summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPascal Rigaux <pixel@mandriva.com>2000-03-25 21:49:26 +0000
committerPascal Rigaux <pixel@mandriva.com>2000-03-25 21:49:26 +0000
commit18fb55671bbe54db5316e309b88fbbe9b9cf2a95 (patch)
treecae392d06d5a0985c642ee45484caef11ac86bd3
parent0f3c576319ecf8ee27b7adfbf805ca1f93fd8fca (diff)
downloaddrakx-backup-do-not-use-18fb55671bbe54db5316e309b88fbbe9b9cf2a95.tar
drakx-backup-do-not-use-18fb55671bbe54db5316e309b88fbbe9b9cf2a95.tar.gz
drakx-backup-do-not-use-18fb55671bbe54db5316e309b88fbbe9b9cf2a95.tar.bz2
drakx-backup-do-not-use-18fb55671bbe54db5316e309b88fbbe9b9cf2a95.tar.xz
drakx-backup-do-not-use-18fb55671bbe54db5316e309b88fbbe9b9cf2a95.zip
no_comment
-rw-r--r--docs/TODO118
-rw-r--r--perl-install/ChangeLog32
-rw-r--r--perl-install/Xconfig.pm2
-rw-r--r--perl-install/Xconfigurator.pm133
-rw-r--r--perl-install/Xconfigurator_consts.pm201
-rw-r--r--perl-install/detect_devices.pm1
-rw-r--r--perl-install/fs.pm4
-rw-r--r--perl-install/fsedit.pm1
-rw-r--r--perl-install/install2.pm2
-rw-r--r--perl-install/install_any.pm14
-rw-r--r--perl-install/install_steps.pm31
-rw-r--r--perl-install/install_steps_interactive.pm52
-rw-r--r--perl-install/modules.pm2
-rw-r--r--perl-install/partition_table.pm5
-rw-r--r--perl-install/pkgs.pm2
-rw-r--r--perl-install/share/list1
16 files changed, 312 insertions, 289 deletions
diff --git a/docs/TODO b/docs/TODO
index c42c2c65a..91a65a2a0 100644
--- a/docs/TODO
+++ b/docs/TODO
@@ -10,14 +10,10 @@ warning on diskdrake startup, made them as warning ?).
-to test--------------------------------------------------------------------------------
tree for choosing monitors (buggy?)
-configure services at install
-
what happens if a module fails to insmod (scsi step), in beginner/normal/expert
fstab must be sorted (/usr/local after /usr)
-diskdrake should warn if nb_ide_parts > 63, nb_scsi_parts > 15
-
RAID upgrades
add choice clean /tmp or not in expert
@@ -30,55 +26,35 @@ bug if ide-scsi, no more hdX, but scd0 (aka sr0)
check on update for conf.modules and modules.conf !
-features-------------------------------------------------------------------------------
-let diskdrake have dos/win partition automatically set up with mount point,
-this will help loopback too.
-
handle NT (add entry for it in lilo, put it in fstab)
-(7.1) rewrite crypto stuff
-
(NEED 7.1) auto-install for corporate, very important (need consolidation).
(7.1 or later) clean SCSI CDROM autoboot.
+stage1 & cdrom: add ability in expert to choose the scsi cdrom drive to use
+
(7.1) sparc ehancement, avoid V7+ machine target (div and mul not in v7 standard)
-(7.1) improve printerdrake to at least have the same functionalities as printtool.
+(7.1)syslinux in graphical mode to be improved for heavily bogus BIOSes.
+(7.1)individual package selection: double click is tiring...
(7.1)better help for partitioning in newbie
-
(7.1 or later?)help in some configuration files.
+(7.1) rewrite crypto stuff
+crypto: add a cancel & progress bar while downloading
+error handling (like reading hdlist)
(7.1)progression bar on crypto.
-(?)firewall configuration (instant firewalling?)
-
-(7.1)syslinux in graphical mode to be improved for heavily bogus BIOSes.
-
(7.1)install in 800x600
- need handling of both 640x480 (mostly for VGA16) and 800x600
-(7.1, other persons)rescue:
-- small modification for stage1 to get the rescue stage2
-- create a stage2 with many tools (fdisk, bash...)
-the rescue could be on another cd (if multi-cd)
-! care must be taken about modules (if ide is in module...)
-
(7.1)Improved network configuration (PPP and/or Ethernet)
PPPoE install and configuration (SuSE includes it, DHCP-like)
-(7.1?)loopback partitions (even root one)
-
(7.1)standalone applications for configuration (netdrake, timetool, authentificationconf, soundcard)
-(7.1)feature missing: cancel installation
-crypto: add a cancel & progress bar while downloading
-error handling (like reading hdlist)
-
-(7.1)Generally improved package selection /ergonmic issue.
-Tree -> CTree, ``all'' branch with all packages
-show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install)
-
-(7.1?)grub, chos, gag
+(7.1) improve printerdrake to at least have the same functionalities as printtool.
(?)enable the testing of the mouse type (under X) (wheel)
possibility to specify the mouse
@@ -90,40 +66,31 @@ possibility to specify the mouse
(7.1 or later)widget for displaying fdisk (dindinx)
(see above)add fdisk using the zvt widget (taken in gnome-libs)
-(done,pix,7.1)manage a lot of language (ergonomic issue as it already exists)
-
-(done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ...
-
-(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
-
-(done,pix,7.1)partitioning, keyboard shortcut.
-
-(done,fpons,7.1)index/compress hdlist? (for multi-cd)
-! for multi-cd live is mandatory, small transaction are mandatory too.
+(7.1, other persons)rescue:
+- small modification for stage1 to get the rescue stage2
+- create a stage2 with many tools (fdisk, bash...)
+the rescue could be on another cd (if multi-cd)
+! care must be taken about modules (if ide is in module...)
----
(?) paride in stage1
+stage1 & network: add ability to choose the network interface to use
(?) msec custom
-stage1 & network: add ability to choose the network interface to use
-stage1 & cdrom: add ability in expert to choose the scsi cdrom drive to use
+(?)firewall configuration (instant firewalling?)
ability to add nfs/weird_fs entries in fstab
-(obsolete) pb with dependencies ``missing'': icewm do not require XFree86 and so you can have icewm but no X server
-
-auto ppp-configure with free provider
-
-easy fixes-----------------------------------------------------------------------------
-in ok_cancel, focus has 3 states, should be 2 (ask dindinx)
-
rpmdrake proposition for cdrom labels
use option nocheck to mount for upgrades
-fixes needing thinking-----------------------------------------------------------------
+bug: changing mem= in miscellaneous doesn't modify lilo conf if you backtrack
+
ask_many_from_list can't keyboard scroll
with /usr, /usr/local and /usr/local/e mount points i get an error at step mounting local filesystems
@@ -155,8 +122,6 @@ the XFdrake test does not handle the fontset
> again.
> ask_from_list cancel at /usr/lib/libDrakX/my_gtk.pm line 504.
