merged strings of wiz files, to make them translator-friendly

and generated a *.po file

13 files changed, 538 insertions, 2187 deletions

diff --git a/client_wizard/client.wiz b/client_wizard/client.wiz
index 804ea19d..a31ad7f7 100644
--- a/client_wizard/client.wiz
+++ b/client_wizard/client.wiz
@@ -87,18 +87,7 @@
 		<Info
 			name="info10"
 			alignement="Center"
-			helpText="A client of your local network is a machine connected to the"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info1"
-			alignement="Center"
-			helpText="network having its own name and IP number."
+			helpText="A client of your local network is a machine connected to the network having its own name and IP number."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -130,18 +119,7 @@
 		<Info
 			name="info28"
 			alignement="Center"
-			helpText="The server will use the informations you enter here to make the name"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info29"
-			alignement="Center"
-			helpText="of the client available to other machines into your network."
+			helpText="The server will use the informations you enter here to make the name of the client available to other machines into your network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -213,29 +191,7 @@
 		<Info
 			name="info3"
 			alignement="East"
-			helpText="Your client on the network will be identified by  name, as in"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="East"
-			helpText="clientname.company.net. Every machine on the network must have"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info4"
-			alignement="East"
-			helpText="an (unique) IP address, in the usual dotted syntax."
+			helpText="Your client on the network will be identified by  name, as in clientname.company.net. Every machine on the network must have a (unique) IP address, in the usual dotted syntax."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -268,7 +224,7 @@
 			name="wiz_client_name"
 			variableName="wiz_client_name"
 			alignement="Fill"
-			helpText="Name of the machine :"
+			helpText="Name of the machine:"
 			guiType="textfield"
 			editable="true"
 			fontName="Default"
@@ -284,7 +240,7 @@
 			name="wiz_client_ip"
 			variableName="wiz_client_ip"
 			alignement="Fill"
-			helpText="IP number of the machine :"
+			helpText="IP number of the machine:"
 			guiType="textfield"
 			editable="true"
 			fontName="Default"
@@ -363,18 +319,7 @@
 		<Info
 			name="info203"
 			alignement="Center"
-			helpText="Press next if you want to change the already existing value,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info22"
-			alignement="Center"
-			helpText="or back to correct your choice."
+			helpText="Press next if you want to change the already existing value, or back to correct your choice."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -481,18 +426,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the Client configuration"
+			helpText="If you choose to configure now, you will automatically continue with the Client configuration"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -559,18 +493,8 @@
 		<Info
 			name="info3"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="East"
-			helpText="needed to add a client to your network:"
+			helpText="The wizard collected the following parameters
+needed to add a client to your network:"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -633,18 +557,7 @@
 		<Info
 			name="info5"
 			alignement="East"
-			helpText="To accept these values, and add your client, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info17"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and add your client, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/db_wizard/db.wiz b/db_wizard/db.wiz
index db4fdfe5..094161c0 100644
--- a/db_wizard/db.wiz
+++ b/db_wizard/db.wiz
@@ -102,18 +102,7 @@
 		<Info
 			name="info3"
 			alignement="Center"
-			helpText="This wizard will help you configuring"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info4"
-			alignement="Center"
-			helpText="the MySQL Database Server for your network."
+			helpText="This wizard will help you configuring the MySQL Database Server for your network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -208,18 +197,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the MySQL Database configuration"
+			helpText="If you choose to configure now, you will automatically continue with the MySQL Database configuration"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -370,18 +348,8 @@
 		<Info
 			name="info14"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info15"
-			alignement="East"
-			helpText="needed to configure your MySQL Database Server"
+			helpText="The wizard collected the following parameters
+needed to configure your MySQL Database Server"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -429,18 +397,7 @@
 		<Info
 			name="info18"
 			alignement="East"
-			helpText="To accept this value, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="East"
-			helpText="\qConfirm\q or use the Back button to correct them."
+			helpText="To accept this value, and configure your server, click on \qConfirm\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -580,18 +537,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="The wizard successfully configured your"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info25"
-			alignement="Center"
-			helpText="MySQL Database Server"
+			helpText="The wizard successfully configured your MySQL Database Server"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/dhcp_wizard/dhcp.wiz b/dhcp_wizard/dhcp.wiz
index 0411efc3..88f6c36a 100644
--- a/dhcp_wizard/dhcp.wiz
+++ b/dhcp_wizard/dhcp.wiz
@@ -92,18 +92,7 @@
 		<Info
 			name="info5"
 			alignement="Center"
-			helpText="DHCP is a service that automatically assigns"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="Center"
-			helpText="networking addresses to your workstations."
+			helpText="DHCP is a service that automatically assigns networking addresses to your workstations."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -114,18 +103,7 @@
 		<Info
 			name="info"
 			alignement="Center"
-			helpText="This wizard will help you configuring"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info1"
-			alignement="Center"
-			helpText="the DHCP services of your server."
+			helpText="This wizard will help you configuring the DHCP services of your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -181,29 +159,7 @@
 		<Info
 			name="info3"
 			alignement="East"
-			helpText="Select the range of addresses assigned to the workstations"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info7"
-			alignement="East"
-			helpText="by the DHCP service; unless you have special needs,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info9"
-			alignement="East"
-			helpText="you can safely accept the proposed values."
+			helpText="Select the range of addresses assigned to the workstations by the DHCP service; unless you have special needs, you can safely accept the proposed values."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -347,18 +303,8 @@
 		<Info
 			name="info13"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info14"
-			alignement="East"
-			helpText="needed to configure your DHCP service:"
+			helpText="The wizard collected the following parameters
+needed to configure your DHCP service:"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -421,18 +367,7 @@
 		<Info
 			name="info17"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info18"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -475,18 +410,7 @@
 		<Info
 			name="info21"
 			alignement="Center"
-			helpText="The wizard successfully configured the DHCP"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="Center"
-			helpText="services of your server."
+			helpText="The wizard successfully configured the DHCP services of your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -583,18 +507,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the DHCP configuration"
+			helpText="If you choose to configure now, you will automatically continue with the DHCP configuration"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/dns_wizard/dns.wiz b/dns_wizard/dns.wiz
index 0fca8b83..44578939 100644
--- a/dns_wizard/dns.wiz
+++ b/dns_wizard/dns.wiz
@@ -89,18 +89,7 @@
 		<Info
 			name="info10"
 			alignement="Center"
-			helpText="DNS (Domain Name Server) is the service that put"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info1"
-			alignement="Center"
-			helpText="in correspondance a machine with an internet host name"
+			helpText="DNS (Domain Name Server) is the service that put in correspondance a machine with an internet host name."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -121,40 +110,7 @@
 		<Info
 			name="info14"
 			alignement="Center"
-			helpText="This wizard will help you configuring the DNS"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info"
-			alignement="Center"
-			helpText="services of your server. This configuration will"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info28"
-			alignement="Center"
-			helpText="provide a local DNS service for local computers names,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info29"
-			alignement="Center"
-			helpText="with non-local requests forwarded to an outside DNS."
+			helpText="This wizard will help you configuring the DNS services of your server. This configuration will provide a local DNS service for local computers names, with non-local requests forwarded to an outside DNS."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -215,40 +171,7 @@
 		<Info
 			name="info3"
 			alignement="East"
-			helpText="DNS will allow your network to communicate with the Internet using"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="East"
-			helpText="standard internet host names.  In order to configure DNS, you must"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info4"
-			alignement="East"
-			helpText="provide the IP address of primary and secondary DNS server; usually"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info12"
-			alignement="East"
-			helpText="this address are given by your Internet provider."
+			helpText="DNS will allow your network to communicate with the Internet using standard internet host names.  In order to configure DNS, you must provide the IP address of primary and secondary DNS server; usually this address are given by your Internet provider."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -419,18 +342,7 @@
 		<Info
 			name="info203"
 			alignement="Center"
-			helpText="Your setting could be accepted, but you will not be able to identify"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info22"
-			alignement="Center"
-			helpText="machine names outside your local network."
+			helpText="Your setting could be accepted, but you will not be able to identify machine names outside your local network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -558,18 +470,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the DNS configuration"
+			helpText="If you choose to configure now, you will automatically continue with the DNS configuration"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -636,18 +537,8 @@
 		<Info
 			name="info3"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="East"
-			helpText="needed to configure your DNS service:"
+			helpText="The wizard collected the following parameters
+needed to configure your DNS service:"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -748,18 +639,7 @@
 		<Info
 			name="info5"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info17"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -802,18 +682,7 @@
 		<Info
 			name="info18"
 			alignement="Center"
-			helpText="The wizard successfully configured the DNS"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="Center"
-			helpText="services of your server."
+			helpText="The wizard successfully configured the DNS services of your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/firewall_wizard/firewall.wiz b/firewall_wizard/firewall.wiz
index b1d9b475..2f53b20d 100644
--- a/firewall_wizard/firewall.wiz
+++ b/firewall_wizard/firewall.wiz
@@ -91,18 +91,7 @@
 		<Info
 			name="info1"
 			alignement="Center"
-			helpText="The firewall protects your internal network from"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info2"
-			alignement="Center"
-			helpText="unauthorized accesses from the Internet."
+			helpText="The firewall protects your internal network from unauthorized accesses from the Internet."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -181,29 +170,7 @@
 		<Info
 			name="info9"
 			alignement="East"
-			helpText="The firewall can be configured to offer different levels of protection;"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info5"
-			alignement="East"
-			helpText="choose the level that corresponds to your needs.  If you don't know,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info10"
-			alignement="East"
-			helpText="the Medium level is usually the most appropriate."
+			helpText="The firewall can be configured to offer different levels of protection; choose the level that corresponds to your needs.  If you don't know, the Medium level is usually the most appropriate."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -310,18 +277,7 @@
 		<Info
 			name="info11"
 			alignement="East"
-			helpText="The firewall need to know how your server is connected to Internet;"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info13"
-			alignement="East"
-			helpText="choose the device you are using for the external connection."
+			helpText="The firewall need to know how your server is connected to Internet; choose the device you are using for the external connection."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -430,18 +386,8 @@
 		<Info
 			name="doneLabel"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info15"
-			alignement="East"
-			helpText="needed to configure your firewall:"
+			helpText="The wizard collected the following parameters
+needed to configure your firewall:"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -504,18 +450,7 @@
 		<Info
 			name="info18"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -558,18 +493,7 @@
 		<Info
 			name="successLabel"
 			alignement="Center"
-			helpText="The wizard successfully configured"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="Center"
-			helpText="your server firewall."
+			helpText="The wizard successfully configured your server firewall."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -592,7 +516,7 @@
 		<Info
 			name="catastrophe_text"
 			alignement="Center"
-			helpText="Some terrible happened"
+			helpText="Something terrible happened"
 			guiType="label"
 			fontName="Default"
 			fontStyle="italic"
@@ -690,18 +614,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the DNS configuration"
+			helpText="If you choose to configure now, you will automatically continue with the DNS configuration"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/ftp_wizard/ftp.wiz b/ftp_wizard/ftp.wiz
index e54c90c6..b42e2632 100644
--- a/ftp_wizard/ftp.wiz
+++ b/ftp_wizard/ftp.wiz
@@ -83,18 +83,7 @@
 		<Info
 			name="info3"
 			alignement="Center"
-			helpText="This wizard will help you configuring"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info4"
-			alignement="Center"
-			helpText="the FTP Server for your network."
+			helpText="This wizard will help you configuring the FTP Server for your network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -138,8 +127,7 @@
 		<Info
 			name="errorLabel"
 			alignement="Center"
-			helpText="Warning\nYou are in dhcp, server may doesn't
-			work with your configuration."
+			helpText="Warning\nYou are in dhcp, server may doesn't work with your configuration."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -181,18 +169,7 @@
 		<Info
 			name="info7"
 			alignement="East"
-			helpText="Your server can act as a FTP Server toward your internal"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info11"
-			alignement="East"
-			helpText="network (intranet) and as a FTP Server for the Internet."
+			helpText="Your server can act as a FTP Server toward your internal network (intranet) and as a FTP Server for the Internet."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -329,18 +306,8 @@
 		<Info
 			name="info14"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info15"
-			alignement="East"
-			helpText="needed to configure your FTP Server"
+			helpText="The wizard collected the following parameters
+needed to configure your FTP Server"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -403,18 +370,7 @@
 		<Info
 			name="info18"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -457,18 +413,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="The wizard successfully configured your"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info25"
-			alignement="Center"
-			helpText="Intranet/Internet FTP Server"
+			helpText="The wizard successfully configured your Intranet/Internet FTP Server"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/news_wizard/news.wiz b/news_wizard/news.wiz
index 00a5e728..fcc7f366 100644
--- a/news_wizard/news.wiz
+++ b/news_wizard/news.wiz
@@ -93,18 +93,7 @@
 		<Info
 			name="info1"
 			alignement="Center"
-			helpText="This wizard will help you configuring"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info2"
-			alignement="Center"
-			helpText="the Internet News services for your network."
+			helpText="This wizard will help you configuring the Internet News services for your network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -159,18 +148,7 @@
 		<Info
 			name="info4"
 			alignement="East"
-			helpText="The news server name is the name of the host providing the Internet"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info"
-			alignement="East"
-			helpText="news to your network; the name is usually provided by your provider."
+			helpText="The news server name is the name of the host providing the Internet news to your network; the name is usually provided by your provider."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -219,29 +197,7 @@
 		<Info
 			name="info13"
 			alignement="East"
-			helpText="Internet host names must be in the form \qhost.domain.domaintype\q; for"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info12"
-			alignement="East"
-			helpText="example, if your provider is \qprovider.com\q, the internet new server"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info11"
-			alignement="East"
-			helpText="is usually \qnews.provider.com\q."
+			helpText="Internet host names must be in the form \qhost.domain.domaintype\q; for example, if your provider is \qprovider.com\q, the internet new server is usually \qnews.provider.com\q."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -320,29 +276,7 @@
 		<Info
 			name="info18"
 			alignement="East"
-			helpText="Your server will regularly poll the News Server for obtaning the"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info20"
-			alignement="East"
-			helpText="latest Internet News; the polling period set the intervall between two"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="East"
-			helpText="consecutive polling."
+			helpText="Your server will regularly poll the News Server for obtaning the latest Internet News; the polling period set the intervall between two consecutive polling."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -384,18 +318,7 @@
 		<Info
 			name="info22"
 			alignement="East"
-			helpText="Depending on the kind of internet connection you have, an appropriate"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info23"
-			alignement="East"
-			helpText="polling period can change between 6 and 24 hours."
+			helpText="Depending on the kind of internet connection you have, an appropriate polling period can change between 6 and 24 hours."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -474,18 +397,8 @@
 		<Info
 			name="info25"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info26"
-			alignement="East"
-			helpText="needed to configure your Internet News Service:"
+			helpText="The wizard collected the following parameters
+needed to configure your Internet News Service:"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -550,18 +463,7 @@
 		<Info
 			name="doneLabel"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="cancelLabel"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -604,18 +506,7 @@
 		<Info
 			name="successLabel"
 			alignement="Center"
-			helpText="The wizard successfully configured your"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="Center"
-			helpText="Internet News service of your server."
+			helpText="The wizard successfully configured your Internet News service of your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -638,7 +529,7 @@
 		<Info
 			name="catastrophe_text"
 			alignement="Center"
-			helpText="Some terrible happened"
+			helpText="Something terrible happened"
 			guiType="label"
 			fontName="Default"
 			fontStyle="bold"
@@ -736,18 +627,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the NEWS configuration"
+			helpText="If you choose to configure now, you will automatically continue with the NEWS configuration"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/po/drakwizard.pot b/po/drakwizard.pot
index 575f462c..2b44fa7f 100644
--- a/po/drakwizard.pot
+++ b/po/drakwizard.pot
@@ -2,6 +2,10 @@
 # Copyright (C) 2002 Free Software Foundation, Inc.
 # wiz2po <adesmons@mandrakesoft.com> 2002.
 #
+# NOTE: sometimes "\q" appear in msgid around a word; the \q sequences
+# are for quote marks; put them in the translation too; or put proper
+# quotation marks for your language.
+#
 #, fuzzy
 msgid ""
 msgstr ""
@@ -14,425 +18,412 @@ msgstr ""
 "Content-Type: text/plain; charset=CHARSET\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-msgid "of the client available to other machines into your network."
+msgid ""
+"A client of your local network is a machine connected to the network having "
+"its own name and IP number."
 msgstr ""
 
