summaryrefslogtreecommitdiffstats
path: root/perl-install/partition_table.pm
diff options
context:
space:
mode:
authorPascal Rigaux <pixel@mandriva.com>1999-09-19 17:31:42 +0000
committerPascal Rigaux <pixel@mandriva.com>1999-09-19 17:31:42 +0000
commit25f65beed0677fa247c513705dbf538225f979c4 (patch)
treee0ec937937cba2d6279e97b3b7036fe0856d5bb2 /perl-install/partition_table.pm
parenta0b5f74447cc699c43c354cb6397ed554605729b (diff)
downloaddrakx-backup-do-not-use-25f65beed0677fa247c513705dbf538225f979c4.tar
drakx-backup-do-not-use-25f65beed0677fa247c513705dbf538225f979c4.tar.gz
drakx-backup-do-not-use-25f65beed0677fa247c513705dbf538225f979c4.tar.bz2
drakx-backup-do-not-use-25f65beed0677fa247c513705dbf538225f979c4.tar.xz
drakx-backup-do-not-use-25f65beed0677fa247c513705dbf538225f979c4.zip
no_comment
Diffstat (limited to 'perl-install/partition_table.pm')
-rw-r--r--perl-install/partition_table.pm48
1 files changed, 24 insertions, 24 deletions
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
index f6b8532dc..9cb2aee6f 100644
--- a/perl-install/partition_table.pm
+++ b/perl-install/partition_table.pm
@@ -29,7 +29,7 @@ my %types = (
4 => "DOS 16-bit <32M",
5 => "Extended",
6 => "DOS FAT16",
- 7 => "OS/2 HPFS", #- or QNX?
+ 7 => "OS/2 HPFS", #- or QNX?
8 => "AIX",
9 => "AIX bootable",
10 => "OS/2 Boot Manager",
@@ -40,28 +40,28 @@ my %types = (
0x12 => "Compaq setup",
0x40 => "Venix 80286",
0x51 => "Novell?",
- 0x52 => "Microport", #- or CPM?
- 0x63 => "GNU HURD", #- or System V/386?
+ 0x52 => "Microport", #- or CPM?
+ 0x63 => "GNU HURD", #- or System V/386?
0x64 => "Novell Netware 286",
0x65 => "Novell Netware 386",
0x75 => "PC/IX",
- 0x80 => "Old MINIX", #- Minix 1.4a and earlier
-
- 0x81 => "Linux/MINIX", #- Minix 1.4b and later
+ 0x80 => "Old MINIX", #- Minix 1.4a and earlier
+
+ 0x81 => "Linux/MINIX", #- Minix 1.4b and later
0x82 => "Linux swap",
0x83 => "Linux native",
-
+
0x93 => "Amoeba",
- 0x94 => "Amoeba BBT", #- (bad block table)
+ 0x94 => "Amoeba BBT", #- (bad block table)
0xa5 => "BSD/386",
0xb7 => "BSDI fs",
0xb8 => "BSDI swap",
0xc7 => "Syrinx",
- 0xdb => "CP/M", #- or Concurrent DOS?
+ 0xdb => "CP/M", #- or Concurrent DOS?
0xe1 => "DOS access",
0xe3 => "DOS R/O",
0xf2 => "DOS secondary",
- 0xff => "BBT" #- (bad track table)
+ 0xff => "BBT" #- (bad track table)
);
my %type2fs = (
@@ -83,7 +83,7 @@ my %fs2type = reverse %type2fs;
1;
-sub important_types { $_[0] and return sort values %types; @important_types }
+sub important_types { $_[0] and return sort values %types; @important_types }
sub type2name($) { $types{$_[0]} || 'unknown' }
sub type2fs($) { $type2fs{$_[0]} }
@@ -103,7 +103,7 @@ sub isPrimary($$) {
0;
}
-sub cylinder_size($) {
+sub cylinder_size($) {
my ($hd) = @_;
$hd->{geom}{sectors} * $hd->{geom}{heads};
}
@@ -112,7 +112,7 @@ sub adjustStart($$) {
my ($hd, $part) = @_;
my $end = $part->{start} + $part->{size};
- $part->{start} = round_up($part->{start},
+ $part->{start} = round_up($part->{start},
$part->{start} % cylinder_size($hd) < 2 * $hd->{geom}{sectors} ?