-bug in ext2resizing (no sparse superbloc, don't finish properly)
-
diskdrake: take from parted mklabel, hide(?)
bug in kde desktop if keeps home but not an upgrade
@@ -182,6 +147,7 @@ bug keyboard focus: after switch in console at Xconfig step
adduserdrake to remove/update users
(???)free provider auto configuration facility (to be discussed).
+auto ppp-configure with free provider
(?)on laptop, configure the MMU to use swap not very often
@@ -191,12 +157,6 @@ adduserdrake to remove/update users
better wacom support
-(obsolete) bug in diskdrake: can in strange cases create a primary partition at sector #0
-
-(done,pix(partly, protection against bugging))bug in diskdrake:
-in expert: blank, create hda5 at beginning, create hda6 at the end, create hda7
-in the middle, remove the first one. Result hda5 at the end and bug.
-
(fpons)bug: CANON BJC 4X00 do not work with current rhs-printfilters
(work with magicfilters (debian))
(should be handled by ghostscript BJC600's driver)
@@ -209,8 +169,6 @@ X configuration and bootloader in kickstart
XFdrake chooseResolutions with ask_from_list do not permit ``Show all''
-(obsolete) have a better time estimation of the remaining time in install packages
-
(?) options in mkfs, progress bar when formatting
(?) when some error occurs, partition must be unset isFormatted
@@ -247,6 +205,9 @@ hibernation on laptop -> clock not restored
-(?)---------------------------------------------------------------------------------
+(?) lilo-0.22-19mdk is buggy with boot=/dev/hde & root=/dev/sda13, it needs
+disk=/dev/hde bios=0x80 & disk=/dev/sda bios=0x81
+
(?)using setxkb, enable the testing of the keyboard
(?)XFdrake does not handle fbdev
@@ -496,3 +457,40 @@ eg: SIS6326 needs "no_bitblt" "no_bltimage" and 24bpp instead of 32bpp
(done,pix) Xconfiguration: if "can't open fixed font", relaunch xfs.
+(obsolete) pb with dependencies ``missing'': icewm do not require XFree86 and so you can have icewm but no X server
+
+(obsolete) bug in ext2resizing (no sparse superbloc, don't finish properly)
+
+(done,pix,7.1)manage a lot of language (ergonomic issue as it already exists)
+
+(done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ...
+
+(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
+
+(done,pix,7.1)partitioning, keyboard shortcut.
+
+(done,fpons,7.1)index/compress hdlist? (for multi-cd)
+! for multi-cd live is mandatory, small transaction are mandatory too.
+
+(done,pix,7.1?)loopback partitions (even root one)
+
+(done,pix)in ok_cancel, focus has 3 states, should be 2 (ask dindinx)
+
+(done,pix,7.1)Generally improved package selection /ergonmic issue.
+Tree -> CTree, ``all'' branch with all packages
+show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install)
+
+(done,pix)let diskdrake have dos/win partition automatically set up with mount point,
+this will help loopback too.
+
+(done,pix,7.1)grub
+
+(done,pix,7.1)feature missing: cancel installation
+
+(obsolete) bug in diskdrake: can in strange cases create a primary partition at sector #0
+
+(done,pix(partly, protection against bugging))bug in diskdrake:
+in expert: blank, create hda5 at beginning, create hda6 at the end, create hda7
+in the middle, remove the first one. Result hda5 at the end and bug.
+
+(obsolete) have a better time estimation of the remaining time in install packages
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
index b9b7c0cad..0a3ed269b 100644
--- a/perl-install/ChangeLog
+++ b/perl-install/ChangeLog
@@ -1,3 +1,35 @@
+2000-03-25 Pixel <pixel@mandrakesoft.com>
+
+ * lilo.pm: updated to the new format of entries. It was an hash.
+ Now the key is field kernel_or_dev, and entries is an array.
+
+ (get): added, it returns the entry using a kernel
+ (needed because entries is no more a hash)
+
+ * install_steps_interactive.pm (setupLILO): adapted to the new format
+
+ * Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling
+
+ * fsedit.pm (suggest_part): if suggested part contains a field
+ "hd", ensure the partition is created on this hard drive
+
+ * install2.pm (main): before leaving installation, remove
+ /var/lib/urpmi if urpmi not installed
+
+ * diskdrake.pm (Resize): ext2resize to size $part->{size} instead
+ of $size
+
+2000-03-24 Pixel <pixel@mandrakesoft.com>
+
+ * detect_devices.pm (hasHPT): added. Now nice handling of hpt366
+ (ultra66) without rebooting and making special floppy :)
+
+ * lilo.pm (install_grub): much better grub configuration (better
+ than lilo's :pp)
+
+ * install_steps.pm (setupBootloaderBefore): remove entry floppy
+ for security > 3
+
2000-03-23 Pixel <pixel@mandrakesoft.com>
* install_steps_gtk.pm (selectMouse): added, takes care of telling
diff --git a/perl-install/Xconfig.pm b/perl-install/Xconfig.pm
index 8e31ed4af..a65bdb29c 100644
--- a/perl-install/Xconfig.pm
+++ b/perl-install/Xconfig.pm
@@ -44,7 +44,6 @@ sub getinfoFromXF86Config {
open F, "$prefix/etc/X11/XF86Config" or return {};
foreach (<F>) {
if (/^Section "Keyboard"/ .. /^EndSection/) {
- $o->{keyboard}{altmeta} ||= ($1 eq "ModeShift" ? 1 : 0) if /^\s*RightAlt\s+"(.*?)"/;
$o->{keyboard}{xkb_keymap} ||= $1 if /^\s*XkbLayout\s+"(.*?)"/;
} elsif (/^Section "Pointer"/ .. /^EndSection/) {
$o->{mouse}{XMOUSETYPE} ||= $1 if /^\s*Protocol\s+"(.*?)"/;
@@ -60,6 +59,7 @@ sub getinfoFromXF86Config {
$c{flags}{needVideoRam} ||= 1 if /^\s*VideoRam\s+/;
$c{vendor} ||= $1 if /^\s*VendorName\s+"(.*?)"/;
$c{board} ||= $1 if /^\s*BoardName\s+"(.*?)"/;
+ $c{driver} ||= $1 if /^\s*Driver\s+"(.*?)"/;
$c{options}{$1} ||= 1 if /^\s*Option\s+"(.*?)"/;
$c{options}{$1} ||= 0 if /^\s*#\s*Option\s+"(.*?)"/;
diff --git a/perl-install/Xconfigurator.pm b/perl-install/Xconfigurator.pm
index 956f8695a..f71a08454 100644
--- a/perl-install/Xconfigurator.pm
+++ b/perl-install/Xconfigurator.pm
@@ -2,7 +2,7 @@ package Xconfigurator;
use diagnostics;
use strict;