-msgid "To accept these values, and add your client, click on"
+msgid "This is not a valid address... press next to continue"
 msgstr ""
 
 msgid ""
-"Press next to configure these parameters now, or Cancel to exit this wizard."
+"Press next if you want to change the already existing value, or back to "
+"correct your choice."
 msgstr ""
 
-msgid "OK"
+msgid "Congratulations"
 msgstr ""
 
-msgid "Name of the machine :"
+msgid "DNS Client Wizard"
 msgstr ""
 
-msgid "Your client on the network will be identified by  name, as in"
+msgid ""
+"The wizard collected the following parameters needed to add a client to your "
+"network:"
 msgstr ""
 
-msgid "DNS Client Wizard"
+msgid "System error, no configuration done"
 msgstr ""
 
-msgid "Client wizard"
+msgid "Client name"
 msgstr ""
 
-msgid "The wizard collected the following parameter"
+msgid "Adding a new client to your network"
 msgstr ""
 
-msgid "Press next to begin, or Cancel to leave this wizard."
+msgid "Configure"
 msgstr ""
 
-msgid "The wizard successfully added the client."
+msgid "Client identification:"
 msgstr ""
 
 msgid "(you don't need to type the domain after the name)"
 msgstr ""
 
-msgid "IP number of the machine :"
-msgstr ""
-
 msgid ""
-"You have to configure the basic network parameters before launch this wizard."
-msgstr ""
-
-msgid "Warning:"
+"If you choose to configure now, you will automatically continue with the "
+"Client configuration"
 msgstr ""
 
 msgid ""
-"Note that the given IP number and client name should be unique in the "
-"network."
+"The server will use the informations you enter here to make the name of the "
+"client available to other machines into your network."
 msgstr ""
 
-msgid "Adding a new client to your network"
-msgstr ""
-
-msgid "with the Client configuration"
-msgstr ""
-
-msgid "System error, no configuration done"
-msgstr ""
-
-msgid "Client identification:"
+msgid "You have entered a machine name or an IP number already used."
 msgstr ""
 
-msgid "If you choose to configure now, you will automatically continue"
+msgid "The wizard successfully added the client."
 msgstr ""
 
-msgid "This wizard will help you in adding a new client in your local DNS."
+msgid "Name of the machine:"
 msgstr ""
 
-msgid "This is not a valid address... press next to continue"
+msgid "OK"
 msgstr ""
 
-msgid "an (unique) IP address, in the usual dotted syntax."
+msgid ""
+"You have to configure the basic network parameters before launch this wizard."
 msgstr ""
 
-msgid "A client of your local network is a machine connected to the"
+msgid ""
+"Note that the given IP number and client name should be unique in the "
+"network."
 msgstr ""
 
-msgid "Client IP:"
+msgid ""
+"Your client on the network will be identified by  name, as in clientname."
+"company.net. Every machine on the network must have a (unique) IP address, "
+"in the usual dotted syntax."
 msgstr ""
 
-msgid "Configure"
+msgid "IP number of the machine:"
 msgstr ""
 
-msgid "\\qConfigure\\q or use the Back button to correct them."
+msgid "Quit"
 msgstr ""
 
-msgid "You need to be root to run this wizard"
+msgid "Network not configured yet"
 msgstr ""
 
-msgid "clientname.company.net. Every machine on the network must have"
+msgid "This wizard will help you in adding a new client in your local DNS."
 msgstr ""
 
-msgid "Network not configured yet"
+msgid "Press next to begin, or Cancel to leave this wizard."
 msgstr ""
 
-msgid "The server will use the informations you enter here to make the name"
+msgid ""
+"To accept these values, and add your client, click on \\qConfigure\\q or use "
+"the Back button to correct them."
 msgstr ""
 
-msgid "You have entered a machine name or an IP number already used."
+msgid ""
+"Press next to configure these parameters now, or Cancel to exit this wizard."
 msgstr ""
 
-msgid "Press next if you want to change the already existing value,"
+msgid "You need to be root to run this wizard"
 msgstr ""
 
-msgid "Quit"
+msgid "Client IP:"
 msgstr ""
 
-msgid "needed to add a client to your network:"
+msgid "Client wizard"
 msgstr ""
 
-msgid "Congratulations"
+msgid "Warning:"
 msgstr ""
 
-msgid "or back to correct your choice."
+msgid "Configuration Wizard"
 msgstr ""
 
-msgid "network having its own name and IP number."
+msgid "MySQL Database Server"
 msgstr ""
 
-msgid "Client name"
+msgid "Please enter a username and password to add a user"
 msgstr ""
 
 msgid "User addition"
 msgstr ""
 
