updated pot file

1 files changed, 11068 insertions, 11006 deletions

diff --git a/perl-install/share/po/is.po b/perl-install/share/po/is.po
index 08b9f4c52..be2ac0bd8 100644
--- a/perl-install/share/po/is.po
+++ b/perl-install/share/po/is.po
@@ -10,7 +10,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-is\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: 2003-03-10 10:18GMT\n"
 "Last-Translator: Pjetur G. Hjaltason <pjetur@pjetur.net>\n"
 "Language-Team: Icelandic <kde-isl@molar.is>\n"
@@ -19,948 +19,1489 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.0\n"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Leita á disksneiðum að tengipunktum"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "netgátt prentara"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Settu diskling í drif:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
 msgstr ""
+"Disksneiðin sem var tekin sem afrit er ekki af sömu stærð\n"
+"Halda áfram?"
 
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Cancel"
-msgstr "Hætta við"
+msgid "Which username"
+msgstr "hvaða notandanafn"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Launch userdrake"
-msgstr "Ræsa userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Hverju viltu bæta við?"
 
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Endurheimta sneiðatöflunna"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Á CUPS þjóni \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Lokauppsetning"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Nota ``%s'' í staðinn"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tegund"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
 "\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Vantar nauðsynlegan pakka %s"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
 msgstr ""
+"Eftirfarandi prentarar\n"
+"\n"
+"%s%s\n"
+"eru tengdir beint við tölvuna þína"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakkinn %s þarfnast innsetningar, viltu setja hann inn?"
+msgid "Central African Republic"
+msgstr "Miðafríkulýðveldið"
 
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Custom"
-msgstr "Sérsniðið"
+msgid "Gateway device"
+msgstr "Gátt (tækið)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Allow all users"
-msgstr "Leyfa öllum notendum"
+msgid "Net Method:"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "No sharing"
-msgstr "Engin miðlun"
+msgid "Ethernetcard"
+msgstr "Netkort"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "More"
-msgstr "Meira"
+msgid "Parameters"
+msgstr "Viðföng"
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hér er listi af mögulegum löndum"
+msgid "Auto-detect"
+msgstr "Finna sjálfkrafa"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please choose your country."
-msgstr "Veldu þér land,"
+msgid "Interface:"
+msgstr "Tengi:"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Veldu innsetningarflokk"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Country"
-msgstr "Land"
+msgid "on CDROM"
+msgstr "á geisladisk"
 
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "All languages"
-msgstr "Öll tungumál"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Kerfið virðist ekki vera tengt við Internetið.\n"
+"reyndu að endurstilla tenginguna."
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use Unicode by default"
-msgstr "Sjálfgefið að nota Unicode"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Hvítarússland"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Villa við að skrifa í skrána %s"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose a language to use."
-msgstr "Vinsamlega veldu land til að nota."
+msgid "Use tape to backup"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Choose the window manager to run:"
-msgstr "Veldu gluggastjórann sem þú vilt nota:"
+msgid "The following packages are going to be installed"
+msgstr "Eftirfarandi pakkar verða settir inn"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the default user:"
-msgstr "Veldu sjálfgefinn notanda:"
+msgid "CUPS configuration"
+msgstr "CUPS uppsetning"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you want to use this feature?"
-msgstr "Viltu nota þennan fídus?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Ég get stillt tölvuna þína til að stimpla sjálfkrafa inn einn notanda."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Ekki nóg laust pláss til að búa til nýjar disksneiðar"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Autologin"
-msgstr "Autologin"
+msgid "Moving"
+msgstr "Færi"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Icon"
-msgstr "Táknmynd"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Shell"
-msgstr "Skel"
+msgid "("
+msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Password (again)"
-msgstr "Lykilorð (aftur)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "Password"
-msgstr "Lykilorð"
+msgid ")"
+msgstr ""
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "User name"
-msgstr "Notandanafn"
+msgid "Lebanon"
+msgstr "Líbanon"
 
-#: ../../any.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Real name"
-msgstr "Nafn notanda"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Accept user"
-msgstr "Samþykkja notanda"
+msgid "Stop"
+msgstr "Stöðva"
 
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Done"
-msgstr "Búið"
+msgid "Edit selected host"
+msgstr "Breyta valinni vél"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sláðu inn notanda\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "Ekkert CD tæki valið!"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Add user"
-msgstr "Bæta við notanda"
+msgid "Bulgarian (phonetic)"
+msgstr "Búlgarskt (hljóðfræðilegt)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "This user name has already been added"
-msgstr "Þetta notandanafn er nú þegar til"
+msgid "The DHCP start ip"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "The user name is too long"
-msgstr "Þetta notandanafn er of langt"
+msgid "256 kB"
+msgstr "256 kB"
 
 #: ../../any.pm:1
 #, c-format
+msgid "Bootloader main options"
+msgstr "Aðalvalmöguleikar ræsiforrits"
+
+#: ../../standalone.pm:1
+#, c-format
 msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Notandanafnið má bara innihalda litla stafi, tölustafi, `-' og `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Please give a user name"
-msgstr "Vinsamlega sláðu inn notandanafn"
+msgid "Tape"
+msgstr "Segulband"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This password is too simple"
-msgstr "Þetta lykilorð er of einfalt"
+msgid "Scanning network..."
+msgstr "Leita á neti..."
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please try again"
-msgstr "Reyndu aftur"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The passwords do not match"
-msgstr "Mismunandi lykilorð"
+msgid "Malaysia"
+msgstr "Malasía"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "(already added %s)"
-msgstr "(%s er nú þegar til)"
+msgid "Swiss (French layout)"
+msgstr "Svissneskt (frönsk uppsetn.)"
 
-#: ../../any.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "access to compilation tools"
-msgstr "aðgengi að þróunartólum"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid mistókst (kannski vantar raidtólin?)"
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "access to network tools"
-msgstr "aðgengi að nettólum"
+msgid "Webcam"
+msgstr "Vefmyndavél"
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Stærð á (annars þreps) skyndiminni örgjörva"
+
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "access to administrative files"
-msgstr "aðgengi að stýrikerfisskrám"
+msgid "Soundcard"
+msgstr "Hljóðkort"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "allow \"su\""
-msgstr "leyfa \"su\""
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "access to rpm tools"
-msgstr "aðgengi að rpm tólum"
+msgid "Level %s\n"
+msgstr "Stig %s\n"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "access to X programs"
-msgstr "aðgengi að X forritum"
+msgid "Luxembourg"
+msgstr "Lúxemborg"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+"                      DrakBackup Daemon Report\n"
+"\n"
+"\n"
 msgstr ""
-"Hérna eru núverandi stillingar á ræsivalmynd .\n"
-"Þú getur bætt við fleirum eða breytt þessum."
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Other OS (windows...)"
-msgstr "Öðru stýrikerfi (Windows...)"
+msgid "Iran"
+msgstr "Íran"
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Öðru stýrikerfi (MacOS...)"
+msgid "Bus"
+msgstr "Braut"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Öðru stýrikerfi (SunOS...)"
+msgid "Iraq"
+msgstr "Írak"
 
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Hverju viltu bæta við?"
+msgid "Configuring..."
+msgstr "Uppsetning..."
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "This label is already used"
-msgstr "Þetta nafn er nú þegar í notkun."
+msgid "The setup has already been done, and it's currently enabled."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "You must specify a root partition"
-msgstr "Þú verður að hafa disksneið fyrir rótina"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"GNU/Linux 'bttv' einingin finnur sjálfkrafa uppsetningu á flestum nútíma "
+"sjónvarpskortum.\n"
+"Ef kortið þitt er ekki sett rétt upp þá getur þú stillt móttakarann og "
+"korttegundir hér. Veldu viðföng fyrir kortið þitt ef þess er þörf."
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You must specify a kernel image"
-msgstr "Þú verður að skilgreina ræsikjarna"
+msgid "Password (again)"
+msgstr "Lykilorð (aftur)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Empty label not allowed"
-msgstr "Autt er ekki leyft"
+msgid "Search installed fonts"
+msgstr ""
 
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Default"
-msgstr "Sjálfgefið"
+msgid "Venezuela"
+msgstr "Venesúela"
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "IP address"
+msgstr "IP vistfang:"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Initrd-size"
-msgstr "Initrd-stærð"
+msgid "Choose the sizes"
+msgstr "Veldu stærðir"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Append"
-msgstr "Bæta aftan við"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Listi af skemmdum gögnum:\n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Label"
-msgstr "Nafn"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Mótaldið þitt er ekki stutt af kerfinu.\n"
+"Líttu á http://www.linmodems.org"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Unsafe"
-msgstr "Óöruggt"
+msgid "Choose another partition"
+msgstr "Veldu aðra disksneið"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Table"
-msgstr "Tafla"
+msgid "Current user"
+msgstr "Núverandi notandi"
 
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Root"
-msgstr "Rót"
+msgid "Username"
+msgstr "Notandanafn"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Read-write"
-msgstr "Les-skrif"
+msgid "Left \"Windows\" key"
+msgstr "Vinstri \"Windows\" lykill"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "dhcpd miðlara uppsetning"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Video mode"
-msgstr "Skjáhamur"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Image"
-msgstr "Ræsikjarna"
+msgid "Guyana"
+msgstr "Gvíana"
 
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Default OS?"
-msgstr "Sjálfgefið stýrikerfi?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " á Novell miðlara \"%s\", prentari \"%s\""
 
-#: ../../any.pm:1
+# ## skrytid
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Enable OF Boot?"
-msgstr "Virkja OF ræsingu?"
+msgid "Remove a module"
+msgstr "Fjarlægja einingu"
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Enable CD Boot?"
-msgstr "Virkja CD ræsingu?"
+msgid "Password"
+msgstr "Lykilorð"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Kjarna ræsibið:"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Open Firmware Delay"
+msgid "Advanced Configuration"
+msgstr "Ítarlegri uppsetning"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning on your HP multi-function device"
 msgstr ""
 
 #: ../../any.pm:1
 #, c-format
-msgid "Boot device"
-msgstr "Ræsitæki"
+msgid "Root"
+msgstr "Rót"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Init Message"
-msgstr "Init skilaboð"
+msgid "Choose an existing RAID to add to"
+msgstr "Veldu RAID sem til er fyrir til að bæta við"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bootloader to use"
-msgstr "Ræsiforrit sem á að nota"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Tyrkneskt (nútíma \"Q\" módel)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Bootloader main options"
-msgstr "Aðalvalmöguleikar ræsiforrits"
+msgid "Lilo message not found"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
 msgstr ""
-"Valkosturinn ``Takmarka alla rofa á skipanalínu'' gerir ekkert án lykilorðs"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Give the ram size in MB"
-msgstr "Sláðu inn vinnsluminni í MB"
+msgid "if needed"
+msgstr "ef þörf"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Enable multiple profiles"
-msgstr "Virkja mörg snið"
+msgid "Restore Failed..."
+msgstr "Endurheimting mistókst..."
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Nákvæm stærð vinnsluminnis (fann %d MB)"
+msgid "/Autodetect _jazz drives"
+msgstr "/Finna _jazz drif sjálfkrafa"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Hreinsa /tmp við hverja ræsingu"
+msgid ""
+"Description:\n"
+"\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
+"\n"
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
+"\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
+"\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "Create a bootdisk"
-msgstr "Búa til ræsidiskling"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "restrict"
-msgstr "takmarka"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"x hnit framvindusúlu\n"
+"á efra vinstra horni"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Restrict command line options"
-msgstr "Takmarka alla rofa á skipanlínu"
+msgid "Current interface configuration"
+msgstr "Núverandi uppsetningar tengis"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Ef þú ert með ISA kort þá ættu gildin á næsta skjá að vera rétt.\n"
+"\n"
+"Ef þú hefur PCMCIA kort, þá þarft þú að vita \"irq\" og \"io\" kortsins.\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not print any test page"
+msgstr "Prenta ekki út prufublaðsíðu(r)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
 
 #: ../../any.pm:1
 #, c-format
 msgid "Force No APIC"
 msgstr "Þvinga engan APIC"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Enable ACPI"
-msgstr "Virkja ACPI"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"
 
-#: ../../any.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Delay before booting default image"
-msgstr "Töf áður en sjálfgefin ræsing byrjar"
+msgid "[keyboard]"
+msgstr "[Lyklaborð]"
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "compact"
-msgstr "samþjappað"
+msgid "FTP proxy"
+msgstr "FTP Sel:"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Compact"
-msgstr "Samþjappað"
+msgid "Install List"
+msgstr "Setja inn lista"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bootloader installation"
-msgstr "Uppsetning ræsistjóra"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Breyta\n"
+"Slóð endurheimtu"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "First sector of boot partition"
-msgstr "Á fyrsta geira ræsidisksneiðar"
+msgid "Show only for the selected day"
+msgstr "Sýna aðeins fyrir valinn dag"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Í ræsifærsluna (MBR)"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvert viltu setja ræsistjórann?"
+msgid "512 kB"
+msgstr "512 kB"
 
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub uppsetning"
+msgid "Logs"
+msgstr "Annálar"
 
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "SILO Installation"
-msgstr "SILO uppsetning"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Athugið: Ekki er hægt að leita að hliðtengjum)"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Skip"
-msgstr "Sleppa"
+msgid "<control>N"
+msgstr "<control>N"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "On Floppy"
-msgstr "Á diskling"
+msgid "What kind of card do you have?"
+msgstr "Hvernig kort ertu með?"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "First sector of the root partition"
-msgstr "Á fyrsta geira ræsidisksneiðar"
+msgid "<control>O"
+msgstr "<control>O"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Öryggi"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Creating bootdisk..."
-msgstr "Bý til ræsidiskling..."
+msgid "<control>Q"
+msgstr "<Ctrl>Q"
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Insert a floppy in %s"
-msgstr "Settu tóman diskling í drif %s"
+msgid "Unknown"
+msgstr "Óþekkt"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Veldu disklingadrifið sem þú vilt nota til að gera ræsidisk"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Second floppy drive"
-msgstr "Annað drif"
+msgid "Network Configuration"
+msgstr "Netstillingar"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "First floppy drive"
-msgstr "Fyrsta drif"
+msgid "<control>S"
+msgstr "<control>S"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Ekkert disklingadrif til staðar"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr "Samskiptaregla til tengingar við umheiminn"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "Valkostur %s verður að vera tala!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Tilkynning"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
 msgstr ""
-"Sérsmíðaður ræsidisklingur gerir þér kleyft að ræsa Linux án þess að nota "
-"ræsistjóra\n"
-" eins og LILO. Þetta kemur að gagni ef þú vilt ekki setja upp LILO á vélinni "
-"eða ef\n"
-" annað stýrikerfi hefur fjarlægt LILO eða LILO virkar ekki með þínum "
-"vélbúnaðarstillingum.\n"
-" Ræsidiskling má einnig nota með Mandrake Linux 'rescue' disklingnum svo "
-"hægt sé að bjarja\n"
-" vélinni ef alvarleg vandamál koma upp.\n"
-"Viltu búa til ræsidiskling fyrir vélina þína?\n"
-"%s"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Þú hefur ekki sett upp X, ertu viss um að þú viljir þetta?"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Hvaða tegund af disksneiðingu?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr ""
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Tengi"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"Options Description:\n"
 "\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
 "\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 msgstr ""
-"Sérsmíðaður ræsidisklingur gerir þér kleyft að ræsa Linux án þess að nota "
-"ræsistjóra\n"
-" eins og SLILO. Þetta kemur að gagni ef þú vilt ekki setja upp SLILO á "
-"vélinni eða ef\n"
-" annað stýrikerfi hefur fjarlægt SLILO eða SLILO virkar ekki með þínum "
-"vélbúnaðarstillingum.\n"
-" Ræsidiskling má einnig nota með Mandrake Linux 'rescue' disklingnum svo "
-"hægt sé að bjarja\n"
-" vélinni ef alvarleg vandamál koma upp.\n"
-"Viltu búa til ræsidiskling fyrir vélina þína?"
 
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Þú getur ekki sett ræsistjórann á %s disksneiðina\n"
+msgid "comma separated strings"
+msgstr "strengir aðskildir með kommu"
 
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "not enough room in /boot"
-msgstr "ekki nægilegt pláss í /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Þetta eru vélarnar frá hverjum ætti að vera hægt að nota myndskanna:"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Upplýst val verður ræst sjálfkrafa eftir %d sekúndur."
+msgid "Messages"
+msgstr "Skilaboð"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "skipanir fyrir ræsingu eða 'c' fyrir skipanalínu."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Óþekkt|CPH06X (bt878) [margir framleiðendur]"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Ýttu á Enter til að ræsa valið stýrikerfi, eða 'e' til að breyta"
+msgid "POP and IMAP Server"
+msgstr "POP og IMAP þjónn"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Notaðu %c og %c lyklana til að velja hvaða færsla er upplýst."
+msgid "Mexico"
+msgstr "Mexíkó"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkomin að GRUB kerfisvalinu!"
+msgid "Model stepping"
+msgstr "tegundar-stig"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rúanda"
 
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Eru einhver %s tengi í tölvunni?"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with text menu"
-msgstr "LILO með textavalmynd"
+msgid "Switzerland"
+msgstr "Sviss"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO með grafískri valmynd"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
 
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Viðföng fyrir fjartengda lpd prentara"
 
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
 "\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
-"Velkomin(n) i %s styrikerfis-raesistjorann!\n"
-"\n"
-"Sladu a <TAB> til ad fa lista yfir mogulega valkosti.\n"
-"\n"
-"Til raesa einn af theim, sladu inn nafnid og sidan a <ENTER>\n"
-"eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
-"\n"
 
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper vantar"
+msgid "Configure Internet Access..."
+msgstr "Stilla Internet aðgengi..."
 
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "kdesu missing"
-msgstr "kdesu vantar"
+msgid "Norway"
+msgstr "Noregur"
 
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Skjámyndir verða tiltækar eftir uppsetningu í %s"
+msgid "Danish"
+msgstr "Danskt"
 
-#: ../../common.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Get ekki tekið skjámyndir fyrr en disksneiðar hafa verið skilgreindar"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr "Setja sjálfkrafa á NumLock í skjáhermi og við ræsingu"
 
-#: ../../common.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "%d seconds"
-msgstr "%d sekúndur"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Sláðu inn IP uppsetningu þessarar vélar. Hver færsla\n"
+"á að vera IP tala rituð með punkt á milli.\n"
+"(dæmi 1.2.3.4)"
 
-#: ../../common.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "1 minute"
-msgstr "1 mínútu"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
 
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "%d minutes"
-msgstr "%d mínútur"
+msgid "Processors"
+msgstr "Örgjörvar"
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Búlgaría"
 
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr "Ekkert NIC valið!"
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbarði og Jan Mayen"
 
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "KB"
-msgstr "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "United States"
-msgstr "Bandaríkin"
+msgid "partition %s is now known as %s"
+msgstr "disksneið %s er þekkt sem %s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Austria"
-msgstr "Austurríki"
+msgid "Backup Other files..."
+msgstr "Afrita aðrar skrár..."
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Italy"
-msgstr "Ítalía"
+msgid "SMB server IP"
+msgstr "Vistfang SMB þjóns"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Netherlands"
-msgstr "Holland"
+msgid "Congo (Kinshasa)"
+msgstr "Kongó (Kinshasa)"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sweden"
-msgstr "Svíþjóð"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Disksneiðatafla drifs %s mun verða skrifuð á disk!"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Norway"
-msgstr "Noregur"
+msgid "Installing HPOJ package..."
+msgstr "Set inn HPOJ pakka..."
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Greece"
-msgstr "Grikkland"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Sérsmíðaður ræsidisklingur gerir þér kleyft að ræsa Linux án þess að nota "
+"ræsistjóra\n"
+" eins og LILO. Þetta kemur að gagni ef þú vilt ekki setja upp LILO á vélinni "
+"eða ef\n"
+" annað stýrikerfi hefur fjarlægt LILO eða LILO virkar ekki með þínum "
+"vélbúnaðarstillingum.\n"
+" Ræsidiskling má einnig nota með Mandrake Linux 'rescue' disklingnum svo "
+"hægt sé að bjarja\n"
+" vélinni ef alvarleg vandamál koma upp.\n"
+"Viltu búa til ræsidiskling fyrir vélina þína?\n"
+"%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Germany"
-msgstr "Þýskaland"
+msgid ", USB printer \\#%s"
+msgstr ", USB prentari \\#%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Czech Republic"
-msgstr "Tékkland"
+msgid "Latvian"
+msgstr "Lettneska"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Belgium"
-msgstr "Belgía"
+msgid "monthly"
+msgstr "mánaðarlega"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "France"
-msgstr "Frakkland"
+msgid "Module name"
+msgstr "Kjarnaeining"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Costa Rica"
-msgstr "Kosta Ríka"
+msgid "Start at boot"
+msgstr "Ræsa við kerfisræsingu"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Villa við að opna %s til skriftar: %s"
+msgid "Use Incremental Backups"
+msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Nothing to do"
-msgstr "Ekkert að gera"
+msgid "First sector of drive (MBR)"
+msgstr "Í ræsifærsluna (MBR)"
 
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ekki nægilegt pláss til sjálfvirkrar úthlutunar"
+msgid "Joystick"
+msgstr "Gleðigandur"
 
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Þú getur ekki notað dulritað skráarkerfi á tengipunkt %s"
+msgid "El Salvador"
+msgstr "El Salvador"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Þú þarft raunverulegt skráarkerfi (ext2/ext3, reiserfs, xfs, eða jfs) fyrir "
-"þennan tengipunkt\n"
+msgid "Use Unicode by default"
+msgstr "Sjálfgefið að nota Unicode"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Þessi mappa ætti að vera í rótarskráarkerfinu"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "eining GNU/LInux kjarnans sem meðhöndlar tækið"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Þú gtur ekki notað LVM sýndardisk fyrir tengipunkt %s"
+msgid "Trying to rescue partition table"
+msgstr "Reyni að endurheimta disksneiðatöfluna"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "Valkostur %s verður að vera heiltala!"
+
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
 msgstr ""
-"Þú hefur valið að nota RAID hugbúnað til að stjórna rótarsneið (/).\\ Enginn "
-"ræsistjóri ræður við þetta án sérstakrar /boot sneiðar.\n"
-"Vinsamlega passaðu uppá að bæta við sneið fyrir /boot"
+"Svæði sem þú verður að fylla:\n"
+"%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Það er þegar disksneið með tengipunktinn %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Get ekki ræst uppfærslu yfir net!!!\n"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Heiti tengipunkta eiga aðeins að innihalda bókstafi og tölur"
+msgid "Name: "
+msgstr "Nafn: "
 
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Heiti tengipunkta verða að byrja á /."
+msgid "16 million colors (24 bits)"
+msgstr "16 miljón litir (24 bits)"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Þú getur ekki notað ReiserFs á disksneiðar minni en 32MB"
+msgid "Allow all users"
+msgstr "Leyfa öllum notendum"
 
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Þú getur ekki notað JFS á disksneiðar minni en 16MB"
+msgid "The official MandrakeSoft Store"
+msgstr ""
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Breyta stærð"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Breiðbandstenging"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Notandi"
 
 #: ../../fsedit.pm:1
 #, c-format
@@ -981,749 +1522,237 @@ msgstr ""
 "\n"
 "Viltu eyða öllum þessum disksneiðum?\n"
 
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error"
-msgstr "Villa"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "server"
-msgstr "netþjónn"
+msgid "Printer on parallel port \\#%s"
+msgstr "Prentari á raðtengi - port \\#%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "with /usr"
-msgstr "með /usr"
+msgid "Name"
+msgstr "Nafn"
 
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "simple"
-msgstr "einfalt"
+msgid "mkraid failed"
+msgstr "mkraid mistókst"
 
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Enabling swap partition %s"
-msgstr "Virkja diskminni á disksneið %s"
+msgid "Button 3 Emulation"
+msgstr "Herma eftir miðhnappi"
 
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "error unmounting %s: %s"
-msgstr "villa við að aftengja %s: %s"
+msgid "Sending files..."
+msgstr "Sendi skrár..."
 
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "tenging disksneiðar %s í möppu %s mistókst"
+msgid "Israeli (Phonetic)"
+msgstr "Ísraelískt (hljóðfr.)"
 
-#: ../../fs.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mounting partition %s"
-msgstr "Tengi disksneið %s"
+msgid "access to rpm tools"
+msgstr "aðgengi að rpm tólum"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Checking %s"
-msgstr "Athuga %s"
+msgid "edit"
+msgstr "sýsl"
 
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Formatting partition %s"
-msgstr "Forsníð disksneið %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Þú verður að velja/gefa upp prentara/prenttæki!"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Creating and formatting file %s"
-msgstr "bý til og forsníð skrá %s"
+msgid "Permission problem accessing CD."
+msgstr ""
 
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "kann ekki að forsníða %s af tegundinni %s"
+msgid "Phone number"
+msgstr "Símanúmer"
 
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s forsniðið á %s mistókst"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Villa: rekillinn \"%s\" er ekki á listanum"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Smelltu á \"Næsta ->\" ef þú vilt eyða öllum gögnum og disksneiðum\n"
-"á þesum harða disk.  Varúð! Eftir að þú hefur smellt á \"Næsta ->\", getur\n"
-"þú ekki endurheimt nein gögn eða disksneiðar sem eru nú á þessum diski,\n"
-"Þar með talin Windows gögn.\n"
-"\n"
-"Smelltu á \"<-Fyrri\" til að stöðva þessa aðgerð án þess að tapa gögnum\n"
-"og disksneiðum sem nú eru á þessum harða diski."
+msgid "Printer name, description, location"
+msgstr "Prentaranafn, lýsing, staðsetning"
 
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
+msgid "USA (broadcast)"
+msgstr "USA (loftnet)"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
+"Please choose the\n"
+"media for backup."
+msgstr "Veldu miðil\\ fyrir afrit."
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+msgid "Use Xinerama extension"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+msgid "Loopback"
+msgstr "Sýndardiskur"
 
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
 msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
+msgid "West Europe"
+msgstr "Vestur Evrópa"
 
-#: ../../help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
 "\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 útgáfa %s"
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
+msgid "Copying %s"
+msgstr "Afrita %s"
 
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "Veldu lit"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "Dominican Republic"
+msgstr "Dóminíska lýðveldið"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Veldu tengið sem þú vilt nota.  Tengið COM1 í MS Windows er kallað\n"
-"ttyS0 í GNU/Linux, COM2 er ttyS1, o.s.frv."
+msgid "Swaziland"
+msgstr "Svasiland"
 
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+msgid "Set-UID"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
+msgid "Please check if you are using CDRW media"
+msgstr "Krossaðu hér við ef þú ert að nota CDRW miðil"
 
 #: ../../help.pm:1
 #, c-format
 msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid " on parallel port \\#%s"
+msgstr " á raðtengi - port \\#%s"
 
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Notaðu %c og %c lyklana til að velja hvaða færsla er upplýst."
 
-#: ../../help.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Almenn 2 hnappa mús"
 
-#: ../../help.pm:1
+#: ../../lvm.pm:1
 #, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Fjarlægðu sýndardrifin fyrst\n"
 
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Upplýst val verður ræst sjálfkrafa eftir %d sekúndur."
 
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Internet aðgengi"
+
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
 msgstr ""
+"y hnit textaglugga\n"
+"í fjölda stafa"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
 msgstr ""
 
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Virkja miðlara..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Prenta út prufublaðsíðu(r)..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Það er þegar disksneið með tengipunktinn %s\n"
+
 #: ../../help.pm:1
 #, c-format
 msgid ""
@@ -1743,218 +1772,159 @@ msgid ""
 "\n"
 "Depending on your hard drive configuration, several options are available:\n"
 "\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
 "\n"
 "   Before choosing this option, please understand that after this\n"
 "procedure, the size of your Microsoft Windows partition will be smaller\n"
 "then when you started. You will have less free space under Microsoft\n"
 "Windows to store your data or to install new software.\n"
 "\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be deleted. !!\n"
 "\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+msgid "Ukraine"
+msgstr "Úkraína"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "Application:"
+msgstr "Forrit:"
 
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "Útvært ISDN mótald"
 
-#: ../../help.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "if set to yes, report check result by mail."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Þitt val? (sjálfgefið %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Vandamálaleit"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
 "\n"
 "\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
 "\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
 "\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
 "\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
 "\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
 "\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
+msgid "daily"
+msgstr "daglega"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
+msgid "and one unknown printer"
+msgstr "og einn óþekktur prentari"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "Írland"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "kjarna útgáfa"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "         Restore Configuration       "
+msgstr "         Endurheimta uppsetningu       "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Er þetta rétt stilling?"
 
 #: ../../help.pm:1
 #, c-format
 msgid ""
 "You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
 "\n"
 "When configuring your network, the available connections options are:\n"
 "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -1969,5735 +1939,5984 @@ msgid ""
 "installed and use the program described there to configure your connection."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Wizard Configuration"
+msgstr "Álfa- uppsetning"
 
-#: ../../help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
+msgid "Autoprobe"
+msgstr "Stilla sjálfvirkt"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
+msgid "Backup system files..."
+msgstr "Afrita kerfisskrár..."
 
-#: ../../help.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Get ekki notað útsendingu án NIS léns"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Fjarlægi prentara \"%s\"..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
 "\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+msgid "information level that can be obtained through the cpuid instruction"
 msgstr ""
 
-#: ../../install2.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You must also format %s"
-msgstr "Þú verður einnig að forsníða %s"
+msgid "Peru"
+msgstr "Perú"
 
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
+msgid " on device: %s"
+msgstr " á tæki: %s"
 
-#: ../../install_any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Það kom upp villa. Engin tæki fundust sem unnt er að búa til ný skráakerfi "
-"á. Vinsamlegast athugaðu vélbúnaðinn í leit að orsök vandamálsins."
+msgid "Remove Windows(TM)"
+msgstr "Fjarlægja Windows(TM)"
 
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Error reading file %s"
-msgstr "Villa við lestur úr skránni %s"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Ræsa X leturþjón (þetta verður að vera til að XFree keyri)"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
 msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Þessi disklingur er ekki FAT forsniðinn"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Settu tóman FAT forsniðinn diskling í drif %s"
+msgid "Madagascar"
+msgstr "Madagaskar"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Get ekki notað útsendingu án NIS léns"
+msgid "Urpmi"
+msgstr "Urpmi"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+msgid "Cron not available yet as non-root"
 msgstr ""
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No"
-msgstr "Nei"
+msgid "System"
+msgstr "Kerfi"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Yes"
-msgstr "Já"
+msgid "Do you want to use this feature?"
+msgstr "Viltu nota þennan fídus?"
 
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Arabic"
+msgstr "Arabískt"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You have selected the following server(s): %s\n"
 "\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+"- Options:\n"
 msgstr ""
+"\n"
+"- Valkostir:\n"
 
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "System configuration"
-msgstr "Kerfisstillingar"
+msgid "Password required"
+msgstr "Lykilorðs er þörf"
 
-#: ../../install_gtk.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "System installation"
-msgstr "Kerfisuppsetning"
+msgid "%d minutes"
+msgstr "%d mínútur"
 
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Bringing down the network"
-msgstr "Keyri niður netið"
+msgid "Graphics card: %s"
+msgstr "Skjákort: %s"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bringing up the network"
-msgstr "Keyri upp netið"
+msgid "WebDAV transfer failed!"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Partitioning failed: %s"
-msgstr "Skipting disks í sneiðar mistókst: %s"
+msgid "XFree configuration"
+msgstr "XFree uppsetning"
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
+msgid "Choose action"
+msgstr "Veldu aðgerð"
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "I can't find any room for installing"
-msgstr "Get ekki fundið meira pláss fyrir uppsetningu"
+msgid "French Polynesia"
+msgstr "Franska Pólínesía"
 
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
 msgstr ""
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Nota fdisk"
-
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Custom disk partitioning"
-msgstr "Sérsniðin disksneiðing"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Stuðningur fyrir OKI 4w og sambærilega Windows prentara."
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Allar disksneiðar og öll gögn á diski %s  tapast"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Þú hefur meir en einn harðan disk. Hvar viltu setja upp Linux?"
+msgid "Installing driver for %s card %s"
+msgstr "Set inn rekil fyrir %s kortið %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Erase entire disk"
-msgstr "Eyða öllu á disknum"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Remove Windows(TM)"
-msgstr "Fjarlægja Windows(TM)"
+msgid "Enable Server"
+msgstr "Virkja þjón"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
+msgid "Ukrainian"
+msgstr "Úkraínskt"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
 msgstr ""
 
-#      ******************************************
-#      *****   Byrjaði hérna 4. jan 2000  *******
-#      ***  ATH: Það er sumt eftir fyrir ofan ***
-#      ******************************************
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Breyting á FAT mistókst: %s"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Settu ræsidiskling í drif %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "Breyta stærð Windows skráarkerfis"
+msgid "Local network(s)"
+msgstr "Staðbundið(n) net"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resizing"
-msgstr "Breyta stærð"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Fjarlægja Windows(TM)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "partition %s"
-msgstr "disksneið %s"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"%s þinn hefur nú verið stilltur\n"
+"Þú geetur nú skannað skjöl með því að velja \"Xsane\" í margmiðlun-grafík "
+"valmyndinni"
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Hvaða stærð viltu skilja eftir fyrir Windows á"
+msgid "Firewire controllers"
+msgstr "Firewire stýringar"
 
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"WARNING!\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
 "\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AÐVÖRUN\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
 "\n"
-"DrakX þarf núna að endurgera Windows sneiðina. Athugið:\n"
-"Þetta getur haft alvarlegar afleiðingar í för með sér.\n"
-"Ef þú ert ekki búin(n) að því, þá ættir þú fyrst að\n"
-"keyra scandisk (og jafnvel líka defrag) á þessa sneið og\n"
-"taka síðan afrit af gögnunum þínum.\n"
-"Sláðu á 'Í lagi' til að halda áfram."
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+msgid "System mode"
 msgstr ""
 
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Búa til nýja disksneið"
-
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
 msgstr ""
+"Til þess að geta prentað á NetWare prentara þarftu að gefa upp NetWare\n"
+"vélarheiti þjónsins (sem er ekki endilega það sama og TCP/IP vélarheitið)\n"
+"ásamt heiti prentaraðar, notandaheiti og lykilorði fyrir\n"
+"prentarann."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Hvaða disksneið viltu breyta stærð á?"
+msgid "Netmask:"
+msgstr "Netsía:"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Nota laust pláss á Windows disksneiðinni"
+msgid "Append"
+msgstr "Bæta aftan við"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Swap partition size in MB: "
-msgstr "Stærð diskminnis í MB: "
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Root partition size in MB: "
-msgstr "Stærð rótardisksneiðar í MB: "
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Choose the sizes"
-msgstr "Veldu stærðir"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvaða disksneið vilt þú nota fyrir Linux4Win?"
+msgid "Network printer \"%s\", port %s"
+msgstr "Netprentari \"%s\", gátt %s"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Use the Windows partition for loopback"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
 msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "There is no existing partition to use"
-msgstr "það eru engar núverandi disksneiðar til að nota"
+msgid "OK to restore the other files."
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use existing partitions"
-msgstr "Nota núverandi disksneiðar"
+msgid "Please choose your keyboard layout."
+msgstr "Hvaða lyklaborðsuppsetningu viltu?"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ekki nóg laust pláss til að búa til nýjar disksneiðar"
+msgid "Printer Device URI"
+msgstr "Slóð að prentara (URI)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use free space"
-msgstr "Nota laust pláss"
+msgid "Not erasable media!"
+msgstr ""
 
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Þú verður að hafa FAT disksneið tengda í /boot/efi"
+msgid "Terminal-based"
+msgstr "Með skjáhermi"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "Installing a printing system in the %s security level"
 msgstr ""
-"Þú hefur ekkert diskminni\n"
-"\n"
-"Halda samt áfram?"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Þú verður að hafa rótarsneið fyrir Linux.  Búðu því annaðhvort\n"
-"til rótarsneið eða veldu sneið sem nú þegar er til á disknum.\n"
-"Veldu síðan ``Tengipunktur'' og sláðu inn `/'"
+msgid "The user name is too long"
+msgstr "Þetta notandanafn er of langt"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
+msgid "Other OS (windows...)"
+msgstr "Öðru stýrikerfi (Windows...)"
 
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+msgid "WebDAV remote site already in sync!"
 msgstr ""
-"Til hamingju! Innsetningu er lokið.\n"
-"Taktu disklinginn eða geisladiskinn úr drifinu og sláðu á ENTER.\n"
-"\n"
-"\n"
-"viðbætur og/eða lagfæringar á göllum sem gætu verið til\n"
-"staðar í þessari útgáfu af Mandrake Linux má finna á \n"
-"\n"
-"\n"
-"%s \n"
-"\n"
-"Frekari upplýsingar um hvernig á að stilla vélina eftir innsetninguna er að\n"
-"finna í viðeigandi kafla í Official Mandrake Linux User's Guide bókinni."
 
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Reading printer database..."
+msgstr "Les prentara-gagnagrunn..."
 
-#: ../../install_messages.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+msgid "Generate auto install floppy"
+msgstr "Búa til diskling fyrir sjálfvirka uppsetningu"
 
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
 msgstr ""
 
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Entering step `%s'\n"
-msgstr "Hef skref `%s'\n"
+msgid "Somalia"
+msgstr "Sómalía"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Help"
-msgstr "Hjálp"
+msgid "No open source driver"
+msgstr "Enginn \"frjáls hugbúnaðar\" rekill"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "not configured"
-msgstr "Ekki stillt"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Líkt fyrra þrepi, en kerfið er nú alveg lokað og öryggið er á hæsta stigi."
 
