This commit was manufactured by cvs2svn to create branchtopic/PCMCIA_CS_DISTRO

'PCMCIA_CS_DISTRO'.

1 files changed, 0 insertions, 839 deletions

diff --git a/perl-install/help.pm b/perl-install/help.pm
deleted file mode 100644
index c5dd184e3..000000000
--- a/perl-install/help.pm
+++ /dev/null
@@ -1,839 +0,0 @@
-package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated 
-#            from the manuals !!! 
-#            Write a mail to <doc@linux-mandrake.com> if you want 
-#            it changed.
-
-%steps = (
-empty => '',
-
-addUser => 
-__("GNU/Linux is a multiuser system, and this means that each user can have his
-own preferences, his own files and so on. You can read the ``User Guide''
-to learn more. But unlike \"root\", which is the administrator, the users
-you will add here will not be entitled to change anything except their own
-files and their own configuration. You will have to create at least one
-regular user for yourself. That account is where you should log in for
-routine use. Although it is very practical to log in as \"root\" everyday,
-it may also be very dangerous! The slightest mistake could mean that your
-system would not work any more. If you make a serious mistake as a regular
-user, you may only lose some information, but not the entire system.
-
-First, you have to enter your real name. This is not mandatory, of course -
-as you can actually enter whatever you want. DrakX will then take the first
-word you have entered in the box and will bring it over to the \"User
-name\". This is the name this particular user will use to log into the
-system. You can change it. You then have to enter a password here. A
-non-privileged (regular) user's password is not as crucial as that of
-\"root\" from a security point of view, but that is no reason to neglect it
-- after all, your files are at risk.
-
-If you click on \"Accept user\", you can then add as many as you want. Add
-a user for each one of your friends: your father or your sister, for
-example. When you finish adding all the users you want, select \"Done\".
-
-Clicking the \"Advanced\" button allows you to change the default \"shell\"
-for that user (bash by default)."),
-
-ask_mntpoint_s => 
-__("Listed above are the existing Linux partitions detected on your hard drive.
-You can keep the choices made by the wizard, they are good for most common
-installs. If you make any changes, you must at least define a root
-partition (\"/\"). Do not choose too small a partition or you will not be
-able to install enough software. If you want to store your data on a
-separate partition, you will also need to create a partition for \"/home\"
-(only possible if you have more than one Linux partition available).
-
-Each partition is listed as follows: \"Name\", \"Capacity\".
-
-\"Name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\",
-
- * \"b\" means \"slave hard drive on the primary IDE controller\",
-
- * \"c\" means \"master hard drive on the secondary IDE controller\",
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc."),
-
-chooseCd => 
-__("The Mandrake Linux installation is spread out over several CDROMs. DrakX
-knows if a selected package is located on another CDROM and will eject the
-current CD and ask you to insert a different one as required."),
-
-choosePackages => 
-__("It is now time to specify which programs you wish to install on your
-system. There are thousands of packages available for Mandrake Linux, and
-you are not supposed to know them all by heart.
-
-If you are performing a standard installation from CDROM, you will first be
-asked to specify the CDs you currently have (in Expert mode only). Check
-the CD labels and highlight the boxes corresponding to the CDs you have
-available for installation. Click \"OK\" when you are ready to continue.
-
-Packages are sorted in groups corresponding to a particular use of your
-machine. The groups themselves are sorted into four sections:
-
- * \"Workstation\": if you plan to use your machine as a workstation, select
-one or more of the corresponding groups.
-
- * \"Development\": if the machine is to be used for programming, choose the
-desired group(s).
-
- * \"Server\": if the machine is intended to be a server, you will be able
-to select which of the most common services you wish to see installed on
-the machine.
-
- * \"Graphical Environment\": finally, this is where you will choose your
-preferred graphical environment. At least one must be selected if you want
-to have a graphical workstation!
-
-Moving the mouse cursor over a group name will display a short explanatory
-text about that group.
