updated Bosnian, Basque, Farsi, Italian, Portuguese and Chinese files

1 files changed, 543 insertions, 434 deletions

diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
index 7f2baf037..b81b3496a 100644
--- a/perl-install/share/po/bs.po
+++ b/perl-install/share/po/bs.po
@@ -7,8 +7,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-bs\n"
-"POT-Creation-Date: 2003-09-09 17:07+0200\n"
-"PO-Revision-Date: 2003-09-05 16:52+0200\n"
+"POT-Creation-Date: 2003-09-16 13:45+0200\n"
+"PO-Revision-Date: 2003-09-20 12:33+0200\n"
 "Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
 "Language-Team: Bosnian <lokal@lugbih.org>\n"
 "MIME-Version: 1.0\n"
@@ -66,9 +66,9 @@ msgid "Please insert floppy disk:"
 msgstr "Molim ubacite disketu:"
 
 #: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
+#, c-format
 msgid "DrakTermServ"
-msgstr "drakTermServ pregled"
+msgstr "DrakTermServ"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
@@ -195,7 +195,7 @@ msgstr ""
 "Ako je uključeno, šalje mail izvještaj na ovu email adresu, inače ga šalje "
 "root-u"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Parameters"
 msgstr "Parametri"
@@ -513,6 +513,11 @@ msgstr "Sabirnica"
 msgid "Iraq"
 msgstr "Irak"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "connecting to %s ..."
+msgstr "spajam se na %s..."
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Potential LAN address conflict found in current config of %s!\n"
@@ -557,6 +562,21 @@ msgstr "Pretraži instalirane fontove"
 msgid "Default desktop"
 msgstr "Desktop"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid ""
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window on %s\n"
+" where you'll find a form to fill in.  The information displayed above will "
+"be \n"
+"transferred to that server."
+msgstr ""
+"Da prijavite bug, kliknite na dugme Prijavi.\n"
+"Ovo će otvoriti prozor web browsera na %s\n"
+" gdje ćete pronaći formular koji treba popuniti. Gore prikazane informacije "
+"će biti  \n"
+"poslane na taj server."
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Venezuela"
@@ -1159,6 +1179,61 @@ msgstr ""
 "Protokol za ostatak svijeta \n"
 " bez D-kanala (iznajmljene linije)"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - /etc/xinetd.d/tftp:\n"
+"        \tdrakTermServ will configure this file to work in conjunction with "
+"the images created\n"
+"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to \n"
+"        \teach diskless client.\n"
+"\n"
+"        \tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \tservice tftp\n"
+"\t\t\t{\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t}\n"
+"        \t\t\n"
+"        \tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \tputs its images."
+msgstr ""
+"        - /etc/xinetd.d/tftp:\n"
+"        \tdrakTermServ will configure this file to work in conjunction with "
+"the images created\n"
+"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to \n"
+"        \teach diskless client.\n"
+"\n"
+"        \tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \tservice tftp\n"
+"\t\t\t{\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t}\n"
+"        \t\t\n"
+"        \tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \tputs its images."
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Option %s must be a number!"
@@ -1830,16 +1905,16 @@ msgstr ""
 msgid "Use the %c and %c keys for selecting which entry is highlighted."
 msgstr "Koristite tipke %c i %c za izbor jedne od opcija."
 
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Uključite \"%s\" da izvršite datoteku"
-
 #: ../../mouse.pm:1
 #, c-format
 msgid "Generic 2 Button Mouse"
 msgstr "Opšti miš sa 2 dugmeta"
 
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Enable \"%s\" to execute the file"
+msgstr "Uključite \"%s\" da izvršite datoteku"
+
 #: ../../lvm.pm:1
 #, c-format
 msgid "Remove the logical volumes first\n"
@@ -3066,6 +3141,35 @@ msgstr "Ovo je obavezan paket, ne može biti isključen"
 