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure"
-msgstr "Stilla"
+msgid "Nicaragua"
+msgstr "Nígarakúa"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Go on anyway?"
-msgstr "Viltu samt halda áfram?"
+msgid "New Caledonia"
+msgstr "Nýja Kaledónía"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "There was an error installing packages:"
-msgstr "Það kom upp villa við innsetningu pakka:"
+msgid "European protocol (EDSS1)"
+msgstr "Evrópskan samskiptastaðal (EDSSI)"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "There was an error ordering packages:"
-msgstr "Það kom upp villa við að raða pökkum:"
+msgid "Video mode"
+msgstr "Skjáhamur"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
+msgid "Please enter your email address below "
+msgstr "Vinsamlega gefðu upp netfang þitt "
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Refuse"
-msgstr "Neita"
+msgid "Oman"
+msgstr "Óman"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Samþykkja"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Netstillingar"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Installing package %s"
-msgstr "Set inn pakka %s"
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "%d packages"
-msgstr "%d pakkar"
+msgid "New size in MB: "
+msgstr "Stærð í MB: "
 
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "No details"
-msgstr "Engar upplýsingar"
+msgid "Partition table type: %s\n"
+msgstr "Disksneiðartöflu tegund: %s\n"
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Details"
-msgstr "Ítarlegar"
+msgid "Authentication Windows Domain"
+msgstr "Auðkenning Windows Léns"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Augnablik, undirbý innsetningu..."
+msgid "US keyboard"
+msgstr "Bandarískt lyklaborð"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Time remaining "
-msgstr "Tími eftir "
+msgid "Buttons emulation"
+msgstr "Hnappahermir"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Estimating"
-msgstr "Áætla"
+msgid ", network printer \"%s\", port %s"
+msgstr ", netprentari \"%s\", gátt %s"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Installing"
-msgstr "Set inn"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "Veldu pakkana sem þú vilt setja inn"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Minimal install"
-msgstr "Minimal uppsetning"
+msgid "Sending Speed:"
+msgstr "Sendihraði:"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Updating package selection"
-msgstr "Uppfæri val á pökkum"
+msgid "Halt bug"
+msgstr "Halt villa"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Load/Save on floppy"
-msgstr "Hlaða/Vista á diskling"
+msgid "Mail alert configuration"
+msgstr "Uppsetning póstviðvörunnar"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "<- Previous"
-msgstr "<- Fyrri"
+msgid "Tokelau"
+msgstr "Tokelau"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Install"
-msgstr "Innsetning"
+msgid "Bosnian"
+msgstr "Bosnískt"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Show automatically selected packages"
-msgstr "Sýna sjálfvirkt valda pakka"
+msgid "Release: "
+msgstr "Útgáfa: "
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Þú getur ekki afvalið þennan pakka, það verður að uppfæra hann"
+msgid "Connection speed"
+msgstr "Tengihraði"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
 msgstr ""
-"það verður að uppfæra þennan pakka\n"
-"Ertu viss um að þú viljir afvelja hann?"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Þú getur ekki afvalið þennan pakka hann er þegar uppsettur"
-
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Þessi pakki verður að vera uppsettur, þú getur ekki afvalið hann"
+msgid "Namibia"
+msgstr "Namibía"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "You can't select/unselect this package"
-msgstr "Þú getur ekki vali/afvalið þennan pakka"
+msgid "Database Server"
+msgstr "Gagnagrunnsmiðlari"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "The following packages are going to be removed"
-msgstr "Eftirfarandi pakkar verða fjarlægðir"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "sérstakir eiginleikar rekilsins (brennari og/eða DVD stuðningur)"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "Eftirfarandi pakkar verða settir inn"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Get ekki bætt við sneið á _forsniðinn_ RAID md%d"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Þú getur ekki valið þennan pakka því það er ekki nægilegt pláss"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Mikilvægi: %s\n"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Stærð: %d KB\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "Útgáfa: %s\n"
+msgid "Please wait, setting security options..."
+msgstr "Augnablik stilli öryggisvalkosti..."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "Nafn: %s\n"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Óþekkt|CPH06X (bt878) [margir framleiðendur]"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Bad package"
-msgstr "Skemmdur pakki"
+msgid "Launch the graphical environment when your system starts"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Other"
-msgstr "Annað"
+msgid "hourly"
+msgstr "hverri klst"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Heildarstærð: %d / %d MB"
+msgid "          Successfuly Restored on %s       "
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Next ->"
-msgstr "Næsta ->"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Individual package selection"
-msgstr "Val á einstökum pökkum"
+msgid "Making printer port available for CUPS..."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Package Group Selection"
-msgstr "Val á pakkahóp"
+msgid "Antigua and Barbuda"
+msgstr "Antigua og Barbuda"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save packages selection"
-msgstr "Vista val á pakkahóp"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Automated"
-msgstr "Sjálfvirkt"
+msgid "Spanish"
+msgstr "Spænskt"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Replay"
-msgstr "Spila aftur"
+msgid "Start"
+msgstr "Ræsa"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
+"Arguments: (arg)\n"
 "\n"
-"You may prefer to replay the installation.\n"
+"Activate/Disable ethernet cards promiscuity check."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Generate auto install floppy"
-msgstr "Búa til diskling fyrir sjálfvirka uppsetningu"
+msgid "Configuring applications..."
+msgstr "Set upp forrit..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Reboot"
-msgstr "Endurræsa"
+msgid "Normal modem connection"
+msgstr "Venjuleg mótaldstenging"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "File Selection"
+msgstr "Skráaval"
+
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"Some steps are not completed.\n"
+"Which ISDN configuration do you prefer?\n"
 "\n"
-"Do you really want to quit now?"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
 msgstr ""
-"Sum skref eru ennþá eftir.\n"
+"Hvaða ISDN uppsetningu viltu nota?\n"
 "\n"
-"Viltu virkilega hætta núna?"
+"* Eldri uppsetningin notarisdn4net. þar eru öflug tæki\n"
+"og tól en erfitt að setja upp, og ekki staðlað.\n"
+"\n"
+"* Nýja uppsetningin er einfaldari að setja upp, meira\n"
+"stöðluð, en færri tæki og tól.\n"
+"\n"
+"Við mælum með nýju uppsetningunni.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "Creating auto install floppy..."
-msgstr "Bý til diskling fyrir sjálfvirka uppsetningu..."
+msgid "CUPS"
+msgstr "CUPS"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Settu tóman diskling í drif %s"
+msgid "Run config tool"
+msgstr "keyra stillieiningu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
+msgid "Bootloader installation"
+msgstr "Uppsetning ræsistjóra"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Innsetning ræsiforrits brást sökum eftirfarandi villu:"
+msgid "Root partition size in MB: "
+msgstr "Stærð rótardisksneiðar í MB: "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Installing bootloader"
-msgstr "Setja inn ræsistjórann"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Þessi pakki verður að vera uppsettur, þú getur ekki afvalið hann"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "Etherboot ISO image is %s"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Viltu nota aboot?"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
 msgstr ""
+"named (BIND) er nafnaþjónusta fyrir net (DNS) sem varpar netnafni yfir í IP-"
+"vistföng."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Preparing bootloader..."
-msgstr "Set upp ræsistjórann..."
+msgid "Disconnect..."
+msgstr "Aftengjast.."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Domain Admin Password"
-msgstr "Lykilorð kerfisstjóra léns"
+msgid "Saint Lucia"
+msgstr "Sankti Lúsía"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Domain Admin User Name"
-msgstr "Notandanafn kerfisstjóra léns"
+msgid "Report"
+msgstr "Skýrsla"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Windows Domain"
-msgstr "Windows Lén"
+msgid "Palau"
+msgstr "Palá"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Authentication Windows Domain"
-msgstr "Auðkenning Windows Léns"
+msgid "level"
+msgstr "stig"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS þjónn"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "NIS Domain"
-msgstr "NIS lén"
+msgid "Package Group Selection"
+msgstr "Val á pakkahóp"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Authentication NIS"
-msgstr "Auðkenning NIS"
+msgid "Restore Via Network Protocol: %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "You can configure each parameter of the module here."
+msgstr "Þú getur stillt öll viðföng einingarinnar hér"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "LDAP Server"
-msgstr "LDAP þjónn"
+msgid "Choose the resolution and the color depth"
+msgstr "Veldu upplausn og fjölda lita"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Grunn DN"
+msgid "Emulate third button?"
+msgstr "Herma eftir þriðja hnapp?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Authentication LDAP"
-msgstr "Auðkenning LDAP"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Mount"
+msgstr "Tengipunktur"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Local files"
-msgstr "Staðbundnar skrár"
+msgid "Creating auto install floppy"
+msgstr "Bý til sjálfvirkan uppsetningar-diskling"
 
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Authentication"
-msgstr "Auðkenning"
+msgid "Install updates"
+msgstr "Setja inn uppfærslur"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"
+msgid "text box height"
+msgstr "hæð textaglugga"
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "No password"
-msgstr "Ekkert lykilorð"
+msgid "State"
+msgstr "Staða"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Set root password"
-msgstr "Ákveða rótarlykilorð"
+msgid "Be sure a media is present for the device %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Þú hefur ekki sett upp X, ertu viss um að þú viljir þetta?"
+msgid "Enable multiple profiles"
+msgstr "Virkja mörg snið"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Þjónustur: %d ræstar af %d skráðum"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Services"
-msgstr "Þjónustur"
+msgid "Local printer"
+msgstr "Staðbundinn prentari"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "System"
-msgstr "Kerfi"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "%s on %s"
-msgstr "%s á %s"
+msgid "Files Restored..."
+msgstr "Skrár endurheimtar..."
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Bootloader"
-msgstr "Ræsistjóri"
+msgid "Package selection"
+msgstr "Val á pökkum"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Boot"
-msgstr "Ræsing"
+msgid "Mauritania"
+msgstr "Máritanía"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "disabled"
-msgstr "óvirkt"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "activated"
-msgstr "Virk"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Firewall"
-msgstr "Eldveggur"
+msgid "All primary partitions are used"
+msgstr "Allar aðal-skráarsneiðar eru í notkun"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Security"
-msgstr "Öryggi"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Eftir að þessu er lokið mælum við með að þú  endurræsir X umhverfið til að "
+"koma í veg fyrir nafna-tengd vandamál."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Security Level"
-msgstr "Öryggisstig"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Network"
-msgstr "Net"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Uppsetning"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Network & Internet"
-msgstr "Staðarnet og Internet"
+msgid "Configuring IDE"
+msgstr "Uppsetning IDE"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Graphical interface"
-msgstr "Grafískt viðmót"
+msgid "Network functionality not configured"
+msgstr "Netmöguleikar ekki skilreindir"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Hardware"
-msgstr "Vélbúnaður"
+msgid "Configure module"
+msgstr "Stilla einingu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "TV card"
-msgstr "Sjónvarpskort"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kókos (Keeling) eyjar"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Ekkert hljóðkort fannst reyndu að keyra \"harddrake\" eftir uppsetningu"
+msgid "Disconnecting from the Internet "
+msgstr "Aftengjast frá Internetinu "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Keyrðu \"sndconfig\" eftir uppsetningu til að stilla hljóðkortið þitt"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Þú þarft að endurræsa áður en breytingar taka gildi"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Er kannski ISA hhljóðkort í vélinni?"
+msgid "Provider phone number"
+msgstr "Símanúmer netþjónustu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Sound card"
-msgstr "Hljóðkort"
+msgid "Host %s"
+msgstr "Vél %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remote CUPS server"
-msgstr "Fjarlægur CUPS þjónn"
+msgid "Armenia"
+msgstr "Armenía"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No printer"
-msgstr "Enginn prentari"
+msgid "Fiji"
+msgstr "Fíjí"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Printer"
-msgstr "Prentari"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mouse"
-msgstr "Mús"
+msgid "Second floppy drive"
+msgstr "Annað drif"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Timezone"
-msgstr "Tímabelti"
+msgid "About Harddrake"
+msgstr "Um Harddrake"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Keyboard"
-msgstr "Lyklaborð"
+msgid "Drive capacity"
+msgstr "Diskstærð"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Summary"
-msgstr "Yfirlit"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Settu diskling í drifið\n"
+"Öll gögn á þessum diskling tapast"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "NTP Server"
-msgstr "NTP þjónn"
+msgid "Size: %s"
+msgstr "Stærð: %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sjálfvirk tímastilling (með NTP)"
+msgid "Control and Shift keys simultaneously"
+msgstr "Ctrl og Shift lyklar samtímis"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Tölvuklukkan stillt á GMT"
+msgid "secondary"
+msgstr "auka"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Which is your timezone?"
-msgstr "Hvert er þitt tímabelti?"
+msgid "View Backup Configuration."
+msgstr "Skoða vistaða stillingu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Would you like to try again?"
-msgstr "Viltu reyna aftur?"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Get ekki tengst spegilvél %s"
+msgid "No password"
+msgstr "Ekkert lykilorð"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Hef samband við vélina til að sækja lista yfir fáanlega pakka"
+msgid "Nigeria"
+msgstr "Nígería"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Veldu spegilvélina þaðan sem á að sækja pakkanna"
+msgid "There is no existing partition to use"
+msgstr "það eru engar núverandi disksneiðar til að nota"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
 msgstr ""
-"Hef samband við Mandrake Linux vefinn til að sækja lista yfir fáanlega "
-"spegla..."
+"Eftirfarandi myndskannar\n"
+"\n"
+"%s\n"
+"eru tiltækir á kerfinu þínu\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
 msgstr ""
-"Þú hefur nú möguleika á að sækja uppfærða pakka.  Þessir pakkar\n"
-"hafa verið uppfærðir eftir að dreifingin ver send úr húsi.  Þeir kunna\n"
-"að innihalda villuleiðréttingar eða öryggisuppfærslur.\n"
-"\n"
-"Til að sækja þessa pakka þá verður þú að vera tengdur Internetinu.\n"
-"\n"
-"Viltu sækja uppfærslurnar?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Settu uppfærslu-diskling í drif %s"
+msgid "Hard drive information"
+msgstr "Sýna upplýsingar um harðan disk"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Settu ræsidiskling í drif %s"
+msgid "Russian"
+msgstr "Rússneskt"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Post-install configuration"
-msgstr "Lokauppsetning"
+msgid "Jordan"
+msgstr "Jórdanía"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Hide files"
+msgstr "Fela skrár"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "Finna sjálfkrafa staðværa prentara"
+
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
-"Installing package %s\n"
-"%d%%"
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
 msgstr ""
-"Set inn pakka %s\n"
-"%d%%"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Preparing installation"
-msgstr "Undirbý innsetningu"
+msgid "Sorry, no floppy drive available"
+msgstr "Ekkert disklingadrif til staðar"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-ROM merkt \"%s\""
+msgid "Bolivia"
+msgstr "Bólivía"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
 msgstr ""
-"Ef þú hefur alla geisladiskana í listanum hér að neðan smelltu þá á 'Í "
-"lagi'\n"
-"Ef þú hefur engan þessara geisladiska smelltu þá á 'Hætta'\n"
-"Ef einhverja diska vantar, afveldu þá og smelltu síðan á 'Í lagi'"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Allt"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Alger lágmarksuppsetning (ekkert urpmi)"
+msgid "Bad package"
+msgstr "Skemmdur pakki"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Með grunn handbókum (mælt með!)"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "With X"
-msgstr "Með X"
+msgid "DrakSec Basic Options"
+msgstr "DrakSec grunnvalkostir"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
 #, c-format
 msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
 msgstr ""
-"Þú hefur ekki valið neina pakkahópa.\n"
-"Veldu lágmarksuppsetningu sem þú vilt:"
+"\n"
+"\n"
+"\n"
+"Athugið ef þú hefur ISA PnP hljóðkort þá verður þú að nota sndconfig "
+"forritið.. Sláðu bara inn skipunina \"sndconfig\" á stjórnskjá."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Type of install"
-msgstr "Tegund uppsetningar"
+msgid "Romania"
+msgstr "Rúmenía"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Selected size is larger than available space"
-msgstr "Valin stærð er stærri en tiltækt pláss"
+msgid "choose device"
+msgstr "veldu tæki"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Settu inn diskling sem inniheldur pakkaval"
+msgid "Canada"
+msgstr "Kanada"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Loading from floppy"
-msgstr "Hleð inn frá diskling"
+msgid "Remove from LVM"
+msgstr "Taka úr LVM"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Package selection"
-msgstr "Val á pökkum"
+msgid "Timezone"
+msgstr "Tímabelti"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Save on floppy"
-msgstr "Vista á diskling"
+msgid "German"
+msgstr "Þýskt"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Load from floppy"
-msgstr "Hlaða frá diskling"
+msgid "Next ->"
+msgstr "Næsta ->"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 msgstr ""
-"Það er ekki nægilegt pláss á kerfinu þínu fyrir uppsetningu eða uppfærslu (%"
-"d > %d)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Looking for available packages..."
-msgstr "Leita að fáanlegum pökkum..."
+msgid "Guinea-Bissau"
+msgstr "Gínea-Bissáu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Leita að pökkum til að uppfæra..."
+msgid "Horizontal refresh rate"
+msgstr "Lárétt tíðni"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Looking at packages already installed..."
-msgstr "Leita að þegar uppsettum pökkum"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Get ekki aftengt tengipunkt þar sem þessi disksneið inniheldur\n"
+"sýndardisk-skrá.  Fjarlægðu sýndardiskinn fyrst (aftengdu)."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Leita að fáanlegum pökkum og endurbyggi rpm gagnagrunn..."
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Ekki nægjanlegt diskminni fyrir innsetningu.  Bættu við það"
+msgid "USB controllers"
+msgstr "USB stýringar"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
+msgid "What norm is your TV using?"
+msgstr "Hvaða staðal notar sjónvarpið þitt?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Check bad blocks?"
-msgstr "Athuga skemmdar blokkir?"
+msgid "Type:"
+msgstr "Tegund:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Veldu þær disksneiðar sem á að forsníða"
+msgid "Share name"
+msgstr "Sameignarheiti"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "enable"
+msgstr "virkja"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
 msgstr ""
-"Þú verður að ræsa tölvuna aftur svo breytingar á sneiðatöflunni taki gildi"
+"Hef samband við Mandrake Linux vefinn til að sækja lista yfir fáanlega "
+"spegla..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
 msgstr ""
+"Vandamál kom upp við enduræsingu nets: \n"
+"\n"
+"%s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Choose the mount points"
-msgstr "Veldu tengipunktana"
+msgid "Remove the loopback file?"
+msgstr "Fjarlægja sýndardisk-skrá?"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Leita á disksneiðum að tengipunktum"
+msgid "Selected size is larger than available space"
+msgstr "Valin stærð er stærri en tiltækt pláss"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No partition available"
-msgstr "Engin tiltæk disksneið"
+msgid "NCP server name missing!"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Configuring IDE"
-msgstr "Uppsetning IDE"
+msgid "Please choose your country."
+msgstr "Veldu þér land,"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Hard Disk Backup files..."
+msgstr "Afritaskrár á hörðum diski..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Stilli PCMCIA kort..."
+msgid "Laotian"
+msgstr "Laotian"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Samoa"
+msgstr "Samóa"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Button 3 Emulation"
-msgstr "Herma eftir miðhnappi"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"rstat samskiptareglan leyfir notendum á neti að sækja\n"
+"upplýsingar um afköst annarra véla á netinu."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Button 2 Emulation"
-msgstr "Tveggja hnappa hermir"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Endurgeri lista af uppsettum myndskönnum ..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Buttons emulation"
-msgstr "Hnappahermir"
+msgid "Scanner"
+msgstr "Myndskanni"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Við hvaða raðtengi er músin þín tengd?"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Viðvörun: Prófun á þessu skjákorti gæti fryst tölvuna þína"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mouse Port"
-msgstr "Músartengi"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Notandanafnið má bara innihalda litla stafi, tölustafi, `-' og `_'"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Please choose your type of mouse."
-msgstr "Hvernig mús ertu með?"
+msgid "Menudrake"
+msgstr "Menudrake"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Mismunandi lykilorð"
+#: ../../security/level.pm:1
+#, c-format
+msgid "Welcome To Crackers"
+msgstr "Velkomin(n) í tölvuþrjótinn"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Upgrade %s"
-msgstr "Uppfæra %s"
+msgid "Module options:"
+msgstr "Stillingar kjarnaeininga:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Er þetta innsetning eða uppfærsla?"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Install/Upgrade"
-msgstr "Innsetning/Uppfærsla"
+msgid "Go on without configuring the network"
+msgstr "Halda áfram án þess að stilla nettengingu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Hér er listi af mögulegum lyklaborðsuppsetningum"
+msgid "Abort"
+msgstr "Hætta við"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Hvaða lyklaborðsuppsetningu viltu?"
+msgid "No password prompt on %s at port %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Quit"
-msgstr "Hætta"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Krossaðu hér við ef þú vilt nota 'non-rewinding' tækið"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "License agreement"
-msgstr "Notkunarskilmálar"
+msgid "Usage of remote scanners"
+msgstr "Nota myndskanna frá öðrum vélum"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "An error occurred"
-msgstr "Villa kom upp"
+msgid "\t-CDROM.\n"
+msgstr ""
 
-#: ../../install_steps_newt.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
 msgstr ""
-"  <Tab>/<Alt-Tab> milli hluta   |   <Bilslá> velur   |   <F12> næsti skjár "
 
-#: ../../install_steps_newt.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux innsetning %s"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norskt)"
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No floppy drive available"
-msgstr "Ekkert disklingadrif aðgengilegt"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Welcome to %s"
-msgstr "Velkomin(n) að %s"
+msgid "Unable to fork: %s"
+msgstr "Get ekki kvíslað: %s"
 
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sumir mikilvægir pakkar voru ekki uppsettir eðlilega.\n"
-"Annaðhvort er geisladiskurinn eða drifið skemmt.\n"
-"Athugaðu geisladiskinn á uppsettri vél með skipuninni\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
+msgid "Type: "
+msgstr "Tegund: "
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s tengipunktur er nú þegar til"
+msgid "<-- Edit Client"
+msgstr "<-- Breyta biðlara"
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Óþekkt villa kom upp sem ekki er hægt að meðhöndla.\n"
-"Haltu áfram á eigin ábyrgð."
+msgid "no fonts found"
+msgstr "Engin letur fundust"
 
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Please wait"
-msgstr "Augnablik..."
+msgid "Mouse"
+msgstr "Mús"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Ok"
-msgstr "Í lagi"
+msgid "not enough room in /boot"
+msgstr "ekki nægilegt pláss í /boot"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Finish"
-msgstr "Ljúka"
+msgid "Choosing an arbitratry driver"
+msgstr "Velja einhvern rekil"
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Basic"
-msgstr "Einfalt"
+msgid "Host name"
+msgstr "Heiti vélar"
 
-#: ../../interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Advanced"
-msgstr "Ítarlegra"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Remove"
-msgstr "Fjarlægja"
+msgid "the color of the progress bar"
+msgstr "litur framvindusúlu"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Modify"
-msgstr "Breyta"
+msgid "Suppress Fonts Files"
+msgstr ""
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Add"
-msgstr "Bæta við"
+msgid "Add to RAID"
+msgstr "Bæta við RAID"
 
-#: ../../interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Choose a file"
-msgstr "Veldu skrá"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
 msgstr ""
-"Hér getur þú valið lykla eða lyklasamsetningar sem skipta \n"
-"milli mismunandi lykilboðsuppsetninga (t.d íslenskt/enskt)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Right \"Windows\" key"
-msgstr "Hægri \"Windows\" lykill"
+msgid "No floppy drive available!"
+msgstr "Ekkert disklingadrif aðgengilegt!"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Left \"Windows\" key"
-msgstr "Vinstri \"Windows\" lykill"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" lykill"
+msgid "Continue anyway?"
+msgstr "Halda samt áfram?"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift lyklar samtímis"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl og Alt lyklar samtímis"
+msgid "Printer"
+msgstr "Prentari"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CapsLock key"
-msgstr "CapsLock lykill"
+msgid "Saudi Arabia"
+msgstr "Sádiarabía"
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Ctrl og Shift lyklar samtímis"
+msgid "Internet"
+msgstr "Internet"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Báðir Shift lyklar samtímis"
+msgid "Some devices were added:\n"
+msgstr "Nokkrum tækjum var bætt við:\n"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Right Alt key"
-msgstr "Hægri Alt lykill"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Skilgreining: %s sívalningar, %s hausar, %s geirar\n"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Júgoslavneskt (Latínu upps.)"
+msgid "Printing on the printer \"%s\""
+msgstr "Prenta á prentara \"%s\""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Víetnamskt \"töluröð\" QWERTY"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "US keyboard (international)"
-msgstr "Bandarískt (alþjóðlegt)"
+msgid "Restore From Tape"
+msgstr "Endurheimta frá segulbandi"
 
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "US keyboard"
-msgstr "Bandarískt lyklaborð"
+msgid "Choose the profile to configure"
+msgstr "Veldu snið til að stilla"
 
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "UK keyboard"
-msgstr "Breskt lyklaborð"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Gefðu upp Zeroconf heiti vélar án punkts ef þú vilt ekki\n"
+"nota sjálfgefið nafn vélar."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Ukrainian"
-msgstr "Úkraínskt"
+msgid "Backup Now from configuration file"
+msgstr "Afrita nú frá stillingaskrá"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkneskt (nútíma \"Q\" módel)"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Heiti tengipunkta eiga aðeins að innihalda bókstafi og tölur"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkneskt (hefðbundið \"F\" módel)"
+msgid "Restarting printing system..."
+msgstr "Endurræsi prentkerfi..."
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Tajik keyboard"
-msgstr "Tajik lyklaborð"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Thai keyboard"
-msgstr "Tælenskt lyklaborð"
+msgid "See hardware info"
+msgstr "Skoðaðu vélbúnaðarupplýsingar"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamílskt (ritvélaruppsetning)"
+msgid "First sector of boot partition"
+msgstr "Á fyrsta geira ræsidisksneiðar"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamílskt (ISCII uppsetning)"
+msgid "Printer manufacturer, model"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbneskt (kýrílskt)"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
 
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slóvakískt (QWERTY)"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slóvakískt (QWERTZ)"
+msgid "Subnet Mask:"
+msgstr "Staðarnetsía:"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Slovenian"
-msgstr "Slóvenskt"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Swedish"
-msgstr "Sænskt"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Hér þarf að gefa upp 'horizontal sync' tíðni skjásins þíns. Þú getur\n"
+"valið tíðnisvið að neðan sem passar við staðlaða skjái eða gefið upp\n"
+"eitthvað annað.\n"
+"\n"
+"það er MJÖG MIKILVÆGT að velja ekki of hátt tíðnisvið fyrir skjáinn. Hafir\n"
+"þú einhverjar efasemdir, veldu þá lægri stillingar."
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rússneskt (Yawerty)"
+msgid "Modify"
+msgstr "Breyta"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Russian"
-msgstr "Rússneskt"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rúmenskt (qwerty)"
+msgid "Need hostname, username and password!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rúmenskt (qwertz)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanadískt (Quebec)"
+msgid "HardDrake"
+msgstr "HardDrake"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Portuguese"
-msgstr "Portúgalskt"
+msgid "new"
+msgstr "ný"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Pólskt (qwertz)"
+msgid "Would you like to try again?"
+msgstr "Viltu reyna aftur?"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Pólskt (qwerty)"
+msgid "Wizard"
+msgstr "Álfur"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Norwegian"
-msgstr "Norskt"
+msgid "Edit selected server"
+msgstr "Breyta völdum prentara"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dutch"
-msgstr "Hollenskt"
+msgid "Please choose where you want to backup"
+msgstr "Veldu hvert þú vilt taka afrit"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Maltese (US)"
-msgstr "Maltneskt (US)"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Þú verður að ræsa tölvuna aftur svo breytingar á sneiðatöflunni taki gildi"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Maltese (UK)"
-msgstr "Maltneskt (UK)"
+msgid "Do not include the browser cache"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongólskt (kýrílskt)"
+msgid "Please, choose your keyboard layout."
+msgstr "Hvaða lyklaborðsuppsetningu viltu?"
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
 #, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Búrmenskt)"
+msgid "Standard"
+msgstr "Venjuleg"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Macedonian"
-msgstr "Makedónískt"
+msgid "Please choose your mouse type."
+msgstr "Hvernig mús ertu með?"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Connect..."
+msgstr "Tengjast..."
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Latvian"
-msgstr "Lettneska"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Gat ekki stillt prentara \"%s\"!"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litháenískt \"hljóðfræðilegt\" QWERTY"
+msgid "not configured"
+msgstr "Ekki stillt"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litháenískt \"töluröð\" QWERTY"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litháenískt AZERTY (nýtt)"
+msgid "About"
+msgstr "Um forrit"
 
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litháenískt AZERTY (gamalt)"
+msgid "Proxies configuration"
+msgstr "Seluppsetning"
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Laotian"
-msgstr "Laotian"
+msgid "GlidePoint"
+msgstr "GlidePoint"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Latin American"
-msgstr "Suður amerískt"
+msgid "Start: sector %s\n"
+msgstr "Byrja: geiri %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Korean keyboard"
-msgstr "Kóreskt lyklaborð"
+msgid "Network interface already configured"
+msgstr "Nettenging þegar uppsett"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanskt 106 lykla"
+msgid "Couldn't access the floppy!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "tengist bugzilla álfi..."
 
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Italian"
-msgstr "Ítalskt"
+msgid "Mail Server"
+msgstr "Póstþjónn"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Icelandic"
-msgstr "Íslenskt"
+msgid "Please click on a partition"
+msgstr "Smelltu á disksneið"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Iranian"
-msgstr "Íranskt"
+msgid "Linux"
+msgstr "Linux"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Ísraelískt (hljóðfr.)"
+msgid "Have a nice day!"
+msgstr "Njóttu dagsins!"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Israeli"
-msgstr "Ísraelskt"
+msgid "across Network"
+msgstr "yfir net"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Croatian"
-msgstr "Króatískt"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Hungarian"
-msgstr "Ungverskt"
+msgid "Upgrade %s"
+msgstr "Uppfæra %s"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Select Printer Connection"
+msgstr "Veldu prenttengingu"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Leit að sjónvarpsrásum í gangi..."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Greek"
-msgstr "Grískt"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgískt (\"Latínu\")"
+msgid "IP Range Start:"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgískt (\"Rússneskt\")"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "French"
-msgstr "Franskt"
+msgid "the height of the progress bar"
+msgstr "hæð framvindusúlu"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Finnish"
-msgstr "Finnskt"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Spanish"
-msgstr "Spænskt"
+msgid "Argentina"
+msgstr "Argentína"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Estonian"
-msgstr "Eistlenskt"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Sænskt)"
+msgid "Domain Name Server"
+msgstr "Nafnaþjónn léns (DNS)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norskt)"
+msgid "Security Level:"
+msgstr "Öryggisþrep:"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Mount points must begin with a leading /"
+msgstr "Heiti tengipunkta verða að byrja á /."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Danish"
-msgstr "Danskt"
+msgid "Postfix Mail Server"
+msgstr "Postfix póstþjónn"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Quit without saving"
+msgstr "Hætta án þess að vista"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "German (no dead keys)"
-msgstr "Þýskt (engir dauðir lyklar)"
+msgid "Yemen"
+msgstr "Jemen"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "German"
-msgstr "Þýskt"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tékkneskt (QWERTY)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tékkneskt (QWERTZ)"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Það er úr mörgu að velja (%s).\n"
 
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "Svissneskt (frönsk uppsetn.)"
+msgid "Hard drive detection"
+msgstr "Leita að hörðum disk(um)"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "Svissneskt (þýsk uppsetn.)"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Þú hefur ekki valið neina pakkahópa.\n"
+"Veldu lágmarksuppsetningu sem þú vilt:"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Belarusian"
-msgstr "Hvít-Rússneskt"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "Hvernig mús ertu með?"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Bosnian"
-msgstr "Bosnískt"
+msgid "Tajikistan"
+msgstr "Tajikistan"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilískt (ABNT 2)"
+msgid "Accept"
+msgstr "Samþykkja"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Búlgarskt (BDS)"
+msgid "Description"
+msgstr "Lýsing"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Búlgarskt (hljóðfræðilegt)"
+msgid "Error opening %s for writing: %s"
+msgstr "Villa við að opna %s til skriftar: %s"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Bengali"
-msgstr "Bengalskt"
+msgid "Mouse type: %s\n"
+msgstr "Tegund músar: %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Belgian"
-msgstr "Belgískt"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Adzerbadjanskt (latneskt)"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Gefðu upp stærð CD/DVD diska (Mb)"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Arabic"
-msgstr "Arabískt"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenskt (hljóðfræðilegt)"
+msgid "Expert Area"
+msgstr "F. snillinga"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenskt (hljóðfræðilegt)"
+msgid "Choose a monitor"
+msgstr "Veldu skjá"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Armenian (old)"
-msgstr "Armenskt (gamalt)"
+msgid "Empty label not allowed"
+msgstr "Autt er ekki leyft"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Albanian"
-msgstr "Albanskt"
+msgid "Maltese (UK)"
+msgstr "Maltneskt (UK)"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Polish"
-msgstr "Pólskt"
+msgid "I can't add any more partition"
+msgstr "Get ekki bætt við disksneiðum"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Size in MB: "
+msgstr "Stærð í MB: "
 
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Zimbabwe"
-msgstr "Simbave"
+msgid "Remote printer"
+msgstr "Fjartengdur prentari"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Zambia"
-msgstr "Sambía"
+msgid "Please choose a language to use."
+msgstr "Vinsamlega veldu land til að nota."
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "South Africa"
-msgstr "Suður Afríka"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Serbia"
-msgstr "Serbía"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "Ég get stillt tölvuna þína til að stimpla sjálfkrafa inn einn notanda."
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Floppy format"
+msgstr "Forsnið disklings"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Yemen"
-msgstr "Jemen"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Samoa"
-msgstr "Samóa"
+msgid "Generic Printers"
+msgstr "Almennir prentarar"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis og Futuna"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Vanuatu"
-msgstr "Vanuatú"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Myndskannar á þessarri vél eru einnig aðgengilegir frá öðrum vélum"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Vietnam"
-msgstr "Víetnam"
+msgid "First sector of the root partition"
+msgstr "Á fyrsta geira ræsidisksneiðar"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Jómfrúreyjar (US)"
+msgid "Alternative drivers"
+msgstr "Aukareklar"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Virgin Islands (British)"
-msgstr "Jómfrúreyjar (Breskt)"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Venezuela"
-msgstr "Venesúela"
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent og Grenadín"
+msgid "Cape Verde"
+msgstr "Grænhöfðaeyjar"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Hvort þessi örgjörvi er haldinn Cyrix 6x86 Coma villunni"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Eldri pentium örgjörvar voru gallaðir og frusu þegar þeir þýddu F00F "
+"aðgerðina"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Vatican"
-msgstr "Vatikanið"
+msgid "Guam"
+msgstr "Guam"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Uzbekistan"
-msgstr "Úsbekistan"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Uruguay"
-msgstr "Úrúgvæ"
+msgid "/Options/Test"
+msgstr "/Valkostir/Prófun"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Bandaríkin, smærri eyjar"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Þetta þrep verður að nota með varúð. Það gerir einfalt að nota tölvuna\n"
+"þína, en hún verður mjög viðkvæm.  Hún ætti ekki að vera tengd öðrum\n"
+"tölvum á netinu.  Engra lykilorða er krafist."
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Uganda"
-msgstr "Úganda"
+msgid "Mounting partition %s"
+msgstr "Tengi disksneið %s"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ukraine"
-msgstr "Úkraína"
+msgid "User name"
+msgstr "Notandanafn"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Tanzania"
-msgstr "Tansanía"
+msgid "New configuration (isdn-light)"
+msgstr "Nýrri stillingar (isdn-light)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Taiwan"
-msgstr "Tævan"
+msgid "Userdrake"
+msgstr "Userdrake"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Tuvalu"
-msgstr "Túvaú"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Hvaða disksneið vilt þú nota fyrir Linux4Win?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trínidad og Tóbagó"
+msgid "Backup system"
+msgstr "Afrita kerfi"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turkey"
-msgstr "Tyrkland"
+msgid "Test pages"
+msgstr "Prufusíður"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Tunisia"
-msgstr "Túnis"
+msgid "Checking %s"
+msgstr "Athuga %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turkmenistan"
-msgstr "Túrkmenistan"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Sökkul prentara-valkostir"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "East Timor"
-msgstr "Austur Tímor"
+msgid "Card mem (DMA)"
+msgstr "Kortminni (DMA)"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "France"
+msgstr "Frakkland"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Tajikistan"
-msgstr "Tajikistan"
+msgid "browse"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Thailand"
-msgstr "Taíland"
+msgid "Checking installed software..."
+msgstr "Athuga uppsettann hugbúnað..."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Togo"
-msgstr "Tógó"
+msgid "Remote printer name missing!"
+msgstr "Nafn vantar á fjartengdan prentara!"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "French Southern Territories"
-msgstr "Frönsku suðureyjar"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Viltu virkja prentun á prenturum á staðarnetinu?\n"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Chad"
-msgstr "Chad"
+msgid "Turkey"
+msgstr "Tyrkland"
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks og Kaikós eyjar"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Swaziland"
-msgstr "Svasiland"
+msgid "Number of buttons"
+msgstr "Fjöldi hnappa"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Syria"
-msgstr "Sýrland"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Víetnamskt \"töluröð\" QWERTY"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Module"
+msgstr "Eining"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome og Prinsípe"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Suriname"
-msgstr "Súrinam"
+msgid "Hardware"
+msgstr "Vélbúnaður"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Somalia"
-msgstr "Sómalía"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl og Alt lyklar samtímis"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "United States"
+msgstr "Bandaríkin"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "San Marino"
-msgstr "San Marínó"
+msgid "Default OS?"
+msgstr "Sjálfgefið stýrikerfi?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Sierra Leone"
-msgstr "Síera Leóne"
+msgid "Swiss (German layout)"
+msgstr "Svissneskt (þýsk uppsetn.)"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Slovakia"
-msgstr "Slóvakía"
+msgid "Configure all heads independently"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbarði og Jan Mayen"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Slovenia"
-msgstr "Slóvenía"
+msgid "NTP Server"
+msgstr "NTP þjónn"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid "Load/Save on floppy"
+msgstr "Hlaða/Vista á diskling"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Singapore"
-msgstr "Singapúr"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Þemað hefur ekki enn smellimynd í %s !"
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Sudan"
-msgstr "Súdan"
+msgid "nice"
+msgstr "þægilegt"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid "Leaving in %d seconds"
+msgstr "Hætti eftir %d sekúndur"
 
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Solomon Islands"
-msgstr "Salómon eyjar"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Hvaða raðtengi er mótaldið tengt við"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Saudi Arabia"
-msgstr "Sádiarabía"
+msgid "Country"
+msgstr "Land"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Rwanda"
-msgstr "Rúanda"
+msgid "Property"
+msgstr "Eiginleiki"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Russia"
-msgstr "Rússland"
+msgid "Ghostscript"
+msgstr "Ghostscript"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Romania"
-msgstr "Rúmenía"
+msgid "LAN Configuration"
+msgstr "Staðarnets-uppsetning"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Ghana"
+msgstr "Gana"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Qatar"
-msgstr "Kvatar"
+msgid "Path or Module required"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Palau"
-msgstr "Palá"
+msgid "Advanced Options"
+msgstr "Ítarlegri Valkostir"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Paraguay"
-msgstr "Paragvæ"
+msgid "Coma bug"
+msgstr "Coma villa"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Portugal"
-msgstr "Portúgal"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Palestine"
-msgstr "Palestína"
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Ríko"
+msgid "There was an error installing packages:"
+msgstr "Það kom upp villa við innsetningu pakka:"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark bleksprautu stillingar"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre og Miquelon"
+msgid "Undo"
+msgstr "Afturkalla"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Poland"
-msgstr "Pólland"
+msgid "Save partition table"
+msgstr "Vista sneiðatöflu"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Finnish"
+msgstr "Finnskt"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Philippines"
-msgstr "Filippseyjar"
+msgid "Macedonia"
+msgstr "Makedónía"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Papua New Guinea"
-msgstr "Papúa Nýja-Gínea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "French Polynesia"
-msgstr "Franska Pólínesía"
+msgid "Slovenian"
+msgstr "Slóvenskt"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Peru"
-msgstr "Perú"
+msgid "Libya"
+msgstr "Líbía"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Oman"
-msgstr "Óman"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "New Zealand"
-msgstr "Nýja Sjáland"
+msgid "Table"
+msgstr "Tafla"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "I don't know how to format %s in type %s"
+msgstr "kann ekki að forsníða %s af tegundinni %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Nauru"
-msgstr "Nárú"
+msgid "Model"
+msgstr "Tegund"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Nicaragua"
-msgstr "Nígarakúa"
+msgid "Stop Server"
+msgstr "Stöðva þjón"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Nigeria"
-msgstr "Nígería"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk eyjar"
+msgid "Modem"
+msgstr "Módald"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Niger"
-msgstr "Níger"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "New Caledonia"
-msgstr "Nýja Kaledónía"
+msgid "Tuvalu"
+msgstr "Túvaú"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Namibia"
-msgstr "Namibía"
+msgid "Use auto detection"
+msgstr "Finna sjálfvirkt"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Mozambique"
-msgstr "Mósabmbík"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM veitir músarstuðning til forrita sem keyra í textaham Linux\n"
+"s.s. Midnight Commander.  Það veitir líka möguleika á að klippa\n"
+"og líma og valseðlaþjónustu í textaham."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Malaysia"
-msgstr "Malasía"
+msgid "Started on boot"
+msgstr "Virkjað við ræsingu"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Mexico"
-msgstr "Mexíkó"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Malawi"
-msgstr "Malaví"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Eftirfarandi aðgerðir er hægt að stilla til að sérsníða\n"
+"öryggiskerfi þitt.. Ef þú þarfnast aðstoðar, líttu á vísbendingarnar.\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Maldives"
-msgstr "Maldíví"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Mauritius"
-msgstr "Máritus"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "East Timor"
+msgstr "Austur Tímor"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "Del profile..."
+msgstr "Eyða sniði..."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Mauritania"
-msgstr "Máritanía"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Martinique"
-msgstr "Martiník"
+msgid "Installing Foomatic..."
+msgstr "Set inn Foomatic..."
 
