diff options
| author | Francois Pons <fpons@mandriva.com> | 2001-11-30 13:02:26 +0000 |
|---|---|---|
| committer | Francois Pons <fpons@mandriva.com> | 2001-11-30 13:02:26 +0000 |
| commit | a35bd31a5f8d3014388f6fe5b3e586830ced9329 (patch) | |
| tree | 77d792e0c3224861a4f4ef524a42f9395cd53f8d /docs/spec-DrakX-8.0.html | |
| parent | 378aeccfd8c058e86198ced08564b3134b59cc25 (diff) | |
| download | drakx-backup-do-not-use-a35bd31a5f8d3014388f6fe5b3e586830ced9329.tar drakx-backup-do-not-use-a35bd31a5f8d3014388f6fe5b3e586830ced9329.tar.gz drakx-backup-do-not-use-a35bd31a5f8d3014388f6fe5b3e586830ced9329.tar.bz2 drakx-backup-do-not-use-a35bd31a5f8d3014388f6fe5b3e586830ced9329.tar.xz drakx-backup-do-not-use-a35bd31a5f8d3014388f6fe5b3e586830ced9329.zip | |
added spec (forgotten for quite a long)
Diffstat (limited to 'docs/spec-DrakX-8.0.html')
| -rw-r--r-- | docs/spec-DrakX-8.0.html | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/docs/spec-DrakX-8.0.html b/docs/spec-DrakX-8.0.html new file mode 100644 index 000000000..3fd545447 --- /dev/null +++ b/docs/spec-DrakX-8.0.html @@ -0,0 +1,405 @@ +<html><head><title>DrakX Specification for Linux-Mandrake 8.0</title></head> +<body bgcolor="#FFFFFF" link="#0066FF" vlink="#0066FF" alink="#FF0000"> +<table border="0" cellpadding="0" cellspacing="0" width="100%"> +<tr> +<td bgcolor="#99AAFF"><h2 align="left">DrakX Specification for Linux-Mandrake 8.0</h2></td></tr> +<tr><td valign="top"> +Current team of Install group is : +<p> +<table cellpadding="2" cellspacing="2" border="1" width="30%"> +<tbody> +<tr valign="Top"> +<td valign="Top">gc + +</td> +</tr> +<tr valign="Top"> +<td valign="Top">damien + +</td> +</tr> +<tr valign="Top"> +<td valign="Top">fpons + +</td> +</tr> +<tr valign="Top"> +<td valign="Top">pixel + +</td> +</tr> +</tbody> +</table> +<p> + +<pre> + + <b>Boot process (stage1)</b> + + Installation begin by booting from CD-ROM or Diskette. From CD-ROM all +installation method are available (CD, HD, NFS, FTP, HTTP) on options. From +Diskette according to image selected, only some related method (network or cdrom +or hd) are available and module managed due to size limitation to 1.44Mb. + Options are always available by pressing on F1. + + <b>DrakX process (stage2)</b> + + DrakX installation organized in steps (execution sequence described below). +Steps listed on left side and help available on bottom right side. most of the +screen is available for various dialog for interacting with the user. Steps +execution sequence is automated and described below. + +Mouse is probed and if none has been found or if the mouse has not moved, a +specific mouse configuration is displayed at the begining. + + +Before the graphical steps, there is a detection step. It detects various +hardware, including modems (from tty0 to tty7), mouse (serial, usb, ps/2) and +tablets. + + <b>Steps</b> + + <i>Choose Your language</i>: step always displayed. default choice is previous one or +<font color="#000080"><i>English</i></font>. After choosing a language, a license splash screen translated in the +chosen language is displayed with <font color="#000080"><i>Accept</i></font> and <font color="#000080"><i>Refuse</i></font> buttons. <font color="#000080"><i>Refuse</i></font> should +stop installation. <font color="#000080"><i>Accept</i></font> validate language choice which are propagated to all +DrakX visible widget. Advanced mode allow to select other language available to +be installed. Advanced mode allow to select language which will be installed on +system. + If step is redone, the license is no more displayed. + + <font color="#000080"><i>Select Install Class</i></font>: step always displayed. default choice is previous one +or <font color="#000080"><i>Recommended</i></font>. Only one other option available is <font color="#000080"><i>Customized</i></font>. Two buttons +available are <font color="#000080"><i>Install</i></font> or <font color="#000080"><i>Upgrade</i></font>. Available steps (left side) are changed +according to installation class selected, where the default is the one of +<font color="#000080"><i>Recommended</i></font> with <font color="#000080"><i>Install</i></font>. + + <font color="#000080"><i>Hard Drive Detection</i></font>: step always displayed. In recommended mode, +automatically done. In Customized mode, all modules that manage SCSI/IDE cards +are loaded automatically and a question asking for other module to load is +displayed. + If clicked later or if to the question to load other module the +answer is <font color="#000080"><i>Yes</i></font>, a list of module is displayed (or if the question to other +module to load is. When a module is chosen, two options are available +<font color="#000080"><i>Autoprobe</i></font> and <font color="#000080"><i>Specify options</i></font>. Autoprobe try to load the module without any +other user options (default module parameter). Specify options allow user to +give module