-use vars qw($in $install $isLaptop $resolution_wanted @window_managers @depths @monitorSize2resolution @hsyncranges %min_hsync4wres @vsyncranges %depths @resolutions %serversdriver @svgaservers @accelservers @allbutfbservers @allservers %vgamodes %videomemory @ramdac_name @ramdac_id @clockchip_name @clockchip_id %keymap_translate %standard_monitors $intro_text $finalcomment_text $s3_comment $cirrus_comment $probeonlywarning_text $monitorintro_text $hsyncintro_text $vsyncintro_text $XF86firstchunk_text $keyboardsection_start $keyboardsection_part2 $keyboardsection_part3 $keyboardsection_end $pointersection_text1 $pointersection_text2 $monitorsection_text1 $monitorsection_text2 $monitorsection_text3 $monitorsection_text4 $modelines_text_Trident_TG_96xx $modelines_text $devicesection_text $screensection_text1 %lines @options %xkb_options $default_monitor);
+use vars qw($in $install $isLaptop $resolution_wanted @window_managers @depths @monitorSize2resolution @hsyncranges %min_hsync4wres @vsyncranges %depths @resolutions %serversdriver @svgaservers @accelservers @allbutfbservers @allservers %vgamodes %videomemory @ramdac_name @ramdac_id @clockchip_name @clockchip_id %keymap_translate %standard_monitors $s3_comment $cirrus_comment $XF86firstchunk_text $keyboardsection_start $keyboardsection_start_v4 $keyboardsection_part2 $keyboardsection_part3 $keyboardsection_part3_v4 $keyboardsection_end $pointersection_text $pointersection_text_v4 $monitorsection_text1 $monitorsection_text2 $monitorsection_text3 $monitorsection_text4 $modelines_text_Trident_TG_96xx $modelines_text $devicesection_text $devicesection_text_v4 $screensection_text1 %lines @options %xkb_options $default_monitor $layoutsection_v4);
use pci_probing::main;
use common qw(:common :file :functional :system);
@@ -55,6 +55,7 @@ sub readCardsDB {
$card->{flags}{needVideoRam} = 1 if member($val, qw(mgag10 mgag200 RIVA128));
},
SERVER => sub { $card->{server} = $val; },
+ DRIVER => sub { $card->{driver} = $val; },
RAMDAC => sub { $card->{ramdac} = $val; },
DACSPEED => sub { $card->{dacspeed} = $val; },
CLOCKCHIP => sub { $card->{clockchip} = $val; $card->{flags}{noclockprobe} = 1; },
@@ -623,43 +624,58 @@ sub write_XF86Config {
my ($o, $file) = @_;
my $O;
- local *F;
- open F, ">$file" or die "can't write XF86Config in $file: $!";
+ local (*F, *G);
+ open F, ">$file" or die "can't write XF86Config in $file: $!";
+ open G, ">$file-4" or die "can't write XF86Config in $file-4: $!";
print F $XF86firstchunk_text;
+ print G $XF86firstchunk_text;
#- Write keyboard section.
$O = $o->{keyboard};
print F $keyboardsection_start;
-
- print F " RightAlt ", ($O->{altmeta} ? "ModeShift" : "Meta"), "\n";
- print F $keyboardsection_part2;
- print F " XkbDisable\n" unless $O->{xkb_keymap};
+ print G $keyboardsection_start_v4;
+ print F qq( XkbDisable\n) unless $O->{xkb_keymap};
+ print G qq( Option "XkbDisable"\n) unless $O->{xkb_keymap};
print F $keyboardsection_part3;
+ print G $keyboardsection_part3_v4;
print F qq( XkbLayout "$O->{xkb_keymap}"\n);
+ print G qq( Option "XkbLayout" "$O->{xkb_keymap}"\n);
print F join '', map { " $_\n" } @{$xkb_options{$O->{xkb_keymap}} || []};
+ print G join '', map { /(\S+)(.*)/; qq( Option "$1" $2\n) } @{$xkb_options{$O->{xkb_keymap}} || []};
print F $keyboardsection_end;
+ print G $keyboardsection_end;
#- Write pointer section.
$O = $o->{mouse};
- print F $pointersection_text1;
+ print F $pointersection_text;
+ print G $pointersection_text_v4;
print F qq( Protocol "$O->{XMOUSETYPE}"\n);
+ print G qq( Option "Protocol" "$O->{XMOUSETYPE}"\n);
print F qq( Device "/dev/$O->{device}"\n);
+ print G qq( Option "Device" "/dev/$O->{device}"\n);
#- this will enable the "wheel" or "knob" functionality if the mouse supports it
print F " ZAxisMapping 4 5\n" if
member($O->{XMOUSETYPE}, qw(IntelliMouse IMPS/2 ThinkingMousePS/2 NetScrollPS/2 NetMousePS/2 MouseManPlusPS/2));
- print F $pointersection_text2;
print F "#" unless $O->{XEMU3};
- print F " Emulate3Buttons\n";
+ print G "#" unless $O->{XEMU3};
+ print F qq( Emulate3Buttons\n);
+ print G qq( Option "Emulate3Buttons"\n);
print F "#" unless $O->{XEMU3};
- print F " Emulate3Timeout 50\n\n";
+ print G "#" unless $O->{XEMU3};
+ print F qq( Emulate3Timeout 50\n\n);
+ print G qq( Option "Emulate3Timeout" "50"\n\n);
print F "# ChordMiddle is an option for some 3-button Logitech mice\n\n";
+ print G "# ChordMiddle is an option for some 3-button Logitech mice\n\n";
print F "#" unless $O->{chordmiddle};
- print F " ChordMiddle\n\n";
+ print G "#" unless $O->{chordmiddle};
+ print F qq( ChordMiddle\n\n);
+ print G qq( Option "ChordMiddle"\n\n);
print F " ClearDTR\n" if $O->{cleardtrrts};
print F " ClearRTS\n\n" if $O->{cleardtrrts};
print F "EndSection\n\n\n";
+ print G "EndSection\n\n\n";
print F qq(
Section "Module"
@@ -686,71 +702,100 @@ EndSection
#- Write monitor section.
$O = $o->{monitor};
print F $monitorsection_text1;
+ print G $monitorsection_text1;
print F qq( Identifier "$O->{type}"\n);
+ print G qq( Identifier "$O->{type}"\n);
print F qq( VendorName "$O->{vendor}"\n);
- print F qq( ModelName "$O->{model}"\n);
- print F "\n";
+ print G qq( VendorName "$O->{vendor}"\n);
+ print F qq( ModelName "$O->{model}"\n\n);
+ print G qq( ModelName "$O->{model}"\n\n);
print F $monitorsection_text2;
- print F qq( HorizSync $O->{hsyncrange}\n);
- print F "\n";
+ print G $monitorsection_text2;
+ print F qq( HorizSync $O->{hsyncrange}\n\n);
+ print G qq( HorizSync $O->{hsyncrange}\n\n);
print F $monitorsection_text3;
- print F qq( VertRefresh $O->{vsyncrange}\n);
- print F "\n";
+ print G $monitorsection_text3;
+ print F qq( VertRefresh $O->{vsyncrange}\n\n);
+ print G qq( VertRefresh $O->{vsyncrange}\n\n);
print F $monitorsection_text4;
print F ($O->{modelines} || '') . ($o->{card}{type} eq "TG 96" ? $modelines_text_Trident_TG_96xx : $modelines_text);
print F "\nEndSection\n\n\n";
+ print G "\nEndSection\n\n\n";
#- Write Device section.
