merged with the manual help

1 files changed, 396 insertions, 337 deletions

diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
index 8795c4b4e..c3666cf85 100644
--- a/perl-install/share/po/DrakX.pot
+++ b/perl-install/share/po/DrakX.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2002-02-07 21:57+0100\n"
+"POT-Creation-Date: 2002-02-09 14:15+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -212,7 +212,7 @@ msgstr ""
 msgid "XFree86 server: %s"
 msgstr ""
 
-#: ../../Xconfigurator.pm_.c:837 ../../printerdrake.pm_.c:2266
+#: ../../Xconfigurator.pm_.c:837 ../../printerdrake.pm_.c:2377
 #: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
 msgid "Expert Mode"
 msgstr ""
@@ -322,7 +322,7 @@ msgstr ""
 msgid "Test again"
 msgstr ""
 
-#: ../../Xconfigurator.pm_.c:1511 ../../printerdrake.pm_.c:2269
+#: ../../Xconfigurator.pm_.c:1511 ../../printerdrake.pm_.c:2380
 #: ../../standalone/logdrake_.c:217
 msgid "Quit"
 msgstr ""
@@ -541,7 +541,7 @@ msgstr ""
 
 #: ../../any.pm_.c:172 ../../any.pm_.c:774
 #: ../../install_steps_interactive.pm_.c:1092 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:663 ../../printerdrake.pm_.c:739
+#: ../../printerdrake.pm_.c:717 ../../printerdrake.pm_.c:793
 #: ../../standalone/draknet_.c:624
 msgid "Password"
 msgstr ""
@@ -737,12 +737,12 @@ msgid "Do you have any %s interfaces?"
 msgstr ""
 
 #: ../../any.pm_.c:639 ../../any.pm_.c:810 ../../interactive.pm_.c:123
-#: ../../my_gtk.pm_.c:999
+#: ../../my_gtk.pm_.c:1001
 msgid "No"
 msgstr ""
 
 #: ../../any.pm_.c:639 ../../any.pm_.c:809 ../../interactive.pm_.c:123
-#: ../../my_gtk.pm_.c:999
+#: ../../my_gtk.pm_.c:1001
 msgid "Yes"
 msgstr ""
 
@@ -869,8 +869,8 @@ msgstr ""
 msgid "Real name"
 msgstr ""
 
-#: ../../any.pm_.c:773 ../../printerdrake.pm_.c:662
-#: ../../printerdrake.pm_.c:738
+#: ../../any.pm_.c:773 ../../printerdrake.pm_.c:716
+#: ../../printerdrake.pm_.c:792
 msgid "User name"
 msgstr ""
 
@@ -1172,9 +1172,9 @@ msgstr ""
 #: ../../bootlook.pm_.c:160 ../../install_steps_gtk.pm_.c:463
 #: ../../install_steps_gtk.pm_.c:521 ../../interactive.pm_.c:133
 #: ../../interactive.pm_.c:307 ../../interactive.pm_.c:339
-#: ../../interactive_stdio.pm_.c:141 ../../my_gtk.pm_.c:668
-#: ../../my_gtk.pm_.c:671 ../../my_gtk.pm_.c:1000
-#: ../../printerdrake.pm_.c:1484 ../../standalone/drakautoinst_.c:204
+#: ../../interactive_stdio.pm_.c:141 ../../my_gtk.pm_.c:670
+#: ../../my_gtk.pm_.c:673 ../../my_gtk.pm_.c:1002
+#: ../../printerdrake.pm_.c:1540 ../../standalone/drakautoinst_.c:204
 #: ../../standalone/drakbackup_.c:2251 ../../standalone/drakbackup_.c:2276
 #: ../../standalone/drakbackup_.c:2297 ../../standalone/drakbackup_.c:2318
 #: ../../standalone/drakbackup_.c:2336 ../../standalone/drakbackup_.c:2384
@@ -2208,12 +2208,16 @@ msgid ""
 "to have a graphical workstation!\n"
 "\n"
 "Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you do not select any group when installing (and\n"
-"not upgrading), a dialog will popup asking you to choose the nature of\n"
-"minimal install. This can be \"Base system only\" for the smallest install\n"
-"possible, \"No X\" for a bit larger install but without X11 or \"With X\"\n"
-"for the the largest minimal install including X11. (this para *MUST* be\n"
-"reviewed and splitted)\n"
+"text about that group. If you do not select any group when performing a\n"
+"regular installation (by opposition to an upgrade), a dialog will popup\n"
+"proposing different kind of minimal installations:\n"
+"\n"
+" * Will install the strict minimum necessary to get a working Linux system,\n"
+"in command line only.\n"
+"\n"
+" * Installs the base system plus basic utilities\n"
+"\n"
+" * Install the fewer packages possible for having a graphical desktop\n"
 "\n"
 "You can check the \"Individual package selection\" box, which is useful if\n"
 "you are familiar with the packages being offered or if you want to have\n"
@@ -2224,7 +2228,7 @@ msgid ""
 "updating an existing system."
 msgstr ""
 
-#: ../../help.pm_.c:120
+#: ../../help.pm_.c:124
 msgid ""
 "Finally, depending on your choice of whether or not to select individual\n"
 "packages, you will be presented a tree containing all packages classified\n"
@@ -2262,7 +2266,7 @@ msgid ""
 "a floppy."
 msgstr ""
 
-#: ../../help.pm_.c:156
+#: ../../help.pm_.c:160
 msgid ""
 "If you wish to connect your computer to the Internet or to a local network,\n"
 "please choose the correct option. Please turn on your device before\n"
@@ -2285,7 +2289,7 @@ msgid ""
 "have finished configuring your network connection, click \"Cancel\"."
 msgstr ""
 
-#: ../../help.pm_.c:177
+#: ../../help.pm_.c:181
 msgid ""
 "You may now choose which services you wish to start at boot time.\n"
 "\n"
@@ -2303,13 +2307,13 @@ msgid ""
 "enabled on a server. In general, select only the services you really need."
 msgstr ""
 
-#: ../../help.pm_.c:193
+#: ../../help.pm_.c:197
 msgid ""
 "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
 "local time according to the time zone you selected."
 msgstr ""
 
-#: ../../help.pm_.c:197
+#: ../../help.pm_.c:201
 msgid ""
 "X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
 "on which all the graphics environments (KDE, Gnome, AfterStep,\n"
@@ -2331,7 +2335,7 @@ msgid ""
 "seconds, restoring the screen."
 msgstr ""
 
-#: ../../help.pm_.c:217
+#: ../../help.pm_.c:221
 msgid ""
 "The first time you try the X configuration, you may not be very satisfied\n"
 "with its display (screen is too small, shifted left or right...). Hence,\n"
@@ -2345,7 +2349,7 @@ msgid ""
 "with any modern graphics card. Then choose \"Test again\" to be sure."
 msgstr ""
 
-#: ../../help.pm_.c:229
+#: ../../help.pm_.c:233
 msgid ""
 "Finally, you will be asked whether you want to see the graphical interface\n"
 "at boot. Note this question will be asked even if you chose not to test the\n"
@@ -2354,7 +2358,7 @@ msgid ""
 "configured."
 msgstr ""
 
