untouched

7 files changed, 3247 insertions, 0 deletions

diff --git a/proxy_wizard/scripts/dfh.sh b/proxy_wizard/scripts/dfh.sh
new file mode 100755
index 00000000..8ab8956a
--- /dev/null
+++ b/proxy_wizard/scripts/dfh.sh
@@ -0,0 +1,38 @@
+#!/bin/bash
+# 
+# Wizard
+#
+# Copyright (C) 2000,2001 Mandrakesoft.
+# 
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# See file LICENSE for further informations on licensing terms.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+# 
+# Authors: Jerome Dumonteil, Maurizio De Cecco, Enzo Maggi
+# icons: Helene Durosini <ln@mandrakesoft.com>
+# <corporate@mandrakesoft.com> http://www.mandrakesoft.com
+
+# 
+# squid	wizard
+
+r='/var/spool/squid'
+howmany(){
+	[ -n "$1" ] && { 
+		[ -d "$1" ] && df -h "$1" || howmany ${1%/*}
+	} || {
+	howmany '/'
+	}
+}
+
+howmany $r|tail -1
diff --git a/proxy_wizard/scripts/do_it_squid.sh b/proxy_wizard/scripts/do_it_squid.sh
new file mode 100755
index 00000000..28b2de1f
--- /dev/null
+++ b/proxy_wizard/scripts/do_it_squid.sh
@@ -0,0 +1,264 @@
+#!/bin/bash
+# 
+# Wizard
+#
+# Copyright (C) 2000,2001 Mandrakesoft.
+# 
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# See file LICENSE for further informations on licensing terms.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+# 
+# Authors: Jerome Dumonteil, Maurizio De Cecco, Enzo Maggi
+# icons: Helene Durosini <ln@mandrakesoft.com>
+# <corporate@mandrakesoft.com> http://www.mandrakesoft.com
+
+# 
+# squid	wizard
+#	
+# This script sets up proxy params
+#
+
+
+#store wizard config values
+file=/etc/sysconfig/mdk_serv
+
+service squid stop
+
+chg_val ${file} wiz_squid_defdir ${wiz_squid_defdir}
+chg_val ${file} wiz_squid_level ${wiz_squid_level}
+
+
+
+# find squid config file
+export conf=/etc/squid/squid.conf
+
+[ -f ${conf} ] || {
+	[ -d "/etc/squid" ] || exit 1
+	cp -f ${CWD}/scripts/squid.conf.default ${conf}
+}
+
+# backup squid config file
+bck_file ${conf}
+
+
+
+
+
+echo_debug "squid port  ${wiz_squid_port}"
+chg_val2 ${conf} http_port ${wiz_squid_port}
+
+
+
+echo_debug "squid mem  ${wiz_squid_mem}"
+chg_val2 ${conf} cache_mem "${wiz_squid_mem} MB"
+
+
+
+echo_debug "squid disk  ${wiz_squid_disk}"
+
+t=`grep -E "^[[:space:]]*cache_dir[[:space:]]+[a-z]+[[:space:]]+${wiz_squid_defdir}[[:space:]]+[0-9]+" ${conf}`
+
+if [ -n "$t" ]; then
+	tpe=`echo $t|awk '{print $2}'`
+	opt=`echo $t|awk '{print $5" "$6" "$7" "$8" "$9}'`
+	
+	TMPFILE=`mktemp /tmp/temp.XXXXXX` || exit 1
+	cat "${conf}" > ${TMPFILE}
+    (cat ${TMPFILE}\
+|sed -e '\£^[[:space:]]*cache_dir[[:space:]]\+'"${tpe}"'[[:space:]]\+'"${wiz_squid_defdir}"'[[:space:]]\+[0-9]\+.*$£{
+i \
+# removed by mdk_serv script on '"$(date)"'
+s££#&£
+a \
+'"cache_dir ${tpe} ${wiz_squid_defdir} ${wiz_squid_disk} ${opt}"'
+}
+' > "${conf}") && rm -f ${TMPFILE}
+
+else
+	echo -e "\
+# added by mdk_serv script on $(date)\n\
+cache_dir ufs ${wiz_squid_defdir} ${wiz_squid_disk} 16 256\n\
+" >> "${conf}"
+fi
+
+
+
+
+
+
+
+
+echo_debug "squid ACL  ${wiz_squid_level} ${wiz_squid_mynetw}"
+
+# ACL first step, define an acl definition for "mynetwork", like :
+# acl mynetwork src 192.168.1.0/255.255.255.0
+
+t=`grep -E "^[[:space:]]*acl[[:space:]]+mynetwork[[:space:]]+src[[:space:]]+" ${conf}`
+
+TMPFILE=`mktemp /tmp/temp.XXXXXX` || exit 1
+cat "${conf}" > ${TMPFILE}
+
+if [ -n "$t" ]; then
+    (cat ${TMPFILE}\
+|sed -e '\£^[[:space:]]*acl[[:space:]]\+mynetwork[[:space:]]\+src[[:space:]]\+.*$£{
+i \
+# removed by mdk_serv script on '"$(date)"'
+s££#&£
+a \
+'"acl mynetwork src ${wiz_squid_mynetw}"'
+}
+' > "${conf}") && rm -f ${TMPFILE}
+else
+    (cat ${TMPFILE}\
+|sed -e '\£^[[:space:]]*acl[[:space:]]\+all[[:space:]]\+src[[:space:]]\+.*$£{
+a \
+# added by mdk_serv script on '"$(date)"'
+a \
+'"acl mynetwork src ${wiz_squid_mynetw}"'
+}
+' > "${conf}") && rm -f ${TMPFILE}
+fi
+
+
+
+# ACL second step, insert the control rule from the chosen level
+
+TMPFILE=`mktemp /tmp/temp.XXXXXX` || exit 1
+cat "${conf}" > ${TMPFILE}
+
+case ${wiz_squid_level} in
+	1) # all
+		sed -e '\£^[[:space:]]*http_access[[:space:]]\+deny[[:space:]]\+all[[:space:]]*.*$£{
+i \
+# changed by mdk_serv script on '"$(date)"'
+s££#&£
+a \
+'"http_access allow all"'
+}' ${TMPFILE} > ${conf}
+
+	;;
+
+	2) # local network
+		sed -e '\£^[[:space:]]*http_access[[:space:]]\+allow[[:space:]]\+all[[:space:]]*.*$£{
+i \
+# changed by mdk_serv script on '"$(date)"'
+s££#&£
+a \
+'"http_access deny all"'
+}' ${TMPFILE} > ${conf}
+
+
+cat ${conf} > ${TMPFILE}
+		sed -e '\£^[[:space:]]*http_access[[:space:]]\+allow[[:space:]]\+localhost[[:space:]]*.*$£{
+i \
+# changed by mdk_serv script on '"$(date)"'
+s££#&£
+a \
+'"http_access allow mynetwork"'
+}' ${TMPFILE} > ${conf}
+
+	;;
+	
+	3)
+		sed -e '\£^[[:space:]]*http_access[[:space:]]\+allow[[:space:]]\+all[[:space:]]*.*$£{
+i \
+# changed by mdk_serv script on '"$(date)"'
+s££#&£
+a \
+'"http_access deny all"'
+}' ${TMPFILE} > ${conf}
+
+cat ${conf} > ${TMPFILE}
+
+		sed -e '\£^[[:space:]]*http_access[[:space:]]\+allow[[:space:]]\+mynetwork[[:space:]]*.*$£{
+i \
+# changed by mdk_serv script on '"$(date)"'
+s££#&£
+a \
+'"http_access allow localhost"'
+}' ${TMPFILE} > ${conf}
+
+	;;
+
+	*) # should not happen
+		exit 1
+	;;
+esac
+
+rm -f ${TMPFILE}
+
+
+
+
+
+echo_debug "squid cache peer ${wiz_squid_menupeer} ${wiz_squid_cachepeer} ${wiz_squid_peerport}"
+
+
+t=`grep -E "^[[:space:]]*cache_peer[[:space:]]+" ${conf}`
+
+if [ "${wiz_squid_menupeer}" == "1" -a -n "$t" ];
+# if no peer value, we have to remove the possible cache_peer
+# in the config file
+then
+	TMPFILE=`mktemp /tmp/temp.XXXXXX` || exit 1
+	cat "${conf}" > ${TMPFILE}
+	(cat ${TMPFILE}\
+	|sed -e '\£^[[:space:]]*cache_peer[[:space:]]\+.*$£{
+i \
+# removed by mdk_serv script on '"$(date)"'
+s££#&£
+}
+' > "${conf}") && rm -f ${TMPFILE}
+
+
+elif [ "${wiz_squid_menupeer}" == "2" -a -n "${wiz_squid_cachepeer}" -a -n "$t" ];
+# if the cachepeer value exist, we have to remove the old value of the cache 
+# peer in the config file, then add the new one.
+# WARNING :
+# All this works very badly if more than one cache peer exist in the file
+then
+	TMPFILE=`mktemp /tmp/temp.XXXXXX` || exit 1
+	cat "${conf}" > ${TMPFILE}
+	(cat ${TMPFILE}\
+	|sed -e '\£^[[:space:]]*cache_peer[[:space:]]\+.*$£{
+i \
+# removed by mdk_serv script on '"$(date)"'
+s££#&£
+}
+' > "${conf}") && rm -f ${TMPFILE}
+
+	echo -e \
+"# added by mdk_serv script on $(date)\n\
+cache_peer ${wiz_squid_cachepeer} parent ${wiz_squid_peerport} 3130" \
+	>> ${conf}
+
+
+elif [ "${wiz_squid_menupeer}" == "2" -a -n "${wiz_squid_cachepeer}" -a -z "$t" ];
+# Just need to add the new value to the config file
+then
+echo_debug "hop ${conf}"
+	echo -e \
+"# added by mdk_serv script on $(date)\n\
+cache_peer ${wiz_squid_cachepeer} parent ${wiz_squid_peerport} 3130" \
+	>> ${conf}
+fi
+
+
+#######
+
+/sbin/chkconfig --level 345 squid on
+
+service squid start
+
+exit 10
diff --git a/proxy_wizard/scripts/echolevel.sh b/proxy_wizard/scripts/echolevel.sh
new file mode 100755
index 00000000..45fb40c4
--- /dev/null
+++ b/proxy_wizard/scripts/echolevel.sh
@@ -0,0 +1,31 @@
+#!/bin/bash
+# 
+# Wizard
+#
+# Copyright (C) 2000,2001 Mandrakesoft.
+# 
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# See file LICENSE for further informations on licensing terms.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+# 
+# Authors: Jerome Dumonteil, Maurizio De Cecco, Enzo Maggi
+# icons: Helene Durosini <ln@mandrakesoft.com>
+# <corporate@mandrakesoft.com> http://www.mandrakesoft.com
+
+# 
+# squid	wizard
+
+echo_debug $0 $1
+
+exit $1
diff --git a/proxy_wizard/scripts/printservices.sh b/proxy_wizard/scripts/printservices.sh
new file mode 100755
index 00000000..909fdc9f
--- /dev/null
+++ b/proxy_wizard/scripts/printservices.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+# 
+# Wizard
+#
+# Copyright (C) 2000,2001 Mandrakesoft.
+# 
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# See file LICENSE for further informations on licensing terms.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+# 
+# Authors: Jerome Dumonteil, Maurizio De Cecco, Enzo Maggi
+# icons: Helene Durosini <ln@mandrakesoft.com>
+# <corporate@mandrakesoft.com> http://www.mandrakesoft.com
+
+# 
+# squid	wizard
+
+echo_debug $0
+echo_debug "$wiz_squid_port"
+
+grep -E -s "[[:space:]]$wiz_squid_port/tcp" /etc/services
diff --git a/proxy_wizard/scripts/showlevel.sh b/proxy_wizard/scripts/showlevel.sh
new file mode 100755
index 00000000..fd6e29a2
--- /dev/null
+++ b/proxy_wizard/scripts/showlevel.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+# 
+# Wizard
+#
+# Copyright (C) 2000,2001 Mandrakesoft.
+# 
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# See file LICENSE for further informations on licensing terms.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+# 
+# Authors: Jerome Dumonteil, Maurizio De Cecco, Enzo Maggi
+# icons: Helene Durosini <ln@mandrakesoft.com>
+# <corporate@mandrakesoft.com> http://www.mandrakesoft.com
+
+# 
+# squid	wizard
+
+echo_debug $0
+
+# 
+# Squid access control level
+# 
+# level 1 : all
+# level 2 : local network
+# level 3 : localhost
+
+param="$1"
+
+[ -z "${param}" ] && param=3
+[ ${param} -lt 1 ] && param=1
+[ ${param} -gt 3 ] && param=3
+
+[ -z "$LANG" ] && LANG=en
+
+case "$LANG" in
+
+	fr)
+	case "${param}" in
+
+		1) txt="Tous, pas de restriction d'accès"
+		;;
+		2) txt="${wiz_squid_mynetw}"
+		;;
+		3) txt="Uniquement cette machine"
+		;;
+	esac
+	;;
+	
+	*)
+	case "${param}" in
+		1) txt="All, no access restriction"
+		;;
+		2) txt="${wiz_squid_mynetw}"
+		;;
+		3) txt="Local host only"
+		;;
+	esac
+	;;
+esac
+
+echo_debug "ACL : ${txt}"
+
+echo $txt
+
+exit 0
+
diff --git a/proxy_wizard/scripts/squid.conf.default b/proxy_wizard/scripts/squid.conf.default
new file mode 100644
index 00000000..cd765fec
--- /dev/null
+++ b/proxy_wizard/scripts/squid.conf.default
@@ -0,0 +1,2758 @@
+
+#	WELCOME TO SQUID 2
+#	------------------
+#
+#	This is the default Squid configuration file. You may wish
+#	to look at the Squid home page (http://www.squid-cache.org/)
+#	for the FAQ and other documentation.