 #: ../../standalone/drakTermServ:1
 #, c-format
+msgid ""
+"        - Create etherboot floppies/CDs:\n"
+"        \tThe diskless client machines need either ROM images on the NIC, or "
+"a boot floppy\n"
+"        \tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these\n"
+"        \timages, based on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
+msgstr ""
+"        - Create etherboot floppies/CDs:\n"
+"        \tThe diskless client machines need either ROM images on the NIC, or "
+"a boot floppy\n"
+"        \tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these\n"
+"        \timages, based on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
 msgid "Etherboot ISO image is %s"
 msgstr "Etherboot ISO image je %s"
 
@@ -3475,35 +3579,6 @@ msgstr "Sakrij datoteke"
 msgid "Auto-detect printers connected to this machine"
 msgstr "Automatski prepoznaj štampače spojene na ovaj računar"
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-"XawTV nije instaliran!\n"
-"\n"
-"\n"
-"Ako imate TV karticu ali je DrakX nije prepoznao (ni bttv ni saa7134 modul "
-"se ne\n"
-"nalaze u \"/etc/modules\") niti je instalirao XawTV, molim pošaljite "
-"rezultate naredbe\n"
-"\"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\" sa naslovom "
-"\"undetected\n"
-"TV card\".\n"
-"\n"
-"\n"
-"Možete instalirati XawTV kucajući \"urpmi xawtv\" na konzoli kao root."
-
 #: ../../any.pm:1
 #, c-format
 msgid "Sorry, no floppy drive available"
@@ -3770,9 +3845,9 @@ msgid "Re-generating list of configured scanners ..."
 msgstr "Regeneriram listu podešenih skenera ..."
 
 #: ../../modules/interactive.pm:1
-#, fuzzy, c-format
+#, c-format
 msgid "Module configuration"
-msgstr "Ručno podešavanje"
+msgstr "Podešavanje modula"
 
 #: ../../harddrake/data.pm:1
 #, c-format
@@ -4084,6 +4159,18 @@ msgstr "/etc/hosts.allow i /etc/hosts.deny su već podešeni - bez izmjene"
 msgid "Restore From Tape"
 msgstr "Vrati sa trake"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid ""
+"To submit a bug report, click the report button, which will open your "
+"default browser\n"
+"to Anthill where you will be able to upload the above information as a bug "
+"report."
+msgstr ""
+"Da prijavite bug, kliknite na dugme Prijavi, koje će u vašem web browseru\n"
+"otvoriti Anthill, gdje ćete moći poslati gore prikazane informacije kao "
+"prijavu buga."
+
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "Choose the profile to configure"
@@ -4241,7 +4328,7 @@ msgstr ""
 msgid "Need hostname, username and password!"
 msgstr "Potrebno ime računara, korisničko ime i šifra!"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid "Insert floppy"
 msgstr "Ubacite disketu"
@@ -4383,10 +4470,24 @@ msgstr "Mrežni interfejs je već podešen"
 msgid "Couldn't access the floppy!"
 msgstr "Ne mogu pristupiti disketi!"
 
-#: ../../standalone/drakbug:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "spajam se na Bugzilla čarobnjak..."
+msgid ""
+"Warning: Free Software may not necessarily be patent free, and some Free\n"
+"Software included may be covered by patents in your country. For example, "
+"the\n"
+"MP3 decoders included may require a licence for further usage (see\n"
+"http://www.mp3licensing.com for more details). If you are unsure if a "
+"patent\n"
+"may be applicable to you, check your local laws."
+msgstr ""
+"Upozorenje: Slobodan softver ne mora obavezno biti slobodan od patenata\n"
+"i neki elementi slobodnog softvera mogu biti obuhvaćeni patentima u vašoj\n"
+"zemlji. Npr. MP3 dekoderi koji su uključeni možda zahtijevaju licencu za "
+"daljnje\n"
+"korištenje (za više detalja, pogledajte http://www.mp3licensing.com). Ako "
+"niste\n"
+"sigurni da li se patent odnosi na vas, provjerite vaše lokalne zakone."
 