-#: ../../help.pm_.c:236
+#: ../../help.pm_.c:240
 msgid ""
 "The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
 "booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
@@ -2382,7 +2386,7 @@ msgid ""
 "the whole disk."
 msgstr ""
 
-#: ../../help.pm_.c:260
+#: ../../help.pm_.c:264
 msgid ""
 "At this point you need to choose where on your hard drive to install your\n"
 "Mandrake Linux operating system. If your hard drive is empty or if an\n"
@@ -2449,7 +2453,7 @@ msgid ""
 "know what you are doing."
 msgstr ""
 
-#: ../../help.pm_.c:324
+#: ../../help.pm_.c:328
 msgid ""
 "There you are. Installation is now complete and your GNU/Linux system is\n"
 "ready to use. Just click \"OK\" to reboot the system. You can start\n"
@@ -2482,7 +2486,7 @@ msgid ""
 "\"mformat a:\")"
 msgstr ""
 
-#: ../../help.pm_.c:355
+#: ../../help.pm_.c:359
 msgid ""
 "Any partitions that have been newly defined must be formatted for use\n"
 "(formatting means creating a file system).\n"
@@ -2510,7 +2514,7 @@ msgid ""
 "for bad blocks on the disc."
 msgstr ""
 
-#: ../../help.pm_.c:381
+#: ../../help.pm_.c:385
 msgid ""
 "Your new Mandrake Linux operating system is currently being installed.\n"
 "Depending on the number of packages you will be installing and the speed of\n"
@@ -2520,7 +2524,7 @@ msgid ""
 "Please be patient."
 msgstr ""
 
-#: ../../help.pm_.c:389
+#: ../../help.pm_.c:393
 msgid ""
 "You may choose to upload updated packages that have been released after the\n"
 "distribution has been made available. You will get security fixes or bug\n"
@@ -2534,7 +2538,7 @@ msgid ""
 "help section, let us (DrakX team developer) known)."
 msgstr ""
 
-#: ../../help.pm_.c:401
+#: ../../help.pm_.c:405
 msgid ""
 "Before continuing you should read carefully the terms of the license. It\n"
 "covers the whole Mandrake Linux distribution, and if you do not agree with\n"
@@ -2543,7 +2547,7 @@ msgid ""
 "\"Accept\" button."
 msgstr ""
 
-#: ../../help.pm_.c:408
+#: ../../help.pm_.c:412
 msgid ""
 "At this point, it is time to choose the security level desired for the\n"
 "machine. As a rule of thumb, the more exposed the machine is, and the more\n"
@@ -2555,7 +2559,7 @@ msgid ""
 "If you do not know what to choose, keep the default option."
 msgstr ""
 
-#: ../../help.pm_.c:418
+#: ../../help.pm_.c:422
 msgid ""
 "At this point, you need to choose what partition(s) will be used for the\n"
 "installation of your Mandrake Linux system. If partitions have been already\n"
@@ -2617,7 +2621,7 @@ msgid ""
 "emergency boot situations."
 msgstr ""
 
-#: ../../help.pm_.c:477
+#: ../../help.pm_.c:481
 msgid ""
 "More than one Microsoft Windows partition has been detected on your hard\n"
 "drive. Please choose the one you want to resize in order to install your\n"
@@ -2650,19 +2654,26 @@ msgid ""
 "disk or partition is called \"C:\")."
 msgstr ""
 
-#: ../../help.pm_.c:508
+#: ../../help.pm_.c:512
 msgid "Please be patient. This operation can take several minutes."
 msgstr ""
 
-#: ../../help.pm_.c:511
+#: ../../help.pm_.c:515
 msgid ""
 "DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
 "installation or if you want to have greater control (\"Expert\"). You also\n"
 "have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system. Select \"Upgrade packages only\" if you are upgrading the\n"
-"packages of a previous distribution without any other modification.\n"
+"Mandrake Linux system:\n"
+"\n"
+" * completely wipes out the old system;\n"
+"\n"
+" *\n"
+"\n"
+" *\n"
+"\n"
+"On the other hand, \"Upgrade\" allows you to upgrade an existing system.\n"
+"Finally, Select \"Upgrade packages only\" if you wish to upgrade the\n"
+"packages of a previous installation, without any other modification.\n"
 "\n"
 "Please choose \"Install\" if there are no previous version of Mandrake\n"
 "Linux installed or if you wish to boot between various operating systems.\n"
@@ -2685,7 +2696,7 @@ msgid ""
 "this unless you know what you are doing."
 msgstr ""
 
-#: ../../help.pm_.c:540
+#: ../../help.pm_.c:551
 msgid ""
 "Normally, DrakX selects the right keyboard for you (depending on the\n"
 "language you have chosen) and you will not even see this step. However, you\n"
@@ -2700,7 +2711,7 @@ msgid ""
 "supported keyboards."
 msgstr ""
 
-#: ../../help.pm_.c:553
+#: ../../help.pm_.c:564
 msgid ""
 "Please choose your preferred language for installation and system usage.\n"
 "\n"
@@ -2715,7 +2726,7 @@ msgid ""
 "additional locales click the \"OK\" button to continue."
 msgstr ""
 
-#: ../../help.pm_.c:566
+#: ../../help.pm_.c:577
 msgid ""
 "By default, DrakX assumes you have a two-button mouse and will set it up\n"
 "for third-button emulation. DrakX will automatically know whether it is a\n"
@@ -2730,13 +2741,13 @@ msgid ""
 "RETURN to \"Cancel\" and choose again."
 msgstr ""
 
-#: ../../help.pm_.c:579
+#: ../../help.pm_.c:590
 msgid ""
 "Please select the correct port. For example, the COM1 port under MS Windows\n"
 "is named ttyS0 under GNU/Linux."
 msgstr ""
 
-#: ../../help.pm_.c:583
+#: ../../help.pm_.c:594
 msgid ""
 "This is the most crucial decision point for the security of your GNU/Linux\n"
 "system: you have to enter the \"root\" password. \"root\" is the system\n"
@@ -2774,7 +2785,7 @@ msgid ""
 "want to choose \"Local files\" for authentication."
 msgstr ""
 
-#: ../../help.pm_.c:619
+#: ../../help.pm_.c:630
 msgid ""
 "LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
 "totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
@@ -2825,7 +2836,7 @@ msgid ""
 "on to the next installation step."
 msgstr ""
 
-#: ../../help.pm_.c:666
+#: ../../help.pm_.c:677
 msgid ""
 "LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
 "either GNU/Linux or any other operating system present on your computer.\n"
@@ -2838,7 +2849,7 @@ msgid ""
 "you will need a boot disk in order to boot those other operating systems!"
 msgstr ""
 
-#: ../../help.pm_.c:677
+#: ../../help.pm_.c:688
 msgid ""
 "You must indicate where you wish to place the information required to boot\n"
 "to GNU/Linux.\n"
@@ -2847,7 +2858,7 @@ msgid ""
 "(MBR)\"."
 msgstr ""
 
-#: ../../help.pm_.c:684
+#: ../../help.pm_.c:695
 msgid ""
 "Here we select a printing system for your computer to use. Other OSes may\n"
 "offer you one, but Mandrake offers three.\n"
@@ -2878,7 +2889,7 @@ msgid ""
 "networks."
 msgstr ""
 