$O = $o->{card};
print F $devicesection_text;
+ print G $devicesection_text_v4;
print F qq(Section "Device"\n);
+ print G qq(Section "Device"\n);
print F qq( Identifier "$O->{type}"\n);
+ print G qq( Identifier "$O->{type}"\n);
print F qq( VendorName "$O->{vendor}"\n);
+ print G qq( VendorName "$O->{vendor}"\n);
print F qq( BoardName "$O->{board}"\n);
+ print G qq( BoardName "$O->{board}"\n);
+
+ print G qq( Driver "$O->{driver}"\n);
print F "#" if $O->{memory} && !$O->{flags}{needVideoRam};
+ print G "#" if $O->{memory} && !$O->{flags}{needVideoRam};
print F " VideoRam $O->{memory}\n" if $O->{memory};
+ print G " VideoRam $O->{memory}\n" if $O->{memory};
print F map { " $_\n" } @{$O->{lines} || []};
+ print G map { " $_\n" } @{$O->{lines} || []};
print F qq( Ramdac "$O->{ramdac}"\n) if $O->{ramdac};
+ print G qq( Ramdac "$O->{ramdac}"\n) if $O->{ramdac};
print F qq( Dacspeed "$O->{dacspeed}"\n) if $O->{dacspeed};
+ print G qq( Dacspeed "$O->{dacspeed}"\n) if $O->{dacspeed};
if ($O->{clockchip}) {
print F qq( Clockchip "$O->{clockchip}"\n);
+ print G qq( Clockchip "$O->{clockchip}"\n);
} else {
print F " # Clock lines\n";
+ print G " # Clock lines\n";
print F " Clocks $_\n" foreach (@{$O->{clocklines}});
+ print G " Clocks $_\n" foreach (@{$O->{clocklines}});
}
print F "\n";
+ print G "\n";
print F map { (!$O->{options}{$_} && '#') . qq( Option "$_"\n) } keys %{$O->{options} || {}};
+ print G map { (!$O->{options}{$_} && '#') . qq( Option "$_"\n) } keys %{$O->{options} || {}};
print F "EndSection\n\n\n";
+ print G "EndSection\n\n\n";
#- Write Screen sections.
- print F $screensection_text1;
+ print F $screensection_text1, "\n";
+ print G $screensection_text1, "\n";
+
+ my $subscreen = sub {
+ my ($f, $server, $defdepth, $depths) = @_;
+ print $f " DefaultColorDepth $defdepth\n" if $defdepth;
+
+ foreach (ikeys(%$depths)) {
+ my $m = $server ne "fbdev" ? join(" ", map { qq("$_->[0]x$_->[1]") } @{$depths->{$_}}) : qq("default");
+ print $f qq( Subsection "Display"\n);
+ print $f qq( Depth $_\n) if $_;
+ print $f qq( Modes $m\n);
+ print $f qq( ViewPort 0 0\n);
+ print $f qq( EndSubsection\n);
+ }
+ print $f "EndSection\n";
+ };
my $screen = sub {
my ($server, $defdepth, $device, $depths) = @_;
print F qq(
-
Section "Screen"
Driver "$server"
Device "$device"
Monitor "$o->{monitor}{type}"
);
- print F " DefaultColorDepth $defdepth\n" if $defdepth;
-
- foreach (ikeys(%$depths)) {
- my $m = $server ne "fbdev" ? join(" ", map { qq("$_->[0]x$_->[1]") } @{$depths->{$_}}) : qq("default");
- print F qq( Subsection "Display"\n);
- print F qq( Depth $_\n) if $_;
- print F qq( Modes $m\n);
- print F qq( ViewPort 0 0\n);
- print F qq( EndSubsection\n);
- }
- print F "EndSection\n";
- }; #-"
+ $subscreen->(*F, $server, $defdepth, $depths);
+ };
#- SVGA screen section.
print F qq(
@@ -774,19 +819,30 @@ Section "Screen"
&$screen("accel", $O->{default_depth}, $O->{type}, $O->{depth});
&$screen("fbdev", $O->{default_depth}, $O->{type}, $O->{depth});
+
+
+ print G qq(
+Section "Screen"
+ Identifier "screen1"
+ Device "$O->{type}"
+ Monitor "$o->{monitor}{type}"
+);
+ $subscreen->(*G, "svga", $O->{default_depth}, $O->{depth});
+
+ print G $layoutsection_v4;
}
sub XF86check_link {
- my ($void) = @_;
+ my ($ext) = @_;
- my $f = "$prefix/etc/X11/XF86Config";
+ my $f = "$prefix/etc/X11/XF86Config$ext";
touch($f);
- my $l = "$prefix/usr/X11R6/lib/X11/XF86Config";
+ my $l = "$prefix/usr/X11R6/lib/X11/XF86Config$ext";
if (-e $l && (stat($f))[1] != (stat($l))[1]) { #- compare the inode, must be the sames
-e $l and unlink($l) || die "can't remove bad $l";
- symlinkf "../../../../etc/X11/XF86Config", $l;
+ symlinkf "../../../../etc/X11/XF86Config$ext", $l;
}
}
@@ -813,7 +869,8 @@ sub main {
($prefix, $o, $in, $allowFB, $isLaptop, $install) = @_;
$o ||= {};
- XF86check_link();
+ XF86check_link('');
+ XF86check_link('-4');
{
my $w = $in->wait_message('', _("Preparing X-Window configuration"), 1);
@@ -858,7 +915,9 @@ sub main {
my $f = "$prefix/etc/X11/XF86Config";
if (-e "$f.test") {
rename $f, "$f.old" or die "unable to make a backup of XF86Config";
+ rename "$f-4", "$f-4.old";
rename "$f.test", $f;
+ rename "$f.test-4", "$f-4";
symlinkf "../..$o->{card}{prog}", "$prefix/etc/X11/X";
}
}
diff --git a/perl-install/Xconfigurator_consts.pm b/perl-install/Xconfigurator_consts.pm
index 2ddd2fb9a..fab7106f1 100644
--- a/perl-install/Xconfigurator_consts.pm
+++ b/perl-install/Xconfigurator_consts.pm
@@ -326,73 +326,6 @@ $default_monitor = "High Frequency SVGA, 1024x768 at 70 Hz";
'ru' => [ 'XkbVariant "winkeys"', 'XkbOptions "grp:caps_toggle"' ],
);
-#-#- * Screen/video card configuration.