parameters individually in a list for all known parameters. At this +point <font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> are available, Cancel should stop the module installation +and go to next step. If any error occurs during module installation, a question +asking to try with other parameter is displayed, the same module is still used. + + <font color="#000080"><i>Setup filesystems</i></font>: step always displayed. display a list of available choice +accoding to what has been probed. May contains <font color="#000080"><i>Use free space</i></font>, "Use existing +partition<font color="#000080"><i>, </i></font>Use the window partition for loopback<font color="#000080"><i>, </i></font>Use the free space on the +Windows partition<font color="#000080"><i>, </i></font>Remove Windows(TM)<font color="#000080"><i>|</i></font>Erase entire disk" (according to disk +configuration => only one big fat for the first case only), "Custom disk +partitioning". + If <font color="#000080"><i>Use free space</i></font> mode, auto allocation in available on available disk. + If <font color="#000080"><i>Use existing partition</i></font> mode, a list of partition named in Linux +scheme are displayed with their approximate size in Mb and propose mount point +to choose in list boxes for each partitions available on hard drive. + If <font color="#000080"><i>Use the window partition for loopback</i></font> mode, DrakX use available size +on the windows partition to create a root file and a swap file which will be +used in loopback, this means this is a lnx4win installation. + If <font color="#000080"><i>Use the free space on the Windows partition</i></font> mode, DrakX will resize +the windows partition and allocate true linux filesystem (at least / and swap). + If <font color="#000080"><i>Remove Windows(TM)</i></font>|<font color="#000080"><i>Erase entire disk</i></font> mode, DrakX clean the +partition table before auto allocating partition. + If <font color="#000080"><i>Custom disk partitioning</i></font> mode, diskdrake is launch. TO BE DEFINED to +change make diskdrake use only advanced mode. +Diskdrake show all partition of all non-removable disk graphically. All special +partition are hidden, only user accessible partition are visible: this remove +extended partition, whole disk partition on sparc platform. Clicking on a disk +notebook tab show all his partitions. Clicking on a partition show all actions +available for this partition (depend if customized or advanced mode) as well as +information on this partition (depend if customized or advanced mode). Most +diskdrake operation are done without writing on disk (exception are Resizing +partitions) and everything is written once on the disk when exiting diskdrake, +at any time if writing partition table is necessary, there are always a dialog +box asking the user to confirm the write. If no operation are modifying +partition table, no dialog is displayed on exit (for example if giving mount +point to partition). General action are available too: + <font color="#000080"><i>Clear All</i></font>: clear all partition of the given disk. + <font color="#000080"><i>Auto allocate</i></font>: try to allocate partition in available disk (not the +seen disk). + <font color="#000080"><i>Undo</i></font>: undo last operation. + <font color="#000080"><i>Done</i></font>: quit and save changes. +Other operations are available in advanced mode: + <font color="#000080"><i>Rescue partition table</i></font>: try to rescue a lost partition table, +absolutely no garantee to succeed and may destroy what could be saveable by +another tools. + <font color="#000080"><i>Reload</i></font>: reload partition table from disk, erasing all changes in +memory done by the user. + <font color="#000080"><i>Wizard</i></font>: go to partition wizard, that the partition filesystems default +behaviour on startup. + <font color="#000080"><i>Restore from floppy</i></font>: restore a partition table from previously saved +partition table from diskdrake. + <font color="#000080"><i>Save to floppy</i></font>: save partition table to floppy. + <font color="#000080"><i>Options</i></font>: global options available for filesystem configuration. This +include <font color="#000080"><i>Removable media automouting supermount</i></font> check box disabled by default. + Operation available on partition are: + <font color="#000080"><i>Mount point</i></font>: change or define mount point for partition, only +available for true filesystem partition. + <font color="#000080"><i>Resize</i></font>: resize partition, if a specific algorithm to keep data is +used no data may be lost, else all data are lost but nothing is written by +diskdrake on the partition data in this last case (this means data can be +restored by restoring original size and location). + <font color="#000080"><i>Delete</i></font>: delete partition, if the same partition is created (same type, +location, size) all