+#
+#	The default Squid config file shows what the defaults for
+#	various options happen to be.  If you don't need to change the
+#	default, you shouldn't uncomment the line.  Doing so may cause
+#	run-time problems.  In some cases "none" refers to no default
+#	setting at all, while in other cases it refers to a valid
+#	option - the comments for that keyword indicate if this is the
+#	case.
+#
+
+
+# NETWORK OPTIONS
+# -----------------------------------------------------------------------------
+
+#  TAG: http_port
+#	Usage:	port
+#		hostname:port
+#		1.2.3.4:port
+#
+#	The socket addresses where Squid will listen for HTTP client
+#	requests.  You may specify multiple socket addresses.
+#	There are three forms: port alone, hostname with port, and
+#	IP address with port.  If you specify a hostname or IP
+#	address, then Squid binds the socket to that specific
+#	address.  This replaces the old 'tcp_incoming_address'
+#	option.  Most likely, you do not need to bind to a specific
+#	address, so you can use the port number alone.
+#
+#	The default port number is 3128.
+#
+#	If you are running Squid in accelerator mode, then you
+#	probably want to listen on port 80 also, or instead.
+#
+#	The -a command line option will override the *first* port
+#	number listed here.   That option will NOT override an IP
+#	address, however.
+#
+#	You may specify multiple socket addresses on multiple lines.
+#
+#Default:
+# http_port 3128
+
+#  TAG: icp_port
+#	The port number where Squid sends and receives ICP queries to
+#	and from neighbor caches.  Default is 3130.  To disable use
+#	"0".  May be overridden with -u on the command line.
+#
+#Default:
+# icp_port 3130
+
+#  TAG: htcp_port
+#	The port number where Squid sends and receives HTCP queries to
+#	and from neighbor caches.  Default is 4827.  To disable use
+#	"0".
+#
+#	To enable this option, you must use --enable-htcp with the
+#	configure script.
+#
+#Default:
+# htcp_port 4827
+
+#  TAG: mcast_groups
+#	This tag specifies a list of multicast groups which your server
+#	should join to receive multicasted ICP queries.
+#
+#	NOTE!  Be very careful what you put here!  Be sure you
+#	understand the difference between an ICP _query_ and an ICP
+#	_reply_.  This option is to be set only if you want to RECEIVE
+#	multicast queries.  Do NOT set this option to SEND multicast
+#	ICP (use cache_peer for that).  ICP replies are always sent via
+#	unicast, so this option does not affect whether or not you will
+#	receive replies from multicast group members.
+#
+#	You must be very careful to NOT use a multicast address which
+#	is already in use by another group of caches.
+#
+#	If you are unsure about multicast, please read the Multicast
+#	chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).
+#
+#	Usage: mcast_groups 239.128.16.128 224.0.1.20
+#
+#	By default, Squid doesn't listen on any multicast groups.
+#
+#Default:
+# none
+
+#  TAG: tcp_outgoing_address
+#  TAG: udp_incoming_address
+#  TAG: udp_outgoing_address
+#	Usage: tcp_incoming_address 10.20.30.40
+#	       udp_outgoing_address fully.qualified.domain.name
+#
+#	tcp_outgoing_address	is used for connections made to remote
+#				servers and other caches.
+#	udp_incoming_address	is used for the ICP socket receiving packets
+#				from other caches.
+#	udp_outgoing_address	is used for ICP packets sent out to other
+#				caches.
+#
+#	The default behavior is to not bind to any specific address.
+#
+#	A *_incoming_address value of 0.0.0.0 indicates that Squid should
+#	listen on all available interfaces.
+#
+#	If udp_outgoing_address is set to 255.255.255.255 (the default)
+#	then it will use the same socket as udp_incoming_address. Only
+#	change this if you want to have ICP queries sent using another
+#	address than where this Squid listens for ICP queries from other
+#	caches.
+#
+#	NOTE, udp_incoming_address and udp_outgoing_address can not
+#	have the same value since they both use port 3130.
+#
+#	NOTE, tcp_incoming_address has been removed.  You can now
+#	specify IP addresses on the 'http_port' line.
+#
+#Default:
+# tcp_outgoing_address 255.255.255.255
+# udp_incoming_address 0.0.0.0
+# udp_outgoing_address 255.255.255.255
+
+
+# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
+# -----------------------------------------------------------------------------
+
+#  TAG: cache_peer
+#	To specify other caches in a hierarchy, use the format:
+#
+#		cache_peer hostname type http_port icp_port
+#
+#	For example,
+#
+#	#                                        proxy  icp
+#	#          hostname             type     port   port  options
+#	#          -------------------- -------- ----- -----  -----------
+#	cache_peer parent.foo.net       parent    3128  3130  [proxy-only]
+#	cache_peer sib1.foo.net         sibling   3128  3130  [proxy-only]
+#	cache_peer sib2.foo.net         sibling   3128  3130  [proxy-only]
+#
+#	      type:  either 'parent', 'sibling', or 'multicast'.
+#
+#	proxy_port:  The port number where the cache listens for proxy
+#		     requests.
+#
+#	  icp_port:  Used for querying neighbor caches about
+#		     objects.  To have a non-ICP neighbor
+#		     specify '7' for the ICP port and make sure the
+#		     neighbor machine has the UDP echo port
+#		     enabled in its /etc/inetd.conf file.
+#
+#	    options: proxy-only
+#		     weight=n
+#		     ttl=n
+#		     no-query
+#		     default
+#		     round-robin
+#		     multicast-responder
+#		     closest-only
+#		     no-digest
+#		     no-netdb-exchange
+#		     no-delay
+#		     login=user:password
+#		     connect-timeout=nn
+#		     digest-url=url
+#		     allow-miss
+#
+#		     use 'proxy-only' to specify that objects fetched
+#		     from this cache should not be saved locally.
+#
+#		     use 'weight=n' to specify a weighted parent.
+#		     The weight must be an integer.  The default weight
+#		     is 1, larger weights are favored more.
+#
+#		     use 'ttl=n' to specify a IP multicast TTL to use
+#		     when sending an ICP queries to this address.
+#		     Only useful when sending to a multicast group.
+#		     Because we don't accept ICP replies from random
+#		     hosts, you must configure other group members as
+#		     peers with the 'multicast-responder' option below.
+#
+#		     use 'no-query' to NOT send ICP queries to this
+#		     neighbor.
+#
+#		     use 'default' if this is a parent cache which can
+#		     be used as a "last-resort." You should probably
+#		     only use 'default' in situations where you cannot
+#		     use ICP with your parent cache(s).
+#
+#		     use 'round-robin' to define a set of parents which
+#		     should be used in a round-robin fashion in the
+#		     absence of any ICP queries.
+#
+#		     'multicast-responder' indicates that the named peer
+#		     is a member of a multicast group.  ICP queries will
+#		     not be sent directly to the peer, but ICP replies
+#		     will be accepted from it.
+#
+#		     'closest-only' indicates that, for ICP_OP_MISS
+#		     replies, we'll only forward CLOSEST_PARENT_MISSes
+#		     and never FIRST_PARENT_MISSes.
+#
+#		     use 'no-digest' to NOT request cache digests from
+#		     this neighbor.
+#
+#		     'no-netdb-exchange' disables requesting ICMP
+#		     RTT database (NetDB) from the neighbor.
+#
+#		     use 'no-delay' to prevent access to this neighbor
+#		     from influencing the delay pools.
+#
+#		     use 'login=user:password' if this is a personal/workgroup
+#		     proxy and your parent requires proxy authentication.
+#
+#		     use 'connect-timeout=nn' to specify a peer
+#		     specific connect timeout (also see the
+#		     peer_connect_timeout directive)
+#
+#		     use 'digest-url=url' to tell Squid to fetch the cache
+#		     digest (if digests are enabled) for this host from
+#		     the specified URL rather than the Squid default
+#		     location.
+#
+#		     use 'allow-miss' to disable Squid's use of only-if-cached
+#		     when forwarding requests to siblings. This is primarily
+#		     useful when icp_hit_stale is used by the sibling. To
+#		     extensive use of this option may result in forwarding
+#		     loops, and you should avoid having two-way peerings
+#		     with this option. (for example to deny peer usage on
+#		     requests from peer by denying cache_peer_access if the
+#		     source is a peer)
+#
+#	NOTE: non-ICP neighbors must be specified as 'parent'.
+#
+#Default:
+# none
+
+#  TAG: cache_peer_domain
+#	Use to limit the domains for which a neighbor cache will be
+#	queried.  Usage:
+#
+#	cache_peer_domain cache-host domain [domain ...]
+#	cache_peer_domain cache-host !domain
+#
+#	For example, specifying
+#
+#		cache_peer_domain parent.foo.net	.edu
+#
+#	has the effect such that UDP query packets are sent to
+#	'bigserver' only when the requested object exists on a
+#	server in the .edu domain.  Prefixing the domainname
+#	with '!' means that the cache will be queried for objects
+#	NOT in that domain.
+#
+#	NOTE:	* Any number of domains may be given for a cache-host,
+#		  either on the same or separate lines.
+#		* When multiple domains are given for a particular
+#		  cache-host, the first matched domain is applied.
+#		* Cache hosts with no domain restrictions are queried
+#		  for all requests.
+#		* There are no defaults.
+#		* There is also a 'cache_peer_access' tag in the ACL
+#		  section.
+#
+#Default:
+# none
+
+#  TAG: neighbor_type_domain
+#	usage: neighbor_type_domain parent|sibling domain domain ...
+#
+#	Modifying the neighbor type for specific domains is now
+#	possible.  You can treat some domains differently than the the
+#	default neighbor type specified on the 'cache_peer' line.
+#	Normally it should only be necessary to list domains which
+#	should be treated differently because the default neighbor type
+#	applies for hostnames which do not match domains listed here.
+#
+#EXAMPLE:
+#	cache_peer  parent cache.foo.org 3128 3130
+#	neighbor_type_domain cache.foo.org sibling .com .net
+#	neighbor_type_domain cache.foo.org sibling .au .de
+#
+#Default:
+# none
+
+#  TAG: icp_query_timeout	(msec)
+#	Normally Squid will automatically determine an optimal ICP
+#	query timeout value based on the round-trip-time of recent ICP
+#	queries.  If you want to override the value determined by
+#	Squid, set this 'icp_query_timeout' to a non-zero value.  This
+#	value is specified in MILLISECONDS, so, to use a 2-second
+#	timeout (the old default), you would write:
+#
+#		icp_query_timeout 2000
+#
+#Default:
+# icp_query_timeout 0
+
+#  TAG: maximum_icp_query_timeout	(msec)
+#	Normally the ICP query timeout is determined dynamically.  But
+#	sometimes it can lead to very large values (say 5 seconds).
+#	Use this option to put an upper limit on the dynamic timeout
+#	value.  Do NOT use this option to always use a fixed (instead
+#	of a dynamic) timeout value. To set a fixed timeout see the
+#	'icp_query_timeout' directive.
+#
+#Default:
+# maximum_icp_query_timeout 2000
+
+#  TAG: mcast_icp_query_timeout	(msec)
+#	For Multicast peers, Squid regularly sends out ICP "probes" to
+#	count how many other peers are listening on the given multicast
+#	address.  This value specifies how long Squid should wait to
+#	count all the replies.  The default is 2000 msec, or 2
+#	seconds.
+#
+#Default:
+# mcast_icp_query_timeout 2000
+
+#  TAG: dead_peer_timeout	(seconds)
+#	This controls how long Squid waits to declare a peer cache
+#	as "dead."  If there are no ICP replies received in this
+#	amount of time, Squid will declare the peer dead and not
+#	expect to receive any further ICP replies.  However, it
+#	continues to send ICP queries, and will mark the peer as
+#	alive upon receipt of the first subsequent ICP reply.
+#
+#	This timeout also affects when Squid expects to receive ICP
+#	replies from peers.  If more than 'dead_peer' seconds have
+#	passed since the last ICP reply was received, Squid will not
+#	expect to receive an ICP reply on the next query.  Thus, if
+#	your time between requests is greater than this timeout, you
+#	will see a lot of requests sent DIRECT to origin servers
+#	instead of to your parents.
+#
+#Default:
+# dead_peer_timeout 10 seconds
+
+#  TAG: hierarchy_stoplist
+#	A list of words which, if found in a URL, cause the object to
+#	be handled directly by this cache.  In other words, use this
+#	to not query neighbor caches for certain objects.  You may
+#	list this option multiple times.
+#
+#We recommend you to use at least the following line.
+hierarchy_stoplist cgi-bin ?
+
+#  TAG: no_cache
+#	A list of ACL elements which, if matched, cause the reply to
+#	immediately removed from the cache.  In other words, use this
+#	to force certain objects to never be cached.
+#
+#	You must use the word 'DENY' to indicate the ACL names which should
+#	NOT be cached.
+#
+#We recommend you to use the following two lines.
+acl QUERY urlpath_regex cgi-bin \?
+no_cache deny QUERY
+
+
+# OPTIONS WHICH AFFECT THE CACHE SIZE
+# -----------------------------------------------------------------------------
+
+#  TAG: cache_mem	(bytes)
+#	NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS
+#	SIZE.  IT PLACES A LIMIT ON ONE ASPECT OF SQUID'S MEMORY
+#	USAGE.  SQUID USES MEMORY FOR OTHER THINGS AS WELL.
+#	YOUR PROCESS WILL PROBABLY BECOME TWICE OR THREE TIMES
+#	BIGGER THAN THE VALUE YOU PUT HERE 
+#
+#	'cache_mem' specifies the ideal amount of memory to be used
+#	for:
+#		* In-Transit objects
+#		* Hot Objects
+#		* Negative-Cached objects
+#
+#	Data for these objects are stored in 4 KB blocks.  This
+#	parameter specifies the ideal upper limit on the total size of
+#	4 KB blocks allocated.  In-Transit objects take the highest
+#	priority.