-msgid "Please type a password for the root user:"
+msgid ""
+"To accept this value, and configure your server, click on \\qConfirm\\q or "
+"use the Back button to correct them."
 msgstr ""
 
-msgid "The wizard successfully configured your"
+msgid "The wizard successfully configured your MySQL Database Server"
 msgstr ""
 
-msgid "This wizard will help you configuring"
+msgid "Database Server"
 msgstr ""
 
-msgid "Configuring the MySQL Database Server"
+msgid "Root Password:"
 msgstr ""
 
 msgid "Confirm"
 msgstr ""
 
-msgid "Password:"
-msgstr ""
-
-msgid "with the MySQL Database configuration"
-msgstr ""
-
-msgid "Username:"
-msgstr ""
-
-msgid "\\qConfirm\\q or use the Back button to correct them."
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "To accept this value, and configure your server, click on"
-msgstr ""
-
 msgid "Sorry, you must be root to do this..."
 msgstr ""
 
-msgid "Database Server"
-msgstr ""
-
-msgid "Note: This user will have all permissions"
-msgstr ""
-
-msgid "MySQL Database wizard"
+msgid "Password:"
 msgstr ""
 
-msgid "Configuration Wizard"
+msgid ""
+"If you choose to configure now, you will automatically continue with the "
+"MySQL Database configuration"
 msgstr ""
 
-msgid "To run your server, you first need to specify a root password"
+msgid ""
+"This wizard will help you configuring the MySQL Database Server for your "
+"network."
 msgstr ""
 
-msgid "needed to configure your MySQL Database Server"
+msgid "Username:"
 msgstr ""
 
-msgid "Root Password:"
+msgid "Note: This user will have all permissions"
 msgstr ""
 
-msgid "MySQL Database Server"
+msgid "Add"
 msgstr ""
 
-msgid "Please enter a username and password to add a user"
+msgid "Please type a password for the root user:"
 msgstr ""
 
-msgid "the MySQL Database Server for your network."
+msgid "Configuring the MySQL Database Server"
 msgstr ""
 
-msgid "needed to configure your DHCP service:"
+msgid "To run your server, you first need to specify a root password"
 msgstr ""
 
-msgid "Fix it"
+msgid "MySQL Database wizard"
 msgstr ""
 
-msgid "Lowest IP Address:"
+msgid ""
+"The wizard collected the following parameters needed to configure your MySQL "
+"Database Server"
 msgstr ""
 
 msgid "IP addresses are a dotted list of four numbers smaller than 256."
 msgstr ""
 
-msgid "Select the range of addresses assigned to the workstations"
+msgid ""
+"Select the range of addresses assigned to the workstations by the DHCP "
+"service; unless you have special needs, you can safely accept the proposed "
+"values."
 msgstr ""
 
-msgid "DHCP Wizard"
+msgid "Highest IP Address:"
 msgstr ""
 
 msgid "Range of addresses used by dhcp"
 msgstr ""
 
-msgid "services of your server."
-msgstr ""
-
-msgid "The wizard successfully configured the DHCP"
-msgstr ""
-
-msgid "by the DHCP service; unless you have special needs,"
+msgid "Highest IP address:"
 msgstr ""
 
-msgid "Highest IP address:"
+msgid ""
+"DHCP is a service that automatically assigns networking addresses to your "
+"workstations."
 msgstr ""
 
-msgid "with the DHCP configuration"
+msgid "Fix it"
 msgstr ""
 
-msgid "Highest IP Address:"
+msgid ""
+"If you choose to configure now, you will automatically continue with the "
+"DHCP configuration"
 msgstr ""
 
-msgid "the DHCP services of your server."
+msgid "The wizard successfully configured the DHCP services of your server."
 msgstr ""
 
 msgid "SSystem error, no configuration done."
 msgstr ""
 
-msgid "The IP range specified is not correct"
+msgid "This wizard will help you configuring the DHCP services of your server."
 msgstr ""
 
-msgid "you can safely accept the proposed values."
+msgid ""
+"The wizard collected the following parameters needed to configure your DHCP "
+"service:"
 msgstr ""
 
-msgid "DHCP is a service that automatically assigns"
+msgid "Lowest  IP Address:"
 msgstr ""
 
-msgid "To accept these values, and configure your server, click on"
+msgid "Lowest IP Address:"
 msgstr ""
 
-msgid "networking addresses to your workstations."
+msgid "DHCP Configuration Wizard"
 msgstr ""
 
-msgid "Lowest  IP Address:"
+msgid "The IP range specified is not correct"
 msgstr ""
 
-msgid "DHCP Configuration Wizard"
+msgid ""
+"To accept these values, and configure your server, click on \\qConfigure\\q "
+"or use the Back button to correct them."
 msgstr ""
 
-msgid "Configuring the DHCP Server"
+msgid "DHCP Wizard"
 msgstr ""
 
-msgid "in correspondance a machine with an internet host name"
+msgid "Configuring the DHCP Server"
 msgstr ""
 
-msgid "provide a local DNS service for local computers names,"
+msgid "DNS Wizard"
 msgstr ""
 
-msgid "Your setting could be accepted, but you will not be able to identify"
+msgid ""
+"The wizard collected the following parameters needed to configure your DNS "
+"service:"
 msgstr ""
 
-msgid "DNS will allow your network to communicate with the Internet using"
+msgid "Configuring the DNS Server"
 msgstr ""
 
 msgid "Secondary DNS Address:"
 msgstr ""
 
-msgid "machine names outside your local network."
+msgid "DNS Server Addresses"
 msgstr ""
 
-msgid "DNS (Domain Name Server) is the service that put"
+msgid ""
+"This wizard will help you configuring the DNS services of your server. This "
+"configuration will provide a local DNS service for local computers names, "
+"with non-local requests forwarded to an outside DNS."
 msgstr ""
 
-msgid "with non-local requests forwarded to an outside DNS."
+msgid ""
+"DNS will allow your network to communicate with the Internet using standard "
+"internet host names.  In order to configure DNS, you must provide the IP "
+"address of primary and secondary DNS server; usually this address are given "
+"by your Internet provider."
 msgstr ""
 
-msgid "this address are given by your Internet provider."
+msgid "You have entered an empty address for the DNS server."
 msgstr ""
 
 msgid "Press next to leave these values empty, or back to enter a value."
 msgstr ""
 
-msgid "Primary DNS Address:"
-msgstr ""
-
-msgid "DNS Wizard"
-msgstr ""
-
-msgid "Configuring the DNS Server"
-msgstr ""
-
 msgid "DNS Configuration Wizard"
 msgstr ""
 
-msgid "The wizard successfully configured the DNS"
+msgid "Primary DNS Address:"
 msgstr ""
 
-msgid "This wizard will help you configuring the DNS"
+msgid ""
+"If you choose to configure now, you will automatically continue with the DNS "
+"configuration"
 msgstr ""
 
-msgid "with the DNS configuration"
+msgid ""
+"Your setting could be accepted, but you will not be able to identify machine "
+"names outside your local network."
 msgstr ""
 
-msgid "services of your server. This configuration will"
+msgid ""
+"DNS (Domain Name Server) is the service that put in correspondance a machine "
+"with an internet host name."
 msgstr ""
 
-msgid "needed to configure your DNS service:"
+msgid "The wizard successfully configured the DNS services of your server."
 msgstr ""
 
-msgid "You have entered an empty address for the DNS server."
-msgstr ""
-
-msgid "standard internet host names.  In order to configure DNS, you must"
+msgid "Device"
 msgstr ""
 
-msgid "DNS Server Addresses"
+msgid "Strong - no outside visibility, users limited to web"
 msgstr ""
 
-msgid "provide the IP address of primary and secondary DNS server; usually"
+msgid "Something terrible happened"
 msgstr ""
 
-msgid "The firewall can be configured to offer different levels of protection;"
+msgid "Firewall Configuration Wizard"
 msgstr ""
 
-msgid "the Medium level is usually the most appropriate."
+msgid "Internet Network Device:"
 msgstr ""
 
-msgid "Device"
+msgid "Fix It"
 msgstr ""
 
-msgid "Some terrible happened"
+msgid ""
+"The firewall need to know how your server is connected to Internet; choose "
+"the device you are using for the external connection."
 msgstr ""
 
 msgid "Firewall wizard"
 msgstr ""
 
-msgid "choose the level that corresponds to your needs.  If you don't know,"
+msgid "The wizard successfully configured your server firewall."
 msgstr ""
 
-msgid "The firewall protects your internal network from"
-msgstr ""
-
-msgid "The device name is not correct"
-msgstr ""
-
-msgid "unauthorized accesses from the Internet."
+msgid "Medium - web, ftp and ssh shown to outside"
 msgstr ""
 
 msgid "Protection Level"
 msgstr ""
 
-msgid "The wizard successfully configured"
-msgstr ""
-
-msgid "Firewall Network Device"
-msgstr ""
-
-msgid "Configuring the Firewall"
+msgid "Exit"
 msgstr ""
 
-msgid "This wizard will help you configuring your server firewall."
+msgid "The device name is not correct"
 msgstr ""
 
-msgid "needed to configure your firewall:"
+msgid ""
+"The firewall protects your internal network from unauthorized accesses from "
+"the Internet."
 msgstr ""
 
 msgid "This Wizard need to run as root"
 msgstr ""
 
-msgid "Medium - web, ftp and ssh shown to outside"
-msgstr ""
-
-msgid "Strong - no outside visibility, users limited to web"
+msgid "Configuring the Firewall"
 msgstr ""
 
 msgid "None - No protection"
 msgstr ""
 
-msgid "Internet Network Device:"
+msgid "This wizard will help you configuring your server firewall."
 msgstr ""
 
-msgid "choose the device you are using for the external connection."
+msgid "Low - Light filtering, standard services available"
 msgstr ""
 
-msgid "Protecion Level:"
+msgid "Firewall Network Device"
 msgstr ""
 
-msgid "Fix It"
+msgid "Protecion Level:"
 msgstr ""
 
-msgid "Firewall Configuration Wizard"
+msgid ""
+"The wizard collected the following parameters needed to configure your "
+"firewall:"
 msgstr ""
 
-msgid "The firewall need to know how your server is connected to Internet;"
+msgid ""
+"The firewall can be configured to offer different levels of protection; "
+"choose the level that corresponds to your needs.  If you don't know, the "
+"Medium level is usually the most appropriate."
 msgstr ""
 
-msgid "Exit"
+msgid "Select the kind of FTP service you want to activate:"
 msgstr ""
 
-msgid "your server firewall."
+msgid "Enable the FTP Server for the Intranet and for the Internet"
 msgstr ""
 