-
-You can check the \"Individual package selection\" box, which is useful if
-you are familiar with the packages being offered or if you want to have
-total control over what will be installed.
-
-If you started the installation in \"Update\" mode, you can unselect all
-groups to avoid installing any new package. This is useful for repairing or
-updating an existing system."),
-
-choosePackagesTree => 
-__("Finally, depending on your choice of whether or not to select individual
-packages, you will be presented a tree containing all packages classified
-by groups and subgroups. While browsing the tree, you can select entire
-groups, subgroups, or individual packages.
-
-Whenever you select a package on the tree, a description appears on the
-right. When your selection is finished, click the \"Install\" button which
-will then launch the installation process. Depending on the speed of your
-hardware and the number of packages that need to be installed, it may take
-a while to complete the process. A time to complete estimate is displayed
-on the screen to help you gauge if there is sufficient time to enjoy a cup
-of coffee.
-
-!! If a server package has been selected either intentionally or because it
-was part of a whole group, you will be asked to confirm that you really
-want those servers to be installed. Under Mandrake Linux, any installed
-servers are started by default at boot time. Even if they are safe and have
-no known issues at the time the distribution was shipped, it may happen
-that security holes are discovered after this version of Mandrake Linux was
-finalized. If you do not know what a particular service is supposed to do
-or why it is being installed, then click \"No\". Clicking \"Yes\" will
-install the listed services and they will be started automatically by
-default. !!
-
-The \"Automatic dependencies\" option simply disables the warning dialog
-which appears whenever the installer automatically selects a package. This
-occurs because it has determined that it needs to satisfy a dependency with
-another package in order to successfully complete the installation.
-
-The tiny floppy disc icon at the bottom of the list allows to load the
-packages list chosen during a previous installation. Clicking on this icon
-will ask you to insert a floppy disk previously created at the end of
-another installation. See the second tip of last step on how to create such
-a floppy."),
-
-configureNetwork => 
-__("If you wish to connect your computer to the Internet or to a local network,
-please choose the correct option. Please turn on your device before
-choosing the correct option to let DrakX detect it automatically.
-
-Mandrake Linux proposes the configuration of an Internet connection at
-installation time. Available connections are: traditional modem, ISDN
-modem, ADSL connection, cable modem, and finally a simple LAN connection
-(Ethernet).
-
-Here, we will not detail each configuration. Simply make sure that you have
-all the parameters from your Internet Service Provider or system
-administrator.
-
-You can consult the manual chapter about Internet connections for details
-about the configuration, or simply wait until your system is installed and
-use the program described there to configure your connection.
-
-If you wish to configure the network later after installation or if you
-have finished configuring your network connection, click \"Cancel\"."),
-
-configureServices => 
-__("You may now choose which services you wish to start at boot time.
-
-Here are presented all the services available with the current
-installation. Review them carefully and uncheck those which are not always
-needed at boot time.
-
-You can get a short explanatory text about a service by selecting a
-specific service. However, if you are not sure whether a service is useful
-or not, it is safer to leave the default behavior.
-
-At this stage, be very careful if you intend to use your machine as a
-server: you will probably not want to start any services that you do not
-need. Please remember that several services can be dangerous if they are
-enabled on a server. In general, select only the services you really need."),
-
-configureTimezoneGMT => 
-__("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in
-local time according to the time zone you selected."),
-
-configureX => 
-__("X (for X Window System) is the heart of the GNU/Linux graphical interface
-on which all the graphics environments (KDE, Gnome, AfterStep,
-WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX
-will try to configure X automatically.
-
-It is extremely rare for it to fail, unless the hardware is very old (or
-very new). If it succeeds, it will start X automatically with the best
-resolution possible depending on the size of the monitor. A window will
-then appear and ask you if you can see it.
-
-If you are doing an \"Expert\" install, you will enter the X configuration
-wizard. See the corresponding section of the manual for more information
-about this wizard.
