no_comment

13 files changed, 92 insertions, 81 deletions

diff --git a/docs/TODO b/docs/TODO
index 4ba65c77e..2e7cd5ffc 100644
--- a/docs/TODO
+++ b/docs/TODO
@@ -1,3 +1,9 @@
+install apmd on laptops?? (maybe ask emcweb@btinernet.com (see alix))
+
+paride in stage1
+
+bug in XFdrake in install, cancel in choose Card do not close the window
+
 ask supermount or not, no supermount with kernel-secure
 
 (pix)add paride.o (and the others)
@@ -8,10 +14,6 @@ ask supermount or not, no supermount with kernel-secure
   (work with magicfilters (debian))
   (should be handled by ghostscript BJC600's driver)
 
-(fpons)bug: mouse freeze just before network configuration (mouse primax)
-
-(pix)urpmi: have the error log in stdout (like /mnt/nfs/... not available)
-
 (pix)see what can be done with nvram (50 bytes to save information)
 
 i18n
@@ -139,3 +141,8 @@ suggested partition tables must be better foreach installClass
 
 (done,fpons,pix) change the boot message of syslinux (have something different from RedHat)
 
+(done,pix) install_steps.pm: 569 (128M + 3)
+
+(done,pix) bug: mouse freeze just before network configuration (mouse primax)
+  (was kudzu)
+
diff --git a/perl-install/Makefile b/perl-install/Makefile
index ab5257684..96028e3af 100644
--- a/perl-install/Makefile
+++ b/perl-install/Makefile
@@ -33,7 +33,7 @@ tar-drakxtools: clean
 	$(MAKE) -C ../tools clean
 	cd .. ; rm -rf drakxtools ; cp -af perl-install drakxtools ; cp -af tools/ddcprobe tools/pnp_serial drakxtools	
 	cd ../drakxtools ; rm -rf install* ForMakefile.pm pkgs.pm ftp.pm t.pm standalone/CVS ; mv Makefile.drakxtools Makefile ; mv -f standalone/* .
-	cd .. ; tar cfy drakxtools.tar.bz2 --exclude CVS $(patsubst %,drakxtools/%,Makefile MonitorsDB Newt c ddcprobe pnp_serial po pci_probing resize_fat diskdrake diskdrake.rc XFdrake mousedrake lspcidrake printerdrake keyboarddrake *.pm)
+	cd .. ; tar cfy drakxtools.tar.bz2 --exclude CVS $(patsubst %,drakxtools/%,Makefile MonitorsDB Newt c ddcprobe pnp_serial po pci_probing resize_fat diskdrake diskdrake.rc XFdrake mousedrake lspcidrake printerdrake keyboarddrake netdrake *.pm)
 	cd .. ; rm -rf drakxtools
 
 $(DIRS):
diff --git a/perl-install/Makefile.drakxtools b/perl-install/Makefile.drakxtools
index 8fb4218b3..8bc1ab03c 100644
--- a/perl-install/Makefile.drakxtools
+++ b/perl-install/Makefile.drakxtools
@@ -16,7 +16,7 @@ $(DIRS):
 
 install:
 	install -d $(BINDEST) $(ETCDEST) $(SBINDEST) $(LIBDEST) $(X11DEST) $(DIRS:%=$(LIBDEST)/%)
-	install diskdrake XFdrake mousedrake lspcidrake printerdrake keyboarddrake $(SBINDEST)
+	install diskdrake XFdrake mousedrake lspcidrake printerdrake keyboarddrake netdrake $(SBINDEST)
 	install -s ddcprobe/ddcxinfos pnp_serial/pnp_serial $(SBINDEST)
 
 	for i in *.pm ; do perl -pe '$$_ = "\n" if /\s*use\s+(diagnostics|vars|strict)/' $$i > $(LIBDEST)/$$i ; done
diff --git a/perl-install/ftp.pm b/perl-install/ftp.pm
index bfabc5abf..bef562dad 100644
--- a/perl-install/ftp.pm
+++ b/perl-install/ftp.pm
@@ -27,8 +27,8 @@ sub fromEnv() {
 
