summaryrefslogtreecommitdiffstats
path: root/perl-install/printer/detect.pm
diff options
context:
space:
mode:
authorPascal Rigaux <pixel@mandriva.com>2007-04-25 12:26:16 +0000
committerPascal Rigaux <pixel@mandriva.com>2007-04-25 12:26:16 +0000
commit126777bc019a54afb4ec51299f2cf9d2841698aa (patch)
tree97f76e571902ead55ba138f1156a4b4f00b9b779 /perl-install/printer/detect.pm
parentf1f67448efc714873378dfeb8279fae68054a90a (diff)
downloaddrakx-backup-do-not-use-126777bc019a54afb4ec51299f2cf9d2841698aa.tar
drakx-backup-do-not-use-126777bc019a54afb4ec51299f2cf9d2841698aa.tar.gz
drakx-backup-do-not-use-126777bc019a54afb4ec51299f2cf9d2841698aa.tar.bz2
drakx-backup-do-not-use-126777bc019a54afb4ec51299f2cf9d2841698aa.tar.xz
drakx-backup-do-not-use-126777bc019a54afb4ec51299f2cf9d2841698aa.zip
re-sync after the big svn loss
Diffstat (limited to 'perl-install/printer/detect.pm')
-rw-r--r--perl-install/printer/detect.pm637
1 files changed, 0 insertions, 637 deletions
diff --git a/perl-install/printer/detect.pm b/perl-install/printer/detect.pm
deleted file mode 100644
index d02e89ac3..000000000
--- a/perl-install/printer/detect.pm
+++ /dev/null
@@ -1,637 +0,0 @@
-package printer::detect;
-
-use strict;
-use common;
-use modules;
-use detect_devices;
-use printer::data;
-
-sub local_detect() {
- modules::any_conf->read->get_probeall("usb-interface") and eval { modules::load($usbprintermodule) };
- # Reload parallel port modules only when we were not called by
- # automatic setup of print queues, to avoid recursive calls
- if ($::autoqueue) {
- whatUsbport();
- } else {
- eval { modules::unload(qw(lp parport_pc ppdev parport)) }; #- on kernel 2.4 parport has to be unloaded to probe again
- eval { modules::load(qw(ppdev parport_pc lp)) }; #- take care as not available on 2.4 kernel (silent error).
- whatPrinter();
- }
-}
-
-sub net_detect { whatNetPrinter(1, 0, @_) }
-
-sub net_smb_detect { whatNetPrinter(0, 1, @_) }
-
-sub detect {
- local_detect(), whatNetPrinter(1, 1, @_);
-}
-
-
-#-CLASS:PRINTER;
-#-MODEL:HP LaserJet 1100;
-#-MANUFACTURER:Hewlett-Packard;
-#-DESCRIPTION:HP LaserJet 1100 Printer;
-#-COMMAND SET:MLC,PCL,PJL;
-sub whatPrinter() {
- my @res = (whatParport(), whatUsbport());
- grep { $_->{val}{CLASS} eq "PRINTER" } @res;
-}
-
-sub whatParport() {
- my @res;
- my $i = 0;
- foreach (sort { $a =~ /(\d+)/; my $m = $1; $b =~ /(\d+)/; my $n = $1; $m <=> $n } `ls -1d /proc/parport/[0-9]* /proc/sys/dev/parport/parport[0-9]* 2>/dev/null`) {
- chomp;
- my $elem = {};
- my $F;
- open $F, "$_/autoprobe" or next;
- {
- local $_;
- my $itemfound = 0;
- while (<$F>) {
- chomp;
- if (/(.*):(.*);/) { #-#
- $elem->{$1} = $2;
- $elem->{$1} =~ s/Hewlett[-\s_]Packard/HP/;
- $elem->{$1} =~ s/HEWLETT[-\s_]PACKARD/HP/;
- $itemfound = 1;
- # Add IEEE-1284 device ID string
- $elem->{IEEE1284} .= $_;
- }
- }
- # Some parallel printers miss the "CLASS" field
- $elem->{CLASS} = 'PRINTER'
- if $itemfound && !defined($elem->{CLASS});
- }
- push @res, { port => "/dev/lp$i", val => $elem };
- $i ++;
- }
- @res;
-}
-
-sub whatPrinterPort() {
- grep { detect_devices::tryWrite($_) } qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9);
-}
-
-sub whatUsbport() {
- # The printer manufacturer and model names obtained with the usb_probe()
- # function were very messy, once there was a lot of noise around the
- # manufacturers name ("Inc.", "SA", "International", ...) and second,
- # all Epson inkjets answered with the name "Epson Stylus Color 760" which
- # lead many newbies to install their Epson Stylus Photo XXX as an Epson
- # Stylus Color 760 ...
