first sparc release of DrakX.

1 files changed, 92 insertions, 27 deletions

diff --git a/perl-install/partition_table_sun.pm b/perl-install/partition_table_sun.pm
index 5c8fc749f..808944b8c 100644
--- a/perl-install/partition_table_sun.pm
+++ b/perl-install/partition_table_sun.pm
@@ -45,6 +45,32 @@ my $magic = 0xDABE;
 my $nb_primary = 8;
 my $offset = 0;
 
+sub adjustStart($$) {
+    my ($hd, $part) = @_;
+    my $end = $part->{start} + $part->{size};
+
+    #- since partition must always start on cylinders boundaries on sparc,
+    #- note that if start sector is on the first cylinder, it is adjusted
+    #- to 0 and it is valid.
+    $part->{start} = $part->{start} >= partition_table::cylinder_size() ? round_up($part->{start}, partition_table::cylinder_size($hd)) : 0;
+    $part->{size} = $end - $part->{start};
+}
+sub adjustEnd($$) {
+    &partition_table::adjustEnd;
+}
+
+#- compute crc checksum used for Sun Label partition, expect
+#- $tmp to be the 512 bytes buffer to be read/written to MBR.
+sub compute_crc($) {
+    my ($tmp) = @_;
+    my @l2b = unpack "n256", $tmp;
+    my $crc = 0;
+
+    map { $crc ^= $_ } @l2b;
+
+    $crc;
+}
+
 sub read($$) {
     my ($hd, $sector) = @_;
     my $tmp;
@@ -58,15 +84,17 @@ sub read($$) {
     #- check magic number
     $info{magic}  == $magic or die "bad magic number";
 
+    #- check crc, csum contains the crc so result should be 0.
+    compute_crc($tmp) == 0 or die "bad checksum";
+
     @{$hd->{geom}}{qw(cylinders heads sectors)} = @info{qw(ncyl nsect ntrks)};
 
-    #- TODO verify checksum
     my @pt = mapn {
 	my %h; 
 	@h{@$fields1} = unpack $format1, $_[0];
 	@h{@$fields2} = unpack $format2, $_[1];
 	$h{start} = $sector + $h{start_cylinder} * partition_table::cylinder_size($hd);
-	$h{type} = $typeToDos{$h{type}} || $h{type};
+#	$h{type} = $typeToDos{$h{type}} || $h{type}; #- for rewrite it ?
 	$h{size} or $h{$_} = 0 foreach keys %h;
 	\%h;
     } [ $info{infos} =~ /(.{$size1})/g ], [ $info{partitions} =~ /(.{$size2})/g ];
@@ -79,18 +107,28 @@ sub read($$) {
 sub write($$$;$) {
     my ($hd, $sector, $pt, $info) = @_;
 
-    local *F; partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-    c::lseek_sector(fileno(F), $sector, $offset) or return 0;
-
-    #- TODO compute checksum
+    #- handle testing for writing partition table on file only!
+    local *F;
+    if ($::testing) {
+	my $file = "/tmp/partition_table_$hd->{device}";
+	open F, ">$file" or die "error opening test file $file";
+    } else {
+	partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+        c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+    }
 
     ($info->{infos}, $info->{partitions}) = map { join '', @$_ } list2kv map {
 	$_->{start} % partition_table::cylinder_size($hd) == 0 or die "partition not at beginning of cylinder";
-	local $_->{type} = $typeFromDos{$_->{type}} || $_->{type};
+#	local $_->{type} = $typeFromDos{$_->{type}} || $_->{type};
 	local $_->{start_cylinder} = $_->{start} / partition_table::cylinder_size($hd) - $sector;
 	pack($format1, @$_{@$fields1}), pack($format2, @$_{@$fields2});
     } @$pt;
 
+    #- compute the checksum by building the buffer to write and call compute_crc.
+    #- set csum to 0 so compute_crc will give the right csum value.
+    $info->{csum} = 0;
+    $info->{csum} = compute_crc(pack($main_format, @$info{@$main_fields}));
+
     syswrite F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
 
     1;
@@ -98,31 +136,58 @@ sub write($$$;$) {
 
 sub info {
     my ($hd) = @_;
-    my $dtype_scsi  = 4; #- taken from fdisk, removed unused one,
-    my $dtype_ST506 = 6; #- see fdisk for more
-
-    {
-      magic => $magic,
-      magic2 => $magic,
-      dtype => $hd->{device} =~ /^sd/ ? $dtype_scsi : $dtype_ST506,
-      secsize => $common::SECTORSIZE,
-      ncylinders => $hd->{geom}{cylinders},
-      secpercyl => partition_table::cylinder_size($hd),
-      secprtunit => $hd->{geom}{totalsectors},
-      rpm => 3600,
-      interleave => 1,
-      trackskew => 0,
-      cylskew => 0,
-      headswitch => 0,
-      trkseek => 0,
-      bbsize => 8192, #- size of boot area, with label
-      sbsize => 8192, #- max size of fs superblock
+
+    #- build a default suitable partition table,
+    #- checksum will be built when writing on disk.
+    #- note third partition is ALWAYS of type Whole disk.
+    my $info = {
+	info => "DiskDrake partition table",
+	rspeed => 5400,
+	pcylcount => $hd->{geom}{total_cylinders},
+	sparecyl => 0,
+	ilfact => 1,
+	ncyl => $hd->{geom}{cylinders},
+	nacyl => $hd->{geom}{total_cylinders} - $hd->{geom}{cylinders},
+	ntrks => $hd->{geom}{heads},
+	nsect => $hd->{geom}{sectors},
+	magic => $magic,
     };
+
+    $info;
+#    my $dtype_scsi  = 4; #- taken from fdisk, removed unused one,
+#    my $dtype_ST506 = 6; #- see fdisk for more
+#    {
+#      magic => $magic,
+#      magic2 => $magic,
+#      dtype => $hd->{device} =~ /^sd/ ? $dtype_scsi : $dtype_ST506,
+#      secsize => $common::SECTORSIZE,
+#      ncylinders => $hd->{geom}{cylinders},
+#      secpercyl => partition_table::cylinder_size($hd),
+#      secprtunit => $hd->{geom}{totalsectors},
+#      rpm => 3600,
+#      interleave => 1,
+#      trackskew => 0,
+#      cylskew => 0,
+#      headswitch => 0,
+#      trkseek => 0,
+#      bbsize => 8192, #- size of boot area, with label
+#      sbsize => 8192, #- max size of fs superblock
+#    };
 }
 
 sub clear_raw {
     my ($hd) = @_;
-    { raw => [ ({}) x $nb_primary ], info => info($hd) };
+    my $pt = { raw => [ ({}) x $nb_primary ], info => info($hd) };
+
+    #- handle special case for partition 2 which is whole disk.
+    $pt->{raw}[2] = {
+	type => 5, #- the whole disk type.
+	flags => 0,
+	start_cylinder => 0,
+	size => $hd->{geom}{cylinders} * partition_table::cylinder_size($hd),
+    };
+
+    $pt;
 }
 
 1;