-
-If you can see the message and answer \"Yes\", then DrakX will proceed to
-the next step. If you cannot see the message, it simply means that the
-configuration was wrong and the test will automatically end after 10
-seconds, restoring the screen."),
-
-configureXmain => 
-__("The first time you try the X configuration, you may not be very satisfied
-with its display (screen is too small, shifted left or right...). Hence,
-even if X starts up correctly, DrakX then asks you if the configuration
-suits you. It will also propose to change it by displaying a list of valid
-modes it could find, asking you to select one.
-
-As a last resort, if you still cannot get X to work, choose \"Change
-graphics card\", select \"Unlisted card\", and when prompted on which
-server you want, choose \"FBDev\". This is a failsafe option which works
-with any modern graphics card. Then choose \"Test again\" to be sure."),
-
-configureXxdm => 
-__("Finally, you will be asked whether you want to see the graphical interface
-at boot. Note this question will be asked even if you chose not to test the
-configuration. Obviously, you want to answer \"No\" if your machine is to
-act as a server, or if you were not successful in getting the display
-configured."),
-
-createBootdisk => 
-__("The Mandrake Linux CDROM has a built-in rescue mode. You can access it by
-booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at
-the prompt. But in case your computer cannot boot from the CDROM, you
-should come back to this step for help in at least two situations:
-
- * when installing the boot loader, DrakX will rewrite the boot sector (MBR)
-of your main disk (unless you are using another boot manager) so that you
-can start up with either Windows or GNU/Linux (assuming you have Windows in
-your system). If you need to reinstall Windows, the Microsoft install
-process will rewrite the boot sector, and then you will not be able to
-start GNU/Linux!
-
- * if a problem arises and you cannot start up GNU/Linux from the hard disk,
-this floppy disk will be the only means of starting up GNU/Linux. It
-contains a fair number of system tools for restoring a system, which has
-crashed due to a power failure, an unfortunate typing error, a typo in a
-password, or any other reason.
-
-When you click on this step, you will be asked to enter a disk inside the
-drive. The floppy disk you will insert must be empty or contain data which
-you do not need. You will not have to format it since DrakX will rewrite
-the whole disk."),
-
-doPartitionDisks => 
-__("At this point you need to choose where on your hard drive to install your
-Mandrake Linux operating system. If your hard drive is empty or if an
-existing operating system is using all the space available, you will need
-to partition it. Basically, partitioning a hard drive consists of logically
-dividing it to create space to install your new Mandrake Linux system.
-
-Because the effects of the partitioning process are usually irreversible,
-partitioning can be intimidating and stressful if you are an inexperienced
-user. Fortunately, there is a wizard which simplifies this process. Before
-beginning, please consult the manual and take your time.
-
-If you are running the install in Expert mode, you will enter DiskDrake,
-the Mandrake Linux partitioning tool, which allows you to fine-tune your
-partitions. See the DiskDrake chapter of the manual. From the installation
-interface, you can use the wizards as described here by clicking the
-\"Wizard\" button of the dialog.
-
-If partitions have already been defined, either from a previous
-installation or from another partitioning tool, simply select those to
-install your Linux system.
-
-If partitions are not defined, you will need to create them using the
-wizard. Depending on your hard drive configuration, several options are
-available:
-
- * \"Use free space\": this option will simply lead to an automatic
-partitioning of your blank drive(s). You will not be prompted further.
-
- * \"Use existing partition\": the wizard has detected one or more existing
-Linux partitions on your hard drive. If you want to use them, choose this
-option.
-
- * \"Use the free space on the Windows partition\": if Microsoft Windows is
-installed on your hard drive and takes all the space available on it, you
-have to create free space for Linux data. To do that, you can delete your
-Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert
-mode\" solutions) or resize your Microsoft Windows partition. Resizing can
-be performed without the loss of any data. This solution is recommended if
-you want to use both Mandrake Linux and Microsoft Windows on same computer.
-
-   Before choosing this option, please understand that after this procedure,
-the size of your Microsoft Windows partition will be smaller than at the
-present time. You will have less free space under Microsoft Windows to
-store your data or to install new software.