 sub new {
     my ($host, $prefix, $login, $password) = @_;
-    my @l = do { if ($hosts{$host}) {
-	@{$hosts{$host}};
+    my @l = do { if ($hosts{"$host$prefix"}) {
+	@{$hosts{"$host$prefix"}};
     } else {
 	my %options = (Passive => 1);
 	$options{Firewall} = $ENV{PROXY} if $ENV{PROXY};
@@ -44,7 +44,7 @@ sub new {
 	$ftp->cwd($prefix);
 
 	my @l = ($ftp, \ (my $retr = undef));
-	$hosts{$host} = \@l;
+	$hosts{"$host$prefix"} = \@l;
 	@l;
     }};
     wantarray ? @l : $l[0];
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index 635aae38f..010bc84e6 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -601,7 +601,9 @@ sub main {
 	   "DRAKX_PASSWORD=$o->{lilo}{password}\n",
 	   'DRAKX_USERS="', join(" ", map { $_->{name} } @{$o->{users} || []}), qq("\n));
     run_program::rooted($o->{prefix}, "/etc/security/msec/init.sh", $o->{security});
-#    unlink "$o->{prefix}/tmp/secure.DrakX";
+    unlink "$o->{prefix}/tmp/secure.DrakX";
+
+    run_program::rooted($o->{prefix}, "kudzu", "-q"); # -q <=> fermetagueuleconnard
 
     fs::write($o->{prefix}, $o->{fstab}, $o->{manualFstab});
     modules::write_conf("$o->{prefix}/etc/conf.modules", 'append');
@@ -609,6 +611,9 @@ sub main {
     install_any::lnx4win_postinstall($o->{prefix}) if $o->{lnx4win};
     install_any::killCardServices();
 
+    #- have the really bleeding edge ddebug.log for this f*cking msec :-/
+    eval { commands::cp('-f', "/tmp/ddebug.log", "$o->{prefix}/root") };
+
     #- ala pixel? :-) [fpons]
     sync(); sync();
 
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index 4de59ed3a..ef9fe5114 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -193,7 +193,7 @@ sub installPackages($$) {
     my ($o, $packages) = @_;
 
     #- hack to ensure proper ordering for installation of packages.
-    my @firstToInstall = qw(basesystem sed);
+    my @firstToInstall = qw(setup basesystem sed);
     my %firstInstalled;
     my @toInstall;
     foreach (@firstToInstall) {
@@ -215,8 +215,6 @@ sub afterInstallPackages($) {
     #-  why not? cuz weather is nice today :-) [pixel]
     sync(); sync();
 
-    run_program::rooted($o->{prefix}, "kudzu", "-q"); # -q <=> fermetagueuleconnard
-
     $o->pcmciaConfig();
 
     #- miscellaneous
@@ -268,7 +266,7 @@ sub pppConfig {
 
     my %toreplace;
     $toreplace{$_} = $o->{modem}{$_} foreach qw(connection phone login passwd auth domain);
-    $toreplace{kpppauth} = ${{ 'Script-based' => 0, PAP => 1, 'Terminal-based' => 2, CHAP => 3, }}{$o->{modem}{auth}};
+    $toreplace{kpppauth} = ${{ 'Script-based' => 0, PAP => 1, 'Terminal-based' => 2, CHAP => 3, }}{$o->{modem}{auth}}; #'
     $toreplace{phone} =~ s/[^\d]//g;
     $toreplace{dnsserver} = join '', map { "$o->{modem}{$_}," } "dns1", "dns2";
 
@@ -566,7 +564,7 @@ sub miscellaneous {
     $ENV{SECURE_LEVEL} = $o->{security};
 
     cat_("/proc/cmdline") =~ /mem=(\S+)/;
-    add2hash_($o->{miscellaneous} ||= {}, { numlock => !$o->{pcmcia}, $1 ? (memsize => $1 + 3) : () });
+    add2hash_($o->{miscellaneous} ||= {}, { numlock => !$o->{pcmcia}, $1 ? (memsize => $1) : () });
 }
 
 #------------------------------------------------------------------------------
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
index 51ea451b6..7afb02d4b 100644
--- a/perl-install/install_steps_gtk.pm
+++ b/perl-install/install_steps_gtk.pm
@@ -16,11 +16,8 @@ use Gtk;
 use Gtk::XmHTML;
 use devices;
 use fsedit;
-use keyboard;
-use network;
 use modules;
 use install_steps;
-use run_program;
 use install_steps_interactive;
 use interactive_gtk;
 use install_any;
@@ -264,9 +261,9 @@ sub doPartitionDisks($$) {
 sub choosePackages {
     my ($o, $packages, $compss, $compssUsers, $first_time) = @_;
 