-msgid "Low - Light filtering, standard services available"
+msgid ""
+"Warning\\nYou are in dhcp, server may doesn't work with your configuration."
 msgstr ""
 
 msgid "Internet FTP Server:"
 msgstr ""
 
-msgid "Your server can act as a FTP Server toward your internal"
+msgid "The wizard successfully configured your Intranet/Internet FTP Server"
 msgstr ""
 
 msgid "Enable the FTP Server for the Intranet"
@@ -441,398 +432,251 @@ msgstr ""
 msgid "FTP wizard"
 msgstr ""
 
-msgid "Enable the FTP Server for the Intranet and for the Internet"
-msgstr ""
-
-msgid "FTP Server"
-msgstr ""
-
-msgid "Don't check any box if you don't want to activate your FTP Server."
-msgstr ""
-
-msgid "Configuring the FTP Server"
-msgstr ""
-
 msgid ""
-"Warning\\nYou are in dhcp, server may doesn't    work with your "
-"configuration."
-msgstr ""
-
-msgid "Intranet FTP Server:"
+"The wizard collected the following parameters needed to configure your FTP "
+"Server"
 msgstr ""
 
-msgid "the FTP Server for your network."
+msgid "This wizard will help you configuring the FTP Server for your network."
 msgstr ""
 
-msgid "Select the kind of FTP service you want to activate:"
-msgstr ""
-
-msgid "Intranet/Internet FTP Server"
-msgstr ""
-
-msgid "network (intranet) and as a FTP Server for the Internet."
+msgid ""
+"Your server can act as a FTP Server toward your internal network (intranet) "
+"and as a FTP Server for the Internet."
 msgstr ""
 
 msgid "FTP Server Configuration Wizard"
 msgstr ""
 
-msgid "needed to configure your FTP Server"
-msgstr ""
-
-msgid "Global"
-msgstr ""
-
-msgid "->dns"
-msgstr ""
-
-msgid "->mail"
-msgstr ""
-
-msgid "Ftp configuration wizard"
-msgstr ""
-
-msgid "Global Configuration Wizard"
-msgstr ""
-
-msgid "Press next to begin:"
-msgstr ""
-
-msgid "DHCP configuration wizard"
-msgstr ""
-
-msgid "Congratulations, your server have been"
-msgstr ""
-
-msgid "->firewall"
-msgstr ""
-
-msgid "->ftp"
-msgstr ""
-
-msgid "Domain Names wizard"
-msgstr ""
-
-msgid "This wizard will help you in configuring"
-msgstr ""
-
-msgid "->samba"
-msgstr ""
-
-msgid "The configuration process will involve the following steps:"
-msgstr ""
-
-msgid "Basic server wizard"
-msgstr ""
-
-msgid "Web configuration wizard"
-msgstr ""
-
-msgid "different services of your machine (DNS, Mail, DHCP...)."
-msgstr ""
-
-msgid "->News"
-msgstr ""
-
-msgid "->Server"
+msgid "Intranet FTP Server:"
 msgstr ""
 
-msgid "Mail configuration wizard"
+msgid "Configuring the FTP Server"
 msgstr ""
 
-msgid "correctly configured!"
+msgid "Don't check any box if you don't want to activate your FTP Server."
 msgstr ""
 
-msgid "Configuration tasks"
+msgid "FTP Server"
 msgstr ""
 
-msgid "->time"
+msgid "Welcome to the News Wizard"
 msgstr ""
 
-msgid "Welcome to the configuration wizard!"
+msgid "Polling Period (Hours):"
 msgstr ""
 
-msgid "->web"
+msgid "News Server"
 msgstr ""
 
-msgid "->Dhcp"
+msgid ""
+"Internet host names must be in the form \\qhost.domain.domaintype\\q; for "
+"example, if your provider is \\qprovider.com\\q, the internet new server is "
+"usually \\qnews.provider.com\\q."
 msgstr ""
 
-msgid "News configuration wizard"
+msgid "The news server name is not correct"
 msgstr ""
 
-msgid "[done]"
+msgid "Polling Interval:"
 msgstr ""
 
-msgid "Firewall configuration wizard"
+msgid ""
+"Depending on the kind of internet connection you have, an appropriate "
+"polling period can change between 6 and 24 hours."
 msgstr ""
 
-msgid "Time wizard"
+msgid ""
+"The wizard collected the following parameters needed to configure your "
+"Internet News Service:"
 msgstr ""
 
-msgid "Samba configuration wizard"
+msgid ""
+"This wizard will help you configuring the Internet News services for your "
+"network."
 msgstr ""
 
-msgid "Note however that you must be root to accomplish some of the tasks."
+msgid ""
+"The wizard successfully configured your Internet News service of your server."
 msgstr ""
 
 msgid "News Wizard"
 msgstr ""
 
-msgid "The polling period is not correct"
-msgstr ""
-
-msgid "Depending on the kind of internet connection you have, an appropriate"
-msgstr ""
-
-msgid "The news server name is the name of the host providing the Internet"
-msgstr ""
-
-msgid "Internet News service of your server."
-msgstr ""
-
-msgid "Configuring the Internet News"
-msgstr ""
-
-msgid "with the NEWS configuration"
-msgstr ""
-
-msgid "latest Internet News; the polling period set the intervall between two"
-msgstr ""
-
-msgid "News Server  Name:"
-msgstr ""
-
-msgid "needed to configure your Internet News Service:"
-msgstr ""
-
-msgid "consecutive polling."
-msgstr ""
-
-msgid "is usually \\qnews.provider.com\\q."
-msgstr ""
-
-msgid "news to your network; the name is usually provided by your provider."
+msgid "Polling Period"
 msgstr ""
 
-msgid "News Server"
+msgid "The polling period is not correct"
 msgstr ""
 
-msgid "Your server will regularly poll the News Server for obtaning the"
+msgid ""
+"The news server name is the name of the host providing the Internet news to "
+"your network; the name is usually provided by your provider."
 msgstr ""
 
 msgid "News Server:"
 msgstr ""
 
 msgid ""
-"example, if your provider is \\qprovider.com\\q, the internet new server"
-msgstr ""
-
-msgid "Polling Interval:"
-msgstr ""
-
-msgid "Polling Period"
+"Your server will regularly poll the News Server for obtaning the latest "
+"Internet News; the polling period set the intervall between two consecutive "
+"polling."
 msgstr ""
 
-msgid "polling period can change between 6 and 24 hours."
+msgid "News Server  Name:"
 msgstr ""
 
 msgid ""
-"Internet host names must be in the form \\qhost.domain.domaintype\\q; for"
-msgstr ""
-
-msgid "The news server name is not correct"
+"If you choose to configure now, you will automatically continue with the "
+"NEWS configuration"
 msgstr ""
 
-msgid "Polling Period (Hours):"
-msgstr ""
-
-msgid "Welcome to the News Wizard"
-msgstr ""
-
-msgid "the Internet News services for your network."
-msgstr ""
-
-msgid "with the POSTFIX configuration"
-msgstr ""
-
-msgid "needed to configure your Internet Mail Service:"
+msgid "Configuring the Internet News"
 msgstr ""
 
 msgid "Do It"
 msgstr ""
 
-msgid "See you soon!"
-msgstr ""
-
-msgid "This should be chosen consistently with the address"
-msgstr ""
-
-msgid "Hmmm"
-msgstr ""
-
-msgid "You entered an empty address for the mail gateway."
+msgid ""
+"You can select the kind of address that outgoing mail will show in the "
+"\\qFrom:\\q and \\qReply-to\\q field."
 msgstr ""
 
-msgid "Mail Server Name:"
+msgid "Configuring the Internet Mail"
 msgstr ""
 
 msgid "Postfix wizard"
 msgstr ""
 
-msgid "There seems to be a problem... go ask to the big black man downstairs"
-msgstr ""
-
-msgid "Configuring the Internet Mail"
-msgstr ""
-
 msgid ""
-"outside your local network. Press next to continue, or back to enter a value."
-msgstr ""
-
-msgid "the Internet Mail services for your network."
-msgstr ""
-
-msgid "Your choice can be accepted, but this will not allow you to send mail"
-msgstr ""
-
-msgid "Internet Mail Gateway"
+"Your server will send the outgoing through a mail gateway, that will take "
+"care of the final delivery."
 msgstr ""
 
 msgid ""
-"example, if your provider is \\qprovider.com\\q, the internet mail server"
+"This wizard will help you configuring the Internet Mail services for your "
+"network."
 msgstr ""
 
-msgid "Sorry, you have to be root to run this wizard..."
+msgid ""
+"This should be chosen consistently with the address you use for incoming "
+"mail."
 msgstr ""
 
 msgid "Outgoing Mail Address"
 msgstr ""
 
-msgid "End"
-msgstr ""
-
-msgid "Internet Mail Configuration Wizard"
-msgstr ""
-
-msgid "Internet Mail service of your server."
-msgstr ""
-
-msgid "will show in the \\qFrom:\\q and \\qReply-to\\q field."
-msgstr ""
-
-msgid "that will take care of the final delivery."
+msgid "There seems to be a problem... go ask to the big black man downstairs"
 msgstr ""
 
-msgid "You can select the kind of address that outgoing mail"
+msgid "Masquerade not good!"
 msgstr ""
 
-msgid "Masquerade not good!"
+msgid "Sorry, you have to be root to run this wizard..."
 msgstr ""
 
-msgid "is usually \\qsmtp.provider.com\\q."
+msgid ""
+"If you choose to configure now, you will automatically continue with the "
+"POSTFIX configuration"
 msgstr ""
 
 msgid "Form of the Address"
 msgstr ""
 
-msgid "Mail Address:"
+msgid ""
+"Internet host names must be in the form \\qhost.domain.domaintype\\q; for "
+"example, if your provider is \\qprovider.com\\q, the internet mail server is "
+"usually \\qsmtp.provider.com\\q."
 msgstr ""
 
-msgid "you use for incoming mail."
+msgid "Internet Mail Configuration Wizard"
 msgstr ""
 
-msgid "Your server will send the outgoing through a mail gateway,"
+msgid "End"
 msgstr ""
 
 msgid ""
-"Access will be allowed for hosts on the network. Here is the information "
-"found about your current local network, you can modify it if needed."
+"The wizard collected the following parameters needed to configure your "
+"Internet Mail Service:"
 msgstr ""
 
-msgid "Proxy Configuration Wizard"
+msgid "You entered an empty address for the mail gateway."
 msgstr ""
 
-msgid "Local Network - access for local network (recommended)"
+msgid "Mail Address:"
 msgstr ""
 