-
- * \"Erase entire disk\": if you want to delete all data and all partitions
-present on your hard drive and replace them with your new Mandrake Linux
-system, choose this option. Be careful with this solution because you will
-not be able to revert your choice after confirmation.
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Remove Windows\": this will simply erase everything on the drive and
-begin fresh, partitioning everything from scratch. All data on your disk
-will be lost.
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Expert mode\": choose this option if you want to manually partition
-your hard drive. Be careful - it is a powerful but dangerous choice. You
-can very easily lose all your data. Hence, do not choose this unless you
-know what you are doing."),
-
-exitInstall => 
-__("There you are. Installation is now complete and your GNU/Linux system is
-ready to use. Just click \"OK\" to reboot the system. You can start
-GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as
-soon as the computer has booted up again.
-
-The \"Advanced\" button (in Expert mode only) shows two more buttons to:
-
- * \"generate auto-install floppy\": to create an installation floppy disk
-which will automatically perform a whole installation without the help of
-an operator, similar to the installation you just configured.
-
-   Note that two different options are available after clicking the button:
-
-    * \"Replay\". This is a partially automated install as the partitioning
-step (and only this one) remains interactive.
-
-    * \"Automated\". Fully automated install: the hard disk is completely
-rewritten, all data is lost.
-
-   This feature is very handy when installing a great number of similar
-machines. See the Auto install section at our web site.
-
- * \"Save packages selection\"(*) : saves the packages selection as made
-previously. Then, when doing another installation, insert the floppy inside
-the driver and run the installation going to the help screen by pressing on
-the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.
-
-(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
-\"mformat a:\")"),
-
-formatPartitions => 
-__("Any partitions that have been newly defined must be formatted for use
-(formatting means creating a file system).
-
-At this time, you may wish to reformat some already existing partitions to
-erase any data they contain. If you wish to do that, please select those
-partitions as well.
-
-Please note that it is not necessary to reformat all pre-existing
-partitions. You must reformat the partitions containing the operating
-system (such as \"/\", \"/usr\" or \"/var\") but you do not have to
-reformat partitions containing data that you wish to keep (typically
-\"/home\").
-
-Please be careful when selecting partitions. After formatting, all data on
-the selected partitions will be deleted and you will not be able to recover
-any of them.
-
-Click on \"OK\" when you are ready to format partitions.
-
-Click on \"Cancel\" if you want to choose another partition for your new
-Mandrake Linux operating system installation.
-
-Click on \"Advanced\" if you wish to select partitions that will be checked
-for bad blocks on the disc."),
-
-installPackages => 
-__("Your new Mandrake Linux operating system is currently being installed.
-Depending on the number of packages you will be installing and the speed of
-your computer, this operation could take from a few minutes to a
-significant amount of time.
-
-Please be patient."),
-
-license => 
-__("Before continuing you should read carefully the terms of the license. It
-covers the whole Mandrake Linux distribution, and if you do not agree with
-all the terms in it, click on the \"Refuse\" button which will immediately
-terminate the installation. To continue with the installation, click the
-\"Accept\" button."),
-
-miscellaneous => 
-__("At this point, it is time to choose the security level desired for the
-machine. As a rule of thumb, the more exposed the machine is, and the more
-the data stored in it is crucial, the higher the security level should be.
-However, a higher security level is generally obtained at the expenses of
-easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to
-get more information about the meaning of these levels.
-
-If you do not know what to choose, keep the default option."),
-
-partition_with_diskdrake => 
-__("At this point, you need to choose what partition(s) will be used for the
-installation of your Mandrake Linux system. If partitions have been already
-defined, either from a previous installation of GNU/Linux or from another
-partitioning tool, you can use existing partitions. Otherwise hard drive
-partitions must be defined.
-
-To create partitions, you must first select a hard drive. You can select
-the disk for partitioning by clicking on \"hda\" for the first IDE drive,
-\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.
