This commit was manufactured by cvs2svn to create branchtopic/v_webmin_0_87

'v_webmin_0_87'.

18 files changed, 0 insertions, 2362 deletions

diff --git a/docs/.cvsignore b/docs/.cvsignore
deleted file mode 100644
index a0593a470..000000000
--- a/docs/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pictures
diff --git a/docs/BUGS b/docs/BUGS
deleted file mode 100644
index 1d154fcf1..000000000
--- a/docs/BUGS
+++ /dev/null
@@ -1,10 +0,0 @@
-doInstallStep: if there's not enough room, error, but packages are marked installed :(
-
-when you click directly on setupFilesystems and you have scsi, you're fucked.
-Even if you go to setupSCSI, you won't be able to have partitions again.
-
-bug non reproductible:
-- /etc/passwd is empty after `root passwd' stage :(
-- reboot at the end of package installation with a lot of error messages from
-gtk about the progressbar
-
diff --git a/docs/COPYING b/docs/COPYING
deleted file mode 100644
index 60549be51..000000000
--- a/docs/COPYING
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/docs/HACKING b/docs/HACKING
deleted file mode 100644
index fb3c8cf49..000000000
--- a/docs/HACKING
+++ /dev/null
@@ -1,122 +0,0 @@
--=-=--
-DrakX is a very big project, and it needs special setups to work.
-The purpose of this file is to explain how you can setup your box to make it
-compile and run.
--=-=--
-
-Beware, don't try this on a production machine with important data.
-
-
---------------------------------------------------------------------------
-Sources installation:
-
-  First grab the gi.tar.bz2 archive and untar it in your home directory,
-for example from DrakX-*.src.rpm on your Mandrake Linux distribution.
-
-cd to gi
-for i in `du -a | grep CVS/Root | cut -f 2`
-do
-  sed -e 's/prigaux/anoncvs/' $i > $i.tmp
-  mv $i.tmp $i
-done
-
-Then, log yourself into the cvs:
-% export CVS_RSH=ssh
-% export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-% cvs checkout gi
-	(passwd: 'cvs')
-And update the gi package:
-cvs update -P -d
-
-
---------------------------------------------------------------------------
-Preparing the compilation process:
-
-(1) target directory
-
-create a /export directory and copy a recent Mandrake Linux CD in there.
-(You don't have to put have all the RPMS...) ; you'll need roughly 1.5
-Gbytes for a full install.
-
-[gc@obiwan ~/cvs/gi] su -c "mkdir /export"
-
-
-(2) devel packages
-
-you need quite a few devel packages to run the stuff; roughly: gcc, make,
-glibc-devel, perl-devel, XFree86-devel, libglib-devel, libgtk+-devel,
-perl-GTK, ldetect*, libslang-devel, libnewt-devel, e2fsprogs, dosfstools,
-rpm-devel, popt-devel, rpmtools.
-
-
-(3) sudo
-
-never build or run DrakX as root; install package sudo, and set up
-relevant permissions; the following should be enough: (in your
-/etc/sudoers)
-
-gc ALL=(root) NOPASSWD:/usr/bin/patch,NOPASSWD:/bin/rpm,NOPASSWD:/bin/mount,NOPASSWD:/bin/cp,NOPASSWD:/bin/umount,NOPASSWD:/usr/bin/install,NOPASSWD:/bin/rm,NOPASSWD:/bin/mv,NOPASSWD:/bin/tar,NOPASSWD:/bin/cpio,NOPASSWD:/bin/chown,NOPASSWD:/bin/mkdir,NOPASSWD:/usr/bin/strip
-
-
-(4) boot kernel
-
-you need one or more kernels and (all?) their modules. it's located in
-subdirectory "all.kernels" in DrakX-*.src.rpm ; if you ever grab (or
-build) another boot kernel, replace or add an entry in "all.kernels" as:
-
-	(a) create your modules subdir (useful to describe the
-            VERSION_RELEASE) and untar your kernel
-
-[gc@obiwan ~/cvs/gi/all.kernels] mkdir 2.4.1-BOOTcustom
-[gc@obiwan ~/cvs/gi/all.kernels] cd 2.4.1-BOOTcustom
-[gc@obiwan ~/cvs/gi/all.kernels/2.4.1-BOOTcustom] tar jxvf ~/mycustomkernel.tar.bz2
-[gc@obiwan ~/cvs/gi/all.kernels/2.4.1-BOOTcustom] ls
-boot/  cardmgr/  lib/
-
-	(c) build kernel/modules stuff for stage1 and stage2
-[gc@obiwan ~/cvs/gi] ./update_kernel
-
-
-(5) pray
-
-[gc@obiwan ~/cvs/gi] make
-
-
----------------------------------------------------------------------------
-The comments written with #- are automatically stripped out at install.
-
-
----------------------------------------------------------------------------
-testing all:
-
-  go to the perl-install directory and execute ./g_auto_install --test
-
-  You should be able to test the whole thing in a non-destructive way.
-
-NEVER compile and/or execute DrakX as root!
-
-
-
-
-Here is how I (dams) made it work on my computer.
--------------------------------------------------
-
-- get the sources
-- install the librairies needed included newt-devel gtk+-devel popt-devel popt gtk-engines
-- cd path/to/gi
-- make
-- mkdir /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/themes /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/step-* /usr/share
-- ln -s path/to/gi/perl-install/share/help.xpm /usr/share
-- ln -s path/to/gi/perl-install/share/isdn* /etc/sysconfdir/network-scripts
-- have a cd architecture linked on /export
-- ln -s /export /tmp/rhimage
-- export PERL_INSTALL_TEST=1
-- cd path/to/gi/perl-install
-- gendistrib --noclean --distrib /export
-- ./install2 in root (dangerous) or chmod a+r /dev/hd* and ./install2 in user
-
-
-
-address all bugreports to dave@null.com
diff --git a/docs/README b/docs/README
deleted file mode 100644
index 08d5613cc..000000000
--- a/docs/README
+++ /dev/null
@@ -1,366 +0,0 @@
-Well here is a little description of what DrakX needs to work in comparison
-to the RH newt install.
-
-********************************************************************************
-* CVS **************************************************************************
-********************************************************************************
-Like all good free software, DrakX is in CVS :)
-
-You can access it at http://www.mandrakelinux.com/cgi-bin/cvsweb.cgi/gi
-
-or via
-
-export CVS_RSH=ssh
-export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-cvs checkout gi
- (enter password 'cvs')
-
-
-This is only read-only access. If you want more, tell me (pixel@mandrakesoft.com)
-
-Alas, all is not in CVS as a lot of things are binary files.
-For the other things, take SRPMS/DrakX-*.src.rpm
-
-Please note that redoing *all* the stuff is not for the faint of heart. I myself
-sometimes wonder what the whole make does :-%
-Instead, changing some .pm files is quite easy (nice interpreted language)
-
-********************************************************************************
-* Making your custom install ***************************************************
-********************************************************************************
-If you have your own rpms you want to add, or make your own updated cdrom, you
-just have to issue:
-
-% gendistrib --noclean --distrib <DIRS>
-
-Where <DIRS> is the root of all the media that the install will see, this first
-one is the main one :
-
-(1) network or 1-cdrom installs
-	DIRS == the root directory of the Distribution
-
-(2) multi-cdrom install
-	DIRS == the root directories of all the media that the install will see
-
-``gendistrib'' will scan the file Mandrake/base/hdlists in the main root
-directory (the first one in DIRS) to search for all media used. Typically you
-use Mandrake/RPMS* for RPM packages repository.
-For multi-cd, please use Mandrake/RPMS or Mandrake/RPMS1, Mandrake/RPMS2, etc.
-For one CD or a network/hd volume, please use Mandrake/RPMS.
-
-Optionnally, you can modify ``Mandrake/base/rpmsrate''; this file manages
-the relative importance of the files, and thus their installation or not.
-
-Also, mdkinst_stage2.gz must be remade if you modify files in Mandrake/mdkinst.
-See below for information about these files.
-
-********************************************************************************
-* FILES ************************************************************************
-********************************************************************************
-First here are the different things needed :
-
-Mandrake/base/hdlists
-	description of the available install media.
-	format is one line for one medium as
-		<hdlist_name> <rpms_directory> <description>
-	<hdlist_name> should be match regexp /hdlist\S*.cz2?/
-	for example (two cd install) you get
-		hdlist1.cz	Mandrake/RPMS1	Boot CD
-		hdlist2.cz	Mandrake/RPMS2	Extension CD
-
-Mandrake/base/hdlist*.cz
-	table of rpm's headers, referred by ``hdlists''
-	their contents can be listed using ``packdrake -l <hdlist_file>'' or
-	or ``parsehdlist <hdlist_file>''.
-	! Need to be remade when Mandrake/RPMS* changes (with ``gendistrib'') !
-
-Mandrake/base/depslist.ordered
-	for each packages, tell which package it depends on. Also contains the
-	size for some (obscure) bloody reasons.
-	! Need to be remade when Mandrake/RPMS* changes !
-	(with ``gendistrib --noclean --distrib .'')
-
-Mandrake/base/compss
-	obsoletes comps. It store packages in different categories, generated
-	from the %{GROUP} field
-	! Need to be remade when Mandrake/RPMS* changes !
-	(with ``gendistrib --noclean --distrib .'')
-
-Mandrake/base/rpmsrate
-	ranks and classify packages, so that the installer will know which
-        ones to install. format is :
-		<intern_group>
-			<level> <packages>
-	where <intern_group> is a symbolic name used in Mandrake/base/compssUsers* files,
-	and <level> defines importance level as described below :
-		5	must have
-		4	important
-		3	very nice
-		2	nice
-		1	maybe
-	by default (for non expert), group selects packages for level 4 (important)
-	and 5 (must have). export mode add 3 (very nice) level. other level (below 2)
-	can only be selected using individual package selection.