data can be restored as diskdrake doesn't write on partition +data. + Operation available on partition table but in advanced mode are: + <font color="#000080"><i>Type</i></font>: change type of partition, all data will be lost but diskdrake as +above does not destroy them, and everyting can be restored. + <font color="#000080"><i>Format</i></font>: format partition, at this point, all data ARE LOST. + <font color="#000080"><i>Mount</i></font>: mount partition now, usefull for swap to increase memory +capacity for machine low on resource that are not available to complete setup +filesystem step correctly (problably if a resize partition is used on FAT fs). +allow Mounting swap on customized mode too. + A legend for partition type colors is available +(Ext2,ReiserFS,Swap,FAT,Other,Empty). It has additionnal features to create a +partition or change its type (only available in advanced mode). + + <font color="#000080"><i>Format partitions</i></font>: step always displayed. display list of partition to +format with click boxes. Some are defined according to type of partitions and if +the partition has been created or taken back. +If a partition has already been formated, it is not proposed, or if it should +not be proposed (alrady existing partition like /mnt/windows). +On Advanced tag, an additional dialog is displayed to select partition to format +(all available partition listed) and to format them with bad block checking. + + <font color="#000080"><i>Choose packages</i></font>: step always displayed. default selection done to be +<font color="#000080"><i>correct</i></font> according to size available, Install or Upgrade, Hardware available. +This selection is done according to <font color="#000080"><i>Mandrake first choice</i></font> of packages. +On all mode, display groups and main desktop used (KDE or Gnome), an +individual package selection check box is available to allow selecting package +individually. In this case, a dialog displaying a tree with groups, (Mandrake +first choice/alternatives) and packages is shown on the left part, a description +window for each packages is shown on the right part. + + <font color="#000080"><i>Install system</i></font>: step always displayed. no interactive and display +installation progression. include if available and on a CD basis a spash screen +of advertising and other (pub!). + + <font color="#000080"><i>Hardware panel</i></font>: step always displayed. show current configuration for +Mouse, Keyboard, TimeZone, Graphic/TV Card, Monitor. +At each values chosen (list boxes displayed a +synthesis description) the current dialog is removed from screen and specific +configuration panels are displayed (like currently for mouse, keyboard ...). +And end of these specific configuration panels, this one is remapped on screen +to be accepted in general. + + <b>Sub steps of Hardware panel:</b> + + <font color="#000080"><i>Configure mouse</i></font>: displayed on request or if the mouse has not been +moved (so unsafe detection), but have to be displayed earlier. A mouse tree +selection for type is displayed with default case as what is probed or +<font color="#000080"><i>serial/Generic 2 button Mouse</i></font> if none has been probed. <font color="#000080"><i>Cancel</i></font> disable mouse +modification and <font color="#000080"><i>Ok</i></font> allow next mouse configuration dialog. Then comes a serial +port dialog for serial mice (default mouse connected to COM1 if nothing found). +Then a mouse screen control is chown (according to mouse capacity: 3 buttons +with or without mouse, need 7 buttons checking ?). Here <font color="#000080"><i>Ok</i></font> validate to go to +next step and <font color="#000080"><i>Cancel</i></font> to first mouse dialog displayed (mouse tree selection for +type). + + <font color="#000080"><i>Configure keyboard</i></font>: displayed on request. default is set according to +TimeZone definition (itself defaulting to language selection at the beginning). +A list of keyboard is shown to the user and <font color="#000080"><i>Ok</i></font> validates change and return to +<font color="#000080"><i>Hardware panel</i></font> dialog with enabled change. <font color="#000080"><i>Cancel</i></font> abort any modification and +return to the same <font color="#000080"><i>Hardware panel</i></font> dialog. + + <font color="#000080"><i>Configure timezone</i></font>: displayed on request. default is set according to +language selection. A timezone tree selection is shown with only the subtree +corresponding to the current selection expanded (as other tree dialog). <font color="#000080"><i>Ok</i></font> +validates change and return to <font color="#000080"><i>Hardware panel</i></font> dialog whereas <font color="#000080"><i>Cancel</i></font> avoid +the change before returning to the same main dialog. + + <font color="#000080"><i>Graphic Card</i></font>: display graphic card probed. No change available. + + <font