- #
- # This routine based on an ioctl request gives very clean and correct
- # manufacturer and model names, so that they are easily matched to the
- # printer entries in the Foomatic database
- my @res;
- foreach my $i (0..15) {
- my $port = "/dev/usb/lp$i";
- my $realport = devices::make($port);
- next if !$realport;
- next if ! -r $realport;
- foreach my $j (1..3) {
- open(my $PORT, $realport) or next;
- my $idstr = "";
- # Calculation of IOCTL function 0x84005001 (to get device ID
- # string):
- # len = 1024
- # IOCNR_GET_DEVICE_ID = 1
- # LPIOC_GET_DEVICE_ID(len) =
- # _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
- # _IOC(), _IOC_READ as defined in /usr/include/asm/ioctl.h
- # Use "eval" so that program does not stop when IOCTL fails
- eval {
- my $output = "\0" x 1024;
- ioctl($PORT, 0x84005001, $output);
- $idstr = $output;
- } or do {
- close $PORT;
- next;
- };
- close $PORT;
- # Cut resulting string to its real length
- my $length = ord(substr($idstr, 1, 1)) +
- (ord(substr($idstr, 0, 1)) << 8);
- $idstr = substr($idstr, 2, $length-2);
- # Remove non-printable characters
- $idstr =~ tr/[\x00-\x1f]/./;
- # If we do not find any item in the ID string, we try to read
- # it again
- my $itemfound = 0;
- # Extract the printer data from the ID string
- my ($manufacturer, $model, $serialnumber, $description, $commandset) =
- ("", "", "", "", "");
- my ($sku);
- if ($idstr =~ /CLS:([^;]+);/ || $idstr =~ /CLASS:([^;]+);/) {
- $itemfound = 1;
- }
- if ($idstr =~ /MFG:([^;]+);/ || $idstr =~ /MANUFACTURER:([^;]+);/) {
- $manufacturer = $1;
- $manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
- $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
- $itemfound = 1;
- }
- # For HP's multi-function devices the real model name is in the "SKU"
- # field. So use this field with priority for $model when it exists.
- if ($idstr =~ /MDL:([^;]+);/ || $idstr =~ /MODEL:([^;]+);/) {
- $model ||= $1;
- $itemfound = 1;
- }
- if ($idstr =~ /SKU:([^;]+);/) {
- $sku = $1;
- $itemfound = 1;
- }
- if ($idstr =~ /DES:([^;]+);/ || $idstr =~ /DESCRIPTION:([^;]+);/) {
- $description = $1;
- $description =~ s/Hewlett[-\s_]Packard/HP/;
- $description =~ s/HEWLETT[-\s_]PACKARD/HP/;
- $itemfound = 1;
- }
- if (($idstr =~ /SE*R*N:([^;]+);/) ||
- ($idstr =~ /SN:([^;]+);/)) {
- $serialnumber = $1;
- $itemfound = 1;
- }
- if ($idstr =~ /CMD:([^;]+);/ ||
- $idstr =~ /COMMAND\s*SET:([^;]+);/) {
- $commandset ||= $1;
- $itemfound = 1;
- }
- # Nothing found? Try again if not in the third attempt,
- # after the third attempt give up
- next if !$itemfound;
- # Was there a manufacturer and a model in the string?
- if ($manufacturer eq "" || $model eq "") {
- $manufacturer = "";
- $model = N("Unknown model");
- }
- # No description field? Make one out of manufacturer and model.