-
-To partition the selected hard drive, you can use these options:
-
- * \"Clear all\": this option deletes all partitions on the selected hard
-drive.
-
- * \"Auto allocate\": this option allows you to automatically create Ext2
-and swap partitions in free space of your hard drive.
-
- * \"Rescue partition table\": if your partition table is damaged, you can
-try to recover it using this option. Please be careful and remember that it
-can fail.
-
- * \"Undo\": use this option to cancel your changes.
-
- * \"Reload\": you can use this option if you wish to undo all changes and
-load your initial partitions table.
-
- * \"Wizard\": use this option if you wish to use a wizard to partition your
-hard drive. This is recommended if you do not have a good knowledge of
-partitioning.
-
- * \"Restore from floppy\": this option will allow you to restore a
-previously saved partition table from floppy disk.
-
- * \"Save to floppy\": saves the partition table to a floppy. Useful for
-later partition-table recovery if necessary. It is strongly recommended to
-perform this step.
-
- * \"Done\": when you have finished partitioning your hard drive, this will
-save your changes back to disc.
-
-Note: you can reach any option using the keyboard. Navigate through the
-partitions using [Tab] and [Up/Down] arrows.
-
-When a partition is selected, you can use:
-
- * Ctrl-c to create a new partition (when an empty partition is selected);
-
- * Ctrl-d to delete a partition;
-
- * Ctrl-m to set the mount point.
-
-If you are installing on a PPC machine, you will want to create a small HFS
-\"bootstrap\" partition of at least 1MB which will be used by the yaboot
-boot loader. If you opt to make the partition a bit larger, say 50MB, you
-may find it a useful place to store a spare kernel and ramdisk images for
-emergency boot situations."),
-
-resizeFATChoose => 
-__("More than one Microsoft Windows partition has been detected on your hard
-drive. Please choose the one you want to resize in order to install your
-new Mandrake Linux operating system.
-
-Each partition is listed as follows: \"Linux name\", \"Windows name\"
-\"Capacity\".
-
-\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\",
-
- * \"b\" means \"slave hard drive on the primary IDE controller\",
-
- * \"c\" means \"master hard drive on the secondary IDE controller\",
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc.
-
-\"Windows name\" is the letter of your hard drive under Windows (the first
-disk or partition is called \"C:\")."),
-
-resizeFATWait => 
-__("Please be patient. This operation can take several minutes."),
-
-selectInstallClass => 
-__("DrakX now needs to know if you want to perform a default (\"Recommended\")
-installation or if you want to have greater control (\"Expert\"). You also
-have the choice of performing a new install or an upgrade of an existing
-Mandrake Linux system. Clicking \"Install\" will completely wipe out the
-old system. Select \"Upgrade\" if you are upgrading or repairing an
-existing system.
-
-Please choose \"Install\" if there are no previous version of Mandrake
-Linux installed or if you wish to boot between various operating systems.
-
-Please choose \"Update\" if you wish to update or repair an already
-installed version of Mandrake Linux.
-
-Depending on your knowledge of GNU/Linux, please choose one of the
-following to install or update your Mandrake Linux operating system:
-
- * Recommended: choose this if you have never installed a GNU/Linux
-operating system. The installation will be very easy and you will only be
-asked a few questions.
-
- * Expert: if you have a good knowledge of GNU/Linux, you can choose this
-installation class. The expert installation will allow you to perform a
-highly customized installation. Answering some of the questions can be
-difficult if you do not have a good knowledge of GNU/Linux so do not choose
-this unless you know what you are doing."),
-
-selectKeyboard => 
-__("Normally, DrakX selects the right keyboard for you (depending on the
-language you have chosen) and you will not even see this step. However, you
-might not have a keyboard that corresponds exactly to your language: for
-example, if you are an English speaking Swiss person, you may still want
-your keyboard to be a Swiss keyboard. Or if you speak English but are
-located in Quebec, you may find yourself in the same situation. In both
-cases, you will have to go back to this installation step and select an
-appropriate keyboard from the list.
