summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorTill Kamppeter <tkamppeter@mandriva.com>2003-02-14 23:48:59 +0000
committerTill Kamppeter <tkamppeter@mandriva.com>2003-02-14 23:48:59 +0000
commita7759e59f17339920553a03e31230dbc20c68d1c (patch)
tree562505c94eda4a269457c659ec59f9862af7146f
parent2ec37355a7a644be263e1c35f4afc3d6256a5b96 (diff)
downloaddrakx-backup-do-not-use-a7759e59f17339920553a03e31230dbc20c68d1c.tar
drakx-backup-do-not-use-a7759e59f17339920553a03e31230dbc20c68d1c.tar.gz
drakx-backup-do-not-use-a7759e59f17339920553a03e31230dbc20c68d1c.tar.bz2
drakx-backup-do-not-use-a7759e59f17339920553a03e31230dbc20c68d1c.tar.xz
drakx-backup-do-not-use-a7759e59f17339920553a03e31230dbc20c68d1c.zip
Improved manual scanner configuration, bug fixes.
-rwxr-xr-xperl-install/scanner.pm44
-rwxr-xr-xperl-install/standalone/scannerdrake218
2 files changed, 175 insertions, 87 deletions
diff --git a/perl-install/scanner.pm b/perl-install/scanner.pm
index b0a6fef1e..30a033d93 100755
--- a/perl-install/scanner.pm
+++ b/perl-install/scanner.pm
@@ -204,6 +204,40 @@ sub detect {
return @res;
}
+sub get_usb_ids_for_port {
+ my ($port) = @_;
+ my $vendorid;
+ my $productid;
+ if ($port =~ /^\s*libusb:(\d+):(\d+)\s*$/) {
+ # Use "lsusb" to find the USB IDs
+ open DETECT, "LC_ALL=C lsusb -s $1:$2 |";
+ while (my $line = <DETECT>) {
+ if ($line =~ /ID\s+([0-9a-f]+):(0x[0-9a-f]+)($|\s+)/) {
+ # Scanner connected via scanner.o kernel module
+ $vendorid = "0x$1";
+ $productid = "0x$2";
+ last;
+ }
+ }
+ close DETECT;
+ } else {
+ # Run "sane-find-scanner" on the port
+ open DETECT, "LC_ALL=C sane-find-scanner -q $port |";
+ while (my $line = <DETECT>) {
+ if ($line =~ /^\s*found\s+USB\s+scanner/i) {
+ if ($line =~ /vendor=(0x[0-9a-f]+)[^0-9a-f]+.*prod(|uct)=(0x[0-9a-f]+)[^0-9a-f]+/) {
+ # Scanner connected via scanner.o kernel module
+ $vendorid = $1;
+ $productid = $3;
+ last;
+ }
+ }
+ }
+ close DETECT;
+ }
+ return ($vendorid, $productid);
+}
+
sub readScannerDB {
my ($file) = @_;
my ($card, %cards);
@@ -306,7 +340,13 @@ sub updateScannerDBfromSane {
}
}
- foreach my $f (glob_("$_sanesrcdir/*.desc")) {
+ my @descfiles;
+ push (@descfiles,
+ glob_("$_sanesrcdir/doc/descriptions/*.desc"));
+ push (@descfiles,
+ glob_("$_sanesrcdir/doc/descriptions-external/*.desc"));
+
+ foreach my $f (@descfiles) {
my $F = common::openFileMaybeCompressed($f);
$to_add .= "\n# from $f";
my ($lineno, $cmd, $val) = 0;
@@ -321,7 +361,7 @@ sub updateScannerDBfromSane {
if (0 && member($name, keys %$scanner::scannerDB)) {
print "#[$name] already in ScannerDB!\n";
} else {
- # SANE bug "snapscan" calls itself "SnapScan"
+ # SANE bug: "snapscan" calls itself "SnapScan"
$backend =~ s/SnapScan/snapscan/g;
$to_add .= "\nNAME $name\nSERVER $backend\nDRIVER $intf\n";
# Go through the configuration lines of
diff --git a/perl-install/standalone/scannerdrake b/perl-install/standalone/scannerdrake
index 99b045148..2901644c0 100755
--- a/perl-install/standalone/scannerdrake
+++ b/perl-install/standalone/scannerdrake
@@ -74,8 +74,6 @@ sub removeverticalbar {
}
sub auto {
- #use Data::Dumper;
- #print Dumper (@f);
my $changed = 0;
foreach (@f) {
if (member($_->{val}{DESCRIPTION}, keys %$scanner::scannerDB)) {
@@ -86,26 +84,153 @@ sub auto {
next;
}
if ($in->ask_yesorno('Scannerdrake',N("%s found on %s, configure it automatically?",removeverticalbar($name),$_->{port}),1)) {
- $changed ||= (tryConfScanner($name, $_->{port}) or
- manual());
+ $changed ||= (tryConfScanner($name, $_->{port},
+ $_->{val}{vendor},
+ $_->{val}{id}) or
+ manual($_->{port}, $_->{val}{vendor},
+ $_->{val}{id}, $name));
} else {
- $changed ||= manual();
+ $changed ||= manual($_->{port}, $_->{val}{vendor},
+ $_->{val}{id}, $name);
}
} else {
- $in->ask_yesorno('Scannerdrake',N("%s is not in the scanner database, configure it manually?", removeverticalbar($_->{val}{DESCRIPTION})),1) and manual();
+ $in->ask_yesorno('Scannerdrake',
+ N("%s is not in the scanner database, configure it manually?",
+ removeverticalbar($_->{val}{DESCRIPTION})),1)
+ and ($changed ||=
+ manual($_->{port}, $_->{val}{vendor}, $_->{val}{id},
+ $_->{val}{DESCRIPTION}));
}
}
return $changed;
}
sub manual {
- my $s = $in->ask_from_treelist('Scannerdrake', N("Select a scanner"), '|', [' None', keys %$scanner::scannerDB], '') or return 0;
+ my ($port, $vendor, $product, $name) = @_;
+ my $s =
+ $in->ask_from_treelist('Scannerdrake',
+ N("Select a scanner model") .