color="#000080"><i>TV Card</i></font>: display TV/Tuner card probed. No change available. + + <font color="#000080"><i>Monitor</i></font>: need execution of ddcxinfos at this point. Only Size, Max +resolution and depth displayed. No change available. + + + Miscellaneous step have been removed and dispatched to other steps. "Use +hard drive optimisation<font color="#000080"><i> and </i></font>Enable num lock at startup<font color="#000080"><i> are removed. </i></font>Choose +security level<font color="#000080"><i> is moved to security step. </i></font>Precise RAM size if needed" and +<font color="#000080"><i>Clean /tmp at each boot</i></font> are moved to bootloader step. +<font color="#000080"><i>Removable media automouting</i></font> is moved to diskdrake options. + + <font color="#000080"><i>Security</i></font>: step displayed only in customized mode. TO BE DEFINED. should +display at least securty level to choose. level are <font color="#000080"><i>Low</i></font>, <font color="#000080"><i>Medium</i></font>, <font color="#000080"><i>High</i></font> and +for advanced there are <font color="#000080"><i>Welcome To Crackers</i></font>, <font color="#000080"><i>Poor</i></font>, <font color="#000080"><i>Paranoid</i></font> too. + + <font color="#000080"><i>Configure networking</i></font>: step always displayed. dialog always displayed in +both <font color="#000080"><i>Recommended</i></font> and <font color="#000080"><i>Customized</i></font> mode. A list of network configuration +entries are shown with the following: + <font color="#000080"><i>Configure a normal modem connection</i></font> + <font color="#000080"><i>Configure an ISDN connection</i></font> + "Configure a DSL (or ADSL) connection + <font color="#000080"><i>Configure a cable connection</i></font> + <font color="#000080"><i>Configure local network</i></font>|<font color="#000080"><i>Reconfigure local network</i></font> + <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> + <font color="#000080"><i>Done</i></font> + By cliking on a specific item, another dialog is displayed to configure +some specific part of the network. + <font color="#000080"><i>Configure a normal modem connection</i></font>: display a question to probe for a +modem if not already detected, then if none are found or probe has been refused +a list of possible serial device are listed (in the form ttySx / COM(x+1) with +the current mouse device removed if it is serial). After that a dialog including +all parameters than can be used is shown. This includes <font color="#000080"><i>Connection Name</i></font>, +<font color="#000080"><i>Phone number</i></font>, <font color="#000080"><i>Login ID</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Authentication</i></font>, <font color="#000080"><i>Domain name</i></font>, <font color="#000080"><i>DNS 1</i></font> +and <font color="#000080"><i>DNS 2</i></font>. Authentication is a combo of <font color="#000080"><i>PAP</i></font>, <font color="#000080"><i>Termina-Based</i></font> and +<font color="#000080"><i>Script-Based</i></font> (It seems necessary to get CHAP back on this one, no way of +testing TO BE DEFINED). If no DNS are given, the connection is configured to try +using provider DNS. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> button are available. + <font color="#000080"><i>Configure an ISDN connection</i></font>: +Try to detect some PCI card. If not detected, asks if it's a ISA/pcmcia or PCI +card, and gives the list of the cards. Information are then asked: +<font color="#000080"><i>Card IRQ</i></font> only if ISA/pcmcia +<font color="#000080"><i>Card mem (DMA)</i></font> only if ISA/pcmcia +<font color="#000080"><i>Card IO</i></font> only if ISA/pcmcia +<font color="#000080"><i>Card IO_0</i></font> only if ISA/pcmcia with io0 +<font color="#000080"><i>Card IO_1</i></font> only if ISA/pcmcia with io1 +<font color="#000080"><i>Your personal phone number</i></font> phone +<font color="#000080"><i>Provider name (ex provider.net)</i></font> +<font color="#000080"><i>Provider phone number</i></font> +<font color="#000080"><i>Provider dns 1</i></font> +<font color="#000080"><i>Provider dns 2</i></font> +<font color="#000080"><i>Dialing mode</i></font> auto or manual +<font color="#000080"><i>Account Login (user name)</i></font> +<font color="#000080"><i>Account Password</i></font> hided +<font color="#000080"><i>Confirm Password</i></font> again + <font color="#000080"><i>Configure a DLS (or ADSL) connection</i></font>: +The user chooses between pptp, pppoe and dhcp. If dhcp, redirection to LAN. +If there is more than one ethernet card, The user must choose the card to use +(displayed with the module). After that, some informations are asked: +<font color="#000080"><i>Provider name (ex provider.net)</i></font> +<font color="#000080"><i>Provider dns 1</i></font> +<font color="#000080"><i>Provider dns 2</i></font> +<font color="#000080"><i>Account Login (user