+#
+#	In-transit objects have priority over the others.  When
+#	additional space is needed for incoming data, negative-cached
+#	and hot objects will be released.  In other words, the
+#	negative-cached and hot objects will fill up any unused space
+#	not needed for in-transit objects.
+#
+#	If circumstances require, this limit will be exceeded.
+#	Specifically, if your incoming request rate requires more than
+#	'cache_mem' of memory to hold in-transit objects, Squid will
+#	exceed this limit to satisfy the new requests.  When the load
+#	decreases, blocks will be freed until the high-water mark is
+#	reached.  Thereafter, blocks will be used to store hot
+#	objects.
+#
+#Default:
+# cache_mem 8 MB
+
+#  TAG: cache_swap_low	(percent, 0-100)
+#  TAG: cache_swap_high	(percent, 0-100)
+#
+#	The low- and high-water marks for cache object replacement.
+#	Replacement begins when the swap (disk) usage is above the
+#	low-water mark and attempts to maintain utilization near the
+#	low-water mark.  As swap utilization gets close to high-water
+#	mark object eviction becomes more aggressive.  If utilization is
+#	close to the low-water mark less replacement is done each time.
+#	
+#	Defaults are 90% and 95%. If you have a large cache, 5% could be
+#	hundreds of MB. If this is the case you may wish to set these
+#	numbers closer together.
+#
+#Default:
+# cache_swap_low 90
+# cache_swap_high 95
+
+#  TAG: maximum_object_size	(bytes)
+#	Objects larger than this size will NOT be saved on disk.  The
+#	value is specified in kilobytes, and the default is 4MB.  If
+#	you wish to get a high BYTES hit ratio, you should probably
+#	increase this (one 32 MB object hit counts for 3200 10KB
+#	hits).  If you wish to increase speed more than your want to
+#	save bandwidth you should leave this low.
+#
+#	NOTE: if using the LFUDA replacement policy you should increase
+#	this value to maximize the byte hit rate improvement of LFUDA!
+#	See replacement_policy below for a discussion of this policy.
+#
+#Default:
+# maximum_object_size 4096 KB
+
+#  TAG: minimum_object_size	(bytes)
+#	Objects smaller than this size will NOT be saved on disk.  The
+#	value is specified in kilobytes, and the default is 0 KB, which
+#	means there is no minimum.
+#
+#Default:
+# minimum_object_size 0 KB
+
+#  TAG: maximum_object_size_in_memory	(bytes)
+#        Objects greater than this size will not be attempted to kept in
+#        the memory cache. This should be set high enough to keep objects
+#        accessed frequently in memory to improve performance whilst low
+#        enough to keep larger objects from hoarding cache_mem .
+#
+#Default:
+# maximum_object_size_in_memory 8 KB
+
+#  TAG: ipcache_size	(number of entries)
+#  TAG: ipcache_low	(percent)
+#  TAG: ipcache_high	(percent)
+#	The size, low-, and high-water marks for the IP cache.
+#
+#Default:
+# ipcache_size 1024
+# ipcache_low 90
+# ipcache_high 95
+
+#  TAG: fqdncache_size	(number of entries)
+#	Maximum number of FQDN cache entries.
+#
+#Default:
+# fqdncache_size 1024
+
+#  TAG: cache_replacement_policy
+#	The cache replacement policy parameter determines which
+#	objects are evicted (replaced) when disk space is needed.
+#
+#	    lru       : Squid's original list based LRU policy
+#	    heap GDSF : Greedy-Dual Size Frequency
+#	    heap LFUDA: Least Frequently Used with Dynamic Aging
+#	    heap LRU  : LRU policy implemented using a heap
+#
+#	Applies to any cache_dir lines listed below this.
+#
+#	The LRU policies keeps recently referenced objects.
+#
+#	The heap GDSF policy optimizes object hit rate by keeping smaller
+#	popular objects in cache so it has a better chance of getting a
+#	hit.  It achieves a lower byte hit rate than LFUDA though since
+#	it evicts larger (possibly popular) objects.
+#
+#	The heap LFUDA policy keeps popular objects in cache regardless of
+#	their size and thus optimizes byte hit rate at the expense of
+#	hit rate since one large, popular object will prevent many
+#	smaller, slightly less popular objects from being cached.
+#
+#	Both policies utilize a dynamic aging mechanism that prevents
+#	cache pollution that can otherwise occur with frequency-based
+#	replacement policies.
+#
+#	NOTE: if using the LFUDA replacement policy you should increase
+#	the value of maximum_object_size above its default of 4096 KB to
+#	to maximize the potential byte hit rate improvement of LFUDA.  
+#
+#	For more information about the GDSF and LFUDA cache replacement
+#	policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
+#	and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
+#
+#Default:
+# cache_replacement_policy lru
+
+#  TAG: memory_replacement_policy
+#	The memory replacement policy parameter determines which
+#	objects are purged from memory when memory space is needed.
+#
+#	See cache_replacement_policy for details.
+#
+#Default:
+# memory_replacement_policy lru
+
+
+# LOGFILE PATHNAMES AND CACHE DIRECTORIES
+# -----------------------------------------------------------------------------
+
+#  TAG: cache_dir
+#	Usage:
+#	
+#	cache_dir Type Directory-Name Fs-specific-data [options]
+#
+#	You can specify multiple cache_dir lines to spread the
+#	cache among different disk partitions.
+#
+#	Type specifies the kind of storage system to use.  Most
+#	everyone will want to use "ufs" as the type.  If you are using
+#	Async I/O (--enable async-io) on Linux or Solaris, then you may
+#	want to try "aufs" as the type.  Async IO support may be
+#	buggy, however, so beware.
+#
+#	'Directory' is a top-level directory where cache swap
+#	files will be stored.  If you want to use an entire disk
+#	for caching, then this can be the mount-point directory.
+#	The directory must exist and be writable by the Squid
+#	process.  Squid will NOT create this directory for you.
+#
+#	The ufs store type:
+#
+#	"ufs" is the old well-known Squid storage format that has always
+#	been there.
+#
+#	cache_dir ufs Directory-Name Mbytes L1 L2 [options]
+#
+#	'Mbytes' is the amount of disk space (MB) to use under this
+#	directory.  The default is 100 MB.  Change this to suit your
+#	configuration.
+#
+#	'Level-1' is the number of first-level subdirectories which
+#	will be created under the 'Directory'.  The default is 16.
+#
+#	'Level-2' is the number of second-level subdirectories which
+#	will be created under each first-level directory.  The default
+#	is 256.
+#
+#	The aufs store type:
+#
+#	"aufs" uses the same storage format as "ufs", utilizing
+#	POSIX-threads to avoid blocking the main Squid process on
+#	disk-I/O. This was formerly known in Squid as async-io.
+#
+#	cache_dir aufs Directory-Name Mbytes L1 L2 [options]
+#
+#	see argument descriptions under ufs above
+#
+#	The diskd store type:
+#
+#	"diskd" uses the same storage format as "ufs", utilizing a
+#	separate process to avoid blocking the main Squid process on
+#	disk-I/O.
+#
+#	cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
+#
+#	see argument descriptions under ufs above
+#
+#	Q1 specifies the number of unacknowledged I/O requests when Squid
+#	stops opening new files. If this many messages are in the queues,
+#	Squid won't open new files. Default is 64
+#
+#	Q2 specifies the number of unacknowledged messages when Squid
+#	starts blocking.  If this many messages are in the queues,
+#	Squid blocks until it recevies some replies. Default is 72
+#
+#	Common options:
+#
+#	read-only, this cache_dir is read only.
+#
+#	max-size=n, refers to the max object size this storedir supports.
+#	It is used to initially choose the storedir to dump the object.
+#	Note: To make optimal use of the max-size limits you should order
+#	the cache_dir lines with the smallest max-size value first and the
+#	ones with no max-size specification last.
+#
+#Default:
+# cache_dir ufs /var/spool/squid 100 16 256
+
+#  TAG: cache_access_log
+#	Logs the client request activity.  Contains an entry for
+#	every HTTP and ICP queries received.
+#
+#Default:
+# cache_access_log /var/log/squid/access.log
+
+#  TAG: cache_log
+#	Cache logging file. This is where general information about
+#	your cache's behavior goes. You can increase the amount of data
+#	logged to this file with the "debug_options" tag below.
+#
+#Default:
+# cache_log /var/log/squid/cache.log
+
+#  TAG: cache_store_log
+#	Logs the activities of the storage manager.  Shows which
+#	objects are ejected from the cache, and which objects are
+#	saved and for how long.  To disable, enter "none". There are
+#	not really utilities to analyze this data, so you can safely
+#	disable it.
+#
+#Default:
+# cache_store_log /var/log/squid/store.log
+
+#  TAG: cache_swap_log
+#	Location for the cache "swap.log."  This log file holds the
+#	metadata of objects saved on disk.  It is used to rebuild the
+#	cache during startup.  Normally this file resides in each
+#	'cache_dir' directory, but you may specify an alternate
+#	pathname here.  Note you must give a full filename, not just
+#	a directory. Since this is the index for the whole object
+#	list you CANNOT periodically rotate it!
+#
+#	If %s can be used in the file name then it will be replaced with a
+#	a representation of the cache_dir name where each / is replaced
+#	with '.'. This is needed to allow adding/removing cache_dir
+#	lines when cache_swap_log is being used.
+#	    
+#	If have more than one 'cache_dir', and %s is not used in the name
+#	then these swap logs will have names such as:
+#
+#		cache_swap_log.00
+#		cache_swap_log.01
+#		cache_swap_log.02
+#
+#	The numbered extension (which is added automatically)
+#	corresponds to the order of the 'cache_dir' lines in this
+#	configuration file.  If you change the order of the 'cache_dir'
+#	lines in this file, then these log files will NOT correspond to
+#	the correct 'cache_dir' entry (unless you manually rename
+#	them).  We recommend that you do NOT use this option.  It is
+#	better to keep these log files in each 'cache_dir' directory.
+#
+#Default:
+# none
+
+#  TAG: emulate_httpd_log	on|off
+#	The Cache can emulate the log file format which many 'httpd'
+#	programs use.  To disable/enable this emulation, set
+#	emulate_httpd_log to 'off' or 'on'.  The default
+#	is to use the native log format since it includes useful
+#	information that Squid-specific log analyzers use.
+#
+#Default:
+# emulate_httpd_log off
+
+#  TAG: log_ip_on_direct	on|off
+#	Log the destination IP address in the hierarchy log tag when going
+#	direct. Earlier Squid versions logged the hostname here. If you
+#	prefer the old way set this to off.
+#
+#Default:
+# log_ip_on_direct on
+
+#  TAG: mime_table
+#	Pathname to Squid's MIME table. You shouldn't need to change
+#	this, but the default file contains examples and formatting
+#	information if you do.
+#
+#Default:
+# mime_table /etc/squid/mime.conf
+
+#  TAG: log_mime_hdrs	on|off
+#	The Cache can record both the request and the response MIME
+#	headers for each HTTP transaction.  The headers are encoded
+#	safely and will appear as two bracketed fields at the end of
+#	the access log (for either the native or httpd-emulated log
+#	formats).  To enable this logging set log_mime_hdrs to 'on'.
+#
+#Default:
+# log_mime_hdrs off
+
+#  TAG: useragent_log
+#	Squid will write the User-Agent field from HTTP requests
+#	to the filename specified here.  By default useragent_log
+#	is disabled.
+#
+#Default:
+# none
+
+#  TAG: referer_log
+# Note: This option is only available if Squid is rebuilt with the
+#       --enable-referer-log option
+#
+#	Squid will write the Referer field from HTTP requests to the
+#	filename specified here.  By default referer_log is disabled.
+#
+#Default:
+# none
+
+#  TAG: pid_filename
+#	A filename to write the process-id to.  To disable, enter "none".
+#
+#Default:
+# pid_filename /var/run/squid.pid
+
+#  TAG: debug_options
+#	Logging options are set as section,level where each source file
+#	is assigned a unique section.  Lower levels result in less
+#	output,  Full debugging (level 9) can result in a very large
+#	log file, so be careful.  The magic word "ALL" sets debugging
+#	levels for all sections.  We recommend normally running with
+#	"ALL,1".
+#
+#Default:
+# debug_options ALL,1
+
+#  TAG: log_fqdn	on|off
+#	Turn this on if you wish to log fully qualified domain names
+#	in the access.log. To do this Squid does a DNS lookup of all
+#	IP's connecting to it. This can (in some situations) increase
+#	latency, which makes your cache seem slower for interactive
+#	browsing. 
+#
+#Default:
+# log_fqdn off
+
+#  TAG: client_netmask
+#	A netmask for client addresses in logfiles and cachemgr output.
+#	Change this to protect the privacy of your cache clients.
+#	A netmask of 255.255.255.0 will log all IP's in that range with
+#	the last digit set to '0'.
+#
+#Default:
+# client_netmask 255.255.255.255
+
+
+# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
+# -----------------------------------------------------------------------------
+
+#  TAG: ftp_user
+#	If you want the anonymous login password to be more informative
+#	(and enable the use of picky ftp servers), set this to something
+#	reasonable for your domain, like wwwuser@somewhere.net
+#
+#	The reason why this is domainless by default is that the
+#	request can be made on the behalf of a user in any domain,
+#	depending on how the cache is used.
+#	Some ftp server also validate that the email address is valid
+#	(for example perl.com).
+#
+#Default:
+# ftp_user Squid@
+
+#  TAG: ftp_list_width
+#	Sets the width of ftp listings. This should be set to fit in
+#	the width of a standard browser. Setting this too small
+#	can cut off long filenames when browsing ftp sites.