+ if_($port || $name, N(" (")) .
+ if_($name, N("Detected model: %s",
+ removeverticalbar($name))) .
+ if_($port && $name, N(", ")) .
+ if_($port, N("Port: %s", $port)) .
+ if_($port || $name, N(")")),
+ '|', [' None', keys %$scanner::scannerDB],
+ '') or return 0;
return 0 if $s eq ' None';
if ($scanner::scannerDB->{$s}{flags}{unsupported}) {
$in->ask_warn('Scannerdrake', N("The %s is not supported by this version of Mandrake Linux.", removeverticalbar($s)));
return 0;
}
- return tryConfScanner($s);
+ return tryConfScanner($s, $port, $vendor, $product);
+}
+
+sub dynamic {
+ @f = scanner::detect();
+ foreach (@f) {
+ if (member($_->{val}{DESCRIPTION}, keys %$scanner::scannerDB)) {
+ my $name = $_->{val}{DESCRIPTION};
+ $name =~ s/\s$//; #some HP entry have a trailing space, i will correct usbtable asap
+ if ($scanner::scannerDB->{$name}{flags}{unsupported}) {
+ $in->ask_warn('Scannerdrake', N("The %s is not supported by this version of Mandrake Linux.", removeverticalbar($name)));
+ next;
+ }
+ scanner::confScanner($name, $_->{port},
+ $_->{val}{vendor}, $_->{val}{id});
+ } else {
+ $in->ask_warn('Scannerdrake', N("The %s is not known by this version of Scannerdrake.", removeverticalbar($name)));
+ }
+ }
+}
+
+sub tryConfScanner {
+ # take care if interactive output is needed (unsupported, parallel..)
+ my ($model, $port, $vendor, $product) = @_;
+ if ($scanner::scannerDB->{$model}{flags}{unsupported}) {
+ $in->ask_warn('Scannerdrake', N("The %s is unsupported",
+ removeverticalbar($model)));
+ return 0;
+ }
+ if (($scanner::scannerDB->{$model}{ask} =~ /DEVICE/) || (!$port)){
+ $port ||= N("Auto-detect available ports");
+ $in->ask_from('Scannerdrake',
+ N("Please select the device where your %s is attached", removeverticalbar($model)) . " " .
+ N("(Note: Parallel ports cannot be auto-detected)"),
+ [
+ { label => N("choose device"),
+ val => \$port,
+ list => [N("Auto-detect available ports"),
+ '/dev/scanner',
+ '/dev/usb/scanner0',
+ '/dev/usb/scanner1',
+ '/dev/usb/scanner2',
+ 'libusb:001:001',
+ 'libusb:001:002',
+ 'libusb:001:003',
+ 'libusb:001:004',
+ 'libusb:001:005',
+ 'libusb:001:006',
+ 'libusb:001:007',
+ 'libusb:001:008',
+ 'libusb:001:009',
+ 'libusb:001:010',
+ '/dev/sg0',
+ '/dev/sg1',
+ '/dev/sg2',
+ '/dev/sg3',
+ '/dev/sg4',
+ '/dev/parport0',
+ '/dev/parport1',
+ '/dev/parport2',
+ '/dev/pt_drv',
+ '/dev/ttyS0',
+ '/dev/ttyS1',
+ '/dev/ttyS2'],
+ not_edit => 0, sort => 0 },
+ ],
+ ) or return 0;
+ if ($port eq N("Auto-detect available ports")) {
+ $wait = $in->wait_message(N("Scannerdrake"),
+ N("Searching for scanners ..."));
+ my @d = scanner::detect();
+ undef $wait;
+ my @list = map {
+ $_->{port} . " (" .