 #: ../../network/drakfirewall.pm:1
 #, c-format
@@ -4576,6 +4677,11 @@ msgstr "Prihvati"
 msgid "Description"
 msgstr "Opis"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Please enter summary text."
+msgstr "Molimo unesite tekst sažetka."
+
 #: ../../fsedit.pm:1
 #, c-format
 msgid "Error opening %s for writing: %s"
@@ -5538,7 +5644,7 @@ msgstr ""
 msgid "Right Control key"
 msgstr "Desna Control tipka"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid ""
 "Insert a FAT formatted floppy in drive %s with %s in root directory and "
@@ -6669,6 +6775,33 @@ msgstr "Upozorenje: IP adresa %s je obično rezervisana !"
 msgid "busmouse"
 msgstr "busmouse"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
+"be created.\n"
+"        \tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical \n"
+"        \tinterface to help manage/customize these images. To create the "
+"file \n"
+"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
+msgstr ""
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
+"be created.\n"
+"        \tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical \n"
+"        \tinterface to help manage/customize these images. To create the "
+"file \n"
+"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
+
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Account Login (user name)"
@@ -7045,37 +7178,6 @@ msgstr ""
 msgid "Floppy"
 msgstr "Disketa"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network."
-
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Ghostscript referencing"
@@ -7726,6 +7828,11 @@ msgstr "Dijeljenje Internet konekcije"
 msgid "Choose file"
 msgstr "Izaberi datoteku"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Summary: "
+msgstr "Ukratko: "
+
 #: ../../network/shorewall.pm:1
 #, c-format
 msgid ""
@@ -7806,6 +7913,23 @@ msgstr "Francuske Južne Teritorije"
 msgid "the vendor name of the processor"
 msgstr "naziv proizvođača procesora"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain %s:\n"
+"        \tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
+"        \thelps in this respect by adding or removing system users from this "
+"file."
+msgstr ""
+"        - Čuvaj %s:\n"
+"        \t\tDa bi se korisnici mogli prijaviti na sistem sa klijenta bez "
+"diska, njihova stavka u\n"
+"        \t\t/etc/shadow se mora kopirati u %s. drakTermServ pomaže\n"
+"        \t\tu ovome tako što dodaje i briše sistemske korisnike iz ove "
+"datoteke."
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "All data on this partition should be backed-up"
@@ -8129,6 +8253,11 @@ msgstr "Vrati korisnike"
 msgid "Encryption key for %s"
 msgstr "Ključ enkripcije za %s"
 
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to recover your system?"
+msgstr "Da li želite obnoviti vaš sistem?"
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -8569,6 +8698,11 @@ msgstr "/_Podešavanje CUPSa"
 msgid ", "
 msgstr ", "
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit lspci"
+msgstr "Pošalji lspci"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Remove selected host/network"
@@ -8808,6 +8942,11 @@ msgstr ""
 "\n"
 "Sada ću podesiti vašu Lokalnu mrežu sa ovim adapterom."
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit cpuinfo"
+msgstr "Pošalji cpuinfo"
+
 #: ../../install_steps_gtk.pm:1
 #, c-format
 msgid "Minimal install"
@@ -8818,6 +8957,11 @@ msgstr "Minimalna instalacija"
 msgid "Ethiopia"
 msgstr "Etiopija"
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "YES"
+msgstr "DA"
+
 #: ../../security/l10n.pm:1
 #, c-format
 msgid "Enable \"crontab\" and \"at\" for users"
@@ -9160,15 +9304,6 @@ msgstr "Vrsta instalacije"
 msgid "Printer \"%s\" on SMB/Windows server \"%s\""
 msgstr "Štampač \"%s\" na SMB/Windows serveru \"%s\""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Demon (%s) uključuje :\n"
-
 #: ../../modules/parameters.pm:1
 #, c-format
 msgid "%d comma separated numbers"
@@ -9489,6 +9624,11 @@ msgstr "Monitor HorizSync: %s\n"
 msgid "Path"
 msgstr "Staza"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "NOT FOUND"
+msgstr "NIJE PRONAĐEN"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -10094,25 +10234,6 @@ msgstr "važno"
 msgid "Total Progress"
 msgstr "Ukupan napredak"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - Čuvaj /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tDa bi se korisnici mogli prijaviti na sistem sa klijenta bez "
-"diska, njihova stavka u\n"
-"        \t\t/etc/shadow se mora kopirati u /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ pomaže\n"
-"        \t\tu ovome tako što dodaje i briše sistemske korisnike iz ove "
-"datoteke."
-
 #: ../../help.pm:1
 #, c-format
 msgid ""
@@ -10245,6 +10366,41 @@ msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr ""
 "Koristi inkrementalni/diferencijalni backup  (nemoj prebrisati stare backupe)"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP \n"
+"        \taddress and net boot images to the machine. drakTermServ helps "
+"create/remove \n"
+"        \tthese entries.\n"
+"\t\t\t\n"
+"        \t(PCI cards may omit the image - etherboot will request the correct "
+"image. \n"
+"\t\t\tYou should also consider that when etherboot looks for the images, it "
+"expects \n"
+"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
+msgstr ""
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP \n"
+"        \taddress and net boot images to the machine. drakTermServ helps "
+"create/remove \n"
+"        \tthese entries.\n"
+"\t\t\t\n"
+"        \t(PCI cards may omit the image - etherboot will request the correct "
+"image. \n"
+"\t\t\tYou should also consider that when etherboot looks for the images, it "
+"expects \n"
+"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
+
 #: ../../harddrake/sound.pm:1
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
@@ -10364,6 +10520,15 @@ msgstr ""
 "x koordinata tekst polja\n"
 "u broju znakova"
 