- if ($description eq "") {
- $description = "$manufacturer $model";
- }
- # Store this auto-detection result in the data structure
- push @res, { port => $port, val =>
- { CLASS => 'PRINTER',
- MODEL => $model,
- MANUFACTURER => $manufacturer,
- DESCRIPTION => $description,
- SERIALNUMBER => $serialnumber,
- 'COMMAND SET' => $commandset,
- SKU => $sku,
- IEEE1284 => $idstr,
- } };
- last;
- }
- }
- @res;
-}
-
-sub whatNetPrinter {
- my ($network, $smb, $timeout) = @_;
-
- my (@res);
-
- # Set timeouts for "nmap"
- $timeout = 4000 if !$timeout;
- my $irtimeout = $timeout / 2;
-
- # Which ports should be scanned?
- my @portstoscan;
- push @portstoscan, "139" if $smb;
- push @portstoscan, "4010", "4020", "4030", "5503", "9100-9104" if $network;
-
- return () if $#portstoscan < 0;
- my $portlist = join ",", @portstoscan;
-
- # Which hosts should be scanned?
- # (Applying nmap to a whole network is very time-consuming,
- # because nmap waits for a certain timeout period on non-existing
- # hosts, so we get a lists of existing hosts by pinging the
- # broadcast addresses for existing hosts and then scanning only
- # them, which is much faster)
- my @hostips = getIPsInLocalNetworks();
- return () if $#hostips < 0;
- my $hostlist = join " ", @hostips;
-
- # Scan network for printers, the timeout settings are there to avoid
- # delays caused by machines blocking their ports with a firewall
- local *F;
- open F, ($::testing ? "" : "chroot $::prefix/ ") .
- qq(/bin/sh -c "export LC_ALL=C; nmap -r -P0 --host_timeout $timeout --initial_rtt_timeout $irtimeout -p $portlist $hostlist" 2> /dev/null |)
- or return @res;
- my ($host, $ip, $port, $modelinfo, $namechecked) = ("", "", "", "", 0);
- while (my $line = <F>) {
- chomp $line;
-
- # head line of the report of a host with the ports in question open
- if (($line =~ m/^\s*Interesting\s+ports\s+on\s+(\S*)\s*\((\S+)\)\s*:\s*$/i) ||
- ($line =~ m/^\s*Interesting\s+ports\s+on\s+(\S+)\s*:\s*$/i)) {
- ($host, $ip) = ($1, $2);
- $ip = $host if !$ip;
- $host = $ip if $host eq "";
- $port = "";
- $namechecked = 0;
-
- undef $modelinfo;
-
- } elsif ($line =~ m!^\s*(\d+)/\S+\s+open\s+!i) {
- next if $ip eq "";
- $port = $1;
-
- # Check integrity of the host name (work around DNS problems
- # by using IP if host name is broken)
- if (!$namechecked && ($host ne $ip)) {
- $namechecked = 1; # Do not check more than once
- my $packedip = gethostbyname("$host");
- my ($a,$b,$c,$d) = unpack('C4',$packedip);
- my $ipfromdns = sprintf("%d.%d.%d.%d", $a, $b, $c, $d);
- $host = $ip if $ip ne $ipfromdns;
- }
- # Now we have all info for one printer
- # Store this auto-detection result in the data structure
-
- # Determine the protocol by the port number
-
- # SMB/Windows
- if ($port eq "139") {
- my @shares = getSMBPrinterShares($ip);
- foreach my $share (@shares) {
- push @res, { port => "smb://$host/$share->{name}",
- val => { CLASS => 'PRINTER',
- MODEL => N("Unknown model"),
- MANUFACTURER => "",
- DESCRIPTION => $share->{description},
- SERIALNUMBER => ""
- }
- };
- }
- } else {
- if (!defined($modelinfo)) {
- # SNMP request to auto-detect model
- $modelinfo = getSNMPModel($ip);
- }
- if (defined($modelinfo)) {
- push @res, { port => "socket://$host:$port",
- val => $modelinfo
- };
- }
- }
- }
- }
- close F;
- @res;
-}
-
-sub getNetworkInterfaces() {
-
- # subroutine determines the list of all network interfaces reported
- # by "ifconfig", except "lo".