-
-Mandrake/mdkinst
-	live system used on certain installs. See ``Ramdisk or not'' below for
-	more.
-
-Mandrake/base/mdkinst_stage2.bz2
-	for the ramdisk. live sytem in ext2 filesystem bzipped2.
-	generated from Mandrake/mdkinst tree using misc/make_mdkinst_stage2
-	See ``Ramdisk or not'' below for more.
-
-Mandrake/base/rescue_stage2.bz2
-	rescue ramdisk. live sytem in ext2 filesystem bzipped2.
-	this is the ramdisk loaded when typing rescue on boot prompt.
-	there is no live system available, only the ramdisk is used.
-
-images/*.img
-	boot images to use with DrakX. Use:
-	- cdrom for cdrom install
-	- network for ftp/nfs install (non-pcmcia devices)
-	- hd for hard-disk install
-	- pcmcia for pcmcia install (see ``PCMCIA install'' below for more)
-
-	the following modules have been removed from:
-          network.img: acenic sk98lin de4x5
-          cdrom.img and hd.img: BusLogic seagate fdomain g_NCR5380 dc395x_trm tmscsim
-          hd.img: dpt_i2o eata eata_pio eata_dma
-          cdrom.img: aztcd gscd isp16 mcd mcdx optcd cm206 sjcd 
-          pcmcia.img: apa1480_cb
-	they are now in "other.img", 
-
-	blank.img is a blank boot image without a kernel nor initrd. this image
-	can be used to generate custom boot disk.
-
-	if you think one of those modules is used a lot, tell me, i may find some room
-	to put it back on the main floppies.
-
-
-********************************************************************************
-* logs *************************************************************************
-********************************************************************************
-During install, a lot of interesting stuff can be found in different places:
-in consoles and in files. To switch to console 2 for example, do Ctrl-Alt-F2
-from the X install.
-- alt-F1: the stdout of the install. Not very interesting stuff
-- alt-F2: simple shell. Quite a lot of commands are available but as they are
-written in perl (for space), they do not handle the very same options as normal.
-After install, you can do ``chroot /mnt'' to see your system just like after
-rebooting. ``rpm -qa'' works for example.
-- alt-F3: a lot of interesting things. Be carefull, some ``ERROR'' messages are
-not interesting.
-- alt-F4: kernel's place. aka the output of dmesg.
-- alt-F7: the graphical install lives there
-
-- command "bug" puts on floppy lots of interesting stuff.
-- /tmp/ddebug.log: same (or nearly the same) as alt-F3
-- /tmp/syslog: same as alt-F4
-- /mnt/root/ddebug.log: at the end of each step, DrakX tries to backup
-/tmp/ddebug.log to /mnt/root. Available only after mounting of /.
-- /mnt/root/install.log: the log of the installation (or upgrade) of the rpms
-(just like rpm's /mnt/tmp/(install|upgrade).log)
-- /mnt/root/auto_inst.cfg.pl: a kickstart file generated at the end of each
-step. Can be used in 2 ways: kickstart install or ``defcfg'' install. Hopefully
-you know about kickstart. ``defcfg'' is a way to customize the default values in
-install. For example, French can be the default language with a qwerty keyboard,
-the auto-partitionning partitions can be changed, the default user class can be
-set to developer (!)...
-
-********************************************************************************
-* po translation files *********************************************************
-********************************************************************************
-DrakX uses .po files for its translation. A script takes the different
-strings out of the .pm files. It generates the DrakX.pot file which contains
-all the english strings to translate.
-To add a new language, you just have to add it to lang.pm (if it's not there
-already) and put the .po in the perl-install/po directory (see ``Ramdisk or
-not'' to know if you have to regenerate the mdkinst_stage2.gz)
-
-********************************************************************************
-* PCMCIA install ***************************************************************
-********************************************************************************
-If the media you use to install is a pcmcia device, use the pcmcia boot disk.
-
-********************************************************************************
-* Ramdisk or not ***************************************************************
-********************************************************************************
-The DrakX install is much bigger than the newt one. So the ramdisk which was
-used is getting big, and costs a lot in memory 
-(eg: the mdkinst_stage2 is 14MB - 23/09/99)
-(update! now size is 21MB - 24/01/01)
-(update! now size is 19MB - 26/04/01)
-
-|       | newt    | DrakX
-|-------+---------+----------------------------------------------------------
-| nfs   | live    | live
-| ftp   | ramdisk | ramdisk
-| http  | ramdisk | ramdisk
-| hd    | ramdisk | live if Mandrake/mdkinst/usr/bin/runinstall2 is a link,
-|       |         |   ramdisk otherwise
-| cdrom | ramdisk | live if memory < 52MB, ramdisk otherwise
-
-Where ramdisk is needed, if detected memory is below the limit allowed for
-ramdisk (maintained in file gi/mdk-stage1/config-stage1.h; currently 52 Mb),
-a failure dialog will be printed explaining that there is not enough memory
-to perform the installation.
-
-When i say live, it means that the stage1 will *mount* the
-Mandrake/mdkinst and use it that way.
-
-The ramdisk is used in place of the live in some cases. This ramdisk is filled
-with mdkinst_stage2.gz
-
-For cdrom install, the ramdisk is used to speed up things (access time is quite
-high on cdrom drives)
-
-For pcmcia, it depends on the type of install.
-
-
-********************************************************************************
-* modules **********************************************************************
-********************************************************************************
-Modules can be found in at least 2 places:
-- in /modules/modules.mar
-- in /lib/modules.cz<KERNEL_VERSION_RELEASE>
-
-/modules/modules.mar is used in mdk-stage1. It contains only modules
-interesting for one kind of install. For example in an hd install, it
-contains scsi modules. For a network install, it contains network card
-modules. (To create, extract or view files in a ``mar'' archive, please
-use gi/mdk-stage1/mar/mar; this is basically an archive format meant to
-be minimalistic)
-
-/lib/modules.cz<KERNEL_VERSION_RELEASE> contains all modules, it is used
-in stage2.
-
-
-To install a module, use modprobe which is in /usr/bin. It's a perl wrapper
-around /usr/bin/insmod. It uses the dependencies found in
-/modules/modules.dep (stage1).
-
-/usr/bin/insmod is a wrapper around /usr/bin/insmod_. It just extracts the
-module out of /lib/modules.cz in /tmp. Then it calls insmod_.
-
-/usr/bin/insmod_ is the real prog (which you usually find in /sbin/). You need
-to give it the complete path.
-
-********************************************************************************
-* Making screenshots ***********************************************************
-********************************************************************************
-On a test machine, make a network install, switch to console (ctrl-alt-F2), enter:
-% xhost+
-
-then, on another computer:
-% DISPLAY=test_machine:0 xwd -root | convert - screenshot.png
-
-********************************************************************************
-* Miscellaneous ****************************************************************
-********************************************************************************
->  o Media access methods: nfs, ftp, http, hd, cdrom
->  o Stages: init, stage1, stage2
->    - What exactly each stage does
-
-init loads stage1
-stage1 loads stage2, on various medium type
-
-stage2 is too big to fit on a floppy, that's why stage1 exists
-
->    - How each stage relates to the various media access methods
-
-stage1 knows only how to access to the media is compiled for. It contains only
-the kernel modules needed for that media. For eg, the nfs/ftp/http stage1
-doesn't contain scsi modules nor ide.
-
->    - How one stage terminates and another begins. i.e., How does
->      stage1 find, mount, and launch stage2?
-
-/sbin/init just starts /sbin/stage1
-/sbin/stage1 takes care of mounting stage2 (in ramdisk if necessary)
-  then it runs /usr/bin/runinstall2
-
->  o Text and Graphic mode installers
->    - Architectural overview of each
-
-have a look at gi/docs/object_class.fig
-
-
-********************************************************************************
-* OEM **************************************************************************
-********************************************************************************
-> I am a system OEM in Bangalore,India selling systems bundled with
-> Mandrake Linux. The problem is that with every system I sell, I need to
-> install & configure the system which takes HOURS!. Can I do a diskcopy
-> instead?
-> 
-> Please Help. This is a major bottleneck for  me.
-
-many solutions:
-
-- make an install on drive hdb, then :
-      dd if=/dev/hdb of=/dev/hdc
-  but you should make sure the hardware is *REALLY* identical.
-
-- try the oem feature
-   3. - burn a cd out of *latest* cooker or 8.0 and above.
-      - boot on it telling "oem" to syslinux
-      !! it will destroy every data on the harddrive or
-         resize (or use free space) if *ONLY* one fat partition is defined !!
-      - you now have a very automated install matrix 
-      (duplicate it with "dd if=/dev/hdb of=/dev/hdc bs=1M count=730")
-
-    put the harddrive in the oem box, the user will now have an *very* automated
-    install, just asking the root password and user password, and some other
-    question according its hardware.
-
-   4. just like 3. but you may have to mount /cdrom after typing rescue on
-      syslinux prompt (oem script do it automatically if a automatic boot nfs
-      network has been done as server is known). under /cdrom may be anything
-      as long as it provides an installation tree of Mandrake Linux.
-      after that run oem script by typing "/etc/oem -f" for normal installation
-      or "/etc/oem -f server" for server installation (normal with server installed).
-
-   5. (just like 3. without burning a cd, doing the first part by hand)
-      have a look at the /etc/oem script on the rescue and do it by hand...
-
-
-cu Pixel, fpons.