-msgid "You must choose a port greater than 1024 and lower than 65535"
+msgid ""
+"The wizard successfully configured your Internet Mail service of your server."
 msgstr ""
 
-msgid "Access Control:"
+msgid "Hmmm"
 msgstr ""
 
-msgid "Configuring the Proxy"
+msgid "Internet Mail Gateway"
 msgstr ""
 
-msgid "Define an upper level proxy"
+msgid "Mail Server Name:"
 msgstr ""
 
-msgid "Filesystem            Size  Used Avail Use% Mounted on"
+msgid ""
+"Your choice can be accepted, but this will not allow you to send mail "
+"outside your local network. Press next to continue, or back to enter a value."
 msgstr ""
 
-msgid "Upper level proxy port:"
+msgid "See you soon!"
 msgstr ""
 
 msgid ""
-"Disk Cache is the amount of disk space that can be used for caching on disk."
+"Memory Cache is the amount of RAM dedicated to cache memory operations (note "
+"that actual memory usage of the whole squid process is bigger)."
 msgstr ""
 
-msgid ""
-"You can safely select \\qNo upper level proxy\\q if you don\\'t need this "
-"feature."
+msgid "Proxy port:"
 msgstr ""
 
-msgid "Proxy Port"
+msgid "The wizard successfully configured your proxy server."
 msgstr ""
 
-msgid ""
-"You can use either a numeric format like \\q192.168.1.0/255.255.255.0\\q or "
-"a text format like \\q.domain.net\\q"
+msgid "You have entered a port that may be useful for this service:"
 msgstr ""
 
 msgid ""
-"Choose the level that suit to your needs. If you don\\'t know,the Local "
-"Network level is usually the most appropriate. Beware that the All level may "
-"be not secure."
+"Squid is a web caching proxy server, it allows faster web acces for your "
+"local network."
 msgstr ""
 
-msgid "You have entered a port that may be useful for this service:"
+msgid "Cache hierarchy"
 msgstr ""
 
-msgid "Cache hierarchy"
+msgid "Define an upper level proxy"
 msgstr ""
 
-msgid "Port:"
+msgid "All - No access restriction"
 msgstr ""
 
 msgid ""
-"As an option, Squid can be configured in proxy cascading. You can add a new "
-"upper level proxy by specifying its hostname and port."
+"Access will be allowed for hosts on the network. Here is the information "
+"found about your current local network, you can modify it if needed."
 msgstr ""
 
 msgid "Access Control"
 msgstr ""
 
-msgid "your proxy server."
+msgid "Disk space (MB):"
 msgstr ""
 
-msgid "For information, here is /var/spool/squid space on disk:"
+msgid "Upper level proxy hostname:"
 msgstr ""
 
 msgid ""
-"The wizard collected the following parameters needed to configure your proxy:"
-msgstr ""
-
-msgid "Memory cache (MB):"
-msgstr ""
-
-msgid "This wizard will help you configuring your proxy server."
+"Disk Cache is the amount of disk space that can be used for caching on disk."
 msgstr ""
 
-msgid "Proxy Cache Size"
+msgid "Local Network - access for local network (recommended)"
 msgstr ""
 
-msgid "No upper level proxy (recommended)"
+msgid "Configuring the Proxy"
 msgstr ""
 
 msgid ""
@@ -841,48 +685,35 @@ msgid ""
 "need to be greater than 1024."
 msgstr ""
 
-msgid "Press Next if you want to keep this value,"
-msgstr ""
-
-msgid "with the Proxy configuration."
-msgstr ""
-
-msgid "Press back to change the value."
-msgstr ""
-
-msgid "Grant acces on local network"
-msgstr ""
-
-msgid "Squid is a web caching proxy server, it allows"
-msgstr ""
-
 msgid "Squid wizard"
 msgstr ""
 
-msgid "Proxy port:"
+msgid "Port:"
 msgstr ""
 
-msgid "Disk space (MB):"
+msgid ""
+"You can safely select \\qNo upper level proxy\\q if you don\\'t need this "
+"feature."
 msgstr ""
 
-msgid "faster web acces for your local network."
+msgid "Filesystem            Size  Used Avail Use% Mounted on"
 msgstr ""
 
-msgid "Upper level proxy hostname:"
+msgid "Memory cache (MB):"
 msgstr ""
 
-msgid "All - No access restriction"
+msgid "Access Control:"
 msgstr ""
 
-msgid "Localhost - access restricted to this server only"
+msgid ""
+"If you choose to configure now, you will automatically continue with the "
+"Proxy configuration."
 msgstr ""
 
-msgid "or Back to correct your choice."
+msgid "Proxy Port"
 msgstr ""
 
-msgid ""
-"Memory Cache is the amount of RAM dedicated to cache memory operations (note "
-"that actual memory usage of the whole squid process is bigger)."
+msgid "Press back to change the value."
 msgstr ""
 
 msgid ""
@@ -890,82 +721,83 @@ msgid ""
 "the proxy to use."
 msgstr ""
 
-msgid "The proxy can be configured to use different access control levels."
-msgstr ""
-
-msgid "Authorised network:"
-msgstr ""
-
-msgid "Configuring Samba"
-msgstr ""
-
-msgid "The Server Banner  is incorrect"
-msgstr ""
-
-msgid "Server Banner."
+msgid "Grant acces on local network"
 msgstr ""
 
-msgid "Print Server:"
+msgid "No upper level proxy (recommended)"
 msgstr ""
 
-msgid "No Samba service has been requested"
+msgid "You must choose a port greater than 1024 and lower than 65535"
 msgstr ""
 
-msgid "Workgroup:"
+msgid "Proxy Cache Size"
 msgstr ""
 
-msgid "Samba need to know the Windows Workgroup it will serve."
+msgid ""
+"Press Next if you want to keep this value, or Back to correct your choice."
 msgstr ""
 
-msgid "Samba can provide a common file sharing area to your Windows"
+msgid "Localhost - access restricted to this server only"
 msgstr ""
 
-msgid "your Samba server."
+msgid ""
+"You can use either a numeric format like \\q192.168.1.0/255.255.255.0\\q or "
+"a text format like \\q.domain.net\\q"
 msgstr ""
 
-msgid "workstation, and can also provide printer sharing for the printers"
+msgid "Proxy Configuration Wizard"
 msgstr ""
 
-msgid "workstations."
+msgid "Authorised network:"
 msgstr ""
 
-msgid "the Samba services of your server."
+msgid ""
+"Choose the level that suit to your needs. If you don\\'t know,the Local "
+"Network level is usually the most appropriate. Beware that the All level may "
+"be not secure."
 msgstr ""
 
-msgid "Samba Configuration Wizard"
+msgid ""
+"As an option, Squid can be configured in proxy cascading. You can add a new "
+"upper level proxy by specifying its hostname and port."
 msgstr ""
 
-msgid "Press Quit to exit or Back to correct your choice"
+msgid ""
+"The wizard collected the following parameters needed to configure your proxy:"
 msgstr ""
 
-msgid "needed to configure Samba."
+msgid "The proxy can be configured to use different access control levels."
 msgstr ""
 
-msgid "Server Banner:"
+msgid "Upper level proxy port:"
 msgstr ""
 
-msgid "Enabled Samba Services"
+msgid "This wizard will help you configuring your proxy server."
 msgstr ""
 
-msgid "Enable Server Printer Sharing"
+msgid "For information, here is /var/spool/squid space on disk:"
 msgstr ""
 
-msgid "for workstations running non-Linux systems."
+msgid "Workgroup:"
 msgstr ""
 
-msgid "connected to your server."
+msgid ""
+"If you choose to configure now, you will automatically continue with the "
+"SAMBA configuration"
 msgstr ""
 
-msgid "Enable Common File Sharing Area"
+msgid "The Server Banner is incorrect"
 msgstr ""
 
-msgid "Samba allows your server to behave as a file and print server"
+msgid ""
+"This wizard will help you configuring the Samba services of your server."
 msgstr ""
 
-msgid "Samba wizard"
+msgid "Enabled Samba Services"
 msgstr ""
 
-msgid "The Workgroup is wrong"
+msgid ""
+"The wizard collected the following parameters needed to configure Samba."
 msgstr ""
 
 msgid "Banner:"
@@ -974,471 +806,270 @@ msgstr ""
 msgid "Workgroup"
 msgstr ""
 
-msgid "File Sharing:"
-msgstr ""
-
-msgid "The banner is the way this server will be described in the Windows"
-msgstr ""
-
-msgid "an access to outside world."
-msgstr ""
-
-msgid "Here is your current value for the external gateway (value specified"
-msgstr ""
-
-msgid "Network Address"
-msgstr ""
-
-msgid "connect to your network. It\\'s the device for the local network,"
-msgstr ""
-
-msgid "The server IP address is a number identifing your server in your"
-msgstr ""
-
-msgid "Note about networking"
-msgstr ""
-
-msgid "Server Address"
-msgstr ""
-
-msgid "External connection is a network from which the computer is"
-msgstr ""
-
-msgid "networking services of your server."
-msgstr ""
-
-msgid "The network address is a number identifing your network; the proposed"
-msgstr ""
-
-msgid "probably not the same device used for internet access."
-msgstr ""
-
-msgid "managing his own local network (C class network)."
-msgstr ""
-
-msgid "and redo the login."
-msgstr ""
-
-msgid "IP net address:"
-msgstr ""
-
-msgid "Note : the gateway IP address should be non empty if you want"
-msgstr ""
-
 msgid ""
-"Host names must be in the form \\qhost.domain.domaintype\\q; if your server"
-msgstr ""
-
-msgid "The host name is not correct"
-msgstr ""
-
-msgid "Wizard Error."
+"The banner is the way this server will be described in the Windows "
+"workstations."
 msgstr ""
 
-msgid "Computed domain Name"
-msgstr ""
-
-msgid "This page compute the domainname; it should be invisible"
-msgstr ""
-
-msgid "Devices are presented with the Linux name and,"
-msgstr ""
-
-msgid "Configuring  your network"
-msgstr ""
-
-msgid "separated by dots; the last number of the list must be zero."
+msgid "File Sharing:"
 msgstr ""
 
-msgid "the basic networking services of your server."
+msgid ""
+"Samba allows your server to behave as a file and print server for "
+"workstations running non-Linux systems."
 msgstr ""
 
-msgid "Choose the network device (usually a card) the server should use to"
+msgid "Configuring Samba"
 msgstr ""
 
-msgid "Server Address:"
+msgid "Server Banner."
 msgstr ""
 
-msgid "during the initial installation). The device (network card or modem)"
+msgid "The Workgroup is wrong"
 msgstr ""
 
