskiem:\n"
-"\n"
-"   * \"a\" nozīmē \"primārā IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"b\" nozīmē \"primārā IDE konytroliera pakārtotais disks\",\n"
-"\n"
-"   * \"c\" nozīmē \"sekundārā IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"d\" nozīmē \"sekundārā IDE kontroliera pakārtotais disks\".\n"
-"\n"
-"\n"
-"SCSI diskiem \"a\" nozīmē \"primārais cietais disks\", \"b\" nozīmē\n"
-" \"sekundārais cietais disks\", utt...\n"
-"\n"
-"\"Windows nosaukums\" ir jūsu cietā diska burts Windows vidē (pirmais disks\n"
-"vai sadaļa saucas \"C:\")."
+msgid "Remove the logical volumes first\n"
+msgstr "Vispirms noņemiet loģiskos sējumus\n"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Pašlaik jums ir jāizvēlas, kurā(s) diska sadaļā(s) instalēt Mandrake Linux\n"
-"operētājsistēmu. Ja sadaļas jau ir izveidotas (agrākas GNU/Linux "
-"instalēšanas\n"
-"laikā vai ar citu diska sadalīšanas rīku), jūs varat izmantot esošās "
-"sadaļas.\n"
-"Citos gadījumos ir jāveido jaunas diska sadaļas.\n"
-"\n"
-"\n"
-"Lai veidotu sadaļas, jums vispirms ir jāizvēlas cietais disks. Jūs varat\n"
-"norādīt sadalāmo disku, noklikšķinot uz \"hda\" pirmajam IDE diskam,\n"
-"\"hdb\" - otrajam diskam, \"sda\" - pirmajam SCSI diskam, utt.\n"
-"\n"
-"\n"
-"Lai sadalītu izvēlēto cieto disku, varat izmantot sekojošas opcijas:\n"
-"\n"
-"   * Izdzēst visu: šī opcija izdzēš visas sadaļas, kas atrodas uz izvēlētā "
-"cietā diska.\n"
-"\n"
-"\n"
-"   * Izvietot automātiski: šī opcija ļauj jums automātiski izveidot Ext2 un "
-"swap sadaļas jūsu cietā diska\n"
-"     brīvajā vietā.\n"
-"\n"
-"\n"
-"   * Salabot sadaļu tabulu: ja sadaļu tabula ir bojāta, jūs varat mēģināt to "
-"autjaunot, izmantojot šo opciju.\n"
-"     Esiet uzmanīgi un atcerieties, ka tas var neizdoties.\n"
-"\n"
-"\n"
-"   * Atsaukt: jūs varat izmantot šo opciju, lai atceltu izmaiņas.\n"
-"\n"
-"\n"
-"   * Pārlādēt: jūs varat izmantot šo opciju, ja vēlaties atsaukt visas "
-"izmaiņas un ielādēt sākotnējo sadaļu tabulu.\n"
-"\n"
-"\n"
-"   * Meistars: Ja cietā diska sadalīšanai vēlaties izmantot meistaru, varat "
-"lietot šo opciju. Tā ir ieteicama,\n"
-"     ja jums nav labu zināšanu par diska sadalīšanu.\n"
-"\n"
-"\n"
-"   * Atjaunot no disketes: ja iepriekšējās instalēšanas laikā saglabājāt "
-"sadaļu tabulu disketē, jūs varat\n"
-"     to atjaunot, izmantojot šo opciju.\n"
-"\n"
-"\n"
-"   * Saglabāt disketē: ja vēlaties sadaļu tabulu saglabāt disketē, lai "
-"varētu to atjaunot, izmantojiet šo\n"
-"     opciju. Ir ļoti ieteicams izmantot šo opciju.\n"
-"\n"
-"\n"
-"   * Izdarīts: kad esat pabeiguši cietā diska dalīšanu, izmantojiet šo "
-"opciju, lai saglabātu izmaiņas.\n"
-"\n"
-"\n"
-"Jūsu zināšanai, jebkuru opciju var izsaukt ar tastatūru: pārvietojieties "
-"starp sadaļām, izmantojot Tab un Aušup/Lejup bultiņas.\n"
-"\n"
-"\n"
-"Kad ir izvēlēta sadaļa, jūs varat izmantot:\n"
-"\n"
-"           * Ctrl-c, lai izveidotu jaunu sadaļu (kad ir izvēlēta tukša "
-"sadaļa)\n"
-"\n"
-"           * Ctrl-d, lai izdzēstu sadaļu\n"
-"\n"
-"           * Ctrl-m, lai uzstādītu montēšanas punktu"
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Izdaliitais ieraksts tiks saakneets peec %d sekundeem."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakboot:1
+#, c-format
 msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
-"Šobrīd ir laiks izvēlēties nepieciešamo datora drošības līmeni.\n"
-"XXXXX jo dators ir atklātāks, un jo kritiskāki ir uz tā novietotie dati,\n"
-"jo augstākam vajadzētu būt drošības līmenim.\n"
-"Taču augstāks drošības līmenis tiek iegūts uz lietošanas ērtuma\n"
-"rēķina. Meklējiet nodaļu \"msec\" rokasgrāmatā ``Reference Manual'',\n"
-"lai iegūtu vairāk informācijas par šo līmeņu nozīmi.\n"
-"\n"
-"Ja Jūs neziniat, ko izvēlēties, atstājiet noklusēto opciju."
+"Nav iespējams rakstīt /etc/sysconfig/bootsplash\n"
+"Fails nav atrasts."
 
-#: ../../help.pm:1
+#
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
+msgid "Internet access"
+msgstr "Interneta pieeja"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
 msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
 msgstr ""
-"Visas jaunizveidotās sadaļas ir jāformatē, pirms tās var izmantot\n"
-"(formatēšana nozīmē failsistēmas izveidošanu).\n"
-"\n"
-"Tagad jūs arī varat izvēlēties pārformatēt dažas jau esošas sadaļas, lai\n"
-"izdzēstu tajās esošo informāciju. Ja jūs vēlaties to darīt, norādiet\n"
-"sadaļas, kuras vēlaties formatēt.\n"
-"\n"
-"Ņemiet vērā, ka nav nepieciešams pārformatēt visas jau eksistējošas "
-"sadaļas.\n"
-"Jums ir jāformatē sadaļas, kurās atrodas operētājsistēma (piemēram, \"/\",\n"
-"\"/usr\" vai \"/var\"), bet nav jāformatē sadaļas, kurās atrodas dati, ko\n"
-"jūs vēlaties saglabāt (parasti /home).\n"
-"\n"
-"Esiet uzmanīgi, izvēloties sadaļas, jo pēc formatēšanas visi dati būs\n"
-"iznīcināti un jūs vairs nevarēsit tos atjaunot.\n"
-"\n"
-"Noklikšķiniet \"Labi\", kad esat gatavi formatēt sadaļas.\n"
-"\n"
-"Noklikšķiniet \"Atcelt\", ja jūs gribat izvēlēties citas sadaļas, kur\n"
-"instalēt jauno Mandrake Linux operētājsistēmu."
+"teksta laukuma y koordināte,\n"
+"simbolu skaits"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
 msgstr ""
+"Lai saņemtu patreizējam printerim pieejamo opciju sarakstu, klikšķiniet uz "
+"\"Drukāšanas opciju saraksts\" pogas."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Atļauju serverus..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Tiek drukāta(s) izmēģinājuma lapa(s)..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Jau eksistē sadaļa ar montēšanas punktu %s\n"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
@@ -1959,51 +1823,49 @@ msgid ""
 "\n"
 "Depending on your hard drive configuration, several options are available:\n"
 "\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
 "\n"
 "   Before choosing this option, please understand that after this\n"
 "procedure, the size of your Microsoft Windows partition will be smaller\n"
 "then when you started. You will have less free space under Microsoft\n"
 "Windows to store your data or to install new software.\n"
 "\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be deleted. !!\n"
 "\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
 msgstr ""
 "Pašlaik jums ir jāizvēlas, kur uz cietā diska instalēt Mandrake Linux\n"
 "operētājsistēmu. Ja disks ir tukšs vai cita operētājsistēma aizņem visu\n"
@@ -2067,188 +1929,121 @@ msgstr ""
 "bīstams. Jūs varat pazaudēt\n"
 "  visus datus, tāpēc izvēlieties tikai tad, ja zinat, ko darāt."
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Visbeidzot, Jums tiks uzdots jautājums vai Jūs vēlaties grafisko saskarni\n"
-"pie ielādes. Šis jautājums tiks Jums uzdots, pat ja Jūs neizvēlējāties\n"
-"pārbaudīt konfigurāciju. Acīmredzot, Jūs vēlaties atbildet \"Nē\" ja šis\n"
-"dators darbosies kā serveris, vai arī neizdevās veiksmīgi paveikt ekrāna\n"
-"konfigurēšanu."
+msgid "Ukraine"
+msgstr "Ukraina"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "Application:"
+msgstr "Aplikācija:"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "External ISDN modem"
+msgstr "Ārējs ISDN modēms"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "Your choice? (default %s) "
+msgstr "Jūsu izvēle? (noklusēti %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid " / Region"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
 "\n"
 "\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
 "\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
 "\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
 "\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
 "\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
 "\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
 msgstr ""
+"Izmēģinājuma lapa(s) ir nosūtīta(s) printerim.\n"
+"Var paiet zināms laiks, pirms printeris sāk drukāt.\n"
+"Drukāšanas stāvoklis:\n"
+"%s\n"
+"\n"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
+msgid "daily"
+msgstr "ik dienu"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid "and one unknown printer"
 msgstr ""
-"Tagad varat norādīt servisus, kurus jūs vēlaties startēt sistēmas\n"
-"palaišanas laikā.\n"
-"\n"
-"\n"
-"Kad pele pārvietojas pār saraksta elementu, parādās\n"
-"neliels palīdzības balons, kas paskaidro servisa lomu.\n"
-"\n"
 "\n"
-"Esiet īpaši uzmanīgs šajā solī, ja vēlaties sistēmu izmantot ka serveri:\n"
-"iespējams, ka nevēlaties startēt nevienu nevajadzīgu servisu. Atcerieties.\n"
-"ka daži servisi var būt bīstami, ja darbojas serverī.\n"
-"Parasti izvēlieties tikai tos servisus, kas jums tiešām nepieciešami."
+"un viens nezināms printeris ir"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "Īrija"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "kodola versija"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "         Restore Configuration       "
+msgstr "         Atjaunot konfigurāciju       "
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Vai tas ir pareizi?"
 
 #: ../../help.pm:1
 #, c-format
 msgid ""
 "You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
 "\n"
 "When configuring your network, the available connections options are:\n"
 "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2263,5901 +2058,6283 @@ msgid ""
 "installed and use the program described there to configure your connection."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Wizard Configuration"
+msgstr "Meistara konfigurācija"
 
-#: ../../help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
+msgid "Autoprobe"
+msgstr "Aptaujāt"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linux instalācija ir sadalīta pa dažiem CD-ROM diskiem. DrakX\n"
-"zin, vai izvēlētā pakotne atrodas uz cita CD-ROM diska, izvirzīs pašreizējo\n"
-"kompaktdisku un palūgs ievietot citu pēc nepieciešamības."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup system files..."
+msgstr "Dublēt sistēmas failus..."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Augstāk ir uzskaitītas eksistējošās Linux sadaļas, kas ir atrastas uz jūsu\n"
-"cietā diska. Jūs varat atstāt meistara izdarīto izvēli, jo tā ir laba\n"
-"parastām vajadzībām. Ja jūs izmaināt šo izvēli, jums ir jādefinē vismaz\n"
-"saknes sadaļā(\"/\"). Neizvēlieties pārāk mazu sadaļu, citādi jūs nevarēsit\n"
-"instalēt visas vajadzīgās programmas. Ja vēlaties datus glabāt atsevišķā\n"
-"sadaļā, jums ir jānorāda arī \"/home\" (to var izdarīt tikai tad, ja jums "
-"ir\n"
-"vairākas Linux sadaļas).\n"
-"\n"
-"Jūsu zināšanai, katra sadaļa ir uzskaitīta šādā veidā: \"Nosaukums\", "
-"\"Izmērs\".\n"
-"\n"
-"\"Nosaukums\" ir kodēts šādi: \"cietā diska tips\", \"cietā diska numurs\",\n"
-"\"sadaļas numurs\" (piemēram, \"hda1\").\n"
-"\n"
-"\"Cietā diska tips\" ir \"hd\", ja jūsu cietais disks ir IDE disks, \"sd\",\n"
-"ja tas ir SCSI cietais disks.\n"
-"\n"
-"\"Cietā diska numurs\" vienmēr ir burts pēc \"hd\" vai \"sd\". IDE diskiem:\n"
-"\n"
-"   * \"a\" nozīmē \"primārā IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"b\" nozīmē \"primārā IDE konytroliera pakārtotais disks\",\n"
-"\n"
-"   * \"c\" nozīmē \"sekundārā IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"d\" nozīmē \"sekundārā IDE kontroliera pakārtotais disks\".\n"
-"\n"
-"SCSI diskiem \"a\" nozīmē \"primārais cietais disks\", \"b\" nozīmē\n"
-" \"sekundārais cietais disks\", utt..."
+#: ../../install_any.pm:1
+#, c-format
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Neva izmantot apraidi bez NIS domēna"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Noņemu printeri \"%s\"..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
 "\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
 msgstr ""
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "information level that can be obtained through the cpuid instruction"
 msgstr ""
-"Pirms turpināt, Jums vajadzētu uzmanīgi izlasīt licences vienošanos. Tā "
-"nosedz\n"
-"visu Mandrake Linux distribūciju, un ja Jūs nepiekrītat visiem noteikumiem,\n"
-"nospiediet uz pogas \"Noraidīt\", kas nekavējoties pārtrauks instalāciju. "
-"Lai turpinātu\n"
-"instalācijas procesu, nospiediet pogu \"Pieņemt\"."
 
-#: ../../install2.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You must also format %s"
-msgstr "Jums ir jāformatē arī %s"
+msgid "Peru"
+msgstr "Peru"
 
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nevar piekļūt kodola moduļiem, atbilstošiem Jūsu kodolam (fails %s nav "
-"atrodams), parasti tas nozīmē, ka ielādes diskete nav sinhronizēta ar "
-"instalācijas datu nesēju (lūdzu izveidojiet jaunāku ielādes disketi)"
+msgid " on device: %s"
+msgstr " uz iekārtas: %s"
 
-#: ../../install_any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Atklāta kļūda - nav atrasta neviena ierīce, kas derētu jaunu failsistēmu "
-"veidošanai. Lūdzu pārbaudiet dzelžus, lai noskaidrotu problēmas iemeslu"
+msgid "Remove Windows(TM)"
+msgstr "Noņemt Windows(TM)"
 
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Error reading file %s"
-msgstr "Kļūda, nolasot failu %s"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Startē X fontu serveri (obligāti, lai izpildītu XFree)."
 
-#: ../../install_any.pm:1
-#, c-format
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
 msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
 msgstr ""
-"Lai izmantotu šo saglabāto pakotņu izvēli, palaidiet instalāciju ar ``linux "
-"defcfg=floppy''"
+"Lielākā daļa no šīm vērtībām tika paņemtas\n"
+"no strādājošas sistēmas. Jūs varat izmainīt tās pēc vajadzības"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Šī diskete nav FAT formatēta"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Atzīmējiet fonta failu vai direktoriju un klikšķiniet uz \"Pievienot\""
 
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ielieciet FAT formatētu disketi iekārtā %s"
+msgid "Madagascar"
+msgstr "Madagaskāra"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Neva izmantot apraidi bez NIS domēna"
+msgid "Urpmi"
+msgstr "Urpmi"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Sekojošas pakotnes tiks noņemtas, lai varētu uzlabot Jūsu sistēmu: %s\n"
-"\n"
-"\n"
-"Vai tiešām vēlaties noņemt šīs pakotnes?\n"
+msgid "Cron not available yet as non-root"
+msgstr "Cron vēl nav pieejams citiem lietotājiem, kā root"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No"
-msgstr "Nē"
+msgid "System"
+msgstr "Sistēma"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "Vai vēlaties izmantot aboot?"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Yes"
-msgstr "Jā"
+msgid "Arabic"
+msgstr ""
 
-#: ../../install_any.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
 msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
 "\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+"- Options:\n"
 msgstr ""
-"Jūs izvēlējāties sekojošu(s) serveri(us): %s\n"
-"\n"
 "\n"
-"Šie serveri tiek aktivizēti pēc noklusēšanas. Tiem nav nekādu zināmu "
-"drošības\n"
-"trūkumu, bet var tikt atrasti kādi jauni. Tādā gadījumā Jums noteikti tie "
-"jāuzlabo\n"
-"pēc iespējas ātrāk.\n"
-"\n"
-"\n"
-"Vai tiešām vēlaties instalēt šos serverus?\n"
+"- Opcijas:\n"
 
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "trauksmes konfigurācija"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Password required"
+msgstr "Nepieciešama parole"
 
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO instalēšana"
+#: ../../common.pm:1
+#, c-format
+msgid "%d minutes"
+msgstr "%d minūtes"
 
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Bringing down the network"
-msgstr "Atslēdzu tīklu"
+msgid "Graphics card: %s"
+msgstr "Grafiskā karte: %s"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bringing up the network"
-msgstr "Iedarbinu tīklu"
+msgid "WebDAV transfer failed!"
+msgstr "WebDAV pārvietošana neizdevās!"
 
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Partitioning failed: %s"
-msgstr "Diska sadalīšana neizdevās: %s"
+msgid "XFree configuration"
+msgstr "XFree konfigurācija"
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX sadaļu veidošanas meistars atrada sekojošus risinājumus:"
+msgid "Choose action"
+msgstr "Izvēlieties darbību"
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "I can't find any room for installing"
-msgstr "Nevaru atrast vietu instalēšanai"
+msgid "French Polynesia"
+msgstr "Franču Polinēzija"
 
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
 msgstr ""
-"Tagad jūs varat sadalīt diska iekārtu %s.\n"
-"Kad esat pabeiguši, neaizmirstiet saglabāt, izmantojot `w'"
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Use fdisk"
-msgstr "Izmantot fdisk"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Atbalsta OKI 4w un savietojamus winprinterus."
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Custom disk partitioning"
-msgstr "Pielāgots disku sadalījums"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Palaist ALSA (Advanced Linux Sound Architecture) skaņu sistēmu"
 
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VISAS diska %s sadaļas un tajās esošie dati tiks pazaudēti"
+msgid "Installing driver for %s card %s"
+msgstr "Instalēju draiveri %s kartei %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Jums ir vairāk nekā viens cietais disks, uz kura jūs instalējat linux?"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Jūs pārlikāt savu iepriekš noklusēto printeri (\"%s\"), vai tam jābūt "
+"noklusētajam printerim arī zem jaunās drukāšanas sistēmas %s?"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Erase entire disk"
-msgstr "Izdzēst visu disku"
+msgid "Enable Server"
+msgstr "Atļaut serveri"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Remove Windows(TM)"
-msgstr "Noņemt Windows(TM)"
+msgid "Ukrainian"
+msgstr "Ukrainas"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
 msgstr ""
-"Nav FAT sadaļu, lai izmainīto to izmēru vai izmantotu kā loopback (vai "
-"nepietiek brīvas vietas)"
+"Tīkla piekļuve nebija palaista un nevar tikt iesākta. Lūdzu, pārbaudiet "
+"konfigurāciju un aparatūru. Tad mēģiniet konfigurēt attālināto printeri "
+"vēlreiz."
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Lūdzu ievietojiet Startēšnas disketi iekārtā %s"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "Lokālā tīkla adrese"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Noņemt Windows(TM)"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
 msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
 msgstr ""
+"Jūsu %s skeneris ir nokonfigurēts.\n"
+"Jūs tagad varat skenēt dokumentus, izmantojot ``XSane'' no Multimēdiji/"
+"Grafika aplikāciju izvēlnē."
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT izmēra maiņa neizdevās: %s"
+msgid "Firewire controllers"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"LILO (the LInux LOader) un Grub ir sāknētāji: tie spēj sāknēt GNU/Linux\n"
+"vai jebkuru citu operētājsistēmu, kas ir uzstādīta jūsu datorā.\n"
+"Parasti citas operētājsistēmas tiek korekti noteiktas un instalētas.\n"
+"Ja tā nenotiek, jūs šajā ekrānā varat patstāvīgi pievienot ierakstu. Esiet\n"
+"uzmanīgs, izvēloties pareizus parametrus.\n"
+"\n"
+"\n"
+"Jūs varbūt arī vēlaties neļaut nevienam piekļūt pārējām operētājsistēmām,\n"
+"un šajā gadījumā jūs varat izdzēst attiecīgos ierakstus. Bet šajā\n"
+"gadījumā jums būs nepieciešama sāknēšanas diskete, lai tās sāknētu!"
+
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "Mainu Windows sadaļas izmēru"
+msgid "System mode"
+msgstr "Sistēmas režīms"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Resizing"
-msgstr "Mainu izmēru"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"Lai drukātu ar NetWare printeri, jums jānorāda NetWare printera servera "
+"vārds (Piezīme! tas var atšķirties no servera TCP/IP hosta nosaukuma!), kā "
+"arī jūsu izvēlētā printera rindas nosaukums un jebkurš derīgs lietotāja "
+"vārds un parole."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Tīkla maska"
+
+#: ../../any.pm:1
 #, c-format
-msgid "partition %s"
-msgstr "sadaļa %s"
+msgid "Append"
+msgstr "Papildināt"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Kādu apjomu vēlaties atstāt priekš windows uz"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Atsvaidzināt printeru sarakstu (lai parādītu visus attāli pieejamos CUPS "
+"printerus)"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"WARNING!\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
 "\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"BRĪDINĀJUMS!\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
 "\n"
-"Tagad DrakX izmainīs Windows sadaļas izmēru. Esiet\n"
-"uzmanīgs: šī darbība ir bīstama. Ja jūs to vēl neesat\n"
-"izdarījis, jums vispirms ir jāpārtrauc instalēšana, no\n"
-"Windows jāpalaiž scandisk (ieteicams palaist arī defrag),\n"
-"tad atkārtoti jāsāk instalēšana. Vajadzētu izveidot arī\n"
-"datu rezerves kopiju. Kad esat pārliecināts, nospiediet Labi."
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
 msgstr ""
-"Windows sadaļa ir pārāk fragmentēta. Vispirms no Windows vides palaidiet "
-"``defrag'' un tad atsāciet Mandrake Linux instalēšanu."
 
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Izmantot Windows sadaļas brīvo vietu"
-
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
 msgstr ""
-"FAT izmēra mainītājs nespēj izmainīt jūsu sadaļu,\n"
-"atklāta sekojoša kļūda: %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Kuras sadaļas izmēru vēlaties izmainīt?"
+msgid "Network printer \"%s\", port %s"
+msgstr "Tīkla printeris \"%s\", ports %s"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Izmantot Windows sadaļas brīvo vietu"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
 msgstr ""
-"Nav FAT sadaļu, lai izmainīto to izmēru vai izmantotu kā loopback (vai "
-"nepietiek brīvas vietas)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Swap sadaļas izmērs (MB): "
+"Lūdzu izvēlieties, kurš tīkla adapteris būs pievienots jūsu lokālajam "
+"datortīklam."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Root partition size in MB: "
-msgstr "Saknes sadaļas izmērs (MB): "
+msgid "OK to restore the other files."
+msgstr "OK lai atjaunotu citus failus."
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Choose the sizes"
-msgstr "Izvēlieties izmērus"
+msgid "Please choose your keyboard layout."
+msgstr "Lūdzu izvēlieties jūsu tastatūras izkārtojumu."
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kuru sadaļu vēlaties izmantot priekš Linux4Win?"
+msgid "Printer Device URI"
+msgstr "Printera ierīces URI"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Izmantot Windows sadaļu priekš loopback"
+msgid "Not erasable media!"
+msgstr "Nav dzēšams datu nesējs!"
 
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "There is no existing partition to use"
-msgstr "Nav nevienas sadaļas, ko varētu izmantot"
+msgid "Terminal-based"
+msgstr "Izmantojot termināli"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use existing partitions"
-msgstr "Izmantot jau esošu sadaļu"
+msgid "Installing a printing system in the %s security level"
+msgstr "Instalēju drukāšanas sistēmu %s drošības līmenī"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nepietiek brīvas vietas, lai izvietotu jaunas sadaļas"
+msgid "The user name is too long"
+msgstr "Lietotāja vārds ir pārāk garš"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use free space"
-msgstr "Izmantot brīvo vietu"
+msgid "Other OS (windows...)"
+msgstr "Cita OS (windows...)"
 
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Jums ir nepieciešama /boot/efi montēta FAT sadaļa"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "WebDAV remote site already in sync!"
+msgstr "WebDAV attālinātā vieta jau sinhronizēta!"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Jums nav swap sadaļas\n"
-"\n"
-"Vai tomēr turpināt?"
+msgid "Reading printer database..."
+msgstr "Nolasu printeru datubāzi..."
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Jums ir nepieciešama saknes sadaļa.\n"
-"Šim nolūkam izveidojiet sadaļu (vai uzklikšķiniet uz jau esošas).\n"
-"Tad izvēlieties darbību ``Montēšanas punkts'' un norādiet, ka tas ir `/'"
+msgid "Generate auto install floppy"
+msgstr "Sagatavot auto instalēšanas disketi"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
 msgstr ""
-"Dažu jūsu datora dzelžu darbībai nepieciešami ``firmas'' draiveri.\n"
-"Papildus informāciju varat atrast šeit: %s"
+"\t\t lietotāja vārds: %s\n"
+"\t\t ceļš: %s \n"
 
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Apsveicam, instalēšana ir pabeigta.\n"
-"Izņemiet sāknēšanas datu nesēju un nospiediet ievadu, lai pārstartētu "
-"datoru.\n"
-"\n"
-"\n"
-"Lai saņemtu informāciju par labojumiem, kas ir pieejami šim Mandrake Linux\n"
-"izdevumam, skatiet Errata failu, kas atrodams\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Informācija par jūsu sistēmas konfigurēšanu ir pieejama Oficiālās\n"
-"Mandrake Linux rokasgrāmatas pēcinstalēšanas nodaļā."
+msgid "Somalia"
+msgstr "Somālija"
 
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+msgid "No open source driver"
+msgstr "Nav zināmu draiveru"
 
-#: ../../install_messages.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
 msgstr ""
-"\n"
-"Brīdinājums\n"
-"\n"
-"Lūdzu rūpīgi izlasiet zemāk esošos nosacījumus. Ja jūs nepiekrītat kādai\n"
-"to daļai, jūs nedrīkstat instalēt no šī CD. Nospiediet 'Noraidīt', lai\n"
-"turpinātu instalēšanu, neizmantojot šo datu nesēju.\n"
-"\n"
-"\n"
-"Daži šajā CD datu nesējā esošie komponenti nav pakļauti GPL licencei vai\n"
-"līdzīgiem līgumiem. Katra šāda komponenta izmantošanu nosaka atsevišķas\n"
-"licences noteikumi un nosacījumi. Lūdzu rūpīgi to izlasiet un ievērojiet\n"
-"tās nosacījumus, pirms izmantot vai izplatīt uzskaitītos komponentus.\n"
-"Šīs licences pārsvarā aizliegs jums pārsūtīt, dublēt (izņemot rezerves\n"
-"kopēšanas nolūkus), izplatīt tālāk, reversi uzbūvēt, de-asamblēt,\n"
-"de-kompilēt vai modificēt šo kompomentu. Jebkurš šīs vienošanās pārkāpums\n"
-"jums automātiski atņems tiesības, ko piešķīrusi attiecīgā licence. Izņemot\n"
-"gadījumus, kad konkrētas licences nosacījumi jums dod šādas tiesības, jūs\n"
-"parasti nedrīkstat instalēt šādu programmu uz vairāk, kā vienas sistēmas\n"
-"vai pielāgot to izmantošanai tīklā. Ja šaubaties, lūdzu sazinieties ar\n"
-"komponenta izplatītāju vai redaktoru.\n"
-"Šādu komponentu, tajā skaitā arī iekļautās dokumentācijas, nodošana\n"
-"trešajām personām vai kopēšana parasti ir aizliegta.\n"
-"\n"
-"\n"
-"Visas nākamajā CD datu nesējā iekļauto komponentu tiesības pieder to\n"
-"attiecīgajiem autoriem, un tās aizsargā intelektuālā īpašuma un\n"
-"autortiesību likumi, kas attiecas uz programnodrošinājumu.\n"
+"Šis ir līdzīgs iepriekšējam līmenim, bet sistēma ir pilnībā slēgta un "
+"drošības iespējas ir pašas maksimālākās."
 
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
+msgid "Nicaragua"
+msgstr "Nikaragva"
 
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Entering step `%s'\n"
-msgstr "Uzsāku soli `%s'\n"
+msgid "New Caledonia"
+msgstr "Jaunkaledonija"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Help"
-msgstr "Palīdzība"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "not configured"
-msgstr "pārkonfigurēt"
+msgid "European protocol (EDSS1)"
+msgstr "Eiropas protokols (EDSS1)"
 
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
-msgid "Configure"
-msgstr "Konfigurēt"
+msgid "Video mode"
+msgstr "Video režīms"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Go on anyway?"
-msgstr "Tomēr turpināt?"
+msgid "Please enter your email address below "
+msgstr "Lūdzu zemāk ievadiet savu epasta adresi"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "There was an error installing packages:"
-msgstr "Pakotņu instalēšanas laikā atklāta kļūda:"
+msgid "Oman"
+msgstr "Omāna"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Pakotņu kārtošanas laikā atklāta kļūda:"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Tīkla konfigurācija"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Nomainiet Cd-Rom!\n"
-"\n"
-"Lūdzu ielieciet iekārtā Cd-Rom \"%s\", kad tas ir izdarīts, nospiediet Labi\n"
-"Ja jums nav šī diska, nospiediet Atcelt, lai neinstalētu no šī Cd-Rom."
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Refuse"
-msgstr "Noraidīt"
+msgid "New size in MB: "
+msgstr "Jauns izmērs MB: "
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Accept"
-msgstr "Pieņemt"
+msgid "Partition table type: %s\n"
+msgstr "sadaļu tabulas tips: %s\n"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Installing package %s"
-msgstr "Instalēju pakotni %s"
+msgid "Authentication Windows Domain"
+msgstr "Windows Domain autentikācija"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "%d packages"
-msgstr "%d pakotnes"
-
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "Detaļas"
+msgid "US keyboard"
+msgstr "ASV tastatūra"
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Details"
-msgstr "Detaļas"
+msgid "Buttons emulation"
+msgstr "Pogu emulācija"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Lūdzu gaidiet, gatavoju instalāciju"
+msgid ", network printer \"%s\", port %s"
+msgstr ", tīkla printeris \"%s\", ports %s"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Time remaining "
-msgstr "Atlikušais laiks"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
+"\n"
+"Drakbackup aktivitātes caur tape:\n"
+"\n"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Estimating"
-msgstr "Aprēķinu"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+"FTP savienojuma problēma: nebija iespējams nosūtīt Jūsu dublēšanas failus pa "
+"FTP.\n"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Nosūtu failus..."
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Installing"
-msgstr "Instalēju"
+msgid "Halt bug"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "Izvēlieties pakotnes, ko vēlaties instalēt"
+msgid "Mail alert configuration"
+msgstr "Pasta trauksmes konfigurēšana"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Minimal install"
-msgstr "Minimāla instalēšana"
+msgid "Tokelau"
+msgstr "Tokelau salas"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Updating package selection"
-msgstr "Atjaunoju pakotņu izvēli"
+msgid "Bosnian"
+msgstr "Bosniešu"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Load/Save on floppy"
-msgstr "Ielādēt/saglabāt disketē"
+msgid "Release: "
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "<- Previous"
-msgstr "<- Atpakaļ"
+msgid "Connection speed"
+msgstr "Savienojuma ātrums"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Install"
-msgstr "Instalēt"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
+"Lūdzu ievadiet CD rakstītāja ierīces nosaukumu\n"
+"piemēram: 0,1,0"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Show automatically selected packages"
-msgstr "Parādīt automātiski izvēlētās pakotnes"
+msgid "Namibia"
+msgstr "Namībija"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Jūs nevarat atteikties no šīs pakotnes. To ir nepieciešams uzlabot"
+msgid "Database Server"
+msgstr "Datubāzu serveris"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+msgid "special capacities of the driver (burning ability and or DVD support)"
 msgstr ""
-"Šo pakotni ir nepieciešams uzlabot\n"
-"Vai tiešām vēlaties atteikties no tās?"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Jūs nevarat atteikties no šīs pakotnes. Tā jau ir instalēta"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Nevar pievienot sadaļu _formatētam_ RAID md%d"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Šī ir obligāta pakotne, no tās nevar atteikties"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Jūsu karte spēj nodrošināt 3D akselerāciju, bet tikai ar XFree %s,\n"
+"ŅEMIET VĒRĀ, KA TAS IR EKSPERIMENTĀLS ATBALSTS, KAS VAR UZKĀRT DATORU.\n"
+"Jūsu karti uztur XFree %s, kam var būt labāks 2D atbalsts."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "You can't select/unselect this package"
-msgstr "Jūs varat izvēlēties/atteikties no šīs pakotnes"
+msgid "Please wait, setting security options..."
+msgstr "Lūdzu uzgaidiet, uzstādu drošības parametrus..."
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Tiks noņemtas sekojošas pakotnes"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Nezināms|CPH05X (bt878) [daudz pārdevēju]"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "Tiks instalētas sekojošas pakotnes"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Palaist X-Window sistēmu sāknēšanas laikā"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Jūs nevarat izvēlēties šo pakotni, jo nepietiek vietas tās instalēšanai"
+msgid "hourly"
+msgstr "ik stundu"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Importance: %s\n"
-msgstr "Svarīgums: %s\n"
+msgid "          Successfuly Restored on %s       "
+msgstr "          veiksmīgi atjaunoti uz %s        "
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Size: %d KB\n"
-msgstr "Apjoms: %d KB\n"
+msgid "Making printer port available for CUPS..."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "Versija: %s\n"
+msgid "Antigua and Barbuda"
+msgstr "Antigva un Barbuda"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "Nosaukums: %s\n"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bad package"
-msgstr "Slikta pakotne"
+msgid "Spanish"
+msgstr "Spānijas"
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Other"
-msgstr "Cits"
+msgid "Start"
+msgstr "Startēt"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Kopējais izmērs: %d / %d MB"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Next ->"
-msgstr "Tālāk ->"
+msgid "Configuring applications..."
+msgstr "Konfigurēju aplikācijas..."
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Individual package selection"
-msgstr "Atsevišķu pakotņu izvēle"
+msgid "Normal modem connection"
+msgstr "Parasts modēma savienojums"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "Package Group Selection"
-msgstr "Pakotņu grupu izvēle"
+msgid "File Selection"
+msgstr "Failu izvēle"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
 msgstr ""
-"Jūsu sistēmai trūkst resursu. Mandrake Linux instalēšanas laikā var\n"
-"rasties problēmas. Ja tā notiek, varat pamēģināt teksta instalēšanu.\n"
-"Lai to izdarītu, nospiediet`F1', ka notiek ielāde no CDROM, tad ievadiet\n"
-"`text'."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "Save packages selection"
-msgstr "Saglabāt pakotņu izvēli"
+msgid "CUPS"
+msgstr "CUPS"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Automated"
-msgstr "Automātisks"
+msgid "Run config tool"
+msgstr "Izpildīt config rīku"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Replay"
-msgstr "Atkārtot"
+msgid "Bootloader installation"
+msgstr "Sāknētāja instalēšana"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
+msgid "Root partition size in MB: "
+msgstr "Saknes sadaļas izmērs (MB): "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Generate auto install floppy"
-msgstr "Sagatavot auto instalēšanas disketi"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Sakne"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Šī ir obligāta pakotne, no tās nevar atteikties"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "Etherboot ISO image is %s"
 msgstr ""
-"Daži soļi nav izpildīti.\n"
-"\n"
-"Vai tiešām vēlaties iziet tūlīt?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Creating auto install floppy..."
-msgstr "Sagatavoju auto instalēšanas disketi"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) ir domēnu vārdu serveris (DNS), kas tiek izmantots hostu "
+"vārdiem atbilstošo IP adrešu noskaidrošanai."
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ielieciet tukšu disketi iekārtā %s"
+msgid "Disconnect..."
+msgstr "Atvienoju..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid "Saint Lucia"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Sāknētāja instalēšana neizdevās. Atklāta šāda kļūda:"
+msgid "Report"
+msgstr "Ziņojums"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Installing bootloader"
-msgstr "Sāknētāja instalēšana"
+msgid "Palau"
+msgstr "Palau"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Kļūda, instalējot aboot, \n"
-"vai instalēt piespiedu kārtā pat tad, ja tiks iznīcināta pirmā sadaļa?"
+msgid "level"
+msgstr "līmenis"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Do you want to use aboot?"
-msgstr "Vai vēlaties izmantot aboot?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
 msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
 msgstr ""
-"Izskatās, ka Jums ir nezināmas izcelsmes dators,\n"
-"yaboot ielādētājs nedarbosies.\n"
-"Instalēšana turpināsies, bet Jums būs jāizmanto\n"
-"BootX, lai ielādētu datoru"
+"Visiem incidentiem sekos viens kvalificēts MandrakeSoft tehniskais eksperts."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Preparing bootloader..."
-msgstr "Sagatavoju sāknētāju"
+msgid "Package Group Selection"
+msgstr "Pakotņu grupu izvēle"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Domain Admin Password"
-msgstr "Domēna administratora parole"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Atjaunot, izmantojot tīkla protokolu: %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Domain Admin User Name"
-msgstr "Domēna administratora lietotāja vārds"
+msgid "You can configure each parameter of the module here."
+msgstr "Šeit Jūs varat konfigurēt katru moduļa parametru."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Windows Domain"
-msgstr "Windows domēns"
+msgid "Choose the resolution and the color depth"
+msgstr "Norādiet izšķirtspēju un krāsu dziļumu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Authentication Windows Domain"
-msgstr "Windows Domain autentikācija"
+msgid "Emulate third button?"
+msgstr "Vai emulēt trešo pogu?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
 msgstr ""
+"Jūs nevarat izveidot jaunu diska sadaļu\n"
+"(jo ir sasniegts maksimālais primāro sadaļu skaits).\n"
+"Vispims noņemiet kādu primāro sadaļu un izveidojiet paplašināto sadaļu."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "NIS Server"
-msgstr "NIS serveris"
+msgid "Mount"
+msgstr "Montēta"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "NIS Domain"
-msgstr "NIS domēns"
+msgid "Creating auto install floppy"
+msgstr "Creating auto install floppy"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "NIS autentikācija"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Sistēmas jauninājumu instalēšana"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "text box height"
+msgstr "teksta laukuma augstums"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "LDAP Server"
-msgstr "LDAP serveris"
+msgid "State"
+msgstr "Stāvoklis"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Be sure a media is present for the device %s"
+msgstr "Pārliecinieties ka datu nesējs %s ir vajadzīgajā vietā"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP autentikācija"
+msgid "Enable multiple profiles"
+msgstr "Atļaut multi profilus"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr "Šīs opcijas var dublēt un atjaunot visus failus /etc direktorijā.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Local files"
-msgstr "Lokālie faili"
+msgid "Local printer"
+msgstr "Lokāls printeris"
 
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Authentication"
-msgstr "Autentifikācija"
+msgid "Files Restored..."
+msgstr "Atjaunotie faili..."
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Šī parole ir pārāk vienkārša (jābūt vismaz %d simbolus garai)"
+msgid "Package selection"
+msgstr "Pakotņu izvēle"
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No password"
-msgstr "Bez paroles"
+msgid "Mauritania"
+msgstr "Maurīcija"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Set root password"
-msgstr "root paroles izvēle"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
 msgstr ""
+"Lokālais printeris netika atrasts! Lai manuāli instalētu printeri, ievadiet "
+"ierīces/faila vārdu ievades rindā (Paralēlie porti: /dev/lp0, /dev/lp1, ..., "
+"ekvivalenti LPT1:, LPT2:, ..., 1. USB printeris: /dev/usb/lp0, 2. USB "
+"printeris: /dev/usb/lp1, ...)."
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktivizēti no %d reģistrētiem"
+msgid "All primary partitions are used"
+msgstr "Visas primārās sadaļas izmantotas"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Services"
-msgstr "Servisi"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Kad tas tiks paveikts, mēs rekomendējam restartēt X vidi, lai izvairītos no "
+"problēmām, saistītām ar hosta vārdu."
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "System"
-msgstr "Sistēma"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Ports"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Kuru OS ielādētāju lietot"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Automātiska dzelžu noteikšana un konfigurēšana sāknēšanas laikā."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Boot"
-msgstr "Sakne"
+msgid "Installation Server Configuration"
+msgstr "dhcpd servera konfigurācija"
 
 #: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "atslēgt"
+#, c-format
+msgid "Configuring IDE"
+msgstr "Konfigurēju IDE"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "aktivizēt"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Network functionality not configured"
+msgstr "Tīkla funkcionalitāte nav konfigurēta"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Ugunsmūris/Maršrutizators"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Configure module"
+msgstr "Moduļa konfigurēšana"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Security"
-msgstr "Drošība"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokosu salas"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Security Level"
-msgstr "Drošības līmenis:"
+msgid "Disconnecting from the Internet "
+msgstr "Savienoties ar Internetu"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Network"
-msgstr "Tīkls"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Lai izmaiņas stātos spēkā, jums ir jāpārstartē dators"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Tīkla interfeiss"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider phone number"
+msgstr "Pakalpojumu sniedzēja telefona numurs"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X pēc startēšanas"
+msgid "Host %s"
+msgstr "Resursa vārds"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Hardware"
-msgstr "HardDrake"
+#: ../../lang.pm:1
+#, c-format
+msgid "Armenia"
+msgstr "Armēnija"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "TV card"
-msgstr "TV karte"
+msgid "Fiji"
+msgstr "Fidži"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Nav atrasta skaņu karte. Pēc instalēšanas izmēģiniet \"harddrake\""
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Pēc instalēšanas palaidiet \"sndconfig\", lai konfigurētu skaņu karti"
+msgid "Second floppy drive"
+msgstr "Otrā diskešu iekārta"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Vai Jums ir ISA skaņas karte?"
+msgid "About Harddrake"
+msgstr "Par HardDrake"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Sound card"
-msgstr "Skaņas karte"
+msgid "Drive capacity"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Remote CUPS server"
-msgstr "Attāls CUPS serveris"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Ielieciet disketi\n"
+"Visi uz disketes esošie dati tiks dzēsti"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "No printer"
-msgstr "Nav printera"
+msgid "Size: %s"
+msgstr "Izmērs: %s"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Printer"
-msgstr "Printeris"
+msgid "Control and Shift keys simultaneously"
+msgstr "Ctrll un Shift taustiņi vienlaicīgi"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Mouse"
-msgstr "Pele"
+msgid "secondary"
+msgstr "sekundārs"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Timezone"
-msgstr "Laika josla"
+msgid "View Backup Configuration."
+msgstr "Apskatīt dublēšanas konfigurāciju"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Keyboard"
-msgstr "Tastatūra"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Summary"
-msgstr "Kopsavilkums"
+msgid "No password"
+msgstr "Bez paroles"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "NTP Server"
-msgstr "NTP serveris"
+msgid "Nigeria"
+msgstr "Nigērija"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automātiska laika sinhronizācija (izmantojot NTP)"
+msgid "There is no existing partition to use"
+msgstr "Nav nevienas sadaļas, ko varētu izmantot"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"\n"
+"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Datora pulkstenis iestatīts rādīt GMT laiku"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Lai drukātu ar TCP vai socket printeri, jums ir jānorāda printera hosta "
+"nosaukums tīklā un papildus arī porta numurs (pēc noklusēšanas 9100). HP "
+"JetDirect serveriem porta numurs parasti ir 9100, uz citiem serveriem tas "
+"var būt savādāks. Apskatiet Jūsu aparatūras rokasgrāmatu."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which is your timezone?"
-msgstr "Kāda ir jūsu laika josla?"
+msgid "Hard drive information"
+msgstr "Cietā diska informācija"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Vai vēlaties konfigurēt printeri?"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian"
+msgstr "Krievijas"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Nevar atdalīt: %s"
+msgid "Jordan"
+msgstr "Jordāna"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Pieslēdzos spoguļserverim, lai saņemtu pieejamo pakotņu sarakstu"
+msgid "Hide files"
+msgstr "Slēpt failus"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izvēlieties spoguļserveri, no kura ņemt pakotnes"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Automātiski noteikt šim datoram pievienotos printerus"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Pieslēdzos Mandrake Linux tīmeklim, lai saņemtu pieejamo spoguļserveru "
-"sarakstu sarakstu..."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"XawTV isn't installed!\n"
 "\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
 "\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Jums ir iespēja lejuplādēt atjauninātas pakotnes. Šīs pakotnes tika "
-"izlaistas\n"
-"pēc distribūcijas izlaišanas. Tās var saturēt drošības vai kļūdu labojumus.\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
 "\n"
-"Lai lejuplādētu šīs pakotnes, Jums jabūt darbojošamies Interneta "
-"savienojumam.\n"
 "\n"
-"Vai Jūs vēlaties instalēt jauninājumus?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Lūdzu ievietojiet Atjaunināšanas moduļu disketi iekārtā %s"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Lūdzu ievietojiet Startēšnas disketi iekārtā %s"
+msgid "Sorry, no floppy drive available"
+msgstr "Diemžēl nav pieejama neviena diskešu iekārta"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Post-install configuration"
-msgstr "Pēcinstalēšanas konfigurēšana"
+msgid "Bolivia"
+msgstr "Bolīvija"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Installing package %s\n"
-"%d%%"
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
 msgstr ""
-"Instalēju pakotni %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "Sagatavoju instalēšanu"
+"Uzstādiet Windows serveri, lai izveidotu printeri pieejamu zem IPP "
+"protokola, un uztādiet drukāšanu no šī datora ar \"%s\" pieslēguma tipu "
+"programmā Printerdrake.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ar nosaukumu \"%s\""
+msgid "Bad package"
+msgstr "Slikta pakotne"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
 msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
 msgstr ""
-"Ja jums ir visi šajā sarakstā norādītie CD, nospiediet Labi.\n"
-"Ja jums nav neviena no norādītajiem CD, nospiediet Atcelt.\n"
-"Ja trūkst tikai dažu CD, sarakstā atslēdziet tos un nospiediet Labi."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Viss"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Patiesi minimāla instalācija (īpaši bez urpmi)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Ar pamatdokumentāciju (ieteicams!)"
+"Pārveidojiet Jūsu datoru par spēcīgu Linux serveri ar dažiem peles "
+"klikšķiem. Web serveris, pasta serveris, ugunsmūris, maršrutētājs, failu un "
+"printeru serveris, ..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "With X"
-msgstr "Ar X"
+msgid "DrakSec Basic Options"
+msgstr "DrakSec pamata opcijas"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
 #, c-format
 msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
 msgstr ""
-"Jūs neizvēlējāties nevienu pakotņu grupu.\n"
-"Lūdzu, izvēlieties minimālo instalāciju, kādu vēlaties:"
+"\n"
+"\n"
+"\n"
+"Ievērojiet: ja Jums ir ISA PnP skaņu karte, Jums būs jālieto sndconfig "
+"programma. Vienkārši uzrakstiet \"sndconfig\" konsolē."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Type of install"
-msgstr "Instalācijas tips"
+msgid "Romania"
+msgstr "Rumānija"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Selected size is larger than available space"
-msgstr "Izvēlētais apjoms ir lielāks nekā pieejamā vieta"
+msgid "choose device"
+msgstr "izvēlieties ierīci"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Ielieciet disketi, kas satur pakotņu izvēli"
+msgid "Canada"
+msgstr "Kanāda"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Loading from floppy"
-msgstr "Ielādēju no disketes"
+msgid "Remove from LVM"
+msgstr "Izņemt no LVM"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Package selection"
-msgstr "Pakotņu izvēle"
+msgid "Timezone"
+msgstr "Laika josla"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Save on floppy"
-msgstr "Saglabāt disketē"
+msgid "German"
+msgstr "Vācijas"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Load from floppy"
-msgstr "Ielādēt no disketes"
+msgid "Next ->"
+msgstr "Tālāk ->"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
 msgstr ""
-"Lūdzu izvēlieties ielādēt vai saglabāt pakotnes no/uz disketes.\n"
-"Formāts ir tāds pats, kā ar auto_install ģenerētām disketēm."
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
 msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 msgstr ""
-"Jūsu sistēmā vairs nav brīvas vietas instalēšanai vai uzlabošanai (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Meklēju pieejamās pakotnes"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Meklēju uzlabojamās pakotnes"
+"\n"
+"Pastāv iespēja, ka šī sadaļa\n"
+"ir Draivera sadaļa, ko jums\n"
+"varbūt nevajadzētu aiztikt.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Looking at packages already installed..."
-msgstr "Meklēju jau iepriekš uzinstalētās pakotnes..."
+msgid "Guinea-Bissau"
+msgstr "Gvineja-Bisava"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Meklēju pieejamās pakotnes un pārbūvēju rpm datubāzi..."
+msgid "Horizontal refresh rate"
+msgstr "Horizontālā frekvence"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Instalēšanas pabeigšanai nepietiek swap, palieliniet swap"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Nevaru noņemt montēšanas punktu, jo šī sadaļa tiek izmantota priekš "
+"loopback.\n"
+"Vispirms noņemiet loopback"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
 msgstr ""
-"Neizdevās pārbaudīt failsistēmu %s. Vai vēlaties labot kļūdas? (uzmanieties, "
-"jūs varat zaudēt datus)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Check bad blocks?"
-msgstr "Pārbaudīt sliktos blokus?"
+msgid "USB controllers"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Izvēlieties sadaļas, ko vēlaties formatēt"
+msgid "What norm is your TV using?"
+msgstr "Kādu TV standartu jūs izmantojat?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Lai sadaļu tabulas izmaiņas stātos spēkā, jums jāpārstartē dators"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nav 1MB brīvas vietas sāknēšanas programmai! Instalēšana turpināsies, bet "
-"lai ielādētu sistēmu, Jums būs nepieciešams izveidot sāknēšanas programmas "
-"disaka sadaļu programmā DiskDrake"
+msgid "Type:"
+msgstr "Tips:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the mount points"
-msgstr "Izvēlieties montēšanas punktus"
+msgid "Share name"
+msgstr "Koplietojuma vārds"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Pārmeklēju sadaļas, lai atrastu montēšanas punktus"
+msgid "enable"
+msgstr "ieslēgt"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No partition available"
-msgstr "Nav pieejamu sadaļu"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Pieslēdzos Mandrake Linux tīmeklim, lai saņemtu pieejamo spoguļserveru "
+"sarakstu sarakstu..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Configuring IDE"
-msgstr "Konfigurēju IDE"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Pārstartējot tīklu, uzradās problēma: \n"
+"\n"
+"%s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Remove the loopback file?"
+msgstr "Atvienot loopback failu?"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurēju PCMCIA kartes..."
+msgid "Selected size is larger than available space"
+msgstr "Izvēlētais apjoms ir lielāks nekā pieejamā vieta"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "NCP server name missing!"
+msgstr "Trūkst NCP servera vārds!"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "3. pogas emulācija"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "Lūdzu izvēlieties jūsu peles tipu."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Button 2 Emulation"
-msgstr "2. pogas emulācija"
+msgid "Hard Disk Backup files..."
+msgstr "Cietņe dublējuma faili..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Buttons emulation"
-msgstr "Pogu emulācija"
+msgid "Laotian"
+msgstr "Laoiešu"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Lūdzu izvēlieties, ar kuru seriālo portu ir saslēgta pele."
+msgid "Samoa"
+msgstr "Samoa"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../services.pm:1
 #, c-format
-msgid "Mouse Port"
-msgstr "Peles ports"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"rstat protokols ļauj tīkla lietotājiem saņemt veiktspējas\n"
+"informāciju par jebkuru šī tīkla datoru."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Please choose your type of mouse."
-msgstr "Lūdzu izvēlieties jūsu peles tipu."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Šifrēšanas atslēga"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Atjaunināt"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Šī ir instalēšana vai atjaunināšana?"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Instalēt/Atjaunināt"
+msgid "Scanner"
+msgstr "Izvēlieties skeneri"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Šeit ir pilns pieejamo tastatūru saraksts"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Brīdinājums: šīs grafiskās kartes izmēģināšana var uzkārt datoru"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Lūdzu izvēlieties jūsu tastatūras izkārtojumu."
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Lietotāja vārdā var būt tikai mazie angļu burti, cipari, `-' un `_'"
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Quit"
-msgstr "Beigt"
+msgid "Menudrake"
+msgstr "Menudrake"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "License agreement"
-msgstr "Licences līgums"
+msgid "Welcome To Crackers"
+msgstr "Sveiciens hakeriem"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "An error occurred"
-msgstr "Atklāta kļūda"
+msgid "Module options:"
+msgstr "Moduļa opcijas:"
 
-#: ../../install_steps_newt.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgid "Secure your networks with the Multi Network Firewall"
 msgstr ""
-"   <Tab>/<Alt-Tab> pāriet | <Space> izvēlēties | <F12> uz nākamo ekrānu"
 
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalēšana %s"
+msgid "Go on without configuring the network"
+msgstr "Turpināt bez tīkla konfigurēšanas"
 
-#: ../../install_steps.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "No floppy drive available"
-msgstr "Nav nevienas diskešu iekārtas"
+msgid "Abort"
+msgstr "Pārtraukt"
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Welcome to %s"
-msgstr "Jūs sveic %s"
+msgid "No password prompt on %s at port %s"
+msgstr "Nav paroles pieprasījuma uz %s pie porta %s"
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Dažas svarīgas pakotnes neizdevās pareizi instalēt.\n"
-"Ir bojāta jūsu kompaktdisku iekārta vai instalācijas disks.\n"
-"Parbaudiet disku uz instalēta datora, izmantojot komandu \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Atzīmējiet, vai vēlaties izmantot neattinošu ierīci."
 