-    if ($::beginner) {	
+    if ($::beginner) {
 	require pkgs;
-	pkgs::setSelectedFromCompssList_($o->{compssListLevels}, $o->{packages}, install_any::getAvailableSpace($o) * 0.7, $o->{installClass}, $o->{lang}, $o->{isUpgrade});
+	pkgs::setSelectedFromCompssList_($o->{compssListLevels}, $o->{packages}, install_any::getAvailableSpace($o) * 0.7, $o->{installClass}, $o->{isUpgrade});
     } else {
 	pkgs::setSelectedFromCompssList($o->{compssListLevels}, $o->{packages}, 90, $o->{installClass}) unless $::expert || $o->{isUpgrade};
 	install_steps_interactive::choosePackages(@_);
@@ -300,7 +297,7 @@ sub chooseSizeToInstall {
     ($o->{packages_}{ind}, $o->{packages_}{select_level}) = 
       pkgs::setSelectedFromCompssList_($o->{compssListLevels}, $o->{packages}, 
 				       pkgs::invCorrectSize($spin->get_value_as_int) * sqr(1024), 
-				       $o->{installClass}, $o->{lang}, $o->{isUpgrade});
+				       $o->{installClass}, $o->{isUpgrade});
 }
 sub choosePackagesTree {
     my ($o, $packages, $compss, $compssUsers) = @_;
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 2254b5fcc..57eca154f 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -692,6 +692,7 @@ _("Default") => { val => \$default, type => 'bool' },
 	$o->ask_warn('', 
 		     [ _("Installation of LILO failed. The following error occured:"),
 		       grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
+	unlink "$o->{prefix}/tmp/.error";
 	die "already displayed";
     }
 }
diff --git a/perl-install/interactive_gtk.pm b/perl-install/interactive_gtk.pm
index 089b09e7f..00ec1731a 100644
--- a/perl-install/interactive_gtk.pm
+++ b/perl-install/interactive_gtk.pm
@@ -208,13 +208,15 @@ sub wait_messageW($$$) {
 	   gtkpack(new Gtk::VBox(0,0),
 		   @$messages,
 		   $w->{wait_messageW} = new Gtk::Label($W)));
-    $w->sync;
+    $w->{wait_messageW}->signal_connect(expose_event => sub { $w->{displayed} = 1 });
+    $w->sync until $w->{displayed};
     $w;
 }
 sub wait_message_nextW {
     my ($o, $messages, $w) = @_;
+    $w->{displayed} = 0;
     $w->{wait_messageW}->set(join "\n", @$messages);
-    $w->sync;
+    $w->flush until $w->{displayed};
 }
 sub wait_message_endW {
     my ($o, $w) = @_;
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
index b671de21e..66040a4b7 100644
--- a/perl-install/modules.pm
+++ b/perl-install/modules.pm
@@ -28,7 +28,7 @@ my @drivers_by_category = (
   "ac3200" => "Ansel Communication AC3200",
   "acenic" => "AceNIC Gigabit Ethernet",
   "pcnet32" => "AMD PC/Net 32",
-#  "apricot" => "Apricot 82596",  # now builtin the kernel
+  "82596" => "Apricot 82596",
 #  "atp" => "ATP", # builtin the kernel
   "cs89x0" => "CS89x0",
   "de4x5" => "Digital 425,434,435,450,500",
@@ -70,7 +70,6 @@ my @drivers_by_category = (
   "wd" => "WD8003, WD8013 and compatible",
   "yellowfin" => "Symbios Yellowfin G-NIC",
 