-msgid "The hostname is the name under which your server will"
+msgid "Enable Common File Sharing Area"
 msgstr ""
 
-msgid "Network addresses are a list of four numbers smaller than 256,"
+msgid ""
+"Samba can provide a common file sharing area to your Windows workstation, "
+"and can also provide printer sharing for the printers connected to your "
+"server."
 msgstr ""
 
-msgid "will be an Internet server, the domain name should be the name"
+msgid "Samba need to know the Windows Workgroup it will serve."
 msgstr ""
 
-msgid "The wizard successfully configured the basic"
+msgid "The wizard successfully configured your Samba server."
 msgstr ""
 
-msgid "connected using IP masquerading; unless you know what you are doing,"
+msgid "Server Banner:"
 msgstr ""
 
-msgid "You should not run any  other applications while running this wizard"
+msgid "Print Server:"
 msgstr ""
 
-msgid "connected using another network card or a modem."
+msgid "Press Quit to exit or Back to correct your choice"
 msgstr ""
 
-msgid "Server Name:"
+msgid "No Samba service has been requested"
 msgstr ""
 
-msgid "should be different from the one used for the internal network."
+msgid "Samba wizard"
 msgstr ""
 
-msgid "Host Name:"
+msgid "Samba Configuration Wizard"
 msgstr ""
 
-msgid "Basic Network Configuration Wizard"
+msgid "Enable Server Printer Sharing"
 msgstr ""
 
 msgid ""
-"(you can change here these values if you know exactly what you\\'re doing)"
-msgstr ""
-
-msgid "The network address is wrong"
-msgstr ""
-
-msgid "Server IP address:"
-msgstr ""
-
-msgid "local network are DIFFERENT from the server \\qexternal\\q connection."
-msgstr ""
-
-msgid "and maybe on the Internet (depending of your upstream configuration)."
-msgstr ""
-
-msgid "any valid name is OK, like \\qcompany.net\\q."
+"You should not run any  other applications while running this wizard and at "
+"the end of the wizard you should exit your session and redo the login."
 msgstr ""
 
 msgid "The Server IP address is incorrect"
 msgstr ""
 
-msgid "Gateway IP:"
-msgstr ""
-
-msgid "and at the end of the wizard you should exit your session"
-msgstr ""
-
-msgid "be known from the other workstations in your network"
-msgstr ""
-
-msgid "client  (Internet or upstream network),"
-msgstr ""
-
-msgid "So, it\\'s very probable that domain name and IP adresses for this"
-msgstr ""
-
-msgid "needed to configure your network"
-msgstr ""
-
-msgid "The wizard collected the following parameters"
+msgid "Gateway device:"
 msgstr ""
 
 msgid "Server Wizard"
 msgstr ""
 
-msgid "value is designed for a configuration not connected to Internet, or"
-msgstr ""
-
-msgid "External gateway"
-msgstr ""
-
-msgid "network; the proposed value designed for a private network , with no"
-msgstr ""
-
-msgid "know what you are doing, accept the default value."
-msgstr ""
-
-msgid "internet visibility, or connected using IP masquerading; unless you"
+msgid ""
+"Network addresses are a list of four numbers smaller than 256, separated by "
+"dots; the last number of the list must be zero."
 msgstr ""
 
 msgid "net device"
 msgstr ""
 
-msgid "registered with your provider. If you will only have intranet"
-msgstr ""
-
-msgid "Gateway device:"
-msgstr ""
-
-msgid "As regards these wizards, your computer is seen as a server"
-msgstr ""
-
-msgid "This page compute the default server address; should be invisible."
-msgstr ""
-
-msgid "if known, with the card description."
+msgid ""
+"Here is your current value for the external gateway (value specified during "
+"the initial installation). The device (network card or modem) should be "
+"different from the one used for the internal network."
 msgstr ""
 
-msgid "This wizard will set the basic networking parameter of your server."
+msgid ""
+"The network address is a number identifing your network; the proposed value "
+"is designed for a configuration not connected to Internet, or connected "
+"using IP masquerading; unless you know what you are doing, accept the "
+"default value."
 msgstr ""
 
-msgid "Warning"
+msgid ""
+"As regards these wizards, your computer is seen as a server managing his own "
+"local network (C class network)."
 msgstr ""
 
 msgid "Device:"
 msgstr ""
 
-msgid "accept the default value."
-msgstr ""
-
-msgid "Host Name"
-msgstr ""
-
-msgid "Network Address:"
-msgstr ""
-
-msgid "Network Device"
-msgstr ""
-
-msgid "CRI, Campus d'Orsay, Universite Paris Sud, France"
-msgstr ""
-
-msgid "University of Manchester, Manchester, England"
-msgstr ""
-
-msgid "SCI, Universite de Limoges, France"
-msgstr ""
-
-msgid "(please, choose servers in your geographical area)"
-msgstr ""
-
-msgid "Your server can now act has a time server for your local network."
-msgstr ""
-
-msgid "If the time server is not immediately available"
-msgstr ""
-
-msgid "University of Regina, Regina, Saskatchewan, Canada"
-msgstr ""
-
-msgid "Internet time setting (external time server)"
-msgstr ""
-
-msgid "Secondary Time Server:"
-msgstr ""
-
-msgid "Try again"
-msgstr ""
-
-msgid "The Chinese University of Hong Kong"
-msgstr ""
-
-msgid "UNLV College of Engineering, Las Vegas, NV"
-msgstr ""
-
-msgid "Altea (Alicante/SPAIN)"
-msgstr ""
-
-msgid "Press next. otherwise, press \\qback\\q to set the local time only,"
-msgstr ""
-
-msgid "CISM, Lyon, France"
-msgstr ""
-
-msgid "Inet, Inc., Seoul, Korea"
-msgstr ""
-
-msgid "Scientific Center in Chernogolovka, Moscow region, Russia"
+msgid "Warning"
 msgstr ""
 
-msgid "Sorry, you must be root to run this wizard"
+msgid "This page compute the domainname; it should be invisible"
 msgstr ""
 
 msgid ""
-"If you use a time server, your machine will ask to that server the correct "
-"time."
+"So, it\\'s very probable that domain name and IP adresses for this local "
+"network are DIFFERENT from the server \\qexternal\\q connection."
 msgstr ""
 
-msgid "The time servers are not responding. The causes could be:"
-msgstr ""
-
-msgid "Local time setting"
-msgstr ""
-
-msgid "- other reasons..."
-msgstr ""
-
-msgid "please, install ntp manually if you can,"
-msgstr ""
-
-msgid "WARNING"
-msgstr ""
-
-msgid "with the TIME configuration"
-msgstr ""
-
-msgid "Fukuoka university, Fukuoka, Japan"
-msgstr ""
-
-msgid "Swiss Fed. Inst. of Technology"
-msgstr ""
-
-msgid "LAAS/CNRS, Toulouse, France"
-msgstr ""
-
-msgid "This wizard will help you to set the time of your server,"
-msgstr ""
-
-msgid "WARNING:"
-msgstr ""
-
-msgid "or cancel to exit this wizard."
-msgstr ""
-
-msgid "Click next to install that tools,"
-msgstr ""
-
-msgid "MIT Information Systems, Cambridge, MA"
-msgstr ""
-
-msgid "Dept. Computer Science, Strathclyde University, Glasgow, Scotland"
-msgstr ""
-
-msgid "Baylor College of Medicine, Houston, Tx"
-msgstr ""
-
-msgid "Penn State University, University Park, PA"
-msgstr ""
-
-msgid "University of Oslo, Norway"
-msgstr ""
-
-msgid "- no outside network"
-msgstr ""
-
-msgid "Type of setting"
+msgid "Server Address:"
 msgstr ""
 
-msgid "Choose a time zone:"
+msgid "Computed domain Name"
 msgstr ""
 
-msgid "Computer Science Department, University of Wisconsin-Madison"
+msgid "Host Name"
 msgstr ""
 
-msgid "Testing  the time servers availability"
+msgid "This page compute the default server address; should be invisible."
 msgstr ""
 
-msgid "Canadian Meteorological Centre, Dorval, Quebec, Canada"
+msgid "Basic Network Configuration Wizard"
 msgstr ""
 
-msgid "Press next to start the time servers test."
+msgid "The host name is not correct"
 msgstr ""
 
 msgid ""
-"You can set the time of your machine in two ways: Locally means that the "
-"setting"
-msgstr ""
-
-msgid "University of Oklahoma, Norman, Oklahoma, USA"
+"Host names must be in the form \\qhost.domain.domaintype\\q; if your server "
+"will be an Internet server, the domain name should be the name registered "
+"with your provider. If you will only have intranet any valid name is OK, "
+"like \\qcompany.net\\q."
 msgstr ""
 
-msgid "Cant install the NTP tools!"
+msgid "External gateway"
 msgstr ""
 
-msgid "Singapore"
+msgid ""
+"This wizard will help you configuring the basic networking services of your "
+"server."
 msgstr ""
 
-msgid "Trinity College, Dublin, Ireland"
+msgid "This wizard will set the basic networking parameter of your server."
 msgstr ""
 
-msgid "National Research Council of Canada, Ottawa, Ontario, Canada"
+msgid "Note about networking"
 msgstr ""
 
-msgid "Washington State University Tri-Cities, Richland, Wa"
+msgid ""
+"Choose the network device (usually a card) the server should use to connect "
+"to your network. It\\'s the device for the local network, probably not the "
+"same device used for internet access."
 msgstr ""
 
-msgid "University of Adelaide, South Australia"
+msgid ""
+"Note: the gateway IP address should be non empty if you want an access to "
+"outside world."
 msgstr ""
 
-msgid "CRIUC, Universite de Caen, France"
+msgid "Wizard Error."
 msgstr ""
 
 msgid ""
-"will simply set the system clock, without synchronizing with the external "
-"world"
+"Devices are presented with the Linux name and, if known, with the card "
+"description."
 msgstr ""
 
-msgid "- non existant time servers"
+msgid "Network Address:"
 msgstr ""
 
-msgid "back to return,"
+msgid "Configuring your network"
 msgstr ""
 
-msgid "Loria, Nancy, France"
+msgid "Gateway IP:"
 msgstr ""
 
-msgid "If you want to continue (and you know what you are doing)"
+msgid ""
+"The hostname is the name under which your server will be known from the "
+"other workstations in your network and maybe on the Internet (depending of "
+"your upstream configuration)."
 msgstr ""
 
-msgid "Time Servers"
+msgid "Host Name:"
 msgstr ""
 