-
-Click on the \"More\" button to be presented with the complete list of
-supported keyboards."),
-
-selectLanguage => 
-__("Please choose your preferred language for installation and system usage.
-
-Clicking on the \"Advanced\" button will allow you to select other
-languages to be installed on your workstation. Selecting other languages
-will install the language-specific files for system documentation and
-applications. For example, if you will host users from Spain on your
-machine, select English as the main language in the tree view and in the
-Advanced section click on the grey star corresponding to \"Spanish|Spain\".
-
-Note that multiple languages may be installed. Once you have selected any
-additional locales click the \"OK\" button to continue."),
-
-selectMouse => 
-__("By default, DrakX assumes you have a two-button mouse and will set it up
-for third-button emulation. DrakX will automatically know whether it is a
-PS/2, serial or USB mouse.
-
-If you wish to specify a different type of mouse select the appropriate
-type from the list provided.
-
-If you choose a mouse other than the default you will be presented with a
-mouse test screen. Use the buttons and wheel to verify that the settings
-are good. If the mouse is not working correctly press the space bar or
-RETURN to \"Cancel\" and choose again."),
-
-selectSerialPort => 
-__("Please select the correct port. For example, the COM1 port under MS Windows
-is named ttyS0 under GNU/Linux."),
-
-setRootPassword => 
-__("This is the most crucial decision point for the security of your GNU/Linux
-system: you have to enter the \"root\" password. \"root\" is the system
-administrator and is the only one authorized to make updates, add users,
-change the overall system configuration, and so on. In short, \"root\" can
-do everything! That is why you must choose a password that is difficult to
-guess - DrakX will tell you if it is too easy. As you can see, you can
-choose not to enter a password, but we strongly advise you against this if
-only for one reason: do not think that because you booted GNU/Linux that
-your other operating systems are safe from mistakes. Since \"root\" can
-overcome all limitations and unintentionally erase all data on partitions
-by carelessly accessing the partitions themselves, it is important for it
-to be difficult to become \"root\".
-
-The password should be a mixture of alphanumeric characters and at least 8
-characters long. Never write down the \"root\" password - it makes it too
-easy to compromise a system.
-
-However, please do not make the password too long or complicated because
-you must be able to remember it without too much effort.
-
-The password will not be displayed on screen as you type it in. Hence, you
-will have to type the password twice to reduce the chance of a typing
-error. If you do happen to make the same typing error twice, this
-\"incorrect\" password will have to be used the first time you connect.
-
-In expert mode, you will be asked if you will be connecting to an
-authentication server, like NIS or LDAP.
-
-If your network uses LDAP (or NIS) protocol for authentication, select
-\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your
-network administrator.
-
-If your computer is not connected to any administrated network, you will
-want to choose \"Local files\" for authentication."),
-
-setupBootloader => 
-__("LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is
-totally automated. In fact, DrakX analyzes the disk boot sector and acts
-accordingly, depending on what it finds here:
-
- * if Windows boot sector is found, it will replace it with a GRUB/LILO boot
-sector. Hence, you will be able to load either GNU/Linux or another OS;
-
- * if a GRUB or LILO boot sector is found, it will replace it with a new
-one;
-
-If in doubt, DrakX will display a dialog with various options.
-
- * \"Boot loader to use\": you have three choices:
-
-    * \"LILO with graphical menu\": if you prefer LILO with its graphical
-interface.
-
-    * \"GRUB\": if you prefer GRUB (text menu).
-
-    * \"LILO with text menu\": if you prefer LILO with its text menu interface.
-
- * \"Boot device\": in most cases, you will not change the default
-(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the
-second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").
-
- * \"Delay before booting the default image\": when rebooting the computer,
-this is the delay granted to the user to choose - in the boot loader menu,
-another boot entry than the default one.
