summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPascal Rigaux <pixel@mandriva.com>2003-02-02 13:40:32 +0000
committerPascal Rigaux <pixel@mandriva.com>2003-02-02 13:40:32 +0000
commit101a5dfc666bd6df7943430470dc5130e906ff68 (patch)
tree0a7f1d0812923279a3088967892d7581f9e4a1c6
parent8a1887487fb4458c593a571578c244c4503d71ce (diff)
downloaddrakx-backup-do-not-use-101a5dfc666bd6df7943430470dc5130e906ff68.tar
drakx-backup-do-not-use-101a5dfc666bd6df7943430470dc5130e906ff68.tar.gz
drakx-backup-do-not-use-101a5dfc666bd6df7943430470dc5130e906ff68.tar.bz2
drakx-backup-do-not-use-101a5dfc666bd6df7943430470dc5130e906ff68.tar.xz
drakx-backup-do-not-use-101a5dfc666bd6df7943430470dc5130e906ff68.zip
move whatPrinter(), whatUsbport() and whatPrinterPort() out of detect_devices to printer::detect
(it cleans up detect_devices, and won't hurt eyes anymore :) this change, together with .perl_checker skipping printer::* marks the style disagreement between printer/* and the rest of install
-rw-r--r--perl-install/detect_devices.pm103
-rw-r--r--perl-install/printer/detect.pm107
-rw-r--r--perl-install/printer/printerdrake.pm3
3 files changed, 106 insertions, 107 deletions
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
index 4d861bfac..4d77e06ef 100644
--- a/perl-install/detect_devices.pm
+++ b/perl-install/detect_devices.pm
@@ -601,109 +601,6 @@ sub usbKeyboard2country_code {
unpack("C", $tmp);
}
-sub whatUsbport() {
- # The printer manufacturer and model names obtained with the usb_probe()
- # function were very messy, once there was a lot of noise around the
- # manufacturers name ("Inc.", "SA", "International", ...) and second,
- # all Epson inkjets answered with the name "Epson Stylus Color 760" which
- # lead many newbies to install their Epson Stylus Photo XXX as an Epson
- # Stylus Color 760 ...
- #
- # This routine based on an ioctl request gives very clean and correct
- # manufacturer and model names, so that they are easily matched to the
- # printer entries in the Foomatic database
- my @res;
- foreach my $i (0..15) {
- my $port = "/dev/usb/lp$i";
- my $realport = devices::make($port);
- next if !$realport;
- next if ! -r $realport;
- open(my $PORT, $realport) or next;
- my $idstr = "";
- # Calculation of IOCTL function 0x84005001 (to get device ID
- # string):
- # len = 1024
- # IOCNR_GET_DEVICE_ID = 1
- # LPIOC_GET_DEVICE_ID(len) =
- # _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
- # _IOC(), _IOC_READ as defined in /usr/include/asm/ioctl.h
- # Use "eval" so that program does not stop when IOCTL fails
- eval {
- my $output = "\0" x 1024;
- ioctl($PORT, 0x84005001, $output);
- $idstr = $output;
- } or do {
- close $PORT;
- next;
- };
- close $PORT;
- # Remove non-printable characters
- $idstr =~ tr/[\x00-\x1f]/\./;
- # Extract the printer data from the ID string
- my ($manufacturer, $model, $serialnumber, $description,
- $commandset, $sku) =
- ("", "", "", "", "");
- if ($idstr =~ /MFG:([^;]+);/ || $idstr =~ /MANUFACTURER:([^;]+);/) {
- $manufacturer = $1;
- $manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
- $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
- }
- # For HP's multi-function devices the real model name is in the "SKU"
- # field. So use this field with priority for $model when it exists.
- if ($idstr =~ /MDL:([^;]+);/ || $idstr =~ /MODEL:([^;]+);/) {
- $model ||= $1;
- }
- if ($idstr =~ /SKU:([^;]+);/) {
- $sku = $1;
- }
- if ($idstr =~ /DES:([^;]+);/ || $idstr =~ /DESCRIPTION:([^;]+);/) {
- $description = $1;
- $description =~ s/Hewlett[-\s_]Packard/HP/;
- $description =~ s/HEWLETT[-\s_]PACKARD/HP/;
- }
- if ($idstr =~ /SE*R*N:([^;]+);/) {
- $serialnumber = $1;
- }
- if ($idstr =~ /CMD:([^;]+);/ ||
- $idstr =~ /COMMAND\s*SET:([^;]+);/) {
- $commandset ||= $1;
- }
- # Was there a manufacturer and a model in the string?
- if ($manufacturer eq "" || $model eq "") {
- next;
- }
- # No description field? Make one out of manufacturer and model.
- if ($description eq "") {
- $description = "$manufacturer $model";
- }
- # Store this auto-detection result in the data structure
- push @res, { port => $port, val =>
- { CLASS => 'PRINTER',
- MODEL => $model,
- MANUFACTURER => $manufacturer,
- DESCRIPTION => $description,
- SERIALNUMBER => $serialnumber,
- 'COMMAND SET' => $commandset,
- SKU => $sku
- } };
- }
- @res;
-}
-
-#-CLASS:PRINTER;
-#-MODEL:HP LaserJet 1100;
-#-MANUFACTURER:Hewlett-Packard;
-#-DESCRIPTION:HP LaserJet 1100 Printer;
-#-COMMAND SET:MLC,PCL,PJL;
-sub whatPrinter {
- my @res = (whatParport(), whatUsbport());
- grep { $_->{val}{CLASS} eq "PRINTER" } @res;
-}
-
-sub whatPrinterPort() {
- grep { tryWrite($_) } qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9);
-}
-
sub probeSerialDevices {
foreach (0..3) {
#- make sure the device are created before probing,
diff --git a/perl-install/printer/detect.pm b/perl-install/printer/detect.pm
index 4645d94de..5c3a4fe1e 100644
--- a/perl-install/printer/detect.pm
+++ b/perl-install/printer/detect.pm
@@ -2,7 +2,6 @@ package printer::detect;
use strict;
use common;
-use detect_devices;
use modules;
sub local_detect {
@@ -10,7 +9,7 @@ sub local_detect {
eval { modules::unload(qw(lp parport_pc parport_probe parport)) }; #- on kernel 2.4 parport has to be unloaded to probe again
eval { modules::load(qw(parport_pc lp parport_probe)) }; #- take care as not available on 2.4 kernel (silent error).