-#-%ramdacs = (
-#- __("No RAMDAC Setting (recommended)") => '',
-#- __("AT&T 20C490 (S3 and AGX servers, ARK driver)"), => 'att20c490',
-#- __("AT&T 20C498/21C498/22C498 (S3, autodetected)"), => 'att20c498',
-#- __("AT&T 20C409/20C499 (S3, autodetected)"), => 'att20c409',
-#- __("AT&T 20C505 (S3)"), => 'att20c505',
-#- __("BrookTree BT481 (AGX)"), => 'bt481',
-#- __("BrookTree BT482 (AGX)"), => 'bt482',
-#- __("BrookTree BT485/9485 (S3)"), => 'bt485',
-#- __("Sierra SC15025 (S3, AGX)"), => 'sc15025',
-#- __("S3 GenDAC (86C708) (autodetected)"), => 's3gendac',
-#- __("S3 SDAC (86C716) (autodetected)"), => 's3_sdac',
-#- __("STG-1700 (S3, autodetected)"), => 'stg1700',
-#- __("STG-1703 (S3, autodetected)"), => 'stg1703',
-#- __("TI 3020 (S3)"), => 'ti3020',
-#- __("TI 3025 (S3, autodetected)"), => 'ti3025',
-#- __("TI 3026 (S3, autodetected)"), => 'ti3026',
-#- __("IBM RGB 514 (S3, autodetected)"), => 'ibm_rgb514',
-#- __("IBM RGB 524 (S3, autodetected)"), => 'ibm_rgb524',
-#- __("IBM RGB 525 (S3, autodetected)"), => 'ibm_rgb525',
-#- __("IBM RGB 526 (S3)"), => 'ibm_rgb526',
-#- __("IBM RGB 528 (S3, autodetected)"), => 'ibm_rgb528',
-#- __("ICS5342 (S3, ARK)"), => 'ics5342',
-#- __("ICS5341 (W32)"), => 'ics5341',
-#- __("IC Works w30C516 ZoomDac (ARK)"), => 'zoomdac',
-#- __("Normal DAC"), => 'normal',
-#-);
-#-
-#-@clockchip_name = (
-#- __("No Clockchip Setting (recommended)") => '',
-#- __("Chrontel 8391") => 'ch8391',
-#- __("ICD2061A and compatibles (ICS9161A => DCS2824)") => 'icd2061a',
-#- __("ICS2595") => 'ics2595',
-#- __("ICS5342 (similar to SDAC, but not completely compatible)") => 'ics5342',
-#- __("ICS5341") => 'ics5341',
-#- __("S3 GenDAC (86C708) and ICS5300 (autodetected)") => 's3gendac',
-#- __("S3 SDAC (86C716)") => 's3_sdac',
-#- __("STG 1703 (autodetected)") => 'stg1703',
-#- __("Sierra SC11412") => 'sc11412',
-#- __("TI 3025 (autodetected)") => 'ti3025',
-#- __("TI 3026 (autodetected)") => 'ti3026',
-#- __("IBM RGB 51x/52x (autodetected)") => 'ibm_rgb5xx',
-#-);
-#-
-
-$intro_text = "
-This program will create a basic XF86Config file, based on menu selections you make.
-
-The XF86Config file usually resides in /usr/X11R6/lib/X11 or /etc/X11. A
-sample XF86Config file is supplied with XFree86; it is configured for a
-standard VGA card and monitor with 640x480 resolution.
-
-You can either take the sample XF86Config as a base and edit it for your
-configuration, or let this program produce a base XF86Config file for your
-configuration and fine-tune it. Refer to /usr/X11R6/lib/X11/doc/README.Config
-for a detailed overview of the configuration process.
-
-For accelerated servers (including accelerated drivers in the SVGA server),
-there are many chipset and card-specific options and settings. This program
-does not know about these. On some configurations some of these settings must
-be specified. Refer to the server man pages and chipset-specific READMEs.
-
-Before continuing with this program, make sure you know the chipset and
-amount of video memory on your video card. SuperProbe can help with this.
-It is also helpful if you know what server you want to run.";
-
$s3_comment = '
# Use Option "nolinear" if the server doesn\'t start up correctly
# (this avoids the linear framebuffer probe). If that fails try
@@ -409,64 +342,21 @@ $cirrus_comment = '
# address that the card maps the framebuffer to.
';
-$probeonlywarning_text = '
-It is possible that the hardware detection routines in the server some how
-cause the system to crash and the screen to remain blank. If this is the
-case, skip this step the next time. The server may need a
-Ramdac, ClockChip or special option (e.g. "nolinear" for S3) to probe
-and start-up correctly.
-';
-
-$monitorintro_text = __('
-Now we want to set the specifications of the monitor. The two critical
-parameters are the vertical refresh rate, which is the rate at which the
-the whole screen is refreshed, and most importantly the horizontal sync rate,
-which is the rate at which scanlines are displayed.
-
-The valid range for horizontal sync and vertical sync should be documented
-in the manual of your monitor. If in doubt, check the monitor database
-/usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there.
-');
-
-$hsyncintro_text = __('
-You must indicate the horizontal sync range of your monitor. You can either
-select one of the predefined ranges below that correspond to industry-
-standard monitor types, or give a specific range.
-
-It is VERY IMPORTANT that you do not specify a monitor type with a horizontal
-sync range that is beyond the capabilities of your monitor. If in doubt,
-choose a conservative setting.
-');
-
-$vsyncintro_text = __('
-You must indicate the vertical sync range of your monitor. You can either
-select one of the predefined ranges below that correspond to industry-
-standard monitor types, or give a specific range. For interlaced modes,
-the number that counts is the high one (e.g. 87 Hz rather than 43 Hz).
-');
$XF86firstchunk_text = '
-# File generated by XConfigurator.
+# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
-# **********************************************************************
-# Files section. This allows default font and rgb paths to be set
-# **********************************************************************
-
Section "Files"
-# The location of the RGB database. Note, this is the name of the
-# file minus the extension (like ".txt" or ".db"). There is normally
-# no need to change the default.