-#: ../../install_steps.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Izmantot brīvo vietu"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dublēts montēšanas punkts %s"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
 
-#: ../../install_steps.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
 msgstr ""
-"Atklāta kļūda, bet es nezinu, kā ar to pareizi apieties.\n"
-"Turpiniet, ja vēlaties riskēt."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Lūdzu uzgaidiet"
+"Windows sadaļa ir pārāk fragmentēta. Vispirms no Windows vides palaidiet "
+"``defrag'' un tad atsāciet Mandrake Linux instalēšanu."
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ok"
-msgstr "Labi"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvoraka (Norvēģijas)"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Finish"
-msgstr "Beigt"
+msgid "Hard Disk Backup Progress..."
+msgstr "Cietā diska rezerver kopēšanas progress..."
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Basic"
-msgstr "Pamata"
+msgid "Unable to fork: %s"
+msgstr "Nevar atdalīt: %s"
 
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Advanced"
-msgstr "Izvērsta"
+msgid "Type: "
+msgstr "Tips: "
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Remove"
-msgstr "Izdzēst ierakstu"
+msgid "<-- Edit Client"
+msgstr "<-- Dzēst klientu"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Modify"
-msgstr "Mainīt"
+msgid "no fonts found"
+msgstr "fonti nav atrasti"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Add"
-msgstr "Pievienot"
+msgid "Mouse"
+msgstr "Pele"
 
-#: ../../interactive.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Choose a file"
-msgstr "Izvēlieties failu"
+msgid "not enough room in /boot"
+msgstr "nepietiek vietas /boot sadaļā"
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+msgid "Choosing an arbitratry driver"
 msgstr ""
-"Šeit Jūs varat izvēlēties taustiņu vai taustiņu kombināciju,\n"
-"kas Jums ļaus pārslēgties starp dažādiem tastatūras\n"
-"izkārtojumiem (piemēram, latīņu un ne-latīņu)"
 
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Right \"Windows\" key"
-msgstr "Labais \"Windows\" taustiņš"
+msgid "Host name"
+msgstr "Resursa vārds"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Left \"Windows\" key"
-msgstr "Kreisais \"Windows\" taustiņš"
+msgid "Liechtenstein"
+msgstr "Lihtenšteina"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" taustiņš"
+msgid "the color of the progress bar"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt un Shift taustiņi vienlaicīgi"
+msgid "Suppress Fonts Files"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl un Alt taustiņi vienlaicīgi"
+msgid "Add to RAID"
+msgstr "Pievienot pie RAID"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "CapsLock key"
-msgstr "CapsLock taustiņš"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Ctrll un Shift taustiņi vienlaicīgi"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Printeris \"%s\" tika veiksmīgi pievienots Star Office/OpenOffice.org/GIMP."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Abi Shift taustiņi vienlaicīgi"
+msgid "No floppy drive available!"
+msgstr "Diskešu iekārta nav pieejama!"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Lai saņemtu patreizējam printerim pieejamo opciju sarakstu, klikšķiniet uz "
+"\"Drukāšanas opciju saraksts\" pogas."
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Right Alt key"
-msgstr "Labais Alt taustiņs"
+msgid "Continue anyway?"
+msgstr "Tad turpināt?"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Dienvidslāvu (latīņu)"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Ja jūsu printeris nav sarakstā, izvēlieties kādu savietojamu (skatieties "
+"printera rokasgrāmatā) vai līdzīgu."
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamas \"numuru rinda\" QWERTY"
+msgid "Printer"
+msgstr "Printeris"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "US keyboard (international)"
-msgstr "ASV tastatūra (starptautiskā)"
+msgid "Saudi Arabia"
+msgstr "Saūda Arābija"
 
-#: ../../keyboard.pm:1
+#
+#: ../../services.pm:1
 #, c-format
-msgid "US keyboard"
-msgstr "ASV tastatūra"
+msgid "Internet"
+msgstr "Internets"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "UK keyboard"
-msgstr "Apvienotās Karalistes"
+msgid "Some devices were added:\n"
+msgstr "Tika pievienotas dažas iekārtas:\n"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Ukrainian"
-msgstr "Ukrainas"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Ģeometrija: %s cilindri, %s galvas, %s sektori\n"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turcijas (modernais \"Q\" modelis)"
+msgid "Printing on the printer \"%s\""
+msgstr "Drukāju uz printeri \"%s\""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turcijas (tradicionālais \"F\" modelis)"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Tajik keyboard"
-msgstr "Tadžiku tastatūra"
+msgid "Restore From Tape"
+msgstr "Atjaunot no lentas"
 
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Thai keyboard"
-msgstr "Tai tastatūra"
+msgid "Choose the profile to configure"
+msgstr "Izvēlieties konfigurējamo profilu"
 
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Armēnijas (rakstāmmašīna)"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup Now from configuration file"
+msgstr "Sākt dublēšanu, izmantojot konfigurācijas failu"
+
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (TSCII)"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Printera vārdam jāsatur tikai burtus, ciparus un pasvītrojumu"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbu (kirilica)"
+msgid "Restarting printing system..."
+msgstr "Pārstartēju printēšanas sistēmu..."
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovākijas (QWERTY)"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovākijas (QWERTZ)"
+msgid "See hardware info"
+msgstr "Apskatīt dzelžu informāciju"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Slovenian"
-msgstr "Slovēnijas"
+msgid "First sector of boot partition"
+msgstr "Sāknējamās sadaļas pirmais sektors"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Swedish"
-msgstr "Zviedrijas"
+msgid "Printer manufacturer, model"
+msgstr "Printera izgatavotājs, modelis"
 
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Russian (Yawerty)"
-msgstr "Krievijas (Yawerty)"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
 
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Russian"
-msgstr "Krievijas"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumāņu (qwertz)"
+msgid "Subnet Mask:"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumāņu (qwertz)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "LiLo un Bootsplash tēmu instalēšana ir veiksmīga"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanādas (Kvebeka)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Divi svarīgākie parametri ir vertikālā pārzīmēšanas frekvence, kas nosaka\n"
+"visa ekrāna pārzīmēšanas biežumu, un horizontālās sinhronizācijas\n"
+"frekvence, kas nosaka skanēšanas līniju parādīšanas biežumu.\n"
+"\n"
+"Ir ĻOTI SVARĪGI, lai jūs nenorādītu monitora tipu, kura sinhronizācijas\n"
+"frekvence pārsniedz jūsu monitora iespējas: jūs varat sabojāt savu "
+"monitoru.\n"
+" Ja neesat pārliecināts, izvēlieties konservatīvāko variantu."
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Portuguese"
-msgstr "Portugāles"
+msgid "Modify"
+msgstr "Mainīt"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polijas (qwertz izvietojums)"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polijas (qwerty izvietojums)"
+msgid "Need hostname, username and password!"
+msgstr "Nepieciešams hosts, lietotāja vārds un parole!"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Norwegian"
-msgstr "Norvēģijas"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV ir protokols, ka ļauj jums lokāli montēt web servera direktoriju\n"
+"un rīkoties ar to kā ar lokālu failsistēmu (ja vien web serveris ir "
+"konfigurēts\n"
+"kā WebDAV serveris). Ja jūs vēlaties pievienot WebDAV montēšanas\n"
+"punktus, izvēlieties \"Jauns\"."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Dutch"
-msgstr "Dānijas"
+msgid "HardDrake"
+msgstr "HardDrake"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Maltese (US)"
-msgstr "Maltese (US)"
+msgid "new"
+msgstr "jauns"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Maltese (UK)"
-msgstr "Maltese (UK)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Vai vēlaties konfigurēt printeri?"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongoļu (kirilica)"
+msgid "Wizard"
+msgstr "Meistars"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burmese)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "atklāts %s"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Macedonian"
-msgstr "Maķedonijas"
+msgid "Please choose where you want to backup"
+msgstr "Lūdzu, izvēlieties, kur vēlaties dublēt"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Malayalam"
-msgstr ""
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Lai sadaļu tabulas izmaiņas stātos spēkā, jums jāpārstartē dators"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Latvian"
-msgstr "Latviešu"
+msgid "Do not include the browser cache"
+msgstr "Neiekļaut pārlūka kešu"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lietuvas \"fonētiskā\" QWERTY"
+msgid "Please, choose your keyboard layout."
+msgstr "Lūdzu izvēlieties jūsu tastatūras izkārtojumu."
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
 #, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lietuvas \"numuru rinda\" QWERTY"
+msgid "Standard"
+msgstr "Standarta"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lietuvas AZERTY (jaunā)"
+msgid "Please choose your mouse type."
+msgstr "Lūdzu izvēlieties jūsu peles tipu."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lietuvas AZERTY (vecā)"
+msgid "Connect..."
+msgstr "Savienoju..."
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Konfigurēju printeri \"%s\"..."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "pārkonfigurēt"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Laotian"
-msgstr "Laoiešu"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Pārtraukt"
+
+#: ../../network/network.pm:1
 #, c-format
-msgid "Latin American"
-msgstr "Latīņamerikas"
+msgid "Proxies configuration"
+msgstr "Proxy serveru konfigurācija"
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Korean keyboard"
-msgstr "Korejiešu tastatūra"
+msgid "GlidePoint"
+msgstr "GlidePoint"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Japānas 106 taistiņi"
+msgid "Start: sector %s\n"
+msgstr "Sākums: sektors %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Network interface already configured"
+msgstr "Tīkla interfeiss jau ir konfigurēts"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Italian"
-msgstr "Itālijas"
+msgid "Couldn't access the floppy!"
+msgstr "Nevarēju piekļūt disketei!"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Icelandic"
-msgstr "Islandes"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "pievienojos Bugzilla meistaram ..."
 
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Iranian"
-msgstr "Irānas"
+msgid "Mail Server"
+msgstr "Pasta serveris"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Izraēlas (fonētiskā)"
+msgid "Please click on a partition"
+msgstr "Lūdzu uzklikšķiniet uz sadaļas"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Israeli"
-msgstr "Izraēlas"
+msgid "Linux"
+msgstr "Linux"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Croatian"
-msgstr "Horvātijas"
+msgid "Have a nice day!"
+msgstr "Lai jums jauka diena!"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hungarian"
-msgstr "Ungārijas"
+msgid "across Network"
+msgstr "pa tīklu"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "Atjaunināt"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Select Printer Connection"
+msgstr "Izvēlieties printera savienojumu"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Greek"
-msgstr "Grieķijas"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Notiek TV kanālu skanēšana ..."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijas (\"latīņu\" izvietojums)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Kļūda pārsūtot failu pa FTP.\n"
+" Lūdzu, izlabojiet Jūsu FTP konfigurāciju."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijas (\"krievu\" izvietojums)"
+msgid "IP Range Start:"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "French"
-msgstr "Francijas"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Interneta superservera demons (parasti saukts par inetd) pēc vajadzības\n"
+"startē dažādus interneta servisus. Tas it atbildīgs par daudzu servisu\n"
+"startēšanu, tajā skaitā telnet, ftp, rsh un rlogin. inetd atslēgšana\n"
+"atslēdz arī visus servisus, par kuriem tas atbild."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Finnish"
-msgstr "Somijas"
+msgid "the height of the progress bar"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Spanish"
-msgstr "Spānijas"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Saglabāt, izmantojot %s, uz hosta %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Estonian"
-msgstr "Igaunijas"
+msgid "Argentina"
+msgstr "Argentīna"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvoraka (Zviedru)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoraka (Norvēģijas)"
+msgid "Domain Name Server"
+msgstr "Domēna nosaukumu serveris"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Dvorak (US)"
-msgstr "Dvoraka (US)"
+msgid "Security Level:"
+msgstr "Drošības līmenis:"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Danish"
-msgstr "Dānijas"
+msgid "Mount points must begin with a leading /"
+msgstr "Montēšanas punktiem jāsākas ar /"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Postfix Mail Server"
+msgstr "Postfix pasta serveris"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "German (no dead keys)"
-msgstr "Vācijas (bez mēmajiem taustiņiem)"
+msgid "Quit without saving"
+msgstr "Iziet nesaglabājot"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "German"
-msgstr "Vācijas"
+msgid "Yemen"
+msgstr "Jemena"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
+#, fuzzy, c-format
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Šis produkts ir pieejams MandrakeStore Web vietā"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "Čehijas (QWERTY)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Lūdzu ievadiet maksimālo izmēru,\n"
+" atļauto priekš Drakbackup"
 
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Čehijas (QWERTZ)"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Ir daudzas lietas, no kurām izvēlēties (%s).\n"
 
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "Šveices (franču izvietojums)"
+msgid "Hard drive detection"
+msgstr "Cietā diska noteikšana"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "Šveices (vācu izvietojums)"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Jūs neizvēlējāties nevienu pakotņu grupu.\n"
+"Lūdzu, izvēlieties minimālo instalāciju, kādu vēlaties:"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Belarusian"
-msgstr "Baltkrievijas"
+msgid "Please enter the WebDAV server URL"
+msgstr "Lūdzu ievadiet WebDAV servera URL"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Bosnian"
-msgstr "Bosniešu"
+msgid "Tajikistan"
+msgstr "Tadžikistāna"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazīlijas (ABNT-2)"
+msgid "Accept"
+msgstr "Pieņemt"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgāru (BDS)"
+msgid "Description"
+msgstr "Apraksts"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgāru (fonētiskā)"
+msgid "Error opening %s for writing: %s"
+msgstr "Kļūda, atverot %s ierakstīšanai: %s"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Bengali"
-msgstr "Bengāļu"
+msgid "Mouse type: %s\n"
+msgstr "Peles tips: %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Belgian"
-msgstr "Beļģijas"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Jūsu karte spēj nodrošināt 3D akselerāciju ar XFree %s."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidžānas (latīņu)"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Lūdzu izvēlieties Jūsu cd/DVD mēdija izmēru (Mb)"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Arabic"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armēnijas (fonētiskā)"
+msgid "Expert Area"
+msgstr "Eksperta apgabals"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armēnijas (rakstāmmašīna)"
+msgid "Choose a monitor"
+msgstr "Norādiet monitoru"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Armenian (old)"
-msgstr "Armēnijas (vecā)"
+msgid "Empty label not allowed"
+msgstr "Tukšs nosaukums nav atļauts"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Albanian"
-msgstr "Albāņu"
+msgid "Maltese (UK)"
+msgstr "Maltese (UK)"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Polish"
-msgstr "Polijas"
+msgid "I can't add any more partition"
+msgstr "Vairāk sadaļas nevar pievienot"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dvorak"
-msgstr "Dvoraka"
+msgid "Size in MB: "
+msgstr "Izmērs MB: "
 
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabve"
+msgid "Remote printer"
+msgstr "Attāls printeris"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Zambia"
-msgstr "Zambija"
+msgid "Please choose a language to use."
+msgstr "Lūdzu izvēlieties izmantojamo valodu."
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "South Africa"
-msgstr "Dienvidāfrika"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"BRĪDINĀJUMS: Šī ierīce jau agrāk ir konfigurēta, lai pievienotos "
+"Internetam.\n"
+"Vienkārši apstipriniet, ka vēlaties saglabāt šo konfigurāciju.\n"
+"Tālāko lauku izmainīšana pārrakstīs šo konfigurāciju."
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Serbia"
-msgstr "seriāla"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Sistēmu var konfigurēt tā, lai pēc startēšanas automātiski tiktu\n"
+"atvērta viena noteikta lietotāja sesija. \n"
+"Vai vēlaties lietot šo iespēju?"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Mayotte"
-msgstr "Majota"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Floppy format"
+msgstr "Formatēt"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Yemen"
-msgstr "Jemena"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "Generic Printers"
+msgstr "Tipveida printeri"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "Volisa un Futunas salas"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Lūdzu, izvēlieties portu, pie kura Jūsu printeris ir pieslēgts, vai ievadiet "
+"ierīces/faila vārdu ievades rindā"
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Vietnam"
-msgstr "Vjetnama"
+msgid "First sector of the root partition"
+msgstr "Sāknējamās sadaļas pirmais sektors"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virdžīnu salas (ASV)"
+msgid "Alternative drivers"
+msgstr "alternatīvi draiveri"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virdžīnu salas (Britu)"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Lūdzu, atzīmējiet visas nepieciešamās opcijas.\n"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Venezuela"
-msgstr "Venecuēla"
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Latviešu"
+msgid "Cape Verde"
+msgstr "Kabovarde"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistāna"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Uruguay"
-msgstr "Urugvaja"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
 
 #: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "ASV mazsvarīgās nomaļās salas"
+#, c-format
+msgid "Guam"
+msgstr "Guama"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Lūdzu, izvēlieties portu, pie kura Jūsu printeris ir pieslēgts, vai ievadiet "
+"ierīces/faila vārdu ievades rindā"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Ukraine"
-msgstr "Ukraina"
+msgid "/Options/Test"
+msgstr "/Opcijas/Tests"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Tanzania"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
 msgstr ""
+"Šo līmeni ir jāizmanto uzmanīgi. Tas padara jūsu sistēmu vieglāk\n"
+"izmantojamu, taču ļoti nedrošu: to nedrīkst izmantot datoram, kas ir\n"
+"savienots ar citiem datoriem vai Internetam. Netiek prasītas paroles."
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Taizeme"
+msgid "Mounting partition %s"
+msgstr "Formatēju sadaļu %s"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "User name"
+msgstr "Lietotāja vārds"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidada un Tobago"
+msgid "New configuration (isdn-light)"
+msgstr "Jauna konfigurācija (isdn-light)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Turkey"
-msgstr "Turcija"
+msgid "Userdrake"
+msgstr "Userdrake"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Kuru sadaļu vēlaties izmantot priekš Linux4Win?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Tunisia"
-msgstr "Tunisija"
+msgid "Backup system"
+msgstr "Dublēšanas sistēma"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistāna"
+msgid "Test pages"
+msgstr "Izmēģinājuma lapas"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "East Timor"
-msgstr "Austrum Timūra"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Atjaunojamo datu saraksts:\n"
+"\n"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau salas"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "Kopēju %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tajikistan"
-msgstr "Tadžikistāna"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Socket printera opcijas"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Thailand"
-msgstr "Taizeme"
+msgid "Card mem (DMA)"
+msgstr "Kartes mem (DMA)"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Togo"
-msgstr "Togo"
+msgid "France"
+msgstr "Francija"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "French Southern Territories"
-msgstr "Franču dienvidu teritorijas"
+msgid "browse"
+msgstr "pārlūkot"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Chad"
-msgstr "Čada"
+msgid "Checking installed software..."
+msgstr "Pārbaudu instalētās programmas..."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Tērksa un Kaikosa salas"
+msgid "Remote printer name missing!"
+msgstr "Nav attālā printera nosaukuma!"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Swaziland"
-msgstr "Svazilenda"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Syria"
-msgstr "Surinama"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Vai vēlaties ieslēgt drukāšanu uz lokālā tīkla printeriem?\n"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "El Salvador"
-msgstr "Salvadora"
+msgid "Turkey"
+msgstr "Turcija"
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Sao Tome and Principe"
-msgstr ""
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Suriname"
-msgstr "Surinama"
+msgid "Number of buttons"
+msgstr "Pogu skaits"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Somalia"
-msgstr "Somālija"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vjetnamas \"numuru rinda\" QWERTY"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Senegal"
-msgstr "Senegāla"
+msgid "Module"
+msgstr "Modulis"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "San Marino"
-msgstr "Sanmarino"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Papildus, drukāšanas rindas, kas nav izveidotas ar šo programmu vai "
+"\"foomatic-configure\", nevar pārlikt"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sjerra Leone"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Hardware"
+msgstr "HardDrake"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Slovakia"
-msgstr "Slovākija"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl un Alt taustiņi vienlaicīgi"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbāra un Jana Mejena salas"
+msgid "United States"
+msgstr "A.S.V."
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Slovenia"
-msgstr "Slovēnija"
+msgid "Default OS?"
+msgstr "Noklusētā OS?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Saint Helena"
-msgstr "Svētās Helēnas sala"
+msgid "Swiss (German layout)"
+msgstr "Šveices (vācu izvietojums)"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Singapore"
-msgstr "Singapūra"
+msgid "Configure all heads independently"
+msgstr "Konfigurēt visus ekrānus neatkarīgi"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Sudan"
-msgstr "Sudāna"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Šis ir automātiski noteikto printeru saraksts. Lūdzu, izvēlieties printeri, "
+"kuru vēlaties uzstādīt. Printera konfigurēšana darbosies pilnībā "
+"automātiski. Ja printeris netika noteikts pareizi, vai ja vēlaties piemērotu "
+"printera konfigurāciju, ieslēdziet \"Manuāla konfigurēšana\"."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Seychelles"
-msgstr "Seišeļu salas"
+msgid "NTP Server"
+msgstr "NTP serveris"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Solomon Islands"
-msgstr "Zālamana salas"
+msgid "Load/Save on floppy"
+msgstr "Ielādēt/saglabāt disketē"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Saudi Arabia"
-msgstr "Saūda Arābija"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid "nice"
+msgstr "derīga"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
 #, fuzzy, c-format
-msgid "Russia"
-msgstr "Krievijas"
+msgid "Leaving in %d seconds"
+msgstr "%d sekundes"
 
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Romania"
-msgstr "Rumānija"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Lūdzu norādiet, kuram seriālajam portam ir pievienots modēms."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Reunion"
-msgstr ""
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Country"
+msgstr "Valsts:"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Qatar"
-msgstr "Katara"
+msgid "Property"
+msgstr "Īpašība"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Ghostscript"
+msgstr "Ghostscript"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Paraguay"
-msgstr "Paragvaja"
+msgid "LAN Configuration"
+msgstr "LAN konfigurācija"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Portugal"
-msgstr "Portugāle"
+msgid "Ghana"
+msgstr "Gana"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Ceļa izvēle"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Path or Module required"
+msgstr "Nepieciešams ceļš vai modulis"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Riko"
+msgid "Advanced Options"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Pitcairn"
-msgstr "Pitkerna"
+msgid "Coma bug"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Pašlaik jums ir jāizvēlas, kurā(s) diska sadaļā(s) instalēt Mandrake Linux\n"
+"operētājsistēmu. Ja sadaļas jau ir izveidotas (agrākas GNU/Linux "
+"instalēšanas\n"
+"laikā vai ar citu diska sadalīšanas rīku), jūs varat izmantot esošās "
+"sadaļas.\n"
+"Citos gadījumos ir jāveido jaunas diska sadaļas.\n"
+"\n"
+"\n"
+"Lai veidotu sadaļas, jums vispirms ir jāizvēlas cietais disks. Jūs varat\n"
+"norādīt sadalāmo disku, noklikšķinot uz \"hda\" pirmajam IDE diskam,\n"
+"\"hdb\" - otrajam diskam, \"sda\" - pirmajam SCSI diskam, utt.\n"
+"\n"
+"\n"
+"Lai sadalītu izvēlēto cieto disku, varat izmantot sekojošas opcijas:\n"
+"\n"
+"   * Izdzēst visu: šī opcija izdzēš visas sadaļas, kas atrodas uz izvēlētā "
+"cietā diska.\n"
+"\n"
+"\n"
+"   * Izvietot automātiski: šī opcija ļauj jums automātiski izveidot Ext2 un "
+"swap sadaļas jūsu cietā diska\n"
+"     brīvajā vietā.\n"
+"\n"
+"\n"
+"   * Salabot sadaļu tabulu: ja sadaļu tabula ir bojāta, jūs varat mēģināt to "
+"autjaunot, izmantojot šo opciju.\n"
+"     Esiet uzmanīgi un atcerieties, ka tas var neizdoties.\n"
+"\n"
+"\n"
+"   * Atsaukt: jūs varat izmantot šo opciju, lai atceltu izmaiņas.\n"
+"\n"
+"\n"
+"   * Pārlādēt: jūs varat izmantot šo opciju, ja vēlaties atsaukt visas "
+"izmaiņas un ielādēt sākotnējo sadaļu tabulu.\n"
+"\n"
+"\n"
+"   * Meistars: Ja cietā diska sadalīšanai vēlaties izmantot meistaru, varat "
+"lietot šo opciju. Tā ir ieteicama,\n"
+"     ja jums nav labu zināšanu par diska sadalīšanu.\n"
+"\n"
+"\n"
+"   * Atjaunot no disketes: ja iepriekšējās instalēšanas laikā saglabājāt "
+"sadaļu tabulu disketē, jūs varat\n"
+"     to atjaunot, izmantojot šo opciju.\n"
+"\n"
+"\n"
+"   * Saglabāt disketē: ja vēlaties sadaļu tabulu saglabāt disketē, lai "
+"varētu to atjaunot, izmantojiet šo\n"
+"     opciju. Ir ļoti ieteicams izmantot šo opciju.\n"
+"\n"
+"\n"
+"   * Izdarīts: kad esat pabeiguši cietā diska dalīšanu, izmantojiet šo "
+"opciju, lai saglabātu izmaiņas.\n"
+"\n"
+"\n"
+"Jūsu zināšanai, jebkuru opciju var izsaukt ar tastatūru: pārvietojieties "
+"starp sadaļām, izmantojot Tab un Aušup/Lejup bultiņas.\n"
+"\n"
+"\n"
+"Kad ir izvēlēta sadaļa, jūs varat izmantot:\n"
+"\n"
+"           * Ctrl-c, lai izveidotu jaunu sadaļu (kad ir izvēlēta tukša "
+"sadaļa)\n"
+"\n"
+"           * Ctrl-d, lai izdzēstu sadaļu\n"
+"\n"
+"           * Ctrl-m, lai uzstādītu montēšanas punktu"
+
+#: ../../help.pm:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Poland"
-msgstr "Polija"
+msgid "There was an error installing packages:"
+msgstr "Pakotņu instalēšanas laikā atklāta kļūda:"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Pakistan"
-msgstr "Pakistāna"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark inkjet konfigurācija"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Philippines"
-msgstr "Filipīnas"
+msgid "Undo"
+msgstr "Atsaukt"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Jaungvineja"
+msgid "Save partition table"
+msgstr "Ierakstīt sadaļu tabulu"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "French Polynesia"
-msgstr "Franču Polinēzija"
+msgid "Finnish"
+msgstr "Somijas"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Macedonia"
+msgstr "Maķedonija"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Lietotāju koplietojumi izmanto grupu \"fileshare\". \n"
+"Jūs varat izmantot userdrake, lai šai grupai pievienotu lietotājus."
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Oman"
-msgstr "Omāna"
+msgid "Slovenian"
+msgstr "Slovēnijas"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Libya"
+msgstr "Libērija"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "New Zealand"
-msgstr "Jaunzēlande"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Tiek konfigurēti skripti, instalētas programmas, startēti serveri..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Niue"
+msgid ""
+"\n"
+"- Burn to CD"
 msgstr ""
+"\n"
+"- Ierakstīt CD"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "Table"
+msgstr "Tabula"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Nepal"
-msgstr "Nepāla"
+msgid "I don't know how to format %s in type %s"
+msgstr "Nezinu, kā formatēt %s, izmantojot tipu %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Nicaragua"
-msgstr "Nikaragva"
+msgid "Model"
+msgstr "Modelis"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Nigeria"
-msgstr "Nigērija"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Norfolk Island"
-msgstr "Norfolkas sala"
+msgid "Stop Server"
+msgstr "Apturēt serveri"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Niger"
-msgstr "Nigērija"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "New Caledonia"
-msgstr "Jaunkaledonija"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Modelis"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Namibia"
-msgstr "Namībija"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Mozambique"
-msgstr "Mozambika"
+msgid "Tuvalu"
+msgstr "Tuvalu"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Malaysia"
-msgstr "Malaizija"
+msgid "Use auto detection"
+msgstr "Izmantot autonoteikšanu"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Mexico"
-msgstr "Meksika"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM nodrošina peles atbalstu dažādām teksta režīma Linux programmām,\n"
+"piemēram, Midnight Commander. Tas arī ļauj no konsoles ar peli veikt\n"
+"izgriezt-un-iespraust operācijas, kā arī piedāvā izlecošo izvēlņu\n"
+"atbalstu konsolei."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Malawi"
-msgstr "Malāvi"
+msgid "Started on boot"
+msgstr "Palaists pie ielādes"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Maldives"
-msgstr "Maldivu salas"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Mauritius"
-msgstr "Maurīcija"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Montserrat"
-msgstr "Montserrata"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Saglabāt uz lentas iekārtā : %s"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Mauritania"
-msgstr "Maurīcija"
+msgid "East Timor"
+msgstr "Austrum Timūra"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Martinique"
-msgstr "Martinika"
+msgid "Del profile..."
+msgstr "Dzēst profilu..."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Northern Mariana Islands"
-msgstr "Zemeļmarianas salas"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mongolia"
-msgstr "Mongolija"
+msgid "Installing Foomatic..."
+msgstr "Instalēju Foomatic..."
 
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Myanmar"
-msgstr "Mjanma"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Lūdzu aizveriet sesiju un nospiediet Ctrl-Alt-BackSpace"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Mali"
-msgstr "Mali"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "atklāts %s"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Nepieciešams instalēt pakotni %s. Vai vēlaties to instalēt?"
+
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Macedonia"
-msgstr "Maķedonija"
+msgid "Package: "
+msgstr "Pakotne:"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Marshall Islands"
-msgstr "Māršala salas"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Nav iespējams rakstīt /etc/sysconfig/bootsplash."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Madagascar"
-msgstr "Madagaskāra"
+msgid "SECURITY WARNING!"
+msgstr "DROŠĪBAS BRĪDINĀJUMS!"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Moldova"
-msgstr "Moldāvija"
+msgid "StarOffice"
+msgstr "StarOffice"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "No, I don't want autologin"
+msgstr "Nē, negribu automātiski pieslēgties"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Morocco"
-msgstr "Maroka"
+msgid "Windows Migration tool"
+msgstr "Windows migrēšanas rīks"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, fuzzy, c-format
-msgid "Libya"
-msgstr "Libērija"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Latvia"
-msgstr "Latvija"
+msgid "All languages"
+msgstr "Valodas izvēle"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Luxembourg"
-msgstr "Luksemburga"
+msgid "Removing %s"
+msgstr "Atvienoju %s"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Lithuania"
-msgstr "Lietuva"
+msgid "Testing your connection..."
+msgstr "Izmēģinu savienojumu..."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "gabala izmērs"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Liberia"
-msgstr "Libērija"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Tagad tiek izmantota parole, taču izmantot datoru tīklā vēl aizvien\n"
+"nav ieteicams."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sri Lanka"
-msgstr "Šrilanka"
+msgid "Start sector: "
+msgstr "Sākuma sektors: "
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Liechtenstein"
-msgstr "Lihtenšteina"
+msgid "Congo (Brazzaville)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Saint Lucia"
-msgstr ""
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Nepieciešams instalēt pakotni %s. Vai vēlaties to instalēt?"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Lebanon"
-msgstr "Lībija"
+msgid "Seychelles"
+msgstr "Seišeļu salas"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Laos"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Kazakhstan"
-msgstr "Kazahstāna"
+msgid "Bad password on %s"
+msgstr "SLikta parole uz %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Cayman Islands"
-msgstr "Kaimanu salas"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Kuwait"
-msgstr "Kuveita"
+msgid "Zambia"
+msgstr "Zambija"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Korea"
-msgstr "Vairāk"
+msgid "Security Administrator (login or email)"
+msgstr "Drošības administrators (lietotāju vai pasta)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Korea (North)"
-msgstr ""
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Diemžēl mēs atbalstām tikai 2.4 kodolus."
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+msgid "Romanian (qwerty)"
+msgstr "Rumāņu (qwertz)"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Comoros"
-msgstr "Komoru salas"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Under Devel ... please wait."
+msgstr "Izstrādes stadijā ... lūdzu uzgaidiet."
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Czech Republic"
+msgstr "Čehijas Republika"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cambodia"
-msgstr "Kombodža"
+msgid "Egypt"
+msgstr "Ēģipte"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgīzija"
+msgid "Old configuration (isdn4net)"
+msgstr "Veca konfigurācija (isdn4net)"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Kenya"
-msgstr "Kenija"
+msgid "Sound card"
+msgstr "Skaņas karte"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Japan"
-msgstr "Japāna"
+msgid "Import Fonts"
+msgstr "Fontu importēšana"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, fuzzy, c-format
-msgid "Jordan"
-msgstr "Jordāna"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Jums ir viena liela FAT sadaļa\n"
+"(parasti to izmanto MicroSoft Dos/Windows).\n"
+"Iesaku vispirms izmainīt šīs sadaļas izmēru\n"
+"(uzklikšķiniet uz tās, tad uz \"Mainīt izmēru\")"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Jamaica"
-msgstr "Jamaika"
+msgid "Suppress Temporary Files"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Iceland"
-msgstr "Islande"
+msgid "Change partition type"
+msgstr "Nomainīt sadaļas tipu"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Iran"
-msgstr "Irāka"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Iraq"
-msgstr "Irāka"
+msgid "Network Options"
+msgstr "Tīkla opcijas"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britu Indijas okeāna teritorija"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Attēlot tēmu\n"
+"zem konsoles"
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "India"
-msgstr "Indija"
+msgid "Statistics"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Israel"
-msgstr "Izraēla"
+msgid "(on %s)"
+msgstr "uz %s)"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Ireland"
-msgstr "Īrija"
+msgid "MM Series"
+msgstr "MM Series"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Indonesia"
-msgstr "Indonēzija"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Bibliotēka, kas aizsargā pret bufera pārpildīšanas un rindas formāta "
+"uzbrukumiem."
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Hungary"
-msgstr "Ungārija"
+msgid "average"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid "New printer name"
+msgstr "Jauns printera nosaukums"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Croatia"
-msgstr "Horvātija"
+msgid "Equatorial Guinea"
+msgstr "Ekvatoriālā Gvineja"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Honduras"
-msgstr "Hondurasa"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Herda sala un Makdonalda salas"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Build Backup"
+msgstr "Būvēt rezerves kopiju"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hong Kong"
-msgstr "Honkonga"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "China"
-msgstr "Ķīna"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Guyana"
-msgstr "Gajana"
+msgid "Romanian (qwertz)"
+msgstr "Rumāņu (qwertz)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Guinea-Bissau"
-msgstr "Gvineja-Bisava"
+msgid "Write Config"
+msgstr "Ierakstīt konfigurāciju"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Guam"
-msgstr "Guama"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"routed demons ļauj automātiski atjaunināt IP maršrutizatora tabulu,\n"
+"izmantojot RIP protokolu. Kaut gan RIP tiek plaši izmantots nelielos\n"
+"tīklos, sarežģītākiem tīkliem ir nepieciešami sarežģītāki maršrutizēšanas\n"
+"protokoli."
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Guatemala"
-msgstr "Gvatemala"
+msgid "Kiribati"
+msgstr "Kiribati"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatoriālā Gvineja"
+msgid "Browse"
+msgstr "Pārlūkot"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Guadeloupe"
-msgstr "Gvadelupa"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "CDROM"
+msgstr "uz CDROM"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Guinea"
-msgstr "Gvineja"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Vai vēlaties mēģināt savienoties ar internetu tūlīt?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Gambia"
-msgstr "Gambija"
+msgid "Belgian"
+msgstr "Beļģijas"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Greenland"
-msgstr "Grenlande"
+msgid "Do you have an ISA sound card?"
+msgstr "Vai Jums ir ISA skaņas karte?"
 
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Gibraltar"
-msgstr "Gibraltārs"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Jūsu sistēmā nav atrasts neviens ethernet tīkla adapteris.\n"
+"Nevaru uzstādīt šo savienojuma veidu."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "Windows domēns"
+
+#: ../../common.pm:1
 #, c-format
-msgid "Ghana"
-msgstr "Gana"
+msgid "Can't make screenshots before partitioning"
+msgstr "Nevar izveidot ekrāna attēlus pirms sadaļu izveides"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "French Guiana"
-msgstr "Franču Gviāna"
+msgid "Host Name"
+msgstr "Hosta vārds:"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Georgia"
-msgstr "Gruzija"
+msgid "/File/Save _As"
+msgstr "/Fails/Saglabāt _kā"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Grenada"
-msgstr "Grenāda"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "United Kingdom"
-msgstr "Apvienotā Karaliste"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s nav atrodams skeneru datubāzē, vai konfigurēt manuāli?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Gabon"
-msgstr "Gabona"
+msgid "Delay before booting default image"
+msgstr "Pauze pirms noklusētās sistēmas ielādes"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Faroe Islands"
-msgstr "Farēru salas"
+msgid "Restrict command line options"
+msgstr "Ierobežot komandrindas opcijas"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Micronesia"
-msgstr "Mikronēzija"
+msgid "East Europe"
+msgstr "Austrumeiropa"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Folklendu salas"
+msgid "Use free space"
+msgstr "Izmantot brīvo vietu"
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Fiji"
-msgstr "Fidži"
+msgid "use dhcp"
+msgstr "izmantot dhcp"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Finland"
-msgstr "Somija"
+msgid "Mail alert"
+msgstr "Pasta trauksme"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Ethiopia"
-msgstr "Etiopija"
+msgid "Internet configuration"
+msgstr "Interneta konfigurācija"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Spain"
-msgstr "Spānija"
+msgid "Uzbekistan"
+msgstr "Uzbekistāna"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Eritrea"
-msgstr "Eritreja"
+msgid "Detected %s"
+msgstr "Atklāts %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Automātiska noteikšana"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid "Western Sahara"
-msgstr "Rietumsahāra"
+msgid "Finish"
+msgstr "Beigt"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Egypt"
-msgstr "Ēģipte"
+msgid "Show automatically selected packages"
+msgstr "Parādīt automātiski izvēlētās pakotnes"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Estonia"
-msgstr "Igaunija"
+msgid "CPU flags reported by the kernel"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Ecuador"
-msgstr "Ekvadora"
+msgid "Togo"
+msgstr "Togo"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Algeria"
-msgstr "Alžīrija"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Kaut kas neizdevās - vai mkisofs ir instalēts?"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Dominican Republic"
-msgstr "Dominikas Republika"
+msgid "16 MB"
+msgstr "16 MB"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dominica"
-msgstr "Dominika"
+msgid "Please try again"
+msgstr "Lūdzu mēģiniet vēlreiz"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Denmark"
-msgstr "Dānija"
+msgid "The model is correct"
+msgstr "Modelis ir pareizs"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Djibouti"
-msgstr "Džibuti"
+msgid "FAT resizing failed: %s"
+msgstr "FAT izmēra maiņa neizdevās: %s"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Cyprus"
-msgstr "Kipra"
+msgid "Individual package selection"
+msgstr "Atsevišķu pakotņu izvēle"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Christmas Island"
-msgstr "Ziemsvētku sala"
+msgid "This partition is not resizeable"
+msgstr "Šīs sadaļas izmēru nevar izmainīt"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Cape Verde"
-msgstr "Kabovarde"
+msgid "Location"
+msgstr "Atrašanās vieta"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "USA (cable-hrc)"
+msgstr "USA (cable-hrc)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Colombia"
-msgstr "Kolumbija"
+msgid "Journalised FS"
+msgstr "Žurnalēta FS"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cameroon"
-msgstr "Kamerūna"
+msgid "Guatemala"
+msgstr "Gvatemala"
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(pie šī datora)"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Chile"
-msgstr "Čīle"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS iekārtas burts: %s (tikai minējums)\n"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Atzīmējiet failus vai direktorijus un klikšķiniet uz 'Pievienot'"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cook Islands"
-msgstr "Kuka salas"
+msgid "Bahrain"
+msgstr "Bahreina"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Cote d'Ivoire"
-msgstr "Kotdivuāra"
+msgid "omit scsi modules"
+msgstr "izlaist scsi moduļus"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Switzerland"
-msgstr "Šveice"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
 msgstr ""
+"Jūsu tīkls jau ir nokonfigurēts, jo veicat tīkla instalāciju.\n"
+"Klikšķiniet uz Labi, lai paturētu konfigurāciju, vai uz Atlikt, lai "
+"konfigurētu Internet un tīkla savienojumu.\n"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Central African Republic"
-msgstr "Centrāl Āfrikas republika"
+msgid "Keyboard layout: %s\n"
+msgstr "Tastatūras izkārtojums: %s\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosu salas"
+msgid "Maltese (US)"
+msgstr "Maltese (US)"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Canada"
-msgstr "Kanāda"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Mounts un unmounts ir Tīkla Failu sistēmas (NFS), SMB (Lan\n"
+"Manager/Windows) un NCP (NetWare) montēšanas punkti."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "Beliza"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Tvcard"
+msgstr "TV karte"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Belarus"
-msgstr "Baltkrievija"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Pārslēgt normālajā režīmā"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Botswana"
-msgstr "Botsvāna"
+msgid "Size"
+msgstr "Izmērs"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet Island"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Bhutan"
-msgstr "Butāna"
+msgid "Greenland"
+msgstr "Grenlande"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Bahamas"
-msgstr "Bahamu salas"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Brazil"
-msgstr "Brazīlija"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Bolivia"
-msgstr "Bolīvija"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Interneta savienojuma koplietošana jau ir uzstādīta.\n"
+"Pašlaik tā ir ieslēgta.\n"
+"\n"
+"Ko jūs vēlaties darīt?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Brunei Darussalam"
-msgstr "Bruneja"
+msgid "Delete All NBIs"
+msgstr "Izdzēst visus NBI"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Bermuda"
-msgstr "Bermundu salas"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Benin"
-msgstr "Benina"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Kuru XFree konfigurāciju izvēlaties?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Bahrain"
-msgstr "Bahreina"
+msgid "More"
+msgstr "Vairāk"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Bulgaria"
-msgstr "Bulgārija"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Ar šo drošības līmeni sistēmu var sākt izmantot kā serveri.\n"
+"Drošība tagad ir pietiekoši stipra, lai izmantotu sistēmu kā serveri, kas\n"
+"apkalpo savienojumus no daudziem klientiem. Piezīme: ja jūsu dators "
+"darbojas\n"
+"tikai kā klients Internetā, Jums vajadzētu izvēlēties mazāku drošības līmeni."
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Account Password"
+msgstr "Konta parole"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bangladesh"
-msgstr "Bangladeša"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Jūs nolēmāt sāknētāju instalēt uz diska sadaļas.\n"
+"Tas paredz, ka jums jau ir sāknētājs uz tā sāknējamā cietā diska (piem.: "
+"System Commander).\n"
+"\n"
+"Kurš ir jūsu sāknējamais disks?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Barbados"
-msgstr "Barbadosa"
+msgid "Tajik keyboard"
+msgstr "Tadžiku tastatūra"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnija Hercogovina"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaidžāna"
+msgid "Font List"
+msgstr "Fontu saraksts"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Izskatās, ka Jums ir nezināmas izcelsmes dators,\n"
+"yaboot ielādētājs nedarbosies.\n"
+"Instalēšana turpināsies, bet Jums būs jāizmanto\n"
+"BootX, lai ielādētu datoru"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Australia"
-msgstr "Austrālija"
+msgid "Select file"
+msgstr "Izvēlieties failu"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "American Samoa"
-msgstr "Amerikāņu Samoa"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Argentina"
-msgstr "Argentīna"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Antarctica"
-msgstr "Antarktīda"
+msgid "Japan"
+msgstr "Japāna"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "Print option list"
+msgstr "Printera opciju saraksts"
 
-#: ../../lang.pm:1
+#: ../../standalone/localedrake:1
+#, fuzzy, c-format
+msgid "The change is done, but to be effective you must logout"
+msgstr "Izmaiņa ir notikusi, bet, lai to padarītu efektīvu, Jums jāatslēdzas."
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Netherlands Antilles"
-msgstr "Holandes Antiļas"
+msgid "Search servers"
+msgstr "Meklēšanas serveri"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Armenia"
-msgstr "Armēnija"
+msgid "NCP queue name missing!"
+msgstr "Trūkst NCP rindas vārds!"
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Albania"
-msgstr "Albānija"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Anguilla"
-msgstr "Angilja"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom ar nosaukumu \"%s\""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigva un Barbuda"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Saglabā un atjauno sistēmas entropijas krātuvi, lai ģenerētu\n"
+"kvalitatīvākus gadījumskaitļus."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "United Arab Emirates"
-msgstr "Apvienotie Arābu Emirāti"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"Neizdevās pārbaudīt failsistēmu %s. Vai vēlaties labot kļūdas? (uzmanieties, "
+"jūs varat zaudēt datus)"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Andorra"
-msgstr "Andora"
+msgid "Turn your computer into a reliable server"
+msgstr "Pārvērtiet Jūsu datoru par drošu serveri"
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Afghanistan"
-msgstr "Afganistāna"
+msgid " (driver %s)"
+msgstr " (draiveris %s)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+"   %s\n"
+msgstr ""
+"Loopback fails(i):\n"
+"   %s\n"
 
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cikliski montēšanas punkti %s\n"
+msgid "I don't know"
+msgstr "Nezinu"
 
-#: ../../lvm.pm:1
-#, fuzzy, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Vispirms noņemiet loģiskos sējumus\n"
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP resurss \"%s\", ports %s"
 
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
-"PCMCIA atbalsts 2.2 kodoliem vairs nepastāv. Lūdzu izmantojiet 2.4 kodolu."
 