-#: ../../help.pm_.c:712
+#: ../../help.pm_.c:723
 msgid ""
 "DrakX is now detecting any IDE devices present in your computer. It will\n"
 "also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
@@ -2907,7 +2918,7 @@ msgid ""
 "on your system)."
 msgstr ""
 
-#: ../../help.pm_.c:739
+#: ../../help.pm_.c:750
 msgid ""
 "You can add additional entries for yaboot, either for other operating\n"
 "systems, alternate kernels, or for an emergency boot image.\n"
@@ -2956,7 +2967,7 @@ msgid ""
 "selections."
 msgstr ""
 
-#: ../../help.pm_.c:784
+#: ../../help.pm_.c:795
 msgid ""
 "Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
 "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
@@ -2993,7 +3004,7 @@ msgid ""
 "Firmware Delay expires."
 msgstr ""
 
-#: ../../help.pm_.c:817
+#: ../../help.pm_.c:828
 msgid ""
 "Here are presented various parameters concerning your machine. Depending on\n"
 "your installed hardware, you may - or not, see the following entries:\n"
@@ -3025,14 +3036,14 @@ msgid ""
 "associated to it."
 msgstr ""
 
-#: ../../help.pm_.c:846
+#: ../../help.pm_.c:857
 msgid ""
 "Choose the hard drive you want to erase to install your new Mandrake Linux\n"
 "partition. Be careful, all data present on it will be lost and will not be\n"
 "recoverable!"
 msgstr ""
 
-#: ../../help.pm_.c:851
+#: ../../help.pm_.c:862
 msgid ""
 "Click on \"OK\" if you want to delete all data and partitions present on\n"
 "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
@@ -3098,7 +3109,7 @@ msgstr ""
 #: ../../interactive.pm_.c:307 ../../interactive.pm_.c:339
 #: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
 #: ../../interactive_stdio.pm_.c:141 ../../interactive_stdio.pm_.c:142
-#: ../../my_gtk.pm_.c:667 ../../my_gtk.pm_.c:1000 ../../my_gtk.pm_.c:1022
+#: ../../my_gtk.pm_.c:669 ../../my_gtk.pm_.c:1002 ../../my_gtk.pm_.c:1024
 #: ../../standalone/drakbackup_.c:2285 ../../standalone/drakbackup_.c:2356
 #: ../../standalone/drakbackup_.c:2372
 msgid "Ok"
@@ -4043,7 +4054,7 @@ msgid "NTP Server"
 msgstr ""
 
 #: ../../install_steps_interactive.pm_.c:1009
-#: ../../install_steps_interactive.pm_.c:1017 ../../printerdrake.pm_.c:102
+#: ../../install_steps_interactive.pm_.c:1017 ../../printerdrake.pm_.c:103
 msgid "Remote CUPS server"
 msgstr ""
 
@@ -4063,8 +4074,8 @@ msgstr ""
 msgid "Timezone"
 msgstr ""
 
-#: ../../install_steps_interactive.pm_.c:1027 ../../printerdrake.pm_.c:2090
-#: ../../printerdrake.pm_.c:2161
+#: ../../install_steps_interactive.pm_.c:1027 ../../printerdrake.pm_.c:2201
+#: ../../printerdrake.pm_.c:2272
 msgid "Printer"
 msgstr ""
 
@@ -4166,7 +4177,7 @@ msgstr ""
 msgid "Second floppy drive"
 msgstr ""
 
-#: ../../install_steps_interactive.pm_.c:1166 ../../printerdrake.pm_.c:1708
+#: ../../install_steps_interactive.pm_.c:1166 ../../printerdrake.pm_.c:1804
 msgid "Skip"
 msgstr ""
 
@@ -4328,19 +4339,19 @@ msgstr ""
 msgid "Please wait"
 msgstr ""
 
-#: ../../interactive_gtk.pm_.c:604 ../../services.pm_.c:222
+#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
 msgid "Info"
 msgstr ""
 
-#: ../../interactive_gtk.pm_.c:714
+#: ../../interactive_gtk.pm_.c:715
 msgid "Expand Tree"
 msgstr ""
 
-#: ../../interactive_gtk.pm_.c:715
+#: ../../interactive_gtk.pm_.c:716
 msgid "Collapse Tree"
 msgstr ""
 
-#: ../../interactive_gtk.pm_.c:716
+#: ../../interactive_gtk.pm_.c:717
 msgid "Toggle between flat and group sorted"
 msgstr ""
 
@@ -4824,23 +4835,23 @@ msgstr ""
 msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
 msgstr ""
 
-#: ../../my_gtk.pm_.c:632
+#: ../../my_gtk.pm_.c:634
 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 msgstr ""
 
-#: ../../my_gtk.pm_.c:667
+#: ../../my_gtk.pm_.c:669
 msgid "Finish"
 msgstr ""
 
-#: ../../my_gtk.pm_.c:667
+#: ../../my_gtk.pm_.c:669 ../../printerdrake.pm_.c:1542
 msgid "Next ->"
 msgstr ""
 
-#: ../../my_gtk.pm_.c:668
+#: ../../my_gtk.pm_.c:670 ../../printerdrake.pm_.c:1540
 msgid "<- Previous"
 msgstr ""
 
-#: ../../my_gtk.pm_.c:1000
+#: ../../my_gtk.pm_.c:1002
 msgid "Is this correct?"
 msgstr ""
 
@@ -5313,7 +5324,7 @@ msgstr ""
 msgid "Automatic IP"
 msgstr ""
 
-#: ../../network/network.pm_.c:327 ../../printerdrake.pm_.c:667
+#: ../../network/network.pm_.c:327 ../../printerdrake.pm_.c:721
 msgid "IP address should be in format 1.2.3.4"
 msgstr ""
 
@@ -5528,7 +5539,7 @@ msgstr ""
 msgid "PDQ - Print, Don't Queue"
 msgstr ""
 
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:847
+#: ../../printer.pm_.c:32 ../../printer.pm_.c:851
 msgid "CUPS"
 msgstr ""
 
@@ -5580,98 +5591,98 @@ msgstr ""
 msgid "Pipe job into a command"
 msgstr ""
 
-#: ../../printer.pm_.c:480 ../../printer.pm_.c:671 ../../printer.pm_.c:993
-#: ../../printerdrake.pm_.c:1555 ../../printerdrake.pm_.c:2448
+#: ../../printer.pm_.c:484 ../../printer.pm_.c:675 ../../printer.pm_.c:997
+#: ../../printerdrake.pm_.c:1618 ../../printerdrake.pm_.c:2598
 msgid "Unknown model"
 msgstr ""
 
-#: ../../printer.pm_.c:508
+#: ../../printer.pm_.c:512
 msgid "Local Printers"
 msgstr ""
 
-#: ../../printer.pm_.c:510 ../../printer.pm_.c:848
+#: ../../printer.pm_.c:514 ../../printer.pm_.c:852
 msgid "Remote Printers"
 msgstr ""
 