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Northern Mariana Islands"
-msgstr "Norður Maríanaeyjar"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Stimplaðu þig út og sláðu á Ctrl-Alt-Backspace"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Mongolia"
-msgstr "Mongólía"
+msgid "detected"
+msgstr "skynjuð"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Það þarf að endurræsa netið, viltu endurræsa það núna?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Mali"
-msgstr "Malí"
+msgid "Package: "
+msgstr "Pakki: "
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Macedonia"
-msgstr "Makedónía"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Marshall Islands"
-msgstr "Marshall eyjar"
+msgid "SECURITY WARNING!"
+msgstr "ÖRYGGISAÐVÖRUN!"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "StarOffice"
+msgstr "StarOffice"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Moldova"
-msgstr "Moldóvía"
+msgid "No, I don't want autologin"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Monaco"
-msgstr "Mónakó"
+msgid "Windows Migration tool"
+msgstr "Windows flutningstól"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Morocco"
-msgstr "Marokkó"
+msgid "All languages"
+msgstr "Öll tungumál"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Libya"
-msgstr "Líbía"
+msgid "Removing %s"
+msgstr "Fjarlægi %s"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Latvia"
-msgstr "Lettland"
+msgid "Testing your connection..."
+msgstr "Prófa tenginguna þína..."
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Luxembourg"
-msgstr "Lúxemborg"
+msgid "Cache size"
+msgstr "Stærð skyndiminnis"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Lithuania"
-msgstr "Litháen"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Lykilorð eru nú virk, en ekki er mælt með notkun að tölvan sé nettengd."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Lesotho"
-msgstr "Lesótó"
+msgid "Start sector: "
+msgstr "Byrjunar geiri"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Liberia"
-msgstr "Líbería"
+msgid "Congo (Brazzaville)"
+msgstr "Kongó (brassaville)"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Pakkinn %s þarfnast innsetningar, viltu setja hann inn?"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid "Seychelles"
+msgstr "Seychelles"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Saint Lucia"
-msgstr "Sankti Lúsía"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lebanon"
-msgstr "Líbanon"
+msgid "Bad password on %s"
+msgstr "Rangt lykilorð á %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Kazakhstan"
-msgstr "Kasakstan"
+msgid "Zambia"
+msgstr "Sambía"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Cayman Islands"
-msgstr "Keyman eyjar"
+msgid "Security Administrator (login or email)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Kuwait"
-msgstr "Kúvæt"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Korea"
-msgstr "Kórea"
+msgid "Romanian (qwerty)"
+msgstr "Rúmenskt (qwerty)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Korea (North)"
-msgstr "Kórea (norður)"
+msgid "Under Devel ... please wait."
+msgstr "Í þróun... Bíðið."
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts og Nevis"
+msgid "Czech Republic"
+msgstr "Tékkland"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Comoros"
-msgstr "Kómoros"
+msgid "Egypt"
+msgstr "Egyptaland"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Old configuration (isdn4net)"
+msgstr "Eldri stillingar (isdn4net)"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Cambodia"
-msgstr "Kambódía"
+msgid "Sound card"
+msgstr "Hljóðkort"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgistan"
+msgid "Import Fonts"
+msgstr "Flytja inn letur"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Kenya"
-msgstr "Kenía"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Þú hefur eina stóra FAT disksneið.\n"
+"(venjulega notuð af Microsoft DOS/Windows).\n"
+"Ég legg til að þú endursníðir hana\n"
+"(smelltu á hana, síðan á \"Endursníða\")"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Japan"
-msgstr "Japan"
+msgid "Suppress Temporary Files"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Jordan"
-msgstr "Jórdanía"
+msgid "Change partition type"
+msgstr "Breyta tegund sneiðar"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Jamaica"
-msgstr "Jamaíka"
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Iceland"
-msgstr "Ísland"
+msgid "Network Options"
+msgstr "Netvalkostir"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Iran"
-msgstr "Íran"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Iraq"
-msgstr "Írak"
+msgid "Statistics"
+msgstr "Tölulegar uppl."
 
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Bresku indíueyjar"
+msgid "(on %s)"
+msgstr "(á %s)"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "India"
-msgstr "Indland"
+msgid "MM Series"
+msgstr "MM Series"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Israel"
-msgstr "Ísrael"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Ireland"
-msgstr "Írland"
+msgid "average"
+msgstr "meðal"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Indonesia"
-msgstr "Indónesía"
+msgid "New printer name"
+msgstr "Nýtt prentaranafn"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Hungary"
-msgstr "Ungverjaland"
+msgid "Equatorial Guinea"
+msgstr "Miðbaugs Gínea"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Haiti"
-msgstr "Haíti"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Croatia"
-msgstr "Króvatía"
+msgid "Build Backup"
+msgstr "Byggja afrit"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Honduras"
-msgstr "Hondúras"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard og McDonald eyjar"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Romanian (qwertz)"
+msgstr "Rúmenskt (qwertz)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "China"
-msgstr "Kína"
+msgid "Write Config"
+msgstr "Skrifa stillingar"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Guyana"
-msgstr "Gvíana"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Guinea-Bissau"
-msgstr "Gínea-Bissáu"
+msgid "Kiribati"
+msgstr "Kiribati"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Guatemala"
-msgstr "Gvatemala"
+msgid "Browse"
+msgstr "Flakka"
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Suður Georgía og suður samlokueyjar"
+msgid "CDROM"
+msgstr "CDROM"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Equatorial Guinea"
-msgstr "Miðbaugs Gínea"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Viltu reyna að tengjast Internetinu núna?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Guadeloupe"
-msgstr "Gvadalúp"
+msgid "Belgian"
+msgstr "Belgískt"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Guinea"
-msgstr "Gínea"
+msgid "Do you have an ISA sound card?"
+msgstr "Er kannski ISA hhljóðkort í vélinni?"
 
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Gambia"
-msgstr "Gambía"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Ekkert netkort hefur fundist á tölvunni þinni, Ég get ekki\n"
+"sett upp þessa tengingu."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Greenland"
-msgstr "Grænland"
+msgid "Windows"
+msgstr "Windows"
 
-#: ../../lang.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Gibraltar"
-msgstr "Gíbraltar"
+msgid "Can't make screenshots before partitioning"
+msgstr "Get ekki tekið skjámyndir fyrr en disksneiðar hafa verið skilgreindar"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Ghana"
-msgstr "Gana"
+msgid "Host Name"
+msgstr "Vélarheiti:"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "French Guiana"
-msgstr "Franska Gínea"
+msgid "/File/Save _As"
+msgstr "/Skrá/Vista _sem"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Georgia"
-msgstr "Georgía"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s er ekki í grunni um myndskanna, stilla handvirkt?"
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "United Kingdom"
-msgstr "Stóra Bretland"
+msgid "Delay before booting default image"
+msgstr "Töf áður en sjálfgefin ræsing byrjar"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Restrict command line options"
+msgstr "Takmarka alla rofa á skipanlínu"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Faroe Islands"
-msgstr "Færeyjar"
+msgid "East Europe"
+msgstr "Austur Evrópa"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Micronesia"
-msgstr "Míkrónesía"
+msgid "Use free space"
+msgstr "Nota laust pláss"
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandseyjar (Malvinas)"
+msgid "use dhcp"
+msgstr "nota dhcp"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Fiji"
-msgstr "Fíjí"
+msgid "Mail alert"
+msgstr "Póstviðvörun"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Finland"
-msgstr "Finnland"
+msgid "Internet configuration"
+msgstr "Internet stillingar"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Ethiopia"
-msgstr "Eþíópía"
+msgid "Uzbekistan"
+msgstr "Úsbekistan"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Spain"
-msgstr "Spánn"
+msgid "Detected %s"
+msgstr "Skyjnaði %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Eritrea"
-msgstr "Erítrea"
+msgid "/Autodetect _printers"
+msgstr "/Finna _prentara sjálfkrafa"
 
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid "Western Sahara"
-msgstr "Vestur Sahara"
+msgid "Finish"
+msgstr "Ljúka"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Egypt"
-msgstr "Egyptaland"
+msgid "Show automatically selected packages"
+msgstr "Sýna sjálfvirkt valda pakka"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Estonia"
-msgstr "Eistland"
+msgid "CPU flags reported by the kernel"
+msgstr "Örgjörvaflögg eins og þau eru gefin upp af kjarna"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
+msgid "Togo"
+msgstr "Tógó"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Algeria"
-msgstr "Algería"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Dominican Republic"
-msgstr "Dóminíska lýðveldið"
+msgid "16 MB"
+msgstr "16 MB"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dominica"
-msgstr "Dominiká"
+msgid "Please try again"
+msgstr "Reyndu aftur"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Denmark"
-msgstr "Danmörk"
+msgid "The model is correct"
+msgstr "Tegundin er rétt"
 
-#: ../../lang.pm:1
+#      ******************************************
+#      *****   Byrjaði hérna 4. jan 2000  *******
+#      ***  ATH: Það er sumt eftir fyrir ofan ***
+#      ******************************************
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Djibouti"
-msgstr "Djibútí"
+msgid "FAT resizing failed: %s"
+msgstr "Breyting á FAT mistókst: %s"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Cyprus"
-msgstr "Kýpur"
+msgid "Individual package selection"
+msgstr "Val á einstökum pökkum"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Christmas Island"
-msgstr "Jólaeyjar"
+msgid "This partition is not resizeable"
+msgstr "Ekki er hægt að breyta stærð á þessarri disksneið"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Cape Verde"
-msgstr "Grænhöfðaeyjar"
+msgid "Location"
+msgstr "Staðsetning"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Cuba"
-msgstr "Kúba"
+msgid "USA (cable-hrc)"
+msgstr "USA (kapal-hrc)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Colombia"
-msgstr "Kólumbía"
+msgid "Journalised FS"
+msgstr "Journalised FS"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cameroon"
-msgstr "Kamerún"
+msgid "Guatemala"
+msgstr "Gvatemala"
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Chile"
-msgstr "Chíle"
+msgid "This machine"
+msgstr "Þessi vél"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cook Islands"
-msgstr "Cook eyjar"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS drifstafur: %s (bara ágiskun)\n"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Switzerland"
-msgstr "Sviss"
+msgid "Bahrain"
+msgstr "Bahrain"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongó (brassaville)"
+msgid "omit scsi modules"
+msgstr "sleppa scsi einingum"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Fjölskylda örgjörva (þ.e. 6 fyrir i686)"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Central African Republic"
-msgstr "Miðafríkulýðveldið"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongó (Kinshasa)"
+msgid "Keyboard layout: %s\n"
+msgstr "Tegund lyklaborðs: %s\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kókos (Keeling) eyjar"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid "Maltese (US)"
+msgstr "Maltneskt (US)"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Belize"
-msgstr "Belís"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Tengir og aftengir allar NFS nettengingar, SMB (Lan Manager\n"
+"/Windows) og NCP (NetWare) tengingar."
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Belarus"
-msgstr "Hvítarússland"
+msgid "Tvcard"
+msgstr "Sjónvarpskort"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Fara í venjulegan ham"
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Size"
+msgstr "Stærð"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet eyja"
+msgid "Greenland"
+msgstr "Grænland"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Bhutan"
-msgstr "Bútan"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bahamas"
-msgstr "Bahamaeyjar"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Brazil"
-msgstr "Brasilía"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Bolivia"
-msgstr "Bólivía"
+msgid "Delete All NBIs"
+msgstr "Eyða öllum NBI"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Bermuda"
-msgstr "Bermúda"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Benin"
-msgstr "Benín"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Hvaða uppsetningu af XFree viltu nota?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Burundi"
-msgstr "Búrúndi"
+msgid "More"
+msgstr "Meira"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Á þessu öryggisstigi er orðið mögulegt að nota tölvuna sem þjón.\n"
+"Öryggið er nógu nógu mikið til að taka við fyrirspurnum frá\n"
+"mörgum biðlum.  Athugið: ef vélin þín er biðlari á Internetinu\n"
+"þá ættir þú að velja lægra öryggisþrep"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Bulgaria"
-msgstr "Búlgaría"
+msgid "Account Password"
+msgstr "Netþjónustu-lykilorð"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Tajik keyboard"
+msgstr "Tajik lyklaborð"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnía og Herzegónía"
+msgid "Font List"
+msgstr "Leturlisti"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Azerbaijan"
-msgstr "Asjerbæjan"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Australia"
-msgstr "Ástralía"
+msgid "Select file"
+msgstr "Veljið skrá"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "American Samoa"
-msgstr "Ameríku Samóeyjar"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Argentina"
-msgstr "Argentína"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Antarctica"
-msgstr "Suðurskautslandið"
+msgid "Japan"
+msgstr "Japan"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Angola"
-msgstr "Angóla"
+msgid "Print option list"
+msgstr "Valkostir á prentara"
 
-#: ../../lang.pm:1
+#: ../../standalone/localedrake:1
 #, c-format
-msgid "Netherlands Antilles"
-msgstr "Holland, Antilleyjar"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
+"Breytingar hafa verið gerðar, en til að virkja þær þá verður þú að stimpla "
+"þig út"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Armenia"
-msgstr "Armenía"
+msgid "Search servers"
+msgstr "Leita að þjónum"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Albania"
-msgstr "Albanía"
+msgid "NCP queue name missing!"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr "Viðvörun, skynja aðra Internettengingum kannski um staðarnetið þitt"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua og Barbuda"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-ROM merkt \"%s\""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "United Arab Emirates"
-msgstr "Sameinuðu Arabísku Furstadæmin"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Geymir og sækir slembitölugrunn kerfis til að bæta gæði\n"
+"slembitalna."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+msgid "Turn your computer into a reliable server"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid " (driver %s)"
+msgstr " (rekill: %s)"
 
-#: ../../loopback.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Circular mounts %s\n"
-msgstr "Hringtenging %s\n"
+msgid ""
+"Loopback file(s):\n"
+"   %s\n"
+msgstr ""
 
-#: ../../lvm.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Fjarlægðu sýndardrifin fyrst\n"
+msgid "I don't know"
+msgstr "Ég veit ekki"
 
-#: ../../modules.pm:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP vél \"%s\", gátt %s"
+
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "Hreyfðu hjólið!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Kortið þitt notar rekilinn %s\"%s\" (sjálfgefið fyrir kortið þitt er \"%s\")"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Til að virkja músina,"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Hætta innsetningu"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Please test the mouse"
-msgstr "Vinsamlega prófaðu músina"
+msgid " ("
+msgstr " ("
 
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "No mouse"
-msgstr "Engin mús"
+msgid "Cpuid level"
+msgstr "Örgjörvaþrep"
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "none"
-msgstr "ekkert"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongólskt (kýrílskt)"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "3 buttons"
-msgstr "3 hnappar"
+msgid "Add a module"
+msgstr "Bæta við einingu"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "2 buttons"
-msgstr "2 hnappar"
+msgid "Profile to delete:"
+msgstr "Snið sem á að eyða:"
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "1 button"
-msgstr "1 hnappur"
+msgid "Local measure"
+msgstr "Staðvær mæling"
 
 #: ../../mouse.pm:1
 #, c-format
 msgid "busmouse"
 msgstr "busmús"
 
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Netþjónustu-notandanafn"
 
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mús (raðtengd, gömul C7 tegund)"
+msgid "Fdiv bug"
+msgstr "Fdiv villa"
 
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
+"drakfirewall uppsetning\n"
+"\n"
+"Vertu viss um að hafa sett upp Staðarnet/Internet aðgangur með drakconnect "
+"áður en lengra er haldið."
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Benin"
+msgstr "Benín"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Uruguay"
+msgstr "Úrúgvæ"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Path selection"
+msgstr "Val á slóð"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Name/IP address of host:"
+msgstr "Nafn/IP-vistfang vélar:"
 
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Skjár: %s\n"
 
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
 #, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Eitthvað slæmt er að gerast á disknum þínum.\n"
+"Féll á prófi þar sem athugað var samræmi á \n"
+"gögnum á disknum\n"
+"Það þýðir að allt sem þú skrifar á diskinn endar á\n"
+"óvissum stað 'einhverstaðar' sem ruglar málin en meir!"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Printer host name or IP missing!"
+msgstr "vélarnafn prentara-vélar eða IP vantar!"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Almenn þriggja hnappa mús"
+msgid "Please check all users that you want to include in your backup."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Almenn 2 hnappa mús"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
+"%s verður að vera uppsettur af prinerdrake.\n"
+"Þú getur ræst printerdrake frá Mandrake stjórnborðinu í vélbúnaðar- "
+"uppsetningahluta"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "serial"
-msgstr "raðtengd"
+msgid "Bangladesh"
+msgstr "Bangladesh"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "Japan (cable)"
+msgstr "Japan (kapal)"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Wheel"
-msgstr "Hjól"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Generic"
-msgstr "Almenn"
+msgid "Initial tests"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Continue"
+msgstr "Áfram"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Custom Restore"
+msgstr "Sérsniðin endurheimt"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Almenn PS2 hjól-mús"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Script-based"
+msgstr "Með skriftu"
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "Standard"
-msgstr "Venjuleg"
+msgid "Error reading file %s"
+msgstr "Villa við lestur úr skránni %s"
 
-#: ../../mouse.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - mús"
+msgid "PLL setting:"
+msgstr "PLL stilling:"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
 #, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Víxla milli flats lista og raðaðra hópa"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Þú verður að hafa FAT disksneið tengda í /boot/efi"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Collapse Tree"
-msgstr "Loka tré"
+msgid " on "
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Expand Tree"
-msgstr "Opna tré"
+msgid "The URL must begin with http:// or https://"
+msgstr "Slóðin verður að byrja á http:// eða https://"
 
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Info"
-msgstr "Upplýsingar"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Is this correct?"
-msgstr "Er þetta rétt?"
+msgid "Other OS (SunOS...)"
+msgstr "Öðru stýrikerfi (SunOS...)"
 
-#: ../../my_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Install/Upgrade"
+msgstr "Innsetning/Uppfærsla"
 
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Error writing to file %s"
-msgstr "Villa við að skrifa í skrána %s"
+msgid "%d packages"
+msgstr "%d pakkar"
 
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Bad backup file"
-msgstr "Skemmd afritsskrá"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default             : save default directories.\n"
+"--debug               : show all debug messages.\n"
+"--show-conf           : list of files or directories to backup.\n"
+"--config-info         : explain configuration file options (for non-X "
+"users).\n"
+"--daemon              : use daemon configuration. \n"
+"--help                : show this message.\n"
+"--version             : show version number.\n"
+msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Villa við lestur úr skránni %s: %s"
+msgid "Domain Authentication Required"
+msgstr "Lénsauðkenningar er þörf"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
-"Það er gat í sneiðatöflunni þinni sem ekki er hægt að nota.\n"
-"Eina lausnins er að færa aðalsneiðar svo að gatið verði við hliðina á "
-"viðbótasneið"
 
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Extended partition not supported on this platform"
-msgstr ""
+msgid "Costa Rica"
+msgstr "Kosta Ríka"
 
-#: ../../partition_table.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "mount failed: "
-msgstr "tókst ekki að tengja: "
+msgid "Use libsafe for servers"
+msgstr "Nota libsafe fyrir þjóna"
 
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "maybe"
-msgstr "kannski"
+msgid "Icelandic"
+msgstr "Íslenskt"
 
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "nice"
-msgstr "þægilegt"
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Notkun: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
 
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "very nice"
-msgstr "mjög þægilegt"
+msgid "Please relog into %s to activate the changes"
+msgstr "Stimplaðu þig aftur inn í %s til að virkja breytingarnar"
 
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
 #, c-format
-msgid "important"
-msgstr "áríðandi"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
 
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "must have"
-msgstr "verð að fá"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub hamur"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ekki nógu margar disksneiðar fyrir RAID %d\n"
+msgid "Output"
+msgstr "Úttak"
 
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "mkraid failed"
-msgstr "mkraid mistókst"
+msgid "Circular mounts %s\n"
+msgstr "Hringtenging %s\n"
 
-#: ../../raid.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid mistókst (kannski vantar raidtólin?)"
+msgid "Martinique"
+msgstr "Martiník"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Get ekki bætt við sneið á _forsniðinn_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Stop"
-msgstr "Stöðva"
+msgid "a number"
+msgstr "tala"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Start"
-msgstr "Ræsa"
+msgid "Swedish"
+msgstr "Sænskt"
 
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "On boot"
-msgstr "Við ræsingu"
+msgid "Which %s driver should I try?"
+msgstr "Hvaða %s rekil viltu prófa?"
 
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
 msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Þú fært póst ef ein af eftirfarandi þjónustum eru ekki lengur keyrandi"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Filesystem types:"
+msgstr "Tegundir skráakerfa:"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", multi-function device on HP JetDirect"
 msgstr ""
-"Engar aukalegar upplýsingar\n"
-"um þetta tæki, því miður."
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Services and deamons"
-msgstr "Þjónustur og púkar"
+msgid "Northern Mariana Islands"
+msgstr "Norður Maríanaeyjar"
 
-#: ../../services.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "stopped"
-msgstr "stöðvað"
+msgid "none"
+msgstr "ekkert"
 
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "running"
-msgstr "keyrandi"
+msgid "user :"
+msgstr "Notand i:"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Veldu þær þjónustur sem skal sjálfkrafa keyra við ræsingu"
+msgid "Please enter your password"
+msgstr "Sláðu inn þitt lykilorð"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Database Server"
-msgstr "Gagnagrunnsmiðlari"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Remote Administration"
-msgstr "Fjarvinnsla"
+msgid "Floppy"
+msgstr "Disklingadrif"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "File sharing"
-msgstr "Skráarmiðlun"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Krossaðu hér við ef þú vilt eyða gögnum á RW miðli (1. sinn)"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Ghostscript referencing"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printing"
-msgstr "Prentun"
+msgid "Bootloader"
+msgstr "Ræsistjóri"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Ræsa X leturþjón (þetta verður að vera til að XFree keyri)"
+msgid "Move"
+msgstr "Færa"
 
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Hlaða inn reklum fyrir USB tæki."
+msgid "Bootloader to use"
+msgstr "Ræsiforrit sem á að nota"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog er kerfisþjónusta sem mörg forrit nota til að skrá skilaboð\n"
-"í ýmsa kerfisannála.. Það er góð hugmynd að hafa syslog alltaf keyrandi."
+msgid "SMB server host"
+msgstr "Heiti SMB þjóns"
 
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Ræsa hljóðkerfi fyrir vélina þína"
+msgid "Name Servers:"
+msgstr "Nafnaþjónar:"
 
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
 msgstr ""
-"rwho gefur fjarstöddum notendum lista af notendum sem eru\n"
-"stimplaðir inn á vélina (svipað finger)."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
 msgstr ""
-"rusers leyfir notendum á neti að athuga hverjir hafa stimplað sig\n"
-"inn á viðkomandi vélar."
 
 #: ../../services.pm:1
 #, c-format
 msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"rstat samskiptareglan leyfir notendum á neti að sækja\n"
-"upplýsingar um afköst annarra véla á netinu."
+"Linux Virtual Server, notað til að byggja öflugan skráarmiðlara\n"
+"með háan uppitíma."
 
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
+msgid "4 billion colors (32 bits)"
+msgstr "4 miljarðar lita (32 bits)"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
+msgid "Micronesia"
+msgstr "Míkrónesía"
 
-#: ../../services.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Geymir og sækir slembitölugrunn kerfis til að bæta gæði\n"
-"slembitalna."
+msgid "License"
+msgstr "Notkunarskilmálar"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "This may take a moment to generate the keys."
 msgstr ""
-"Postfix er póstflutningskerfi, sem flytur tölvupóst frá einni vél til "
-"annarrar."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
 msgstr ""
-"portmapper sér um RPC tengingar sem eru notaðar af NIS og NFS\n"
-"portmap þjónustan verður að vera keyrandi fyrir vélar sem á eru\n"
-"þjónustur sem byggja á RPC samskiptum."
 
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (notar pppoa) usb"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
 msgstr ""
-"PCMCIA þjónusta er venjulega til að styðja við hluti eins og netkort\n"
-"og mótöld á ferðavélum.  Þessi þjónusta fer ekki af stað nema hún sé\n"
-"stillt svo það er í lagi að hafa þetta á vélum sem þarfnast þess ekki."
+"Það kom upp villa. Engin tæki fundust sem unnt er að búa til ný skráakerfi "
+"á. Vinsamlegast athugaðu vélbúnaðinn í leit að orsök vandamálsins."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Stuðningur fyrir OKI 4w og sambærilega Windows prentara."
+msgid "Starting the printing system at boot time"
+msgstr "Ræsa prentkerfi við kerfisræsingu"
 
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "Setja sjálfkrafa á NumLock í skjáhermi og við ræsingu"
+msgid "Do you want to start the connection at boot?"
+msgstr "Viltu ræsa nettengingarnar þegar kerfi ræsir?"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er vinsæl aðferð til skráarmiðlunar yfir TCP/IP net.\n"
-"Þessi þjónusta bætir skráarlæsingum við NFS."
+msgid "Processor ID"
+msgstr "ID örgjörva"
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er vinsæl aðferð til skráarmiðlunar yfir TCP/IP net.\n"
-"Þessi þjónusta veitir NFS skráamiðlun, sem er stillt í\n"
-"/etc/exports skránni."
+msgid "Sound trouble shooting"
+msgstr "Vandamálaleit hljóðkorta"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Virkjar eða aftengir öll nettengi skilgreind til að ræsast\n"
-"þegar kerfi er ræst."
+msgid "Polish (qwerty layout)"
+msgstr "Pólskt (qwerty)"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Tengir og aftengir allar NFS nettengingar, SMB (Lan Manager\n"
-"/Windows) og NCP (NetWare) tengingar."
+msgid "activate now"
+msgstr "virkja núna"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
 msgstr ""
-"named (BIND) er nafnaþjónusta fyrir net (DNS) sem varpar netnafni yfir í IP-"
-"vistföng."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
 msgstr ""
-"Linux Virtual Server, notað til að byggja öflugan skráarmiðlara\n"
-"með háan uppitíma."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er prentþjónn sem lpr þarfnast til að geta unnið sín verk.\n"
-"Þetta er í grunni þjónn sem deilir prentverkum á prentara."
+msgid "Host \"%s\", port %s"
+msgstr "Vél \"%s\", gátt %s"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
+msgid "This partition can't be used for loopback"
+msgstr "Það er ekki hægt að nota þessa sneið fyrir sýndardisk"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
+msgid "File already exists. Use it?"
+msgstr "Skráin er þegar til, nota hana?"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
+msgid "received: "
+msgstr "móttók: "
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
+msgid "Right Alt key"
+msgstr "Hægri Alt lykill"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
+msgid "the list of alternative drivers for this sound card"
+msgstr "listi af aukareklum fyrir þetta hljóðkort"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
+msgid "Gateway"
+msgstr "Gátt"
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache er vefmiðlari, sem veitir aðgang að HTML skjölum og CGI."
+msgid "Scanner sharing"
+msgstr "Miðlun myndskanna"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr "HardDrake athugar vélbúnað og stillir ný og breytt jaðartæki."
+msgid "Tonga"
+msgstr "Tonga"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM veitir músarstuðning til forrita sem keyra í textaham Linux\n"
-"s.s. Midnight Commander.  Það veitir líka möguleika á að klippa\n"
-"og líma og valseðlaþjónustu í textaham."
+msgid "Tunisia"
+msgstr "Túnis"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
+msgid "Profile: "
+msgstr "Snið: "
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "Smelltu á tæki í vinstri glugganum til að birta upplýsingar hér"
 
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "XawTV isn't installed!"
+msgstr "XawTV er ekki sett upp!"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Anacron is a periodic command scheduler."
+msgid "Do not include critical files (passwd, group, fstab)"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
+msgid "old static device name used in dev package"
+msgstr "eldri föst tækisnöfn sem eru notuð í dev pakkanum"
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installing packages..."
-msgstr "Set inn pakka..."
+msgid "This label is already used"
+msgstr "Þetta nafn er nú þegar í notkun."
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
+"Welcome to the Printer Setup Wizard\n"
 "\n"
-"Notkun: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr ""
-" [allt]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+"Eftir að diskssneið %s hefur verið forsniðin, hafa öll gögn á þessari "
+"disksneið tapast"
 
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Connection Time: "
+msgstr "Tengitími: "
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgid "select perm file to see/edit"
 msgstr ""
-"[OPTION]...\n"
-"  --no-confirmation      Ekki biðja um staðfestingu í upphafi "
-"MandrakeUpdate\n"
-"  --no-verify-rpm        Ekki staðfesta undiskriftir pakka\n"
-"  --changelog-first      Birta breytingalista á undan skráarlista í "
-"lýsingaglugga\n"
-"  --merge-all-rpmnew     Bjóðast til að bræða saman allar .rpmnew/.rpmsave "
-"skrár"
 
-#: ../../standalone.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr ""
+"Vinsamlega settu uppsetningar-geisladiskinn í geisladrifið og ýttu á 'Í "
+"lagi' þegar þú \n"
+"ert búinn. Ef þú hefur hann ekki ýttu þá á 'Hætta við' til að forðast "
+"uppfærslu yfir net."
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "Use group id for execution"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Choose the default user:"
+msgstr "Veldu sjálfgefinn notanda:"
 
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "[keyboard]"
-msgstr "[Lyklaborð]"
+msgid "Gabon"
+msgstr "Gabon"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
-msgstr ""
+msgid "Domain"
+msgstr "Lén"
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Nákvæm stærð vinnsluminnis (fann %d MB)"
 
-#: ../../standalone.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
 msgstr ""
 
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Exit install"
-msgstr "Hætta innsetningu"
+msgid "Provider dns 2 (optional)"
+msgstr "Nafnamiðlari 2 (ekki krafist)"
 
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Install updates"
-msgstr "Setja inn uppfærslur"
+msgid "Boot device"
+msgstr "Ræsitæki"
 
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure services"
-msgstr "Setja upp þjónustur"
+msgid "Which partition do you want to resize?"
+msgstr "Hvaða disksneið viltu breyta stærð á?"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure X"
-msgstr "Stilla X"
+msgid "United States Minor Outlying Islands"
+msgstr "Bandaríkin, smærri eyjar"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Install bootloader"
-msgstr "Setja inn ræsihlaðara"
+msgid "A tool to monitor your logs"
+msgstr "Tól til að fylgjast með annálum"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure networking"
-msgstr "Stilla nettengingu"
+msgid "Djibouti"
+msgstr "Djibútí"
 
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Add a user"
-msgstr "Bæta við notanda"
+msgid "detected on port %s"
+msgstr "fundin á tengi %s"
 
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Root password"
-msgstr "Rótar-lykilorð"
+msgid "LPD"
+msgstr "LPD"
 
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Install system"
-msgstr "Setja kerfið inn"
+msgid "Graphics card: %s\n"
+msgstr "Skjákort: %s\n"
 
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "Veldu pakka til að setja inn"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Format partitions"
-msgstr "Forsníða disksneiðar"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Krossaðu hér við ef þú ert að nota DVDRAM tæki"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Partitioning"
-msgstr "Disksneiðing"
+msgid "Splash selection"
+msgstr "Val á smelliglugga"
 
-#: ../../steps.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Choose your keyboard"
-msgstr "Veldu lyklaborð"
+msgid "Extended partition not supported on this platform"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Select installation class"
-msgstr "Veldu innsetningarflokk"
+msgid "ISDN Configuration"
+msgstr "ISDN uppsetning"
 
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "Leita að hörðum disk(um)"
+msgid "high"
+msgstr "Hátt"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Configure mouse"
-msgstr "Tilgreindu mús"
+msgid "Internet Connection Sharing"
+msgstr "Samnýting Internets tengingar"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "License"
-msgstr "Notkunarskilmálar"
+msgid "Choose file"
+msgstr "Veldu skrá"
 
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Language"
-msgstr "Veldu tungumál"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
 
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Keyri upp netið"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "OK"
-msgstr "Í lagi"
+msgid "Printer default settings"
+msgstr "Sjálfgefin stilling prentara"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Almenn PS2 hjól-mús"
 
-#: ../../ugtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Removing old printer \"%s\"..."
+msgstr "Fjarlægi gamlan prentara \"%s\"..."
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
+msgid "Select a device !"
+msgstr "Veldu tæki !"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
+msgid "Remove selected server"
+msgstr "Fjarrlægja valinn prentara"
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
+msgid "French Southern Territories"
+msgstr "Frönsku suðureyjar"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
+msgid "the vendor name of the processor"
+msgstr "örgjörvanafn framleiðanda"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "XFree %s with 3D hardware acceleration"
+msgid "All data on this partition should be backed-up"
+msgstr "Öll gögn á þessari disksneið ætti að afrita"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Installing package %s"
+msgstr "Set inn pakka %s"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking device and configuring HPOJ..."
 msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
 msgstr ""
+"Til að fá fleiri disksneiðar, vinsamlega eyddu einni til að búa til "
+"viðbótarsneið"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
 msgstr ""
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Choose packages to install"
+msgstr "Veldu pakka til að setja inn"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Stilla aðeins kort \"%s\"%s"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Use Xinerama extension"
-msgstr ""
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Allar disksneiðar og öll gögn á diski %s  tapast"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Configure all heads independently"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
 msgstr ""
+"Það er ekki nægilegt pláss á kerfinu þínu fyrir uppsetningu eða uppfærslu (%"
+"d > %d)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvaða uppsetningu af XFree viltu nota?"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "XFree uppsetning"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Veldu minnisstærð skjákortsins"
+msgid "Bhutan"
+msgstr "Bútan"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Kerfið styður við marga skjái samtímis.\n"
-"Hvað viltu gera?"
+msgid "Network interface"
+msgstr "Nettengi"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Multi-head configuration"
-msgstr "Fjölskjáa-uppsetning"
+msgid "Reading printer data..."
+msgstr "Les prentara-upplýsingar..."
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose an X server"
-msgstr "Veldu X miðlara"
+msgid "Korean keyboard"
+msgstr "Kóreskt lyklaborð"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "X server"
-msgstr "X miðlari"
+msgid "Not connected"
+msgstr "Ótengdur"
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64 MB eða meira"
+msgid "Greek"
+msgstr "Grískt"
 
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts og Nevis"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Enable OF Boot?"
+msgstr "Virkja OF ræsingu?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Þú getur ekki notað JFS á disksneiðar minni en 16MB"
 
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Lóðrétt tíðni skjás: %s\n"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "path"
+msgstr "slóð"
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Mount point"
+msgstr "Tengipunktur"
 
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
 msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
 msgstr ""
-"Vista stillingar?\n"
-"núverandi stilling er:\n"
-"\n"
-"%s"
-
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Valkostir"
+"Villa kom  upp:\n"
+"%s\n"
+"Reyndu að breyta einhverjum stillingum"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Test"
-msgstr "Prófa"
+msgid "Restore system"
+msgstr "Endurheimta kerfið"
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Resolution"
-msgstr "Upplausn"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Þetta eru vélarnar sem deila sínum staðbundnu myndskönnum, og ættu því að "
+"vera aðgengilegir:"
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Monitor"
-msgstr "Skjár"
+msgid "The DHCP end ip"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Graphic Card"
-msgstr "Skjákort"
+msgid "Another one"
+msgstr "Önnur"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "Lóðrétt tíðni"
+msgid "Drakbackup"
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "Lárétt tíðni"
+msgid "Colombia"
+msgstr "Kólumbía"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
 "\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
 msgstr ""
-"Hér þarf að gefa upp 'horizontal sync' tíðni skjásins þíns. Þú getur\n"
-"valið tíðnisvið að neðan sem passar við staðlaða skjái eða gefið upp\n"
-"eitthvað annað.\n"
-"\n"
-"það er MJÖG MIKILVÆGT að velja ekki of hátt tíðnisvið fyrir skjáinn. Hafir\n"
-"þú einhverjar efasemdir, veldu þá lægri stillingar."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Plug'n Play skönnun mistókst, vinsamlega veldu réttan skjá"
-
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "Framleiðandi"
 
 #: ../../Xconfig/monitor.pm:1
 #, c-format
 msgid "Plug'n Play"
 msgstr "Plug'n Play"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "Veldu skjá"
+msgid "Reunion"
+msgstr "Reunion"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "Skjákort: %s"
+msgid "Details"
+msgstr "Ítarlegar"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Veldu upplausn og fjölda lita"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Af öryggisástæðum verður aftengt núna."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Resolutions"
-msgstr "Upplausnir"
+msgid "Synchronization tool"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljarðar lita (32 bits)"
+msgid "Checking your system..."
+msgstr "Athuga tölvuna þína..."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miljón litir (24 bits)"
+msgid "Print"
+msgstr "Prenta"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 þúsund litir (16 bits)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 þúsund litir (15 bits)"
+msgid "Mongolia"
+msgstr "Mongólía"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 litir (8 bits)"
+msgid "Mounted\n"
+msgstr "Tengdur\n"
 
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Er þetta rétt stilling?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafískt viðmót"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Leaving in %d seconds"
-msgstr "Hætti eftir %d sekúndur"
+msgid "Restore Users"
+msgstr "Endurheimta notendur"
 
-#: ../../Xconfig/test.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Mismunandi lykilorð"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
 msgstr ""
-"Villa kom  upp:\n"
-"%s\n"
-"Reyndu að breyta einhverjum stillingum"
+"portmapper sér um RPC tengingar sem eru notaðar af NIS og NFS\n"
+"portmap þjónustan verður að vera keyrandi fyrir vélar sem á eru\n"
+"þjónustur sem byggja á RPC samskiptum."
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Viðvörun: Prófun á þessu skjákorti gæti fryst tölvuna þína"
+msgid "Detected hardware"
+msgstr "fundinn vélbúnaður"
 
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Viltu prófa stillingarnar?"
+msgid "Mauritius"
+msgstr "Máritus"
 
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "Prófun á stillingum"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Búrmenskt)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "What norm is your TV using?"
-msgstr "Hvaða staðal notar sjónvarpið þitt?"
+msgid "Enabling swap partition %s"
+msgstr "Virkja diskminni á disksneið %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
 msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "Armenskt (gamalt)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
 msgstr ""
-"Ég get stillt tölvuna þína til að kveikja sjálfvirkt á X við ræsingu\n"
-"Vilt þú kveikja á X við endurræsingu?"
 