name)</i></font> +<font color="#000080"><i>Account Password</i></font> hided +<font color="#000080"><i>Confirm Password</i></font> again + <font color="#000080"><i>Configure a cable connection</i></font>: redirection to LAN + <font color="#000080"><i>Configure local network</i></font>: display what has been probed with a question +about using another module and <font color="#000080"><i>Yes</i></font>, <font color="#000080"><i>No</i></font> and <font color="#000080"><i>See hardware info</i></font> buttons. +<font color="#000080"><i>No</i></font> is the default. If <font color="#000080"><i>Yes</i></font> is clicked a list of modules is displayed with +<font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> buttons available. <font color="#000080"><i>Cancel</i></font> should go back to previous +question. If <font color="#000080"><i>See hardware info</i></font> is clicked a list of probed hardware is +displayed. If <font color="#000080"><i>Yes</i></font> is clicked, for each ethernet interface, a dialog asking for +IP address, Netmask and Automatic IP check box (DHCP/BOOTP) is displayed. Then +if DHCP has been chosen, only a dialog asking for Host name and another for HTTP +proxy and FTP proxy if any. If DHCP has not been chosen, an IP address has to be +defined and a dialog including <font color="#000080"><i>Host name</i></font>, <font color="#000080"><i>DNS server</i></font>, <font color="#000080"><i>Gateway</i></font> and "Gateway +device" is displayed. Then the same HTTP proxy and FTP proxy dialog as above. As +network configuration may to have been reworked a bit it has TO BE DEFINED if +this is kept like that or not. + <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> is just a way to toggle +networking on or off, may be to be accessible only for advanced mode. + <font color="#000080"><i>Quit</i></font> exit the network step. + +<b>NETWORK ADVANCED DOCUMENTATION:</b> +Here is a list of entry points available in post install without using the ugly +install graphic toolkit: + +<a href=<font color="#000080"><i>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</i></font>>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</a> + + <font color="#000080"><i>Configure Printer</i></font>: step always displayed. In recommended mode, only +activated if a local printer is detected, else no printer are configured by +default. In customized mode or if the step has been clicked a list of printer +already configured is displayed and the possibility to add or exit the +configuration. It allow configuration of printers for both LPR and CUPS +individually (available by advanced mode when adding a printer). Printer +protocol managed are local/usb/samba/ncp/lpd for LPR and +local/usb/serial/samba/lpd/cups_network for CUPS. + + <font color="#000080"><i>Set root password</i></font>: step always displayed for Install only. In +recommended mode display only a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry +to select the root password. In advanced mode, a Use NIS (yellow pages) check +boxes and Use MD5 check box are available. <font color="#000080"><i>Ok</i></font> validate root password and "No +password<font color="#000080"><i> avoid setting a password. </i></font>No password<font color="#000080"><i> is only available in </i></font>Low" +security level or less. The length of the minimal password depend upon security level. + +In corporate firewall : + <font color="#000080"><i>Set admin password</i></font>: step always displayed for Install only. It only + displays a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry +to select the admin password. +The length of the minimal password depend upon security level. (double of the + security level) + + <font color="#000080"><i>Add a user</i></font>: step always displayed for Install Only. In recommend mode +display <font color="#000080"><i>Real name</i></font>, <font color="#000080"><i>User name</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font> and icon +choices as graphical. For customized mode a shell combo is available to choose a +specific shell for the user depending on the package installed. The real name is +the user friendly name of the user whereas user name is its login id name. The +box display user that have already been added below the title. <font color="#000080"><i>Accept user</i></font> +button allow the creation of the user and <font color="#000080"><i>Done</i></font> finish this step. High or +higher security level implies the creation of at least one user. Password length +are subject to same restriction according to security level. In advanced mode, +allow to choose the user in auto login mode. + + <font color="#000080"><i>Create a boot disk</i></font>: step always displayed. In recommended mode this +step is automatically done by doing nothing. If clicked or customized mode, the +user is prompted to allow building a boot disk (default is yes). In advanced +mode allow selection of floppy