-#: ../../printer.pm_.c:517 ../../printerdrake.pm_.c:264
+#: ../../printer.pm_.c:521 ../../printerdrake.pm_.c:294
 #, c-format
 msgid " on parallel port \\/*%s"
 msgstr ""
 
-#: ../../printer.pm_.c:520 ../../printerdrake.pm_.c:266
+#: ../../printer.pm_.c:524 ../../printerdrake.pm_.c:296
 #, c-format
 msgid ", USB printer \\/*%s"
 msgstr ""
 
-#: ../../printer.pm_.c:525
+#: ../../printer.pm_.c:529
 #, c-format
 msgid ", multi-function device on parallel port \\/*%s"
 msgstr ""
 
-#: ../../printer.pm_.c:528
+#: ../../printer.pm_.c:532
 msgid ", multi-function device on USB"
 msgstr ""
 
-#: ../../printer.pm_.c:530
+#: ../../printer.pm_.c:534
 msgid ", multi-function device on HP JetDirect"
 msgstr ""
 
-#: ../../printer.pm_.c:532
+#: ../../printer.pm_.c:536
 msgid ", multi-function device"
 msgstr ""
 
-#: ../../printer.pm_.c:535
+#: ../../printer.pm_.c:539
 #, c-format
 msgid ", printing to %s"
 msgstr ""
 
-#: ../../printer.pm_.c:537
+#: ../../printer.pm_.c:541
 #, c-format
 msgid "on LPD server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../printer.pm_.c:539
+#: ../../printer.pm_.c:543
 #, c-format
 msgid ", TCP/IP host \"%s\", port %s"
 msgstr ""
 
-#: ../../printer.pm_.c:543
+#: ../../printer.pm_.c:547
 #, c-format
 msgid "on Windows server \"%s\", share \"%s\""
 msgstr ""
 
-#: ../../printer.pm_.c:547
+#: ../../printer.pm_.c:551
 #, c-format
 msgid "on Novell server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../printer.pm_.c:549
+#: ../../printer.pm_.c:553
 #, c-format
 msgid ", using command %s"
 msgstr ""
 
-#: ../../printer.pm_.c:668 ../../printerdrake.pm_.c:1047
+#: ../../printer.pm_.c:672 ../../printerdrake.pm_.c:1102
 msgid "Raw printer (No driver)"
 msgstr ""
 
-#: ../../printer.pm_.c:817
+#: ../../printer.pm_.c:821
 #, c-format
 msgid "(on %s)"
 msgstr ""
 
-#: ../../printer.pm_.c:819
+#: ../../printer.pm_.c:823
 msgid "(on this machine)"
 msgstr ""
 
-#: ../../printer.pm_.c:844
+#: ../../printer.pm_.c:848
 #, c-format
 msgid "On CUPS server \"%s\""
 msgstr ""
 
-#: ../../printer.pm_.c:850 ../../printerdrake.pm_.c:2198
-#: ../../printerdrake.pm_.c:2209 ../../printerdrake.pm_.c:2385
-#: ../../printerdrake.pm_.c:2416 ../../printerdrake.pm_.c:2564
-#: ../../printerdrake.pm_.c:2566
+#: ../../printer.pm_.c:854 ../../printerdrake.pm_.c:2309
+#: ../../printerdrake.pm_.c:2320 ../../printerdrake.pm_.c:2530
+#: ../../printerdrake.pm_.c:2566 ../../printerdrake.pm_.c:2714
+#: ../../printerdrake.pm_.c:2716
 msgid " (Default)"
 msgstr ""
 