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Graphical interface at startup"
-msgstr "Grafískt viðmót í ræsingu"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 rekill: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ", vél \"%s\", gátt %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 miðlari: %s\n"
+msgid "Monaco"
+msgstr "Mónakó"
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "Upplausnir: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "%s forsniðið á %s mistókst"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "Litadýpt: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Skipting disks í sneiðar mistókst: %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Skjákortsminni: %s kB\n"
+msgid "Canada (cable)"
+msgstr "Kanada (kapal)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Uppfæra %s"
+
+#: ../../help.pm:1
 #, c-format
-msgid "Graphics card: %s\n"
-msgstr "Skjákort: %s\n"
+msgid "Workstation"
+msgstr "Vinnustöð"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Lóðrétt tíðni skjás: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Set inn pakka %s\n"
+"%d%%"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Lárétt tíðni skjás: %s\n"
+msgid "Kyrgyzstan"
+msgstr "Kirgistan"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Með grunn handbókum (mælt með!)"
+
+#: ../../services.pm:1
 #, c-format
-msgid "Monitor: %s\n"
-msgstr "Skjár: %s\n"
+msgid "Anacron is a periodic command scheduler."
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mús: %s\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Þú verður að hafa rótarsneið fyrir Linux.  Búðu því annaðhvort\n"
+"til rótarsneið eða veldu sneið sem nú þegar er til á disknum.\n"
+"Veldu síðan ``Tengipunktur'' og sláðu inn `/'"
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tegund músar: %s\n"
+msgid "Proxy should be http://..."
+msgstr "Sel ætti að vera http://..."
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tegund lyklaborðs: %s\n"
+msgid "South Africa"
+msgstr "Suður Afríka"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Options: %s"
-msgstr "Valkostir: %s"
+msgid "Western Sahara"
+msgstr "Vestur Sahara"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Mount point: "
-msgstr "Tengipunktur: "
+msgid "Etherboot Floppy/ISO"
+msgstr "Netræsi- disklingur/ISO"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Server: "
-msgstr "Þjónn: "
+msgid "Modify printer configuration"
+msgstr "Breyta prentarastillingum"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Slóðin verður að byrja á http:// eða https://"
+msgid "Choose a partition"
+msgstr "Veldu disksneið"
 
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Hvernig mús ertu með?"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Edit current rule"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Mount point"
-msgstr "Tengipunktur"
+msgid "%s"
+msgstr "%s"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Server"
-msgstr "Þjónn"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Mount"
-msgstr "Tengipunktur"
+msgid "Please test the mouse"
+msgstr "Vinsamlega prófaðu músina"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Unmount"
-msgstr "Aftengja"
+msgid "Other Media"
+msgstr "Annar miðill"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "New"
-msgstr "Ný"
+msgid "Backup system files"
+msgstr "Afrita kerfisskrár"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Use ``%s'' instead"
-msgstr "Nota ``%s'' í staðinn"
+msgid "Sector"
+msgstr "Geiri"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Type"
-msgstr "Tegund"
+msgid "Qatar"
+msgstr "Kvatar"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Nota ``Aftengja'' fyrst"
+msgid "LDAP Base dn"
+msgstr "LDAP Grunn DN"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Delete"
-msgstr "Eyða"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Þú getur ekki valið þennan pakka því það er ekki nægilegt pláss"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Búa til diskling fyrir sjálfvirka uppsetningu"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Create"
-msgstr "Búa til"
+msgid "Dialing mode"
+msgstr "Hringihamur"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Filesystem types:"
-msgstr "Tegundir skráakerfa:"
+msgid "File sharing"
+msgstr "Skráarmiðlun"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Empty"
-msgstr "Tóm"
+msgid "Clean /tmp at each boot"
+msgstr "Hreinsa /tmp við hverja ræsingu"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "Malawi"
+msgstr "Malaví"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Please choose your type of mouse."
+msgstr "Hvernig mús ertu með?"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "class of hardware device"
+msgstr "flokkur vélbúnaðar"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Swap"
-msgstr "Diskminni"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid "United Kingdom"
+msgstr "Stóra Bretland"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "running"
+msgstr "keyrandi"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "No hard drives found"
-msgstr "Engir harðir diskar fundust"
+msgid "default"
+msgstr "sjálfgefið"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "Smelltu á disksneið"
+msgid "Indonesia"
+msgstr "Indónesía"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Þú hefur eina stóra FAT disksneið.\n"
-"(venjulega notuð af Microsoft DOS/Windows).\n"
-"Ég legg til að þú endursníðir hana\n"
-"(smelltu á hana, síðan á \"Endursníða\")"
+msgid "France [SECAM]"
+msgstr "Frakkland [SECAM]"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Choose action"
-msgstr "Veldu aðgerð"
+msgid "restrict"
+msgstr "takmarka"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Wizard"
-msgstr "Álfur"
+msgid "must have"
+msgstr "verð að fá"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
 msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please make a backup of your data first"
-msgstr "Vinsamlega taktu fyrst afrit af öllum gögnum"
+msgid "Senegal"
+msgstr "Senegal"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Read carefully!"
-msgstr "Lestu vandlega!"
+msgid "Command line"
+msgstr "Skipanalína"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "Encryption key (again)"
-msgstr "Dulritunarlykill (aftur)"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Encryption key"
-msgstr "Dulritunarlykill"
+msgid "access to administrative files"
+msgstr "aðgengi að stýrikerfisskrám"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The encryption keys do not match"
-msgstr "Dulritunarlyklarnir eru mismunandi"
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Veldu dulritunarlykil fyrir skráarkerfið"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Filesystem encryption key"
-msgstr "Dulritunarlykill skráakerfis"
+msgid "Montserrat"
+msgstr "Montserrat"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Type: "
-msgstr "Tegund: "
+msgid "Automatic dependencies"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "on channel %d id %d\n"
-msgstr "á gagnabraut %d id %d\n"
+msgid "Swap"
+msgstr "Diskminni"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Partition table type: %s\n"
-msgstr "Disksneiðartöflu tegund: %s\n"
+msgid "Connecting to the Internet "
+msgstr "Tengjast internetinu "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskar %s\n"
+msgid "Restore Other"
+msgstr "Endurheimta annað"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Info: "
-msgstr "Upplýsingar: "
+msgid "TV card"
+msgstr "Sjónvarpskort"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Skilgreining: %s sívalningar, %s hausar, %s geirar\n"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Prentari á SMB/Windows 95/98/NT miðlara"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Size: %s\n"
-msgstr "Stærð: %s\n"
+msgid ", "
+msgstr ", "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Read-only"
-msgstr "Ritvarið"
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Device: "
-msgstr "Tæki: "
+msgid "Remove selected host/network"
+msgstr "Fjarlægja valda vél/net"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
 msgstr ""
+"Postfix er póstflutningskerfi, sem flytur tölvupóst frá einni vél til "
+"annarrar."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Disconnection from the Internet failed."
+msgstr "Aftenging frá Internetinu mistókst."
+
+#: ../../keyboard.pm:1
 #, c-format
 msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
 msgstr ""
+"Hér getur þú valið lykla eða lyklasamsetningar sem skipta \n"
+"milli mismunandi lykilboðsuppsetninga (t.d íslenskt/enskt)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Netstillingar"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Loopback file name: %s"
+msgid "if set to yes, reports check result to tty."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskar %s\n"
+msgid "Restore From CD"
+msgstr "Endurheimta frá CD"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Chunk size %s\n"
-msgstr "Hlunkastærð %s\n"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Level %s\n"
-msgstr "Stig %s\n"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Veldu hvaða netkort þú notar til að tengjast Internetinu."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
+msgid "Photo memory card access on your HP multi-function device"
 msgstr ""
-"Sjálfgefin disksneið ræst\n"
-"    (fyrir MS-DOS ræsingu, ekki fyrir LILO)\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
 msgid ""
-"Loopback file(s):\n"
-"   %s\n"
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Samnýting Internets tengingar er nú aftengd"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Mounted\n"
-msgstr "Tengdur\n"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Not formatted\n"
-msgstr "Ekki forsniðinn\n"
+msgid "Latin American"
+msgstr "Suður amerískt"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "Forsniðinn\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Breyta prentkerfinu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sívalningur %d til %d\n"
+msgid "Old device file"
+msgstr "Eldri tækisskrá"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", %s sectors"
-msgstr ", %s geirar"
+msgid "Info: "
+msgstr "Upplýsingar: "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Size: %s"
-msgstr "Stærð: %s"
+msgid "Button `%s': %s"
+msgstr "Hnappur %s': %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Start: sector %s\n"
-msgstr "Byrja: geiri %s\n"
+msgid "Please wait"
+msgstr "Augnablik..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Name: "
-msgstr "Nafn: "
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS drifstafur: %s (bara ágiskun)\n"
+msgid "None"
+msgstr "Enginn"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "partition %s is now known as %s"
-msgstr "disksneið %s er þekkt sem %s"
+msgid "The entered IP is not correct.\n"
+msgstr "Uppgefið IP-vistfang er ekki rétt.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Removing %s"
-msgstr "Fjarlægi %s"
+msgid "Ethernet Card"
+msgstr "Ethernet-kort"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Copying %s"
-msgstr "Afrita %s"
+msgid "Info"
+msgstr "Upplýsingar"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Moving files to the new partition"
-msgstr "Færi skrár á nýju disksneiðina"
+msgid "Install"
+msgstr "Innsetning"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
 msgstr ""
-"Mappa %s inniheldur nú þegar gögn\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Fela skrár"
+"Smelltu á \"Næsta ->\" ef þú vilt eyða öllum gögnum og disksneiðum\n"
+"á þesum harða disk.  Varúð! Eftir að þú hefur smellt á \"Næsta ->\", getur\n"
+"þú ekki endurheimt nein gögn eða disksneiðar sem eru nú á þessum diski,\n"
+"Þar með talin Windows gögn.\n"
+"\n"
+"Smelltu á \"<-Fyrri\" til að stöðva þessa aðgerð án þess að tapa gögnum\n"
+"og disksneiðum sem nú eru á þessum harða diski."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Move files to the new partition"
-msgstr "Flytja skrár á nýju disksneiðina"
+msgid "Exit install"
+msgstr "Hætta innsetningu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
 msgstr ""
-"Eftir að diskssneið %s hefur verið forsniðin, hafa öll gögn á þessari "
-"disksneið tapast"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Þú þarft að endurræsa áður en breytingar taka gildi"
+msgid "Remote CUPS server"
+msgstr "Fjarlægur CUPS þjónn"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Disksneiðatafla drifs %s mun verða skrifuð á disk!"
+msgid "Sun - Mouse"
+msgstr "Sun - mús"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Pakka %s er þörf, setja hann inn?"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "What type of partitioning?"
-msgstr "Hvaða tegund af disksneiðingu?"
+msgid "Minimal install"
+msgstr "Minimal uppsetning"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Varaðu þig: þessi aðgerð er hættuleg."
+msgid "Ethiopia"
+msgstr "Eþíópía"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "chunk size"
-msgstr "stærð hlutar"
+msgid "Devanagari"
+msgstr "Devanagari"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "level"
-msgstr "stig"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- pci tæki: hér er skráð PCI rauf, tæki og tegund þessa spjalds\n"
+"- eide tæki: tækið er annað hvort herra eða þræll (master/slave)\n"
+"- scsi tæki: scsi braut og scsi device númer"
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "device"
-msgstr "tæki"
+msgid "Total size: %d / %d MB"
+msgstr "Heildarstærð: %d / %d MB"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Various"
-msgstr "Ýmislegt"
+msgid "disabled"
+msgstr "óvirkt"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Mount options"
-msgstr "Tengistillingar"
+msgid "Search for new scanners"
+msgstr "Leita að tiltækum myndskönnum"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "Skráin er þegar til, nota hana?"
+msgid "Disabling servers..."
+msgstr "Aftengi miðlara..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Give a file name"
-msgstr "Gefðu upp skráarnafn"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Filesystem type: "
-msgstr "Tegund skráakerfis:"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size in MB: "
-msgstr "Stærð í MB: "
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "Skráarnafn sýndardisks: "
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Innsetning %s brást sökum eftirfarandi villu:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Loopback"
-msgstr "Sýndardiskur"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Það er ekki hægt að nota þessa sneið fyrir sýndardisk"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "LVM name?"
-msgstr "LVM nafn?"
+msgid "Network printer (TCP/Socket)"
+msgstr "Net prentari (TCP/Sökkull)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "new"
-msgstr "ný"
+msgid "Backup User files..."
+msgstr "Afrita skrár notanda..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Veldu LVM sem til er fyrir til að bæta við"
+msgid "Install system"
+msgstr "Setja kerfið inn"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Veldu RAID sem til er fyrir til að bæta við"
+msgid "First DNS Server (optional)"
+msgstr "Aðal nafnamiðlari (ekki krafist)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Moving partition..."
-msgstr "Færi disksneið..."
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Moving"
-msgstr "Færi"
+msgid "dhcpd Config..."
+msgstr "dhcpd uppsetning..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Hvaða geira viltu færa gögn til?"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Sector"
-msgstr "Geiri"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub uppsetning"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Hvaða disk viltu færa til?"
+msgid "Israeli"
+msgstr "Ísraelskt"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Move"
-msgstr "Færa"
+msgid "load setting"
+msgstr "álagsstillingar"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New size in MB: "
-msgstr "Stærð í MB: "
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Prentari \"%s\" á miðlara \"%s\""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Choose the new size"
-msgstr "Veldu nýja stærð"
+msgid "Floppy can be removed now"
+msgstr "Það má fjarlægja diskling núna"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "Breyta stærð"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimal uppsetning"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Eftir stærðarbreytingu á sneið %s, hafa öll gögn á þessari disksneið tapast"
+msgid "Denmark"
+msgstr "Danmörk"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Öll gögn á þessari disksneið ætti að afrita"
+msgid "Moving partition..."
+msgstr "Færi disksneið..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "This partition is not resizeable"
-msgstr "Ekki er hægt að breyta stærð á þessarri disksneið"
+msgid "(This) DHCP Server IP"
+msgstr "Vistfang (þessa) DHCP miðlara"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Reikna takmarkanir FAT skráarkerfis"
+msgid "Test of the configuration"
+msgstr "Prófun á stillingum"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Hvar viltu tengja tæki %s?"
+msgid "Installing %s ..."
+msgstr "Set inn %s..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
-"Get ekki aftengt tengipunkt þar sem þessi disksneið inniheldur\n"
-"sýndardisk-skrá.  Fjarlægðu sýndardiskinn fyrst (aftengdu)."
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvar viltu tengja tæki %s?"
+msgid "Choose your filesystem encryption key"
+msgstr "Veldu dulritunarlykil fyrir skráarkerfið"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Hvar viltu tengja sýndardisk-skrá %s?"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Breyti frá ext2 í ext3"
+msgid "Andorra"
+msgstr "Andorra"
 
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which filesystem do you want?"
-msgstr "Hvaða skráarkerfi viltu?"
+msgid "Sierra Leone"
+msgstr "Síera Leóne"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Change partition type"
-msgstr "Breyta tegund sneiðar"
+msgid "Botswana"
+msgstr "Botswana"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Eftir breytingu á sneið %s, hafa öll gögn á þessari disksneið tapast"
+msgid "(default value: %s)"
+msgstr "(sjálfgefið gildi: %s)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove the loopback file?"
-msgstr "Fjarlægja sýndardisk-skrá?"
+msgid "Alternative test page (Letter)"
+msgstr "Önnur prufublaðsíða (Letter)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Preference: "
-msgstr "Valkostur:"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start sector: "
-msgstr "Byrjunar geiri"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create a new partition"
-msgstr "Búa til nýja disksneið"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Use for loopback"
-msgstr "Nota fyrir sýndardisk"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "Breyta RAID"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Remove from LVM"
-msgstr "Taka úr LVM"
+msgid "Choose an X server"
+msgstr "Veldu X miðlara"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "Taka úr RAID"
+msgid "Swap partition size in MB: "
+msgstr "Stærð diskminnis í MB: "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add to LVM"
-msgstr "Bæta við LVM"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add to RAID"
-msgstr "Bæta við RAID"
+msgid "No changes to backup!"
+msgstr ""
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Format"
-msgstr "Forsníða"
+msgid "Formatted\n"
+msgstr "Forsniðinn\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Detailed information"
-msgstr "Ítarlegri upplýsingar"
+msgid "Type of install"
+msgstr "Tegund uppsetningar"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Trying to rescue partition table"
-msgstr "Reyni að endurheimta disksneiðatöfluna"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Prentari á \"%s\" SMB/Windows 95/98/NT \"%s\""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"\n"
+"- Daemon (%s) include:\n"
 msgstr ""
-"Settu diskling í drifið\n"
-"Öll gögn á þessum diskling tapast"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Aðvörun"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Select file"
-msgstr "Veljið skrá"
+msgid "%d comma separated numbers"
+msgstr "%d tölur aðskildar með kommu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
 msgstr ""
-"Disksneiðin sem var tekin sem afrit er ekki af sömu stærð\n"
-"Halda áfram?"
-
-# ## skrytid
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Removable media automounting"
-msgstr "Sjálfvirk tenging aukatækja"
+"rusers leyfir notendum á neti að athuga hverjir hafa stimplað sig\n"
+"inn á viðkomandi vélar."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Reload partition table"
-msgstr "Endurhlaða sneiðatöflunna"
+msgid "Automatic Steps Configuration"
+msgstr "Stillingar sjálfvirkra þrepa"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Rescue partition table"
-msgstr "Bjarga sneiðatöflunni"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore partition table"
-msgstr "Endurheimta sneiðatöflunna"
+msgid "Barbados"
+msgstr "Barbados"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Save partition table"
-msgstr "Vista sneiðatöflu"
+msgid "Please select data to backup..."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
-"Til að fá fleiri disksneiðar, vinsamlega eyddu einni til að búa til "
-"viðbótarsneið"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "Get ekki bætt við disksneiðum"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Allar aðal-skráarsneiðar eru í notkun"
+"Tenging mistókst\n"
+"Athugaðu uppsetninguna í Mandrake stjórnborði."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Hard drive information"
-msgstr "Sýna upplýsingar um harðan disk"
+msgid "received"
+msgstr "móttók"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Auto allocate"
-msgstr "Ráðstafa skjálfkrafa"
+msgid "/File/_New"
+msgstr "/Skrá/_Ný"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Clear all"
-msgstr "Hreinsa allt"
+msgid "The DNS Server IP"
+msgstr "Vistfang DNS þjóns"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Viltu vista /etc/fstab breytingar"
+msgid "IP Range End:"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Hætta án þess að skrifa sneiðatöfluna?"
+msgid "High"
+msgstr "Hátt"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Quit without saving"
-msgstr "Hætta án þess að vista"
+msgid "NoVideo"
+msgstr "NoVideo"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Continue anyway?"
-msgstr "Halda samt áfram?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Þetta svæði lýsir tækinu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Toggle to expert mode"
-msgstr "Færa í snillingsham"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Toggle to normal mode"
-msgstr "Fara í venjulegan ham"
+msgid "Local Printers"
+msgstr "Staðbundnir prentarar"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Undo"
-msgstr "Afturkalla"
+msgid "Installation image directory"
+msgstr "Uppsetningarmappa kjarna"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Exit"
-msgstr "Hætta"
+msgid "NIS Server"
+msgstr "NIS þjónn"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Choose a partition"
-msgstr "Veldu disksneið"
+msgid "Port: %s"
+msgstr "Gátt: %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose another partition"
-msgstr "Veldu aðra disksneið"
+msgid "Spain"
+msgstr "Spánn"
 
-#: ../../diskdrake/removable.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Change type"
-msgstr "Breyta tegund"
+msgid "This user name has already been added"
+msgstr "Þetta notandanafn er nú þegar til"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive.pm:1
 #, c-format
-msgid "Search servers"
-msgstr "Leita að þjónum"
+msgid "Choose a file"
+msgstr "Veldu skrá"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Domain"
-msgstr "Lén"
+msgid "Apply"
+msgstr "Virkja"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Username"
-msgstr "Notandanafn"
+msgid "Auto-detect available ports"
+msgstr "Leita að mögulegum gáttum"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
+msgid "Internet Connection Sharing currently disabled"
 msgstr ""
-"Vinsamlega gefðu upp notandanafn, lykilorð og nafn léns til að fá aðgang að "
-"þessum miðlara"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Domain Authentication Required"
-msgstr "Lénsauðkenningar er þörf"
+msgid "San Marino"
+msgstr "San Marínó"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Another one"
-msgstr "Önnur"
+msgid "Belgium"
+msgstr "Belgía"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which username"
-msgstr "hvaða notandanafn"
+msgid "Kuwait"
+msgstr "Kúvæt"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Get ekki tengst sem notandi %s (vitlaust lykilorð?)"
+msgid "Choose the window manager to run:"
+msgstr "Veldu gluggastjórann sem þú vilt nota:"
 
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Undir-flokkur örgjörva"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "SMBus controllers"
-msgstr "SMBus stýringar"
+msgid "First Time Wizard"
+msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "USB controllers"
-msgstr "USB stýringar"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"Óþekkt villa kom upp sem ekki er hægt að meðhöndla.\n"
+"Haltu áfram á eigin ábyrgð."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "SCSI controllers"
-msgstr "SCSI stýringar"
+msgid "please wait, parsing file: %s"
+msgstr "Augnablik vinn úr skrá: %s"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Firewire controllers"
-msgstr "Firewire stýringar"
+msgid "Taiwan"
+msgstr "Tævan"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA stýringar"
+msgid "Pakistan"
+msgstr "Pakistan"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Joystick"
-msgstr "Gleðigandur"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Scanner"
-msgstr "Myndskanni"
+msgid "Permissions"
+msgstr "Aðgangsheimildir"
 
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Unknown/Others"
-msgstr "Óþekkt/annað"
+msgid "Provider name (ex provider.net)"
+msgstr "Nafn þjónustuaðila (t.d. simnet.is)"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr "Brýr og kerfisstýringar"
+msgid "Version: %s\n"
+msgstr "Útgáfa: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Modem"
-msgstr "Módald"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Ethernetcard"
-msgstr "Netkort"
+msgid "Use the Windows partition for loopback"
+msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Processors"
-msgstr "Örgjörvar"
+msgid "Armenian (typewriter)"
+msgstr "Armenskt (hljóðfræðilegt)"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Webcam"
-msgstr "Vefmyndavél"
+msgid "Connection type: "
+msgstr "Tegund tengingar: "
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Soundcard"
-msgstr "Hljóðkort"
+msgid "Graphical interface"
+msgstr "Grafískt viðmót"
 
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "Other MultiMedia devices"
-msgstr "Önnur margmiðlunartæki"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Tvcard"
-msgstr "Sjónvarpskort"
+msgid "India"
+msgstr "Indland"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Videocard"
-msgstr "Skjákort"
+msgid "Chad"
+msgstr "Chad"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Tape"
-msgstr "Segulband"
+msgid "Slovakia"
+msgstr "Slóvakía"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Singapore"
+msgstr "Singapúr"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD skrifarar"
+msgid "Cambodia"
+msgstr "Kambódía"
 
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Lárétt tíðni skjás: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Disk"
-msgstr "Diskur"
+msgid "Path"
+msgstr "Slóð"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Floppy"
-msgstr "Disklingadrif"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Let me pick any driver"
-msgstr "Lyfðu mér að velja rekil"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Prentari %s\n"
+"Hverju viltu breyta á þessum prentara"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Driver:"
-msgstr "Rekill:"
+msgid "Add host"
+msgstr "Bæta við vél"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
@@ -7713,139 +7932,90 @@ msgstr ""
 "\n"
 "Núverandi rekill fyrir \"%s\" hljóðkortið er \"%s\"."
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Velja einhvern rekil"
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Sound trouble shooting"
-msgstr "Vandamálaleit hljóðkorta"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Villa: rekillinn \"%s\" er ekki á listanum"
+msgid "China (broadcast)"
+msgstr "Kína (loftnet)"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Unkown driver"
-msgstr "Óþekktur rekill"
+msgid "Use quota for backup files."
+msgstr "Nota kvóta fyrir afritaskrár."
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Það er enginn þekktur rekill fyrir hljóðkortið þitt (%s)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Stilla prentara \"%s\"..."
 
-#: ../../harddrake/sound.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "No known driver"
-msgstr "Enginn þekktur rekill"
+msgid "Internet connection"
+msgstr "Internettenging"
 
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
 msgstr ""
-"Það er enginn \"frjáls\" rekill fyrir hljóðkortið þitt (%s) en það er til "
-"rekill framleiðanda á \"%s\"."
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No open source driver"
-msgstr "Enginn \"frjáls hugbúnaðar\" rekill"
-
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Augnablik... Framkvæmi stillingar"
+"Innsetning á einingu %s mistókst.\n"
+"Viltu prófa aftur með ólík viðföng?"
 
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+msgid "Welcome to the Open Source world."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Trouble shooting"
-msgstr "Vandamálaleit"
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnía og Herzegónía"
 
-#: ../../harddrake/sound.pm:1
+#: ../../fsedit.pm:1
 #, c-format
 msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
 msgstr ""
+"Þú þarft raunverulegt skráarkerfi (ext2/ext3, reiserfs, xfs, eða jfs) fyrir "
+"þennan tengipunkt\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Kortið þitt notar rekilinn %s\"%s\" (sjálfgefið fyrir kortið þitt er \"%s\")"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Þú verður að gefa upp vélarnafn eða IP-vistfang.\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Hér getur þú valið annan rekil (annað hvort OSS eða ALSA) fyrir hljóðkortið "
-"þitt (%s)"
+msgid "Netherlands"
+msgstr "Holland"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Sendi skrár..."
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Sound configuration"
-msgstr "Hljóðuppsetning"
+msgid "Internal ISDN card"
+msgstr "Innvært ISDN mótald"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
@@ -7856,1659 +8026,1518 @@ msgstr ""
 "Það er enginn þekktur OSS/ALSA aukarekill fyrir hljóðkortið þitt (%s) sem nú "
 "notar \"%s\""
 
-#: ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "No alternative driver"
-msgstr "Enginn aukarekill"
+msgid "Title"
+msgstr "Titill"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "enable radio support"
-msgstr "virkja útvarps stuðning"
+msgid "Install & convert Fonts"
+msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Radio support:"
-msgstr "Útvarpsstuðningur:"
+msgid "WARNING"
+msgstr "AÐVÖRUN"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "PLL setting:"
-msgstr "PLL stilling:"
+msgid "Installing bootloader"
+msgstr "Setja inn ræsistjórann"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
+msgid "replay"
+msgstr "endurspila"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "detected %s"
+msgstr "skynjuð %s"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Tuner type:"
-msgstr "Útvarpstegund:"
+msgid "Virgin Islands (U.S.)"
+msgstr "Jómfrúreyjar (US)"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Card model:"
-msgstr "Kort tegund:"
+msgid "Bad backup file"
+msgstr "Skemmd afritsskrá"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"GNU/Linux 'bttv' einingin finnur sjálfkrafa uppsetningu á flestum nútíma "
-"sjónvarpskortum.\n"
-"Ef kortið þitt er ekki sett rétt upp þá getur þú stillt móttakarann og "
-"korttegundir hér. Veldu viðföng fyrir kortið þitt ef þess er þörf."
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Óþekkt|almennt"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Óþekkt|CPH06X (bt878) [margir framleiðendur]"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Óþekkt|CPH06X (bt878) [margir framleiðendur]"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Auto-detect"
-msgstr "Finna sjálfkrafa"
+msgid "Pipe into command"
+msgstr "Pípaa inn í skipun"
 
-#: ../../interactive/newt.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do"
-msgstr "Áfram"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
 
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "Þitt val? (sjálfgefið %s) "
+msgid "Detecting devices..."
+msgstr "Leita að tækjum..."
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Bad choice, try again\n"
-msgstr "Rangt val, reyndu aftur\n"
+msgid "Click here to launch the wizard ->"
+msgstr ""
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Re-submit"
-msgstr "Endursenda"
+msgid "Haiti"
+msgstr "Haíti"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"Description of the fields:\n"
+"\n"
 msgstr ""
+"Lýsing á svæðum:\n"
+"\n"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+msgid "the name of the CPU"
+msgstr "nafn örgjörvans"
 
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Það er úr mörgu að velja (%s).\n"
+msgid "Refreshing printer data..."
+msgstr "Endurles prentara upplýsingar..."
 
-#: ../../interactive/stdio.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Þitt val? (sjálfgefið %s'%s) "
+msgid "You must also format %s"
+msgstr "Þú verður einnig að forsníða %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid " enter `void' for void entry"
-msgstr " sláið inn 'void' fyrir autt val"
+msgid "Be careful: this operation is dangerous."
+msgstr "Varaðu þig: þessi aðgerð er hættuleg."
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do you want to click on this button?"
-msgstr "Viltu smella á þennan hnapp?"
+msgid "Insert a floppy containing package selection"
+msgstr "Settu inn diskling sem inniheldur pakkaval"
 
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Button `%s': %s"
-msgstr "Hnappur %s': %s"
+msgid "Server: "
+msgstr "Þjónn: "
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Þitt val? (0/1, sjálfgefið %s') "
+msgid "Security Alerts:"
+msgstr "Öryggisviðvaranir:"
 
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Svæði sem þú verður að fylla:\n"
-"%s"
+msgid "Sweden"
+msgstr "Svíþjóð"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Use Expect for SSH"
 msgstr ""
-"Innsetning á einingu %s mistókst.\n"
-"Viltu prófa aftur með ólík viðföng?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Specify options"
-msgstr "Stilla handvirkt"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Autoprobe"
-msgstr "Stilla sjálfvirkt"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Í sumum tilfellum þarf rekillinn %s auka viðföng svo hann virki rétt,\n"
-" þó hann virki vel í flestum tilfellum án þeirra.  Viltu setja inn auka\n"
-" viðföng eða leyfa reklinum sjálfum að leita að þeim upplýsingum sem\n"
-" hann þarf?  Stundum frystir sjálfvirk stilling vélina en það ætti ekki\n"
-"að skemma neitt."
+msgid "Poland"
+msgstr "Pólland"
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvaða %s rekil viltu prófa?"
+msgid "Importance: %s\n"
+msgstr "Mikilvægi: %s\n"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Module options:"
-msgstr "Stillingar kjarnaeininga:"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Krossaðu hér við ef þú vilt ýta segulbandi út eftir afritun."
 
-# ## skrytid
-#: ../../modules/interactive.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Þú getur núna gefið upp viðföng fyrir eininguna %s.\n"
-"Viðföng eru gefin upp sem ``viðfang=gildi viðfang2=gildi2 ...''.\n"
-"Til dæmis: ``io=0x300 irq=7''"
+msgid "Other ports"
+msgstr "aðrar gáttir"
 
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "number of capture buffers for mmap'ed capture"
 msgstr ""
-"Þú getur núna gefið upp viðföng fyrir eininguna %s.\n"
-"Athugið að vistföng eru gefin upp með formerki 0x eins og '0x123'"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(eining %s)"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Set inn rekil fyrir %s kortið %s"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Skoðaðu vélbúnaðarupplýsingar"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Eru einhver %s tengi í tölvunni?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have another one?"
-msgstr "Er kannski eitt enn í vélinni?"
-
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fann %s %s tengi"
+msgid "SMBus controllers"
+msgstr "SMBus stýringar"
 
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Þú getur stillt öll viðföng einingarinnar hér"
+msgid "Connection timeout (in sec)"
+msgstr "Tenging fellur á tíma eftir (í sek)"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "comma separated strings"
-msgstr "strengir aðskildir með kommu"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
+"Sumir eldri i486DX örgjörvar gátu ekki snúið eðlilega til baka eftir að "
+"\"halt\" skipunin var framkvæmd"
 
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "comma separated numbers"
-msgstr "tölur aðskildar með kommu"
+msgid "Croatian"
+msgstr "Króatískt"
 
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d strengir aðskildir með kommu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Nota núverandi disksneiðar"
 
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "%d comma separated numbers"
-msgstr "%d tölur aðskildar með kommu"
+msgid "Unable to contact mirror %s"
+msgstr "Get ekki tengst spegilvél %s"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "a number"
-msgstr "tala"
+msgid "/Help/_About..."
+msgstr "/Hjálp/_Um..."
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Þú þarft alcatel míkrókóða uppfærslu.\n"
-"sæktu hana á\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"og afritaðu mgmt.o á /usr/share/speedtouch"
+msgid "Remove user directories before restore."
+msgstr "Fjarlægja heimsvæði notanda áður en endurheimt hefst."
 
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
 msgstr ""
-"Algengast er að tengjast við ADSL með pppoe\n"
-"sumir nota pptp (Ísland), nokkrir nota dhcp.\n"
-"Ef þú veist ekki, veldu þá 'nota pptp' (Ísland)"
 
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Tengast Internetinu"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (notar pppoa) usb"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "CUPS prentari samnýtingarstillingar"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "could not find any font in your mounted partitions"
+msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "use dhcp"
-msgstr "nota dhcp"
+msgid "F00f bug"
+msgstr "F00f villa"
 
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "use pptp"
-msgstr "nota pptp"
+msgid "XFree %s"
+msgstr "XFree %s"
 
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "use pppoe"
-msgstr "nota pppoe"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Hvaða dhcp biðlara viltu nota?\n"
+"sjálfgefið er dhcp-biðlari"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Other ports"
-msgstr "aðrar gáttir"
+msgid "Domain Name:"
+msgstr "Nafn léns:"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Everything (no firewall)"
-msgstr "Allt (enginn eldveggur)"
+msgid "On Floppy"
+msgstr "Á diskling"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Ógild gátt gefin: %s.\n"
-"Rétt form er \"gátt/tcp\" eða \"gátt/udp\". \n"
-"þar sem gátt er á bilinu 1 til 65535"
+msgid "Restore"
+msgstr "Endurheimta"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
 msgstr ""
-"Þú getur gefið upp ýmsar gáttir. \n"
-"gild dæmi eru 139/tcp 139/udp.\n"
-"Nánari upplýsingar eru t.d. í /etc/services"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Að hvaða þjónustum viltu leyfa Internetaðgang?"
+msgid "Looking for available packages..."
+msgstr "Leita að fáanlegum pökkum..."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall uppsetning\n"
-"\n"
-"Vertu viss um að hafa sett upp Staðarnet/Internet aðgangur með drakconnect "
-"áður en lengra er haldið."
+msgid "Init Message"
+msgstr "Init skilaboð"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"drakfirewall stillingar\n"
-"\n"
-"Þessi eining stillir prívat eldvegg fyrir þessa Mandrake Linux vél\n"
-"Fyrir öruggan og aflmikinn eldvegg líttu á hina sértæku\n"
-"Mandrake eldveggs útgáfu."
+msgid "Rescue partition table"
+msgstr "Bjarga sneiðatöflunni"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "No network card"
-msgstr "Ekkert netkort fannst"
+msgid "Connection complete."
+msgstr "Tenging uppsett."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "POP and IMAP Server"
-msgstr "POP og IMAP þjónn"
+msgid "Cyprus"
+msgstr "Kýpur"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mail Server"
-msgstr "Póstþjónn"
+msgid "Remove from RAID"
+msgstr "Taka úr RAID"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Domain Name Server"
-msgstr "Nafnaþjónn léns (DNS)"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Web Server"
-msgstr "Vefmiðlari"
+msgid "Configuration Wizards"
+msgstr "Stilli-álfar"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zerocont vélarheiti má ekki innihalda ."
+msgid "ISDN connection"
+msgstr "ISDN tenging"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Host name"
-msgstr "Heiti vélar"
+msgid "primary"
+msgstr "aðal"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf Heiti vélar"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " á SMB/Windows miðlara \"%s\", sameign \"%s\""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
 "\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
 "\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
 "\n"
-"Gefðu upp Zeroconf heiti vélar án punkts ef þú vilt ekki\n"
-"nota sjálfgefið nafn vélar."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Stilli nettengingar"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
 
-#: ../../network/ethernet.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Veldu hvaða netkort þú notar til að tengjast Internetinu."
+msgid "Skip"
+msgstr "Sleppa"
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose the network interface"
-msgstr "Veldu netkort"
+msgid "Niue"
+msgstr "Niue"
 
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
 msgstr ""
-"Ekkert netkort hefur fundist á tölvunni þinni, Ég get ekki\n"
-"sett upp þessa tengingu."
+"Virkjar eða aftengir öll nettengi skilgreind til að ræsast\n"
+"þegar kerfi er ræst."
 