-
- # Return an empty list if no network is running
- return () unless network_running();
-
- my @interfaces;
-
- local *IFCONFIG_OUT;
- open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") .
- '/bin/sh -c "export LC_ALL=C; ifconfig" 2> /dev/null |' or return ();
- while (my $readline = <IFCONFIG_OUT>) {
- # New entry ...
- if ($readline =~ /^(\S+)\s/) {
- my $dev = $1;
- if ($dev ne "lo") {
- push @interfaces, $dev;
- }
- }
- }
- close(IFCONFIG_OUT);
-
- @interfaces;
-}
-
-sub getIPsOfLocalMachine() {
-
- # subroutine determines all IPs which point to the local machine,
- # except 127.0.0.1 (localhost).
-
- # Return an empty list if no network is running
- return () unless network_running();
-
- # Read the output of "ifconfig" to determine the broadcast addresses of
- # the local networks
- my $dev_is_realnet = 0;
- my @local_ips;
- my $current_ip = "";
-
- local *IFCONFIG_OUT;
- open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") .
- '/bin/sh -c "export LC_ALL=C; ifconfig" 2> /dev/null |' or return ();
- while (my $readline = <IFCONFIG_OUT>) {
- # New entry ...
- if ($readline =~ /^(\S+)\s/) {
- my $dev = $1;
- # ... for a real network (not lo = localhost)
- $dev_is_realnet = $dev ne 'lo';
- # delete previous address
- $current_ip = "";
- }
- # Are we in the important line now?
- if ($readline =~ /\sinet addr:([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\s/) {
- # Rip out the IP address
- $current_ip = $1;
-
- # Are we in an entry for a real network?
- if ($dev_is_realnet) {
- # Store current IP address
- push @local_ips, $current_ip;
- }
- }
- }
- close(IFCONFIG_OUT);
- @local_ips;
-}
-
-sub getIPsInLocalNetworks() {
-
- # subroutine determines the list of all hosts reachable in the local
- # networks by means of pinging the broadcast addresses.
-
- # Return an empty list if no network is running
- return () unless network_running();
-
- # Read the output of "ifconfig" to determine the broadcast addresses of
- # the local networks
- my $dev_is_localnet = 0;
- my $local_nets = {};
- my $dev;
- local *IFCONFIG_OUT;
- open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") .
- '/bin/sh -c "export LC_ALL=C; ifconfig" 2> /dev/null |' or return ();
- while (my $readline = <IFCONFIG_OUT>) {
- # New entry ...
- if ($readline =~ /^(\S+)\s/) {
- $dev = $1;
- # ... for a local network (eth = ethernet,
- # vmnet = VMWare,
- # ethernet card connected to ISP excluded)?
- $dev_is_localnet = $dev =~ /^eth/ || $dev =~ /^vmnet/;
- }
- if ($dev_is_localnet) {
- # Are we in the important line now?
- if ($readline =~ /\saddr:([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\s/) {
- # Rip out the broadcast IP address
- $local_nets->{$dev}{ip} = $1;
- }
- if ($readline =~ /\sBcast:([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\s/) {
- # Rip out the broadcast IP address
- $local_nets->{$dev}{bcast} = $1;
- }
- if ($readline =~ /\sMask:([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\s/) {
- # Rip out the broadcast IP address
- $local_nets->{$dev}{mask} = $1;
- }
- }
- }
- close(IFCONFIG_OUT);
-
- # Now find all addresses in the local networks which we will investigate
- my @addresses;
- foreach my $dev (keys %{$local_nets}) {
- my $ip = $local_nets->{$dev}{ip};
- my $bcast = $local_nets->{$dev}{bcast};
- my $mask = $local_nets->{$dev}{mask};
- if ($mask =~ /255.255.255.(\d+)/) {
- # Small network, never more than 255 boxes, so we return
- # all addresses belonging to this network, nwithout pinging
- my $lastnumber = $1;
- my $masknumber;
- if ($lastnumber < 128) {
- $masknumber = 24;
- } elsif ($lastnumber < 192) {
- $masknumber = 25;
- } elsif ($lastnumber < 224) {
- $masknumber = 26;
- } elsif ($lastnumber < 240) {
- $masknumber = 27;
- } elsif ($lastnumber < 248) {
- $masknumber = 28;
- } elsif ($lastnumber < 252) {
- $masknumber = 29;
- } elsif ($lastnumber < 254) {
- $masknumber = 30;
- } elsif ($lastnumber < 255) {
- $masknumber = 31;
- } else {
- $masknumber = 32;
- }
- push @addresses, "$ip/$masknumber";
- } else {
- # Big network, probably more than 255 boxes, so ping the
- # broadcast address and additionally "nmblookup" the
- # networks (to find Windows servers which do not answer to ping)
- local *F;
- open F, ($::testing ? "" : "chroot $::prefix/ ") .