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "PAKUSTINIET RITENI!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Jūsu karte petreiz izmanto %s\"%s\" draiveri (noklusētais draiveris priekš "
+"Jūsu kartes ir \"%s\")"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "To activate the mouse,"
-msgstr "Lai aktivizētu peli,"
+msgid "Post Uninstall"
+msgstr "Pēc atinstalēšanas"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Please test the mouse"
-msgstr "Lūdzu notestējiet peli"
+msgid " ("
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Nav peles"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Drošības līmenis"
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "none"
-msgstr "neviens"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongoļu (kirilica)"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "3 buttons"
-msgstr "3 pogas"
+msgid "Add a module"
+msgstr "Pievienot moduli"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "2 buttons"
-msgstr "2 pogas"
+msgid "Profile to delete:"
+msgstr "Dzēšamais profils:"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "1 button"
-msgstr "1 poga"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Lokālie faili"
 
 #: ../../mouse.pm:1
 #, c-format
 msgid "busmouse"
 msgstr "busmouse"
 
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Konta nosaukums (lietotāja vārds)"
 
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (seriāla, vecs C7 tips)"
+msgid "Fdiv bug"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
+"drakfirewall konfigurators\n"
+"\n"
+"Pārliecinieties, kas nokonfigurējāt tīkla/Internet piekļuvi ar\n"
+"drakconnect, pirms doties tālāk."
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Benin"
+msgstr "Benina"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Uruguay"
+msgstr "Urugvaja"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Path selection"
+msgstr "Ceļa izvēle"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Name/IP address of host:"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Monitors: %s\n"
 
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
 #, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Printer host name or IP missing!"
+msgstr "Nav printera resursa vārda vai IP!"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Parasta 3 pogu pele"
+msgid "Please check all users that you want to include in your backup."
+msgstr "Lūdzu atzīmējiet visus lietotājus, kurus vēlaties iekļaut dublēšanā."
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Parasta 2 pogu pele"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
+"Šis %s skeneris jākonfigurē ar printerdrake.\n"
+"Jūs varat palaist printerdrake no Mandrake kontroles centra Aparatūras "
+"sekcijā."
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "serial"
-msgstr "seriāla"
+msgid "Bangladesh"
+msgstr "Bangladeša"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Japan (cable)"
+msgstr "Japan (cable)"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Wheel"
-msgstr "Ritenis"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Generic"
-msgstr "Vispārēja"
+msgid "Initial tests"
+msgstr "Sākotnējās pārbaudes"
 
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Continue"
+msgstr "Turpināt"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Custom Restore"
+msgstr "Pielāgota atjaunošna"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Parasta PS2 Wheel pele"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Script-based"
+msgstr "Ar skriptu"
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "Standard"
-msgstr "Standarta"
+msgid "Error reading file %s"
+msgstr "Kļūda, nolasot failu %s"
 
-#: ../../mouse.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - pele"
+msgid "PLL setting:"
+msgstr "PLL uzstādījums:"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
 #, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Sakārtots vienā sarakstā vai pa grupām"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Jums ir nepieciešama /boot/efi montēta FAT sadaļa"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Collapse Tree"
-msgstr "Sakļaut koku"
+msgid " on "
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Expand Tree"
-msgstr "Izvērst koku"
+msgid "The URL must begin with http:// or https://"
+msgstr "URL ir jāsākas ar http:// vai https://"
 
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"Jūs varat norādīt tiešu URI, lai piekļūtu printerim. URI pilnībā jāatbilst "
+"CUPS vai Foomatic specifikācijām. Ņemiet vērā, ka ne visi URI tipi atbilst "
+"atbalstītajiem drukas spolētājiem."
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Is this correct?"
-msgstr "Vai tas ir pareizi?"
+msgid "Other OS (SunOS...)"
+msgstr "Cita OS (SunOS...)"
 
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Instalēt/Atjaunināt"
 
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Error writing to file %s"
-msgstr "Kļūda, ierakstot failā %s"
+msgid "%d packages"
+msgstr "%d pakotnes"
 
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Bad backup file"
-msgstr "Slikts rezerves kopijas fails"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default             : save default directories.\n"
+"--debug               : show all debug messages.\n"
+"--show-conf           : list of files or directories to backup.\n"
+"--config-info         : explain configuration file options (for non-X "
+"users).\n"
+"--daemon              : use daemon configuration. \n"
+"--help                : show this message.\n"
+"--version             : show version number.\n"
+msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Atjaunošana no faila %s neizdevās: %s"
+msgid "Domain Authentication Required"
+msgstr "Nepieciešama Domain autentikācija"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
-"Jūsu diska sadaļu tabulā ir caurums, bet es to nevaru izmantot.\n"
-"Vienīgais risinājums ir pārvietot primāras sadaļas tā, lai caurums atrastos "
-"blakus paplašinātajām sadaļām."
 
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Šai platformai paplašinātā sadaļa nav pieejama"
+msgid "Costa Rica"
+msgstr "Kostarika"
 
-#: ../../partition_table.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "mount failed: "
-msgstr "montēšana neizdevās: "
+msgid "Use libsafe for servers"
+msgstr "Lietot libsafe priekš serveriem"
 
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "maybe"
-msgstr "varbūt"
+msgid "Icelandic"
+msgstr "Islandes"
 
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "nice"
-msgstr "derīga"
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
 
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "very nice"
-msgstr "ļoti derīga"
+msgid "Please relog into %s to activate the changes"
+msgstr "Lai aktivizētu izmaiņas, lūdzu aizveriet un atveriet %s sesiju"
 
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
 #, c-format
-msgid "important"
-msgstr "svarīga"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
 
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "must have"
-msgstr "nepieciešama"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub režīms"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nepietiek diska sadaļu RAID līmenim %d\n"
+msgid "Output"
+msgstr "Izvade"
 
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "mkraid failed"
-msgstr "mkraid neizdevās"
+msgid "Circular mounts %s\n"
+msgstr "Cikliski montēšanas punkti %s\n"
 
-#: ../../raid.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neizdevās (varbūt nav uzstādīti raidtools?)"
+msgid "Martinique"
+msgstr "Martinika"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nevar pievienot sadaļu _formatētam_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr "Cietais disks / NFS"
 
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Stop"
-msgstr "Apturēt"
+msgid "a number"
+msgstr "numurs"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Start"
-msgstr "Startēt"
+msgid "Swedish"
+msgstr "Zviedrijas"
 
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "On boot"
-msgstr "Sāknēšanas laikā"
+msgid "Which %s driver should I try?"
+msgstr "Kuru %s draiveri pamēģināt?"
 
-#: ../../services.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
 msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
 msgstr ""
-"Nav papildus informācijas\n"
-"par šo servisu."
+"Jūs saņemsit trauksmes signālu, ja kāds no izvelētajiem servisiem vairs "
+"nedarbojas"
 
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Services and deamons"
-msgstr "Servisi un dēmoni"
+msgid "Filesystem types:"
+msgstr "Failsistēmu tipi:"
 
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "stopped"
-msgstr "apturēts"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", daudzfunkcionāla ierīce pie HP JetDirect"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "running"
-msgstr "darbojas"
+msgid "Northern Mariana Islands"
+msgstr "Zemeļmarianas salas"
 
-#: ../../services.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izvēlēties, kurus servisus vajag automātiski startēt ielādes laikā"
+msgid "none"
+msgstr "neviens"
 
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Database Server"
-msgstr "Datubāzu serveris"
+msgid "user :"
+msgstr "lietotājs :"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Remote Administration"
-msgstr "Attāla administrēšana"
+msgid "Please enter your password"
+msgstr "Lūdzu, ievadie Jūsu paroli"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "File sharing"
-msgstr "Failu koplietošana"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
+"Profila vārds, ko izveidot (jaunais profils tiks izveidots, kā kopija no "
+"patreizējā):"
 
-#
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Saglabāt disketē"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Internet"
-msgstr "Internets"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Lūdzu atzīmējiet, ja vēlaties izdzēst RW mēdiju (1. sesiju)"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Ghostscript referencing"
+msgstr "Ghostscript atsauksmes"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "Kuru OS ielādētāju lietot"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printing"
-msgstr "Drukāšana"
+msgid "Move"
+msgstr "Pārvietot"
 
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startē X fontu serveri (obligāti, lai izpildītu XFree)."
+msgid "Bootloader to use"
+msgstr "Kuru OS ielādētāju lietot"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Ielādē draiverus jūsu usb ierīcēm."
+msgid "SMB server host"
+msgstr "SMB servera resurss"
 
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "Samba serveris"
+
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
 msgstr ""
-"Syslog ir mehānisms, ko daudzi demoni izmanto ziņojumu grāmatošanai\n"
-"daudzos sistēmas žurnālu failos. Ir gudra doma vienmēr darbināt syslog."
+"\n"
+"Brīdinājums\n"
+"\n"
+"Lūdzu rūpīgi izlasiet zemāk esošos nosacījumus. Ja jūs nepiekrītat kādai\n"
+"to daļai, jūs nedrīkstat instalēt no šī CD. Nospiediet 'Noraidīt', lai\n"
+"turpinātu instalēšanu, neizmantojot šo datu nesēju.\n"
+"\n"
+"\n"
+"Daži šajā CD datu nesējā esošie komponenti nav pakļauti GPL licencei vai\n"
+"līdzīgiem līgumiem. Katra šāda komponenta izmantošanu nosaka atsevišķas\n"
+"licences noteikumi un nosacījumi. Lūdzu rūpīgi to izlasiet un ievērojiet\n"
+"tās nosacījumus, pirms izmantot vai izplatīt uzskaitītos komponentus.\n"
+"Šīs licences pārsvarā aizliegs jums pārsūtīt, dublēt (izņemot rezerves\n"
+"kopēšanas nolūkus), izplatīt tālāk, reversi uzbūvēt, de-asamblēt,\n"
+"de-kompilēt vai modificēt šo kompomentu. Jebkurš šīs vienošanās pārkāpums\n"
+"jums automātiski atņems tiesības, ko piešķīrusi attiecīgā licence. Izņemot\n"
+"gadījumus, kad konkrētas licences nosacījumi jums dod šādas tiesības, jūs\n"
+"parasti nedrīkstat instalēt šādu programmu uz vairāk, kā vienas sistēmas\n"
+"vai pielāgot to izmantošanai tīklā. Ja šaubaties, lūdzu sazinieties ar\n"
+"komponenta izplatītāju vai redaktoru.\n"
+"Šādu komponentu, tajā skaitā arī iekļautās dokumentācijas, nodošana\n"
+"trešajām personām vai kopēšana parasti ir aizliegta.\n"
+"\n"
+"\n"
+"Visas nākamajā CD datu nesējā iekļauto komponentu tiesības pieder to\n"
+"attiecīgajiem autoriem, un tās aizsargā intelektuālā īpašuma un\n"
+"autortiesību likumi, kas attiecas uz programnodrošinājumu.\n"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Palaist skaņusistēmu uz Jūsu datora"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Noņemt šo printeri no Star Office/OpenOffice.org/GIMP"
 
 #: ../../services.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"Protokols rwho attāliem lietotājiem ļauj saņemt visu atvērto lietotāju\n"
-"sesiju sarakstu no datora, kurā darbojas rwho demons (līdzīgi finger)."
+"Linux virtuālais serveris, lietojams, lai uzbūvētu augstas veiktspējas\n"
+"un augstas pieejamības serveri."
 
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokols rusers tīkla lietotājiem ļauj noskaidrot, kuru lietotāju\n"
-"sesijas ir atvērtas citos atbildošajos datoros."
+msgid "4 billion colors (32 bits)"
+msgstr "4 miljardi krāsu (32 biti)"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokols ļauj tīkla lietotājiem saņemt veiktspējas\n"
-"informāciju par jebkuru šī tīkla datoru."
+msgid "Micronesia"
+msgstr "Mikronēzija"
 
-#: ../../services.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed demons ļauj automātiski atjaunināt IP maršrutizatora tabulu,\n"
-"izmantojot RIP protokolu. Kaut gan RIP tiek plaši izmantots nelielos\n"
-"tīklos, sarežģītākiem tīkliem ir nepieciešami sarežģītāki maršrutizēšanas\n"
-"protokoli."
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+msgid "License"
 msgstr ""
-"Piešķirt tiešās ierīces bloku ierīcēm (tādām, kā cietā\n"
-"diska sadaļas), lai lietotu tādās aplikācijās, kā Oracle"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Saglabā un atjauno sistēmas entropijas krātuvi, lai ģenerētu\n"
-"kvalitatīvākus gadījumskaitļus."
+msgid "This may take a moment to generate the keys."
+msgstr "Var paiet kāds brīdis, kamēr ģenerējas atslēgas."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ir Pasta transporta aģents, un tā ir programma, kas pārvieto pastu "
-"no viena datora uz citu."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Printeru automātiska noteikšana (lokāli, TCP/Socket un SMB printeri)"
 
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "Sagem (using pppoa) usb"
 msgstr ""
-"portmapper apkalpo RPC savienojumus, ko izmanto citi protokoli,\n"
-"piemēram, NFS un NIS. portmap serveri ir jāizmanto datoros, kas\n"
-"darbojas kā RPC protokolus izmantojošu protokolu serveri."
 
-#: ../../services.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
 msgstr ""
-"PCMCIA atbalsts parasti ir paredzēts, piemēram, tīkla karšu un modēmu\n"
-"uzturēšanai pārnēsājamos datoros. Tas netiks startēts, ja nav konfigurēts,\n"
-"tāpēc ir droši to instalēt datoros, kam tas nav nepieciešams."
+"Atklāta kļūda - nav atrasta neviena ierīce, kas derētu jaunu failsistēmu "
+"veidošanai. Lūdzu pārbaudiet dzelžus, lai noskaidrotu problēmas iemeslu"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Atbalsta OKI 4w un savietojamus winprinterus."
+msgid "Starting the printing system at boot time"
+msgstr "Startēju printēšnas sistēmu pie ielādes"
 
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
+msgid "Do you want to start the connection at boot?"
+msgstr "Vai vēlaties startēt savienojumu palaišanas laikā?"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+msgid "Processor ID"
 msgstr ""
-"NFS ir populārs protokols failu koplietošanai TCP/IP tīklos.\n"
-"Šis serviss nodrošina NFS failu aizslēgšanas funkcionalitāti."
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Sound trouble shooting"
 msgstr ""
-"NFS ir populārs protokols failu koplietošanai TCP/IP tīklos.\n"
-"Šis serviss nodrošina NFS servera funkcionalitāti, un to var konfigurēt\n"
-"ar faila /etc/exports palīdzību."
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivizē/Deaktivizē visus tīkla interfeisus, kas ir konfigurēti\n"
-"startēšanai sistēmas sāknēšanas laikā."
+msgid "Polish (qwerty layout)"
+msgstr "Polijas (qwerty izvietojums)"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mounts un unmounts ir Tīkla Failu sistēmas (NFS), SMB (Lan\n"
-"Manager/Windows) un NCP (NetWare) montēšanas punkti."
+msgid "activate now"
+msgstr "aktivizēt"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
 msgstr ""
-"named (BIND) ir domēnu vārdu serveris (DNS), kas tiek izmantots hostu "
-"vārdiem atbilstošo IP adrešu noskaidrošanai."
+"\n"
+"Drakbackup aktivitātes caur CD:\n"
+"\n"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
 msgstr ""
-"Linux virtuālais serveris, lietojams, lai uzbūvētu augstas veiktspējas\n"
-"un augstas pieejamības serveri."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ir drukas demons, kas ir nepieciešams lpr pareizai darbībai. Tas ir\n"
-"serveris, kas nosūta drukas uzdevumus printeri(e)m."
+msgid "Host \"%s\", port %s"
+msgstr "Hosts \"%s\", ports %s"
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf dažreiz piemēros dažādus uzdevumus \n"
-"ielādes laikā, lai uzturētu sistēmas konfigurāciju."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "This partition can't be used for loopback"
+msgstr "Šo sadaļu nevar izmantot priekš loopback"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automātiska dzelžu noteikšana un konfigurēšana sāknēšanas laikā."
+msgid "File already exists. Use it?"
+msgstr "Fails jau eksistē. Vai to izmantot?"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "received: "
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Šī pakotne ielādē izvēlēto tastatūras karti, kas norādīta failā\n"
-"/etc/sysconfig/keyboard. To var izvēlēties, izmantojot programmu kbdconfig.\n"
-"Vairumā gadījumu šo pakotni ir jāatstāj izvēlētu."
+msgid "Right Alt key"
+msgstr "Labais Alt taustiņs"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
+msgid "the list of alternative drivers for this sound card"
+msgstr "šīs skaņu kartes alternatīvo draiveru saraksts"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneta superservera demons (parasti saukts par inetd) pēc vajadzības\n"
-"startē dažādus interneta servisus. Tas it atbildīgs par daudzu servisu\n"
-"startēšanu, tajā skaitā telnet, ftp, rsh un rlogin. inetd atslēgšana\n"
-"atslēdz arī visus servisus, par kuriem tas atbild."
+msgid "Gateway"
+msgstr "Vārteja"
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Failu koplietošana"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ir Vispasaules tīmekļa (WWW) serveris. Tas tiek izmantots HTML\n"
-"failu un CGI izplatīšanai."
+msgid "Tonga"
+msgstr "Tonga"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake veic aparatūras aptauju, un opcionāli konfigurē\n"
-"jauno/izmainīto aparatūru."
+msgid "Tunisia"
+msgstr "Tunisija"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM nodrošina peles atbalstu dažādām teksta režīma Linux programmām,\n"
-"piemēram, Midnight Commander. Tas arī ļauj no konsoles ar peli veikt\n"
-"izgriezt-un-iespraust operācijas, kā arī piedāvā izlecošo izvēlņu\n"
-"atbalstu konsolei."
+msgid "Profile: "
+msgstr "Profils: "
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
 msgstr ""
-"cron ir parasta UNIX programma, kas palaiž lietotāju norādītās programmas\n"
-"periodiski ieplānotos laikos. vixie cron piedāvā virkni papildus\n"
-"iespēju salīdzinot ar UNIX cron, tajā skaitā arī labāku drošību un daudz\n"
-"izvērtstākas konfigurēšanas iespējas."
 
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Palaiž komandas, kas ir ieplānotas noteiktā laikā, izmantojot at komandu,\n"
-"kā arī palaiž komadu paketes, kad vidējā sistēmas noslodze ir pietiekoši\n"
-"zema."
+msgid "XawTV isn't installed!"
+msgstr "XawTV nav instalēts!"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
 msgstr ""
-"apmd paredzēts baterijas stāvokļa novērošanai un grāmatošanai ar syslog.\n"
-"To var izmantot arī datora izslēgšanai, kad baterija ir izlādēta."
+"Izveidot/pārlikt\n"
+"dublēšanas atslēgas priekš SSH"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron ir periodisku komandu plānotājs."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Neiekļaut kritiskos failus (passwd, group, fstab)"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Palaist ALSA (Advanced Linux Sound Architecture) skaņu sistēmu"
+msgid "old static device name used in dev package"
+msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installing packages..."
-msgstr "Instalēju pakotnes..."
+msgid "This label is already used"
+msgstr "Šis nosaukums jau ir izmantots"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr ""
+"Pēc sadaļas %s formatēšanas visi šajā sadaļā esošie dati tiks pazaudēti"
 
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Savienojuma tips: "
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
+msgid "select perm file to see/edit"
+msgstr "izvēlieties perm failu apskatei/rediģēšanai"
 
-#: ../../standalone.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
 msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
 msgstr ""
+"Lūdzu ielieciet instalācijas Cd-Rom un nospiediet Labi, kad tas izdarīts.\n"
+"Ja jums nav šī diska, nospiediet Atcelt, lai neuzsāktu uzlabošanu no tīkla."
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
+msgid "Use group id for execution"
+msgstr "Lietot grupas id izpildei"
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "Choose the default user:"
+msgstr "Norādiet noklusēto lietotāju:"
 
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Gabon"
+msgstr "Gabona"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Tastatūra"
-
-#: ../../standalone.pm:1
-#, c-format
 msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
+"\n"
+"Šeit jums NAV jākonfigurē attāla CUPS servera printeri; šie printeri tiks "
+"noteikti automātiski."
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "Jūs varat izvēlēties citas valodas, kas būs pieejamas pēc instalēšanas"
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
-msgstr ""
+msgid "Domain"
+msgstr "Domēns"
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Ja nepieciešams, precizējiet RAM apjomu (atrasti %d MB)"
 
-#: ../../standalone.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
 msgstr ""
 
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Exit install"
-msgstr "Instalēšanas beigas"
+msgid "Provider dns 2 (optional)"
+msgstr "Provaidera dns 2 (nav obligāti)"
 
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Sistēmas jauninājumu instalēšana"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Boot device"
+msgstr "Sāknējamā ierīce"
 
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure services"
-msgstr "Servisu konfigurēšana"
+msgid "Which partition do you want to resize?"
+msgstr "Kuras sadaļas izmēru vēlaties izmainīt?"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "United States Minor Outlying Islands"
+msgstr "ASV mazsvarīgās nomaļās salas"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Configure X"
-msgstr "X konfigurēšana"
+msgid "A tool to monitor your logs"
+msgstr "Rīks žurnālu pārlūkošanai"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Install bootloader"
-msgstr "Sāknētāja instalēšana"
+msgid "Djibouti"
+msgstr "Džibuti"
 
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Configure networking"
-msgstr "Tīkla konfigurēšana"
+msgid "detected on port %s"
+msgstr "atklāts uz porta %s"
 
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Add a user"
-msgstr "Lietotāju pievienošana"
+msgid "LPD"
+msgstr "LPD"
 
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Root password"
-msgstr "Bez paroles"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphics card: %s\n"
+msgstr "Grafiskā karte: %s\n"
 
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Install system"
-msgstr "Sistēmas instalēšana"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "Instalējamo pakotņu izvēle"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Lūdzu atzīmējiet, ja lietojat DVDRAM ierīci"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Format partitions"
-msgstr "Diska formatēšana"
+msgid "Splash selection"
+msgstr ""
 
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Drukāšana"
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Extended partition not supported on this platform"
+msgstr "Šai platformai paplašinātā sadaļa nav pieejama"
 
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Choose your keyboard"
-msgstr "Tastatūras izvēle"
+msgid "ISDN Configuration"
+msgstr "ISDN konfigurācija"
 
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select installation class"
-msgstr "Instalēšanas klases izvēle"
+msgid "high"
+msgstr "augsts"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "Cietā diska noteikšana"
+msgid "Internet Connection Sharing"
+msgstr "Interneta savienojuma koplietošana"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Configure mouse"
-msgstr "Peles konfigurēšana"
+msgid "Choose file"
+msgstr "Izvēlieties failu"
 
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "License"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
 msgstr ""
+"Brīdinājums! Ir atklāta eksistējoša ugunsmūra konfigurācija. Pēc "
+"instalēšanas jums varbūt vajadzēs patstāvīgi pielabot konfigurāciju."
 
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Language"
-msgstr "Valodas izvēle"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Drukāšana/piekļuve foto kartēm uz \"%s\""
 
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "utopia 25"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
 msgstr ""
+"Vai vēlaties atļaut drukāšanu uz augstāk minētajiem printeriem, vai uz "
+"printeriem lokālajā tīklā?\n"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "OK"
-msgstr "Labi"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Printera modeļa izvēle"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Parasta PS2 Wheel pele"
 
-#: ../../ugtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Removing old printer \"%s\"..."
+msgstr "Noņemu veco printeri \"%s\"..."
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalācijas displeja draiveris)"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Izvēlieties skeneri"
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Jūsu karte spēj nodrošināt 3D akselerāciju ar XFree %s.\n"
-"ŅEMIET VĒRĀ, KA TAS IR EKSPERIMENTĀLS ATBALSTS, KAS VAR UZKĀRT DATORU."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr " Noņemt atzīmētos"
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ar EKSPERIMENTĀLU aparatūras 3D akselerāciju"
+msgid "French Southern Territories"
+msgstr "Franču dienvidu teritorijas"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the vendor name of the processor"
+msgstr "ierīces pārdevēja nosaukums"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Jūsu karte spēj nodrošināt 3D akselerāciju ar XFree %s."
+msgid "All data on this partition should be backed-up"
+msgstr "Visiem šīs sadaļas datiem jāizveido rezerves kopijas"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ar aparatūras 3D akselerāciju"
+msgid "Installing package %s"
+msgstr "Instalēju pakotni %s"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Checking device and configuring HPOJ..."
 msgstr ""
-"Jūsu karte spēj nodrošināt 3D akselerāciju, bet tikai ar XFree %s,\n"
-"ŅEMIET VĒRĀ, KA TAS IR EKSPERIMENTĀLS ATBALSTS, KAS VAR UZKĀRT DATORU.\n"
-"Jūsu karti uztur XFree %s, kam var būt labāks 2D atbalsts."
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
 msgstr ""
-"Jūsu karte spēj nodrošināt 3D akselerāciju, bet tikai ar XFree %s.\n"
-"Jūsu karti uztur XFree %s, kam var būt labāks 2D atbalsts."
+"Ja gribat vairāk sadaļas, izdzēsiet kādu sadaļu, lai varētu izveidot "
+"paplašināto sadaļu"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigurāt tikai karti \"%s\"%s"
+msgid "Choose packages to install"
+msgstr "Instalējamo pakotņu izvēle"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use Xinerama extension"
-msgstr "Lietot Xinerama piebūvi"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" dažas kļūdas pasta sūtīšanas laikā notiek sliktas\n"
+" postfix konfigurācijas dēļ. Lai to atrisinātu, Jums\n"
+" jāiestāda myhostname jeb mydomain failā\n"
+" /etc/postfix/main.cf\n"
+"\n"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigurēt visus ekrānus neatkarīgi"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "VISAS diska %s sadaļas un tajās esošie dati tiks pazaudēti"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kuru XFree konfigurāciju izvēlaties?"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Jūsu sistēmā vairs nav brīvas vietas instalēšanai vai uzlabošanai (%d > %d)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "XFree konfigurācija"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Katram printerim nepieciešams vārds (piemēram, \"printeris\"). Apraksta un "
+"Atrašanās vietas laukus nav nepieciešams aizpildīt, tie ir kā komentāri "
+"lietotājiem."
 
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Izvēlieties grafiskās kartes atmiņas apjomu"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
 msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
 msgstr ""
-"Jūsu sistēma atbalsta n-ekrānu konfigurāciju.\n"
-"Ko nu darīsim?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Multi-head configuration"
-msgstr "N-ekrānu konfigurācija"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Izvēlieties X serveri"
+msgid "Bhutan"
+msgstr "Butāna"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "X server"
-msgstr "X serveris"
+msgid "Network interface"
+msgstr "Tīkla interfeiss"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64 MB vai vairāk"
+msgid "Reading printer data..."
+msgstr "Nolasu printera datus..."
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Korean keyboard"
+msgstr "Korejiešu tastatūra"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Not connected"
+msgstr "Nav savienots"
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Greek"
+msgstr "Grieķijas"
 
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Saint Kitts and Nevis"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"Pārvietošana veiksmīga\n"
+"Varbūt Jūs vēlaties pārbaudīt, vai varat pieslēgties serverim ar:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"bez paroles pieprasījuma."
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable OF Boot?"
+msgstr "Atļaut OF ielādi?"
+
+#: ../../fsedit.pm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "JFS nevar izmantot sadaļām, kas mazākas par 16MB"
 
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitora vert. frekv.: %s\n"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Saglabāt izmaiņas?\n"
-"Pašreizējā konfigurācija ir:\n"
-"\n"
-"%s"
+msgid "path"
+msgstr "ceļš"
 
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Options"
-msgstr "Opcijas"
+msgid "Mount point"
+msgstr "Montēšanas punkts"
 
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Test"
-msgstr "Pārbaude"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Resolution"
-msgstr "Izšķirtspēja"
+msgid "Restore system"
+msgstr "Atjaunot sistēmu"
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Monitor"
-msgstr "Monitors"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP end ip"
+msgstr "DHCP beigu diapazons"
+
+#
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Graphic Card"
-msgstr "Grafiskā karte"
+msgid "Another one"
+msgstr "Cits"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikālā frekvence"
+msgid "Drakbackup"
+msgstr "Drakbackup"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontālā frekvence"
+msgid "Colombia"
+msgstr "Kolumbija"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
 "\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
 msgstr ""
-"Divi svarīgākie parametri ir vertikālā pārzīmēšanas frekvence, kas nosaka\n"
-"visa ekrāna pārzīmēšanas biežumu, un horizontālās sinhronizācijas\n"
-"frekvence, kas nosaka skanēšanas līniju parādīšanas biežumu.\n"
+"Patreizējā `%s' konfigurācija:\n"
 "\n"
-"Ir ĻOTI SVARĪGI, lai jūs nenorādītu monitora tipu, kura sinhronizācijas\n"
-"frekvence pārsniedz jūsu monitora iespējas: jūs varat sabojāt savu "
-"monitoru.\n"
-" Ja neesat pārliecināts, izvēlieties konservatīvāko variantu."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Plug'n Play pārbaude neizdevās. Lūdzu, izvēlieties precīzu monitoru"
-
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "Pārdevējs"
+"Tīkls: %s\n"
+"IP adrese: %s\n"
+"IP atribūtika: %s\n"
+"Draiveris: %s"
 
 #: ../../Xconfig/monitor.pm:1
 #, c-format
 msgid "Plug'n Play"
 msgstr "Plug'n Play"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "Norādiet monitoru"
+msgid "Reunion"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "Grafiskā karte: %s"
+msgid "Details"
+msgstr "Detaļas"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Norādiet izšķirtspēju un krāsu dziļumu"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "Tā tiks tagad atslēgta drošības dēļ."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Resolutions"
-msgstr "Izšķirtspējas"
+msgid "Synchronization tool"
+msgstr "Sinhronizēšanas rīks"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardi krāsu (32 biti)"
+msgid "Checking your system..."
+msgstr "Pārbaudu jūsu sistēmu..."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoni krāsu (24 biti)"
+msgid "Print"
+msgstr "Drukāt"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tūkstoši krāsu (16 biti)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tūkstoši krāsu (15 biti)"
+msgid "Mongolia"
+msgstr "Mongolija"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 krāsas (8 biti)"
+msgid "Mounted\n"
+msgstr "Montēta\n"
 
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Vai tas ir pareizi?"
+msgid "Graphical Interface"
+msgstr "X pēc startēšanas"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Users"
+msgstr "Atjaunot lietotājus"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d sekundes"
+msgid "Encryption key for %s"
+msgstr "Šifrēšanas atslēga"
 
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
 msgstr ""
+"portmapper apkalpo RPC savienojumus, ko izmanto citi protokoli,\n"
+"piemēram, NFS un NIS. portmap serveri ir jāizmanto datoros, kas\n"
+"darbojas kā RPC protokolus izmantojošu protokolu serveri."
 
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Brīdinājums: šīs grafiskās kartes izmēģināšana var uzkārt datoru"
-
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Vai vēlaties izmēģināt šo konfigurāciju?"
+msgid "Detected hardware"
+msgstr "Noteiktā aparatūras"
 
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "Konfigurācijas izmēģināšana"
+msgid "Mauritius"
+msgstr "Maurīcija"
 
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "What norm is your TV using?"
-msgstr "Kādu TV standartu jūs izmantojat?"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burmese)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Liekas, ka Jūsu grafiskajai kartei ir TV-OUT savienotājs.\n"
-"To var nokonfigurēt, lai tiktu lietots kadru buferis.\n"
-"\n"
-"Priekš tā Jums jāpievieno Jūsu grafiskā karte pie TV pirms datora "
-"startēšanas.\n"
-"Tad izvēlieties \"TVout\" ierakstu IN THE BOOTLOADER\n"
-"\n"
-"Vai Jums ir šī iespēja?"
+msgid "Enabling swap partition %s"
+msgstr "Formatēju sadaļu %s"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
 msgstr ""
-"Datoru var konfigurēt, lai pēc sistēmas ielādes automātiski startētu X.\n"
-"Vai vēlaties, lai pēc pārstartēšanas tiktu palaists X?"
+"Nav FAT sadaļu, lai izmainīto to izmēru vai izmantotu kā loopback (vai "
+"nepietiek brīvas vietas)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Graphical interface at startup"
-msgstr "X pēc startēšanas"
+msgid "Armenian (old)"
+msgstr "Armēnijas (vecā)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 draiveris: %s\n"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Printeris ar vārdu \"%s\" jau eksistē zem %s. \n"
+"Klikšķiniet uz \"Pārlikt\" lai pārrakstītu to.\n"
+"Jūs varat arī ierakstīt jaunu vārdu, vai izlaist šo printeri."
 
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 serveris: %s\n"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
+"Atrodiet risinājumus Jūsu problēmām caur MandrakeSoft tiešsaistes atbalsta "
+"platformu"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "Izšķirtspēja: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ", hosts \"%s\", ports %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "Krāsu dziļums: %s\n"
+msgid "Monaco"
+msgstr "Monako"
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafiskā atmiņa: %s kB\n"
+msgid "%s formatting of %s failed"
+msgstr "%s formatēšana %s neizdevās"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafiskā karte: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Diska sadalīšana neizdevās: %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitora vert. frekv.: %s\n"
+msgid "Canada (cable)"
+msgstr "Kanāda (kabelis)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitora horiz. frekv.: %s\n"
+msgid "Upgrade"
+msgstr "Atjaunināt"
 
-#: ../../Xconfig/various.pm:1
+#
+#: ../../help.pm:1
 #, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitors: %s\n"
+msgid "Workstation"
+msgstr "Darbastacija"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mouse device: %s\n"
-msgstr "Peles ierīce: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instalēju pakotni %s\n"
+"%d%%"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "Peles tips: %s\n"
+msgid "Kyrgyzstan"
+msgstr "Kirgīzija"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatūras izkārtojums: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Ar pamatdokumentāciju (ieteicams!)"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Options: %s"
-msgstr "Opcijas: %s"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron ir periodisku komandu plānotājs."
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Mount point: "
-msgstr "Montēšanas punkts: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Jums ir nepieciešama saknes sadaļa.\n"
+"Šim nolūkam izveidojiet sadaļu (vai uzklikšķiniet uz jau esošas).\n"
+"Tad izvēlieties darbību ``Montēšanas punkts'' un norādiet, ka tas ir `/'"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Server: "
-msgstr "Serveris:"
+msgid "Proxy should be http://..."
+msgstr "Proxy būtu jābūt http://..."
 