-
-!! Beware that if you choose not to install a boot loader (by selecting
-\"Cancel\" here), you must ensure that you have a way to boot your Mandrake
-Linux system! Also be sure you know what you do before changing any of the
-options. !!
-
-Clicking the \"Advanced\" button in this dialog will offer many advanced
-options, which are reserved to the expert user.
-
-Mandrake Linux installs its own boot loader, which will let you boot either
-GNU/Linux or any other operating systems which you have on your system.
-
-If there is another operating system installed on your machine, it will be
-automatically added to the boot menu. Here, you can choose to fine-tune the
-existing options. Double-clicking on an existing entry allows you to change
-its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes
-on to the next installation step."),
-
-setupBootloaderAddEntry => 
-__("LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot
-either GNU/Linux or any other operating system present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful to choose the correct parameters.
-
-You may also not want to give access to these other operating systems to
-anyone. In which case, you can delete the corresponding entries. But then,
-you will need a boot disk in order to boot those other operating systems!"),
-
-setupBootloaderBeginner => 
-__("You must indicate where you wish to place the information required to boot
-to GNU/Linux.
-
-Unless you know exactly what you are doing, choose \"First sector of drive
-(MBR)\"."),
-
-setupDefaultSpooler => 
-__("Here we select a printing system for your computer to use. Other OSes may
-offer you one, but Mandrake offers three.
-
- * \"pdq\" - which means ``print, don't queue'', is the choice if you have a
-direct connection to your printer and you want to be able to panic out of
-printer jams, and you do not have any networked printers. It will handle
-only very simple network cases and is somewhat slow for networks. Pick
-\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your
-choices after install by running PrinterDrake from the Mandrake Control
-Center and clicking the expert button.
-
- * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to
-your local printer and also halfway round the planet. It is simple and can
-act like a server or a client for the ancient \"lpd\" printing system, so
-it is compatible with the systems that went before. It can do many tricks,
-but the basic setup is almost as easy as \"pdq\". If you need this to
-emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has
-graphical front-ends for printing or choosing printer options.
-
- * \"lprNG\" - ``line printer daemon New Generation''. This system can do
-approximately the same things the others can do, but it will print to
-printers mounted on a Novell Network, because it supports IPX protocol, and
-it can print directly to shell commands. If you have need of Novell or
-printing to commands without using a separate pipe construct, use lprNG.
-Otherwise, CUPS is preferable as it is simpler and better at working over
-networks."),
-
-setupSCSI => 
-__("DrakX is now detecting any IDE devices present in your computer. It will
-also scan for one or more PCI SCSI card(s) on your system. If a SCSI card
-is found, DrakX will automatically install the appropriate driver.
-
-Because hardware detection will sometimes not detect a piece of hardware,
-DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"
-if you know that there is a SCSI card installed in your machine. You will
-be presented a list of SCSI cards to choose from. Click \"No\" if you have
-no SCSI hardware. If you are unsure you can check the list of hardware
-detected in your machine by selecting \"See hardware info\" and clicking
-\"OK\". Examine the list of hardware and then click on the \"OK\" button to
-return to the SCSI interface question.
-
-If you have to manually specify your adapter, DrakX will ask if you want to
-specify options for it. You should allow DrakX to probe the hardware for
-the card-specific options that the hardware needs to initialize. This
-usually works well.
-
-If DrakX is not able to probe for the options that need to be passed, you
-will need to manually provide options to the driver. Please review the
-``User Guide'' (chapter 3, section \"Collecting Information on Your
-Hardware\") for hints on retrieving the parameters required from hardware
-documentation, from the manufacturer's web site (if you have Internet
-access) or from Microsoft Windows (if you used this hardware with Windows
-on your system)."),
-
-setupYabootAddEntry => 
-__("You can add additional entries for yaboot, either for other operating
-systems, alternate kernels, or for an emergency boot image.
-
-For other OS's, the entry consists only of a label and the root partition.
-
-For Linux, there are a few possible options:
-
- * Label: this is simply the name you will have to type at the yaboot prompt
-to select this boot option.