-msgid "(network or other reason), you will wait about 30 seconds"
+msgid ""
+"The wizard collected the following parameters needed to configure your "
+"network"
 msgstr ""
 
-msgid "either locally or synchronized with an external time server."
+msgid ""
+"External connection is a network from which the computer is client (Internet "
+"or upstream network), connected using another network card or a modem."
 msgstr ""
 
-msgid "Save config without test"
+msgid ""
+"The server IP address is a number identifing your server in your network; "
+"the proposed value designed for a private network , with no internet "
+"visibility, or connected using IP masquerading; unless you know what you are "
+"doing, accept the default value."
 msgstr ""
 
-msgid "Select a primary and secondary server from the list, or specify one:"
+msgid "Server Name:"
 msgstr ""
 
-msgid "or insert the CDROM containing it"
+msgid "The network address is wrong"
 msgstr ""
 
-msgid "No network have been detected."
+msgid "Server Address"
 msgstr ""
 
-msgid "or save configuration without actually setting time."
+msgid ""
+"(you can change here these values if you know exactly what you\\'re doing)"
 msgstr ""
 
-msgid "You can try again to contact time servers,"
+msgid ""
+"The wizard successfully configured the basic networking services of your "
+"server."
 msgstr ""
 
-msgid "Which kind of setting would you like to do?"
+msgid "Network Device"
 msgstr ""
 
-msgid "Thus your server will be the local time server for your network."
+msgid "IP net address:"
 msgstr ""
 
-msgid "Primary Time Server:"
+msgid "Network Address"
 msgstr ""
 
-msgid "WARNING: the net time tool arent there."
+msgid "Server IP address:"
 msgstr ""
 
-msgid "Time server configuration saved"
+msgid ""
+"Your server can act as a Web Server toward your internal network (intranet) "
+"and as a Web Server for the Internet."
 msgstr ""
 
-msgid "Time configuration wizard"
+msgid "Intranet Web Server:"
 msgstr ""
 
-msgid "press next to begin, or cancel to leave this wizard"
+msgid "Select the kind of Web service you want to activate:"
 msgstr ""
 
-msgid "Intranet Web Server:"
+msgid "Don't check any box if you don't want to activate your Web Server."
 msgstr ""
 
-msgid "Intranet/Internet Web Server"
+msgid "The wizard successfully configured your Intranet/Internet Web Server"
 msgstr ""
 
-msgid "Enable the Web Server for the Intranet"
+msgid ""
+"The wizard collected the following parameters needed to configure your Web "
+"Server"
 msgstr ""
 
-msgid "Internet Web Server:"
+msgid "Web wizard"
 msgstr ""
 
 msgid "Configuring the Web Server"
 msgstr ""
 
-msgid "network (intranet) and as a Web Server for the Internet."
+msgid "Web Server Configuration Wizard"
 msgstr ""
 
 msgid "Web Server"
@@ -1447,23 +1078,11 @@ msgstr ""
 msgid "Enable the Web Server for the Intranet and for the Internet"
 msgstr ""
 
-msgid "Web wizard"
-msgstr ""
-
-msgid "Your server can act as a Web Server toward your internal"
-msgstr ""
-
-msgid "needed to configure your Web Server"
-msgstr ""
-
-msgid "the Web Server for your network."
-msgstr ""
-
-msgid "Don't check any box if you don't want to activate your Web Server."
+msgid "This wizard will help you configuring the Web Server for your network."
 msgstr ""
 
-msgid "Select the kind of Web service you want to activate:"
+msgid "Internet Web Server:"
 msgstr ""
 