- qq(/bin/sh -c "export LC_ALL=C; ping -w 1 -b -n $bcast 2> /dev/null | cut -f 4 -d ' ' | sed s/:// | egrep '^[0-9]+\\.[0-9]+\\.[0-9]+\\.[0-9]+' | uniq | sort" |)
- or next;
- local $_;
- while (<F>) { chomp; push @addresses, $_ }
- close F;
- if (-x "/usr/bin/nmblookup") {
- local *F;
- open F, ($::testing ? "" : "chroot $::prefix/ ") .
- qq(/bin/sh -c "export LC_ALL=C; nmblookup -B $bcast \\* 2> /dev/null | cut -f 1 -d ' ' | egrep '^[0-9]+\\.[0-9]+\\.[0-9]+\\.[0-9]+' | uniq | sort" |)
- or next;
- local $_;
- while (<F>) {
- chomp;
- push @addresses, $_ if !(member($_,@addresses));
- }
- }
- }
- }
-
- @addresses;
-}
-
-sub getSMBPrinterShares {
- my ($host) = @_;
-
- # SMB request to auto-detect shares
- local *F;
- open F, ($::testing ? "" : "chroot $::prefix/ ") .
- qq(/bin/sh -c "export LC_ALL=C; smbclient -N -L $host" 2> /dev/null |) or return ();
- my $insharelist = 0;
- my @shares;
- while (my $l = <F>) {
- chomp $l;
- if ($l =~ /^\s*Sharename\s+Type\s+Comment\s*$/i) {
- $insharelist = 1;
- } elsif ($l =~ /^\s*Server\s+Comment\s*$/i) {
- $insharelist = 0;
- } elsif ($l =~ /^\s*(\S+)\s+Printer\s*(.*)$/i &&
- $insharelist) {
- my $name = $1;
- my $description = $2;
- $description =~ s/^(\s*)//;
- push @shares, { name => $name, description => $description };
- }
- }
- close F;
-
- return @shares;
-}
-
-sub getSNMPModel {
- my ($host) = @_;
- my $manufacturer = "";
- my $model = "";
- my $description = "";
- my $serialnumber = "";
-
- # SNMP request to auto-detect model
- local *F;
- open F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- qq(/bin/sh -c "scli -v 1 -c 'show printer info' $host" 2> /dev/null |) or
- return { CLASS => 'PRINTER',
- MODEL => N("Unknown model"),
- MANUFACTURER => "",
- DESCRIPTION => "",
- SERIALNUMBER => ""
- };
- while (my $l = <F>) {
- chomp $l;
- if ($l =~ /^\s*Manufacturer:\s*(\S.*)$/i &&
- $l =~ /^\s*Vendor:\s*(\S.*)$/i) {
- $manufacturer = $1;
- $manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
- $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
- } elsif ($l =~ /^\s*Model:\s*(\S.*)$/i) {
- $model = $1;
- } elsif ($l =~ /^\s*Description:\s*(\S.*)$/i) {
- $description = $1;
- $description =~ s/Hewlett[-\s_]Packard/HP/;
- $description =~ s/HEWLETT[-\s_]PACKARD/HP/;
- } elsif ($l =~ /^\s*Serial\s*Number:\s*(\S.*)$/i) {
- $serialnumber = $1;
- }
- }
- close F;
-
- # Was there a manufacturer and a model in the output?