-
-
-comments:
-1. maybe copy unnecessary things -> take too long
-   solution -> use bs=8k count=xxxx 
-2. kernel_reread can be found on the new rescue, source is also at end of this
-mail. This solution works with one partition. Can be easily enhanced to many
-primary partitions... For extended partitions, more complicated, but not much :)
-3. has just been added in latest cooker. It may still have some pb. The main
-current limitation is IDE only, though it can be fixed easily for special cases.
-
---------------------------------------------------------------------------------
-#include <stdio.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-
-void die(char *msg)
-{
-  perror(msg);
-  exit(1);
-}
-
-void kernel_read(char *dev)
-{
-  int fd;
-  if ((fd = open(dev, O_RDONLY)) == -1) die("can't open device");
-  ioctl(fd, BLKRRPART, 0);
-  close(fd);
-}
-
-int main(int argc, char **argv) 
-{
-  if (argc != 2) {
-    fprintf(stderr, "usage: kernel_read_part <hard drive device>\n");
-    exit(1);
-  }
-  kernel_read(argv[1]);
-}
diff --git a/docs/README.devel b/docs/README.devel
deleted file mode 100644
index 0244557ba..000000000
--- a/docs/README.devel
+++ /dev/null
@@ -1,252 +0,0 @@
-Well here is a little description of how DrakX can be modified or extended.
-Please refer to README file for getting DrakX code source and to known more
-exactly how it works and what it can do.
-
-
-********************************************************************************
-* Execution of DrakX ***********************************************************
-********************************************************************************
-DrakX has originally be written by pixel in perl and C.
-entry point for stage2 is /usr/bin/runinstall2 which is typically a link to
-/usr/bin/install2 which simply load module install2.pm and execute
-install2::main with @ARGV.
-
-install2::main parse command line arguments, prepare installation, find the right
-install_interactive class (take a look at gi/docs/object_class.fig) according to
-command line, memory available and if the interactive chosen is initializing
-correctly, else it will try a less-demanding interactive object.
-Once done, $::o is set to this install & interactive object and main runs the
-various step of install2 defined in $o->{steps}, starting with $o->{steps}{first}
-and iterating with method install_any::getNextStep().
-while running step, it trap any errors that may arise and use perl exception to
-change step.
-
-********************************************************************************
-* DrakX modules descriptions ***************************************************
-********************************************************************************
-Here is a brief description of what each modules of DrakX is doing.
-
-install2: main module of DrakX as described above, main loop execution of DrakX.
-
-install_steps: generic installation module containing steps definition, all steps
-  should always be defined here as some methods may be used on automatic mode.
-  there is no interactivity available. typically are defined base operation for
-  configuring each step according to $o.
-
-install_steps_interactive: generic installation module with generic interative
-  methods. typically are found all interactive code of DrakX for each steps.
-
-install_steps_auto_install: implementation installation module without interactive
-  methods to match auto_install mode. this is the simplest as almost no method are
-  redefined (inherit module install_steps only, compared to other implementation
-  modules described below).
-
-install_steps_stdio: implementation installation module with interactive stdio
-  methods to match stdio mode. inherit modules install_steps_interactive and
-  interactive_stdio.
-
-install_steps_newt: implementation installation module with interactive newt
-  methods to match newt mode. inherit modules install_steps_interactive and
-  interactive_newt.
-
-install_steps_gtk: implementation installation module with interactive gtk
-  methods to match gtk mode. inherit modules install_steps_interactive and
-  interactive_gtk.
-
-install_any: contains various methods using generic interactive interface but
-  not used by standalone tools.
-
-install_gtk: contains various methods using gtk interface but not used by
-  standalone tools.
-
-interactive_stdio: implementation methods for interactivity in stdio mode.
-  inherit module interactive.
-
-interactive_newt: implementation methods for interactivity in newt mode.
-  inherit module interactive.
-
-interactive_gtk: implementation methods for interactivity in gtk mode.
-  inherit module interactive.
-
-my_gtk: basic gtk access methods.
-
-any: contains various methods using generic interactive interface. to compare
-  against install_any module as this one is available for standalone tools.
-
-class_discard: simple module that implement every methods undefined to return
-  nothing. this trick is used to ensure no undefined method can arise when using
-  code that reference interactive method which are not defined.
-
-common: contains very simple and very usefull (common) methods to do various task.
-  some methods inspired by functionnal language.
-
-c: contains wrapper to C definition of methods used by DrakX, use of C is necessary
-  for C extern libraries interface (rpmlib, ldetect), kernel interface, XFree
-  interface.
-
-commands: implement some un*x commands, conflicting name with perl contains
-  trailing underscore (_). this module is used by commands perl script that
-  determine which command to run according to $0 (this is used this way when DrakX
-  is running).
-
-run_program: allow running a program with redirection but without using a shell.
-  allow rooted execution.
-
-help: contains all help message displayed by DrakX.
-
-log: log facility methods.
-
-lang: language manipulation methods, get and set sysconfig file, load po.
-
-keyboard: keyboard manipulation methods, get and set sysconfig file, set console
-  keyboard mapping.
-
-mouse: mouse manipulation methods, get and set sysconfig file, change mouse.
-
-timezone: time zone manipulation methods, get and set timezone.
-
-services: services manipulation methods, activate or delete services (see
-  /etc/rc.d/init.d directories).
-
-detect_devices: manage detection of various class of hardware.
-
-devices: manage device file, create device special according device name.
-
-partition_table: base partition table management methods, it manages
-  appriopriate partition_table_XXX object according to what has been read
-  as XXX partition table type.
-
-partition_table_raw: generic class for the following partition_table_XXX.
-
-partition_table_emtpy: matches an empty partition table.
-
-partition_table_dos: matches a DOS partition table.
-
-partition_table_bsd: matches a BSD partition table.
-
-partition_table_mac: matches an Apple partition table.
-
-partition_table_sun: matches a Sun Label partition table.
-
-fs: read and write /etc/fstab file, mount and umount, format.
-
-fsedit: manage (modyfy, edit) mount point associated to partition (like editing
-  /etc/fstab).
-
-swap: swap management methods, format and mount (activation).
-
-raid: raid (software only) management methods.
-
-lvm: lvm (Logical Volume Manager) management methods.
-
-loopback: loopback management methods, used for lnx4win type installation or using
-  a file as a partition.
-
-diskdrake: diskdrake itself, disk graphical (using gtk) manipulation tools.
-
-ftp: ftp mangement methods, used when using ftp install.
-
-http: http management methods, used when using http install.
-
-modparm: kernel modules options management, allow building nice dialog with each
-  module parameter available.
-
-modules: kernel modules management, allow loading or unloading (ala modprobe or
-  insmod).
-
-printer: printer management methods, read and write both LPR or CUPS configuration.
-
-printerdrake: interactive printer management methods.
-
-network: network management methods, get and set sysconfig file.
-
-netconnect: network configuration wizard.
-
-netconnect_const: network configuration wirard data.
-
-Xconfig: X configuration (monitor + already existing config file) management.
-
-Xconfigurator: X configuration wizard.
-
-Xconfigurator_const: X configuration wizard data.
-
-booloader: bootloader (LILO, GRUB, LOADLIN, SILO) configuration management methods.
-
-pkgs: rpm package and hdlist, depslist management methods, allow selecting or
-  unselecting packages, manage rpmsrate file and select group, installation and
-  removal methods of rpm file.
-
-crypto: *obsoleted* module to manage crypto site and rpm file.
-
-standalone: standalone only, allow defining a standalone tools.
-
-bootlook: standalone only, interface with DrakConf to configure bootloader options.
-
-tinyfirewall: standalone only, interface with DrakConf to configure a tiny firewall.
-
-********************************************************************************
-* DrakX FAT resizer module description *****************************************
-********************************************************************************
-here is a fat resizer written in perl and C used by DrakX (diskdrake) to resize
-FAT16/FAT32 partition. it moves clusters to make sure a shrink can be done on the
-limit of the partition itself, if no cluster need to be moved, only boot sector
-partition limit are modified.
-
-any: various methods to flag cluster, compute min size.
-
-boot_sector: boot sector management methods.
-
-c_rewritten: originally resize_fat was only perl, this contains code section that
-  are the most sensible to speed or memory contraints and have been rewritten to C
-  using perl extension.
-
-dir_entry: manage directory structure.
-
-directory: traverse directory recursively, needed to move correctly cluster.
-
-fat: manage fat structure.
-
-info_sector: manage info sector.
-
-io: manage I/O on disk (need to take care of big file as partition size may be
-  larger than 2GB).
-
-main: main resizer algortihm. if needed allocate new clusters, copy files, copy
-  directories. update boot sector info.
-
-********************************************************************************
-* Adding a new step to DrakX ***************************************************
-********************************************************************************
-Say we want to add a question for setting "alawindows" option.
-We put it pretty early in the install, let's say after "Select Installation
-Class".
-
-1. in install2.pm
-
-add
-
-  selectAlawindows => [ __("A la windows or not"), 0, 1, '' ],
-
-after
-
-  selectInstallClass => [ __("Select installation class"), 1, 1, '' ],
-
-the 0, 1, '' means not "redoable", "skip on error", "don't hide"
-
-2. add your function selectAlawindows in install2.pm
-
-sub selectAlawindows  { $o->selectAlawindows }
-
-3. add your function selectAlawindows in install_steps_interactive.pm
-
-sub selectAlawindows {
-    my ($o) = @_;
-    $o->{alawindows} = $o->ask_yesorno('', _("Throw everything away as windobe does?"), 1);
-}
-
-4. add your function selectAlawindows in install_steps.pm (not needed in that
-case, except for auto_install)
-
-sub selectAlawindows  {}
-
-
diff --git a/docs/README.pxe b/docs/README.pxe
deleted file mode 100644
index 14115369a..000000000
--- a/docs/README.pxe
+++ /dev/null
@@ -1,142 +0,0 @@
-Here is a short description to configure a PXE server using dhcpd and tftpd.
