diff options
author | Mystery Man <unknown@mandriva.org> | 2000-11-08 00:01:16 +0000 |
---|---|---|
committer | Mystery Man <unknown@mandriva.org> | 2000-11-08 00:01:16 +0000 |
commit | d5c526273db473a7d87a26000585900fc10dda7d (patch) | |
tree | 0fdaabe7a00921b6cc556601b103d344fc7ac781 /perl-install/Xconfigurator_consts.pm | |
parent | 9c164312d4bfff6d93e1c4529de6b992f2bebc44 (diff) | |
download | drakx-backup-do-not-use-d5c526273db473a7d87a26000585900fc10dda7d.tar drakx-backup-do-not-use-d5c526273db473a7d87a26000585900fc10dda7d.tar.gz drakx-backup-do-not-use-d5c526273db473a7d87a26000585900fc10dda7d.tar.bz2 drakx-backup-do-not-use-d5c526273db473a7d87a26000585900fc10dda7d.tar.xz drakx-backup-do-not-use-d5c526273db473a7d87a26000585900fc10dda7d.zip |
This commit was manufactured by cvs2svn to create branch
'unlabeled-1.1.1'.
Diffstat (limited to 'perl-install/Xconfigurator_consts.pm')
-rw-r--r-- | perl-install/Xconfigurator_consts.pm | 643 |
1 files changed, 214 insertions, 429 deletions
diff --git a/perl-install/Xconfigurator_consts.pm b/perl-install/Xconfigurator_consts.pm index 3ff43ae09..976f65d9e 100644 --- a/perl-install/Xconfigurator_consts.pm +++ b/perl-install/Xconfigurator_consts.pm @@ -1,353 +1,208 @@ use common qw(:common); -%depths = ( - 8 => __("256 colors (8 bits)"), - 15 => __("32 thousand colors (15 bits)"), - 16 => __("65 thousand colors (16 bits)"), - 24 => __("16 million colors (24 bits)"), - 32 => __("4 billion colors (32 bits)"), +%keymap_translate = ( + uk => "gb", ); -@depths = ikeys(%depths); +@depths = qw(8 15 16 24 32); + +$resolution_wanted = "1024x768"; @resolutions = qw(640x480 800x600 1024x768 1152x864 1280x1024 1600x1200); -@window_managers = qw(icewm wmaker kwm afterstep fvwm fvwm2 fvwm95 mwm twm enlightenment xfce blackbox); - -%serversdriver = arch() =~ /^sparc/ ? ( - 'Mach64' => "accel", - '3DLabs' => "accel", - 'Sun' => "fbdev", - 'Sun24' => "fbdev", - 'SunMono' => "fbdev", - 'VGA16' => "vga16", - 'FBDev' => "fbdev", -) : ( - 'SVGA' => "svga", -#- 'Rage128' => "svga", -#- '3dfx' => "svga", - 'S3' => "accel", - 'Mach32' => "accel", - 'Mach8' => "accel", - '8514' => "accel", - 'P9000' => "accel", - 'AGX' => "accel", - 'W32' => "accel", - 'Mach64' => "accel", - 'I128' => "accel", - 'S3V' => "accel", - '3DLabs' => "accel", - 'Mono' => "vga2", - 'VGA16' => "vga16", - 'FBDev' => "fbdev", -); -@svgaservers = grep { $serversdriver{$_} eq "svga" } keys(%serversdriver); -@accelservers = grep { $serversdriver{$_} eq "accel" } keys(%serversdriver); -@allbutfbservers = grep { arch() =~ /^sparc/ || $serversdriver{$_} ne "fbdev" } keys(%serversdriver); -@allservers = keys(%serversdriver); - -%vgamodes = ( - '640xx8' => 769, - '640x480x8' => 769, - '800xx8' => 771, - '800x600x8' => 771, - '1024xx8' => 773, - '1024x768x8' => 773, - '1280xx8' => 775, - '1280x1024x8' => 775, - '640xx15' => 784, - '640x480x15' => 784, - '800xx15' => 787, - '800x600x15' => 787, - '1024xx15' => 790, - '1024x768x15' => 790, - '1280xx15' => 793, - '1280x1024x15' => 793, - '640xx16' => 785, - '640x480x16' => 785, - '800xx16' => 788, - '800x600x16' => 788, - '1024xx16' => 791, - '1024x768x16' => 791, - '1280xx16' => 794, - '1280x1024x16' => 794, -#- '640xx24' => 786, #- there is a problem with these resolutions since the BIOS may take 24 or 32 planes. -#- '640x480x24' => 786, -#- '800xx24' => 789, -#- '800x600x24' => 789, -#- '1024xx24' => 792, -#- '1024x768x24' => 