-#: ../../network/ethernet.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
 msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
 msgstr ""
-"Hvaða dhcp biðlara viltu nota?\n"
-"sjálfgefið er dhcp-biðlari"
+"Tíðni örgjörva í MHz (Megarið sem er fyrsta nálgun á fjölda aðgerða sem "
+"örgjörvinn getur framkvæmt á sekúndu)"
 
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ekkert ISDN-PCI kort fannst. Vinsamlega veldu eitt á næsta skjá."
+msgid "important"
+msgstr "áríðandi"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+msgid "Total Progress"
 msgstr ""
-"Ég hef fundið ISDN PCI kort, en ég veit ekki hvaða tegund. Vinsamlega veldu "
-"tegund á næsta skjá."
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Hvert af eftirfarandi er þitt ISDN kort?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN uppsetning"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Hætta við"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "Áfram"
-
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
 "\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
 "\n"
-"Ef þú ert með ISA kort þá ættu gildin á næsta skjá að vera rétt.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
 "\n"
-"Ef þú hefur PCMCIA kort, þá þarft þú að vita \"irq\" og \"io\" kortsins.\n"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Ég veit ekki"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "What kind of card do you have?"
-msgstr "Hvernig kort ertu með?"
+msgid "Users"
+msgstr "Notendur"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Fann \"%s\" kort vilu nota það ?"
+msgid "Aruba"
+msgstr "Aruba"
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Hvaða samskiptareglu viltu nota?"
+msgid "Preparing bootloader..."
+msgstr "Set upp ræsistjórann..."
 
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Samskiptaregla til tengingar við umheiminn"
+msgid "Gateway (e.g. %s)"
+msgstr "Gátt (þ.e. %s)"
 
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr "Samskiptaregla til tengingar við umheiminn"
+msgid "The passwords do not match"
+msgstr "Mismunandi lykilorð"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "European protocol"
-msgstr "Evrópskan samskiptastaðal"
+msgid "Examples for correct IPs:\n"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Evrópskan samskiptastaðal (EDSSI)"
+msgid "Frequency (MHz)"
+msgstr "Tíðni (Mhz)"
 
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 msgstr ""
-"Veldu þjónustuaðila.\n"
-"Ef hann er ekki á lista, veldu 'Ekki á lista'"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "External ISDN modem"
-msgstr "Útvært ISDN mótald"
+msgid "the number of the processor"
+msgstr "númer örgjörvans"
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Internal ISDN card"
-msgstr "Innvært ISDN mótald"
+msgid "Hardware clock set to GMT"
+msgstr "Tölvuklukkan stillt á GMT"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Hvaða gerðar er ISDN tengingin þín?"
+msgid "Give a file name"
+msgstr "Gefðu upp skráarnafn"
 
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Network Configuration Wizard"
-msgstr "Netstillinga álfur"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Veldu hvaða tengi er prentarinn er tengdur við"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Eldri stillingar (isdn4net)"
+msgid "Change Cd-Rom"
+msgstr "Breyta geisladrifi"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nýrri stillingar (isdn-light)"
+msgid "Paraguay"
+msgstr "Paragvæ"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr ""
-"Hvaða ISDN uppsetningu viltu nota?\n"
-"\n"
-"* Eldri uppsetningin notarisdn4net. þar eru öflug tæki\n"
-"og tól en erfitt að setja upp, og ekki staðlað.\n"
-"\n"
-"* Nýja uppsetningin er einfaldari að setja upp, meira\n"
-"stöðluð, en færri tæki og tól.\n"
-"\n"
-"Við mælum með nýju uppsetningunni.\n"
 
-#: ../../network/modem.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Do nothing"
-msgstr "Gera ekkert"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Það er enginn þekktur rekill fyrir hljóðkortið þitt (%s)"
 
-#: ../../network/modem.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Install rpm"
-msgstr "Setja inn rpm"
+msgid "force"
+msgstr "Þvinga"
 
-#: ../../network/modem.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
+msgid "Exit"
+msgstr "Hætta"
 
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Title"
-msgstr "Titill"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
-"Mótaldið þitt er ekki stutt af kerfinu.\n"
-"Líttu á http://www.linmodems.org"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Vara nafnamiðlari (ekki krafist)"
+msgid "Estonian"
+msgstr "Eistlenskt"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "First DNS Server (optional)"
-msgstr "Aðal nafnamiðlari (ekki krafist)"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache er vefmiðlari, sem veitir aðgang að HTML skjölum og CGI."
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Domain name"
-msgstr "Nafn léns"
+msgid "Add/Del Clients"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Choose the network interface"
+msgstr "Veldu netkort"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Script-based"
-msgstr "Með skriftu"
+msgid "Unknown Model"
+msgstr "Óþekkt tegund"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Terminal-based"
-msgstr "Með skjáhermi"
+msgid "CD/DVD burners"
+msgstr "CD/DVD skrifarar"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Sjálfgefin disksneið ræst\n"
+"    (fyrir MS-DOS ræsingu, ekki fyrir LILO)\n"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Notendanafn"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Veldu aðgerð"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Phone number"
-msgstr "Símanúmer"
+msgid "Firewalling configuration detected!"
+msgstr "Fann eldveggsuppsetningu!"
 
 #: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Connection name"
 msgstr "Nafn tengingar"
 
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "Innhringistillingar"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Hvaða raðtengi er mótaldið tengt við"
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Netstillingar"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
 msgstr ""
+"x hnit textaglugga\n"
+"í fjölda stafa"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Eftir að þessu er lokið mælum við með að þú  endurræsir X umhverfið til að "
-"koma í veg fyrir nafna-tengd vandamál."
+msgid "Updating package selection"
+msgstr "Uppfæri val á pökkum"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Til hamingju, staðarnets og Internets uppsetningu er lokið.\n"
-"Uppsetnigin verður nú gerð virk.\n"
-"\n"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Hvar viltu tengja sýndardisk-skrá %s?"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
 msgstr ""
-"Vandamál kom upp við enduræsingu nets: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Það þarf að endurræsa netið, viltu endurræsa það núna?"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Netstillingar"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Viltu ræsa nettengingarnar þegar kerfi ræsir?"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Internet connection"
-msgstr "Internettenging"
+msgid "the number of buttons the mouse has"
+msgstr "fjöldi hnappa sem músin hefur"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
 msgstr ""
-"Þú hefur skilgreint nokkrar leiðir til að tengjast Internetinu.\n"
-"Veldi þá sem þú vilt nota.\n"
-"\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Veldu tenginguna sem þú vilt stilla"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ethernet card(s) detected"
-msgstr "netkort fundin"
-
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "LAN connection"
-msgstr "Staðarnetstenging"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "Breiðbandstenging skynjuð"
+msgid "Replay"
+msgstr "Spila aftur"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cable connection"
-msgstr "Breiðbandstenging"
+msgid "Backup other files"
+msgstr "Afrita aðrar skrár"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "detected"
-msgstr "skynjuð"
+msgid "No floppy drive available"
+msgstr "Ekkert disklingadrif aðgengilegt"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "ADSL connection"
-msgstr "ADSL tenging"
+msgid "Backup files are corrupted"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "detected %s"
-msgstr "skynjuð %s"
+msgid "TV norm:"
+msgstr "Sjónvarpsstaðall:"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "ISDN connection"
-msgstr "ISDN tenging"
+msgid "Cpuid family"
+msgstr "Fjölskylduauðkenni örgjörva"
 
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem tenging"
+msgid "32 MB"
+msgstr "32 MB"
 
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "detected on port %s"
-msgstr "fundin á tengi %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litháenískt AZERTY (nýtt)"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Normal modem connection"
-msgstr "Venjuleg mótaldstenging"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "já þýðir að fleytitöluörgjörvinn hefur tengt sig sérstöku ígripi"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Detecting devices..."
-msgstr "Leita að tækjum..."
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Þú hefur valið að nota RAID hugbúnað til að stjórna rótarsneið (/).\\ Enginn "
+"ræsistjóri ræður við þetta án sérstakrar /boot sneiðar.\n"
+"Vinsamlega passaðu uppá að bæta við sneið fyrir /boot"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Expert Mode"
-msgstr "F. sérfræðinga"
+msgid "Previous"
+msgstr "Fyrra"
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use auto detection"
-msgstr "Finna sjálfvirkt"
+msgid "Other OS (MacOS...)"
+msgstr "Öðru stýrikerfi (MacOS...)"
 
-#: ../../network/netconnect.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Choose the profile to configure"
-msgstr "Veldu snið til að stilla"
+msgid "To activate the mouse,"
+msgstr "Til að virkja músina,"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
+msgid "Bringing up the network"
+msgstr "Keyri upp netið"
 
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
+msgid "Screenshots will be available after install in %s"
+msgstr "Skjámyndir verða tiltækar eftir uppsetningu í %s"
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
 "\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
 "\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"We are now going to configure the %s connection.\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
 "\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
 "\n"
-"Press OK to continue."
-msgstr ""
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
 "\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
 "\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
 "\n"
-"Við ætlum nú að fara að stilla tenginguna %s.\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
 "\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
 "\n"
-"Ýttu á 'Í lagi' til að halda áfram."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Við ætlum nú að fara að stilla tenginguna %s."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internet tenging og stilling"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Stilla nettengingu"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Disconnect"
-msgstr "Aftengja"
+msgid "Tanzania"
+msgstr "Tansanía"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Connect"
-msgstr "Tengjast"
+msgid "Computing FAT filesystem bounds"
+msgstr "Reikna takmarkanir FAT skráarkerfis"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
-"You can reconfigure your connection."
+"Backup Sources: \n"
 msgstr ""
-"\n"
-"Þú getur endurstillt tenginguna þína."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Þú getur tengst Internetinu eða endurstillt tenginguna þína."
+msgid "Content of the file"
+msgstr "Innihald skrár"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Þú ert ekki tengdur Internetinu."
+msgid "Authentication LDAP"
+msgstr "Auðkenning LDAP"
 
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Þú getur aftengst eða endurstillt tenginguna þína."
+msgid "Let me pick any driver"
+msgstr "Lyfðu mér að velja rekil"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Þú ert tengdur Internetinu."
+msgid "Profile "
+msgstr "Snið "
 
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Slóð ætti að byrja á 'ftp' eða 'http'"
+msgid "transmitted"
+msgstr "sendi"
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "Sel ætti að vera http://..."
+msgid "Palestine"
+msgstr "Palestína"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "FTP proxy"
-msgstr "FTP Sel:"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "HTTP proxy"
-msgstr "HTTP sel:"
+msgid "%d comma separated strings"
+msgstr "%d strengir aðskildir með kommu"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Proxies configuration"
-msgstr "Seluppsetning"
+msgid "Here is the full list of keyboards available"
+msgstr "Hér er listi af mögulegum lyklaborðsuppsetningum"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Vistfang Gáttar á að vera á sniðinu 1.2.3.4"
+msgid "Theme name"
+msgstr "Þema nafn"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Vistfang DNS-þjóns á að vera á sniðinu 1.2.3.4"
+msgid "/_Help"
+msgstr "/_Hjálp"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gateway device"
-msgstr "Gátt (tækið)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Hér getur þú valið hvort myndskanni tengur þessarri vél eigi að vera "
+"aðgengilegur frá öðrum vélum, og þá hvaða vélum."
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gátt (þ.e. %s)"
+msgid "the width of the progress bar"
+msgstr "breidd framvindusúlu"
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "DNS server"
-msgstr "Nafnamiðlari"
+msgid "Cook Islands"
+msgstr "Cook eyjar"
 
-#: ../../network/network.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Sláðu inn heiti vélarinnar.  Vélarheitið þarf að vera fullt \n"
-"heiti, t.d. odinn.grimsey.is  Þú mátt líka slá inn IP \n"
-"vistfang gáttarinnar ef þú veist hvað það vistfang er.\n"
-"Gáttin gefur þér aðgang út úr staðarnetinu (t.d. á Internetið)."
+msgid "Formatting partition %s"
+msgstr "Forsníð disksneið %s"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "Hostname required"
+msgstr "Þörf er á vélarheiti"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Unselect fonts installed"
 msgstr ""
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP vistfang á að vera á sniðinu 1.2.3.4"
+msgid "Cancel"
+msgstr "Hætta við"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Start at boot"
-msgstr "Ræsa við kerfisræsingu"
+msgid "Searching for configured scanners ..."
+msgstr "Leita að uppsettum myndskönnum..."
 
-#: ../../network/network.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Skilgreina nafn vélar frá DHCP vistfangi"
+msgid "Wheel"
+msgstr "Hjól"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Netstillingar"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Videocard"
+msgstr "Skjákort"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "\tBackups use tar and bzip2\n"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "DHCP host name"
-msgstr "DHCP vélarheiti:"
+msgid "Remove Selected"
+msgstr "Fjarlægja valið"
 
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Netmask"
-msgstr "Netsía"
+msgid "/Autodetect _modems"
+msgstr "/Finna _motöld sjálfkrafa"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP address"
-msgstr "IP vistfang:"
+msgid "Remove printer"
+msgstr "Fjarlægja prentara"
 
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"AÐVÖRUN\n"
+"\n"
+"DrakX þarf núna að endurgera Windows sneiðina. Athugið:\n"
+"Þetta getur haft alvarlegar afleiðingar í för með sér.\n"
+"Ef þú ert ekki búin(n) að því, þá ættir þú fyrst að\n"
+"keyra scandisk (og jafnvel líka defrag) á þessa sneið og\n"
+"taka síðan afrit af gögnunum þínum.\n"
+"Sláðu á 'Í lagi' til að halda áfram."
 
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Automatic IP"
-msgstr "Sjálfvirkt IP"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Að hvaða þjónustum viltu leyfa Internetaðgang?"
 
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid " (driver %s)"
-msgstr " (rekill: %s)"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Velkomin að póstuppsetningarforritnu.\n"
+"\n"
+"Hér getur þú stillt viðvörunarkerfi.\n"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Configuring network device %s"
-msgstr "Stilli nettæki %s"
+msgid "Other"
+msgstr "Annað"
 
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Sláðu inn IP uppsetningu þessarar vélar. Hver færsla\n"
-"á að vera IP tala rituð með punkt á milli.\n"
-"(dæmi 1.2.3.4)"
+msgid "Default"
+msgstr "Sjálfgefið"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
+msgid "Button 2 Emulation"
+msgstr "Tveggja hnappa hermir"
 
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "type1inst building"
 msgstr ""
 
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Fann eldveggsuppsetningu!"
+msgid "Abiword"
+msgstr "Abiword"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Account Password"
-msgstr "Netþjónustu-lykilorð"
+msgid "choose image file"
+msgstr "Veldu myndskrá"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Netþjónustu-notandanafn"
+msgid "X server"
+msgstr "X miðlari"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Tenging fellur á tíma eftir (í sek)"
+msgid "Domain Admin User Name"
+msgstr "Notandanafn kerfisstjóra léns"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Connection speed"
-msgstr "Tengihraði"
+msgid "There was an error while scanning for TV channels"
+msgstr "Það kom upp villa við leit að sjónvarpsrásum"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Dialing mode"
-msgstr "Hringihamur"
+msgid "US keyboard (international)"
+msgstr "Bandarískt (alþjóðlegt)"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Choose your country"
-msgstr "Veldu þér land"
+msgid "Not installed"
+msgstr "Ekki settur inn"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Nafnamiðlari 2 (ekki krafist)"
+msgid "LAN connection"
+msgstr "Staðarnetstenging"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Nafnamiðlari 1 (ekki krafist)"
+msgid "/File/-"
+msgstr "/Skrá/-"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Provider phone number"
-msgstr "Símanúmer netþjónustu"
+msgid "Italian"
+msgstr "Ítalskt"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nafn þjónustuaðila (t.d. simnet.is)"
+msgid "Basic"
+msgstr "Einfalt"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Your personal phone number"
-msgstr "Þitt símanúmer"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Card IO_1"
-msgstr "Kort IO_1"
+msgid "Honduras"
+msgstr "Hondúras"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Card IO_0"
-msgstr "Kort IO_0"
+msgid "pdq"
+msgstr ""
 
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Card IO"
 msgstr "Kort IO"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Card mem (DMA)"
-msgstr "Kortminni (DMA)"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Card IRQ"
-msgstr "Kort IRQ"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Please fill or check the field below"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
 msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "Tengi-stillingar"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Þú getur einnig valið hvor myndskannar á fjarlægum vélum ættu að vera "
+"aðgengilegir frá þessari vél."
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "\t-Network by FTP.\n"
 msgstr ""
-"Kerfið virðist ekki vera tengt við Internetið.\n"
-"reyndu að endurstilla tenginguna."
 
-#: ../../network/tools.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Af öryggisástæðum verður aftengt núna."
+msgid "Russian (Yawerty)"
+msgstr "Rússneskt (Yawerty)"
 
-#: ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Kerfið er nú tengt Internetinu"
+msgid "You must enter a device or file name!"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Testing your connection..."
-msgstr "Prófa tenginguna þína..."
+msgid "/_Quit"
+msgstr "/_Hætta"
 
-#: ../../network/tools.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Viltu reyna að tengjast Internetinu núna?"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Þú þarft alcatel míkrókóða uppfærslu.\n"
+"sæktu hana á\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"og afritaðu mgmt.o á /usr/share/speedtouch"
 
-#: ../../network/tools.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Internet configuration"
-msgstr "Internet stillingar"
+msgid "Graphics memory: %s kB\n"
+msgstr "Skjákortsminni: %s kB\n"
 
-#: ../../partition_table/raw.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
 msgstr ""
-"Eitthvað slæmt er að gerast á disknum þínum.\n"
-"Féll á prófi þar sem athugað var samræmi á \n"
-"gögnum á disknum\n"
-"Það þýðir að allt sem þú skrifar á diskinn endar á\n"
-"óvissum stað 'einhverstaðar' sem ruglar málin en meir!"
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid " (Default)"
-msgstr " (Sjálfgefið)"
+msgid "access to compilation tools"
+msgstr "aðgengi að þróunartólum"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Á CUPS þjóni \"%s\""
+msgid "Please select data to restore..."
+msgstr ""
 
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Remote Printers"
-msgstr "Fjartengdir prentarar"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
 
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Standard test page"
+msgstr "Stöðluð prufusíða"
 
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "(on this machine)"
-msgstr "(á þessarri vél)"
+msgid "Create"
+msgstr "Búa til"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "(on %s)"
-msgstr "(á %s)"
+msgid "What"
+msgstr "Hvað"
 
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "There was an error ordering packages:"
+msgstr "Það kom upp villa við að raða pökkum:"
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Bulgarian (BDS)"
+msgstr "Búlgarskt (BDS)"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Disable Server"
+msgstr "Aftengja þjón"
 
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Filesystem encryption key"
+msgstr "Dulritunarlykill skráakerfis"
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Gujarati"
+msgstr "Gujarati"
 
-#: ../../printer/data.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Save theme"
+msgstr "Vista þema"
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Unknown Model"
-msgstr "Óþekkt tegund"
+msgid "group"
+msgstr "hópur"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unknown model"
-msgstr "Óþekkt tegund"
+msgid "Brazil"
+msgstr "Brasilía"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Gátt %s)"
+msgid "Auto Install"
+msgstr "Sjáfvirk innsetning"
 
-#: ../../printer/main.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Host %s"
-msgstr "Vél %s"
+msgid "Network Configuration Wizard"
+msgstr "Netstillinga álfur"
 
-#: ../../printer/main.pm:1
+# ## skrytid
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Network %s"
-msgstr "Net %s"
+msgid "Removable media automounting"
+msgstr "Sjálfvirk tenging aukatækja"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Interface \"%s\""
-msgstr "Tengi \"%s\""
+msgid "Printing"
+msgstr "Prentun"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Local network(s)"
-msgstr "Staðbundið(n) net"
+msgid "Unkown driver"
+msgstr "Óþekktur rekill"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
-msgstr "Hrár prentari (enginn rekill)"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", using command %s"
-msgstr " nota skipun %s"
+msgid "Create a new partition"
+msgstr "Búa til nýja disksneið"
 
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " á Novell miðlara \"%s\", prentari \"%s\""
+msgid "Driver:"
+msgstr "Rekill:"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " á SMB/Windows miðlara \"%s\", sameign \"%s\""
+msgid "unknown"
+msgstr "óþekkt"
 
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP vél \"%s\", gátt %s"
+msgid "Use fdisk"
+msgstr "Nota fdisk"
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " á LPD þjóni \"%s\", prentari \"%s\""
+msgid "MOVE YOUR WHEEL!"
+msgstr "Hreyfðu hjólið!"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ", printing to %s"
-msgstr ", prenta á %s"
+msgid "sent: "
+msgstr "sendi: "
 
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ", multi-function device"
-msgstr ""
+msgid "Automatic IP"
+msgstr "Sjálfvirkt IP"
 
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ", multi-function device on HP JetDirect"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ", multi-function device on USB"
-msgstr ""
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
 
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ""
+msgid "Configuration of a remote printer"
+msgstr "Stilla fjartengdan prentara"
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ", USB printer"
-msgstr ", USB prentari"
+msgid "Moldova"
+msgstr "Moldóvía"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB prentari \\#%s"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Krossaðu hér við ef þú vilt eyða öllum gögnum á bandi fyir afritun."
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid " on parallel port \\#%s"
-msgstr " á raðtengi - port \\#%s"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Local Printers"
-msgstr "Staðbundnir prentarar"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Slóð ætti að byrja á 'ftp' eða 'http'"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Pipe job into a command"
-msgstr "Senda prentverk á skipun"
+msgid "Add a new rule at the end"
+msgstr "Bæta við reglu aftast"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Enter a printer device URI"
-msgstr "Gefðu upp slóð að prentara (URI)"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
 
-#: ../../printer/main.pm:1
+# ## skrytid
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Printer on NetWare server"
-msgstr "Prentari á NetWare miðlara"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Þú getur núna gefið upp viðföng fyrir eininguna %s.\n"
+"Viðföng eru gefin upp sem ``viðfang=gildi viðfang2=gildi2 ...''.\n"
+"Til dæmis: ``io=0x300 irq=7''"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Prentari á SMB/Windows 95/98/NT miðlara"
+msgid "Quit without writing the partition table?"
+msgstr "Hætta án þess að skrifa sneiðatöfluna?"
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Net prentari (TCP/Sökkull)"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Printer on remote lpd server"
-msgstr "Prentari fjartengdur á lpd þjóni"
+msgid "Installing packages..."
+msgstr "Set inn pakka..."
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Prentari fjartengdur á CUPS þjóni"
+msgid "Dutch"
+msgstr "Hollenskt"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Remote printer"
-msgstr "Fjartengdur prentari"
+msgid "The following packages need to be installed:\n"
+msgstr "Eftirfarandi pakka þarf að setja inn:\n"
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Local printer"
-msgstr "Staðbundinn prentari"
+msgid "Angola"
+msgstr "Angóla"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Configuring applications..."
-msgstr "Set upp forrit..."
+msgid "service setting"
+msgstr "Þjónustustillingar"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Custom"
+msgstr "Sérsniðið"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Fjarlægi prentara \"%s\"..."
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Vitlu í alvöru fjarlægja prentarann \"%s\"?"
+msgid "Read-only"
+msgstr "Ritvarið"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remove printer"
-msgstr "Fjarlægja prentara"
+msgid "Latvia"
+msgstr "Lettland"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Learn how to use this printer"
-msgstr "Læra hvernig á að nota þennann prentara"
+msgid "No known driver"
+msgstr "Enginn þekktur rekill"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Print test pages"
-msgstr "Prenta út prufublaðsíðu(r)"
+msgid "1 MB"
+msgstr "1 MB"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
 #, c-format
 msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
+"Ekkert hljóðkort hefur fundist á tölvunni þinni. Vinssamlega athugaðu hvort "
+"hljóðkort sem stutt er af Linux sé rétt sett upp. \n"
+"\n"
+"Þú getur leitað í vélbúnaðargagnagrunni á:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Configure Local Area Network..."
+msgstr "Stilla staðarnetstengingu..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Launch the sound system on your machine"
+msgstr "Ræsa hljóðkerfi fyrir vélina þína"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Preparing printer database..."
+msgstr "Undirbý prentara-gagnagrunn..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Information"
+msgstr "Upplýsingar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "No network card"
+msgstr "Ekkert netkort fannst"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Which filesystem do you want?"
+msgstr "Hvaða skráarkerfi viltu?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
+msgid "3 buttons"
+msgstr "3 hnappar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Default printer"
-msgstr "Sjálfgefinn prentari"
+msgid "Detailed information"
+msgstr "Ítarlegri upplýsingar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set this printer as the default"
-msgstr "Setja þennan prentara sjálfgefinn"
+msgid "Malta"
+msgstr "Malta"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "Stillingar á prentara"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
+msgid "This floppy is not FAT formatted"
+msgstr "Þessi disklingur er ekki FAT forsniðinn"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
+msgid "Configuring network"
+msgstr "Stilli nettengingar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Fjarlægi gamlan prentara \"%s\"..."
+msgid "Graphic Card"
+msgstr "Skjákort"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Printer name, description, location"
-msgstr "Prentaranafn, lýsing, staðsetning"
+msgid "Resizing Windows partition"
+msgstr "Breyta stærð Windows skráarkerfis"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Printer connection type"
-msgstr "Tegund prenttengingar"
+msgid "Provider dns 1 (optional)"
+msgstr "Nafnamiðlari 1 (ekki krafist)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Raw printer"
-msgstr "Hrár prentari"
+msgid "Cameroon"
+msgstr "Kamerún"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do it!"
-msgstr "Áfram!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -9517,414 +9546,344 @@ msgstr "Áfram!"
 msgid "Close"
 msgstr "Loka"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
-"Prentari %s\n"
-"Hverju viltu breyta á þessum prentara"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Breyta prentarastillingum"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add a new printer"
-msgstr "Bæta við prentara"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Normal Mode"
-msgstr "Venjulegur hamur"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Change the printing system"
-msgstr "Breyta prentkerfinu"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS uppsetning"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
+msgid "Calendar"
+msgstr "Dagatal"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Display all available remote CUPS printers"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
 msgstr ""
+"Til þess að nota fjartengda lpd prentröð þarftu að gefa\n"
+"upp vélarheiti prentþjónsins og prentröðina á þeim sem\n"
+"þú vilt senda prentverkin í."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printing system: "
-msgstr "Prentkerfi:"
+msgid "Iceland"
+msgstr "Ísland"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Checking installed software..."
-msgstr "Athuga uppsettann hugbúnað..."
+msgid "consolehelper missing"
+msgstr "consolehelper vantar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Installing Foomatic..."
-msgstr "Set inn Foomatic..."
+msgid "stopped"
+msgstr "stöðvað"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Gat ekki stillt prentara \"%s\"!"
+msgid "Whether the FPU has an irq vector"
+msgstr "Hvort fleytitölu-örgjörvinn hefur sérstakt ígrip"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Stilla prentara \"%s\"..."
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Reading printer data..."
-msgstr "Les prentara-upplýsingar..."
+msgid "Expand Tree"
+msgstr "Opna tré"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvaða prentkerfi (biðraðastjóra) viltu nota?"
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Select Printer Spooler"
-msgstr "Veldu biðraðastjóra"
+msgid "Expert Mode"
+msgstr "F. sérfræðinga"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Setting Default Printer..."
-msgstr "Set sjálfgefinn prentara..."
+msgid "Printer options"
+msgstr "Stillingar á prentara"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Installing %s ..."
-msgstr "Set inn %s..."
+msgid "Local Network adress"
+msgstr "Staðbundið IP-vistfang"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Removing %s ..."
-msgstr "Fjarlægi %s..."
+msgid "Backup your System files. (/etc directory)"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
 "\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
 "\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
 msgstr ""
+"Þú hefur nú möguleika á að sækja uppfærða pakka.  Þessir pakkar\n"
+"hafa verið uppfærðir eftir að dreifingin ver send úr húsi.  Þeir kunna\n"
+"að innihalda villuleiðréttingar eða öryggisuppfærslur.\n"
+"\n"
+"Til að sækja þessa pakka þá verður þú að vera tengdur Internetinu.\n"
+"\n"
+"Viltu sækja uppfærslurnar?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Ræsa prentkerfi við kerfisræsingu"
+msgid "Samba Server"
+msgstr "Samba Miðlari"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
+"Enable/Disable IP spoofing protection."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "Taugaveiklað"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "Hátt"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Endurræsi prentkerfi..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Stilla fjartengdan prentara"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
+msgid "Australian Optus cable TV"
+msgstr "Ástralska Optus kapal TV"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
 msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr ""
+"  <Tab>/<Alt-Tab> milli hluta   |   <Bilslá> velur   |   <F12> næsti skjár "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Configure the network now"
-msgstr "Stilla nettengingu núna"
+msgid "Subnet:"
+msgstr "Staðarnet:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Go on without configuring the network"
-msgstr "Halda áfram án þess að stilla nettengingu"
+msgid "Zimbabwe"
+msgstr "Simbave"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
+msgid "Please enter the host name or IP."
+msgstr "Sláðu inn nafn vélar eða IP."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Network functionality not configured"
-msgstr "Netmöguleikar ekki skilreindir"
+msgid "When"
+msgstr "Hvenær"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Starting network..."
-msgstr "Ræsi net..."
+msgid "Second DNS Server (optional)"
+msgstr "Vara nafnamiðlari (ekki krafist)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Refreshing printer data..."
-msgstr "Endurles prentara upplýsingar..."
+msgid "Finland"
+msgstr "Finnland"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Transfer printer configuration"
-msgstr "Flytja prentarastillingar"
+msgid "Color depth: %s\n"
+msgstr "Litadýpt: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Transferring %s..."
-msgstr "Flyt %s..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Þú getur ekki afvalið þennan pakka, það verður að uppfæra hann"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "New printer name"
-msgstr "Nýtt prentaranafn"
+msgid "Loading from floppy"
+msgstr "Hleð inn frá diskling"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Transfer"
-msgstr "Flutningur"
+msgid "Slovenia"
+msgstr "Slóvenía"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
 msgstr ""
+"Sláðu inn notanda\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Ekki flytja prentara"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
+msgid "ProgressBar color selection"
+msgstr "Litaval framvindusúlu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
 msgstr ""
+"Hérna eru núverandi stillingar á ræsivalmynd .\n"
+"Þú getur bætt við fleirum eða breytt þessum."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
+msgid "Radio support:"
+msgstr "Útvarpsstuðningur:"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+msgid "Installing SANE packages..."
+msgstr "Set inn SANE pakka..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+msgid "boot disk creation"
+msgstr "búa til ræsidisk"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printing test page(s)..."
-msgstr "Prenta út prufublaðsíðu(r)..."
+msgid "LDAP"
+msgstr "LDAP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Print option list"
-msgstr "Valkostir á prentara"
+msgid "SILO"
+msgstr "SILO"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Prenta á prentara \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Keyri upp netið"
+msgid "Change type"
+msgstr "Breyta tegund"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Prenta/skanna á \"%s\""
+msgid "SILO Installation"
+msgstr "SILO uppsetning"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Prenta/skanna/Mynd á \"%s\""
+msgid "Use CD/DVDROM to backup"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
 "\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
 msgstr ""
+"Til hamingju! Innsetningu er lokið.\n"
+"Taktu disklinginn eða geisladiskinn úr drifinu og sláðu á ENTER.\n"
+"\n"
+"\n"
+"viðbætur og/eða lagfæringar á göllum sem gætu verið til\n"
+"staðar í þessari útgáfu af Mandrake Linux má finna á \n"
+"\n"
+"\n"
+"%s \n"
+"\n"
+"Frekari upplýsingar um hvernig á að stilla vélina eftir innsetninguna er að\n"
+"finna í viðeigandi kafla í Official Mandrake Linux User's Guide bókinni."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
+msgid "paranoid"
+msgstr "Taugaveiklað"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Send mail report after each backup to:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -9935,726 +9894,592 @@ msgid ""
 "because the file to print is provided by the application.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Resolution"
+msgstr "Upplausn"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
 msgstr ""
+"Til þess að geta prentað á SMB prentara þarftu að gefa\n"
+"upp SMB vélarheiti þjónsins (sem er ekki endilega það\n"
+"sama og TCP/IP vélarheitið en oftast) og jafnvel IP vistfang prentþjónsins\n"
+"ásamt samnýtingarheiti prentarans, notandaheiti, lykilorði og\n"
+"vinnuhópsupplýsingum fyrir prentarann."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+" Accept/Refuse icmp echo."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
+msgid "reconfigure"
+msgstr "endurstilla"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
+msgid "Xinetd Service"
+msgstr "Xinetd Þjónusta"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Did it work properly?"
-msgstr ""
+msgid "access to network tools"
+msgstr "aðgengi að nettólum"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do not print any test page"
-msgstr "Prenta ekki út prufublaðsíðu(r)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Myndprófunarsíðu(r)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Önnur prufublaðsíða (A4)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Önnur prufublaðsíða (Letter)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Standard test page"
-msgstr "Stöðluð prufusíða"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print"
-msgstr "Prenta"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "No test pages"
-msgstr "Engar prufusíður"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+msgid "Here is a list of all auto-detected printers. "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Test pages"
-msgstr "Prufusíður"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Viltu setja þennan prentara (\"%s\")\n"
-"sem sjálfgefinn prentara?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s out of range!"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valkostur %s verður að vera tala!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valkostur %s verður að vera heiltala!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer default settings"
-msgstr "Sjálfgefin stilling prentara"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Printer default settings\n"
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
 "\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"Restore Selected\n"
+"Files"
 msgstr ""
+"Endurheimta valdar\n"
+"Skrár"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark bleksprautu stillingar"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "Please fill or check the field below"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter stillingar"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Viltu vista /etc/fstab breytingar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+msgid "Boot Protocol"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which printer model do you have?"
-msgstr "Hvaða prentarategund ertu með?"
+msgid "LVM-disks %s\n"
+msgstr "LVM-diskar %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printer model selection"
-msgstr "Veldu prentarategund"
+msgid "The package %s is needed. Install it?"
+msgstr "Pakka %s er þörf, setja hann inn?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Reading printer database..."
-msgstr "Les prentara-gagnagrunn..."
+msgid "On boot"
+msgstr "Við ræsingu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Select model manually"
-msgstr "Velja tegund handvirkt"
+msgid "Bus identification"
+msgstr "Brautar auðkenning"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "The model is correct"
-msgstr "Tegundin er rétt"
+msgid "Please make a backup of your data first"
+msgstr "Vinsamlega taktu fyrst afrit af öllum gögnum"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "Vatican"
+msgstr "Vatikanið"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Your printer model"
-msgstr "Þín tegund prentara"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Þú hefur meir en einn harðan disk. Hvar viltu setja upp Linux?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Preparing printer database..."
-msgstr "Undirbý prentara-gagnagrunn..."
+msgid "Boot ISO"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Location"
-msgstr "Staðsetning"
+msgid "Eritrea"
+msgstr "Erítrea"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Description"
-msgstr "Lýsing"
+msgid "Remove List"
+msgstr "Fjarlægja lista"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid "Name of printer"
-msgstr "Nafn prentara"
+msgid "A customizable environment"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
+msgid "Inuktitut"
+msgstr "Inuktitut"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Gefðu upp nafn prentara og lýsingu"
+msgid "Morocco"
+msgstr "Marokkó"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Which printer model do you have?"
+msgstr "Hvaða prentarategund ertu með?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
+msgid "Add a new printer"
+msgstr "Bæta við prentara"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "          All of your selected data have been          "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
+msgid "<-- Delete"
+msgstr "<-- Eyða"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Installing mtools packages..."
-msgstr "Set inn mtools pakka..."
+msgid "Nepal"
+msgstr "Nepal"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Installing SANE packages..."
-msgstr "Set inn SANE pakka..."
+msgid "cpu # "
+msgstr "cpu # "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Installing HPOJ package..."
-msgstr "Set inn HPOJ pakka..."
+msgid "chunk size"
+msgstr "stærð hlutar"
 