-This allows a network boot for your ethernet card conforming to the Interl
-PXE specification.
-
-********************************************************************************
-**********                       General overview                   ************
-********************************************************************************
-
-You need a dhcp server and a tftp server on one or two machines to allow the 
-network boot. We are not using a PXE server to achieve this as it is not
-mandatory. 
-You can install tftp-server and dhcp-server package from the Mandrake
-distribution for example.
-
-On the server machine at 192.168.2.1, you will find a "/etc/dhcpd.conf" sample
-file written by Florin Grad <florin@mandrakesoft.com>, where "mydomain.com" is
-assumed to be your domain name, and 192.168.1.1 a name server. All install are
-done on subnet 192.168.2.0.
-
-All the files that will be downloaded by the tftp daemon are located under 
-"/tftpboot" :
-  "/tftpboot/pxelinux.0" is a program that is loaded directly by the machine
-                         where a network boot will be done, this program comes
-                         from the SYSLINUX package by H. Peter Anvin. (look at
-                         http://syslinux.zytor.com/pxe.php for more information)
-  "/tftpboot/pxelinux.cfg/" is a directory where all configuration file for
-                         pxelinux.0 will be found, pxelinux.0 will download
-                         these file by itself. It searches first for a file
-                         named accordind to the machine IP address in
-			 hexadecimal, for example for 192.168.2.20, it
-			 looks for "C0A80214" first, then "C0A8021" and so
-			 on down to "C0", "C" and "default".
-  "/tftpboot/network.rdz" is the standard network initrd for Mandrake installation.
-  "/tftpboot/vmlinuz"    is the boot kernel for installation.
-  "/tftpboot/help.msg"   is the message displayed by pxelinux.0, note that currently
-                         graphical message (as for install using SYSLINUX 1.48 with
-                         graphic patch by Mandrake) is not supported.
-
-All file "network.rdz", "vmlinuz", "help.msg" can be found by mounting "network.img",
-or the network floppy disk used for install, "pxelinux.cfg" is just an adaptation
-of the file found on the "network.img" called "syslinux.cfg" but without the reference
-to boot.msg (as it is not currently supported).
-
-Update network configuration for your needs and start dhcp server on the machine and
-tftp server and this should work.
-
-********************************************************************************
-* /etc/dhcpd.conf **************************************************************
-********************************************************************************
-ddns-update-style ad-hoc;
-
-authoritative;
-
-option space PXE;
-option PXE.mtftp-ip code 1 = ip-address;
-option PXE.mtftp-cport code 2 = unsigned integer 16;
-option PXE.mtftp-sport code 3 = unsigned integer 16;
-option PXE.mtftp-tmout code 4 = unsigned integer 8;
-option PXE.mtftp-delay code 5 = unsigned integer 8;
-option PXE.discovery-control code 6 = unsigned integer 8;
-option PXE.discovery-mcast-addr code 7 = ip-address;
-
-default-lease-time 28800;
-max-lease-time 86400;
-
-option domain-name "mydomain.com";
-option domain-name-servers 192.168.1.1;
-
-class "PXE" {
-  match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
-  option vendor-class-identifier "PXEClient";
-
-  vendor-option-space PXE;
-  option PXE.mtftp-ip 0.0.0.0;
-  next-server 192.168.2.1; #tftp server location
-
-  filename "pxelinux.0";          # standard TFTP
-
-}
-
-shared-network "mynetwork" {
-  subnet 192.168.2.0 netmask 255.255.255.0 {
-    option subnet-mask 255.255.255.0;
-    option routers 192.168.2.1;
-
-    ddns-domainname = "mydomain.com";
-
-    pool {
-      range 192.168.2.10 192.168.2.20;
-      allow members of "PXE";
-    }
-  } 
-}
-********************************************************************************
-* /tftpboot/pxelinux.cfg/default ***********************************************
-********************************************************************************
-default linux
-prompt 1
-timeout 72
-display help.msg
-label linux
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=788
-label vgalo
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=785
-label vgahi
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=791
-label vga16
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga16
-label text
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 text
-label patch
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 patch vga=788
-label expert
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 expert vga=788
-label rescue
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 rescue rw
-label lnx4win
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 lnx4win vga=788
-label preinst
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz automatic=method:cdrom root=/dev/ram3 rescue oem rw
-label oem
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz automatic=method:cdrom root=/dev/ram3 rescue oem rw
-label auto
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  auto_install=Mandrake/base/auto_inst.cfg.pl
-********************************************************************************
-* Usefull linkst ***************************************************************
-********************************************************************************
-
-http://syslinux.zytor.com/pxe.php
-http://www.kano.org.uk/projects/pxe/
diff --git a/docs/SHORTCUTS b/docs/SHORTCUTS
deleted file mode 100644
index bc8325625..000000000
--- a/docs/SHORTCUTS
+++ /dev/null
@@ -1,49 +0,0 @@
-********************************************************************************
-main shortcuts
-
-F11 -> previous step
-F12 -> next (reachable) step
-
-********************************************************************************
-diskdrake
-
-taken directly from diskdrake.pm:
-
-		"a" => \&Active,
-		"b" => \&Move,
-		"c" => \&Create,
-		"d" => \&Delete,
-		"f" => \&Format,
-		"m" => \&Mount_point,
-		"M" => \&Mount,
-		"n" => \&Create,
-		"o" => \&ReadFromFile,
-		"s" => \&SaveInFile,
-		"q" => \&Exit,
-		"r" => \&Resize,
-		"t" => \&Type,
-		"u" => \&Unmount,
-		"w" => \&WritePartitions,
-		"W" => \&WriteFstab,
-
-hopefully it is explicit enough :)
-
-********************************************************************************
-list choice
-
-- acceleration a la windows (default): enter a letter and the selection will move to the
-first entry beginning with that letter. If you enter another letter it will try
-to find the entry beginning with the 2 letters you have given. In case it fails
-the starting_word is reset.
-- incremental search a la emacs: searches trough the list
-
-Use control-s to use incremental search and then to search next occurence
-
-********************************************************************************
-in case of complete mouse sh**t
-
-XFree86 provides a way of moving the mouse pointer:
-- first, press Ctrl-Shift-NumLock
-- then move the pointer with the keypad arrows
-- press button is ``0'' (aka Inser)
-- release button is ``.'' (aka Suppr)
diff --git a/docs/TODO b/docs/TODO
deleted file mode 100644
index cb9399f82..000000000
--- a/docs/TODO
+++ /dev/null
@@ -1,515 +0,0 @@
--URGENT---------------------------------------------------------------------------------
-check for fpons/pixel BOTH that resize_fat is clean for current version
-relative to 7.0-2.
-
-heavy testing of diskdrake to avoid corrupting partition table, current version
-should be available to fix bogus partition table, writing enabled only when
-partition is Ok (fixme? allow primary partition inside extended one, but with
-warning on diskdrake startup, made them as warning ?).
-
--features-------------------------------------------------------------------------------
-add rpmdrake in menu
-
-(7.1 or later) clean SCSI CDROM autoboot.
-(done,gc,8.0) stage1 & cdrom: add ability in expert to choose the scsi cdrom drive to use
-
-(7.1)better help for partitioning in newbie
-
-(7.1)Improved network configuration (PPP and/or Ethernet)
-PPPoE install and configuration (SuSE includes it, DHCP-like)
-(7.1)standalone applications for configuration (netdrake, timetool, authentificationconf, soundcard)
-
-----
-(7.2) replace normal with standard (in the installClass's)
-
-(7.2 or later)horizontal sub-steps
-
-(7.2 or later)diskdrake in text mode
-
-ask "do you have SCSI?" before asking "probe PCI or not"
-
-(?) paride in stage1
-(done,gc,8.0) stage1 & network: add ability to choose the network interface to use
-
-(?) msec custom
-
-(?)firewall configuration (instant firewalling?)
-
-(?)widget for displaying fdisk (dindinx)
-add fdisk using the zvt widget (taken in gnome-libs)
-
-(?)help in some configuration files.
-
-ability to add nfs/weird_fs entries in fstab
-
-size of packages in crypto
-
--to test--------------------------------------------------------------------------------
-what's lseek64?
-
-ensure installClass is set to something in auto install.
-
-for axp, swriteboot -f1 if swriteboot failed.
-axp with swap part sigsegv
-
-tree for choosing monitors (buggy?)
-
-what happens if a module fails to insmod (scsi step), in beginner/normal/expert
-
-fstab must be sorted (/usr/local after /usr)
-
-RAID upgrades
-
-add choice clean /tmp or not in expert
-
-kernel chosen by default must be the one according to supermount/secure
-
-bug if ide-scsi, no more hdX, but scd0 (aka sr0)
- (and add alias block-major-11 ide-scsi ?)
-
-check on update for conf.modules and modules.conf !
-
-with /usr, /usr/local and /usr/local/e mount points i get an error at step mounting local filesystems
-
--easy fixes-----------------------------------------------------------------------------
-rpmdrake proposition for cdrom labels
-
-use option nocheck to mount for upgrades
-
--fixes needing thinking-----------------------------------------------------------------
-bug: changing mem= in miscellaneous doesn't modify lilo conf if you backtrack
-
-ask network configuration only if NIC found?
-
-configure DHCP for newbies if ethernet & DHCP card available
-
-xvidtune like screen configuration (see SuSE's yast)
-
-live cdrom for alpha (sparc?)