792, -#- '1280xx24' => 795, -#- '1280x1024x24' => 795, -); -{ #- @monitorSize2resolution - my %l = my @l = ( #- size in inch - 13 => "640x480", - 14 => "800x600", - 15 => "800x600", - 16 => "1024x768", - 17 => "1152x864", - 18 => "1152x864", - 19 => "1280x1024", - 20 => "1600x1200", - ); - for (my $i = 0; $i < $l[0]; $i++) { - $monitorSize2resolution[$i] = $l[1]; - } - while (my ($s, $r) = each %l) { - $monitorSize2resolution[$s] = $r; - } -} +@accelservers = qw(S3 Mach32 Mach8 8514 P9000 AGX W32 Mach64 I128 S3V 3DLabs); +@allservers = (qw(Mono VGA16 SVGA), @accelservers); %videomemory = ( - __("256 kB") => 256, - __("512 kB") => 512, - __("1 MB") => 1024, - __("2 MB") => 2048, - __("4 MB") => 4096, - __("8 MB") => 8192, - __("16 MB or more") => 16384, + __("256 kb") => 256, + __("512 kb") => 512, + __("1 mb") => 1024, + __("2 mb") => 2048, + __("4 mb") => 4096, + __("8 mb") => 8192, + __("16 mb or more") => 16384, ); -$default_monitor = "High Frequency SVGA, 1024x768 at 70 Hz"; %standard_monitors = ( - __("Standard VGA, 640x480 at 60 Hz") => [ '640x480@60', "31.5" , "60" ], - __("Standard VGA, 640x480 at 60 Hz") => [ '640x480@60', "31.5" , "60" ], - __("Super VGA, 800x600 at 56 Hz") => [ '800x600@56', "31.5-35.1" , "55-60" ], - __("8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)") => [ '8514 compatible', "31.5,35.5" , "60,70,87" ], - __("Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz") => [ '1024x768@87i', "31.5,35.15,35.5" , "55-90" ], - __("Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz") => [ '800x600@60', "31.5-37.9" , "55-90" ], - __("Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz") => [ '1024x768@60', "31.5-48.5" , "55-90" ], - __("High Frequency SVGA, 1024x768 at 70 Hz") => [ '1024x768@70', "31.5-57.0" , "50-90" ], - __("Multi-frequency that can do 1280x1024 at 60 Hz") => [ '1280x1024@60', "31.5-64.3" , "50-90" ], - __("Multi-frequency that can do 1280x1024 at 74 Hz") => [ '1280x1024@74', "31.5-79.0" , "50-100" ], - __("Multi-frequency that can do 1280x1024 at 76 Hz") => [ '1280x1024@76', "31.5-82.0" , "40-100" ], - __("Monitor that can do 1600x1200 at 70 Hz") => [ '1600x1200@70', "31.5-88.0" , "50-120" ], - __("Monitor that can do 1600x1200 at 76 Hz") => [ '1600x1200@76', "31.5-94.0" , "50-160" ], + __("Standard VGA, 640x480 in 60 Hz") => [ '640x480@60', "31.5" , "60" ], + __("Super VGA, 800x600 in 56 Hz") => [ '800x600@56', "31.5-35.1" , "55-60" ], + __("8514 Compatible, 1024x768 in 87 Hz interlaced (no 800x600)") => [ '8514 compatible', "31.5,35.5" , "60,70,87" ], + __("Super VGA, 1024x768 in 87 Hz interlaced, 800x600 in 56 Hz") => [ '1024x768@87i', "31.5,35.15,35.5" , "55-90" ], + __("Extended Super VGA, 800x600 in 60 Hz, 640x480 in 72 Hz") => [ '800x600@60', "31.5-37.9" , "55-90" ], + __("Non-Interlaced SVGA, 1024x768 in 60 Hz, 800x600 in 72 Hz") => [ '1024x768@60', "31.5-48.5" , "55-90" ], + __("High Frequency SVGA, 1024x768 in 70 Hz") => [ '1024x768@70', "31.5-57.0" , "50-90" ], + __("Multi-frequency that can do 1280x1024 in 60 Hz") => [ '1280x1024@60', "31.5-64.3" , "50-90" ], + __("Multi-frequency that can do 1280x1024 in 74 Hz") => [ '1280x1024@74', "31.5-79.0" , "50-100" ], + __("Multi-frequency that can do 1280x1024 in 76 Hz") => [ '1280x1024@76', "31.5-82.0" , "40-100" ], + __("Monitor that can do 1600x1200 in 70 Hz") => [ '1600x1200@70', "31.5-88.0" , "50-120" ], + __("Monitor that can do 1600x1200 in 76 Hz") => [ '1600x1200@76', "31.5-94.0" , "50-160" ], ); -@vsyncranges = ("50-70", "50-90", "50-100", "40-150"); - -@hsyncranges = ( - "31.5", - "31.5-35.1", - "31.5, 35.5", - "31.5, 35.15, 35.5", - "31.5-37.9", - "31.5-48.5", - "31.5-57.0", - "31.5-64.3", - "31.5-79.0", - "31.5-82.0", - "31.5-88.0", - "31.5-94.0", +# * Screen/video card configuration. +%ramdacs = ( + __("No RAMDAC Setting (recommended)") => '', + __("AT&T 20C490 (S3 and AGX servers, ARK driver)"), => 'att20c490', + __("AT&T 20C498/21C498/22C498 (S3, autodetected)"), => 'att20c498', + __("AT&T 20C409/20C499 (S3, autodetected)"), => 'att20c409', + __("AT&T 20C505 (S3)"), => 'att20c505', + __("BrookTree BT481 (AGX)"), => 'bt481', + __("BrookTree BT482 (AGX)"), => 'bt482', + __("BrookTree BT485/9485 (S3)"), => 'bt485', + __("Sierra SC15025 (S3, AGX)"), => 'sc15025', + __("S3 GenDAC (86C708) (autodetected)"), => 's3gendac', + __("S3 SDAC (86C716) (autodetected)"), => 's3_sdac', + __("STG-1700 (S3, autodetected)"), => 'stg1700', + __("STG-1703 (S3, autodetected)"), => 'stg1703', + __("TI 3020 (S3)"), => 'ti3020', + __("TI 3025 (S3, autodetected)"), => 'ti3025', + __("TI 3026 (S3, autodetected)"), => 'ti3026', + __("IBM RGB 514 (S3, autodetected)"), => 'ibm_rgb514', + __("IBM RGB 524 (S3, autodetected)"), => 'ibm_rgb524', + __("IBM RGB 525 (S3, autodetected)"), => 'ibm_rgb525', + __("IBM RGB 526 (S3)"), => 'ibm_rgb526', + __("IBM RGB 528 (S3, autodetected)"), => 'ibm_rgb528', + __("ICS5342 (S3, ARK)"), => 'ics5342', + __("ICS5341 (W32)"), => 'ics5341', + __("IC Works w30C516 ZoomDac (ARK)"), => 'zoomdac', + __("Normal DAC"), => 'normal', ); -%min_hsync4wres = ( - 640 => 31.5, - 800 => 35.1, - 1024 => 35.5, - 1152 => 44.0, - 1280 => 51.0, - 1600 => 75.0, +@clockchip_name = ( + __("No Clockchip Setting (recommended)") => '', + __("Chrontel 8391") => 'ch8391', + __("ICD2061A and compatibles (ICS9161A => DCS2824)") => 'icd2061a', + __("ICS2595") => 'ics2595', + __("ICS5342 (similar to SDAC, but not completely compatible)") => 'ics5342', + __("ICS5341") => 'ics5341', + __("S3 GenDAC (86C708) and ICS5300 (autodetected)") => 's3gendac', + __("S3 SDAC (86C716)") => 's3_sdac', + __("STG 1703 (autodetected)") => 'stg1703', + __("Sierra SC11412") => 'sc11412', + __("TI 3025 (autodetected)") => 'ti3025', + __("TI 3026 (autodetected)") => 'ti3026', + __("IBM RGB 51x/52x (autodetected)") => 'ibm_rgb5xx', ); -%lines = ( -#- 'Cirrus Logic|GD 5446' => [ ' Option "no_bitblt"' ], - 'Silicon Integrated Systems [SiS]|86C326' => [ qq( Option "noaccel"\n Option "sw_cursor") ], -#- 'Trident Microsystems|Cyber 9525' => [ ' Option "noaccel"' ], -#- 'S3 Inc.|86c368 [Trio 3D/2X]' => [ ' ChipID 0x8a10' ], -); -#- most usefull server options have to be accessible at the beginning, since -#- no more than a small set of options will be available for the user, maybe ? -@options = ( - [ 'power_saver', 'Mono', '.*' ], - [ 'hibit_low', 'VGA16', 'Tseng.*ET4000' ], - [ 'hibit_high', 'VGA16', 'Tseng.*ET4000' ], - [ 'power_saver', 'VGA16', '.*' ], - [ 'noaccel', 'SVGA', 'Cirrus|C&T|SiS|Oak|Western Digital|Alliance|Trident|Tseng' ], - [ 'no_accel', 'SVGA', 'ARK|MGA|i740|Oak|ET6000|W32|Media.*GX|Neomagic' ], - [ 'linear', 'SVGA', 'Cirrus|ET6000|ET4000/W32p rev [CD]|Oak|Neomagic|Triden|Tseng' ], - [ 'nolinear', 'SVGA', 'Cirrus|C&T|Trident' ], - [ 'no_linear', 'SVGA', 'ARK|SiS|Neomagic|Tseng' ], - [ 'no_bitblt', 'SVGA', 'Cirrus|C&T|SiS' ], - [ 'no_imageblt', 'SVGA', 'Cirrus|C&T|SiS' ], - [ 'sw_cursor', 'SVGA', '.