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL ir jāsākas ar http:// vai https://"
+msgid "South Africa"
+msgstr "Dienvidāfrika"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Lūdzu ievadiet WebDAV servera URL"
+msgid "Western Sahara"
+msgstr "Rietumsahāra"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Mount point"
-msgstr "Montēšanas punkts"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Server"
-msgstr "Serveris"
+msgid "Modify printer configuration"
+msgstr "Izmainīt printera konfigurāciju"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mount"
-msgstr "Montēta"
+msgid "Choose a partition"
+msgstr "Izvēlieties sadaļu"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Unmount"
-msgstr "Nomontēt"
+msgid "Edit current rule"
+msgstr "Labot pašreizējo noteikumu"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "New"
-msgstr "Jauns"
+msgid "%s"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
 msgstr ""
-"WebDAV ir protokols, ka ļauj jums lokāli montēt web servera direktoriju\n"
-"un rīkoties ar to kā ar lokālu failsistēmu (ja vien web serveris ir "
-"konfigurēts\n"
-"kā WebDAV serveris). Ja jūs vēlaties pievienot WebDAV montēšanas\n"
-"punktus, izvēlieties \"Jauns\"."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Use ``%s'' instead"
-msgstr "Tā vietā izmantojiet ``%s''"
+msgid "Please test the mouse"
+msgstr "Lūdzu notestējiet peli"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Type"
-msgstr "Tips"
+msgid "Other Media"
+msgstr "Cits mēdijs"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Vispirms izmantojiet ``Nomontēt''"
+msgid "Backup system files"
+msgstr "Atjaunot sistēmas failus"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Delete"
-msgstr "Izdzēst"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Create"
-msgstr "Izveidot"
+msgid "Sector"
+msgstr "Sektors"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Filesystem types:"
-msgstr "Failsistēmu tipi:"
+msgid "Qatar"
+msgstr "Katara"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Empty"
-msgstr "Tukšs"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Jūs nevarat izvēlēties šo pakotni, jo nepietiek vietas tās instalēšanai"
+
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Windows"
-msgstr "Windows domēns"
+msgid "generate auto-install floppy"
+msgstr "Sagatavot auto instalēšanas disketi"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Dialing mode"
+msgstr "Zvanīšanas režīms"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "File sharing"
+msgstr "Failu koplietošana"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "Clean /tmp at each boot"
+msgstr "Iztīrīt /tmp katras sāknēšanas laikā"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Journalised FS"
-msgstr "Žurnalēta FS"
+msgid "Malawi"
+msgstr "Malāvi"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Please choose your type of mouse."
+msgstr "Lūdzu izvēlieties jūsu peles tipu."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "No hard drives found"
-msgstr "Cietņi netika atrasti"
+msgid "class of hardware device"
+msgstr "Aparatūras iekārtas klase"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "Lūdzu uzklikšķiniet uz sadaļas"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
 msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
 msgstr ""
-"Jums ir viena liela FAT sadaļa\n"
-"(parasti to izmanto MicroSoft Dos/Windows).\n"
-"Iesaku vispirms izmainīt šīs sadaļas izmēru\n"
-"(uzklikšķiniet uz tās, tad uz \"Mainīt izmēru\")"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Choose action"
-msgstr "Izvēlieties darbību"
+msgid "United Kingdom"
+msgstr "Apvienotā Karaliste"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Wizard"
-msgstr "Meistars"
+msgid "running"
+msgstr "darbojas"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ja gatavojaties izmantot aboot, neaizmirstiet atstāt brīvu vietu diska\n"
-"sākumā (pietiek ar 2048 sektoriem)"
+msgid "default"
+msgstr "pēc noklusēšanas"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please make a backup of your data first"
-msgstr "Vispirms izveidojiet datu rezerves kopiju"
+msgid "Indonesia"
+msgstr "Indonēzija"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Read carefully!"
-msgstr "Lasiet uzmanīgi!"
+msgid "France [SECAM]"
+msgstr "Francija [SECAM]"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Encryption key (again)"
-msgstr "Šifrēšanas atslēga (vēlreiz)"
+msgid "restrict"
+msgstr "ierobežot"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Encryption key"
-msgstr "Šifrēšanas atslēga"
+msgid "must have"
+msgstr "nepieciešama"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The encryption keys do not match"
-msgstr "Šifrēšanas atslēgas nesakrīt"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS neatbalsta printerus uz Novell serveriem, vai printerus, kas sūta datus "
+"brīvi formētā komandā.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Šifrēšanas atslēga ir pārāk vienkārša (jābūt vismaz %d simbolus garai)"
+msgid "Senegal"
+msgstr "Senegāla"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Domēna nosaukums"
+
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Izvēlieties jūsu failsistēmas šifrēšanas atslēgu"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Filesystem encryption key"
-msgstr "Failsistēmas šifrēšanas atslēga"
+msgid "access to administrative files"
+msgstr "piekļuve administrēšanas failiem"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Type: "
-msgstr "Tips: "
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
+"Kļūda pasta sūtīšanas laikā.\n"
+" Jūsu ziņojuma vēstule netika nosūtīta.\n"
+" Lūdzu, nokonfigurējiet sendmail"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "uz šinas %d id %d\n"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", daudzfunkcionāla ierīce pie paralēlā porta \\/*%s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Partition table type: %s\n"
-msgstr "sadaļu tabulas tips: %s\n"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diski %s\n"
+msgid "Montserrat"
+msgstr "Montserrata"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Automatic dependencies"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ģeometrija: %s cilindri, %s galvas, %s sektori\n"
+msgid "Swap"
+msgstr "Swap"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Savienoties ar Internetu"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Size: %s\n"
-msgstr "Izmērs: %s\n"
+msgid "Restore Other"
+msgstr "Atjaunot citu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Read-only"
-msgstr "Tikai-lasīt"
+msgid "TV card"
+msgstr "TV karte"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Device: "
-msgstr "Ierīce: "
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Printeris uz SMB/Windows 95/98/NT servera"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid ", "
+msgstr ""
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (umask)\n"
 "\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"Set the root umask."
 msgstr ""
-"\n"
-"Šī speciālā Bootstrap\n"
-"sadaļa ir paredzēta jūsu\n"
-"sistēmas duālai sāknēšanai.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr " Noņemt atzīmētos"
+
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
 msgstr ""
-"\n"
-"Pastāv iespēja, ka šī sadaļa\n"
-"ir Draivera sadaļa, ko jums\n"
-"varbūt nevajadzētu aiztikt.\n"
+"Postfix ir Pasta transporta aģents, un tā ir programma, kas pārvieto pastu "
+"no viena datora uz citu."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faila nosaukums: %s"
+msgid "Disconnection from the Internet failed."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID diski %s\n"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Šeit Jūs varat izvēlēties taustiņu vai taustiņu kombināciju,\n"
+"kas Jums ļaus pārslēgties starp dažādiem tastatūras\n"
+"izkārtojumiem (piemēram, latīņu un ne-latīņu)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Tīkla konfigurācija"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Chunk size %s\n"
-msgstr "Gabala izmērs %s\n"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Level %s\n"
-msgstr "Līmenis %s\n"
+msgid "Restore From CD"
+msgstr "Atjanot no CD"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
-"Noklusēti sāknējamā sadaļa\n"
-"    (lai sāknētu MS-DOS, nevis lilo)\n"
+"Jūs taisaties konfigurēt jūsu datoru Interneta savienojuma koplietošanai.\n"
+"Ar šo iespēju datoru var konfigurēt tā, lai kopīgi izmantotu Interneta "
+"savienojumu.\n"
+"\n"
+"Piezīme: jums ir nepieciešams atsevišķs tīkla adapteris, lai uzstādītu "
+"lokālo datortīklu (LAN).\n"
+"\n"
+"Vai vēlaties uzstādīt Interneta savienojuma koplietošanu?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
-"Loopback file(s):\n"
-"   %s\n"
+"Please choose which network adapter you want to use to connect to Internet."
 msgstr ""
-"Loopback fails(i):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+"Lūdzu norādiet, kuru tīkla adapteri vēlaties izmantot Interneta savienojumam."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mounted\n"
-msgstr "Montēta\n"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Not formatted\n"
-msgstr "Neformatēta\n"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Formatted\n"
-msgstr "Formatēta\n"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Internet savienojuma koplietošana tagad ir atslēgta."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "No cilindra %d līdz cilindram %d\n"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ", %s sectors"
-msgstr ", %s sektori"
+msgid "Latin American"
+msgstr "Latīņamerikas"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "Izmērs: %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Drukas sistēmas nomaiņa"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Start: sector %s\n"
-msgstr "Sākums: sektors %s\n"
+msgid "Old device file"
+msgstr "Vecais iekārtas fails"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Name: "
-msgstr "Vārds: "
+msgid "Info: "
+msgstr "Info: "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS iekārtas burts: %s (tikai minējums)\n"
+msgid "Button `%s': %s"
+msgstr "Poga `%s': %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "partition %s is now known as %s"
-msgstr "sadaļa %s tagad ir zināma kā %s"
+msgid "Please wait"
+msgstr "Lūdzu uzgaidiet"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Removing %s"
-msgstr "Atvienoju %s"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Copying %s"
-msgstr "Kopēju %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Izdarīts"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Pārvietoju failus uz jauno sadaļu"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Modelis ir pareizs"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Direktorijā %s jau ir dati\n"
-"(%s)"
+msgid "Ethernet Card"
+msgstr "Ethernet karte"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Hide files"
-msgstr "Slēpt failus"
+msgid "Info"
+msgstr "Info"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Move files to the new partition"
-msgstr "Pārvietot failus uz jauno sadaļu"
+msgid "Install"
+msgstr "Instalēt"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
 msgstr ""
-"Pēc sadaļas %s formatēšanas visi šajā sadaļā esošie dati tiks pazaudēti"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Lai izmaiņas stātos spēkā, jums ir jāpārstartē dators"
+"Nospiediet \"Labi\", ja vēlaties izdzēst visus datus un\n"
+"sadaļas, kas atrodas uz šī cietā diska. Esiet uzmanīgi, pēc \"Labi\" "
+"nospiešanas jūs nevarēsit atjaunot nekādus datus vai sadaļas, kas atradās\n"
+"uz diska, tajā skaitā arī Windows datus.\n"
+"\n"
+"Nospiediet \"Atcelt\", lai atceltu šo operāciju bez jebkādu uz šī diska "
+"esošu datu vai sadaļu pazaudēšanas."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Iekārtas %s sadaļu tabula tiks ierakstīta uz diska!"
+msgid "Exit install"
+msgstr "Instalēšanas beigas"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Ir nepieciešama pakotne %s. Instalēt to?"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"Viss ir konfigurēts.\n"
+"Tagad jūs varat dalīties Interneta savienojumā ar citiem jūsu lokālajam\n"
+"datortīklam pieslēgtiem datoriem, izmantojot automātisku tīkla "
+"konfigurēšanu\n"
+"(DHCP)."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "What type of partitioning?"
-msgstr "Kāds ir sadalījuma tips?"
+msgid "Remote CUPS server"
+msgstr "Attāls CUPS serveris"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Esiet uzmanīgi: šī operācija ir bīstama."
+msgid "Sun - Mouse"
+msgstr "Sun - pele"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "chunk size"
-msgstr "gabala izmērs"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Jūsu sistēmā ir tikai viens konfigurēts tīkla adapteris:\n"
+"\n"
+"%s\n"
+"\n"
+"Vai vēlaties uzstādīt jūsu lokālo datortīklu ar šo adapteri?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "level"
-msgstr "līmenis"
+msgid "Minimal install"
+msgstr "Minimāla instalēšana"
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
 #, c-format
-msgid "device"
-msgstr "ierīce"
+msgid "Ethiopia"
+msgstr "Etiopija"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Various"
-msgstr "Dažādi"
+msgid "Devanagari"
+msgstr "Devanagari"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Mount options"
-msgstr "Montēšanas iespējas:"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "Fails jau eksistē. Vai to izmantot?"
+msgid "Total size: %d / %d MB"
+msgstr "Kopējais izmērs: %d / %d MB"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Fails jau tiek izmantots citam loopback, norādiet citu failu"
+msgid "disabled"
+msgstr "atslēgt"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Give a file name"
-msgstr "Faila nosaukums"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Pieejamie printeri"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Filesystem type: "
-msgstr "Failsistēmas tips: "
+msgid "Disabling servers..."
+msgstr "Aizliedzu serverus..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Size in MB: "
-msgstr "Izmērs MB: "
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Lūdzu, izvēlieties laika\n"
+"intervālu starp katrām dublēšanas\n"
+"reizēm"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "Loopback faila vārds: "
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s uzstādīšana neizdevās. Uzradās šāda kļūda:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Nav iespējams izpildīt mkinitrd -f /boot/initrd-%s.img %s."
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Šo sadaļu nevar izmantot priekš loopback"
+#: ../../install_any.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Jūs izvēlējāties sekojošu(s) serveri(us): %s\n"
+"\n"
+"\n"
+"Šie serveri tiek aktivizēti pēc noklusēšanas. Tiem nav nekādu zināmu "
+"drošības\n"
+"trūkumu, bet var tikt atrasti kādi jauni. Tādā gadījumā Jums noteikti tie "
+"jāuzlabo\n"
+"pēc iespējas ātrāk.\n"
+"\n"
+"\n"
+"Vai tiešām vēlaties instalēt šos serverus?\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "LVM name?"
-msgstr "LVM vārds?"
+msgid "Network printer (TCP/Socket)"
+msgstr "Tīkla printeris (TCP/Socket)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "new"
-msgstr "jauns"
+msgid "Backup User files..."
+msgstr "Dublēt lietotāja failus..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Norādiet jau esošu LVM kam pievienot"
+msgid "Install system"
+msgstr "Sistēmas instalēšana"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Norādiet eksistējošu RAID, kam pievienot"
+msgid "First DNS Server (optional)"
+msgstr "Pirmais DNS serveris (neobligāts)"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving partition..."
-msgstr "Pārvietoju sadaļu..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Lūdzu, izvēlieties portu, pie kura Jūsu printeris ir pieslēgts, vai ievadiet "
+"ierīces/faila vārdu ievades rindā"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Moving"
-msgstr "Pārvietoju"
+msgid "dhcpd Config..."
+msgstr "Konfigurēju dhcpd..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Uz kuru sektoru vēlaties to pārvietot?"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Uzstādīšana ir notikusi, bet patreiz tā ir aizliegta."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Sector"
-msgstr "Sektors"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub instalēšana"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Uz kuru disku vēlaties to pārvietot?"
+msgid "Israeli"
+msgstr "Izraēlas"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Move"
-msgstr "Pārvietot"
+msgid "load setting"
+msgstr "ielādēt uzstādījumu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New size in MB: "
-msgstr "Jauns izmērs MB: "
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Printeris \"%s\" uz servera \"%s\""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Choose the new size"
-msgstr "Norādiet jauno izmēru"
+msgid "Floppy can be removed now"
+msgstr "Diskete tagad var tikt izņemta"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "Mainīt izmēru"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimāla instalēšana"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Pēc sadaļas %s izmēra maiņas visi šajā sadaļā esošie dati tiks pazaudēti"
+msgid "Denmark"
+msgstr "Dānija"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Visiem šīs sadaļas datiem jāizveido rezerves kopijas"
+msgid "Moving partition..."
+msgstr "Pārvietoju sadaļu..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "This partition is not resizeable"
-msgstr "Šīs sadaļas izmēru nevar izmainīt"
+msgid "(This) DHCP Server IP"
+msgstr "(Šī) DHCP servera IP"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Izskaitļoju FAT failsistēmas robežas"
+msgid "Test of the configuration"
+msgstr "Konfigurācijas izmēģināšana"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Kur jūs vēlaties montēt %s?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Instalēju pakotnes..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
-"Nevaru noņemt montēšanas punktu, jo šī sadaļa tiek izmantota priekš "
-"loopback.\n"
-"Vispirms noņemiet loopback"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kur jūs vēlaties montēt %s ierīci?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Kur jūs vēlaties montēt loopback failu %s?"
+msgid "Choose your filesystem encryption key"
+msgstr "Izvēlieties jūsu failsistēmas šifrēšanas atslēgu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Pārslēgšanās no ext2 uz ext3"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Lūdzu, izvēlieties Jūsu CD/DVD ierīci\n"
+"(Nospiediet Enter, lai kopētu uzstādījumus uz citiem lauciņiem.\n"
+"Šis lauciņš nav nepieciešams, tikai rīks, lai aizpildītu formu.)"
 
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which filesystem do you want?"
-msgstr "Kuru failu sistēmu vēlaties?"
+msgid "Andorra"
+msgstr "Andora"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Change partition type"
-msgstr "Nomainīt sadaļas tipu"
+msgid "Sierra Leone"
+msgstr "Sjerra Leone"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Pēc sadaļas %s tipa nomaiņas visi šajā sadaļā esošie dati tiks pazaudēti"
+msgid "Botswana"
+msgstr "Botsvāna"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (noklusēts: %s)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove the loopback file?"
-msgstr "Atvienot loopback failu?"
+msgid "Alternative test page (Letter)"
+msgstr "Alternatīva izmēģinājuma lapa (Letter)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
 msgstr ""
-"Jūs nevarat izveidot jaunu diska sadaļu\n"
-"(jo ir sasniegts maksimālais primāro sadaļu skaits).\n"
-"Vispims noņemiet kādu primāro sadaļu un izveidojiet paplašināto sadaļu."
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Preference: "
-msgstr "Priekšroka: "
+"DHCP servera konfigurēšana.\n"
+"\n"
+"Šeit varat izvēlēties dažādas DHCP servera konfigurācijas opcijas.\n"
+"Ja nezinat opcijas nozīmi, vienkārši atstājiet to tādu, kā ir.\n"
+"\n"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start sector: "
-msgstr "Sākuma sektors: "
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Izvēlieties X serveri"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Create a new partition"
-msgstr "Izveidot jaunu sadaļu"
+msgid "Swap partition size in MB: "
+msgstr "Swap sadaļas izmērs (MB): "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use for loopback"
-msgstr "Izmantot priekš loopback"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
+"Citas (ne drakbackup)\n"
+"atslēgas jau atrodas norādītajā vietā"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Modify RAID"
-msgstr "Mainīt RAID"
+msgid "No changes to backup!"
+msgstr "Nav izmaiņu, ko dublēt!"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Remove from LVM"
-msgstr "Izņemt no LVM"
+msgid "Formatted\n"
+msgstr "Formatēta\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "Izslēgt no RAID"
+msgid "Type of install"
+msgstr "Instalācijas tips"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Add to LVM"
-msgstr "Pievienot LVM"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Printeris \"%s\" uz SMB/Windows servera \"%s\""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add to RAID"
-msgstr "Pievienot pie RAID"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Dēmons (%s) iekļauj:\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Format"
-msgstr "Formatēt"
+msgid "%d comma separated numbers"
+msgstr "%d ar komatu atdalīti skaitļi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Detailed information"
-msgstr "Detalizēta informācija"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"Protokols rusers tīkla lietotājiem ļauj noskaidrot, kuru lietotāju\n"
+"sesijas ir atvērtas citos atbildošajos datoros."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Trying to rescue partition table"
-msgstr "Mēģinu saglābt sadaļu tabulu"
+msgid "Automatic Steps Configuration"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
 msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
 msgstr ""
-"Ielieciet disketi\n"
-"Visi uz disketes esošie dati tiks dzēsti"
+"Gribat uzzināt vairāk par Atvērtā Koda kopienu? Iesaistieties Brīvās "
+"Programmatūras pasaulē!"
 
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Warning"
-msgstr "Uzmanību"
+msgid "Barbados"
+msgstr "Barbadosa"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Select file"
-msgstr "Izvēlieties failu"
+msgid "Please select data to backup..."
+msgstr "Lūdzu, izvēlieties datus, kurus dublēt..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
-"Sadaļu tabulas rezerves kopijai ir atšķirīgs izmērs\n"
-"Tomēr turpināt?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Removable media automounting"
-msgstr "Izņemama datu nesēja automontēšana"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Reload partition table"
-msgstr "Pārlādēt sadaļu tabulu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Rescue partition table"
-msgstr "Salabot sadaļu tabulu"
+msgid "received"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Restore partition table"
-msgstr "Atjaunot sadaļu tabulu"
+msgid "/File/_New"
+msgstr "/Fails/_Jauns"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Save partition table"
-msgstr "Ierakstīt sadaļu tabulu"
+msgid "The DNS Server IP"
+msgstr "DNS servera IP"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "IP Range End:"
 msgstr ""
-"Ja gribat vairāk sadaļas, izdzēsiet kādu sadaļu, lai varētu izveidot "
-"paplašināto sadaļu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "I can't add any more partition"
-msgstr "Vairāk sadaļas nevar pievienot"
+msgid "High"
+msgstr "Augsts"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "All primary partitions are used"
-msgstr "Visas primārās sadaļas izmantotas"
+msgid "NoVideo"
+msgstr "BezVideo"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "Cietā diska informācija"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "šis lauks apraksta iekārtu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Auto allocate"
-msgstr "Izvietot automātiski"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Pievienoju printeri Star Office/OpenOffice.org/GIMP"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Clear all"
-msgstr "Visu dzēst"
+msgid "Local Printers"
+msgstr "Lokāls printeris"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vai vēlaties saglabāt /etc/fstab izmaiņas"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "Xpmac (instalācijas displeja draiveris)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Iziet neierakstot sadaļu tabulu?"
+msgid "NIS Server"
+msgstr "NIS serveris"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Iziet nesaglabājot"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Ports"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Continue anyway?"
-msgstr "Tad turpināt?"
+msgid "Spain"
+msgstr "Spānija"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Toggle to expert mode"
-msgstr "Pārslēgt eksperta režīmā"
+msgid "This user name has already been added"
+msgstr "Šāds lietotāja vārds jau ir pievienots"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1
 #, c-format
-msgid "Toggle to normal mode"
-msgstr "Pārslēgt normālajā režīmā"
+msgid "Choose a file"
+msgstr "Izvēlieties failu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Undo"
-msgstr "Atsaukt"
+msgid "Apply"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Automātiska noteikšana"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Exit"
-msgstr "Iziet"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Interneta savienojuma koplietošana pašlaik ir atslēgta"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a partition"
-msgstr "Izvēlieties sadaļu"
+msgid "San Marino"
+msgstr "Sanmarino"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Choose another partition"
-msgstr "Izvēlieties citu sadaļu"
+msgid "Belgium"
+msgstr "Beļģija"
 
-#: ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Change type"
-msgstr "Mainīt tipu"
+msgid "Kuwait"
+msgstr "Kuveita"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Search servers"
-msgstr "Meklēšanas serveri"
+msgid "Choose the window manager to run:"
+msgstr "Norādiet izmantojamo logu menedžeri:"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Domain"
-msgstr "Domēns"
+msgid "sub generation of the cpu"
+msgstr ""
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Username"
-msgstr "Lietotāja vārds"
+msgid "First Time Wizard"
+msgstr "Pirmās reizes meistars"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Please enter your username, password and domain name to access this host."
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
 msgstr ""
-"Lūdzu, ievadiet Jūsu lietotāja vārdu, paroli un domēna nosaukumu, lai "
-"piekļūtu šim hostam."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Nepieciešama Domain autentikācija"
+"Atklāta kļūda, bet es nezinu, kā ar to pareizi apieties.\n"
+"Turpiniet, ja vēlaties riskēt."
 
-#
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Another one"
-msgstr "Cits"
+msgid "please wait, parsing file: %s"
+msgstr "lūdzu gaidiet, analizēju failu: %s"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Which username"
-msgstr "Kurš lietotāja vārds"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Taizeme"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Nevar pieslēgties ar lietotāja vārdu %s (nepareiza parole?)"
+msgid "Pakistan"
+msgstr "Pakistāna"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "cpu # "
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Permissions"
+msgstr "Tiesības"
 
-#: ../../harddrake/data.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "USB controllers"
-msgstr ""
+msgid "Provider name (ex provider.net)"
+msgstr "Pakalpojumu sniedzēja nosaukums (piem., provider.net)"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Version: %s\n"
+msgstr "Versija: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Firewire controllers"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
 msgstr ""
+"Jūsu sistēmai trūkst resursu. Mandrake Linux instalēšanas laikā var\n"
+"rasties problēmas. Ja tā notiek, varat pamēģināt teksta instalēšanu.\n"
+"Lai to izdarītu, nospiediet`F1', ka notiek ielāde no CDROM, tad ievadiet\n"
+"`text'."
 
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "Izmantot Windows sadaļu priekš loopback"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Joystick"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Izvēlieties skeneri"
-
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Nezināma|vispārēja"
+msgid "Armenian (typewriter)"
+msgstr "Armēnijas (rakstāmmašīna)"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Modelis"
+msgid "Connection type: "
+msgstr "Savienojuma tips: "
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet karte"
+msgid "Graphical interface"
+msgstr "X pēc startēšanas"
 
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "Processors"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s ar aparatūras 3D akselerāciju"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Webcam"
-msgstr ""
+msgid "India"
+msgstr "Indija"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Skaņas karte"
+#: ../../lang.pm:1
+#, c-format
+msgid "Chad"
+msgstr "Čada"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Cits mēdijs"
+#: ../../lang.pm:1
+#, c-format
+msgid "Slovakia"
+msgstr "Slovākija"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV karte"
+#: ../../lang.pm:1
+#, c-format
+msgid "Singapore"
+msgstr "Singapūra"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Video režīms"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cambodia"
+msgstr "Kombodža"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Tape"
-msgstr "Lenta"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitora horiz. frekv.: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "Path"
+msgstr "Ceļš"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "CD/DVD burners"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "CDROM"
-msgstr "uz CDROM"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "Dānijas"
-
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Zip"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Saglabāt disketē"
-
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Let me pick any driver"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
 msgstr ""
+"Printeris %s\n"
+"Ko jūs vēlaties mainīt šim printerim?"
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Driver:"
-msgstr "Draiveris:"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Pievienot lietotāju"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
@@ -8169,145 +8346,98 @@ msgid ""
 "The current driver for your \"%s\" sound card is \"%s\" "
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
+"Vai vēlaties ļaut lietotājies koplietot savus direktorijus?\n"
+"Atļaujot šo, lietotājiem būs atļauts vienkārši noklikšķināt uz \"Koplietot\" "
+"konqueror\n"
+"vai nautilus programmās.\n"
+"\n"
+"\"Custom\" atļauj individuālu tiesību piešķiršanu.\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
 msgstr ""
+"Lūdzu izvēlieties ielādēt vai saglabāt pakotnes no/uz disketes.\n"
+"Formāts ir tāds pats, kā ar auto_install ģenerētām disketēm."
 
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Nav zināmu draiveru jūsu skaņu kartei (%s)"
-
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Unkown driver"
-msgstr "Nezināms draiveris"
+msgid "China (broadcast)"
+msgstr "China (broadcast)"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Nav zināmu draiveru jūsu skaņu kartei (%s)"
+msgid "Use quota for backup files."
+msgstr "Lietot kvotas priekš dublēšanas failiem."
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No known driver"
-msgstr "Nav zināmu draiveru"
-
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Nav zināms alternatīvs OSS/ALSA draiveris priekš Jūsu skaņu kartes (%s) kura "
-"patreiz izmanto \"%s\""
-
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "No open source driver"
-msgstr "Nav zināmu draiveru"
+msgid "Configuring printer \"%s\"..."
+msgstr "Konfigurēju printeri \"%s\"..."
 
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Lūdzu uzgaidiet ... konfigurācijas piemērošana"
+msgid "Internet connection"
+msgstr "Interneta savienojums"
 
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
 msgstr ""
-"Vecais \"%s\" draiveris ir melnajā sarakstā.\n"
-"\n"
-"Ir saņemtas ziņas par tā sliktu uzvedību pie izlādes.\n"
-"\n"
-"Jaunais \"%s\" draiveris tiks lietots tikai pie nākamās ielādes."
+"Moduļa %s ielāde bija neveiksmīga.\n"
+"Vai vēlaties pamēģināt ar citiem parametriem?"
 
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Trouble shooting"
-msgstr ""
+msgid "Welcome to the Open Source world."
+msgstr "Esiet sveicināti atvērtā koda pasaulē"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnija Hercogovina"
 
-#: ../../harddrake/sound.pm:1
+#: ../../fsedit.pm:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
 msgstr ""
-"\n"
-"\n"
-"Jūsu karte petreiz izmanto %s\"%s\" draiveri (noklusētais draiveris priekš "
-"Jūsu kartes ir \"%s\")"
+"Šim montēšanas punktam ir nepieciešama reāla failsistēma (ext2/ext3, "
+"reiserfs, xfs vai jfs)\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Lūdzu, ievadiet osta vārdu vai IP."
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Šeit Jūs varat izvēlēties alternatīvu draiveri (vai nu OSS vai ALSA) priekš "
-"Jūsu skaņu kartes (%s)."
+msgid "Netherlands"
+msgstr "Holande"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Nosūtu failus..."
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Sound configuration"
-msgstr "Skaņas konfigurācija"
+msgid "Internal ISDN card"
+msgstr "Iekšēja ISDN karte"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
@@ -8318,1665 +8448,1598 @@ msgstr ""
 "Nav zināms alternatīvs OSS/ALSA draiveris priekš Jūsu skaņu kartes (%s) kura "
 "patreiz izmanto \"%s\""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No alternative driver"
-msgstr "Nav alternatīva draivera"
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "Tabula"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "enable radio support"
-msgstr "ieslēgt radio atbalstu"
+msgid "Install & convert Fonts"
+msgstr "Instalēt un pārveidot fontus"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Radio support:"
-msgstr "Radio atbalsts:"
+msgid "WARNING"
+msgstr "BRĪDINĀJUMS"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "PLL setting:"
-msgstr "PLL uzstādījums:"
+msgid "Installing bootloader"
+msgstr "Sāknētāja instalēšana"
 
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Uztveršanas buferu skaits mmap-ētai uztveršanai"
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "replay"
+msgstr "Atkārtot"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Number of capture buffers:"
-msgstr "Uztveršanas buferu skaits:"
+msgid "detected %s"
+msgstr "atklāts %s"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Tuner type:"
-msgstr "Uztvērēja tips:"
+msgid "Virgin Islands (U.S.)"
+msgstr "Virdžīnu salas (ASV)"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Card model:"
-msgstr "Kartes modelis:"
+msgid "Bad backup file"
+msgstr "Slikts rezerves kopijas fails"
 
-#: ../../harddrake/v4l.pm:1
-#, c-format
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
 msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"Priekš vairuma mūsdienu TV kartēm GNU/Linux bttv modulis automātiski nosaka "
-"parametrus.\n"
-"Ja Jūsu karte tiek noteikta nepareizi, Jūs varat norādīt pareizos uztvērēja "
-"un kartes tipus šeit. Vienkārši izvēlieties kartes parametrus, ja "
-"nepieciešams"
+"Interneta savienojuma koplietošana jau ir uzstādīta.\n"
+"Pašlaik tā ir atslēgta.\n"
+"\n"
+"Ko jūs vēlaties darīt?"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Unknown|Generic"
-msgstr "Nezināma|vispārēja"
-
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Nezināms|CPH06X (bt878) [daudz pārdevēju]"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Nezināms|CPH05X (bt878) [daudz pārdevēju]"
+msgid "Pipe into command"
+msgstr ", lietojot komandu %s"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Auto-detect"
-msgstr "Automātiska noteikšana"
-
-#: ../../interactive/newt.pm:1
-#, fuzzy, c-format
-msgid "Do"
-msgstr "Uz leju"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Dažu jūsu datora dzelžu darbībai nepieciešami ``firmas'' draiveri.\n"
+"Papildus informāciju varat atrast šeit: %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "Jūsu izvēle? (noklusēti %s) "
+msgid "Detecting devices..."
+msgstr "Noskaidroju ierīces..."
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Bad choice, try again\n"
-msgstr "Slikta izvēle, pamēģiniet vēlreiz\n"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Re-submit"
-msgstr "Atkārtoti nosūtīt"
+msgid "Click here to launch the wizard ->"
+msgstr "Klikšķiniet šeit, lai sāktu vedni ->"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Ievērojiet, uzraksts mainījies:\n"
-"%s"
+msgid "Haiti"
+msgstr "Haiti"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Description of the fields:\n"
+"\n"
 msgstr ""
-"Lūdzu izvēlieties pirmo skaitli no intervāla 1-10, kuru vēlaties rediģēt,\n"
-"vai arī vienkārši nospiediet Enter lai turpinātu.\n"
-"Jūsu izvēle?"
+"Lauku apraksts:\n"
+"\n"
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Ir daudzas lietas, no kurām izvēlēties (%s).\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "ierīces pārdevēja nosaukums"
 
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Jūsu izvēle? (noklusēti `%s'%s) "
+msgid "Refreshing printer data..."
+msgstr "Atsvaidzinu printera datus..."
 
-#: ../../interactive/stdio.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid " enter `void' for void entry"
-msgstr " ievadiet `void' priekš tukša ieraksta"
+msgid "You must also format %s"
+msgstr "Jums ir jāformatē arī %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Do you want to click on this button?"
-msgstr "Vai vēlaties uzklikšķināt uz šīs pogas?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Esiet uzmanīgi: šī operācija ir bīstama."
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Button `%s': %s"
-msgstr "Poga `%s': %s"
+msgid "Insert a floppy containing package selection"
+msgstr "Ielieciet disketi, kas satur pakotņu izvēli"
 
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Jūsu izvēle? (0/1, noklusēti %s) "
+msgid "Server: "
+msgstr "Serveris:"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Ieraksti, kas Jums būs jāaizpilda:\n"
-"%s"
+msgid "Security Alerts:"
+msgstr "Drošības trauksmes:"
 
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Moduļa %s ielāde bija neveiksmīga.\n"
-"Vai vēlaties pamēģināt ar citiem parametriem?"
+msgid "Sweden"
+msgstr "Zviedrija"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Specify options"
-msgstr "Norādīt opcijas"
+msgid "Use Expect for SSH"
+msgstr "Priekš SSH lietot Expect"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Autoprobe"
-msgstr "Aptaujāt"
+msgid "Poland"
+msgstr "Polija"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Dažos gadījumos %s draiverim ir jānorāda papildus informācija, lai tas\n"
-"darbotos pareizi, tomēr parasti tā nav vajadzīga. Vai vēlaties norādīt\n"
-"papildus parametrus, vai arī ļausit draiverim aptaujāt datoru un savākt\n"
-"nepieciešamo informāciju? Retos gadījumos aptaujāšana var uzkārt datoru,\n"
-"taču tas neradīs nekādus bojājumus."
+msgid "Importance: %s\n"
+msgstr "Svarīgums: %s\n"
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kuru %s draiveri pamēģināt?"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Lūdzu atzīmējiet, vai vēlaties izbīdīt lentu pēc dublēšanas."
 
-#: ../../modules/interactive.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Module options:"
-msgstr "Moduļa opcijas:"
+msgid "Other ports"
+msgstr "Citi porti"
 
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Tagad jūs varat norādīt moduļa %s opcijas.\n"
-"Opciju formāts ir ``nosaukums=vērtība nosaukums2=vērtība2 ...''.\n"
-"Piemēram, ``io=0x300 irq=7''"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Uztveršanas buferu skaits mmap-ētai uztveršanai"
 
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "SMBus controllers"
 msgstr ""
-"Tagad jūs varat norādīt moduļa %s opcijas.\n"
-"Atcerieties, ka visas adreses jāievada ar 0x prefiksu, piemēram, '0x123'"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(modulis %s)"
 
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalēju draiveri %s kartei %s"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Apskatīt dzelžu informāciju"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Vai datorā ir kāds %s interfeiss?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have another one?"
-msgstr "Vai ir vēl kāds?"
-
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "Atrasti %s %s interfeisi"
+msgid "Connection timeout (in sec)"
+msgstr "Savienojuma taimauts (sek.)"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Šeit Jūs varat konfigurēt katru moduļa parametru."
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "comma separated strings"
-msgstr "ar komatu atdalīta virkne"
+msgid "Croatian"
+msgstr "Horvātijas"
 
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "comma separated numbers"
-msgstr "ar komatu atdalīti skaitļi"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Izmantot jau esošu sadaļu"
 
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d ar komatu atdalītas rindas"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Nevar atdalīt: %s"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "%d comma separated numbers"
-msgstr "%d ar komatu atdalīti skaitļi"
+msgid "/Help/_About..."
+msgstr "/Palīdzība/_Par..."
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "a number"
-msgstr "numurs"
+msgid "Remove user directories before restore."
+msgstr "Aizvākt lietotāju direktorijus pirms atjaunošanas."
 
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
 msgstr ""
+"Jūs konfigurēsiet attālinātu printeri. Tam nepieciešama attālināta tīkla "
+"pieeja, bet tīkls vēl nav nokonfigurēts. Ja turpināsiet bez tīkla "
+"konfigurācijas, jūs nevarēsiet lietot printeri, kuru tagad konfigurējat. "
+"Vēlaties turpināt?"
 
-#: ../../network/adsl.pm:1
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Parastākais veids, kā savienoties ar adsl, ir pppoe.\n"
-"Daži pieslēgumi izmanto pptp, pavisam nedaudzi dhcp.\n"
-"Ja jūs nezinat, izvēlieties 'izmantot pppoe'"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "OKI winprinter konfigurācija"
 
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Connect to the Internet"
-msgstr "Savienoties ar Internetu"
+msgid "could not find any font in your mounted partitions"
+msgstr "nevarēju atrast nekādus fontus montētajās diska sadaļās"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Sagem (using pppoa) usb"
+msgid "F00f bug"
 msgstr ""
 
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "use dhcp"
-msgstr "izmantot dhcp"
+msgid "XFree %s"
+msgstr "XFree %s"
 
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "use pptp"
-msgstr "izmantot pptp"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Kuru dhcp klientu vēlaties izmantot?\n"
+"Noklusēti ir dhcp-client"
 
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pppoe"
-msgstr "izmantot pppoe"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Domēna nosaukums"
 
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Other ports"
-msgstr "Citi porti"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Saglabāt disketē"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Everything (no firewall)"
-msgstr "Viss (bez ugunsmūra)"
+msgid "Restore"
+msgstr "Atjaunot"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
 msgstr ""
-"Norādīts nepareizs ports: %s.\n"
-"Pareizs formāts ir \"ports/tcp\" vai \"ports/udp\", \n"
-"kur ports ir no 1 līdz 65535."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Jūs varat ievadīt dažādus portus.\n"
-"Derīgi piemēri ir: 139/tcp 139/udp.\n"
-"Aplūkojiet /etc/services lai iegūtu vairā\n"
-"informācijas."
+msgid "Looking for available packages..."
+msgstr "Meklēju pieejamās pakotnes"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Kādiem servisiem Jūs vēlaties atļaut piekļuvi no Interneta?"
+msgid "Init Message"
+msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall konfigurators\n"
-"\n"
-"Pārliecinieties, kas nokonfigurējāt tīkla/Internet piekļuvi ar\n"
-"drakconnect, pirms doties tālāk."
+msgid "Rescue partition table"
+msgstr "Salabot sadaļu tabulu"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"drakfirewall konfigurētājs\n"
-"\n"
-"Šis rīks konfigurē personālo ugunssienu priekš Mandrake Linux\n"
-"datora. Priekš spēcīga, ugunssienas izveidei veltīta risinājuma,\n"
-"lūdzu apskatiet MandrakeSecurity Firewall XXXXXX."
+msgid "Connection complete."
+msgstr "Savienojuma ātrums"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No network card"
-msgstr "Nav tīkla kartes"
+msgid "Cyprus"
+msgstr "Kipra"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "POP and IMAP Server"
-msgstr "POP un IMAP serveris"
+msgid "Remove from RAID"
+msgstr "Izslēgt no RAID"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mail Server"
-msgstr "Pasta serveris"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "Šifrēšanas atslēga ir pārāk vienkārša (jābūt vismaz %d simbolus garai)"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Domain Name Server"
-msgstr "Domēna nosaukumu serveris"
+msgid "Configuration Wizards"
+msgstr "Konfigurēšanas meistari"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Web Server"
-msgstr "Web serveris"
+msgid "ISDN connection"
+msgstr "ISDN savienojums"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "primary"
+msgstr "primārais"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Host name"
-msgstr "Resursa vārds"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " uz SMB/Windows servera \"%s\", koplietojums \"%s\""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Resursa vārds"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
 msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
 "\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
 "\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
 msgstr ""
+"Tagad varat norādīt servisus, kurus jūs vēlaties startēt sistēmas\n"
+"palaišanas laikā.\n"
+"\n"
+"\n"
+"Kad pele pārvietojas pār saraksta elementu, parādās\n"
+"neliels palīdzības balons, kas paskaidro servisa lomu.\n"
+"\n"
+"\n"
+"Esiet īpaši uzmanīgs šajā solī, ja vēlaties sistēmu izmantot ka serveri:\n"
+"iespējams, ka nevēlaties startēt nevienu nevajadzīgu servisu. Atcerieties.\n"
+"ka daži servisi var būt bīstami, ja darbojas serverī.\n"
+"Parasti izvēlieties tikai tos servisus, kas jums tiešām nepieciešami."
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Configuring network"
-msgstr "Konfigurēju tīklu"
+msgid "Skip"
+msgstr "Izlaist"
 
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+msgid "Niue"
 msgstr ""
-"Lūdzu norādiet, kuru tīkla adapteri vēlaties izmantot Interneta savienojumam."
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
-#, c-format
-msgid "Choose the network interface"
-msgstr "Izvēlieties tīkla interfeisu"
-
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
 msgstr ""
-"Jūsu sistēmā nav atrasts neviens ethernet tīkla adapteris.\n"
-"Nevaru uzstādīt šo savienojuma veidu."
+"Aktivizē/Deaktivizē visus tīkla interfeisus, kas ir konfigurēti\n"
+"startēšanai sistēmas sāknēšanas laikā."
 
-#: ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
 msgstr ""
-"Kuru dhcp klientu vēlaties izmantot?\n"
-"Noklusēti ir dhcp-client"
 
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nav atrasta neviena ISDN PCI karte. Lūdzu izvēlieties kādu no saraksta."
+msgid "important"
+msgstr "svarīga"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"Ir atklāta ISDN PCI karte, bet nav zināms kartes tips. Lūdzu izvēlieties "
-"kādu no nākamajā ekrānā uzskaitītajām PCI kartēm."
+msgid "Total Progress"
+msgstr "Kopējais progress"
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Kura ir jūsu ISDN karte ?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN konfigurācija"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Pārtraukt"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "Turpināt"
-
-#: ../../network/isdn.pm:1
-#, c-format
 msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
 "\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
 "\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
 msgstr ""
+"DrakX mēģinās sameklēt PCI SCSI adapteri(us).\n"
+"Ja DrakX atradīs kādu SCSI adapteri un zinās, kuru draiveri izmantot,\n"
+"tas tiks instalēts automātiski.\n"
 "\n"
-"Ja jums ir ISA karte, vērtībām nākamajā ekrānā jābūt pareizām.\n"
+"Ja jums nav SCSI adapteru, ir ISA SCSI adapteris vai PCI SCSI adapteris,\n"
+"ko DrakX neatpazīst, jums tiks pajautāts, vai jūsu sistēmā ir SCSI\n"
+"adapteris. Ja nav SCSI adapteru, jūs varat vienkārši izvēlēties 'Nē'.\n"
+"Ja jūs izvēlaties 'Jā', jums tiks parādīts draiveru saraksts, kurā\n"
+"varat izvēlēties vajadzīgo adapteri.\n"
 "\n"
-"Ja jums ir PCMCIA karte, jums ir jāzina kartes irq un io.\n"
+"\n"
+"Ja jums nepieciešams patstāvīgi norādīt adapteri, DrakX pajautās, vai\n"
+"vēlaties norādīt adaptera opcijas. Jums būtu jāļauj DrakX aptaujāt\n"
+"dzelžus un noskaidrot opcijas. Parasti tas izdodas bez problēmām.\n"
+"\n"
+"Ja neizdodas, jums patstāvīgi jānorāda draivera opcijas.\n"
+"Izlasiet Instalēšanas rokasgrāmatu (3. nodaļu, apakšnodaļu \"Informācijas "
+"savākšana par jūsu dzelžiem\"), lai uzzinātu, kā iegūt šo\n"
+"informāciju no dzelžu dokumentācijas, ražotāja tīkla lapas\n"
+"(ja jums ir pieejams Internets) vai Windows (ja tas ir uzstādīts jūsu "
+"datorā)."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "I don't know"
-msgstr "Nezinu"
+msgid "Users"
+msgstr "Lietotāji"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Aruba"
+msgstr "Aruba"
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Preparing bootloader..."
+msgstr "Sagatavoju sāknētāju"
 
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "What kind of card do you have?"
-msgstr "Kāds ir jūsu kartes tips?"
+msgid "Gateway (e.g. %s)"
+msgstr "Vārteja (piem. %s)"
 
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Atrasta \"%s\" saskarne, vai vēlaties to lietot?"
+msgid "The passwords do not match"
+msgstr "Paroles nesakrīt"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Kādu protokolu vēlaties izmantot?"
+msgid "Examples for correct IPs:\n"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Citur pasaulē"
+msgid "Frequency (MHz)"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 msgstr ""
-"Citur pasaulē \n"
-" nav D-Channel (izdalītas līnijas)"
+"Lai izmantotu šo saglabāto pakotņu izvēli, palaidiet instalāciju ar ``linux "
+"defcfg=floppy''"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "European protocol"
-msgstr "Eiropas protokols"
+msgid "the number of the processor"
+msgstr "ierīces pārdevēja nosaukums"
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Eiropas protokols (EDSS1)"
+msgid "Hardware clock set to GMT"
+msgstr "Datora pulkstenis iestatīts rādīt GMT laiku"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Izvēlieties pakalpojumu sniedzēju.\n"
-" Ja tas nav šajā sarakstā, izvēlietis Nav sarakstā"
+msgid "Give a file name"
+msgstr "Faila nosaukums"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "External ISDN modem"
-msgstr "Ārējs ISDN modēms"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Lūdzu norādiet portu, kuram ir pievienots printeris."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "Internal ISDN card"
-msgstr "Iekšēja ISDN karte"
+msgid "Change Cd-Rom"
+msgstr "Nomainiet Cd-Rom"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Kāds ir jūsu ISDN savienojuma veids?"
+msgid "Paraguay"
+msgstr "Paragvaja"
 
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
-#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Tīkla konfigurēšanas meistars"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
+msgstr "Lietot Pieaugošas Dublēšanas (neaizvietot iepriekšējās dublēšanas)"
 
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Veca konfigurācija (isdn4net)"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Nav zināmu draiveru jūsu skaņu kartei (%s)"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Jauna konfigurācija (isdn-light)"
+msgid "force"
+msgstr "piespiest"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "bet nesakrīt"
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Instalēt"
+msgid "Exit"
+msgstr "Iziet"
 
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
 msgstr ""
+"PIEZĪME: Atkarībā no printera modeļa un drukāšanas sistēmas, tiks instalēti %"
+"d MB papildus programmatūras."
 
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Tabula"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Otrais DNS serveris (neobligāts)"
+msgid "Estonian"
+msgstr "Igaunijas"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "First DNS Server (optional)"
-msgstr "Pirmais DNS serveris (neobligāts)"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache ir Vispasaules tīmekļa (WWW) serveris. Tas tiek izmantots HTML\n"
+"failu un CGI izplatīšanai."
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Domain name"
-msgstr "Domēna nosaukums"
+msgid "Add/Del Clients"
+msgstr "Pielikt/noņemt klientus"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Choose the network interface"
+msgstr "Izvēlieties tīkla interfeisu"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Script-based"
-msgstr "Ar skriptu"
+msgid "Unknown Model"
+msgstr "Nezināms modelis"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Terminal-based"
-msgstr "Izmantojot termināli"
+msgid "CD/DVD burners"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Noklusēti sāknējamā sadaļa\n"
+"    (lai sāknētu MS-DOS, nevis lilo)\n"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Lietotāja ID"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "izvēlieties attēla failu"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Phone number"
-msgstr "Telefona numurs"
+msgid "Firewalling configuration detected!"
+msgstr "Tika atklāta ugunsmūra konfigurācija!"
 
 #: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Connection name"
 msgstr "Savienojuma nosaukums"
 
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "Iezvanpieejas opcijas"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Lūdzu norādiet, kuram seriālajam portam ir pievienots modēms."
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Tīkla konfigurācija"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
 msgstr ""
-"Konfigurēšanas laikā uzradās problēmas.\n"
-"Pārbaudiet savienojumu ar net_monitor vai mcc. Ja savienojums nestrādā, Jūs, "
-"iespējams, vēlaties atkārtot konfigurēšanu."
+"teksta laukuma x koordināte,\n"
+"simbolu skaits"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Kad tas tiks paveikts, mēs rekomendējam restartēt X vidi, lai izvairītos no "
-"problēmām, saistītām ar hosta vārdu."
+msgid "Updating package selection"
+msgstr "Atjaunoju pakotņu izvēli"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Apsveicu, tīkla un Internet konfigurēšana ir pabeigta.\n"
-"Konfigurācija tagad tiks lietota uz Jūsu datora.\n"
-"\n"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Kur jūs vēlaties montēt loopback failu %s?"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
 msgstr ""
-"Pārstartējot tīklu, uzradās problēma: \n"
-"\n"
-"%s"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Nepieciešams instalēt pakotni %s. Vai vēlaties to instalēt?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Tīkla konfigurācija"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Vai vēlaties startēt savienojumu palaišanas laikā?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection"
-msgstr "Interneta savienojums"
+msgid "the number of buttons the mouse has"
+msgstr "ierīces pārdevēja nosaukums"
 
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
 msgstr ""
-"Jūs esat konfigurējuši vairākus veidus, kā savienoties ar Internet.\n"
-"Izvēlieties vienu, kuru vēlaties lietot.\n"
-"\n"
+"Lūdzu, norādiet direktoriju (vai moduli) uz\n"
+"šī hosta, kur novietot rezerves kopiju."
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Izvēlieties savienojumu, kuru vēlaties konfigurēt"
+msgid "Replay"
+msgstr "Atkārtot"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet karte(s) atrasta"
+msgid "Backup other files"
+msgstr "Atjaunot citus failus"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "LAN connection"
-msgstr "LAN savienojums"
+msgid "No floppy drive available"
+msgstr "Nav nevienas diskešu iekārtas"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "cable connection detected"
-msgstr "Noteikts kabeļa savienojums"
+msgid "Backup files are corrupted"
+msgstr "Rezerves kopijas faili ir bojāti"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Cable connection"
-msgstr "Kabeļa savienojums"
+msgid "TV norm:"
+msgstr "TV formāts:"
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "atklāts %s"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Cpuid family"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "ADSL connection"
-msgstr "ADSL savienojums"
+msgid "32 MB"
+msgstr "32 MB"
 
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "detected %s"
-msgstr "atklāts %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lietuvas AZERTY (jaunā)"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "ISDN connection"
-msgstr "ISDN savienojums"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Parasts modēma savienojums"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected on port %s"
-msgstr "atklāts uz porta %s"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Jūs izvēlējies programmatūras uzturētu RAID sadaļu kā saknes sadaļu (/).\n"
+"Neviens sāknētājs nespēj to izmantot bez /boot sadaļas.\n"
+"Tāpēc neaizmirstiet izveidot /boot sadaļu."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Normal modem connection"
-msgstr "Parasts modēma savienojums"
+msgid "Previous"
+msgstr "Iepriekšējais"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Detecting devices..."
-msgstr "Noskaidroju ierīces..."
+msgid "Other OS (MacOS...)"
+msgstr "Cita OS (MacOS...)"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Expert Mode"
-msgstr "Eksperta režīms"
+msgid "To activate the mouse,"
+msgstr "Lai aktivizētu peli,"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Use auto detection"
-msgstr "Izmantot autonoteikšanu"
+msgid "Bringing up the network"
+msgstr "Iedarbinu tīklu"
 
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Choose the profile to configure"
-msgstr "Izvēlieties konfigurējamo profilu"
+msgid "Screenshots will be available after install in %s"
+msgstr "Ekrāna attēli būs pieejami pēc instalēšanas %s."
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
-"Welcome to The Network Configuration Wizard.\n"
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
 "\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Laipni lūdzam tīkla konfigurēšanas vednī.\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
 "\n"
-"Tūlīt mēs konfigurēsim Jūsu internet/tīkla savienojumu.\n"
-"Ja nevēlaties lietot automātisko noteikšanu, noņemiet atzīmi no izvēles "
-"rūtiņas.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Jūsu tīkls jau ir nokonfigurēts, jo veicat tīkla instalāciju.\n"
-"Klikšķiniet uz Labi, lai paturētu konfigurāciju, vai uz Atlikt, lai "
-"konfigurētu Internet un tīkla savienojumu.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
 "\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
 "\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
 "\n"
-"We are now going to configure the %s connection.\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
 "\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
 "\n"
-"Press OK to continue."
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
 msgstr ""
+"Uz jūsu cietā diska ir atrasta vairāk nekā viena Microsoft Windows sadaļa.\n"
+"Lūdzu izvēlieties to sadaļu, kuras izmēru jūs vēlaties izmainīt, lai\n"
+"instalētu jauno Mandrake Linux operētājsistēmu.\n"
+"\n"
 "\n"
+"Jūsu zināšanai, katra sadaļa ir uzskaitīta šādā veidā: \"Linux nosaukums\",\n"
+"\"Windows nosaukums\" \"Izmērs\".\n"
 "\n"
+"\"Linux nosaukums\" ir kodēts šādi: \"cietā diska tips\", \"cietā diska\n"
+"numurs\", \"sadaļas numurs\" (piemēram, \"hda1\").\n"
 "\n"
-"Tagad mēs konfigurēsim %s savienojumu.\n"
 "\n"
+"\"Cietā diska tips\" ir \"hd\", ja jūsu cietais disks ir IDE disks, \"sd\",\n"
+"ja tas ir SCSI cietais disks.\n"
 "\n"
-"Nospiediet Labi lai turpinātu."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Tagad mēs konfigurēsim %s savienojumu."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Interneta savienojums un konfigurācija"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Konfigurēt savienojumu"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "Atvienot"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "Savienot"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
 "\n"
-"You can reconfigure your connection."
-msgstr ""
+"\"Cietā diska numurs\" vienmēr ir burts pēc \"hd\" vai \"sd\". IDE diskiem:\n"
+"\n"
+"   * \"a\" nozīmē \"primārā IDE kontroliera galvenais disks\",\n"
+"\n"
+"   * \"b\" nozīmē \"primārā IDE konytroliera pakārtotais disks\",\n"
+"\n"
+"   * \"c\" nozīmē \"sekundārā IDE kontroliera galvenais disks\",\n"
+"\n"
+"   * \"d\" nozīmē \"sekundārā IDE kontroliera pakārtotais disks\".\n"
+"\n"
+"\n"
+"SCSI diskiem \"a\" nozīmē \"primārais cietais disks\", \"b\" nozīmē\n"
+" \"sekundārais cietais disks\", utt...\n"
 "\n"
-"Varat pārkonfigurēt savienojumu."
+"\"Windows nosaukums\" ir jūsu cietā diska burts Windows vidē (pirmais disks\n"
+"vai sadaļa saucas \"C:\")."
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Tanzania"
 msgstr ""
-"\n"
-"Varat pievienoties Internetam vai pārkonfigurēts savienojumu."
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Pašlaik jūs neesat pievienojies Internetam."
+msgid "Computing FAT filesystem bounds"
+msgstr "Izskaitļoju FAT failsistēmas robežas"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
 msgstr ""
 "\n"
-"Varat atvienoties vai pārkonfigurēt savienojumu."
+"Dublēšanas avoti: \n"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Pašlaik jūs esat pievienojies Internetam."
+msgid "Content of the file"
+msgstr "Faila saturs"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL būtu jāsākas ar 'ftp:' vai 'http:'"
+msgid "Authentication LDAP"
+msgstr "LDAP autentikācija"
 
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy būtu jābūt http://..."
+msgid "Let me pick any driver"
+msgstr ""
 
-#: ../../network/network.pm:1
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Profils: "
 
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "transmitted"
+msgstr ""
 
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxies configuration"
-msgstr "Proxy serveru konfigurācija"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Ceļa izvēle"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Vārtejas adreses formātam ir jābūt 1.2.3.4"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS servera adreses formātam jābūt 1.2.3.4"
+msgid "%d comma separated strings"
+msgstr "%d ar komatu atdalītas rindas"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Gateway device"
-msgstr "Vārtejas ierīce"
+msgid "Here is the full list of keyboards available"
+msgstr "Šeit ir pilns pieejamo tastatūru saraksts"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Vārteja (piem. %s)"
+msgid "Theme name"
+msgstr "Tēmas nosaukums"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "DNS server"
-msgstr "DNS serveris"
+msgid "/_Help"
+msgstr "/_Palīdzība"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
-"Lūdzu ievadiet resursa vārdu.\n"
-"Resursa vārdam ir jābūt pilnam kvalificētam resursa vārdam,\n"
-"piemēram, ``mybox.mylab.myco.com''.\n"
-"Jūs varat ievadīt arī vārtejas IP adresi, ja tāda ir"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "the width of the progress bar"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
+msgid "Cook Islands"
+msgstr "Kuka salas"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adreses formātam jābūt 1.2.3.4"
+msgid "Formatting partition %s"
+msgstr "Formatēju sadaļu %s"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Start at boot"
-msgstr "Sākt pie ielādes"
+msgid "Hostname required"
+msgstr "Nepieciešams resursa vārds"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Lūdzu, ievadiet osta vārdu vai IP."
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Cancel"
+msgstr "Atcelt"
+
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Tīkla konfigurācija"
+msgid "Searching for configured scanners ..."
+msgstr "Pieejamie printeri"
 
-#: ../../network/network.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Sekot tīkla kartes id (noder klēpjdatoriem)"
+msgid "Wheel"
+msgstr "Ritenis"
 
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Resursa vārds"
+msgid "Videocard"
+msgstr "Video režīms"
 
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Netmask"
-msgstr "Tīkla maska"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tDublēšanai izmantot tar un bzip2\n"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "IP address"
-msgstr "IP adrese"
+msgid "Remove Selected"
+msgstr " Noņemt atzīmētos"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "/Autodetect _modems"
+msgstr "Automātiska noteikšana"
 
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Automatic IP"
-msgstr "Automātisks IP"
+msgid "Remove printer"
+msgstr "Noņemt printeri"
 
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid " (driver %s)"
-msgstr " (draiveris %s)"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"BRĪDINĀJUMS!\n"
+"\n"
+"Tagad DrakX izmainīs Windows sadaļas izmēru. Esiet\n"
+"uzmanīgs: šī darbība ir bīstama. Ja jūs to vēl neesat\n"
+"izdarījis, jums vispirms ir jāpārtrauc instalēšana, no\n"
+"Windows jāpalaiž scandisk (ieteicams palaist arī defrag),\n"
+"tad atkārtoti jāsāk instalēšana. Vajadzētu izveidot arī\n"
+"datu rezerves kopiju. Kad esat pārliecināts, nospiediet Labi."
 