+#: ../../fsedit.pm:1
+#, c-format
+msgid ""
+"You may not be able to install lilo (since lilo doesn't handle a LV on "
+"multiple PVs)"
+msgstr ""
+"Možda nećete biti u mogućnosti instalirati lilo (pošto lilo ne može rukovati "
+"LVom ili sa više PVa)"
+
 #: ../../install_steps_gtk.pm:1
 #, c-format
 msgid "Updating package selection"
@@ -10661,6 +10826,16 @@ msgstr "Potrebno ime računara"
 msgid "Unselect fonts installed"
 msgstr "Isključi instalirane fontove"
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Sa točkićem"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit kernel version"
+msgstr "Pošalji verziju kernela"
+
 #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1
@@ -10682,11 +10857,6 @@ msgstr "Odustani"
 msgid "Searching for configured scanners ..."
 msgstr "Tražim podešene skenere ..."
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Wheel"
-msgstr "Sa točkićem"
-
 #: ../../harddrake/data.pm:1
 #, c-format
 msgid "Videocard"
@@ -10755,6 +10925,11 @@ msgstr "Default"
 msgid "Button 2 Emulation"
 msgstr "Emulacija 2 dugmeta"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Please enter a package name."
+msgstr "Molim navedite ime paketa."
+
 #: ../../security/l10n.pm:1
 #, c-format
 msgid "Run chkrootkit checks"
@@ -10838,6 +11013,11 @@ msgstr ""
 "\tStew Benedict sbenedict\\@mandrakesoft.com\n"
 "\n"
 