-
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
-# By default, Red Hat 6.0 and later now use a font server independent of
+# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
@@ -516,30 +406,40 @@ Section "Keyboard"
# following line
#Protocol "Xqueue"
- AutoRepeat 0 0
+ AutoRepeat 250 30
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
- #Xleds 1 2 3
+ #Xleds "1 2 3"
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
-';
-
-$keyboardsection_part2 = '
- ScrollLock Compose
- RightCtl Control
+ RightAlt Meta
+ ScrollLock Compose
+ RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
';
+$keyboardsection_start_v4 = '
+# **********************************************************************
+# Keyboard section
+# **********************************************************************
+
+Section "InputDevice"
+
+ Identifier "Keyboard1"
+ Driver "Keyboard"
+ Option "AutoRepeat" "250 30"
+';
+
if (arch() =~ /^sparc/) {
$keyboardsection_part3 = '
# To customise the XKB settings to suit your keyboard, modify the
@@ -578,6 +478,16 @@ if (arch() =~ /^sparc/) {
XkbGeometry "sun(type5)"
XkbSymbols "sun/us(sun5)"
';
+$keyboardsection_part3_v4 = '
+ Option "XkbRules" "sun"
+ Option "XkbModel" "sun"
+ Option "XkbLayout" "us"
+ Option "XkbCompat" "compat/complete"
+ Option "XkbTypes" "types/complete"
+ Option "XkbKeycodes" "sun(type5)"
+ Option "XkbGeometry" "sun(type5)"
+ Option "XkbSymbols" "sun/us(sun5)"
+';
} else {
$keyboardsection_part3 = '
# To customise the XKB settings to suit your keyboard, modify the
@@ -613,13 +523,18 @@ $keyboardsection_part3 = '
XkbRules "xfree86"
XkbModel "pc105"
';
+
+$keyboardsection_part3_v4 = '
+ Option "XkbRules" "xfree86"
+ Option "XkbModel" "pc105"
+';
}
$keyboardsection_end = '
EndSection
';
-$pointersection_text1 = '
+$pointersection_text = '
# **********************************************************************
# Pointer section
# **********************************************************************
@@ -627,20 +542,15 @@ $pointersection_text1 = '
Section "Pointer"
';
-$pointersection_text2 = '
-
-# When using XQUEUE, comment out the above two lines, and uncomment
-# the following line.
-
-# Protocol "Xqueue"
-
-# Baudrate and SampleRate are only for some Logitech mice
+$pointersection_text_v4 = '
+# **********************************************************************
+# Pointer section
+# **********************************************************************
-# BaudRate 9600
-# SampleRate 150
+Section "InputDevice"
-# Emulate3Buttons is an option for 2-button Microsoft mice
-# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
+ Identifier "Mouse1"
+ Driver "mouse"
';
$monitorsection_text1 = '
@@ -838,21 +748,23 @@ $devicesection_text = '
# Graphics device section
# **********************************************************************
-# Any number of graphics device sections may be present
-
Section "Device"
- Identifier "Generic VGA"
- VendorName "Unknown"
- BoardName "Unknown"
+ Identifier "Generic VGA"
Chipset "generic"
+EndSection
-# VideoRam 256
+';
-# Clocks 25.2 28.3
+$devicesection_text_v4 = '
+# **********************************************************************
+# Graphics device section
+# **********************************************************************
+Section "Device"
+ Identifier "Generic VGA"
+ Driver "vga"
EndSection
-# Device auto configured:
';
$screensection_text1 = '
@@ -861,3 +773,12 @@ $screensection_text1 = '
# **********************************************************************
';
+$layoutsection_v4 = '
+
+Section "ServerLayout"
+ Identifier "layout1"
+ Screen "screen1"
+ InputDevice "Mouse1" "CorePointer"
+ InputDevice "Keyboard1" "CoreKeyboard"
+EndSection
+';
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
index e5ca00ea5..f5e2efa89 100644
--- a/perl-install/detect_devices.pm
+++ b/perl-install/detect_devices.pm
@@ -197,6 +197,7 @@ sub syslog {
sub hasSMP { c::detectSMP() }
+#- warning: hasHPT does a pci probe
sub hasHPT {
cat_("/proc/cmdline") =~ /(ide2=(\S+)(\s+ide3=(\S+))?)/ and return $1;
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
index 7ab038273..c1352146f 100644
--- a/perl-install/fs.pm
+++ b/perl-install/fs.pm
@@ -341,9 +341,9 @@ sub write_fstab($;$$) {
isExt2($_) and ($freq, $passno) = (1, ($_->{mntpoint} eq '/') ? 1 : 2);
isNfs($_) and $dir = '', $options = $_->{options} || 'ro,nosuid,rsize=8192,wsize=8192';
- isFat($_) and $options = $_->{options} || "user,exec";
+ isFat($_) and $options = $_->{options} || "user,exec,umask=0";
- my $dev = isLoopback($_) ?
+ my $dev = isLoopback($_) ?
($_->{mntpoint} eq '/' ? "/initrd/loopfs$_->{loopback_file}" : loopback::file($_)) :
($_->{device} =~ /^\// ? $_->{device} : "$dir$_->{device}");
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
index e45883fd9..b89ffe25c 100644
--- a/perl-install/fsedit.pm
+++ b/perl-install/fsedit.pm
@@ -177,6 +177,7 @@ sub suggest_part($$$;$) {
grep { !$_->{maxsize} || $part->{size} <= $_->{maxsize} }
grep { $_->{size} <= ($part->{maxsize} || $part->{size}) }
grep { !has_mntpoint($_->{mntpoint}, $hds) || isSwap($_) && !$has_swap }
+ grep { !$_->{hd} || $_->{hd} eq $hd->{device} }
grep { !$part->{type} || $part->{type} == $_->{type} }
@$suggestions or return;
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index 8fa163367..3130eff8c 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -671,6 +671,8 @@ sub main {
#- make sure failed upgrade will not hurt too much.
install_steps::cleanIfFailedUpgrade($o);
+ -e "$o->{prefix}/usr/bin/urpmi" or eval { commands::rm("-rf", "$o->{prefix}/var/lib/urpmi") };
+
#- have the really bleeding edge ddebug.log for this f*cking msec :-/
eval { commands::cp('-f', "/tmp/ddebug.log", "$o->{prefix}/root") };
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index 08db3ef9a..f268fb81d 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -258,6 +258,13 @@ I'll try to go on blanking bad partitions"), $err]) unless $o->{partitioning}{re
_("DiskDrake failed to read correctly the partition table.
Continue at your own risk!")) if !$ok2 && $ok && !$o->{partitioning}{readonly};
+ my @win = grep { isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) }) } @{$o->{fstab}};
+ my @nt = grep { isNT($_) && isNT( { type => fsedit::typeOfPart($_->{device}) }) } @{$o->{fstab}};
+ log::l("win parts: ", join ",", map { $_->{device} } @win) if @win;
+ log::l("nt parts: ", join ",", map { $_->{device} } @nt) if @nt;
+ $_->{mntpoint} = @win == 1 ? "/mnt/windows" : "/mnt/win_$_->{device_windobe}" foreach @win;
+ $_->{mntpoint} = @nt == 1 ? "/mnt/nt" : "/mnt/nt_$_->{device_windobe}" foreach @nt;
+
$ok2;
}
@@ -440,22 +447,21 @@ sub setupFB {
#- a frame buffer kernel is used, in such case we use it instead
#- with the right mode, nothing more to do.
foreach (qw(secure smp)) {
- if ($o->{bootloader}{entries}{"/boot/vmlinuz-$_"}) {
+ if (my $e = lilo::get("/boot/vmlinuz-$_", $o->{bootloader})) {
if ($_ eq 'secure') {
log::l("warning: kernel-secure is not fb, using a kernel-fb instead");
#- nothing done, fall through linux-fb.