my $_b = before_leaving { eval { modules::unload("parport_probe") } };
- detect_devices::whatPrinter();
+ whatPrinter();
}
sub net_detect { whatNetPrinter(1, 0) }
@@ -21,6 +20,110 @@ sub detect {
local_detect(), whatNetPrinter(1, 1);
}
+
+#-CLASS:PRINTER;
+#-MODEL:HP LaserJet 1100;
+#-MANUFACTURER:Hewlett-Packard;
+#-DESCRIPTION:HP LaserJet 1100 Printer;
+#-COMMAND SET:MLC,PCL,PJL;
+sub whatPrinter {
+ my @res = (whatParport(), whatUsbport());
+ grep { $_->{val}{CLASS} eq "PRINTER" } @res;
+}
+
+sub whatPrinterPort() {
+ grep { tryWrite($_) } qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9);
+}
+
+sub whatUsbport() {
+ # The printer manufacturer and model names obtained with the usb_probe()
+ # function were very messy, once there was a lot of noise around the
+ # manufacturers name ("Inc.", "SA", "International", ...) and second,
+ # all Epson inkjets answered with the name "Epson Stylus Color 760" which
+ # lead many newbies to install their Epson Stylus Photo XXX as an Epson
+ # Stylus Color 760 ...
+ #
+ # This routine based on an ioctl request gives very clean and correct
+ # manufacturer and model names, so that they are easily matched to the
+ # printer entries in the Foomatic database
+ my @res;
+ foreach my $i (0..15) {
+ my $port = "/dev/usb/lp$i";
+ my $realport = devices::make($port);
+ next if !$realport;
+ next if ! -r $realport;
+ open(my $PORT, $realport) or next;
+ my $idstr = "";
+ # Calculation of IOCTL function 0x84005001 (to get device ID
+ # string):
+ # len = 1024
+ # IOCNR_GET_DEVICE_ID = 1
+ # LPIOC_GET_DEVICE_ID(len) =
+ # _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
+ # _IOC(), _IOC_READ as defined in /usr/include/asm/ioctl.h
+ # Use "eval" so that program does not stop when IOCTL fails
+ eval {
+ my $output = "\0" x 1024;
+ ioctl($PORT, 0x84005001, $output);
+ $idstr = $output;
+ } or do {
+ close $PORT;
+ next;
+ };
+ close $PORT;
+ # Remove non-printable characters
+ $idstr =~ tr/[\x00-\x1f]/\./;
+ # Extract the printer data from the ID string
+ my ($manufacturer, $model, $serialnumber, $description,
+ $commandset, $sku) =
+ ("", "", "", "", "");
+ if ($idstr =~ /MFG:([^;]+);/ || $idstr =~ /MANUFACTURER:([^;]+);/) {
+ $manufacturer = $1;
+ $manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
+ $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
+ }
+ # For HP's multi-function devices the real model name is in the "SKU"
+ # field. So use this field with priority for $model when it exists.
+ if ($idstr =~ /MDL:([^;]+);/ || $idstr =~ /MODEL:([^;]+);/) {
+ $model ||= $1;
+ }
+ if ($idstr =~ /SKU:([^;]+);/) {
+ $sku = $1;
+ }
+ if ($idstr =~ /DES:([^;]+);/ || $idstr =~ /DESCRIPTION:([^;]+);/) {
+ $description = $1;
+ $description =~ s/Hewlett[-\s_]Packard/HP/;
+ $description =~ s/HEWLETT[-\s_]PACKARD/HP/;
+ }
+ if ($idstr =~ /SE*R*N:([^;]+);/) {
+ $serialnumber = $1;
+ }
+ if ($idstr =~ /CMD:([^;]+);/ ||
+ $idstr =~ /COMMAND\s*SET:([^;]+);/) {
+ $commandset ||= $1;
+ }
+ # Was there a manufacturer and a model in the string?
+ if ($manufacturer eq "" || $model eq "") {
+ next;
+ }
+ # No description field? Make one out of manufacturer and model.
+ if ($description eq "") {
+ $description = "$manufacturer $model";
+ }
+ # Store this auto-detection result in the data structure
+ push @res, { port => $port, val =>
+ { CLASS => 'PRINTER',
+ MODEL => $model,
+ MANUFACTURER => $manufacturer,
+ DESCRIPTION => $description,
+ SERIALNUMBER => $serialnumber,
+ 'COMMAND SET' => $commandset,
+ SKU => $sku
+ } };
+ }
+ @res;
+}
+
sub whatNetPrinter {
my ($network, $smb) = @_;
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 7f502dc1f..e5b028fd1 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -4,7 +4,6 @@ package printer::printerdrake;
use strict;
use common;
-use detect_devices;
use modules;
use network;
use log;
@@ -694,7 +693,7 @@ sub setup_local_autoscan {
}
my @port;
if ($::expert) {
- @port = detect_devices::whatPrinterPort();
+ @port = printer::detect::whatPrinterPort();
LOOP: foreach my $q (@port) {
if (@str) {
foreach my $p (@autodetected) {