+#
+#Default:
+# ftp_list_width 32
+
+#  TAG: ftp_passive
+#	If your firewall does not allow Squid to use passive
+#	connections, then turn off this option.
+#
+#Default:
+# ftp_passive on
+
+#  TAG: cache_dns_program
+# Note: This option is only available if Squid is rebuilt with the
+#       --disable-internal-dns option
+#
+#	Specify the location of the executable for dnslookup process.
+#
+#Default:
+# cache_dns_program /usr/lib/squid/
+
+#  TAG: dns_children
+# Note: This option is only available if Squid is rebuilt with the
+#       --disable-internal-dns option
+#
+#	The number of processes spawn to service DNS name lookups.
+#	For heavily loaded caches on large servers, you should
+#	probably increase this value to at least 10.  The maximum
+#	is 32.  The default is 5.
+#
+#	You must have at least one dnsserver process.
+#
+#Default:
+# dns_children 5
+
+#  TAG: dns_retransmit_interval
+#	Initial retransmit interval for DNS queries. The interval is
+#	doubled each time all configured DNS servers have been tried.
+#
+#
+#Default:
+# dns_retransmit_interval 5 seconds
+
+#  TAG: dns_timeout
+#	DNS Query timeout. If no response is received to a DNS query
+#	within this time then all DNS servers for the queried domain
+#	is assumed to be unavailable.
+#
+#Default:
+# dns_timeout 5 minutes
+
+#  TAG: dns_defnames	on|off
+# Note: This option is only available if Squid is rebuilt with the
+#       --disable-internal-dns option
+#
+#	Normally the 'dnsserver' disables the RES_DEFNAMES resolver
+#	option (see res_init(3)).  This prevents caches in a hierarchy
+#	from interpreting single-component hostnames locally.  To allow
+#	dnsserver to handle single-component names, enable this
+#	option.
+#
+#Default:
+# dns_defnames off
+
+#  TAG: dns_nameservers
+#	Use this if you want to specify a list of DNS name servers
+#	(IP addresses) to use instead of those given in your
+#	/etc/resolv.conf file.
+#
+#	Example: dns_nameservers 10.0.0.1 192.172.0.4
+#
+#Default:
+# none
+
+#  TAG: diskd_program
+#	Specify the location of the diskd executable.
+#	Note that this is only useful if you have compiled in
+#	diskd as one of the store io modules.
+#
+#Default:
+# diskd_program /usr/lib/squid/diskd
+
+#  TAG: unlinkd_program
+#	Specify the location of the executable for file deletion process.
+#
+#Default:
+# unlinkd_program /usr/lib/squid/unlinkd
+
+#  TAG: pinger_program
+# Note: This option is only available if Squid is rebuilt with the
+#       --enable-icmp option
+#
+#	Specify the location of the executable for the pinger process.
+#	This is only useful if you configured Squid (during compilation)
+#	with the '--enable-icmp' option.
+#
+#Default:
+# pinger_program /usr/lib/squid/
+
+#  TAG: redirect_program
+#	Specify the location of the executable for the URL redirector.
+#	Since they can perform almost any function there isn't one included.
+#	See the Release-Notes for information on how to write one.
+#	By default, a redirector is not used.
+#
+#Default:
+# none
+
+#  TAG: redirect_children
+#	The number of redirector processes to spawn. If you start
+#	too few Squid will have to wait for them to process a backlog of
+#	URLs, slowing it down. If you start too many they will use RAM
+#	and other system resources.
+#
+#Default:
+# redirect_children 5
+
+#  TAG: redirect_rewrites_host_header
+#	By default Squid rewrites any Host: header in redirected
+#	requests.  If you are running a accelerator then this may
+#	not be a wanted effect of a redirector.
+#
+#Default:
+# redirect_rewrites_host_header on
+
+#  TAG: redirector_access
+#	If defined, this access list specifies which requests are
+#	sent to the redirector processes.  By default all requests
+#	are sent.
+#
+#Default:
+# none
+
+#  TAG: authenticate_program
+#	Specify the command for the external authenticator.  Such a
+#	program reads a line containing "username password" and replies
+#	"OK" or "ERR" in an endless loop.  If you use an authenticator,
+#	make sure you have 1 acl of type proxy_auth.  By default, the
+#	authenticator_program is not used.
+#
+#	If you want to use the traditional proxy authentication,
+#	jump over to the ../auth_modules/NCSA directory and
+#	type:
+#		% make
+#		% make install
+#
+#	Then, set this line to something like
+#
+#	authenticate_program /usr/bin/ncsa_auth /usr/etc/passwd
+#
+#Default:
+# none
+
+#  TAG: authenticate_children
+#	The number of authenticator processes to spawn (default 5). If you
+#	start too few Squid will have to wait for them to process a backlog
+#	of usercode/password verifications, slowing it down. When password
+#	verifications are done via a (slow) network you are likely to need
+#	lots of authenticator processes.
+#
+#Default:
+# authenticate_children 5
+
+#  TAG: authenticate_ttl
+#	The time a checked username/password combination remains cached.
+#	If a wrong password is given for a cached user, the user gets
+#	removed from the username/password cache forcing a revalidation.
+#
+#Default:
+# authenticate_ttl 1 hour
+
+#  TAG: authenticate_ip_ttl
+#	With this option you control how long a proxy authentication
+#	will be bound to a specific IP address. If a request using
+#	the same user name is received during this time then access
+#	will be denied and both users are required to reauthenticate
+#	them selves.  The idea behind this is to make it annoying
+#	for people to share their password to their friends, but
+#	yet allow a dialup user to reconnect on a different dialup
+#	port.
+#
+#	The default is 0 to disable the check. Recommended value
+#	if you have dialup users are no more than 60 seconds to allow
+#	the user to redial without hassle. If all your users are
+#	stationary then higher values may be used.
+#
+#	See also authenticate_ip_ttl_is_strict
+#
+#Default:
+# authenticate_ip_ttl 0 seconds
+
+#  TAG: authenticate_ip_ttl_is_strict
+#	This option makes authenticate_ip_ttl a bit stricted. With this
+#	enabled authenticate_ip_ttl will deny all access from other IP
+#	addresses until the TTL has expired, and the IP address "owning"
+#	the userid will not be forced to reauthenticate.
+#
+#Default:
+# authenticate_ip_ttl_is_strict on
+
+
+# OPTIONS FOR TUNING THE CACHE
+# -----------------------------------------------------------------------------
+
+#  TAG: wais_relay_host
+#  TAG: wais_relay_port
+#	Relay WAIS request to host (1st arg) at port (2 arg).
+#
+#Default:
+# wais_relay_port 0
+
+#  TAG: request_header_max_size	(KB)
+#	This specifies the maximum size for HTTP headers in a request.
+#	Request headers are usually relatively small (about 512 bytes).
+#	Placing a limit on the request header size will catch certain
+#	bugs (for example with persistent connections) and possibly
+#	buffer-overflow or denial-of-service attacks.
+#
+#Default:
+# request_header_max_size 10 KB
+
+#  TAG: request_body_max_size	(KB)
+#	This specifies the maximum size for an HTTP request body.
+#	In other words, the maximum size of a PUT/POST request.
+#	A user who attempts to send a request with a body larger
+#	than this limit receives an "Invalid Request" error message.
+#	If you set this parameter to a zero, there will be no limit
+#	imposed.
+#
+#Default:
+# request_body_max_size 1 MB
+
+#  TAG: reply_body_max_size	(KB)
+#	This option specifies the maximum size of a reply body.  It
+#	can be used to prevent users from downloading very large files,
+#	such as MP3's and movies.   The reply size is checked twice.
+#	First when we get the reply headers, we check the
+#	content-length value.  If the content length value exists and
+#	is larger than this parameter, the request is denied and the
+#	user receives an error message that says "the request or reply
+#	is too large." If there is no content-length, and the reply
+#	size exceeds this limit, the client's connection is just closed
+#	and they will receive a partial reply.
+#
+#	NOTE: downstream caches probably can not detect a partial reply
+#	if there is no content-length header, so they will cache
+#	partial responses and give them out as hits.  You should NOT
+#	use this option if you have downstream caches.
+#
+#	If you set this parameter to zero (the default), there will be
+#	no limit imposed.
+#
+#Default:
+# reply_body_max_size 0
+
+#  TAG: refresh_pattern
+#	usage: refresh_pattern [-i] regex min percent max [options]
+#
+#	By default, regular expressions are CASE-SENSITIVE.  To make
+#	them case-insensitive, use the -i option.
+#
+#	'Min' is the time (in minutes) an object without an explicit
+#	expiry time should be considered fresh. The recommended
+#	value is 0, any higher values may cause dynamic applications
+#	to be erroneously cached unless the application designer
+#	has taken the appropriate actions.
+#
+#	'Percent' is a percentage of the objects age (time since last
+#	modification age) an object without explicit expiry time
+#	will be considered fresh.
+#
+#	'Max' is an upper limit on how long objects without an explicit
+#	expiry time will be considered fresh.
+#
+#	options: overrsde-expire
+#		 override-lastmod
+#		 reload-into-ims
+#		 ignore-reload
+#
+#		override-expire enforces min age even if the server
+#		sent a Expires: header. Doing this VIOLATES the HTTP
+#		standard.  Enabling this feature could make you liable
+#		for problems which it causes.
+#
+#		override-lastmod enforces min age even on objects
+#		that was modified recently.
+#
+#		reload-into-ims changes client no-cache or ``reload''
+#		to If-Modified-Since requests. Doing this VIOLATES the
+#		HTTP standard. Enabling this feature could make you
+#		liable for problems which it causes.
+#
+#		ignore-reload ignores a client no-cache or ``reload''
+#		header. Doing this VIOLATES the HTTP standard. Enabling
+#		this feature could make you liable for problems which
+#		it causes.
+#		
+#	Please see the file doc/Release-Notes-1.1.txt for a full
+#	description of Squid's refresh algorithm.  Basically a
+#	cached object is: (the order is changed from 1.1.X)
+#
+#		FRESH if expires < now, else STALE
+#		STALE if age > max
+#		FRESH if lm-factor < percent, else STALE
+#		FRESH if age < min
+#		else STALE
+#
+#	The refresh_pattern lines are checked in the order listed here.
+#	The first entry which matches is used.  If none of the entries
+#	match, then the default will be used.
+#
+#	Note, you must uncomment all the default lines if you want
+#	to change one. The default setting is only active if none is
+#	used.
+#
+#Default:
+# refresh_pattern ^ftp:		1440	20%	10080
+# refresh_pattern ^gopher:	1440	0%	1440
+# refresh_pattern .		0	20%	4320
+
+#  TAG: reference_age
+#	As a part of normal operation, Squid performs Least Recently
+#	Used removal of cached objects.  The LRU age for removal is
+#	computed dynamically, based on the amount of disk space in
+#	use.  The dynamic value can be seen in the Cache Manager 'info'
+#	output.
+#
+#	The 'reference_age' parameter defines the maximum LRU age.  For
+#	example, setting reference_age to '1 week' will cause objects
+#	to be removed if they have not been accessed for a week or
+#	more.  The default value is one year.
+#
+#	Specify a number here, followed by units of time.  For example:
+#		1 week
+#		3.5 days
+#		4 months
+#		2.2 hours
+#
+#	NOTE: this parameter is not used when using the enhanced
+#	replacement policies, GDSH or LFUDA.
+#
+#Default:
+# reference_age 1 year
+
+#  TAG: quick_abort_min	(KB)
+#  TAG: quick_abort_max	(KB)
+#  TAG: quick_abort_pct	(percent)
+#	The cache can be configured to continue downloading aborted
+#	requests.  This may be undesirable on slow (e.g. SLIP) links
+#	and/or very busy caches.  Impatient users may tie up file
+#	descriptors and bandwidth by repeatedly requesting and
+#	immediately aborting downloads.
+#
+#	When the user aborts a request, Squid will check the
+#	quick_abort values to the amount of data transfered until
+#	then.
+#
+#	If the transfer has less than 'quick_abort_min' KB remaining,
+#	it will finish the retrieval.  Setting 'quick_abort_min' to -1
+#	will disable the quick_abort feature.
+#
+#	If the transfer has more than 'quick_abort_max' KB remaining,
+#	it will abort the retrieval.
+#
+#	If more than 'quick_abort_pct' of the transfer has completed,
+#	it will finish the retrieval.
+#
+#Default:
+# quick_abort_min 16 KB
+# quick_abort_max 16 KB
+# quick_abort_pct 95
+
+#  TAG: negative_ttl	time-units
+#	Time-to-Live (TTL) for failed requests.  Certain types of
+#	failures (such as "connection refused" and "404 Not Found") are
+#	negatively-cached for a configurable amount of time.  The
+#	default is 5 minutes.  Note that this is different from
+#	negative caching of DNS lookups.
+#
+#Default:
+# negative_ttl 5 minutes
+
+#  TAG: positive_dns_ttl	time-units
+#	Time-to-Live (TTL) for positive caching of successful DNS lookups.
+#	Default is 6 hours (360 minutes).  If you want to minimize the
+#	use of Squid's ipcache, set this to 1, not 0.
+#
+#Default:
+# positive_dns_ttl 6 hours
+
+#  TAG: negative_dns_ttl	time-units
+#	Time-to-Live (TTL) for negative caching of failed DNS lookups.
+#
+#Default:
+# negative_dns_ttl 5 minutes
+
+#  TAG: range_offset_limit	(bytes)
+#	Sets a upper limit on how far into the the file a Range request
+#	may be to cause Squid to prefetch the whole file. If beyond this
+#	limit then Squid forwards the Range request as it is and the result
+#	is NOT cached.