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "skipanir fyrir ræsingu eða 'c' fyrir skipanalínu."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "A command line must be entered!"
-msgstr "Skipanalína verður að vera!"
+msgid "Problems installing package %s"
+msgstr "Vandræði við að setja inn pakka %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Command line"
-msgstr "Skipanalína"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Þú færð póst ef álag er hærra en þetta gildi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Pipe into command"
-msgstr "Pípaa inn í skipun"
+msgid "Add a scanner manually"
+msgstr "Bæta við myndskanna handvirkt"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Detected model: %s %s"
-msgstr "Fann tegund: %s %s"
+msgid "Reload partition table"
+msgstr "Endurhlaða sneiðatöflunna"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "A valid URI must be entered!"
+msgid "Yes, I want autologin with this (user, desktop)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Device URI"
-msgstr "Slóð að prentara (URI)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "Search for fonts in installed list"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Nafn á prentara-vél eða IP"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "The port number should be an integer!"
+msgid "The Local Network did not finish with `.0', bailing out."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printer host name or IP missing!"
-msgstr "vélarnafn prentara-vélar eða IP vantar!"
+msgid "Boot"
+msgstr "Ræsing"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
+msgid "Tuner type:"
+msgstr "Útvarpstegund:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Sökkul prentara-valkostir"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Vél \"%s\", gátt %s"
+msgid "\"Menu\" key"
+msgstr "\"Menu\" lykill"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", vél \"%s\", gátt %s"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Scanning network..."
-msgstr "Leita á neti..."
+msgid "Security Administrator:"
+msgstr "Öryggisfulltrúi:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Printer auto-detection"
-msgstr "Finna prentara sjálfkrafa"
+msgid "Please enter your login"
+msgstr "Sláðu inn notandanafn"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "NCP queue name missing!"
+msgid "if set to yes, check permissions of files in the users' home."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "NCP server name missing!"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Heiti prentraðar"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Prentþjónn"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Til þess að geta prentað á NetWare prentara þarftu að gefa upp NetWare\n"
-"vélarheiti þjónsins (sem er ekki endilega það sama og TCP/IP vélarheitið)\n"
-"ásamt heiti prentaraðar, notandaheiti og lykilorði fyrir\n"
-"prentarann."
+msgid "Fonts copy"
+msgstr "Afrita letur"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "Viðföng NetWare prentara"
+msgid "Automated"
+msgstr "Sjálfvirkt"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "Viltu prófa stillingarnar?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
 "\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SECURITY WARNING!"
-msgstr "ÖRYGGISAÐVÖRUN!"
+msgid "Save packages selection"
+msgstr "Vista val á pakkahóp"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Samba share name missing!"
-msgstr ""
+msgid "Remove the last item"
+msgstr "Fjarlægja síðasta hlut"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "User list to restore (only the most recent date per user is important)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detected"
-msgstr "Fundinn sjálfkrafa"
+msgid "No net boot images created!"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Workgroup"
-msgstr "Vinnuhópur"
+msgid "use pptp"
+msgstr "nota pptp"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Share name"
-msgstr "Sameignarheiti"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Veldu þær þjónustur sem skal sjálfkrafa keyra við ræsingu"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SMB server IP"
-msgstr "Vistfang SMB þjóns"
+msgid "Learn how to use this printer"
+msgstr "Læra hvernig á að nota þennann prentara"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SMB server host"
-msgstr "Heiti SMB þjóns"
+msgid "Configure the network now"
+msgstr "Stilla nettengingu núna"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Veldu spegilvélina þaðan sem á að sækja pakkanna"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
-"Til þess að geta prentað á SMB prentara þarftu að gefa\n"
-"upp SMB vélarheiti þjónsins (sem er ekki endilega það\n"
-"sama og TCP/IP vélarheitið en oftast) og jafnvel IP vistfang prentþjónsins\n"
-"ásamt samnýtingarheiti prentarans, notandaheiti, lykilorði og\n"
-"vinnuhópsupplýsingum fyrir prentarann."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB/Windows 9x/NT prentviðföng"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Prentari \"%s\" á miðlara \"%s\""
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", prentari \"%s\" á miðlara \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Hvaða geira viltu færa gögn til?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Remote printer name missing!"
-msgstr "Nafn vantar á fjartengdan prentara!"
+msgid "Do you want to click on this button?"
+msgstr "Viltu smella á þennan hnapp?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remote host name missing!"
-msgstr "Vélarnafn vantar á prentþjón!"
+msgid "Bahamas"
+msgstr "Bahamaeyjar"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote printer name"
-msgstr "Vélarnafn fjartengds prentara"
+msgid "Manual configuration"
+msgstr "Handvikr uppsetning"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Remote host name"
-msgstr "Vélarnafn þjóns"
+msgid "search"
+msgstr "leita"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
 msgstr ""
-"Til þess að nota fjartengda lpd prentröð þarftu að gefa\n"
-"upp vélarheiti prentþjónsins og prentröðina á þeim sem\n"
-"þú vilt senda prentverkin í."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Manual configuration"
-msgstr "Handvikr uppsetning"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installation display driver)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Þú verður að velja/gefa upp prentara/prenttæki!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Zerocont vélarheiti má ekki innihalda ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
-" (hliðtengd port: /dev/lp0, /dev/lp1, ..., samsvarar LPT1:, LPT2:, ..., 1. "
-"USB prentari: /dev/usb/lp0, 2.USB prentari: /dev/usb/lp1, ...)."
+"Syslog er kerfisþjónusta sem mörg forrit nota til að skrá skilaboð\n"
+"í ýmsa kerfisannála.. Það er góð hugmynd að hafa syslog alltaf keyrandi."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Veldu hvaða tengi er prentarinn er tengdur við"
+msgid "Unknown/Others"
+msgstr "Óþekkt/annað"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
+msgid "No TV Card detected!"
+msgstr "Ekkert sjónvarpskort fannst!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Veldu prentara sém á að fá send prentverkin"
+msgid "Options"
+msgstr "Valkostir"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "The printer \"%s\" is set as the default printer now."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid ""
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
 msgstr ""
 
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Ætt örgjörva (þ.e. 8 fyrir PentiumIII,...)"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "Auto-detected"
+msgstr "Fundinn sjálfkrafa"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Eftirfarandi prentari fannst. "
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10664,869 +10489,724 @@ msgid ""
 "name in the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "Neita"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
+msgstr "HardDrake athugar vélbúnað og stillir ný og breytt jaðartæki."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
 #, c-format
-msgid "Available printers"
-msgstr "Tiltækir prentarar"
+msgid "Remote Printers"
+msgstr "Fjartengdir prentarar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "No printer found!"
-msgstr "Enginn prentari fannst!"
+msgid "Creating and formatting file %s"
+msgstr "bý til og forsníð skrá %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "You must enter a device or file name!"
+msgid "if set to yes, check additions/removals of sgid files."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Local Printer"
-msgstr "Staðbundinn prentari"
+msgid "Choose an existing LVM to add to"
+msgstr "Veldu LVM sem til er fyrir til að bæta við"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "USB printer \\#%s"
-msgstr "USB prentari \\#%s"
+msgid "xfs restart"
+msgstr "enduræsi xfs"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Prentari á raðtengi - port \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Prentari á \"%s\" SMB/Windows 95/98/NT \"%s\""
+msgid "No partition available"
+msgstr "Engin tiltæk disksneið"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netprentari \"%s\", gátt %s"
+msgid "Use the scanners on hosts: "
+msgstr "Nota myndskanna á vélum: "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Detected %s"
-msgstr "Skyjnaði %s"
+msgid "Unselected All"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", prentari á \"%s\" SMB/Windows 95/98/NT \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Nafnauppflettingar léns"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", netprentari \"%s\", gátt %s"
+msgid "Encryption key (again)"
+msgstr "Dulritunarlykill (aftur)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Detection in progress"
+msgstr "Leitun í gangi"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Build Whole Kernel -->"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Finna sjálfkrafa staðværa prentara"
+msgid "Welcome to %s"
+msgstr "Velkomin(n) að %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Settu uppfærslu-diskling í drif %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
+"The following printer\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
 msgstr ""
+"Eftirfarandi prentari\n"
+"\n"
+"%s%s\n"
+"er tengdur beint við tölvuna þína"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
+msgid "Printer sharing on hosts/networks: "
+msgstr "Samnýting prentara á vél/neti: "
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ")"
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
+"Í sumum tilfellum þarf rekillinn %s auka viðföng svo hann virki rétt,\n"
+" þó hann virki vel í flestum tilfellum án þeirra.  Viltu setja inn auka\n"
+" viðföng eða leyfa reklinum sjálfum að leita að þeim upplýsingum sem\n"
+" hann þarf?  Stundum frystir sjálfvirk stilling vélina en það ætti ekki\n"
+"að skemma neitt."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid " on "
+msgid "Not the correct CD label. Disk is labelled %s."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "("
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
+msgstr "Veldu prenttengingu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configuring printer ..."
-msgstr "Setja upp prentara..."
+msgid "Cuba"
+msgstr "Kúba"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Searching for new printers..."
 msgstr "Leita að nýjum prenturum..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
+msgid "Belize"
+msgstr "Belís"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid " (multi-session)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Viltu virkja prentun á ofangreindum prenturum?\n"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Viltu virkja prentun á prenturum á staðarnetinu?\n"
+msgid "Kernel Boot Timeout"
+msgstr "Kjarna ræsibið:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
 msgstr ""
-" (vertu viss um að allir þínir prentarar séu tengdir og kveikt á þeim).\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "Ungverskt"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
+"Veldu þjónustuaðila.\n"
+"Ef hann er ekki á lista, veldu 'Ekki á lista'"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Sjálfvirk tímastilling (með NTP)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Eftirfarandi prentari\n"
-"\n"
-"%s%s\n"
-"er tengdur beint við tölvuna þína"
+msgid "8 MB"
+msgstr "8 MB"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Eftirfarandi prentarar\n"
-"\n"
-"%s%s\n"
-"eru tengdir beint við tölvuna þína"
+msgid "LDAP Server"
+msgstr "LDAP þjónn"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
 msgstr ""
-"Eftirfarandi prentarar\n"
-"\n"
-"%s%s\n"
-"eru tengdir beint við tölvuna þína"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "og %d óþekktir prentarar"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "og einn óþekktur prentari"
+"PCMCIA þjónusta er venjulega til að styðja við hluti eins og netkort\n"
+"og mótöld á ferðavélum.  Þessi þjónusta fer ekki af stað nema hún sé\n"
+"stillt svo það er í lagi að hafa þetta á vélum sem þarfnast þess ekki."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Checking your system..."
-msgstr "Athuga tölvuna þína..."
+msgid "Choose your country"
+msgstr "Veldu þér land"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restarting CUPS..."
+msgid ""
+"\n"
+"- System Files:\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Standalone Tools"
+msgstr "Sjálfstæð tæki"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
+msgid "Where"
+msgstr "Hvar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Uppgefið IP-vistfang er ekki rétt.\n"
+msgid "but not matching"
+msgstr "en passar ekki við"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Server IP missing!"
-msgstr "IP-vistfang miðlara vantar!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Hér getur þú valið annan rekil (annað hvort OSS eða ALSA) fyrir hljóðkortið "
+"þitt (%s)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "Stilli PCMCIA kort..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu vantar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Tengjast fjartengdum prenturum á CUPS þjónum"
+msgid "Encryption key"
+msgstr "Dulritunarlykill"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Remove selected server"
-msgstr "Fjarrlægja valinn prentara"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Edit selected server"
-msgstr "Breyta völdum prentara"
+msgid "Christmas Island"
+msgstr "Jólaeyjar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Add server"
-msgstr "Bæta við miðlara"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Innsetning ræsiforrits brást sökum eftirfarandi villu:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI rás"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Setja þennan prentara sjálfgefinn"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "disksneið %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Taugaveiklað"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Host/network IP address missing."
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "<-- Del User"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Sharing of local printers"
-msgstr "Deila staðbundnum prenturum"
+msgid "Location on the bus"
+msgstr "Staðsetning á braut"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove selected host/network"
-msgstr "Fjarlægja valda vél/net"
+msgid "No printer found!"
+msgstr "Enginn prentari fannst!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit selected host/network"
-msgstr "Breyta valinni vél/neti"
+msgid "the vendor name of the device"
+msgstr "tækisnafn framleiðanda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr "Bæta við vél/neti"
+msgid "Erase entire disk"
+msgstr "Eyða öllu á disknum"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Sjálfgefið)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Sjáfvirk leiðrétting á CUPS uppsetningu"
+msgid "Automatic reconfiguration"
+msgstr "Sjálfvirk enduruppsetning"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Breyta prentkerfinu"
+msgid "Receiving Speed:"
+msgstr "Móttökuhraði:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
+msgid "Turks and Caicos Islands"
+msgstr "Turks og Kaikós eyjar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "None"
-msgstr "Enginn"
+msgid "permissions"
+msgstr "heimildir"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Additional CUPS servers: "
-msgstr "Aðrir CUPS þjónar: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Engar fjarlægar vélar"
+msgid "<- Previous"
+msgstr "<- Fyrri"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Custom configuration"
-msgstr "Sérsniðin uppsetning"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Veldu prenttengingu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Samnýting prentara á vél/neti: "
+msgid "Toggle between flat and group sorted"
+msgstr "Víxla milli flats lista og raðaðra hópa"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Themes"
+msgstr "Þemu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Options: %s"
+msgstr "Valkostir: %s"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
 msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
+msgstr "Veldu prenttengingu"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+msgid "OKI winprinter configuration"
+msgstr "OKI winprinter stillingar"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "CUPS prentari samnýtingarstillingar"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "Saint Helena"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Security Level"
+msgstr "Öryggisstig"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
+"Sum skref eru ennþá eftir.\n"
+"\n"
+"Viltu virkilega hætta núna?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "How is the printer connected?"
-msgstr "Hvernig er þessi prentari tengdur?"
+msgid "Sudan"
+msgstr "Súdan"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "Veldu prenttengingu"
+msgid "Polish (qwertz layout)"
+msgstr "Pólskt (qwertz)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "Sýrland"
 
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
 "\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the shell timeout. A value of zero means no timeout."
 msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Velkomin(n) i %s styrikerfis-raesistjorann!\n"
+"\n"
+"Sladu a <TAB> til ad fa lista yfir mogulega valkosti.\n"
+"\n"
+"Til raesa einn af theim, sladu inn nafnid og sidan a <ENTER>\n"
+"eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
 "\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portúgalskt"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Skráarnafn sýndardisks: "
 
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Vistfang DNS-þjóns á að vera á sniðinu 1.2.3.4"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Serbia"
+msgstr "Serbía"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Newzealand"
+msgstr "Nýja sjáland"
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Þessi mappa ætti að vera í rótarskráarkerfinu"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "CapsLock key"
+msgstr "CapsLock lykill"
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Setja inn ræsihlaðara"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Veldu minnisstærð skjákortsins"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "Dynamic IP Address Pool:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM nafn?"
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Nokkur tæki í \"%s\" vélbúnaðarhlutanum voru fjarlægð:\n"
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Fann %s %s tengi"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid "sticky-bit"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "Post Install"
+msgstr "Eftir innsetningu"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "The internal domain name"
+msgstr "Nafn staðbundins léns"
 
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Kort IRQ"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
 "\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Veldu disklingadrifið sem þú vilt nota til að gera ræsidisk"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO með textavalmynd"
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "Allt (enginn eldveggur)"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Þú verður að skilgreina ræsikjarna"
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid ", multi-function device on USB"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Do"
+msgstr "Áfram"
 
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Hef samband við vélina til að sækja lista yfir fáanlega pakka"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litháenískt AZERTY (gamalt)"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasilískt (ABNT 2)"
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
+"y hnit framvindusúlu\n"
+"á efra vinstra horni"
 
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "System installation"
+msgstr "Kerfisuppsetning"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent og Grenadín"
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Skrá/_Opna"
 
 #: ../../security/help.pm:1
 #, c-format
@@ -11537,820 +11217,695 @@ msgid ""
 "to the X server on the tcp port 6000 or not."
 msgstr ""
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Location of auto_install.cfg file"
+msgstr "Staðsetning auto_install.cfg skrár"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid "Open Firmware Delay"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
+msgid "Hungary"
+msgstr "Ungverjaland"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
+msgid "Total progess"
+msgstr "Framvinda alls"
 
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
+msgid "Color configuration"
+msgstr "Litauppsetning"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Security Administrator (login or email)"
-msgstr ""
+msgid "New Zealand"
+msgstr "Nýja Sjáland"
 
 #: ../../security/level.pm:1
 #, c-format
 msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr ""
+"Það eru nú þegar nokkrar takmarkanir og sjálfvirkar prófanir eru keyrðar á "
+"hverri nóttu."
 
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Nota libsafe fyrir þjóna"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Öryggisþrep"
-
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose the desired security level"
-msgstr "Vinsamlega veldu öryggisþrep"
+msgid "please choose the date to restore"
+msgstr "Gefðu upp dagsetningu sem á að endurheimta"
 
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec grunnvalkostir"
+msgid "Switching from ext2 to ext3"
+msgstr "Breyti frá ext2 í ext3"
 
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Líkt fyrra þrepi, en kerfið er nú alveg lokað og öryggið er á hæsta stigi."
+msgid "LPRng"
+msgstr "LPRng"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Á þessu öryggisstigi er orðið mögulegt að nota tölvuna sem þjón.\n"
-"Öryggið er nógu nógu mikið til að taka við fyrirspurnum frá\n"
-"mörgum biðlum.  Athugið: ef vélin þín er biðlari á Internetinu\n"
-"þá ættir þú að velja lægra öryggisþrep"
+msgid "Netherlands Antilles"
+msgstr "Holland, Antilleyjar"
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+msgid "Browse to new restore repository."
 msgstr ""
-"Það eru nú þegar nokkrar takmarkanir og sjálfvirkar prófanir eru keyrðar á "
-"hverri nóttu."
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
-"Þetta er hið hefðbundna öryggi sem mælt er með fyrir tölvu sem verður notuð\n"
-"til að tengja við netið sem biðill."
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lykilorð eru nú virk, en ekki er mælt með notkun að tölvan sé nettengd."
+msgid "and %d unknown printers"
+msgstr "og %d óþekktir prentarar"
 
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
-"Þetta þrep verður að nota með varúð. Það gerir einfalt að nota tölvuna\n"
-"þína, en hún verður mjög viðkvæm.  Hún ætti ekki að vera tengd öðrum\n"
-"tölvum á netinu.  Engra lykilorða er krafist."
+"Eldri Pentium örgjörvar voru með villu í fleytitölu-örgjörva sem olli "
+"ónákvæmni í útreikningum þegar fleytitöludeiling var framkvæmd (FDIV)"
 
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Paranoid"
-msgstr "Taugaveiklað"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Ekkert ISDN-PCI kort fannst. Vinsamlega veldu eitt á næsta skjá."
 
-#: ../../security/level.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Higher"
-msgstr "Hærra"
+msgid "GB"
+msgstr "GB"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "High"
-msgstr "Hátt"
+msgid "Please give a user name"
+msgstr "Vinsamlega sláðu inn notandanafn"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Poor"
-msgstr "Lélegt"
+msgid "Enable CD Boot?"
+msgstr "Virkja CD ræsingu?"
 
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "Velkomin(n) í tölvuþrjótinn"
+msgid " enter `void' for void entry"
+msgstr " sláið inn 'void' fyrir autt val"
 
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Stimplaðu þig aftur inn í %s til að virkja breytingarnar"
+msgid "on Hard Drive"
+msgstr "á harðan disk"
 
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Stimplaðu þig út og sláðu á Ctrl-Alt-Backspace"
+msgid "Winmodem connection"
+msgstr "Winmodem tenging"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr ""
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Nú getur þú keyrt xawtv (undir X!) !\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Ekki nægjanlegt diskminni fyrir innsetningu.  Bættu við það"
 
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No floppy drive available!"
-msgstr "Ekkert disklingadrif aðgengilegt!"
+msgid "%s on %s"
+msgstr "%s á %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
-msgid "Floppy can be removed now"
-msgstr "Það má fjarlægja diskling núna"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Couldn't access the floppy!"
-msgstr ""
+msgid "Which is your timezone?"
+msgstr "Hvert er þitt tímabelti?"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please insert floppy disk:"
-msgstr "Settu diskling í drif:"
+msgid "Guinea"
+msgstr "Gínea"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Write Config"
-msgstr "Skrifa stillingar"
+msgid "The system is now connected to the Internet."
+msgstr "Kerfið er nú tengt Internetinu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Suður Georgía og suður samlokueyjar"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
+msgid "Japan (broadcast)"
+msgstr "Japan (loftnet)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd miðlara uppsetning"
+msgid "Mozambique"
+msgstr "Mósabmbík"
 
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
 #, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "Icon"
+msgstr "Táknmynd"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "IP Range Start:"
-msgstr ""
+msgid "Please choose what you want to backup"
+msgstr "Veldu hvað þú vilt afrita"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Name Servers:"
-msgstr "Nafnaþjónar:"
+msgid "256 colors (8 bits)"
+msgstr "256 litir (8 bits)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
 #, c-format
-msgid "Domain Name:"
-msgstr "Nafn léns:"
+msgid "Read-write"
+msgstr "Les-skrif"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Broadcast Address:"
-msgstr "Útvörpunarvistfang:"
+msgid "Size: %s\n"
+msgstr "Stærð: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr "Staðarnetsía:"
+msgid "Hostname: "
+msgstr "Vélarnafn: "
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Routers:"
-msgstr "Beinar:"
+msgid "Chunk size %s\n"
+msgstr "Hlunkastærð %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Netmask:"
-msgstr "Netsía:"
+msgid "Build the future of Linux!"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Subnet:"
-msgstr "Staðarnet:"
+msgid "Local Printer"
+msgstr "Staðbundinn prentari"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd uppsetning..."
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Delete Client"
-msgstr "Eyða biðlara"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Breyta biðlara"
+msgid "ADSL connection"
+msgstr "ADSL tenging"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add Client -->"
-msgstr "Bæta við biðlara -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Allow Thin Clients"
-msgstr ""
+msgid "Error!"
+msgstr "Villa!"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Thin Client"
-msgstr ""
+msgid "cable connection detected"
+msgstr "Breiðbandstenging skynjuð"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No net boot images created!"
+msgid "Permission denied transferring %s to %s"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "type: %s"
-msgstr "tegund: %s"
+msgid "/_Report Bug"
+msgstr "/_Senda villutilkynningu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "<-- Del User"
-msgstr ""
+msgid "Resize"
+msgstr "Breyta stærð"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Add User -->"
-msgstr "Bæta við notanda -->"
+msgid "Dominica"
+msgstr "Dominiká"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+msgid "Please enter the device name to use for backup"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Delete All NBIs"
-msgstr "Eyða öllum NBI"
+msgid "Resolution: %s\n"
+msgstr "Upplausnir: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "<-- Delete"
-msgstr "<-- Eyða"
+msgid "matching"
+msgstr "passar við"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
-msgid "This will take a few minutes."
-msgstr "Þetta tekur nokkrar mínútur."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
-msgid "Build All Kernels -->"
-msgstr "Byggja alla kjarna -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Veldu tengið sem þú vilt nota.  Tengið COM1 í MS Windows er kallað\n"
+"ttyS0 í GNU/Linux, COM2 er ttyS1, o.s.frv."
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "No NIC selected!"
-msgstr "Ekkert NIC valið!"
+msgid "The following packages are going to be removed"
+msgstr "Eftirfarandi pakkar verða fjarlægðir"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
 #, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Connect to the Internet"
+msgstr "Tengast Internetinu"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Nota núverandi disksneiðar"
 
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
+msgid "Canadian (Quebec)"
+msgstr "Kanadískt (Quebec)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "Mús: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Boot Floppy"
+msgid "Reselect correct fonts"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
+"Options Description:\n"
 "\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"Options\n"
 "\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Við ætlum nú að fara að stilla tenginguna %s."
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, fuzzy, c-format
+msgid "MandrakeExpert Corporate"
+msgstr "snillingur"
+
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 msgstr ""
+" [allt]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Finna prentara sjálfkrafa"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "Fjarlægja valda vél"
+
+#: ../../steps.pm:1
 #, c-format
-msgid "Add/Del Clients"
-msgstr ""
+msgid "Language"
+msgstr "Veldu tungumál"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Add/Del Users"
-msgstr "Bæta við/eyða notanda"
+msgid "Printer model selection"
+msgstr "Veldu prentarategund"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "Eftir breytingu á sneið %s, hafa öll gögn á þessari disksneið tapast"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Netræsi- disklingur/ISO"
+msgid "%d seconds"
+msgstr "%d sekúndur"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Stop Server"
-msgstr "Stöðva þjón"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Settu tóman diskling í drif %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Start Server"
-msgstr "Ræsa þjón"
+msgid "A valid URI must be entered!"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Disable Server"
-msgstr "Aftengja þjón"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Fann \"%s\" kort vilu nota það ?"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Enable Server"
-msgstr "Virkja þjón"
+msgid "Re-configure interface and DHCP server"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Uppsetning Mandrake skjámiðlara"
+msgid "Sound configuration"
+msgstr "Hljóðuppsetning"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove the last item"
-msgstr "Fjarlægja síðasta hlut"
+msgid "Photo test page"
+msgstr "Myndprófunarsíðu(r)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add an item"
-msgstr "Bæta við hlut"
+msgid "Custom disk partitioning"
+msgstr "Sérsniðin disksneiðing"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Auto Install"
-msgstr "Sjáfvirk innsetning"
+msgid "Enter Printer Name and Comments"
+msgstr "Gefðu upp nafn prentara og lýsingu"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
 msgstr ""
+"Eftirfarandi prentarar\n"
+"\n"
+"%s%s\n"
+"eru tengdir beint við tölvuna þína"
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Congratulations!"
-msgstr "Til hamingju!"
+msgid "type: %s"
+msgstr "tegund: %s"
 
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
+msgid "Slovakian (QWERTY)"
+msgstr "Slóvakískt (QWERTY)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid "Creating auto install floppy"
-msgstr "Bý til sjálfvirkan uppsetningar-diskling"
+msgid "No Sound Card detected!"
+msgstr "Ekkert hljóðkort fannst!"
 
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "manual"
-msgstr "handvirkt"
+msgid "Mouse Port"
+msgstr "Músartengi"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Stillingar sjálfvirkra þrepa"
-
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "replay"
-msgstr "endurspila"
+msgid "Ftp Server"
+msgstr "Ftp miðlari"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
 "\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Uppsetning sjáfvirkrar innsetningar"
-
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "I can't find needed image file `%s'."
+msgid "%s fonts conversion"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Við hvaða braut er músin þín tengd?"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Error!"
-msgstr "Villa!"
+msgid "Uganda"
+msgstr "Úganda"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (size)\n"
 "\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
 "\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Kómoros"
+
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"Description:\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
 "\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
 "\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
 "\n"
 "\n"
-msgstr ""
+"Við ætlum nú að fara að stilla tenginguna %s.\n"
+"\n"
+"\n"
+"Ýttu á 'Í lagi' til að halda áfram."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot hamur"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (kapal)"
+
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Almenn þriggja hnappa mús"
+
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+msgid "Select another media to restore from"
 msgstr ""
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Hugbúnaðarstjóri"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -12362,4639 +11917,5122 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
 " \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
+msgid "Re-submit"
+msgstr "Endursenda"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
+msgid "CD in place - continue."
+msgstr "CD á réttum stað - áfram."
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "KB"
+msgstr "KB"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Restore"
-msgstr "Endurheimta"
+msgid "Network & Internet"
+msgstr "Staðarnet og Internet"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Backup Now"
-msgstr ""
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litháenískt \"hljóðfræðilegt\" QWERTY"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Advanced Configuration"
-msgstr "Ítarlegri uppsetning"
+msgid "Net Boot Images"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Wizard Configuration"
-msgstr "Álfa- uppsetning"
+msgid "Sharing of local scanners"
+msgstr "Miðlun staðbundinna myndskanna"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "View Backup Configuration."
-msgstr "Skoða vistaða stillingu"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Plug'n Play skönnun mistókst, vinsamlega veldu réttan skjá"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Backup Now from configuration file"
-msgstr "Afrita nú frá stillingaskrá"
+msgid "Services and deamons"
+msgstr "Þjónustur og púkar"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup uppsetning"
+msgid "Remote host name missing!"
+msgstr "Vélarnafn vantar á prentþjón!"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Total Progress"
-msgstr ""
+msgid "with /usr"
+msgstr "með /usr"
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sending files..."
-msgstr "Sendi skrár..."
+msgid "Network"
+msgstr "Net"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Backup other files"
-msgstr "Afrita aðrar skrár"
+msgid "This password is too simple"
+msgstr "Þetta lykilorð er of einfalt"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Backup user files"
-msgstr "Afrita skrár notanda"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slóvakískt (QWERTZ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "Backup system files"
-msgstr "Afrita kerfisskrár"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Under Devel ... please wait."
-msgstr "Í þróun... Bíðið."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Alger lágmarksuppsetning (ekkert urpmi)"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"  Transfer  \n"
+"Now"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please select data to backup..."
-msgstr ""
+msgid "Use daemon"
+msgstr "Nota þjón"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Please select media for backup..."
-msgstr ""
+msgid "Authentication"
+msgstr "Auðkenning"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please select data to restore..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Eftirfarandi pakka þarf að setja inn:\n"
+msgid "Additional CUPS servers: "
+msgstr "Aðrir CUPS þjónar: "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
 msgstr ""
 
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Hvar viltu tengja tæki %s?"
+
 #: ../../standalone/drakbackup:1
 #, c-format
+msgid "Restore Via Network"
+msgstr "Endurheimta um net"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algería"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-stærð"
+
+#: ../../help.pm:1
+#, c-format
 msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Next"
-msgstr "Næsta"
+msgid "\tBackups use tar and gzip\n"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Previous"
-msgstr "Fyrra"
+msgid "2 MB"
+msgstr "2 MB"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Save"
-msgstr "Vista"
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+"  --no-confirmation      Ekki biðja um staðfestingu í upphafi "
+"MandrakeUpdate\n"
+"  --no-verify-rpm        Ekki staðfesta undiskriftir pakka\n"
+"  --changelog-first      Birta breytingalista á undan skráarlista í "
+"lýsingaglugga\n"
+"  --merge-all-rpmnew     Bjóðast til að bræða saman allar .rpmnew/.rpmsave "
+"skrár"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Build Backup"
-msgstr "Byggja afrit"
+msgid "Setting Default Printer..."
+msgstr "Set sjálfgefinn prentara..."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Restore Progress"
-msgstr "Framvinda endurheimtu"
+msgid "Interface %s (using module %s)"
+msgstr "Tengi %s (nota einingu %s)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Restore From Catalog"
-msgstr "Endurheimta frá lista"
+msgid "Name: %s\n"
+msgstr "Nafn: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Browse to new restore repository."
-msgstr ""
+msgid "Generating preview ..."
+msgstr "Bý til forsýn..."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "CD in place - continue."
-msgstr "CD á réttum stað - áfram."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Custom Restore"
-msgstr "Sérsniðin endurheimt"
+msgid "serial"
+msgstr "raðtengd"
 
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Restore all backups"
-msgstr "Endurheimta öll afrit"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restore Failed..."
-msgstr "Endurheimting mistókst..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgískt (\"Latínu\")"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Files Restored..."
-msgstr "Skrár endurheimtar..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Path or Module required"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
 msgstr ""
+"Þú getur núna gefið upp viðföng fyrir eininguna %s.\n"
+"Athugið að vistföng eru gefin upp með formerki 0x eins og '0x123'"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
-msgid "Hostname required"
-msgstr "Þörf er á vélarheiti"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Username required"
-msgstr "Notandanafns er þörf"
+msgid "Kenya"
+msgstr "Kenía"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Password required"
-msgstr "Lykilorðs er þörf"
+msgid "Use ``Unmount'' first"
+msgstr "Nota ``Aftengja'' fyrst"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Host Path or Module"
-msgstr ""
+msgid "Installing mtools packages..."
+msgstr "Set inn mtools pakka..."
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Host Name"
-msgstr "Vélarheiti:"
+msgid "You must specify a root partition"
+msgstr "Þú verður að hafa disksneið fyrir rótina"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "first step creation"
+msgstr "fyrsta skref"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restore Via Network"
-msgstr "Endurheimta um net"
+msgid "Both Shift keys simultaneously"
+msgstr "Báðir Shift lyklar samtímis"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Select a scanner model"
+msgstr "Veldu tegund myndskanna"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restore From Tape"
-msgstr "Endurheimta frá segulbandi"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup uppsetning"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Vista sem..."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore From CD"
-msgstr "Endurheimta frá CD"
+msgid "Korea (North)"
+msgstr "Kórea (norður)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Backup files not found at %s."
-msgstr ""
+msgid "Autologin"
+msgstr "Autologin"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
 #, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Breyta\n"
-"Slóð endurheimtu"
+msgid "System configuration"
+msgstr "Kerfisstillingar"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Endurheimta valdar\n"
-"Skrár"
+msgid "Domain Admin Password"
+msgstr "Lykilorð kerfisstjóra léns"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove user directories before restore."
-msgstr "Fjarlægja heimsvæði notanda áður en endurheimt hefst."
+msgid "Configuring printer ..."
+msgstr "Setja upp prentara..."
 
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "select path to restore (instead of /)"
-msgstr ""
+msgid "MB"
+msgstr "MB"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Restore Other"
-msgstr "Endurheimta annað"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore Users"
-msgstr "Endurheimta notendur"
+msgid "Virgin Islands (British)"
+msgstr "Jómfrúreyjar (Breskt)"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore system"
-msgstr "Endurheimta kerfið"
+msgid "Bermuda"
+msgstr "Bermúda"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Other Media"
-msgstr "Annar miðill"
+msgid "click here if you are sure."
+msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Select another media to restore from"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Restore from Hard Disk."
-msgstr "Endurheimta frá hörðum disk"
+msgid "Remove"
+msgstr "Fjarlægja"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use quota for backup files."
-msgstr "Nota kvóta fyrir afritaskrár."
+msgid "Lesotho"
+msgstr "Lesótó"
 
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
 #, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
+msgid "utopia 25"
+msgstr "utopia 25"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Please enter the directory to save:"
-msgstr "Gefðu upp möppu til vistunar:"
+msgid "Pipe job into a command"
+msgstr "Senda prentverk á skipun"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Use Hard Disk to backup"
-msgstr ""
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "nýtt breytilegt tækisnafn útgefið af kjarna devfs"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "please choose the date to restore"
-msgstr "Gefðu upp dagsetningu sem á að endurheimta"
+msgid "Yes"
+msgstr "Já"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Backup the system files before:"
-msgstr ""
+msgid "Cote d'Ivoire"
+msgstr "Cote d'Ivoire"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
+msgid "Which protocol do you want to use?"
+msgstr "Hvaða samskiptareglu viltu nota?"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "OK to restore the other files."
-msgstr ""
+msgid "Restore Progress"
+msgstr "Framvinda endurheimtu"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "         Restore Configuration       "
-msgstr "         Endurheimta uppsetningu       "
+msgid "Estonia"
+msgstr "Eistland"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Veldu vélar þar sem staðbundnir myndskannar ættu að vera aðgengilegir:"
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "          All of your selected data have been          "
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
 msgstr ""
+"Það er gat í sneiðatöflunni þinni sem ekki er hægt að nota.\n"
+"Eina lausnins er að færa aðalsneiðar svo að gatið verði við hliðina á "
+"viðbótasneið"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "Channel"
+msgstr "Rás"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "Add"
+msgstr "Bæta við"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Veldu prenttengingu"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Vinsamlega afveldu eða fjarlægðu næst"
+msgid " Error while sending mail. \n"
+msgstr " Villa við sendingu pósts. \n"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Lyklaborð"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
-"Listi af skemmdum gögnum:\n"
-"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "Veldu tenginguna sem þú vilt stilla"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Please wait, setting security level..."
+msgstr "Augnablik, stilli öryggisþrep..."
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Network by rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Stilli nettæki %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "activated"
+msgstr "Virk"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "\t-Tape \n"
-msgstr ""
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Vinsamlega veldu hvaða nettengi verða notuð fyrir dhcp miðlarann"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Leita að pökkum til að uppfæra..."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Tengipunktur: "
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
+msgid "parse all fonts"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "With X"
+msgstr "Með X"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "Fjölskjáa-uppsetning"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "\tDo not include System Files\n"
+msgid "No browser available! Please install one"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Options:\n"
+"%s"
 msgstr ""
+"Vista stillingar?\n"
+"núverandi stilling er:\n"
 "\n"
-"- Valkostir:\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Þú getur ekki notað ReiserFs á disksneiðar minni en 32MB"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
+"rwho gefur fjarstöddum notendum lista af notendum sem eru\n"
+"stimplaðir inn á vélina (svipað finger)."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Domain name"
+msgstr "Nafn léns"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Sharing of local printers"
+msgstr "Deila staðbundnum prenturum"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " on device: %s"
-msgstr " á tæki: %s"
+msgid "Available printers"
+msgstr "Tiltækir prentarar"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Tóm"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Burn to CD"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "text width"
+msgstr "Textabreidd"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "Hvar viltu tengja tæki %s?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
+msgid "The default lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "Tengi \"%s\""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Með grunn handbókum (mælt með!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 hnappur"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Prófa"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Korea"
+msgstr "Kórea"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Backup Users"
-msgstr ""
+msgid "Your choice? (default `%s'%s) "
+msgstr "Þitt val? (sjálfgefið %s'%s) "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup system"
-msgstr "Afrita kerfi"
+msgid "Raw printer"
+msgstr "Hrár prentari"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Uppgefið örgjörvanafn framleiðanda"
+
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Please choose what you want to backup"
-msgstr "Veldu hvað þú vilt afrita"
+msgid "Vendor"
+msgstr "Framleiðandi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "on Tape Device"
-msgstr "á segulband"
+msgid "Interface %s"
+msgstr "Tengi %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "on CDROM"
-msgstr "á geisladisk"
+msgid "Configure mouse"
+msgstr "Tilgreindu mús"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "across Network"
-msgstr "yfir net"
+msgid "Choose the mount points"
+msgstr "Veldu tengipunktana"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "on Hard Drive"
-msgstr "á harðan disk"
+msgid "OK"
+msgstr "Í lagi"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please choose where you want to backup"
-msgstr "Veldu hvert þú vilt taka afrit"
+msgid "Yugoslavian (latin)"
+msgstr "Júgoslavneskt (Latínu upps.)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "More Options"
-msgstr "Fleiri valkostir"
+msgid "Installing"
+msgstr "Set inn"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "When"
-msgstr "Hvenær"
+msgid "Launch userdrake"
+msgstr "Ræsa userdrake"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Where"
-msgstr "Hvar"
+msgid "Is this an install or an upgrade?"
+msgstr "Er þetta innsetning eða uppfærsla?"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Innvært ISDN mótald"
+
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "What"
-msgstr "Hvað"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
 msgstr ""
+"Til hamingju, staðarnets og Internets uppsetningu er lokið.\n"
+"Uppsetnigin verður nú gerð virk.\n"
+"\n"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Send mail report after each backup to:"
+msgid "\t-Hard drive.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
 "\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Veldu miðil\\ fyrir afrit."
+msgid "Printer on remote CUPS server"
+msgstr "Prentari fjartengdur á CUPS þjóni"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Use daemon"
-msgstr "Nota þjón"
+msgid "delete"
+msgstr "eyða"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "monthly"
-msgstr "mánaðarlega"
+msgid "here if no."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "weekly"
-msgstr "vikulega"
+msgid "DHCP host name"
+msgstr "DHCP vélarheiti:"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "daily"
-msgstr "daglega"
+msgid "The maximum lease (in seconds)"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "hourly"
-msgstr "hverri klst"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Við hvaða raðtengi er músin þín tengd?"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "HardDrive / NFS"
+msgid "Did it work properly?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Poor"
+msgstr "Lélegt"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Gefðu upp möppu til vistunar:"
+msgid "The DHCP start range"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Krossaðu hér við ef þú vilt ýta segulbandi út eftir afritun."
+msgid "Grenada"
+msgstr "Grenada"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Krossaðu hér við ef þú vilt eyða öllum gögnum á bandi fyir afritun."
+msgid "Unsafe"
+msgstr "Óöruggt"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Krossaðu hér við ef þú vilt nota 'non-rewinding' tækið"
+msgid ", %s sectors"
+msgstr ", %s geirar"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "No"
+msgstr "Nei"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use tape to backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No CD device defined!"
-msgstr "Ekkert CD tæki valið!"
+msgid "Guadeloupe"
+msgstr "Gvadalúp"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "could not find any font.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Krossaðu hér við ef þú ert að nota DVDRAM tæki"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Viltu að Backspace lykilinn skili Delete í skjáham?"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Krossaðu hér við ef þú ert að nota DVDR tæki"
+msgid "Vertical refresh rate"
+msgstr "Lóðrétt tíðni"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
 #, c-format
-msgid " Erase Now "
-msgstr " Eyða núna "
+msgid "Entering step `%s'\n"
+msgstr "Hef skref `%s'\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Krossaðu hér við ef þú vilt eyða gögnum á RW miðli (1. sinn)"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Krossaðu hér við ef þú ert að nota CDRW miðil"
+msgid "Removing %s ..."
+msgstr "Fjarlægi %s..."
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Smelltu á disksneið"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Níger"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Gefðu upp stærð CD/DVD diska (Mb)"
+msgid "No printer"
+msgstr "Enginn prentari"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "alert configuration"
+msgstr "Uppsetning viðvaranna"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "Viðföng NetWare prentara"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "%s BootSplash (%s) preview"
+msgstr "%s Smellimerki (%s) forsýn"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Remember this password"
-msgstr "Muna þetta lykilorð"
+msgid "General"
+msgstr "Almennt"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please enter your password"
-msgstr "Sláðu inn þitt lykilorð"
+msgid "Printing system: "
+msgstr "Prentkerfi:"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Please enter your login"
-msgstr "Sláðu inn notandanafn"
+msgid "Add a user"
+msgstr "Bæta við notanda"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
+msgid "Network configuration (%d adapters)"
+msgstr "Netstillingar (%d tengi)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Please enter the host name or IP."
-msgstr "Sláðu inn nafn vélar eða IP."
+msgid "Mandatory package %s is missing"
+msgstr "Vantar nauðsynlegan pakka %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Philippines"
+msgstr "Filippseyjar"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Í lagi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Heiti prentraðar"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Viltu nota aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Hvít-Rússneskt"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"  Transfer  \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Flytja skrár á nýju disksneiðina"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Restore From Catalog"
+msgstr "Endurheimta frá lista"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Net Method:"
-msgstr ""
+msgid "Pitcairn"
+msgstr "Pitcairn"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use network connection to backup"
-msgstr "Nota nettengingu til afritunar"
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Users"
-msgstr "Notendur"
+msgid "group :"
+msgstr "hópur :"
 