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurēju tīkla iekārtu %s"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Kādiem servisiem Jūs vēlaties atļaut piekļuvi no Interneta?"
 
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
 msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
 msgstr ""
-"Lūdzu ievadiet šī datora IP konfigurāciju.\n"
-"Visi dati jāievada kā IP adreses ar punktiem atdalītu decimālu\n"
-"skaitļu veidā (piemēram, 1.2.3.4)."
+"Laipni lūdzam pasta konfigurēšanas utilītā.\n"
+"\n"
+"Sēit Jūs varēsiet uzstādīt brīdinājumu sistēmu.\n"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"BRĪDINĀJUMS: Šī ierīce jau agrāk ir konfigurēta, lai pievienotos "
-"Internetam.\n"
-"Vienkārši apstipriniet, ka vēlaties saglabāt šo konfigurāciju.\n"
-"Tālāko lauku izmainīšana pārrakstīs šo konfigurāciju."
+msgid "Other"
+msgstr "Cits"
 
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Brīdinājums! Ir atklāta eksistējoša ugunsmūra konfigurācija. Pēc "
-"instalēšanas jums varbūt vajadzēs patstāvīgi pielabot konfigurāciju."
+msgid "Default"
+msgstr "Noklusēts"
 
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Tika atklāta ugunsmūra konfigurācija!"
+msgid "Button 2 Emulation"
+msgstr "2. pogas emulācija"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Account Password"
-msgstr "Konta parole"
+msgid "type1inst building"
+msgstr "type1inst uzbūve"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Konta nosaukums (lietotāja vārds)"
+msgid "Abiword"
+msgstr "Abiword"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Savienojuma taimauts (sek.)"
+msgid "choose image file"
+msgstr "izvēlieties attēla failu"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Connection speed"
-msgstr "Savienojuma ātrums"
+msgid "X server"
+msgstr "X serveris"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Dialing mode"
-msgstr "Zvanīšanas režīms"
+msgid "Domain Admin User Name"
+msgstr "Domēna administratora lietotāja vārds"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Choose your country"
-msgstr "Izvēlieties valsti"
+msgid "There was an error while scanning for TV channels"
+msgstr "TV kanālu skenēšanas laikā bija kļūda"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Provaidera dns 2 (nav obligāti)"
+msgid "US keyboard (international)"
+msgstr "ASV tastatūra (starptautiskā)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Provaidera dns 1 (nav obligāti)"
+msgid "Not installed"
+msgstr "Nav instalēts"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Provider phone number"
-msgstr "Pakalpojumu sniedzēja telefona numurs"
+msgid "LAN connection"
+msgstr "LAN savienojums"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Pakalpojumu sniedzēja nosaukums (piem., provider.net)"
+msgid "/File/-"
+msgstr "/Fails/-"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Your personal phone number"
-msgstr "Jūsu privātais telefona numurs"
+msgid "Italian"
+msgstr "Itālijas"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid "Card IO_1"
-msgstr "Kartes IO_1"
+msgid "Basic"
+msgstr "Pamata"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+" jauninājumi 2002 MandrakeSoft, Stew Benedict <sbenedict\\@mandrakesoft.com>"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Card IO_0"
-msgstr "Kartes IO_0"
+msgid "Honduras"
+msgstr "Hondurasa"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
+msgstr ""
 
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Card IO"
 msgstr "Kartes IO"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Card mem (DMA)"
-msgstr "Kartes mem (DMA)"
+msgid "when checked, owner and group won't be changed"
+msgstr "kad atzīmēts, īpašnieks un grupa netiks izmainīti"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Card IRQ"
-msgstr "Kartes IRQ"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Šī speciālā Bootstrap\n"
+"sadaļa ir paredzēta jūsu\n"
+"sistēmas duālai sāknēšanai.\n"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Please fill or check the field below"
-msgstr "Lūdzu aizpildiet vai izvēlietis lauku"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "Savienojuma konfigurēšana"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
 msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
 msgstr ""
-"Šķiet, ja jūsu sistēmu nav pieslēgta Internetam.\n"
-"Mēģiniet pārkonfigurēt savienojumu."
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Tā tiks tagad atslēgta drošības dēļ."
 
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Sistēma pašlaik ir savienota ar Internetu."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Tīkls ar FTP.\n"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Testing your connection..."
-msgstr "Izmēģinu savienojumu..."
+msgid "Russian (Yawerty)"
+msgstr "Krievijas (Yawerty)"
 
-#: ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vai vēlaties mēģināt savienoties ar internetu tūlīt?"
+msgid "You must enter a device or file name!"
+msgstr "Jums ir jāievada ierīces vai faila nosaukums!"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Internet configuration"
-msgstr "Interneta konfigurācija"
+msgid "/_Quit"
+msgstr "/_Iziet"
 
-#: ../../partition_table/raw.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
 msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
 msgstr ""
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid " (Default)"
-msgstr " (Noklusēts)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafiskā atmiņa: %s kB\n"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Uz CUPS servera \"%s\""
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
 
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remote Printers"
-msgstr "Attāls printeris"
+msgid "access to compilation tools"
+msgstr "piekļuve kompilēšanas rīkiem"
 
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Please select data to restore..."
+msgstr "Lūdzu, izvēlieties datus, kurus atjaunot..."
 
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "(on this machine)"
-msgstr "(pie šī datora)"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Ja gatavojaties izmantot aboot, neaizmirstiet atstāt brīvu vietu diska\n"
+"sākumā (pietiek ar 2048 sektoriem)"
 
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "(on %s)"
-msgstr "uz %s)"
+msgid "Standard test page"
+msgstr "Standarta izmēģinājuma lapa"
 
-#: ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "Create"
+msgstr "Izveidot"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "What"
+msgstr "Ko"
 
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "There was an error ordering packages:"
+msgstr "Pakotņu kārtošanas laikā atklāta kļūda:"
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Bulgarian (BDS)"
+msgstr "Bulgāru (BDS)"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Disable Server"
+msgstr "Aizliegt serveri"
 
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Filesystem encryption key"
+msgstr "Failsistēmas šifrēšanas atslēga"
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Gujarati"
+msgstr "Gujarati"
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Unknown Model"
-msgstr "Nezināms modelis"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Lūdzu izvēlieties pirmo skaitli no intervāla 1-10, kuru vēlaties rediģēt,\n"
+"vai arī vienkārši nospiediet Enter lai turpinātu.\n"
+"Jūsu izvēle?"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Unknown model"
-msgstr "Nezināms modelis"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Ports"
+msgid "Save theme"
+msgstr "Saglabāt tēmu"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Resursa vārds"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "group"
+msgstr "grupa"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Tīkls"
+#: ../../lang.pm:1
+#, c-format
+msgid "Brazil"
+msgstr "Brazīlija"
 
-#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Interfeiss %s"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Auto Install"
+msgstr "Automātiska instalēšana"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "Lokālā tīkla adrese"
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Network Configuration Wizard"
+msgstr "Tīkla konfigurēšanas meistars"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
-msgstr "Tiešais printeris (bez draivera)"
+msgid "Removable media automounting"
+msgstr "Izņemama datu nesēja automontēšana"
 
-#: ../../printer/main.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ", using command %s"
-msgstr ", lietojot komandu %s"
+msgid "Printing"
+msgstr "Drukāšana"
 
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " uz Novell servers \"%s\", printeris \"%s\""
+msgid "Unkown driver"
+msgstr "Nezināms draiveris"
 
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " uz SMB/Windows servera \"%s\", koplietojums \"%s\""
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Netika atrasti printeri, kas tieši pieslēgti Jūsu datoram"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP resurss \"%s\", ports %s"
+msgid "Create a new partition"
+msgstr "Izveidot jaunu sadaļu"
 
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " uz LPD servers \"%s\", printeris \"%s\""
+msgid "Driver:"
+msgstr "Draiveris:"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "unknown"
+msgstr "Nezināms modelis"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ", printing to %s"
-msgstr ", drukāju uz %s"
+msgid "Use fdisk"
+msgstr "Izmantot fdisk"
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ", multi-function device"
-msgstr ", daudzfunkcionāla ierīce"
+msgid "MOVE YOUR WHEEL!"
+msgstr "PAKUSTINIET RITENI!"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", daudzfunkcionāla ierīce pie HP JetDirect"
+msgid "sent: "
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ", multi-function device on USB"
-msgstr ", daudzfunkcionāla ierīce pie USB"
+msgid "Automatic IP"
+msgstr "Automātisks IP"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", daudzfunkcionāla ierīce pie paralēlā porta \\/*%s"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", USB printer"
-msgstr ", USB printeris \\/*%s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB printeris \\/*%s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuration of a remote printer"
+msgstr "Attālināta printera konfigurācija"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " on parallel port \\#%s"
-msgstr " uz paralelā porta \\/*%s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Moldova"
+msgstr "Moldāvija"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Local Printers"
-msgstr "Lokāls printeris"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Lūdzu atzīmējiet, vai vēlaties dzēst lentu pirms dublēšanas."
 
-#: ../../printer/main.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Pipe job into a command"
+msgid "An online platform to respond to enterprise support needs."
 msgstr ""
+"Tiešsaistes platforma, lai atbildētu uz kompānijas specifiskām atbalsta "
+"vajadzībām."
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Enter a printer device URI"
-msgstr "Ievadiet printera ierīces URI"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL būtu jāsākas ar 'ftp:' vai 'http:'"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Printer on NetWare server"
-msgstr "Printeris uz NetWare servera"
+msgid "Add a new rule at the end"
+msgstr "Pievienot jaunu noteikumu beigās"
 
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printeris uz SMB/Windows 95/98/NT servera"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Tīkla printeris (TCP/Socket)"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Tagad jūs varat norādīt moduļa %s opcijas.\n"
+"Opciju formāts ir ``nosaukums=vērtība nosaukums2=vērtība2 ...''.\n"
+"Piemēram, ``io=0x300 irq=7''"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printer on remote lpd server"
-msgstr "Printeris uz attāla lpd servera"
+msgid "Quit without writing the partition table?"
+msgstr "Iziet neierakstot sadaļu tabulu?"
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Printeris uz attāla CUPS servera"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
 
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Remote printer"
-msgstr "Attāls printeris"
+msgid "Installing packages..."
+msgstr "Instalēju pakotnes..."
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Local printer"
-msgstr "Lokāls printeris"
+msgid "Dutch"
+msgstr "Dānijas"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "The following packages need to be installed:\n"
+msgstr "Tiks instalētas sekojošas pakotnes"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Configuring applications..."
-msgstr "Konfigurēju aplikācijas..."
+msgid "Angola"
+msgstr "Angola"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "service setting"
+msgstr "servisa uzstādījums"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Noņemu printeri \"%s\"..."
+msgid "Custom"
+msgstr "Pielāgota"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
+msgstr "Fails jau tiek izmantots citam loopback, norādiet citu failu"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Vai tiešām vēlaties noņemt printeri \"%s\"?"
+msgid "Read-only"
+msgstr "Tikai-lasīt"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remove printer"
-msgstr "Noņemt printeri"
+msgid "Latvia"
+msgstr "Latvija"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Uzziniet, kā izmantot šo printeri"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "Nav zināmu draiveru"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Print test pages"
-msgstr "Drukāt izmēģinājuma lapas"
+msgid "1 MB"
+msgstr "1 MB"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Neizdevās printeri \"%s\" noņemt no Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Sekojošais printeris tika automātiski noteikts, ja tas nav tas, kuru "
+"vēlaties konfigurēt, ievadiet ierīces/faila vārdu ievades rindā"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
 #, c-format
 msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
-"Printeris \"%s\" tika veiksmīgi noņemts no Star Office/OpenOffice.org/GIMP."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Noņemu printeri no Star Office/OpenOffice.org/GIMP"
+msgid "Configure Local Area Network..."
+msgstr "Konfigurēt lokālo datortīklu..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Noņemt šo printeri no Star Office/OpenOffice.org/GIMP"
+msgid "Launch the sound system on your machine"
+msgstr "Palaist skaņusistēmu uz Jūsu datora"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "Neizdevās printeri \"%s\" pievienot Star Office/OpenOffice.org/GIMP."
+msgid "Preparing printer database..."
+msgstr "Sagatavoju printeru datubāzi..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Printeris \"%s\" tika veiksmīgi pievienots Star Office/OpenOffice.org/GIMP."
+msgid "Information"
+msgstr "Informācija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Pievienoju printeri Star Office/OpenOffice.org/GIMP"
+msgid "No network card"
+msgstr "Nav tīkla kartes"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Pievienot šo printeri Star Office/OpenOffice.org/GIMP"
+msgid "Which filesystem do you want?"
+msgstr "Kuru failu sistēmu vēlaties?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printeris \"%s\" tagad ir uzstādīts kā noklusētais printeris."
+msgid "3 buttons"
+msgstr "3 pogas"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Default printer"
-msgstr "Noklusētais printeris"
+msgid "Detailed information"
+msgstr "Detalizēta informācija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set this printer as the default"
-msgstr "Uzstādīt šo printeri ka noklusēto"
+msgid "Malta"
+msgstr "Malta"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "Printera opcijas"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Printer manufacturer, model"
-msgstr "Printera izgatavotājs, modelis"
+msgid "This floppy is not FAT formatted"
+msgstr "Šī diskete nav FAT formatēta"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Printera izgatavotājs, modelis, draiveris"
+msgid "Configuring network"
+msgstr "Konfigurēju tīklu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Noņemu veco printeri \"%s\"..."
+msgid "Graphic Card"
+msgstr "Grafiskā karte"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Printer name, description, location"
-msgstr "Printera nosaukums, apraksts, atrašanās vieta"
+msgid "Resizing Windows partition"
+msgstr "Mainu Windows sadaļas izmēru"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Printer connection type"
-msgstr "Printera pievienojuma tips"
+msgid "Provider dns 1 (optional)"
+msgstr "Provaidera dns 1 (nav obligāti)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Raw printer"
-msgstr "Tiešais printeris"
+msgid "Cameroon"
+msgstr "Kamerūna"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do it!"
-msgstr "Aiziet!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"Tagad jūs varat sadalīt diska iekārtu %s.\n"
+"Kad esat pabeiguši, neaizmirstiet saglabāt, izmantojot `w'"
 
 #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -9985,447 +10048,357 @@ msgstr "Aiziet!"
 msgid "Close"
 msgstr "Aizvērt"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
-"Printeris %s\n"
-"Ko jūs vēlaties mainīt šim printerim?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Izmainīt printera konfigurāciju"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Add a new printer"
-msgstr "Pievienot jaunu printeri"
+msgid "Calendar"
+msgstr "Kalendārs"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Normal Mode"
-msgstr "Normāls režīms"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
+"Atjaunot izvēlēto\n"
+"kataloga ierakstu"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Change the printing system"
-msgstr "Drukas sistēmas nomaiņa"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr ""
+"Lai izmantotu attālu lpd printeri, jums ir jānorāda printera servera "
+"nosaukums un printera nosaukums uz šī servera."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CUPS configuration"
-msgstr "CUPS konfigurācija"
+msgid "Iceland"
+msgstr "Islande"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Atsvaidzināt printeru sarakstu (lai parādītu visus attāli pieejamos CUPS "
-"printerus)"
+msgid "consolehelper missing"
+msgstr "konsoles palīgs nav pieejams"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-"Atsvaidzināt printeru sarakstu (lai parādītu visus attāli pieejamos CUPS "
-"printerus)"
+#: ../../services.pm:1
+#, c-format
+msgid "stopped"
+msgstr "apturēts"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+msgid "Whether the FPU has an irq vector"
 msgstr ""
-"Ir konfigurēti sekojoši printeri. Ar dubultklikšķi izvēlieties printeri, lai "
-"nomainītu tā uzstādījumus, padarītu to par noklusēto printeri vai apskatītos "
-"informāciju par to."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Printing system: "
-msgstr "Drukas sistēma:"
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Checking installed software..."
-msgstr "Pārbaudu instalētās programmas..."
+msgid "Expand Tree"
+msgstr "Izvērst koku"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Installing Foomatic..."
-msgstr "Instalēju Foomatic..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Konfigurēju printeri \"%s\"..."
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
+"Vecais \"%s\" draiveris ir melnajā sarakstā.\n"
+"\n"
+"Ir saņemtas ziņas par tā sliktu uzvedību pie izlādes.\n"
+"\n"
+"Jaunais \"%s\" draiveris tiks lietots tikai pie nākamās ielādes."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigurēju printeri \"%s\"..."
+msgid "Expert Mode"
+msgstr "Eksperta režīms"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Reading printer data..."
-msgstr "Nolasu printera datus..."
+msgid "Printer options"
+msgstr "Printera opcijas"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kuru drukāšanas sistēmu (spolētāju) vēlaties izmantot?"
+msgid "Local Network adress"
+msgstr "Lokālā tīkla adrese"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Select Printer Spooler"
-msgstr "Izvēlieties printera spolētāju"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Noklusētais printeris"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Instalēju pakotnes..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "Dublēt sistēmas failus. (/etc direktoriju)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Atvienoju %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
 "\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
 "\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
 msgstr ""
+"Jums ir iespēja lejuplādēt atjauninātas pakotnes. Šīs pakotnes tika "
+"izlaistas\n"
+"pēc distribūcijas izlaišanas. Tās var saturēt drošības vai kļūdu labojumus.\n"
+"\n"
+"Lai lejuplādētu šīs pakotnes, Jums jabūt darbojošamies Interneta "
+"savienojumam.\n"
+"\n"
+"Vai Jūs vēlaties instalēt jauninājumus?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Startēju printēšnas sistēmu pie ielādes"
+msgid "Samba Server"
+msgstr "Samba serveris"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalēju drukāšanas sistēmu %s drošības līmenī"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "paranoisks"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "augsts"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Restarting printing system..."
-msgstr "Pārstartēju printēšanas sistēmu..."
+msgid "Australian Optus cable TV"
+msgstr "Austrāliešu Optus kabeļu TV"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid "Configuration of a remote printer"
-msgstr "Attālināta printera konfigurācija"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
 msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr ""
-"Tīkla piekļuve nebija palaista un nevar tikt iesākta. Lūdzu, pārbaudiet "
-"konfigurāciju un aparatūru. Tad mēģiniet konfigurēt attālināto printeri "
-"vēlreiz."
+"   <Tab>/<Alt-Tab> pāriet | <Space> izvēlēties | <F12> uz nākamo ekrānu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configure the network now"
-msgstr "Tūlīt konfigurēt tīklu"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Go on without configuring the network"
-msgstr "Turpināt bez tīkla konfigurēšanas"
+msgid "Zimbabwe"
+msgstr "Zimbabve"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Jūs konfigurēsiet attālinātu printeri. Tam nepieciešama attālināta tīkla "
-"pieeja, bet tīkls vēl nav nokonfigurēts. Ja turpināsiet bez tīkla "
-"konfigurācijas, jūs nevarēsiet lietot printeri, kuru tagad konfigurējat. "
-"Vēlaties turpināt?"
+msgid "Please enter the host name or IP."
+msgstr "Lūdzu, ievadiet osta vārdu vai IP."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Network functionality not configured"
-msgstr "Tīkla funkcionalitāte nav konfigurēta"
+msgid "When"
+msgstr "Kad"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Starting network..."
-msgstr "tiek sākts tīkls..."
+msgid "Second DNS Server (optional)"
+msgstr "Otrais DNS serveris (neobligāts)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Refreshing printer data..."
-msgstr "Atsvaidzinu printera datus..."
+msgid "Finland"
+msgstr "Somija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
-"Jūs pārlikāt savu iepriekš noklusēto printeri (\"%s\"), vai tam jābūt "
-"noklusētajam printerim arī zem jaunās drukāšanas sistēmas %s?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Transfer printer configuration"
-msgstr "Pārsūtu printera konfigurāciju"
+msgid "Color depth: %s\n"
+msgstr "Krāsu dziļums: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Transferring %s..."
-msgstr "Pārvietoju %s..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Jūs nevarat atteikties no šīs pakotnes. To ir nepieciešams uzlabot"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "New printer name"
-msgstr "Jauns printera nosaukums"
+msgid "Loading from floppy"
+msgstr "Ielādēju no disketes"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
-"Printeris \"%s\" jau eksistē,\n"
-"vai tiešām vēlaties pārrakstīt tā konfigurāciju?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Printera vārdam jāsatur tikai burtus, ciparus un pasvītrojumu"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Transfer"
-msgstr "Pārcelšana"
+msgid "Slovenia"
+msgstr "Slovēnija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
 msgstr ""
-"Printeris ar vārdu \"%s\" jau eksistē zem %s. \n"
-"Klikšķiniet uz \"Pārlikt\" lai pārrakstītu to.\n"
-"Jūs varat arī ierakstīt jaunu vārdu, vai izlaist šo printeri."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Nepārcelt printerus"
+"Ievadiet lietotāju\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
 msgstr ""
-"\n"
-"Atzīmējiet printerus, kurus vēlaties pārcelt, un\n"
-"klikšķiniet uz \"Pārcelt\"."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
+msgid "ProgressBar color selection"
+msgstr "ProgresaJoslas krāsas izvēle"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
 msgstr ""
-"Papildus, drukāšanas rindas, kas nav izveidotas ar šo programmu vai "
-"\"foomatic-configure\", nevar pārlikt"
+"Šeit ir dažādi sāknēšanas ieraksti.\n"
+"Jūs varat pievienot jaunus vai izmainīt esošos."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD un LPRng neatbalsta IPP printerus.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ atbalsta tikai lokālos printerus, attālinātus LPD printerus, un kontakta/"
-"TCP printerus.\n"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS neatbalsta printerus uz Novell serveriem, vai printerus, kas sūta datus "
-"brīvi formētā komandā.\n"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
+"Palaiž komandas, kas ir ieplānotas noteiktā laikā, izmantojot at komandu,\n"
+"kā arī palaiž komadu paketes, kad vidējā sistēmas noslodze ir pietiekoši\n"
+"zema."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+msgid "Radio support:"
+msgstr "Radio atbalsts:"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+#, fuzzy, c-format
+msgid "Installing SANE packages..."
+msgstr "Instalēju pakotnes..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Printing test page(s)..."
-msgstr "Tiek drukāta(s) izmēģinājuma lapa(s)..."
+msgid "boot disk creation"
+msgstr "sāknēšanas diska veidošana"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Print option list"
-msgstr "Printera opciju saraksts"
+msgid "LDAP"
+msgstr "LDAP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drukāju uz printeri \"%s\""
+msgid "SILO"
+msgstr "SILO"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Drukāšana/piekļuve foto kartēm uz \"%s\""
+msgid "Change type"
+msgstr "Mainīt tipu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Drukāšana/skenēšana uz \"%s\""
+msgid "SILO Installation"
+msgstr "SILO instalēšana"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Drukāšana/skenēšana/foto kartes uz \"%s\""
+msgid "Use CD/DVDROM to backup"
+msgstr "Lietot CD/DVDROM dublēšanai"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_messages.pm:1
+#, c-format
 msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
 "\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
 msgstr ""
-"Lai saņemtu patreizējam printerim pieejamo opciju sarakstu, klikšķiniet uz "
-"\"Drukāšanas opciju saraksts\" pogas."
+"Apsveicam, instalēšana ir pabeigta.\n"
+"Izņemiet sāknēšanas datu nesēju un nospiediet ievadu, lai pārstartētu "
+"datoru.\n"
+"\n"
+"\n"
+"Lai saņemtu informāciju par labojumiem, kas ir pieejami šim Mandrake Linux\n"
+"izdevumam, skatiet Errata failu, kas atrodams\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Informācija par jūsu sistēmas konfigurēšanu ir pieejama Oficiālās\n"
+"Mandrake Linux rokasgrāmatas pēcinstalēšanas nodaļā."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
+msgid "paranoid"
+msgstr "paranoisks"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "Send mail report after each backup to:"
+msgstr "Pēc katras rezerves kopēšanas sūtīt vēstuli uz:"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
@@ -10435,254 +10408,215 @@ msgid ""
 "because the file to print is provided by the application.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Resolution"
+msgstr "Izšķirtspēja"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
 msgstr ""
-"Lai saņemtu patreizējam printerim pieejamo opciju sarakstu, klikšķiniet uz "
-"\"Drukāšanas opciju saraksts\" pogas."
+"Lai drukātu ar SMB printeri, jums jānorāda SMB hosta vārds (Piezīme! Tas var "
+"atšķirties no datora TCP/IP hosta vārda!) un, iespējams, šī servera IP "
+"adrese, kā arī jūs interesējošā printera koplietojuma vārds un atbilstošs "
+"lietotāja vārds, parole un darbgrupas informācija."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Lai izdrukātu failu no komandrindas (termināļa loga), izmantojiet komandu \"%"
-"s <fails>\".\n"
+msgid "reconfigure"
+msgstr "pārkonfigurēt"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
-"Šis ir patreizējam printerim pieejamo opciju saraksts:\n"
-"\n"
+"Jūsu karte spēj nodrošināt 3D akselerāciju ar XFree %s.\n"
+"ŅEMIET VĒRĀ, KA TAS IR EKSPERIMENTĀLS ATBALSTS, KAS VAR UZKĀRT DATORU."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Xinetd Service"
+msgstr "Xinetd serviss"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "piekļuve tīkla rīkiem"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
 msgstr ""
+"Mandrake Linux 9.1 ļauj Jums lietot pašu pēdējo programmnodrošinājumu, lai "
+"atskaņotu audio failus, rediģētu un uzturētu attēlus jeb fotogrāfijas, un "
+"apskatītu video"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Did it work properly?"
-msgstr "Vai izdrukāja pareizi?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
 msgstr ""
-"Izmēģinājuma lapa(s) ir nosūtīta(s) printerim.\n"
-"Var paiet zināms laiks, pirms printeris sāk drukāt.\n"
+"Kļūda, instalējot aboot, \n"
+"vai instalēt piespiedu kārtā pat tad, ja tiks iznīcināta pirmā sadaļa?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
 "\n"
-msgstr ""
-"Izmēģinājuma lapa(s) ir nosūtīta(s) printerim.\n"
-"Var paiet zināms laiks, pirms printeris sāk drukāt.\n"
-"Drukāšanas stāvoklis:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
 "\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
+"\n"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not print any test page"
-msgstr "Nedrukāt nevienu izmēģinājuma lapu"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Foto izmēģinājuma lapa"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternatīva izmēģinājuma lapa (A4)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternatīva izmēģinājuma lapa (Letter)"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Atjaunot izvēlētos\n"
+"failus"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Standard test page"
-msgstr "Standarta izmēģinājuma lapa"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Print"
-msgstr "Drukāt"
+msgid "Please fill or check the field below"
+msgstr "Lūdzu aizpildiet vai izvēlietis lauku"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "No test pages"
-msgstr "Bez izmēģinājuma lapām"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Vai vēlaties saglabāt /etc/fstab izmaiņas"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
+msgid "Boot Protocol"
+msgstr "Sāknēšanas protokols"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Test pages"
-msgstr "Izmēģinājuma lapas"
+msgid "LVM-disks %s\n"
+msgstr "LVM-diski %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Vai vēlaties norādīt printeri (\"%s\")\n"
-"kā noklusēto printeri?"
+msgid "The package %s is needed. Install it?"
+msgstr "Ir nepieciešama pakotne %s. Instalēt to?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s ir ārpus diapazona!"
+msgid "On boot"
+msgstr "Sāknēšanas laikā"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcijai %s ir jābūt skaitlim!"
+msgid "Bus identification"
+msgstr "Kopnes identifikācija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcijai %s ir jābūt veselam skaitlim!"
+msgid "Please make a backup of your data first"
+msgstr "Vispirms izveidojiet datu rezerves kopiju"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Printera modeļa izvēle"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
+msgid "Vatican"
+msgstr "Latviešu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Jums ir vairāk nekā viens cietais disks, uz kura jūs instalējat linux?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "Boot ISO"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfigurācija"
+msgid "Eritrea"
+msgstr "Eritreja"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+msgid "Remove List"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter konfigurācija"
+msgid "Inuktitut"
+msgstr "Inuktitut"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ja jūsu printeris nav sarakstā, izvēlieties kādu savietojamu (skatieties "
-"printera rokasgrāmatā) vai līdzīgu."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Lūdzu pārbaudiet, vai Printerdrake pareizi automātiski noteica Jūsu printera "
-"modeli. Meklējiet pareizo printeri sarakstā"
+msgid "Morocco"
+msgstr "Maroka"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
@@ -10691,525 +10625,420 @@ msgstr "Kāds ir jūsu printera modelis?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer model selection"
-msgstr "Printera modeļa izvēle"
+msgid "Add a new printer"
+msgstr "Pievienot jaunu printeri"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Reading printer database..."
-msgstr "Nolasu printeru datubāzi..."
+msgid "          All of your selected data have been          "
+msgstr "          Visi Jūsu izvēlētie dati tika                "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Select model manually"
-msgstr "Manuāli izvēlieties modeli"
+msgid "<-- Delete"
+msgstr "<-- Izdzēst"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The model is correct"
-msgstr "Modelis ir pareizs"
+msgid "Nepal"
+msgstr "Nepāla"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "cpu # "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Your printer model"
-msgstr "Jūsu printera modelis"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Preparing printer database..."
-msgstr "Sagatavoju printeru datubāzi..."
+msgid "chunk size"
+msgstr "gabala izmērs"
 
-#: ../../printer/printerdrake.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Location"
-msgstr "Atrašanās vieta"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "komandas pirms saakneesanas, vai 'c', lai izsauktu komandrindu."
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Description"
-msgstr "Apraksts"
+msgid "Problems installing package %s"
+msgstr "Problēmas, instalējot pakotni %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Name of printer"
-msgstr "Printera nosaukums"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Jūs saņemsit trauksmes signālu, kad noslodze pārsniegs šo vērtību"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
-"Katram printerim nepieciešams vārds (piemēram, \"printeris\"). Apraksta un "
-"Atrašanās vietas laukus nav nepieciešams aizpildīt, tie ir kā komentāri "
-"lietotājiem."
+"\n"
+"\n"
+"Lai nosūtītu kļūdu ziņojumu, noklikšķiniet uz pogas Ziņot.\n"
+"Tas atvērs web pārlūka logu uz https://drakbug.mandrakesoft.com\n"
+" kur Jūs atradīsiet aizpildāmo formu. Augstāk attēlotā infromācija tiks\n"
+"pārvietota uz šo serveri\n"
+"\n"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add a scanner manually"
+msgstr "Izvēlēties lietotāju manuāli"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Reload partition table"
+msgstr "Pārlādēt sadaļu tabulu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Jā, gribu automātiski pieslēgties ar šo (lietotājs, darba virsma)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ", daudzfunkcionāla ierīce"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Instalēju pakotnes..."
+msgid "Search for fonts in installed list"
+msgstr "Meklēt instalēto fontu sarakstā"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Instalēju pakotnes..."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Lokālais tīkls nebeidzās ar `.0', programma tiek pabeigta."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instalēju pakotnes..."
+msgid "Boot"
+msgstr "Sakne"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "Jāievada pareizs URI!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Domēna nosaukums"
+msgid "Tuner type:"
+msgstr "Uztvērēja tips:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr ", lietojot komandu %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Atklātais modelis: %s %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Jāievada pareizs URI!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Printer Device URI"
-msgstr "Printera ierīces URI"
+msgid "\"Menu\" key"
+msgstr "\"Menu\" taustiņš"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
 msgstr ""
-"Jūs varat norādīt tiešu URI, lai piekļūtu printerim. URI pilnībā jāatbilst "
-"CUPS vai Foomatic specifikācijām. Ņemiet vērā, ka ne visi URI tipi atbilst "
-"atbalstītajiem drukas spolētājiem."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Ports"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Printera resursa vārds vai IP"
+"\n"
+"\n"
+"Lūdzu pārbaudiet, vai Printerdrake pareizi automātiski noteica Jūsu printera "
+"modeli. Meklējiet pareizo printeri sarakstā"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "The port number should be an integer!"
-msgstr "Porta numuram ir jābūt skaitlim!"
+msgid "Security Administrator:"
+msgstr "Drošības administrators:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Nav printera resursa vārda vai IP!"
+msgid "Please enter your login"
+msgstr "Lūdzu, ievadiet Jūsu lietotāja vārdu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+msgid "if set to yes, check permissions of files in the users' home."
 msgstr ""
-"Lai drukātu ar TCP vai socket printeri, jums ir jānorāda printera hosta "
-"nosaukums tīklā un papildus arī porta numurs (pēc noklusēšanas 9100). HP "
-"JetDirect serveriem porta numurs parasti ir 9100, uz citiem serveriem tas "
-"var būt savādāks. Apskatiet Jūsu aparatūras rokasgrāmatu."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
-"Izvēlieties vienu no automātiski noteiktajiem printeriem sarakstā, un "
-"ievadiet hosta vārdu vai IP, un neobligāti porta numuru (noklusētais ir "
-"9100) ievades laukos."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket printera opcijas"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Hosts \"%s\", ports %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", hosts \"%s\", ports %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Scanning network..."
-msgstr "Meklēju tīklā..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Printeru automātiska noteikšana"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "Trūkst NCP rindas vārds!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP server name missing!"
-msgstr "Trūkst NCP servera vārds!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Printera rindas nosaukums"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Printera serveris"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+msgid "Fonts copy"
 msgstr ""
-"Lai drukātu ar NetWare printeri, jums jānorāda NetWare printera servera "
-"vārds (Piezīme! tas var atšķirties no servera TCP/IP hosta nosaukuma!), kā "
-"arī jūsu izvēlētā printera rindas nosaukums un jebkurš derīgs lietotāja "
-"vārds un parole."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare printera opcijas"
+msgid "Automated"
+msgstr "Automātisks"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Savienojiet Jūsu printeri ar Linux serveri, un ļaujiet Windows datoriem "
-"pieslēgties tam kā klientiem.\n"
-"\n"
-"Vai tiešām vēlaties turpināt uzstādīt printeri tā, kā darat to tagad?"
+msgid "Do you want to test the configuration?"
+msgstr "Vai vēlaties izmēģināt šo konfigurāciju?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
 msgstr ""
-"Uzstādiet Windows serveri, lai izveidotu printeri pieejamu zem IPP "
-"protokola, un uztādiet drukāšanu no šī datora ar \"%s\" pieslēguma tipu "
-"programmā Printerdrake.\n"
+"Printeris \"%s\" tika veiksmīgi noņemts no Star Office/OpenOffice.org/GIMP."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
 "\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SECURITY WARNING!"
-msgstr "DROŠĪBAS BRĪDINĀJUMS!"
+msgid "Save packages selection"
+msgstr "Saglabāt pakotņu izvēli"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Samba share name missing!"
-msgstr ""
+msgid "Remove the last item"
+msgstr "Noņemt pēdējo vienību"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Jābūt dotam vai nu servera vārdam, vai servera IP!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Lietotāju saraksts priekš atjaunošanas (tikai pats jaunākais datums katram "
+"lietotājam ir svarīgs)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detected"
-msgstr "Automātiska noteikšana"
+msgid "No net boot images created!"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Workgroup"
-msgstr "Darba grupa"
+msgid "use pptp"
+msgstr "izmantot pptp"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Share name"
-msgstr "Koplietojuma vārds"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Izvēlēties, kurus servisus vajag automātiski startēt ielādes laikā"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB servera IP"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Uzziniet, kā izmantot šo printeri"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SMB server host"
-msgstr "SMB servera resurss"
+msgid "Configure the network now"
+msgstr "Tūlīt konfigurēt tīklu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Vēlamais printeris netika noteikts automātiski, vienkārši izvēlieties to no "
-"saraksta un tad pievienojiet lietotāja vārdu, paroli un darbagrupu, ja "
-"nepieciešams."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Izvēlieties spoguļserveri, no kura ņemt pakotnes"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
-"Lai drukātu ar SMB printeri, jums jānorāda SMB hosta vārds (Piezīme! Tas var "
-"atšķirties no datora TCP/IP hosta vārda!) un, iespējams, šī servera IP "
-"adrese, kā arī jūs interesējošā printera koplietojuma vārds un atbilstošs "
-"lietotāja vārds, parole un darbgrupas informācija."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printera opcijas"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Printeris \"%s\" uz servera \"%s\""
+"FAT izmēra mainītājs nespēj izmainīt jūsu sadaļu,\n"
+"atklāta sekojoša kļūda: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", printeris \"%s\" pie servera \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Uz kuru sektoru vēlaties to pārvietot?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Remote printer name missing!"
-msgstr "Nav attālā printera nosaukuma!"
+msgid "Do you want to click on this button?"
+msgstr "Vai vēlaties uzklikšķināt uz šīs pogas?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remote host name missing!"
-msgstr "Nav attālā resursa nosaukuma!"
+msgid "Bahamas"
+msgstr "Bahamu salas"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote printer name"
-msgstr "Attālā printera nosaukums"
+msgid "Manual configuration"
+msgstr "Manuāla konfigurēšana"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Remote host name"
-msgstr "Attālā resursa nosaukums"
+msgid "search"
+msgstr "meklēt"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
 msgstr ""
-"Lai izmantotu attālu lpd printeri, jums ir jānorāda printera servera "
-"nosaukums un printera nosaukums uz šī servera."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Attāla lpd printera opcijas"
+"Šī pakotne ielādē izvēlēto tastatūras karti, kas norādīta failā\n"
+"/etc/sysconfig/keyboard. To var izvēlēties, izmantojot programmu kbdconfig.\n"
+"Vairumā gadījumu šo pakotni ir jāatstāj izvēlētu."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Manual configuration"
-msgstr "Manuāla konfigurēšana"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instalācijas displeja draiveris)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Jums ir jānorāda/jāievada printeris/ierīce!"
+msgid "Zeroconf host name must not contain a ."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
-" (Paralēlie porti: /dev/lp0, /dev/lp1, ..., ekvivalenti LPT1:, LPT2:, ..., "
-"1. USB printeris: /dev/usb/lp0, 2. USB printeris: /dev/usb/lp1, ...)."
+"Syslog ir mehānisms, ko daudzi demoni izmanto ziņojumu grāmatošanai\n"
+"daudzos sistēmas žurnālu failos. Ir gudra doma vienmēr darbināt syslog."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown/Others"
+msgstr "Nezināma|vispārēja"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Lūdzu norādiet portu, kuram ir pievienots printeris."
+msgid "No TV Card detected!"
+msgstr "Nav atrasta TV karte!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Lūdzu, izvēlieties portu, pie kura Jūsu printeris ir pieslēgts, vai ievadiet "
-"ierīces/faila vārdu ievades rindā"
+msgid "Options"
+msgstr "Opcijas"
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Lūdzu norādiet portu, kuram ir pievienots printeris."
+#, c-format
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Printeris \"%s\" tagad ir uzstādīts kā noklusētais printeris."
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
 msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
 msgstr ""
-"Šis ir automātiski noteikto printeru saraksts. Lūdzu, izvēlieties printeri, "
-"kuru vēlaties uzstādīt. Printera konfigurēšana darbosies pilnībā "
-"automātiski. Ja printeris netika noteikts pareizi, vai ja vēlaties piemērotu "
-"printera konfigurāciju, ieslēdziet \"Manuāla konfigurēšana\"."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "Auto-detected"
+msgstr "Automātiska noteikšana"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
 msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Sekojošais printeris tika automātiski noteikts. Printera konfigurēšana "
-"darbosies pilnībā automātiski. Ja printeris netika noteikts pareizi, vai ja "
-"vēlaties piemērotu printera konfigurāciju, ieslēdziet \"Manuāla konfigurēšana"
-"\"."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
-"Sekojoši printeri\n"
+"Jūs taisaties konfigurēt jūsu datoru Interneta savienojuma koplietošanai.\n"
+"Ar šo iespēju datoru var konfigurēt tā, lai kopīgi izmantotu Interneta "
+"savienojumu.\n"
 "\n"
+"Piezīme: jums ir nepieciešams atsevišķs tīkla adapteris, lai uzstādītu "
+"lokālo datortīklu (LAN).\n"
+"\n"
+"Vai vēlaties uzstādīt Interneta savienojuma koplietošanu?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
 msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
-"Lūdzu, izvēlieties portu, pie kura Jūsu printeris ir pieslēgts, vai ievadiet "
-"ierīces/faila vārdu ievades rindā"
+"Nav 1MB brīvas vietas sāknēšanas programmai! Instalēšana turpināsies, bet "
+"lai ielādētu sistēmu, Jums būs nepieciešams izveidot sāknēšanas programmas "
+"disaka sadaļu programmā DiskDrake"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
@@ -11220,895 +11049,734 @@ msgstr ""
 "Lūdzu, izvēlieties portu, pie kura Jūsu printeris ir pieslēgts, vai ievadiet "
 "ierīces/faila vārdu ievades rindā"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Lūdzu, izvēlieties portu, pie kura Jūsu printeris ir pieslēgts, vai ievadiet "
-"ierīces/faila vārdu ievades rindā"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Noraidīt"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
 msgstr ""
-"Sekojošais printeris tika automātiski noteikts, ja tas nav tas, kuru "
-"vēlaties konfigurēt, ievadiet ierīces/faila vārdu ievades rindā"
+"HardDrake veic aparatūras aptauju, un opcionāli konfigurē\n"
+"jauno/izmainīto aparatūru."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
 #, c-format
-msgid "Available printers"
-msgstr "Pieejamie printeri"
+msgid "Remote Printers"
+msgstr "Attāls printeris"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "No printer found!"
-msgstr "Printeris nav atrasts!"
+msgid "Creating and formatting file %s"
+msgstr "Veidoju un formatēju failu %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "You must enter a device or file name!"
-msgstr "Jums ir jāievada ierīces vai faila nosaukums!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
 msgstr ""
-"Lokālais printeris netika atrasts! Lai manuāli instalētu printeri, ievadiet "
-"ierīces/faila vārdu ievades rindā (Paralēlie porti: /dev/lp0, /dev/lp1, ..., "
-"ekvivalenti LPT1:, LPT2:, ..., 1. USB printeris: /dev/usb/lp0, 2. USB "
-"printeris: /dev/usb/lp1, ...)."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Local Printer"
-msgstr "Lokāls printeris"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "USB printeris \\/*%s"
+msgid "Choose an existing LVM to add to"
+msgstr "Norādiet jau esošu LVM kam pievienot"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Printeris uz paralēlā porta \\/*%s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "xfs restart"
+msgstr "xfs pārstartēšana"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Printeris \"%s\" uz SMB/Windows servera \"%s\""
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Printeris \"%s\" jau eksistē,\n"
+"vai tiešām vēlaties pārrakstīt tā konfigurāciju?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Tīkla printeris \"%s\", ports %s"
+msgid "No partition available"
+msgstr "Nav pieejamu sadaļu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Detected %s"
-msgstr "Atklāts %s"
+msgid "Use the scanners on hosts: "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ". printeris \"%s\" uz SMB/Windows servera \"%s\""
+msgid "Unselected All"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Domain Name Resolver"
+msgstr "Domēna vārdu atrisinātājs"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", tīkla printeris \"%s\", ports %s"
+msgid "Encryption key (again)"
+msgstr "Šifrēšanas atslēga (vēlreiz)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Automātiski noteikt printerus, kas pievienoti datoriem ar Microsoft Windows"
+msgid "True Type install done"
+msgstr "True Type instalēšana pabeigta"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Automātiski noteikt printerus, kas pa tiešo pievienoti lokālajam tīklam"
+msgid "Detection in progress"
+msgstr "Notiek noteikšana"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Automātiski noteikt šim datoram pievienotos printerus"
+msgid "Build Whole Kernel -->"
+msgstr "Būvēt visu kodolu -->"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+msgid "Welcome to %s"
+msgstr "Jūs sveic %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Lūdzu ievietojiet Atjaunināšanas moduļu disketi iekārtā %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
+"The following printer\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"%s%s\n"
+"is directly connected to your system"
 msgstr ""
 "\n"
-"Laipni lūdzam pie Printera uzstādīšanas meistara\n"
-"\n"
-"Šis meistars ļaus Jums instalēt lokālos vai attālinātos printerus, lai "
-"lietotu tos no šī datora, vai no citiem datoriem tīklā.\n"
-"\n"
-"Tas pajautās visu nepieciešamo informāciju, lai uzstādītu printeri, un dos "
-"pieeju pie pieejamajiem printeru draiveriem un savienojumu ipiem."
+"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Failu koplietošana"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ")"
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
+"Dažos gadījumos %s draiverim ir jānorāda papildus informācija, lai tas\n"
+"darbotos pareizi, tomēr parasti tā nav vajadzīga. Vai vēlaties norādīt\n"
+"papildus parametrus, vai arī ļausit draiverim aptaujāt datoru un savākt\n"
+"nepieciešamo informāciju? Retos gadījumos aptaujāšana var uzkārt datoru,\n"
+"taču tas neradīs nekādus bojājumus."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid " on "
+msgid "Not the correct CD label. Disk is labelled %s."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "("
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"Laipni lūdzam Interneta savienojuma koplietošansa utilītā!\n"
+"\n"
+"%s\n"
+"\n"
+"Klikšķiniet uz Konfigurēt, lai palaistu uzstādīšanas meistaru."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Konfigurēju printeri \"%s\"..."
+#: ../../lang.pm:1
+#, c-format
+msgid "Cuba"
+msgstr "Kuba"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid "Searching for new printers..."
 msgstr "Pieejamie printeri"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"PIEZĪME: Atkarībā no printera modeļa un drukāšanas sistēmas, tiks instalēti %"
-"d MB papildus programmatūras."
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Vai tiešām vēlaties uzstādīt drukāšanu uz šī datora?\n"
+msgid "Belize"
+msgstr "Beliza"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Vai vēlaties ieslēgt drukāšanu uz augstāk norādītajiem printeriem?\n"
+msgid " (multi-session)"
+msgstr " (vairāku sesiju)"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Vai vēlaties ieslēgt drukāšanu uz lokālā tīkla printeriem?\n"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Kernel Boot Timeout"
+msgstr "Kerneļa ielādes taimauts"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
-"Vai vēlaties atļaut drukāšanu uz augstāk minētajiem printeriem, vai uz "
-"printeriem lokālajā tīklā?\n"
+"Jūsu karte spēj nodrošināt 3D akselerāciju, bet tikai ar XFree %s.\n"
+"Jūsu karti uztur XFree %s, kam var būt labāks 2D atbalsts."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "(Pārliecinieties, ka visi jūsu printeri ir pievienoti un ieslēgti).\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX sadaļu veidošanas meistars atrada sekojošus risinājumus:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Netika atrasti printeri, kas tieši pieslēgti Jūsu datoram"
+msgid "Hungarian"
+msgstr "Ungārijas"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
-"\n"
-"Jūsu sistēmai ir tieši pievienoti %d nezināmi printeri"
+"Izvēlieties pakalpojumu sniedzēju.\n"
+" Ja tas nav šajā sarakstā, izvēlietis Nav sarakstā"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automātiska laika sinhronizācija (izmantojot NTP)"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"\n"
-"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"\n"
-"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "LDAP serveris"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
 msgstr ""
-"\n"
-"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
+"PCMCIA atbalsts parasti ir paredzēts, piemēram, tīkla karšu un modēmu\n"
+"uzturēšanai pārnēsājamos datoros. Tas netiks startēts, ja nav konfigurēts,\n"
+"tāpēc ir droši to instalēt datoros, kam tas nav nepieciešams."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr ""
-"\n"
-"un %d nezināmi printeri ir"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Choose your country"
+msgstr "Izvēlieties valsti"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- System Files:\n"
 msgstr ""
 "\n"
-"un viens nezināms printeris ir"
+"- Sistēmas faili:\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Checking your system..."
-msgstr "Pārbaudu jūsu sistēmu..."
+msgid "Standalone Tools"
+msgstr "Nesaistīti rīki"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Pārstartēt XFS"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Where"
+msgstr "Kur"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "but not matching"
+msgstr "bet nesakrīt"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
 msgstr ""
+"Šeit Jūs varat izvēlēties alternatīvu draiveri (vai nu OSS vai ALSA) priekš "
+"Jūsu skaņu kartes (%s)."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Modelis ir pareizs"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Trūkst NCP servera vārds!"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Konfigurēju PCMCIA kartes..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "trūkstošs kdesu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
+msgid "Encryption key"
+msgstr "Šifrēšanas atslēga"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Printeris uz attāla CUPS servera"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr " Noņemt atzīmētos"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Ziemsvētku sala"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "atklāts %s"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Sāknētāja instalēšana neizdevās. Atklāta šāda kļūda:"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Pievienot lietotāju"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI kanāls"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Uzstādīt šo printeri ka noklusēto"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "partition %s"
+msgstr "sadaļa %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoisks"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Host/network IP address missing."
-msgstr ""
+msgid "<-- Del User"
+msgstr "<-- Dzēst lietotāju"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Pieejamie printeri"
+#, c-format
+msgid "No printer found!"
+msgstr "Printeris nav atrasts!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr " Noņemt atzīmētos"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Edit selected host/network"
-msgstr ""
+msgid "the vendor name of the device"
+msgstr "ierīces pārdevēja nosaukums"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Izdzēst visu disku"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Noklusēts)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automātiska CUPS konfigurēšana"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Drukas sistēmas nomaiņa"
+msgid "Automatic reconfiguration"
+msgstr "Automātiska pārkonfigurēšana"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Receiving Speed:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Izdarīts"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "Uz CUPS servera \"%s\""
+#: ../../lang.pm:1
+#, c-format
+msgid "Turks and Caicos Islands"
+msgstr "Tērksa un Kaikosa salas"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(pie šī datora)"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "permissions"
+msgstr "tiesības"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "trauksmes konfigurācija"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Atpakaļ"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Failu koplietošana"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Interneta savienojuma koplietošanas konfigurācija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Sakārtots vienā sarakstā vai pa grupām"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "Tēmas"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opcijas: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"Jūs pašlaik lietojat OS ielādētāju %s.\n"
+"Spiediet Konfigurēt, lai palaistu uzstādīšanas meistaru."
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
+#, c-format
+msgid "OKI winprinter configuration"
 msgstr "OKI winprinter konfigurācija"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Printeru automātiska noteikšana (lokāli, TCP/Socket un SMB printeri)"
+msgid "Saint Helena"
+msgstr "Svētās Helēnas sala"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
+msgid "Security Level"
+msgstr "Drošības līmenis:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
+"Daži soļi nav izpildīti.\n"
 "\n"
-"Šeit jums NAV jākonfigurē attāla CUPS servera printeri; šie printeri tiks "
-"noteikti automātiski."
+"Vai tiešām vēlaties iziet tūlīt?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "How is the printer connected?"
-msgstr "Kā šis printeris ir pievienots?"
+msgid "Sudan"
+msgstr "Sudāna"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "Izvēlieties printera savienojumu"
+msgid "Polish (qwertz layout)"
+msgstr "Polijas (qwertz izvietojums)"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Surinama"
 