*' ], - [ 'slow_dram', 'SVGA', 'Cirrus|Trident|ET6000|W32|Western Digital|Tseng' ], - [ 'mga_sdram', 'SVGA', 'MGA' ], - [ 'no_pixmap_cache', 'SVGA', 'ARK|Cirrus|C&T|MGA|SiS|Trident.*9440|Trident.*9680|Tseng' ], - [ 'no_mmio', 'SVGA', 'Cirrus|Neomagic|Trident' ], - [ 'pci_burst_off', 'SVGA', 'ET6000|W32|Trident|Tseng' ], - [ 'hw_clocks', 'SVGA', 'SiS|C&T' ], - [ 'use_modeline', 'SVGA', 'C&T' ], - [ 'enable_bitblt', 'SVGA', 'Oak' ], - [ 'w32_interleave_off', 'SVGA', 'ET6000|W32|Tseng' ], - [ 'fifo_conservative', 'SVGA', 'Cirrus|ARK|SiS|Oak' ], - [ 'fifo_moderate', 'SVGA', 'Cirrus|ARK|SiS' ], - [ 'all_wait', 'SVGA', 'Oak' ], - [ 'one_wait', 'SVGA', 'Oak' ], - [ 'first_wait', 'SVGA', 'Oak' ], - [ 'first_wwait', 'SVGA', 'Oak' ], - [ 'write_wait', 'SVGA', 'Oak' ], - [ 'read_wait', 'SVGA', 'Oak' ], - [ 'clgd6225_lcd', 'SVGA', 'Cirrus' ], - [ 'fix_panel_size', 'SVGA', 'C&T' ], - [ 'lcd_center', 'SVGA', 'C&T|Neomagic|Trident' ], - [ 'cyber_shadow', 'SVGA', 'Trident' ], - [ 'STN', 'SVGA', 'C&T' ], - [ 'no_stretch', 'SVGA', 'C&T|Cirrus|Neomagic|Trident' ], - [ 'no_prog_lcd_mode_regs', 'SVGA', 'Neomagic' ], - [ 'prog_lcd_mode_stretch', 'SVGA', 'Neomagic' ], - [ 'suspend_hack', 'SVGA', 'C&T' ], - [ 'use_18bit_bus', 'SVGA', 'C&T' ], - [ 'hibit_low', 'SVGA', 'Tseng.*ET4000' ], - [ 'hibit_high', 'SVGA', 'Tseng.*ET4000' ], - [ 'probe_clocks', 'SVGA', 'Cirrus' ], - [ 'power_saver', 'SVGA', '.*' ], - [ 'use_vlck1', 'SVGA', 'C&T' ], - [ 'sgram', 'SVGA', 'i740' ], - [ 'sdram', 'SVGA', 'i740' ], - [ 'no_2mb_banksel', 'SVGA', 'Cirrus' ], - [ 'tgui_pci_read_on', 'SVGA', 'Trident' ], - [ 'tgui_pci_write_on', 'SVGA', 'Trident' ], - [ 'no_program_clocks', 'SVGA', 'Trident' ], - [ 'mmio', 'SVGA', 'Cirrus|C&T|Neomagic' ], - [ 'sync_on_green', 'SVGA', 'C&T|MGA' ], - [ 'pci_retry', 'SVGA', 'Tseng|MGA|Cirrus' ], - [ 'hw_cursor', 'SVGA', 'C&T|SiS|ARK|ET6000|i740|Tseng' ], - [ 'xaa_no_color_exp', 'SVGA', 'C&T|Cirrus|Trident|Tseng' ], - [ 'xaa_benchmarks', 'SVGA', 'C&T' ], - [ 'pci_burst_on', 'SVGA', 'Trident|Tseng' ], - [ 'prog_lcd_mode_regs', 'SVGA', 'Neomagic' ], - [ 'no_prog_lcd_mode_stretch', 'SVGA', 'Neomagic' ], - [ 'no_wait', 'SVGA', 'Oak' ], - #- [ 'med_dram', 'SVGA', 'Cirrus|Trident|Western Digital' ], #- WARNING, MAY DAMAGE CARD - #- [ 'fast_dram', 'SVGA', 'C&T|Cirrus|ET[46]000|Trident|Western Digital' ], #- WARNING, MAY DAMAGE CARD - #- [ 'fast_vram', 'SVGA', 'SiS' ], #- WARNING, MAY DAMAGE CARD - #- [ 'clock_50', 'SVGA', 'Oak' ], #- WARNING, MAY DAMAGE CARD - #- [ 'clock_66', 'SVGA', 'Oak' ], #- WARNING, MAY DAMAGE CARD - #- [ 'fifo_aggressive', 'SVGA', 'Cirrus|ARK|SiS|Oak' ], #- WARNING, MAY DAMAGE CARD - #- [ 'override_validate_mode', 'SVGA', 'Neomagic' ], #- WARNING, MAY DAMAGE CARD - #- [ 'tgui_mclk_66', 'SVGA', 'Trident' ], #- WARNING, MAY DAMAGE CARD - #- [ 'favour_bitblt', 'SVGA', 'Cirrus' ], #- OBSELETE - [ 'sw_cursor', '3DLabs', '.*' ], - [ 'no_pixmap_cache', '3DLabs', '.*' ], - [ 'no_accel', '3DLabs', '.*' ], - [ 'firegl_3000', '3DLabs', '.*' ], - [ 'sync_on_green', '3DLabs', '.*' ], - [ 'pci_retry', '3DLabs', '.*' ], - #- [ 'overclock_mem', '3DLabs', '.*' ], #- WARNING, MAY DAMAGE CARD - [ 'dac_8_bit', 'I128', '.*' ], - [ 'no_accel', 'I128', '.*' ], - [ 'sync_on_green', 'I128', '.*' ], - [ 'composite', 'Mach32', '.*' ], - [ 'sw_cursor', 'Mach32', '.*' ], - [ 'dac_8_bit', 'Mach32', '.*' ], - [ 'ast_mach32', 'Mach32', '.