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "tenging disksneiðar %s í möppu %s mistókst"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
+msgid "Lilo screen"
 msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid "Remove Selected"
-msgstr "Fjarlægja valið"
+msgid "LILO with graphical menu"
+msgstr "LILO með grafískri valmynd"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Estimating"
+msgstr "Áætla"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "Þú getur ekki afvalið þennan pakka hann er þegar uppsettur"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", prentari á \"%s\" SMB/Windows 95/98/NT \"%s\""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Viltu samt halda áfram?"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Leita að fáanlegum pökkum og endurbyggi rpm gagnagrunn..."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup your System files. (/etc directory)"
+msgid "Does not appear to be recordable media!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Specify options"
+msgstr "Stilla handvirkt"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatú"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
+"Sérsmíðaður ræsidisklingur gerir þér kleyft að ræsa Linux án þess að nota "
+"ræsistjóra\n"
+" eins og SLILO. Þetta kemur að gagni ef þú vilt ekki setja upp SLILO á "
+"vélinni eða ef\n"
+" annað stýrikerfi hefur fjarlægt SLILO eða SLILO virkar ekki með þínum "
+"vélbúnaðarstillingum.\n"
+" Ræsidiskling má einnig nota með Mandrake Linux 'rescue' disklingnum svo "
+"hægt sé að bjarja\n"
+" vélinni ef alvarleg vandamál koma upp.\n"
+"Viltu búa til ræsidiskling fyrir vélina þína?"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Þú getur ekki notað dulritað skráarkerfi á tengipunkt %s"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "File Selection"
-msgstr "Skráaval"
+msgid "Norfolk Island"
+msgstr "Norfolk eyjar"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Theme installation failed!"
+msgstr "Uppsetning þema mistókst!"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid " Error while sending mail. \n"
-msgstr " Villa við sendingu pósts. \n"
+msgid "Nothing to do"
+msgstr "Ekkert að gera"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "Nota fyrir sýndardisk"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake villutilkynningar-tól"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr "nota pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Færi skrár á nýju disksneiðina"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
 msgstr ""
 
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Ítarlegra"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Flutningur"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Sænskt)"
+
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "More Options"
+msgstr "Fleiri valkostir"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afganistan"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Delete Hard Drive tar files after backup to other media."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No changes to backup!"
-msgstr ""
+msgid "Burundi"
+msgstr "Búrúndi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Afritaskrár á hörðum diski..."
+msgid "Add Client -->"
+msgstr "Bæta við biðlara -->"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Backup Other files..."
-msgstr "Afrita aðrar skrár..."
+msgid "Read carefully!"
+msgstr "Lestu vandlega!"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr ""
+msgid "RW"
+msgstr "RW"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Backup User files..."
-msgstr "Afrita skrár notanda..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Vinsamleg,\n"
+"gefðu upp sjónvarpstaðal og land"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Backup system files..."
-msgstr "Afrita kerfisskrár..."
+msgid "Port"
+msgstr "Port"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "No tape in %s!"
-msgstr "Ekkert segulband í %s!"
+msgid "No (experts only)"
+msgstr "Nei (aðeins f. sérfræðinga)"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Permission problem accessing CD."
+msgid "No kernel selected!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Ýttu á Enter til að ræsa valið stýrikerfi, eða 'e' til að breyta"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Not erasable media!"
+msgid "Set-GID"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
+msgid "The encryption keys do not match"
+msgstr "Dulritunarlyklarnir eru mismunandi"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Right \"Windows\" key"
+msgstr "Hægri \"Windows\" lykill"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check empty password in /etc/shadow."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "WebDAV transfer failed!"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "WebDAV remote site already in sync!"
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Total progess"
-msgstr "Framvinda alls"
+msgid "Resolutions"
+msgstr "Upplausnir"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"drakfirewall configurator\n"
 "\n"
-"without being prompted for a password."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
 msgstr ""
+"drakfirewall stillingar\n"
+"\n"
+"Þessi eining stillir prívat eldvegg fyrir þessa Mandrake Linux vél\n"
+"Fyrir öruggan og aflmikinn eldvegg líttu á hina sértæku\n"
+"Mandrake eldveggs útgáfu."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "%s not responding"
+msgid ""
+"Please enter your username, password and domain name to access this host."
 msgstr ""
+"Vinsamlega gefðu upp notandanafn, lykilorð og nafn léns til að fá aðgang að "
+"þessum miðlara"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Can't find %s on %s"
-msgstr "Finn ekki %s á %s"
+msgid "Remove selected host"
+msgstr "Fjarlægja valda vél"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
+msgid "Network configuration"
+msgstr "Netstillingar"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bad password on %s"
-msgstr "Rangt lykilorð á %s"
+msgid "No sharing"
+msgstr "Engin miðlun"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
+msgid "Move selected rule down one level"
+msgstr "Færa valda reglu niður um eitt þrep"
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr ""
+msgid "TB"
+msgstr "TB"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
+msgid "Please check if you are using a DVDR device"
+msgstr "Krossaðu hér við ef þú ert að nota DVDR tæki"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
+msgid "FATAL"
+msgstr "BANVÆNT"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
 "\n"
-"                    DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Eyða"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
 #, c-format
 msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
 msgstr ""
+"Ég get stillt tölvuna þína til að kveikja sjálfvirkt á X við ræsingu\n"
+"Vilt þú kveikja á X við endurræsingu?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "INFO"
-msgstr "Upplýsingar"
+msgid "Build the disk"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "FATAL"
-msgstr "BANVÆNT"
+msgid "Disconnect %s"
+msgstr "Aftengist %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "WARNING"
-msgstr "AÐVÖRUN"
+msgid "Status:"
+msgstr "Staða:"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "HTTP proxy"
+msgstr "HTTP sel:"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Innsetning %s brást sökum eftirfarandi villu:"
+msgid "SSH Server"
+msgstr "SSH Þjónn"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No, I don't want autologin"
+msgid "\t-Network by rsync.\n"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
+msgid "European protocol"
+msgstr "Evrópskan samskiptastaðal"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", prentari \"%s\" á miðlara \"%s\""
 
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
-msgid "System mode"
-msgstr ""
+msgid "Error"
+msgstr "Villa"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bootsplash"
-msgstr ""
+msgid "allow \"su\""
+msgstr "leyfa \"su\""
 
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Lilo screen"
-msgstr ""
+msgid "Australia"
+msgstr "Ástralía"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
+msgid "please wait during ttmkfdir..."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Themes"
-msgstr "Þemu"
+msgid "Configure only card \"%s\"%s"
+msgstr "Stilla aðeins kort \"%s\"%s"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Splash selection"
-msgstr "Val á smelliglugga"
+msgid "Level"
+msgstr "Stig"
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Veldu prenttengingu"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Change the printing system"
+msgstr "Breyta prentkerfinu"
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
 msgstr ""
+"Kerfið styður við marga skjái samtímis.\n"
+"Hvað viltu gera?"
 
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Theme installation failed!"
-msgstr "Uppsetning þema mistókst!"
+msgid "Configure services"
+msgstr "Setja upp þjónustur"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Notice"
-msgstr "Tilkynning"
+msgid "Broadcast Address:"
+msgstr "Útvörpunarvistfang:"
 
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Relaunch 'lilo'"
-msgstr ""
+msgid "mount failed: "
+msgstr "tókst ekki að tengja: "
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr ""
+msgid "Image"
+msgstr "Ræsikjarna"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Fjarvinnsla"
+
+#: ../../modules.pm:1
 #, c-format
 msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Write %s"
-msgstr "Skrifa %s"
+msgid "Selected All"
+msgstr "Allt valið"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Lilo message not found"
-msgstr ""
+msgid "Webmin Service"
+msgstr "Webmin Þjónusta"
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "device"
+msgstr "tæki"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
+msgid "All"
+msgstr "Allt"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Create new theme"
-msgstr "Búa til nýtt þema"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Hvaða prentkerfi (biðraðastjóra) viltu nota?"
 
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
+msgid "Greece"
+msgstr "Grikkland"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Install themes"
-msgstr "Setja inn þema"
+msgid "An error occurred"
+msgstr "Villa kom upp"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub hamur"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"það verður að uppfæra þennan pakka\n"
+"Ertu viss um að þú viljir afvelja hann?"
 
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot hamur"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamílskt (ritvélaruppsetning)"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "<control>Q"
-msgstr "<Ctrl>Q"
+msgid "manual"
+msgstr "handvirkt"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/File/_Quit"
-msgstr "/Skrá/_Hætta"
+msgid "Printer manufacturer, model, driver"
+msgstr ""
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "/_File"
-msgstr "/_Skrá"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Boot Style Configuration"
-msgstr "Uppsetning ræsistíls"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Mappa %s inniheldur nú þegar gögn\n"
+"(%s)"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "No browser available! Please install one"
-msgstr ""
+msgid "Printer on NetWare server"
+msgstr "Prentari á NetWare miðlara"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "tengist bugzilla álfi..."
+msgid "Give the ram size in MB"
+msgstr "Sláðu inn vinnsluminni í MB"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Package not installed"
-msgstr "Pakki ekki settur inn"
+msgid "Real name"
+msgstr "Nafn notanda"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Not installed"
-msgstr "Ekki settur inn"
+msgid "done"
+msgstr "lokið"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Standalone Tools"
-msgstr "Sjálfstæð tæki"
+msgid "Please uncheck or remove it on next time."
+msgstr "Vinsamlega afveldu eða fjarlægðu næst"
 
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Report"
-msgstr "Skýrsla"
+msgid "Higher"
+msgstr "Hærra"
 
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Veldu þær disksneiðar sem á að forsníða"
+
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
 "\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
+"Ekkert sjónvrpskort hefur fundist á vélinni þinni.  Vinsamlega athugið hvort "
+"sjónvarpskort sem stutt er af Linux sé rétt tengt og uppsett.\n"
+"\n"
+"\n"
+"Þú getur leitað í vélbúnaðargagnagrunni á:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Release: "
-msgstr "Útgáfa: "
+msgid "Can't find %s on %s"
+msgstr "Finn ekki %s á %s"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Kernel:"
-msgstr "Kjarni:"
+msgid "Japanese 106 keys"
+msgstr "Japanskt 106 lykla"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Package: "
-msgstr "Pakki: "
+msgid "This will take a few minutes."
+msgstr "Þetta tekur nokkrar mínútur."
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Application:"
-msgstr "Forrit:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Configuration Wizards"
-msgstr "Stilli-álfar"
+msgid "Use scanners on remote computers"
+msgstr "Nota myndskanna á öðrum vélum"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Eyða valinni reglu"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Windows Migration tool"
-msgstr "Windows flutningstól"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Tengjast fjartengdum prenturum á CUPS þjónum"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Settu tóman diskling í drif %s"
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Software Manager"
-msgstr "Hugbúnaðarstjóri"
+msgid "Maldives"
+msgstr "Maldíví"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remote Control"
-msgstr "Fjarstýring"
+msgid "compact"
+msgstr "samþjappað"
 
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
 #, c-format
-msgid "Msec"
-msgstr "Msek"
+msgid "1 minute"
+msgstr "1 mínútu"
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "á gagnabraut %d id %d\n"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake beint"
+msgid ", multi-function device"
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
 
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Synchronization tool"
+msgid "There is no FAT partition to resize (or not enough space left)"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "First Time Wizard"
-msgstr ""
+msgid "Up"
+msgstr "Upp"
 
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake Stjórnborð"
+msgid "Firewall"
+msgstr "Eldveggur"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake villutilkynningar-tól"
+msgid "Area:"
+msgstr "Svæði:"
 
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Parameters"
-msgstr "Viðföng"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA stýringar"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "Internet uppsetning"
+msgid "Printer Server"
+msgstr "Prentþjónn"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "DHCP Client"
-msgstr "DHCP biðlari"
+msgid "Disconnection from the Internet complete."
+msgstr "Aftengingu frá Internetinu lokið"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
+msgid "Custom configuration"
+msgstr "Sérsniðin uppsetning"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Gateway"
-msgstr "Gátt"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Connection type: "
-msgstr "Tegund tengingar: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre og Miquelon"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Profile: "
-msgstr "Snið: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Internet connection configuration"
-msgstr "Internet uppsetning"
+msgid "saving Bootsplash theme..."
+msgstr "vista smellimynda-þema..."
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
+msgid "Portugal"
+msgstr "Portúgal"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
+msgid "Do you have another one?"
+msgstr "Er kannski eitt enn í vélinni?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "activate now"
-msgstr "virkja núna"
+msgid ", printing to %s"
+msgstr ", prenta á %s"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "deactivate now"
-msgstr "aftengja núna"
+msgid "Assign host name from DHCP address"
+msgstr "Skilgreina nafn vélar frá DHCP vistfangi"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "DHCP client"
-msgstr "DHCP biðlari"
+msgid "Toggle to normal mode"
+msgstr "Fara í venjulegan ham"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Started on boot"
-msgstr "Virkjað við ræsingu"
+msgid "Generic"
+msgstr "Almenn"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Boot Protocol"
-msgstr ""
+msgid "Cylinder %d to %d\n"
+msgstr "Sívalningur %d til %d\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "Adapter %s: %s"
-msgstr "Kort %s: %s"
+msgid "New profile..."
+msgstr "Nýtt snið..."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN Configuration"
-msgstr "Staðarnets-uppsetning"
+msgid "Which disk do you want to move it to?"
+msgstr "Hvaða disk viltu færa til?"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "LAN configuration"
-msgstr "Staðarnets-uppsetning"
+msgid "Display logo on Console"
+msgstr "Birta merki á stjórnskjá"
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
+msgid "Windows Domain"
+msgstr "Windows Lén"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Connect..."
-msgstr "Tengjast..."
+msgid "Interface %s (on network %s)"
+msgstr "Tengi %s (á neti %s)"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Disconnect..."
-msgstr "Aftengjast.."
+msgid "INFO"
+msgstr "Upplýsingar"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not connected"
-msgstr "Ótengdur"
+msgid "Wallis and Futuna"
+msgstr "Wallis og Futuna"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Connected"
-msgstr "Tengdur"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "Er Fpu til staðar"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Engir myndskannar fundust sem eru tiltækir fyrir kerfið þitt.\n"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
 msgstr ""
+"Engar aukalegar upplýsingar\n"
+"um þetta tæki, því miður."
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Interface:"
-msgstr "Tengi:"
+msgid "Build Single NIC -->"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Gateway:"
-msgstr "Gátt:"
+msgid "Is this correct?"
+msgstr "Er þetta rétt?"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Apply"
-msgstr "Virkja"
+msgid "Marshall Islands"
+msgstr "Marshall eyjar"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Root password"
+msgstr "Rótar-lykilorð"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Build All Kernels -->"
+msgstr "Byggja alla kjarna -->"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report unowned files."
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Wizard..."
-msgstr "Álfur..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Þú hefur ekkert diskminni\n"
+"\n"
+"Halda samt áfram?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Status:"
-msgstr "Staða:"
+msgid "Server IP missing!"
+msgstr "IP-vistfang miðlara vantar!"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Type:"
-msgstr "Tegund:"
+msgid "Suriname"
+msgstr "Súrinam"
 
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
 #, c-format
-msgid "Internet access"
-msgstr "Internet aðgengi"
+msgid "Enable ACPI"
+msgstr "Virkja ACPI"
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Hostname: "
-msgstr "Vélarnafn: "
+msgid "Graphical Environment"
+msgstr "Myndrænt umhverfi"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure Local Area Network..."
-msgstr "Stilla staðarnetstengingu..."
+msgid "Gibraltar"
+msgstr "Gíbraltar"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "State"
-msgstr "Staða"
+msgid "on Tape Device"
+msgstr "á segulband"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Driver"
-msgstr "Rekill"
+msgid "Do nothing"
+msgstr "Gera ekkert"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Protocol"
-msgstr "Samskiptaregla"
+msgid "Delete Client"
+msgstr "Eyða biðlara"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Interface"
-msgstr "Tengi"
+msgid "Filesystem type: "
+msgstr "Tegund skráakerfis:"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Configure Internet Access..."
-msgstr "Stilla Internet aðgengi..."
+msgid "Starting network..."
+msgstr "Ræsi net..."
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Wait please"
-msgstr "Augnablik"
+msgid "Vietnam"
+msgstr "Víetnam"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
+msgid "/_Fields description"
+msgstr "/_Lýsing svæða"
 
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "New profile..."
-msgstr "Nýtt snið..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Profile to delete:"
-msgstr "Snið sem á að eyða:"
+msgid "Help"
+msgstr "Hjálp"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Del profile..."
-msgstr "Eyða sniði..."
+msgid "Your personal phone number"
+msgstr "Þitt símanúmer"
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netstillingar (%d tengi)"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Hvaða stærð viltu skilja eftir fyrir Windows á"
 
-#: ../../standalone/drakedm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
 msgstr ""
 
-#: ../../standalone/drakedm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Username required"
+msgstr "Notandanafns er þörf"
 
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Unable to fork: %s"
-msgstr "Get ekki kvíslað: %s"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB/Windows 9x/NT prentviðföng"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
 msgstr ""
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Be sure a media is present for the device %s"
+msgid "mkinitrd optional arguments"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Build the disk"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Output"
-msgstr "Úttak"
-
-# ## skrytid
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Remove a module"
-msgstr "Fjarlægja einingu"
+msgid "Protocol for the rest of the world"
+msgstr "Samskiptaregla til tengingar við umheiminn"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Add a module"
-msgstr "Bæta við einingu"
+msgid "Print test pages"
+msgstr "Prenta út prufublaðsíðu(r)"
 
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "omit scsi modules"
-msgstr "sleppa scsi einingum"
+msgid "64 MB or more"
+msgstr "64 MB eða meira"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "if needed"
-msgstr "ef þörf"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "omit raid modules"
-msgstr "sleppa raid einingum"
+msgid "Please select the device where your %s is attached"
+msgstr "Vinsamlega veldu gátt þar sem %s er tengdur"
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "force"
-msgstr "Þvinga"
+msgid "Not formatted\n"
+msgstr "Ekki forsniðinn\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "mkinitrd optional arguments"
+msgid "Periodic Checks"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Expert Area"
-msgstr "F. snillinga"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "kernel version"
-msgstr "kjarna útgáfa"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "Uppsetning"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "default"
-msgstr "sjálfgefið"
+msgid "Backup the system files before:"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "General"
-msgstr "Almennt"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Þetta er hið hefðbundna öryggi sem mælt er með fyrir tölvu sem verður notuð\n"
+"til að tengja við netið sem biðill."
 
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
 #, c-format
-msgid "boot disk creation"
-msgstr "búa til ræsidisk"
+msgid "First floppy drive"
+msgstr "Fyrsta drif"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "/File/_Quit"
+msgstr "/Skrá/_Hætta"
 
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Size"
-msgstr "Stærð"
+msgid "Dvorak"
+msgstr "Dvorak"
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Module name"
-msgstr "Kjarnaeining"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Hætta innsetningu"
+msgid "Choose the new size"
+msgstr "Veldu nýja stærð"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Remove fonts on your system"
+msgid "Media class"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Initial tests"
-msgstr ""
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "%s er óþekkt af þessarrí útgáfu af ScannerDrake"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Post Install"
-msgstr "Eftir innsetningu"
+msgid "Faroe Islands"
+msgstr "Færeyjar"
 
 #: ../../standalone/drakfont:1
 #, c-format
-msgid "Install & convert Fonts"
+msgid "Restart XFS"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Copy fonts on your system"
-msgstr ""
+msgid "Add host/network"
+msgstr "Bæta við vél/neti"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Remove List"
-msgstr "Fjarlægja lista"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Selected All"
-msgstr "Allt valið"
+msgid "Please enter the directory to save to:"
+msgstr "Gefðu upp möppu til vistunar:"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Model name"
+msgstr "Tegundarnafn"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "here if no."
-msgstr ""
+msgid "Albania"
+msgstr "Albanía"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "click here if you are sure."
+msgid "No CDR/DVDR in drive!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Install List"
-msgstr "Setja inn lista"
+msgid "British Indian Ocean Territory"
+msgstr "Bresku indíueyjar"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
+msgid "Normal Mode"
+msgstr "Venjulegur hamur"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
 "\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Generic Printers"
-msgstr "Almennir prentarar"
+msgid "Printer connection type"
+msgstr "Tegund prenttengingar"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Ekkert nettengi á vélinni þinni!"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Net %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Veldu þau forrit sem eiga að styðja við letrin:"
+msgid "Option %s out of range!"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
+msgid "Connect %s"
+msgstr "Tengist %s"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Restarting CUPS..."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "About"
-msgstr "Um forrit"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Prenta/skanna/Mynd á \"%s\""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Font List"
-msgstr "Leturlisti"
+msgid "Duplicate mount point %s"
+msgstr "%s tengipunktur er nú þegar til"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Advanced Options"
-msgstr "Ítarlegri Valkostir"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Uninstall Fonts"
-msgstr "Fjarlægji letur"
+msgid "Connection Configuration"
+msgstr "Tengi-stillingar"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Get Windows Fonts"
-msgstr ""
+msgid "Unknown|Generic"
+msgstr "Óþekkt|almennt"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
 #, c-format
-msgid "Import Fonts"
-msgstr "Flytja inn letur"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "done"
-msgstr "lokið"
+msgid "Quit"
+msgstr "Hætta"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "xfs restart"
-msgstr "enduræsi xfs"
+msgid "Myanmar"
+msgstr "Myanmar"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Ráðstafa skjálfkrafa"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Restart XFS"
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "Athuga skemmdar blokkir?"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Other MultiMedia devices"
+msgstr "Önnur margmiðlunartæki"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "No remote machines"
+msgstr "Engar fjarlægar vélar"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "pfm fonts conversion"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "ttf fonts conversion"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "Auðkenning NIS"
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "Ghostscript referencing"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
 msgstr ""
+"Valkosturinn ``Takmarka alla rofa á skipanalínu'' gerir ekkert án lykilorðs"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Fonts conversion"
+msgid "Internet Connection Sharing currently enabled"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Card IO_0"
+msgstr "Kort IO_0"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "Sameinuðu Arabísku Furstadæmin"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "True Type fonts installation"
-msgstr "Innsetning True Type leturs"
+msgid "Card IO_1"
+msgstr "Kort IO_1"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Fonts copy"
-msgstr "Afrita letur"
+msgid "Thailand"
+msgstr "Taíland"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Routers:"
+msgstr "Beinar:"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "Kasakstan"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Reselect correct fonts"
+msgid "Display all available remote CUPS printers"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux innsetning %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "no fonts found"
-msgstr "Engin letur fundust"
+msgid "Thai keyboard"
+msgstr "Tælenskt lyklaborð"
 
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "parse all fonts"
-msgstr ""
+msgid "Dialup options"
+msgstr "Innhringistillingar"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Bouvet Island"
+msgstr "Bouvet eyja"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Search installed fonts"
+msgid "If no port is given, 631 will be taken as default."
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
 msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
 "\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Veldu prenttengingu"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Veldu prenttengingu"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish"
+msgstr "Pólskt"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Veldu prenttengingu"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Mandrake Online"
+msgstr "Mandrake beint"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The setup has already been done, and it's currently enabled."
+msgid "\t-Network by webdav.\n"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "The setup has already been done, but it's currently disabled."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
 msgstr ""
 
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
+msgid "Netmask"
+msgstr "Netsía"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Problems installing package %s"
-msgstr "Vandræði við að setja inn pakka %s"
+msgid "No hard drives found"
+msgstr "Engir harðir diskar fundust"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Configuring..."
-msgstr "Uppsetning..."
+msgid "2 buttons"
+msgstr "2 hnappar"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "Hvaða gerðar er ISDN tengingin þín?"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "Label"
+msgstr "Nafn"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Vista á diskling"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Printer auto-detection"
+msgstr "Finna prentara sjálfkrafa"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "Which of the following is your ISDN card?"
+msgstr "Hvert af eftirfarandi er þitt ISDN kort?"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, c-format
-msgid "The DHCP end range"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
 msgstr ""
+"NFS er vinsæl aðferð til skráarmiðlunar yfir TCP/IP net.\n"
+"Þessi þjónusta veitir NFS skráamiðlun, sem er stillt í\n"
+"/etc/exports skránni."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "Msec"
+msgstr "Msek"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "The internal domain name"
-msgstr "Nafn staðbundins léns"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "The DNS Server IP"
-msgstr "Vistfang DNS þjóns"
+msgid "Number of capture buffers:"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Vistfang (þessa) DHCP miðlara"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Þitt val? (0/1, sjálfgefið %s') "
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
 "\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Local Network adress"
-msgstr "Staðbundið IP-vistfang"
+msgid "French"
+msgstr "Franskt"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "Tékkneskt (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Vélbúnaðarskönnun í gangi"
 
 #: ../../standalone/drakgw:1
 #, c-format
+msgid "Net Device"
+msgstr "Nettæki"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Yfirlit"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
+" (hliðtengd port: /dev/lp0, /dev/lp1, ..., samsvarar LPT1:, LPT2:, ..., 1. "
+"USB prentari: /dev/usb/lp0, 2.USB prentari: /dev/usb/lp1, ...)."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Current interface configuration"
-msgstr "Núverandi uppsetningar tengis"
+msgid "Next"
+msgstr "Næsta"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Show current interface configuration"
-msgstr "Sýna núverandi uppsetningar tengis"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Þú getur ekki sett ræsistjórann á %s disksneiðina\n"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "No (experts only)"
-msgstr "Nei (aðeins f. sérfræðinga)"
+msgid "CHAP"
+msgstr "CHAP"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Automatic reconfiguration"
-msgstr "Sjálfvirk enduruppsetning"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
 "\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
 "\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface already configured"
-msgstr "Nettenging þegar uppsett"
+msgid "Puerto Rico"
+msgstr "Puerto Ríko"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
 msgstr ""
+"pakkinn 'ImageMagick' verður að vera uppsettur til að ljúka uppsetningunni.\n"
+"smelltu á \"Í lagi\" til að setja inn 'ImageMagick' eða 'Hætta' til að "
+"stöðva."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litháenískt \"töluröð\" QWERTY"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
-"%s\n"
 "\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface"
-msgstr "Nettengi"
+msgid "Anguilla"
+msgstr "Anguilla"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS lén"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
 msgstr ""
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "Ekkert nettengi á vélinni þinni!"
+msgid "Antarctica"
+msgstr "Suðurskautslandið"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Interface %s"
-msgstr "Tengi %s"
+msgid "Mount options"
+msgstr "Tengistillingar"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Tengi %s (nota einingu %s)"
+msgid "Jamaica"
+msgstr "Jamaíka"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, c-format
-msgid "Net Device"
-msgstr "Nettæki"
+msgid ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Please wait, preparing installation..."
+msgstr "Augnablik, undirbý innsetningu..."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTZ)"
+msgstr "Tékkneskt (QWERTZ)"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Track network card id (useful for laptops)"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Internet Connection Sharing"
-msgstr "Samnýting Internets tengingar"
+msgid "The port number should be an integer!"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Samnýting Internetstengingar er nú virk."
+msgid "You must choose an image file first!"
+msgstr "Þú verður að velja mynd fyrst!"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Enabling servers..."
-msgstr "Virkja miðlara..."
+msgid "Restore from Hard Disk."
+msgstr "Endurheimta frá hörðum disk"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "dismiss"
-msgstr "hætta við"
+msgid "Add to LVM"
+msgstr "Bæta við LVM"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "reconfigure"
-msgstr "endurstilla"
+msgid "DNS server"
+msgstr "Nafnamiðlari"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "enable"
-msgstr "virkja"
+msgid "Trinidad and Tobago"
+msgstr "Trínidad og Tóbagó"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+msgid "LPD and LPRng do not support IPP printers.\n"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
+msgid "simple"
+msgstr "einfalt"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Samnýting Internets tengingar er nú aftengd"
+msgid "Clear all"
+msgstr "Hreinsa allt"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Disabling servers..."
-msgstr "Aftengi miðlara..."
+msgid "No test pages"
+msgstr "Engar prufusíður"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "disable"
-msgstr "aftengja"
+msgid "Adapter %s: %s"
+msgstr "Kort %s: %s"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandseyjar (Malvinas)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Óþekkt tegund"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Auðkenning"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Internet Connection Sharing currently enabled"
+msgid "Backup Now"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "/_File"
+msgstr "/_Skrá"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../standalone/drakhelp:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Path"
-msgstr "Slóð"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamílskt (ISCII uppsetning)"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "group :"
-msgstr "hópur :"
+msgid "Mayotte"
+msgstr "Mayotte"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "user :"
-msgstr "Notand i:"
+msgid "Creating auto install floppy..."
+msgstr "Bý til diskling fyrir sjálfvirka uppsetningu..."
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Path selection"
-msgstr "Val á slóð"
+msgid "Searching for scanners ..."
+msgstr "Leita að myndlesara..."
 
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
+msgid "Partitioning"
+msgstr "Disksneiðing"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use group id for execution"
-msgstr ""
+msgid "Russia"
+msgstr "Rússland"
 
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Use owner id for execution"
+msgid "ethernet card(s) detected"
+msgstr "netkort fundin"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Syslog"
+msgstr "Kerfisannáll"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Can't create catalog!"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
 msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Not enough free space for auto-allocating"
+msgstr "Ekki nægilegt pláss til sjálfvirkrar úthlutunar"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Set root password"
+msgstr "Ákveða rótarlykilorð"
 
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "sticky-bit"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
 msgstr ""
+"Það er enginn \"frjáls\" rekill fyrir hljóðkortið þitt (%s) en það er til "
+"rekill framleiðanda á \"%s\"."
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Property"
-msgstr "Eiginleiki"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Eftir stærðarbreytingu á sneið %s, hafa öll gögn á þessari disksneið tapast"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Permissions"
-msgstr "Aðgangsheimildir"
+msgid "Internet connection configuration"
+msgstr "Internet uppsetning"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Current user"
-msgstr "Núverandi notandi"
+msgid "Scanning for TV channels"
+msgstr "Leita að sjónvarpsrásum"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "browse"
-msgstr ""
+msgid "Kernel:"
+msgstr "Kjarni:"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit current rule"
-msgstr ""
+msgid "/_About..."
+msgstr "/_Um..."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "edit"
-msgstr "sýsl"
+msgid "Bengali"
+msgstr "Bengalskt"
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Delete selected rule"
-msgstr "Eyða valinni reglu"
+msgid "Preference: "
+msgstr "Valkostur:"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "delete"
-msgstr "eyða"
+msgid "Wizard..."
+msgstr "Álfur..."
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "Add a new rule at the end"
-msgstr "Bæta við reglu aftast"
+msgid "Services: %d activated for %d registered"
+msgstr "Þjónustur: %d ræstar af %d skráðum"
 
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
 #, c-format
-msgid "add a rule"
-msgstr "Bæta við reglu"
+msgid "Create a bootdisk"
+msgstr "Búa til ræsidiskling"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Move selected rule down one level"
-msgstr "Færa valda reglu niður um eitt þrep"
+msgid "Solomon Islands"
+msgstr "Salómon eyjar"
 
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Down"
-msgstr "Niður"
+msgid "(module %s)"
+msgstr "(eining %s)"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Move selected rule up one level"
-msgstr "Færa valda reglu upp um eitt þrep"
+msgid "Workgroup"
+msgstr "Vinnuhópur"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Up"
-msgstr "Upp"
+msgid "Printer host name or IP"
+msgstr "Nafn á prentara-vél eða IP"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "select perm file to see/edit"
+msgid "Host Path or Module"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Name of printer should contain only letters, numbers and the underscore"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "permissions"
-msgstr "heimildir"
+msgid "Show current interface configuration"
+msgstr "Sýna núverandi uppsetningar tengis"
 
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
 #, c-format
-msgid "group"
-msgstr "hópur"
+msgid "Development"
+msgstr "Forritunartól"
 
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "user"
-msgstr "notandi"
+msgid "Done"
+msgstr "Búið"
 
-#: ../../standalone/drakperm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "path"
-msgstr "slóð"
+msgid "Web Server"
+msgstr "Vefmiðlari"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Staðsetning auto_install.cfg skrár"
+msgid "\tDo not include System Files\n"
+msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Chile"
+msgstr "Chíle"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, c-format
-msgid "No image found"
-msgstr "fann engan ræsikjarna"
-
-#: ../../standalone/drakpxe:1
-#, c-format
-msgid "Installation image directory"
-msgstr "Uppsetningarmappa kjarna"
-
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
 "\n"
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
 #, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(%s er nú þegar til)"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "The DHCP start ip"
-msgstr ""
+msgid ", using command %s"
+msgstr " nota skipun %s"
 
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt og Shift lyklar samtímis"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Tengi %s (á neti %s)"
+msgid "Flags"
+msgstr "Flögg"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Vinsamlega veldu hvaða nettengi verða notuð fyrir dhcp miðlarann"
+msgid "Add/Del Users"
+msgstr "Bæta við/eyða notanda"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Host/network IP address missing."
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please wait, setting security options..."
-msgstr "Augnablik stilli öryggisvalkosti..."
+msgid "weekly"
+msgstr "vikulega"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Please wait, setting security level..."
-msgstr "Augnablik, stilli öryggisþrep..."
+msgid "Settings"
+msgstr "Stillingar"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
 msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
 #, c-format
-msgid "System Options"
-msgstr "Kerfisvalkostir"
+msgid "Here is the full list of available countries"
+msgstr "Hér er listi af mögulegum löndum"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Network Options"
-msgstr "Netvalkostir"
+msgid "Alternative test page (A4)"
+msgstr "Önnur prufublaðsíða (A4)"
 
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
-"Eftirfarandi aðgerðir er hægt að stilla til að sérsníða\n"
-"öryggiskerfi þitt.. Ef þú þarfnast aðstoðar, líttu á vísbendingarnar.\n"
+"Ef þú hefur alla geisladiskana í listanum hér að neðan smelltu þá á 'Í "
+"lagi'\n"
+"Ef þú hefur engan þessara geisladiska smelltu þá á 'Hætta'\n"
+"Ef einhverja diska vantar, afveldu þá og smelltu síðan á 'Í lagi'"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Security Administrator:"
-msgstr "Öryggisfulltrúi:"
+msgid "Wait please"
+msgstr "Augnablik"
 
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Security Alerts:"
-msgstr "Öryggisviðvaranir:"
+msgid "PAP"
+msgstr "PAP"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Security Level:"
-msgstr "Öryggisþrep:"
+msgid "Backup user files"
+msgstr "Afrita skrár notanda"
 
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "(default value: %s)"
-msgstr "(sjálfgefið gildi: %s)"
+msgid "New"
+msgstr "Ný"
 
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
 "\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
 msgstr ""
-"\n"
-"\n"
-"\n"
-"Athugið ef þú hefur ISA PnP hljóðkort þá verður þú að nota sndconfig "
-"forritið.. Sláðu bara inn skipunina \"sndconfig\" á stjórnskjá."
 
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
 msgstr ""
-"Ekkert hljóðkort hefur fundist á tölvunni þinni. Vinssamlega athugaðu hvort "
-"hljóðkort sem stutt er af Linux sé rétt sett upp. \n"
-"\n"
-"Þú getur leitað í vélbúnaðargagnagrunni á:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No Sound Card detected!"
-msgstr "Ekkert hljóðkort fannst!"
+msgid "Load from floppy"
+msgstr "Hlaða frá diskling"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s Smellimerki (%s) forsýn"
+msgid "The following printer was auto-detected. "
+msgstr "Eftirfarandi prentari fannst. "
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Generating preview ..."
-msgstr "Bý til forsýn..."
+msgid "Boot Floppy"
+msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You must choose an image file first!"
-msgstr "Þú verður að velja mynd fyrst!"
+msgid "Norwegian"
+msgstr "Norskt"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "ProgressBar color selection"
-msgstr "Litaval framvindusúlu"
+msgid "Searching for new scanners ..."
+msgstr "Leita að nýjum myndskönnum ..."
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Þemað hefur ekki enn smellimynd í %s !"
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web miðlari"
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "vista smellimynda-þema..."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Stig örgjörvans (undirtegundar (útgáfu) númer)"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "choose image file"
-msgstr "Veldu myndskrá"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "Veldu aðgerð"
+msgid "select path to restore (instead of /)"
+msgstr ""
 
 #: ../../standalone/draksplash:1
 #, c-format
 msgid "Configure bootsplash picture"
 msgstr "Stilla upphafs-smellimynd"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Skilaboð frá kjarna eru sjálfgefið ekki sýnileg"
+msgid "China"
+msgstr "Kína"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Display logo on Console"
-msgstr "Birta merki á stjórnskjá"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+" (vertu viss um að allir þínir prentarar séu tengdir og kveikt á þeim).\n"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose color"
-msgstr "Veldu lit"
+msgid "Georgia"
+msgstr "Georgía"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
 #, c-format
-msgid "Save theme"
-msgstr "Vista þema"
+msgid "Reading data of installed printers..."
+msgstr "Les gögn um uppsetta prentara..."
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Preview"
-msgstr "Forsýn"
+msgid " Erase Now "
+msgstr " Eyða núna "
 
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "the color of the progress bar"
-msgstr "litur framvindusúlu"
+msgid "server"
+msgstr "netþjónn"
 
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "the height of the progress bar"
-msgstr "hæð framvindusúlu"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Settu tóman FAT forsniðinn diskling í drif %s"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "the width of the progress bar"
-msgstr "breidd framvindusúlu"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "já þýðir að örgjörvinn hefur fleytitöluörgjörva"
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"y hnit framvindusúlu\n"
-"á efra vinstra horni"
+msgid "Please Wait... Applying the configuration"
+msgstr "Augnablik... Framkvæmi stillingar"
 
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"x hnit framvindusúlu\n"
-"á efra vinstra horni"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Velkomin að GRUB kerfisvalinu!"
 