+#
+#	This is to stop a far ahead range request (lets say start at 17MB)
+#	from making Squid fetch the whole object up to that point before
+#	sending anything to the client.
+#
+#	A value of -1 causes Squid to always fetch the object from the
+#	beginning so that it may cache the result. (2.0 style)
+#
+#	A value of 0 causes Squid to never fetch more than the
+#	client requested. (default)
+#
+#Default:
+# range_offset_limit 0 KB
+
+
+# TIMEOUTS
+# -----------------------------------------------------------------------------
+
+#  TAG: connect_timeout	time-units
+#	Some systems (notably Linux) can not be relied upon to properly
+#	time out connect(2) requests.  Therefore the Squid process
+#	enforces its own timeout on server connections.  This parameter
+#	specifies how long to wait for the connect to complete.  The
+#	default is two minutes (120 seconds).
+#
+#Default:
+# connect_timeout 2 minutes
+
+#  TAG: peer_connect_timeout	time-units
+#	This parameter specifies how long to wait for a pending TCP
+#	connection to a peer cache.  The default is 30 seconds.   You
+#	may also set different timeout values for individual neighbors
+#	with the 'connect-timeout' option on a 'cache_peer' line.
+#
+#Default:
+# peer_connect_timeout 30 seconds
+
+#  TAG: siteselect_timeout	time-units
+#	For URN to multiple URL's URL selection
+#
+#Default:
+# siteselect_timeout 4 seconds
+
+#  TAG: read_timeout	time-units
+#	The read_timeout is applied on server-side connections.  After
+#	each successful read(), the timeout will be extended by this
+#	amount.  If no data is read again after this amount of time,
+#	the request is aborted and logged with ERR_READ_TIMEOUT.  The
+#	default is 15 minutes.
+#
+#Default:
+# read_timeout 15 minutes
+
+#  TAG: request_timeout
+#	How long to wait for an HTTP request after connection
+#	establishment.  For persistent connections, wait this long
+#	after the previous request completes.
+#
+#Default:
+# request_timeout 30 seconds
+
+#  TAG: client_lifetime	time-units
+#	The maximum amount of time that a client (browser) is allowed to
+#	remain connected to the cache process.  This protects the Cache
+#	from having a lot of sockets (and hence file descriptors) tied up
+#	in a CLOSE_WAIT state from remote clients that go away without
+#	properly shutting down (either because of a network failure or
+#	because of a poor client implementation).  The default is one
+#	day, 1440 minutes.
+#
+#	NOTE:  The default value is intended to be much larger than any
+#	client would ever need to be connected to your cache.  You
+#	should probably change client_lifetime only as a last resort.
+#	If you seem to have many client connections tying up
+#	filedescriptors, we recommend first tuning the read_timeout,
+#	request_timeout, pconn_timeout and quick_abort values.
+#
+#Default:
+# client_lifetime 1 day
+
+#  TAG: half_closed_clients
+#	Some clients may shutdown the sending side of their TCP
+#	connections, while leaving their receiving sides open.	Sometimes,
+#	Squid can not tell the difference between a half-closed and a
+#	fully-closed TCP connection.  By default, half-closed client
+#	connections are kept open until a read(2) or write(2) on the
+#	socket returns an error.  Change this option to 'off' and Squid
+#	will immediately close client connections when read(2) returns
+#	"no more data to read."
+#
+#Default:
+# half_closed_clients on
+
+#  TAG: pconn_timeout
+#	Timeout for idle persistent connections to servers and other
+#	proxies.
+#
+#Default:
+# pconn_timeout 120 seconds
+
+#  TAG: ident_timeout
+#	Maximum time to wait for IDENT requests.  If this is too high,
+#	and you enabled 'ident_lookup', then you might be susceptible
+#	to denial-of-service by having many ident requests going at
+#	once.
+#
+#	Only src type ACL checks are fully supported.  A src_domain
+#	ACL might work at times, but it will not always provide
+#	the correct result.
+#
+#	This option may be disabled by using --disable-ident with
+#	the configure script.
+#
+#Default:
+# ident_timeout 10 seconds
+
+#  TAG: shutdown_lifetime	time-units
+#	When SIGTERM or SIGHUP is received, the cache is put into
+#	"shutdown pending" mode until all active sockets are closed.
+#	This value is the lifetime to set for all open descriptors
+#	during shutdown mode.  Any active clients after this many
+#	seconds will receive a 'timeout' message.
+#
+#Default:
+# shutdown_lifetime 30 seconds
+
+
+# ACCESS CONTROLS
+# -----------------------------------------------------------------------------
+
+#  TAG: acl
+#	Defining an Access List
+#
+#	acl aclname acltype string1 ...
+#	acl aclname acltype "file" ...
+#
+#	when using "file", the file should contain one item per line
+#
+#	acltype is one of src dst srcdomain dstdomain url_pattern
+#		urlpath_pattern time port proto method browser user
+#
+#	By default, regular expressions are CASE-SENSITIVE.  To make
+#	them case-insensitive, use the -i option.
+#
+#	acl aclname src      ip-address/netmask ... (clients IP address)
+#	acl aclname src      addr1-addr2/netmask ... (range of addresses)
+#	acl aclname dst      ip-address/netmask ... (URL host's IP address)
+#	acl aclname myip     ip-address/netmask ... (local socket IP address)
+#
+#	acl aclname srcdomain   .foo.com ...    # reverse lookup, client IP
+#	acl aclname dstdomain   .foo.com ...    # Destination server from URL
+#	acl aclname srcdom_regex [-i] xxx ...   # regex matching client name
+#	acl aclname dstdom_regex [-i] xxx ...   # regex matching server
+#	  # For dstdomain and dstdom_regex  a reverse lookup is tried if a IP
+#	  # based URL is used. The name "none" is used if the reverse lookup
+#	  # fails.
+#
+#	acl aclname time     [day-abbrevs]  [h1:m1-h2:m2]
+#	    day-abbrevs:
+#		S - Sunday
+#		M - Monday
+#		T - Tuesday
+#		W - Wednesday
+#		H - Thursday
+#		F - Friday
+#		A - Saturday
+#	    h1:m1 must be less than h2:m2
+#	acl aclname url_regex [-i] ^http:// ...	# regex matching on whole URL
+#	acl aclname urlpath_regex [-i] \.gif$ ...	# regex matching on URL path
+#	acl aclname port     80 70 21 ...
+#	acl aclname port     0-1024 ...		# ranges allowed
+#	acl aclname myport   3128 ...		# (local socket TCP port)
+#	acl aclname proto    HTTP FTP ...
+#	acl aclname method   GET POST ...
+#	acl aclname browser  [-i] regexp
+#	  # pattern match on User-Agent header
+#	acl aclname ident    username ...
+#	acl aclname ident_regex [-i] pattern ...
+#	  # string match on ident output.
+#	  # use REQUIRED to accept any non-null ident.
+#	acl aclname src_as   number ... 
+#	acl aclname dst_as   number ...
+#	  # Except for access control, AS numbers can be used for
+#	  # routing of requests to specific caches. Here's an 
+#	  # example for routing all requests for AS#1241 and only 
+#	  # those to mycache.mydomain.net:
+#	  # acl asexample dst_as 1241
+#	  # cache_peer_access mycache.mydomain.net allow asexample
+#	  # cache_peer_access mycache_mydomain.net deny all
+#
+#	acl aclname proxy_auth username ...
+#	acl aclname proxy_auth_regex [-i] pattern ...
+#	  # list of valid usernames
+#	  # use REQUIRED to accept any valid username.
+#	  #
+#	  # NOTE: when a Proxy-Authentication header is sent but it is not
+#	  # needed during ACL checking the username is NOT logged
+#	  # in access.log.
+#	  #
+#	  # NOTE: proxy_auth requires a EXTERNAL authentication program
+#	  # to check username/password combinations (see
+#	  # authenticate_program).
+#	  #
+#	  # WARNING: proxy_auth can't be used in a transparent proxy. It
+#	  # collides with any authentication done by origin servers. It may
+#	  # seem like it works at first, but it doesn't.
+#
+#	acl aclname snmp_community string ...
+#	  # A community string to limit access to your SNMP Agent
+#	  # Example:
+#	  # 
+#	  #	acl snmppublic snmp_community public
+#
+#	acl aclname maxconn number
+#	  # This will be matched when the client's IP address has
+#	  # more than <number> HTTP connections established.
+#
+#	acl req_mime_type mime-type1 ...
+#	  # regex match agains the mime type of the request generated
+#	  # by the client. Can be used to detect file upload or some
+#	  # types HTTP tunelling requests.
+#	  # NOTE: This does NOT match the reply. You cannot use this
+#	  # to match the returned file type.
+#
+#Examples:
+#acl myexample dst_as 1241
+#acl password proxy_auth REQUIRED
+#acl fileupload req_mime_type -i ^multipart/form-data$
+#
+#Recommended minimum configuration:
+acl all src 0.0.0.0/0.0.0.0
+acl manager proto cache_object
+acl localhost src 127.0.0.1/255.255.255.255
+acl SSL_ports port 443 563
+acl Safe_ports port 80		# http
+acl Safe_ports port 21		# ftp
+acl Safe_ports port 443 563	# https, snews
+acl Safe_ports port 70		# gopher
+acl Safe_ports port 210		# wais
+acl Safe_ports port 1025-65535	# unregistered ports
+acl Safe_ports port 280		# http-mgmt
+acl Safe_ports port 488		# gss-http
+acl Safe_ports port 591		# filemaker
+acl Safe_ports port 777		# multiling http
+acl CONNECT method CONNECT
+
+#  TAG: http_access
+#	Allowing or Denying access based on defined access lists
+#
+#	Access to the HTTP port:
+#	http_access allow|deny [!]aclname ...
+#
+#	NOTE on default values:
+#
+#	If there are no "access" lines present, the default is to deny
+#	the request.
+#
+#	If none of the "access" lines cause a match, the default is the
+#	opposite of the last line in the list.  If the last line was
+#	deny, then the default is allow.  Conversely, if the last line
+#	is allow, the default will be deny.  For these reasons, it is a
+#	good idea to have an "deny all" or "allow all" entry at the end
+#	of your access lists to avoid potential confusion.
+#
+#Default:
+# http_access deny all
+#
+#Recommended minimum configuration:
+#
+# Only allow cachemgr access from localhost
+http_access allow manager localhost
+http_access deny manager
+# Deny requests to unknown ports
+http_access deny !Safe_ports
+# Deny CONNECT to other than SSL ports
+http_access deny CONNECT !SSL_ports
+#
+# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
+#
+# And finally deny all other access to this proxy
+http_access allow localhost
+http_access deny all
+
+#  TAG: icp_access
+#	Allowing or Denying access to the ICP port based on defined
+#	access lists
+#
+#	icp_access  allow|deny [!]aclname ...
+#
+#	See http_access for details
+#
+#Default:
+# icp_access deny all
+#
+#Allow ICP queries from eveyone
+icp_access allow all
+
+#  TAG: miss_access
+#	Use to force your neighbors to use you as a sibling instead of
+#	a parent.  For example:
+#
+#		acl localclients src 172.16.0.0/16
+#		miss_access allow localclients
+#		miss_access deny  !localclients
+#
+#	This means that only your local clients are allowed to fetch
+#	MISSES and all other clients can only fetch HITS.
+#
+#	By default, allow all clients who passed the http_access rules
+#	to fetch MISSES from us.
+#
+#Default setting:
+# miss_access allow all
+
+#  TAG: cache_peer_access
+#	Similar to 'cache_peer_domain' but provides more flexibility by
+#	using ACL elements.
+#
+#	cache_peer_access cache-host allow|deny [!]aclname ...
+#
+#	The syntax is identical to 'http_access' and the other lists of
+#	ACL elements.  See the comments for 'http_access' below, or
+#	the Squid FAQ (http://www.squid-cache.org/FAQ/FAQ-10.html).
+#
+#Default:
+# none
+
+#  TAG: proxy_auth_realm
+#	Specifies the realm name which is to be reported to the client for
+#	proxy authentication (part of the text the user will see when
+#	prompted their username and password).
+#
+#Default:
+# proxy_auth_realm Squid proxy-caching web server
+
+#  TAG: ident_lookup_access
+#	A list of ACL elements which, if matched, cause an ident
+#	(RFC 931) lookup to be performed for this request.  For
+#	example, you might choose to always perform ident lookups
+#	for your main multi-user Unix boxes, but not for your Macs
+#	and PCs.  By default, ident lookups are not performed for
+#	any requests.
+#
+#	To enable ident lookups for specific client addresses, you
+#	can follow this example:
+# 
+#	acl ident_aware_hosts src 198.168.1.0/255.255.255.0
+#	ident_lookup_access allow ident_aware_hosts
+#	ident_lookup_access deny all
+#
+#	This option may be disabled by using --disable-ident with
+#	the configure script.
+#
+#Default:
+# ident_lookup_access deny all
+
+
+# ADMINISTRATIVE PARAMETERS
+# -----------------------------------------------------------------------------
+
+#  TAG: cache_mgr
+#	Email-address of local cache manager who will receive
+#	mail if the cache dies.  The default is "webmaster."
+#
+#Default:
+# cache_mgr root
+
+#  TAG: cache_effective_user
+#  TAG: cache_effective_group
+#
+#	If the cache is run as root, it will change its effective/real
+#	UID/GID to the UID/GID specified below.  The default is to
+#	change to UID to nobody and GID to nobody.
+#
+#	If Squid is not started as root, the default is to keep the
+#	current UID/GID.  Note that if Squid is not started as root then
+#	you cannot set http_port to a value lower than 1024.
+#
+#Default:
+# cache_effective_user nobody
+# cache_effective_group nobody
+
+#  TAG: visible_hostname
+#	If you want to present a special hostname in error messages, etc,
+#	then define this.  Otherwise, the return value of gethostname()
+#	will be used. If you have multiple caches in a cluster and
+#	get errors about IP-forwarding you must set them to have individual
+#	names with this setting.