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+# 
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
 "\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the shell timeout. A value of zero means no timeout."
 msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Juus sveic %s, opereetaajsisteemu paarsleedzeejs!\n"
+"\n"
+"Sarakstaa izveelieties vajadziigo sisteemu vai gaidiet %d sekundes, liidz "
+"tiks ielaadeeta nokluseetaa sisteema.\n"
 "\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugāles"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Loopback faila vārds: "
 
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "DNS servera adreses formātam jābūt 1.2.3.4"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "seriāla"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Newzealand"
+msgstr "Jaunzēlande"
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Šim katalogam ir jāpaliek saknes failsistēmā"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "CapsLock key"
+msgstr "CapsLock taustiņš"
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Sāknētāja instalēšana"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Izvēlieties grafiskās kartes atmiņas apjomu"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "Dynamic IP Address Pool:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM vārds?"
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Dažas iekārtas no \"%s\" aparatūras klases tika izņemtas:\n"
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Atrasti %s %s interfeisi"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+msgid "sticky-bit"
+msgstr "sticky-bit"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "Post Install"
+msgstr "Pēcinstalācijas"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "The internal domain name"
+msgstr "Ieksējais domēna vārds"
 
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Kartes IRQ"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
 "\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Norādiet diskešu iekārtu, ko izmanto distetes veidošanai"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO ar teksta izvēlni"
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "Viss (bez ugunsmūra)"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Jums jānorāda kodola attēls"
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", daudzfunkcionāla ierīce pie USB"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Uz leju"
 
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Pieslēdzos spoguļserverim, lai saņemtu pieejamo pakotņu sarakstu"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lietuvas AZERTY (vecā)"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazīlijas (ABNT-2)"
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO instalēšana"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "Saint Vincent and the Grenadines"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Fails/_Atvērt"
 
 #: ../../security/help.pm:1
 #, c-format
@@ -12119,843 +11787,714 @@ msgid ""
 "to the X server on the tcp port 6000 or not."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Creating auto install floppy"
+
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+msgid "Open Firmware Delay"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "Hungary"
+msgstr "Ungārija"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "Total progess"
+msgstr "Kopējais progress"
 
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "trauksmes konfigurācija"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "New Zealand"
+msgstr "Jaunzēlande"
 
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "please choose the date to restore"
+msgstr "lūdzu, izvēlieties datus, kurus atjaunot"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "Pārslēgšanās no ext2 uz ext3"
 
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Holandes Antiļas"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Browse to new restore repository."
+msgstr "Pārlūkot citu atjaunošanas repozitoriju."
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
 "\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
+"\n"
+"Laipni lūdzam pie Printera uzstādīšanas meistara\n"
+"\n"
+"Šis meistars ļaus Jums instalēt lokālos vai attālinātos printerus, lai "
+"lietotu tos no šī datora, vai no citiem datoriem tīklā.\n"
+"\n"
+"Tas pajautās visu nepieciešamo informāciju, lai uzstādītu printeri, un dos "
+"pieeju pie pieejamajiem printeru draiveriem un savienojumu ipiem."
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Drošības administrators (lietotāju vai pasta)"
+msgid "and %d unknown printers"
+msgstr ""
+"\n"
+"un %d nezināmi printeri ir"
 
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
-"Bibliotēka, kas aizsargā pret bufera pārpildīšanas un rindas formāta "
-"uzbrukumiem."
 
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Use libsafe for servers"
-msgstr "Lietot libsafe priekš serveriem"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr ""
+"Nav atrasta neviena ISDN PCI karte. Lūdzu izvēlieties kādu no saraksta."
 
-#: ../../security/level.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Security level"
-msgstr "Drošības līmenis"
+msgid "GB"
+msgstr "GB"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please choose the desired security level"
-msgstr "Izvēlieties vēlamo drošības līmeni?"
+msgid "Please give a user name"
+msgstr "Lūdzu ievadiet lietotāja vārdu"
 
-#: ../../security/level.pm:1
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec pamata opcijas"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable CD Boot?"
+msgstr "Atļaut CD ielādi?"
 
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Šis ir līdzīgs iepriekšējam līmenim, bet sistēma ir pilnībā slēgta un "
-"drošības iespējas ir pašas maksimālākās."
+msgid " enter `void' for void entry"
+msgstr " ievadiet `void' priekš tukša ieraksta"
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Ar šo drošības līmeni sistēmu var sākt izmantot kā serveri.\n"
-"Drošība tagad ir pietiekoši stipra, lai izmantotu sistēmu kā serveri, kas\n"
-"apkalpo savienojumus no daudziem klientiem. Piezīme: ja jūsu dators "
-"darbojas\n"
-"tikai kā klients Internetā, Jums vajadzētu izvēlēties mazāku drošības līmeni."
+msgid "on Hard Drive"
+msgstr "uz cietā diska"
 
-#: ../../security/level.pm:1
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Parasts modēma savienojums"
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
 msgstr ""
-"Šis ir parasts drošības līmenis, kas ir ieteicams datoram, kas tiks\n"
-"izmantots, lai savienotos ar Internetu kā klients."
 
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
 msgstr ""
-"Tagad tiek izmantota parole, taču izmantot datoru tīklā vēl aizvien\n"
-"nav ieteicams."
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Šo līmeni ir jāizmanto uzmanīgi. Tas padara jūsu sistēmu vieglāk\n"
-"izmantojamu, taču ļoti nedrošu: to nedrīkst izmantot datoram, kas ir\n"
-"savienots ar citiem datoriem vai Internetam. Netiek prasītas paroles."
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Tagad Jūs varat izpildīt xawtv (zem X Window!) !\n"
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Paranoid"
-msgstr "Paranoisks"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Instalēšanas pabeigšanai nepietiek swap, palieliniet swap"
 
-#: ../../security/level.pm:1
-#, c-format
-msgid "Higher"
-msgstr "Augstāk"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Ports"
 
-#: ../../security/level.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "High"
-msgstr "Augsts"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Poor"
-msgstr "Vājš"
+msgid "Which is your timezone?"
+msgstr "Kāda ir jūsu laika josla?"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "Sveiciens hakeriem"
+msgid "Guinea"
+msgstr "Gvineja"
 
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Lai aktivizētu izmaiņas, lūdzu aizveriet un atveriet %s sesiju"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "Sistēma pašlaik ir savienota ar Internetu."
 
-#: ../../standalone/XFdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lūdzu aizveriet sesiju un nospiediet Ctrl-Alt-BackSpace"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
+msgid "Japan (broadcast)"
+msgstr "Japan (broadcast)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Vispirms jāizveido /etc/dhcpd.conf!"
+msgid "Mozambique"
+msgstr "Mozambika"
 
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Kaut kas neizdevās - vai mkisofs ir instalēts?"
+msgid "Icon"
+msgstr "Ikona"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Please choose what you want to backup"
+msgstr "Lūdzu, izvēlieties, ko vēlaties dublēt"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "No floppy drive available!"
-msgstr "Diskešu iekārta nav pieejama!"
+msgid "256 colors (8 bits)"
+msgstr "256 krāsas (8 biti)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
 #, c-format
-msgid "Floppy can be removed now"
-msgstr "Diskete tagad var tikt izņemta"
+msgid "Read-write"
+msgstr "Lasīt-rakstīt"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Nevarēju piekļūt disketei!"
+msgid "Size: %s\n"
+msgstr "Izmērs: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please insert floppy disk:"
-msgstr "Lūdzu, ievietojiet disketi:"
+msgid "Hostname: "
+msgstr "Resursa vārds: "
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Write Config"
-msgstr "Ierakstīt konfigurāciju"
+msgid "Chunk size %s\n"
+msgstr "Gabala izmērs %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Dynamic IP Address Pool:"
+msgid "Build the future of Linux!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Local Printer"
+msgstr "Lokāls printeris"
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
 msgstr ""
-"Lielākā daļa no šīm vērtībām tika paņemtas\n"
-"no strādājošas sistēmas. Jūs varat izmainīt tās pēc vajadzības"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd servera konfigurācija"
+" Autortiesības (C) 2001 MandrakeSoft, DUPONT Sebastien <dupont_s\\@epita.fr>"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "IP Range End:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "Samba serveris"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Domēna nosaukums"
+msgid "ADSL connection"
+msgstr "ADSL savienojums"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Nav konfigurācijas, lūdzu izvēlieties Meistaru vai Izvērstu.\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Error!"
+msgstr "Kļūda!"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Routers:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Tīkla maska"
+msgid "cable connection detected"
+msgstr "Noteikts kabeļa savienojums"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "Permission denied transferring %s to %s"
+msgstr "Nav dota atļauja pārvietot %s uz %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_Ziņot kļūdu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "dhcpd Config..."
-msgstr "Konfigurēju dhcpd..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "<-- Dzēst klientu"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Dzēst klientu"
+msgid "Resize"
+msgstr "Mainīt izmēru"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Add Client -->"
-msgstr "Pievienot klientu -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "Pielikt/noņemt klientus"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP klients"
+msgid "Dominica"
+msgstr "Dominika"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Tips: "
+msgid "Please enter the device name to use for backup"
+msgstr "Lūdzu ievadiet rezerves kopēšanas ierīces nosaukumu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "<-- Del User"
-msgstr "<-- Dzēst lietotāju"
+msgid "Resolution: %s\n"
+msgstr "Izšķirtspēja: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Add User -->"
-msgstr "Pievienot lietotāju -->"
+msgid "matching"
+msgstr "sakrīt"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
 msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
 msgstr ""
+"Nevar piekļūt kodola moduļiem, atbilstošiem Jūsu kodolam (fails %s nav "
+"atrodams), parasti tas nozīmē, ka ielādes diskete nav sinhronizēta ar "
+"instalācijas datu nesēju (lūdzu izveidojiet jaunāku ielādes disketi)"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Izdzēst visus NBI"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Izdzēst"
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
-msgid "This will take a few minutes."
-msgstr "Tas aizņems dažas minūtes."
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Lūdzu izvēlieties pareizu portu. Piemēram, MS Windows\n"
+"ports COM1 GNU/Linux vidē saucas ttyS0."
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Build All Kernels -->"
-msgstr "Būvēt visus kodolus -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Nav izvēlēta tīkla karte!"
+msgid "The following packages are going to be removed"
+msgstr "Tiks noņemtas sekojošas pakotnes"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
 #, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Connect to the Internet"
+msgstr "Savienoties ar Internetu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "No kernel selected!"
-msgstr "Kodols nav izvēlēts!"
+msgid "Use existing partitions"
+msgstr "Izmantot jau esošu sadaļu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Būvēt visu kodolu -->"
+msgid "Canadian (Quebec)"
+msgstr "Kanādas (Kvebeka)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "Peles ierīce: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Boot Floppy"
+msgid "Reselect correct fonts"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
+"Options Description:\n"
 "\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
 "\n"
 msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\n"
+"opciju apraksts:\n"
 "\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"Lūdzu, esiet uzmanīgi kad lietojat dublēšanu pa FTP, jo tikai\n"
+"jau uzbūvētas rezerves kopijas tiek nosūtītas uz serveri.\n"
+"Tāpēc šobrīd Jums jāizveido rezerves kopija uz sava cietā diska,\n"
+"pirms tās nosūtīšanas uz serveri.\n"
 "\n"
-msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
+"Options\n"
 "\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
-" jauninājumi 2002 MandrakeSoft, Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Visbeidzot, Jums tiks uzdots jautājums vai Jūs vēlaties grafisko saskarni\n"
+"pie ielādes. Šis jautājums tiks Jums uzdots, pat ja Jūs neizvēlējāties\n"
+"pārbaudīt konfigurāciju. Acīmredzot, Jūs vēlaties atbildet \"Nē\" ja šis\n"
+"dators darbosies kā serveris, vai arī neizdevās veiksmīgi paveikt ekrāna\n"
+"konfigurēšanu."
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Add/Del Clients"
-msgstr "Pielikt/noņemt klientus"
+msgid "We are now going to configure the %s connection."
+msgstr "Tagad mēs konfigurēsim %s savienojumu."
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Add/Del Users"
-msgstr "Pielikt/noņemt lietotājus"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Net Boot Images"
+msgid ""
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Printeru automātiska noteikšana"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "netika atrasts neviens fonts.\n"
+
+#: ../../steps.pm:1
 #, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
+msgid "Language"
+msgstr "Valodas izvēle"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Stop Server"
-msgstr "Apturēt serveri"
+msgid "Printer model selection"
+msgstr "Printera modeļa izvēle"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Start Server"
-msgstr "Startēt serveri"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Pēc sadaļas %s tipa nomaiņas visi šajā sadaļā esošie dati tiks pazaudēti"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, c-format
-msgid "Disable Server"
-msgstr "Aizliegt serveri"
+msgid "%d seconds"
+msgstr "%d sekundes"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Enable Server"
-msgstr "Atļaut serveri"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Ielieciet tukšu disketi iekārtā %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Mandrake termināļu servera konfigurācija"
+msgid "A valid URI must be entered!"
+msgstr "Jāievada pareizs URI!"
 
-#: ../../standalone/drakautoinst:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Remove the last item"
-msgstr "Noņemt pēdējo vienību"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Atrasta \"%s\" saskarne, vai vēlaties to lietot?"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Add an item"
-msgstr "Pievienot vienību"
+msgid "Re-configure interface and DHCP server"
+msgstr "Pārkonfigurējiet saskarni un DHCP serveri"
 
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Auto Install"
-msgstr "Automātiska instalēšana"
+msgid "Sound configuration"
+msgstr "Skaņas konfigurācija"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
+msgid "Photo test page"
+msgstr "Foto izmēģinājuma lapa"
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Congratulations!"
-msgstr "Apsveicam!"
+msgid "Custom disk partitioning"
+msgstr "Pielāgots disku sadalījums"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
+msgid "Enter Printer Name and Comments"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
+"The following printers\n"
 "\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
 msgstr ""
+"\n"
+"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "type: %s"
+msgstr "Tips: "
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Creating auto install floppy"
-msgstr "Creating auto install floppy"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovākijas (QWERTY)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid "manual"
-msgstr ""
+msgid "No Sound Card detected!"
+msgstr "Skaņu karte nav atrasta!"
 
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
+msgid "Mouse Port"
+msgstr "Peles ports"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Automatic Steps Configuration"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Atkārtot"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Ftp serveris"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
 "\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Automātiskās instalēšanas konfigurētājs"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "pfm fontu konvertēšana"
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Lūdzu izvēlieties, ar kuru seriālo portu ir saslēgta pele."
 
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Error!"
-msgstr "Kļūda!"
+msgid "Uganda"
+msgstr "Uganda"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (size)\n"
 "\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
-"\n"
-"Rezerves kopiju atjaunošanas problēmas:\n"
-"\n"
-"Atjaunošanas soļa laikā, Drakbackup pārbaudīs visus\n"
-"rezerves kopijas failus pirms atjaunošanas.\n"
-"Pirms atjaunošanas Drakbackup noņems oriģinālo\n"
-"direktoriju, un Jūs zaudēsiet visus datus. Ir svarīgi būt\n"
-"uzmanīgam un nemodificēt rezerves kopijasdatus manuāli.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
 "\n"
-msgstr ""
-"opciju apraksts:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
 "\n"
-"Lūdzu, esiet uzmanīgi kad lietojat dublēšanu pa FTP, jo tikai\n"
-"jau uzbūvētas rezerves kopijas tiek nosūtītas uz serveri.\n"
-"Tāpēc šobrīd Jums jāizveido rezerves kopija uz sava cietā diska,\n"
-"pirms tās nosūtīšanas uz serveri.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
 "\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komoru salas"
+
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"Description:\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
 "\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
 "\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
 "\n"
 "\n"
-msgstr ""
+"Tagad mēs konfigurēsim %s savienojumu.\n"
+"\n"
+"\n"
+"Nospiediet Labi lai turpinātu."
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot režīms"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "ASV (kabelis)"
+
+#: ../../standalone/drakboot:1
+#, c-format
 msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
-" jauninājumi 2002 MandrakeSoft, Stew Benedict <sbenedict\\@mandrakesoft.com>"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Parasta 3 pogu pele"
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" Autortiesības (C) 2001 MandrakeSoft, DUPONT Sebastien <dupont_s\\@epita.fr>"
+#, c-format
+msgid "Select another media to restore from"
+msgstr "Izvēlieties citu mēdiju, no kura atjaunot"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Programmatūras pārvaldnieks"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -12967,4449 +12506,4995 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Re-submit"
+msgstr "Atkārtoti nosūtīt"
+
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
+msgid "CD in place - continue."
+msgstr "CD savā vietā - turpinu."
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" dažas kļūdas pasta sūtīšanas laikā notiek sliktas\n"
-" postfix konfigurācijas dēļ. Lai to atrisinātu, Jums\n"
-" jāiestāda myhostname jeb mydomain failā\n"
-" /etc/postfix/main.cf\n"
-"\n"
+msgid "KB"
+msgstr "KB"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Tīkla interfeiss"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lietuvas \"fonētiskā\" QWERTY"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "Pieejamie printeri"
+
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Plug'n Play pārbaude neizdevās. Lūdzu, izvēlieties precīzu monitoru"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Restore"
-msgstr "Atjaunot"
+msgid "Services and deamons"
+msgstr "Servisi un dēmoni"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup Now"
-msgstr "Sākt dublēšanu"
+msgid "Remote host name missing!"
+msgstr "Nav attālā resursa nosaukuma!"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Advanced Configuration"
-msgstr "Izvērsta konfigurācija"
+msgid "with /usr"
+msgstr "ar /usr"
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Wizard Configuration"
-msgstr "Meistara konfigurācija"
+msgid "Network"
+msgstr "Tīkls"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "View Backup Configuration."
-msgstr "Apskatīt dublēšanas konfigurāciju"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Automātiski noteikt printerus, kas pievienoti datoriem ar Microsoft Windows"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Backup Now from configuration file"
-msgstr "Sākt dublēšanu, izmantojot konfigurācijas failu"
+msgid "This password is too simple"
+msgstr "Šī parole ir pārāk vienkārša"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup konfigurēšana"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovākijas (QWERTZ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "Total Progress"
-msgstr "Kopējais progress"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Sending files..."
-msgstr "Nosūtu failus..."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Patiesi minimāla instalācija (īpaši bez urpmi)"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "files sending by FTP"
-msgstr "failu sūtīšana pa FTP"
+msgid ""
+"  Transfer  \n"
+"Now"
+msgstr ""
+"  Pārvietot  \n"
+"Tagad"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup other files"
-msgstr "Atjaunot citus failus"
+msgid "Use daemon"
+msgstr "Lietot dēmonu"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Backup user files"
-msgstr "Atjaunot lietotāja failus"
+msgid "Authentication"
+msgstr "Autentifikācija"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup system files"
-msgstr "Atjaunot sistēmas failus"
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Pievienot šo printeri Star Office/OpenOffice.org/GIMP"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Under Devel ... please wait."
-msgstr "Izstrādes stadijā ... lūdzu uzgaidiet."
+msgid "Additional CUPS servers: "
+msgstr "Uz CUPS servera \"%s\""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
 msgstr ""
-"Konfigurācijas fails netika atrasts, \n"
-"lūdzu klikšķiniet uz Meistars vai Advanced"
+"Izvēlieties vienu no automātiski noteiktajiem printeriem sarakstā, un "
+"ievadiet hosta vārdu vai IP, un neobligāti porta numuru (noklusētais ir "
+"9100) ievades laukos."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please select data to backup..."
-msgstr "Lūdzu, izvēlieties datus, kurus dublēt..."
+msgid "Where do you want to mount %s?"
+msgstr "Kur jūs vēlaties montēt %s?"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please select media for backup..."
-msgstr "Lūdzu, izvēlieties dublēšanas mēdiju"
+msgid "Restore Via Network"
+msgstr "Atjaunot pa tīklu"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please select data to restore..."
-msgstr "Lūdzu, izvēlieties datus, kurus atjaunot..."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Tiks instalētas sekojošas pakotnes"
+msgid "Algeria"
+msgstr "Alžīrija"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Kļūda pārsūtot failu pa FTP.\n"
-" Lūdzu, izlabojiet Jūsu FTP konfigurāciju."
+msgid "Initrd-size"
+msgstr "Initrd-izmērs"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
-"Kļūda pasta sūtīšanas laikā.\n"
-" Jūsu ziņojuma vēstule netika nosūtīta.\n"
-" Lūdzu, nokonfigurējiet sendmail"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Next"
-msgstr "Tālāk"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tDublēšanai izmantot tar un gzip\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Previous"
-msgstr "Iepriekšējais"
+msgid "2 MB"
+msgstr "2 MB"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Save"
-msgstr "Saglabāt"
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Build Backup"
-msgstr "Būvēt rezerves kopiju"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Setting Default Printer..."
+msgstr "Noklusētais printeris"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Restore Progress"
-msgstr "Atjaunošanas progress"
+msgid "Interface %s (using module %s)"
+msgstr "Saskarne %s (lietojot moduli %s)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Restore From Catalog"
-msgstr "Atjaunot no kataloga"
+msgid "Name: %s\n"
+msgstr "Nosaukums: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Browse to new restore repository."
-msgstr "Pārlūkot citu atjaunošanas repozitoriju."
+msgid "Generating preview ..."
+msgstr "Ģenerēju paraugu..."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "CD in place - continue."
-msgstr "CD savā vietā - turpinu."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Custom Restore"
-msgstr "Pielāgota atjaunošna"
+msgid "serial"
+msgstr "seriāla"
 
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Restore all backups"
-msgstr "Atjaunot visas rezerves kopijas"
+msgid "DVD-ROM"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restore Failed..."
-msgstr "Atjaunošana neizdevās..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Gruzijas (\"latīņu\" izvietojums)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Files Restored..."
-msgstr "Atjaunotie faili..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Path or Module required"
-msgstr "Nepieciešams ceļš vai modulis"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Tagad jūs varat norādīt moduļa %s opcijas.\n"
+"Atcerieties, ka visas adreses jāievada ar 0x prefiksu, piemēram, '0x123'"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
-msgid "Hostname required"
-msgstr "Nepieciešams resursa vārds"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Username required"
-msgstr "Nepieciešams lietotāja vārds"
+msgid "Kenya"
+msgstr "Kenija"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Password required"
-msgstr "Nepieciešama parole"
+msgid "Use ``Unmount'' first"
+msgstr "Vispirms izmantojiet ``Nomontēt''"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Host Path or Module"
-msgstr "Hosta ceļš vai modulis"
+msgid "Installing mtools packages..."
+msgstr "Instalēju pakotnes..."
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Host Name"
-msgstr "Hosta vārds:"
+msgid "You must specify a root partition"
+msgstr "Jums ir nepieciešama root sadaļa"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Atjaunot, izmantojot tīkla protokolu: %s"
+msgid "first step creation"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restore Via Network"
-msgstr "Atjaunot pa tīklu"
+msgid "Both Shift keys simultaneously"
+msgstr "Abi Shift taustiņi vienlaicīgi"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Select a scanner model"
+msgstr "Izvēlieties skeneri"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restore From Tape"
-msgstr "Atjaunot no lentas"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup konfigurēšana"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Saglabāt kā..."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore From CD"
-msgstr "Atjanot no CD"
+msgid "Korea (North)"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Backup files not found at %s."
-msgstr "Rezerves kopijas faili nav atrasti uz %s."
+msgid "Autologin"
+msgstr "Autopieslēgšanās"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Izmainīt\n"
-"atjaunošanas ceļu"
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System configuration"
+msgstr "trauksmes konfigurācija"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
+msgid "Domain Admin Password"
+msgstr "Domēna administratora parole"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
 msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
 msgstr ""
-"Atjaunot izvēlētos\n"
-"failus"
+"Mandrake Linux 9.1 nodrošina Jūs ar 11 lietotāja saskarnēm, kas var tikt "
+"pilnībā izmainītas: KDE 3, Gnome 2, WindowMaker, ..."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "Konfigurēju printeri \"%s\"..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
-"Atjaunot izvēlēto\n"
-"kataloga ierakstu"
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Remove user directories before restore."
-msgstr "Aizvākt lietotāju direktorijus pirms atjaunošanas."
+msgid "MB"
+msgstr "MB"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
 msgstr ""
-"Veiciet jaunu dublēšanu pirms atjaunošanas (tikai papildinošām rezerves "
-"kopijām.)"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "select path to restore (instead of /)"
-msgstr "izvēlieties ceļu, uz kuru atjaunot (ja ne uz /)"
+msgid "Virgin Islands (British)"
+msgstr "Virdžīnu salas (Britu)"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore Other"
-msgstr "Atjaunot citu"
+msgid "Bermuda"
+msgstr "Bermundu salas"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Restore Users"
-msgstr "Atjaunot lietotājus"
+msgid "click here if you are sure."
+msgstr "klikšķiniet šeit, ja esat pārlecināts."
 
 #: ../../standalone/drakbackup:1
-#, c-format
-msgid "Restore system"
-msgstr "Atjaunot sistēmu"
+#, fuzzy, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Konfigurācijas fails netika atrasts, \n"
+"lūdzu klikšķiniet uz Meistars vai Advanced"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Other Media"
-msgstr "Cits mēdijs"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Augstāk ir uzskaitītas eksistējošās Linux sadaļas, kas ir atrastas uz jūsu\n"
+"cietā diska. Jūs varat atstāt meistara izdarīto izvēli, jo tā ir laba\n"
+"parastām vajadzībām. Ja jūs izmaināt šo izvēli, jums ir jādefinē vismaz\n"
+"saknes sadaļā(\"/\"). Neizvēlieties pārāk mazu sadaļu, citādi jūs nevarēsit\n"
+"instalēt visas vajadzīgās programmas. Ja vēlaties datus glabāt atsevišķā\n"
+"sadaļā, jums ir jānorāda arī \"/home\" (to var izdarīt tikai tad, ja jums "
+"ir\n"
+"vairākas Linux sadaļas).\n"
+"\n"
+"Jūsu zināšanai, katra sadaļa ir uzskaitīta šādā veidā: \"Nosaukums\", "
+"\"Izmērs\".\n"
+"\n"
+"\"Nosaukums\" ir kodēts šādi: \"cietā diska tips\", \"cietā diska numurs\",\n"
+"\"sadaļas numurs\" (piemēram, \"hda1\").\n"
+"\n"
+"\"Cietā diska tips\" ir \"hd\", ja jūsu cietais disks ir IDE disks, \"sd\",\n"
+"ja tas ir SCSI cietais disks.\n"
+"\n"
+"\"Cietā diska numurs\" vienmēr ir burts pēc \"hd\" vai \"sd\". IDE diskiem:\n"
+"\n"
+"   * \"a\" nozīmē \"primārā IDE kontroliera galvenais disks\",\n"
+"\n"
+"   * \"b\" nozīmē \"primārā IDE konytroliera pakārtotais disks\",\n"
+"\n"
+"   * \"c\" nozīmē \"sekundārā IDE kontroliera galvenais disks\",\n"
+"\n"
+"   * \"d\" nozīmē \"sekundārā IDE kontroliera pakārtotais disks\".\n"
+"\n"
+"SCSI diskiem \"a\" nozīmē \"primārais cietais disks\", \"b\" nozīmē\n"
+" \"sekundārais cietais disks\", utt..."
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Izvēlieties citu mēdiju, no kura atjaunot"
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, fuzzy, c-format
+msgid "Remove"
+msgstr "Izdzēst ierakstu"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Lūdzu ievadiet direktoriju, kurā tiek glabātas rezerves kopijas"
+msgid "Lesotho"
+msgstr "Lesoto"
 
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
 #, c-format
-msgid "Restore from Hard Disk."
-msgstr "Atjanot no cietā diska:"
+msgid "utopia 25"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Use quota for backup files."
-msgstr "Lietot kvotas priekš dublēšanas failiem."
+msgid "Pipe job into a command"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
 msgstr ""
-"Lūdzu ievadiet maksimālo izmēru,\n"
-" atļauto priekš Drakbackup"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Please enter the directory to save:"
-msgstr "Lūdzu, ievadiet direktoriju, kurā saglabāt:"
+msgid "Yes"
+msgstr "Jā"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Dublēšanai lietot cieto disku"
+msgid "Cote d'Ivoire"
+msgstr "Kotdivuāra"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "please choose the date to restore"
-msgstr "lūdzu, izvēlieties datus, kurus atjaunot"
+msgid "Which protocol do you want to use?"
+msgstr "Kādu protokolu vēlaties izmantot?"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup the system files before:"
-msgstr "Vispirms dublējiet sistēmas failus:"
+msgid "Restore Progress"
+msgstr "Atjaunošanas progress"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Estonia"
+msgstr "Igaunija"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
-"Lietotāju saraksts priekš atjaunošanas (tikai pats jaunākais datums katram "
-"lietotājam ir svarīgs)"
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "OK to restore the other files."
-msgstr "OK lai atjaunotu citus failus."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Jūsu diska sadaļu tabulā ir caurums, bet es to nevaru izmantot.\n"
+"Vienīgais risinājums ir pārvietot primāras sadaļas tā, lai caurums atrastos "
+"blakus paplašinātajām sadaļām."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "         Restore Configuration       "
-msgstr "         Atjaunot konfigurāciju       "
+msgid "Channel"
+msgstr "Kanāls"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          veiksmīgi atjaunoti uz %s        "
+msgid "Add"
+msgstr "Pievienot"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "          All of your selected data have been          "
-msgstr "          Visi Jūsu izvēlētie dati tika                "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Interneta savienojuma koplietošana nekad nav konfigurēta."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup files are corrupted"
-msgstr "Rezerves kopijas faili ir bojāti"
+msgid " Error while sending mail. \n"
+msgstr " Kļūda pasta sūtīšanas laikā. \n"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr ""
+msgid "Keyboard"
+msgstr "Tastatūra"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
-"Bojāto datu saraksts:\n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
-"Atjaunojamo datu saraksts:\n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Nav konfigurācijas, lūdzu izvēlieties Meistaru vai Izvērstu.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Izvēlieties savienojumu, kuru vēlaties konfigurēt"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Tīkls ar webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Lūdzu uzgaidiet, uzstādu drošības līmeni"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Tīkls ar rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 ir maksimāla izstrādāšanas platforma"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Tīkls ar SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Konfigurēju tīkla iekārtu %s"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Tīkls ar FTP.\n"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "aktivizēt"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Lenta \n"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Lūdzu norādiet, kuru tīkla adapteri vēlaties izmantot Interneta savienojumam."
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Meklēju uzlabojamās pakotnes"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Cietais disks.\n"
+msgid "Mount point: "
+msgstr "Montēšanas punkts: "
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Dēmons (%s) iekļauj:\n"
+msgid "parse all fonts"
+msgstr "analizēt visus fontus"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tDublēšanai izmantot tar un gzip\n"
+msgid "With X"
+msgstr "Ar X"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tDublēšanai izmantot tar un bzip2\n"
+msgid "Multi-head configuration"
+msgstr "N-ekrānu konfigurācija"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNeiekļaut sistēmas failus\n"
+msgid "No browser available! Please install one"
+msgstr "Pārlūks nav pieejams. Lūdzu, instalējiet kādu"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Options:\n"
+"%s"
 msgstr ""
+"Saglabāt izmaiņas?\n"
+"Pašreizējā konfigurācija ir:\n"
 "\n"
-"- Opcijas:\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t lietotāja vārds: %s\n"
-"\t\t ceļš: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "ReiserFS nevar izmantot sadaļām, kas mazākas par 32MB"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
-"\n"
-"- Saglabāt, izmantojot %s, uz hosta %s\n"
+"Protokols rwho attāliem lietotājiem ļauj saņemt visu atvērto lietotāju\n"
+"sesiju sarakstu no datora, kurā darbojas rwho demons (līdzīgi finger)."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Domain name"
+msgstr "Domēna nosaukums"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Saglabāt uz lentas iekārtā : %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Sharing of local printers"
+msgstr "Pieejamie printeri"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid " (multi-session)"
-msgstr " (vairāku sesiju)"
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/90errata.php3"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " on device: %s"
-msgstr " uz iekārtas: %s"
+msgid "Available printers"
+msgstr "Pieejamie printeri"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Tukšs"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
 "\n"
-"- Ierakstīt CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
 "\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
 "\n"
-"- Izdzēst cietā diska tar failus pēc dublēšanas.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
 "\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
 "\n"
-"- Saglabāt uz cietā diska ceļā: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
 "\n"
-"- Other Files:\n"
-msgstr ""
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
 "\n"
-"- Citi faili:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
 "\n"
-"- User Files:\n"
-msgstr ""
 "\n"
-"- Lietotāju faili:\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "teksta platums"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Kur jūs vēlaties montēt %s ierīci?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Noklusētais nomas laiks (sekundēs)"
+
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Interfeiss %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Ar pamatdokumentāciju (ieteicams!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 poga"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
 "\n"
-"- Sistēmas faili:\n"
+"Jūsu sistēmai ir tieši pievienoti %d nezināmi printeri"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Pārbaude"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
 msgstr ""
-"\n"
-"Dublēšanas avoti: \n"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select user manually"
-msgstr "Izvēlēties lietotāju manuāli"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "Vairāk"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Backup Users"
-msgstr "Dublēt lietotājus"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Jūsu izvēle? (noklusēti `%s'%s) "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup system"
-msgstr "Dublēšanas sistēma"
+msgid "Raw printer"
+msgstr "Tiešais printeris"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Lūdzu, izvēlieties, ko vēlaties dublēt"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "ierīces pārdevēja nosaukums"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "on Tape Device"
-msgstr "uz lentas ierīces"
+msgid "Vendor"
+msgstr "Pārdevējs"
 
-#: ../../standalone/drakbackup:1
+#
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "on CDROM"
-msgstr "uz CDROM"
+msgid "Interface %s"
+msgstr "Interfeiss %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "across Network"
-msgstr "pa tīklu"
+msgid "Configure mouse"
+msgstr "Peles konfigurēšana"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "on Hard Drive"
-msgstr "uz cietā diska"
+msgid "Choose the mount points"
+msgstr "Izvēlieties montēšanas punktus"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Please choose where you want to backup"
-msgstr "Lūdzu, izvēlieties, kur vēlaties dublēt"
+msgid "OK"
+msgstr "Labi"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "More Options"
-msgstr "Vairāk opciju"
+msgid "Yugoslavian (latin)"
+msgstr "Dienvidslāvu (latīņu)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "When"
-msgstr "Kad"
+msgid "Installing"
+msgstr "Instalēju"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Where"
-msgstr "Kur"
+msgid "Launch userdrake"
+msgstr "Izpildīt userdrake"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "What"
-msgstr "Ko"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Is this an install or an upgrade?"
+msgstr "Šī ir instalēšana vai atjaunināšana?"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Iekšēja ISDN karte"
+
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
 msgstr ""
+"Lai dalītos ar pieredzi un palīdzētu veidot Linux rīkus, pievienojieties "
+"diskusiju forumiem, kurus varat atrast \"Kopienas\" web lapās."
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
+msgstr ""
+"Apsveicu, tīkla un Internet konfigurēšana ir pabeigta.\n"
+"Konfigurācija tagad tiks lietota uz Jūsu datora.\n"
+"\n"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Pēc katras rezerves kopēšanas sūtīt vēstuli uz:"
+msgid "\t-Hard drive.\n"
+msgstr "\t-Cietais disks.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
 "\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Lūdzu, izvēlieties\n"
-"mēdiju dublēšanai."
+msgid "Printer on remote CUPS server"
+msgstr "Printeris uz attāla CUPS servera"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Lūdzu, izvēlieties laika\n"
-"intervālu starp katrām dublēšanas\n"
-"reizēm"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Neizdevās printeri \"%s\" noņemt no Office/OpenOffice.org/GIMP."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Use daemon"
-msgstr "Lietot dēmonu"
+msgid "delete"
+msgstr "dzēst"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "monthly"
-msgstr "ik mēnesi"
+msgid "here if no."
+msgstr "šeit, ja nē."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Resursa vārds"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "weekly"
-msgstr "ik nedēļu"
+msgid "The maximum lease (in seconds)"
+msgstr "Maksimālais nomas laiks (sekundēs)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "daily"
-msgstr "ik dienu"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Lūdzu izvēlieties, ar kuru seriālo portu ir saslēgta pele."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "hourly"
-msgstr "ik stundu"
+msgid "Did it work properly?"
+msgstr "Vai izdrukāja pareizi?"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "HardDrive / NFS"
-msgstr "Cietais disks / NFS"
+msgid "Poor"
+msgstr "Vājš"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "The DHCP start range"
+msgstr "DHCP sākuma diapazons"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Lūdzu, iezvēlieties direktoriju, kurā saglabāt:"
+msgid "Grenada"
+msgstr "Grenāda"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Lūdzu atzīmējiet, vai vēlaties izbīdīt lentu pēc dublēšanas."
+msgid "Unsafe"
+msgstr "Nedrošs"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Lūdzu atzīmējiet, vai vēlaties dzēst lentu pirms dublēšanas."
+msgid ", %s sectors"
+msgstr ", %s sektori"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Atzīmējiet, vai vēlaties izmantot neattinošu ierīci."
+msgid "No"
+msgstr "Nē"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Lūdzu ievadiet rezerves kopēšanas ierīces nosaukumu"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use tape to backup"
-msgstr "Dublēšanai lietot lentu"
+msgid "Guadeloupe"
+msgstr "Gvadelupa"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "No CD device defined!"
-msgstr "Nav nodefinēta CD iekārta!"
+msgid "could not find any font.\n"
+msgstr "netika atrasts neviens fonts.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Lūdzu ievadiet CD rakstītāja ierīces nosaukumu\n"
-"piemēram: 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Vai vēlaties, lai BackSpace konsolē darbotos kā Delete?"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Lūdzu atzīmējiet, ja lietojat DVDRAM ierīci"
+msgid "Vertical refresh rate"
+msgstr "Vertikālā frekvence"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
 #, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Lūdzu atzīmējiet, ja lietojat DVDR ierīci"
+msgid "Entering step `%s'\n"
+msgstr "Uzsāku soli `%s'\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid " Erase Now "
-msgstr " Dzēst tagad"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing %s ..."
+msgstr "Atvienoju %s"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Lūdzu atzīmējiet, ja vēlaties izdzēst RW mēdiju (1. sesiju)"
+msgid "Niger"
+msgstr "Nigērija"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Lūdzu atzīmējiet, ja lietojat CDRW mēdiju"
+msgid "No printer"
+msgstr "Nav printera"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Please check for multisession CD"
-msgstr "Lūdzu atzīmējiet, ja lietojat daudzu sesiju CD"
+msgid "alert configuration"
+msgstr "trauksmes konfigurācija"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Lūdzu izvēlieties Jūsu cd/DVD mēdija izmēru (Mb)"
+msgid "NetWare Printer Options"
+msgstr "NetWare printera opcijas"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "%s BootSplash (%s) preview"
 msgstr ""
-"Lūdzu, izvēlieties Jūsu CD/DVD ierīci\n"
-"(Nospiediet Enter, lai kopētu uzstādījumus uz citiem lauciņiem.\n"
-"Šis lauciņš nav nepieciešams, tikai rīks, lai aizpildītu formu.)"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Lietot CD/DVDROM dublēšanai"
+msgid "General"
+msgstr "Vispārēji"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Need hostname, username and password!"
-msgstr "Nepieciešams hosts, lietotāja vārds un parole!"
+msgid "Printing system: "
+msgstr "Drukas sistēma:"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Remember this password"
-msgstr "Atcerieties šo paroli"
+msgid "Add a user"
+msgstr "Lietotāju pievienošana"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please enter your password"
-msgstr "Lūdzu, ievadie Jūsu paroli"
+msgid "Network configuration (%d adapters)"
+msgstr "Tīkla konfigurācija (%d adapteri)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Please enter your login"
-msgstr "Lūdzu, ievadiet Jūsu lietotāja vārdu"
+msgid "Mandatory package %s is missing"
+msgstr "Iztrūkst obligātā pakotne %s."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filipīnas"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Labi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Printera rindas nosaukums"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Vai vēlaties izmantot aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Baltkrievijas"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
-"Lūdzu, norādiet direktoriju (vai moduli) uz\n"
-"šī hosta, kur novietot rezerves kopiju."
+"PDQ atbalsta tikai lokālos printerus, attālinātus LPD printerus, un kontakta/"
+"TCP printerus.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please enter the host name or IP."
-msgstr "Lūdzu, ievadiet osta vārdu vai IP."
+msgid "Move files to the new partition"
+msgstr "Pārvietot failus uz jauno sadaļu"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
-"Citas (ne drakbackup)\n"
-"atslēgas jau atrodas norādītajā vietā"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"  Transfer  \n"
-"Now"
-msgstr ""
-"  Pārvietot  \n"
-"Tagad"
+msgid "Restore From Catalog"
+msgstr "Atjaunot no kataloga"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
-"Izveidot/pārlikt\n"
-"dublēšanas atslēgas priekš SSH"
+msgid "Pitcairn"
+msgstr "Pitkerna"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use Expect for SSH"
-msgstr "Priekš SSH lietot Expect"
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Net Method:"
-msgstr "Tīkla metode:"
+msgid "group :"
+msgstr "grupa :"
 