} else {
- $o->{bootloader}{entries}{"/boot/vmlinuz-$_"}{vga} = $vga;
+ $e->{vga} = $vga;
lilo::install($o->{prefix}, $o->{bootloader});
return 1;
}
}
}
- my $root = $o->{bootloader}{entries}{'/boot/vmlinuz'}{root};
if (lilo::add_kernel($o->{prefix}, $o->{bootloader}, kernelVersion(), 'fb',
{
label => 'linux-fb',
- root => $root,
+ root => lilo::get("/boot/vmlinuz", $o->{bootloader})->{root},
vga => $vga,
})) {
$o->{bootloader}{default} = 'linux-fb';
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index 6ba76b965..ab9c4ab24 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -262,6 +262,9 @@ Consoles 1,3,4,7 may also contain interesting information";
$o->pcmciaConfig();
+ #- for mandrake_firstime
+ output "$o->{prefix}/var/lock/TMP_1ST", "";
+
#- remove the nasty acon...
run_program::rooted($o->{prefix}, "chkconfig", "--del", "acon") unless $ENV{LANGUAGE} =~ /ar/;
@@ -612,15 +615,13 @@ sub readBootloaderConfigBeforeInstall {
#- change the /boot/vmlinuz or /boot/vmlinuz-smp entries to follow symlink.
foreach $image (keys %ofpkgs) {
- if ($o->{bootloader}{entries}{"/boot/$image"} && pkgs::packageFlagSelected($ofpkgs{$image})) {
- $v = readlink "$o->{prefix}/boot/$image";
- if ($v) {
- $v = "/boot/$v" if $v !~ m|^/|;
- if (-e "$o->{prefix}$v") {
- $o->{bootloader}{entries}{$v} = $o->{bootloader}{entries}{"/boot/$image"};
- delete $o->{bootloader}{entries}{"/boot/$image"};
- log::l("renaming /boot/$image entry by $v");
- }
+ pkgs::packageFlagSelected($ofpkgs{$image}) or next;
+ if (my $v = readlink "$o->{prefix}/boot/$image") {
+ $v = "/boot/$v" if $v !~ m|^/|;
+ if (-e "$o->{prefix}$v") {
+ my $e = lilo::get("/boot/$image", $o->{bootloader}) or next;
+ $e->{kernel} = $v;
+ log::l("renaming /boot/$image entry by $v");
}
}
}
@@ -640,6 +641,7 @@ sub setupBootloaderBefore {
} else {
require lilo;
lilo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion());
+ lilo::suggest_floppy($o->{bootloader}) if $o->{security} <= 3;
$o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
}
}
@@ -664,8 +666,8 @@ sub setupBootloader($) {
} else {
eval { lilo::install($o->{prefix}, $o->{bootloader}, $o->{fstab}) };
my $err = $@;
- eval { lilo::install_grub($o->{prefix}, $o->{bootloader}, $o->{fstab}) };
- die if $err;
+ eval { lilo::install_grub($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds}) };
+ die $err if $err;
}
}
@@ -745,11 +747,14 @@ sub miscellaneous {
if (my @l = detect_devices::getIDEBurners() and !/ide-scsi/) {
$_ .= " " . join(" ", map { "$_=ide-scsi" } @l);
}
- #- keep some given parameters
if (my $m = modules::get_options("ide-mod")) {
- /options="(.*)"/ and $_ .= " $1" if !/ide.=/;
+ $m =~ /options="(.*)"/ and $_ .= " $1" if !/ide.=/;
}
+ #- keep some given parameters
+ #-TODO
+
+ log::l("perImageAppend: $_");
$o->{bootloader}{perImageAppend} = $_;
}
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 2f8316b33..59aa06e70 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -749,14 +749,14 @@ _("Restrict command line options") => { val => \$b->{restricted}, type => "bool"
my $c = $o->ask_from_list_([''],
_("Here are the following entries in LILO.
You can add some more or change the existing ones."),
- [ (sort @{[map_each { "$::b->{label} ($::a)" . ($b->{default} eq $::b->{label} && " *") } %{$b->{entries}}]}), __("Add"), __("Done") ],
+ [ (sort @{[map { "$_->{label} ($_->{kernel_or_dev})" . ($b->{default} eq $_->{label} && " *") } @{$b->{entries}}]}), __("Add"), __("Done") ],
);
$c eq "Done" and last;
- my ($e, $name);
+ my ($e);
if ($c eq "Add") {
- my @labels = map { $_->{label} } values %{$b->{entries}};
+ my @labels = map { $_->{label} } @{$b->{entries}};
my $prefix;
if ($o->ask_from_list_('', _("Which type of entry do you want to add"), [ __("Linux"), __("Other OS (windows...)") ]) eq "Linux") {
$e = { type => 'image' };
@@ -768,17 +768,16 @@ You can add some more or change the existing ones."),
$e->{label} = $prefix;
for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
} else {
- ($name) = $c =~ /\((.*?)\)/;
- $e = $b->{entries}{$name};
+ $c =~ /(\S+)/;
+ ($e) = grep { $_->{label} eq $1 } @{$b->{entries}};
}
- my $old_name = $name;
my %old_e = %$e;
my $default = my $old_default = $e->{label} eq $b->{default};
my @l;
if ($e->{type} eq "image") {
@l = (
-_("Image") => { val => \$name, list => [ eval { glob_("/boot/vmlinuz*") } ] },
+_("Image") => { val => \$e->{kernel_or_dev}, list => [ eval { glob_("/boot/vmlinuz*") } ] },
_("Root") => { val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @{$o->{fstab}} ], not_edit => !$::expert },
_("Append") => \$e->{append},
_("Initrd") => { val => \$e->{initrd}, list => [ eval { glob_("/boot/initrd*") } ] },
@@ -787,7 +786,7 @@ _("Read-write") => { val => \$e->{'read-write'}, type => 'bool' }
@l = @l[0..5] unless $::expert;
} else {
@l = (
-_("Root") => { val => \$name, list => [ map { "/dev/$_->{device}" } @{$o->{fstab}} ], not_edit => !$::expert },
+_("Root") => { val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @{$o->{fstab}} ], not_edit => !$::expert },
_("Table") => { val => \$e->{table}, list => [ '', map { "/dev/$_->{device}" } @{$o->{hds}} ], not_edit => !$::expert },
_("Unsafe") => { val => \$e->{unsafe}, type => 'bool' }
);
@@ -803,16 +802,14 @@ _("Default") => { val => \$default, type => 'bool' },
'', \@l,
complete => sub {
$e->{label} or $o->ask_warn('', _("Empty label not allowed")), return 1;
- member($e->{label}, map { $_->{label} } grep { $_ != $e } values %{$b->{entries}}) and $o->ask_warn('', _("This label is already in use")), return 1;
- $name ne $old_name && $b->{entries}{$name} and $o->ask_warn('', _("A entry %s already exists", $name)), return 1;
- }
- )) {
+ member($e->{label}, map { $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $o->ask_warn('', _("This label is already in use")), return 1;
+ 0;
+ })) {
$b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
- delete $b->{entries}{$old_name};
- $b->{entries}{$name} = $e;
+ push @{$b->{entries}}, $e if $c eq "Add";
} else {
- delete $b->{entries}{$old_name};
+ @{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
}
}
eval { $o->SUPER::setupBootloader };
@@ -865,14 +862,14 @@ _("Restrict command line options") => { val => \$b->{restricted}, type => "bool"
my $c = $o->ask_from_list_([''],
_("Here are the following entries in SILO.