-
-network boot
-
-get the error when getting/reading .rpm files fail
-better timeout handling for network installs
-
-handle not enough room for update
-(fpons)verify the free space is big enough.
-
-the XFdrake test does not handle the fontset
-
-> Here I go into the printer configuration select 'HP Deskjet 722C Colour',
-> print a test ASCII page, pressing 'No' when prompted to indicate the page did
-> not print OK and then hitting cancel when prompted to choose a printer type
-> again.
-> ask_from_list cancel at /usr/lib/libDrakX/my_gtk.pm line 504.
-
-diskdrake: take from parted mklabel, hide(?)
-
-bug in kde desktop if keeps home but not an upgrade
-	
-bug in users: mandrake user is added twice in strange installs
-(mixed of security 0 + ???)
-
-bugs rpmdrake: 
-- just after installing a package, switch to `Installed', the package has wrong name
-- refresh the kde desktop after package installation in rpmdrake
-(restart kpanel)
-- rpmdrake and same name packages
-
-urpmi: pb if XXX-devel requires XXX = 1.2.3 and we updgrade XXX-1.2.3
-
-bug in defcfg in with lang=fr_FR, display is buggy
-
-bug keyboard focus: after switch in console at Xconfig step
-
-
-
--to look at--------------------------------------------------------------------------
-adduserdrake to remove/update users
-
-(???)free provider auto configuration facility (to be discussed).
-auto ppp-configure with free provider
-
-(?)on laptop, configure the MMU to use swap not very often
-
-(?)checkboxes in groups based on compssList (and availableSpace?)
-
-(?)see what can be done with nvram (50 bytes to save information)
-
-better wacom support
-
-(fpons)bug: CANON BJC 4X00 do not work with current rhs-printfilters
-  (work with magicfilters (debian))
-  (should be handled by ghostscript BJC600's driver)
-
-(pix)install text on mem=8M, mem=16M?
-
-(pix)kickstart
-partitioning? raid?
-X configuration and bootloader in kickstart
-
-XFdrake chooseResolutions with ask_from_list do not permit ``Show all''
-
-(?) options in mkfs, progress bar when formatting
-
-(?) when some error occurs, partition must be unset isFormatted
-
--hardware-------------------------------------------------------------------------------
-- with no floppy drive, mkbootdisk step fails badly
-- with bad floppy or write protected, mkbootdisk doesn't say anything
-- try detect_devices::floppies (and how are scsi floppies handled?)
-maybe: do a iotcl FDGETPRM to detect fd1, fd0.
-
-need a simple solution to precise mouse type (syslinux option?)
-
-ELSA Gloria has bad ddc info
-
-token ring is tr0 not eth0
-
-I have Mandrake 6.1  installed and working on a ThinkPad 770.
-To enable the PCMCIA Token ring I have to append the following line to
-/etc/pcmcia/config.opts
-module "ibmtr_cs" opts "mmiobase=0xd2000 srambase=0xd4000"
-
-smp not detected (mhoward@memphisonline.com on cooker, bios=BP6PW)
-
-UDMA66 (ultra66.o for promise)
-
-aha152x needs "insmod aha152x.o aha152x=0x140,11,7"
-
-(obsolete) usb module not removed if no mouse found
-
-(fpons)handle dat drives
-
-hibernation on laptop -> clock not restored
-
-# in 2.3.15 "Silicon Integrated Systems [SiS]|SiS900 10/100 Ethernet" is handled
-
-(?)enable the testing of the mouse type (under X) (wheel)
-possibility to specify the mouse
-
--(?)---------------------------------------------------------------------------------
-(?) handle NT (add entry for it in lilo, put it in fstab)
-
-(?) lilo-0.22-19mdk is buggy with boot=/dev/hde & root=/dev/sda13, it needs
-disk=/dev/hde bios=0x80 & disk=/dev/sda bios=0x81
-
-(?)using setxkb, enable the testing of the keyboard
-
-(?)XFdrake does not handle fbdev
-
-(?) Je viens de faire une installation sur une machine où seul Be était
-installé. Je l'ai supprimé et installé (mode recommandé) Oxygen. Au
-redémarrage, le boot manager de Be apparaît et il est impossible de
-démarrer Linux.
-Pourquoi ne pas installer LILO si on supprime toutes les partitions ?
-
-(?)initrd in bzip2
-
-(?)smaller zsh (or ash in initrd)
-
-(?)is configureNetworkNet needed with dhcp/bootp?
-
-(?)bug in upgrade: install from hda1:/usr/local/blah with hda1:/
-
-(?)mandrake_desk was not installed while kdebase it there on upgrade
-
-(?)when clicking on X configuration, installation of packages is not displayed
-
-(?)maybe remove commented lines in /usr/lib/perl5/... files
-
-(?)timezone using a picture (pb: how to delimit zones)
-when asking GMT or not, display the time for each possibility
-the list is too big for USA
-
-(?)ability to select the type of install when booting of cdrom
-(?)use the ability of el torito to handle 2.88MB or more 
-
-(obsolete)lilo-deinstallation in case of lilo auto-installation for beginners
-
-(?)loadFont sucks
-
-(obsolete)trash on the screen when X first starts
-
-(?)remove the gray line surrounding the logo
-
-(?)cleanup /etc/services & /etc/protocols
-
-(?)strange: no scsi of type 'fd', only 'tape'
-
-(?)remount ro before X test.
-
-(?)remove every << and >> (doesn't handle > 32bits)
-
-
--done---------------------------------------------------------------------------------
-(7.1,done,fpons) improve printerdrake to at least have the same functionalities as printtool.
-
-(done,fpons)diskdrake can olverlap partitions (resize lower, resize original typically
-after clear all and auto allocate, try maximal size available).
-
-(done,fpons)rewrite mouseconfig in perl?
-
-(done,pix)kudzu or not in miscellaneous
-
-(done,pix)warn the user if not enough ram to fulfill install
-
-(done,fpons)test after printer config
-
-(done,pix)ask for more than the memory size detected
-
-(done,fpons)modem config
-
-(done,pix)call kudzu in batch to initialize its list
-
-(done,pix)standalone generator of mdkinst_stage2.gz
-
-(done,pix)text install
-
-(done,pix) if u choose mouse usb != found mouse, it fails at X config
-
-(done,pix) diskdrake bug: saved information on floppy contains isMounted.
-
-(done,pix) update devices.c from modules.pm
-
-(done,pix) in lilo.conf, put 
-disk=/dev/hdb
-  bios=0x80
-
-(done,pix) diskdrake
-auto_partitions
-suggested partition tables must be better foreach installClass
-
-(done,pix) update the list of modules (in update_kernel)
-
-(done,pix) language support: only choose the right locales and upmark the packages requiring it
-
-(done,pix) move security question before isntallation of packages
-
-(done,pix) install ssh
-
-(done,fpons,pix) change the boot message of syslinux (have something different from RedHat)
-
-(done,pix) install_steps.pm: 569 (128M + 3)
-
-(done,pix) bug: mouse freeze just before network configuration (mouse primax)
-  (was kudzu)
-
-(done,pix) signal 11 in stage1 nfs kickstart mount failed
-
-(done,pix) ask supermount or not, no supermount with kernel-secure
-
-(done,pix) fix bug in g_auto_install (can't go through all)
-
-(done,pix) bug: install from ciril.fr fails
-
-(done,pix)wizard for partitioning in case of one full vfat
-
-(done,dindinx)app for choosing drakxtools (drakxconf)
-(done,pix)verify being root
-(done,pix)log::l -> initlog
-
-(done,pix)install apmd for laptops (maybe not start apmd though)
-(done,pix)icewm apm (sh icewm_apm)
-(done,pix)kde apm (put Kapm.kdelnk in ~/Desktop/Autostart)
-
-(done,pix)bug in adduserdrake: missing pwconv in md5
-(done,pix)correct the default value of draksec (cp draksec)
-(done,pix)in draksec, (and maybe others) have --expert as default if /etc/sysconfig/system has TYPE=expert
-
-(done,pix)bug in XFdrake in install, cancel in choose Card do not close the window
-
-(done,pix)in XFdrake, testing should not overwrite /etc/X11/XF86Config
-
-(done,pix) hwiz and supermount and eject :(
-
-(done(replaced by msec's),pix) bug: usermod -G urpmi a not done (full install)
-
-(done,pix)perl and .ph's
-
-(done,pix) BUG bootp in network install sigsegv
-
-(done,pix) move the last done stuff before Xconfiguration if possible
-
-(done,pix)draksec is buggy, don't try security >= 4
-
-(done,pix)install apmd on laptops?? (maybe ask emcweb@btinernet.com (see alix))
-
-(done,pix)missing alias ll for root
-
-(done,pix)urpmi.addmedia:  |gzip instead of doing it afterwards
-
-(done,pix)locale (and fonts?) buggy in case ramdisk is used
-
-(done,pix)rpmdrake: Installed packages not in hdlist should be there
-
-(done)in ftp install, locale not installed properly
-
-(done,pix)pcmcia.img does not handle hd/cdrom
-
-(done,pix)cyrillic font buggy in DrakX
-
-(done,fred)remove xfs user from kdm
-
-(done,pix)bug with 2 cdrom drives (.kdelnk to there for 1st drive)
-
-(done,pix(works))test ramdisk stage2 and romanian
-
-(done,pix)kfmrc
-
-(done,pix)on laptop, default to 1024x768
-
-(done,pix)mkinitrd and deps
-
-(done,fred(removed the call))XFdrake and mousedrake freeze if lothar launches them
-
-(done,pix)crypto message
-
-(done,pix)test bug with lilo and windows (if not on mbr)
-
-(done,pix)removed icons come back later (kde desktop)
-
-(done,pix(was bug in upgrade reading old config))
-  segfault in linuxconf (adapter 1 empty)
-  (test with the sysconfig sent)
-
-(done,fpons)bug: Lrosqu'on effectue une mise à jour et que /etc/lilo.conf
-contient la variable « default » positionnée sur autre chose que
-« linux » ou « windows », DrakX est incapable de générer LILO.