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Use network connection to backup"
-msgstr "Dublēšanai lietot tīkla savienojumu"
+msgid "mounting partition %s in directory %s failed"
+msgstr "sadaļas %s montēšana direktorijā %s neizdevās"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Users"
-msgstr "Lietotāji"
+msgid "Lilo screen"
+msgstr "Lilo ekrāns"
 
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "LILO with graphical menu"
+msgstr "LILO ar grafisko izvēlni"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Lietot Pieaugošas Dublēšanas (neaizvietot iepriekšējās dublēšanas)"
+msgid "Estimating"
+msgstr "Aprēķinu"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Remove Selected"
-msgstr " Noņemt atzīmētos"
+msgid "You can't unselect this package. It is already installed"
+msgstr "Jūs nevarat atteikties no šīs pakotnes. Tā jau ir instalēta"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr "Neiekļaut pārlūka kešu"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ". printeris \"%s\" uz SMB/Windows servera \"%s\""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Lūdzu atzīmējiet visus lietotājus, kurus vēlaties iekļaut dublēšanā."
+msgid "Go on anyway?"
+msgstr "Tomēr turpināt?"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Ar šo opciju Jums būs iespēja atjaunot jebkuru /etc\n"
-"direktorijas versiju."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Meklēju pieejamās pakotnes un pārbūvēju rpm datubāzi..."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Neiekļaut kritiskos failus (passwd, group, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "Neizskatās pēc ierakstāma datu nesēja!"
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Lietot pieaugošu dublēšanu (neaizvietot iepriekšējās dublēšanas)"
+msgid "Specify options"
+msgstr "Norādīt opcijas"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Dublēt sistēmas failus. (/etc direktoriju)"
+msgid "Vanuatu"
+msgstr "Vanuatu"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Šīs opcijas var dublēt un atjaunot visus failus /etc direktorijā.\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Jābūt dotam vai nu servera vārdam, vai servera IP!"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
+"Pielāgotā sāknēšanas diskete piedāvā veidu, kā sāknēt jūsu Linux sistēmu\n"
+"neatkarīgi no parastā sāknētāja. Tas ir noderīgi, ja jūs nevēlaties savā\n"
+"sistēmā uzstādīt SILO, vai kāda cita operētājsistēma izdzēš SILO,\n"
+"vai arī SILO nedarbojas ar jūsu dzelžu konfigurāciju. Pielāgoto\n"
+"sāknēšanas disketi var izmantot arī kopā ar Mandrake glābšanas attēlu,\n"
+"atvieglojot atjaunošanu pēc smagiem sistēmas bojājumiem.\n"
 "\n"
-"Lūdzu, atzīmējiet visas nepieciešamās opcijas.\n"
+"Ja vēlaties izveidot jūsu sistēmai pielāgotu sāknēšanas disketi,\n"
+"ielieciet sisketi pirmajā iekārtā un nospiediet \"Labi\"."
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Atzīmējiet failus vai direktorijus un klikšķiniet uz 'Pievienot'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Jūs nevarat lietot šifrēto failsistēmu montēšanas punktā %s"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "File Selection"
-msgstr "Failu izvēle"
+msgid "Norfolk Island"
+msgstr "Norfolkas sala"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Can't create catalog!"
-msgstr "Nevar izveidot katalogu!"
+msgid "Theme installation failed!"
+msgstr "Tēmas instalēšana neizdevās!"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid " Error while sending mail. \n"
-msgstr " Kļūda pasta sūtīšanas laikā. \n"
+msgid "Nothing to do"
+msgstr "Nav ko darīt"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivitātes caur tape:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Izmantot priekš loopback"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivitātes caur CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake kļūdu ziņojuma rīks"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr "izmantot pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Pārvietoju failus uz jauno sadaļu"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s ar EKSPERIMENTĀLU aparatūras 3D akselerāciju"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Izvērsta"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Pārcelšana"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvoraka (Zviedru)"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivitātes caur %s:\n"
-"\n"
+msgid "More Options"
+msgstr "Vairāk opciju"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afganistāna"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Delete Hard Drive tar files after backup to other media."
 msgstr ""
-"\n"
-"FTP savienojuma problēma: nebija iespējams nosūtīt Jūsu dublēšanas failus pa "
-"FTP.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
-"Pa FTP aizsūtīto failu saraksts: %s\n"
-" "
+"cron ir parasta UNIX programma, kas palaiž lietotāju norādītās programmas\n"
+"periodiski ieplānotos laikos. vixie cron piedāvā virkni papildus\n"
+"iespēju salīdzinot ar UNIX cron, tajā skaitā arī labāku drošību un daudz\n"
+"izvērtstākas konfigurēšanas iespējas."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No changes to backup!"
-msgstr "Nav izmaiņu, ko dublēt!"
+msgid "Burundi"
+msgstr "Burundi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Cietņe dublējuma faili..."
+msgid "Add Client -->"
+msgstr "Pievienot klientu -->"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Backup Other files..."
-msgstr "Dublēt citus failus..."
+msgid "Read carefully!"
+msgstr "Lasiet uzmanīgi!"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Cietā diska rezerver kopēšanas progress..."
+msgid "RW"
+msgstr "RW"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Backup User files..."
-msgstr "Dublēt lietotāja failus..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Lūdzu,\n"
+"ieraksties Jūsu TV standrtu un valsti"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Backup system files..."
-msgstr "Dublēt sistēmas failus..."
+msgid "Port"
+msgstr "Ports"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "No tape in %s!"
-msgstr "Lenta nav ievietota %s!"
+msgid "No (experts only)"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Permission problem accessing CD."
-msgstr "Atļaujas problēma, piekļūstot CD."
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "No kernel selected!"
+msgstr "Kodols nav izvēlēts!"
 
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Var paiet kāds brīdis, kamēr tiek izdzēsts datu nesējs."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Nospiediet ievadu, lai saakneetu izveeleeto OS, 'e', lai redigeetu"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Not erasable media!"
-msgstr "Nav dzēšams datu nesējs!"
+msgid "Set-GID"
+msgstr "Set-GID"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Neizskatās pēc ierakstāma datu nesēja!"
+msgid "The encryption keys do not match"
+msgstr "Šifrēšanas atslēgas nesakrīt"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "CDR/DVDR nav ievietots iekārtā!"
+msgid "Right \"Windows\" key"
+msgstr "Labais \"Windows\" taustiņš"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "WebDAV transfer failed!"
-msgstr "WebDAV pārvietošana neizdevās!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr ""
+
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "WebDAV attālinātā vieta jau sinhronizēta!"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Pirms turpināt, Jums vajadzētu uzmanīgi izlasīt licences vienošanos. Tā "
+"nosedz\n"
+"visu Mandrake Linux distribūciju, un ja Jūs nepiekrītat visiem noteikumiem,\n"
+"nospiediet uz pogas \"Noraidīt\", kas nekavējoties pārtrauks instalāciju. "
+"Lai turpinātu\n"
+"instalācijas procesu, nospiediet pogu \"Pieņemt\"."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Total progess"
-msgstr "Kopējais progress"
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
+msgstr ""
+"Šis ir patreizējam printerim pieejamo opciju saraksts:\n"
+"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
+msgid "Resolutions"
+msgstr "Izšķirtspējas"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
 msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"drakfirewall configurator\n"
 "\n"
-"without being prompted for a password."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
 msgstr ""
-"Pārvietošana veiksmīga\n"
-"Varbūt Jūs vēlaties pārbaudīt, vai varat pieslēgties serverim ar:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"drakfirewall konfigurētājs\n"
 "\n"
-"bez paroles pieprasījuma."
+"Šis rīks konfigurē personālo ugunssienu priekš Mandrake Linux\n"
+"datora. Priekš spēcīga, ugunssienas izveidei veltīta risinājuma,\n"
+"lūdzu apskatiet MandrakeSecurity Firewall XXXXXX."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "%s not responding"
-msgstr "%s neatsaucas"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Lūdzu, ievadiet Jūsu lietotāja vārdu, paroli un domēna nosaukumu, lai "
+"piekļūtu šim hostam."
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Can't find %s on %s"
-msgstr "Nevar atrast %s uz %s"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr " Noņemt atzīmētos"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Nav dota atļauja pārvietot %s uz %s"
+msgid "Network configuration"
+msgstr "Tīkla konfigurācija"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bad password on %s"
-msgstr "SLikta parole uz %s"
+msgid "No sharing"
+msgstr "Bez koplietošanas"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Nav paroles pieprasījuma uz %s pie porta %s"
+msgid "Move selected rule down one level"
+msgstr "Nolaist izvēlēto noteikumu par vienu līmeni"
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "KĻŪDA: nevar pavairot %s."
+msgid "TB"
+msgstr "TB"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Var paiet kāds brīdis, kamēr ģenerējas atslēgas."
+msgid "Please check if you are using a DVDR device"
+msgstr "Lūdzu atzīmējiet, ja lietojat DVDR ierīci"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
+msgid "FATAL"
+msgstr "FATĀLS"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
 "\n"
-"                    DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
 "\n"
 msgstr ""
-"\n"
-"                    DrakBackup ziņojuma detaļas\n"
-"\n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Izdzēst"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
 msgstr ""
-"\n"
-"                      DrakBackup dēmona ziņojums\n"
-"\n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
 #, c-format
 msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
 msgstr ""
-"\n"
-"                      DrakBackup ziņojums \n"
-"\n"
+"Datoru var konfigurēt, lai pēc sistēmas ielādes automātiski startētu X.\n"
+"Vai vēlaties, lai pēc pārstartēšanas tiktu palaists X?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "INFO"
-msgstr "INFORMĀCIJA"
+msgid "Build the disk"
+msgstr "Izveidot disku"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Atvienot"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "FATAL"
-msgstr "FATĀLS"
+msgid "Status:"
+msgstr "Stāvoklis:"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "WARNING"
-msgstr "BRĪDINĀJUMS"
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron vēl nav pieejams citiem lietotājiem, kā root"
+msgid "SSH Server"
+msgstr "SSH serveris"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s uzstādīšana neizdevās. Uzradās šāda kļūda:"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Tīkls ar rsync.\n"
 
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Eiropas protokols"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No, I don't want autologin"
-msgstr "Nē, negribu automātiski pieslēgties"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", printeris \"%s\" pie servera \"%s\""
 
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Jā, gribu automātiski pieslēgties ar šo (lietotājs, darba virsma)"
+msgid "Error"
+msgstr "Kļūda"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Palaist X-Window sistēmu sāknēšanas laikā"
+msgid "allow \"su\""
+msgstr "atļaut \"su\""
 
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "System mode"
-msgstr "Sistēmas režīms"
+msgid "Australia"
+msgstr "Austrālija"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Bootsplash"
-msgstr ""
+msgid "please wait during ttmkfdir..."
+msgstr "uzgaidiet ttmkfdir laikā..."
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Lilo screen"
-msgstr "Lilo ekrāns"
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfigurāt tikai karti \"%s\"%s"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Level"
+msgstr "līmenis"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
+msgid "Change the printing system"
+msgstr "Drukas sistēmas nomaiņa"
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
 msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
 msgstr ""
+"Jūsu sistēma atbalsta n-ekrānu konfigurāciju.\n"
+"Ko nu darīsim?"
 
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Themes"
-msgstr "Tēmas"
+msgid "Configure services"
+msgstr "Servisu konfigurēšana"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Splash selection"
+msgid "Broadcast Address:"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jūs pašlaik lietojat OS ielādētāju %s.\n"
-"Spiediet Konfigurēt, lai palaistu uzstādīšanas meistaru."
+msgid "mount failed: "
+msgstr "montēšana neizdevās: "
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "LiLo un Bootsplash tēmu instalēšana ir veiksmīga"
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Theme installation failed!"
-msgstr "Tēmas instalēšana neizdevās!"
+msgid "Image"
+msgstr "Attēls"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Notice"
-msgstr "Brīdinājums"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "Neizdevās printeri \"%s\" pievienot Star Office/OpenOffice.org/GIMP."
 
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
 #, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Izpildiet atkārtoti 'lilo'"
+msgid "Remote Administration"
+msgstr "Attāla administrēšana"
 
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
 #, c-format
 msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
+"PCMCIA atbalsts 2.2 kodoliem vairs nepastāv. Lūdzu izmantojiet 2.4 kodolu."
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Nav iespējams izpildīt mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Selected All"
+msgstr "Atzīmēti visi"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr ""
-"Nav iespējams rakstīt /etc/sysconfig/bootsplash\n"
-"Fails nav atrasts."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Write %s"
-msgstr "Rakstīt %s"
+msgid "Webmin Service"
+msgstr "Webmin serviss"
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Nav iespējams rakstīt /etc/sysconfig/bootsplash."
+msgid "device"
+msgstr "ierīce"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Lilo message not found"
-msgstr "Lilo paziņojums nav atrasts"
+msgid "All"
+msgstr "Viss"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Copy %s to %s"
-msgstr "Kopēt no %s uz %s"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Kuru drukāšanas sistēmu (spolētāju) vēlaties izmantot?"
 
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Backup %s to %s.old"
-msgstr "Dublēt %s uz %s.old"
+msgid "Greece"
+msgstr "Grieķija"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Create new theme"
-msgstr "Izveidot jaunu tēmu"
+msgid "An error occurred"
+msgstr "Atklāta kļūda"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
 msgid ""
-"Display theme\n"
-"under console"
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
 msgstr ""
-"Attēlot tēmu\n"
-"zem konsoles"
+"Šo pakotni ir nepieciešams uzlabot\n"
+"Vai tiešām vēlaties atteikties no tās?"
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Install themes"
-msgstr "Instalēt tēmas"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "Armēnijas (rakstāmmašīna)"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub režīms"
+msgid "manual"
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot režīms"
+msgid "Printer manufacturer, model, driver"
+msgstr "Printera izgatavotājs, modelis, draiveris"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Nav datu nesēja, vai arī aizliegta rakstīšana ierīcē %s.\n"
+"Lūdzu ielieciet kādu."
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/File/_Quit"
-msgstr "/Fails/_Iziet"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Direktorijā %s jau ir dati\n"
+"(%s)"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "/_File"
-msgstr "/_Fails"
+msgid "Printer on NetWare server"
+msgstr "Printeris uz NetWare servera"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Boot Style Configuration"
-msgstr "Sāknēšanas stila konfigurēšana"
+msgid "Give the ram size in MB"
+msgstr "Norādiet atmiņas apjomu Mb"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "No browser available! Please install one"
-msgstr "Pārlūks nav pieejams. Lūdzu, instalējiet kādu"
+msgid "Real name"
+msgstr "Vārds un uzvārds"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "pievienojos Bugzilla meistaram ..."
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Nav instalēts"
+msgid "done"
+msgstr "izdarīts"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not installed"
-msgstr "Nav instalēts"
+msgid "Please uncheck or remove it on next time."
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Standalone Tools"
-msgstr "Nesaistīti rīki"
+msgid "Higher"
+msgstr "Augstāk"
 
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Report"
-msgstr "Ziņojums"
+msgid "Choose the partitions you want to format"
+msgstr "Izvēlieties sadaļas, ko vēlaties formatēt"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
 "\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
+"Jūsu datora TV karte netika noteikta. Lūdzu pārliecinieties, ka Linux "
+"atbalstīta Video/TV karte ir pareizi iesprausta.\n"
 "\n"
 "\n"
-"Lai nosūtītu kļūdu ziņojumu, noklikšķiniet uz pogas Ziņot.\n"
-"Tas atvērs web pārlūka logu uz https://drakbug.mandrakesoft.com\n"
-" kur Jūs atradīsiet aizpildāmo formu. Augstāk attēlotā infromācija tiks\n"
-"pārvietota uz šo serveri\n"
+"Jūs varat aplūkot mūsu aparatūras datubāzi šeit:\n"
 "\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Release: "
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Kernel:"
-msgstr "Kodols:"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Package: "
-msgstr "Pakotne:"
+msgid "Can't find %s on %s"
+msgstr "Nevar atrast %s uz %s"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Application:"
-msgstr "Aplikācija:"
+msgid "Japanese 106 keys"
+msgstr "Japānas 106 taistiņi"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Configuration Wizards"
-msgstr "Konfigurēšanas meistari"
+msgid "This will take a few minutes."
+msgstr "Tas aizņems dažas minūtes."
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Windows Migration tool"
-msgstr "Windows migrēšanas rīks"
+msgid "Use scanners on remote computers"
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Delete selected rule"
+msgstr "Dzēst izvēleto noteikumu"
 
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Software Manager"
-msgstr "Programmatūras pārvaldnieks"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Printeris uz attāla CUPS servera"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remote Control"
-msgstr "Attālināta kontrole"
+msgid "Insert a floppy in %s"
+msgstr "Ielieciet disketi iekārtā %s"
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "Maldives"
+msgstr "Maldivu salas"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "compact"
+msgstr "kompakts"
 
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
 #, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "1 minute"
+msgstr "1 minūte"
 
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "uz šinas %d id %d\n"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Synchronization tool"
-msgstr "Sinhronizēšanas rīks"
+msgid ", multi-function device"
+msgstr ", daudzfunkcionāla ierīce"
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "First Time Wizard"
-msgstr "Pirmās reizes meistars"
+msgid "Laos"
+msgstr ""
 
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake kontroles centrs"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Nav FAT sadaļu, lai izmainīto to izmēru vai izmantotu kā loopback (vai "
+"nepietiek brīvas vietas)"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake kļūdu ziņojuma rīks"
+msgid "Up"
+msgstr "Uz augšu"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parametri"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Ugunsmūris/Maršrutizators"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "Interneta savienojuma konfigurācija"
+msgid "Area:"
+msgstr "Apgabals:"
 
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "DHCP Client"
-msgstr "DHCP klients"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet karte"
+msgid "Printer Server"
+msgstr "Printera serveris"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Gateway"
-msgstr "Vārteja"
+msgid "Disconnection from the Internet complete."
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Savienojuma tips: "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "trauksmes konfigurācija"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Profile: "
-msgstr "Profils: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet connection configuration"
-msgstr "Interneta savienojuma konfigurācija"
+msgid "Saint Pierre and Miquelon"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
 msgstr ""
+"\n"
+"Rezerves kopiju atjaunošanas problēmas:\n"
+"\n"
+"Atjaunošanas soļa laikā, Drakbackup pārbaudīs visus\n"
+"rezerves kopijas failus pirms atjaunošanas.\n"
+"Pirms atjaunošanas Drakbackup noņems oriģinālo\n"
+"direktoriju, un Jūs zaudēsiet visus datus. Ir svarīgi būt\n"
+"uzmanīgam un nemodificēt rezerves kopijasdatus manuāli.\n"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "activate now"
-msgstr "aktivizēt"
+msgid "Portugal"
+msgstr "Portugāle"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "deactivate now"
-msgstr "deaktivizēt"
+msgid "Do you have another one?"
+msgstr "Vai ir vēl kāds?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "DHCP client"
-msgstr "DHCP klients"
+msgid ", printing to %s"
+msgstr ", drukāju uz %s"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Started on boot"
-msgstr "Palaists pie ielādes"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Lūdzu, ievadiet osta vārdu vai IP."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Boot Protocol"
-msgstr "Sāknēšanas protokols"
+msgid "Toggle to normal mode"
+msgstr "Pārslēgt normālajā režīmā"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapteris %s: %s"
+msgid "Generic"
+msgstr "Vispārēja"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN Configuration"
-msgstr "LAN konfigurācija"
+msgid "Cylinder %d to %d\n"
+msgstr "No cilindra %d līdz cilindram %d\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "LAN configuration"
-msgstr "LAN konfigurācija"
+msgid "New profile..."
+msgstr "Jauns profils..."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
+msgid "Which disk do you want to move it to?"
+msgstr "Uz kuru disku vēlaties to pārvietot?"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Connect..."
-msgstr "Savienoju..."
+msgid "Display logo on Console"
+msgstr "Attēlot logo konsolē."
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Disconnect..."
-msgstr "Atvienoju..."
+msgid "Windows Domain"
+msgstr "Windows domēns"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Saskarne %s (lietojot moduli %s)"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not connected"
-msgstr "Nav savienots"
+msgid "INFO"
+msgstr "INFORMĀCIJA"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "Volisa un Futunas salas"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Connected"
-msgstr "Savienots"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Vispirms jāizveido /etc/dhcpd.conf!"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Is FPU present"
 msgstr ""
 
-#
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Interface:"
-msgstr "Interfeiss:"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Netika atrasti printeri, kas tieši pieslēgti Jūsu datoram"
 
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "Gateway:"
-msgstr "Vārteja:"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Nav papildus informācijas\n"
+"par šo servisu."
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Apply"
+msgid "Build Single NIC -->"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Klikšķiniet šeit, lai sāktu vedni ->"
+msgid "Is this correct?"
+msgstr "Vai tas ir pareizi?"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Wizard..."
-msgstr "Meistars..."
+msgid "Marshall Islands"
+msgstr "Māršala salas"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Status:"
-msgstr "Stāvoklis:"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Type:"
-msgstr "Tips:"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "Bez paroles"
 
-#
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Internet access"
-msgstr "Interneta pieeja"
+msgid "Build All Kernels -->"
+msgstr "Būvēt visus kodolus -->"
 
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Hostname: "
-msgstr "Resursa vārds: "
+msgid "if set to yes, report unowned files."
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure Local Area Network..."
-msgstr "Konfigurēt lokālo datortīklu..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Jums nav swap sadaļas\n"
+"\n"
+"Vai tomēr turpināt?"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "State"
-msgstr "Stāvoklis"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Trūkst NCP servera vārds!"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Driver"
-msgstr "Draiveris"
+msgid "Suriname"
+msgstr "Surinama"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protokols"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Atļaut CD ielādi?"
 
-#
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Interface"
-msgstr "Interfeiss"
+msgid "Graphical Environment"
+msgstr "Grafiskā vide"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfigurēt Interneta pieeju..."
+msgid "Gibraltar"
+msgstr "Gibraltārs"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Wait please"
-msgstr "Lūdzu uzgaidiet"
+msgid "on Tape Device"
+msgstr "uz lentas ierīces"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Profila vārds, ko izveidot (jaunais profils tiks izveidots, kā kopija no "
-"patreizējā):"
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "bet nesakrīt"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "<-- Dzēst klientu"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "New profile..."
-msgstr "Jauns profils..."
+msgid "Filesystem type: "
+msgstr "Failsistēmas tips: "
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Profile to delete:"
-msgstr "Dzēšamais profils:"
+msgid "Starting network..."
+msgstr "tiek sākts tīkls..."
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Vjetnama"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Apraksts"
+
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "Del profile..."
-msgstr "Dzēst profilu..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimizēt drošību"
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Tīkla konfigurācija (%d adapteri)"
+msgid "Help"
+msgstr "Palīdzība"
 
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Jūsu privātais telefona numurs"
 
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Which size do you want to keep for Windows on"
+msgstr "Kādu apjomu vēlaties atstāt priekš windows uz"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
 msgstr ""
-"Nevar pareizi aizvērt mkbootdisk: \n"
-" %s \n"
-" %s"
+"Izmēģinājuma lapa(s) ir nosūtīta(s) printerim.\n"
+"Var paiet zināms laiks, pirms printeris sāk drukāt.\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Unable to fork: %s"
-msgstr "Nevar atdalīt: %s"
+msgid "Username required"
+msgstr "Nepieciešams lietotāja vārds"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
 msgstr ""
-"Nav datu nesēja, vai arī aizliegta rakstīšana ierīcē %s.\n"
-"Lūdzu ielieciet kādu."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Pārliecinieties ka datu nesējs %s ir vajadzīgajā vietā"
+"Parasti DrakX izvēlas tastatūras izkārtojumu priekš Jums (atkarībā no\n"
+"valodas, kuru Jūs izvēlējāties), tomēr Jums var nebūt tastatūra, kas "
+"atbilst\n"
+"tieši Jūsu valodai.\n"
+"ŠEIT DERĒTU KĀDS PIEMĒRS SAISTĪBĀ \n"
+"AR LATVIEŠIEM :)\n"
+"Klikšķiniet uz pogas \"Vairāk\" lai saņemtu pilnu sarakstu ar atbalstītiem\n"
+"tastatūras izkārtojumiem.\n"
+"\n"
+"Ja Jūs izvēlēsieties tastatūras izkārtojumu, kas balstās uz savādāku, kā\n"
+"latīņu alfabētu, nākamajā dialogā jums tiks pieprasīts izvēlēties taustiņa\n"
+"piesaisti, kas pārslēgs tastatūras izkārtojumu starp latīņu un ne-latīņu\n"
+"izkārtojumiem."
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Build the disk"
-msgstr "Izveidot disku"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) printera opcijas"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Output"
-msgstr "Izvade"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Remove a module"
-msgstr "Noņemt moduli"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd papildus argumenti"
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Add a module"
-msgstr "Pievienot moduli"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "omit scsi modules"
-msgstr "izlaist scsi moduļus"
+msgid "Protocol for the rest of the world"
+msgstr "Citur pasaulē"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "if needed"
-msgstr "ja nepieciešams"
+msgid "Print test pages"
+msgstr "Drukāt izmēģinājuma lapas"
 
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "omit raid modules"
-msgstr "izlaist raid moduļus"
+msgid "64 MB or more"
+msgstr "64 MB vai vairāk"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "force"
-msgstr "piespiest"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd papildus argumenti"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
+"Scannerdrake nespēja noteikt Jūsu %s skeneri.\n"
+"Lūdzu, izvēlieties iekārtu, kur Jūsu skeneris ir pievienots"
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Expert Area"
-msgstr "Eksperta apgabals"
+msgid "Not formatted\n"
+msgstr "Neformatēta\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "kernel version"
-msgstr "kodola versija"
+msgid "Periodic Checks"
+msgstr "Periodiskas pārbaudes"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "pēc noklusēšanas"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "dhcpd servera konfigurācija"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "General"
-msgstr "Vispārēji"
+msgid "Backup the system files before:"
+msgstr "Vispirms dublējiet sistēmas failus:"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "boot disk creation"
-msgstr "sāknēšanas diska veidošana"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Šis ir parasts drošības līmenis, kas ir ieteicams datoram, kas tiks\n"
+"izmantots, lai savienotos ar Internetu kā klients."
 
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
 #, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Pirmā diskešu iekārta"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Size"
-msgstr "Izmērs"
+msgid "/File/_Quit"
+msgstr "/Fails/_Iziet"
 
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Module name"
-msgstr "Moduļa nosaukums"
+msgid "Dvorak"
+msgstr "Dvoraka"
 
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Post Uninstall"
-msgstr "Pēc atinstalēšanas"
+msgid "Choose the new size"
+msgstr "Norādiet jauno izmēru"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Remove fonts on your system"
-msgstr ""
+msgid "Media class"
+msgstr "Mēdiju klase"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Initial tests"
-msgstr "Sākotnējās pārbaudes"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Šī Mandrake Linux versija neatbalsta %s."
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Post Install"
-msgstr "Pēcinstalācijas"
+msgid "Faroe Islands"
+msgstr "Farēru salas"
 
 #: ../../standalone/drakfont:1
 #, c-format
-msgid "Install & convert Fonts"
-msgstr "Instalēt un pārveidot fontus"
+msgid "Restart XFS"
+msgstr "Pārstartēt XFS"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Copy fonts on your system"
+msgid "Add host/network"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Remove List"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Selected All"
-msgstr "Atzīmēti visi"
+msgid "Please enter the directory to save to:"
+msgstr "Lūdzu, iezvēlieties direktoriju, kurā saglabāt:"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Unselected All"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "Moduļa nosaukums"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "here if no."
-msgstr "šeit, ja nē."
+msgid "Albania"
+msgstr "Albānija"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "click here if you are sure."
-msgstr "klikšķiniet šeit, ja esat pārlecināts."
+msgid "No CDR/DVDR in drive!"
+msgstr "CDR/DVDR nav ievietots iekārtā!"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Install List"
-msgstr "Instalēšanas saraksts"
+msgid "British Indian Ocean Territory"
+msgstr "Britu Indijas okeāna teritorija"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Atzīmējiet fonta failu vai direktoriju un klikšķiniet uz \"Pievienot\""
+msgid "Normal Mode"
+msgstr "Normāls režīms"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
 "\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
-"Pirms instalēt fontus, pārliecinieties vai Jums ir tiesības tos lietot un "
-"instalēt uz sistēmas.\n"
-"\n"
-"-Jūs varat instalēt fontus normālā veidā. Retos gadījumos dīvaini fonti var "
-"uzkārt X serveri."
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Generic Printers"
-msgstr "Tipveida printeri"
+msgid "Printer connection type"
+msgstr "Printera pievienojuma tips"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Jūsu sistēmā nav tīkla adaptera!"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Tīkls"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Izvēlieties aplikācijas, kas atbalstīs fontus:"
+msgid "Option %s out of range!"
+msgstr "Opcija %s ir ārpus diapazona!"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connect %s"
+msgstr "Savienot"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "About"
-msgstr "Pārtraukt"
+msgid "Restarting CUPS..."
+msgstr "Pārstartēt XFS"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Font List"
-msgstr "Fontu saraksts"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Drukāšana/skenēšana/foto kartes uz \"%s\""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Advanced Options"
+msgid "Duplicate mount point %s"
+msgstr "Dublēts montēšanas punkts %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run chkrootkit checks."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Uninstall Fonts"
-msgstr "Atinstalēt fontus"
+msgid "Connection Configuration"
+msgstr "Savienojuma konfigurēšana"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Get Windows Fonts"
-msgstr "Paņemt Windows fontus"
+msgid "Unknown|Generic"
+msgstr "Nezināma|vispārēja"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
 #, c-format
-msgid "Import Fonts"
-msgstr "Fontu importēšana"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "done"
-msgstr "izdarīts"
+msgid "Quit"
+msgstr "Beigt"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "xfs restart"
-msgstr "xfs pārstartēšana"
+msgid "Myanmar"
+msgstr "Mjanma"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Izvietot automātiski"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Restart XFS"
-msgstr "Pārstartēt XFS"
+msgid "Check bad blocks?"
+msgstr "Pārbaudīt sliktos blokus?"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Cits mēdijs"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "(pie šī datora)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "type1inst building"
-msgstr "type1inst uzbūve"
+msgid "Authentication NIS"
+msgstr "NIS autentikācija"
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "pfm fonts conversion"
-msgstr "pfm fontu konvertēšana"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "Opcijai ``Ierobežot komandrindas opcijas'' nav jēgas bez paroles"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "ttf fonts conversion"
-msgstr "ttf fontu konvertēšana"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript atsauksmes"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Interneta savienojuma koplietošana pašlaik ir ieslēgta"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Fonts conversion"
-msgstr "Fontu konvertēšana"
+msgid "Card IO_0"
+msgstr "Kartes IO_0"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "True Type install done"
-msgstr "True Type instalēšana pabeigta"
+msgid "United Arab Emirates"
+msgstr "Apvienotie Arābu Emirāti"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "uzgaidiet ttmkfdir laikā..."
+msgid "Card IO_1"
+msgstr "Kartes IO_1"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "True Type fonts installation"
-msgstr "True Type fontu instalēšana"
+msgid "Thailand"
+msgstr "Taizeme"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Fonts copy"
+msgid "Routers:"
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Meklēt instalēto fontu sarakstā"
-
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr "netika atrasts neviens fonts.\n"
+msgid "Kazakhstan"
+msgstr "Kazahstāna"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Reselect correct fonts"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Display all available remote CUPS printers"
 msgstr ""
+"Atsvaidzināt printeru sarakstu (lai parādītu visus attāli pieejamos CUPS "
+"printerus)"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "nevarēju atrast nekādus fontus montētajās diska sadaļās"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux instalēšana %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "no fonts found"
-msgstr "fonti nav atrasti"
+msgid "Thai keyboard"
+msgstr "Tai tastatūra"
 
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "parse all fonts"
-msgstr "analizēt visus fontus"
+msgid "Dialup options"
+msgstr "Iezvanpieejas opcijas"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Bouvet Island"
+msgstr "Bouvet Island"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Search installed fonts"
-msgstr "Meklēt instalētos fontus"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
 "\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
-"Laipni lūdzam Interneta savienojuma koplietošansa utilītā!\n"
-"\n"
-"%s\n"
+"Nomainiet Cd-Rom!\n"
 "\n"
-"Klikšķiniet uz Konfigurēt, lai palaistu uzstādīšanas meistaru."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Interneta savienojuma koplietošanas konfigurācija"
+"Lūdzu ielieciet iekārtā Cd-Rom \"%s\", kad tas ir izdarīts, nospiediet Labi\n"
+"Ja jums nav šī diska, nospiediet Atcelt, lai neinstalētu no šī Cd-Rom."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneta savienojuma koplietošana nekad nav konfigurēta."
+msgid "Polish"
+msgstr "Polijas"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Uzstādīšana ir notikusi, un patreiz tā ir atļauts."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Uzstādīšana ir notikusi, bet patreiz tā ir aizliegta."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Tīkls ar webdav.\n"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
 msgstr ""
-"Viss ir konfigurēts.\n"
-"Tagad jūs varat dalīties Interneta savienojumā ar citiem jūsu lokālajam\n"
-"datortīklam pieslēgtiem datoriem, izmantojot automātisku tīkla "
-"konfigurēšanu\n"
-"(DHCP)."
-
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problēmas, instalējot pakotni %s"
+"Jūsu sistēmā nav atrasts neviens ethernet tīkla adapteris. Lūdzu izmantojiet "
+"dzelžu konfigurēšanas rīku."
 
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
 #, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Tiek konfigurēti skripti, instalētas programmas, startēti serveri..."
+msgid "Netmask"
+msgstr "Tīkla maska"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Configuring..."
-msgstr "Konfigurēju..."
+msgid "No hard drives found"
+msgstr "Cietņi netika atrasti"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potenciāls LAN adrešu konflikts atklāts šajā %s! konfigurācijā!\n"
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokālais tīkls nebeidzās ar `.0', programma tiek pabeigta."
+#: ../../mouse.pm:1
+#, c-format
+msgid "2 buttons"
+msgstr "2 pogas"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Pārkonfigurējiet saskarni un DHCP serveri"
+msgid "What kind is your ISDN connection?"
+msgstr "Kāds ir jūsu ISDN savienojuma veids?"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maksimālais nomas laiks (sekundēs)"
+msgid "Label"
+msgstr "Nosaukums"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The default lease (in seconds)"
-msgstr "Noklusētais nomas laiks (sekundēs)"
+msgid "Save on floppy"
+msgstr "Saglabāt disketē"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The DHCP end range"
-msgstr "DHCP beigu diapazons"
+msgid "Printer auto-detection"
+msgstr "Printeru automātiska noteikšana"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "Kura ir jūsu ISDN karte ?"
+
+#: ../../services.pm:1
 #, c-format
-msgid "The DHCP start range"
-msgstr "DHCP sākuma diapazons"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS ir populārs protokols failu koplietošanai TCP/IP tīklos.\n"
+"Šis serviss nodrošina NFS servera funkcionalitāti, un to var konfigurēt\n"
+"ar faila /etc/exports palīdzību."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "The internal domain name"
-msgstr "Ieksējais domēna vārds"
+msgid "Msec"
+msgstr "Msec"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "The DNS Server IP"
-msgstr "DNS servera IP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Ievērojiet, uzraksts mainījies:\n"
+"%s"
 
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Šī) DHCP servera IP"
+msgid "Number of capture buffers:"
+msgstr "Uztveršanas buferu skaits:"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Jūsu izvēle? (0/1, noklusēti %s) "
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
 "\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
 msgstr ""
-"DHCP servera konfigurēšana.\n"
+"Visas jaunizveidotās sadaļas ir jāformatē, pirms tās var izmantot\n"
+"(formatēšana nozīmē failsistēmas izveidošanu).\n"
 "\n"
-"Šeit varat izvēlēties dažādas DHCP servera konfigurācijas opcijas.\n"
-"Ja nezinat opcijas nozīmi, vienkārši atstājiet to tādu, kā ir.\n"
+"Tagad jūs arī varat izvēlēties pārformatēt dažas jau esošas sadaļas, lai\n"
+"izdzēstu tajās esošo informāciju. Ja jūs vēlaties to darīt, norādiet\n"
+"sadaļas, kuras vēlaties formatēt.\n"
+"\n"
+"Ņemiet vērā, ka nav nepieciešams pārformatēt visas jau eksistējošas "
+"sadaļas.\n"
+"Jums ir jāformatē sadaļas, kurās atrodas operētājsistēma (piemēram, \"/\",\n"
+"\"/usr\" vai \"/var\"), bet nav jāformatē sadaļas, kurās atrodas dati, ko\n"
+"jūs vēlaties saglabāt (parasti /home).\n"
+"\n"
+"Esiet uzmanīgi, izvēloties sadaļas, jo pēc formatēšanas visi dati būs\n"
+"iznīcināti un jūs vairs nevarēsit tos atjaunot.\n"
 "\n"
+"Noklikšķiniet \"Labi\", kad esat gatavi formatēt sadaļas.\n"
+"\n"
+"Noklikšķiniet \"Atcelt\", ja jūs gribat izvēlēties citas sadaļas, kur\n"
+"instalēt jauno Mandrake Linux operētājsistēmu."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Local Network adress"
-msgstr "Lokālā tīkla adrese"
+msgid "French"
+msgstr "Francijas"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "Čehijas (QWERTY)"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Patreizējā `%s' konfigurācija:\n"
-"\n"
-"Tīkls: %s\n"
-"IP adrese: %s\n"
-"IP atribūtika: %s\n"
-"Draiveris: %s"
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "Notiek noteikšana"
 
 #: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Parādīt pašreizējo interfeisa konfigurāciju"
+msgid "Net Device"
+msgstr "Xinetd serviss"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid "Show current interface configuration"
-msgstr "Parādīt pašreizējo interfeisa konfigurāciju"
+msgid "Summary"
+msgstr "Kopsavilkums"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No (experts only)"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
+" (Paralēlie porti: /dev/lp0, /dev/lp1, ..., ekvivalenti LPT1:, LPT2:, ..., "
+"1. USB printeris: /dev/usb/lp0, 2. USB printeris: /dev/usb/lp1, ...)."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automātiska pārkonfigurēšana"
+msgid "Next"
+msgstr "Tālāk"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
+#, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Jūs nevarat instalēt sāknētāju %s sadaļā\n"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
+
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
 "\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
 "\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
-"Brīdinājums, tīkla adapteris (%s) jau ir nokopnfigurēts.\n"
-"\n"
-"Vai vēlaties automātisku pārkonfigurēšanu?\n"
-"\n"
-"Jūs varat to veikt manuāli, bet Jums jāzin, ko darat."
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface already configured"
-msgstr "Tīkla interfeiss jau ir konfigurēts"
+msgid "Puerto Rico"
+msgstr "Puerto Riko"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
 msgstr ""
-"Lūdzu izvēlieties, kurš tīkla adapteris būs pievienots jūsu lokālajam "
-"datortīklam."
+"Priekš korektas darbības nepieciešama pakotne\n"
+"'ImageMagick'. Klikšķiniet uz \"Labi\", lai instalētu\n"
+"'ImageMagick', vai uz \"Atlikt\" lai izbeigtu"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lietuvas \"numuru rinda\" QWERTY"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
-"%s\n"
 "\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
 msgstr ""
-"Jūsu sistēmā ir tikai viens konfigurēts tīkla adapteris:\n"
+"Sekojošas pakotnes tiks noņemtas, lai varētu uzlabot Jūsu sistēmu: %s\n"
 "\n"
-"%s\n"
 "\n"
-"Vai vēlaties uzstādīt jūsu lokālo datortīklu ar šo adapteri?"
+"Vai tiešām vēlaties noņemt šīs pakotnes?\n"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface"
-msgstr "Tīkla interfeiss"
+msgid "Anguilla"
+msgstr "Angilja"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS domēns"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
 msgstr ""
-"Jūsu sistēmā nav atrasts neviens ethernet tīkla adapteris. Lūdzu izmantojiet "
-"dzelžu konfigurēšanas rīku."
+"\n"
+"- Lietotāju faili:\n"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "Jūsu sistēmā nav tīkla adaptera!"
+msgid "Antarctica"
+msgstr "Antarktīda"
 
-#
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Interface %s"
-msgstr "Interfeiss %s"
+msgid "Mount options"
+msgstr "Montēšanas iespējas:"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Saskarne %s (lietojot moduli %s)"
+msgid "Jamaica"
+msgstr "Jamaika"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Net Device"
-msgstr "Xinetd serviss"
-
-#: ../../standalone/drakgw:1
-#, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
+"Piešķirt tiešās ierīces bloku ierīcēm (tādām, kā cietā\n"
+"diska sadaļas), lai lietotu tādās aplikācijās, kā Oracle"
 
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
-"Jūs taisaties konfigurēt jūsu datoru Interneta savienojuma koplietošanai.\n"
-"Ar šo iespēju datoru var konfigurēt tā, lai kopīgi izmantotu Interneta "
-"savienojumu.\n"
-"\n"
-"Piezīme: jums ir nepieciešams atsevišķs tīkla adapteris, lai uzstādītu "
-"lokālo datortīklu (LAN).\n"
-"\n"
-"Vai vēlaties uzstādīt Interneta savienojuma koplietošanu?"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Internet Connection Sharing"
-msgstr "Interneta savienojuma koplietošana"
+msgid "Please wait, preparing installation..."
+msgstr "Lūdzu gaidiet, gatavoju instalāciju"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Internet savienojuma koplietošana tagad ir ieslēgta."
+msgid "Czech (QWERTZ)"
+msgstr "Čehijas (QWERTZ)"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Enabling servers..."
-msgstr "Atļauju serverus..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Sekot tīkla kartes id (noder klēpjdatoriem)"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "dismiss"
-msgstr "atmest"
+msgid "The port number should be an integer!"
+msgstr "Porta numuram ir jābūt skaitlim!"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "reconfigure"
-msgstr "pārkonfigurēt"
+msgid "You must choose an image file first!"
+msgstr "Vispirms ir jāizvēlās attēla fails!"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "enable"
-msgstr "ieslēgt"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneta savienojuma koplietošana jau ir uzstādīta.\n"
-"Pašlaik tā ir atslēgta.\n"
-"\n"
-"Ko jūs vēlaties darīt?"
+msgid "Restore from Hard Disk."
+msgstr "Atjanot no cietā diska:"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneta savienojuma koplietošana pašlaik ir atslēgta"
+msgid "Add to LVM"
+msgstr "Pievienot LVM"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Internet savienojuma koplietošana tagad ir atslēgta."
+msgid "DNS server"
+msgstr "DNS serveris"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Disabling servers..."
-msgstr "Aizliedzu serverus..."
+msgid "Trinidad and Tobago"
+msgstr "Trinidada un Tobago"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "disable"
-msgstr "atslēgt"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD un LPRng neatbalsta IPP printerus.\n"
 
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneta savienojuma koplietošana jau ir uzstādīta.\n"
-"Pašlaik tā ir ieslēgta.\n"
-"\n"
-"Ko jūs vēlaties darīt?"
+msgid "simple"
+msgstr "vienkāršs"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneta savienojuma koplietošana pašlaik ir ieslēgta"
+msgid "Clear all"
+msgstr "Visu dzēst"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Diemžēl mēs atbalstām tikai 2.4 kodolus."
+msgid "No test pages"
+msgstr "Bez izmēģinājuma lapām"
 
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Adapter %s: %s"
+msgstr "Adapteris %s: %s"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Path"
-msgstr "Ceļš"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Folklendu salas"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "group :"
-msgstr "grupa :"
+msgid "Unknown model"
+msgstr "Nezināms modelis"
 
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "user :"
-msgstr "lietotājs :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
 
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Path selection"
-msgstr "Ceļa izvēle"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Autentifikācija"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "kad atzīmēts, īpašnieks un grupa netiks izmainīti"
+msgid "Backup Now"
+msgstr "Sākt dublēšanu"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Use group id for execution"
-msgstr "Lietot grupas id izpildei"
+msgid "/_File"
+msgstr "/_Fails"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use owner id for execution"
-msgstr "Lietot īpašnieka id izpildei"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Noņemu printeri no Star Office/OpenOffice.org/GIMP"
 
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (TSCII)"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Mayotte"
+msgstr "Majota"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Creating auto install floppy..."
+msgstr "Sagatavoju auto instalēšanas disketi"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "Pieejamie printeri"
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Partitioning"
+msgstr "Drukāšana"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Russia"
+msgstr "Krievijas"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Property"
-msgstr "Īpašība"
+msgid "ethernet card(s) detected"
+msgstr "ethernet karte(s) atrasta"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Permissions"
-msgstr "Tiesības"
+msgid "Syslog"
+msgstr "Syslog"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Current user"
-msgstr "Pašreizējais lietotājs"
+msgid "Can't create catalog!"
+msgstr "Nevar izveidot katalogu!"
 