You can add some more or change the existing ones."),
- [ (sort @{[map_each { "$::b->{label} ($::a)" . ($b->{default} eq $::b->{label} && " *") } %{$b->{entries}}]}), __("Add"), __("Done") ],
+ [ (sort @{[map { "$_->{label} ($_->{kernel_or_dev})" . ($b->{default} eq $_->{label} && " *") } @{$b->{entries}}]}), __("Add"), __("Done") ],
);
$c eq "Done" and last;
- my ($e, $name);
+ my ($e);
if ($c eq "Add") {
- my @labels = map { $_->{label} } values %{$b->{entries}};
+ my @labels = map { $_->{label} } @{$b->{entries}};
my $prefix;
$e = { type => 'image' };
@@ -881,17 +878,16 @@ You can add some more or change the existing ones."),
$e->{label} = $prefix;
for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
} else {
- ($name) = $c =~ /\((.*?)\)/;
- $e = $b->{entries}{$name};
+ $c =~ /(\S+)/;
+ ($e) = grep { $_->{label} eq $1 } @{$b->{entries}};
}
- my $old_name = $name;
my %old_e = %$e;
my $default = my $old_default = $e->{label} eq $b->{default};
my @l;
if ($e->{type} eq "image") {
@l = (
-_("Image") => { val => \$name, list => [ eval { glob_("/boot/vmlinuz*") } ] },
+_("Image") => { val => \$e->{kernel_or_dev}, list => [ eval { glob_("/boot/vmlinuz*") } ] },
_("Partition") => { val => \$e->{partition}, list => [ map { ("/dev/$_->{device}" =~ /\D*(\d*)/)[0] || 1} @{$o->{fstab}} ], not_edit => !$::expert },
_("Root") => { val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @{$o->{fstab}} ], not_edit => !$::expert },
_("Append") => \$e->{append},
@@ -912,16 +908,14 @@ _("Default") => { val => \$default, type => 'bool' },
'', \@l,
complete => sub {
$e->{label} or $o->ask_warn('', _("Empty label not allowed")), return 1;
- member($e->{label}, map { $_->{label} } grep { $_ != $e } values %{$b->{entries}}) and $o->ask_warn('', _("This label is already in use")), return 1;
- $name ne $old_name && $b->{entries}{$name} and $o->ask_warn('', _("A entry %s already exists", $name)), return 1;
- }
- )) {
+ member($e->{label}, map { $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $o->ask_warn('', _("This label is already in use")), return 1;
+ 0;
+ })) {
$b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
- delete $b->{entries}{$old_name};
- $b->{entries}{$name} = $e;
+ push @{$b->{entries}}, $e if $c eq "Add";
} else {
- delete $b->{entries}{$old_name};
+ @{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
}
}
eval { $o->SUPER::setupBootloader };
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
index 38f9a6428..2e3729d59 100644
--- a/perl-install/modules.pm
+++ b/perl-install/modules.pm
@@ -517,6 +517,8 @@ sub load_thiskind($;&$) {
my @devs = (@pcidevs, @pcmciadevs);
+ load("sd_mod") if $type eq 'scsi' && @devs;
+
my %devs; foreach (@devs) {
my ($text, $mod) = @$_;
pci_probing::main::check($mod) or next;
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
index 660546339..5eaba831b 100644
--- a/perl-install/partition_table.pm
+++ b/perl-install/partition_table.pm
@@ -7,7 +7,7 @@ use Data::Dumper;
@ISA = qw(Exporter);
%EXPORT_TAGS = (
- types => [ qw(type2name type2fs name2type fs2type isExtended isExt2 isSwap isDos isWin isFat isPrimary isNfs isSupermount isRAID isHFS isMountableRW isApplePartMap isLoopback) ],
+ types => [ qw(type2name type2fs name2type fs2type isExtended isExt2 isSwap isDos isWin isFat isPrimary isNfs isSupermount isRAID isHFS isNT isMountableRW isApplePartMap isLoopback) ],
);
@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
@@ -48,7 +48,7 @@ arch() =~ /^sparc/ ? (
0x4 => 'DOS 16-bit FAT (up to 32M)',
0x5 => 'DOS 3.3+ Extended Partition',
0x6 => 'DOS FAT16',
- 0x7 => 'OS/2 IFS (e.g., HPFS) / Windows NT NTFS / Advanced Unix / QNX2.x pre-1988 (see below under IDs 4d-4f)',
+ 0x7 => 'NTFS (or HPFS)',
0x8 => 'OS/2 (v1.0-1.3 only) / AIX boot partition / SplitDrive / Commodore DOS / DELL partition spanning multiple drives / QNX 1.x and 2.x ("qny")',
),
0x9 => 'AIX data partition / Coherent filesystem / QNX 1.x and 2.x ("qnz")',
@@ -202,6 +202,7 @@ sub isDos($) { $ {{ 1=>1, 4=>1, 6=>1 }}{$_[0]{type}} }
sub isWin($) { $ {{ 0xb=>1, 0xc=>1, 0xe=>1, 0x1b=>1, 0x1c=>1, 0x1e=>1 }}{$_[0]{type}} }
sub isFat($) { isDos($_[0]) || isWin($_[0]) }
sub isNfs($) { $_[0]{type} eq 'nfs' } #- small hack
+sub isNT($) { $_[0]{type} == 0x7 }
sub isSupermount($) { $_[0]{type} eq 'supermount' }
sub isHFS($) { $type2fs{$_[0]{type}} eq 'hfs' }
sub isMountableRW { isExt2($_[0]) || isFat($_[0]) }
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
index 3be8ece68..409bca76c 100644
--- a/perl-install/pkgs.pm
+++ b/perl-install/pkgs.pm
@@ -65,7 +65,7 @@ autoirpm autoirpm-icons numlock
'zh_TW.Big5' => [ 'rxvt-CLE', 'fonts-ttf-big5' ],
);
-@preferred = qw(perl-GTK postfix ghostscript-X vim-minimal);
+@preferred = qw(perl-GTK postfix ghostscript-X vim-minimal kernel);
#- constant for small transaction.
$limitMinTrans = 8;
diff --git a/perl-install/share/list b/perl-install/share/list
index c1436489d..8db700e78 100644
--- a/perl-install/share/list
+++ b/perl-install/share/list
@@ -95,3 +95,4 @@
/usr/lib/perl5/site_perl/5.005/ARCH-linux/auto/Gtk/Gtk.bs
/usr/lib/perl5/site_perl/5.005/ARCH-linux/auto/Gtk/Gtk.so
/usr/lib/rpm/rpmrc
+/usr/sbin/ext2resize