-
-(done,fpons)bug: GeForce and hd.img?
-
-(done,fpons)for upgrade in expert, give choice of packages to install
-   choosing packages available in upgrade?
-
-(done,pix)rpmdrake: pb uninstalling package with dependencies (rpmdrake is killed?!) (as root too)
-
-(done,pix)noatime option for ext2 fs on laptops (do not wake up the hd)
-       Do  not  update  inode  access times on this
-       file system (e.g, for faster access  on  the
-       news spool to speed up news servers).
-
-(done,pix)kde's icons: 28 horiz and 25 vert grid for big icons
-
-(done,pix)bug: DrakConf don't follow the charset -> add setlocale(LC_ALL, "")
-(done,pix)for ko|ja|zh, gnome-terminal should point to rxvt (-CLE)
-(done,pix)group cdrom in /etc/group (gid=22)
-(done,pix)drakxtools should require urpmi
-(done,pix)bug: gdm unset LANG
-(done,pix) zip with automount -> ppa not autoloaded
-(done,pix)when you set the kde icons to Large, maybe it'd be good to chown the .kderc
-(done,pix)lilo in russian/japaneese is horrible
-(ok,pix)test ide burners
-(ok)test check bad blocks optional for mke2fs
-(done,pix)hd install: no umount is done at the end of install :(
-
-just before release:
-(done,pix)- mandrake_doc-xx, the symlink is no good in /usr/doc/mandrake as 
-(done,pix)- crypto dependencies to update
-(done,pix)- update kudzu's pcitable
-(done,pix)- update pcitable for 86C368 if 3.3.6 (and other S3 3D's)
-            ("ATI|3D Rage P/M Mobility AGP 2x" -> changed to Server:Mach64)
-
-(done,pix)with 2MB of video ram, chooses 8bpp instead of 16bpp
-
-(done,pix) replace
-	{ device => "loop7", type => 0x83, size => ((cat_('/dos/lnx4win/size.txt'))[0]*2048), mntpoint => "/", isFormatted => 1, isMounted => 1 },
-by
-	{ device => "loop7", type => 0x83, size => cat_('/dos/lnx4win/size.txt') * 2048, mntpoint => "/", isFormatted => 1, isMounted => 1 },
-
-(done,fpons)in ftp install, bug with X server install with wu-ftpd 2.6 (see http://www.wu-ftpd.org/broken-clients.html)
-
-(done,pix)ask package installation languages (must be put in RPM_INSTALL_LANG)
-
-(done,pix)bug (by dadou): Si la partition racine est trop petite pour installer le système, un
-message d'erreur apparaît pour signaler le problème (bien) mais on ne
-peut en sortir. La seule solution est de redémarrer.
-
-(obsolete)bug when selecting compssUsers, do not deselect after (if u deselect)
-
-(done,pix)detect ide burners and then add hdX=ide-scsi to kernel cmdline
-
-(done,pix)urpmi: handle many args on cmd-line
-
-(done,pix)fix any // in path to ftp server otherwise windobe server bug :(
-
-(done,pix)diskdrake and auto partitioning, may have the last creation of partition rejected,
-try to figure why?
-
-(done,pix)in chooseResolutions: display the graphic card found
-
-(done,pix)with pcmcia, need ONBOOT=no
-
-(fpons,done) XFree: handle by card options
-eg: SIS6326 needs "no_bitblt" "no_bltimage" and 24bpp instead of 32bpp
-
-(done,pix) Xconfiguration: if "can't open fixed font", relaunch xfs.
-
-(obsolete) pb with dependencies ``missing'': icewm do not require XFree86 and so you can have icewm but no X server
-
-(obsolete) bug in ext2resizing (no sparse superbloc, don't finish properly)
-
-(done,pix,7.1)manage a lot of language (ergonomic issue as it already exists)
-
-(done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ...
-
-(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
-
-(done,pix,7.1)partitioning, keyboard shortcut.
-
-(done,fpons,7.1)index/compress hdlist? (for multi-cd)
-! for multi-cd live is mandatory, small transaction are mandatory too.
-
-(done,pix,7.1?)loopback partitions (even root one)
-
-(done,pix)in ok_cancel, focus has 3 states, should be 2 (ask dindinx)
-
-(done,pix,7.1)Generally improved package selection /ergonmic issue.
-Tree -> CTree, ``all'' branch with all packages
-show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install)
-
-(done,pix)let diskdrake have dos/win partition automatically set up with mount point,
-this will help loopback too.
-
-(done,pix,7.1)grub
-
-(done,pix,7.1)feature missing: cancel installation
-
-(obsolete) bug in diskdrake: can in strange cases create a primary partition at sector #0
-
-(done,pix(partly, protection against bugging))bug in diskdrake:
-in expert: blank, create hda5 at beginning, create hda6 at the end, create hda7
-in the middle, remove the first one. Result hda5 at the end and bug.
-
-(obsolete) have a better time estimation of the remaining time in install packages
-
-(done,dindinx+pix)ask_many_from_list can't keyboard scroll
-
-(done,pix,7.1)individual package selection: double click is tiring...
-
-(done,fpons,7.1) sparc ehancement, avoid V7+ machine target (div and mul not in v7 standard)
-
-(done,fpons,7.1)syslinux in graphical mode to be improved for heavily bogus BIOSes.
-
-(done,pix)missing feature in lilo configuration: can't give hda2 with /boot/vmlinuz if
-already hda1 with /boot/vmlinuz
-
-(done,pix)in 640x480 install box is to small (cuz of 'Cancel' button beeing added)
-
-(done,pix)chooseGroup with individual alone
-
-(done)(7.1) rewrite crypto stuff
-(done)crypto: add a cancel & progress bar while downloading
-(done)error handling (like reading hdlist)
-(done)(7.1)progression bar on crypto.
-
-(done, daouda&pix,7.1, other persons)rescue: 
-- small modification for stage1 to get the rescue stage2
-- create a stage2 with many tools (fdisk, bash...)
-the rescue could be on another cd (if multi-cd)
-! care must be taken about modules (if ide is in module...)
-
-(done,7.1)install in 800x600
-- need handling of both 640x480 (mostly for VGA16) and 800x600
-
-(done,NEED 7.1) auto-install for corporate, very important (need consolidation).
diff --git a/docs/advocacy b/docs/advocacy
deleted file mode 100644
index 9e7f00b6b..000000000
--- a/docs/advocacy
+++ /dev/null
@@ -1,87 +0,0 @@
-a little DrakX history:
-
-june 1999: 
-  i start rewriting redhat's install in perl, partly for the fun of it. I'm
-  still working for the army
-
-5 july 1999: 
-  i start full time job at mandrakesoft. But we don't have many computers and i
-  must share the accounting computer with Merieme who is working half-time. No
-  test machine (i test on others box, and destroyed Jacques partitions once),
-  guess how it slows things down?
-
-august 1999: 
-  at last computers, even test one
-  first DrakX version which can install things, very very rough
-
-september 1999: 
-  a friend of mine help me 2 weeks on DrakX relayed by Francois
-
-november 1999:
-  first released version of DrakX (goldpack). Not really stable yet.
-
-january 2000:
-  7.0 is out, with a DrakX quite stable
-
-july 2000: 
-  dams starts working on draknet
-
-mid-october -> mid-january 2000: 
-  gc rewrites the stage1 to win every kb we can 
-  -> size divided by 7 (!) for cdrom
-
-
-The DrakX team is also doing a lot of other things:
-- drakxtools
-- urpmi, early MandrakeUpdate, early rpmdrake...
-- Mandrake Control Center (new DrakConf)
-- packages maintenance/enhancing (esp. ghostscript, 3D-wrappers, lilo)
-- fixing core packages to make them installable
-- scoring packages, sorting them, flagging them... (compssList, rpmsrate)
-- reading/answering cooker and other MLs
-- helping non-perl gurus :)
-
-That doesn't give much. Me being the one more working on plain DrakX. It gives 2
-people working for 1.5 years. IMO it isn't ``spending an enormous amount of
-resources''.
-And what do you mean by ``compared to the code base size''??? DrakX is currently
-around 28K lines, which is big IMO. You can compare it with linuxconf which is
-170K lines. I think the achievement of DrakX is comparable (a 6 times code size
-win from dumb C++ to expressive perl is normal imo).
-
-
-Also it seems like we don't have the same understanding of the word
-"maintenance".
-DrakX functionalities have evolved *a lot* since the beginning:
-
-- hardware detection, configuration, debugging, work-arounding (multi-kernel installs...)
-- making things prettier
-  - more bitmaps
-  - "advanced" button
-  - syslinux graphical boot
-- making it work with latest versions of software (eg: switching to rpm4)
-- finding out the best way to use rpmlib
-- multi-cd
-- draknet: configuring every piece of stupid protocols
-- diskdrake: raid, loopback, LVM, resizing, checking stupid users entry
-- XFdrake: multi-mice, multi-heads, 3D-accel
-- porting to axp/sparc/ppc (with Stew's help)
-- always more i18n
-- keeping things small
-  - .cz format
-  - moving to .png
-  - getFile on demand from mdkinst for ramdisk installs
-
-[...]
-
-> You don't believe the books ? Count yourself; see the man/months spent
-> in 'pure' developoment in drakX, and the resources put in mantainance
-> of the code base; as far as i know, your count should confirm what the
-> books says; more probabily, you will discover that our numbers are
-> even worse.