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "browse"
-msgstr "pārlūkot"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Edit current rule"
-msgstr "Labot pašreizējo noteikumu"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nepietiek brīvas vietas, lai izvietotu automātiski"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "edit"
-msgstr "labot"
+msgid "Set root password"
+msgstr "root paroles izvēle"
 
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Nav zināms alternatīvs OSS/ALSA draiveris priekš Jūsu skaņu kartes (%s) kura "
+"patreiz izmanto \"%s\""
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Delete selected rule"
-msgstr "Dzēst izvēleto noteikumu"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Pēc sadaļas %s izmēra maiņas visi šajā sadaļā esošie dati tiks pazaudēti"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "delete"
-msgstr "dzēst"
+msgid "Internet connection configuration"
+msgstr "Interneta savienojuma konfigurācija"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Add a new rule at the end"
-msgstr "Pievienot jaunu noteikumu beigās"
+msgid "Scanning for TV channels"
+msgstr "Notiek TV kanālu skanēšana ..."
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "add a rule"
-msgstr "pievienot noteikumu"
+msgid "Kernel:"
+msgstr "Kodols:"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Move selected rule down one level"
-msgstr "Nolaist izvēlēto noteikumu par vienu līmeni"
+msgid "/_About..."
+msgstr "/P_ar..."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Down"
-msgstr "Uz leju"
+msgid "Bengali"
+msgstr "Bengāļu"
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Move selected rule up one level"
-msgstr "Pacelt izvēlēto noteikumu par vienu līmeni"
+msgid "Preference: "
+msgstr "Priekšroka: "
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Up"
-msgstr "Uz augšu"
+msgid "Wizard..."
+msgstr "Meistars..."
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "select perm file to see/edit"
-msgstr "izvēlieties perm failu apskatei/rediģēšanai"
+msgid "Services: %d activated for %d registered"
+msgstr "Servisi: %d aktivizēti no %d reģistrētiem"
 
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
+msgid "Create a bootdisk"
+msgstr "Sistēmdisketes radīšana"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "permissions"
-msgstr "tiesības"
+msgid "Solomon Islands"
+msgstr "Zālamana salas"
 
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "group"
-msgstr "grupa"
+msgid "(module %s)"
+msgstr "(modulis %s)"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "user"
-msgstr "lietotājs"
+msgid "Workgroup"
+msgstr "Darba grupa"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "path"
-msgstr "ceļš"
+msgid "Printer host name or IP"
+msgstr "Printera resursa vārds vai IP"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Creating auto install floppy"
+msgid "Host Path or Module"
+msgstr "Hosta ceļš vai modulis"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Printera vārdam jāsatur tikai burtus, ciparus un pasvītrojumu"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
+msgid "Show current interface configuration"
+msgstr "Parādīt pašreizējo interfeisa konfigurāciju"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Printeris nav atrasts!"
+#
+#: ../../help.pm:1
+#, c-format
+msgid "Development"
+msgstr "Izstrāde"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (instalācijas displeja draiveris)"
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Done"
+msgstr "Izdarīts"
 
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Web Server"
+msgstr "Web serveris"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP beigu diapazons"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr "\tNeiekļaut sistēmas failus\n"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP sākuma diapazons"
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Čīle"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Saskarne %s (lietojot moduli %s)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
-"Lūdzu norādiet, kuru tīkla adapteri vēlaties izmantot Interneta savienojumam."
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
-"Jūs taisaties konfigurēt jūsu datoru Interneta savienojuma koplietošanai.\n"
-"Ar šo iespēju datoru var konfigurēt tā, lai kopīgi izmantotu Interneta "
-"savienojumu.\n"
-"\n"
-"Piezīme: jums ir nepieciešams atsevišķs tīkla adapteris, lai uzstādītu "
-"lokālo datortīklu (LAN).\n"
-"\n"
-"Vai vēlaties uzstādīt Interneta savienojuma koplietošanu?"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "dhcpd servera konfigurācija"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "dhcpd servera konfigurācija"
-
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please wait, setting security options..."
-msgstr "Lūdzu uzgaidiet, uzstādu drošības parametrus..."
+msgid "(already added %s)"
+msgstr "(jau pievienots %s)"
 
-#: ../../standalone/draksec:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Please wait, setting security level..."
-msgstr "Lūdzu uzgaidiet, uzstādu drošības līmeni"
+msgid ", using command %s"
+msgstr ", lietojot komandu %s"
 
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Periodic Checks"
-msgstr "Periodiskas pārbaudes"
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt un Shift taustiņi vienlaicīgi"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "System Options"
-msgstr "Sistēmas opcijas"
+msgid "Flags"
+msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Network Options"
-msgstr "Tīkla opcijas"
+msgid "Add/Del Users"
+msgstr "Pielikt/noņemt lietotājus"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+msgid "Host/network IP address missing."
 msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Security Administrator:"
-msgstr "Drošības administrators:"
+msgid "weekly"
+msgstr "ik nedēļu"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Security Alerts:"
-msgstr "Drošības trauksmes:"
+msgid "Settings"
+msgstr "Uzstādījumi"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Security Level:"
-msgstr "Drošības līmenis:"
+msgid "The entered host/network IP is not correct.\n"
+msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (noklusēts: %s)"
+msgid "Here is the full list of available countries"
+msgstr "Šeit ir pilns pieejamo tastatūru saraksts"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternatīva izmēģinājuma lapa (A4)"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
-"\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
-"\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
+"Ja jums ir visi šajā sarakstā norādītie CD, nospiediet Labi.\n"
+"Ja jums nav neviena no norādītajiem CD, nospiediet Atcelt.\n"
+"Ja trūkst tikai dažu CD, sarakstā atslēdziet tos un nospiediet Labi."
 
-#: ../../standalone/draksound:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr "Lūdzu uzgaidiet"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup user files"
+msgstr "Atjaunot lietotāja failus"
+
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "New"
+msgstr "Jauns"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
-msgstr ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
 "\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
 "\n"
-"Ievērojiet: ja Jums ir ISA PnP skaņu karte, Jums būs jālieto sndconfig "
-"programma. Vienkārši uzrakstiet \"sndconfig\" konsolē."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
 
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
 msgstr ""
+"Šobrīd ir laiks izvēlēties nepieciešamo datora drošības līmeni.\n"
+"XXXXX jo dators ir atklātāks, un jo kritiskāki ir uz tā novietotie dati,\n"
+"jo augstākam vajadzētu būt drošības līmenim.\n"
+"Taču augstāks drošības līmenis tiek iegūts uz lietošanas ērtuma\n"
+"rēķina. Meklējiet nodaļu \"msec\" rokasgrāmatā ``Reference Manual'',\n"
+"lai iegūtu vairāk informācijas par šo līmeņu nozīmi.\n"
+"\n"
+"Ja Jūs neziniat, ko izvēlēties, atstājiet noklusēto opciju."
 
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No Sound Card detected!"
-msgstr "Skaņu karte nav atrasta!"
+msgid "Load from floppy"
+msgstr "Ielādēt no disketes"
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "%s BootSplash (%s) preview"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
 msgstr ""
+"Sekojoši printeri\n"
+"\n"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Generating preview ..."
-msgstr "Ģenerēju paraugu..."
+msgid "Boot Floppy"
+msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You must choose an image file first!"
-msgstr "Vispirms ir jāizvēlās attēla fails!"
+msgid "Norwegian"
+msgstr "Norvēģijas"
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "ProgresaJoslas krāsas izvēle"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "Pieejamie printeri"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr ""
+msgid "Apache World Wide Web Server"
+msgstr "Apache WWW serveris"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "choose image file"
-msgstr "izvēlieties attēla failu"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "izvēlieties attēla failu"
+msgid "select path to restore (instead of /)"
+msgstr "izvēlieties ceļu, uz kuru atjaunot (ja ne uz /)"
 
 #: ../../standalone/draksplash:1
 #, fuzzy, c-format
 msgid "Configure bootsplash picture"
 msgstr "Konfigurēt ielādes sākuma ekrāna attēlu"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Izveidot kodola paziņojumus klusus pēc noklusēšanas"
+msgid "China"
+msgstr "Ķīna"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Display logo on Console"
-msgstr "Attēlot logo konsolē."
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "(Pārliecinieties, ka visi jūsu printeri ir pievienoti un ieslēgti).\n"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose color"
-msgstr "Izvēlieties krāsu"
+msgid "Georgia"
+msgstr "Gruzija"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Reading data of installed printers..."
+msgstr "Pieejamie printeri"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Save theme"
-msgstr "Saglabāt tēmu"
+msgid " Erase Now "
+msgstr " Dzēst tagad"
 
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Preview"
-msgstr "Paraugs"
+msgid "server"
+msgstr "serveris"
 
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "the color of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Ielieciet FAT formatētu disketi iekārtā %s"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "the height of the progress bar"
+msgid "yes means the processor has an arithmetic coprocessor"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "the width of the progress bar"
+msgid "Please Wait... Applying the configuration"
+msgstr "Lūdzu uzgaidiet ... konfigurācijas piemērošana"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Juus sveic GRUB, opereetaajsisteemu izveeles programma!"
+
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr "Grub"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "SCSI controllers"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " uz LPD servers \"%s\", printeris \"%s\""
+
+#: ../../standalone/drakedm:1
+#, c-format
+msgid "Choosing a display manager"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Resursa vārds"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP adreses formātam jābūt 1.2.3.4"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr "Ekvadora"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Add an item"
+msgstr "Pievienot vienību"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "text box height"
-msgstr "teksta laukuma augstums"
+msgid "I can't find needed image file `%s'."
+msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "text width"
-msgstr "teksta platums"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Nav atrasta skaņu karte. Pēc instalēšanas izmēģiniet \"harddrake\""
 
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
 msgstr ""
-"teksta laukuma y koordināte,\n"
-"simbolu skaits"
+"Norādīts nepareizs ports: %s.\n"
+"Pareizs formāts ir \"ports/tcp\" vai \"ports/udp\", \n"
+"kur ports ir no 1 līdz 65535."
 
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Čaula"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
 msgstr ""
-"teksta laukuma x koordināte,\n"
-"simbolu skaits"
 
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Browse"
-msgstr "Pārlūkot"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Nevar pieslēgties ar lietotāja vārdu %s (nepareiza parole?)"
 
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Theme name"
-msgstr "Tēmas nosaukums"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidžānas (latīņu)"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package not installed"
+msgstr "Nav instalēts"
+
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "final resolution"
-msgstr "galējā izšķirtspēja"
+msgid "Become a MandrakeExpert"
+msgstr "Kļūstiet par MandrakeEkspertu"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "first step creation"
+msgid "American Samoa"
+msgstr "Amerikāņu Samoa"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Protocol"
+msgstr "Protokols"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "Harddrake help"
+msgstr "HardDrake palīdzība"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
 msgstr ""
-"Priekš korektas darbības nepieciešama pakotne\n"
-"'ImageMagick'. Klikšķiniet uz \"Labi\", lai instalētu\n"
-"'ImageMagick', vai uz \"Atlikt\" lai izbeigtu"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Mandrake termināļu servera konfigurācija"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
 "\n"
-"\n"
-"You can visit our hardware database at:\n"
+"                    DrakBackup Report Details\n"
 "\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
-"Jūsu datora TV karte netika noteikta. Lūdzu pārliecinieties, ka Linux "
-"atbalstīta Video/TV karte ir pareizi iesprausta.\n"
 "\n"
-"\n"
-"Jūs varat aplūkot mūsu aparatūras datubāzi šeit:\n"
+"                    DrakBackup ziņojuma detaļas\n"
 "\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No TV Card detected!"
-msgstr "Nav atrasta TV karte!"
+msgid "Restore all backups"
+msgstr "Atjaunot visas rezerves kopijas"
 
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Tagad Jūs varat izpildīt xawtv (zem X Window!) !\n"
+msgid "if set to yes, check open ports."
+msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Have a nice day!"
-msgstr "Lai jums jauka diena!"
+msgid "This may take a moment to erase the media."
+msgstr "Var paiet kāds brīdis, kamēr tiek izdzēsts datu nesējs."
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV nav instalēts!"
+msgid "You can't select/unselect this package"
+msgstr "Jūs varat izvēlēties/atteikties no šīs pakotnes"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "TV kanālu skenēšanas laikā bija kļūda"
+msgid "Warning"
+msgstr "Uzmanību"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Scanning for TV channels"
-msgstr "Notiek TV kanālu skanēšana ..."
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Citi faili:\n"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Notiek TV kanālu skanēšana ..."
+msgid "Remote host name"
+msgstr "Attālā resursa nosaukums"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Area:"
-msgstr "Apgabals:"
+msgid "deactivate now"
+msgstr "deaktivizēt"
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "TV norm:"
-msgstr "TV formāts:"
+msgid "access to X programs"
+msgstr "piekļuve X programmām"
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Lūdzu,\n"
-"ieraksties Jūsu TV standrtu un valsti"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "Izmantot Windows sadaļas brīvo vietu"
 
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #: ../../standalone/drakxtv:1
 #, c-format
-msgid "Australian Optus cable TV"
-msgstr "Austrāliešu Optus kabeļu TV"
+msgid "Italy"
+msgstr "Itālija"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Newzealand"
-msgstr "Jaunzēlande"
+msgid "Name of printer"
+msgstr "Printera nosaukums"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "France [SECAM]"
-msgstr "Francija [SECAM]"
+msgid "disable"
+msgstr "atslēgt"
 
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "East Europe"
-msgstr "Austrumeiropa"
+msgid "error unmounting %s: %s"
+msgstr "kļūda nomontējot %s: %s"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "West Europe"
-msgstr "Rietumeiropa"
+msgid "Do it!"
+msgstr "Aiziet!"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "China (broadcast)"
-msgstr "China (broadcast)"
+msgid "Cayman Islands"
+msgstr "Kaimanu salas"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Japan (cable)"
-msgstr "Japan (cable)"
+msgid "%s not responding"
+msgstr "%s neatsaucas"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (broadcast)"
+msgid "Select model manually"
+msgstr "Manuāli izvēlieties modeli"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Canada (cable)"
-msgstr "Kanāda (kabelis)"
+msgid "Format"
+msgstr "Formatēt"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"Parastākais veids, kā savienoties ar adsl, ir pppoe.\n"
+"Daži pieslēgumi izmanto pptp, pavisam nedaudzi dhcp.\n"
+"Ja jūs nezinat, izvēlieties 'izmantot pppoe'"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "USA (cable)"
-msgstr "ASV (kabelis)"
+msgid "Various"
+msgstr "Dažādi"
 
-#: ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
+msgid "Zip"
+msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
 "\n"
 "\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "primary"
-msgstr "primārais"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "secondary"
-msgstr "sekundārs"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
 msgstr ""
+"\n"
+"Atzīmējiet printerus, kurus vēlaties pārcelt, un\n"
+"klikšķiniet uz \"Pārcelt\"."
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Nezināms modelis"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Nezināms modelis"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Izpildu \"%s\" ..."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Run config tool"
-msgstr "Izpildīt config rīku"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Configure module"
-msgstr "Moduļa konfigurēšana"
+msgid "PDQ"
+msgstr "PDQ"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Information"
-msgstr "Informācija"
+msgid "Albanian"
+msgstr "Albāņu"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Detected hardware"
-msgstr "Noteiktā aparatūras"
+msgid "Lithuania"
+msgstr "Lietuva"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid "Harddrake2 version "
-msgstr "HardDrake2 versija"
+msgid "Compact"
+msgstr "Kompakts"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Detection in progress"
-msgstr "Notiek noteikšana"
+msgid "Detected model: %s %s"
+msgstr "Atklātais modelis: %s %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Author:"
-msgstr "Autors:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
 
 #: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
 "This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
 msgstr ""
 "Šis ir HardDrake, Mandrake aparatūras konfigurēšanas rīks.\n"
 "Versija:"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "About Harddrake"
-msgstr "Par HardDrake"
+msgid "Local files"
+msgstr "Lokālie faili"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "/_About..."
-msgstr "/P_ar..."
+msgid "maybe"
+msgstr "varbūt"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "/_Report Bug"
-msgstr "/_Ziņot kļūdu"
+msgid "Panama"
+msgstr "Panama"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"Liekas, ka Jūsu grafiskajai kartei ir TV-OUT savienotājs.\n"
+"To var nokonfigurēt, lai tiktu lietots kadru buferis.\n"
+"\n"
+"Priekš tā Jums jāpievieno Jūsu grafiskā karte pie TV pirms datora "
+"startēšanas.\n"
+"Tad izvēlieties \"TVout\" ierakstu IN THE BOOTLOADER\n"
+"\n"
+"Vai Jums ir šī iespēja?"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Monitors"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Izvēlieties skeneri"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "65 thousand colors (16 bits)"
+msgstr "65 tūkstoši krāsu (16 biti)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Description of the fields:\n"
 "\n"
+"- Save on Hard drive on path: %s\n"
 msgstr ""
-"Lauku apraksts:\n"
 "\n"
+"- Saglabāt uz cietā diska ceļā: %s\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Harddrake help"
-msgstr "HardDrake palīdzība"
+msgid "Size: %d KB\n"
+msgstr "Apjoms: %d KB\n"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Apraksts"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Remove fonts on your system"
+msgstr ""
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "/_Help"
-msgstr "/_Palīdzība"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Brīdinājums, tīkla adapteris (%s) jau ir nokopnfigurēts.\n"
+"\n"
+"Vai vēlaties automātisku pārkonfigurēšanu?\n"
+"\n"
+"Jūs varat to veikt manuāli, bet Jums jāzin, ko darat."
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "/_Quit"
-msgstr "/_Iziet"
+msgid "Graphical interface at startup"
+msgstr "X pēc startēšanas"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Automātiska noteikšana"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the directory to save:"
+msgstr "Lūdzu, ievadiet direktoriju, kurā saglabāt:"
 
 #: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Automātiska noteikšana"
+#, c-format
+msgid "format of floppies supported by the drive"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Automātiska noteikšana"
+#: ../../raid.pm:1
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nepietiek diska sadaļu RAID līmenim %d\n"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/_Options"
-msgstr "/_Opcijas"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Ir konfigurēti sekojoši printeri. Ar dubultklikšķi izvēlieties printeri, lai "
+"nomainītu tā uzstādījumus, padarītu to par noklusēto printeri vai apskatītos "
+"informāciju par to."
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the vendor name of the processor"
-msgstr "ierīces pārdevēja nosaukums"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Connected"
+msgstr "Savienots"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "the vendor name of the device"
-msgstr "ierīces pārdevēja nosaukums"
+msgid "USB printer \\#%s"
+msgstr "USB printeris \\/*%s"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Lūdzu izvēlieties, ar kuru seriālo portu ir saslēgta pele."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Macedonian"
+msgstr "Maķedonijas"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid "Bridges and system controllers"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "ielādēt uzstādījumu"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of the processor"
-msgstr "ierīces pārdevēja nosaukums"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/Fails/_Saglabāt"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Processor ID"
-msgstr ""
+msgid "Mali"
+msgstr "Mali"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "network printer port"
-msgstr ", tīkla printeris \"%s\", ports %s"
+msgid "No details"
+msgstr "Detaļas"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "ierīces pārdevēja nosaukums"
+#: ../../pkgs.pm:1
+#, c-format
+msgid "very nice"
+msgstr "ļoti derīga"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Vārds: "
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Preview"
+msgstr "Paraugs"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "ierīces pārdevēja nosaukums"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Remote Control"
+msgstr "Attālināta kontrole"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Number of buttons"
-msgstr "Pogu skaits"
+msgid "Please select media for backup..."
+msgstr "Lūdzu, izvēlieties dublēšanas mēdiju"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Official vendor name of the cpu"
-msgstr "ierīces pārdevēja nosaukums"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 serveris: %s\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Model name"
-msgstr "Moduļa nosaukums"
+msgid "Allow Thin Clients"
+msgstr "Pielikt/noņemt klientus"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Gruzijas (\"krievu\" izvietojums)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Model"
-msgstr "Modelis"
+msgid "/_Options"
+msgstr "/_Opcijas"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "hard disk model"
-msgstr "cietņa modelis"
+msgid "Your printer model"
+msgstr "Jūsu printera modelis"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid "class of hardware device"
-msgstr "Aparatūras iekārtas klase"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(BRĪDINĀJUMS! Jūs lietojat XFS priekš saknes diska sadaļas,\n"
+"ielādes diska izveide uz 1.44 Mb disketes visdrīzāk neizdosies,\n"
+"jo XFS nepieciešams ļoti apjomīgs draiveris)."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Media class"
-msgstr "Mēdiju klase"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Izdzēst cietā diska tar failus pēc dublēšanas.\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
 #, fuzzy, c-format
-msgid "Level"
-msgstr "līmenis"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrake termināļu servera konfigurācija"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "Save"
+msgstr "Saglabāt"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatēt"
+msgid "The %s is unsupported"
+msgstr "Šis %s skeneris netiek atbalstīts"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
+#, c-format
+msgid "Load the drivers for your usb devices."
+msgstr "Ielādē draiverus jūsu usb ierīcēm."
+
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Dānijas"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter a printer device URI"
+msgstr "Ievadiet printera ierīces URI"
+
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
 msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "Israel"
+msgstr "Izraēla"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "French Guiana"
+msgstr "Franču Gviāna"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "add a rule"
+msgstr "pievienot noteikumu"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A command line must be entered!"
+msgstr "Jāievada pareizs URI!"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "Select user manually"
+msgstr "Izvēlēties lietotāju manuāli"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Transfer printer configuration"
+msgstr "Pārsūtu printera konfigurāciju"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Vai vēlaties ieslēgt drukāšanu uz augstāk norādītajiem printeriem?\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Ports"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Use network connection to backup"
+msgstr "Dublēšanai lietot tīkla savienojumu"
 
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "CPU flags reported by the kernel"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "Flags"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "GNU/Linux kodola modulis, kas regulē to ierīci"
+msgid "Accept user"
+msgstr "Apstiprināt lietotāju"
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Module"
-msgstr "Modulis"
+msgid "Server"
+msgstr "Serveris"
 
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Slikta izvēle, pamēģiniet vēlreiz\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Heard and McDonald Islands"
+msgstr "Herda sala un Makdonalda salas"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "New devfs device"
-msgstr "Jaunā devfs iekārta"
+msgid "No alternative driver"
+msgstr "Nav alternatīva draivera"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Pārslēgt eksperta režīmā"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Old device file"
-msgstr "Vecais iekārtas fails"
+msgid "(on this machine)"
+msgstr "(pie šī datora)"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "This field describes the device"
-msgstr "šis lauks apraksta iekārtu"
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Vārtejas adreses formātam ir jābūt 1.2.3.4"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
 #, c-format
 msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Looking at packages already installed..."
+msgstr "Meklēju jau iepriekš uzinstalētās pakotnes..."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid "Use Differential Backups"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Drošības līmenis"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid "Driver"
+msgstr "Draiveris"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
 msgstr ""
+"Linuxconf dažreiz piemēros dažādus uzdevumus \n"
+"ielādes laikā, lai uzturētu sistēmas konfigurāciju."
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "Printeris uz attāla lpd servera"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
+"Pirms instalēt fontus, pārliecinieties vai Jums ir tiesības tos lietot un "
+"instalēt uz sistēmas.\n"
+"\n"
+"-Jūs varat instalēt fontus normālā veidā. Retos gadījumos dīvaini fonti var "
+"uzkārt X serveri."
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "Coma bug"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No mouse"
+msgstr "Nav peles"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Germany"
+msgstr "Vācija"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "Austria"
+msgstr "Austrija"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cache size"
-msgstr "gabala izmērs"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Pēc instalēšanas palaidiet \"sndconfig\", lai konfigurētu skaņu karti"
 
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
+msgid "Collapse Tree"
+msgstr "Sakļaut koku"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Auto Install Configurator"
+msgstr "Automātiskās instalēšanas konfigurētājs"
 
-#: ../../standalone/harddrake2:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
+msgid "Configure networking"
+msgstr "Tīkla konfigurēšana"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bus identification"
-msgstr "Kopnes identifikācija"
+msgid "Where do you want to install the bootloader?"
+msgstr "Kur jūs vēlaties instalēt sāknētāju?"
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Šī Mandrake Linux versija neatbalsta %s."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI kanāls"
+msgid "DHCP client"
+msgstr "DHCP klients"
 
-#: ../../standalone/harddrake2:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Channel"
-msgstr "Kanāls"
+msgid "Restoring from file %s failed: %s"
+msgstr "Atjaunošana no faila %s neizdevās: %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (seriāla, vecs C7 tips)"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Bus"
-msgstr "Kopne"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Vai tiešām vēlaties uzstādīt drukāšanu uz šī datora?\n"
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "šīs skaņu kartes alternatīvo draiveru saraksts"
+msgid "New devfs device"
+msgstr "Jaunā devfs iekārta"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Alternative drivers"
-msgstr "alternatīvi draiveri"
+msgid "ERROR: Cannot spawn %s."
+msgstr "KĻŪDA: nevar pavairot %s."
 
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vai vēlaties, lai BackSpace konsolē darbotos kā Delete?"
+msgid "Boot Style Configuration"
+msgstr "Sāknēšanas stila konfigurēšana"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Automātiska laika sinhronizācija (izmantojot NTP)"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Lūdzu izvēlieties jūsu tastatūras izkārtojumu."
+msgid "Backup files not found at %s."
+msgstr "Rezerves kopijas faili nav atrasti uz %s."
 
-#: ../../standalone/livedrake:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Neizdodas uzsākt uzlabošanu no tīkla !!!\n"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Paldies, ka izvēlējāties Mandrake Linux 9.1"
 
-#: ../../standalone/livedrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Lūdzu ielieciet instalācijas Cd-Rom un nospiediet Labi, kad tas izdarīts.\n"
-"Ja jums nav šī diska, nospiediet Atcelt, lai neuzsāktu uzlabošanu no tīkla."
+msgid "Armenian (phonetic)"
+msgstr "Armēnijas (fonētiskā)"
 
-#: ../../standalone/livedrake:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Change Cd-Rom"
-msgstr "Nomainiet Cd-Rom"
+msgid "Card model:"
+msgstr "Kartes modelis:"
 
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Izmaiņa ir notikusi, bet, lai to padarītu efektīvu, Jums jāatslēdzas."
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Save as.."
-msgstr "Saglabāt kā..."
+msgid "Thin Client"
+msgstr "DHCP klients"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Please enter your email address below "
-msgstr "Lūdzu zemāk ievadiet savu epasta adresi"
+msgid "Start Server"
+msgstr "Startēt serveri"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "alert configuration"
-msgstr "trauksmes konfigurācija"
+msgid "Turkmenistan"
+msgstr "Turkmenistāna"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Jūs saņemsit trauksmes signālu, kad noslodze pārsniegs šo vērtību"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "(pie šī datora)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "load setting"
-msgstr "ielādēt uzstādījumu"
+msgid "Install themes"
+msgstr "Instalēt tēmas"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
-"Jūs saņemsit trauksmes signālu, ja kāds no izvelētajiem servisiem vairs "
-"nedarbojas"
+" jauninājumi 2002 MandrakeSoft, Stew Benedict <sbenedict\\@mandrakesoft.com>"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "service setting"
-msgstr "servisa uzstādījums"
+msgid "Espanol"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd serviss"
+msgid "Preparing installation"
+msgstr "Sagatavoju instalēšanu"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Webmin Service"
-msgstr "Webmin serviss"
+msgid "Edit selected host/network"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "SSH Server"
-msgstr "SSH serveris"
+msgid "Add User -->"
+msgstr "Pievienot lietotāju -->"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Samba Server"
-msgstr "Samba serveris"
+msgid "Nauru"
+msgstr "Nauru"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix pasta serveris"
+msgid "True Type fonts installation"
+msgstr "True Type fontu instalēšana"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ftp Server"
-msgstr "Ftp serveris"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
+"Automātiski noteikt printerus, kas pa tiešo pievienoti lokālajam tīklam"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Domēna vārdu atrisinātājs"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "LAN configuration"
+msgstr "LAN konfigurācija"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache WWW serveris"
+msgid "hard disk model"
+msgstr "cietņa modelis"
 
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+msgid "You can't use a LVM Logical Volume for mount point %s"
 msgstr ""
-"Laipni lūdzam pasta konfigurēšanas utilītā.\n"
-"\n"
-"Sēit Jūs varēsiet uzstādīt brīdinājumu sistēmu.\n"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Mail alert configuration"
-msgstr "Pasta trauksmes konfigurēšana"
+msgid "Get Windows Fonts"
+msgstr "Paņemt Windows fontus"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Mail alert"
-msgstr "Pasta trauksme"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "please wait, parsing file: %s"
-msgstr "lūdzu gaidiet, analizēju failu: %s"
+msgid "Iranian"
+msgstr "Irānas"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Content of the file"
-msgstr "Faila saturs"
+msgid "Croatia"
+msgstr "Horvātija"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Calendar"
-msgstr "Kalendārs"
+msgid "Gateway:"
+msgstr "Vārteja:"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Choose file"
-msgstr "Izvēlieties failu"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Pievienot lietotāju"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "but not matching"
-msgstr "bet nesakrīt"
+msgid "Remote printer name"
+msgstr "Attālā printera nosaukums"
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "matching"
-msgstr "sakrīt"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
+msgstr ""
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Settings"
-msgstr "Uzstādījumi"
+msgid "Device: "
+msgstr "Ierīce: "
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
 #, c-format
-msgid "A tool to monitor your logs"
-msgstr "Rīks žurnālu pārlūkošanai"
+msgid "Printerdrake"
+msgstr "Printerdrake"
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "search"
-msgstr "meklēt"
+msgid "License agreement"
+msgstr "Licences līgums"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Mandrake rīku apraksti"
+msgid "System Options"
+msgstr "Sistēmas opcijas"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Please enter the directory where backups are stored"
+msgstr "Lūdzu ievadiet direktoriju, kurā tiek glabātas rezerves kopijas"
 
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Messages"
-msgstr "Ziņojumi"
+msgid "Please choose the desired security level"
+msgstr "Izvēlieties vēlamo drošības līmeni?"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "User"
-msgstr "Lietotājs"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Palīdzība/_Par..."
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", USB printer"
+msgstr ", USB printeris \\/*%s"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "/Options/Test"
-msgstr "/Opcijas/Tests"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Izvēlieties aplikācijas, kas atbalstīs fontus:"
 
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "/File/-"
-msgstr "/Fails/-"
+msgid "Configure X"
+msgstr "X konfigurēšana"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "/File/Save _As"
-msgstr "/Fails/Saglabāt _kā"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turcijas (tradicionālais \"F\" modelis)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Congratulations!"
+msgstr "Apsveicam!"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "/File/_Save"
-msgstr "/Fails/_Saglabāt"
+msgid "Use owner id for execution"
+msgstr "Lietot īpašnieka id izpildei"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Down"
+msgstr "Uz leju"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/File/_Open"
-msgstr "/Fails/_Atvērt"
+msgid "Raw printer (No driver)"
+msgstr "Tiešais printeris (bez draivera)"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Install rpm"
+msgstr "Instalēt"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/File/_New"
-msgstr "/Fails/_Jauns"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Show only for the selected day"
-msgstr "Rādīt tikai izvēlētajai dienai"
+msgid "Time remaining "
+msgstr "Atlikušais laiks"
 
-#: ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Emulate third button?"
-msgstr "Vai emulēt trešo pogu?"
+msgid "UK keyboard"
+msgstr "Apvienotās Karalistes"
 
-#: ../../standalone/mousedrake:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Please choose your mouse type."
-msgstr "Lūdzu izvēlieties jūsu peles tipu."
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Savienot"
+msgid "Unmount"
+msgstr "Nomontēt"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Atvienot"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Uninstall Fonts"
+msgstr "Atinstalēt fontus"
 
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "received"
-msgstr ""
+msgid "German (no dead keys)"
+msgstr "Vācijas (bez mēmajiem taustiņiem)"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Transferring %s..."
+msgstr "Pārvietoju %s..."
 
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "received: "
-msgstr ""
+msgid "32 thousand colors (15 bits)"
+msgstr "32 tūkstoši krāsu (15 biti)"
 
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
 #, c-format
-msgid "sent: "
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
 msgstr ""
+"Jūs varat eksportēt, lietojot NFS vai Samba. Lūdzu izvēlieties, kuru "
+"vēlaties lietot."
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Local measure"
-msgstr "Lokālie faili"
+msgid "Reboot"
+msgstr "Sakne"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "average"
-msgstr ""
+msgid "Gambia"
+msgstr "Gambija"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "trauksmes konfigurācija"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Mandrake Control Center"
+msgstr "Mandrake kontroles centrs"
 
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
 msgstr ""
+"Jūs varat ievadīt dažādus portus.\n"
+"Derīgi piemēri ir: 139/tcp 139/udp.\n"
+"Aplūkojiet /etc/services lai iegūtu vairā\n"
+"informācijas."
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Savienojuma ātrums"
-
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
 #, c-format
-msgid "Disconnection from the Internet complete."
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Disconnection from the Internet failed."
+msgid "\t-Tape \n"
+msgstr "\t-Lenta \n"
+
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Savienoties ar Internetu"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remember this password"
+msgstr "Atcerieties šo paroli"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Savienoties ar Internetu"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Internet savienojuma koplietošana tagad ir ieslēgta."
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Izmēģinu savienojumu..."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Tīkls ar SSH.\n"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logs"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
 msgstr ""
+"Vēlamais printeris netika noteikts automātiski, vienkārši izvēlieties to no "
+"saraksta un tad pievienojiet lietotāja vārdu, paroli un darbagrupu, ja "
+"nepieciešams."
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Savienojuma tips: "
-
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Receiving Speed:"
-msgstr ""
+msgid "Use the free space on the Windows partition"
+msgstr "Izmantot Windows sadaļas brīvo vietu"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Nosūtu failus..."
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s atrasts uz %s, konfigurēt to?"
 
-#: ../../standalone/net_monitor:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Statistics"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profils: "
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Tīkla konfigurācija"
-
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Pieejamie printeri"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 draiveris: %s\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Name/IP address of host:"
+msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+"\n"
+"                      DrakBackup Report \n"
+"\n"
 msgstr ""
+"\n"
+"                      DrakBackup ziņojums \n"
+"\n"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Izvēlieties skeneri"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Izvēlieties pakotnes, ko vēlaties instalēt"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Lūdzu, ievadiet osta vārdu vai IP."
+#: ../../lang.pm:1
+#, c-format
+msgid "Papua New Guinea"
+msgstr "Papua Jaungvineja"
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
+msgid "Serbian (cyrillic)"
+msgstr "Serbu (kirilica)"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Pieejamie printeri"
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
+msgstr "Izveidot kodola paziņojumus klusus pēc noklusēšanas"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(pie šī datora)"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+"Vai vēlaties norādīt printeri (\"%s\")\n"
+"kā noklusēto printeri?"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr " Noņemt atzīmētos"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP end range"
+msgstr "DHCP beigu diapazons"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "atklāts %s"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "Gatavoju sāknēšanas disketi"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Add host"
-msgstr "Pievienot lietotāju"
+msgid "Wait please, testing your connection..."
+msgstr "Izmēģinu savienojumu..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Izmantot brīvo vietu"
+msgid "Bringing down the network"
+msgstr "Atslēdzu tīklu"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(pie šī datora)"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Lietotāja ID"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
+"NFS ir populārs protokols failu koplietošanai TCP/IP tīklos.\n"
+"Šis serviss nodrošina NFS failu aizslēgšanas funkcionalitāti."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP klients"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Failu koplietošana"
+msgid "dismiss"
+msgstr "atmest"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Printing/Scanning on \"%s\""
+msgstr "Drukāšana/skenēšana uz \"%s\""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
+msgid "omit raid modules"
+msgstr "izlaist raid moduļus"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
 msgstr ""
+"lpd ir drukas demons, kas ir nepieciešams lpr pareizai darbībai. Tas ir\n"
+"serveris, kas nosūta drukas uzdevumus printeri(e)m."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Pieejamie printeri"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Pieejamie printeri"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Failu koplietošana"
+msgid "Internet Connection Configuration"
+msgstr "Interneta savienojuma konfigurācija"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add a scanner manually"
-msgstr "Izvēlēties lietotāju manuāli"
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "comma separated numbers"
+msgstr "ar komatu atdalīti skaitļi"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Pieejamie printeri"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Netika atrasti printeri, kas tieši pieslēgti Jūsu datoram"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Pacelt izvēlēto noteikumu par vienu līmeni"
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
@@ -17422,348 +17507,303 @@ msgstr ""
 "\n"
 "Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Vai tiešām vēlaties noņemt printeri \"%s\"?"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "I can't find any room for installing"
+msgstr "Nevaru atrast vietu instalēšanai"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Default printer"
+msgstr "Noklusētais printeris"
+
+#: ../../network/netconnect.pm:1
+#, c-format
 msgid ""
-"The following scanners\n"
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
 "\n"
-"%s\n"
-"are available on your system.\n"
 msgstr ""
+"Jūs esat konfigurējuši vairākus veidus, kā savienoties ar Internet.\n"
+"Izvēlieties vienu, kuru vēlaties lietot.\n"
 "\n"
-"Jūsu sistēmai ir tieši pievienots viens nezināms printeris"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Jūsu %s skeneris ir nokonfigurēts.\n"
-"Jūs tagad varat skenēt dokumentus, izmantojot ``XSane'' no Multimēdiji/"
-"Grafika aplikāciju izvēlnē."
-
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "choose device"
-msgstr "izvēlieties ierīci"
+msgid "Modify RAID"
+msgstr "Mainīt RAID"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Please select the device where your %s is attached"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
 msgstr ""
-"Scannerdrake nespēja noteikt Jūsu %s skeneri.\n"
-"Lūdzu, izvēlieties iekārtu, kur Jūsu skeneris ir pievienots"
+"Ir atklāta ISDN PCI karte, bet nav zināms kartes tips. Lūdzu izvēlieties "
+"kādu no nākamajā ekrānā uzskaitītajām PCI kartēm."
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Pieejamie printeri"
+#: ../../any.pm:1
+#, c-format
+msgid "Add user"
+msgstr "Pievienot lietotāju"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Automātiska noteikšana"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "RAID diski %s\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Liberia"
+msgstr "Libērija"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakgw:1
+#, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
 msgstr ""
-"Šis %s skeneris jākonfigurē ar printerdrake.\n"
-"Jūs varat palaist printerdrake no Mandrake kontroles centra Aparatūras "
-"sekcijā."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is unsupported"
-msgstr "Šis %s skeneris netiek atbalstīts"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Šī Mandrake Linux versija neatbalsta %s."
+#: ../../steps.pm:1
+#, c-format
+msgid "Choose your keyboard"
+msgstr "Tastatūras izvēle"
 
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Šī Mandrake Linux versija neatbalsta %s."
+msgid "Format partitions"
+msgstr "Diska formatēšana"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Ports"
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automātiska CUPS konfigurēšana"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ", "
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Atklātais modelis: %s %s"
+msgid "Running \"%s\" ..."
+msgstr "Izpildu \"%s\" ..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid " ("
-msgstr ""
+msgid "enable radio support"
+msgstr "ieslēgt radio atbalstu"
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Izvēlieties skeneri"
+msgid "Scanner sharing to hosts: "
+msgstr "Failu koplietošana"
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s nav atrodams skeneru datubāzē, vai konfigurēt manuāli?"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s atrasts uz %s, konfigurēt to?"
+msgid "Loopback file name: %s"
+msgstr "Loopback faila nosaukums: %s"
 
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Notiek noteikšana"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Lūdzu norādiet portu, kuram ir pievienots printeris."
 
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Some devices were added:\n"
-msgstr "Tika pievienotas dažas iekārtas:\n"
+msgid "Do not transfer printers"
+msgstr "Nepārcelt printerus"
 
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Dažas iekārtas no \"%s\" aparatūras klases tika izņemtas:\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Pauze pirms noklusētās sistēmas ielādes"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
 
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Esiet sveicināti atvērtā koda pasaulē"
-
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Paldies, ka izvēlējāties Mandrake Linux 9.1"
+msgid "Please check for multisession CD"
+msgstr "Lūdzu atzīmējiet, ja lietojat daudzu sesiju CD"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Lai dalītos ar pieredzi un palīdzētu veidot Linux rīkus, pievienojieties "
-"diskusiju forumiem, kurus varat atrast \"Kopienas\" web lapās."
+msgid "user"
+msgstr "lietotājs"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"Gribat uzzināt vairāk par Atvērtā Koda kopienu? Iesaistieties Brīvās "
-"Programmatūras pasaulē!"
+msgid "Use Hard Disk to backup"
+msgstr "Dublēšanai lietot cieto disku"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
 #, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Configure"
+msgstr "Konfigurēt"
 
-#: ../../share/advertising/03-software.pl:1
-#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 ļauj Jums lietot pašu pēdējo programmnodrošinājumu, lai "
-"atskaņotu audio failus, rediģētu un uzturētu attēlus jeb fotogrāfijas, un "
-"apskatītu video"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Izvēlieties skeneri"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
 msgstr ""
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Backup Users"
+msgstr "Dublēt lietotājus"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrake termināļu servera konfigurācija"
-
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Mandrake Linux 9.1 nodrošina Jūs ar 11 lietotāja saskarnēm, kas var tikt "
-"pilnībā izmainītas: KDE 3, Gnome 2, WindowMaker, ..."
-
-#: ../../share/advertising/05-desktop.pl:1
-#, c-format
-msgid "A customizable environment"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
+"Lūdzu ievadiet resursa vārdu.\n"
+"Resursa vārdam ir jābūt pilnam kvalificētam resursa vārdam,\n"
+"piemēram, ``mybox.mylab.myco.com''.\n"
+"Jūs varat ievadīt arī vārtejas IP adresi, ja tāda ir"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
-msgstr ""
+msgid "Select Printer Spooler"
+msgstr "Izvēlieties printera spolētāju"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 ir maksimāla izstrādāšanas platforma"
+msgid "Create new theme"
+msgstr "Izveidot jaunu tēmu"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Pārveidojiet Jūsu datoru par spēcīgu Linux serveri ar dažiem peles "
-"klikšķiem. Web serveris, pasta serveris, ugunsmūris, maršrutētājs, failu un "
-"printeru serveris, ..."
+msgid "Mandrake Tools Explanation"
+msgstr "Mandrake rīku apraksti"
 
-#: ../../share/advertising/07-server.pl:1
-#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Pārvērtiet Jūsu datoru par drošu serveri"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Printeris nav atrasts!"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
+"Dažas svarīgas pakotnes neizdevās pareizi instalēt.\n"
+"Ir bojāta jūsu kompaktdisku iekārta vai instalācijas disks.\n"
+"Parbaudiet disku uz instalēta datora, izmantojot komandu \"rpm -qpl Mandrake/"
+"RPMS/*.rpm\"\n"
 
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Oficiālais MandrakeSoft veikals"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Atklātais modelis: %s %s"
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
-
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+msgid "if set to yes, run the daily security checks."
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimizēt drošību"
-
-#: ../../share/advertising/11-mnf.pl:1
-#, fuzzy, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Šis produkts ir pieejams MandrakeStore Web vietā"
+msgid "Azerbaijan"
+msgstr "Azerbaidžāna"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "Lenta nav ievietota %s!"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvoraka (US)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr ""
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Atrodiet risinājumus Jūsu problēmām caur MandrakeSoft tiešsaistes atbalsta "
-"platformu"
+msgid "How is the printer connected?"
+msgstr "Kā šis printeris ir pievienots?"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Kļūstiet par MandrakeEkspertu"
+msgid "Security level"
+msgstr "Drošības līmenis"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Visiem incidentiem sekos viens kvalificēts MandrakeSoft tehniskais eksperts."
+msgid "final resolution"
+msgstr "galējā izšķirtspēja"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Tiešsaistes platforma, lai atbildētu uz kompānijas specifiskām atbalsta "
-"vajadzībām."
+msgid "Services"
+msgstr "Servisi"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
 
 #
 #: ../../share/compssUsers:999
@@ -17780,11 +17820,6 @@ msgstr ""
 
 #
 #: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Darbastacija"
-
-#
-#: ../../share/compssUsers:999
 msgid "Game station"
 msgstr "Spēļu dators"
 
@@ -17860,10 +17895,6 @@ msgstr ""
 "K Desktop Environment, galvenā grafiskā vide kopā ar papildus rīku kolekciju"
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafiskā vide"
-
-#: ../../share/compssUsers:999
 msgid "Gnome Workstation"
 msgstr "Gnome darbastacija"
 
@@ -17883,11 +17914,6 @@ msgstr "Citas grafiskās darbavirsmas"
 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr "Icewm, Window Maker, Enlightenment, Fvwm u.c."
 
-#
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Izstrāde"
-
 #: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr "C un C++ izstrādes bibliotēkas, programmas un include faili"
@@ -17960,45 +17986,109 @@ msgstr "Tīkla datoru serveris"
 msgid "NFS server, SMB server, Proxy server, ssh server"
 msgstr "NFS serveris, SMB serveris, Proxy serveris, ssh serveris"
 
-#
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Multimēdiju dators"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Rīku komplekts, lai lasītu un sūtītu pastu vai jaunumus (pine, mutt, tin..) "
+"un pārlūkotu Tīmekli"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Interneta savienojums un konfigurācija"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Konfigurēt savienojumu"
+
+#~ msgid "Disconnect"
+#~ msgstr "Atvienot"
+
+#~ msgid "Connect"
+#~ msgstr "Savienot"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Varat pārkonfigurēt savienojumu."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Varat pievienoties Internetam vai pārkonfigurēts savienojumu."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Pašlaik jūs neesat pievienojies Internetam."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Varat atvienoties vai pārkonfigurēt savienojumu."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Pašlaik jūs esat pievienojies Internetam."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "failu sūtīšana pa FTP"
+
+#~ msgid "Use incremental backup  (do not replace old backups)"
+#~ msgstr "Lietot pieaugošu dublēšanu (neaizvietot iepriekšējās dublēšanas)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Izpildiet atkārtoti 'lilo'"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Skaņas un video atskaņošanas/rediģēšanas programmas"
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Rakstīt %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopēt no %s uz %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Dublēt %s uz %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ttf fontu konvertēšana"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Fontu konvertēšana"
+
+#~ msgid "Author:"
+#~ msgstr "Autors:"
 
 #
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Spēļu dators"
+#~ msgid "Audio station"
+#~ msgstr "Multimēdiju dators"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video playing programs"
-msgstr "Skaņas un video atskaņošanas/rediģēšanas programmas"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Skaņas un video atskaņošanas/rediģēšanas programmas"
 
 #
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Spēļu dators"
+#~ msgid "Video station"
+#~ msgstr "Spēļu dators"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "Grafiskās programmas, piemēram, The Gimp"
+#~ msgid "Video playing programs"
+#~ msgstr "Skaņas un video atskaņošanas/rediģēšanas programmas"
 
-#: ../../share/compssUsers:999
+#
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Rīku komplekts, lai lasītu un sūtītu pastu vai jaunumus (pine, mutt, tin..) "
-"un pārlūkotu Tīmekli"
+#~ msgid "Graphic station"
+#~ msgstr "Spēļu dators"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Grafiskās programmas, piemēram, The Gimp"
 
 #, fuzzy
 #~ msgid "Printer sharing"
@@ -18225,9 +18315,6 @@ msgstr ""
 #~ "Vai nu jūs izmantojat LILO, un tas nestrādās, vai arī jūs neizmantojat "
 #~ "LILO, un /boot jums nav vajadzīgs"
 
-#~ msgid "Upgrade"
-#~ msgstr "Atjaunināt"
-
 #~ msgid "Do you want to configure another printer?"
 #~ msgstr "Vai vēlaties konfigurēt vēl kādu printeri?"