*' ], - [ 'intel_gx', 'Mach32', '.*' ], - [ 'no_linear', 'Mach32', '.*' ], - [ 'sw_cursor', 'Mach64', '.*' ], - [ 'nolinear', 'Mach64', '.*' ], - [ 'no_block_write', 'Mach64', '.*' ], - [ 'block_write', 'Mach64', '.*' ], - [ 'fifo_conservative', 'Mach64', '.*' ], - [ 'no_font_cache', 'Mach64', '.*' ], - [ 'no_pixmap_cache', 'Mach64', '.*' ], - [ 'composite', 'Mach64', '.*' ], - [ 'power_saver', 'Mach64', '.*' ], - [ 'no_program_clocks', 'Mach64', '.*' ], - [ 'no_bios_clocks', 'Mach64', '.*' ], - [ 'dac_6_bit', 'Mach64', '.*' ], - [ 'dac_8_bit', 'Mach64', '.*' ], - [ 'hw_cursor', 'Mach64', '.*' ], - #- [ 'override_bios', 'Mach64', '.*' ], #- WARNING, MAY DAMAGE CARD - [ 'sw_cursor', 'P9000', '.*' ], - [ 'noaccel', 'P9000', '.*' ], - [ 'sync_on_green', 'P9000', '.*' ], - [ 'vram_128', 'P9000', '.*' ], - [ 'nolinear', 'S3', '.*' ], - [ 'dac_8_bit', 'S3', '.*' ], - [ 'slow_vram', 'S3', 'S3.*964' ], - [ 'stb_pegasus', 'S3', 'S3.*928' ], - [ 'SPEA_Mercury', 'S3', 'S3.*(928|964)' ], - [ 'number_nine', 'S3', 'S3.*(864|928)' ], - [ 'lcd_center', 'S3', 'S3.*Aurora64V' ], - [ 'noaccel', 'S3V', '.*' ], - [ 'slow_edodram', 'S3V', '.*' ], - [ 'pci_burst_on', 'S3V', '.*' ], - [ 'early_ras_precharge', 'S3V', '.*' ], - [ 'late_ras_precharge', 'S3V', '.*' ], - [ 'fifo_conservative', 'S3V', '.*' ], - [ 'fifo_aggressive', 'S3V', '.*' ], - [ 'fifo_moderate', 'S3V', '.*' ], - [ 'lcd_center', 'S3V', 'S3.*ViRGE\/MX' ], - [ 'hw_cursor', 'S3V', '.*' ], - [ 'pci_retry', 'S3V', '.*' ], - [ 'dac_6_bit', 'AGX', '.*' ], - [ 'dac_8_bit', 'AGX', '.*' ], - [ 'sync_on_green', 'AGX', '.*' ], - [ '8_bit_bus', 'AGX', '.*' ], - [ 'wait_state', 'AGX', '.*' ], - [ 'no_wait_state', 'AGX', '.*' ], - [ 'noaccel', 'AGX', '.*' ], - [ 'crtc_delay', 'AGX', '.*' ], - [ 'fifo_conserv', 'AGX', '.*' ], - [ 'fifo_aggressive', 'AGX', '.*' ], - [ 'fifo_moderate', 'AGX', '.*' ], - [ 'vram_delay_latch', 'AGX', '.*' ], - [ 'vram_delay_ras', 'AGX', '.*' ], - [ 'vram_extend_ras', 'AGX', '.*' ], - [ 'slow_dram', 'AGX', '.*' ], - [ 'slow_vram', 'AGX', '.*' ], - [ 'med_dram', 'AGX', '.*' ], - [ 'med_vram', 'AGX', '.*' ], - [ 'fast_dram', 'AGX', '.*' ], - [ 'fast_vram', 'AGX', '.*' ], - [ 'engine_delay', 'AGX', '.*' ], - [ 'vram_128', 'AGX', '.*' ], - [ 'vram_256', 'AGX', '.*' ], - [ 'refresh_20', 'AGX', '.*' ], - [ 'refresh_25', 'AGX', '.*' ], - [ 'screen_refresh', 'AGX', '.*' ], - [ 'vlb_a', 'AGX', '.*' ], - [ 'vlb_b', 'AGX', '.*' ], - [ 'slow_dram', 'W32', '.*' ], - [ 'pci_burst_off', 'W32', '.*' ], - [ 'w32_interleave_off', 'W32', '.*' ], - [ 'no_accel', 'W32', '.*' ], - [ 'nolinear', '8514', '.*' ], - [ 'sw_cursor', '8514', '.*' ], - [ 'no_block_write', '8514', '.*' ], - [ 'block_write', '8514', '.*' ], - [ 'fifo_conservative', '8514', '.*' ], - [ 'no_font_cache', '8514', '.*' ], - [ 'no_pixmap_cache', '8514', '.*' ], - [ 'composite', '8514', '.*' ], - [ 'power_saver', '8514', '.*' ], - [ 'power_saver', 'FBDev', '.*' ], -); -%xkb_options = ( - 'ru(winkeys)' => [ 'XkbVariant "winkeys"', 'XkbOptions "grp:caps_toggle"' ], - 'jp' => [ 'XkbModel "jp106"' ], -); -$XF86firstchunk_text = q( -# File generated by XFdrake. + + + + + + + + + + +$intro_text = " +This program will create a basic XF86Config file, based on menu selections you make. + +The XF86Config file usually resides in /usr/X11R6/lib/X11 or /etc/X11. A +sample XF86Config file is supplied with XFree86; it is configured for a +standard VGA card and monitor with 640x480 