@@ -5690,16 +5701,16 @@ msgid ""
 "printers will be automatically detected."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:82 ../../printerdrake.pm_.c:86
-#: ../../printerdrake.pm_.c:87 ../../printerdrake.pm_.c:141
+#: ../../printerdrake.pm_.c:83 ../../printerdrake.pm_.c:87
+#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:142
 msgid "None"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:83 ../../printerdrake.pm_.c:142
+#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:143
 msgid "Choose a default printer!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:103
+#: ../../printerdrake.pm_.c:104
 msgid ""
 "With remote CUPS servers, you do not have to configure any printer here; "
 "CUPS servers inform your machine automatically about their printers. All "
@@ -5713,7 +5724,7 @@ msgid ""
 "blank."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:104
+#: ../../printerdrake.pm_.c:105
 msgid ""
 "\n"
 "Normally, CUPS is automatically configured according to your network "
@@ -5723,57 +5734,75 @@ msgid ""
 "forget to restart CUPS afterwards (command: \"service cups restart\")."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:106 ../../printerdrake.pm_.c:1625
-#: ../../printerdrake.pm_.c:1629 ../../printerdrake.pm_.c:1630
-#: ../../printerdrake.pm_.c:1631 ../../printerdrake.pm_.c:2435
+#: ../../printerdrake.pm_.c:107 ../../printerdrake.pm_.c:1694
+#: ../../printerdrake.pm_.c:1700 ../../printerdrake.pm_.c:1701
+#: ../../printerdrake.pm_.c:1702 ../../printerdrake.pm_.c:2585
 #: ../../standalone/drakbackup_.c:753 ../../standalone/drakbackup_.c:2442
 #: ../../standalone/drakfont_.c:573 ../../standalone/drakfont_.c:763
 msgid "Close"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:107
+#: ../../printerdrake.pm_.c:108
 msgid "Apply/Re-read printers"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:111
+#: ../../printerdrake.pm_.c:112
 msgid "The IP address should look like 192.168.1.20"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:116 ../../printerdrake.pm_.c:795
+#: ../../printerdrake.pm_.c:117 ../../printerdrake.pm_.c:849
 msgid "The port number should be an integer!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:123 ../../printerdrake.pm_.c:2525
+#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:2675
 msgid "Default printer"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:128
+#: ../../printerdrake.pm_.c:129
 msgid "CUPS server IP"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:129 ../../printerdrake.pm_.c:788
+#: ../../printerdrake.pm_.c:130 ../../printerdrake.pm_.c:842
 msgid "Port"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:131
+#: ../../printerdrake.pm_.c:132
 msgid "Automatic CUPS configuration"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:198 ../../standalone/scannerdrake_.c:42
+#: ../../printerdrake.pm_.c:199 ../../standalone/scannerdrake_.c:42
 msgid "Detecting devices ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:198 ../../standalone/scannerdrake_.c:42
+#: ../../printerdrake.pm_.c:199 ../../standalone/scannerdrake_.c:42
 msgid "Test ports"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:215 ../../printerdrake.pm_.c:232
-#: ../../printerdrake.pm_.c:388 ../../printerdrake.pm_.c:403
-#: ../../printerdrake.pm_.c:408 ../../printerdrake.pm_.c:412
+#: ../../printerdrake.pm_.c:221 ../../printerdrake.pm_.c:2353
+#: ../../printerdrake.pm_.c:2457
+msgid "Add a new printer"
+msgstr ""
+
+#: ../../printerdrake.pm_.c:222
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
+msgstr ""
+
+#: ../../printerdrake.pm_.c:230 ../../printerdrake.pm_.c:257
+#: ../../printerdrake.pm_.c:421 ../../printerdrake.pm_.c:436
+#: ../../printerdrake.pm_.c:443 ../../printerdrake.pm_.c:502
 msgid "Local Printer"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:216
+#: ../../printerdrake.pm_.c:231
 msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
@@ -5785,14 +5814,17 @@ msgid ""
 "on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
 "set up your printer(s) now.\n"
 "\n"
-"Note that some computers can crash during the printer auto-detection, use "
-"the \"Expert Mode\" of printerdrake to do a printer installation without "
-"auto-detection. You also need the \"Expert Mode\" when you want to set up "
-"printing on a remote printer when printerdrake does not list it "
-"automatically."
+"Note that some computers can crash during the printer auto-detection, turn "
+"off \"Auto-detect printers\" to do a printer installation without auto-"
+"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
+"printing on a remote printer if printerdrake does not list it automatically."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:233
+#: ../../printerdrake.pm_.c:240
+msgid "Auto-detect printers"
+msgstr ""
+
+#: ../../printerdrake.pm_.c:258
 msgid ""
 "\n"
 "Congratulations, your printer is now installed and configured!\n"
@@ -5806,41 +5838,38 @@ msgid ""
 "Center."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:247
+#: ../../printerdrake.pm_.c:276
 msgid "Auto-Detection of Printers"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:248
+#: ../../printerdrake.pm_.c:277
 msgid ""
 "Printerdrake is able to auto-detect your locally connected parallel and USB "
 "printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND EVEN CORRUPT YOUR FILE SYSTEMS! So do it ON YOUR OWN "
-"RISK!\n"
+"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
+"YOUR OWN RISK!\n"
 "\n"
-"For local printers auto-detection is not really necessary, because they are "
-"external devices where you can easily see on their labels which models you "
-"have, but if you really want to auto-detect them, connect them and turn them "
-"on now and click \"Yes\", otherwise click \"No\"."
+"Do you really want to get your printers auto-detected?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:272
+#: ../../printerdrake.pm_.c:302
 #, c-format
 msgid "Detected %s"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:276 ../../printerdrake.pm_.c:303
-#: ../../printerdrake.pm_.c:319
+#: ../../printerdrake.pm_.c:306 ../../printerdrake.pm_.c:333
+#: ../../printerdrake.pm_.c:349
 #, c-format
 msgid "Printer on parallel port \\/*%s"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:278 ../../printerdrake.pm_.c:305
-#: ../../printerdrake.pm_.c:324
+#: ../../printerdrake.pm_.c:308 ../../printerdrake.pm_.c:335
+#: ../../printerdrake.pm_.c:354
 #, c-format
 msgid "USB printer \\/*%s"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:389
+#: ../../printerdrake.pm_.c:422
 msgid ""
 "No local printer found! To manually install a printer enter a device name/"
 "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
@@ -5848,130 +5877,128 @@ msgid ""
 "printer: /dev/usb/lp1, ...)."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:393
+#: ../../printerdrake.pm_.c:426
 msgid "You must enter a device or file name!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:403
+#: ../../printerdrake.pm_.c:436
 msgid "No local printer found!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:409
-#, c-format
-msgid "Detected %s, do you want to set it up?"
+#: ../../printerdrake.pm_.c:447
+msgid ""
+"The following printer was auto-detected, if it is not the one you want to "
+"configure, enter a device name/file name in the input line"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:416 ../../printerdrake.pm_.c:419
-msgid "Here is a list of all auto-detected printers. "
+#: ../../printerdrake.pm_.c:448
+msgid ""
+"Here is a list of all auto-detected printers. Please choose the printer you "
+"want to set up or enter a device name/file name in the input line"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:417
+#: ../../printerdrake.pm_.c:450
 msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+"The following printer was auto-detected. The configuration of the printer "
+"will work fully automatically. If your printer was not correctly detected or "
+"if you prefer a customized printer configuration, turn on \"Manual "
+"configuration\"."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:420
-msgid "Please choose the printer you want to set up."
+#: ../../printerdrake.pm_.c:451
+msgid ""
+"Here is a list of all auto-detected printers. Please choose the printer you "
+"want to set up. The configuration of the printer will work fully "
+"automatically. If your printer was not correctly detected or if you prefer a "
+"customized printer configuration, turn on \"Manual configuration\"."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:422
+#: ../../printerdrake.pm_.c:453
 msgid ""
 "Please choose the port where your printer is connected to or enter a device "
 "name/file name in the input line"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:423
+#: ../../printerdrake.pm_.c:454
 msgid "Please choose the port where your printer is connected to."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:425
+#: ../../printerdrake.pm_.c:456
 msgid ""
 " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
 "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:430
+#: ../../printerdrake.pm_.c:461