+ removeverticalbar($_->{val}{DESCRIPTION}) . ")";
+ } @d;
+ $port ||= $list[0];
+ $in->ask_from('Scannerdrake',
+ N("Please select the device where your %s is attached", removeverticalbar($model)),
+ [
+ { label => N("choose device"),
+ val => \$port,
+ list => \@list,
+ not_edit => 1, sort => 0 },
+ ],
+ ) or return 0;
+ $port =~ s/^\s*([^\(\s]*)\s*\(.*$/$1/;
+ foreach (@d) {
+ next if $_->{port} ne $port;
+ $vendor = $_->{val}{vendor};
+ $product = $_->{val}{id};
+ last;
+ }
+ }
+ }
+ ($vendor, $product) = scanner::get_usb_ids_for_port($port);
+ if ($scanner::scannerDB->{$model}{server} =~ /(printerdrake|hpoj)/i) {
+ $in->ask_warn('Scannerdrake', N("The %s must be configured by printerdrake.\nYou can launch printerdrake from the Mandrake Control Center in Hardware section.", removeverticalbar($model)));
+ return 0;
+ }
+ scanner::confScanner($model, $port, $vendor, $product);
+ $in->ask_warn(N("Congratulations!"),
+ N("Your %s has been configured.\nYou may now scan documents using \"XSane\" from Multimedia/Graphics in the applications menu.", removeverticalbar($model)));
+ return 1;
+}
+
+sub quit {
+ $::isEmbedded ? kill('USR1', $::CCPID) : $in->exit(0);
}
sub mainwindow {
@@ -210,83 +335,6 @@ sub mainwindow {
}
}
-sub dynamic {
- @f = scanner::detect();
- foreach (@f) {
- if (member($_->{val}{DESCRIPTION}, keys %$scanner::scannerDB)) {
- my $name = $_->{val}{DESCRIPTION};
- $name =~ s/\s$//; #some HP entry have a trailing space, i will correct usbtable asap
- if ($scanner::scannerDB->{$name}{flags}{unsupported}) {
- $in->ask_warn('Scannerdrake', N("The %s is not supported by this version of Mandrake Linux.", removeverticalbar($name)));
- next;
- }
- scanner::confScanner($name, $_->{port},
- $_->{val}{vendor}, $_->{val}{id});
- } else {
- $in->ask_warn('Scannerdrake', N("The %s is not known by this version of Scannerdrake.", removeverticalbar($name)));
- }
- }
-}
-
-sub tryConfScanner {
- # take care if interactive output is needed (unsupported, parallel..)
- my ($model, $port) = @_;
- if ($scanner::scannerDB->{$model}{flags}{unsupported}) {
- $in->ask_warn('Scannerdrake', N("The %s is unsupported",
- removeverticalbar($model)));
- return 0;
- }
- if (($scanner::scannerDB->{$model}{ask} =~ /DEVICE/) || (!$port)){
- $port = '/dev/usb/scanner0';
- $in->ask_from('Scannerdrake',
- N("Please select the device where your %s is attached", removeverticalbar($model)),
- [
- { label => N("choose device"),
- val => \$port,
- list => ['/dev/scanner',
- '/dev/usb/scanner0',
- '/dev/usb/scanner1',
- '/dev/usb/scanner2',
- 'libusb:001:001',
- 'libusb:001:002',
- 'libusb:001:003',
- 'libusb:001:004',
- 'libusb:001:005',
- 'libusb:001:006',
- 'libusb:001:007',
- 'libusb:001:008',
- 'libusb:001:009',
- 'libusb:001:010',
- '/dev/sg0',
- '/dev/sg1',
- '/dev/sg2',
- '/dev/sg3',
- '/dev/sg4',
- '/dev/parport0',
- '/dev/parport1',
- '/dev/parport2',
- '/dev/pt_drv',
- '/dev/ttyS0',
- '/dev/ttyS1',
- '/dev/ttyS2'],
- not_edit => 0, sort => 0 },
- ],
- ) or return 0;
- }
- if ($scanner::scannerDB->{$model}{server} =~ /(printerdrake|hpoj)/i) {
- $in->ask_warn('Scannerdrake', N("The %s must be configured by printerdrake.\nYou can launch printerdrake from the Mandrake Control Center in Hardware section.", removeverticalbar($model)));
- return 0;
- }
- scanner::confScanner($model,$port);
- $in->ask_warn(N("Congratulations!"),
- N("Your %s has been configured.\nYou may now scan documents using \"XSane\" from Multimedia/Graphics in the applications menu.", removeverticalbar($model)));
- return 1;
-}
-
-sub quit {
- $::isEmbedded ? kill('USR1', $::CCPID) : $in->exit(0);
-}
-
sub makeexportmenues {
my @exports = @_;
my %menuexports = map {