+#: ../../install_messages.pm:1
+#, c-format
+msgid "http://www.mandrakelinux.com/en/92errata.php3"
+msgstr "http://www.mandrakelinux.com/en/92errata.php3"
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Honduras"
@@ -11006,6 +11186,79 @@ msgstr "Ključ za kodiranje datotečnog sistema"
 msgid "Gujarati"
 msgstr "Gujarati"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        While you can use a pool of IP addresses, rather than setup a "
+"specific entry for\n"
+"        a client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"        of client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
+"either be 'thin'\n"
+"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+"        most software on the client machine. A special inittab, %s is\n"
+"        written for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"        modified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+"        subnet.\n"
+"\t\t\t\n"
+"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
+"Clients can either \n"
+"        be 'true' or 'false'.  'true' enables root login at the client "
+"machine and allows local \n"
+"        hardware configuration of sound, mouse, and X, using the 'drak' "
+"tools. This is enabled \n"
+"        by creating separate config files associated with the client's IP "
+"address and creating \n"
+"        read/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+"        with the configuration, you can remove root login privileges from "
+"the client.\n"
+"\t\t\t\n"
+"        Note: You must stop/start the server after adding or changing "
+"clients."
+msgstr ""
+"        While you can use a pool of IP addresses, rather than setup a "
+"specific entry for\n"
+"        a client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"        of client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
+"either be 'thin'\n"
+"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+"        most software on the client machine. A special inittab, %s is\n"
+"        written for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"        modified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+"        subnet.\n"
+"\t\t\t\n"
+"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
+"Clients can either \n"
+"        be 'true' or 'false'.  'true' enables root login at the client "
+"machine and allows local \n"
+"        hardware configuration of sound, mouse, and X, using the 'drak' "
+"tools. This is enabled \n"
+"        by creating separate config files associated with the client's IP "
+"address and creating \n"
+"        read/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+"        with the configuration, you can remove root login privileges from "
+"the client.\n"
+"\t\t\t\n"
+"        Note: You must stop/start the server after adding or changing "
+"clients."
+
 #: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
@@ -11327,79 +11580,6 @@ msgstr ""
 "\n"
 "http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run \n"
-"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
-"\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
-"security issues in \n"
-"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"\t\t\tsubnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine "
-"and allows local \n"
-"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
-"This is enabled \n"
-"\t\t\tby creating separate config files associated with the client's IP "
-"address and creating \n"
-"\t\t\tread/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"\t\t\twith the configuration, you can remove root login privileges from the "
-"client.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients."
-msgstr ""
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run \n"
-"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
-"\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
-"security issues in \n"
-"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"\t\t\tsubnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine "
-"and allows local \n"
-"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
-"This is enabled \n"
-"\t\t\tby creating separate config files associated with the client's IP "
-"address and creating \n"
-"\t\t\tread/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"\t\t\twith the configuration, you can remove root login privileges from the "
-"client.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients."
-
 #: ../../standalone/drakconnect:1
 #, c-format
 msgid "Configure Local Area Network..."
@@ -11814,38 +11994,14 @@ msgstr "/dev/hda"
 msgid "/dev/hdb"
 msgstr "/dev/hdb"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
+"Application Name\n"
+"or Full Path:"
 msgstr ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
+"Ime aplikacije\n"
+"ili puni put:"
 
 #: ../../services.pm:1
 #, c-format
@@ -11937,7 +12093,7 @@ msgstr "Ne šalji mailove kada nije potrebno"
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Your scanner(s) will not be available on the network."
-msgstr ""
+msgstr "Vaši skeneri neće biti dostupni putem mreže."
 
 #: ../../standalone/drakbackup:1
 #, c-format
@@ -12020,10 +12176,9 @@ msgid ""
 "And, of course, push multimedia to its limits with the very latest software "
 "to play videos, audio files and to handle your images or photos."
 msgstr ""
-"Mandrake Linux 9.2 vam omogućuje da potjerate vaš multimedijalni računar do "
-"krajnjih granica! Koristite najnoviji softver za slušanje muzike i audio "
-"datoteka, mijenjajte i organizujte vaše slike i fotografije, gledajte TV i "
-"video-snimke i mnogo drugog"
+"I naravno da potjerate vaš multimedijalni računar do krajnjih granica! "
+"Koristite najnoviji softver za slušanje muzike i audio datoteka, mijenjajte "
+"i organizujte vaše slike i fotografije."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
@@ -12232,27 +12387,6 @@ msgid "You will receive an alert if the load is higher than this value"
 msgstr ""
 "Primićete upozorenje ako je opterećenje (system load) veće od ove vrijednosti"
 