 msgid "You must choose/enter a printer/device!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:469
-msgid "Installing HPOJ package..."
+#: ../../printerdrake.pm_.c:481
+msgid "Manual configuration"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:487
-msgid "Installing SANE package..."
+#: ../../printerdrake.pm_.c:503
+msgid ""
+"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart "
+"LaserJet 1100/1200/1220/3200 with scanner)?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:493 ../../printerdrake.pm_.c:499
-msgid "Scanning on your HP multi-function device"
+#: ../../printerdrake.pm_.c:517
+msgid "Installing HPOJ package..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:494
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"Do not use \"scannerdrake\" for this device!"
+#: ../../printerdrake.pm_.c:522
+msgid "Checking device and configuring HPOJ ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:500
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" on your system. If you have an HP LaserJet 1100 or 1200 "
-"you can only scan when you have the scanner option installed.\n"
-"Do not use \"scannerdrake\" for this device!"
+#: ../../printerdrake.pm_.c:540
+msgid "Installing SANE package..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:515
+#: ../../printerdrake.pm_.c:552
+msgid "Scanning on your HP multi-function device"
+msgstr ""
+
+#: ../../printerdrake.pm_.c:569
 msgid "Making printer port available for CUPS ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:525 ../../printerdrake.pm_.c:950
-#: ../../printerdrake.pm_.c:1043
+#: ../../printerdrake.pm_.c:579 ../../printerdrake.pm_.c:1005
+#: ../../printerdrake.pm_.c:1098
 msgid "Reading printer database ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:579
+#: ../../printerdrake.pm_.c:633
 msgid "Remote lpd Printer Options"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:580
+#: ../../printerdrake.pm_.c:634
 msgid ""
 "To use a remote lpd printer, you need to supply the hostname of the printer "
 "server and the printer name on that server."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:581
+#: ../../printerdrake.pm_.c:635
 msgid "Remote host name"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:582
+#: ../../printerdrake.pm_.c:636
 msgid "Remote printer name"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:585
+#: ../../printerdrake.pm_.c:639
 msgid "Remote host name missing!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:589
+#: ../../printerdrake.pm_.c:643
 msgid "Remote printer name missing!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:657
+#: ../../printerdrake.pm_.c:711
 msgid "SMB (Windows 9x/NT) Printer Options"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:658
+#: ../../printerdrake.pm_.c:712
 msgid ""
 "To print to a SMB printer, you need to provide the SMB host name (Note! It "
 "may be different from its TCP/IP hostname!) and possibly the IP address of "
@@ -5979,35 +6006,35 @@ msgid ""
 "access and any applicable user name, password, and workgroup information."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:659
+#: ../../printerdrake.pm_.c:713
 msgid "SMB server host"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:660
+#: ../../printerdrake.pm_.c:714
 msgid "SMB server IP"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:661
+#: ../../printerdrake.pm_.c:715
 msgid "Share name"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:664
+#: ../../printerdrake.pm_.c:718
 msgid "Workgroup"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:671
+#: ../../printerdrake.pm_.c:725
 msgid "Either the server name or the server's IP must be given!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:675
+#: ../../printerdrake.pm_.c:729
 msgid "Samba share name missing!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:734
+#: ../../printerdrake.pm_.c:788
 msgid "NetWare Printer Options"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:735
+#: ../../printerdrake.pm_.c:789
 msgid ""
 "To print on a NetWare printer, you need to provide the NetWare print server "
 "name (Note! it may be different from its TCP/IP hostname!) as well as the "
@@ -6015,27 +6042,27 @@ msgid ""
 "name and password."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:736
+#: ../../printerdrake.pm_.c:790
 msgid "Printer Server"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:737
+#: ../../printerdrake.pm_.c:791
 msgid "Print Queue Name"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:742
+#: ../../printerdrake.pm_.c:796
 msgid "NCP server name missing!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:746
+#: ../../printerdrake.pm_.c:800
 msgid "NCP queue name missing!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:785
+#: ../../printerdrake.pm_.c:839
 msgid "TCP/Socket Printer Options"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:786
+#: ../../printerdrake.pm_.c:840
 msgid ""
 "To print to a TCP or socket printer, you need to provide the host name of "
 "the printer and optionally the port number. On HP JetDirect servers the port "
@@ -6043,60 +6070,60 @@ msgid ""
 "hardware."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:787
+#: ../../printerdrake.pm_.c:841
 msgid "Printer host name"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:791
+#: ../../printerdrake.pm_.c:845
 msgid "Printer host name missing!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:820 ../../printerdrake.pm_.c:822
+#: ../../printerdrake.pm_.c:874 ../../printerdrake.pm_.c:876
 msgid "Printer Device URI"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:821
+#: ../../printerdrake.pm_.c:875
 msgid ""
 "You can specify directly the URI to access the printer. The URI must fulfill "
 "either the CUPS or the Foomatic specifications. Note that not all URI types "
 "are supported by all the spoolers."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:836
+#: ../../printerdrake.pm_.c:890
 msgid "A valid URI must be entered!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:936
+#: ../../printerdrake.pm_.c:991
 msgid ""
 "Every printer needs a name (for example \"printer\"). The Description and "
 "Location fields do not need to be filled in. They are comments for the users."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:937
+#: ../../printerdrake.pm_.c:992
 msgid "Name of printer"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:938
+#: ../../printerdrake.pm_.c:993
 msgid "Description"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:939
+#: ../../printerdrake.pm_.c:994
 msgid "Location"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:953
+#: ../../printerdrake.pm_.c:1008
 msgid "Preparing printer database ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1050
+#: ../../printerdrake.pm_.c:1105
 msgid "Printer model selection"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1051
+#: ../../printerdrake.pm_.c:1106
 msgid "Which printer model do you have?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1052
+#: ../../printerdrake.pm_.c:1107
 msgid ""
 "\n"
 "\n"
@@ -6105,11 +6132,11 @@ msgid ""
 "standing on a wrong model or on \"Raw printer\"."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1128
+#: ../../printerdrake.pm_.c:1183
 msgid "OKI winprinter configuration"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1129
+#: ../../printerdrake.pm_.c:1184
 msgid ""
 "You are configuring an OKI laser winprinter. These printers\n"
 "use a very special communication protocol and therefore they work only when "
@@ -6119,11 +6146,11 @@ msgid ""
 "not work. Your connection type setting will be ignored by the driver."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1172 ../../printerdrake.pm_.c:1199
+#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:1254
 msgid "Lexmark inkjet configuration"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1173
+#: ../../printerdrake.pm_.c:1228
 msgid ""
 "The inkjet printer drivers provided by Lexmark only support local printers, "
 "no printers on remote machines or print server boxes. Please connect your "
@@ -6131,7 +6158,7 @@ msgid ""
 "to."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1200
+#: ../../printerdrake.pm_.c:1255
 msgid ""
 "To be able to print with your Lexmark inkjet and this configuration, you "
 "need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
@@ -6144,7 +6171,7 @@ msgid ""
 "program."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1409
+#: ../../printerdrake.pm_.c:1464
 msgid ""
 "Printer default settings\n"
 "\n"
@@ -6154,33 +6181,33 @@ msgid ""
 "printout quality/resolution printing can get substantially slower."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1418
+#: ../../printerdrake.pm_.c:1473
 #, c-format
 msgid "Option %s must be an integer number!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1422
+#: ../../printerdrake.pm_.c:1477
 #, c-format
 msgid "Option %s must be a number!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1427
+#: ../../printerdrake.pm_.c:1482
 #, c-format
 msgid "Option %s out of range!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1464
+#: ../../printerdrake.pm_.c:1519
 #, c-format
 msgid ""