resolution. + +You can either take the sample XF86Config as a base and edit it for your +configuration, or let this program produce a base XF86Config file for your +configuration and fine-tune it. Refer to /usr/X11R6/lib/X11/doc/README.Config +for a detailed overview of the configuration process. + +For accelerated servers (including accelerated drivers in the SVGA server), +there are many chipset and card-specific options and settings. This program +does not know about these. On some configurations some of these settings must +be specified. Refer to the server man pages and chipset-specific READMEs. + +Before continuing with this program, make sure you know the chipset and +amount of video memory on your video card. SuperProbe can help with this. +It is also helpful if you know what server you want to run."; + +$finalcomment_text = " +configuration file has been written. Take a look at it before running 'startx'. +Note that the XF86Config file must be in one of the directories searched by the +server (e.g. /etc/X11/XF86Config) in order to be used. Within the server press +ctrl, alt and '+' simultaneously to cycle video resolutions. Pressing ctrl, alt +and backspace simultaneously immediately exits the server (use if the monitor +doesn't sync for a particular mode). + +For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config. +"; + +$s3_comment = ' +# Use Option "nolinear" if the server doesn\'t start up correctly +# (this avoids the linear framebuffer probe). If that fails try +# option \"nomemaccess\". +# +# Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page. +'; + +$cirrus_comment = ' +# Use Option \"no_bitblt\" if you have graphics problems. If that fails +# try Option \"noaccel\". +# Refer to /usr/X11R6/lib/doc/README.cirrus. +# To allow linear addressing, uncomment the Option line and the +# address that the card maps the framebuffer to. +'; + +$probeonlywarning_text = ' +It is possible that the hardware detection routines in the server some how +cause the system to crash and the screen to remain blank. If this is the +case, skip this step the next time. The server may need a +Ramdac, ClockChip or special option (e.g. "nolinear" for S3) to probe +and start-up correctly. +'; + +$monitorintro_text = __(' +Now we want to set the specifications of the monitor. The two critical +parameters are the vertical refresh rate, which is the rate at which the +the whole screen is refreshed, and most importantly the horizontal sync rate, +which is the rate at which scanlines are displayed. + +The valid range for horizontal sync and vertical sync should be documented +in the manual of your monitor. If in doubt, check the monitor database +/usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there. +'); + +$hsyncintro_text = __(' +You must indicate the horizontal sync range of your monitor. You can either +select one of the predefined ranges below that correspond to industry- +standard monitor types, or give a specific range. + +It is VERY IMPORTANT that you do not specify a monitor type with a horizontal +sync range that is beyond the capabilities of your monitor. If in doubt, +choose a conservative setting. +'); + +$vsyncintro_text = __(' +You must indicate the vertical sync range of your monitor. You can either +select one of the predefined ranges below that correspond to industry- +standard monitor types, or give a specific range. For interlaced modes, +the number