-msgid "Web Server Configuration Wizard"
+msgid "Enable the Web Server for the Intranet"
 msgstr ""
diff --git a/postfix_wizard/postfix.wiz b/postfix_wizard/postfix.wiz
index 6b494342..60ace540 100644
--- a/postfix_wizard/postfix.wiz
+++ b/postfix_wizard/postfix.wiz
@@ -88,18 +88,7 @@
 		<Info
 			name="info2"
 			alignement="Center"
-			helpText="This wizard will help you configuring"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info3"
-			alignement="Center"
-			helpText="the Internet Mail services for your network."
+			helpText="This wizard will help you configuring the Internet Mail services for your network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -224,18 +213,7 @@
 		<Info
 			name="info9"
 			alignement="East"
-			helpText="You can select the kind of address that outgoing mail"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info10"
-			alignement="East"
-			helpText="will show in the \qFrom:\q and \qReply-to\q field."
+			helpText="You can select the kind of address that outgoing mail will show in the \qFrom:\q and \qReply-to\q field."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -283,18 +261,7 @@
 		<Info
 			name="info35"
 			alignement="East"
-			helpText="This should be chosen consistently with the address"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info36"
-			alignement="East"
-			helpText="you use for incoming mail."
+			helpText="This should be chosen consistently with the address you use for incoming mail."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -371,18 +338,7 @@
 		<Info
 			name="info15"
 			alignement="East"
-			helpText="Your server will send the outgoing through a mail gateway,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info16"
-			alignement="East"
-			helpText="that will take care of the final delivery."
+			helpText="Your server will send the outgoing through a mail gateway, that will take care of the final delivery."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -429,29 +385,7 @@
 		<Info
 			name="info1"
 			alignement="East"
-			helpText="Internet host names must be in the form \qhost.domain.domaintype\q; for"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info7"
-			alignement="East"
-			helpText="example, if your provider is \qprovider.com\q, the internet mail server"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info13"
-			alignement="East"
-			helpText="is usually \qsmtp.provider.com\q."
+			helpText="Internet host names must be in the form \qhost.domain.domaintype\q; for example, if your provider is \qprovider.com\q, the internet mail server is usually \qsmtp.provider.com\q."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -504,18 +438,7 @@
 		<Info
 			name="info373"
 			alignement="Center"
-			helpText="Your choice can be accepted, but this will not allow you to send mail"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info38"
-			alignement="Center"
-			helpText="outside your local network. Press next to continue, or back to enter a value."
+			helpText="Your choice can be accepted, but this will not allow you to send mail outside your local network. Press next to continue, or back to enter a value."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -571,18 +494,8 @@
 		<Info
 			name="info19"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info28"
-			alignement="East"
-			helpText="needed to configure your Internet Mail Service:"
+			helpText="The wizard collected the following parameters
+needed to configure your Internet Mail Service:"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -645,18 +558,7 @@
 		<Info
 			name="info20"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info30"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -773,18 +675,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the POSTFIX configuration"
+			helpText="If you choose to configure now, you will automatically continue with the POSTFIX configuration"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -838,18 +729,7 @@
 		<Info
 			name="info26"
 			alignement="Center"
-			helpText="The wizard successfully configured your"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info33"
-			alignement="Center"
-			helpText="Internet Mail service of your server."
+			helpText="The wizard successfully configured your Internet Mail service of your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/proxy_wizard/proxy.wiz b/proxy_wizard/proxy.wiz
index fa392495..cf875e3b 100644
--- a/proxy_wizard/proxy.wiz
+++ b/proxy_wizard/proxy.wiz
@@ -168,18 +168,7 @@
 		<Info
 			name="info1"
 			alignement="Center"
-			helpText="Squid is a web caching proxy server, it allows"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info2"
-			alignement="Center"
-			helpText="faster web acces for your local network."
+			helpText="Squid is a web caching proxy server, it allows faster web acces for your local network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -785,18 +774,7 @@
 		<Info
 			name="info203"
 			alignement="Center"
-			helpText="Press Next if you want to keep this value,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info22"
-			alignement="Center"
-			helpText="or Back to correct your choice."
+			helpText="Press Next if you want to keep this value, or Back to correct your choice."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1268,18 +1246,7 @@
 		<Info
 			name="info18"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1435,18 +1402,7 @@
 		<Info
 			name="info18"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1489,18 +1445,7 @@
 		<Info
 			name="successLabel"
 			alignement="Center"
-			helpText="The wizard successfully configured"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="Center"
-			helpText="your proxy server."
+			helpText="The wizard successfully configured your proxy server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1523,7 +1468,7 @@
 		<Info
 			name="catastrophe_text"
 			alignement="Center"
-			helpText="Some terrible happened"
+			helpText="Something terrible happened"
 			guiType="label"
 			fontName="Default"
 			fontStyle="italic"
@@ -1703,18 +1648,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the Proxy configuration."
+			helpText="If you choose to configure now, you will automatically continue with the Proxy configuration."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/samba_wizard/samba.wiz b/samba_wizard/samba.wiz
index 4fab68b0..2e4ca149 100644
--- a/samba_wizard/samba.wiz
+++ b/samba_wizard/samba.wiz
@@ -110,18 +110,7 @@
 		<Info
 			name="info1"
 			alignement="Center"
-			helpText="Samba allows your server to behave as a file and print server"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info"
-			alignement="Center"
-			helpText="for workstations running non-Linux systems."
+			helpText="Samba allows your server to behave as a file and print server for workstations running non-Linux systems."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -132,18 +121,7 @@
 		<Info
 			name="info11"
 			alignement="Center"
-			helpText="This wizard will help you configuring"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info2"
-			alignement="Center"
-			helpText="the Samba services of your server."
+			helpText="This wizard will help you configuring the Samba services of your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -198,29 +176,7 @@
 		<Info
 			name="info17"
 			alignement="East"
-			helpText="Samba can provide a common file sharing area to your Windows"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info18"
-			alignement="East"
-			helpText="workstation, and can also provide printer sharing for the printers"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="East"
-			helpText="connected to your server."
+			helpText="Samba can provide a common file sharing area to your Windows workstation, and can also provide printer sharing for the printers connected to your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -454,18 +410,7 @@
 		<Info
 			name="info23"
 			alignement="East"
-			helpText="The banner is the way this server will be described in the Windows"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info24"
-			alignement="East"
-			helpText="workstations."
+			helpText="The banner is the way this server will be described in the Windows workstations."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -514,7 +459,7 @@
 		<Info
 			name="serverErrorMessage"
 			alignement="Center"
-			helpText="The Server Banner  is incorrect"
+			helpText="The Server Banner is incorrect"
 			guiType="label"
 			fontName="Default"
 			fontStyle="bold"
@@ -570,18 +515,8 @@
 		<Info
 			name="doneLabel"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="East"
-			helpText="needed to configure Samba."
+			helpText="The wizard collected the following parameters
+needed to configure Samba."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -666,18 +601,7 @@
 		<Info
 			name="info29"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="cancelLabel"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -720,18 +644,7 @@
 		<Info
 			name="successLabel"
 			alignement="Center"
-			helpText="The wizard successfully configured"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="Center"
-			helpText="your Samba server."
+			helpText="The wizard successfully configured your Samba server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -743,7 +656,7 @@
 	<Page
 		helpURL="file:/usr/share/doc/mandrake/${LANG}/ref.html/wiz-samba.html"
 		name="catastrophic_exit"
-		comment="Exit in case of catastrophhic system error"
+		comment="Exit in case of catastrophic system error"
 		nextButtonText="Exit"
 		executionLevel="NORMAL"
 		nextFinish="true"
@@ -754,7 +667,7 @@
 		<Info
 			name="catastrophe_text"
 			alignement="Center"
-			helpText="Some terrible happened"
+			helpText="Something terrible happened"
 			guiType="label"
 			fontName="ZapfDingbats"
 			fontStyle="italic"
@@ -852,18 +765,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="If you choose to configure now, you will automatically continue"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="Center"
-			helpText="with the SAMBA configuration"
+			helpText="If you choose to configure now, you will automatically continue with the SAMBA configuration"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/server_wizard/server.wiz b/server_wizard/server.wiz
index bf39262d..91f673e1 100644
--- a/server_wizard/server.wiz
+++ b/server_wizard/server.wiz
@@ -143,18 +143,7 @@
 		<Info
 			name="info1"
 			alignement="Center"
-			helpText="This wizard will help you configuring"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info2"
-			alignement="Center"
-			helpText="the basic networking services of your server."
+			helpText="This wizard will help you configuring the basic networking services of your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -228,29 +217,7 @@
 		<Info
 			name="info46"
 			alignement="Center"
-			helpText="You should not run any  other applications while running this wizard"
-			guiType="label"
-			fontName="Default"
-			fontStyle="italic"
-			fontSize="14"
-		>
-		</Info>
-
-		<Info
-			name="info47"
-			alignement="Center"
-			helpText="and at the end of the wizard you should exit your session"
-			guiType="label"
-			fontName="Default"
-			fontStyle="italic"
-			fontSize="14"
-		>
-		</Info>
-
-		<Info
-			name="info48"
-			alignement="Center"
-			helpText="and redo the login."
+			helpText="You should not run any  other applications while running this wizard and at the end of the wizard you should exit your session and redo the login."
 			guiType="label"
 			fontName="Default"
 			fontStyle="italic"
@@ -293,18 +260,7 @@
 		<Info
 			name="info44"
 			alignement="East"
-			helpText="As regards these wizards, your computer is seen as a server"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info45"
-			alignement="East"
-			helpText="managing his own local network (C class network)."
+			helpText="As regards these wizards, your computer is seen as a server managing his own local network (C class network)."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -315,18 +271,7 @@
 		<Info
 			name="info46"
 			alignement="East"
-			helpText="So, it\'s very probable that domain name and IP adresses for this"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info47"
-			alignement="East"
-			helpText="local network are DIFFERENT from the server \qexternal\q connection."
+			helpText="So, it\'s very probable that domain name and IP adresses for this local network are DIFFERENT from the server \qexternal\q connection."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -337,29 +282,7 @@
 		<Info
 			name="info48"
 			alignement="East"
-			helpText="External connection is a network from which the computer is"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info49"
-			alignement="East"
-			helpText="client  (Internet or upstream network),"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info50"
-			alignement="East"
-			helpText="connected using another network card or a modem."
+			helpText="External connection is a network from which the computer is client (Internet or upstream network), connected using another network card or a modem."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -442,29 +365,7 @@
 		<Info
 			name="info13"
 			alignement="East"
-			helpText="The hostname is the name under which your server will"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info8"
-			alignement="East"
-			helpText="be known from the other workstations in your network"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info7"
-			alignement="East"
-			helpText="and maybe on the Internet (depending of your upstream configuration)."
+			helpText="The hostname is the name under which your server will be known from the other workstations in your network and maybe on the Internet (depending of your upstream configuration)."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -514,40 +415,7 @@
 		<Info
 			name="info19"
 			alignement="East"
-			helpText="Host names must be in the form \qhost.domain.domaintype\q; if your server"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info18"
-			alignement="East"
-			helpText="will be an Internet server, the domain name should be the name"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info17"
-			alignement="East"
-			helpText="registered with your provider. If you will only have intranet"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info20"
-			alignement="East"
-			helpText="any valid name is OK, like \qcompany.net\q."
+			helpText="Host names must be in the form \qhost.domain.domaintype\q; if your server will be an Internet server, the domain name should be the name registered with your provider. If you will only have intranet any valid name is OK, like \qcompany.net\q."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -613,29 +481,7 @@
 		<Info
 			name="info37"
 			alignement="East"
-			helpText="Choose the network device (usually a card) the server should use to"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info38"
-			alignement="East"
-			helpText="connect to your network. It\'s the device for the local network,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info40"
-			alignement="East"
-			helpText="probably not the same device used for internet access."
+			helpText="Choose the network device (usually a card) the server should use to connect to your network. It\'s the device for the local network, probably not the same device used for internet access."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -685,18 +531,7 @@
 		<Info
 			name="info42"
 			alignement="East"
-			helpText="Devices are presented with the Linux name and,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info41"
-			alignement="East"
-			helpText="if known, with the card description."
+			helpText="Devices are presented with the Linux name and, if known, with the card description."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -834,40 +669,7 @@
 		<Info
 			name="info24"
 			alignement="East"
-			helpText="The network address is a number identifing your network; the proposed"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info25"
-			alignement="East"
-			helpText="value is designed for a configuration not connected to Internet, or"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info26"
-			alignement="East"
-			helpText="connected using IP masquerading; unless you know what you are doing,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info27"
-			alignement="East"
-			helpText="accept the default value."
+			helpText="The network address is a number identifing your network; the proposed value is designed for a configuration not connected to Internet, or connected using IP masquerading; unless you know what you are doing, accept the default value."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -916,18 +718,7 @@
 		<Info
 			name="info28"
 			alignement="East"
-			helpText="Network addresses are a list of four numbers smaller than 256,"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info4"
-			alignement="East"
-			helpText="separated by dots; the last number of the list must be zero."
+			helpText="Network addresses are a list of four numbers smaller than 256, separated by dots; the last number of the list must be zero."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1097,40 +888,7 @@
 		<Info
 			name="info33"
 			alignement="East"
-			helpText="The server IP address is a number identifing your server in your"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info32"
-			alignement="East"
-			helpText="network; the proposed value designed for a private network , with no"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info31"
-			alignement="East"
-			helpText="internet visibility, or connected using IP masquerading; unless you"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info30"
-			alignement="East"
-			helpText="know what you are doing, accept the default value."
+			helpText="The server IP address is a number identifing your server in your network; the proposed value designed for a private network , with no internet visibility, or connected using IP masquerading; unless you know what you are doing, accept the default value."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1244,29 +1002,7 @@
 		<Info
 			name="info56"
 			alignement="East"
-			helpText="Here is your current value for the external gateway (value specified"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info60"
-			alignement="East"
-			helpText="during the initial installation). The device (network card or modem)"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info55"
-			alignement="East"
-			helpText="should be different from the one used for the internal network."
+			helpText="Here is your current value for the external gateway (value specified during the initial installation). The device (network card or modem) should be different from the one used for the internal network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1277,18 +1013,7 @@
 		<Info
 			name="info52"
 			alignement="East"
-			helpText="Note : the gateway IP address should be non empty if you want"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info54"
-			alignement="East"
-			helpText="an access to outside world."
+			helpText="Note: the gateway IP address should be non empty if you want an access to outside world."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1372,7 +1097,7 @@
 		<Info
 			name="doitTitle"
 			alignement="Center"
-			helpText="Configuring  your network"
+			helpText="Configuring your network"
 			guiType="label"
 			fontName="Default"
 			fontStyle="bold"
@@ -1393,18 +1118,7 @@
 		<Info
 			name="explication1"
 			alignement="East"
-			helpText="The wizard collected the following parameters"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="explication2"
-			alignement="East"
-			helpText="needed to configure your network"
+			helpText="The wizard collected the following parameters needed to configure your network"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1537,18 +1251,7 @@
 		<Info
 			name="doneLabel"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="cancelLabel"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -1614,18 +1317,7 @@
 		<Info
 			name="successLabel"
 			alignement="Center"
-			helpText="The wizard successfully configured the basic"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info6"
-			alignement="Center"
-			helpText="networking services of your server."
+			helpText="The wizard successfully configured the basic networking services of your server."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
diff --git a/web_wizard/web.wiz b/web_wizard/web.wiz
index 995b7aaa..d25154cc 100644
--- a/web_wizard/web.wiz
+++ b/web_wizard/web.wiz
@@ -83,18 +83,7 @@
 		<Info
 			name="info3"
 			alignement="Center"
-			helpText="This wizard will help you configuring"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info4"
-			alignement="Center"
-			helpText="the Web Server for your network."
+			helpText="This wizard will help you configuring the Web Server for your network."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -138,8 +127,7 @@
 		<Info
 			name="errorLabel"
 			alignement="Center"
-			helpText="Warning\nYou are in dhcp, server may doesn't
-			work with your configuration."
+			helpText="Warning\nYou are in dhcp, server may doesn't work with your configuration."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -192,18 +180,7 @@
 		<Info
 			name="info7"
 			alignement="East"
-			helpText="Your server can act as a Web Server toward your internal"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info11"
-			alignement="East"
-			helpText="network (intranet) and as a Web Server for the Internet."
+			helpText="Your server can act as a Web Server toward your internal network (intranet) and as a Web Server for the Internet."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -340,18 +317,8 @@
 		<Info
 			name="info14"
 			alignement="East"
-			helpText="The wizard collected the following parameter"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info15"
-			alignement="East"
-			helpText="needed to configure your Web Server"
+			helpText="The wizard collected the following parameters
+needed to configure your Web Server"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -414,18 +381,7 @@
 		<Info
 			name="info18"
 			alignement="East"
-			helpText="To accept these values, and configure your server, click on"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info19"
-			alignement="East"
-			helpText="\qConfigure\q or use the Back button to correct them."
+			helpText="To accept these values, and configure your server, click on \qConfigure\q or use the Back button to correct them."
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"
@@ -468,18 +424,7 @@
 		<Info
 			name="info24"
 			alignement="Center"
-			helpText="The wizard successfully configured your"
-			guiType="label"
-			fontName="Default"
-			fontStyle="plain"
-			fontSize="11"
-		>
-		</Info>
-
-		<Info
-			name="info25"
-			alignement="Center"
-			helpText="Intranet/Internet Web Server"
+			helpText="The wizard successfully configured your Intranet/Internet Web Server"
 			guiType="label"
 			fontName="Default"
 			fontStyle="plain"