 "Do you want to set this printer (\"%s\")\n"
 "as the default printer?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1480
+#: ../../printerdrake.pm_.c:1536
 msgid "Test pages"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1481
+#: ../../printerdrake.pm_.c:1537
 msgid ""
 "Please select the test pages you want to print.\n"
 "Note: the photo test page can take a rather long time to get printed and on "
@@ -6188,35 +6215,39 @@ msgid ""
 "it is enough to print the standard test page."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1484
+#: ../../printerdrake.pm_.c:1541
 msgid "No test pages"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1485
+#: ../../printerdrake.pm_.c:1542
 msgid "Print"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1487
+#: ../../printerdrake.pm_.c:1544
 msgid "Standard test page"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1490
+#: ../../printerdrake.pm_.c:1547
 msgid "Alternative test page (Letter)"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1493
+#: ../../printerdrake.pm_.c:1550
 msgid "Alternative test page (A4)"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1495
+#: ../../printerdrake.pm_.c:1552
 msgid "Photo test page"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1501 ../../printerdrake.pm_.c:1632
+#: ../../printerdrake.pm_.c:1556
+msgid "Do not print any test page"
+msgstr ""
+
+#: ../../printerdrake.pm_.c:1564 ../../printerdrake.pm_.c:1703
 msgid "Printing test page(s)..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1526
+#: ../../printerdrake.pm_.c:1589
 #, c-format
 msgid ""
 "Test page(s) have been sent to the printer.\n"
@@ -6226,21 +6257,21 @@ msgid ""
 "\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1530
+#: ../../printerdrake.pm_.c:1593
 msgid ""
 "Test page(s) have been sent to the printer.\n"
 "It may take some time before the printer starts.\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1537
+#: ../../printerdrake.pm_.c:1600
 msgid "Did it work properly?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1557 ../../printerdrake.pm_.c:2450
+#: ../../printerdrake.pm_.c:1620 ../../printerdrake.pm_.c:2600
 msgid "Raw printer"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1568
+#: ../../printerdrake.pm_.c:1641
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) you can either use "
@@ -6249,15 +6280,15 @@ msgid ""
 "to modify the option settings easily.\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1570
+#: ../../printerdrake.pm_.c:1643
 msgid ""
 "These commands you can also use in the \"Printing command\" field of the "
 "printing dialogs of many applications, but here do not supply the file name "
 "because the file to print is provided by the application.\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1573 ../../printerdrake.pm_.c:1589
-#: ../../printerdrake.pm_.c:1601
+#: ../../printerdrake.pm_.c:1646 ../../printerdrake.pm_.c:1662
+#: ../../printerdrake.pm_.c:1672
 #, c-format
 msgid ""
 "\n"
@@ -6266,49 +6297,49 @@ msgid ""
 "line, e. g. \"%s <file>\". "
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1576 ../../printerdrake.pm_.c:1619
+#: ../../printerdrake.pm_.c:1649 ../../printerdrake.pm_.c:1688
+#, c-format
 msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s\n"
 "\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1579
+#: ../../printerdrake.pm_.c:1652
 msgid ""
-"Here is a list of the available options for the current printer:\n"
+"Here is a list of the available printing options for the current printer:\n"
 "\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1584 ../../printerdrake.pm_.c:1596
+#: ../../printerdrake.pm_.c:1657 ../../printerdrake.pm_.c:1667
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
 "<file>\".\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1586 ../../printerdrake.pm_.c:1598
-#: ../../printerdrake.pm_.c:1610
+#: ../../printerdrake.pm_.c:1659 ../../printerdrake.pm_.c:1669
+#: ../../printerdrake.pm_.c:1679
 msgid ""
 "This command you can also use in the \"Printing command\" field of the "
 "printing dialogs of many applications. But here do not supply the file name "
 "because the file to print is provided by the application.\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1591 ../../printerdrake.pm_.c:1603
+#: ../../printerdrake.pm_.c:1664 ../../printerdrake.pm_.c:1674
 msgid ""
 "To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
+"\"Print option list\" button."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1608
+#: ../../printerdrake.pm_.c:1677
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
 "<file>\" or \"%s <file>\".\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1612
+#: ../../printerdrake.pm_.c:1681
 msgid ""
 "You can also use the graphical interface \"xpdq\" for setting options and "
 "handling printing jobs.\n"
@@ -6318,7 +6349,7 @@ msgid ""
 "jams.\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1616
+#: ../../printerdrake.pm_.c:1685
 #, c-format
 msgid ""
 "\n"
@@ -6327,26 +6358,58 @@ msgid ""
 "line, e. g. \"%s <file>\".\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1627 ../../printerdrake.pm_.c:1637
+#: ../../printerdrake.pm_.c:1697 ../../printerdrake.pm_.c:1709
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr ""
+
+#: ../../printerdrake.pm_.c:1698 ../../printerdrake.pm_.c:1710
 #, c-format
 msgid "Printing on the printer \"%s\""
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1629
+#: ../../printerdrake.pm_.c:1700
 msgid "Print option list"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1654 ../../printerdrake.pm_.c:2046
-#: ../../printerdrake.pm_.c:2281 ../../standalone/printerdrake_.c:49
+#: ../../printerdrake.pm_.c:1722
+#, c-format
+msgid ""
+"Your HP multi-function device was configured automatically to be able to "
+"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
+"the scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
+"to get more information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+
+#: ../../printerdrake.pm_.c:1728
+#, c-format
+msgid ""
+"Your HP multi-function device was configured automatically to be able to "
+"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
+"Scanning via a graphical interface or from the GIMP is not supported yet for "
+"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
+"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
+"1200 you can only scan when you have the scanner option installed.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+
+#: ../../printerdrake.pm_.c:1750 ../../printerdrake.pm_.c:2157
+#: ../../printerdrake.pm_.c:2392 ../../standalone/printerdrake_.c:49
 msgid "Reading printer data ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1674 ../../printerdrake.pm_.c:1702
-#: ../../printerdrake.pm_.c:1737
+#: ../../printerdrake.pm_.c:1770 ../../printerdrake.pm_.c:1798
+#: ../../printerdrake.pm_.c:1833
 msgid "Transfer printer configuration"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1675
+#: ../../printerdrake.pm_.c:1771
 #, c-format
 msgid ""
 "You can copy the printer configuration which you have done for the spooler %"
@@ -6356,51 +6419,51 @@ msgid ""
 "Not all queues can be transferred due to the following reasons:\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1678
+#: ../../printerdrake.pm_.c:1774
 msgid ""
 "CUPS does not support printers on Novell servers or printers sending the "
 "data into a free-formed command.\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1680
+#: ../../printerdrake.pm_.c:1776
 msgid ""
 "PDQ only supports local printers, remote LPD printers, and Socket/TCP "
 "printers.\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1682
+#: ../../printerdrake.pm_.c:1778
 msgid "LPD and LPRng do not support IPP printers.\n"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1684
+#: ../../printerdrake.pm_.c:1780
 msgid ""
 "In addition, queues not created with this program or \"foomatic-configure\" "
 "cannot be transferred."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1685
+#: ../../printerdrake.pm_.c:1781
 msgid ""
 "\n"
 "Also printers configured with the PPD files provided by their manufacturers "
 "or with native CUPS drivers cannot be transferred."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1686
+#: ../../printerdrake.pm_.c:1782
 msgid ""
 "\n"
 "Mark the printers which you want to transfer and click \n"
 "\"Transfer\"."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1689
+#: ../../printerdrake.pm_.c:1785
 msgid "Do not transfer printers"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1707
+#: ../../printerdrake.pm_.c:1786 ../../printerdrake.pm_.c:1803
 msgid "Transfer"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1703
+#: ../../printerdrake.pm_.c:1799
 #, c-format
 msgid ""
 "A printer named \"%s\" already exists under %s. \n"
@@ -6408,56 +6471,56 @@ msgid ""
 "You can also type a new name or skip this printer."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1711
+#: ../../printerdrake.pm_.c:1807
 msgid "Name of printer should contain only letters, numbers and the underscore"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1716
+#: ../../printerdrake.pm_.c:1812