-#: ../../standalone/drakbug:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"Da prijavite bug, kliknite na dugme Prijavi.\n"
-"Ovo će otvoriti prozor web browsera na https://drakbug.mandrakesoft.com\n"
-" gdje ćete pronaći formular koji treba popuniti. Gore prikazane informacije "
-"će biti  \n"
-"poslane na taj server\n"
-"\n"
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Add a scanner manually"
@@ -12392,7 +12526,7 @@ msgid "Set the shell timeout. A value of zero means no timeout."
 msgstr ""
 "Postavlja istek vremena shella. Vrijednost nula znači bez isteka vremena."
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid "Firmware copy succeeded"
 msgstr "Kopiranje firmware-a uspjelo"
@@ -12767,11 +12901,6 @@ msgstr ""
 "Štampač \"%s\" već postoji,\n"
 "da li sigurno želite prepisati ovu konfiguraciju?"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No partition available"
-msgstr "Nema dostupnih particija"
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Use the scanners on hosts: "
@@ -12782,6 +12911,11 @@ msgstr "Koristi skenere na računaru:"
 msgid "Unselected All"
 msgstr "Ništa izabrano"
 
+#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "Nema dostupnih particija"
+
 #: ../../standalone/printerdrake:1
 #, c-format
 msgid "Printer Management \n"
@@ -12822,7 +12956,7 @@ msgstr "Izgradi cijeli kernel -->"
 msgid "modem"
 msgstr "modem"
 
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
 #, c-format
 msgid "Welcome to %s"
 msgstr "Dobro došli u %s"
@@ -12906,6 +13040,15 @@ msgstr ""
 msgid "Not the correct CD label. Disk is labelled %s."
 msgstr "Neispravna oznaka CDa. Oznaka diska je %s."
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Daemon, %s via:\n"
+msgstr ""
+"\n"
+"- Demon (%s) preko:\n"
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid ""
@@ -13042,41 +13185,6 @@ msgstr ""
 "\n"
 "- sistemske datoteke:\n"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be turned\n"
-"        back off, retaining the configuration files, once the client machine "
-"is configured."
-msgstr ""
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be turned\n"
-"        back off, retaining the configuration files, once the client machine "
-"is configured."
-
 #: ../../standalone/drakbug:1
 #, c-format
 msgid "Standalone Tools"
@@ -13133,6 +13241,9 @@ msgid ""
 "During installation, you will need to use the Right Control\n"
 "key to switch between the different keyboard layouts."
 msgstr ""
+"Ova postavka će biti aktivirana nakon instalacije.\n"
+"Tokom instalacije, trebate koristiti desnu Control\n"
+"tipku da prebacujete između raznih rasporeda tastature."
 
 #: ../../lang.pm:1
 #, c-format
@@ -13926,7 +14037,7 @@ msgstr "Izgradite budućnost Linuxa!"
 msgid "Local Printer"
 msgstr "Lokalni štampač"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid "Floppy access error, unable to mount device %s"
 msgstr "Greška pri pristupu disketi, ne mogu montirati uređaj %s"
@@ -14031,61 +14142,6 @@ msgstr "Uređaj miša: %s\n"
 msgid "Reselect correct fonts"
 msgstr "Ponovo izaberi ispravne fontove"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs its images."
-
 #: ../../help.pm:1
 #, c-format
 msgid ""
@@ -14416,6 +14472,11 @@ msgstr "Maj"
 msgid "Yaboot mode"
 msgstr "Yaboot mod"
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Opšti miš sa 3 dugmeta"
+
 #: ../../standalone/drakxtv:1
 #, c-format
 msgid "USA (cable)"
@@ -14431,11 +14492,6 @@ msgstr ""
 "Izvršite \"lilo\" kao root u komandnoj liniji da dovršite instalaciju LiLo "
 "teme."
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Opšti miš sa 3 dugmeta"
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Select another media to restore from"
@@ -14780,35 +14836,6 @@ msgstr ""
 " --id <id_label>       - učitaj HTML help stranicu koja se odnosi na "
 "id_label\n"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
-msgstr ""
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Select a scanner model"
@@ -15206,11 +15233,6 @@ msgstr "Ime domena"
 msgid "Sharing of local printers"
 msgstr "Dijeljenje lokalnih štampača"
 