+#
+#Default:
+# none
+
+#  TAG: unique_hostname
+#	If you want to have multiple machines with the same
+#	'visible_hostname' then you must give each machine a different
+#	'unique_hostname' so that forwarding loops can be detected.
+#
+#Default:
+# none
+
+#  TAG: hostname_aliases
+#	A list of other DNS names that your cache has.
+#
+#Default:
+# none
+
+
+# OPTIONS FOR THE CACHE REGISTRATION SERVICE
+# -----------------------------------------------------------------------------
+#
+#	This section contains parameters for the (optional) cache
+#	announcement service.  This service is provided to help
+#	cache administrators locate one another in order to join or
+#	create cache hierarchies.
+#
+#	An 'announcement' message is sent (via UDP) to the registration
+#	service by Squid.  By default, the announcement message is NOT
+#	SENT unless you enable it with 'announce_period' below.
+#
+#	The announcement message includes your hostname, plus the
+#	following information from this configuration file:
+#
+#		http_port
+#		icp_port
+#		cache_mgr
+#
+#	All current information is processed regularly and made
+#	available on the Web at http://www.ircache.net/Cache/Tracker/.
+
+#  TAG: announce_period
+#	This is how frequently to send cache announcements.  The
+#	default is `0' which disables sending the announcement
+#	messages.
+#
+#	To enable announcing your cache, just uncomment the line
+#	below.
+#
+#Default:
+# announce_period 0
+#
+#To enable announcing your cache, just uncomment the line below.
+#announce_period 1 day
+
+#  TAG: announce_host
+#  TAG: announce_file
+#  TAG: announce_port
+#	announce_host and announce_port set the hostname and port
+#	number where the registration message will be sent.
+#
+#	Hostname will default to 'tracker.ircache.net' and port will
+#	default default to 3131.  If the 'filename' argument is given,
+#	the contents of that file will be included in the announce
+#	message.
+#
+#Default:
+# announce_host tracker.ircache.net
+# announce_port 3131
+
+
+# HTTPD-ACCELERATOR OPTIONS
+# -----------------------------------------------------------------------------
+
+#  TAG: httpd_accel_host
+#  TAG: httpd_accel_port
+#	If you want to run Squid as an httpd accelerator, define the
+#	host name and port number where the real HTTP server is.
+#
+#	If you want virtual host support then specify the hostname
+#	as "virtual".
+#
+#	If you want virtual port support then specify the port as "0".
+#
+#	NOTE: enabling httpd_accel_host disables proxy-caching and
+#	ICP.  If you want these features enabled also, then set
+#	the 'httpd_accel_with_proxy' option.
+#
+#Default:
+# httpd_accel_port 80
+
+#  TAG: httpd_accel_single_host	on|off
+#	If you are running Squid as a accelerator and have a single backend
+#	server then set this to on. This causes Squid to forward the request
+#	to this server irregardles of what any redirectors or Host headers
+#	says.
+#
+#	Leave this at off if you have multiple backend servers, and use a
+#	redirector (or host table or private DNS) to map the requests to the
+#	appropriate backend servers. Note that the mapping needs to be a
+#	1-1 mapping between requested and backend (from redirector) domain
+#	names or caching will fail, as cacing is performed using the
+#	URL returned from the redirector.
+#
+#	See also redirect_rewrites_host_header.
+#
+#Default:
+# httpd_accel_single_host off
+
+#  TAG: httpd_accel_with_proxy	on|off
+#	If you want to use Squid as both a local httpd accelerator
+#	and as a proxy, change this to 'on'. Note however that your
+#	proxy users may have trouble to reach the accelerated domains
+#	unless their browsers are configured not to use this proxy for
+#	those domains (for example via the no_proxy browser configuration
+#	setting)
+#
+#Default:
+# httpd_accel_with_proxy off
+
+#  TAG: httpd_accel_uses_host_header	on|off
+#	HTTP/1.1 requests include a Host: header which is basically the
+#	hostname from the URL.  Squid can be an accelerator for
+#	different HTTP servers by looking at this header.  However,
+#	Squid does NOT check the value of the Host header, so it opens
+#	a big security hole.  We recommend that this option remain
+#	disabled unless you are sure of what you are doing.
+#
+#	However, you will need to enable this option if you run Squid
+#	as a transparent proxy.  Otherwise, virtual servers which
+#	require the Host: header will not be properly cached.
+#
+#Default:
+# httpd_accel_uses_host_header off
+
+
+# MISCELLANEOUS
+# -----------------------------------------------------------------------------
+
+#  TAG: dns_testnames
+#	The DNS tests exit as soon as the first site is successfully looked up
+#
+#	This test can be disabled with the -D command line option.
+#
+#Default:
+# dns_testnames netscape.com internic.net nlanr.net microsoft.com
+
+#  TAG: logfile_rotate
+#	Specifies the number of logfile rotations to make when you
+#	type 'squid -k rotate'.  The default is 10, which will rotate
+#	with extensions 0 through 9.  Setting logfile_rotate to 0 will
+#	disable the rotation, but the logfiles are still closed and
+#	re-opened.  This will enable you to rename the logfiles
+#	yourself just before sending the rotate signal.
+#
+#	Note, the 'squid -k rotate' command normally sends a USR1
+#	signal to the running squid process.  In certain situations
+#	(e.g. on Linux with Async I/O), USR1 is used for other
+#	purposes, so -k rotate uses another signal.  It is best to get
+#	in the habit of using 'squid -k rotate' instead of 'kill -USR1
+#	<pid>'.
+#
+#Default:
+# logfile_rotate 0
+
+#  TAG: append_domain
+#	Appends local domain name to hostnames without any dots in
+#	them.  append_domain must begin with a period.
+#
+#Example:
+# append_domain .yourdomain.com
+#
+#Default:
+# none
+
+#  TAG: tcp_recv_bufsize	(bytes)
+#	Size of receive buffer to set for TCP sockets.  Probably just
+#	as easy to change your kernel's default.  Set to zero to use
+#	the default buffer size.
+#
+#Default:
+# tcp_recv_bufsize 0 bytes
+
+#  TAG: err_html_text
+#	HTML text to include in error messages.  Make this a "mailto"
+#	URL to your admin address, or maybe just a link to your
+#	organizations Web page.
+#
+#	To include this in your error messages, you must rewrite
+#	the error template files (found in the "errors" directory).
+#	Wherever you want the 'err_html_text' line to appear,
+#	insert a %L tag in the error template file.
+#
+#Default:
+# none
+
+#  TAG: deny_info
+#	Usage:   deny_info err_page_name acl
+#	Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
+#
+#	This can be used to return a ERR_ page for requests which
+#	do not pass the 'http_access' rules.  A single ACL will cause
+#	the http_access check to fail.  If a 'deny_info' line exists
+#	for that ACL then Squid returns a corresponding error page.
+#
+#	You may use ERR_ pages that come with Squid or create your own pages
+#	and put them into the configured errors/ directory.
+#
+#Default:
+# none
+
+#  TAG: memory_pools	on|off
+#	If set, Squid will keep pools of allocated (but unused) memory
+#	available for future use.  If memory is a premium on your
+#	system and you believe your malloc library outperforms Squid 
+#	routines, disable this.
+#
+#Default:
+# memory_pools on
+
+#  TAG: memory_pools_limit	(bytes)
+#	Used only with memory_pools on:
+#	memory_pools_limit 50 MB
+#
+#	If set to a non-zero value, Squid will keep at most the specified
+#	limit of allocated (but unused) memory in memory pools. All free()
+#	requests that exceed this limit will be handled by your malloc
+#	library. Squid does not pre-allocate any memory, just safe-keeps
+#	objects that otherwise would be free()d. Thus, it is safe to set
+#	memory_pools_limit to a reasonably high value even if your
+#	configuration will use less memory.
+#
+#	If not set (default) or set to zero, Squid will keep all memory it
+#	can. That is, there will be no limit on the total amount of memory
+#	used for safe-keeping.
+#
+#	To disable memory allocation optimization, do not set
+#	memory_pools_limit to 0. Set memory_pools to "off" instead.
+#
+#	An overhead for maintaining memory pools is not taken into account
+#	when the limit is checked. This overhead is close to four bytes per
+#	object kept. However, pools may actually _save_ memory because of
+#	reduced memory thrashing in your malloc library.
+#
+#Default:
+# none
+
+#  TAG: forwarded_for	on|off
+#	If set, Squid will include your system's IP address or name
+#	in the HTTP requests it forwards.  By default it looks like
+#	this:
+#
+#		X-Forwarded-For: 192.1.2.3
+#
+#	If you disable this, it will appear as
+#
+#		X-Forwarded-For: unknown
+#
+#Default:
+# forwarded_for on
+
+#  TAG: log_icp_queries	on|off
+#	If set, ICP queries are logged to access.log. You may wish
+#	do disable this if your ICP load is VERY high to speed things
+#	up or to simplify log analysis.
+#
+#Default:
+# log_icp_queries on
+
+#  TAG: icp_hit_stale	on|off
+#	If you want to return ICP_HIT for stale cache objects, set this
+#	option to 'on'.  If you have sibling relationships with caches
+#	in other administrative domains, this should be 'off'.  If you only
+#	have sibling relationships with caches under your control, then
+#	it is probably okay to set this to 'on'.
+#
+#Default:
+# icp_hit_stale off
+
+#  TAG: minimum_direct_hops
+#	If using the ICMP pinging stuff, do direct fetches for sites
+#	which are no more than this many hops away.
+#
+#Default:
+# minimum_direct_hops 4
+
+#  TAG: minimum_direct_rtt
+#	If using the ICMP pinging stuff, do direct fetches for sites
+#	which are no more than this many rtt milliseconds away.
+#
+#Default:
+# minimum_direct_rtt 400
+
+#  TAG: cachemgr_passwd
+#	Specify passwords for cachemgr operations.
+#
+#	Usage: cachemgr_passwd password action action ...
+#
+#	Some valid actions are (see cache manager menu for a full list):
+#		5min
+#		60min
+#		asndb
+#		authenticator
+#		cbdata
+#		client_list
+#		comm_incoming
+#		config *
+#		counters
+#		delay
+#		digest_stats
+#		dns
+#		events
+#		filedescriptors
+#		fqdncache
+#		histograms
+#		http_headers
+#		info
+#		io
+#		ipcache
+#		mem
+#		menu
+#		netdb
+#		non_peers
+#		objects
+#		pconn
+#		peer_select
+#		redirector
+#		refresh
+#		server_list
+#		shutdown *
+#		store_digest
+#		storedir
+#		utilization
+#		via_headers
+#		vm_objects
+#
+#	* Indicates actions which will not be performed without a
+#	  valid password, others can be performed if not listed here.
+#
+#	To disable an action, set the password to "disable".
+#	To allow performing an action without a password, set the
+#	password to "none".
+#
+#	Use the keyword "all" to set the same password for all actions.
+#
+#Example:
+# cachemgr_passwd secret shutdown
+# cachemgr_passwd lesssssssecret info stats/objects
+# cachemgr_passwd disable all
+#
+#Default:
+# none
+
+#  TAG: store_avg_object_size	(kbytes)
+#	Average object size, used to estimate number of objects your
+#	cache can hold.  See doc/Release-Notes-1.1.txt.  The default is
+#	13 KB.
+#
+#Default:
+# store_avg_object_size 13 KB
+
+#  TAG: store_objects_per_bucket
+#	Target number of objects per bucket in the store hash table.
+#	Lowering this value increases the total number of buckets and
+#	also the storage maintenance rate.  The default is 50.
+#
+#Default:
+# store_objects_per_bucket 20
+
+#  TAG: client_db	on|off
+#	If you want to disable collecting per-client statistics, then
+#	turn off client_db here.
+#
+#Default:
+# client_db on
+
+#  TAG: netdb_low
+#  TAG: netdb_high
+#	The low and high water marks for the ICMP measurement
+#	database.  These are counts, not percents.  The defaults are
+#	900 and 1000.  When the high water mark is reached, database
+#	entries will be deleted until the low mark is reached.
+#
+#Default:
+# netdb_low 900
+# netdb_high 1000
+
+#  TAG: netdb_ping_period
+#	The minimum period for measuring a site.  There will be at
+#	least this much delay between successive pings to the same
+#	network.  The default is five minutes.
+#
+#Default:
+# netdb_ping_period 5 minutes
+
+#  TAG: query_icmp	on|off
+#	If you want to ask your peers to include ICMP data in their ICP
+#	replies, enable this option.
+#
+#	If your peer has configured Squid (during compilation) with
+#	'--enable-icmp' then that peer will send ICMP pings to origin server
+#	sites of the URLs it receives.  If you enable this option then the
+#	ICP replies from that peer will include the ICMP data (if available).
+#	Then, when choosing a parent cache, Squid will choose the parent with
+#	the minimal RTT to the origin server.  When this happens, the
+#	hierarchy field of the access.log will be
+#	"CLOSEST_PARENT_MISS".  This option is off by default.
+#
+#Default:
+# query_icmp off
+
+#  TAG: test_reachability	on|off
+#	When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
+#	instead of ICP_MISS if the target host is NOT in the ICMP
+#	database, or has a zero RTT.
+#
+#Default:
+# test_reachability off
+
+#  TAG: buffered_logs	on|off
+#	Some log files (cache.log, useragent.log) are written with
+#	stdio functions, and as such they can be buffered or
+#	unbuffered.  By default they will be unbuffered. Buffering them
+#	can speed up the writing slightly (though you are unlikely to
+#	need to worry).
+#
+#Default:
+# buffered_logs off
+
+#  TAG: reload_into_ims	on|off
+#	When you enable this option, client no-cache or ``reload''
+#	requests will be changed to If-Modified-Since requests.