 #, c-format
 msgid ""
 "The printer \"%s\" already exists,\n"
 "do you really want to overwrite its configuration?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1724
+#: ../../printerdrake.pm_.c:1820
 msgid "New printer name"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1727
+#: ../../printerdrake.pm_.c:1823
 #, c-format
 msgid "Transferring %s ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1738
+#: ../../printerdrake.pm_.c:1834
 #, c-format
 msgid ""
 "You have transferred your former default printer (\"%s\"), Should it be also "
 "the default printer under the new printing system %s?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1747
+#: ../../printerdrake.pm_.c:1843
 msgid "Refreshing printer data ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1755 ../../printerdrake.pm_.c:1814
-#: ../../printerdrake.pm_.c:1826
+#: ../../printerdrake.pm_.c:1851 ../../printerdrake.pm_.c:1914
+#: ../../printerdrake.pm_.c:1926
 msgid "Configuration of a remote printer"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1756
+#: ../../printerdrake.pm_.c:1852
 msgid "Starting network ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1778 ../../printerdrake.pm_.c:1782
-#: ../../printerdrake.pm_.c:1784
+#: ../../printerdrake.pm_.c:1878 ../../printerdrake.pm_.c:1882
+#: ../../printerdrake.pm_.c:1884
 msgid "Configure the network now"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1779
+#: ../../printerdrake.pm_.c:1879
 msgid "Network functionality not configured"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1780
+#: ../../printerdrake.pm_.c:1880
 msgid ""
 "You are going to configure a remote printer. This needs working network "
 "access, but your network is not configured yet. If you go on without network "
@@ -6465,11 +6528,11 @@ msgid ""
 "configuring now. How do you want to proceed?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1783
+#: ../../printerdrake.pm_.c:1883
 msgid "Go on without configuring the network"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1816
+#: ../../printerdrake.pm_.c:1916
 msgid ""
 "The network configuration done during the installation cannot be started "
 "now. Please check whether the network gets accessable after booting your "
@@ -6479,31 +6542,31 @@ msgid ""
 "\"Printer\""
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1817
+#: ../../printerdrake.pm_.c:1917
 msgid ""
 "The network access was not running and could not be started. Please check "
 "your configuration and your hardware. Then try to configure your remote "
 "printer again."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1827
+#: ../../printerdrake.pm_.c:1927
 msgid "Restarting printing system ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1859
+#: ../../printerdrake.pm_.c:1965
 msgid "high"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1859
+#: ../../printerdrake.pm_.c:1965
 msgid "paranoid"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1860
+#: ../../printerdrake.pm_.c:1966
 #, c-format
 msgid "Installing a printing system in the %s security level"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1861
+#: ../../printerdrake.pm_.c:1967
 #, c-format
 msgid ""
 "You are about to install the printing system %s on a system running in the %"
@@ -6518,11 +6581,11 @@ msgid ""
 "Do you really want to configure printing on this machine?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1888
+#: ../../printerdrake.pm_.c:1999
 msgid "Starting the printing system at boot time"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1889
+#: ../../printerdrake.pm_.c:2000
 #, c-format
 msgid ""
 "The printing system (%s) will not be started automatically when the machine "
@@ -6536,145 +6599,141 @@ msgid ""
 "again?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1912 ../../printerdrake.pm_.c:1940
-#: ../../printerdrake.pm_.c:1970 ../../printerdrake.pm_.c:2003
-#: ../../printerdrake.pm_.c:2095
+#: ../../printerdrake.pm_.c:2023 ../../printerdrake.pm_.c:2051
+#: ../../printerdrake.pm_.c:2081 ../../printerdrake.pm_.c:2114
+#: ../../printerdrake.pm_.c:2206
 msgid "Checking installed software..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1944
+#: ../../printerdrake.pm_.c:2055
 msgid "Removing LPRng..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:1974
+#: ../../printerdrake.pm_.c:2085
 msgid "Removing LPD..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2032
+#: ../../printerdrake.pm_.c:2143
 msgid "Select Printer Spooler"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2033
+#: ../../printerdrake.pm_.c:2144
 msgid "Which printing system (spooler) do you want to use?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2064
+#: ../../printerdrake.pm_.c:2175
 #, c-format
 msgid "Configuring printer \"%s\" ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2123 ../../printerdrake.pm_.c:2155
-#: ../../printerdrake.pm_.c:2451 ../../printerdrake.pm_.c:2518
+#: ../../printerdrake.pm_.c:2234 ../../printerdrake.pm_.c:2266
+#: ../../printerdrake.pm_.c:2601 ../../printerdrake.pm_.c:2668
 msgid "Printer options"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2132
+#: ../../printerdrake.pm_.c:2243
 msgid "Preparing PrinterDrake ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2162
+#: ../../printerdrake.pm_.c:2273
 msgid "Would you like to configure printing?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2174
+#: ../../printerdrake.pm_.c:2285
 msgid "Printing system: "
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2222
+#: ../../printerdrake.pm_.c:2333
 msgid "Printerdrake"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2225
+#: ../../printerdrake.pm_.c:2336
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
 "its settings; to make it the default printer; or to view information about "
 "it."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2242 ../../printerdrake.pm_.c:2344
-msgid "Add a new printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2251
+#: ../../printerdrake.pm_.c:2362
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2260
+#: ../../printerdrake.pm_.c:2371
 msgid "Configure printing system"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2265 ../../standalone/draknet_.c:278
+#: ../../printerdrake.pm_.c:2376 ../../standalone/draknet_.c:278
 msgid "Normal Mode"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2362 ../../printerdrake.pm_.c:2392
-#: ../../printerdrake.pm_.c:2581
+#: ../../printerdrake.pm_.c:2481 ../../printerdrake.pm_.c:2539
+#: ../../printerdrake.pm_.c:2731
 msgid "Do you want to configure another printer?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2430
+#: ../../printerdrake.pm_.c:2580
 msgid "Modify printer configuration"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2432
+#: ../../printerdrake.pm_.c:2582
 #, c-format
 msgid ""
 "Printer %s\n"
 "What do you want to modify on this printer?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2436
+#: ../../printerdrake.pm_.c:2586
 msgid "Do it!"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2440 ../../printerdrake.pm_.c:2492
+#: ../../printerdrake.pm_.c:2590 ../../printerdrake.pm_.c:2642
 msgid "Printer connection type"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2441 ../../printerdrake.pm_.c:2496
+#: ../../printerdrake.pm_.c:2591 ../../printerdrake.pm_.c:2646
 msgid "Printer name, description, location"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2443 ../../printerdrake.pm_.c:2511
+#: ../../printerdrake.pm_.c:2593 ../../printerdrake.pm_.c:2661
 msgid "Printer manufacturer, model, driver"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2444 ../../printerdrake.pm_.c:2512
+#: ../../printerdrake.pm_.c:2594 ../../printerdrake.pm_.c:2662
 msgid "Printer manufacturer, model"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2453 ../../printerdrake.pm_.c:2522
+#: ../../printerdrake.pm_.c:2603 ../../printerdrake.pm_.c:2672
 msgid "Set this printer as the default"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2454 ../../printerdrake.pm_.c:2527
+#: ../../printerdrake.pm_.c:2604 ../../printerdrake.pm_.c:2677
 msgid "Print test pages"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2455 ../../printerdrake.pm_.c:2529
-msgid "Know how to print with this printer"
+#: ../../printerdrake.pm_.c:2605 ../../printerdrake.pm_.c:2679
+msgid "Know how to use this printer"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2457 ../../printerdrake.pm_.c:2531
+#: ../../printerdrake.pm_.c:2607 ../../printerdrake.pm_.c:2681
 msgid "Remove printer"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2501
+#: ../../printerdrake.pm_.c:2651
 #, c-format
 msgid "Removing old printer \"%s\" ..."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2526
+#: ../../printerdrake.pm_.c:2676
 #, c-format
 msgid "The printer \"%s\" is set as the default printer now."
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2533
+#: ../../printerdrake.pm_.c:2683
 #, c-format
 msgid "Do you really want to remove the printer \"%s\"?"
 msgstr ""
 
-#: ../../printerdrake.pm_.c:2535
+#: ../../printerdrake.pm_.c:2685
 #, c-format
 msgid "Removing printer \"%s\" ..."
 msgstr ""