-
-if you count enhancements, adding features... in maintenance, i confirm the
-numbers, and find them quite normal.
-
-if you only count bug fixing, the time would be much shorter (around 30%).
-
diff --git a/docs/advocacy-interactive b/docs/advocacy-interactive
deleted file mode 100644
index 99036008e..000000000
--- a/docs/advocacy-interactive
+++ /dev/null
@@ -1,60 +0,0 @@
-
-> > We already have some functional backends, frontends, that works great, and has
-> > not been thrown away since 1 year. We use it during install, post install, mcc
-> > and so.
-> 
-> But aren't generic enough.
-
-DrakX handles:
-- buttons
-- bool values (checkboxes)
-- ranges
-- entries
-- combo boxes (editable or not)
-- lists / radio boxes
-- tree lists
-- iconlist
-- wait messages
-
-Features:
-- all the entries above can be mixed
-- nice separation between data and displayed data (eg: choose in list of
-objects representing hda/hdb/... but displayed nicely with size...)
-- keyboard handled nicely in GTK frontend
-- callback on events:
- ok pressed => check before the dialog is hidden
- focus changed => 
-  * enables pre-setting things based on other entries
-  * value checking on the fly
-- simple/advance toggle 
-- shadowing of entries
-- tooltips
-- size of windows computed the best possible
-- perl-based
-
-Misfeatures:
-- display not flexible (though i don't know any of the tools we're talking
-about that is flexible => nice)
-- quite a few features are gtk only (simple/advance toggle, shadowing of
-entries, certain events, tooltips).
-- a stdio front-end exist but handle only certain entries. It would need a
-week-work to finish it
-- a http front-end could be done (mod-perl needed)
-- perl-based
-
-The DrakX frontend (called "interactive") could be moved out of DrakX.
-
-eg of use:
-
-<#part type="text/plain" filename="~/bin/perl/imessage" disposition=attachment>
-<#/part>
-
-[...]
-
-> > -provides a lot of frontends
-> 
-> And you ideally have to provide a frontend by widget set.
-
-nope. The interface is completly standardised, even if it include some
-gtk-like niceties. The *complete* newt (and not just entries and radioboxes
-like bus) binding takes 241 lines.
diff --git a/docs/comparisons b/docs/comparisons
deleted file mode 100644
index cdf95b33a..000000000
--- a/docs/comparisons
+++ /dev/null
@@ -1,51 +0,0 @@
-redhat 6.1 (fr?), install 766MB, df 900MB, 35min (asked for all groups except "everything")
-
-upgrade to redhat 6.2, sum 757MB, df 936MB, 20min
-
-mandrake 7.1, install 755MB, df 1091MB, 17min (asked install size 910MB), 515 packages
-
-upgrade to cooker, sum 1000MB, df 1404MB, 35min
-
-
-redhat 7.0b, install 815MB, df 960MB, 18min
-redhat 7.0, install 995MB, df MB, 26min
-
-7.2b, 3.3GB 2h26
-
-
-7.2b: (lang fr)
-compssLevel  df  rpm  	time  fs          df/time
-	               	     
-100          64   59  	0:59  ext2 500M   1.08
- 90         132  127  	1:50  ext2 500M   1.20
- 80         226  218  	3:26  ext2 500M	  1.10
- 70         449  387  	5:52  ext2 1G	  1.28
- 60         614  541  	8:36  ext2 1G	  1.19
- 50        1113  943   17:40  ext2 2G	  1.05
- 40        1193 1013   20:39  ext2 2G	  0.96
- 30        1262 1072   22:28  ext2 2G	  0.94
- 20        1445 1219   27:34  ext2 2G	  0.87
- 10        1649 1394   36:58  ext2 2G	  0.74
-  0        1943 1638   48:02  ext2 2G	  0.67
--10        2957 2519  101:49  ext2 4G 	  0.48
-
-7.2b: (lang all)
-compssLevel  df  rpm  	time  fs          df/time
-
-100          70   59  	1:04  ext2 500M   1.09
- 90         289  281  	4:20  ext2 500M	  1.11
- 80         373  361    5:41  ext2 500M	  1.09
- 70         890  794   13:28  ext2 1G	  1.10
-
-
-mem used 7.2cooker
-gtk:   runinstall2 13608(data 9572) + FBDev 2984(data 1544)
-newt:  runinstall2  9516(data 7528)
-stdio: runinstall2  9160(data 7372)
-
-8.0rc1: (lang fr)
-
-rpmsrate
-
-4   all       831   786   18:08   reiserfs 2G
-4   ()        175   139    3:25   reiserfs 2G
diff --git a/docs/diskdrake.TODO b/docs/diskdrake.TODO
deleted file mode 100644
index e6f2da038..000000000
--- a/docs/diskdrake.TODO
+++ /dev/null
@@ -1,23 +0,0 @@
-- test what windows can handle (the number of partitions)
-- better keyboard focus handling
-- end sector in Create
-- add warnings for scsi drives if you create more than sdx15
-- the information put in save/restore partitions must be cleaned
-(remove mounted/formatted/..., also remove the Data::Dumper dependency)
-- test, test, test
-- do not allow swap partitions above 2Gigs
-- wanting the first partition to be extended is not used
-- maybe warn if a mounted partition change of dev number
-- text version
-- better error handling (what to do if we find a bad partition table?)
-- display the information about the correspondance color2type
-- handle the partition labels (missing information here)
-- add comments in the code
-- add documentation
-- handle the `luke' case (main extended partition must be extended)
-- ability to batch actions (like chained moves)
-- add a verification after fdiskReadPartitionTable that the start_cyl,
-end_cyl... do correspond to start and start+size. For the moment, this
-information is just discarded :(
-This verif can't be done in fdiskReadPartitionTable as start is relative in
-extended partitions
diff --git a/docs/draknet_advanced_doc.txt b/docs/draknet_advanced_doc.txt
deleted file mode 100644
index a0c0c63e0..000000000
--- a/docs/draknet_advanced_doc.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-This document details the entry points you can call without the DrakX graohical
-toolkit. First, the general variables you will encounter further. If you don't
-know wht a variable is, look here. Any additional locally variables are
-commented 'in place'
-
-------------------------------
-Special types (in upper cases)
-------------------------------
- DB_FILE : file storing the ISDN ISP database. see share/isdndb.txt : file of lines in 'Unlisted - edit manually' or /^(.*)\|(.*)\|(.*)=>([0-9]*)=>(.*)=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/ where $1=Land $2=City $3=ISP_name $4=phone_number $5=hostname $6=dns1 $7=dns2
-
----------------------------------------------------------------------------------------
-Summary of common variables used (local variables are described in the function itself)
----------------------------------------------------------------------------------------
-notation : keys : description : type : format (regexp or enumeration. `...' means it's not exhaustive
- $prefix : prefix path (empty in post-install) : string : path
- $isLaptop : flag for laptop : boolean or int : guess
- $isdn : hash table containing isdn infos
-  $isdn->{login} : cnx login : string
-  $isdn->{passwd} : cnx passwd : string
-  $isdn->{phone_in} : user phone : /^[0-9]*$/
-  $isdn->{phone_out} : ISP phone : /^[0-9]*$/
-  $isdn->{dialing_mode} : dialing mode : "auto" or "manual"
-  $isdn->{driver} : driver used for the card : "hisax" or "b1pci" or ...
-  $isdn->{type} : type of card, used for the driver, see netconnect_consts : integer : /^[1-22]|[24-37]$/
-  $isdn->{irq} : irq of the ISA card : integer |
-  $isdn->{mem} : mem of the ISA card : string  |
-  $isdn->{io} : io of the ISA card : string    | see netconnect_consts for examples.
-  $isdn->{io0} : io0 of the ISA card : string  |
-  $isdn->{io1} : i01 of the ISA card : string  |
-  $isdn->{idl} : amount of time after the cnx times out in secs : int
-  $isdn->{user_name} : not used anymore. Not explicit. It represented the name of the connexion.
-  $isdn->{card_type} : card type : string : "isa" or "pci" or "pcmcia"
-  $isdn->{protocol} : cnx protocol : int : 1|2|3 : 1 for old german specific (not used anymore), 2 for europe, 3 for rest of the world
-  $isdn->{id} : card id. Associated with vendor, identify strictly the card. see pcitable : integer
-  $isdn->{description} : card description from pcitable : string
-  $isdn->{vendor} : card vendor : integer
-  $isdn->{passwd2} : passwd verification : string
- $modem : hash table containing modem infos
-  $modem->{device} : device of the modem : string : /ttyS[0-9]/
- $adsl : hash table containing modem infos
-  $adsl->{login} : cnx login : string
-  $adsl->{passwd} : cnx passwd : string
-  $adsl->{atboot} : 
- $netc : hash table containing system-wide networking infos (maybe not true, correct this) : 
-  $netc->{NET_DEVICE}
-  $netc->{dnsServer2}
-  $netc->{dnsServer3}
-  $netc->{DOMAINNAME2}
-  $netc->{NET_INTERFACE} is set to "ppp0"
- $in : interactive object
-
-------------
-Entry points
-------------
-
-isdn_write_config_backend : write isdn info, only for ippp0 -> ask_connect_now
-input :
- $prefix
- $isdn
-$isdn input:
- $isdn->{login} $isdn->{passwd} $isdn->{phone_in} $isdn->{phone_out} $isdn->{dialing_mode}
- $isdn->{driver} $isdn->{type} $isdn->{irq} $isdn->{mem} $isdn->{io} $isdn->{io0} $isdn->{io1}
-
-write_secret_backend : write login and passwd into /etc/ppp/{chap, pap}-secrets. Replace old passwd only if same login
-input :
- $a : login : string : /^.*$/
- $b : passwd : string : /^.*$/
-
-connect_backend : launch the cnx script
-input : $prefix
-
-connect_backend : launch the cnx script
-input : $prefix
-
-read_providers_backend : build the tree of isdn ISP
-input :
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-output : the list of ISP : array of strings : array of /^(.*)\|(.*)\|(.*)$/ where $1=Land $2=City $3=ISP_name
-
-get_info_isdn_backend : fills the infos from the line of the tree returned into $isdn and $netc
-input :
- $isdn
- $netc
- $name : the line choosen in the tree of ISP : string : /^(.*)\|(.*)\|(.*)$/ with $1=Land $2=City $3=ISP_name
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-$isdn ouput
- $isdn->{user_name}, $isdn->{phone_out}, $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3},
-$netc output
- $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3}
-
-isdn_detect_backend : detects isdn pci card and fills the infos in $isdn : only detects one card
-input
- $isdn
-$isdn output:
- $isdn->{description} $isdn->{vendor} $isdn->{id} $isdn->{driver} $isdn->{card_type} $isdn->{type}
-
-isdn_get_list : return isdn cards descriptions list. This function is not use internally.