drive. + + <font color="#000080"><i>Install boot loader</i></font>: step always displayed. In recommended mode this +step is automatically done. In customized mode, a combo <font color="#000080"><i>Boot device</i></font> list the +various boot device that can be used where the bootloader can be installed. The +boot device can the Linux description of the whole disk available (ex: /dev/hda) +or partition available in these disk or floppy drives. Other platform +specificity are not listed here. + LBA check box is displayed in advanced mode (enabled by default) to +allow using LBA addressing if available (PC with LILO). bootloader combo to +select a given bootloader to use, available choice are <font color="#000080"><i>Grub</i></font>, "LILO with text +menu<font color="#000080"><i>, </i></font>LILO with graphical menu<font color="#000080"><i>. default chosen is </i></font>LILO +with graphical menu<font color="#000080"><i>. </i></font>Delay before booting default image" entry +field is available with default value current setting (upgrade) or 5 else. +<font color="#000080"><i>Precise RAM size if needed (found xx MB)</i></font> entry is displayed too, +<font color="#000080"><i>clean /tmp</i></font> check box is disabled by default too. +Boot in graphical mode (init 5) is available here in advanced mode too +(previously in X configuration). <font color="#000080"><i>Video mode</i></font> combo, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font>, +<font color="#000080"><i>Restrict command line options</i></font> check box is displayed. +Video mode combo list text mode and video mode used for frame buffer, video mode +used for frame buffer are available only if the install managed to boot with +frame buffer activated. Password are restricted according to security level as +other password. Password are mandatory according to security level TO BE DEFINED. + + <font color="#000080"><i>Configure X</i></font>: step always displayed. By default on recommended mode, +everything is done automatically if possible up to test of graphic card, and if +the user accept the settings no more question are asked to him. In customized +mode a dialog is displayed to choose resolution, color depth and which version +of XFree (with 3D optionally) is available for the current card where only a +short description is displayed. <font color="#000080"><i>Ok</i></font> button allow to jump to test phase (for the +first time only) if available. <font color="#000080"><i>Cancel</i></font> return to main XFree configuration +window allowing to change Monitor, Graphic card, Server options or Resolution +with X version to choose. <font color="#000080"><i>Show all</i></font> extend resolution list to more resolutions +according to card (with onboard memory) only and no more monitor capabilities. + The main dialog is a list of command to change some X configuration aspect +according to advanced mode or not : + <font color="#000080"><i>Change Monitor</i></font>: display a tree selection of monitors where default one +is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. + <font color="#000080"><i>Change Graphic card</i></font>: display a tree selection of graphic card where +default one is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. If <font color="#000080"><i>Unlisted</i></font> +is chosen, then a tree of server/driver is displayed containing available server +for XF3 or driver for XF4. <font color="#000080"><i>Cancel</i></font> return to main window and <font color="#000080"><i>Ok</i></font> validates +change. + <font color="#000080"><i>Change Server options</i></font>: available only in advanced mode. display list +of check boxes options for server currently used. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> available. + <font color="#000080"><i>Change Resolution</i></font>: change resolution and depth including with X server +version chosen (relative to Xdrakres too). + <font color="#000080"><i>Show Information</i></font>: display an information dialog showing current +configuration internals of X. + <font color="#000080"><i>Test again</i></font>: restart test with current configuration of X. + <font color="#000080"><i>Quit</i></font>: exit X configuration main window. Other question about autologin +and window manager to use are asked on Add user step. + + <font color="#000080"><i>Exit install</i></font>: step displayed only in customized mode but always +executed. Only a text is displayed with a <font color="#000080"><i>Ok</i></font> button. If clicked and some step +have not been executed/completed correctly, a question dialog ask the user if he +really want to quit now, default answer is <font color="#000080"><i>No</i></font>. Advanced switch let user access +to do the previously <font color="#000080"><i>Auto install floppy</i></font> step in DrakX < 8.0. This is just a +question asking the user to generate an auto install floppy automatically. +</pre> +</body> +</html> |