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/92errata.php3"
-msgstr "http://www.mandrakelinux.com/en/92errata.php3"
-
 #: ../../security/help.pm:1
 #, c-format
 msgid "Enable/Disable libsafe if libsafe is found on the system."
@@ -15221,6 +15243,11 @@ msgstr "Uključi/isključi libsafe ako je libsafe pronađen na sistemu."
 msgid "Available printers"
 msgstr "Dostupni štampači"
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "NO"
+msgstr "NE"
+
 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Empty"
@@ -15254,31 +15281,6 @@ msgstr ""
 "\n"
 "Pritisnite \"%s\" za nastavak."
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images. To create the file \n"
-"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \t\tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images. To create the file \n"
-"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \t\tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-
 #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Interface \"%s\""
@@ -16106,6 +16108,23 @@ msgstr "FATALNO"
 msgid "Refresh the list"
 msgstr "Osvježi listu"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client %s:\n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tdrakTermServ will help create these files."
+msgstr ""
+"        - Per client %s:\n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tdrakTermServ will help create these files."
+
 #: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
@@ -16475,7 +16494,7 @@ msgstr "Japanska 106 tipki"
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
+msgstr "Ne mogu instalirati pakete koji su potrebni za dijeljenje skenera."
 
 #: ../../standalone/drakTermServ:1
 #, c-format
@@ -16671,12 +16690,17 @@ msgstr "Opšti"
 msgid "Cylinder %d to %d\n"
 msgstr "Cilindar %d do %d\n"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "YOUR TEXT HERE"
+msgstr "VAŠ TEKST OVDJE"
+
 #: ../../standalone/drakconnect:1
 #, c-format
 msgid "New profile..."
 msgstr "Novi profil..."
 
-#: ../../standalone/draksec:1
+#: ../../modules/interactive.pm:1 ../../standalone/draksec:1
 #, c-format
 msgid "NONE"
 msgstr "NIŠTA"
@@ -17113,7 +17137,7 @@ msgstr "Dodaj računar/mrežu"
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Scannerdrake will not be started now."
-msgstr ""
+msgstr "Sada će biti pokrenut Scannerdrake."
 
 #: ../../standalone/harddrake2:1
 #, c-format
@@ -17260,6 +17284,11 @@ msgstr "Drugi multimedijalni uređaj"
 msgid "burner"
 msgstr "pržilica"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Bug Description/System Information"
+msgstr "Opis buga/Sistemske informacije"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid " (Default is all users)"
@@ -17393,6 +17422,41 @@ msgstr "Opcije dialupa"
 msgid "If no port is given, 631 will be taken as default."
 msgstr "Ako nije naveden port, podrazumijevaće se 631."
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client system configuration files:\n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+"        Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local "
+"configuration can be\n"
+"        turned back off, retaining the configuration files, once the client "
+"machine is configured."
+msgstr ""
+"        - Per client system configuration files:\n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+"        Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local "
+"configuration can be\n"
+"        turned back off, retaining the configuration files, once the client "
+"machine is configured."
+
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
@@ -17622,7 +17686,7 @@ msgstr ""
 "LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/"
 "lp1, ...)."
 
-#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
 msgid "Next"
 msgstr "Sljedeći"
@@ -18944,7 +19008,7 @@ msgstr " ADSL"
 msgid "format of floppies supported by the drive"
 msgstr "format disketa koje podržava jedinica"
 
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
 #, c-format
 msgid "Firmware copy failed, file %s not found"
 msgstr "Kopiranje firmware-a nije uspjelo, datoteka %s nije pronađena"
@@ -19605,9 +19669,9 @@ msgid "The %s is not supported by this version of Mandrake Linux."
 msgstr "Ova verzija Mandrake Linuxa ne podržava %s,"
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#, c-format
 msgid "tape"
-msgstr "Traka"
+msgstr "traka"
 
 #: ../../standalone/drakconnect:1
 #, c-format
@@ -19647,6 +19711,11 @@ msgstr ""
 "\n"
 "Slažete li se sa gubitkom svih particija?\n"
 