-  "82596" => "82596",
   "8390" => "8390",
   "dmfe" => "dmfe",
   "dummy" => "dummy",
@@ -87,28 +86,18 @@ my @drivers_by_category = (
   "sunrpc" => "sunrpc",
 }],
 [ 'scsi', {
-  "DAC960" => "Mylex DAC960",
   "aha152x" => "Adaptec 152x",
   "aha1542" => "Adaptec 1542",
   "aha1740" => "Adaptec 1740",
   "aic7xxx" => "Adaptec 2740, 2840, 2940",
   "advansys" => "AdvanSys Adapters",
-#  "dpt" => "Distributed Tech SmartCache/Raid I-IV Controller", # not there anymore?
   "in2000" => "Always IN2000",
   "AM53C974" => "AMD SCSI",
-  "megaraid" => "AMI MegaRAID",
   "BusLogic" => "BusLogic Adapters",
-  "cpqarray" => "Compaq Smart-2/P RAID Controller",
   "dtc" => "DTC 3180/3280",
-  "eata" => "EATA SCSI PM2x24/PM3224",
-  "eata_dma" => "EATA DMA Adapters",
-  "eata_pio" => "EATA PIO Adapters",
   "seagate" => "Future Domain TMC-885, TMC-950",
   "fdomain" => "Future Domain TMC-16x0",
-  "gdth" => "ICP Disk Array Controller",
   "initio" => "Initio",
-  "ips" => "IBM ServeRAID controller",
-  "ppa" => "Iomega PPA3 (parallel port Zip)",
   "g_NCR5380" => "NCR 5380",
   "NCR53c406a" => "NCR 53c406a",
   "53c7,8xx" => "NCR 53c7xx",
@@ -124,21 +113,32 @@ my @drivers_by_category = (
   "wd7000" => "Western Digital wd7000",
 
   "a100u2w" => "a100u2w",
-  "atp870u" => "atp870u",
+  "atp870u" => "atp870u (Acard/Artop)",
   "dc395x_trm" => "dc395x_trm",
   "ide-scsi" => "ide-scsi",
-  "imm" => "Iomega Zip (new driver)",
   "psi240i" => "psi240i",
   "qlogicfc" => "qlogicfc",
   "sim710" => "sim710",
-  "st" => "st",
   "sym53c416" => "sym53c416",
   "tmscsim" => "tmscsim",
 }],
+[ 'disk', {
+  "DAC960" => "Mylex DAC960",
+#  "dpt" => "Distributed Tech SmartCache/Raid I-IV Controller", # not there anymore?
+  "megaraid" => "AMI MegaRAID",
+  "cpqarray" => "Compaq Smart-2/P RAID Controller",
+  "gdth" => "ICP Disk Array Controller",
+  "ips" => "IBM ServeRAID controller",
+  "eata" => "EATA SCSI PM2x24/PM3224",
+  "eata_pio" => "EATA PIO Adapters",
+  "eata_dma" => "EATA DMA Adapters",
+  "st" => "st",
+  "ppa" => "Iomega PPA3 (parallel port Zip)",
+  "imm" => "Iomega Zip (new driver)",
+}],
 [ 'cdrom', {
   "sbpcd" => "SoundBlaster/Panasonic",
   "aztcd" => "Aztech CD",
-#  "bpcd" => "Backpack CDROM", # not there anymore?
   "gscd" => "Goldstar R420",
   "isp16" => "ISP16/MAD16/Mozart",
   "mcd" => "Mitsumi",
@@ -200,6 +200,26 @@ my @drivers_by_category = (
   "ds" => "PCMCIA card support",
   "i82365" => "PCMCIA i82365 controller",
 }],
+[ 'paride', {
+  "aten" => "ATEN EH-100",
+  "bpck" => "Microsolutions backpack",
+  "comm" => "DataStor (older type) commuter adapter",
+  "dstr" => "DataStor EP-2000",
+  "epat" => "Shuttle EPAT",
+  "epia" => "Shuttle EPIA",
+  "fit2" => "Fidelity Intl. (older type)",
+  "fit3" => "Fidelity Intl. TD-3000",
+  "frpw" => "Freecom Power",
+  "friq" => "Freecom IQ (ASIC-2)",
+  "kbic" => "KingByte KBIC-951A and KBIC-971A",
+  "ktti" => "KT Tech. PHd",
+  "on20" => "OnSpec 90c20",
+  "on26" => "OnSpec 90c26",
+  "pd"   => "Parallel port IDE disks",
+  "pcd"  => "Parallel port CD-ROM",
+  "pf"   => "Parallel port ATAPI disk",
+  "paride" => "Main parallel port module",
+}],
 [ 'raid', {
   "linear" => "linear",
   "raid0" => "raid0",
@@ -257,11 +277,7 @@ while (my ($k, $v) = each %drivers) {
 