+#	Doing this VIOLATES the HTTP standard.  Enabling this
+#	feature could make you liable for problems which it
+#	causes.
+#	
+#	see also refresh_pattern for a more selective approach.
+#
+#	This option may be disabled by using --disable-http-violations
+#	with the configure script.
+#
+#Default:
+# reload_into_ims off
+
+#  TAG: always_direct
+#	Usage: always_direct allow|deny [!]aclname ...
+#
+#	Here you can use ACL elements to specify requests which should
+#	ALWAYS be forwarded directly to origin servers.  For example,
+#	to always directly forward requests for local servers use
+#	something like:
+#
+#		acl local-servers dstdomain my.domain.net
+#		always_direct allow local-servers
+#
+#	To always forward FTP requests directly, use
+#
+#		acl FTP proto FTP
+#		always_direct allow FTP
+#
+#	NOTE: There is a similar, but opposite option named
+#	'never_direct'.  You need to be aware that "always_direct deny
+#	foo" is NOT the same thing as "never_direct allow foo".  You
+#	may need to use a deny rule to exclude a more-specific case of
+#	some other rule.  Example:
+#
+#		acl local-external dstdomain external.foo.net
+#		acl local-servers dstdomain  foo.net
+#		always_direct deny local-external
+#		always_direct allow local-servers
+#
+#	This option replaces some v1.1 options such as local_domain
+#	and local_ip.
+#
+#Default:
+# none
+
+#  TAG: never_direct
+#	Usage: never_direct allow|deny [!]aclname ...
+#
+#	never_direct is the opposite of always_direct.  Please read
+#	the description for always_direct if you have not already.
+#
+#	With 'never_direct' you can use ACL elements to specify
+#	requests which should NEVER be forwarded directly to origin
+#	servers.  For example, to force the use of a proxy for all
+#	requests, except those in your local domain use something like:
+#
+#		acl local-servers dstdomain foo.net
+#		acl all src 0.0.0.0/0.0.0.0
+#		never_direct deny local-servers
+#		never_direct allow all
+#	
+#	or if squid is inside a firewall and there is local intranet
+#	servers inside the firewall then use something like:
+#
+#		acl local-intranet dstdomain foo.net
+#		acl local-external dstdomain external.foo.net
+#		always_direct deny local-external
+#		always_direct allow local-intranet
+#		never_direct allow all
+#	
+#	This option replaces some v1.1 options such as inside_firewall
+#	and firewall_ip.
+#
+#Default:
+# none
+
+#  TAG: anonymize_headers
+#	Usage: anonymize_headers allow|deny header_name ...
+#
+#	This option replaces the old 'http_anonymizer' option with
+#	something that is much more configurable.  You may now
+#	specify exactly which headers are to be allowed, or which
+#	are to be removed from outgoing requests.
+#
+#	There are two methods of using this option.  You may either
+#	allow specific headers (thus denying all others), or you
+#	may deny specific headers (thus allowing all others).
+#
+#	For example, to achieve the same behavior as the old
+#	'http_anonymizer standard' option, you should use:
+#
+#		anonymize_headers deny From Referer Server
+#		anonymize_headers deny User-Agent WWW-Authenticate Link
+#		
+#	Or, to reproduce the old 'http_anonymizer paranoid' feature
+#	you should use:
+#
+#		anonymize_headers allow Allow Authorization Cache-Control
+#		anonymize_headers allow Content-Encoding Content-Length
+#		anonymize_headers allow Content-Type Date Expires Host
+#		anonymize_headers allow If-Modified-Since Last-Modified
+#		anonymize_headers allow Location Pragma Accept
+#		anonymize_headers allow Accept-Encoding Accept-Language
+#		anonymize_headers allow Content-Language Mime-Version
+#		anonymize_headers allow Retry-After Title Connection
+#		anonymize_headers allow Proxy-Connection
+#
+#	NOTE: You can not mix "allow" and "deny".  All 'anonymize_headers'
+#	lines must have the same second argument.
+#
+#	By default, all headers are allowed (no anonymizing is
+#	performed).
+#
+#Default:
+# none
+
+#  TAG: fake_user_agent
+#	If you filter the User-Agent header with 'anonymize_headers' it
+#	may cause some Web servers to refuse your request.  Use this to
+#	fake one up.  For example:
+#
+#	fake_user_agent Nutscrape/1.0 (CP/M; 8-bit)
+#	(credit to Paul Southworth pauls@etext.org for this one!)
+#
+#Default:
+# none
+
+#  TAG: icon_directory
+#	Where the icons are stored. These are normally kept in
+#	/usr/lib/squid/icons
+#
+#Default:
+# icon_directory /usr/lib/squid/icons
+
+#  TAG: error_directory
+#	Directory where the error files are read from.
+#	/usr/lib/squid/errors contains sets of error files
+#	in different languages. The default error directory
+#	is /etc/squid/errors, which is a link to one of these
+#	error sets.
+#
+#	If you wish to create your own versions of the error files,
+#	either to customize them to suit your language or company,
+#	copy the template English files to another
+#	directory and point this tag at them.
+#	
+#error_directory /etc/squid/errors
+#
+#Default:
+# error_directory /etc/squid/errors
+
+#  TAG: minimum_retry_timeout	(seconds)
+#	This specifies the minimum connect timeout, for when the
+#	connect timeout is reduced to compensate for the availability
+#	of multiple IP addresses.
+#
+#	When a connection to a host is initiated, and that host has
+#	several IP addresses, the default connection timeout is reduced
+#	by dividing it by the number of addresses.  So, a site with 15
+#	addresses would then have a timeout of 8 seconds for each
+#	address attempted.  To avoid having the timeout reduced to the
+#	point where even a working host would not have a chance to
+#	respond, this setting is provided.  The default, and the
+#	minimum value, is five seconds, and the maximum value is sixty
+#	seconds, or half of connect_timeout, whichever is greater and
+#	less than connect_timeout.
+#
+#Default:
+# minimum_retry_timeout 5 seconds
+
+#  TAG: maximum_single_addr_tries
+#	This sets the maximum number of connection attempts for a
+#	host that only has one address (for multiple-address hosts,
+#	each address is tried once).
+#
+#	The default value is three tries, the (not recommended)
+#	maximum is 255 tries.  A warning message will be generated
+#	if it is set to a value greater than ten.
+#
+#Default:
+# maximum_single_addr_tries 3
+
+#  TAG: snmp_port
+#	Squid can now serve statistics and status information via SNMP.
+#	By default it listens to port 3401 on the machine. If you don't
+#	wish to use SNMP, set this to "0".
+#
+#	NOTE: SNMP support requires use the --enable-snmp configure
+#	command line option.
+#
+#Default:
+# snmp_port 3401
+
+#  TAG: snmp_access
+#	Allowing or denying access to the SNMP port.
+#
+#	All access to the agent is denied by default.
+#	usage:
+#
+#	snmp_access allow|deny [!]aclname ...
+#
+#Example:
+# snmp_access allow snmppublic localhost
+# snmp_access deny all
+#
+#Default:
+# snmp_access deny all
+
+#  TAG: snmp_incoming_address
+#  TAG: snmp_outgoing_address
+#	Just like 'udp_incoming_address' above, but for the SNMP port.
+#
+#	snmp_incoming_address	is used for the SNMP socket receiving
+#				messages from SNMP agents.
+#	snmp_outgoing_address	is used for SNMP packets returned to SNMP
+#				agents.
+#
+#	The default snmp_incoming_address (0.0.0.0) is to listen on all
+#	available network interfaces.
+#
+#	If snmp_outgoing_address is set to 255.255.255.255 (the default)
+#	then it will use the same socket as snmp_incoming_address. Only
+#	change this if you want to have SNMP replies sent using another
+#	address than where this Squid listens for SNMP queries.
+#
+#	NOTE, snmp_incoming_address and snmp_outgoing_address can not have
+#	the same value since they both use port 3401.
+#
+#Default:
+# snmp_incoming_address 0.0.0.0
+# snmp_outgoing_address 255.255.255.255
+
+#  TAG: as_whois_server
+#	WHOIS server to query for AS numbers.  NOTE: AS numbers are
+#	queried only when Squid starts up, not for every request.
+#
+#Default:
+# as_whois_server whois.ra.net
+# as_whois_server whois.ra.net
+
+#  TAG: wccp_router
+#	Use this option to define your WCCP ``home'' router for
+#	Squid.   Setting the 'wccp_router' to 0.0.0.0 (the default)
+#	disables WCCP.
+#
+#Default:
+# wccp_router 0.0.0.0
+
+#  TAG: wccp_version
+#	According to some users, Cisco IOS 11.2 only supports WCCP
+#	version 3.  If you're using that version of IOS, change
+#	this value to 3.
+#
+#Default:
+# wccp_version 4
+
+#  TAG: wccp_incoming_address
+#  TAG: wccp_outgoing_address
+#        wccp_incoming_address   Use this option if you require WCCP
+#				messages to be received on only one
+#				interface.  Do NOT use this option if
+#				you're unsure how many interfaces you
+#				have, or if you know you have only one
+#				interface.
+#
+#	wccp_outgoing_address	Use this option if you require WCCP
+#				messages to be sent out on only one
+#				interface.  Do NOT use this option if
+#				you're unsure how many interfaces you
+#				have, or if you know you have only one
+#				interface.
+#
+#        The default behavior is to not bind to any specific address.
+#
+#        NOTE, wccp_incoming_address and wccp_outgoing_address can not have
+#        the same value since they both use port 2048.
+#
+#Default:
+# wccp_incoming_address 0.0.0.0
+# wccp_outgoing_address 255.255.255.255
+
+
+# DELAY POOL PARAMETERS (all require DELAY_POOLS compilation option)
+# -----------------------------------------------------------------------------
+
+#  TAG: delay_pools
+#	This represents the number of delay pools to be used.  For example,
+#	if you have one class 2 delay pool and one class 3 delays pool, you
+#	have a total of 2 delay pools.
+#
+#	To enable this option, you must use --enable-delay-pools with the
+#	configure script.
+#
+#Default:
+# delay_pools 0
+
+#  TAG: delay_class
+#	This defines the class of each delay pool.  There must be exactly one
+#	delay_class line for each delay pool.  For example, to define two
+#	delay pools, one of class 2 and one of class 3, the settings above
+#	and here would be:
+#
+#Example:
+# delay_pools 2      # 2 delay pools
+# delay_class 1 2    # pool 1 is a class 2 pool
+# delay_class 2 3    # pool 2 is a class 3 pool
+#
+#	The delay pool classes are:
+#
+#		class 1		Everything is limited by a single aggregate
+#				bucket.
+#
+#		class 2 	Everything is limited by a single aggregate
+#				bucket as well as an "individual" bucket chosen
+#				from bits 25 through 32 of the IP address.
+#
+#		class 3		Everything is limited by a single aggregate
+#				bucket as well as a "network" bucket chosen
+#				from bits 17 through 24 of the IP address and a
+#				"individual" bucket chosen from bits 17 through
+#				32 of the IP address.
+#
+#	NOTE: If an IP address is a.b.c.d
+#		-> bits 25 through 32 are "d"
+#		-> bits 17 through 24 are "c"
+#		-> bits 17 through 32 are "c * 256 + d"
+#
+#Default:
+# none
+
+#  TAG: delay_access
+#	This is used to determine which delay pool a request falls into.
+#	The first matched delay pool is always used, i.e., if a request falls
+#	into delay pool number one, no more delay are checked, otherwise the
+#	rest are checked in order of their delay pool number until they have
+#	all been checked.  For example, if you want some_big_clients in delay
+#	pool 1 and lotsa_little_clients in delay pool 2:
+#
+#Example:
+# delay_access 1 allow some_big_clients
+# delay_access 1 deny all
+# delay_access 2 allow lotsa_little_clients
+# delay_access 2 deny all
+#
+#Default:
+# none
+
+#  TAG: delay_parameters
+#	This defines the parameters for a delay pool.  Each delay pool has
+#	a number of "buckets" associated with it, as explained in the
+#	description of delay_class.  For a class 1 delay pool, the syntax is:
+#
+#delay_parameters pool aggregate
+#
+#	For a class 2 delay pool:
+#
+#delay_parameters pool aggregate individual
+#
+#	For a class 3 delay pool:
+#
+#delay_parameters pool aggregate network individual
+#
+#	The variables here are:
+#
+#		pool		a pool number - ie, a number between 1 and the
+#				number specified in delay_pools as used in
+#				delay_class lines.
+#
+#		aggregate	the "delay parameters" for the aggregate bucket
+#				(class 1, 2, 3).
+#
+#		individual	the "delay parameters" for the individual
+#				buckets (class 2, 3).
+#
+#		network		the "delay parameters" for the network buckets
+#				(class 3).
+#
+#	A pair of delay parameters is written restore/maximum, where restore is
+#	the number of bytes (not bits - modem and network speeds are usually
+#	quoted in bits) per second placed into the bucket, and maximum is the
+#	maximum number of bytes which can be in the bucket at any time.
+#
+#	For example, if delay pool number 1 is a class 2 delay pool as in the
+#	above example, and is being used to strictly limit each host to 64kbps
+#	(plus overheads), with no overall limit, the line is:
+#
+#delay_parameters 1 -1/-1 8000/8000
+#
+#	Note that the figure -1 is used to represent "unlimited".
+#
+#	And, if delay pool number 2 is a class 3 delay pool as in the above
+#	example, and you want to limit it to a total of 256kbps (strict limit)
+#	with each 8-bit network permitted 64kbps (strict limit) and each
+#	individual host permitted 4800bps with a bucket maximum size of 64kb
+#	to permit a decent web page to be downloaded at a decent speed
+#	(if the network is not being limited due to overuse) but slow down
+#	large downloads more significantly:
+#
+#delay_parameters 2 32000/32000 8000/8000 600/64000
+#
+#	There must be one delay_parameters line for each delay pool.