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "text box height"
-msgstr "hæð textaglugga"
+msgid "Grub"
+msgstr "Grub"
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "text width"
-msgstr "Textabreidd"
+msgid "SCSI controllers"
+msgstr "SCSI stýringar"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"y hnit textaglugga\n"
-"í fjölda stafa"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " á LPD þjóni \"%s\", prentari \"%s\""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
 #, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Choosing a display manager"
 msgstr ""
-"x hnit textaglugga\n"
-"í fjölda stafa"
 
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Browse"
-msgstr "Flakka"
+msgid "Zeroconf Host name"
+msgstr "Zeroconf Heiti vélar"
 
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Theme name"
-msgstr "Þema nafn"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP vistfang á að vera á sniðinu 1.2.3.4"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "final resolution"
-msgstr "endanleg upplausn"
+msgid "Ecuador"
+msgstr "Ekvador"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "first step creation"
-msgstr "fyrsta skref"
+msgid "Add an item"
+msgstr "Bæta við hlut"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "The printers on this machine are available to other computers"
 msgstr ""
-"pakkinn 'ImageMagick' verður að vera uppsettur til að ljúka uppsetningunni.\n"
-"smelltu á \"Í lagi\" til að setja inn 'ImageMagick' eða 'Hætta' til að "
-"stöðva."
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "I can't find needed image file `%s'."
 msgstr ""
-"Ekkert sjónvrpskort hefur fundist á vélinni þinni.  Vinsamlega athugið hvort "
-"sjónvarpskort sem stutt er af Linux sé rétt tengt og uppsett.\n"
-"\n"
-"\n"
-"Þú getur leitað í vélbúnaðargagnagrunni á:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Ekkert sjónvarpskort fannst!"
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nú getur þú keyrt xawtv (undir X!) !\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"Ekkert hljóðkort fannst reyndu að keyra \"harddrake\" eftir uppsetningu"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Have a nice day!"
-msgstr "Njóttu dagsins!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"Ógild gátt gefin: %s.\n"
+"Rétt form er \"gátt/tcp\" eða \"gátt/udp\". \n"
+"þar sem gátt er á bilinu 1 til 65535"
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV er ekki sett upp!"
+msgid "Shell"
+msgstr "Skel"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Það kom upp villa við leit að sjónvarpsrásum"
+msgid "PCI"
+msgstr "PCI"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Scanning for TV channels"
-msgstr "Leita að sjónvarpsrásum"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome og Prinsípe"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Leit að sjónvarpsrásum í gangi..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "Get ekki tengst sem notandi %s (vitlaust lykilorð?)"
 
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Area:"
-msgstr "Svæði:"
+msgid "Azerbaidjani (latin)"
+msgstr "Adzerbadjanskt (latneskt)"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "TV norm:"
-msgstr "Sjónvarpsstaðall:"
+msgid "Package not installed"
+msgstr "Pakki ekki settur inn"
 
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Vinsamleg,\n"
-"gefðu upp sjónvarpstaðal og land"
+msgid "Become a MandrakeExpert"
+msgstr "Gerstu Mandrake snillingur"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Australian Optus cable TV"
-msgstr "Ástralska Optus kapal TV"
+msgid "American Samoa"
+msgstr "Ameríku Samóeyjar"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Newzealand"
-msgstr "Nýja sjáland"
+msgid "Protocol"
+msgstr "Samskiptaregla"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "France [SECAM]"
-msgstr "Frakkland [SECAM]"
+msgid "Copy fonts on your system"
+msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "East Europe"
-msgstr "Austur Evrópa"
+msgid "Harddrake help"
+msgstr "Harddrake hjálp"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "West Europe"
-msgstr "Vestur Evrópa"
+msgid "Bogomips"
+msgstr "Bogomips"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "China (broadcast)"
-msgstr "Kína (loftnet)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Uppsetning Mandrake skjámiðlara"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kapal)"
+msgid ""
+"\n"
+"                    DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (loftnet)"
+msgid "Restore all backups"
+msgstr "Endurheimta öll afrit"
 
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kapal)"
+msgid "if set to yes, check open ports."
+msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (kapal-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "USA (cable)"
-msgstr "USA (kapal)"
+msgid "You can't select/unselect this package"
+msgstr "Þú getur ekki vali/afvalið þennan pakka"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "USA (broadcast)"
-msgstr "USA (loftnet)"
+msgid "Warning"
+msgstr "Aðvörun"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
-"\n"
 "\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "primary"
-msgstr "aðal"
+msgid "Remote host name"
+msgstr "Vélarnafn þjóns"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "secondary"
-msgstr "auka"
+msgid "deactivate now"
+msgstr "aftengja núna"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Smelltu á tæki í vinstri glugganum til að birta upplýsingar hér"
+msgid "access to X programs"
+msgstr "aðgengi að X forritum"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Unknown"
-msgstr "Óþekkt"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "Búa til nýja disksneið"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "unknown"
-msgstr "óþekkt"
+msgid "Italy"
+msgstr "Ítalía"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Running \"%s\" ..."
-msgstr "Keyri \"%s\"..."
+msgid "Name of printer"
+msgstr "Nafn prentara"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Run config tool"
-msgstr "keyra stillieiningu"
+msgid "disable"
+msgstr "aftengja"
 
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "Configure module"
-msgstr "Stilla einingu"
+msgid "error unmounting %s: %s"
+msgstr "villa við að aftengja %s: %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Information"
-msgstr "Upplýsingar"
+msgid "Do it!"
+msgstr "Áfram!"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Detected hardware"
-msgstr "fundinn vélbúnaður"
+msgid "Cayman Islands"
+msgstr "Keyman eyjar"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 útgáfa "
+msgid "%s not responding"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Detection in progress"
-msgstr "Leitun í gangi"
+msgid "Select model manually"
+msgstr "Velja tegund handvirkt"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Author:"
-msgstr "Höfundur:"
+msgid "Format"
+msgstr "Forsníða"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
 #, c-format
 msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
 msgstr ""
-"Þetta er HardDrake, vélbúnaðarstillitól Mandrake.\n"
-"Útgáfa:"
+"Algengast er að tengjast við ADSL með pppoe\n"
+"sumir nota pptp (Ísland), nokkrir nota dhcp.\n"
+"Ef þú veist ekki, veldu þá 'nota pptp' (Ísland)"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "About Harddrake"
-msgstr "Um Harddrake"
+msgid "Various"
+msgstr "Ýmislegt"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "/_About..."
-msgstr "/_Um..."
+msgid "Zip"
+msgstr "Zip"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/_Report Bug"
-msgstr "/_Senda villutilkynningu"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
 msgstr ""
-"Þegar þú hefur valið tæki, sérð þú upplýsingar um tækið í svæðunum í "
-"gluggnum hægra megin (\"Upplýsingar\")"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Select a device !"
-msgstr "Veldu tæki !"
+msgid "PDQ"
+msgstr "PDQ"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albanskt"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Litháen"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Samþjappað"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr "Fann tegund: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
 #, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
 msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
 "\n"
 msgstr ""
-"Lýsing á svæðum:\n"
-"\n"
+"Þetta er HardDrake, vélbúnaðarstillitól Mandrake.\n"
+"Útgáfa:"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Harddrake help"
-msgstr "Harddrake hjálp"
+msgid "Local files"
+msgstr "Staðbundnar skrár"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "/_Fields description"
-msgstr "/_Lýsing svæða"
+msgid "maybe"
+msgstr "kannski"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "/_Help"
-msgstr "/_Hjálp"
+msgid "Panama"
+msgstr "Panama"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "/_Quit"
-msgstr "/_Hætta"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Finna _jazz drif sjálfkrafa"
+msgid "Monitor"
+msgstr "Skjár"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/Autodetect _modems"
-msgstr "/Finna _motöld sjálfkrafa"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "/Autodetect _printers"
-msgstr "/Finna _prentara sjálfkrafa"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 þúsund litir (16 bits)"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "/_Options"
-msgstr "/_Valkostir"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "the vendor name of the processor"
-msgstr "örgjörvanafn framleiðanda"
+msgid "Size: %d KB\n"
+msgstr "Stærð: %d KB\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "the vendor name of the device"
-msgstr "tækisnafn framleiðanda"
+msgid "Remove fonts on your system"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Við hvaða braut er músin þín tengd?"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Stig örgjörvans (undirtegundar (útgáfu) númer)"
+msgid "Graphical interface at startup"
+msgstr "Grafískt viðmót í ræsingu"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Model stepping"
-msgstr "tegundar-stig"
+msgid "Please enter the directory to save:"
+msgstr "Gefðu upp möppu til vistunar:"
 
 #: ../../standalone/harddrake2:1
-#, c-format
-msgid "the number of the processor"
-msgstr "númer örgjörvans"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Forsnið sem eru studd af disklingadrifinu"
 
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
 #, c-format
-msgid "Processor ID"
-msgstr "ID örgjörva"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ekki nógu margar disksneiðar fyrir RAID %d\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "network printer port"
-msgstr "netgátt prentara"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "the name of the CPU"
-msgstr "nafn örgjörvans"
+msgid "Connected"
+msgstr "Tengdur"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Name"
-msgstr "Nafn"
+msgid "USB printer \\#%s"
+msgstr "USB prentari \\#%s"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "the number of buttons the mouse has"
-msgstr "fjöldi hnappa sem músin hefur"
+msgid "Macedonian"
+msgstr "Makedónískt"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Number of buttons"
-msgstr "Fjöldi hnappa"
+msgid "Bridges and system controllers"
+msgstr "Brýr og kerfisstýringar"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Uppgefið örgjörvanafn framleiðanda"
+msgid "/File/_Save"
+msgstr "/Skrá/_Vista"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Model name"
-msgstr "Tegundarnafn"
+msgid "Mali"
+msgstr "Malí"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Ætt örgjörva (þ.e. 8 fyrir PentiumIII,...)"
+msgid "No details"
+msgstr "Engar upplýsingar"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Model"
-msgstr "Tegund"
+msgid "very nice"
+msgstr "mjög þægilegt"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "hard disk model"
-msgstr "tegund harðs disks"
+msgid "Preview"
+msgstr "Forsýn"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "class of hardware device"
-msgstr "flokkur vélbúnaðar"
+msgid "Remote Control"
+msgstr "Fjarstýring"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Media class"
+msgid "Please select media for backup..."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Sub generation of the cpu"
-msgstr "Undir-flokkur örgjörva"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 miðlari: %s\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Level"
-msgstr "Stig"
+msgid "Allow Thin Clients"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Forsnið sem eru studd af disklingadrifinu"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgískt (\"Rússneskt\")"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Floppy format"
-msgstr "Forsnið disklings"
+msgid "/_Options"
+msgstr "/_Valkostir"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Your printer model"
+msgstr "Þín tegund prentara"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
 msgstr ""
-"Sumir eldri i486DX örgjörvar gátu ekki snúið eðlilega til baka eftir að "
-"\"halt\" skipunin var framkvæmd"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Halt bug"
-msgstr "Halt villa"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
 msgstr ""
-"Eldri pentium örgjörvar voru gallaðir og frusu þegar þeir þýddu F00F "
-"aðgerðina"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Sel stillingar"
+
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "F00f bug"
-msgstr "F00f villa"
+msgid "Save"
+msgstr "Vista"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "já þýðir að fleytitöluörgjörvinn hefur tengt sig sérstöku ígripi"
+msgid "The %s is unsupported"
+msgstr "Enginn stuðningur við %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Hvort fleytitölu-örgjörvinn hefur sérstakt ígrip"
+msgid "Load the drivers for your usb devices."
+msgstr "Hlaða inn reklum fyrir USB tæki."
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "já þýðir að örgjörvinn hefur fleytitöluörgjörva"
+msgid "Disk"
+msgstr "Diskur"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Is FPU present"
-msgstr "Er Fpu til staðar"
+msgid "Enter a printer device URI"
+msgstr "Gefðu upp slóð að prentara (URI)"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
 msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
-"Eldri Pentium örgjörvar voru með villu í fleytitölu-örgjörva sem olli "
-"ónákvæmni í útreikningum þegar fleytitöludeiling var framkvæmd (FDIV)"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv villa"
+msgid "Israel"
+msgstr "Ísrael"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Örgjörvaflögg eins og þau eru gefin upp af kjarna"
+msgid "French Guiana"
+msgstr "Franska Gínea"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Flags"
-msgstr "Flögg"
+msgid "default:LTR"
+msgstr "default:LTR"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "eining GNU/LInux kjarnans sem meðhöndlar tækið"
+msgid "add a rule"
+msgstr "Bæta við reglu"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Module"
-msgstr "Eining"
+msgid "A command line must be entered!"
+msgstr "Skipanalína verður að vera!"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "nýtt breytilegt tækisnafn útgefið af kjarna devfs"
+msgid "Select user manually"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New devfs device"
-msgstr "Nýtt devfs tæki"
+msgid "Transfer printer configuration"
+msgstr "Flytja prentarastillingar"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "old static device name used in dev package"
-msgstr "eldri föst tækisnöfn sem eru notuð í dev pakkanum"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Viltu virkja prentun á ofangreindum prenturum?\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Old device file"
-msgstr "Eldri tækisskrá"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "This field describes the device"
-msgstr "Þetta svæði lýsir tækinu"
+msgid "%s (Port %s)"
+msgstr "%s (Gátt %s)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "Nota nettengingu til afritunar"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
-"Tíðni örgjörva í MHz (Megarið sem er fyrsta nálgun á fjölda aðgerða sem "
-"örgjörvinn getur framkvæmt á sekúndu)"
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "Frequency (MHz)"
-msgstr "Tíðni (Mhz)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "Accept user"
+msgstr "Samþykkja notanda"
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Cpuid level"
-msgstr "Örgjörvaþrep"
+msgid "Server"
+msgstr "Þjónn"
 
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Fjölskylda örgjörva (þ.e. 6 fyrir i686)"
+msgid "Bad choice, try again\n"
+msgstr "Rangt val, reyndu aftur\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Cpuid family"
-msgstr "Fjölskylduauðkenni örgjörva"
+msgid "Heard and McDonald Islands"
+msgstr "Heard og McDonald eyjar"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Hvort þessi örgjörvi er haldinn Cyrix 6x86 Coma villunni"
+msgid "No alternative driver"
+msgstr "Enginn aukarekill"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Coma bug"
-msgstr "Coma villa"
+msgid "Toggle to expert mode"
+msgstr "Færa í snillingsham"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "sérstakir eiginleikar rekilsins (brennari og/eða DVD stuðningur)"
+msgid "(on this machine)"
+msgstr "(á þessarri vél)"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Drive capacity"
-msgstr "Diskstærð"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Vistfang Gáttar á að vera á sniðinu 1.2.3.4"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Stærð á (annars þreps) skyndiminni örgjörva"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Cache size"
-msgstr "Stærð skyndiminnis"
+msgid "Looking at packages already installed..."
+msgstr "Leita að þegar uppsettum pökkum"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
 msgstr ""
-"- pci tæki: hér er skráð PCI rauf, tæki og tegund þessa spjalds\n"
-"- eide tæki: tækið er annað hvort herra eða þræll (master/slave)\n"
-"- scsi tæki: scsi braut og scsi device númer"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Location on the bus"
-msgstr "Staðsetning á braut"
+msgid "Driver"
+msgstr "Rekill"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Bus identification"
-msgstr "Brautar auðkenning"
+msgid "Printer on remote lpd server"
+msgstr "Prentari fjartengdur á lpd þjóni"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI rás"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Channel"
-msgstr "Rás"
+msgid "No mouse"
+msgstr "Engin mús"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "Þetta er vélbúnaðarbrautin sem tækið er tengt á (þ.e. PCI USB,...)"
+msgid "Germany"
+msgstr "Þýskaland"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Bus"
-msgstr "Braut"
+msgid "Austria"
+msgstr "Austurríki"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "listi af aukareklum fyrir þetta hljóðkort"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Keyrðu \"sndconfig\" eftir uppsetningu til að stilla hljóðkortið þitt"
 
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Alternative drivers"
-msgstr "Aukareklar"
+msgid "Collapse Tree"
+msgstr "Loka tré"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Viltu að Backspace lykilinn skili Delete í skjáham?"
+msgid "Auto Install Configurator"
+msgstr "Uppsetning sjáfvirkrar innsetningar"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Hvaða lyklaborðsuppsetningu viltu?"
+msgid "Configure networking"
+msgstr "Stilla nettengingu"
 
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Get ekki ræst uppfærslu yfir net!!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "Hvert viltu setja ræsistjórann?"
 
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
 msgstr ""
-"Vinsamlega settu uppsetningar-geisladiskinn í geisladrifið og ýttu á 'Í "
-"lagi' þegar þú \n"
-"ert búinn. Ef þú hefur hann ekki ýttu þá á 'Hætta við' til að forðast "
-"uppfærslu yfir net."
 
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Change Cd-Rom"
-msgstr "Breyta geisladrifi"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Það er ekki stuðningur fyrir %s í þessari útgáfu af Mandrake Linux"
 
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Breytingar hafa verið gerðar, en til að virkja þær þá verður þú að stimpla "
-"þig út"
+msgid "DHCP client"
+msgstr "DHCP biðlari"
 
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Save as.."
-msgstr "Vista sem..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Villa við lestur úr skránni %s: %s"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Please enter your email address below "
-msgstr "Vinsamlega gefðu upp netfang þitt "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech mús (raðtengd, gömul C7 tegund)"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "alert configuration"
-msgstr "Uppsetning viðvaranna"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Þú færð póst ef álag er hærra en þetta gildi"
+msgid "New devfs device"
+msgstr "Nýtt devfs tæki"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "load setting"
-msgstr "álagsstillingar"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Þú fært póst ef ein af eftirfarandi þjónustum eru ekki lengur keyrandi"
+msgid "Boot Style Configuration"
+msgstr "Uppsetning ræsistíls"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Sjálfvirk tímastilling (með NTP)"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "service setting"
-msgstr "Þjónustustillingar"
+msgid "Backup files not found at %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd Þjónusta"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Þakka þér fyrir að velja Mandrake Linux 9.1"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Webmin Service"
-msgstr "Webmin Þjónusta"
+msgid "Armenian (phonetic)"
+msgstr "Armenskt (hljóðfræðilegt)"
 
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "SSH Server"
-msgstr "SSH Þjónn"
+msgid "Card model:"
+msgstr "Kort tegund:"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Samba Server"
-msgstr "Samba Miðlari"
+msgid "Thin Client"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix póstþjónn"
+msgid "Start Server"
+msgstr "Ræsa þjón"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ftp Server"
-msgstr "Ftp miðlari"
+msgid "Turkmenistan"
+msgstr "Túrkmenistan"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Domain Name Resolver"
-msgstr "Nafnauppflettingar léns"
+msgid "All remote machines"
+msgstr "Allar aðrar vélar"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web miðlari"
+msgid "Install themes"
+msgstr "Setja inn þema"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
-"Velkomin að póstuppsetningarforritnu.\n"
-"\n"
-"Hér getur þú stillt viðvörunarkerfi.\n"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "Mail alert configuration"
-msgstr "Uppsetning póstviðvörunnar"
+msgid "Espanol"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mail alert"
-msgstr "Póstviðvörun"
+msgid "Preparing installation"
+msgstr "Undirbý innsetningu"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Augnablik vinn úr skrá: %s"
+msgid "Edit selected host/network"
+msgstr "Breyta valinni vél/neti"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Content of the file"
-msgstr "Innihald skrár"
+msgid "Add User -->"
+msgstr "Bæta við notanda -->"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Calendar"
-msgstr "Dagatal"
+msgid "Nauru"
+msgstr "Nárú"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Choose file"
-msgstr "Veldu skrá"
+msgid "True Type fonts installation"
+msgstr "Innsetning True Type leturs"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "but not matching"
-msgstr "en passar ekki við"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "matching"
-msgstr "passar við"
+msgid "LAN configuration"
+msgstr "Staðarnets-uppsetning"
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Settings"
-msgstr "Stillingar"
+msgid "hard disk model"
+msgstr "tegund harðs disks"
 
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "A tool to monitor your logs"
-msgstr "Tól til að fylgjast með annálum"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Þú gtur ekki notað LVM sýndardisk fyrir tengipunkt %s"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "search"
-msgstr "leita"
+msgid "Get Windows Fonts"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Mandrake tólaskýringar"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Syslog"
-msgstr "Kerfisannáll"
+msgid "Iranian"
+msgstr "Íranskt"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Messages"
-msgstr "Skilaboð"
+msgid "Croatia"
+msgstr "Króvatía"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "User"
-msgstr "Notandi"
+msgid "Gateway:"
+msgstr "Gátt:"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/Help/_About..."
-msgstr "/Hjálp/_Um..."
+msgid "Add server"
+msgstr "Bæta við miðlara"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/Options/Test"
-msgstr "/Valkostir/Prófun"
+msgid "Remote printer name"
+msgstr "Vélarnafn fjartengds prentara"
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "/File/-"
-msgstr "/Skrá/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/File/Save _As"
-msgstr "/Skrá/Vista _sem"
+msgid "Device: "
+msgstr "Tæki: "
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
 #, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "/File/_Save"
-msgstr "/Skrá/_Vista"
+msgid "License agreement"
+msgstr "Notkunarskilmálar"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "Kerfisvalkostir"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "/File/_Open"
-msgstr "/Skrá/_Opna"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "Vinsamlega veldu öryggisþrep"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "/File/_New"
-msgstr "/Skrá/_Ný"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
+"Þessi vél er nú þegar á listanum, þú getur ekki bætt henni við aftur.\n"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Show only for the selected day"
-msgstr "Sýna aðeins fyrir valinn dag"
+msgid ", USB printer"
+msgstr ", USB prentari"
 
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Emulate third button?"
-msgstr "Herma eftir þriðja hnapp?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Veldu þau forrit sem eiga að styðja við letrin:"
 
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Please choose your mouse type."
-msgstr "Hvernig mús ertu með?"
+msgid "Configure X"
+msgstr "Stilla X"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Connect %s"
-msgstr "Tengist %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Tyrkneskt (hefðbundið \"F\" módel)"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Disconnect %s"
-msgstr "Aftengist %s"
+msgid "Congratulations!"
+msgstr "Til hamingju!"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr "Viðvörun, skynja aðra Internettengingum kannski um staðarnetið þitt"
+msgid "Use owner id for execution"
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "received"
-msgstr "móttók"
+msgid "Down"
+msgstr "Niður"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "transmitted"
-msgstr "sendi"
+msgid "Raw printer (No driver)"
+msgstr "Hrár prentari (enginn rekill)"
 
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "received: "
-msgstr "móttók: "
+msgid "Install rpm"
+msgstr "Setja inn rpm"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "sent: "
-msgstr "sendi: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Local measure"
-msgstr "Staðvær mæling"
+msgid "Time remaining "
+msgstr "Tími eftir "
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "average"
-msgstr "meðal"
+msgid "UK keyboard"
+msgstr "Breskt lyklaborð"
 
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Color configuration"
-msgstr "Litauppsetning"
+msgid "Unmount"
+msgstr "Aftengja"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Tenging mistókst\n"
-"Athugaðu uppsetninguna í Mandrake stjórnborði."
+msgid "Uninstall Fonts"
+msgstr "Fjarlægji letur"
 
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Connection complete."
-msgstr "Tenging uppsett."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Aftengingu frá Internetinu lokið"
+msgid "German (no dead keys)"
+msgstr "Þýskt (engir dauðir lyklar)"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Aftenging frá Internetinu mistókst."
+msgid "Transferring %s..."
+msgstr "Flyt %s..."
 
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Connecting to the Internet "
-msgstr "Tengjast internetinu "
+msgid "32 thousand colors (15 bits)"
+msgstr "32 þúsund litir (15 bits)"
 
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
 #, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Aftengjast frá Internetinu "
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Augnablik, prófa tengingu..."
+msgid "Reboot"
+msgstr "Endurræsa"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Logs"
-msgstr "Annálar"
+msgid "Gambia"
+msgstr "Gambía"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Connection Time: "
-msgstr "Tengitími: "
+msgid "Mandrake Control Center"
+msgstr "Mandrake Stjórnborð"
 
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Receiving Speed:"
-msgstr "Móttökuhraði:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Þú getur gefið upp ýmsar gáttir. \n"
+"gild dæmi eru 139/tcp 139/udp.\n"
+"Nánari upplýsingar eru t.d. í /etc/services"
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
 #, c-format
-msgid "Sending Speed:"
-msgstr "Sendihraði:"
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Statistics"
-msgstr "Tölulegar uppl."
+msgid "\t-Tape \n"
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
 #, c-format
-msgid "Profile "
-msgstr "Snið "
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Netstillingar"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
 
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Reading data of installed printers..."
-msgstr "Les gögn um uppsetta prentara..."
+msgid "Remember this password"
+msgstr "Muna þetta lykilorð"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Name/IP address of host:"
-msgstr "Nafn/IP-vistfang vélar:"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Samnýting Internetstengingar er nú virk."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid "\t-Network by SSH.\n"
 msgstr ""
-"Þessi vél er nú þegar á listanum, þú getur ekki bætt henni við aftur.\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Þú verður að gefa upp vélarnafn eða IP-vistfang.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "Nota laust pláss á Windows disksneiðinni"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Veldu vélar þar sem staðbundnir myndskannar ættu að vera aðgengilegir:"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s fannst á %s, stilla sjálfkrafa?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Sharing of local scanners"
-msgstr "Miðlun staðbundinna myndskanna"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "This machine"
-msgstr "Þessi vél"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 rekill: %s\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove selected host"
-msgstr "Fjarlægja valda vél"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Edit selected host"
-msgstr "Breyta valinni vél"
+msgid ""
+"\n"
+"                      DrakBackup Report \n"
+"\n"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Add host"
-msgstr "Bæta við vél"
+msgid "Choose the packages you want to install"
+msgstr "Veldu pakkana sem þú vilt setja inn"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Þetta eru vélarnar frá hverjum ætti að vera hægt að nota myndskanna:"
+msgid "Papua New Guinea"
+msgstr "Papúa Nýja-Gínea"
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Usage of remote scanners"
-msgstr "Nota myndskanna frá öðrum vélum"
+msgid "Serbian (cyrillic)"
+msgstr "Serbneskt (kýrílskt)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "All remote machines"
-msgstr "Allar aðrar vélar"
+msgid "Make kernel message quiet by default"
+msgstr "Skilaboð frá kjarna eru sjálfgefið ekki sýnileg"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
 msgstr ""
-"Þetta eru vélarnar sem deila sínum staðbundnu myndskönnum, og ættu því að "
-"vera aðgengilegir:"
+"Viltu setja þennan prentara (\"%s\")\n"
+"sem sjálfgefinn prentara?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Nota myndskanna á vélum: "
+msgid "The DHCP end range"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use scanners on remote computers"
-msgstr "Nota myndskanna á öðrum vélum"
+msgid "Creating bootdisk..."
+msgstr "Bý til ræsidiskling..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Miðla myndskanna til véla: "
+msgid "Wait please, testing your connection..."
+msgstr "Augnablik, prófa tengingu..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Myndskannar á þessarri vél eru einnig aðgengilegir frá öðrum vélum"
+msgid "Bringing down the network"
+msgstr "Keyri niður netið"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Þú getur einnig valið hvor myndskannar á fjarlægum vélum ættu að vera "
-"aðgengilegir frá þessari vél."
+msgid "Login ID"
+msgstr "Notendanafn"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
-"Hér getur þú valið hvort myndskanni tengur þessarri vél eigi að vera "
-"aðgengilegur frá öðrum vélum, og þá hvaða vélum."
+"NFS er vinsæl aðferð til skráarmiðlunar yfir TCP/IP net.\n"
+"Þessi þjónusta bætir skráarlæsingum við NFS."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Endurgeri lista af uppsettum myndskönnum ..."
+msgid "DHCP Client"
+msgstr "DHCP biðlari"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Searching for new scanners ..."
-msgstr "Leita að nýjum myndskönnum ..."
+msgid "dismiss"
+msgstr "hætta við"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Leita að uppsettum myndskönnum..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Prenta/skanna á \"%s\""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Scanner sharing"
-msgstr "Miðlun myndskanna"
+msgid "omit raid modules"
+msgstr "sleppa raid einingum"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
-msgid "Add a scanner manually"
-msgstr "Bæta við myndskanna handvirkt"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd er prentþjónn sem lpr þarfnast til að geta unnið sín verk.\n"
+"Þetta er í grunni þjónn sem deilir prentverkum á prentara."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Search for new scanners"
-msgstr "Leita að tiltækum myndskönnum"
+msgid "Internet Connection Configuration"
+msgstr "Internet uppsetning"
 
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Engir myndskannar fundust sem eru tiltækir fyrir kerfið þitt.\n"
+msgid "comma separated numbers"
+msgstr "tölur aðskildar með kommu"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
 msgstr ""
-"Eftirfarandi myndskanni\n"
-"\n"
-"%s\n"
-"er tiltækur á kerfinu þínu\n"
+"Þegar þú hefur valið tæki, sérð þú upplýsingar um tækið í svæðunum í "
+"gluggnum hægra megin (\"Upplýsingar\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Færa valda reglu upp um eitt þrep"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"The following scanners\n"
+"The following scanner\n"
 "\n"
 "%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
 msgstr ""
-"Eftirfarandi myndskannar\n"
+"Eftirfarandi myndskanni\n"
 "\n"
 "%s\n"
-"eru tiltækir á kerfinu þínu\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"%s þinn hefur nú verið stilltur\n"
-"Þú geetur nú skannað skjöl með því að velja \"Xsane\" í margmiðlun-grafík "
-"valmyndinni"
+"er tiltækur á kerfinu þínu\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "choose device"
-msgstr "veldu tæki"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Vitlu í alvöru fjarlægja prentarann \"%s\"?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Vinsamlega veldu gátt þar sem %s er tengdur"
+msgid "I can't find any room for installing"
+msgstr "Get ekki fundið meira pláss fyrir uppsetningu"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Searching for scanners ..."
-msgstr "Leita að myndlesara..."
+msgid "Default printer"
+msgstr "Sjálfgefinn prentari"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Auto-detect available ports"
-msgstr "Leita að mögulegum gáttum"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Þú hefur skilgreint nokkrar leiðir til að tengjast Internetinu.\n"
+"Veldi þá sem þú vilt nota.\n"
+"\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Athugið: Ekki er hægt að leita að hliðtengjum)"
+msgid "Modify RAID"
+msgstr "Breyta RAID"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
 msgstr ""
-"%s verður að vera uppsettur af prinerdrake.\n"
-"Þú getur ræst printerdrake frá Mandrake stjórnborðinu í vélbúnaðar- "
-"uppsetningahluta"
+"Ég hef fundið ISDN PCI kort, en ég veit ekki hvaða tegund. Vinsamlega veldu "
+"tegund á næsta skjá."
 
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "The %s is unsupported"
-msgstr "Enginn stuðningur við %s"
+msgid "Add user"
+msgstr "Bæta við notanda"
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "%s er óþekkt af þessarrí útgáfu af ScannerDrake"
+msgid "RAID-disks %s\n"
+msgstr "RAID-diskar %s\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Það er ekki stuðningur fyrir %s í þessari útgáfu af Mandrake Linux"
+msgid "Liberia"
+msgstr "Líbería"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Port: %s"
-msgstr "Gátt: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Veldu lyklaborð"
 
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Detected model: %s"
-msgstr "Fann tegund: %s"
+msgid "Format partitions"
+msgstr "Forsníða disksneiðar"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Sjáfvirk leiðrétting á CUPS uppsetningu"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Select a scanner model"
-msgstr "Veldu tegund myndskanna"
+msgid "Running \"%s\" ..."
+msgstr "Keyri \"%s\"..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s er ekki í grunni um myndskanna, stilla handvirkt?"
+msgid "enable radio support"
+msgstr "virkja útvarps stuðning"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s fannst á %s, stilla sjálfkrafa?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Vélbúnaðarskönnun í gangi"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Nokkrum tækjum var bætt við:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Nokkur tæki í \"%s\" vélbúnaðarhlutanum voru fjarlægð:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Miðla myndskanna til véla: "
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+msgid "Loopback file name: %s"
 msgstr ""
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Veldu prentara sém á að fá send prentverkin"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Þakka þér fyrir að velja Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Ekki flytja prentara"
 
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Töf áður en sjálfgefin ræsing byrjar"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
 
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Smelltu á disksneið"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
+msgid "user"
+msgstr "notandi"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+msgid "Use Hard Disk to backup"
 msgstr ""
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Configure"
+msgstr "Stilla"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Sel stillingar"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
 msgstr ""
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "A customizable environment"
+msgid "Backup Users"
 msgstr ""
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
-msgstr ""
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
+"Sláðu inn heiti vélarinnar.  Vélarheitið þarf að vera fullt \n"
+"heiti, t.d. odinn.grimsey.is  Þú mátt líka slá inn IP \n"
+"vistfang gáttarinnar ef þú veist hvað það vistfang er.\n"
+"Gáttin gefur þér aðgang út úr staðarnetinu (t.d. á Internetið)."
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
+msgid "Select Printer Spooler"
+msgstr "Veldu biðraðastjóra"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Create new theme"
+msgstr "Búa til nýtt þema"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+msgid "Mandrake Tools Explanation"
+msgstr "Mandrake tólaskýringar"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "The official MandrakeSoft Store"
-msgstr ""
+msgid "No image found"
+msgstr "fann engan ræsikjarna"
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
+"Sumir mikilvægir pakkar voru ekki uppsettir eðlilega.\n"
+"Annaðhvort er geisladiskurinn eða drifið skemmt.\n"
+"Athugaðu geisladiskinn á uppsettri vél með skipuninni\n"
+"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "Fann tegund: %s"
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+msgid "Azerbaijan"
+msgstr "Asjerbæjan"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "Ekkert segulband í %s!"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr "Þetta er vélbúnaðarbrautin sem tækið er tengt á (þ.e. PCI USB,...)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Hvernig er þessi prentari tengdur?"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Gerstu Mandrake snillingur"
+msgid "Security level"
+msgstr "Öryggisþrep"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+msgid "final resolution"
+msgstr "endanleg upplausn"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Þjónustur"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "snillingur"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
 
 #: ../../share/compssUsers:999
 msgid "Office Workstation"
@@ -17009,10 +17047,6 @@ msgstr ""
 "gnumeric) pdf skoðarar, o.s.frv"
 
 #: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Vinnustöð"
-
-#: ../../share/compssUsers:999
 msgid "Game station"
 msgstr "Leikja-(vinnu)stöð"
 
@@ -17083,10 +17117,6 @@ msgid ""
 msgstr "KDE (K Desktop Environment). Gluggastjóri með safni hjálparforrita"
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Myndrænt umhverfi"
-
-#: ../../share/compssUsers:999
 msgid "Gnome Workstation"
 msgstr "Gnome vinnustöð"
 
@@ -17105,10 +17135,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr "Icewm, Window Maker, Enlightenment, Fvwm, o.s.frv"
 
 #: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Forritunartól"
-
-#: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr "C og C++ undirforritasöfn, forrit og lýsingaskrár"
 
@@ -17178,47 +17204,83 @@ msgstr "NFS-þjónn, SMB-þjónn, Proxy-þjónn ssh-þjónn"
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Margmiðlunar-vinnustöð"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Tól og tæki til að lesa og senda póst og fréttir (pine, mutt,tin...) og til "
+"að flakka á vefnum"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internet tenging og stilling"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Stilla nettengingu"
+
+#~ msgid "Disconnect"
+#~ msgstr "Aftengja"
+
+#~ msgid "Connect"
+#~ msgstr "Tengjast"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Þú getur endurstillt tenginguna þína."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Þú getur tengst Internetinu eða endurstillt tenginguna þína."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Þú ert ekki tengdur Internetinu."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Þú getur aftengst eða endurstillt tenginguna þína."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Þú ert tengdur Internetinu."
+
+#~ msgid "Write %s"
+#~ msgstr "Skrifa %s"
+
+#~ msgid "Author:"
+#~ msgstr "Höfundur:"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Spila og breyta hljóðskrám og kvikmyndum"
+#~ msgid "Audio station"
+#~ msgstr "Margmiðlunar-vinnustöð"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Leikja-(vinnu)stöð"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Spila og breyta hljóðskrám og kvikmyndum"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video playing programs"
-msgstr "Spila og breyta hljóðskrám og kvikmyndum"
+#~ msgid "Video station"
+#~ msgstr "Leikja-(vinnu)stöð"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Leikja-(vinnu)stöð"
+#~ msgid "Video playing programs"
+#~ msgstr "Spila og breyta hljóðskrám og kvikmyndum"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "Grafísk forrit eins og Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "Leikja-(vinnu)stöð"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Tól og tæki til að lesa og senda póst og fréttir (pine, mutt,tin...) og til "
-"að flakka á vefnum"
+#~ msgid "Graphics programs"
+#~ msgstr "Grafísk forrit eins og Gimp"
 
 #~ msgid "Printer sharing"
 #~ msgstr "Miðlun prentara"
 
-#~ msgid "%s"
-#~ msgstr "%s"
-
 #~ msgid "Office"
 #~ msgstr "Skrifstofuforrit"