 sub module_of_type($) {
     my ($type) = @_;
-    if ($type eq 'scsi&cdrom') {
-	grep { $drivers{$_}{type} =~ /^(scsi|cdrom)$/ && !exists $scsi_raid{$_} } keys %drivers;
-    } else {
-	grep { $drivers{$_}{type} eq $type } keys %drivers;
-    }
+    grep { $drivers{$_}{type} =~ /^($type)$/ } keys %drivers;
 }
 
 sub text_of_type($) {
diff --git a/perl-install/my_gtk.pm b/perl-install/my_gtk.pm
index ba784340c..d6df3696e 100644
--- a/perl-install/my_gtk.pm
+++ b/perl-install/my_gtk.pm
@@ -65,15 +65,7 @@ sub destroy($) {
 sub DESTROY { goto &destroy }
 sub sync($) {
     my ($o) = @_;
-
-    flush();
-
     show($o);
-
-    my $h = Gtk->idle_add(sub { Gtk->main_quit; 1 });
-    map { Gtk->main } (1..4);
-    Gtk->idle_remove($h);
-
     flush();
 }
 sub flush(;$) {
@@ -218,19 +210,13 @@ sub create_box_with_title($@) {
 
 sub createScrolledWindow($) {
     my ($W) = @_;
-    if (member(ref $W, qw(Gtk::Text))) {
-	gtkpack_(new Gtk::HBox(0,0), 
-		 1, $W, 
-		 0, new Gtk::VScrollbar($W->vadj));
-    } else {
-	my $w = new Gtk::ScrolledWindow(undef, undef);
-	$w->set_policy('automatic', 'automatic');
-	member(ref $W, qw(Gtk::CList Gtk::CTree)) ?
-	  $w->add($W) :
-	    $w->add_with_viewport($W);
-	$W->show;
-	$w
-    }
+    my $w = new Gtk::ScrolledWindow(undef, undef);
+    $w->set_policy('automatic', 'automatic');
+    member(ref $W, qw(Gtk::CList Gtk::CTree Gtk::Text)) ?
+      $w->add($W) :
+      $w->add_with_viewport($W);
+    $W->show;
+    $w
 }
 
 sub create_menu($@) {
@@ -299,7 +285,7 @@ sub _create_window($$) {
     my $f = new Gtk::Frame(undef);
     $w->set_name("Title");
 
-    if ($::isStandalone || $o->{no_border} || 1) {
+    if ($::isStandalone || $o->{no_border} || 1) { # hack
 	gtkadd($w, $f);
     } else {
 	my $t = new Gtk::Table(0, 0, 0);
@@ -326,9 +312,8 @@ sub _create_window($$) {
 
     $w->set_title($title);
 
-    $w->signal_connect("map_event" => sub { c::XSetInputFocus($w->window->XWINDOW); }) if $my_gtk::force_focus || $o->{force_focus};
-    $w->signal_connect("expose_event" => sub { c::XSetInputFocus($w->window->XWINDOW); }) if $my_gtk::force_focus || $o->{force_focus};
-    $w->signal_connect("delete_event" => sub { undef $o->{retval}; Gtk->main_quit });
+    $w->signal_connect(expose_event => sub { c::XSetInputFocus($w->window->XWINDOW); }) if $my_gtk::force_focus || $o->{force_focus};
+    $w->signal_connect(delete_event => sub { undef $o->{retval}; Gtk->main_quit });
     $w->set_uposition(@{$my_gtk::force_position || $o->{force_position}}) if $my_gtk::force_position || $o->{force_position};
 
     $w->signal_connect("key_press_event" => sub {
@@ -521,8 +506,7 @@ sub _ask_from_list {
 			    1, @$l > 15 ? gtkset_usize(createScrolledWindow($list), 200, 280) : $list,
 			    @okcancel || !ref $title ? (0, create_okcancel($o, @okcancel)) : ())
 		  ));
-
-    $o->sync; #- otherwise the moveto is not done
+    $o->show; #- otherwise the moveto is not done
     my $toselect; map_index {
 	$list->append($_);
 	$toselect = $::i if $def && $_ eq $def;
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
index 01d744038..020ccf7c2 100644
--- a/perl-install/pkgs.pm
+++ b/perl-install/pkgs.pm
@@ -145,12 +145,12 @@ sub psUsingHdlist() {
     my $f = install_any::getFile('hdlist') or die "no hdlist found";
     my %packages;
 