that counts is the high one (e.g. 87 Hz rather than 43 Hz). +'); + +$XF86firstchunk_text = ' +# File generated by XConfigurator. # ********************************************************************** -# Refer to the XF86Config(4/5) man page for details about the format of +# Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** +# ********************************************************************** +# Files section. This allows default font and rgb paths to be set +# ********************************************************************** + Section "Files" +# The location of the RGB database. Note, this is the name of the +# file minus the extension (like ".txt" or ".db"). There is normally +# no need to change the default. + RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) -# By default, Mandrake 6.0 and later now use a font server independent of +# By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" @@ -360,7 +215,7 @@ EndSection Section "ServerFlags" - # Uncomment this to cause a core dump at the spot where a signal is + # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals @@ -373,18 +228,12 @@ Section "ServerFlags" # sequences. This allows clients to receive these key events. #DontZoom - # This allows the server to start up even if the - # mouse device can't be opened/initialised. - AllowMouseOpenFail -); - -$XF86firstchunk_text2 = q( EndSection # ********************************************************************** # Input devices # ********************************************************************** -); +'; $keyboardsection_start = ' # ********************************************************************** @@ -399,90 +248,29 @@ Section "Keyboard" # following line #Protocol "Xqueue" - AutoRepeat 250 30 + AutoRepeat 500 5 - # Let the server do the NumLock processing. This should only be + # Let the server do the NumLock processing. This should only be # required when using pre-R6 clients #ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) - #Xleds "1 2 3" + #Xleds 1 2 3 - #To set the LeftAlt to Meta, RightAlt key to ModeShift, + #To set the LeftAlt to Meta, RightAlt key to ModeShift, #RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta - RightAlt Meta - ScrollLock Compose - RightCtl Control - -# To disable the XKEYBOARD extension, uncomment XkbDisable. - -# XkbDisable '; -$keyboardsection_start_v4 = ' -# ********************************************************************** -# Keyboard section -# ********************************************************************** - -Section "InputDevice" +$keyboardsection_part2 = ' + ScrollLock Compose + RightCtl Control - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "250 30" -'; +# To disable the XKEYBOARD extension, uncomment XkbDisable. -if (arch() =~ /^sparc/) { - $keyboardsection_part3 = ' -# To customise the XKB settings to suit your keyboard, modify the -# lines below (which are the defaults). For example: -# XkbModel "type6" -# If you have a SUN keyboard, you may use: -# XkbModel "sun" -# -# Then to change the language, change the Layout setting. -# For example, a german layout can be obtained with: -# XkbLayout "de" -# or: -# XkbLayout "de" -# XkbVariant "nodeadkeys" -# -# If you\'d like to switch the positions of your capslock and -# control keys, use: -# XkbOptions "ctrl:swapcaps" +# XkbDisable -# These are the default XKB settings for XFree86 on SUN: -# XkbRules "sun" -# XkbModel "type5_unix" -# XkbLayout "us" -# XkbCompat "compat/complete" -# XkbTypes "types/complete" -# XkbKeycodes "sun(type5)" -# XkbGeometry "sun(type5)" -# XkbSymbols "sun/us(sun5)" - - XkbRules "sun" - XkbModel "sun" - XkbLayout "us" - XkbCompat "compat/complete" - XkbTypes "types/complete" - XkbKeycodes "sun(type5)" - XkbGeometry "sun(type5)" - XkbSymbols "sun/us(sun5)" -'; -$keyboardsection_part3_v4 = ' - Option "XkbRules" "sun" - Option "XkbModel" "sun" - Option "XkbLayout" "us" - Option "XkbCompat" "compat/complete" - Option "XkbTypes" "types/complete" - Option "XkbKeycodes" "sun(type5)" - Option "XkbGeometry" "sun(type5)" - Option "XkbSymbols" "sun/us(sun5)" -'; -} else { -$keyboardsection_part3 = ' # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: @@ -508,26 +296,20 @@ $keyboardsection_part3 = ' # XkbVariant "" # XkbOptions "" - XkbKeycodes "xfree86" - XkbTypes "default" - XkbCompat "default" - XkbSymbols "us(pc105)" - XkbGeometry "pc" - XkbRules "xfree86" - XkbModel "pc105" -'; - -$keyboardsection_part3_v4 = ' - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" + XkbKeycodes "xfree86" + XkbTypes "default" + XkbCompat "default" + XkbSymbols "us(pc101)" + XkbGeometry "pc" + XkbRules "xfree86" + XkbModel "pc101" '; -} $keyboardsection_end = ' EndSection '; -$pointersection_text = ' +$pointersection_text1 = ' # ********************************************************************** # Pointer section # ********************************************************************** @@ -535,15 +317,20 @@ $pointersection_text = ' Section "Pointer" '; -$pointersection_text_v4 = ' -# ********************************************************************** -# Pointer section -# ********************************************************************** +$pointersection_text2 = ' + +# When using XQUEUE, comment out the above two lines, and uncomment +# the following line. -Section "InputDevice" +# Protocol "Xqueue" - Identifier "Mouse1" - Driver "mouse" +# Baudrate and SampleRate are only for some Logitech mice + +# BaudRate 9600 +# SampleRate 150 + +# Emulate3Buttons is an option for 2-button Microsoft mice +# Emulate3Timeout is the timeout in milliseconds (default is 50ms) '; $monitorsection_text1 = ' @@ -699,9 +486,9 @@ Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VS # 1280x1024 @ 100 Hz, 107.16 kHz hsync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync -# 1800x1440 @ 64Hz, 96.15 kHz hsync +# 1800x1440 @ 64Hz, 96.15 kHz hsync ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync -# 1800x1440 @ 70Hz, 104.52 kHz hsync +# 1800x1440 @ 70Hz, 104.52 kHz hsync ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # 512x384 @ 78 Hz, 31.50 kHz hsync @@ -741,23 +528,21 @@ $devicesection_text = ' # Graphics device section # ********************************************************************** +# Any number of graphics device sections may be present + Section "Device" - Identifier "Generic VGA" + Identifier "Generic VGA" + VendorName "Unknown" + BoardName "Unknown" Chipset "generic" -EndSection -'; +# VideoRam 256 -$devicesection_text_v4 = ' -# ********************************************************************** -# Graphics device section -# ********************************************************************** +# Clocks 25.2 28.3 -Section "Device" - Identifier "Generic VGA" - Driver "vga" EndSection +# Device configured by Xconfigurator: '; $screensection_text1 = ' |