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Find Package"
+msgstr "Nađi paket"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Are you sure that you want to set up printing on this machine?\n"
@@ -19762,6 +19831,37 @@ msgstr "Podešavanje LANa"
 msgid "hard disk model"
 msgstr "model hard diska"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/exports:\n"
+"        \tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \tdiskless clients.\n"
+"\n"
+"        \tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t/\t\t\t\t\t(ro,all_squash)\n"
+"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"        \tWith SUBNET/MASK being defined for your network."
+msgstr ""
+"        - Maintain /etc/exports:\n"
+"        \tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \tdiskless clients.\n"
+"\n"
+"        \tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t/\t\t\t\t\t(ro,all_squash)\n"
+"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"        \tWith SUBNET/MASK being defined for your network."
+
 #: ../../fsedit.pm:1
 #, c-format
 msgid "You can't use a LVM Logical Volume for mount point %s"
@@ -19880,9 +19980,9 @@ msgid "Configure X"
 msgstr "Podešavanje X"
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#, c-format
 msgid "hd"
-msgstr "Čad"
+msgstr "hd"
 
 #: ../../keyboard.pm:1
 #, c-format
@@ -19949,16 +20049,16 @@ msgstr "UK tastatura"
 msgid "Unmount"
 msgstr "Demontiraj"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Uninstall Fonts"
-msgstr "Deinstaliraj fontove"
-
 #: ../../mouse.pm:1
 #, c-format
 msgid "Microsoft Explorer"
 msgstr "Microsoft Explorer"
 
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Uninstall Fonts"
+msgstr "Deinstaliraj fontove"
+
 #: ../../keyboard.pm:1
 #, c-format
 msgid "German (no dead keys)"
@@ -20291,6 +20391,8 @@ msgstr "Liberija"
 msgid ""
 "Could not install the packages needed to set up a scanner with Scannerdrake."
 msgstr ""
+"Ne mogu instalirati pakete koji su potrebni za podešavanje skenera pomoću "
+"Scannerdrake-a."
 
 #: ../../standalone/drakgw:1
 #, c-format
@@ -20334,23 +20436,6 @@ msgstr "Izvršavam \"%s\" ..."
 msgid "enable radio support"
 msgstr "uključi radio podršku"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \t\tdrakTermServ will help create these files."
-msgstr ""
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \t\tdrakTermServ will help create these files."
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Scanner sharing to hosts: "
@@ -20781,6 +20866,33 @@ msgstr "NFS server, SMB server, Proxy server, ssh server"
 msgid "Set of tools to read and send mail and news and to browse the Web"
 msgstr "Skup alata za čitanje i slanje pošte i news-a i pregledanje weba"
 
+#~ msgid ""
+#~ "XawTV isn't installed!\n"
+#~ "\n"
+#~ "\n"
+#~ "If you do have a TV card but DrakX has neither detected it (no bttv nor "
+#~ "saa7134\n"
+#~ "module in \"/etc/modules\") nor installed xawtv, please send the\n"
+#~ "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+#~ "with subject \"undetected TV card\".\n"
+#~ "\n"
+#~ "\n"
+#~ "You can install it by typing \"urpmi xawtv\" as root, in a console."
+#~ msgstr ""
+#~ "XawTV nije instaliran!\n"
+#~ "\n"
+#~ "\n"
+#~ "Ako imate TV karticu ali je DrakX nije prepoznao (ni bttv ni saa7134 "
+#~ "modul se ne\n"
+#~ "nalaze u \"/etc/modules\") niti je instalirao XawTV, molim pošaljite "
+#~ "rezultate naredbe\n"
+#~ "\"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\" sa naslovom "
+#~ "\"undetected\n"
+#~ "TV card\".\n"
+#~ "\n"
+#~ "\n"
+#~ "Možete instalirati XawTV kucajući \"urpmi xawtv\" na konzoli kao root."
+
 #~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
 #~ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
 
@@ -20879,9 +20991,6 @@ msgstr "Skup alata za čitanje i slanje pošte i news-a i pregledanje weba"
 #~ msgid "Please enter the host name or IP."
 #~ msgstr "Molimo unesite ime računara ili IP."
 
-#~ msgid "Please enter your login"
-#~ msgstr "Molimo unesite vaš login"
-
 #~ msgid ""
 #~ " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s"
 #~ "\\@epita.fr>"