+#
+#Default:
+# none
+
+#  TAG: delay_initial_bucket_level	(percent, 0-100)
+#	The initial bucket percentage is used to determine how much is put
+#	in each bucket when squid starts, is reconfigured, or first notices
+#	a host accessing it (in class 2 and class 3, individual hosts and
+#	networks only have buckets associated with them once they have been
+#	"seen" by squid).
+#
+#Default:
+# delay_initial_bucket_level 50
+
+#  TAG: incoming_icp_average
+#  TAG: incoming_http_average
+#  TAG: incoming_dns_average
+#  TAG: min_icp_poll_cnt
+#  TAG: min_dns_poll_cnt
+#  TAG: min_http_poll_cnt
+#	Heavy voodoo here.  I can't even believe you are reading this.
+#	Are you crazy?  Don't even think about adjusting these unless
+#	you understand the algorithms in comm_select.c first!
+#
+#Default:
+# incoming_icp_average 6
+# incoming_http_average 4
+# incoming_dns_average 4
+# min_icp_poll_cnt 8
+# min_dns_poll_cnt 8
+# min_http_poll_cnt 8
+
+#  TAG: max_open_disk_fds
+#	To avoid having disk as the I/O bottleneck Squid can optionally
+#	bypass the on-disk cache if more than this amount of disk file
+#	descriptors are open.
+#
+#	A value of 0 indicates no limit.
+#
+#Default:
+# max_open_disk_fds 0
+
+#  TAG: offline_mode
+#	Enable this option and Squid will never try to validate cached
+#	objects.
+#
+#Default:
+# offline_mode off
+
+#  TAG: uri_whitespace
+#	What to do with requests that have whitespace characters in the
+#	URI.  Options:
+#
+#	strip:  The whitespace characters are stripped out of the URL.
+#		This is the behavior recommended by RFC2616.
+#	deny:   The request is denied.  The user receives an "Invalid
+#		Request" message.
+#	allow:  The request is allowed and the URI is not changed.  The
+#		whitespace characters remain in the URI.  Note the
+#		whitespace is passed to redirector processes if they
+#		are in use.
+#	encode:	The request is allowed and the whitespace characters are
+#		encoded according to RFC1738.  This could be considered
+#		a violation of the HTTP/1.1
+#		RFC because proxies are not allowed to rewrite URI's.
+#	chop:	The request is allowed and the URI is chopped at the
+#		first whitespace.  This might also be considered a
+#		violation.
+#
+#Default:
+# uri_whitespace strip
+
+#  TAG: broken_posts
+#	A list of ACL elements which, if matched, causes Squid to send
+#	a extra CRLF pair after the body of a PUT/POST request.
+#
+#	Some HTTP servers has broken implementations of PUT/POST,
+#	and rely on a extra CRLF pair sent by some WWW clients.
+#
+#	Quote from RFC 2068 section 4.1 on this matter:
+#
+#	  Note: certain buggy HTTP/1.0 client implementations generate an
+#	  extra CRLF's after a POST request. To restate what is explicitly
+#	  forbidden by the BNF, an HTTP/1.1 client must not preface or follow
+#	  a request with an extra CRLF.
+#
+#Example:
+# acl buggy_server url_regex ^http://....
+# broken_posts allow buggy_server
+#
+#Default:
+# none
+
+#  TAG: mcast_miss_addr
+# Note: This option is only available if Squid is rebuilt with the
+#       -DMULTICAST_MISS_STREAM option
+#
+#	If you enable this option, every "cache miss" URL will
+#	be sent out on the specified multicast address.
+#
+#	Do not enable this option unless you are are absolutely
+#	certain you understand what you are doing.
+#
+#Default:
+# mcast_miss_addr 255.255.255.255
+
+#  TAG: mcast_miss_ttl
+# Note: This option is only available if Squid is rebuilt with the
+#       -DMULTICAST_MISS_TTL option
+#
+#	This is the time-to-live value for packets multicasted
+#	when multicasting off cache miss URLs is enabled.  By
+#	default this is set to 'site scope', i.e. 16.
+#
+#Default:
+# mcast_miss_ttl 16
+
+#  TAG: mcast_miss_port
+# Note: This option is only available if Squid is rebuilt with the
+#       -DMULTICAST_MISS_STREAM option
+#
+#	This is the port number to be used in conjunction with
+#	'mcast_miss_addr'.
+#
+#Default:
+# mcast_miss_port 3135
+
+#  TAG: mcast_miss_encode_key
+# Note: This option is only available if Squid is rebuilt with the
+#       -DMULTICAST_MISS_STREAM option
+#
+#	The URLs that are sent in the multicast miss stream are
+#	encrypted.  This is the encryption key.
+#
+#Default:
+# mcast_miss_encode_key XXXXXXXXXXXXXXXX
+
+#  TAG: nonhierarchical_direct
+#	By default, Squid will send any non-hierarchical requests
+#	(matching hierarchy_stoplist or not cachable request type) direct
+#	to origin servers.
+#
+#	If you set this to off, then Squid will prefer to send these
+#	requests to parents.
+#
+#	Note that in most configurations, by turning this off you will only
+#	add latency to these request without any improvement in global hit
+#	ratio.
+#
+#	If you are inside an firewall then see never_direct instead of
+#	this directive.
+#
+#Default:
+# nonhierarchical_direct on
+
+#  TAG: prefer_direct
+#	Normally Squid tries to use parents for most requests. If you by some
+#	reason like it to first try going direct and only use a parent if
+#	going direct fails then set this to off.
+#
+#	By combining nonhierarchical_direct off and prefer_direct on you
+#	can set up Squid to use a parent as a backup path if going direct
+#	fails.
+#
+#Default:
+# prefer_direct off
+
+#  TAG: strip_query_terms
+#	By default, Squid strips query terms from requested URLs before
+#	logging.  This protects your user's privacy.
+#
+#Default:
+# strip_query_terms on
+
+#  TAG: coredump_dir
+#	By default Squid leaves core files in the first cache_dir
+#	directory.  If you set 'coredump_dir' to a directory
+#	that exists, Squid will chdir() to that directory at startup
+#	and coredump files will be left there.
+#
+#Default:
+# none
+
+#  TAG: redirector_bypass
+#	When this is 'on', a request will not go through the
+#	redirector if all redirectors are busy.  If this is 'off'
+#	and the redirector queue grows too large, Squid will exit
+#	with a FATAL error and ask you to increase the number of
+#	redirectors.  You should only enable this if the redirectors
+#	are not critical to your caching system.  If you use
+#	redirectors for access control, and you enable this option,
+#	then users may have access to pages that they should not
+#	be allowed to request.
+#
+#Default:
+# redirector_bypass off
+
+#  TAG: ignore_unknown_nameservers
+#	By default Squid checks that DNS responses are received
+#	from the same IP addresses that they are sent to.  If they
+#	don't match, Squid ignores the response and writes a warning
+#	message to cache.log.  You can allow responses from unknown
+#	nameservers by setting this option to 'off'.
+#
+#Default:
+# ignore_unknown_nameservers on
+
+#  TAG: digest_generation
+# Note: This option is only available if Squid is rebuilt with the
+#       --enable-cache-digests option
+#
+#	This controls whether the server will generate a Cache Digest
+#	of its contents.  By default, Cache Digest generation is
+#	enabled if Squid is compiled with USE_CACHE_DIGESTS defined.
+#
+#Default:
+# digest_generation on
+
+#  TAG: digest_bits_per_entry
+# Note: This option is only available if Squid is rebuilt with the
+#       --enable-cache-digests option
+#
+#	This is the number of bits of the server's Cache Digest which
+#	will be associated with the Digest entry for a given HTTP
+#	Method and URL (public key) combination.  The default is 5.
+#
+#Default:
+# digest_bits_per_entry 5
+
+#  TAG: digest_rebuild_period	(seconds)
+# Note: This option is only available if Squid is rebuilt with the
+#       --enable-cache-digests option
+#
+#	This is the number of seconds between Cache Digest rebuilds.
+#
+#Default:
+# digest_rebuild_period 1 hour
+
+#  TAG: digest_rewrite_period	(seconds)
+# Note: This option is only available if Squid is rebuilt with the
+#       --enable-cache-digests option
+#
+#	This is the number of seconds between Cache Digest writes to
+#	disk.
+#
+#Default:
+# digest_rewrite_period 1 hour
+
+#  TAG: digest_swapout_chunk_size	(bytes)
+# Note: This option is only available if Squid is rebuilt with the
+#       --enable-cache-digests option
+#
+#	This is the number of bytes of the Cache Digest to write to
+#	disk at a time.  It defaults to 4096 bytes (4KB), the Squid
+#	default swap page.
+#
+#Default:
+# digest_swapout_chunk_size 4096 bytes
+
+#  TAG: digest_rebuild_chunk_percentage	(percent, 0-100)
+# Note: This option is only available if Squid is rebuilt with the
+#       --enable-cache-digests option
+#
+#	This is the percentage of the Cache Digest to be scanned at a
+#	time.  By default it is set to 10% of the Cache Digest.
+#
+#Default:
+# digest_rebuild_chunk_percentage 10
+
+#  TAG: chroot
+#	Use this to have Squid do a chroot() while initializing.  This
+#	also causes Squid to fully drop root privileges after
+#	initializing.  This means, for example, that if you use a HTTP
+#	port less than 1024 and try to reconfigure, you will get an
+#	error.
+#
+#Default:
+# none
+
+#  TAG: client_persistent_connections
+#  TAG: server_persistent_connections
+#	Persistent connection support for clients and servers.  By
+#	default, Squid uses persistent connections (when allowed)
+#	with its clients and servers.  You can use these options to
+#	disable persistent connections with clients and/or servers.
+#
+#Default:
+# client_persistent_connections on
+# server_persistent_connections on
+
+#  TAG: pipeline_prefetch
+#	To boost the performance of pipelined requests to closer
+#	match that of a non-proxied environment Squid tries to fetch
+#	up to two requests in parallell from a pipeline.
+#
+#Default:
+# pipeline_prefetch on
+
+#  TAG: extension_methods
+#	Squid only knows about standardized HTTP request methods.
+#	You can add up to 20 additional "extension" methods here.
+#
+#Default:
+# none
+
+#  TAG: high_response_time_warning	(msec)
+#	If the one-minute median response time exceeds this value,
+#	Squid prints a WARNING with debug level 0 to get the
+#	administrators attention.  The value is in milliseconds.
+#
+#Default:
+# high_response_time_warning 0
+
+#  TAG: high_page_fault_warning
+#	If the one-minute average page fault rate exceeds this
+#	value, Squid prints a WARNING with debug level 0 to get
+#	the administrators attention.  The value is in page faults
+#	per second.
+#
+#Default:
+# high_page_fault_warning 0
+
+#  TAG: high_memory_warning
+#	If the memory usage (as determined by mallinfo) exceeds
+#	value, Squid prints a WARNING with debug level 0 to get
+#	the administrators attention.
+#
+#Default:
+# high_memory_warning 0
+
+#  TAG: store_dir_select_algorithm
+#	Set this to 'round-robin' as an alternative.
+#
+#Default:
+# store_dir_select_algorithm least-load
+
+#  TAG: forward_log
+# Note: This option is only available if Squid is rebuilt with the
+#       -DWIP_FWD_LOG option
+#
+#	Logs the server-side requests.
+#
+#	This is currently work in progress.
+#
+#Default:
+# none
+
+#  TAG: ie_refresh	on|off
+#	Microsoft Internet Explorer up until version 5.5 Service
+#	Pack 1 has an issue with transparent proxies, wherein it
+#	is impossible to force a refresh.  Turning this on provides
+#	a partial fix to the problem, by causing all IMS-REFRESH
+#	requests from older IE versions to check the origin server
+#	for fresh content.  This reduces hit ratio by some amount
+#	(~10% in my experience), but allows users to actually get
+#	fresh content when they want it.  Note that because Squid
+#	cannot tell if the user is using 5.5 or 5.5SP1, the behavior
+#	of 5.5 is unchanged from old versions of Squid (i.e. a
+#	forced refresh is impossible).  Newer versions of IE will,
+#	hopefully, continue to have the new behavior and will be
+#	handled based on that assumption.  This option defaults to
+#	the old Squid behavior, which is better for hit ratios but
+#	worse for clients using IE, if they need to be able to
+#	force fresh content.
+#
+#Default:
+# ie_refresh off
+
diff --git a/proxy_wizard/scripts/testport.sh b/proxy_wizard/scripts/testport.sh
new file mode 100755
index 00000000..e800dbd5
--- /dev/null
+++ b/proxy_wizard/scripts/testport.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# 
+# Wizard
+#
+# Copyright (C) 2000,2001 Mandrakesoft.
+# 
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# See file LICENSE for further informations on licensing terms.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+# 
+# Authors: Jerome Dumonteil, Maurizio De Cecco, Enzo Maggi
+# icons: Helene Durosini <ln@mandrakesoft.com>
+# <corporate@mandrakesoft.com> http://www.mandrakesoft.com
+
+# 
+# squid	wizard
+
+echo_debug $0
+
+[ -r /etc/services ] || exit 0
+
+echo_debug $wiz_squid_port
+
+# we now that we got a positive integer (uint)
+
+[ $wiz_squid_port -eq 8080 ] && exit 0
+[ $wiz_squid_port -lt 1024 ] && exit 2
+[ $wiz_squid_port -ge 65536 ] && exit 2
+
+grep -qs "[[:space:]]$wiz_squid_port/tcp" /etc/services && {
+	echo_debug "err service"
+	exit 1
+}
+echo_debug "no pb"
+exit 0
+