- # If not, get them from the description
- if ($manufacturer eq "" || $model eq "") {
- # Replace bad description
- if ((length($description) < 5) &&
- (length($description) >= 5)) {
- $description = $model;
- }
- # Guess manufacturer by model name
- if ($description =~
- /^\s*(DeskJet|LaserJet|OfficeJet|PSC|PhotoSmart)\b/i) {
- # HP printer
- $manufacturer = "HP";
- $model = $description;
- } elsif ($description =~
- /^\s*(Stylus|EPL|AcuLaser)\b/i) {
- # Epson printer
- $manufacturer = "Epson";
- $model = $description;
- } elsif ($description =~
- /^\s*(Aficio)\b/i) {
- # Ricoh printer
- $manufacturer = "Ricoh";
- $model = $description;
- } elsif ($description =~
- /^\s*(Optra|Color\s+JetPrinter)\b/i) {
- # Lexmark printer
- $manufacturer = "Lexmark";
- $model = $description;
- } elsif ($description =~
- /^\s*(imageRunner|Pixma|Pixus|BJC|LBP)\b/i) {
- # Canon printer
- $manufacturer = "Canon";
- $model = $description;
- } elsif ($description =~
- /^\s*(Phaser|DocuPrint|(Work|Document)\s*(Home|)Centre)\b/i) {
- # Xerox printer
- $manufacturer = "Xerox";
- $model = $description;
- } elsif ($description =~ /^\s*(\S*)\s+(\S.*)$/) {
- $manufacturer = $1 if $manufacturer eq "";
- $model = $2 if $model eq "";
- }
- # No description field? Make one out of manufacturer and model.
- } elsif ($description eq "") {
- $description = "$manufacturer $model";
- }
-
- # We couldn't determine a model
- $model = N("Unknown model") if $model eq "";
-
- # Remove trailing spaces
- $manufacturer =~ s/(\S+)\s+$/$1/;
- $model =~ s/(\S+)\s+$/$1/;
- $description =~ s/(\S+)\s+$/$1/;
- $serialnumber =~ s/(\S+)\s+$/$1/;
-
- # Now we have all info for one printer
- # Store this auto-detection result in the data structure
- return { CLASS => 'PRINTER',
- MODEL => $model,
- MANUFACTURER => $manufacturer,
- DESCRIPTION => $description,
- SERIALNUMBER => $serialnumber
- };
-}
-
-sub network_running() {
- # If the network is not running return 0, otherwise 1.
- local *F;
- open F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- '/bin/sh -c "export LC_ALL=C; /sbin/ifconfig" 2> /dev/null |' or
- die 'Could not run "ifconfig"!';
- while (my $line = <F>) {
- if ($line !~ /^lo\s+/ && # The loopback device can have been
- # started by the spooler's startup script
- $line =~ /^(\S+)\s+/) { # In this line starts an entry for a
- # running network
- close F;
- return 1;
- }
- }
- close F;
- return 0;
-}
-
-sub parport_addr {
- # auto-detect the parallel port addresses
- my ($device) = @_;
- $device =~ m!^/dev/lp(\d+)$! or
- $device =~ m!^/dev/printers/(\d+)$!;
- my $portnumber = $1;
- my $i = 0;
- my $parportdir;
- foreach (sort { $a =~ /(\d+)/; my $m = $1; $b =~ /(\d+)/; my $n = $1; $m <=> $n } `ls -1d /proc/parport/[0-9]* /proc/sys/dev/parport/parport[0-9]* 2>/dev/null`) {
- chomp;
- if ($i == $portnumber) {
- $parportdir = $_;
- last;
- }
- $i++;
- }
- my $parport_addresses =
- `cat $parportdir/base-addr`;
- my $address_arg;
- if ($parport_addresses =~ /^\s*(\d+)\s+(\d+)\s*$/) {
- $address_arg = sprintf(" -base 0x%x -basehigh 0x%x", $1, $2);
- } elsif ($parport_addresses =~ /^\s*(\d+)\s*$/) {
- $address_arg = sprintf(" -base 0x%x", $1);
- } else {
- $address_arg = "";
- }
- return $address_arg;
-}
-
-1;