-
- * Image: this would be the name of the kernel to boot. Typically, vmlinux
-or a variation of vmlinux with an extension.
-
- * Root: the \"root\" device or \"/\" for your Linux installation.
-
- * Append: on Apple hardware, the kernel append option is used quite often
-to assist in initializing video hardware, or to enable keyboard mouse
-button emulation for the often lacking 2nd and 3rd mouse buttons on a stock
-Apple mouse. The following are some examples:
-
-         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
-
-         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
-
- * Initrd: this option can be used either to load initial modules, before
-the boot device is available, or to load a ramdisk image for an emergency
-boot situation.
-
- * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you
-need to allocate a large ramdisk, this option can be used.
-
- * Read-write: normally the \"root\" partition is initially brought up in
-read-only, to allow a file system check before the system becomes \"live\".
-Here, you can override this option.
-
- * NoVideo: should the Apple video hardware prove to be exceptionally
-problematic, you can select this option to boot in \"novideo\" mode, with
-native frame buffer support.
-
- * Default: selects this entry as being the default Linux selection,
-selectable by just pressing ENTER at the yaboot prompt. This entry will
-also be highlighted with a \"*\", if you press [Tab] to see the boot
-selections."),
-
-setupYabootGeneral => 
-__("Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot
-either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,
-these other operating systems are correctly detected and installed. If this
-is not the case, you can add an entry by hand in this screen. Be careful as
-to choose the correct parameters.
-
-Yaboot's main options are:
-
- * Init Message: a simple text message that is displayed before the boot
-prompt.
-
- * Boot Device: indicate where you want to place the information required to
-boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to
-hold this information.
-
- * Open Firmware Delay: unlike LILO, there are two delays available with
-yaboot. The first delay is measured in seconds and at this point, you can
-choose between CD, OF boot, MacOS or Linux.
-
- * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
-After selecting Linux, you will have this delay in 0.1 second before your
-default kernel description is selected.
-
- * Enable CD Boot?: checking this option allows you to choose \"C\" for CD
-at the first boot prompt.
-
- * Enable OF Boot?: checking this option allows you to choose \"N\" for Open
-Firmware at the first boot prompt.
-
- * Default OS: you can select which OS will boot by default when the Open
-Firmware Delay expires."),
-
-summary => 
-__("Here are presented various parameters concerning your machine. Depending on
-your installed hardware, you may - or not, see the following entries:
-
- * \"Mouse\": check the current mouse configuration and click on the button
-to change it if necessary.
-
- * \"Keyboard\": check the current keyboard map configuration and click on
-the button to change that if necessary.
-
- * \"Timezone\": DrakX, by default, guesses your time zone from the language
-you have chosen. But here again, as for the choice of a keyboard, you may
-not be in the country for which the chosen language should correspond.
-Hence, you may need to click on the \"Timezone\" button in order to
-configure the clock according to the time zone you are in.
-
- * \"Printer\": clicking on the \"No Printer\" button will open the printer
-configuration wizard.
-
- * \"Sound card\": if a sound card is detected on your system, it is
-displayed here. No modification possible at installation time.
-
- * \"TV card\": if a TV card is detected on your system, it is displayed
-here. No modification possible at installation time.
-
- * \"ISDN card\": if an ISDN card is detected on your system, it is
-displayed here. You can click on the button to change the parameters
-associated to it."),
-
-takeOverHdChoose => 
-__("Choose the hard drive you want to erase to install your new Mandrake Linux
-partition. Be careful, all data present on it will be lost and will not be
-recoverable!"),
-
-takeOverHdConfirm => 
-__("Click on \"OK\" if you want to delete all data and partitions present on
-this hard drive. Be careful, after clicking on \"OK\", you will not be able
-to recover any data and partitions present on this hard drive, including
-any Windows data.
-
-Click on \"Cancel\" to cancel this operation without losing any data and
-partitions present on this hard drive."),
-);