$hd->{geom}{sectors} : cylinder_size($hd));
$part->{size} = $end - $part->{start};
@@ -157,8 +157,8 @@ sub verifyPrimary($) {
sub assign_device_numbers($) {
my ($hd) = @_;
- my $i = 1;
- $_->{device} = $hd->{prefix} . $i++ foreach @{$hd->{primary}{raw}},
+ my $i = 1;
+ $_->{device} = $hd->{prefix} . $i++ foreach @{$hd->{primary}{raw}},
map { $_->{normal} } @{$hd->{extended} || []};
#- try to figure what the windobe drive letter could be!
@@ -237,8 +237,8 @@ sub read_one($$) {
sub read($;$) {
my ($hd, $clearall) = @_;
- my $pt = $clearall ?
- partition_table_raw::clear_raw() :
+ my $pt = $clearall ?
+ partition_table_raw::clear_raw() :
read_one($hd, 0) || return 0;
$hd->{primary} = $pt;
@@ -297,7 +297,7 @@ sub write($) {
}
$hd->{isDirty} = 0;
- #- now sync disk and re-read the partition table
+ #- now sync disk and re-read the partition table
if ($hd->{needKernelReread}) {
sync();
partition_table_raw::kernel_read($hd);
@@ -309,7 +309,7 @@ sub active($$) {
my ($hd, $part) = @_;
$_->{active} = 0 foreach @{$hd->{primary}{normal}};
- $part->{active} = 0x80;
+ $part->{active} = 0x80;
}
@@ -363,7 +363,7 @@ sub add_extended($$) {
my $end = $e->{start} + $e->{size};
my $start = min($e->{start}, $part->{start});
$end = max($end, $part->{start} + $part->{size}) - $start;
-
+
{ #- faking a resizing of the main extended partition to test for problems
local $e->{start} = $start;
local $e->{size} = $end - $start;
@@ -388,7 +388,7 @@ The only solution is to move your primary partitions to have the hole next to th
($hd->{primary}, -1) : #- -1 size will be computed by adjust_main_extended
(top(@{$hd->{extended}}), $part->{size});
my %ext = ( type => 5, start => $part->{start}, size => $ext_size );
-
+
raw_add($ext->{raw}, \%ext);
$ext->{extended} = \%ext;
push @{$hd->{extended}}, { %ext, raw => [ $part, {}, {}, {} ], normal => $part };
@@ -411,7 +411,7 @@ sub add($$;$$) {
my $e = $hd->{primary}{extended};
- if ($primaryOrExtended eq 'Primary' ||
+ if ($primaryOrExtended eq 'Primary' ||
$primaryOrExtended ne 'Extended' && is_empty_array_ref($hd->{primary}{normal})) {
eval { add_primary($hd, $part) };
return unless $@;
@@ -428,7 +428,7 @@ sub next($$) {
my ($hd, $part) = @_;
first(
- sort { $a->{start} <=> $b->{start} }
+ sort { $a->{start} <=> $b->{start} }
grep { $_->{start} >= $part->{start} + $part->{size} }
get_normal_parts($hd)
);
@@ -483,6 +483,6 @@ sub save($$) {
my @h = @{$hd}{@fields2save};
local *F;
open F, ">$file"
- and print F Data::Dumper->Dump([\@h], ['$h']), "\0"
+ and print F Data::Dumper->Dump([\@h], ['$h']), "\0"
or die _("Error writing to file %s", $file);
}