-#    my ($noSeek, $end) = 0;
-#    $end = sysseek F, 0, 2 or die "seek failed";
-#    sysseek F, 0, 0 or die "seek failed";
+#-    my ($noSeek, $end) = 0;
+#-    $end = sysseek F, 0, 2 or die "seek failed";
+#-    sysseek F, 0, 0 or die "seek failed";
 
     while (my $header = c::headerRead(fileno $f, 1)) {
-#	 or die "error reading header at offset ", sysseek(F, 0, 1);
+#-	 or die "error reading header at offset ", sysseek(F, 0, 1);
 	my $name = c::headerGetEntry($header, 'name');
 
 	$packages{$name} = {
@@ -512,8 +512,8 @@ sub install($$) {
     };
     my $callbackClose = sub { $packages{$_[0]}{installed} = 1; };
     my $callbackMessage = \&pkgs::installCallback;
-#    my $callbackStart = sub { log::ld("starting installing package ", $_[0]) };
-#    my $callbackProgress = sub { log::ld("progressing installation ", $_[0], "/", $_[1]) };
+#-    my $callbackStart = sub { log::ld("starting installing package ", $_[0]) };
+#-    my $callbackProgress = sub { log::ld("progressing installation ", $_[0], "/", $_[1]) };
 
     #- do not modify/translate the message used with installCallback since
     #- these are keys during progressing installation, or change in other
diff --git a/update_kernel b/update_kernel
index 082d01051..7eb75ff3a 100755
--- a/update_kernel
+++ b/update_kernel
@@ -6,10 +6,10 @@ function f() {
     v=`perl -Iperl-install -e "use modules; print qq(\\$_.o\n) foreach modules::module_of_type(\"$1\")"` 
 }
 
-f "scsi" ; SCSI_DRIVERS=$v
+f "scsi|disk" ; SCSI_DRIVERS=$v
 f "net" ; NETWORK_DRIVERS=$v
-f "scsi&cdrom" ; CD_DRIVERS=$v
-f "pcmcia" ; PCMCIA_DRIVERS=$v
+f "scsi|cdrom" ; CD_DRIVERS=$v
+f "pcmcia|paride" ; PCMCIA_DRIVERS=$v
 
 MISCMODULES="lp.o parport_pc.o parport.o loop.o"
 FSMODULES="vfat.o fat.o"
@@ -19,6 +19,7 @@ CDROM_MODULES="  $FSMODULES $CD_DRIVERS"
 HD_MODULES="     $MISCMODULES $FSMODULES $SCSI_DRIVERS"
 PCMCIA_MODULES=" $MISCMODULES $FSMODULES $PCMCIA_DRIVERS 8390.o lockd.o nfs.o sunrpc.o"
 LNX4WIN_MODULES="$FSMODULES loop.o isofs.o"
+NOT_USEFULL_IN_STAGE1="nls_*.o parport_probe.o raid*.o serial.o smbfs.o usb-*.o"
 
 echo $NETWORK_DRIVERS
 
@@ -45,7 +46,7 @@ install -d lnx4win/initrd/modules
     ls $PCMCIA_MODULES  | cpio --quiet -H crc -o | gzip -9 > pcmcia_modules.cgz
     cp $PCMCIA_INSTALLMODULES ../install_pcmcia_modules/
     cp -f $LNX4WIN_MODULES modules.dep ../lnx4win/initrd/modules
-    rm -f $NETWORK_MODULES $CDROM_MODULES $HD_MODULES $PCMCIA_MODULES $PCMCIA_INSTALLMODULES nls_*.o # leave in the directory non-install1 used modules
+    rm -f $NETWORK_MODULES $CDROM_MODULES $HD_MODULES $PCMCIA_MODULES $PCMCIA_INSTALLMODULES $NOT_USEFULL_IN_STAGE1 # leave in the directory non-install1 used modules
 )
 
 cp -f vmlinuz /export/lnx4win