-output : descriptions : list of strings
-
-isdn_get_info : return isdn card infos. This function is not use internally.
-input : the description of the card (see isdn_get_list)
-output : a reference on the decription of the card. : ref on a hash(description,type,irq,mem,io,io0,io1card,)
-
-conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling setup_thiskind($in, 'net', !$::expert, 1) or setup_thiskind_backend before calling this function. Basically, you call this function in 2 times.
-input
- $prefix
- $netc
- $intf
- $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
- $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
- $ipadr : facultative, ip address of the interface : string
- $netadr : facultative, netaddress of the interface : string
-when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-$intf output: $device is the result of
- $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
- $intf->{$device}->{BOOTPROTO} : $type
- $intf->{$device}->{NETMASK} : '255.255.255.0'
- $intf->{$device}->{NETWORK} : $netadr
- $intf->{$device}->{ONBOOT} : "yes"
-$netc output:
- $netc->{nb_cards} : nb of ethernet cards
- $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-output:
- $all_cards : a list of a list ( (eth1, module1), ... , (ethn, modulen)). Pass the ethx as $interface in further call.
- $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-
-adsl_conf_backend : write adsl configuration
-input :
- $prefix
- $adsl
- $netc
- $adsl_type : type of cnx : string : "pptp" or "pppoe"
-$adsl input:
- $adsl->{login}, $adsl->{passwd}, $adsl->{atboot}
-$netc input:
- $netc->{NET_DEVICE}
- $netc->{dnsServer2}
- $netc->{dnsServer3}
- $netc->{DOMAINNAME2}
-$netc output:
- $netc->{NET_INTERFACE} is set to "ppp0"
-
-modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-input
- $modem
- $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-output:
- $modem->{device} : device where the modem were detected
-
-get_net_device : return the device choosen for the net cnx
-no input
-output : name of the internet device.
-
-read_net_conf : read the information stored in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
-input:
- $prefix
- $netcnx
- $netc
-
-set_net_conf : set the information from netcnx in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
- $prefix
- $netcnx
- $netc : useless! REMOVE ME
diff --git a/docs/mdk-vs-redhat b/docs/mdk-vs-redhat
deleted file mode 100644
index 4d0de8223..000000000
--- a/docs/mdk-vs-redhat
+++ /dev/null
@@ -1,43 +0,0 @@
-+ Open Development (at least DrakX)
-+ UDMA66 (HPT366)
-+ gamerz
-+ number of packages
-+ better packages(?)
-+ no automatic handling of ide burners
-+ urpmi/rpmdrake
-+ XFdrake
-+ no newbie install
-+ reiserfs
-+ fat resizing
-+ 3D handling (eg: Voodoo3)
-+ diskdrake (vs diskdruid)
-+ usb storage (?)
-+ KDE2
-+ faces in kdm/gdm
-+ menu
-+ alternatives
-+ /etc/emacs/site-start.d
-+ default config
-+ i18n (bootloader keyboard)
-
-+ More user-friendliness in general:
-	+ you can choose between multiple net devices when more than one are
-	detected
-	+ you are presented with the media descriptions (disks, cdrom's)
-	when you must choose between multiple media, and not only "sda",
-	"hdc", ..
-	+ when installing from a disk partition, you are presented with an
-	extract of the directory contents when you fail to give the
-	correct location, which is very helpful to correct the input
-	instead of simply rebooting to remember where on earth you
-	mirrored the distribution on your disks
-
-+ Automatic mode (Redhat's equivalent is called "kickstart") is not
-  performed according to a file on the floppy but from kernel parameters,
-  which have many pros, among them: (1) we don't need the vfat filesystem
-  for that purpose, and (2) with advanced bootloaders such as grub and
-  lilo you can edit parameters on the fly at boot time.
-
-- no LABEL= in fstab (for auto renumbering of devices)
-- kerberos
-- LDAP
diff --git a/docs/net_object_class.fig b/docs/net_object_class.fig
deleted file mode 100644
index 19f7f5318..000000000
--- a/docs/net_object_class.fig
+++ /dev/null
@@ -1,73 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4050 4162 675 338 4050 4162 4725 4500
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 5700 3112 675 338 5700 3112 6375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 7275 4087 675 338 7275 4087 7950 4425
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4800 1462 975 487 4800 1462 5775 1950
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 2700 3112 675 338 2700 3112 3375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4875 5887 975 487 4875 5887 5850 6375
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 9450 5062 675 338 9450 5062 10125 5400
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4654 4038 3900 3225 4654 4038 754 813
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4125 1875 3225 2850
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4575 1950 4200 3750
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5250 1950 5475 2775
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 3000 3450 3600 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5925 3450 6675 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 2700 3450 4050 5550
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4125 4500 4575 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5625 3450 5025 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5775 1575 9450 4725
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 7800 4275 9000 4800
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4800 1950 4800 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 9000 975 9450 4725
-2 2 0 1 0 7 50 0 -1 0.000 0 0 -1 0 0 5
-	 7500 75 10687 75 10687 975 7500 975 7500 75
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 7500 375 5400 1050
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5550 1800 7200 3675
-4 0 0 50 0 0 12 0.0000 4 135 885 4350 1500 Netconnect\001
-4 0 0 50 0 0 12 0.0000 4 135 435 2475 3150 ISDN\001
-4 0 0 50 0 0 12 0.0000 4 135 720 3675 4200 MODEM\001
-4 0 0 50 0 0 12 0.0000 4 135 960 6825 4125 ETHERNET\001
-4 0 0 50 0 0 12 0.0000 4 135 480 5400 3150 ADSL\001
-4 0 0 50 0 0 12 0.0000 4 135 420 4650 5925 Tools\001
-4 0 0 50 0 0 12 0.0000 4 135 660 9150 5100 Network\001
-4 0 0 50 0 0 12 0.0000 4 135 1305 8400 375 Rest of the world\001
-4 0 0 50 0 0 12 0.0000 4 180 2595 7725 600 (draknet, printerdrake, tinyfirewall\001
-4 0 0 50 0 0 12 0.0000 4 180 2310 7725 825 ftp, http, net_monitor, drakgw)\001
-4 0 0 50 0 0 12 0.0000 4 195 2760 3525 6825 Global variables $in, $prefix, $install\001
-4 0 0 50 0 0 12 0.0000 4 180 2340 3525 7050 shared with the module globals\001
diff --git a/docs/object_class.fig b/docs/object_class.fig
deleted file mode 100644
index 44fd3fe89..000000000
--- a/docs/object_class.fig
+++ /dev/null
@@ -1,32 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 1200 2625 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 1125 7575 1650
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 5025 2025 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 5025 2025 6075 4125
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 1200 4950 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 1125 4950 1725
-4 0 0 100 0 0 12 0.0000 4 180 1755 1800 1050 install_steps_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1440 6900 975 install_steps_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1140 2100 1950 interactive_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1275 6900 1950 interactive_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1875 4125 1950 install_steps_interactive\001
-4 0 0 100 0 0 12 0.0000 4 135 810 3975 3450 interactive\001
-4 0 0 100 0 0 12 0.0000 4 180 975 5625 4350 install_steps\001
diff --git a/docs/wizard.doc b/docs/wizard.doc
deleted file mode 100644
index 0bbf8d254..000000000
--- a/docs/wizard.doc
+++ /dev/null
@@ -1,31 +0,0 @@
-How to handle wizard?
-
-to switch in wizard mode:
-set $::isWizard to true;
-if $::Wizard_no_previous is set to true, the wizard won't display the previous button. Usefull for first step
-if $::Wizard_finished is set to true, the wizard will display Finish instead of Next. Usefull for last step
-
-how to code:
-Code as if there were no wizard.
-OK button is displayed as Next
-Cancel is displayed as Previous
-a additional button Cancel is added, xhich die with the exception 'wizard_cancelled'
-
-You have to handle the previous button. For example:
-
-step 1:
-ask_from list( blablablabl) or return;
-step2:
-ask_from list( blablablabl) or goto step1;
-step3:
-ask_from list( blablablabl) or goto step2;
-
-etc... You don't have to handle the wizard Cancel button as it send an exception.
-
-Understood? If yes, you'll see that there is a pb with ask_yesorno. In this case, yes+next returns true, no+next returns false, Cancel send the exception 'wizard_canceled' and previous send the exception 'wizard previous'. So you have to handle the previous button manually.
-
-plop.
-
-dam's, pour vous servir
-
-